diff options
Diffstat (limited to 'arch')
68 files changed, 993 insertions, 1564 deletions
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index de88c9297b68..f1ac7fbf54a9 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -138,7 +138,7 @@ void ams_delta_latch2_write(u16 mask, u16 value) static void __init ams_delta_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct map_desc ams_delta_io_desc[] __initdata = { @@ -391,7 +391,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .reserve = omap_reserve, .init_irq = ams_delta_init_irq, .init_machine = ams_delta_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END EXPORT_SYMBOL(ams_delta_latch1_write); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 87f173d93557..a6b1bea50371 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -329,7 +329,7 @@ static void __init omap_fsample_init(void) static void __init omap_fsample_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ @@ -394,5 +394,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .reserve = omap_reserve, .init_irq = omap_fsample_init_irq, .init_machine = omap_fsample_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 23f4ab9e2651..04fc356c40fa 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -31,7 +31,7 @@ static void __init omap_generic_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /* assume no Mini-AB port */ @@ -99,5 +99,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .reserve = omap_reserve, .init_irq = omap_generic_init_irq, .init_machine = omap_generic_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index ba3bd09c4754..cb7fb1aa3dca 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -376,7 +376,7 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = { static void __init h2_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct omap_usb_config h2_usb_config __initdata = { @@ -466,5 +466,5 @@ MACHINE_START(OMAP_H2, "TI-H2") .reserve = omap_reserve, .init_irq = h2_init_irq, .init_machine = h2_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ac48677672ee..31f34875ffad 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -439,7 +439,7 @@ static void __init h3_init(void) static void __init h3_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static void __init h3_map_io(void) @@ -454,5 +454,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .reserve = omap_reserve, .init_irq = h3_init_irq, .init_machine = h3_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index ba05a51f9408..36e06ea7ec65 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -605,7 +605,7 @@ static void __init htcherald_init_irq(void) { printk(KERN_INFO "htcherald_init_irq.\n"); omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } MACHINE_START(HERALD, "HTC Herald") @@ -616,5 +616,5 @@ MACHINE_START(HERALD, "HTC Herald") .reserve = omap_reserve, .init_irq = htcherald_init_irq, .init_machine = htcherald_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 2d9b8cbd7a14..0b1ba462d388 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -292,7 +292,7 @@ static void __init innovator_init_smc91x(void) static void __init innovator_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } #ifdef CONFIG_ARCH_OMAP15XX @@ -464,5 +464,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .reserve = omap_reserve, .init_irq = innovator_init_irq, .init_machine = innovator_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index cfd084926146..5469ce247ffe 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -51,7 +51,7 @@ static void __init omap_nokia770_init_irq(void) omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static const unsigned int nokia770_keymap[] = { @@ -269,5 +269,5 @@ MACHINE_START(NOKIA770, "Nokia 770") .reserve = omap_reserve, .init_irq = omap_nokia770_init_irq, .init_machine = omap_nokia770_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e68dfde1918e..b08a21380772 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -282,7 +282,7 @@ static void __init osk_init_cf(void) static void __init osk_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct omap_usb_config osk_usb_config __initdata = { @@ -588,5 +588,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .reserve = omap_reserve, .init_irq = osk_init_irq, .init_machine = osk_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index c9d38f47845f..459cb6bfed55 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -62,7 +62,7 @@ static void __init omap_palmte_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static const unsigned int palmte_keymap[] = { @@ -280,5 +280,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .reserve = omap_reserve, .init_irq = omap_palmte_init_irq, .init_machine = omap_palmte_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index f04f2d36e7d3..b214f45f646c 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -266,7 +266,7 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = { static void __init omap_palmtt_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct omap_usb_config palmtt_usb_config __initdata = { @@ -326,5 +326,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .reserve = omap_reserve, .init_irq = omap_palmtt_init_irq, .init_machine = omap_palmtt_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 45f01d2c3a7a..9b0ea48d35fd 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -61,7 +61,7 @@ static void __init omap_palmz71_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static const unsigned int palmz71_keymap[] = { @@ -346,5 +346,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .reserve = omap_reserve, .init_irq = omap_palmz71_init_irq, .init_machine = omap_palmz71_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 3c8ee8489458..67acd4142639 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -297,7 +297,7 @@ static void __init omap_perseus2_init(void) static void __init omap_perseus2_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { @@ -355,5 +355,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .reserve = omap_reserve, .init_irq = omap_perseus2_init_irq, .init_machine = omap_perseus2_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 0ad781db4e66..9c3b7c52d9cf 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -411,7 +411,7 @@ static void __init omap_sx1_init(void) static void __init omap_sx1_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /*----------------------------------------*/ @@ -426,5 +426,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .reserve = omap_reserve, .init_irq = omap_sx1_init_irq, .init_machine = omap_sx1_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 65d24204937a..036edc0ee9b6 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -162,7 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = { static void __init voiceblue_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static void __init voiceblue_map_io(void) @@ -306,5 +306,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .reserve = omap_reserve, .init_irq = voiceblue_init_irq, .init_machine = voiceblue_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 5d3da7a63af3..e2b9c901ab67 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -175,7 +175,7 @@ static struct irq_chip omap_irq_chip = { .irq_set_wake = omap_wake_irq, }; -void __init omap_init_irq(void) +void __init omap1_init_irq(void) { int i, j; diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 03e1e1062ad4..a1837771e031 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -297,7 +297,7 @@ static inline int omap_32k_timer_usable(void) * Timer initialization * --------------------------------------------------------------------------- */ -static void __init omap_timer_init(void) +static void __init omap1_timer_init(void) { if (omap_32k_timer_usable()) { preferred_sched_clock_init(1); @@ -307,6 +307,6 @@ static void __init omap_timer_init(void) } } -struct sys_timer omap_timer = { - .init = omap_timer_init, +struct sys_timer omap1_timer = { + .init = omap1_timer_init, }; diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 13d7b8f145bd..96604a50c4fe 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -183,10 +183,6 @@ static __init void omap_init_32k_timer(void) bool __init omap_32k_timer_init(void) { omap_init_clocksource_32k(); - -#ifdef CONFIG_OMAP_DM_TIMER - omap_dm_timer_init(); -#endif omap_init_32k_timer(); return true; diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b14807794401..adbe82d72d4e 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \ +obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o omap-2-3-common = irq.o sdrc.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 5de6eac0a725..2028464cf5b9 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -260,7 +260,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .reserve = omap_reserve, .map_io = omap_2430sdp_map_io, .init_early = omap_2430sdp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_2430sdp_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5dac974be625..12fae21346cf 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -804,7 +804,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_3430sdp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_3430sdp_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index a5933cc15caa..e4f37b57a0c4 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -219,7 +219,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_sdp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_sdp_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 63de2d396e2d..d7df07ef2cea 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -40,7 +40,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "control.h" #include "common-board-devices.h" @@ -295,9 +294,6 @@ static void __init omap_4430sdp_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(1); -#endif } static struct omap_musb_board_data musb_board_data = { @@ -333,16 +329,11 @@ static struct omap2_hsmmc_info mmc[] = { }; static struct regulator_consumer_supply sdp4430_vaux_supply[] = { - { - .supply = "vmmc", - .dev_name = "omap_hsmmc.1", - }, + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; + static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { - { - .supply = "vmmc", - .dev_name = "omap_hsmmc.0", - }, + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; static int omap4_twl6030_hsmmc_late_init(struct device *dev) @@ -399,7 +390,7 @@ static struct regulator_init_data sdp4430_vaux1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, + .num_consumer_supplies = ARRAY_SIZE(sdp4430_vaux_supply), .consumer_supplies = sdp4430_vaux_supply, }; @@ -773,5 +764,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .init_early = omap_4430sdp_init_early, .init_irq = gic_init_irq, .init_machine = omap_4430sdp_init, - .timer = &omap_timer, + .timer = &omap4_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 5e438a77cd72..5f2b55ff04ff 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -104,7 +104,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_crane_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = am3517_crane_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 63af4171c043..f3006c304150 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -494,7 +494,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_evm_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = am3517_evm_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index b124bdfb4239..70211703ff9f 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -354,7 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .reserve = omap_reserve, .map_io = omap_apollon_map_io, .init_early = omap_apollon_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_apollon_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 77456dec93ea..d76dca788540 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -162,9 +162,7 @@ static struct mtd_partition cm_t35_nand_partitions[] = { static struct omap_nand_platform_data cm_t35_nand_data = { .parts = cm_t35_nand_partitions, .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ .cs = 0, - }; static void __init cm_t35_init_nand(void) @@ -337,19 +335,21 @@ static void __init cm_t35_init_display(void) } } -static struct regulator_consumer_supply cm_t35_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply cm_t35_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply cm_t35_vdac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; -static struct regulator_consumer_supply cm_t35_vdvi_supply = - REGULATOR_SUPPLY("vdvi", "omapdss"); +static struct regulator_consumer_supply cm_t35_vdvi_supply[] = { + REGULATOR_SUPPLY("vdvi", "omapdss"), +}; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data cm_t35_vmmc1 = { @@ -362,8 +362,8 @@ static struct regulator_init_data cm_t35_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply), + .consumer_supplies = cm_t35_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -377,8 +377,8 @@ static struct regulator_init_data cm_t35_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply), + .consumer_supplies = cm_t35_vsim_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -391,8 +391,8 @@ static struct regulator_init_data cm_t35_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vdac_supply, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vdac_supply), + .consumer_supplies = cm_t35_vdac_supply, }; /* VPLL2 for digital video outputs */ @@ -406,8 +406,8 @@ static struct regulator_init_data cm_t35_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vdvi_supply), + .consumer_supplies = cm_t35_vdvi_supply, }; static struct twl4030_usb_data cm_t35_usb_data = { @@ -481,10 +481,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - cm_t35_vmmc1_supply.dev = mmc[0].dev; - cm_t35_vsim_supply.dev = mmc[0].dev; - return 0; } @@ -646,7 +642,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t35_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = cm_t35_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index c3a9fd35034a..05c72f4c1b57 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -236,7 +236,6 @@ static struct mtd_partition cm_t3517_nand_partitions[] = { static struct omap_nand_platform_data cm_t3517_nand_data = { .parts = cm_t3517_nand_partitions, .nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ .cs = 0, }; @@ -304,7 +303,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t3517_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = cm_t3517_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 34956ec83296..949dbeabab26 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -58,7 +58,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #define OMAP_DM9000_GPIO_IRQ 25 @@ -130,13 +129,14 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) gpio_set_value_cansleep(dssdev->reset_gpio, 0); } -static struct regulator_consumer_supply devkit8000_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - +static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; /* ads7846 on SPI */ -static struct regulator_consumer_supply devkit8000_vio_supply = - REGULATOR_SUPPLY("vcc", "spi2.0"); +static struct regulator_consumer_supply devkit8000_vio_supply[] = { + REGULATOR_SUPPLY("vcc", "spi2.0"), +}; static struct panel_generic_dpi_data lcd_panel = { .name = "generic", @@ -186,8 +186,9 @@ static struct omap_dss_board_info devkit8000_dss_data = { .default_device = &devkit8000_lcd_device, }; -static struct regulator_consumer_supply devkit8000_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply devkit8000_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), @@ -284,8 +285,8 @@ static struct regulator_init_data devkit8000_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply), + .consumer_supplies = devkit8000_vmmc1_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -298,8 +299,8 @@ static struct regulator_init_data devkit8000_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vdda_dac_supply), + .consumer_supplies = devkit8000_vdda_dac_supply, }; /* VPLL1 for digital video outputs */ @@ -327,8 +328,8 @@ static struct regulator_init_data devkit8000_vio = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply), + .consumer_supplies = devkit8000_vio_supply, }; static struct twl4030_usb_data devkit8000_usb_data = { @@ -438,10 +439,7 @@ static void __init devkit8000_init_early(void) static void __init devkit8000_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } #define OMAP_DM9000_BASE 0x2c000000 @@ -707,5 +705,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .init_early = devkit8000_init_early, .init_irq = devkit8000_init_irq, .init_machine = devkit8000_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 729892fdcf2e..aa1b0cbe19d2 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -132,11 +132,7 @@ static struct gpmc_timings nand_timings = { }; static struct omap_nand_platform_data board_nand_data = { - .nand_setup = NULL, .gpmc_t = &nand_timings, - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .dev_ready = NULL, - .devsize = 0, /* '0' for 8-bit, '1' for 16-bit device */ }; void diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 73e3c31e8508..c6ecf607ebd6 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -70,7 +70,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") .reserve = omap_reserve, .map_io = omap_generic_map_io, .init_early = omap_generic_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_generic_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index bac7933b8cbb..45de2b319ec9 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -298,7 +298,7 @@ static void __init omap_h4_init_early(void) static void __init omap_h4_init_irq(void) { - omap_init_irq(); + omap2_init_irq(); } static struct at24_platform_data m24c01 = { @@ -388,5 +388,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .init_early = omap_h4_init_early, .init_irq = omap_h4_init_irq, .init_machine = omap_h4_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 0c1bfca3f731..f683835f936c 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -222,8 +222,9 @@ static inline void __init igep2_init_smsc911x(void) static inline void __init igep2_init_smsc911x(void) { } #endif -static struct regulator_consumer_supply igep_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply igep_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep_vmmc1 = { @@ -236,12 +237,13 @@ static struct regulator_init_data igep_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply), + .consumer_supplies = igep_vmmc1_supply, }; -static struct regulator_consumer_supply igep_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); +static struct regulator_consumer_supply igep_vio_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), +}; static struct regulator_init_data igep_vio = { .constraints = { @@ -254,20 +256,21 @@ static struct regulator_init_data igep_vio = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vio_supply), + .consumer_supplies = igep_vio_supply, }; -static struct regulator_consumer_supply igep_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply igep_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; static struct regulator_init_data igep_vmmc2 = { .constraints = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply), + .consumer_supplies = igep_vmmc2_supply, }; static struct fixed_voltage_config igep_vwlan = { @@ -703,9 +706,9 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = igep_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") @@ -713,7 +716,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = igep_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index f7d6038075f0..5d4328f19c0f 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -213,8 +213,8 @@ static struct twl4030_madc_platform_data ldp_madc_data = { .irq_line = 1, }; -static struct regulator_consumer_supply ldp_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply ldp_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -228,8 +228,8 @@ static struct regulator_init_data ldp_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &ldp_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply), + .consumer_supplies = ldp_vmmc1_supply, }; /* ads7846 on SPI */ @@ -341,8 +341,6 @@ static void __init omap_ldp_init(void) ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - ldp_vmmc1_supply.dev = mmc[0].dev; } MACHINE_START(OMAP_LDP, "OMAP LDP board") @@ -350,7 +348,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_ldp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_ldp_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8d74318ed495..e11f0c5d608a 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -699,9 +699,9 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") @@ -709,9 +709,9 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") @@ -719,7 +719,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7f21d24bd437..2d8dfb3213bf 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -50,7 +50,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "pm.h" #include "common-board-devices.h" @@ -210,8 +209,9 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, }; -static struct regulator_consumer_supply beagle_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply beagle_vdac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static struct regulator_consumer_supply beagle_vdvi_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), @@ -239,12 +239,12 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply beagle_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply beagle_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply beagle_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply beagle_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct gpio_led gpio_leds[]; @@ -267,10 +267,6 @@ static int beagle_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - beagle_vmmc1_supply.dev = mmc[0].dev; - beagle_vsim_supply.dev = mmc[0].dev; - /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active * high / others active low) @@ -336,8 +332,8 @@ static struct regulator_init_data beagle_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vmmc1_supply), + .consumer_supplies = beagle_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -351,8 +347,8 @@ static struct regulator_init_data beagle_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vsim_supply), + .consumer_supplies = beagle_vsim_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -365,8 +361,8 @@ static struct regulator_init_data beagle_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdac_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vdac_supply), + .consumer_supplies = beagle_vdac_supply, }; /* VPLL2 for digital video outputs */ @@ -486,10 +482,7 @@ static void __init omap3_beagle_init_early(void) static void __init omap3_beagle_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } static struct platform_device *omap3_beagle_devices[] __initdata = { @@ -599,5 +592,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .init_early = omap3_beagle_init_early, .init_irq = omap3_beagle_init_irq, .init_machine = omap3_beagle_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b4d43464a303..57bce0f2e195 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -273,12 +273,12 @@ static struct omap_dss_board_info omap3_evm_dss_data = { .default_device = &omap3_evm_lcd_device, }; -static struct regulator_consumer_supply omap3evm_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap3evm_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply omap3evm_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -292,8 +292,8 @@ static struct regulator_init_data omap3evm_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply), + .consumer_supplies = omap3evm_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -307,8 +307,8 @@ static struct regulator_init_data omap3evm_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply), + .consumer_supplies = omap3evm_vsim_supply, }; static struct omap2_hsmmc_info mmc[] = { @@ -365,10 +365,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - omap3evm_vmmc1_supply.dev = mmc[0].dev; - omap3evm_vsim_supply.dev = mmc[0].dev; - /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. @@ -449,8 +445,9 @@ static struct twl4030_codec_data omap3evm_codec_data = { .audio = &omap3evm_audio_data, }; -static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply omap3_evm_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_evm_vdac = { @@ -463,8 +460,8 @@ static struct regulator_init_data omap3_evm_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_evm_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vdda_dac_supply), + .consumer_supplies = omap3_evm_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ @@ -488,8 +485,9 @@ static struct regulator_init_data omap3_evm_vpll2 = { }; /* ads7846 on SPI */ -static struct regulator_consumer_supply omap3evm_vio_supply = - REGULATOR_SUPPLY("vcc", "spi1.0"); +static struct regulator_consumer_supply omap3evm_vio_supply[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; /* VIO for ads7846 */ static struct regulator_init_data omap3evm_vio = { @@ -502,8 +500,8 @@ static struct regulator_init_data omap3evm_vio = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply), + .consumer_supplies = omap3evm_vio_supply, }; #ifdef CONFIG_WL12XX_PLATFORM_DATA @@ -511,16 +509,17 @@ static struct regulator_init_data omap3evm_vio = { #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) -static struct regulator_consumer_supply omap3evm_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; /* VMMC2 for driving the WL12xx module */ static struct regulator_init_data omap3evm_vmmc2 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply), + .consumer_supplies = omap3evm_vmmc2_supply, }; static struct fixed_voltage_config omap3evm_vwlan = { @@ -740,7 +739,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_evm_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3_evm_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 60d9be49dbab..703aeb5b8fd4 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -35,7 +35,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "control.h" #include "common-board-devices.h" @@ -55,8 +54,8 @@ #define OMAP3_TORPEDO_MMC_GPIO_CD 127 #define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129 -static struct regulator_consumer_supply omap3logic_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -71,8 +70,8 @@ static struct regulator_init_data omap3logic_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3logic_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3logic_vmmc1_supply), + .consumer_supplies = omap3logic_vmmc1_supply, }; static struct twl4030_gpio_platform_data omap3logic_gpio_data = { @@ -130,8 +129,6 @@ static void __init board_mmc_init(void) } omap2_hsmmc_init(board_mmc_info); - /* link regulators to MMC adapters */ - omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev; } static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { @@ -215,16 +212,16 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .boot_params = 0x80000100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3logic_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .boot_params = 0x80000100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3logic_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 23f71d40883e..d4ea9408560e 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -320,17 +320,21 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { .setup = omap3pandora_twl_gpio_setup, }; -static struct regulator_consumer_supply pandora_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply pandora_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; -static struct regulator_consumer_supply pandora_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply pandora_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1") +}; -static struct regulator_consumer_supply pandora_vmmc3_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"); +static struct regulator_consumer_supply pandora_vmmc3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), +}; -static struct regulator_consumer_supply pandora_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply pandora_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), @@ -338,11 +342,13 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; -static struct regulator_consumer_supply pandora_vcc_lcd_supply = - REGULATOR_SUPPLY("vcc", "display0"); +static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { + REGULATOR_SUPPLY("vcc", "display0"), +}; -static struct regulator_consumer_supply pandora_usb_phy_supply = - REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"); +static struct regulator_consumer_supply pandora_usb_phy_supply[] = { + REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"), +}; /* ads7846 on SPI and 2 nub controllers on I2C */ static struct regulator_consumer_supply pandora_vaux4_supplies[] = { @@ -351,8 +357,9 @@ static struct regulator_consumer_supply pandora_vaux4_supplies[] = { REGULATOR_SUPPLY("vcc", "3-0067"), }; -static struct regulator_consumer_supply pandora_adac_supply = - REGULATOR_SUPPLY("vcc", "soc-audio"); +static struct regulator_consumer_supply pandora_adac_supply[] = { + REGULATOR_SUPPLY("vcc", "soc-audio"), +}; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data pandora_vmmc1 = { @@ -365,8 +372,8 @@ static struct regulator_init_data pandora_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc1_supply), + .consumer_supplies = pandora_vmmc1_supply, }; /* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */ @@ -380,8 +387,8 @@ static struct regulator_init_data pandora_vmmc2 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc2_supply), + .consumer_supplies = pandora_vmmc2_supply, }; /* VDAC for DSS driving S-Video */ @@ -395,8 +402,8 @@ static struct regulator_init_data pandora_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vdda_dac_supply), + .consumer_supplies = pandora_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ @@ -425,8 +432,8 @@ static struct regulator_init_data pandora_vaux1 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vcc_lcd_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vcc_lcd_supply), + .consumer_supplies = pandora_vcc_lcd_supply, }; /* VAUX2 for USB host PHY */ @@ -440,8 +447,8 @@ static struct regulator_init_data pandora_vaux2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_usb_phy_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_usb_phy_supply), + .consumer_supplies = pandora_usb_phy_supply, }; /* VAUX4 for ads7846 and nubs */ @@ -470,8 +477,8 @@ static struct regulator_init_data pandora_vsim = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_adac_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_adac_supply), + .consumer_supplies = pandora_adac_supply, }; /* Fixed regulator internal to Wifi module */ @@ -479,8 +486,8 @@ static struct regulator_init_data pandora_vmmc3 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vmmc3_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply), + .consumer_supplies = pandora_vmmc3_supply, }; static struct fixed_voltage_config pandora_vwlan = { @@ -643,7 +650,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3pandora_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3pandora_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 0c108a212ea2..b8ad4dd5bbbf 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -52,7 +52,6 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) @@ -206,12 +205,12 @@ static struct omap_dss_board_info omap3_stalker_dss_data = { .default_device = &omap3_stalker_dvi_device, }; -static struct regulator_consumer_supply omap3stalker_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap3stalker_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply omap3stalker_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -224,8 +223,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply), + .consumer_supplies = omap3stalker_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -238,8 +237,8 @@ static struct regulator_init_data omap3stalker_vsim = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply), + .consumer_supplies = omap3stalker_vsim_supply, }; static struct omap2_hsmmc_info mmc[] = { @@ -321,10 +320,6 @@ omap3stalker_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - omap3stalker_vmmc1_supply.dev = mmc[0].dev; - omap3stalker_vsim_supply.dev = mmc[0].dev; - /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. @@ -403,8 +398,9 @@ static struct twl4030_codec_data omap3stalker_codec_data = { .audio = &omap3stalker_audio_data, }; -static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; /* VDAC for DSS driving S-Video */ static struct regulator_init_data omap3_stalker_vdac = { @@ -417,8 +413,8 @@ static struct regulator_init_data omap3_stalker_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vdda_dac_supply), + .consumer_supplies = omap3_stalker_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ @@ -494,10 +490,7 @@ static void __init omap3_stalker_init_early(void) static void __init omap3_stalker_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } static struct platform_device *omap3_stalker_devices[] __initdata = { @@ -560,5 +553,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .init_early = omap3_stalker_init_early, .init_irq = omap3_stalker_init_irq, .init_machine = omap3_stalker_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 5f649faf7377..57e6ed34ebbc 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -51,7 +51,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #include <asm/setup.h> @@ -114,12 +113,12 @@ static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct regulator_consumer_supply touchbook_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply touchbook_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply touchbook_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply touchbook_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct gpio_led gpio_leds[]; @@ -137,10 +136,6 @@ static int touchbook_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - touchbook_vmmc1_supply.dev = mmc[0].dev; - touchbook_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ @@ -167,14 +162,18 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = { .setup = touchbook_twl_gpio_setup, }; -static struct regulator_consumer_supply touchbook_vdac_supply = { +static struct regulator_consumer_supply touchbook_vdac_supply[] = { +{ .supply = "vdac", .dev = &omap3_touchbook_lcd_device.dev, +}, }; -static struct regulator_consumer_supply touchbook_vdvi_supply = { +static struct regulator_consumer_supply touchbook_vdvi_supply[] = { +{ .supply = "vdvi", .dev = &omap3_touchbook_lcd_device.dev, +}, }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -188,8 +187,8 @@ static struct regulator_init_data touchbook_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply), + .consumer_supplies = touchbook_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -203,8 +202,8 @@ static struct regulator_init_data touchbook_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply), + .consumer_supplies = touchbook_vsim_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -217,8 +216,8 @@ static struct regulator_init_data touchbook_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdac_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vdac_supply), + .consumer_supplies = touchbook_vdac_supply, }; /* VPLL2 for digital video outputs */ @@ -232,8 +231,8 @@ static struct regulator_init_data touchbook_vpll2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdvi_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vdvi_supply), + .consumer_supplies = touchbook_vdvi_supply, }; static struct twl4030_usb_data touchbook_usb_data = { @@ -371,10 +370,7 @@ static void __init omap3_touchbook_init_early(void) static void __init omap3_touchbook_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } static struct platform_device *omap3_touchbook_devices[] __initdata = { @@ -449,5 +445,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .init_early = omap3_touchbook_init_early, .init_irq = omap3_touchbook_init_irq, .init_machine = omap3_touchbook_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 0cfe2005cb50..ee2034e37468 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -41,7 +41,6 @@ #include <plat/usb.h> #include <plat/mmc.h> #include <video/omap-panel-generic-dpi.h> -#include "timer-gp.h" #include "hsmmc.h" #include "control.h" @@ -183,23 +182,19 @@ static struct omap2_hsmmc_info mmc[] = { }; static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = { - { - .supply = "vmmc", - .dev_name = "omap_hsmmc.0", - }, + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap4_panda_vmmc5_supply = { - .supply = "vmmc", - .dev_name = "omap_hsmmc.4", +static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"), }; static struct regulator_init_data panda_vmmc5 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap4_panda_vmmc5_supply, + .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply), + .consumer_supplies = omap4_panda_vmmc5_supply, }; static struct fixed_voltage_config panda_vwlan = { @@ -312,7 +307,7 @@ static struct regulator_init_data omap4_panda_vmmc = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, + .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc_supply), .consumer_supplies = omap4_panda_vmmc_supply, }; @@ -716,5 +711,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .init_early = omap4_panda_init_early, .init_irq = gic_init_irq, .init_machine = omap4_panda_init, - .timer = &omap_timer, + .timer = &omap4_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 175e1ab2b04d..1bf2f39b9d0e 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -74,15 +74,16 @@ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) /* fixed regulator for ads7846 */ -static struct regulator_consumer_supply ads7846_supply = - REGULATOR_SUPPLY("vcc", "spi1.0"); +static struct regulator_consumer_supply ads7846_supply[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; static struct regulator_init_data vads7846_regulator = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &ads7846_supply, + .num_consumer_supplies = ARRAY_SIZE(ads7846_supply), + .consumer_supplies = ads7846_supply, }; static struct fixed_voltage_config vads7846 = { @@ -264,8 +265,9 @@ static struct omap_dss_board_info overo_dss_data = { .default_device = &overo_dvi_device, }; -static struct regulator_consumer_supply overo_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply overo_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static struct regulator_consumer_supply overo_vdds_dsi_supply[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), @@ -319,8 +321,8 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply overo_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply overo_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) @@ -415,8 +417,6 @@ static int overo_twl_gpio_setup(struct device *dev, { omap2_hsmmc_init(mmc); - overo_vmmc1_supply.dev = mmc[0].dev; - #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -447,8 +447,8 @@ static struct regulator_init_data overo_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &overo_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply), + .consumer_supplies = overo_vmmc1_supply, }; /* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ @@ -461,8 +461,8 @@ static struct regulator_init_data overo_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &overo_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(overo_vdda_dac_supply), + .consumer_supplies = overo_vdda_dac_supply, }; /* VPLL2 for digital video outputs */ @@ -615,7 +615,7 @@ MACHINE_START(OVERO, "Gumstix Overo") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = overo_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = overo_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 42d10b12da3c..54dceb163415 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -163,7 +163,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .reserve = omap_reserve, .map_io = rm680_map_io, .init_early = rm680_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = rm680_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 990366726c58..5e559dda3cc3 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -358,14 +358,17 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct regulator_consumer_supply rx51_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply rx51_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; -static struct regulator_consumer_supply rx51_vaux3_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply rx51_vaux3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; -static struct regulator_consumer_supply rx51_vsim_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); +static struct regulator_consumer_supply rx51_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), +}; static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { /* tlv320aic3x analog supplies */ @@ -452,8 +455,8 @@ static struct regulator_init_data rx51_vaux3_mmc = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vaux3_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), + .consumer_supplies = rx51_vaux3_supply, }; static struct regulator_init_data rx51_vaux4 = { @@ -479,8 +482,8 @@ static struct regulator_init_data rx51_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), + .consumer_supplies = rx51_vmmc1_supply, }; static struct regulator_init_data rx51_vmmc2 = { @@ -511,8 +514,8 @@ static struct regulator_init_data rx51_vsim = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), + .consumer_supplies = rx51_vsim_supply, }; static struct regulator_init_data rx51_vdac = { @@ -526,7 +529,7 @@ static struct regulator_init_data rx51_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, + .num_consumer_supplies = ARRAY_SIZE(rx51_vdac_supply), .consumer_supplies = rx51_vdac_supply, }; diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index fec4cac8fa0a..5ea142f9bc97 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -160,7 +160,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = rx51_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index 09fa7bfff8d6..a85d5b0b11da 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -33,11 +33,6 @@ static void __init ti8168_init_early(void) omap2_init_common_devices(NULL, NULL); } -static void __init ti8168_evm_init_irq(void) -{ - omap_init_irq(); -} - static void __init ti8168_evm_init(void) { omap_serial_init(); @@ -56,7 +51,7 @@ MACHINE_START(TI8168EVM, "ti8168evm") .boot_params = 0x80000100, .map_io = ti8168_evm_map_io, .init_early = ti8168_init_early, - .init_irq = ti8168_evm_init_irq, - .timer = &omap_timer, + .init_irq = ti816x_init_irq, + .timer = &omap3_timer, .init_machine = ti8168_evm_init, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 118c6f53c5eb..8495f82fcbab 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -105,21 +105,20 @@ static struct twl4030_keypad_data zoom_kp_twl4030_data = { .rep = 1, }; -static struct regulator_consumer_supply zoom_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply zoom_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply zoom_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply zoom_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply zoom_vmmc2_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply zoom_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; -static struct regulator_consumer_supply zoom_vmmc3_supply = { - .supply = "vmmc", - .dev_name = "omap_hsmmc.2", +static struct regulator_consumer_supply zoom_vmmc3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), }; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ @@ -133,8 +132,8 @@ static struct regulator_init_data zoom_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc1_supply), + .consumer_supplies = zoom_vmmc1_supply, }; /* VMMC2 for MMC2 card */ @@ -148,8 +147,8 @@ static struct regulator_init_data zoom_vmmc2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc2_supply), + .consumer_supplies = zoom_vmmc2_supply, }; /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ @@ -163,16 +162,16 @@ static struct regulator_init_data zoom_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vsim_supply), + .consumer_supplies = zoom_vsim_supply, }; static struct regulator_init_data zoom_vmmc3 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vmmc3_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc3_supply), + .consumer_supplies = zoom_vmmc3_supply, }; static struct fixed_voltage_config zoom_vwlan = { @@ -232,8 +231,9 @@ static struct regulator_consumer_supply zoom_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; -static struct regulator_consumer_supply zoom_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply zoom_vdda_dac_supply[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; static struct regulator_init_data zoom_vpll2 = { .constraints = { @@ -257,8 +257,8 @@ static struct regulator_init_data zoom_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vdda_dac_supply), + .consumer_supplies = zoom_vdda_dac_supply, }; static int zoom_twl_gpio_setup(struct device *dev, @@ -270,13 +270,6 @@ static int zoom_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters ... we "know" the - * regulators will be set up only *after* we return. - */ - zoom_vmmc1_supply.dev = mmc[0].dev; - zoom_vsim_supply.dev = mmc[0].dev; - zoom_vmmc2_supply.dev = mmc[1].dev; - ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable"); if (ret) diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4b133d75c935..8a98c3c303fc 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -137,9 +137,9 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") @@ -147,7 +147,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 94ccf464677b..0043fa8e3703 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -115,9 +115,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, #endif #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -static struct omap_nand_platform_data nand_data = { - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; +static struct omap_nand_platform_data nand_data; void __init omap_nand_flash_init(int options, struct mtd_partition *parts, int nr_parts) @@ -148,7 +146,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts, nand_data.cs = nandcs; nand_data.parts = parts; nand_data.nr_parts = nr_parts; - nand_data.options = options; + nand_data.devsize = options; printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); if (gpmc_nand_init(&nand_data) < 0) diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index c1791d08ae56..8ad210bda9a9 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -20,8 +20,6 @@ #include <plat/board.h> #include <plat/gpmc.h> -static struct omap_nand_platform_data *gpmc_nand_data; - static struct resource gpmc_nand_resource = { .flags = IORESOURCE_MEM, }; @@ -33,7 +31,7 @@ static struct platform_device gpmc_nand_device = { .resource = &gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime(void) +static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) { struct gpmc_timings t; int err; @@ -83,13 +81,11 @@ static int omap2_nand_gpmc_retime(void) return 0; } -int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data) +int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) { int err = 0; struct device *dev = &gpmc_nand_device.dev; - gpmc_nand_data = _nand_data; - gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime; gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, @@ -100,7 +96,7 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data) } /* Set timings in GPMC */ - err = omap2_nand_gpmc_retime(); + err = omap2_nand_gpmc_retime(gpmc_nand_data); if (err < 0) { dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 441e79d043a7..2ce1ce6fb4db 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -333,23 +333,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } +/* See irq.c, omap4-common.c and entry-macro.S */ void __iomem *omap_irq_base; -/* - * Initialize asm_irq_base for entry-macro.S - */ -static inline void omap_irq_base_init(void) -{ - if (cpu_is_omap24xx()) - omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE); - else if (cpu_is_omap34xx()) - omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE); - else if (cpu_is_omap44xx()) - omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE); - else - pr_err("Could not initialize omap_irq_base\n"); -} - void __init omap2_init_common_infrastructure(void) { u8 postsetup_state; @@ -422,7 +408,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, _omap2_init_reprogram_sdrc(); } - omap_irq_base_init(); } /* diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 3af2b7a1045e..3a12f7586a4c 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -141,25 +141,20 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) IRQ_NOREQUEST | IRQ_NOPROBE, 0); } -void __init omap_init_irq(void) +static void __init omap_init_irq(u32 base, int nr_irqs) { unsigned long nr_of_irqs = 0; unsigned int nr_banks = 0; int i, j; + omap_irq_base = ioremap(base, SZ_4K); + if (WARN_ON(!omap_irq_base)) + return; + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { - unsigned long base = 0; struct omap_irq_bank *bank = irq_banks + i; - if (cpu_is_omap24xx()) - base = OMAP24XX_IC_BASE; - else if (cpu_is_omap34xx()) - base = OMAP34XX_IC_BASE; - - BUG_ON(!base); - - if (cpu_is_ti816x()) - bank->nr_irqs = 128; + bank->nr_irqs = nr_irqs; /* Static mapping, never released */ bank->base_reg = ioremap(base, SZ_4K); @@ -181,6 +176,21 @@ void __init omap_init_irq(void) nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); } +void __init omap2_init_irq(void) +{ + omap_init_irq(OMAP24XX_IC_BASE, 96); +} + +void __init omap3_init_irq(void) +{ + omap_init_irq(OMAP34XX_IC_BASE, 96); +} + +void __init ti816x_init_irq(void) +{ + omap_init_irq(OMAP34XX_IC_BASE, 128); +} + #ifdef CONFIG_ARCH_OMAP3 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 9ef8c29dd817..35ac3e5f6e94 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -19,6 +19,8 @@ #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> +#include <plat/irqs.h> + #include <mach/hardware.h> #include <mach/omap4-common.h> @@ -31,17 +33,15 @@ void __iomem *gic_dist_base_addr; void __init gic_init_irq(void) { - void __iomem *gic_cpu_base; - /* Static mapping, never released */ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); BUG_ON(!gic_dist_base_addr); /* Static mapping, never released */ - gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); - BUG_ON(!gic_cpu_base); + omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); + BUG_ON(!omap_irq_base); - gic_init(0, 29, gic_dist_base_addr, gic_cpu_base); + gic_init(0, 29, gic_dist_base_addr, omap_irq_base); } #ifdef CONFIG_CACHE_L2X0 diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 3feb475bd14d..4411163e012d 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -39,25 +39,6 @@ #include "pm.h" u32 enable_off_mode; -u32 wakeup_timer_seconds; -u32 wakeup_timer_milliseconds; - -void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) -{ - u32 tick_rate, cycles; - - if (!seconds && !milliseconds) - return; - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); - cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; - omap_dm_timer_stop(gptimer_wakeup); - omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); - - pr_info("PM: Resume timer in %u.%03u secs" - " (%d ticks at %d ticks/sec.)\n", - seconds, milliseconds, cycles, tick_rate); -} #ifdef CONFIG_DEBUG_FS #include <linux/debugfs.h> @@ -259,9 +240,6 @@ static int option_set(void *data, u64 val) { u32 *option = data; - if (option == &wakeup_timer_milliseconds && val >= 1000) - return -EINVAL; - *option = val; if (option == &enable_off_mode) { @@ -298,11 +276,6 @@ static int __init pm_dbg_init(void) (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d, &enable_off_mode, &pm_dbg_option_fops); - (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d, - &wakeup_timer_seconds, &pm_dbg_option_fops); - (void) debugfs_create_file("wakeup_timer_milliseconds", - S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds, - &pm_dbg_option_fops); pm_dbg_init_done = 1; return 0; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index ea58f5dd2400..babac19e3ec1 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -60,15 +60,9 @@ inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); -extern u32 wakeup_timer_seconds; -extern u32 wakeup_timer_milliseconds; -extern struct omap_dm_timer *gptimer_wakeup; - #ifdef CONFIG_PM_DEBUG -extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds); extern u32 enable_off_mode; #else -#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0); #define enable_off_mode 0 #endif diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index cb342447544c..96a76245284c 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -532,10 +532,6 @@ static int omap3_pm_suspend(void) struct power_state *pwrst; int state, ret = 0; - if (wakeup_timer_seconds || wakeup_timer_milliseconds) - omap2_pm_wakeup_on_timer(wakeup_timer_seconds, - wakeup_timer_milliseconds); - /* Read current next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c deleted file mode 100644 index 3b9cf85f4bb9..000000000000 --- a/arch/arm/mach-omap2/timer-gp.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/timer-gp.c - * - * OMAP2 GP timer support. - * - * Copyright (C) 2009 Nokia Corporation - * - * Update to use new clocksource/clockevent layers - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * Copyright (C) 2007 MontaVista Software, Inc. - * - * Original driver: - * Copyright (C) 2005 Nokia Corporation - * Author: Paul Mundt <paul.mundt@nokia.com> - * Juha Yrjölä <juha.yrjola@nokia.com> - * OMAP Dual-mode timer framework support by Timo Teras - * - * Some parts based off of TI's 24xx code: - * - * Copyright (C) 2004-2009 Texas Instruments, Inc. - * - * Roughly modelled after the OMAP1 MPU timer code. - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/time.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> - -#include <asm/mach/time.h> -#include <plat/dmtimer.h> -#include <asm/localtimer.h> -#include <asm/sched_clock.h> -#include <plat/common.h> -#include <plat/omap_hwmod.h> - -#include "timer-gp.h" - - -/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ -#define MAX_GPTIMER_ID 12 - -static struct omap_dm_timer *gptimer; -static struct clock_event_device clockevent_gpt; -static u8 __initdata gptimer_id = 1; -static u8 __initdata inited; -struct omap_dm_timer *gptimer_wakeup; - -static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) -{ - struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id; - struct clock_event_device *evt = &clockevent_gpt; - - omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW); - - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static struct irqaction omap2_gp_timer_irq = { - .name = "gp timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = omap2_gp_timer_interrupt, -}; - -static int omap2_gp_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles); - - return 0; -} - -static void omap2_gp_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - u32 period; - - omap_dm_timer_stop(gptimer); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; - period -= 1; - omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period); - break; - case CLOCK_EVT_MODE_ONESHOT: - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device clockevent_gpt = { - .name = "gp timer", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_next_event = omap2_gp_timer_set_next_event, - .set_mode = omap2_gp_timer_set_mode, -}; - -/** - * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents - * @id: GPTIMER to use (1..MAX_GPTIMER_ID) - * - * Define the GPTIMER that the system should use for the tick timer. - * Meant to be called from board-*.c files in the event that GPTIMER1, the - * default, is unsuitable. Returns -EINVAL on error or 0 on success. - */ -int __init omap2_gp_clockevent_set_gptimer(u8 id) -{ - if (id < 1 || id > MAX_GPTIMER_ID) - return -EINVAL; - - BUG_ON(inited); - - gptimer_id = id; - - return 0; -} - -static void __init omap2_gp_clockevent_init(void) -{ - u32 tick_rate; - int src; - char clockevent_hwmod_name[8]; /* 8 = sizeof("timerXX0") */ - - inited = 1; - - sprintf(clockevent_hwmod_name, "timer%d", gptimer_id); - omap_hwmod_setup_one(clockevent_hwmod_name); - - gptimer = omap_dm_timer_request_specific(gptimer_id); - BUG_ON(gptimer == NULL); - gptimer_wakeup = gptimer; - -#if defined(CONFIG_OMAP_32K_TIMER) - src = OMAP_TIMER_SRC_32_KHZ; -#else - src = OMAP_TIMER_SRC_SYS_CLK; - WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " - "secure 32KiHz clock source\n"); -#endif - - if (gptimer_id != 12) - WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), - "timer-gp: omap_dm_timer_set_source() failed\n"); - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); - - pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", - gptimer_id, tick_rate); - - omap2_gp_timer_irq.dev_id = (void *)gptimer; - setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); - omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); - - clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC, - clockevent_gpt.shift); - clockevent_gpt.max_delta_ns = - clockevent_delta2ns(0xffffffff, &clockevent_gpt); - clockevent_gpt.min_delta_ns = - clockevent_delta2ns(3, &clockevent_gpt); - /* Timer internal resynch latency. */ - - clockevent_gpt.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_gpt); -} - -/* Clocksource code */ - -#ifdef CONFIG_OMAP_32K_TIMER -/* - * When 32k-timer is enabled, don't use GPTimer for clocksource - * instead, just leave default clocksource which uses the 32k - * sync counter. See clocksource setup in plat-omap/counter_32k.c - */ - -static void __init omap2_gp_clocksource_init(void) -{ - omap_init_clocksource_32k(); -} - -#else -/* - * clocksource - */ -static DEFINE_CLOCK_DATA(cd); -static struct omap_dm_timer *gpt_clocksource; -static cycle_t clocksource_read_cycles(struct clocksource *cs) -{ - return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource); -} - -static struct clocksource clocksource_gpt = { - .name = "gp timer", - .rating = 300, - .read = clocksource_read_cycles, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void notrace dmtimer_update_sched_clock(void) -{ - u32 cyc; - - cyc = omap_dm_timer_read_counter(gpt_clocksource); - - update_sched_clock(&cd, cyc, (u32)~0); -} - -/* Setup free-running counter for clocksource */ -static void __init omap2_gp_clocksource_init(void) -{ - static struct omap_dm_timer *gpt; - u32 tick_rate; - static char err1[] __initdata = KERN_ERR - "%s: failed to request dm-timer\n"; - static char err2[] __initdata = KERN_ERR - "%s: can't register clocksource!\n"; - - gpt = omap_dm_timer_request(); - if (!gpt) - printk(err1, clocksource_gpt.name); - gpt_clocksource = gpt; - - omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK); - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt)); - - omap_dm_timer_set_load_start(gpt, 1, 0); - - init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate); - - if (clocksource_register_hz(&clocksource_gpt, tick_rate)) - printk(err2, clocksource_gpt.name); -} -#endif - -static void __init omap2_gp_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - if (cpu_is_omap44xx()) { - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); - BUG_ON(!twd_base); - } -#endif - omap_dm_timer_init(); - - omap2_gp_clockevent_init(); - omap2_gp_clocksource_init(); -} - -struct sys_timer omap_timer = { - .init = omap2_gp_timer_init, -}; diff --git a/arch/arm/mach-omap2/timer-gp.h b/arch/arm/mach-omap2/timer-gp.h deleted file mode 100644 index 5c1072c6783b..000000000000 --- a/arch/arm/mach-omap2/timer-gp.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * OMAP2/3 GPTIMER support.headers - * - * Copyright (C) 2009 Nokia Corporation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H - -extern int __init omap2_gp_clockevent_set_gptimer(u8 id); - -#endif diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c new file mode 100644 index 000000000000..e9640728239b --- /dev/null +++ b/arch/arm/mach-omap2/timer.c @@ -0,0 +1,342 @@ +/* + * linux/arch/arm/mach-omap2/timer.c + * + * OMAP2 GP timer support. + * + * Copyright (C) 2009 Nokia Corporation + * + * Update to use new clocksource/clockevent layers + * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Original driver: + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * Juha Yrjölä <juha.yrjola@nokia.com> + * OMAP Dual-mode timer framework support by Timo Teras + * + * Some parts based off of TI's 24xx code: + * + * Copyright (C) 2004-2009 Texas Instruments, Inc. + * + * Roughly modelled after the OMAP1 MPU timer code. + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> + +#include <asm/mach/time.h> +#include <plat/dmtimer.h> +#include <asm/localtimer.h> +#include <asm/sched_clock.h> +#include <plat/common.h> +#include <plat/omap_hwmod.h> + +/* Parent clocks, eventually these will come from the clock framework */ + +#define OMAP2_MPU_SOURCE "sys_ck" +#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE +#define OMAP4_MPU_SOURCE "sys_clkin_ck" +#define OMAP2_32K_SOURCE "func_32k_ck" +#define OMAP3_32K_SOURCE "omap_32k_fck" +#define OMAP4_32K_SOURCE "sys_32k_ck" + +#ifdef CONFIG_OMAP_32K_TIMER +#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE +#define OMAP3_SECURE_TIMER 12 +#else +#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE +#define OMAP3_SECURE_TIMER 1 +#endif + +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 + +u32 sys_timer_reserved; + +/* Clockevent code */ + +static struct omap_dm_timer clkev; +static struct clock_event_device clockevent_gpt; + +static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_gpt; + + __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); + + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction omap2_gp_timer_irq = { + .name = "gp timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = omap2_gp_timer_interrupt, +}; + +static int omap2_gp_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST, + 0xffffffff - cycles, 1); + + return 0; +} + +static void omap2_gp_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + u32 period; + + __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + period = clkev.rate / HZ; + period -= 1; + /* Looks like we need to first set the load value separately */ + __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG, + 0xffffffff - period, 1); + __omap_dm_timer_load_start(clkev.io_base, + OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, + 0xffffffff - period, 1); + break; + case CLOCK_EVT_MODE_ONESHOT: + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device clockevent_gpt = { + .name = "gp timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_next_event = omap2_gp_timer_set_next_event, + .set_mode = omap2_gp_timer_set_mode, +}; + +static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, + int gptimer_id, + const char *fck_source) +{ + char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + struct omap_hwmod *oh; + size_t size; + int res = 0; + + sprintf(name, "timer%d", gptimer_id); + omap_hwmod_setup_one(name); + oh = omap_hwmod_lookup(name); + if (!oh) + return -ENODEV; + + timer->irq = oh->mpu_irqs[0].irq; + timer->phys_base = oh->slaves[0]->addr->pa_start; + size = oh->slaves[0]->addr->pa_end - timer->phys_base; + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, size); + if (!timer->io_base) + return -ENXIO; + + /* After the dmtimer is using hwmod these clocks won't be needed */ + sprintf(name, "gpt%d_fck", gptimer_id); + timer->fclk = clk_get(NULL, name); + if (IS_ERR(timer->fclk)) + return -ENODEV; + + sprintf(name, "gpt%d_ick", gptimer_id); + timer->iclk = clk_get(NULL, name); + if (IS_ERR(timer->iclk)) { + clk_put(timer->fclk); + return -ENODEV; + } + + omap_hwmod_enable(oh); + + sys_timer_reserved |= (1 << (gptimer_id - 1)); + + if (gptimer_id != 12) { + struct clk *src; + + src = clk_get(NULL, fck_source); + if (IS_ERR(src)) { + res = -EINVAL; + } else { + res = __omap_dm_timer_set_source(timer->fclk, src); + if (IS_ERR_VALUE(res)) + pr_warning("%s: timer%i cannot set source\n", + __func__, gptimer_id); + clk_put(src); + } + } + __omap_dm_timer_reset(timer->io_base, 1, 1); + timer->posted = 1; + + timer->rate = clk_get_rate(timer->fclk); + + timer->reserved = 1; + + return res; +} + +static void __init omap2_gp_clockevent_init(int gptimer_id, + const char *fck_source) +{ + int res; + + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + BUG_ON(res); + + omap2_gp_timer_irq.dev_id = (void *)&clkev; + setup_irq(clkev.irq, &omap2_gp_timer_irq); + + __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); + + clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC, + clockevent_gpt.shift); + clockevent_gpt.max_delta_ns = + clockevent_delta2ns(0xffffffff, &clockevent_gpt); + clockevent_gpt.min_delta_ns = + clockevent_delta2ns(3, &clockevent_gpt); + /* Timer internal resynch latency. */ + + clockevent_gpt.cpumask = cpumask_of(0); + clockevents_register_device(&clockevent_gpt); + + pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", + gptimer_id, clkev.rate); +} + +/* Clocksource code */ + +#ifdef CONFIG_OMAP_32K_TIMER +/* + * When 32k-timer is enabled, don't use GPTimer for clocksource + * instead, just leave default clocksource which uses the 32k + * sync counter. See clocksource setup in plat-omap/counter_32k.c + */ + +static void __init omap2_gp_clocksource_init(int unused, const char *dummy) +{ + omap_init_clocksource_32k(); +} + +#else + +static struct omap_dm_timer clksrc; + +/* + * clocksource + */ +static DEFINE_CLOCK_DATA(cd); +static cycle_t clocksource_read_cycles(struct clocksource *cs) +{ + return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1); +} + +static struct clocksource clocksource_gpt = { + .name = "gp timer", + .rating = 300, + .read = clocksource_read_cycles, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void notrace dmtimer_update_sched_clock(void) +{ + u32 cyc; + + cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1); + + update_sched_clock(&cd, cyc, (u32)~0); +} + +unsigned long long notrace sched_clock(void) +{ + u32 cyc = 0; + + if (clksrc.reserved) + cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1); + + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +/* Setup free-running counter for clocksource */ +static void __init omap2_gp_clocksource_init(int gptimer_id, + const char *fck_source) +{ + int res; + + res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source); + BUG_ON(res); + + pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", + gptimer_id, clksrc.rate); + + __omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1); + init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); + + if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) + pr_err("Could not register clocksource %s\n", + clocksource_gpt.name); +} +#endif + +#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ + clksrc_nr, clksrc_src) \ +static void __init omap##name##_timer_init(void) \ +{ \ + omap2_gp_clockevent_init((clkev_nr), clkev_src); \ + omap2_gp_clocksource_init((clksrc_nr), clksrc_src); \ +} + +#define OMAP_SYS_TIMER(name) \ +struct sys_timer omap##name##_timer = { \ + .init = omap##name##_timer_init, \ +}; + +#ifdef CONFIG_ARCH_OMAP2 +OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE) +OMAP_SYS_TIMER(2) +#endif + +#ifdef CONFIG_ARCH_OMAP3 +OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE) +OMAP_SYS_TIMER(3) +OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, + 2, OMAP3_MPU_SOURCE) +OMAP_SYS_TIMER(3_secure) +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static void __init omap4_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); + BUG_ON(!twd_base); +#endif + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); + omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE); +} +OMAP_SYS_TIMER(4) +#endif diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index f7fed6080190..c13bc3d3eb2c 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -126,7 +126,7 @@ static inline unsigned long long notrace _omap_32k_sched_clock(void) return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); } -#ifndef CONFIG_OMAP_MPU_TIMER +#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER) unsigned long long notrace sched_clock(void) { return _omap_32k_sched_clock(); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index ee9f6ebba29b..8dfb8186b2c2 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -41,127 +41,6 @@ #include <plat/dmtimer.h> #include <mach/irqs.h> -/* register offsets */ -#define _OMAP_TIMER_ID_OFFSET 0x00 -#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10 -#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14 -#define _OMAP_TIMER_STAT_OFFSET 0x18 -#define _OMAP_TIMER_INT_EN_OFFSET 0x1c -#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 -#define _OMAP_TIMER_CTRL_OFFSET 0x24 -#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) -#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) -#define OMAP_TIMER_CTRL_PT (1 << 12) -#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) -#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) -#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) -#define OMAP_TIMER_CTRL_SCPWM (1 << 7) -#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ -#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ -#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ -#define OMAP_TIMER_CTRL_POSTED (1 << 2) -#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ -#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ -#define _OMAP_TIMER_COUNTER_OFFSET 0x28 -#define _OMAP_TIMER_LOAD_OFFSET 0x2c -#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 -#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 -#define WP_NONE 0 /* no write pending bit */ -#define WP_TCLR (1 << 0) -#define WP_TCRR (1 << 1) -#define WP_TLDR (1 << 2) -#define WP_TTGR (1 << 3) -#define WP_TMAR (1 << 4) -#define WP_TPIR (1 << 5) -#define WP_TNIR (1 << 6) -#define WP_TCVR (1 << 7) -#define WP_TOCR (1 << 8) -#define WP_TOWR (1 << 9) -#define _OMAP_TIMER_MATCH_OFFSET 0x38 -#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c -#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 -#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ -#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ -#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ -#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ -#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ -#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ - -/* register offsets with the write pending bit encoded */ -#define WPSHIFT 16 - -#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \ - | (WP_TCLR << WPSHIFT)) - -#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \ - | (WP_TCRR << WPSHIFT)) - -#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \ - | (WP_TLDR << WPSHIFT)) - -#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \ - | (WP_TTGR << WPSHIFT)) - -#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \ - | (WP_TMAR << WPSHIFT)) - -#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \ - | (WP_TPIR << WPSHIFT)) - -#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \ - | (WP_TNIR << WPSHIFT)) - -#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \ - | (WP_TCVR << WPSHIFT)) - -#define OMAP_TIMER_TICK_INT_MASK_SET_REG \ - (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT)) - -#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ - (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) - -struct omap_dm_timer { - unsigned long phys_base; - int irq; -#ifdef CONFIG_ARCH_OMAP2PLUS - struct clk *iclk, *fclk; -#endif - void __iomem *io_base; - unsigned reserved:1; - unsigned enabled:1; - unsigned posted:1; -}; - static int dm_timer_count; #ifdef CONFIG_ARCH_OMAP1 @@ -291,11 +170,7 @@ static spinlock_t dm_timer_lock; */ static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg) { - if (timer->posted) - while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) - cpu_relax(); - return readl(timer->io_base + (reg & 0xff)); + return __omap_dm_timer_read(timer->io_base, reg, timer->posted); } /* @@ -307,11 +182,7 @@ static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg) static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, u32 value) { - if (timer->posted) - while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) - cpu_relax(); - writel(value, timer->io_base + (reg & 0xff)); + __omap_dm_timer_write(timer->io_base, reg, value, timer->posted); } static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) @@ -330,7 +201,7 @@ static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) static void omap_dm_timer_reset(struct omap_dm_timer *timer) { - u32 l; + int autoidle = 0, wakeup = 0; if (!cpu_class_is_omap2() || timer != &dm_timers[0]) { omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); @@ -338,28 +209,21 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) } omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG); - l |= 0x02 << 3; /* Set to smart-idle mode */ - l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ - /* Enable autoidle on OMAP2 / OMAP3 */ if (cpu_is_omap24xx() || cpu_is_omap34xx()) - l |= 0x1 << 0; + autoidle = 1; /* * Enable wake-up on OMAP2 CPUs. */ if (cpu_class_is_omap2()) - l |= 1 << 2; - omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); + wakeup = 1; - /* Match hardware reset default of posted mode */ - omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, - OMAP_TIMER_CTRL_POSTED); + __omap_dm_timer_reset(timer->io_base, autoidle, wakeup); timer->posted = 1; } -static void omap_dm_timer_prepare(struct omap_dm_timer *timer) +void omap_dm_timer_prepare(struct omap_dm_timer *timer) { omap_dm_timer_enable(timer); omap_dm_timer_reset(timer); @@ -531,25 +395,13 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start); void omap_dm_timer_stop(struct omap_dm_timer *timer) { - u32 l; + unsigned long rate = 0; - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - if (l & OMAP_TIMER_CTRL_ST) { - l &= ~0x1; - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); #ifdef CONFIG_ARCH_OMAP2PLUS - /* Readback to make sure write has completed */ - omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - /* - * Wait for functional clock period x 3.5 to make sure that - * timer is stopped - */ - udelay(3500000 / clk_get_rate(timer->fclk) + 1); + rate = clk_get_rate(timer->fclk); #endif - } - /* Ack possibly pending interrupt */ - omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, - OMAP_TIMER_INT_OVERFLOW); + + __omap_dm_timer_stop(timer->io_base, timer->posted, rate); } EXPORT_SYMBOL_GPL(omap_dm_timer_stop); @@ -572,22 +424,11 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { - int ret = -EINVAL; - if (source < 0 || source >= 3) return -EINVAL; - clk_disable(timer->fclk); - ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); - clk_enable(timer->fclk); - - /* - * When the functional clock disappears, too quick writes seem - * to cause an abort. XXX Is this still necessary? - */ - __delay(300000); - - return ret; + return __omap_dm_timer_set_source(timer->fclk, + dm_source_clocks[source]); } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); @@ -625,8 +466,7 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, } l |= OMAP_TIMER_CTRL_ST; - omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load); - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); + __omap_dm_timer_load_start(timer->io_base, l, load, timer->posted); } EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start); @@ -679,8 +519,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler); void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); - omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value); + __omap_dm_timer_int_enable(timer->io_base, value); } EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable); @@ -696,17 +535,13 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_read_status); void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value); + __omap_dm_timer_write_status(timer->io_base, value); } EXPORT_SYMBOL_GPL(omap_dm_timer_write_status); unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) { - unsigned int l; - - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); - - return l; + return __omap_dm_timer_read_counter(timer->io_base, timer->posted); } EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter); @@ -737,7 +572,7 @@ int omap_dm_timers_active(void) } EXPORT_SYMBOL_GPL(omap_dm_timers_active); -int __init omap_dm_timer_init(void) +static int __init omap_dm_timer_init(void) { struct omap_dm_timer *timer; int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ @@ -790,8 +625,16 @@ int __init omap_dm_timer_init(void) sprintf(clk_name, "gpt%d_fck", i + 1); timer->fclk = clk_get(NULL, clk_name); } + + /* One or two timers may be set up early for sys_timer */ + if (sys_timer_reserved & (1 << i)) { + timer->reserved = 1; + timer->posted = 1; + } #endif } return 0; } + +arch_initcall(omap_dm_timer_init); diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 5288130be96e..4564cc697d7f 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -34,7 +34,11 @@ struct sys_timer; extern void omap_map_common_io(void); -extern struct sys_timer omap_timer; +extern struct sys_timer omap1_timer; +extern struct sys_timer omap2_timer; +extern struct sys_timer omap3_timer; +extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap4_timer; extern bool omap_32k_timer_init(void); extern int __init omap_init_clocksource_32k(void); extern unsigned long long notrace omap_32k_sched_clock(void); diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index d6c70d2f4030..d0f3a2d22fd3 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -32,6 +32,9 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/clk.h> +#include <linux/delay.h> + #ifndef __ASM_ARCH_DMTIMER_H #define __ASM_ARCH_DMTIMER_H @@ -56,12 +59,8 @@ */ #define OMAP_TIMER_IP_VERSION_1 0x1 struct omap_dm_timer; -extern struct omap_dm_timer *gptimer_wakeup; -extern struct sys_timer omap_timer; struct clk; -int omap_dm_timer_init(void); - struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); void omap_dm_timer_free(struct omap_dm_timer *timer); @@ -93,5 +92,248 @@ void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value int omap_dm_timers_active(void); +/* + * Do not use the defines below, they are not needed. They should be only + * used by dmtimer.c and sys_timer related code. + */ + +/* register offsets */ +#define _OMAP_TIMER_ID_OFFSET 0x00 +#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10 +#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14 +#define _OMAP_TIMER_STAT_OFFSET 0x18 +#define _OMAP_TIMER_INT_EN_OFFSET 0x1c +#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 +#define _OMAP_TIMER_CTRL_OFFSET 0x24 +#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) +#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) +#define OMAP_TIMER_CTRL_PT (1 << 12) +#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) +#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) +#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) +#define OMAP_TIMER_CTRL_SCPWM (1 << 7) +#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ +#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ +#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ +#define OMAP_TIMER_CTRL_POSTED (1 << 2) +#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ +#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ +#define _OMAP_TIMER_COUNTER_OFFSET 0x28 +#define _OMAP_TIMER_LOAD_OFFSET 0x2c +#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 +#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 +#define WP_NONE 0 /* no write pending bit */ +#define WP_TCLR (1 << 0) +#define WP_TCRR (1 << 1) +#define WP_TLDR (1 << 2) +#define WP_TTGR (1 << 3) +#define WP_TMAR (1 << 4) +#define WP_TPIR (1 << 5) +#define WP_TNIR (1 << 6) +#define WP_TCVR (1 << 7) +#define WP_TOCR (1 << 8) +#define WP_TOWR (1 << 9) +#define _OMAP_TIMER_MATCH_OFFSET 0x38 +#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c +#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 +#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ +#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ +#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ +#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ + +/* register offsets with the write pending bit encoded */ +#define WPSHIFT 16 + +#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \ + | (WP_TCLR << WPSHIFT)) + +#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \ + | (WP_TCRR << WPSHIFT)) + +#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \ + | (WP_TLDR << WPSHIFT)) + +#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \ + | (WP_TTGR << WPSHIFT)) + +#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \ + | (WP_TMAR << WPSHIFT)) + +#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \ + | (WP_TPIR << WPSHIFT)) + +#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \ + | (WP_TNIR << WPSHIFT)) + +#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \ + | (WP_TCVR << WPSHIFT)) + +#define OMAP_TIMER_TICK_INT_MASK_SET_REG \ + (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT)) + +#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ + (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) + +struct omap_dm_timer { + unsigned long phys_base; + int irq; +#ifdef CONFIG_ARCH_OMAP2PLUS + struct clk *iclk, *fclk; +#endif + void __iomem *io_base; + unsigned long rate; + unsigned reserved:1; + unsigned enabled:1; + unsigned posted:1; +}; + +extern u32 sys_timer_reserved; +void omap_dm_timer_prepare(struct omap_dm_timer *timer); + +static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg, + int posted) +{ + if (posted) + while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) + & (reg >> WPSHIFT)) + cpu_relax(); + + return __raw_readl(base + (reg & 0xff)); +} + +static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val, + int posted) +{ + if (posted) + while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) + & (reg >> WPSHIFT)) + cpu_relax(); + + __raw_writel(val, base + (reg & 0xff)); +} + +/* Assumes the source clock has been set by caller */ +static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle, + int wakeup) +{ + u32 l; + + l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0); + l |= 0x02 << 3; /* Set to smart-idle mode */ + l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ + + if (autoidle) + l |= 0x1 << 0; + + if (wakeup) + l |= 1 << 2; + + __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0); + + /* Match hardware reset default of posted mode */ + __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG, + OMAP_TIMER_CTRL_POSTED, 0); +} + +static inline int __omap_dm_timer_set_source(struct clk *timer_fck, + struct clk *parent) +{ + int ret; + + clk_disable(timer_fck); + ret = clk_set_parent(timer_fck, parent); + clk_enable(timer_fck); + + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ + __delay(300000); + + return ret; +} + +static inline void __omap_dm_timer_stop(void __iomem *base, int posted, + unsigned long rate) +{ + u32 l; + + l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); + if (l & OMAP_TIMER_CTRL_ST) { + l &= ~0x1; + __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted); +#ifdef CONFIG_ARCH_OMAP2PLUS + /* Readback to make sure write has completed */ + __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); + /* + * Wait for functional clock period x 3.5 to make sure that + * timer is stopped + */ + udelay(3500000 / rate + 1); +#endif + } + + /* Ack possibly pending interrupt */ + __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, + OMAP_TIMER_INT_OVERFLOW, 0); +} + +static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl, + unsigned int load, int posted) +{ + __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted); + __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted); +} + +static inline void __omap_dm_timer_int_enable(void __iomem *base, + unsigned int value) +{ + __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0); + __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0); +} + +static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base, + int posted) +{ + return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted); +} + +static inline void __omap_dm_timer_write_status(void __iomem *base, + unsigned int value) +{ + __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0); +} #endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 5a25098ea7ea..c88432005665 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,7 +428,11 @@ #define INTCPS_NR_IRQS 96 #ifndef __ASSEMBLY__ -extern void omap_init_irq(void); +extern void __iomem *omap_irq_base; +void omap1_init_irq(void); +void omap2_init_irq(void); +void omap3_init_irq(void); +void ti816x_init_irq(void); extern int omap_irq_pending(void); void omap_intc_save_context(void); void omap_intc_restore_context(void); diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index f8f690ab2997..6c5350832407 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -24,7 +24,6 @@ #ifndef __ASM_ARCH_OMAP_MCBSP_H #define __ASM_ARCH_OMAP_MCBSP_H -#include <linux/completion.h> #include <linux/spinlock.h> #include <mach/hardware.h> @@ -340,10 +339,6 @@ typedef enum { OMAP_MCBSP5 } omap_mcbsp_id; -typedef int __bitwise omap_mcbsp_io_type_t; -#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1) -#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2) - typedef enum { OMAP_MCBSP_WORD_8 = 0, OMAP_MCBSP_WORD_12, @@ -353,38 +348,6 @@ typedef enum { OMAP_MCBSP_WORD_32, } omap_mcbsp_word_length; -typedef enum { - OMAP_MCBSP_CLK_RISING = 0, - OMAP_MCBSP_CLK_FALLING, -} omap_mcbsp_clk_polarity; - -typedef enum { - OMAP_MCBSP_FS_ACTIVE_HIGH = 0, - OMAP_MCBSP_FS_ACTIVE_LOW, -} omap_mcbsp_fs_polarity; - -typedef enum { - OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, - OMAP_MCBSP_CLK_STP_MODE_DELAY, -} omap_mcbsp_clk_stp_mode; - - -/******* SPI specific mode **********/ -typedef enum { - OMAP_MCBSP_SPI_MASTER = 0, - OMAP_MCBSP_SPI_SLAVE, -} omap_mcbsp_spi_mode; - -struct omap_mcbsp_spi_cfg { - omap_mcbsp_spi_mode spi_mode; - omap_mcbsp_clk_polarity rx_clock_polarity; - omap_mcbsp_clk_polarity tx_clock_polarity; - omap_mcbsp_fs_polarity fsx_polarity; - u8 clk_div; - omap_mcbsp_clk_stp_mode clk_stp_mode; - omap_mcbsp_word_length word_length; -}; - /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); @@ -425,22 +388,12 @@ struct omap_mcbsp { omap_mcbsp_word_length rx_word_length; omap_mcbsp_word_length tx_word_length; - omap_mcbsp_io_type_t io_type; /* IRQ or poll */ - /* IRQ based TX/RX */ int rx_irq; int tx_irq; /* DMA stuff */ u8 dma_rx_sync; - short dma_rx_lch; u8 dma_tx_sync; - short dma_tx_lch; - - /* Completion queues */ - struct completion tx_irq_completion; - struct completion rx_irq_completion; - struct completion tx_dma_completion; - struct completion rx_dma_completion; /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; @@ -499,24 +452,9 @@ int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); void omap_mcbsp_stop(unsigned int id, int tx, int rx); -void omap_mcbsp_xmit_word(unsigned int id, u32 word); -u32 omap_mcbsp_recv_word(unsigned int id); - -int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); - /* McBSP functional clock source changing function */ extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); -/* SPI specific API */ -void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); - -/* Polled read/write functions */ -int omap_mcbsp_pollread(unsigned int id, u16 * buf); -int omap_mcbsp_pollwrite(unsigned int id, u16 buf); -int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); /* McBSP signal muxing API */ void omap2_mcbsp1_mux_clkr_src(u8 mux); diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index d86d1ecf0068..67fc5060183e 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -19,15 +19,11 @@ enum nand_io { }; struct omap_nand_platform_data { - unsigned int options; int cs; - int gpio_irq; struct mtd_partition *parts; struct gpmc_timings *gpmc_t; int nr_parts; - int (*nand_setup)(void); - int (*dev_ready)(struct omap_nand_platform_data *); - int dma_channel; + bool dev_ready; int gpmc_irq; enum nand_io xfer_type; unsigned long phys_base; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 5587acf0eb2c..455eadcd820c 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -16,8 +16,6 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/platform_device.h> -#include <linux/wait.h> -#include <linux/completion.h> #include <linux/interrupt.h> #include <linux/err.h> #include <linux/clk.h> @@ -25,7 +23,6 @@ #include <linux/io.h> #include <linux/slab.h> -#include <plat/dma.h> #include <plat/mcbsp.h> #include <plat/omap_device.h> #include <linux/pm_runtime.h> @@ -136,8 +133,6 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) irqst_spcr2); /* Writing zero to XSYNC_ERR clears the IRQ */ MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2)); - } else { - complete(&mcbsp_tx->tx_irq_completion); } return IRQ_HANDLED; @@ -156,41 +151,11 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) irqst_spcr1); /* Writing zero to RSYNC_ERR clears the IRQ */ MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1)); - } else { - complete(&mcbsp_rx->rx_irq_completion); } return IRQ_HANDLED; } -static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) -{ - struct omap_mcbsp *mcbsp_dma_tx = data; - - dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n", - MCBSP_READ(mcbsp_dma_tx, SPCR2)); - - /* We can free the channels */ - omap_free_dma(mcbsp_dma_tx->dma_tx_lch); - mcbsp_dma_tx->dma_tx_lch = -1; - - complete(&mcbsp_dma_tx->tx_dma_completion); -} - -static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) -{ - struct omap_mcbsp *mcbsp_dma_rx = data; - - dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n", - MCBSP_READ(mcbsp_dma_rx, SPCR2)); - - /* We can free the channels */ - omap_free_dma(mcbsp_dma_rx->dma_rx_lch); - mcbsp_dma_rx->dma_rx_lch = -1; - - complete(&mcbsp_dma_rx->rx_dma_completion); -} - /* * omap_mcbsp_config simply write a config to the * appropriate McBSP. @@ -758,37 +723,6 @@ static inline void omap_st_start(struct omap_mcbsp *mcbsp) {} static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {} #endif -/* - * We can choose between IRQ based or polled IO. - * This needs to be called before omap_mcbsp_request(). - */ -int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - spin_lock(&mcbsp->lock); - - if (!mcbsp->free) { - dev_err(mcbsp->dev, "McBSP%d is currently in use\n", - mcbsp->id); - spin_unlock(&mcbsp->lock); - return -EINVAL; - } - - mcbsp->io_type = io_type; - - spin_unlock(&mcbsp->lock); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_set_io_type); - int omap_mcbsp_request(unsigned int id) { struct omap_mcbsp *mcbsp; @@ -833,29 +767,24 @@ int omap_mcbsp_request(unsigned int id) MCBSP_WRITE(mcbsp, SPCR1, 0); MCBSP_WRITE(mcbsp, SPCR2, 0); - if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { - /* We need to get IRQs here */ - init_completion(&mcbsp->tx_irq_completion); - err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, - 0, "McBSP", (void *)mcbsp); + err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, + 0, "McBSP", (void *)mcbsp); + if (err != 0) { + dev_err(mcbsp->dev, "Unable to request TX IRQ %d " + "for McBSP%d\n", mcbsp->tx_irq, + mcbsp->id); + goto err_clk_disable; + } + + if (mcbsp->rx_irq) { + err = request_irq(mcbsp->rx_irq, + omap_mcbsp_rx_irq_handler, + 0, "McBSP", (void *)mcbsp); if (err != 0) { - dev_err(mcbsp->dev, "Unable to request TX IRQ %d " - "for McBSP%d\n", mcbsp->tx_irq, + dev_err(mcbsp->dev, "Unable to request RX IRQ %d " + "for McBSP%d\n", mcbsp->rx_irq, mcbsp->id); - goto err_clk_disable; - } - - if (mcbsp->rx_irq) { - init_completion(&mcbsp->rx_irq_completion); - err = request_irq(mcbsp->rx_irq, - omap_mcbsp_rx_irq_handler, - 0, "McBSP", (void *)mcbsp); - if (err != 0) { - dev_err(mcbsp->dev, "Unable to request RX IRQ %d " - "for McBSP%d\n", mcbsp->rx_irq, - mcbsp->id); - goto err_free_irq; - } + goto err_free_irq; } } @@ -901,12 +830,9 @@ void omap_mcbsp_free(unsigned int id) pm_runtime_put_sync(mcbsp->dev); - if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { - /* Free IRQs */ - if (mcbsp->rx_irq) - free_irq(mcbsp->rx_irq, (void *)mcbsp); - free_irq(mcbsp->tx_irq, (void *)mcbsp); - } + if (mcbsp->rx_irq) + free_irq(mcbsp->rx_irq, (void *)mcbsp); + free_irq(mcbsp->tx_irq, (void *)mcbsp); reg_cache = mcbsp->reg_cache; @@ -1043,485 +969,6 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) } EXPORT_SYMBOL(omap_mcbsp_stop); -/* polled mcbsp i/o operations */ -int omap_mcbsp_pollwrite(unsigned int id, u16 buf) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - - MCBSP_WRITE(mcbsp, DXR1, buf); - /* if frame sync error - clear the error */ - if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) { - /* clear error */ - MCBSP_WRITE(mcbsp, SPCR2, MCBSP_READ_CACHE(mcbsp, SPCR2)); - /* resend */ - return -1; - } else { - /* wait for transmit confirmation */ - int attemps = 0; - while (!(MCBSP_READ(mcbsp, SPCR2) & XRDY)) { - if (attemps++ > 1000) { - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & - (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | - (XRST)); - udelay(10); - dev_err(mcbsp->dev, "Could not write to" - " McBSP%d Register\n", mcbsp->id); - return -2; - } - } - } - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_pollwrite); - -int omap_mcbsp_pollread(unsigned int id, u16 *buf) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - /* if frame sync error - clear the error */ - if (MCBSP_READ(mcbsp, SPCR1) & RSYNC_ERR) { - /* clear error */ - MCBSP_WRITE(mcbsp, SPCR1, MCBSP_READ_CACHE(mcbsp, SPCR1)); - /* resend */ - return -1; - } else { - /* wait for receive confirmation */ - int attemps = 0; - while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) { - if (attemps++ > 1000) { - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & - (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | - (RRST)); - udelay(10); - dev_err(mcbsp->dev, "Could not read from" - " McBSP%d Register\n", mcbsp->id); - return -2; - } - } - } - *buf = MCBSP_READ(mcbsp, DRR1); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_pollread); - -/* - * IRQ based word transmission. - */ -void omap_mcbsp_xmit_word(unsigned int id, u32 word) -{ - struct omap_mcbsp *mcbsp; - omap_mcbsp_word_length word_length; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - - mcbsp = id_to_mcbsp_ptr(id); - word_length = mcbsp->tx_word_length; - - wait_for_completion(&mcbsp->tx_irq_completion); - - if (word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, word >> 16); - MCBSP_WRITE(mcbsp, DXR1, word & 0xffff); -} -EXPORT_SYMBOL(omap_mcbsp_xmit_word); - -u32 omap_mcbsp_recv_word(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - u16 word_lsb, word_msb = 0; - omap_mcbsp_word_length word_length; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - word_length = mcbsp->rx_word_length; - - wait_for_completion(&mcbsp->rx_irq_completion); - - if (word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - return (word_lsb | (word_msb << 16)); -} -EXPORT_SYMBOL(omap_mcbsp_recv_word); - -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) -{ - struct omap_mcbsp *mcbsp; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_word_length rx_word_length; - u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - tx_word_length = mcbsp->tx_word_length; - rx_word_length = mcbsp->rx_word_length; - - if (tx_word_length != rx_word_length) - return -EINVAL; - - /* First we wait for the transmitter to be ready */ - spcr2 = MCBSP_READ(mcbsp, SPCR2); - while (!(spcr2 & XRDY)) { - spcr2 = MCBSP_READ(mcbsp, SPCR2); - if (attempts++ > 1000) { - /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d transmitter not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Now we can push the data */ - if (tx_word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, word >> 16); - MCBSP_WRITE(mcbsp, DXR1, word & 0xffff); - - /* We wait for the receiver to be ready */ - spcr1 = MCBSP_READ(mcbsp, SPCR1); - while (!(spcr1 & RRDY)) { - spcr1 = MCBSP_READ(mcbsp, SPCR1); - if (attempts++ > 1000) { - /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d receiver not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Receiver is ready, let's read the dummy data */ - if (rx_word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); - -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) -{ - struct omap_mcbsp *mcbsp; - u32 clock_word = 0; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_word_length rx_word_length; - u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - - tx_word_length = mcbsp->tx_word_length; - rx_word_length = mcbsp->rx_word_length; - - if (tx_word_length != rx_word_length) - return -EINVAL; - - /* First we wait for the transmitter to be ready */ - spcr2 = MCBSP_READ(mcbsp, SPCR2); - while (!(spcr2 & XRDY)) { - spcr2 = MCBSP_READ(mcbsp, SPCR2); - if (attempts++ > 1000) { - /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d transmitter not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* We first need to enable the bus clock */ - if (tx_word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, clock_word >> 16); - MCBSP_WRITE(mcbsp, DXR1, clock_word & 0xffff); - - /* We wait for the receiver to be ready */ - spcr1 = MCBSP_READ(mcbsp, SPCR1); - while (!(spcr1 & RRDY)) { - spcr1 = MCBSP_READ(mcbsp, SPCR1); - if (attempts++ > 1000) { - /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d receiver not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Receiver is ready, there is something for us */ - if (rx_word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - word[0] = (word_lsb | (word_msb << 16)); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); - -/* - * Simple DMA based buffer rx/tx routines. - * Nothing fancy, just a single buffer tx/rx through DMA. - * The DMA resources are released once the transfer is done. - * For anything fancier, you should use your own customized DMA - * routines and callbacks. - */ -int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, - unsigned int length) -{ - struct omap_mcbsp *mcbsp; - int dma_tx_ch; - int src_port = 0; - int dest_port = 0; - int sync_dev = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX", - omap_mcbsp_tx_dma_callback, - mcbsp, - &dma_tx_ch)) { - dev_err(mcbsp->dev, " Unable to request DMA channel for " - "McBSP%d TX. Trying IRQ based TX\n", - mcbsp->id); - return -EAGAIN; - } - mcbsp->dma_tx_lch = dma_tx_ch; - - dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id, - dma_tx_ch); - - init_completion(&mcbsp->tx_dma_completion); - - if (cpu_class_is_omap1()) { - src_port = OMAP_DMA_PORT_TIPB; - dest_port = OMAP_DMA_PORT_EMIFF; - } - if (cpu_class_is_omap2()) - sync_dev = mcbsp->dma_tx_sync; - - omap_set_dma_transfer_params(mcbsp->dma_tx_lch, - OMAP_DMA_DATA_TYPE_S16, - length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT, - sync_dev, 0); - - omap_set_dma_dest_params(mcbsp->dma_tx_lch, - src_port, - OMAP_DMA_AMODE_CONSTANT, - mcbsp->phys_base + OMAP_MCBSP_REG_DXR1, - 0, 0); - - omap_set_dma_src_params(mcbsp->dma_tx_lch, - dest_port, - OMAP_DMA_AMODE_POST_INC, - buffer, - 0, 0); - - omap_start_dma(mcbsp->dma_tx_lch); - wait_for_completion(&mcbsp->tx_dma_completion); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); - -int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, - unsigned int length) -{ - struct omap_mcbsp *mcbsp; - int dma_rx_ch; - int src_port = 0; - int dest_port = 0; - int sync_dev = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX", - omap_mcbsp_rx_dma_callback, - mcbsp, - &dma_rx_ch)) { - dev_err(mcbsp->dev, "Unable to request DMA channel for " - "McBSP%d RX. Trying IRQ based RX\n", - mcbsp->id); - return -EAGAIN; - } - mcbsp->dma_rx_lch = dma_rx_ch; - - dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id, - dma_rx_ch); - - init_completion(&mcbsp->rx_dma_completion); - - if (cpu_class_is_omap1()) { - src_port = OMAP_DMA_PORT_TIPB; - dest_port = OMAP_DMA_PORT_EMIFF; - } - if (cpu_class_is_omap2()) - sync_dev = mcbsp->dma_rx_sync; - - omap_set_dma_transfer_params(mcbsp->dma_rx_lch, - OMAP_DMA_DATA_TYPE_S16, - length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT, - sync_dev, 0); - - omap_set_dma_src_params(mcbsp->dma_rx_lch, - src_port, - OMAP_DMA_AMODE_CONSTANT, - mcbsp->phys_base + OMAP_MCBSP_REG_DRR1, - 0, 0); - - omap_set_dma_dest_params(mcbsp->dma_rx_lch, - dest_port, - OMAP_DMA_AMODE_POST_INC, - buffer, - 0, 0); - - omap_start_dma(mcbsp->dma_rx_lch); - wait_for_completion(&mcbsp->rx_dma_completion); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_recv_buffer); - -/* - * SPI wrapper. - * Since SPI setup is much simpler than the generic McBSP one, - * this wrapper just need an omap_mcbsp_spi_cfg structure as an input. - * Once this is done, you can call omap_mcbsp_start(). - */ -void omap_mcbsp_set_spi_mode(unsigned int id, - const struct omap_mcbsp_spi_cfg *spi_cfg) -{ - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_reg_cfg mcbsp_cfg; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); - - /* SPI has only one frame */ - mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0)); - mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0)); - - /* Clock stop mode */ - if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY) - mcbsp_cfg.spcr1 |= (1 << 12); - else - mcbsp_cfg.spcr1 |= (3 << 11); - - /* Set clock parities */ - if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING) - mcbsp_cfg.pcr0 |= CLKRP; - else - mcbsp_cfg.pcr0 &= ~CLKRP; - - if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING) - mcbsp_cfg.pcr0 &= ~CLKXP; - else - mcbsp_cfg.pcr0 |= CLKXP; - - /* Set SCLKME to 0 and CLKSM to 1 */ - mcbsp_cfg.pcr0 &= ~SCLKME; - mcbsp_cfg.srgr2 |= CLKSM; - - /* Set FSXP */ - if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH) - mcbsp_cfg.pcr0 &= ~FSXP; - else - mcbsp_cfg.pcr0 |= FSXP; - - if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) { - mcbsp_cfg.pcr0 |= CLKXM; - mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1); - mcbsp_cfg.pcr0 |= FSXM; - mcbsp_cfg.srgr2 &= ~FSGM; - mcbsp_cfg.xcr2 |= XDATDLY(1); - mcbsp_cfg.rcr2 |= RDATDLY(1); - } else { - mcbsp_cfg.pcr0 &= ~CLKXM; - mcbsp_cfg.srgr1 |= CLKGDV(1); - mcbsp_cfg.pcr0 &= ~FSXM; - mcbsp_cfg.xcr2 &= ~XDATDLY(3); - mcbsp_cfg.rcr2 &= ~RDATDLY(3); - } - - mcbsp_cfg.xcr2 &= ~XPHASE; - mcbsp_cfg.rcr2 &= ~RPHASE; - - omap_mcbsp_config(id, &mcbsp_cfg); -} -EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); - #ifdef CONFIG_ARCH_OMAP3 #define max_thres(m) (mcbsp->pdata->buffer_size) #define valid_threshold(m, val) ((val) <= max_thres(m)) @@ -1833,8 +1280,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) spin_lock_init(&mcbsp->lock); mcbsp->id = id + 1; mcbsp->free = true; - mcbsp->dma_tx_lch = -1; - mcbsp->dma_rx_lch = -1; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); if (!res) { @@ -1860,9 +1305,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) else mcbsp->phys_dma_base = res->start; - /* Default I/O is IRQ based */ - mcbsp->io_type = OMAP_MCBSP_IRQ_IO; - mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx"); mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx"); |