diff options
Diffstat (limited to 'drivers/ata/libata-scsi.c')
| -rw-r--r-- | drivers/ata/libata-scsi.c | 58 |
1 files changed, 26 insertions, 32 deletions
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 1660f46dc08b..50f5d697297a 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -855,18 +855,14 @@ static void ata_to_sense_error(u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc, {0xFF, 0xFF, 0xFF, 0xFF}, // END mark }; static const unsigned char stat_table[][4] = { - /* Must be first because BUSY means no other bits valid */ - {0x80, ABORTED_COMMAND, 0x47, 0x00}, - // Busy, fake parity for now - {0x40, ILLEGAL_REQUEST, 0x21, 0x04}, - // Device ready, unaligned write command - {0x20, HARDWARE_ERROR, 0x44, 0x00}, - // Device fault, internal target failure - {0x08, ABORTED_COMMAND, 0x47, 0x00}, - // Timed out in xfer, fake parity for now - {0x04, RECOVERED_ERROR, 0x11, 0x00}, - // Recovered ECC error Medium error, recovered - {0xFF, 0xFF, 0xFF, 0xFF}, // END mark + /* Busy: must be first because BUSY means no other bits valid */ + { ATA_BUSY, ABORTED_COMMAND, 0x00, 0x00 }, + /* Device fault: INTERNAL TARGET FAILURE */ + { ATA_DF, HARDWARE_ERROR, 0x44, 0x00 }, + /* Corrected data error */ + { ATA_CORR, RECOVERED_ERROR, 0x00, 0x00 }, + + { 0xFF, 0xFF, 0xFF, 0xFF }, /* END mark */ }; /* @@ -938,6 +934,8 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc) if (!(qc->flags & ATA_QCFLAG_RTF_FILLED)) { ata_dev_dbg(dev, "missing result TF: can't generate ATA PT sense data\n"); + if (qc->err_mask) + ata_scsi_set_sense(dev, cmd, ABORTED_COMMAND, 0, 0); return; } @@ -995,8 +993,8 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc) if (!(qc->flags & ATA_QCFLAG_RTF_FILLED)) { ata_dev_dbg(dev, - "missing result TF: can't generate sense data\n"); - return; + "Missing result TF: reporting aborted command\n"); + goto aborted; } /* Use ata_to_sense_error() to map status register bits @@ -1007,19 +1005,20 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc) ata_to_sense_error(tf->status, tf->error, &sense_key, &asc, &ascq); ata_scsi_set_sense(dev, cmd, sense_key, asc, ascq); - } else { - /* Could not decode error */ - ata_dev_warn(dev, "could not decode error status 0x%x err_mask 0x%x\n", - tf->status, qc->err_mask); - ata_scsi_set_sense(dev, cmd, ABORTED_COMMAND, 0, 0); - return; - } - block = ata_tf_read_block(&qc->result_tf, dev); - if (block == U64_MAX) + block = ata_tf_read_block(&qc->result_tf, dev); + if (block != U64_MAX) + scsi_set_sense_information(sb, SCSI_SENSE_BUFFERSIZE, + block); return; + } - scsi_set_sense_information(sb, SCSI_SENSE_BUFFERSIZE, block); + /* Could not decode error */ + ata_dev_warn(dev, + "Could not decode error 0x%x, status 0x%x (err_mask=0x%x)\n", + tf->error, tf->status, qc->err_mask); +aborted: + ata_scsi_set_sense(dev, cmd, ABORTED_COMMAND, 0, 0); } void ata_scsi_sdev_config(struct scsi_device *sdev) @@ -3756,21 +3755,16 @@ static int ata_mselect_control_ata_feature(struct ata_queued_cmd *qc, /* Check cdl_ctrl */ switch (buf[0] & 0x03) { case 0: - /* Disable CDL if it is enabled */ - if (!(dev->flags & ATA_DFLAG_CDL_ENABLED)) - return 0; + /* Disable CDL */ ata_dev_dbg(dev, "Disabling CDL\n"); cdl_action = 0; dev->flags &= ~ATA_DFLAG_CDL_ENABLED; break; case 0x02: /* - * Enable CDL if not already enabled. Since this is mutually - * exclusive with NCQ priority, allow this only if NCQ priority - * is disabled. + * Enable CDL. Since CDL is mutually exclusive with NCQ + * priority, allow this only if NCQ priority is disabled. */ - if (dev->flags & ATA_DFLAG_CDL_ENABLED) - return 0; if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLED) { ata_dev_err(dev, "NCQ priority must be disabled to enable CDL\n"); |