1 files changed, 574 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/utstring.c b/drivers/acpi/acpica/utstring.c
new file mode 100644
index 000000000000..b3e36a81aa4d
--- /dev/null
+++ b/drivers/acpi/acpica/utstring.c
@@ -0,0 +1,574 @@
+/*******************************************************************************
+ *
+ * Module Name: utstring - Common functions for strings and characters
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2013, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+
+#define _COMPONENT          ACPI_UTILITIES
+ACPI_MODULE_NAME("utstring")
+
+/*
+ * Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit
+ * version of strtoul.
+ */
+#ifdef ACPI_ASL_COMPILER
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strlwr (strlwr)
+ *
+ * PARAMETERS:  src_string      - The source string to convert
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Convert string to lowercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+void acpi_ut_strlwr(char *src_string)
+{
+	char *string;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!src_string) {
+		return;
+	}
+
+	/* Walk entire string, lowercasing the letters */
+
+	for (string = src_string; *string; string++) {
+		*string = (char)ACPI_TOLOWER(*string);
+	}
+
+	return;
+}
+
+/******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_stricmp (stricmp)
+ *
+ * PARAMETERS:  string1             - first string to compare
+ *              string2             - second string to compare
+ *
+ * RETURN:      int that signifies string relationship. Zero means strings
+ *              are equal.
+ *
+ * DESCRIPTION: Implementation of the non-ANSI stricmp function (compare
+ *              strings with no case sensitivity)
+ *
+ ******************************************************************************/
+
+int acpi_ut_stricmp(char *string1, char *string2)
+{
+	int c1;
+	int c2;
+
+	do {
+		c1 = tolower((int)*string1);
+		c2 = tolower((int)*string2);
+
+		string1++;
+		string2++;
+	}
+	while ((c1 == c2) && (c1));
+
+	return (c1 - c2);
+}
+#endif
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strupr (strupr)
+ *
+ * PARAMETERS:  src_string      - The source string to convert
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Convert string to uppercase
+ *
+ * NOTE: This is not a POSIX function, so it appears here, not in utclib.c
+ *
+ ******************************************************************************/
+
+void acpi_ut_strupr(char *src_string)
+{
+	char *string;
+
+	ACPI_FUNCTION_ENTRY();
+
+	if (!src_string) {
+		return;
+	}
+
+	/* Walk entire string, uppercasing the letters */
+
+	for (string = src_string; *string; string++) {
+		*string = (char)ACPI_TOUPPER(*string);
+	}
+
+	return;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_strtoul64
+ *
+ * PARAMETERS:  string          - Null terminated string
+ *              base            - Radix of the string: 16 or ACPI_ANY_BASE;
+ *                                ACPI_ANY_BASE means 'in behalf of to_integer'
+ *              ret_integer     - Where the converted integer is returned
+ *
+ * RETURN:      Status and Converted value
+ *
+ * DESCRIPTION: Convert a string into an unsigned value. Performs either a
+ *              32-bit or 64-bit conversion, depending on the current mode
+ *              of the interpreter.
+ *              NOTE: Does not support Octal strings, not needed.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 *ret_integer)
+{
+	u32 this_digit = 0;
+	u64 return_value = 0;
+	u64 quotient;
+	u64 dividend;
+	u32 to_integer_op = (base == ACPI_ANY_BASE);
+	u32 mode32 = (acpi_gbl_integer_byte_width == 4);
+	u8 valid_digits = 0;
+	u8 sign_of0x = 0;
+	u8 term = 0;
+
+	ACPI_FUNCTION_TRACE_STR(ut_stroul64, string);
+
+	switch (base) {
+	case ACPI_ANY_BASE:
+	case 16:
+		break;
+
+	default:
+		/* Invalid Base */
+		return_ACPI_STATUS(AE_BAD_PARAMETER);
+	}
+
+	if (!string) {
+		goto error_exit;
+	}
+
+	/* Skip over any white space in the buffer */
+
+	while ((*string) && (ACPI_IS_SPACE(*string) || *string == '\t')) {
+		string++;
+	}
+
+	if (to_integer_op) {
+		/*
+		 * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
+		 * We need to determine if it is decimal or hexadecimal.
+		 */
+		if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
+			sign_of0x = 1;
+			base = 16;
+
+			/* Skip over the leading '0x' */
+			string += 2;
+		} else {
+			base = 10;
+		}
+	}
+
+	/* Any string left? Check that '0x' is not followed by white space. */
+
+	if (!(*string) || ACPI_IS_SPACE(*string) || *string == '\t') {
+		if (to_integer_op) {
+			goto error_exit;
+		} else {
+			goto all_done;
+		}
+	}
+
+	/*
+	 * Perform a 32-bit or 64-bit conversion, depending upon the current
+	 * execution mode of the interpreter
+	 */
+	dividend = (mode32) ? ACPI_UINT32_MAX : ACPI_UINT64_MAX;
+
+	/* Main loop: convert the string to a 32- or 64-bit integer */
+
+	while (*string) {
+		if (ACPI_IS_DIGIT(*string)) {
+
+			/* Convert ASCII 0-9 to Decimal value */
+
+			this_digit = ((u8)*string) - '0';
+		} else if (base == 10) {
+
+			/* Digit is out of range; possible in to_integer case only */
+
+			term = 1;
+		} else {
+			this_digit = (u8)ACPI_TOUPPER(*string);
+			if (ACPI_IS_XDIGIT((char)this_digit)) {
+
+				/* Convert ASCII Hex char to value */
+
+				this_digit = this_digit - 'A' + 10;
+			} else {
+				term = 1;
+			}
+		}
+
+		if (term) {
+			if (to_integer_op) {
+				goto error_exit;
+			} else {
+				break;
+			}
+		} else if ((valid_digits == 0) && (this_digit == 0)
+			   && !sign_of0x) {
+
+			/* Skip zeros */
+			string++;
+			continue;
+		}
+
+		valid_digits++;
+
+		if (sign_of0x
+		    && ((valid_digits > 16)
+			|| ((valid_digits > 8) && mode32))) {
+			/*
+			 * This is to_integer operation case.
+			 * No any restrictions for string-to-integer conversion,
+			 * see ACPI spec.
+			 */
+			goto error_exit;
+		}
+
+		/* Divide the digit into the correct position */
+
+		(void)acpi_ut_short_divide((dividend - (u64)this_digit),
+					   base, &quotient, NULL);
+
+		if (return_value > quotient) {
+			if (to_integer_op) {
+				goto error_exit;
+			} else {
+				break;
+			}
+		}
+
+		return_value *= base;
+		return_value += this_digit;
+		string++;
+	}
+
+	/* All done, normal exit */
+
+      all_done:
+
+	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
+			  ACPI_FORMAT_UINT64(return_value)));
+
+	*ret_integer = return_value;
+	return_ACPI_STATUS(AE_OK);
+
+      error_exit:
+	/* Base was set/validated above */
+
+	if (base == 10) {
+		return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
+	} else {
+		return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
+	}
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_print_string
+ *
+ * PARAMETERS:  string          - Null terminated ASCII string
+ *              max_length      - Maximum output length
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Dump an ASCII string with support for ACPI-defined escape
+ *              sequences.
+ *
+ ******************************************************************************/
+
+void acpi_ut_print_string(char *string, u8 max_length)
+{
+	u32 i;
+
+	if (!string) {
+		acpi_os_printf("<\"NULL STRING PTR\">");
+		return;
+	}
+
+	acpi_os_printf("\"");
+	for (i = 0; string[i] && (i < max_length); i++) {
+
+		/* Escape sequences */
+
+		switch (string[i]) {
+		case 0x07:
+			acpi_os_printf("\\a");	/* BELL */
+			break;
+
+		case 0x08:
+			acpi_os_printf("\\b");	/* BACKSPACE */
+			break;
+
+		case 0x0C:
+			acpi_os_printf("\\f");	/* FORMFEED */
+			break;
+
+		case 0x0A:
+			acpi_os_printf("\\n");	/* LINEFEED */
+			break;
+
+		case 0x0D:
+			acpi_os_printf("\\r");	/* CARRIAGE RETURN */
+			break;
+
+		case 0x09:
+			acpi_os_printf("\\t");	/* HORIZONTAL TAB */
+			break;
+
+		case 0x0B:
+			acpi_os_printf("\\v");	/* VERTICAL TAB */
+			break;
+
+		case '\'':	/* Single Quote */
+		case '\"':	/* Double Quote */
+		case '\\':	/* Backslash */
+			acpi_os_printf("\\%c", (int)string[i]);
+			break;
+
+		default:
+
+			/* Check for printable character or hex escape */
+
+			if (ACPI_IS_PRINT(string[i])) {
+				/* This is a normal character */
+
+				acpi_os_printf("%c", (int)string[i]);
+			} else {
+				/* All others will be Hex escapes */
+
+				acpi_os_printf("\\x%2.2X", (s32) string[i]);
+			}
+			break;
+		}
+	}
+	acpi_os_printf("\"");
+
+	if (i == max_length && string[i]) {
+		acpi_os_printf("...");
+	}
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_valid_acpi_char
+ *
+ * PARAMETERS:  char            - The character to be examined
+ *              position        - Byte position (0-3)
+ *
+ * RETURN:      TRUE if the character is valid, FALSE otherwise
+ *
+ * DESCRIPTION: Check for a valid ACPI character. Must be one of:
+ *              1) Upper case alpha
+ *              2) numeric
+ *              3) underscore
+ *
+ *              We allow a '!' as the last character because of the ASF! table
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_valid_acpi_char(char character, u32 position)
+{
+
+	if (!((character >= 'A' && character <= 'Z') ||
+	      (character >= '0' && character <= '9') || (character == '_'))) {
+
+		/* Allow a '!' in the last position */
+
+		if (character == '!' && position == 3) {
+			return (TRUE);
+		}
+
+		return (FALSE);
+	}
+
+	return (TRUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_valid_acpi_name
+ *
+ * PARAMETERS:  name            - The name to be examined
+ *
+ * RETURN:      TRUE if the name is valid, FALSE otherwise
+ *
+ * DESCRIPTION: Check for a valid ACPI name. Each character must be one of:
+ *              1) Upper case alpha
+ *              2) numeric
+ *              3) underscore
+ *
+ ******************************************************************************/
+
+u8 acpi_ut_valid_acpi_name(u32 name)
+{
+	u32 i;
+
+	ACPI_FUNCTION_ENTRY();
+
+	for (i = 0; i < ACPI_NAME_SIZE; i++) {
+		if (!acpi_ut_valid_acpi_char
+		    ((ACPI_CAST_PTR(char, &name))[i], i)) {
+			return (FALSE);
+		}
+	}
+
+	return (TRUE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION:    acpi_ut_repair_name
+ *
+ * PARAMETERS:  name            - The ACPI name to be repaired
+ *
+ * RETURN:      Repaired version of the name
+ *
+ * DESCRIPTION: Repair an ACPI name: Change invalid characters to '*' and
+ *              return the new name. NOTE: the Name parameter must reside in
+ *              read/write memory, cannot be a const.
+ *
+ * An ACPI Name must consist of valid ACPI characters. We will repair the name
+ * if necessary because we don't want to abort because of this, but we want
+ * all namespace names to be printable. A warning message is appropriate.
+ *
+ * This issue came up because there are in fact machines that exhibit
+ * this problem, and we want to be able to enable ACPI support for them,
+ * even though there are a few bad names.
+ *
+ ******************************************************************************/
+
+void acpi_ut_repair_name(char *name)
+{
+	u32 i;
+	u8 found_bad_char = FALSE;
+	u32 original_name;
+
+	ACPI_FUNCTION_NAME(ut_repair_name);
+
+	ACPI_MOVE_NAME(&original_name, name);
+
+	/* Check each character in the name */
+
+	for (i = 0; i < ACPI_NAME_SIZE; i++) {
+		if (acpi_ut_valid_acpi_char(name[i], i)) {
+			continue;
+		}
+
+		/*
+		 * Replace a bad character with something printable, yet technically
+		 * still invalid. This prevents any collisions with existing "good"
+		 * names in the namespace.
+		 */
+		name[i] = '*';
+		found_bad_char = TRUE;
+	}
+
+	if (found_bad_char) {
+
+		/* Report warning only if in strict mode or debug mode */
+
+		if (!acpi_gbl_enable_interpreter_slack) {
+			ACPI_WARNING((AE_INFO,
+				      "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",
+				      original_name, name));
+		} else {
+			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+					  "Invalid character(s) in name (0x%.8X), repaired: [%4.4s]",
+					  original_name, name));
+		}
+	}
+}
+
+#if defined ACPI_ASL_COMPILER || defined ACPI_EXEC_APP
+/*******************************************************************************
+ *
+ * FUNCTION:    ut_convert_backslashes
+ *
+ * PARAMETERS:  pathname        - File pathname string to be converted
+ *
+ * RETURN:      Modifies the input Pathname
+ *
+ * DESCRIPTION: Convert all backslashes (0x5C) to forward slashes (0x2F) within
+ *              the entire input file pathname string.
+ *
+ ******************************************************************************/
+
+void ut_convert_backslashes(char *pathname)
+{
+
+	if (!pathname) {
+		return;
+	}
+
+	while (*pathname) {
+		if (*pathname == '\\') {
+			*pathname = '/';
+		}
+
+		pathname++;
+	}
+}
+#endif