diff options
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
| -rw-r--r-- | drivers/ata/pata_hpt37x.c | 245 |
1 files changed, 52 insertions, 193 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 9a10878b2ad8..42163998de9a 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -283,7 +283,7 @@ static unsigned long hpt370_filter(struct ata_device *adev, unsigned long mask) if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) mask &= ~(0xE0 << ATA_SHIFT_UDMA); } - return ata_pci_default_filter(adev, mask); + return ata_bmdma_mode_filter(adev, mask); } /** @@ -299,7 +299,7 @@ static unsigned long hpt370a_filter(struct ata_device *adev, unsigned long mask) if (hpt_dma_blacklisted(adev, "UDMA100", bad_ata100_5)) mask &= ~(0xE0 << ATA_SHIFT_UDMA); } - return ata_pci_default_filter(adev, mask); + return ata_bmdma_mode_filter(adev, mask); } /** @@ -338,22 +338,10 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline) pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(link, deadline); + return ata_sff_prereset(link, deadline); } -/** - * hpt37x_error_handler - reset the hpt374 - * @ap: ATA port to reset - * - * Perform probe for HPT37x, except for HPT374 channel 2 - */ - -static void hpt37x_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); -} - -static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline) +static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits hpt37x_enable_bits[] = { { 0x50, 1, 0x04, 0x04 }, @@ -386,26 +374,7 @@ static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline) pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); udelay(100); - return ata_std_prereset(link, deadline); -} - -/** - * hpt374_error_handler - reset the hpt374 - * @classes: - * - * The 374 cable detect is a little different due to the extra - * channels. The function 0 channels work like usual but function 1 - * is special - */ - -static void hpt374_error_handler(struct ata_port *ap) -{ - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - - if (!(PCI_FUNC(pdev->devfn) & 1)) - hpt37x_error_handler(ap); - else - ata_bmdma_drive_eh(ap, hpt374_pre_reset, ata_std_softreset, NULL, ata_std_postreset); + return ata_sff_prereset(link, deadline); } /** @@ -619,21 +588,7 @@ static void hpt37x_bmdma_stop(struct ata_queued_cmd *qc) static struct scsi_host_template hpt37x_sht = { - .module = THIS_MODULE, - .name = DRV_NAME, - .ioctl = ata_scsi_ioctl, - .queuecommand = ata_scsi_queuecmd, - .can_queue = ATA_DEF_QUEUE, - .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = LIBATA_MAX_PRD, - .cmd_per_lun = ATA_SHT_CMD_PER_LUN, - .emulated = ATA_SHT_EMULATED, - .use_clustering = ATA_SHT_USE_CLUSTERING, - .proc_name = DRV_NAME, - .dma_boundary = ATA_DMA_BOUNDARY, - .slave_configure = ata_scsi_slave_config, - .slave_destroy = ata_scsi_slave_destroy, - .bios_param = ata_std_bios_param, + ATA_BMDMA_SHT(DRV_NAME), }; /* @@ -641,36 +596,15 @@ static struct scsi_host_template hpt37x_sht = { */ static struct ata_port_operations hpt370_port_ops = { - .set_piomode = hpt370_set_piomode, - .set_dmamode = hpt370_set_dmamode, - .mode_filter = hpt370_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, + .inherits = &ata_bmdma_port_ops, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = hpt37x_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .bmdma_setup = ata_bmdma_setup, .bmdma_start = hpt370_bmdma_start, .bmdma_stop = hpt370_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - .port_start = ata_sff_port_start, + .mode_filter = hpt370_filter, + .set_piomode = hpt370_set_piomode, + .set_dmamode = hpt370_set_dmamode, + .prereset = hpt37x_pre_reset, }; /* @@ -678,36 +612,8 @@ static struct ata_port_operations hpt370_port_ops = { */ static struct ata_port_operations hpt370a_port_ops = { - .set_piomode = hpt370_set_piomode, - .set_dmamode = hpt370_set_dmamode, + .inherits = &hpt370_port_ops, .mode_filter = hpt370a_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = hpt37x_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = hpt370_bmdma_start, - .bmdma_stop = hpt370_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - - .port_start = ata_sff_port_start, }; /* @@ -716,74 +622,23 @@ static struct ata_port_operations hpt370a_port_ops = { */ static struct ata_port_operations hpt372_port_ops = { - .set_piomode = hpt372_set_piomode, - .set_dmamode = hpt372_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, + .inherits = &ata_bmdma_port_ops, - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = hpt37x_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, .bmdma_stop = hpt37x_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - .port_start = ata_sff_port_start, + .set_piomode = hpt372_set_piomode, + .set_dmamode = hpt372_set_dmamode, + .prereset = hpt37x_pre_reset, }; /* * Configuration for HPT374. Mode setting works like 372 and friends - * but we have a different cable detection procedure. + * but we have a different cable detection procedure for function 1. */ -static struct ata_port_operations hpt374_port_ops = { - .set_piomode = hpt372_set_piomode, - .set_dmamode = hpt372_set_dmamode, - .mode_filter = ata_pci_default_filter, - - .tf_load = ata_tf_load, - .tf_read = ata_tf_read, - .check_status = ata_check_status, - .exec_command = ata_exec_command, - .dev_select = ata_std_dev_select, - - .freeze = ata_bmdma_freeze, - .thaw = ata_bmdma_thaw, - .error_handler = hpt374_error_handler, - .post_internal_cmd = ata_bmdma_post_internal_cmd, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = hpt37x_bmdma_stop, - .bmdma_status = ata_bmdma_status, - - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, - - .data_xfer = ata_data_xfer, - - .irq_handler = ata_interrupt, - .irq_clear = ata_bmdma_irq_clear, - .irq_on = ata_irq_on, - - .port_start = ata_sff_port_start, +static struct ata_port_operations hpt374_fn1_port_ops = { + .inherits = &hpt372_port_ops, + .prereset = hpt374_fn1_pre_reset, }; /** @@ -897,7 +752,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) { /* HPT370 - UDMA100 */ static const struct ata_port_info info_hpt370 = { - .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -906,7 +760,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; /* HPT370A - UDMA100 */ static const struct ata_port_info info_hpt370a = { - .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -915,7 +768,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; /* HPT370 - UDMA100 */ static const struct ata_port_info info_hpt370_33 = { - .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -924,7 +776,6 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; /* HPT370A - UDMA100 */ static const struct ata_port_info info_hpt370a_33 = { - .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, @@ -933,28 +784,31 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) }; /* HPT371, 372 and friends - UDMA133 */ static const struct ata_port_info info_hpt372 = { - .sht = &hpt37x_sht, .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = ATA_UDMA6, .port_ops = &hpt372_port_ops }; - /* HPT374 - UDMA100 */ - static const struct ata_port_info info_hpt374 = { - .sht = &hpt37x_sht, + /* HPT374 - UDMA100, function 1 uses different prereset method */ + static const struct ata_port_info info_hpt374_fn0 = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = ATA_UDMA5, - .port_ops = &hpt374_port_ops + .port_ops = &hpt372_port_ops + }; + static const struct ata_port_info info_hpt374_fn1 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA5, + .port_ops = &hpt374_fn1_port_ops }; static const int MHz[4] = { 33, 40, 50, 66 }; - const struct ata_port_info *port; void *private_data = NULL; - struct ata_port_info port_info; - const struct ata_port_info *ppi[] = { &port_info, NULL }; + const struct ata_port_info *ppi[] = { NULL, NULL }; u8 irqmask; u32 class_rev; @@ -966,6 +820,11 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) const struct hpt_chip *chip_table; int clock_slot; + int rc; + + rc = pcim_enable_device(dev); + if (rc) + return rc; pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); class_rev &= 0xFF; @@ -981,17 +840,17 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) switch(class_rev) { case 3: - port = &info_hpt370; + ppi[0] = &info_hpt370; chip_table = &hpt370; prefer_dpll = 0; break; case 4: - port = &info_hpt370a; + ppi[0] = &info_hpt370a; chip_table = &hpt370a; prefer_dpll = 0; break; case 5: - port = &info_hpt372; + ppi[0] = &info_hpt372; chip_table = &hpt372; break; default: @@ -1004,21 +863,21 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* 372N if rev >= 2*/ if (class_rev >= 2) return -ENODEV; - port = &info_hpt372; + ppi[0] = &info_hpt372; chip_table = &hpt372a; break; case PCI_DEVICE_ID_TTI_HPT302: /* 302N if rev > 1 */ if (class_rev > 1) return -ENODEV; - port = &info_hpt372; + ppi[0] = &info_hpt372; /* Check this */ chip_table = &hpt302; break; case PCI_DEVICE_ID_TTI_HPT371: if (class_rev > 1) return -ENODEV; - port = &info_hpt372; + ppi[0] = &info_hpt372; chip_table = &hpt371; /* Single channel device, master is not present but the BIOS (or us for non x86) must mark it @@ -1029,7 +888,10 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) break; case PCI_DEVICE_ID_TTI_HPT374: chip_table = &hpt374; - port = &info_hpt374; + if (!(PCI_FUNC(dev->devfn) & 1)) + *ppi = &info_hpt374_fn0; + else + *ppi = &info_hpt374_fn1; break; default: printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device); @@ -1108,7 +970,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) int dpll, adjust; /* Compute DPLL */ - dpll = (port->udma_mask & 0xC0) ? 3 : 2; + dpll = (ppi[0]->udma_mask & 0xC0) ? 3 : 2; f_low = (MHz[clock_slot] * 48) / MHz[dpll]; f_high = f_low + 2; @@ -1148,19 +1010,16 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) * about lack of UDMA133 support on lower clocks */ - if (clock_slot < 2 && port == &info_hpt370) - port = &info_hpt370_33; - if (clock_slot < 2 && port == &info_hpt370a) - port = &info_hpt370a_33; + if (clock_slot < 2 && ppi[0] == &info_hpt370) + ppi[0] = &info_hpt370_33; + if (clock_slot < 2 && ppi[0] == &info_hpt370a) + ppi[0] = &info_hpt370a_33; printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n", chip_table->name, MHz[clock_slot]); } /* Now kick off ATA set up */ - port_info = *port; - port_info.private_data = private_data; - - return ata_pci_init_one(dev, ppi); + return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data); } static const struct pci_device_id hpt37x[] = { |