diff options
Diffstat (limited to 'arch')
43 files changed, 189 insertions, 195 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 235ad559acb2..e41eca79c950 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -806,6 +806,7 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ logicpd-som-lv-37xx-devkit.dtb \ omap3430-sdp.dtb \ omap3-beagle.dtb \ + omap3-beagle-ab4.dtb \ omap3-beagle-xm.dtb \ omap3-beagle-xm-ab.dtb \ omap3-cm-t3517.dtb \ diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 673159d93a6a..f957fea8208e 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -55,7 +55,7 @@ 2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */ >; tx-num-evt = <16>; - rt-num-evt = <16>; + rx-num-evt = <16>; status = "okay"; }; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 6b485cbed8d5..42bff117656c 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -160,7 +160,7 @@ target-module@48210000 { compatible = "ti,sysc-omap4-simple", "ti,sysc"; power-domains = <&prm_mpu>; - clocks = <&mpu_clkctrl DRA7_MPU_CLKCTRL 0>; + clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; @@ -875,10 +875,10 @@ <0x58000014 4>; reg-names = "rev", "syss"; ti,syss-mask = <1>; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 0>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 11>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>; clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk"; #address-cells = <1>; #size-cells = <1>; @@ -912,7 +912,7 @@ SYSC_OMAP2_SOFTRESET | SYSC_OMAP2_AUTOIDLE)>; ti,syss-mask = <1>; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; @@ -939,8 +939,8 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>; - clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>, - <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>; + clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>, + <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>; clock-names = "fck", "dss_clk"; #address-cells = <1>; #size-cells = <1>; @@ -979,7 +979,7 @@ compatible = "vivante,gc"; reg = <0x0 0x700>; interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>; + clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>; clock-names = "core"; }; }; @@ -1333,7 +1333,7 @@ ti,no-reset-on-init; ti,no-idle; timer@0 { - assigned-clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>; + assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>; assigned-clock-parents = <&sys_32k_ck>; }; }; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 8cbaf1c81174..3b609d987d88 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -79,7 +79,6 @@ MX23_PAD_LCD_RESET__GPIO_1_18 MX23_PAD_PWM3__GPIO_1_29 MX23_PAD_PWM4__GPIO_1_30 - MX23_PAD_SSP1_DETECT__SSP1_DETECT >; fsl,drive-strength = <MXS_DRIVE_4mA>; fsl,voltage = <MXS_VOLTAGE_HIGH>; diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi index d07d8f83456d..ccfa8e320be6 100644 --- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi +++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi @@ -5,6 +5,8 @@ * Author: Fabio Estevam <fabio.estevam@freescale.com> */ +#include <dt-bindings/gpio/gpio.h> + / { aliases { backlight = &backlight; @@ -226,6 +228,7 @@ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 >; }; @@ -304,7 +307,7 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - non-removable; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7ulp.dtsi b/arch/arm/boot/dts/imx7ulp.dtsi index b7ea37ad4e55..bcec98b96411 100644 --- a/arch/arm/boot/dts/imx7ulp.dtsi +++ b/arch/arm/boot/dts/imx7ulp.dtsi @@ -259,7 +259,7 @@ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&pcc2 IMX7ULP_CLK_WDG1>; assigned-clocks = <&pcc2 IMX7ULP_CLK_WDG1>; - assigned-clocks-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_FIRC_BUS_CLK>; timeout-sec = <40>; }; diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 3be7cba603d5..26eaba3fa96f 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -59,7 +59,7 @@ }; uart_A: serial@84c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84c0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; fifo-size = <128>; @@ -67,7 +67,7 @@ }; uart_B: serial@84dc { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84dc 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -105,7 +105,7 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x8700 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -228,7 +228,7 @@ }; uart_AO: serial@4c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart"; reg = <0x4c0 0x18>; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; status = "disabled"; diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index f80ddc98d3a2..9997a5d0333a 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -736,27 +736,27 @@ }; &uart_AO { - compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "baud", "xtal", "pclk"; + compatible = "amlogic,meson8-uart", "amlogic,meson-ao-uart"; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; }; &uart_A { - compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>; - clock-names = "baud", "xtal", "pclk"; + compatible = "amlogic,meson8-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; }; &uart_B { - compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>; - clock-names = "baud", "xtal", "pclk"; + compatible = "amlogic,meson8-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; }; &uart_C { - compatible = "amlogic,meson8-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>; - clock-names = "baud", "xtal", "pclk"; + compatible = "amlogic,meson8-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; }; &usb0 { diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index b49b7cbaed4e..94f1c03decce 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -724,27 +724,27 @@ }; &uart_AO { - compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_CLK81>; - clock-names = "baud", "xtal", "pclk"; + compatible = "amlogic,meson8b-uart", "amlogic,meson-ao-uart"; + clocks = <&xtal>, <&clkc CLKID_CLK81>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; }; &uart_A { - compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART0>; - clock-names = "baud", "xtal", "pclk"; + compatible = "amlogic,meson8b-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; }; &uart_B { - compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART1>; - clock-names = "baud", "xtal", "pclk"; + compatible = "amlogic,meson8b-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; }; &uart_C { - compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; - clocks = <&clkc CLKID_CLK81>, <&xtal>, <&clkc CLKID_UART2>; - clock-names = "baud", "xtal", "pclk"; + compatible = "amlogic,meson8b-uart"; + clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk", "baud"; }; &usb0 { diff --git a/arch/arm/boot/dts/omap3-beagle-ab4.dts b/arch/arm/boot/dts/omap3-beagle-ab4.dts new file mode 100644 index 000000000000..990ff2d84686 --- /dev/null +++ b/arch/arm/boot/dts/omap3-beagle-ab4.dts @@ -0,0 +1,47 @@ +// SPDX-License-Identifier: GPL-2.0-only +/dts-v1/; + +#include "omap3-beagle.dts" + +/ { + model = "TI OMAP3 BeagleBoard A to B4"; + compatible = "ti,omap3-beagle-ab4", "ti,omap3-beagle", "ti,omap3430", "ti,omap3"; +}; + +/* + * Workaround for capacitor C70 issue, see "Boards revision A and < B5" + * section at https://elinux.org/BeagleBoard_Community + */ + +/* Unusable as clocksource because of unreliable oscillator */ +&counter32k { + status = "disabled"; +}; + +/* Unusable as clockevent because of unreliable oscillator, allow to idle */ +&timer1_target { + /delete-property/ti,no-reset-on-init; + /delete-property/ti,no-idle; + timer@0 { + /delete-property/ti,timer-alwon; + }; +}; + +/* Preferred always-on timer for clocksource */ +&timer12_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + /* Always clocked by secure_32k_fck */ + }; +}; + +/* Preferred timer for clockevent */ +&timer2_target { + ti,no-reset-on-init; + ti,no-idle; + timer@0 { + assigned-clocks = <&gpt2_fck>; + assigned-clock-parents = <&sys_ck>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index f9f34b8458e9..0548b391334f 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -304,39 +304,6 @@ phys = <0 &hsusb2_phy>; }; -/* Unusable as clocksource because of unreliable oscillator */ -&counter32k { - status = "disabled"; -}; - -/* Unusable as clockevent because if unreliable oscillator, allow to idle */ -&timer1_target { - /delete-property/ti,no-reset-on-init; - /delete-property/ti,no-idle; - timer@0 { - /delete-property/ti,timer-alwon; - }; -}; - -/* Preferred always-on timer for clocksource */ -&timer12_target { - ti,no-reset-on-init; - ti,no-idle; - timer@0 { - /* Always clocked by secure_32k_fck */ - }; -}; - -/* Preferred timer for clockevent */ -&timer2_target { - ti,no-reset-on-init; - ti,no-idle; - timer@0 { - assigned-clocks = <&gpt2_fck>; - assigned-clock-parents = <&sys_ck>; - }; -}; - &twl_gpio { ti,use-leds; /* pullups: BIT(1) */ diff --git a/arch/arm/boot/dts/spear320-hmi.dts b/arch/arm/boot/dts/spear320-hmi.dts index 367ba48aac3e..b587e4ec11e5 100644 --- a/arch/arm/boot/dts/spear320-hmi.dts +++ b/arch/arm/boot/dts/spear320-hmi.dts @@ -235,7 +235,6 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x41>; - irq-over-gpio; irq-gpios = <&gpiopinctrl 29 0x4>; id = <0>; blocks = <0x5>; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 580ca497f312..f8c5899fbdba 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -185,10 +185,6 @@ cap-sd-highspeed; cap-mmc-highspeed; /* All direction control is used */ - st,sig-dir-cmd; - st,sig-dir-dat0; - st,sig-dir-dat2; - st,sig-dir-dat31; st,sig-pin-fbclk; full-pwr-cycle; vmmc-supply = <&ab8500_ldo_aux3_reg>; diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 6daaa645ae5d..21413a9b7b6c 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -263,9 +263,9 @@ static int __init omapdss_init_of(void) } r = of_platform_populate(node, NULL, NULL, &pdev->dev); + put_device(&pdev->dev); if (r) { pr_err("Unable to populate DSS submodule devices\n"); - put_device(&pdev->dev); return r; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index ccb0e3732c0d..31d1a21f6041 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -752,8 +752,10 @@ static int __init _init_clkctrl_providers(void) for_each_matching_node(np, ti_clkctrl_match_table) { ret = _setup_clkctrl_provider(np); - if (ret) + if (ret) { + of_node_put(np); break; + } } return ret; diff --git a/arch/arm/mach-socfpga/Kconfig b/arch/arm/mach-socfpga/Kconfig index 43ddec677c0b..594edf9bbea4 100644 --- a/arch/arm/mach-socfpga/Kconfig +++ b/arch/arm/mach-socfpga/Kconfig @@ -2,6 +2,7 @@ menuconfig ARCH_INTEL_SOCFPGA bool "Altera SOCFPGA family" depends on ARCH_MULTI_V7 + select ARCH_HAS_RESET_CONTROLLER select ARCH_SUPPORTS_BIG_ENDIAN select ARM_AMBA select ARM_GIC @@ -18,6 +19,7 @@ menuconfig ARCH_INTEL_SOCFPGA select PL310_ERRATA_727915 select PL310_ERRATA_753970 if PL310 select PL310_ERRATA_769419 + select RESET_CONTROLLER if ARCH_INTEL_SOCFPGA config SOCFPGA_SUSPEND diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index cbcd42decb2a..09b885cc4db5 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -672,6 +672,7 @@ config ARM64_WORKAROUND_TRBE_OVERWRITE_FILL_MODE config ARM64_ERRATUM_2051678 bool "Cortex-A510: 2051678: disable Hardware Update of the page table dirty bit" + default y help This options adds the workaround for ARM Cortex-A510 erratum ARM64_ERRATUM_2051678. Affected Coretex-A510 might not respect the ordering rules for diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 7d5d58800170..21697449d762 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -309,9 +309,6 @@ config ARCH_VISCONTI help This enables support for Toshiba Visconti SoCs Family. -config ARCH_VULCAN - def_bool n - config ARCH_XGENE bool "AppliedMicro X-Gene SOC Family" help diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 517519e6e87f..f84d4b489e0b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -107,6 +107,12 @@ no-map; }; + /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ + secmon_reserved_bl32: secmon@5300000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index d8838dde0f0f..4fb31c2ba31c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -157,14 +157,6 @@ regulator-always-on; }; - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi index 3e968b244191..fd3fa82e4c33 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi @@ -17,7 +17,7 @@ rtc1 = &vrtc; }; - dioo2133: audio-amplifier-0 { + dio2133: audio-amplifier-0 { compatible = "simple-audio-amplifier"; enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>; VCC-supply = <&vcc_5v>; @@ -219,7 +219,7 @@ audio-widgets = "Line", "Lineout"; audio-aux-devs = <&tdmout_b>, <&tdmout_c>, <&tdmin_a>, <&tdmin_b>, <&tdmin_c>, <&tdmin_lb>, - <&dioo2133>; + <&dio2133>; audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1", "TDMOUT_B IN 1", "FRDDR_B OUT 1", "TDMOUT_B IN 2", "FRDDR_C OUT 1", diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 6b457b2c30a4..aa14ea017a61 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -49,6 +49,12 @@ no-map; }; + /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ + secmon_reserved_bl32: secmon@5300000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts index 212c6aa5a3b8..5751c48620ed 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts @@ -123,7 +123,7 @@ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; - enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio_ao GPIOE_2 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi index 0bd1e98a0eef..ddb1b345397f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi @@ -48,7 +48,7 @@ regulator-max-microvolt = <3300000>; vin-supply = <&vcc_5v>; - enable-gpio = <&gpio GPIOE_2 GPIO_ACTIVE_HIGH>; + enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>; enable-active-high; regulator-always-on; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 427475846fc7..a5d79f2f7c19 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -203,14 +203,6 @@ regulator-always-on; }; - reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index d74e738e4070..c03f4e183389 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -157,6 +157,10 @@ }; }; +&ftm_alarm0 { + status = "okay"; +}; + &gpio1 { gpio-line-names = "", "", "", "", "", "", "", "", diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index f3e3418f7edc..2d4a472af6a9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -1115,8 +1115,8 @@ status = "okay"; ports { - port@1 { - reg = <1>; + port@0 { + reg = <0>; mipi1_sensor_ep: endpoint { remote-endpoint = <&camera1_ep>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 2df2510d0118..e92ebb6147e6 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -554,7 +554,7 @@ assigned-clock-rates = <0>, <0>, <0>, <594000000>; status = "disabled"; - port@0 { + port { lcdif_mipi_dsi: endpoint { remote-endpoint = <&mipi_dsi_lcdif_in>; }; @@ -1151,8 +1151,8 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; + port@1 { + reg = <1>; csi1_mipi_ep: endpoint { remote-endpoint = <&csi1_ep>; @@ -1203,8 +1203,8 @@ #address-cells = <1>; #size-cells = <0>; - port@0 { - reg = <0>; + port@1 { + reg = <1>; csi2_mipi_ep: endpoint { remote-endpoint = <&csi2_ep>; diff --git a/arch/arm64/boot/dts/freescale/mba8mx.dtsi b/arch/arm64/boot/dts/freescale/mba8mx.dtsi index f27e3c8de916..ce6d5bdba0a8 100644 --- a/arch/arm64/boot/dts/freescale/mba8mx.dtsi +++ b/arch/arm64/boot/dts/freescale/mba8mx.dtsi @@ -91,7 +91,7 @@ sound { compatible = "fsl,imx-audio-tlv320aic32x4"; - model = "tqm-tlv320aic32"; + model = "imx-audio-tlv320aic32x4"; ssi-controller = <&sai3>; audio-codec = <&tlv320aic3x04>; }; diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts index a5a24f9f46c5..b210cc07c539 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts @@ -15,8 +15,18 @@ model = "Texas Instruments J721S2 EVM"; chosen { - stdout-path = "serial10:115200n8"; - bootargs = "console=ttyS10,115200n8 earlycon=ns16550a,mmio32,2880000"; + stdout-path = "serial2:115200n8"; + bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,2880000"; + }; + + aliases { + serial1 = &mcu_uart0; + serial2 = &main_uart8; + mmc0 = &main_sdhci0; + mmc1 = &main_sdhci1; + can0 = &main_mcan16; + can1 = &mcu_mcan0; + can2 = &mcu_mcan1; }; evm_12v0: fixedregulator-evm12v0 { diff --git a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi index 80d3cae03e88..fe5234c40f6c 100644 --- a/arch/arm64/boot/dts/ti/k3-j721s2.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j721s2.dtsi @@ -21,28 +21,6 @@ #address-cells = <2>; #size-cells = <2>; - aliases { - serial0 = &wkup_uart0; - serial1 = &mcu_uart0; - serial2 = &main_uart0; - serial3 = &main_uart1; - serial4 = &main_uart2; - serial5 = &main_uart3; - serial6 = &main_uart4; - serial7 = &main_uart5; - serial8 = &main_uart6; - serial9 = &main_uart7; - serial10 = &main_uart8; - serial11 = &main_uart9; - mmc0 = &main_sdhci0; - mmc1 = &main_sdhci1; - can0 = &main_mcan16; - can1 = &mcu_mcan0; - can2 = &mcu_mcan1; - can3 = &main_mcan3; - can4 = &main_mcan5; - }; - chosen { }; cpus { diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts index 3e336b3dbb10..ab6e3dc0bc1d 100644 --- a/arch/mips/boot/dts/ingenic/ci20.dts +++ b/arch/mips/boot/dts/ingenic/ci20.dts @@ -83,6 +83,8 @@ label = "HDMI OUT"; type = "a"; + ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>; + port { hdmi_con: endpoint { remote-endpoint = <&dw_hdmi_out>; @@ -114,17 +116,6 @@ gpio = <&gpf 14 GPIO_ACTIVE_LOW>; enable-active-high; }; - - hdmi_power: fixedregulator@3 { - compatible = "regulator-fixed"; - - regulator-name = "hdmi_power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpa 25 0>; - enable-active-high; - }; }; &ext { @@ -576,8 +567,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pins_hdmi_ddc>; - hdmi-5v-supply = <&hdmi_power>; - ports { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile index 8a107ed18b0d..7d81102cffd4 100644 --- a/arch/riscv/Makefile +++ b/arch/riscv/Makefile @@ -50,6 +50,12 @@ riscv-march-$(CONFIG_ARCH_RV32I) := rv32ima riscv-march-$(CONFIG_ARCH_RV64I) := rv64ima riscv-march-$(CONFIG_FPU) := $(riscv-march-y)fd riscv-march-$(CONFIG_RISCV_ISA_C) := $(riscv-march-y)c + +# Newer binutils versions default to ISA spec version 20191213 which moves some +# instructions from the I extension to the Zicsr and Zifencei extensions. +toolchain-need-zicsr-zifencei := $(call cc-option-yn, -march=$(riscv-march-y)_zicsr_zifencei) +riscv-march-$(toolchain-need-zicsr-zifencei) := $(riscv-march-y)_zicsr_zifencei + KBUILD_CFLAGS += -march=$(subst fd,,$(riscv-march-y)) KBUILD_AFLAGS += -march=$(riscv-march-y) diff --git a/arch/riscv/kernel/cpu-hotplug.c b/arch/riscv/kernel/cpu-hotplug.c index be7f05b542bb..f7a832e3a1d1 100644 --- a/arch/riscv/kernel/cpu-hotplug.c +++ b/arch/riscv/kernel/cpu-hotplug.c @@ -12,6 +12,7 @@ #include <linux/sched/hotplug.h> #include <asm/irq.h> #include <asm/cpu_ops.h> +#include <asm/numa.h> #include <asm/sbi.h> bool cpu_has_hotplug(unsigned int cpu) @@ -40,6 +41,7 @@ int __cpu_disable(void) return ret; remove_cpu_topology(cpu); + numa_remove_cpu(cpu); set_cpu_online(cpu, false); irq_migrate_all_off_this_cpu(); diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S index 2363b43312fc..ec07f991866a 100644 --- a/arch/riscv/kernel/head.S +++ b/arch/riscv/kernel/head.S @@ -22,14 +22,13 @@ add \reg, \reg, t0 .endm .macro XIP_FIXUP_FLASH_OFFSET reg - la t1, __data_loc - li t0, XIP_OFFSET_MASK - and t1, t1, t0 - li t1, XIP_OFFSET - sub t0, t0, t1 - sub \reg, \reg, t0 + la t0, __data_loc + REG_L t1, _xip_phys_offset + sub \reg, \reg, t1 + add \reg, \reg, t0 .endm _xip_fixup: .dword CONFIG_PHYS_RAM_BASE - CONFIG_XIP_PHYS_ADDR - XIP_OFFSET +_xip_phys_offset: .dword CONFIG_XIP_PHYS_ADDR + XIP_OFFSET #else .macro XIP_FIXUP_OFFSET reg .endm diff --git a/arch/riscv/kernel/stacktrace.c b/arch/riscv/kernel/stacktrace.c index 201ee206fb57..14d2b53ec322 100644 --- a/arch/riscv/kernel/stacktrace.c +++ b/arch/riscv/kernel/stacktrace.c @@ -22,15 +22,16 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs, bool (*fn)(void *, unsigned long), void *arg) { unsigned long fp, sp, pc; + int level = 0; if (regs) { fp = frame_pointer(regs); sp = user_stack_pointer(regs); pc = instruction_pointer(regs); } else if (task == NULL || task == current) { - fp = (unsigned long)__builtin_frame_address(1); - sp = (unsigned long)__builtin_frame_address(0); - pc = (unsigned long)__builtin_return_address(0); + fp = (unsigned long)__builtin_frame_address(0); + sp = sp_in_global; + pc = (unsigned long)walk_stackframe; } else { /* task blocked in __switch_to */ fp = task->thread.s[0]; @@ -42,7 +43,7 @@ void notrace walk_stackframe(struct task_struct *task, struct pt_regs *regs, unsigned long low, high; struct stackframe *frame; - if (unlikely(!__kernel_text_address(pc) || !fn(arg, pc))) + if (unlikely(!__kernel_text_address(pc) || (level++ >= 1 && !fn(arg, pc)))) break; /* Validate frame pointer */ diff --git a/arch/riscv/mm/extable.c b/arch/riscv/mm/extable.c index 05978f78579f..35484d830fd6 100644 --- a/arch/riscv/mm/extable.c +++ b/arch/riscv/mm/extable.c @@ -33,7 +33,7 @@ static inline void regs_set_gpr(struct pt_regs *regs, unsigned int offset, if (unlikely(offset > MAX_REG_OFFSET)) return; - if (!offset) + if (offset) *(unsigned long *)((unsigned long)regs + offset) = val; } @@ -43,8 +43,8 @@ static bool ex_handler_uaccess_err_zero(const struct exception_table_entry *ex, int reg_err = FIELD_GET(EX_DATA_REG_ERR, ex->data); int reg_zero = FIELD_GET(EX_DATA_REG_ZERO, ex->data); - regs_set_gpr(regs, reg_err, -EFAULT); - regs_set_gpr(regs, reg_zero, 0); + regs_set_gpr(regs, reg_err * sizeof(unsigned long), -EFAULT); + regs_set_gpr(regs, reg_zero * sizeof(unsigned long), 0); regs->epc = get_ex_fixup(ex); return true; diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c index cf4d018b7d66..c27294128e18 100644 --- a/arch/riscv/mm/init.c +++ b/arch/riscv/mm/init.c @@ -232,6 +232,7 @@ static pmd_t __maybe_unused early_dtb_pmd[PTRS_PER_PMD] __initdata __aligned(PAG #ifdef CONFIG_XIP_KERNEL #define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&pt_ops)) +#define riscv_pfn_base (*(unsigned long *)XIP_FIXUP(&riscv_pfn_base)) #define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir)) #define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte)) #define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir)) @@ -522,6 +523,7 @@ static uintptr_t __init best_map_size(phys_addr_t base, phys_addr_t size) } #ifdef CONFIG_XIP_KERNEL +#define phys_ram_base (*(phys_addr_t *)XIP_FIXUP(&phys_ram_base)) extern char _xiprom[], _exiprom[], __data_loc; /* called from head.S with MMU off */ diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 577f1ead6a51..2296b1ff1e02 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -4667,6 +4667,8 @@ static long kvm_s390_guest_sida_op(struct kvm_vcpu *vcpu, return -EINVAL; if (mop->size + mop->sida_offset > sida_size(vcpu->arch.sie_block)) return -E2BIG; + if (!kvm_s390_pv_cpu_is_protected(vcpu)) + return -EINVAL; switch (mop->op) { case KVM_S390_MEMOP_SIDA_READ: diff --git a/arch/x86/include/asm/xen/cpuid.h b/arch/x86/include/asm/xen/cpuid.h index a9630104f1c4..78e667a31d6c 100644 --- a/arch/x86/include/asm/xen/cpuid.h +++ b/arch/x86/include/asm/xen/cpuid.h @@ -100,6 +100,13 @@ /* Memory mapped from other domains has valid IOMMU entries */ #define XEN_HVM_CPUID_IOMMU_MAPPINGS (1u << 2) #define XEN_HVM_CPUID_VCPU_ID_PRESENT (1u << 3) /* vcpu id is present in EBX */ +#define XEN_HVM_CPUID_DOMID_PRESENT (1u << 4) /* domid is present in ECX */ +/* + * Bits 55:49 from the IO-APIC RTE and bits 11:5 from the MSI address can be + * used to store high bits for the Destination ID. This expands the Destination + * ID field from 8 to 15 bits, allowing to target APIC IDs up 32768. + */ +#define XEN_HVM_CPUID_EXT_DEST_ID (1u << 5) /* * Leaf 6 (0x40000x05) diff --git a/arch/x86/kernel/resource.c b/arch/x86/kernel/resource.c index 9ae64f9af956..9b9fb7882c20 100644 --- a/arch/x86/kernel/resource.c +++ b/arch/x86/kernel/resource.c @@ -1,5 +1,4 @@ // SPDX-License-Identifier: GPL-2.0 -#include <linux/dmi.h> #include <linux/ioport.h> #include <asm/e820/api.h> @@ -24,31 +23,11 @@ static void resource_clip(struct resource *res, resource_size_t start, res->start = end + 1; } -/* - * Some BIOS-es contain a bug where they add addresses which map to - * system RAM in the PCI host bridge window returned by the ACPI _CRS - * method, see commit 4dc2287c1805 ("x86: avoid E820 regions when - * allocating address space"). To avoid this Linux by default excludes - * E820 reservations when allocating addresses since 2010. - * In 2019 some systems have shown-up with E820 reservations which cover - * the entire _CRS returned PCI host bridge window, causing all attempts - * to assign memory to PCI BARs to fail if Linux uses E820 reservations. - * - * Ideally Linux would fully stop using E820 reservations, but then - * the old systems this was added for will regress. - * Instead keep the old behavior for old systems, while ignoring the - * E820 reservations for any systems from now on. - */ static void remove_e820_regions(struct resource *avail) { - int i, year = dmi_get_bios_year(); + int i; struct e820_entry *entry; - if (year >= 2018) - return; - - pr_info_once("PCI: Removing E820 reservations from host bridge windows\n"); - for (i = 0; i < e820_table->nr_entries; i++) { entry = &e820_table->entries[i]; diff --git a/arch/x86/xen/enlighten_hvm.c b/arch/x86/xen/enlighten_hvm.c index 6448c5071117..517a9d8d8f94 100644 --- a/arch/x86/xen/enlighten_hvm.c +++ b/arch/x86/xen/enlighten_hvm.c @@ -185,8 +185,7 @@ static int xen_cpu_dead_hvm(unsigned int cpu) if (xen_have_vector_callback && xen_feature(XENFEAT_hvm_safe_pvclock)) xen_teardown_timer(cpu); - - return 0; + return 0; } static bool no_vector_callback __initdata; @@ -248,6 +247,11 @@ static __init bool xen_x2apic_available(void) return x2apic_supported(); } +static bool __init msi_ext_dest_id(void) +{ + return cpuid_eax(xen_cpuid_base() + 4) & XEN_HVM_CPUID_EXT_DEST_ID; +} + static __init void xen_hvm_guest_late_init(void) { #ifdef CONFIG_XEN_PVH @@ -310,6 +314,7 @@ struct hypervisor_x86 x86_hyper_xen_hvm __initdata = { .init.x2apic_available = xen_x2apic_available, .init.init_mem_mapping = xen_hvm_init_mem_mapping, .init.guest_late_init = xen_hvm_guest_late_init, + .init.msi_ext_dest_id = msi_ext_dest_id, .runtime.pin_vcpu = xen_pin_vcpu, .ignore_nopv = true, }; diff --git a/arch/x86/xen/vga.c b/arch/x86/xen/vga.c index 31b1e3477cb6..14ea32e734d5 100644 --- a/arch/x86/xen/vga.c +++ b/arch/x86/xen/vga.c @@ -57,6 +57,14 @@ void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size) screen_info->rsvd_size = info->u.vesa_lfb.rsvd_size; screen_info->rsvd_pos = info->u.vesa_lfb.rsvd_pos; + if (size >= offsetof(struct dom0_vga_console_info, + u.vesa_lfb.ext_lfb_base) + + sizeof(info->u.vesa_lfb.ext_lfb_base) + && info->u.vesa_lfb.ext_lfb_base) { + screen_info->ext_lfb_base = info->u.vesa_lfb.ext_lfb_base; + screen_info->capabilities |= VIDEO_CAPABILITY_64BIT_BASE; + } + if (info->video_type == XEN_VGATYPE_EFI_LFB) { screen_info->orig_video_isVGA = VIDEO_TYPE_EFI; break; @@ -66,14 +74,6 @@ void __init xen_init_vga(const struct dom0_vga_console_info *info, size_t size) u.vesa_lfb.mode_attrs) + sizeof(info->u.vesa_lfb.mode_attrs)) screen_info->vesa_attributes = info->u.vesa_lfb.mode_attrs; - - if (size >= offsetof(struct dom0_vga_console_info, - u.vesa_lfb.ext_lfb_base) - + sizeof(info->u.vesa_lfb.ext_lfb_base) - && info->u.vesa_lfb.ext_lfb_base) { - screen_info->ext_lfb_base = info->u.vesa_lfb.ext_lfb_base; - screen_info->capabilities |= VIDEO_CAPABILITY_64BIT_BASE; - } break; } } |