diff options
Diffstat (limited to 'arch')
117 files changed, 22488 insertions, 8015 deletions
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig index 338267674075..1b39691b816f 100644 --- a/arch/arm/configs/htcherald_defconfig +++ b/arch/arm/configs/htcherald_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc6 -# Sat Nov 14 10:56:01 2009 +# Linux kernel version: 2.6.32-rc8 +# Sat Dec 5 12:16:24 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -198,7 +198,9 @@ CONFIG_ARCH_OMAP1=y # OMAP Feature Selections # # CONFIG_OMAP_RESET_CLOCKS is not set -# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MUX=y +# CONFIG_OMAP_MUX_DEBUG is not set +CONFIG_OMAP_MUX_WARNINGS=y CONFIG_OMAP_MCBSP=y # CONFIG_OMAP_MBOX_FWK is not set CONFIG_OMAP_MPU_TIMER=y @@ -207,6 +209,7 @@ CONFIG_OMAP_LL_DEBUG_UART1=y # CONFIG_OMAP_LL_DEBUG_UART2 is not set # CONFIG_OMAP_LL_DEBUG_UART3 is not set # CONFIG_OMAP_LL_DEBUG_NONE is not set +CONFIG_OMAP_SERIAL_WAKE=y # CONFIG_OMAP_PM_NONE is not set CONFIG_OMAP_PM_NOOP=y diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig new file mode 100644 index 000000000000..7c8515e65c02 --- /dev/null +++ b/arch/arm/configs/omap3_touchbook_defconfig @@ -0,0 +1,2431 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.32-rc8 +# Fri Dec 4 16:02:17 2009 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_OPROFILE_ARMV7=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +# CONFIG_RD_BZIP2 is not set +# CONFIG_RD_LZMA is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +# CONFIG_ELF_CORE is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_FREEZER=y + +# +# System Type +# +CONFIG_MMU=y +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_GEMINI is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_MMP is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_DAVINCI is not set +CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set + +# +# TI OMAP Implementations +# +CONFIG_ARCH_OMAP_OTG=y +# CONFIG_ARCH_OMAP1 is not set +# CONFIG_ARCH_OMAP2 is not set +CONFIG_ARCH_OMAP3=y +# CONFIG_ARCH_OMAP4 is not set + +# +# OMAP Feature Selections +# +# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set +# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set +CONFIG_OMAP_RESET_CLOCKS=y +# CONFIG_OMAP_MUX is not set +CONFIG_OMAP_MCBSP=y +# CONFIG_OMAP_MBOX_FWK is not set +# CONFIG_OMAP_MPU_TIMER is not set +CONFIG_OMAP_32K_TIMER=y +CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_DM_TIMER=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set +# CONFIG_OMAP_LL_DEBUG_UART2 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y +CONFIG_ARCH_OMAP34XX=y +CONFIG_ARCH_OMAP3430=y + +# +# OMAP Board Type +# +# CONFIG_MACH_OMAP3_BEAGLE is not set +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OVERO is not set +# CONFIG_MACH_OMAP3EVM is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3_PANDORA is not set +CONFIG_MACH_OMAP3_TOUCHBOOK=y +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_IGEP0020 is not set +# CONFIG_MACH_OMAP_3630SDP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_V7=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +# CONFIG_ARM_ERRATA_430973 is not set +# CONFIG_ARM_ERRATA_458693 is not set +# CONFIG_ARM_ERRATA_460075 is not set +CONFIG_COMMON_CLKDEV=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_LEDS=y +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE=" debug " +# CONFIG_XIP_KERNEL is not set +CONFIG_KEXEC=y +CONFIG_ATAGS_PROC=y + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_NEON=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=y + +# +# Power management options +# +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_VERBOSE is not set +CONFIG_CAN_PM_TRACE=y +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +# CONFIG_DEFAULT_BIC is not set +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y +CONFIG_IPV6_MROUTE=y +# CONFIG_IPV6_PIMSM_V2 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CT_ACCT=y +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CT_PROTO_DCCP=m +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=m +CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +# CONFIG_NETFILTER_TPROXY is not set +CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +CONFIG_NETFILTER_XT_TARGET_HL=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +CONFIG_IP_VS_DEBUG=y +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_DCCP=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_UDPLITE=m +CONFIG_NF_NAT_PROTO_SCTP=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_NF_NAT_SIP=m +CONFIG_IP_NF_MANGLE=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_CONNTRACK_IPV6=m +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_TARGET_HL=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +# CONFIG_BRIDGE_NF_EBTABLES is not set +CONFIG_IP_DCCP=m +CONFIG_INET_DCCP_DIAG=m + +# +# DCCP CCIDs Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP_CCID2_DEBUG is not set +CONFIG_IP_DCCP_CCID3=y +# CONFIG_IP_DCCP_CCID3_DEBUG is not set +CONFIG_IP_DCCP_CCID3_RTO=100 +CONFIG_IP_DCCP_TFRC_LIB=y + +# +# DCCP Kernel Hacking +# +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_RDS is not set +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +CONFIG_ATM_MPOA=m +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +CONFIG_WAN_ROUTER=m +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +CONFIG_BT=y +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=y +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=y + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=y +CONFIG_BT_HCIBTSDIO=y +CONFIG_BT_HCIUART=y +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_LL=y +CONFIG_BT_HCIBCM203X=y +CONFIG_BT_HCIBPA10X=y +CONFIG_BT_HCIBFUSB=y +# CONFIG_BT_HCIVHCI is not set +# CONFIG_BT_MRVL is not set +CONFIG_AF_RXRPC=m +# CONFIG_AF_RXRPC_DEBUG is not set +# CONFIG_RXKAD is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +CONFIG_CFG80211_DEFAULT_PS_VALUE=1 +# CONFIG_CFG80211_DEBUGFS is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_RC_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_WIMAX=m +CONFIG_WIMAX_DEBUG_LEVEL=8 +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_PREFETCH=y +# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_BLK_DEV_XIP is not set +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MG_DISK is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +CONFIG_EEPROM_93CX6=y +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_ISCSI_ATTRS=m +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID6_PQ=m +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_DEBUG is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +# CONFIG_DM_LOG_USERSPACE is not set +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +# CONFIG_DM_MULTIPATH_QL is not set +# CONFIG_DM_MULTIPATH_ST is not set +CONFIG_DM_DELAY=m +# CONFIG_DM_UEVENT is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +CONFIG_MACVLAN=m +CONFIG_EQUALIZER=m +CONFIG_TUN=m +CONFIG_VETH=m +# CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_WLAN=y +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +# CONFIG_AT76C50X_USB is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_IWM is not set + +# +# WiMAX Wireless Broadband devices +# +# CONFIG_WIMAX_I2400M_USB is not set +# CONFIG_WIMAX_I2400M_SDIO is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_ATM_DRIVERS is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOATM is not set +CONFIG_PPPOL2TP=m +# CONFIG_SLIP is not set +CONFIG_SLHC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=y +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TWL4030 is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879_I2C is not set +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_W90X900 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_TWL4030_PWRBUTTON=y +CONFIG_INPUT_UINPUT=y +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_HW_RANDOM_TIMERIOMEM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_GPIO is not set +CONFIG_SPI_OMAP24XX=y + +# +# SPI Protocol Masters +# +CONFIG_SPI_SPIDEV=y +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +CONFIG_GPIO_TWL4030=y + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +CONFIG_BATTERY_BQ27x00=y +# CONFIG_BATTERY_MAX17040 is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +CONFIG_THERMAL=y +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_OMAP_WATCHDOG=y +# CONFIG_TWL4030_WATCHDOG is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +CONFIG_TWL4030_CORE=y +# CONFIG_TWL4030_POWER is not set +# CONFIG_TWL4030_CODEC is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +CONFIG_REGULATOR_TWL4030=y +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_FB_OMAP is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_HWDEP=y +CONFIG_SND_RAWMIDI=y +CONFIG_SND_JACK=y +CONFIG_SND_SEQUENCER=m +# CONFIG_SND_SEQ_DUMMY is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_RAWMIDI_SEQ=m +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_DRIVERS=y +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_VIRMIDI is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=y +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_SOC=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_WACOM is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_OXU210HP_HCD=y +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# OMAP 343x high speed USB support +# +# CONFIG_USB_MUSB_HOST is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y +# CONFIG_MUSB_PIO_ONLY is not set +CONFIG_USB_INVENTRA_DMA=y +# CONFIG_USB_TI_CPPI_DMA is not set +# CONFIG_USB_MUSB_DEBUG is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP210X is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_FUNSOFT=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MOTOROLA=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +# CONFIG_USB_SERIAL_QUALCOMM is not set +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_HP4X=m +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_SIEMENS_MPI=m +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +# CONFIG_USB_SERIAL_SYMBOL is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_ATM is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_DEBUG_FS=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ZERO_HNPTEST=y +# CONFIG_USB_AUDIO is not set +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m +CONFIG_USB_MIDI_GADGET=m +CONFIG_USB_G_PRINTER=m +CONFIG_USB_CDC_COMPOSITE=m + +# +# OTG and related infrastructure +# +CONFIG_USB_OTG_UTILS=y +CONFIG_USB_GPIO_VBUS=y +# CONFIG_ISP1301_OMAP is not set +CONFIG_TWL4030_USB=y +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_OMAP is not set +CONFIG_MMC_OMAP_HS=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_GPIO is not set +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +CONFIG_RTC_DRV_TWL4030=y +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +CONFIG_UIO=m +CONFIG_UIO_PDRV=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set + +# +# TI VLYNQ +# +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_W35UND is not set +# CONFIG_PRISM2_USB is not set +# CONFIG_ECHO is not set +# CONFIG_OTUS is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_INPUT_GPIO is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_LINE6_USB is not set +# CONFIG_USB_SERIAL_QUATECH2 is not set +# CONFIG_USB_SERIAL_QUATECH_USB2 is not set +# CONFIG_VT6656 is not set +# CONFIG_FB_UDL is not set + +# +# RAR Register Driver +# +# CONFIG_RAR_REGISTER is not set +# CONFIG_IIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +# CONFIG_REISERFS_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS_SECURITY is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_XFS_FS=m +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +# CONFIG_AUTOFS_FS is not set +CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=y +# CONFIG_CUSE is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +# CONFIG_JFFS2_CMODE_PRIORITY is not set +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_JFFS2_CMODE_FAVOURLZO=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_V4_1 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +CONFIG_CIFS_STATS=y +CONFIG_CIFS_STATS2=y +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set +CONFIG_CIFS_EXPERIMENTAL=y +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_KMEMLEAK is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_ENABLE_DEFAULT_TRACERS is not set +# CONFIG_BOOT_TRACER is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_RING_BUFFER_BENCHMARK is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +CONFIG_KEYS=y +# CONFIG_KEYS_DEBUG_PROC_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_HW=y +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig index a464ca332a23..2319113c86bf 100644 --- a/arch/arm/configs/omap_4430sdp_defconfig +++ b/arch/arm/configs/omap_4430sdp_defconfig @@ -1,26 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30-rc7 -# Tue Jun 9 12:36:23 2009 +# Linux kernel version: 2.6.32 +# Sun Dec 6 23:37:45 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_LOCKBREAK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # # General setup @@ -39,11 +42,12 @@ CONFIG_BSD_PROCESS_ACCT=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 CONFIG_GROUP_SCHED=y @@ -52,8 +56,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -# CONFIG_SYSFS_DEPRECATED=y is not set -# CONFIG_SYSFS_DEPRECATED_V2=y is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -70,7 +73,6 @@ CONFIG_UID16=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y @@ -83,6 +85,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y CONFIG_COMPAT_BRK=y @@ -90,13 +96,16 @@ CONFIG_COMPAT_BRK=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y + +# +# GCOV-based kernel profiling +# # CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y @@ -110,7 +119,7 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -131,6 +140,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set @@ -142,8 +152,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -166,10 +178,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5PC1XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_U300 is not set # CONFIG_ARCH_DAVINCI is not set CONFIG_ARCH_OMAP=y +# CONFIG_ARCH_BCMRING is not set # # TI OMAP Implementations @@ -190,9 +205,12 @@ CONFIG_ARCH_OMAP4=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y -CONFIG_OMAP_LL_DEBUG_UART1=y +# CONFIG_OMAP_LL_DEBUG_UART1 is not set # CONFIG_OMAP_LL_DEBUG_UART2 is not set -# CONFIG_OMAP_LL_DEBUG_UART3 is not set +CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_LL_DEBUG_NONE is not set +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y # # OMAP Board Type @@ -207,7 +225,7 @@ CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -222,9 +240,10 @@ CONFIG_CPU_CP15_MMU=y # CONFIG_ARM_THUMB is not set # CONFIG_ARM_THUMBEE is not set # CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_DCACHE_DISABLE=y +# CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=5 # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set @@ -245,18 +264,20 @@ CONFIG_ARM_GIC=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_NR_CPUS=2 # CONFIG_HOTPLUG_CPU is not set -CONFIG_LOCAL_TIMERS=y -# CONFIG_PREEMPT is not set +# CONFIG_LOCAL_TIMERS is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y CONFIG_HZ=128 +# CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set +CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set @@ -271,10 +292,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -# CONFIG_UNEVICTABLE_LRU is not set CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y +# CONFIG_UACCESS_WITH_MEMCPY is not set # # Boot options @@ -298,9 +322,11 @@ CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600 # # At least one emulation must be selected # +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set CONFIG_VFP=y CONFIG_VFPv3=y -# CONFIG_NEON is not set +CONFIG_NEON=y # # Userspace binary formats @@ -325,6 +351,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -342,6 +369,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_MG_DISK is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -355,6 +383,7 @@ CONFIG_HAVE_IDE=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_PHONE is not set # # Input device support @@ -427,6 +456,11 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -447,11 +481,14 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -472,21 +509,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -CONFIG_DAB=y +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support @@ -511,14 +535,17 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -535,9 +562,12 @@ CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set -CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -601,7 +631,6 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # # Partition Types @@ -673,23 +702,24 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_DETECT_SOFTLOCKUP=y -# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set -CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +# CONFIG_DETECT_SOFTLOCKUP is not set CONFIG_DETECT_HUNG_TASK=y # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 -CONFIG_SCHED_DEBUG=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -708,31 +738,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y - -# -# Tracers -# -# CONFIG_FUNCTION_TRACER is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_EVENT_TRACER is not set -# CONFIG_BOOT_TRACER is not set -# CONFIG_TRACE_BRANCH_PROFILING is not set -# CONFIG_STACK_TRACER is not set -# CONFIG_KMEMTRACE is not set -# CONFIG_WORKQUEUE_TRACER is not set -# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE is not set +# CONFIG_BRANCH_PROFILE_NONE is not set +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_PROFILE_ALL_BRANCHES is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -754,7 +775,6 @@ CONFIG_CRYPTO=y # # Crypto core or helper # -# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y @@ -796,11 +816,13 @@ CONFIG_CRYPTO_PCBC=m # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index eef93627fb13..4b00a4306812 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -610,7 +610,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index f0e7d0f85582..0d7e37a3651b 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -629,7 +629,8 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_TWL4030=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 87e539aa8ad9..9ce17f13d3f1 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,8 @@ # # Common support -obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o +obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o +obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -17,6 +18,9 @@ obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o mailbox_mach-objs := mailbox.o +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + led-y := leds.o # Specific board support @@ -48,3 +52,7 @@ led-$(CONFIG_MACH_OMAP_INNOVATOR) += leds-innovator.o led-$(CONFIG_MACH_OMAP_PERSEUS2) += leds-h2p2-debug.o led-$(CONFIG_MACH_OMAP_OSK) += leds-osk.o obj-$(CONFIG_LEDS) += $(led-y) + +ifneq ($(CONFIG_FB_OMAP),) +obj-y += lcd_dma.o +endif diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index f4b72c1654f5..7e70c3c08da6 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -19,6 +19,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -30,7 +31,6 @@ #include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> -#include <plat/nand.h> #include <plat/keypad.h> #include <plat/common.h> #include <plat/board.h> @@ -100,6 +100,12 @@ static int fsample_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -167,8 +173,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define FSAMPLE_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -178,7 +216,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -190,6 +228,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -233,13 +274,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config fsample_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -250,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = { static void __init omap_fsample_init(void) { - if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) + if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 89ba8ec4bbf4..fa7cecea19f9 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -28,6 +28,7 @@ #include <linux/mtd/partitions.h> #include <linux/input.h> #include <linux/i2c/tps65010.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/gpio.h> @@ -40,7 +41,6 @@ #include <plat/mux.h> #include <plat/dma.h> #include <plat/tc.h> -#include <plat/nand.h> #include <plat/irda.h> #include <plat/usb.h> #include <plat/keypad.h> @@ -179,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data h2_nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = h2_nand_partitions, - .nr_parts = ARRAY_SIZE(h2_nand_partitions), +static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H2_NAND_RB_GPIO_PIN 62 + +static int h2_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H2_NAND_RB_GPIO_PIN); +} + +static const char *h2_part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data h2_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(h2_nand_partitions), + .partitions = h2_nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = h2_part_probes, + }, + .ctrl = { + .cmd_ctrl = h2_nand_cmd_ctl, + .dev_ready = h2_nand_dev_ready, + + }, }; static struct resource h2_nand_resource = { @@ -191,15 +223,21 @@ static struct resource h2_nand_resource = { }; static struct platform_device h2_nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &h2_nand_data, + .platform_data = &h2_nand_platdata, }, .num_resources = 1, .resource = &h2_nand_resource, }; +static struct smc91x_platdata h2_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource h2_smc91x_resources[] = { [0] = { .start = OMAP1610_ETHR_START, /* Physical */ @@ -216,6 +254,9 @@ static struct resource h2_smc91x_resources[] = { static struct platform_device h2_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &h2_smc91x_info, + }, .num_resources = ARRAY_SIZE(h2_smc91x_resources), .resource = h2_smc91x_resources, }; @@ -368,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { { OMAP_TAG_LCD, &h2_lcd_config }, }; -#define H2_NAND_RB_GPIO_PIN 62 - static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index f5cc0a730524..6a7f9c391cf1 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -28,6 +28,7 @@ #include <linux/input.h> #include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> +#include <linux/smc91x.h> #include <asm/setup.h> #include <asm/page.h> @@ -42,7 +43,6 @@ #include <mach/irqs.h> #include <plat/mux.h> #include <plat/tc.h> -#include <plat/nand.h> #include <plat/usb.h> #include <plat/keypad.h> #include <plat/dma.h> @@ -181,11 +181,43 @@ static struct mtd_partition nand_partitions[] = { }, }; -/* dip switches control NAND chip access: 8 bit, 16 bit, or neither */ -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, - .parts = nand_partitions, - .nr_parts = ARRAY_SIZE(nand_partitions), +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define H3_NAND_RB_GPIO_PIN 10 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(H3_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +struct platform_nand_data nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(nand_partitions), + .partitions = nand_partitions, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + + }, }; static struct resource nand_resource = { @@ -193,15 +225,21 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { - .platform_data = &nand_data, + .platform_data = &nand_platdata, }, .num_resources = 1, .resource = &nand_resource, }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = OMAP1710_ETHR_START, /* Physical */ @@ -218,6 +256,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -332,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -#define H3_NAND_RB_GPIO_PIN 10 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(H3_NAND_RB_GPIO_PIN); -} - static void __init h3_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped @@ -356,7 +390,7 @@ static void __init h3_init(void) nand_resource.end += SZ_4K - 1; if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(H3_NAND_RB_GPIO_PIN); /* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */ /* GPIO10 pullup/down register, Enable pullup on GPIO10 */ diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 5f28a5ceacac..e36639f66150 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -39,6 +39,7 @@ #include <plat/common.h> #include <plat/board.h> #include <plat/keypad.h> +#include <plat/usb.h> #include <mach/irqs.h> @@ -140,6 +141,15 @@ static struct platform_device kp_device = { .resource = kp_resources, }; +/* USB Device */ +static struct omap_usb_config htcherald_usb_config __initdata = { + .otg = 0, + .register_host = 0, + .register_dev = 1, + .hmc_mode = 4, + .pins[0] = 2, +}; + /* LCD Device resources */ static struct platform_device lcd_device = { .name = "lcd_htcherald", @@ -214,6 +224,57 @@ static void __init htcherald_disable_watchdog(void) } } +#define HTCHERALD_GPIO_USB_EN1 33 +#define HTCHERALD_GPIO_USB_EN2 73 +#define HTCHERALD_GPIO_USB_DM 35 +#define HTCHERALD_GPIO_USB_DP 36 + +static void __init htcherald_usb_enable(void) +{ + unsigned int tries = 20; + unsigned int value = 0; + + /* Request the GPIOs we need to control here */ + if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0) + goto err1; + + if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0) + goto err2; + + if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0) + goto err3; + + if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0) + goto err4; + + /* force USB_EN GPIO to 0 */ + do { + /* output low */ + gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0); + } while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 && + --tries); + + if (value == 1) + printk(KERN_WARNING "Unable to reset USB, trying to continue\n"); + + gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */ + gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */ + gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */ + + goto done; + +err4: + gpio_free(HTCHERALD_GPIO_USB_DM); +err3: + gpio_free(HTCHERALD_GPIO_USB_EN2); +err2: + gpio_free(HTCHERALD_GPIO_USB_EN1); +err1: + printk(KERN_ERR "Unabled to request GPIO for USB\n"); +done: + printk(KERN_INFO "USB setup complete.\n"); +} + static void __init htcherald_init(void) { printk(KERN_INFO "HTC Herald init.\n"); @@ -225,6 +286,9 @@ static void __init htcherald_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); htcherald_disable_watchdog(); + + htcherald_usb_enable(); + omap_usb_init(&htcherald_usb_config); } static void __init htcherald_init_irq(void) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index cf0fdb9c182f..2133b006f6a3 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -23,6 +23,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -142,6 +143,11 @@ static struct platform_device innovator_kp_device = { .resource = innovator_kp_resources, }; +static struct smc91x_platdata innovator_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; #ifdef CONFIG_ARCH_OMAP15XX @@ -175,6 +181,9 @@ static struct resource innovator1510_smc91x_resources[] = { static struct platform_device innovator1510_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1510_smc91x_resources), .resource = innovator1510_smc91x_resources, }; @@ -241,6 +250,9 @@ static struct resource innovator1610_smc91x_resources[] = { static struct platform_device innovator1610_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &innovator_smc91x_info, + }, .num_resources = ARRAY_SIZE(innovator1610_smc91x_resources), .resource = innovator1610_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 50c92c13e48a..ccea4f448e9a 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -33,6 +33,7 @@ #include <linux/irq.h> #include <linux/i2c.h> #include <linux/leds.h> +#include <linux/smc91x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> @@ -115,6 +116,12 @@ static struct platform_device osk5912_flash_device = { .resource = &osk_flash_resource, }; +static struct smc91x_platdata osk5912_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource osk5912_smc91x_resources[] = { [0] = { .start = OMAP_OSK_ETHR_START, /* Physical */ @@ -131,6 +138,9 @@ static struct resource osk5912_smc91x_resources[] = { static struct platform_device osk5912_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &osk5912_smc91x_info, + }, .num_resources = ARRAY_SIZE(osk5912_smc91x_resources), .resource = osk5912_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index ca7df1e93efc..1387a4f15da9 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -19,6 +19,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/input.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -30,7 +31,6 @@ #include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> -#include <plat/nand.h> #include <plat/keypad.h> #include <plat/common.h> #include <plat/board.h> @@ -67,6 +67,12 @@ static int p2_keymap[] = { 0 }; +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */ @@ -134,8 +140,40 @@ static struct platform_device nor_device = { .resource = &nor_resource, }; -static struct omap_nand_platform_data nand_data = { - .options = NAND_SAMSUNG_LP_OPTIONS, +static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long mask; + + if (cmd == NAND_CMD_NONE) + return; + + mask = (ctrl & NAND_CLE) ? 0x02 : 0; + if (ctrl & NAND_ALE) + mask |= 0x04; + writeb(cmd, (unsigned long)this->IO_ADDR_W | mask); +} + +#define P2_NAND_RB_GPIO_PIN 62 + +static int nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(P2_NAND_RB_GPIO_PIN); +} + +static const char *part_probes[] = { "cmdlinepart", NULL }; + +static struct platform_nand_data nand_data = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .options = NAND_SAMSUNG_LP_OPTIONS, + .part_probe_types = part_probes, + }, + .ctrl = { + .cmd_ctrl = nand_cmd_ctl, + .dev_ready = nand_dev_ready, + }, }; static struct resource nand_resource = { @@ -145,7 +183,7 @@ static struct resource nand_resource = { }; static struct platform_device nand_device = { - .name = "omapnand", + .name = "gen_nand", .id = 0, .dev = { .platform_data = &nand_data, @@ -157,6 +195,9 @@ static struct platform_device nand_device = { static struct platform_device smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; @@ -201,13 +242,6 @@ static struct platform_device *devices[] __initdata = { &lcd_device, }; -#define P2_NAND_RB_GPIO_PIN 62 - -static int nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(P2_NAND_RB_GPIO_PIN); -} - static struct omap_lcd_config perseus2_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -220,7 +254,7 @@ static void __init omap_perseus2_init(void) { if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0) BUG(); - nand_data.dev_ready = nand_dev_ready; + gpio_direction_input(P2_NAND_RB_GPIO_PIN); omap_cfg_reg(L3_1610_FLASH_CS2B_OE); omap_cfg_reg(M8_1610_FLASH_CS2B_WE); diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 35c75c1bd0aa..169183537997 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -22,6 +22,7 @@ #include <linux/reboot.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -106,6 +107,12 @@ static struct platform_device voiceblue_flash_device = { .resource = &voiceblue_flash_resource, }; +static struct smc91x_platdata voiceblue_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource voiceblue_smc91x_resources[] = { [0] = { .start = OMAP_CS2_PHYS + 0x300, @@ -122,6 +129,9 @@ static struct resource voiceblue_smc91x_resources[] = { static struct platform_device voiceblue_smc91x_device = { .name = "smc91x", .id = 0, + .dev = { + .platform_data = &voiceblue_smc91x_info, + }, .num_resources = ARRAY_SIZE(voiceblue_smc91x_resources), .resource = voiceblue_smc91x_resources, }; diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 42cbe203da36..2ba9ab953731 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock.c * - * Copyright (C) 2004 - 2005 Nokia corporation + * Copyright (C) 2004 - 2005, 2009 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * * Modified to use omap shared clock framework by @@ -26,12 +26,17 @@ #include <plat/usb.h> #include <plat/clock.h> #include <plat/sram.h> - -static const struct clkops clkops_generic; -static const struct clkops clkops_uart; -static const struct clkops clkops_dspck; +#include <plat/clkdev_omap.h> #include "clock.h" +#include "opp.h" + +__u32 arm_idlect1_mask; +struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; + +/*------------------------------------------------------------------------- + * Omap1 specific clock functions + *-------------------------------------------------------------------------*/ static int clk_omap1_dummy_enable(struct clk *clk) { @@ -42,134 +47,24 @@ static void clk_omap1_dummy_disable(struct clk *clk) { } -static const struct clkops clkops_dummy = { - .enable = clk_omap1_dummy_enable, - .disable = clk_omap1_dummy_disable, -}; - -static struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_dummy, - .flags = RATE_FIXED, -}; - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; +const struct clkops clkops_dummy = { + .enable = clk_omap1_dummy_enable, + .disable = clk_omap1_dummy_disable, }; -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_310 (1 << 0) -#define CK_7XX (1 << 1) -#define CK_1510 (1 << 2) -#define CK_16XX (1 << 3) - -static struct omap_clk omap_clks[] = { - /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), - /* CK_GEN1 clocks */ - CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), - CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), - CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), - CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), - CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), - /* CK_GEN2 clocks */ - CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), - /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), - CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), - CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), - CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), - CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), - CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), - CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), - CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), - /* ULPD clocks */ - CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), - CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), - CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), - CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), - CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), - CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), - CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), - CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), - CLK(NULL, "mclk", &mclk_16xx, CK_16XX), - CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), - CLK(NULL, "bclk", &bclk_16xx, CK_16XX), - CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), - CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), - CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), - CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), - /* Virtual clocks */ - CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310), - CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), - CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), - CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), - CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), - CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), - CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), -}; - -static int omap1_clk_enable_generic(struct clk * clk); -static int omap1_clk_enable(struct clk *clk); -static void omap1_clk_disable_generic(struct clk * clk); -static void omap1_clk_disable(struct clk *clk); - -__u32 arm_idlect1_mask; - -/*------------------------------------------------------------------------- - * Omap1 specific clock functions - *-------------------------------------------------------------------------*/ - -static unsigned long omap1_watchdog_recalc(struct clk *clk) +/* XXX can be replaced with a fixed_divisor_recalc */ +unsigned long omap1_watchdog_recalc(struct clk *clk) { return clk->parent->rate / 14; } -static unsigned long omap1_uart_recalc(struct clk *clk) +unsigned long omap1_uart_recalc(struct clk *clk) { unsigned int val = __raw_readl(clk->enable_reg); return val & clk->enable_bit ? 48000000 : 12000000; } -static unsigned long omap1_sossi_recalc(struct clk *clk) +unsigned long omap1_sossi_recalc(struct clk *clk) { u32 div = omap_readl(MOD_CONF_CTRL_1); @@ -179,64 +74,6 @@ static unsigned long omap1_sossi_recalc(struct clk *clk) return clk->parent->rate / div; } -static int omap1_clk_enable_dsp_domain(struct clk *clk) -{ - int retval; - - retval = omap1_clk_enable(&api_ck.clk); - if (!retval) { - retval = omap1_clk_enable_generic(clk); - omap1_clk_disable(&api_ck.clk); - } - - return retval; -} - -static void omap1_clk_disable_dsp_domain(struct clk *clk) -{ - if (omap1_clk_enable(&api_ck.clk) == 0) { - omap1_clk_disable_generic(clk); - omap1_clk_disable(&api_ck.clk); - } -} - -static const struct clkops clkops_dspck = { - .enable = &omap1_clk_enable_dsp_domain, - .disable = &omap1_clk_disable_dsp_domain, -}; - -static int omap1_clk_enable_uart_functional(struct clk *clk) -{ - int ret; - struct uart_clk *uclk; - - ret = omap1_clk_enable_generic(clk); - if (ret == 0) { - /* Set smart idle acknowledgement mode */ - uclk = (struct uart_clk *)clk; - omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, - uclk->sysc_addr); - } - - return ret; -} - -static void omap1_clk_disable_uart_functional(struct clk *clk) -{ - struct uart_clk *uclk; - - /* Set force idle acknowledgement mode */ - uclk = (struct uart_clk *)clk; - omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); - - omap1_clk_disable_generic(clk); -} - -static const struct clkops clkops_uart = { - .enable = &omap1_clk_enable_uart_functional, - .disable = &omap1_clk_disable_uart_functional, -}; - static void omap1_clk_allow_idle(struct clk *clk) { struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk; @@ -344,7 +181,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate) return dsor_exp; } -static unsigned long omap1_ckctl_recalc(struct clk *clk) +unsigned long omap1_ckctl_recalc(struct clk *clk) { /* Calculate divisor encoded as 2-bit exponent */ int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset)); @@ -352,7 +189,7 @@ static unsigned long omap1_ckctl_recalc(struct clk *clk) return clk->parent->rate / dsor; } -static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) +unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) { int dsor; @@ -363,28 +200,29 @@ static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk) * Note that DSP_CKCTL virt addr = phys addr, so * we must use __raw_readw() instead of omap_readw(). */ - omap1_clk_enable(&api_ck.clk); + omap1_clk_enable(api_ck_p); dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset)); - omap1_clk_disable(&api_ck.clk); + omap1_clk_disable(api_ck_p); return clk->parent->rate / dsor; } /* MPU virtual clock functions */ -static int omap1_select_table_rate(struct clk * clk, unsigned long rate) +int omap1_select_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate and switch to it */ struct mpu_rate * ptr; + unsigned long dpll1_rate, ref_rate; - if (clk != &virtual_ck_mpu) - return -EINVAL; + dpll1_rate = clk_get_rate(ck_dpll1_p); + ref_rate = clk_get_rate(ck_ref_p); - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) + for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ref_rate) continue; /* DPLL1 cannot be reprogrammed without risking system crash */ - if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate) + if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate) continue; /* Can check only after xtal frequency check */ @@ -405,11 +243,13 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) else omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); - ck_dpll1.rate = ptr->pll_rate; + /* XXX Do we need to recalculate the tree below DPLL1 at this point? */ + ck_dpll1_p->rate = ptr->pll_rate; + return 0; } -static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) { int dsor_exp; u16 regval; @@ -429,7 +269,7 @@ static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate) return 0; } -static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) +long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) { int dsor_exp = calc_dsor_exp(clk, rate); if (dsor_exp < 0) @@ -439,7 +279,7 @@ static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate) return clk->parent->rate / (1 << dsor_exp); } -static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) { int dsor_exp; u16 regval; @@ -459,19 +299,19 @@ static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate) return 0; } -static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate) +long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) { /* Find the highest supported frequency <= rate */ struct mpu_rate * ptr; - long highest_rate; + long highest_rate; + unsigned long ref_rate; - if (clk != &virtual_ck_mpu) - return -EINVAL; + ref_rate = clk_get_rate(ck_ref_p); highest_rate = -EINVAL; - for (ptr = rate_table; ptr->rate; ptr++) { - if (ptr->xtal != ck_ref.rate) + for (ptr = omap1_rate_table; ptr->rate; ptr++) { + if (ptr->xtal != ref_rate) continue; highest_rate = ptr->rate; @@ -506,8 +346,8 @@ static unsigned calc_ext_dsor(unsigned long rate) return dsor; } -/* Only needed on 1510 */ -static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) +/* XXX Only needed on 1510 */ +int omap1_set_uart_rate(struct clk *clk, unsigned long rate) { unsigned int val; @@ -525,7 +365,7 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate) } /* External clock (MCLK & BCLK) functions */ -static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) +int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate) { unsigned dsor; __u16 ratio_bits; @@ -543,7 +383,7 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate) return 0; } -static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) +int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) { u32 l; int div; @@ -566,12 +406,12 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate) return 0; } -static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate) +long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate) { return 96000000 / calc_ext_dsor(rate); } -static void omap1_init_ext_clk(struct clk * clk) +void omap1_init_ext_clk(struct clk *clk) { unsigned dsor; __u16 ratio_bits; @@ -589,7 +429,7 @@ static void omap1_init_ext_clk(struct clk * clk) clk-> rate = 96000000 / dsor; } -static int omap1_clk_enable(struct clk *clk) +int omap1_clk_enable(struct clk *clk) { int ret = 0; @@ -617,7 +457,7 @@ err: return ret; } -static void omap1_clk_disable(struct clk *clk) +void omap1_clk_disable(struct clk *clk) { if (clk->usecount > 0 && !(--clk->usecount)) { clk->ops->disable(clk); @@ -672,12 +512,70 @@ static void omap1_clk_disable_generic(struct clk *clk) } } -static const struct clkops clkops_generic = { - .enable = &omap1_clk_enable_generic, - .disable = &omap1_clk_disable_generic, +const struct clkops clkops_generic = { + .enable = omap1_clk_enable_generic, + .disable = omap1_clk_disable_generic, +}; + +static int omap1_clk_enable_dsp_domain(struct clk *clk) +{ + int retval; + + retval = omap1_clk_enable(api_ck_p); + if (!retval) { + retval = omap1_clk_enable_generic(clk); + omap1_clk_disable(api_ck_p); + } + + return retval; +} + +static void omap1_clk_disable_dsp_domain(struct clk *clk) +{ + if (omap1_clk_enable(api_ck_p) == 0) { + omap1_clk_disable_generic(clk); + omap1_clk_disable(api_ck_p); + } +} + +const struct clkops clkops_dspck = { + .enable = omap1_clk_enable_dsp_domain, + .disable = omap1_clk_disable_dsp_domain, +}; + +static int omap1_clk_enable_uart_functional(struct clk *clk) +{ + int ret; + struct uart_clk *uclk; + + ret = omap1_clk_enable_generic(clk); + if (ret == 0) { + /* Set smart idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8, + uclk->sysc_addr); + } + + return ret; +} + +static void omap1_clk_disable_uart_functional(struct clk *clk) +{ + struct uart_clk *uclk; + + /* Set force idle acknowledgement mode */ + uclk = (struct uart_clk *)clk; + omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr); + + omap1_clk_disable_generic(clk); +} + +const struct clkops clkops_uart = { + .enable = omap1_clk_enable_uart_functional, + .disable = omap1_clk_disable_uart_functional, }; -static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) +long omap1_clk_round_rate(struct clk *clk, unsigned long rate) { if (clk->flags & RATE_FIXED) return clk->rate; @@ -688,7 +586,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate) return clk->rate; } -static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) +int omap1_clk_set_rate(struct clk *clk, unsigned long rate) { int ret = -EINVAL; @@ -703,7 +601,7 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate) #ifdef CONFIG_OMAP_RESET_CLOCKS -static void __init omap1_clk_disable_unused(struct clk *clk) +void __init omap1_clk_disable_unused(struct clk *clk) { __u32 regval32; @@ -724,184 +622,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk) if ((regval32 & (1 << clk->enable_bit)) == 0) return; - /* FIXME: This clock seems to be necessary but no-one - * has asked for its activation. */ - if (clk == &tc2_ck /* FIX: pm.c (SRAM), CCP, Camera */ - || clk == &ck_dpll1out.clk /* FIX: SoSSI, SSR */ - || clk == &arm_gpio_ck /* FIX: GPIO code for 1510 */ - ) { - printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n", - clk->name); - return; - } - printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name); clk->ops->disable(clk); printk(" done\n"); } -#else -#define omap1_clk_disable_unused NULL #endif - -static struct clk_functions omap1_clk_functions = { - .clk_enable = omap1_clk_enable, - .clk_disable = omap1_clk_disable, - .clk_round_rate = omap1_clk_round_rate, - .clk_set_rate = omap1_clk_set_rate, - .clk_disable_unused = omap1_clk_disable_unused, -}; - -int __init omap1_clk_init(void) -{ - struct omap_clk *c; - const struct omap_clock_config *info; - int crystal_type = 0; /* Default 12 MHz */ - u32 reg, cpu_mask; - -#ifdef CONFIG_DEBUG_LL - /* Resets some clocks that may be left on from bootloader, - * but leaves serial clocks on. - */ - omap_writel(0x3 << 29, MOD_CONF_CTRL_0); -#endif - - /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ - reg = omap_readw(SOFT_REQ_REG) & (1 << 4); - omap_writew(reg, SOFT_REQ_REG); - if (!cpu_is_omap15xx()) - omap_writew(0, SOFT_REQ_REG2); - - clk_init(&omap1_clk_functions); - - /* By default all idlect1 clocks are allowed to idle */ - arm_idlect1_mask = ~0; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - clk_preinit(c->lk.clk); - - cpu_mask = 0; - if (cpu_is_omap16xx()) - cpu_mask |= CK_16XX; - if (cpu_is_omap1510()) - cpu_mask |= CK_1510; - if (cpu_is_omap7xx()) - cpu_mask |= CK_7XX; - if (cpu_is_omap310()) - cpu_mask |= CK_310; - - for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - } - - info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); - if (info != NULL) { - if (!cpu_is_omap15xx()) - crystal_type = info->system_clock_type; - } - -#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) - ck_ref.rate = 13000000; -#elif defined(CONFIG_ARCH_OMAP16XX) - if (crystal_type == 2) - ck_ref.rate = 19200000; -#endif - - printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n", - omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), - omap_readw(ARM_CKCTL)); - - /* We want to be in syncronous scalable mode */ - omap_writew(0x1000, ARM_SYSST); - -#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER - /* Use values set by bootloader. Determine PLL rate and recalculate - * dependent clocks as if kernel had changed PLL or divisors. - */ - { - unsigned pll_ctl_val = omap_readw(DPLL_CTL); - - ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ - if (pll_ctl_val & 0x10) { - /* PLL enabled, apply multiplier and divisor */ - if (pll_ctl_val & 0xf80) - ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; - ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; - } else { - /* PLL disabled, apply bypass divisor */ - switch (pll_ctl_val & 0xc) { - case 0: - break; - case 0x4: - ck_dpll1.rate /= 2; - break; - default: - ck_dpll1.rate /= 4; - break; - } - } - } -#else - /* Find the highest supported frequency and enable it */ - if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { - printk(KERN_ERR "System frequencies not set. Check your config.\n"); - /* Guess sane values (60MHz) */ - omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); - ck_dpll1.rate = 60000000; - } -#endif - propagate_rate(&ck_dpll1); - /* Cache rates for clocks connected to ck_ref (not dpll1) */ - propagate_rate(&ck_ref); - printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " - "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", - ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, - ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, - arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); - -#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) - /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); -#endif - - /* Amstrad Delta wants BCLK high when inactive */ - if (machine_is_ams_delta()) - omap_writel(omap_readl(ULPD_CLOCK_CTRL) | - (1 << SDW_MCLK_INV_BIT), - ULPD_CLOCK_CTRL); - - /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ - /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap7xx()) - omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); - else - omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); - - /* Put DSP/MPUI into reset until needed */ - omap_writew(0, ARM_RSTCT1); - omap_writew(1, ARM_RSTCT2); - omap_writew(0x400, ARM_IDLECT1); - - /* - * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) - * of the ARM_IDLECT2 register must be set to zero. The power-on - * default value of this bit is one. - */ - omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable(&armper_ck.clk); - clk_enable(&armxor_ck.clk); - clk_enable(&armtim_ck.clk); /* This should be done by timer code */ - - if (cpu_is_omap15xx()) - clk_enable(&arm_gpio_ck); - - return 0; -} diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h index 29ffa97dc7f3..a4190afb8614 100644 --- a/arch/arm/mach-omap1/clock.h +++ b/arch/arm/mach-omap1/clock.h @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock.h * - * Copyright (C) 2004 - 2005 Nokia corporation + * Copyright (C) 2004 - 2005, 2009 Nokia corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc * @@ -13,30 +13,36 @@ #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H #define __ARCH_ARM_MACH_OMAP1_CLOCK_H -static unsigned long omap1_ckctl_recalc(struct clk *clk); -static unsigned long omap1_watchdog_recalc(struct clk *clk); -static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); -static unsigned long omap1_sossi_recalc(struct clk *clk); -static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); -static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate); -static int omap1_set_uart_rate(struct clk * clk, unsigned long rate); -static unsigned long omap1_uart_recalc(struct clk *clk); -static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate); -static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate); -static void omap1_init_ext_clk(struct clk * clk); -static int omap1_select_table_rate(struct clk * clk, unsigned long rate); -static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate); - -static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); -static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); - -struct mpu_rate { - unsigned long rate; - unsigned long xtal; - unsigned long pll_rate; - __u16 ckctl_val; - __u16 dpllctl_val; -}; +#include <linux/clk.h> + +#include <plat/clock.h> + +extern int __init omap1_clk_init(void); +extern int omap1_clk_enable(struct clk *clk); +extern void omap1_clk_disable(struct clk *clk); +extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_ckctl_recalc(struct clk *clk); +extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_sossi_recalc(struct clk *clk); +extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk); +extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate); +extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate); +extern unsigned long omap1_uart_recalc(struct clk *clk); +extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate); +extern void omap1_init_ext_clk(struct clk *clk); +extern int omap1_select_table_rate(struct clk *clk, unsigned long rate); +extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate); +extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate); +extern unsigned long omap1_watchdog_recalc(struct clk *clk); + +#ifdef CONFIG_OMAP_RESET_CLOCKS +extern void __init omap1_clk_disable_unused(struct clk *clk); +#else +#define omap1_clk_disable_unused NULL +#endif struct uart_clk { struct clk clk; @@ -96,596 +102,12 @@ struct arm_idlect1_clk { #define SOFT_REQ_REG 0xfffe0834 #define SOFT_REQ_REG2 0xfffe0880 -/*------------------------------------------------------------------------- - * Omap1 MPU rate table - *-------------------------------------------------------------------------*/ -static struct mpu_rate rate_table[] = { - /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL - * NOTE: Comment order here is different from bits in CKCTL value: - * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv - */ -#if defined(CONFIG_OMAP_ARM_216MHZ) - { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_195MHZ) - { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_192MHZ) - { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ - { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ - { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ - { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ - { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_182MHZ) - { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_168MHZ) - { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ -#endif -#if defined(CONFIG_OMAP_ARM_150MHZ) - { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_120MHZ) - { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ -#endif -#if defined(CONFIG_OMAP_ARM_96MHZ) - { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_60MHZ) - { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ -#endif -#if defined(CONFIG_OMAP_ARM_30MHZ) - { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ -#endif - { 0, 0, 0, 0, 0 }, -}; - -/*------------------------------------------------------------------------- - * Omap1 clocks - *-------------------------------------------------------------------------*/ - -static struct clk ck_ref = { - .name = "ck_ref", - .ops = &clkops_null, - .rate = 12000000, -}; - -static struct clk ck_dpll1 = { - .name = "ck_dpll1", - .ops = &clkops_null, - .parent = &ck_ref, -}; - -static struct arm_idlect1_clk ck_dpll1out = { - .clk = { - .name = "ck_dpll1out", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_CKOUT_ARM, - .recalc = &followparent_recalc, - }, - .idlect_shift = 12, -}; - -static struct clk sossi_ck = { - .name = "ck_sossi", - .ops = &clkops_generic, - .parent = &ck_dpll1out.clk, - .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), - .enable_bit = 16, - .recalc = &omap1_sossi_recalc, - .set_rate = &omap1_set_sossi_rate, -}; - -static struct clk arm_ck = { - .name = "arm_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_ARMDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk armper_ck = { - .clk = { - .name = "armper_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 2, -}; - -static struct clk arm_gpio_ck = { - .name = "arm_gpio_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_GPIOCK, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk armxor_ck = { - .clk = { - .name = "armxor_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 1, -}; - -static struct arm_idlect1_clk armtim_ck = { - .clk = { - .name = "armtim_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_TIMCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 9, -}; - -static struct arm_idlect1_clk armwdt_ck = { - .clk = { - .name = "armwdt_ck", - .ops = &clkops_generic, - .parent = &ck_ref, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_WDTCK, - .recalc = &omap1_watchdog_recalc, - }, - .idlect_shift = 0, -}; - -static struct clk arminth_ck16xx = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &arm_ck, - .recalc = &followparent_recalc, - /* Note: On 16xx the frequency can be divided by 2 by programming - * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 - * - * 1510 version is in TC clocks. - */ -}; - -static struct clk dsp_ck = { - .name = "dsp_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), - .enable_bit = EN_DSPCK, - .rate_offset = CKCTL_DSPDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspmmu_ck = { - .name = "dspmmu_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .rate_offset = CKCTL_DSPMMUDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct clk dspper_ck = { - .name = "dspper_ck", - .ops = &clkops_dspck, - .parent = &ck_dpll1, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_PERCK, - .rate_offset = CKCTL_PERDIV_OFFSET, - .recalc = &omap1_ckctl_recalc_dsp_domain, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = &omap1_clk_set_rate_dsp_domain, -}; - -static struct clk dspxor_ck = { - .name = "dspxor_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_XORPCK, - .recalc = &followparent_recalc, -}; - -static struct clk dsptim_ck = { - .name = "dsptim_ck", - .ops = &clkops_dspck, - .parent = &ck_ref, - .enable_reg = DSP_IDLECT2, - .enable_bit = EN_DSPTIMCK, - .recalc = &followparent_recalc, -}; - -/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ -static struct arm_idlect1_clk tc_ck = { - .clk = { - .name = "tc_ck", - .ops = &clkops_null, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .rate_offset = CKCTL_TCDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 6, -}; - -static struct clk arminth_ck1510 = { - .name = "arminth_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, - /* Note: On 1510 the frequency follows TC_CK - * - * 16xx version is in MPU clocks. - */ -}; - -static struct clk tipb_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "tipb_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk l3_ocpi_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "l3_ocpi_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_OCPI_CK, - .recalc = &followparent_recalc, -}; - -static struct clk tc1_ck = { - .name = "tc1_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC1_CK, - .recalc = &followparent_recalc, -}; +extern __u32 arm_idlect1_mask; +extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; -static struct clk tc2_ck = { - .name = "tc2_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), - .enable_bit = EN_TC2_CK, - .recalc = &followparent_recalc, -}; - -static struct clk dma_ck = { - /* No-idle controlled by "tc_ck" */ - .name = "dma_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk dma_lcdfree_ck = { - .name = "dma_lcdfree_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct arm_idlect1_clk api_ck = { - .clk = { - .name = "api_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_APICK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 8, -}; - -static struct arm_idlect1_clk lb_ck = { - .clk = { - .name = "lb_ck", - .ops = &clkops_generic, - .parent = &tc_ck.clk, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LBCK, - .recalc = &followparent_recalc, - }, - .idlect_shift = 4, -}; - -static struct clk rhea1_ck = { - .name = "rhea1_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk rhea2_ck = { - .name = "rhea2_ck", - .ops = &clkops_null, - .parent = &tc_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk lcd_ck_16xx = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, -}; - -static struct arm_idlect1_clk lcd_ck_1510 = { - .clk = { - .name = "lcd_ck", - .ops = &clkops_generic, - .parent = &ck_dpll1, - .flags = CLOCK_IDLE_CONTROL, - .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), - .enable_bit = EN_LCDCK, - .rate_offset = CKCTL_LCDDIV_OFFSET, - .recalc = &omap1_ckctl_recalc, - .round_rate = omap1_clk_round_rate_ckctl_arm, - .set_rate = omap1_clk_set_rate_ckctl_arm, - }, - .idlect_shift = 3, -}; - -static struct clk uart1_1510 = { - .name = "uart1_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct uart_clk uart1_16xx = { - .clk = { - .name = "uart1_ck", - .ops = &clkops_uart, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 29, - }, - .sysc_addr = 0xfffb0054, -}; - -static struct clk uart2_ck = { - .name = "uart2_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct clk uart3_1510 = { - .name = "uart3_ck", - .ops = &clkops_null, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 12000000, - .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ - .set_rate = &omap1_set_uart_rate, - .recalc = &omap1_uart_recalc, -}; - -static struct uart_clk uart3_16xx = { - .clk = { - .name = "uart3_ck", - .ops = &clkops_uart, - /* Direct from ULPD, no real parent */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 31, - }, - .sysc_addr = 0xfffb9854, -}; - -static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ - .name = "usb_clko", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 6000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), - .enable_bit = USB_MCLK_EN_BIT, -}; - -static struct clk usb_hhc_ck1510 = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = USB_HOST_HHC_UHOST_EN, -}; - -static struct clk usb_hhc_ck16xx = { - .name = "usb_hhc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, - .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ - .enable_bit = 8 /* UHOST_EN */, -}; - -static struct clk usb_dc_ck = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 4, -}; - -static struct clk usb_dc_ck7xx = { - .name = "usb_dc_ck", - .ops = &clkops_generic, - /* Direct from ULPD, no parent */ - .rate = 48000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 8, -}; - -static struct clk mclk_1510 = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = RATE_FIXED, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 6, -}; - -static struct clk mclk_16xx = { - .name = "mclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), - .enable_bit = COM_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; - -static struct clk bclk_1510 = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .rate = 12000000, - .flags = RATE_FIXED, -}; - -static struct clk bclk_16xx = { - .name = "bclk", - .ops = &clkops_generic, - /* Direct from ULPD, no parent. May be enabled by ext hardware. */ - .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), - .enable_bit = SWD_ULPD_PLL_CLK_REQ, - .set_rate = &omap1_set_ext_clk_rate, - .round_rate = &omap1_round_ext_clk_rate, - .init = &omap1_init_ext_clk, -}; - -static struct clk mmc1_ck = { - .name = "mmc_ck", - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 23, -}; - -static struct clk mmc2_ck = { - .name = "mmc_ck", - .id = 1, - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), - .enable_bit = 20, -}; - -static struct clk mmc3_ck = { - .name = "mmc_ck", - .id = 2, - .ops = &clkops_generic, - /* Functional clock is direct from ULPD, interface clock is ARMPER */ - .parent = &armper_ck.clk, - .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, - .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), - .enable_bit = 12, -}; - -static struct clk virtual_ck_mpu = { - .name = "mpu", - .ops = &clkops_null, - .parent = &arm_ck, /* Is smarter alias for */ - .recalc = &followparent_recalc, - .set_rate = &omap1_select_table_rate, - .round_rate = &omap1_round_to_table_rate, -}; - -/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK -remains active during MPU idle whenever this is enabled */ -static struct clk i2c_fck = { - .name = "i2c_fck", - .id = 1, - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armxor_ck.clk, - .recalc = &followparent_recalc, -}; - -static struct clk i2c_ick = { - .name = "i2c_ick", - .id = 1, - .ops = &clkops_null, - .flags = CLOCK_NO_IDLE_PARENT, - .parent = &armper_ck.clk, - .recalc = &followparent_recalc, -}; +extern const struct clkops clkops_dspck; +extern const struct clkops clkops_dummy; +extern const struct clkops clkops_uart; +extern const struct clkops clkops_generic; #endif diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c new file mode 100644 index 000000000000..ab995a9c606c --- /dev/null +++ b/arch/arm/mach-omap1/clock_data.c @@ -0,0 +1,843 @@ +/* + * linux/arch/arm/mach-omap1/clock_data.c + * + * Copyright (C) 2004 - 2005, 2009 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <asm/mach-types.h> /* for machine_is_* */ + +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/clkdev_omap.h> +#include <plat/usb.h> /* for OTG_BASE */ + +#include "clock.h" + +/*------------------------------------------------------------------------ + * Omap1 clocks + *-------------------------------------------------------------------------*/ + +/* XXX is this necessary? */ +static struct clk dummy_ck = { + .name = "dummy", + .ops = &clkops_dummy, + .flags = RATE_FIXED, +}; + +static struct clk ck_ref = { + .name = "ck_ref", + .ops = &clkops_null, + .rate = 12000000, +}; + +static struct clk ck_dpll1 = { + .name = "ck_dpll1", + .ops = &clkops_null, + .parent = &ck_ref, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ FIX: SoSSI, SSR ] + */ +static struct arm_idlect1_clk ck_dpll1out = { + .clk = { + .name = "ck_dpll1out", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT | + ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_CKOUT_ARM, + .recalc = &followparent_recalc, + }, + .idlect_shift = 12, +}; + +static struct clk sossi_ck = { + .name = "ck_sossi", + .ops = &clkops_generic, + .parent = &ck_dpll1out.clk, + .flags = CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1), + .enable_bit = 16, + .recalc = &omap1_sossi_recalc, + .set_rate = &omap1_set_sossi_rate, +}; + +static struct clk arm_ck = { + .name = "arm_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_ARMDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk armper_ck = { + .clk = { + .name = "armper_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 2, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ GPIO code for 1510 ] + */ +static struct clk arm_gpio_ck = { + .name = "arm_gpio_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_GPIOCK, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk armxor_ck = { + .clk = { + .name = "armxor_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 1, +}; + +static struct arm_idlect1_clk armtim_ck = { + .clk = { + .name = "armtim_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_TIMCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 9, +}; + +static struct arm_idlect1_clk armwdt_ck = { + .clk = { + .name = "armwdt_ck", + .ops = &clkops_generic, + .parent = &ck_ref, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_WDTCK, + .recalc = &omap1_watchdog_recalc, + }, + .idlect_shift = 0, +}; + +static struct clk arminth_ck16xx = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &arm_ck, + .recalc = &followparent_recalc, + /* Note: On 16xx the frequency can be divided by 2 by programming + * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1 + * + * 1510 version is in TC clocks. + */ +}; + +static struct clk dsp_ck = { + .name = "dsp_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_CKCTL), + .enable_bit = EN_DSPCK, + .rate_offset = CKCTL_DSPDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspmmu_ck = { + .name = "dspmmu_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .rate_offset = CKCTL_DSPMMUDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct clk dspper_ck = { + .name = "dspper_ck", + .ops = &clkops_dspck, + .parent = &ck_dpll1, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_PERCK, + .rate_offset = CKCTL_PERDIV_OFFSET, + .recalc = &omap1_ckctl_recalc_dsp_domain, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = &omap1_clk_set_rate_dsp_domain, +}; + +static struct clk dspxor_ck = { + .name = "dspxor_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_XORPCK, + .recalc = &followparent_recalc, +}; + +static struct clk dsptim_ck = { + .name = "dsptim_ck", + .ops = &clkops_dspck, + .parent = &ck_ref, + .enable_reg = DSP_IDLECT2, + .enable_bit = EN_DSPTIMCK, + .recalc = &followparent_recalc, +}; + +/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */ +static struct arm_idlect1_clk tc_ck = { + .clk = { + .name = "tc_ck", + .ops = &clkops_null, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .rate_offset = CKCTL_TCDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 6, +}; + +static struct clk arminth_ck1510 = { + .name = "arminth_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, + /* Note: On 1510 the frequency follows TC_CK + * + * 16xx version is in MPU clocks. + */ +}; + +static struct clk tipb_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "tipb_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk l3_ocpi_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "l3_ocpi_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_OCPI_CK, + .recalc = &followparent_recalc, +}; + +static struct clk tc1_ck = { + .name = "tc1_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC1_CK, + .recalc = &followparent_recalc, +}; + +/* + * FIXME: This clock seems to be necessary but no-one has asked for its + * activation. [ pm.c (SRAM), CCP, Camera ] + */ +static struct clk tc2_ck = { + .name = "tc2_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = ENABLE_ON_INIT, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), + .enable_bit = EN_TC2_CK, + .recalc = &followparent_recalc, +}; + +static struct clk dma_ck = { + /* No-idle controlled by "tc_ck" */ + .name = "dma_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk dma_lcdfree_ck = { + .name = "dma_lcdfree_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct arm_idlect1_clk api_ck = { + .clk = { + .name = "api_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_APICK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 8, +}; + +static struct arm_idlect1_clk lb_ck = { + .clk = { + .name = "lb_ck", + .ops = &clkops_generic, + .parent = &tc_ck.clk, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LBCK, + .recalc = &followparent_recalc, + }, + .idlect_shift = 4, +}; + +static struct clk rhea1_ck = { + .name = "rhea1_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk rhea2_ck = { + .name = "rhea2_ck", + .ops = &clkops_null, + .parent = &tc_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk lcd_ck_16xx = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, +}; + +static struct arm_idlect1_clk lcd_ck_1510 = { + .clk = { + .name = "lcd_ck", + .ops = &clkops_generic, + .parent = &ck_dpll1, + .flags = CLOCK_IDLE_CONTROL, + .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), + .enable_bit = EN_LCDCK, + .rate_offset = CKCTL_LCDDIV_OFFSET, + .recalc = &omap1_ckctl_recalc, + .round_rate = omap1_clk_round_rate_ckctl_arm, + .set_rate = omap1_clk_set_rate_ckctl_arm, + }, + .idlect_shift = 3, +}; + +static struct clk uart1_1510 = { + .name = "uart1_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 29, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct uart_clk uart1_16xx = { + .clk = { + .name = "uart1_ck", + .ops = &clkops_uart, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 29, + }, + .sysc_addr = 0xfffb0054, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 30, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct clk uart3_1510 = { + .name = "uart3_ck", + .ops = &clkops_null, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 12000000, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 31, /* Chooses between 12MHz and 48MHz */ + .set_rate = &omap1_set_uart_rate, + .recalc = &omap1_uart_recalc, +}; + +static struct uart_clk uart3_16xx = { + .clk = { + .name = "uart3_ck", + .ops = &clkops_uart, + /* Direct from ULPD, no real parent */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | + CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 31, + }, + .sysc_addr = 0xfffb9854, +}; + +static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ + .name = "usb_clko", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 6000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), + .enable_bit = USB_MCLK_EN_BIT, +}; + +static struct clk usb_hhc_ck1510 = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = USB_HOST_HHC_UHOST_EN, +}; + +static struct clk usb_hhc_ck16xx = { + .name = "usb_hhc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ + .flags = RATE_FIXED | ENABLE_REG_32BIT, + .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ + .enable_bit = 8 /* UHOST_EN */, +}; + +static struct clk usb_dc_ck = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 4, +}; + +static struct clk usb_dc_ck7xx = { + .name = "usb_dc_ck", + .ops = &clkops_generic, + /* Direct from ULPD, no parent */ + .rate = 48000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 8, +}; + +static struct clk mclk_1510 = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = RATE_FIXED, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 6, +}; + +static struct clk mclk_16xx = { + .name = "mclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL), + .enable_bit = COM_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk bclk_1510 = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .rate = 12000000, + .flags = RATE_FIXED, +}; + +static struct clk bclk_16xx = { + .name = "bclk", + .ops = &clkops_generic, + /* Direct from ULPD, no parent. May be enabled by ext hardware. */ + .enable_reg = OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL), + .enable_bit = SWD_ULPD_PLL_CLK_REQ, + .set_rate = &omap1_set_ext_clk_rate, + .round_rate = &omap1_round_ext_clk_rate, + .init = &omap1_init_ext_clk, +}; + +static struct clk mmc1_ck = { + .name = "mmc_ck", + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 23, +}; + +static struct clk mmc2_ck = { + .name = "mmc_ck", + .id = 1, + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), + .enable_bit = 20, +}; + +static struct clk mmc3_ck = { + .name = "mmc_ck", + .id = 2, + .ops = &clkops_generic, + /* Functional clock is direct from ULPD, interface clock is ARMPER */ + .parent = &armper_ck.clk, + .rate = 48000000, + .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), + .enable_bit = 12, +}; + +static struct clk virtual_ck_mpu = { + .name = "mpu", + .ops = &clkops_null, + .parent = &arm_ck, /* Is smarter alias for */ + .recalc = &followparent_recalc, + .set_rate = &omap1_select_table_rate, + .round_rate = &omap1_round_to_table_rate, +}; + +/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK +remains active during MPU idle whenever this is enabled */ +static struct clk i2c_fck = { + .name = "i2c_fck", + .id = 1, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armxor_ck.clk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c_ick = { + .name = "i2c_ick", + .id = 1, + .ops = &clkops_null, + .flags = CLOCK_NO_IDLE_PARENT, + .parent = &armper_ck.clk, + .recalc = &followparent_recalc, +}; + +/* + * clkdev integration + */ + +static struct omap_clk omap_clks[] = { + /* non-ULPD clocks */ + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + /* CK_GEN1 clocks */ + CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), + CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), + CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), + CLK("omap_wdt", "ick", &dummy_ck, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck1510, CK_1510 | CK_310), + CLK(NULL, "arminth_ck", &arminth_ck16xx, CK_16XX), + /* CK_GEN2 clocks */ + CLK(NULL, "dsp_ck", &dsp_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspmmu_ck", &dspmmu_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspper_ck", &dspper_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), + /* CK_GEN3 clocks */ + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), + CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX | CK_7XX), + CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), + CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), + CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), + CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), + CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), + CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), + /* ULPD clocks */ + CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), + CLK(NULL, "uart1_ck", &uart1_16xx.clk, CK_16XX), + CLK(NULL, "uart2_ck", &uart2_ck, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_1510, CK_1510 | CK_310), + CLK(NULL, "uart3_ck", &uart3_16xx.clk, CK_16XX), + CLK(NULL, "usb_clko", &usb_clko, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck1510, CK_1510 | CK_310), + CLK(NULL, "usb_hhc_ck", &usb_hhc_ck16xx, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck, CK_16XX), + CLK(NULL, "usb_dc_ck", &usb_dc_ck7xx, CK_7XX), + CLK(NULL, "mclk", &mclk_1510, CK_1510 | CK_310), + CLK(NULL, "mclk", &mclk_16xx, CK_16XX), + CLK(NULL, "bclk", &bclk_1510, CK_1510 | CK_310), + CLK(NULL, "bclk", &bclk_16xx, CK_16XX), + CLK("mmci-omap.0", "fck", &mmc1_ck, CK_16XX | CK_1510 | CK_310), + CLK("mmci-omap.0", "fck", &mmc3_ck, CK_7XX), + CLK("mmci-omap.0", "ick", &armper_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("mmci-omap.1", "fck", &mmc2_ck, CK_16XX), + CLK("mmci-omap.1", "ick", &armper_ck.clk, CK_16XX), + /* Virtual clocks */ + CLK(NULL, "mpu", &virtual_ck_mpu, CK_16XX | CK_1510 | CK_310), + CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), + CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), + CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), + CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.2", "ick", &armper_ck.clk, CK_16XX), + CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.3", "ick", &dspper_ck, CK_16XX), + CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_1510 | CK_310), + CLK("omap-mcbsp.1", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.2", "fck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK("omap-mcbsp.3", "fck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), +}; + +/* + * init + */ + +static struct clk_functions omap1_clk_functions __initdata = { + .clk_enable = omap1_clk_enable, + .clk_disable = omap1_clk_disable, + .clk_round_rate = omap1_clk_round_rate, + .clk_set_rate = omap1_clk_set_rate, + .clk_disable_unused = omap1_clk_disable_unused, +}; + +int __init omap1_clk_init(void) +{ + struct omap_clk *c; + const struct omap_clock_config *info; + int crystal_type = 0; /* Default 12 MHz */ + u32 reg, cpu_mask; + +#ifdef CONFIG_DEBUG_LL + /* + * Resets some clocks that may be left on from bootloader, + * but leaves serial clocks on. + */ + omap_writel(0x3 << 29, MOD_CONF_CTRL_0); +#endif + + /* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */ + reg = omap_readw(SOFT_REQ_REG) & (1 << 4); + omap_writew(reg, SOFT_REQ_REG); + if (!cpu_is_omap15xx()) + omap_writew(0, SOFT_REQ_REG2); + + clk_init(&omap1_clk_functions); + + /* By default all idlect1 clocks are allowed to idle */ + arm_idlect1_mask = ~0; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + clk_preinit(c->lk.clk); + + cpu_mask = 0; + if (cpu_is_omap16xx()) + cpu_mask |= CK_16XX; + if (cpu_is_omap1510()) + cpu_mask |= CK_1510; + if (cpu_is_omap7xx()) + cpu_mask |= CK_7XX; + if (cpu_is_omap310()) + cpu_mask |= CK_310; + + for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++) + if (c->cpu & cpu_mask) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + } + + /* Pointers to these clocks are needed by code in clock.c */ + api_ck_p = clk_get(NULL, "api_ck"); + ck_dpll1_p = clk_get(NULL, "ck_dpll1"); + ck_ref_p = clk_get(NULL, "ck_ref"); + + info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config); + if (info != NULL) { + if (!cpu_is_omap15xx()) + crystal_type = info->system_clock_type; + } + +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + ck_ref.rate = 13000000; +#elif defined(CONFIG_ARCH_OMAP16XX) + if (crystal_type == 2) + ck_ref.rate = 19200000; +#endif + + pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: " + "0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL), + omap_readw(ARM_CKCTL)); + + /* We want to be in syncronous scalable mode */ + omap_writew(0x1000, ARM_SYSST); + +#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER + /* Use values set by bootloader. Determine PLL rate and recalculate + * dependent clocks as if kernel had changed PLL or divisors. + */ + { + unsigned pll_ctl_val = omap_readw(DPLL_CTL); + + ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */ + if (pll_ctl_val & 0x10) { + /* PLL enabled, apply multiplier and divisor */ + if (pll_ctl_val & 0xf80) + ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7; + ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1; + } else { + /* PLL disabled, apply bypass divisor */ + switch (pll_ctl_val & 0xc) { + case 0: + break; + case 0x4: + ck_dpll1.rate /= 2; + break; + default: + ck_dpll1.rate /= 4; + break; + } + } + } +#else + /* Find the highest supported frequency and enable it */ + if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { + printk(KERN_ERR "System frequencies not set. Check your config.\n"); + /* Guess sane values (60MHz) */ + omap_writew(0x2290, DPLL_CTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + ck_dpll1.rate = 60000000; + } +#endif + propagate_rate(&ck_dpll1); + /* Cache rates for clocks connected to ck_ref (not dpll1) */ + propagate_rate(&ck_ref); + printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): " + "%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n", + ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10, + ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10, + arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10); + +#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) + /* Select slicer output as OMAP input clock */ + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); +#endif + + /* Amstrad Delta wants BCLK high when inactive */ + if (machine_is_ams_delta()) + omap_writel(omap_readl(ULPD_CLOCK_CTRL) | + (1 << SDW_MCLK_INV_BIT), + ULPD_CLOCK_CTRL); + + /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ + /* (on 730, bit 13 must not be cleared) */ + if (cpu_is_omap7xx()) + omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); + else + omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); + + /* Put DSP/MPUI into reset until needed */ + omap_writew(0, ARM_RSTCT1); + omap_writew(1, ARM_RSTCT2); + omap_writew(0x400, ARM_IDLECT1); + + /* + * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8) + * of the ARM_IDLECT2 register must be set to zero. The power-on + * default value of this bit is one. + */ + omap_writew(0x0000, ARM_IDLECT2); /* Turn LCD clock off also */ + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable(&armper_ck.clk); + clk_enable(&armxor_ck.clk); + clk_enable(&armtim_ck.clk); /* This should be done by timer code */ + + if (cpu_is_omap15xx()) + clk_enable(&arm_gpio_ck); + + return 0; +} diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c new file mode 100644 index 000000000000..1bf4735e27a6 --- /dev/null +++ b/arch/arm/mach-omap1/i2c.c @@ -0,0 +1,39 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <plat/i2c.h> +#include <plat/mux.h> +#include <plat/cpu.h> + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + if (cpu_is_omap7xx()) { + omap_cfg_reg(I2C_7XX_SDA); + omap_cfg_reg(I2C_7XX_SCL); + } else { + omap_cfg_reg(I2C_SDA); + omap_cfg_reg(I2C_SCL); + } + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h new file mode 100644 index 000000000000..d7a457bbcb7f --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h @@ -0,0 +1,78 @@ +/* + * arch/arm/mach-omap1/include/mach/lcd_dma.h + * + * Extracted from arch/arm/plat-omap/include/plat/dma.h + * Copyright (C) 2003 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __MACH_OMAP1_LCD_DMA_H__ +#define __MACH_OMAP1_LCD_DMA_H__ + +/* Hardware registers for LCD DMA */ +#define OMAP1510_DMA_LCD_BASE (0xfffedb00) +#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) +#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) +#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) +#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) +#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) + +#define OMAP1610_DMA_LCD_BASE (0xfffee300) +#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) +#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) +#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) +#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) +#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) +#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) +#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) +#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) +#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) +#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) +#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) +#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) +#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) +#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) +#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) +#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) +#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) + +/* LCD DMA block numbers */ +enum { + OMAP_LCD_DMA_B1_TOP, + OMAP_LCD_DMA_B1_BOTTOM, + OMAP_LCD_DMA_B2_TOP, + OMAP_LCD_DMA_B2_BOTTOM +}; + +/* LCD DMA functions */ +extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data); +extern void omap_free_lcd_dma(void); +extern void omap_setup_lcd_dma(void); +extern void omap_enable_lcd_dma(void); +extern void omap_stop_lcd_dma(void); +extern void omap_set_lcd_dma_ext_controller(int external); +extern void omap_set_lcd_dma_single_transfer(int single); +extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type); +extern void omap_set_lcd_dma_b1_rotation(int rotate); +extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); +extern void omap_set_lcd_dma_b1_mirror(int mirror); +extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); + +extern int omap_lcd_dma_running(void); + +#endif /* __MACH_OMAP1_LCD_DMA_H__ */ diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h new file mode 100644 index 000000000000..89bd703adaf6 --- /dev/null +++ b/arch/arm/mach-omap1/include/mach/lcdc.h @@ -0,0 +1,57 @@ +/* + * arch/arm/mach-omap1/include/mach/lcdc.h + * + * Extracted from drivers/video/omap/lcdc.c + * Copyright (C) 2004 Nokia Corporation + * Author: Imre Deak <imre.deak@nokia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#ifndef __MACH_LCDC_H__ +#define __MACH_LCDC_H__ + +#define OMAP_LCDC_BASE 0xfffec000 +#define OMAP_LCDC_SIZE 256 +#define OMAP_LCDC_IRQ INT_LCD_CTRL + +#define OMAP_LCDC_CONTROL (OMAP_LCDC_BASE + 0x00) +#define OMAP_LCDC_TIMING0 (OMAP_LCDC_BASE + 0x04) +#define OMAP_LCDC_TIMING1 (OMAP_LCDC_BASE + 0x08) +#define OMAP_LCDC_TIMING2 (OMAP_LCDC_BASE + 0x0c) +#define OMAP_LCDC_STATUS (OMAP_LCDC_BASE + 0x10) +#define OMAP_LCDC_SUBPANEL (OMAP_LCDC_BASE + 0x14) +#define OMAP_LCDC_LINE_INT (OMAP_LCDC_BASE + 0x18) +#define OMAP_LCDC_DISPLAY_STATUS (OMAP_LCDC_BASE + 0x1c) + +#define OMAP_LCDC_STAT_DONE (1 << 0) +#define OMAP_LCDC_STAT_VSYNC (1 << 1) +#define OMAP_LCDC_STAT_SYNC_LOST (1 << 2) +#define OMAP_LCDC_STAT_ABC (1 << 3) +#define OMAP_LCDC_STAT_LINE_INT (1 << 4) +#define OMAP_LCDC_STAT_FUF (1 << 5) +#define OMAP_LCDC_STAT_LOADED_PALETTE (1 << 6) + +#define OMAP_LCDC_CTRL_LCD_EN (1 << 0) +#define OMAP_LCDC_CTRL_LCD_TFT (1 << 7) +#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL (1 << 10) + +#define OMAP_LCDC_IRQ_VSYNC (1 << 2) +#define OMAP_LCDC_IRQ_DONE (1 << 3) +#define OMAP_LCDC_IRQ_LOADED_PALETTE (1 << 4) +#define OMAP_LCDC_IRQ_LINE_NIRQ (1 << 5) +#define OMAP_LCDC_IRQ_LINE (1 << 6) +#define OMAP_LCDC_IRQ_MASK (((1 << 5) - 1) << 2) + +#endif /* __MACH_LCDC_H__ */ diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 2a6d68aa3489..d9b8d82530ae 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,7 +18,8 @@ #include <plat/mux.h> #include <plat/tc.h> -extern int omap1_clk_init(void); +#include "clock.h" + extern void omap_check_revision(void); extern void omap_sram_init(void); extern void omapfb_reserve_sdram(void); diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c new file mode 100644 index 000000000000..3be11af687bb --- /dev/null +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -0,0 +1,448 @@ +/* + * linux/arch/arm/mach-omap1/lcd_dma.c + * + * Extracted from arch/arm/plat-omap/dma.c + * Copyright (C) 2003 - 2008 Nokia Corporation + * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com> + * Graphics DMA and LCD DMA graphics tranformations + * by Imre Deak <imre.deak@nokia.com> + * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc. + * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com> + * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc. + * + * Copyright (C) 2009 Texas Instruments + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * Support functions for the OMAP internal DMA channels. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/lcdc.h> +#include <plat/dma.h> + +int omap_lcd_dma_running(void) +{ + /* + * On OMAP1510, internal LCD controller will start the transfer + * when it gets enabled, so assume DMA running if LCD enabled. + */ + if (cpu_is_omap1510()) + if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN) + return 1; + + /* Check if LCD DMA is running */ + if (cpu_is_omap16xx()) + if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + return 1; + + return 0; +} + +static struct lcd_dma_info { + spinlock_t lock; + int reserved; + void (*callback)(u16 status, void *data); + void *cb_data; + + int active; + unsigned long addr, size; + int rotate, data_type, xres, yres; + int vxres; + int mirror; + int xscale, yscale; + int ext_ctrl; + int src_port; + int single_transfer; +} lcd_dma; + +void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, + int data_type) +{ + lcd_dma.addr = addr; + lcd_dma.data_type = data_type; + lcd_dma.xres = fb_xres; + lcd_dma.yres = fb_yres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1); + +void omap_set_lcd_dma_src_port(int port) +{ + lcd_dma.src_port = port; +} + +void omap_set_lcd_dma_ext_controller(int external) +{ + lcd_dma.ext_ctrl = external; +} +EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); + +void omap_set_lcd_dma_single_transfer(int single) +{ + lcd_dma.single_transfer = single; +} +EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); + +void omap_set_lcd_dma_b1_rotation(int rotate) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); + BUG(); + return; + } + lcd_dma.rotate = rotate; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); + +void omap_set_lcd_dma_b1_mirror(int mirror) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.mirror = mirror; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); + +void omap_set_lcd_dma_b1_vxres(unsigned long vxres) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA virtual resulotion is not supported " + "in 1510 mode\n"); + BUG(); + } + lcd_dma.vxres = vxres; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); + +void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) +{ + if (cpu_is_omap1510()) { + printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); + BUG(); + } + lcd_dma.xscale = xscale; + lcd_dma.yscale = yscale; +} +EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); + +static void set_b1_regs(void) +{ + unsigned long top, bottom; + int es; + u16 w; + unsigned long en, fn; + long ei, fi; + unsigned long vxres; + unsigned int xscale, yscale; + + switch (lcd_dma.data_type) { + case OMAP_DMA_DATA_TYPE_S8: + es = 1; + break; + case OMAP_DMA_DATA_TYPE_S16: + es = 2; + break; + case OMAP_DMA_DATA_TYPE_S32: + es = 4; + break; + default: + BUG(); + return; + } + + vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; + xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; + yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; + BUG_ON(vxres < lcd_dma.xres); + +#define PIXADDR(x, y) (lcd_dma.addr + \ + ((y) * vxres * yscale + (x) * xscale) * es) +#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) + + switch (lcd_dma.rotate) { + case 0: + if (!lcd_dma.mirror) { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + /* 1510 DMA requires the bottom address to be 2 more + * than the actual last memory access location. */ + if (cpu_is_omap1510() && + lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) + bottom += 2; + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 90: + if (!lcd_dma.mirror) { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); + } else { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(0, 1, 0, 0); + fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + case 180: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + bottom = PIXADDR(0, 0); + ei = PIXSTEP(1, 0, 0, 0); + fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); + } else { + top = PIXADDR(0, lcd_dma.yres - 1); + bottom = PIXADDR(lcd_dma.xres - 1, 0); + ei = PIXSTEP(0, 0, 1, 0); + fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); + } + en = lcd_dma.xres; + fn = lcd_dma.yres; + break; + case 270: + if (!lcd_dma.mirror) { + top = PIXADDR(lcd_dma.xres - 1, 0); + bottom = PIXADDR(0, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); + } else { + top = PIXADDR(0, 0); + bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); + ei = PIXSTEP(0, 0, 0, 1); + fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); + } + en = lcd_dma.yres; + fn = lcd_dma.xres; + break; + default: + BUG(); + return; /* Suppress warning about uninitialized vars */ + } + + if (cpu_is_omap1510()) { + omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); + omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); + omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); + omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); + + return; + } + + /* 1610 regs */ + omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); + omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); + omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); + omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); + + omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); + omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); + + w = omap_readw(OMAP1610_DMA_LCD_CSDP); + w &= ~0x03; + w |= lcd_dma.data_type; + omap_writew(w, OMAP1610_DMA_LCD_CSDP); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + /* Always set the source port as SDRAM for now*/ + w &= ~(0x03 << 6); + if (lcd_dma.callback != NULL) + w |= 1 << 1; /* Block interrupt enable */ + else + w &= ~(1 << 1); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + if (!(lcd_dma.rotate || lcd_dma.mirror || + lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* Set the double-indexed addressing mode */ + w |= (0x03 << 12); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); + omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); + omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); +} + +static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) +{ + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + if (unlikely(!(w & (1 << 3)))) { + printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); + return IRQ_NONE; + } + /* Ack the IRQ */ + w |= (1 << 3); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + lcd_dma.active = 0; + if (lcd_dma.callback != NULL) + lcd_dma.callback(w, lcd_dma.cb_data); + + return IRQ_HANDLED; +} + +int omap_request_lcd_dma(void (*callback)(u16 status, void *data), + void *data) +{ + spin_lock_irq(&lcd_dma.lock); + if (lcd_dma.reserved) { + spin_unlock_irq(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA channel already reserved\n"); + BUG(); + return -EBUSY; + } + lcd_dma.reserved = 1; + spin_unlock_irq(&lcd_dma.lock); + lcd_dma.callback = callback; + lcd_dma.cb_data = data; + lcd_dma.active = 0; + lcd_dma.single_transfer = 0; + lcd_dma.rotate = 0; + lcd_dma.vxres = 0; + lcd_dma.mirror = 0; + lcd_dma.xscale = 0; + lcd_dma.yscale = 0; + lcd_dma.ext_ctrl = 0; + lcd_dma.src_port = 0; + + return 0; +} +EXPORT_SYMBOL(omap_request_lcd_dma); + +void omap_free_lcd_dma(void) +{ + spin_lock(&lcd_dma.lock); + if (!lcd_dma.reserved) { + spin_unlock(&lcd_dma.lock); + printk(KERN_ERR "LCD DMA is not reserved\n"); + BUG(); + return; + } + if (!cpu_is_omap1510()) + omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, + OMAP1610_DMA_LCD_CCR); + lcd_dma.reserved = 0; + spin_unlock(&lcd_dma.lock); +} +EXPORT_SYMBOL(omap_free_lcd_dma); + +void omap_enable_lcd_dma(void) +{ + u16 w; + + /* + * Set the Enable bit only if an external controller is + * connected. Otherwise the OMAP internal controller will + * start the transfer when it gets enabled. + */ + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w |= 1 << 8; + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + + lcd_dma.active = 1; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w |= 1 << 7; + omap_writew(w, OMAP1610_DMA_LCD_CCR); +} +EXPORT_SYMBOL(omap_enable_lcd_dma); + +void omap_setup_lcd_dma(void) +{ + BUG_ON(lcd_dma.active); + if (!cpu_is_omap1510()) { + /* Set some reasonable defaults */ + omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); + omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); + omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); + } + set_b1_regs(); + if (!cpu_is_omap1510()) { + u16 w; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + /* + * If DMA was already active set the end_prog bit to have + * the programmed register set loaded into the active + * register set. + */ + w |= 1 << 11; /* End_prog */ + if (!lcd_dma.single_transfer) + w |= (3 << 8); /* Auto_init, repeat */ + omap_writew(w, OMAP1610_DMA_LCD_CCR); + } +} +EXPORT_SYMBOL(omap_setup_lcd_dma); + +void omap_stop_lcd_dma(void) +{ + u16 w; + + lcd_dma.active = 0; + if (cpu_is_omap1510() || !lcd_dma.ext_ctrl) + return; + + w = omap_readw(OMAP1610_DMA_LCD_CCR); + w &= ~(1 << 7); + omap_writew(w, OMAP1610_DMA_LCD_CCR); + + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); +} +EXPORT_SYMBOL(omap_stop_lcd_dma); + +static int __init omap_init_lcd_dma(void) +{ + int r; + + if (cpu_is_omap16xx()) { + u16 w; + + /* this would prevent OMAP sleep */ + w = omap_readw(OMAP1610_DMA_LCD_CTRL); + w &= ~(1 << 8); + omap_writew(w, OMAP1610_DMA_LCD_CTRL); + } + + spin_lock_init(&lcd_dma.lock); + + r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, + "LCD DMA", NULL); + if (r != 0) + printk(KERN_ERR "unable to request IRQ for LCD DMA " + "(error %d)\n", r); + + return r; +} + +arch_initcall(omap_init_lcd_dma); + diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 785371e982fc..07212cc621ae 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -50,12 +50,18 @@ MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 6, 28, 1, 0) +MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3, 3, 1, 2, 0, 0) +MUX_CFG_7XX("W19_7XX_USB_DCRST", 3, 7, 1, 6, 0, 0) /* MMC Pins */ MUX_CFG_7XX("MMC_7XX_CMD", 2, 9, 0, 8, 1, 0) MUX_CFG_7XX("MMC_7XX_CLK", 2, 13, 0, 12, 1, 0) MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) + +/* I2C interface */ +MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) +MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h new file mode 100644 index 000000000000..07074d79adce --- /dev/null +++ b/arch/arm/mach-omap1/opp.h @@ -0,0 +1,28 @@ +/* + * linux/arch/arm/mach-omap1/opp.h + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H +#define __ARCH_ARM_MACH_OMAP1_OPP_H + +#include <linux/types.h> + +struct mpu_rate { + unsigned long rate; + unsigned long xtal; + unsigned long pll_rate; + __u16 ckctl_val; + __u16 dpllctl_val; +}; + +extern struct mpu_rate omap1_rate_table[]; + +#endif diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c new file mode 100644 index 000000000000..75a546514994 --- /dev/null +++ b/arch/arm/mach-omap1/opp_data.c @@ -0,0 +1,59 @@ +/* + * linux/arch/arm/mach-omap1/opp_data.c + * + * Copyright (C) 2004 - 2005 Nokia corporation + * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> + * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "opp.h" + +/*------------------------------------------------------------------------- + * Omap1 MPU rate table + *-------------------------------------------------------------------------*/ +struct mpu_rate omap1_rate_table[] = { + /* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL + * NOTE: Comment order here is different from bits in CKCTL value: + * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv + */ +#if defined(CONFIG_OMAP_ARM_216MHZ) + { 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_195MHZ) + { 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_192MHZ) + { 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */ + { 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */ + { 96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */ + { 48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */ + { 24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_182MHZ) + { 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_168MHZ) + { 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */ +#endif +#if defined(CONFIG_OMAP_ARM_150MHZ) + { 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_120MHZ) + { 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */ +#endif +#if defined(CONFIG_OMAP_ARM_96MHZ) + { 96000000, 12000000, 96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_60MHZ) + { 60000000, 12000000, 60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */ +#endif +#if defined(CONFIG_OMAP_ARM_30MHZ) + { 30000000, 12000000, 60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */ +#endif + { 0, 0, 0, 0, 0 }, +}; + diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7309aab305a9..76c11ee113e9 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -24,6 +24,18 @@ config ARCH_OMAP3430 depends on ARCH_OMAP3 && ARCH_OMAP34XX select ARCH_OMAP_OTG +config OMAP_PACKAGE_CBC + bool + +config OMAP_PACKAGE_CBB + bool + +config OMAP_PACKAGE_CUS + bool + +config OMAP_PACKAGE_CBP + bool + comment "OMAP Board Type" depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 @@ -52,14 +64,17 @@ config MACH_OMAP_2430SDP config MACH_OMAP3_BEAGLE bool "OMAP3 BEAGLE board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_LDP bool "OMAP3 LDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OVERO bool "Gumstix Overo board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3EVM bool "OMAP 3530 EVM board" @@ -68,14 +83,22 @@ config MACH_OMAP3EVM config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP3_PANDORA bool "OMAP3 Pandora" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB + +config MACH_OMAP3_TOUCHBOOK + bool "OMAP3 Touch Book" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_NOKIA_N800 bool @@ -96,26 +119,33 @@ config MACH_NOKIA_N8X0 config MACH_NOKIA_RX51 bool "Nokia RX-51 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM2 bool "OMAP3 Zoom2 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_CM_T35 bool "CompuLab CM-T35 module" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CUS + select OMAP_MUX config MACH_IGEP0020 bool "IGEP0020" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBB config MACH_OMAP_3630SDP bool "OMAP3630 SDP board" depends on ARCH_OMAP3 && ARCH_OMAP34XX + select OMAP_PACKAGE_CBP config MACH_OMAP_4430SDP bool "OMAP 4430 SDP board" @@ -128,3 +158,15 @@ config OMAP3_EMU help Say Y here to enable debugging hardware of omap3 +config OMAP3_SDRC_AC_TIMING + bool "Enable SDRC AC timing register changes" + depends on ARCH_OMAP3 && ARCH_OMAP34XX + default n + help + If you know that none of your system initiators will attempt to + access SDRAM during CORE DVFS, select Y here. This should boost + SDRAM performance at lower CORE OPPs. There are relatively few + users who will wish to say yes at this point - almost everyone will + wish to say no. Selecting yes without understanding what is + going on could result in system crashes; + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 32548a4510c5..b32678b848bc 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -6,11 +6,14 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o omap-2-3-common = irq.o sdrc.o omap_hwmod.o +omap-3-4-common = dpll.o prcm-common = prcm.o powerdomain.o -clock-common = clock.o clockdomain.o +clock-common = clock.o clock_common_data.o clockdomain.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) -obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) +obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \ + $(omap-3-4-common) +obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) prcm.o clock.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o @@ -23,6 +26,9 @@ obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o obj-$(CONFIG_ARCH_OMAP3) += sram34xx.o +# Pin multiplexing +obj-$(CONFIG_ARCH_OMAP3) += mux34xx.o + # SMS/SDRC obj-$(CONFIG_ARCH_OMAP2) += sdrc2xxx.o # obj-$(CONFIG_ARCH_OMAP3) += sdrc3xxx.o @@ -41,8 +47,11 @@ obj-$(CONFIG_ARCH_OMAP3) += cm.o obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o # Clock framework -obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o -obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o +obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o +obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o +obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o +obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o +obj-$(CONFIG_ARCH_OMAP4) += clock44xx.o clock44xx_data.o # EMU peripherals obj-$(CONFIG_OMAP3_EMU) += emu.o @@ -55,6 +64,9 @@ iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y) +i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o +obj-y += $(i2c-omap-m) $(i2c-omap-y) + # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o @@ -93,7 +105,8 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ mmc-twl4030.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ mmc-twl4030.o - +obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ + mmc-twl4030.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5bda9fdbee9e..4cfb7b68dfad 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -31,7 +31,6 @@ #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/board.h> #include <plat/usb.h> #include <plat/common.h> @@ -42,6 +41,7 @@ #include <plat/control.h> #include <plat/gpmc-smc91x.h> +#include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" @@ -625,7 +625,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -640,8 +642,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_3430sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3430_i2c_init(); platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); if (omap_rev() > OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 348b70b98336..739059632811 100755 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -23,6 +23,7 @@ #include <mach/board-zoom.h> +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) @@ -48,7 +49,9 @@ static inline void board_smc91x_init(void) static void enable_board_wakeup_source(void) { - omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { @@ -82,8 +85,17 @@ static void __init omap_sdp_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); board_smc91x_init(); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 415a13d767cc..b4e6eca0e8a9 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -30,6 +30,8 @@ #include <plat/common.h> #include <plat/usb.h> +#include "mux.h" + /* * Board initialization */ @@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init am3517_evm_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 8a2ce77a02ec..fbbd68d69cc8 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -26,6 +26,7 @@ #include <linux/leds.h> #include <linux/err.h> #include <linux/clk.h> +#include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -120,6 +121,12 @@ static void __init apollon_flash_init(void) apollon_flash_resource[0].end = base + SZ_128K - 1; } +static struct smc91x_platdata appolon_smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource apollon_smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -134,6 +141,9 @@ static struct resource apollon_smc91x_resources[] = { static struct platform_device apollon_smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &appolon_smc91x_info, + }, .num_resources = ARRAY_SIZE(apollon_smc91x_resources), .resource = apollon_smc91x_resources, }; diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 22c45290db63..1591aae64500 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -38,13 +38,13 @@ #include <plat/board.h> #include <plat/common.h> -#include <plat/mux.h> #include <plat/nand.h> #include <plat/gpmc.h> #include <plat/usb.h> #include <mach/hardware.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -482,8 +482,102 @@ static void __init cm_t35_map_io(void) omap2_map_common_io(); } +static struct omap_board_mux board_mux[] __initdata = { + /* nCS and IRQ for CM-T35 ethernet */ + OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0), + OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* nCS and IRQ for SB-T35 ethernet */ + OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0), + OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP), + + /* PENDOWN GPIO */ + OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + + /* mUSB */ + OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* MMC 2 */ + OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + + /* McSPI 1 */ + OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN), + + /* McSPI 4 */ + OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP), + + /* McBSP 2 */ + OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* serial ports */ + OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT), + OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT), + OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + + /* DSS */ + OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), + + /* TPS IRQ */ + OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \ + OMAP_PIN_INPUT_PULLUP), + + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + static void __init cm_t35_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); @@ -492,8 +586,6 @@ static void __init cm_t35_init(void) cm_t35_init_led(); usb_musb_init(); - - omap_cfg_reg(AF26_34XX_SYS_NIRQ); } MACHINE_START(CM_T35, "Compulab CM-T35") diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fa62e80c13b7..44239e3ec02e 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -27,9 +27,9 @@ #include <plat/board.h> #include <plat/common.h> #include <plat/gpmc.h> -#include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define IGEP2_SMSC911X_CS 5 @@ -203,8 +203,17 @@ static int __init igep2_i2c_init(void) return 0; } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init igep2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); igep2_i2c_init(); omap_serial_init(); usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c062238fe881..37431738f1c2 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -43,6 +43,7 @@ #include <plat/control.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define LDP_SMSC911X_CS 1 @@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_ldp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); ts_gpio = 54; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 41480bd0e58a..6ada8029f9a8 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -41,10 +41,10 @@ #include <plat/common.h> #include <plat/gpmc.h> #include <plat/nand.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/timer-gp.h> +#include "mux.h" #include "mmc-twl4030.h" #define GPMC_CS0_BASE 0x60 @@ -140,10 +140,10 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { if (system_rev >= 0x20 && system_rev <= 0x34301000) { - omap_cfg_reg(AG9_34XX_GPIO23); + omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_wp = 23; } else { - omap_cfg_reg(AH8_34XX_GPIO29); + omap_mux_init_gpio(29, OMAP_PIN_INPUT); } /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -422,14 +422,23 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_beagle_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_serial_init(); - omap_cfg_reg(J25_34XX_GPIO170); + omap_mux_init_gpio(170, OMAP_PIN_INPUT); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ gpio_direction_output(170, true); @@ -439,8 +448,8 @@ static void __init omap3_beagle_init(void) omap3beagle_flash_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3_beagle_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5efc2e9068db..18913e96e34d 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -38,11 +38,11 @@ #include <asm/mach/map.h> #include <plat/board.h> -#include <plat/mux.h> #include <plat/usb.h> #include <plat/common.h> #include <plat/mcspi.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -223,7 +223,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - omap_cfg_reg(L8_34XX_GPIO63); + omap_mux_init_gpio(63, OMAP_PIN_INPUT); mmc[0].gpio_cd = gpio + 0; twl4030_mmc_init(mmc); @@ -422,9 +422,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_evm_i2c_init(); @@ -440,24 +449,24 @@ static void __init omap3_evm_init(void) #endif if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_cfg_reg(AF9_34XX_GPIO22); + omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); /* Select EHCI port on main board */ - omap_cfg_reg(U3_34XX_GPIO61); + omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); /* setup EHCI phy reset config */ - omap_cfg_reg(AH14_34XX_GPIO21); + omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); ehci_pdata.reset_gpio_port[1] = 21; } else { /* setup EHCI phy reset on MDC */ - omap_cfg_reg(AF4_34XX_GPIO135_OUT); + omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); ehci_pdata.reset_gpio_port[1] = 135; } usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2db5ba5b3bf7..6f6c601eeab7 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -40,8 +40,8 @@ #include <mach/hardware.h> #include <plat/mcspi.h> #include <plat/usb.h> -#include <plat/mux.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -98,10 +98,10 @@ static struct gpio_keys_button pandora_gpio_keys[] = { GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), - GPIO_BUTTON_LOW(111, BTN_A, "a"), - GPIO_BUTTON_LOW(106, BTN_B, "b"), - GPIO_BUTTON_LOW(109, BTN_X, "x"), - GPIO_BUTTON_LOW(101, BTN_Y, "y"), + GPIO_BUTTON_LOW(109, KEY_KP1, "game 1"), + GPIO_BUTTON_LOW(111, KEY_KP2, "game 2"), + GPIO_BUTTON_LOW(106, KEY_KP3, "game 3"), + GPIO_BUTTON_LOW(101, KEY_KP4, "game 4"), GPIO_BUTTON_LOW(102, BTN_TL, "l"), GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), GPIO_BUTTON_LOW(105, BTN_TR, "r"), @@ -315,7 +315,7 @@ static int __init omap3pandora_i2c_init(void) omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, ARRAY_SIZE(omap3pandora_i2c_boardinfo)); /* i2c2 pins are not connected */ - omap_register_i2c_bus(3, 400, NULL, 0); + omap_register_i2c_bus(3, 100, NULL, 0); return 0; } @@ -368,23 +368,8 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { } }; -static struct platform_device omap3pandora_lcd_device = { - .name = "pandora_lcd", - .id = -1, -}; - -static struct omap_lcd_config omap3pandora_lcd_config __initdata = { - .ctrl_name = "internal", -}; - -static struct omap_board_config_kernel omap3pandora_config[] __initdata = { - { OMAP_TAG_LCD, &omap3pandora_lcd_config }, -}; - static void __init omap3pandora_init_irq(void) { - omap_board_config = omap3pandora_config; - omap_board_config_size = ARRAY_SIZE(omap3pandora_config); omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); @@ -392,7 +377,6 @@ static void __init omap3pandora_init_irq(void) } static struct platform_device *omap3pandora_devices[] __initdata = { - &omap3pandora_lcd_device, &pandora_leds_gpio, &pandora_keys_gpio, }; @@ -409,8 +393,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3pandora_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3pandora_i2c_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); @@ -423,8 +416,8 @@ static void __init omap3pandora_init(void) usb_musb_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3pandora_map_io(void) diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c new file mode 100644 index 000000000000..c9e5ebb4d91d --- /dev/null +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -0,0 +1,572 @@ +/* + * linux/arch/arm/mach-omap2/board-omap3touchbook.c + * + * Copyright (C) 2009 Always Innovating + * + * Modified from mach-omap2/board-omap3beagleboard.c + * + * Initial code: Grégoire Gentil, Tim Yamin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/gpio.h> +#include <linux/input.h> +#include <linux/gpio_keys.h> + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/nand.h> + +#include <plat/mcspi.h> +#include <linux/spi/spi.h> + +#include <linux/spi/ads7846.h> + +#include <linux/regulator/machine.h> +#include <linux/i2c/twl4030.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <plat/board.h> +#include <plat/common.h> +#include <plat/gpmc.h> +#include <plat/nand.h> +#include <plat/usb.h> +#include <plat/timer-gp.h> + +#include "mux.h" +#include "mmc-twl4030.h" + +#include <asm/setup.h> + +#define GPMC_CS0_BASE 0x60 +#define GPMC_CS_SIZE 0x30 + +#define NAND_BLOCK_SIZE SZ_128K + +#define OMAP3_AC_GPIO 136 +#define OMAP3_TS_GPIO 162 +#define TB_BL_PWM_TIMER 9 +#define TB_KILL_POWER_GPIO 168 + +unsigned long touchbook_revision; + +static struct mtd_partition omap3touchbook_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader", + .offset = 0, + .size = 4 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 15 * NAND_BLOCK_SIZE, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot Env", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */ + .size = 1 * NAND_BLOCK_SIZE, + }, + { + .name = "Kernel", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 32 * NAND_BLOCK_SIZE, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct omap_nand_platform_data omap3touchbook_nand_data = { + .options = NAND_BUSWIDTH_16, + .parts = omap3touchbook_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .nand_setup = NULL, + .dev_ready = NULL, +}; + +static struct resource omap3touchbook_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3touchbook_nand_device = { + .name = "omap2-nand", + .id = -1, + .dev = { + .platform_data = &omap3touchbook_nand_data, + }, + .num_resources = 1, + .resource = &omap3touchbook_nand_resource, +}; + +#include "sdram-micron-mt46h32m32lf-6.h" + +static struct twl4030_hsmmc_info mmc[] = { + { + .mmc = 1, + .wires = 8, + .gpio_wp = 29, + }, + {} /* Terminator */ +}; + +static struct platform_device omap3_touchbook_lcd_device = { + .name = "omap3touchbook_lcd", + .id = -1, +}; + +static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { + .ctrl_name = "internal", +}; + +static struct regulator_consumer_supply touchbook_vmmc1_supply = { + .supply = "vmmc", +}; + +static struct regulator_consumer_supply touchbook_vsim_supply = { + .supply = "vmmc_aux", +}; + +static struct gpio_led gpio_leds[]; + +static int touchbook_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + if (system_rev >= 0x20 && system_rev <= 0x34301000) { + omap_mux_init_gpio(23, OMAP_PIN_INPUT); + mmc[0].gpio_wp = 23; + } else { + omap_mux_init_gpio(29, OMAP_PIN_INPUT); + } + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); + + /* link regulators to MMC adapters */ + touchbook_vmmc1_supply.dev = mmc[0].dev; + touchbook_vsim_supply.dev = mmc[0].dev; + + /* REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + + gpio_request(gpio + 1, "EHCI_nOC"); + gpio_direction_input(gpio + 1); + + /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ + gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + + return 0; +} + +static struct twl4030_gpio_platform_data touchbook_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .use_leds = true, + .pullups = BIT(1), + .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + | BIT(15) | BIT(16) | BIT(17), + .setup = touchbook_twl_gpio_setup, +}; + +static struct regulator_consumer_supply touchbook_vdac_supply = { + .supply = "vdac", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +static struct regulator_consumer_supply touchbook_vdvi_supply = { + .supply = "vdvi", + .dev = &omap3_touchbook_lcd_device.dev, +}; + +/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ +static struct regulator_init_data touchbook_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vmmc1_supply, +}; + +/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ +static struct regulator_init_data touchbook_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vsim_supply, +}; + +/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ +static struct regulator_init_data touchbook_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdac_supply, +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_init_data touchbook_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &touchbook_vdvi_supply, +}; + +static struct twl4030_usb_data touchbook_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_codec_audio_data touchbook_audio_data = { + .audio_mclk = 26000000, +}; + +static struct twl4030_codec_data touchbook_codec_data = { + .audio_mclk = 26000000, + .audio = &touchbook_audio_data, +}; + +static struct twl4030_platform_data touchbook_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .usb = &touchbook_usb_data, + .gpio = &touchbook_gpio_data, + .codec = &touchbook_codec_data, + .vmmc1 = &touchbook_vmmc1, + .vsim = &touchbook_vsim, + .vdac = &touchbook_vdac, + .vpll2 = &touchbook_vpll2, +}; + +static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("twl4030", 0x48), + .flags = I2C_CLIENT_WAKE, + .irq = INT_34XX_SYS_NIRQ, + .platform_data = &touchbook_twldata, + }, +}; + +static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { + { + I2C_BOARD_INFO("bq27200", 0x55), + }, +}; + +static int __init omap3_touchbook_i2c_init(void) +{ + /* Standard TouchBook bus */ + omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, + ARRAY_SIZE(touchbook_i2c_boardinfo)); + + /* Additional TouchBook bus */ + omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, + ARRAY_SIZE(touchBook_i2c_boardinfo)); + + return 0; +} + +static void __init omap3_ads7846_init(void) +{ + if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { + printk(KERN_ERR "Failed to request GPIO %d for " + "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); + return; + } + + gpio_direction_input(OMAP3_TS_GPIO); + omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); + omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); +} + +static struct ads7846_platform_data ads7846_config = { + .x_min = 100, + .y_min = 265, + .x_max = 3950, + .y_max = 3750, + .x_plate_ohms = 40, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 5, + .debounce_rep = 1, + .gpio_pendown = OMAP3_TS_GPIO, + .keep_vref_on = 1, +}; + +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { + { + .modalias = "ads7846", + .bus_num = 4, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), + .platform_data = &ads7846_config, + } +}; + +static struct gpio_led gpio_leds[] = { + { + .name = "touchbook::usr0", + .default_trigger = "heartbeat", + .gpio = 150, + }, + { + .name = "touchbook::usr1", + .default_trigger = "mmc0", + .gpio = 149, + }, + { + .name = "touchbook::pmu_stat", + .gpio = -EINVAL, /* gets replaced */ + .active_low = true, + }, +}; + +static struct gpio_led_platform_data gpio_led_info = { + .leds = gpio_leds, + .num_leds = ARRAY_SIZE(gpio_leds), +}; + +static struct platform_device leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &gpio_led_info, + }, +}; + +static struct gpio_keys_button gpio_buttons[] = { + { + .code = BTN_EXTRA, + .gpio = 7, + .desc = "user", + .wakeup = 1, + }, + { + .code = KEY_POWER, + .gpio = 183, + .desc = "power", + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data gpio_key_info = { + .buttons = gpio_buttons, + .nbuttons = ARRAY_SIZE(gpio_buttons), +}; + +static struct platform_device keys_gpio = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &gpio_key_info, + }, +}; + +static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = { + { OMAP_TAG_LCD, &omap3_touchbook_lcd_config }, +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + +static void __init omap3_touchbook_init_irq(void) +{ + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = omap3_touchbook_config; + omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config); + omap2_init_common_hw(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + omap_init_irq(); +#ifdef CONFIG_OMAP_32K_TIMER + omap2_gp_clockevent_set_gptimer(12); +#endif + omap_gpio_init(); +} + +static struct platform_device *omap3_touchbook_devices[] __initdata = { + &omap3_touchbook_lcd_device, + &leds_gpio, + &keys_gpio, +}; + +static void __init omap3touchbook_flash_init(void) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + omap3touchbook_nand_data.cs = nandcs; + omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *) + (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE); + omap3touchbook_nand_data.gpmc_baseaddr = + (void *) (gpmc_base_add); + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (platform_device_register(&omap3touchbook_nand_device) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} + +static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + + .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = 147, + .reset_gpio_port[2] = -EINVAL +}; + +static void omap3_touchbook_poweroff(void) +{ + int r; + + r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); + if (r < 0) { + printk(KERN_ERR "Unable to get kill power GPIO\n"); + return; + } + + gpio_direction_output(TB_KILL_POWER_GPIO, 0); +} + +static void __init early_touchbook_revision(char **p) +{ + if (!*p) + return; + + strict_strtoul(*p, 10, &touchbook_revision); +} +__early_param("tbr=", early_touchbook_revision); + +static void __init omap3_touchbook_init(void) +{ + pm_power_off = omap3_touchbook_poweroff; + + omap3_touchbook_i2c_init(); + platform_add_devices(omap3_touchbook_devices, + ARRAY_SIZE(omap3_touchbook_devices)); + omap_serial_init(); + + omap_mux_init_gpio(170, OMAP_PIN_INPUT); + gpio_request(176, "DVI_nPD"); + /* REVISIT leave DVI powered down until it's needed ... */ + gpio_direction_output(176, true); + + /* Touchscreen and accelerometer */ + spi_register_board_info(omap3_ads7846_spi_board_info, + ARRAY_SIZE(omap3_ads7846_spi_board_info)); + omap3_ads7846_init(); + usb_musb_init(); + usb_ehci_init(&ehci_pdata); + omap3touchbook_flash_init(); + + /* Ensure SDRC pins are mux'd for self-refresh */ + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); +} + +static void __init omap3_touchbook_map_io(void) +{ + omap2_set_globals_343x(); + omap2_map_common_io(); +} + +MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") + /* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap3_touchbook_map_io, + .init_irq = omap3_touchbook_init_irq, + .init_machine = omap3_touchbook_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52dfd51a938e..5b78a87217e0 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -44,9 +44,9 @@ #include <plat/gpmc.h> #include <mach/hardware.h> #include <plat/nand.h> -#include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -405,9 +405,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif static void __init overo_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); @@ -418,8 +426,8 @@ static void __init overo_init(void) overo_init_smsc911x(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); if ((gpio_request(OVERO_GPIO_W2W_NRESET, "OVERO_GPIO_W2W_NRESET") == 0) && diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 15ce6514c5fd..bf26ad31f9ba 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -33,6 +33,7 @@ #include <plat/onenand.h> #include <plat/gpmc-smc91x.h> +#include "mux.h" #include "mmc-twl4030.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 @@ -59,7 +60,7 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { .bus_num = 4, .chip_select = 0, .max_speed_hz = 48000000, - .mode = SPI_MODE_2, + .mode = SPI_MODE_3, .controller_data = &wl1251_mcspi_config, .platform_data = &wl1251_pdata, }, @@ -630,9 +631,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = { static void __init board_smc91x_init(void) { - omap_cfg_reg(U8_34XX_GPIO54_DOWN); - omap_cfg_reg(G25_34XX_GPIO86_OUT); - omap_cfg_reg(H19_34XX_GPIO164_OUT); + omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_gpio(86, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(164, OMAP_PIN_OUTPUT); gpmc_smc91x_init(&board_smc91x_data); } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1bb1de245917..67bb3476b707 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -23,13 +23,14 @@ #include <asm/mach/map.h> #include <plat/mcspi.h> -#include <plat/mux.h> #include <plat/board.h> #include <plat/common.h> #include <plat/dma.h> #include <plat/gpmc.h> #include <plat/usb.h> +#include "mux.h" + struct omap_sdrc_params *rx51_get_sdram_timings(void); static struct omap_lcd_config rx51_lcd_config = { @@ -69,15 +70,24 @@ static void __init rx51_init_irq(void) extern void __init rx51_peripherals_init(void); +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init rx51_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); /* Ensure SDRC pins are mux'd for self-refresh */ - omap_cfg_reg(H16_34XX_SDRC_CKE0); - omap_cfg_reg(H17_34XX_SDRC_CKE1); + omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); + omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init rx51_map_io(void) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index f14baa392760..258794db488f 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -152,14 +152,20 @@ static struct regulator_init_data zoom_vsim = { static struct twl4030_hsmmc_info mmc[] __initdata = { { + .name = "external", .mmc = 1, .wires = 4, .gpio_wp = -EINVAL, + .power_saving = true, }, { + .name = "internal", .mmc = 2, - .wires = 4, + .wires = 8, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .nonremovable = true, + .power_saving = true, }, {} /* Terminator */ }; @@ -167,11 +173,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - /* gpio + 0 is "mmc0_cd" (input/IRQ), - * gpio + 1 is "mmc1_cd" (input/IRQ) - */ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(mmc); /* link regulators to MMC adapters ... we "know" the @@ -236,6 +239,7 @@ static struct twl4030_platform_data zoom_twldata = { .gpio = &zoom_gpio_data, .keypad = &zoom_kp_twl4030_data, .codec = &zoom_codec_data, + .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index d94d047c7dce..bb87cf7878ff 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -23,6 +23,7 @@ #include <mach/board-zoom.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" static void __init omap_zoom2_init_irq(void) @@ -68,8 +69,17 @@ static struct twl4030_platform_data zoom2_twldata = { #endif +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); zoom_peripherals_init(); zoom_debugboard_init(); } diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c index 8d965a6516c8..a9fe9181b010 100644 --- a/arch/arm/mach-omap2/board-zoom3.c +++ b/arch/arm/mach-omap2/board-zoom3.c @@ -21,6 +21,7 @@ #include <plat/common.h> #include <plat/board.h> +#include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" static void __init omap_zoom_map_io(void) @@ -42,8 +43,17 @@ static void __init omap_zoom_init_irq(void) omap_gpio_init(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); zoom_debugboard_init(); } diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 4716206547ac..759c72a48f7f 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -70,9 +70,41 @@ u8 cpu_mask; /*------------------------------------------------------------------------- - * OMAP2/3 specific clock functions + * OMAP2/3/4 specific clock functions *-------------------------------------------------------------------------*/ +void omap2_init_dpll_parent(struct clk *clk) +{ + u32 v; + struct dpll_data *dd; + + dd = clk->dpll_data; + if (!dd) + return; + + /* Return bypass rate if DPLL is bypassed */ + v = __raw_readl(dd->control_reg); + v &= dd->enable_mask; + v >>= __ffs(dd->enable_mask); + + /* Reparent in case the dpll is in bypass */ + if (cpu_is_omap24xx()) { + if (v == OMAP2XXX_EN_DPLL_LPBYPASS || + v == OMAP2XXX_EN_DPLL_FRBYPASS) + clk_reparent(clk, dd->clk_bypass); + } else if (cpu_is_omap34xx()) { + if (v == OMAP3XXX_EN_DPLL_LPBYPASS || + v == OMAP3XXX_EN_DPLL_FRBYPASS) + clk_reparent(clk, dd->clk_bypass); + } else if (cpu_is_omap44xx()) { + if (v == OMAP4XXX_EN_DPLL_LPBYPASS || + v == OMAP4XXX_EN_DPLL_FRBYPASS || + v == OMAP4XXX_EN_DPLL_MNBYPASS) + clk_reparent(clk, dd->clk_bypass); + } + return; +} + /** * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware * @clk: struct clk * @@ -149,6 +181,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n) * clockdomain pointer, and save it into the struct clk. Intended to be * called during clk_register(). No return value. */ +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ void omap2_init_clk_clkdm(struct clk *clk) { struct clockdomain *clkdm; @@ -166,6 +199,7 @@ void omap2_init_clk_clkdm(struct clk *clk) "clkdm %s\n", clk->name, clk->clkdm_name); } } +#endif /** * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware @@ -247,6 +281,11 @@ u32 omap2_get_dpll_rate(struct clk *clk) if (v == OMAP3XXX_EN_DPLL_LPBYPASS || v == OMAP3XXX_EN_DPLL_FRBYPASS) return dd->clk_bypass->rate; + } else if (cpu_is_omap44xx()) { + if (v == OMAP4XXX_EN_DPLL_LPBYPASS || + v == OMAP4XXX_EN_DPLL_FRBYPASS || + v == OMAP4XXX_EN_DPLL_MNBYPASS) + return dd->clk_bypass->rate; } v = __raw_readl(dd->mult_div1_reg); @@ -437,8 +476,10 @@ void omap2_clk_disable(struct clk *clk) _omap2_clk_disable(clk); if (clk->parent) omap2_clk_disable(clk->parent); +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); +#endif } } @@ -448,8 +489,10 @@ int omap2_clk_enable(struct clk *clk) int ret = 0; if (clk->usecount++ == 0) { +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_enable(clk->clkdm, clk); +#endif if (clk->parent) { ret = omap2_clk_enable(clk->parent); @@ -468,8 +511,10 @@ int omap2_clk_enable(struct clk *clk) return ret; err: +#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */ if (clk->clkdm) omap2_clkdm_clk_disable(clk->clkdm, clk); +#endif clk->usecount--; return ret; } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 43b6bedaafd6..93c48df3b5b1 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -1,8 +1,8 @@ /* * linux/arch/arm/mach-omap2/clock.h * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation * * Contacts: * Richard Woodruff <r-woodruff2@ti.com> @@ -36,6 +36,17 @@ #define OMAP3XXX_EN_DPLL_FRBYPASS 0x6 #define OMAP3XXX_EN_DPLL_LOCKED 0x7 +/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */ +#define OMAP4XXX_EN_DPLL_MNBYPASS 0x4 +#define OMAP4XXX_EN_DPLL_LPBYPASS 0x5 +#define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 +#define OMAP4XXX_EN_DPLL_LOCKED 0x7 + +/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ +#define DPLL_LOW_POWER_STOP 0x1 +#define DPLL_LOW_POWER_BYPASS 0x5 +#define DPLL_LOCKED 0x7 + int omap2_clk_init(void); int omap2_clk_enable(struct clk *clk); void omap2_clk_disable(struct clk *clk); @@ -44,6 +55,14 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate); int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent); int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance); long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate); +unsigned long omap3_dpll_recalc(struct clk *clk); +unsigned long omap3_clkoutx2_recalc(struct clk *clk); +void omap3_dpll_allow_idle(struct clk *clk); +void omap3_dpll_deny_idle(struct clk *clk); +u32 omap3_dpll_autoidle_read(struct clk *clk); +int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); +int omap3_noncore_dpll_enable(struct clk *clk); +void omap3_noncore_dpll_disable(struct clk *clk); #ifdef CONFIG_OMAP_RESET_CLOCKS void omap2_clk_disable_unused(struct clk *clk); @@ -63,6 +82,7 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk); long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate); int omap2_clksel_set_rate(struct clk *clk, unsigned long rate); u32 omap2_get_dpll_rate(struct clk *clk); +void omap2_init_dpll_parent(struct clk *clk); int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name); void omap2_clk_prepare_for_reboot(void); int omap2_dflt_clk_enable(struct clk *clk); @@ -72,29 +92,17 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, u8 *idlest_bit); +extern u8 cpu_mask; + extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; -extern u8 cpu_mask; +extern struct clk_functions omap2_clk_functions; +extern struct clk *vclk, *sclk; -/* clksel_rate data common to 24xx/343x */ -static const struct clksel_rate gpt_32k_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate gpt_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate gfx_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X }, - { .div = 0 } -}; +extern const struct clksel_rate gpt_32k_rates[]; +extern const struct clksel_rate gpt_sys_rates[]; +extern const struct clksel_rate gfx_l3_rates[]; #endif diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c deleted file mode 100644 index 845b478ebeee..000000000000 --- a/arch/arm/mach-omap2/clock24xx.c +++ /dev/null @@ -1,805 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/clock.c - * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation - * - * Contacts: - * Richard Woodruff <r-woodruff2@ti.com> - * Paul Walmsley - * - * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, - * Gordon McNutt and RidgeRun, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#undef DEBUG - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/device.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/cpufreq.h> -#include <linux/bitops.h> - -#include <plat/clock.h> -#include <plat/sram.h> -#include <plat/prcm.h> -#include <asm/div64.h> -#include <asm/clkdev.h> - -#include <plat/sdrc.h> -#include "clock.h" -#include "prm.h" -#include "prm-regbits-24xx.h" -#include "cm.h" -#include "cm-regbits-24xx.h" - -static const struct clkops clkops_oscck; -static const struct clkops clkops_fixed; - -static void omap2430_clk_i2chs_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); - -/* 2430 I2CHS has non-standard IDLEST register */ -static const struct clkops clkops_omap2430_i2chs_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap2430_clk_i2chs_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -#include "clock24xx.h" - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_243X RATE_IN_243X -#define CK_242X RATE_IN_242X - -static struct omap_clk omap24xx_clks[] = { - /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), - CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), - CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), - CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), - /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), - /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), - CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), - CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), - CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), - CLK(NULL, "emul_ck", &emul_ck, CK_242X), - /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), - /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), - CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), - CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), - CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), - CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), - CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), - /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), - /* Modem domain clocks */ - CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), - CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), - /* DSS domain clocks */ - CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X), - CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), - /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), - /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), - /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), - /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), - CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), - CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), - CLK(NULL, "icr_ick", &icr_ick, CK_243X), - CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), - CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), - CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), - CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), - CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), - CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), - CLK(NULL, "eac_ick", &eac_ick, CK_242X), - CLK(NULL, "eac_fck", &eac_fck, CK_242X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), - CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), - CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), - CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), - CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), - CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), - CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), - CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), - CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), - CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), - CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), - CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), - CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), - CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), - CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), - CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), - CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), - CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), - CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), - CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), - CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), - CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), - CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), - CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), -}; - -/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ -#define EN_APLL_STOPPED 0 -#define EN_APLL_LOCKED 3 - -/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ -#define APLLS_CLKIN_19_2MHZ 0 -#define APLLS_CLKIN_13MHZ 2 -#define APLLS_CLKIN_12MHZ 3 - -/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ - -static struct prcm_config *curr_prcm_set; -static struct clk *vclk; -static struct clk *sclk; - -static void __iomem *prcm_clksrc_ctrl; - -/*------------------------------------------------------------------------- - * Omap24xx specific clock functions - *-------------------------------------------------------------------------*/ - -/** - * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS - * @clk: struct clk * being enabled - * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into - * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into - * - * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the - * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function - * passes back the correct CM_IDLEST register address for I2CHS - * modules. No return value. - */ -static void omap2430_clk_i2chs_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit) -{ - *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); - *idlest_bit = clk->enable_bit; -} - - -/** - * omap2xxx_clk_get_core_rate - return the CORE_CLK rate - * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") - * - * Returns the CORE_CLK rate. CORE_CLK can have one of three rate - * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz - * (the latter is unusual). This currently should be called with - * struct clk *dpll_ck, which is a composite clock of dpll_ck and - * core_ck. - */ -static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) -{ - long long core_clk; - u32 v; - - core_clk = omap2_get_dpll_rate(clk); - - v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - v &= OMAP24XX_CORE_CLK_SRC_MASK; - - if (v == CORE_CLK_SRC_32K) - core_clk = 32768; - else - core_clk *= v; - - return core_clk; -} - -static int omap2_enable_osc_ck(struct clk *clk) -{ - u32 pcc; - - pcc = __raw_readl(prcm_clksrc_ctrl); - - __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); - - return 0; -} - -static void omap2_disable_osc_ck(struct clk *clk) -{ - u32 pcc; - - pcc = __raw_readl(prcm_clksrc_ctrl); - - __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); -} - -static const struct clkops clkops_oscck = { - .enable = &omap2_enable_osc_ck, - .disable = &omap2_disable_osc_ck, -}; - -#ifdef OLD_CK -/* Recalculate SYST_CLK */ -static void omap2_sys_clk_recalc(struct clk * clk) -{ - u32 div = PRCM_CLKSRC_CTRL; - div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ - div >>= clk->rate_offset; - clk->rate = (clk->parent->rate / div); - propagate_rate(clk); -} -#endif /* OLD_CK */ - -/* Enable an APLL if off */ -static int omap2_clk_fixed_enable(struct clk *clk) -{ - u32 cval, apll_mask; - - apll_mask = EN_APLL_LOCKED << clk->enable_bit; - - cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); - - if ((cval & apll_mask) == apll_mask) - return 0; /* apll already enabled */ - - cval &= ~apll_mask; - cval |= apll_mask; - cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); - - if (clk == &apll96_ck) - cval = OMAP24XX_ST_96M_APLL; - else if (clk == &apll54_ck) - cval = OMAP24XX_ST_54M_APLL; - - omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval, - clk->name); - - /* - * REVISIT: Should we return an error code if omap2_wait_clock_ready() - * fails? - */ - return 0; -} - -/* Stop APLL */ -static void omap2_clk_fixed_disable(struct clk *clk) -{ - u32 cval; - - cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); - cval &= ~(EN_APLL_LOCKED << clk->enable_bit); - cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); -} - -static const struct clkops clkops_fixed = { - .enable = &omap2_clk_fixed_enable, - .disable = &omap2_clk_fixed_disable, -}; - -/* - * Uses the current prcm set to tell if a rate is valid. - * You can go slower, but not faster within a given rate set. - */ -static long omap2_dpllcore_round_rate(unsigned long target_rate) -{ - u32 high, low, core_clk_src; - - core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK; - - if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */ - high = curr_prcm_set->dpll_speed * 2; - low = curr_prcm_set->dpll_speed; - } else { /* DPLL clockout x 2 */ - high = curr_prcm_set->dpll_speed; - low = curr_prcm_set->dpll_speed / 2; - } - -#ifdef DOWN_VARIABLE_DPLL - if (target_rate > high) - return high; - else - return target_rate; -#else - if (target_rate > low) - return high; - else - return low; -#endif - -} - -static unsigned long omap2_dpllcore_recalc(struct clk *clk) -{ - return omap2xxx_clk_get_core_rate(clk); -} - -static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) -{ - u32 cur_rate, low, mult, div, valid_rate, done_rate; - u32 bypass = 0; - struct prcm_config tmpset; - const struct dpll_data *dd; - - cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); - mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - mult &= OMAP24XX_CORE_CLK_SRC_MASK; - - if ((rate == (cur_rate / 2)) && (mult == 2)) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); - } else if ((rate == (cur_rate * 2)) && (mult == 1)) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - } else if (rate != cur_rate) { - valid_rate = omap2_dpllcore_round_rate(rate); - if (valid_rate != rate) - return -EINVAL; - - if (mult == 1) - low = curr_prcm_set->dpll_speed; - else - low = curr_prcm_set->dpll_speed / 2; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); - tmpset.cm_clksel1_pll &= ~(dd->mult_mask | - dd->div1_mask); - div = ((curr_prcm_set->xtal_speed / 1000000) - 1); - tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); - tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK; - if (rate > low) { - tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2; - mult = ((rate / 2) / 1000000); - done_rate = CORE_CLK_SRC_DPLL_X2; - } else { - tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL; - mult = (rate / 1000000); - done_rate = CORE_CLK_SRC_DPLL; - } - tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask)); - tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask)); - - /* Worst case */ - tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS; - - if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ - bypass = 1; - - /* For omap2xxx_sdrc_init_params() */ - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - - /* Force dll lock mode */ - omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, - bypass); - - /* Errata: ret dll entry state */ - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); - omap2xxx_sdrc_reprogram(done_rate, 0); - } - - return 0; -} - -/** - * omap2_table_mpu_recalc - just return the MPU speed - * @clk: virt_prcm_set struct clk - * - * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. - */ -static unsigned long omap2_table_mpu_recalc(struct clk *clk) -{ - return curr_prcm_set->mpu_speed; -} - -/* - * Look for a rate equal or less than the target rate given a configuration set. - * - * What's not entirely clear is "which" field represents the key field. - * Some might argue L3-DDR, others ARM, others IVA. This code is simple and - * just uses the ARM rates. - */ -static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) -{ - struct prcm_config *ptr; - long highest_rate; - - if (clk != &virt_prcm_set) - return -EINVAL; - - highest_rate = -EINVAL; - - for (ptr = rate_table; ptr->mpu_speed; ptr++) { - if (!(ptr->flags & cpu_mask)) - continue; - if (ptr->xtal_speed != sys_ck.rate) - continue; - - highest_rate = ptr->mpu_speed; - - /* Can check only after xtal frequency check */ - if (ptr->mpu_speed <= rate) - break; - } - return highest_rate; -} - -/* Sets basic clocks based on the specified rate */ -static int omap2_select_table_rate(struct clk *clk, unsigned long rate) -{ - u32 cur_rate, done_rate, bypass = 0, tmp; - struct prcm_config *prcm; - unsigned long found_speed = 0; - unsigned long flags; - - if (clk != &virt_prcm_set) - return -EINVAL; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - - if (prcm->xtal_speed != sys_ck.rate) - continue; - - if (prcm->mpu_speed <= rate) { - found_speed = prcm->mpu_speed; - break; - } - } - - if (!found_speed) { - printk(KERN_INFO "Could not set MPU rate to %luMHz\n", - rate / 1000000); - return -EINVAL; - } - - curr_prcm_set = prcm; - cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); - - if (prcm->dpll_speed == cur_rate / 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); - } else if (prcm->dpll_speed == cur_rate * 2) { - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - } else if (prcm->dpll_speed != cur_rate) { - local_irq_save(flags); - - if (prcm->dpll_speed == prcm->xtal_speed) - bypass = 1; - - if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == - CORE_CLK_SRC_DPLL_X2) - done_rate = CORE_CLK_SRC_DPLL_X2; - else - done_rate = CORE_CLK_SRC_DPLL; - - /* MPU divider */ - cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); - - /* dsp + iva1 div(2420), iva2.1(2430) */ - cm_write_mod_reg(prcm->cm_clksel_dsp, - OMAP24XX_DSP_MOD, CM_CLKSEL); - - cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); - - /* Major subsystem dividers */ - tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; - cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, - CM_CLKSEL1); - - if (cpu_is_omap2430()) - cm_write_mod_reg(prcm->cm_clksel_mdm, - OMAP2430_MDM_MOD, CM_CLKSEL); - - /* x2 to enter omap2xxx_sdrc_init_params() */ - omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); - - omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, - bypass); - - omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); - omap2xxx_sdrc_reprogram(done_rate, 0); - - local_irq_restore(flags); - } - - return 0; -} - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - */ -static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - struct prcm_config *prcm; - int i = 0; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - if (i == 0) { - printk(KERN_WARNING "%s: failed to initialize frequency " - "table\n", __func__); - return; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} -#endif - -static struct clk_functions omap2_clk_functions = { - .clk_enable = omap2_clk_enable, - .clk_disable = omap2_clk_disable, - .clk_round_rate = omap2_clk_round_rate, - .clk_set_rate = omap2_clk_set_rate, - .clk_set_parent = omap2_clk_set_parent, - .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, -#endif -}; - -static u32 omap2_get_apll_clkin(void) -{ - u32 aplls, srate = 0; - - aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); - aplls &= OMAP24XX_APLLS_CLKIN_MASK; - aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; - - if (aplls == APLLS_CLKIN_19_2MHZ) - srate = 19200000; - else if (aplls == APLLS_CLKIN_13MHZ) - srate = 13000000; - else if (aplls == APLLS_CLKIN_12MHZ) - srate = 12000000; - - return srate; -} - -static u32 omap2_get_sysclkdiv(void) -{ - u32 div; - - div = __raw_readl(prcm_clksrc_ctrl); - div &= OMAP_SYSCLKDIV_MASK; - div >>= OMAP_SYSCLKDIV_SHIFT; - - return div; -} - -static unsigned long omap2_osc_clk_recalc(struct clk *clk) -{ - return omap2_get_apll_clkin() * omap2_get_sysclkdiv(); -} - -static unsigned long omap2_sys_clk_recalc(struct clk *clk) -{ - return clk->parent->rate / omap2_get_sysclkdiv(); -} - -/* - * Set clocks for bypass mode for reboot to work. - */ -void omap2_clk_prepare_for_reboot(void) -{ - u32 rate; - - if (vclk == NULL || sclk == NULL) - return; - - rate = clk_get_rate(sclk); - clk_set_rate(vclk, rate); -} - -/* - * Switch the MPU rate if specified on cmdline. - * We cannot do this early until cmdline is parsed. - */ -static int __init omap2_clk_arch_init(void) -{ - if (!mpurate) - return -EINVAL; - - if (clk_set_rate(&virt_prcm_set, mpurate)) - printk(KERN_ERR "Could not find matching MPU rate\n"); - - recalculate_root_clocks(); - - printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; - - return 0; -} -arch_initcall(omap2_clk_arch_init); - -int __init omap2_clk_init(void) -{ - struct prcm_config *prcm; - struct omap_clk *c; - u32 clkrate; - - if (cpu_is_omap242x()) { - prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; - cpu_mask = RATE_IN_242X; - } else if (cpu_is_omap2430()) { - prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; - cpu_mask = RATE_IN_243X; - } - - clk_init(&omap2_clk_functions); - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_preinit(c->lk.clk); - - osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); - propagate_rate(&osc_ck); - sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); - propagate_rate(&sys_ck); - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - if (c->cpu & cpu_mask) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - omap2_init_clk_clkdm(c->lk.clk); - } - - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; - - recalculate_root_clocks(); - - printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable_init_clocks(); - - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - - return 0; -} diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c new file mode 100644 index 000000000000..d0e3fb7f9298 --- /dev/null +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -0,0 +1,587 @@ +/* + * linux/arch/arm/mach-omap2/clock.c + * + * Copyright (C) 2005-2008 Texas Instruments, Inc. + * Copyright (C) 2004-2008 Nokia Corporation + * + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley + * + * Based on earlier work by Tuukka Tikkanen, Tony Lindgren, + * Gordon McNutt and RidgeRun, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#undef DEBUG + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/cpufreq.h> +#include <linux/bitops.h> + +#include <plat/clock.h> +#include <plat/sram.h> +#include <plat/prcm.h> +#include <plat/clkdev_omap.h> +#include <asm/div64.h> +#include <asm/clkdev.h> + +#include <plat/sdrc.h> +#include "clock.h" +#include "clock2xxx.h" +#include "opp2xxx.h" +#include "prm.h" +#include "prm-regbits-24xx.h" +#include "cm.h" +#include "cm-regbits-24xx.h" + + +/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ +#define EN_APLL_STOPPED 0 +#define EN_APLL_LOCKED 3 + +/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */ +#define APLLS_CLKIN_19_2MHZ 0 +#define APLLS_CLKIN_13MHZ 2 +#define APLLS_CLKIN_12MHZ 3 + +/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ + +const struct prcm_config *curr_prcm_set; +const struct prcm_config *rate_table; + +struct clk *vclk, *sclk, *dclk; + +void __iomem *prcm_clksrc_ctrl; + +/*------------------------------------------------------------------------- + * Omap24xx specific clock functions + *-------------------------------------------------------------------------*/ + +/** + * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS + * @clk: struct clk * being enabled + * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into + * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into + * + * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the + * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE. This custom function + * passes back the correct CM_IDLEST register address for I2CHS + * modules. No return value. + */ +static void omap2430_clk_i2chs_find_idlest(struct clk *clk, + void __iomem **idlest_reg, + u8 *idlest_bit) +{ + *idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST); + *idlest_bit = clk->enable_bit; +} + +/* 2430 I2CHS has non-standard IDLEST register */ +const struct clkops clkops_omap2430_i2chs_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap2430_clk_i2chs_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + +/** + * omap2xxx_clk_get_core_rate - return the CORE_CLK rate + * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck") + * + * Returns the CORE_CLK rate. CORE_CLK can have one of three rate + * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz + * (the latter is unusual). This currently should be called with + * struct clk *dpll_ck, which is a composite clock of dpll_ck and + * core_ck. + */ +unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) +{ + long long core_clk; + u32 v; + + core_clk = omap2_get_dpll_rate(clk); + + v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + v &= OMAP24XX_CORE_CLK_SRC_MASK; + + if (v == CORE_CLK_SRC_32K) + core_clk = 32768; + else + core_clk *= v; + + return core_clk; +} + +static int omap2_enable_osc_ck(struct clk *clk) +{ + u32 pcc; + + pcc = __raw_readl(prcm_clksrc_ctrl); + + __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); + + return 0; +} + +static void omap2_disable_osc_ck(struct clk *clk) +{ + u32 pcc; + + pcc = __raw_readl(prcm_clksrc_ctrl); + + __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); +} + +const struct clkops clkops_oscck = { + .enable = omap2_enable_osc_ck, + .disable = omap2_disable_osc_ck, +}; + +#ifdef OLD_CK +/* Recalculate SYST_CLK */ +static void omap2_sys_clk_recalc(struct clk *clk) +{ + u32 div = PRCM_CLKSRC_CTRL; + div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ + div >>= clk->rate_offset; + clk->rate = (clk->parent->rate / div); + propagate_rate(clk); +} +#endif /* OLD_CK */ + +/* Enable an APLL if off */ +static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask) +{ + u32 cval, apll_mask; + + apll_mask = EN_APLL_LOCKED << clk->enable_bit; + + cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); + + if ((cval & apll_mask) == apll_mask) + return 0; /* apll already enabled */ + + cval &= ~apll_mask; + cval |= apll_mask; + cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); + + omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask, + clk->name); + + /* + * REVISIT: Should we return an error code if omap2_wait_clock_ready() + * fails? + */ + return 0; +} + +static int omap2_clk_apll96_enable(struct clk *clk) +{ + return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL); +} + +static int omap2_clk_apll54_enable(struct clk *clk) +{ + return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL); +} + +/* Stop APLL */ +static void omap2_clk_apll_disable(struct clk *clk) +{ + u32 cval; + + cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN); + cval &= ~(EN_APLL_LOCKED << clk->enable_bit); + cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); +} + +const struct clkops clkops_apll96 = { + .enable = omap2_clk_apll96_enable, + .disable = omap2_clk_apll_disable, +}; + +const struct clkops clkops_apll54 = { + .enable = omap2_clk_apll54_enable, + .disable = omap2_clk_apll_disable, +}; + +/* + * Uses the current prcm set to tell if a rate is valid. + * You can go slower, but not faster within a given rate set. + */ +long omap2_dpllcore_round_rate(unsigned long target_rate) +{ + u32 high, low, core_clk_src; + + core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK; + + if (core_clk_src == CORE_CLK_SRC_DPLL) { /* DPLL clockout */ + high = curr_prcm_set->dpll_speed * 2; + low = curr_prcm_set->dpll_speed; + } else { /* DPLL clockout x 2 */ + high = curr_prcm_set->dpll_speed; + low = curr_prcm_set->dpll_speed / 2; + } + +#ifdef DOWN_VARIABLE_DPLL + if (target_rate > high) + return high; + else + return target_rate; +#else + if (target_rate > low) + return high; + else + return low; +#endif + +} + +unsigned long omap2_dpllcore_recalc(struct clk *clk) +{ + return omap2xxx_clk_get_core_rate(clk); +} + +int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) +{ + u32 cur_rate, low, mult, div, valid_rate, done_rate; + u32 bypass = 0; + struct prcm_config tmpset; + const struct dpll_data *dd; + + cur_rate = omap2xxx_clk_get_core_rate(dclk); + mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + mult &= OMAP24XX_CORE_CLK_SRC_MASK; + + if ((rate == (cur_rate / 2)) && (mult == 2)) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); + } else if ((rate == (cur_rate * 2)) && (mult == 1)) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + } else if (rate != cur_rate) { + valid_rate = omap2_dpllcore_round_rate(rate); + if (valid_rate != rate) + return -EINVAL; + + if (mult == 1) + low = curr_prcm_set->dpll_speed; + else + low = curr_prcm_set->dpll_speed / 2; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg); + tmpset.cm_clksel1_pll &= ~(dd->mult_mask | + dd->div1_mask); + div = ((curr_prcm_set->xtal_speed / 1000000) - 1); + tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); + tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK; + if (rate > low) { + tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2; + mult = ((rate / 2) / 1000000); + done_rate = CORE_CLK_SRC_DPLL_X2; + } else { + tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL; + mult = (rate / 1000000); + done_rate = CORE_CLK_SRC_DPLL; + } + tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask)); + tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask)); + + /* Worst case */ + tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS; + + if (rate == curr_prcm_set->xtal_speed) /* If asking for 1-1 */ + bypass = 1; + + /* For omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + + /* Force dll lock mode */ + omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr, + bypass); + + /* Errata: ret dll entry state */ + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); + } + + return 0; +} + +/** + * omap2_table_mpu_recalc - just return the MPU speed + * @clk: virt_prcm_set struct clk + * + * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. + */ +unsigned long omap2_table_mpu_recalc(struct clk *clk) +{ + return curr_prcm_set->mpu_speed; +} + +/* + * Look for a rate equal or less than the target rate given a configuration set. + * + * What's not entirely clear is "which" field represents the key field. + * Some might argue L3-DDR, others ARM, others IVA. This code is simple and + * just uses the ARM rates. + */ +long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) +{ + const struct prcm_config *ptr; + long highest_rate; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); + + highest_rate = -EINVAL; + + for (ptr = rate_table; ptr->mpu_speed; ptr++) { + if (!(ptr->flags & cpu_mask)) + continue; + if (ptr->xtal_speed != sys_ck_rate) + continue; + + highest_rate = ptr->mpu_speed; + + /* Can check only after xtal frequency check */ + if (ptr->mpu_speed <= rate) + break; + } + return highest_rate; +} + +/* Sets basic clocks based on the specified rate */ +int omap2_select_table_rate(struct clk *clk, unsigned long rate) +{ + u32 cur_rate, done_rate, bypass = 0, tmp; + const struct prcm_config *prcm; + unsigned long found_speed = 0; + unsigned long flags; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + + if (prcm->xtal_speed != sys_ck_rate) + continue; + + if (prcm->mpu_speed <= rate) { + found_speed = prcm->mpu_speed; + break; + } + } + + if (!found_speed) { + printk(KERN_INFO "Could not set MPU rate to %luMHz\n", + rate / 1000000); + return -EINVAL; + } + + curr_prcm_set = prcm; + cur_rate = omap2xxx_clk_get_core_rate(dclk); + + if (prcm->dpll_speed == cur_rate / 2) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); + } else if (prcm->dpll_speed == cur_rate * 2) { + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + } else if (prcm->dpll_speed != cur_rate) { + local_irq_save(flags); + + if (prcm->dpll_speed == prcm->xtal_speed) + bypass = 1; + + if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) == + CORE_CLK_SRC_DPLL_X2) + done_rate = CORE_CLK_SRC_DPLL_X2; + else + done_rate = CORE_CLK_SRC_DPLL; + + /* MPU divider */ + cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL); + + /* dsp + iva1 div(2420), iva2.1(2430) */ + cm_write_mod_reg(prcm->cm_clksel_dsp, + OMAP24XX_DSP_MOD, CM_CLKSEL); + + cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL); + + /* Major subsystem dividers */ + tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK; + cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD, + CM_CLKSEL1); + + if (cpu_is_omap2430()) + cm_write_mod_reg(prcm->cm_clksel_mdm, + OMAP2430_MDM_MOD, CM_CLKSEL); + + /* x2 to enter omap2xxx_sdrc_init_params() */ + omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1); + + omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr, + bypass); + + omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked()); + omap2xxx_sdrc_reprogram(done_rate, 0); + + local_irq_restore(flags); + } + + return 0; +} + +#ifdef CONFIG_CPU_FREQ +/* + * Walk PRCM rate table and fillout cpufreq freq_table + */ +static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)]; + +void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) +{ + struct prcm_config *prcm; + int i = 0; + + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + + /* don't put bypass rates in table */ + if (prcm->dpll_speed == prcm->xtal_speed) + continue; + + freq_table[i].index = i; + freq_table[i].frequency = prcm->mpu_speed / 1000; + i++; + } + + if (i == 0) { + printk(KERN_WARNING "%s: failed to initialize frequency " + "table\n", __func__); + return; + } + + freq_table[i].index = i; + freq_table[i].frequency = CPUFREQ_TABLE_END; + + *table = &freq_table[0]; +} +#endif + +struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, +#ifdef CONFIG_CPU_FREQ + .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, +#endif +}; + +static u32 omap2_get_apll_clkin(void) +{ + u32 aplls, srate = 0; + + aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1); + aplls &= OMAP24XX_APLLS_CLKIN_MASK; + aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT; + + if (aplls == APLLS_CLKIN_19_2MHZ) + srate = 19200000; + else if (aplls == APLLS_CLKIN_13MHZ) + srate = 13000000; + else if (aplls == APLLS_CLKIN_12MHZ) + srate = 12000000; + + return srate; +} + +static u32 omap2_get_sysclkdiv(void) +{ + u32 div; + + div = __raw_readl(prcm_clksrc_ctrl); + div &= OMAP_SYSCLKDIV_MASK; + div >>= OMAP_SYSCLKDIV_SHIFT; + + return div; +} + +unsigned long omap2_osc_clk_recalc(struct clk *clk) +{ + return omap2_get_apll_clkin() * omap2_get_sysclkdiv(); +} + +unsigned long omap2_sys_clk_recalc(struct clk *clk) +{ + return clk->parent->rate / omap2_get_sysclkdiv(); +} + +/* + * Set clocks for bypass mode for reboot to work. + */ +void omap2_clk_prepare_for_reboot(void) +{ + u32 rate; + + if (vclk == NULL || sclk == NULL) + return; + + rate = clk_get_rate(sclk); + clk_set_rate(vclk, rate); +} + +/* + * Switch the MPU rate if specified on cmdline. + * We cannot do this early until cmdline is parsed. + */ +static int __init omap2_clk_arch_init(void) +{ + struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck; + unsigned long sys_ck_rate; + + if (!mpurate) + return -EINVAL; + + virt_prcm_set = clk_get(NULL, "virt_prcm_set"); + sys_ck = clk_get(NULL, "sys_ck"); + dpll_ck = clk_get(NULL, "dpll_ck"); + mpu_ck = clk_get(NULL, "mpu_ck"); + + if (clk_set_rate(virt_prcm_set, mpurate)) + printk(KERN_ERR "Could not find matching MPU rate\n"); + + recalculate_root_clocks(); + + sys_ck_rate = clk_get_rate(sys_ck); + + pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10, + (clk_get_rate(dpll_ck) / 1000000), + (clk_get_rate(mpu_ck) / 1000000)); + + return 0; +} +arch_initcall(omap2_clk_arch_init); + + diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h new file mode 100644 index 000000000000..e35efde4bd80 --- /dev/null +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -0,0 +1,41 @@ +/* + * OMAP2 clock function prototypes and macros + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H + +unsigned long omap2_table_mpu_recalc(struct clk *clk); +int omap2_select_table_rate(struct clk *clk, unsigned long rate); +long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); +unsigned long omap2_sys_clk_recalc(struct clk *clk); +unsigned long omap2_osc_clk_recalc(struct clk *clk); +unsigned long omap2_sys_clk_recalc(struct clk *clk); +unsigned long omap2_dpllcore_recalc(struct clk *clk); +int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); +unsigned long omap2xxx_clk_get_core_rate(struct clk *clk); + +/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ +#ifdef CONFIG_ARCH_OMAP2420 +#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL +#else +#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL +#endif + +extern void __iomem *prcm_clksrc_ctrl; + +extern struct clk *dclk; + +extern const struct clkops clkops_omap2430_i2chs_wait; +extern const struct clkops clkops_oscck; +extern const struct clkops clkops_apll96; +extern const struct clkops clkops_apll54; + +#endif diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock2xxx_data.c index d19cf7a7d8db..97dc7cf7751d 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock2xxx_data.c @@ -1,8 +1,8 @@ /* - * linux/arch/arm/mach-omap2/clock24xx.h + * linux/arch/arm/mach-omap2/clock2xxx_data.c * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation * * Contacts: * Richard Woodruff <r-woodruff2@ti.com> @@ -13,600 +13,21 @@ * published by the Free Software Foundation. */ -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/clk.h> -#include "clock.h" +#include <plat/clkdev_omap.h> +#include "clock.h" +#include "clock2xxx.h" +#include "opp2xxx.h" #include "prm.h" #include "cm.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" -/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ -#ifdef CONFIG_ARCH_OMAP2420 -#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL -#else -#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL -#endif - -static unsigned long omap2_table_mpu_recalc(struct clk *clk); -static int omap2_select_table_rate(struct clk *clk, unsigned long rate); -static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); -static unsigned long omap2_sys_clk_recalc(struct clk *clk); -static unsigned long omap2_osc_clk_recalc(struct clk *clk); -static unsigned long omap2_sys_clk_recalc(struct clk *clk); -static unsigned long omap2_dpllcore_recalc(struct clk *clk); -static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); - -/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP - * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM - */ -struct prcm_config { - unsigned long xtal_speed; /* crystal rate */ - unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ - unsigned long mpu_speed; /* speed of MPU */ - unsigned long cm_clksel_mpu; /* mpu divider */ - unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ - unsigned long cm_clksel_gfx; /* gfx dividers */ - unsigned long cm_clksel1_core; /* major subsystem dividers */ - unsigned long cm_clksel1_pll; /* m,n */ - unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ - unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ - unsigned long base_sdrc_rfr; /* base refresh timing for a set */ - unsigned char flags; -}; - -/* - * The OMAP2 processor can be run at several discrete 'PRCM configurations'. - * These configurations are characterized by voltage and speed for clocks. - * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with - * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. - * - * 2430 differs from 2420 in that there are no more phase synchronizers used. - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs - * 2430 (iva2.1, NOdsp, mdm) - */ - -/* Core fields for cm_clksel, not ratio governed */ -#define RX_CLKSEL_DSS1 (0x10 << 8) -#define RX_CLKSEL_DSS2 (0x0 << 13) -#define RX_CLKSEL_SSI (0x5 << 20) - -/*------------------------------------------------------------------------- - * Voltage/DPLL ratios - *-------------------------------------------------------------------------*/ - -/* 2430 Ratio's, 2430-Ratio Config 1 */ -#define R1_CLKSEL_L3 (4 << 0) -#define R1_CLKSEL_L4 (2 << 5) -#define R1_CLKSEL_USB (4 << 25) -#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R1_CLKSEL_L4 | R1_CLKSEL_L3 -#define R1_CLKSEL_MPU (2 << 0) -#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU -#define R1_CLKSEL_DSP (2 << 0) -#define R1_CLKSEL_DSP_IF (2 << 5) -#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF -#define R1_CLKSEL_GFX (2 << 0) -#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX -#define R1_CLKSEL_MDM (4 << 0) -#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM - -/* 2430-Ratio Config 2 */ -#define R2_CLKSEL_L3 (6 << 0) -#define R2_CLKSEL_L4 (2 << 5) -#define R2_CLKSEL_USB (2 << 25) -#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R2_CLKSEL_L4 | R2_CLKSEL_L3 -#define R2_CLKSEL_MPU (2 << 0) -#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU -#define R2_CLKSEL_DSP (2 << 0) -#define R2_CLKSEL_DSP_IF (3 << 5) -#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF -#define R2_CLKSEL_GFX (2 << 0) -#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX -#define R2_CLKSEL_MDM (6 << 0) -#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM - -/* 2430-Ratio Bootm (BYPASS) */ -#define RB_CLKSEL_L3 (1 << 0) -#define RB_CLKSEL_L4 (1 << 5) -#define RB_CLKSEL_USB (1 << 25) -#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RB_CLKSEL_L4 | RB_CLKSEL_L3 -#define RB_CLKSEL_MPU (1 << 0) -#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU -#define RB_CLKSEL_DSP (1 << 0) -#define RB_CLKSEL_DSP_IF (1 << 5) -#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF -#define RB_CLKSEL_GFX (1 << 0) -#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX -#define RB_CLKSEL_MDM (1 << 0) -#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM - -/* 2420 Ratio Equivalents */ -#define RXX_CLKSEL_VLYNQ (0x12 << 15) -#define RXX_CLKSEL_SSI (0x8 << 20) - -/* 2420-PRCM III 532MHz core */ -#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ -#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ -#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ -#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ - RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ - RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ - RIII_CLKSEL_L3 -#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ -#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU -#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ -#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ -#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ -#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ -#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ -#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ - RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ - RIII_CLKSEL_DSP -#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ -#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX - -/* 2420-PRCM II 600MHz core */ -#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ -#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ -#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ -#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RII_CLKSEL_L4 | RII_CLKSEL_L3 -#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ -#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU -#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ -#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ -#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ -#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ -#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ -#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ - RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ - RII_CLKSEL_DSP -#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ -#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX - -/* 2420-PRCM I 660MHz core */ -#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ -#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ -#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ -#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \ - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RI_CLKSEL_L4 | RI_CLKSEL_L3 -#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ -#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU -#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ -#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ -#define RI_SYNC_DSP (1 << 7) /* Activate sync */ -#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ -#define RI_SYNC_IVA (0 << 13) /* Bypass sync */ -#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \ - RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ - RI_CLKSEL_DSP -#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ -#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX - -/* 2420-PRCM VII (boot) */ -#define RVII_CLKSEL_L3 (1 << 0) -#define RVII_CLKSEL_L4 (1 << 5) -#define RVII_CLKSEL_DSS1 (1 << 8) -#define RVII_CLKSEL_DSS2 (0 << 13) -#define RVII_CLKSEL_VLYNQ (1 << 15) -#define RVII_CLKSEL_SSI (1 << 20) -#define RVII_CLKSEL_USB (1 << 25) - -#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ - RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ - RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 - -#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ -#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU - -#define RVII_CLKSEL_DSP (1 << 0) -#define RVII_CLKSEL_DSP_IF (1 << 5) -#define RVII_SYNC_DSP (0 << 7) -#define RVII_CLKSEL_IVA (1 << 8) -#define RVII_SYNC_IVA (0 << 13) -#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ - RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP - -#define RVII_CLKSEL_GFX (1 << 0) -#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX - -/*------------------------------------------------------------------------- - * 2430 Target modes: Along with each configuration the CPU has several - * modes which goes along with them. Modes mainly are the addition of - * describe DPLL combinations to go along with a ratio. - *-------------------------------------------------------------------------*/ - -/* Hardware governed */ -#define MX_48M_SRC (0 << 3) -#define MX_54M_SRC (0 << 5) -#define MX_APLLS_CLIKIN_12 (3 << 23) -#define MX_APLLS_CLIKIN_13 (2 << 23) -#define MX_APLLS_CLIKIN_19_2 (0 << 23) - -/* - * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed - * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz - */ -#define M5A_DPLL_MULT_12 (133 << 12) -#define M5A_DPLL_DIV_12 (5 << 8) -#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5A_DPLL_MULT_13 (61 << 12) -#define M5A_DPLL_DIV_13 (2 << 8) -#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5A_DPLL_MULT_19 (55 << 12) -#define M5A_DPLL_DIV_19 (3 << 8) -#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ -#define M5B_DPLL_MULT_12 (50 << 12) -#define M5B_DPLL_DIV_12 (2 << 8) -#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5B_DPLL_MULT_13 (200 << 12) -#define M5B_DPLL_DIV_13 (12 << 8) - -#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5B_DPLL_MULT_19 (125 << 12) -#define M5B_DPLL_DIV_19 (31 << 8) -#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* - * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz - */ -#define M4_DPLL_MULT_12 (133 << 12) -#define M4_DPLL_DIV_12 (3 << 8) -#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -#define M4_DPLL_MULT_13 (399 << 12) -#define M4_DPLL_DIV_13 (12 << 8) -#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -#define M4_DPLL_MULT_19 (145 << 12) -#define M4_DPLL_DIV_19 (6 << 8) -#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* - * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz - */ -#define M3_DPLL_MULT_12 (55 << 12) -#define M3_DPLL_DIV_12 (1 << 8) -#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M3_DPLL_MULT_13 (76 << 12) -#define M3_DPLL_DIV_13 (2 << 8) -#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M3_DPLL_MULT_19 (17 << 12) -#define M3_DPLL_DIV_19 (0 << 8) -#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* - * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz - */ -#define M2_DPLL_MULT_12 (55 << 12) -#define M2_DPLL_DIV_12 (1 << 8) -#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, - * relock time issue */ -/* Core frequency changed from 330/165 to 329/164 MHz*/ -#define M2_DPLL_MULT_13 (76 << 12) -#define M2_DPLL_DIV_13 (2 << 8) -#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -#define M2_DPLL_MULT_19 (17 << 12) -#define M2_DPLL_DIV_19 (0 << 8) -#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* boot (boot) */ -#define MB_DPLL_MULT (1 << 12) -#define MB_DPLL_DIV (0 << 8) -#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_12 - -#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_13 - -#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_19 - -/* - * 2430 - chassis (sedna) - * 165 (ratio1) same as above #2 - * 150 (ratio1) - * 133 (ratio2) same as above #4 - * 110 (ratio2) same as above #3 - * 104 (ratio2) - * boot (boot) - */ - -/* PRCM I target DPLL = 2*330MHz = 660MHz */ -#define MI_DPLL_MULT_12 (55 << 12) -#define MI_DPLL_DIV_12 (1 << 8) -#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -/* - * 2420 Equivalent - mode registers - * PRCM II , target DPLL = 2*300MHz = 600MHz - */ -#define MII_DPLL_MULT_12 (50 << 12) -#define MII_DPLL_DIV_12 (1 << 8) -#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MII_DPLL_MULT_13 (300 << 12) -#define MII_DPLL_DIV_13 (12 << 8) -#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM III target DPLL = 2*266 = 532MHz*/ -#define MIII_DPLL_MULT_12 (133 << 12) -#define MIII_DPLL_DIV_12 (5 << 8) -#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MIII_DPLL_MULT_13 (266 << 12) -#define MIII_DPLL_DIV_13 (12 << 8) -#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM VII (boot bypass) */ -#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL -#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL - -/* High and low operation value */ -#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) -#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) - -/* MPU speed defines */ -#define S12M 12000000 -#define S13M 13000000 -#define S19M 19200000 -#define S26M 26000000 -#define S100M 100000000 -#define S133M 133000000 -#define S150M 150000000 -#define S164M 164000000 -#define S165M 165000000 -#define S199M 199000000 -#define S200M 200000000 -#define S266M 266000000 -#define S300M 300000000 -#define S329M 329000000 -#define S330M 330000000 -#define S399M 399000000 -#define S400M 400000000 -#define S532M 532000000 -#define S600M 600000000 -#define S658M 658000000 -#define S660M 660000000 -#define S798M 798000000 - -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, - * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, - * CM_CLKSEL2_PLL, CM_CLKSEL_MDM - * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. - * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. - * - * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ -static struct prcm_config rate_table[] = { - /* PRCM I - FAST */ - {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, - RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, - RATE_IN_242X}, - - /* PRCM II - FAST */ - {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - FAST */ - {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM II - SLOW */ - {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - SLOW */ - {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM #4 - ratio2 (ES2.1) - FAST */ - {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - FAST */ - {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - FAST */ - {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - FAST */ - {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM #4 - ratio1 (ES2.1) - SLOW */ - {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - SLOW */ - {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - SLOW */ - {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - SLOW*/ - {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; - /*------------------------------------------------------------------------- * 24xx clock tree. * @@ -708,7 +129,7 @@ static struct clk dpll_ck = { static struct clk apll96_ck = { .name = "apll96_ck", - .ops = &clkops_fixed, + .ops = &clkops_apll96, .parent = &sys_ck, .rate = 96000000, .flags = RATE_FIXED | ENABLE_ON_INIT, @@ -719,7 +140,7 @@ static struct clk apll96_ck = { static struct clk apll54_ck = { .name = "apll54_ck", - .ops = &clkops_fixed, + .ops = &clkops_apll54, .parent = &sys_ck, .rate = 54000000, .flags = RATE_FIXED | ENABLE_ON_INIT, @@ -2653,5 +2074,236 @@ static struct clk virt_prcm_set = { .round_rate = &omap2_round_to_table_rate, }; -#endif + +/* + * clkdev integration + */ + +static struct omap_clk omap24xx_clks[] = { + /* external root sources */ + CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), + CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), + CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), + /* internal analog sources */ + CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), + CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), + CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), + /* internal prcm root sources */ + CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), + CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), + CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), + CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), + CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), + CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), + CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), + CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), + CLK(NULL, "emul_ck", &emul_ck, CK_242X), + /* mpu domain clocks */ + CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), + /* dsp domain clocks */ + CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), + CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), + CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), + CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), + CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), + CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), + /* GFX domain clocks */ + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), + /* Modem domain clocks */ + CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + /* DSS domain clocks */ + CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), + /* L3 domain clocks */ + CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), + /* L4 domain clocks */ + CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), + /* virtual meta-group clock */ + CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), + /* general l4 interface ck, multi-parent functional clk */ + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), + CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), + CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), + CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), + CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), + CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), + CLK(NULL, "icr_ick", &icr_ick, CK_243X), + CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), + CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), + CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), + CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), + CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), + CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), + CLK(NULL, "eac_ick", &eac_ick, CK_242X), + CLK(NULL, "eac_fck", &eac_fck, CK_242X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), + CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), + CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), + CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), + CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), + CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), + CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), + CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), + CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), + CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), + CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), + CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), + CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), + CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), + CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), + CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), + CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), +}; + +/* + * init code + */ + +int __init omap2_clk_init(void) +{ + const struct prcm_config *prcm; + struct omap_clk *c; + u32 clkrate; + u16 cpu_clkflg; + + if (cpu_is_omap242x()) { + prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; + cpu_mask = RATE_IN_242X; + cpu_clkflg = CK_242X; + rate_table = omap2420_rate_table; + } else if (cpu_is_omap2430()) { + prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; + cpu_mask = RATE_IN_243X; + cpu_clkflg = CK_243X; + rate_table = omap2430_rate_table; + } + + clk_init(&omap2_clk_functions); + + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_preinit(c->lk.clk); + + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); + propagate_rate(&osc_ck); + sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); + propagate_rate(&sys_ck); + + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); + } + + /* Check the MPU rate set by bootloader */ + clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; + + recalculate_root_clocks(); + + printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); + dclk = clk_get(NULL, "dpll_ck"); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index ecbb5cd8eec8..ded32364f32b 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -30,314 +30,21 @@ #include <plat/cpu.h> #include <plat/clock.h> #include <plat/sram.h> +#include <plat/sdrc.h> #include <asm/div64.h> #include <asm/clkdev.h> #include <plat/sdrc.h> #include "clock.h" +#include "clock34xx.h" +#include "sdrc.h" #include "prm.h" #include "prm-regbits-34xx.h" #include "cm.h" #include "cm-regbits-34xx.h" -static const struct clkops clkops_noncore_dpll_ops; - -static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); -static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); -static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); - -static const struct clkops clkops_omap3430es2_ssi_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap3430es2_clk_ssi_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -static const struct clkops clkops_omap3430es2_hsotgusb_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -static const struct clkops clkops_omap3430es2_dss_usbhost_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -#include "clock34xx.h" - -struct omap_clk { - u32 cpu; - struct clk_lookup lk; -}; - -#define CLK(dev, con, ck, cp) \ - { \ - .cpu = cp, \ - .lk = { \ - .dev_id = dev, \ - .con_id = con, \ - .clk = ck, \ - }, \ - } - -#define CK_343X (1 << 0) -#define CK_3430ES1 (1 << 1) -#define CK_3430ES2 (1 << 2) - -static struct omap_clk omap34xx_clks[] = { - CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X), - CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X), - CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X), - CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2), - CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X), - CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X), - CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X), - CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X), - CLK(NULL, "sys_ck", &sys_ck, CK_343X), - CLK(NULL, "sys_altclk", &sys_altclk, CK_343X), - CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X), - CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X), - CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X), - CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X), - CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X), - CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X), - CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X), - CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X), - CLK(NULL, "core_ck", &core_ck, CK_343X), - CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X), - CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X), - CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), - CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), - CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), - CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), - CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), - CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), - CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), - CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X), - CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X), - CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X), - CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X), - CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X), - CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X), - CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X), - CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X), - CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X), - CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X), - CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X), - CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X), - CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), - CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), - CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), - CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), - CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), - CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), - CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X), - CLK(NULL, "corex2_fck", &corex2_fck, CK_343X), - CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), - CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), - CLK(NULL, "arm_fck", &arm_fck, CK_343X), - CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), - CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), - CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), - CLK(NULL, "l3_ick", &l3_ick, CK_343X), - CLK(NULL, "l4_ick", &l4_ick, CK_343X), - CLK(NULL, "rm_ick", &rm_ick, CK_343X), - CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), - CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), - CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), - CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), - CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), - CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), - CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), - CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), - CLK(NULL, "modem_fck", &modem_fck, CK_343X), - CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), - CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), - CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), - CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2), - CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2), - CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X), - CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2), - CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), - CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X), - CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X), - CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X), - CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X), - CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X), - CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), - CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_343X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), - CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), - CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), - CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), - CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), - CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), - CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), - CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), - CLK(NULL, "pka_ick", &pka_ick, CK_343X), - CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X), - CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2), - CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2), - CLK(NULL, "icr_ick", &icr_ick, CK_343X), - CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), - CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), - CLK(NULL, "des2_ick", &des2_ick, CK_343X), - CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X), - CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X), - CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X), - CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X), - CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X), - CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_343X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X), - CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), - CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), - CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), - CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), - CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), - CLK("omap_rng", "ick", &rng_ick, CK_343X), - CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), - CLK(NULL, "des1_ick", &des1_ick, CK_343X), - CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), - CLK("omapdss", "tv_fck", &dss_tv_fck, CK_343X), - CLK("omapdss", "video_fck", &dss_96m_fck, CK_343X), - CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_343X), - CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), - CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2), - CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), - CLK(NULL, "cam_ick", &cam_ick, CK_343X), - CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), - CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), - CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), - CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), - CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), - CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), - CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X), - CLK("omap_wdt", "fck", &wdt2_fck, CK_343X), - CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X), - CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2), - CLK("omap_wdt", "ick", &wdt2_ick, CK_343X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X), - CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X), - CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X), - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X), - CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X), - CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_343X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X), - CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X), - CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X), - CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X), - CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X), - CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X), - CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X), - CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X), - CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X), - CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X), - CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X), - CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_343X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), - CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X), - CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), - CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), - CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), - CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X), - CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X), - CLK(NULL, "sr1_fck", &sr1_fck, CK_343X), - CLK(NULL, "sr2_fck", &sr2_fck, CK_343X), - CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X), - CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X), - CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X), -}; - -/* CM_AUTOIDLE_PLL*.AUTO_* bit values */ -#define DPLL_AUTOIDLE_DISABLE 0x0 -#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 - -#define MAX_DPLL_WAIT_TRIES 1000000 - -#define MIN_SDRC_DLL_LOCK_FREQ 83000000 - #define CYCLES_PER_MHZ 1000000 -/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */ -#define SDRC_MPURATE_SCALE 8 - -/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */ -#define SDRC_MPURATE_BASE_SHIFT 9 - -/* - * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at - * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize - */ -#define SDRC_MPURATE_LOOPS 96 - /* * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks * that are sourced by DPLL5, and both of these require this clock @@ -345,6 +52,9 @@ static struct omap_clk omap34xx_clks[] = { */ #define DPLL5_FREQ_FOR_USBHOST 120000000 +/* needed by omap3_core_dpll_m2_set_rate() */ +struct clk *sdrc_ick_p, *arm_fck_p; + /** * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI * @clk: struct clk * being enabled @@ -366,6 +76,13 @@ static void omap3430es2_clk_ssi_find_idlest(struct clk *clk, *idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT; } +const struct clkops clkops_omap3430es2_ssi_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_ssi_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + /** * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST * @clk: struct clk * being enabled @@ -391,6 +108,13 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk, *idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT; } +const struct clkops clkops_omap3430es2_dss_usbhost_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_dss_usbhost_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; + /** * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB * @clk: struct clk * being enabled @@ -412,395 +136,19 @@ static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk, *idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT; } -/** - * omap3_dpll_recalc - recalculate DPLL rate - * @clk: DPLL struct clk - * - * Recalculate and propagate the DPLL rate. - */ -static unsigned long omap3_dpll_recalc(struct clk *clk) -{ - return omap2_get_dpll_rate(clk); -} - -/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ -static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits) -{ - const struct dpll_data *dd; - u32 v; - - dd = clk->dpll_data; - - v = __raw_readl(dd->control_reg); - v &= ~dd->enable_mask; - v |= clken_bits << __ffs(dd->enable_mask); - __raw_writel(v, dd->control_reg); -} - -/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ -static int _omap3_wait_dpll_status(struct clk *clk, u8 state) -{ - const struct dpll_data *dd; - int i = 0; - int ret = -EINVAL; - - dd = clk->dpll_data; - - state <<= __ffs(dd->idlest_mask); - - while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) && - i < MAX_DPLL_WAIT_TRIES) { - i++; - udelay(1); - } - - if (i == MAX_DPLL_WAIT_TRIES) { - printk(KERN_ERR "clock: %s failed transition to '%s'\n", - clk->name, (state) ? "locked" : "bypassed"); - } else { - pr_debug("clock: %s transition to '%s' in %d loops\n", - clk->name, (state) ? "locked" : "bypassed", i); - - ret = 0; - } - - return ret; -} - -/* From 3430 TRM ES2 4.7.6.2 */ -static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) -{ - unsigned long fint; - u16 f = 0; - - fint = clk->dpll_data->clk_ref->rate / n; - - pr_debug("clock: fint is %lu\n", fint); - - if (fint >= 750000 && fint <= 1000000) - f = 0x3; - else if (fint > 1000000 && fint <= 1250000) - f = 0x4; - else if (fint > 1250000 && fint <= 1500000) - f = 0x5; - else if (fint > 1500000 && fint <= 1750000) - f = 0x6; - else if (fint > 1750000 && fint <= 2100000) - f = 0x7; - else if (fint > 7500000 && fint <= 10000000) - f = 0xB; - else if (fint > 10000000 && fint <= 12500000) - f = 0xC; - else if (fint > 12500000 && fint <= 15000000) - f = 0xD; - else if (fint > 15000000 && fint <= 17500000) - f = 0xE; - else if (fint > 17500000 && fint <= 21000000) - f = 0xF; - else - pr_debug("clock: unknown freqsel setting for %d\n", n); - - return f; -} - -/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ - -/* - * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report - * readiness before returning. Will save and restore the DPLL's - * autoidle state across the enable, per the CDP code. If the DPLL - * locked successfully, return 0; if the DPLL did not lock in the time - * allotted, or DPLL3 was passed in, return -EINVAL. - */ -static int _omap3_noncore_dpll_lock(struct clk *clk) -{ - u8 ai; - int r; - - if (clk == &dpll3_ck) - return -EINVAL; - - pr_debug("clock: locking DPLL %s\n", clk->name); - - ai = omap3_dpll_autoidle_read(clk); - - omap3_dpll_deny_idle(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOCKED); - - r = _omap3_wait_dpll_status(clk, 1); - - if (ai) - omap3_dpll_allow_idle(clk); - - return r; -} - -/* - * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power bypass mode. In - * bypass mode, the DPLL's rate is set equal to its parent clock's - * rate. Waits for the DPLL to report readiness before returning. - * Will save and restore the DPLL's autoidle state across the enable, - * per the CDP code. If the DPLL entered bypass mode successfully, - * return 0; if the DPLL did not enter bypass in the time allotted, or - * DPLL3 was passed in, or the DPLL does not support low-power bypass, - * return -EINVAL. - */ -static int _omap3_noncore_dpll_bypass(struct clk *clk) -{ - int r; - u8 ai; - - if (clk == &dpll3_ck) - return -EINVAL; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) - return -EINVAL; - - pr_debug("clock: configuring DPLL %s for low-power bypass\n", - clk->name); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS); - - r = _omap3_wait_dpll_status(clk, 0); - - if (ai) - omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); - - return r; -} - -/* - * _omap3_noncore_dpll_stop - instruct a DPLL to stop - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enter low-power stop. Will save and - * restore the DPLL's autoidle state across the stop, per the CDP - * code. If DPLL3 was passed in, or the DPLL does not support - * low-power stop, return -EINVAL; otherwise, return 0. - */ -static int _omap3_noncore_dpll_stop(struct clk *clk) -{ - u8 ai; - - if (clk == &dpll3_ck) - return -EINVAL; - - if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) - return -EINVAL; - - pr_debug("clock: stopping DPLL %s\n", clk->name); - - ai = omap3_dpll_autoidle_read(clk); - - _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP); - - if (ai) - omap3_dpll_allow_idle(clk); - else - omap3_dpll_deny_idle(clk); - - return 0; -} - -/** - * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. - * The choice of modes depends on the DPLL's programmed rate: if it is - * the same as the DPLL's parent clock, it will enter bypass; - * otherwise, it will enter lock. This code will wait for the DPLL to - * indicate readiness before returning, unless the DPLL takes too long - * to enter the target state. Intended to be used as the struct clk's - * enable function. If DPLL3 was passed in, or the DPLL does not - * support low-power stop, or if the DPLL took too long to enter - * bypass or lock, return -EINVAL; otherwise, return 0. - */ -static int omap3_noncore_dpll_enable(struct clk *clk) -{ - int r; - struct dpll_data *dd; - - if (clk == &dpll3_ck) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (clk->rate == dd->clk_bypass->rate) { - WARN_ON(clk->parent != dd->clk_bypass); - r = _omap3_noncore_dpll_bypass(clk); - } else { - WARN_ON(clk->parent != dd->clk_ref); - r = _omap3_noncore_dpll_lock(clk); - } - /* FIXME: this is dubious - if clk->rate has changed, what about propagating? */ - if (!r) - clk->rate = omap2_get_dpll_rate(clk); - - return r; -} - -/** - * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode - * @clk: pointer to a DPLL struct clk - * - * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. - * The choice of modes depends on the DPLL's programmed rate: if it is - * the same as the DPLL's parent clock, it will enter bypass; - * otherwise, it will enter lock. This code will wait for the DPLL to - * indicate readiness before returning, unless the DPLL takes too long - * to enter the target state. Intended to be used as the struct clk's - * enable function. If DPLL3 was passed in, or the DPLL does not - * support low-power stop, or if the DPLL took too long to enter - * bypass or lock, return -EINVAL; otherwise, return 0. - */ -static void omap3_noncore_dpll_disable(struct clk *clk) -{ - if (clk == &dpll3_ck) - return; - - _omap3_noncore_dpll_stop(clk); -} - - -/* Non-CORE DPLL rate set code */ - -/* - * omap3_noncore_dpll_program - set non-core DPLL M,N values directly - * @clk: struct clk * of DPLL to set - * @m: DPLL multiplier to set - * @n: DPLL divider to set - * @freqsel: FREQSEL value to set - * - * Program the DPLL with the supplied M, N values, and wait for the DPLL to - * lock.. Returns -EINVAL upon error, or 0 upon success. - */ -static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) -{ - struct dpll_data *dd = clk->dpll_data; - u32 v; - - /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ - _omap3_noncore_dpll_bypass(clk); - - /* Set jitter correction */ - v = __raw_readl(dd->control_reg); - v &= ~dd->freqsel_mask; - v |= freqsel << __ffs(dd->freqsel_mask); - __raw_writel(v, dd->control_reg); - - /* Set DPLL multiplier, divider */ - v = __raw_readl(dd->mult_div1_reg); - v &= ~(dd->mult_mask | dd->div1_mask); - v |= m << __ffs(dd->mult_mask); - v |= (n - 1) << __ffs(dd->div1_mask); - __raw_writel(v, dd->mult_div1_reg); - - /* We let the clock framework set the other output dividers later */ - - /* REVISIT: Set ramp-up delay? */ - - _omap3_noncore_dpll_lock(clk); - - return 0; -} - -/** - * omap3_noncore_dpll_set_rate - set non-core DPLL rate - * @clk: struct clk * of DPLL to set - * @rate: rounded target rate - * - * Set the DPLL CLKOUT to the target rate. If the DPLL can enter - * low-power bypass, and the target rate is the bypass source clock - * rate, then configure the DPLL for bypass. Otherwise, round the - * target rate if it hasn't been done already, then program and lock - * the DPLL. Returns -EINVAL upon error, or 0 upon success. - */ -static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) -{ - struct clk *new_parent = NULL; - u16 freqsel; - struct dpll_data *dd; - int ret; - - if (!clk || !rate) - return -EINVAL; - - dd = clk->dpll_data; - if (!dd) - return -EINVAL; - - if (rate == omap2_get_dpll_rate(clk)) - return 0; - - /* - * Ensure both the bypass and ref clocks are enabled prior to - * doing anything; we need the bypass clock running to reprogram - * the DPLL. - */ - omap2_clk_enable(dd->clk_bypass); - omap2_clk_enable(dd->clk_ref); - - if (dd->clk_bypass->rate == rate && - (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) { - pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); - - ret = _omap3_noncore_dpll_bypass(clk); - if (!ret) - new_parent = dd->clk_bypass; - } else { - if (dd->last_rounded_rate != rate) - omap2_dpll_round_rate(clk, rate); - - if (dd->last_rounded_rate == 0) - return -EINVAL; - - freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); - if (!freqsel) - WARN_ON(1); - - pr_debug("clock: %s: set rate: locking rate to %lu.\n", - clk->name, rate); - - ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, - dd->last_rounded_n, freqsel); - if (!ret) - new_parent = dd->clk_ref; - } - if (!ret) { - /* - * Switch the parent clock in the heirarchy, and make sure - * that the new parent's usecount is correct. Note: we - * enable the new parent before disabling the old to avoid - * any unnecessary hardware disable->enable transitions. - */ - if (clk->usecount) { - omap2_clk_enable(new_parent); - omap2_clk_disable(clk->parent); - } - clk_reparent(clk, new_parent); - clk->rate = rate; - } - omap2_clk_disable(dd->clk_ref); - omap2_clk_disable(dd->clk_bypass); +const struct clkops clkops_omap3430es2_hsotgusb_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap3430es2_clk_hsotgusb_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; - return 0; -} +const struct clkops clkops_noncore_dpll_ops = { + .enable = omap3_noncore_dpll_enable, + .disable = omap3_noncore_dpll_disable, +}; -static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) +int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) { /* * According to the 12-5 CDP code from TI, "Limitation 2.5" @@ -831,12 +179,12 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate) * Program the DPLL M2 divider with the rounded target rate. Returns * -EINVAL upon error, or 0 upon success. */ -static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) +int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) { u32 new_div = 0; u32 unlock_dll = 0; u32 c; - unsigned long validrate, sdrcrate, mpurate; + unsigned long validrate, sdrcrate, _mpurate; struct omap_sdrc_params *sdrc_cs0; struct omap_sdrc_params *sdrc_cs1; int ret; @@ -844,14 +192,11 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) if (!clk || !rate) return -EINVAL; - if (clk != &dpll3_m2_ck) - return -EINVAL; - validrate = omap2_clksel_round_rate_div(clk, rate, &new_div); if (validrate != rate) return -EINVAL; - sdrcrate = sdrc_ick.rate; + sdrcrate = sdrc_ick_p->rate; if (rate > clk->rate) sdrcrate <<= ((rate / clk->rate) >> 1); else @@ -869,8 +214,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) /* * XXX This only needs to be done when the CPU frequency changes */ - mpurate = arm_fck.rate / CYCLES_PER_MHZ; - c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; + _mpurate = arm_fck_p->rate / CYCLES_PER_MHZ; + c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT; c += 1; /* for safety */ c *= SDRC_MPURATE_LOOPS; c >>= SDRC_MPURATE_SCALE; @@ -906,129 +251,6 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate) return 0; } - -static const struct clkops clkops_noncore_dpll_ops = { - .enable = &omap3_noncore_dpll_enable, - .disable = &omap3_noncore_dpll_disable, -}; - -/* DPLL autoidle read/set code */ - - -/** - * omap3_dpll_autoidle_read - read a DPLL's autoidle bits - * @clk: struct clk * of the DPLL to read - * - * Return the DPLL's autoidle bits, shifted down to bit 0. Returns - * -EINVAL if passed a null pointer or if the struct clk does not - * appear to refer to a DPLL. - */ -static u32 omap3_dpll_autoidle_read(struct clk *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return -EINVAL; - - dd = clk->dpll_data; - - v = __raw_readl(dd->autoidle_reg); - v &= dd->autoidle_mask; - v >>= __ffs(dd->autoidle_mask); - - return v; -} - -/** - * omap3_dpll_allow_idle - enable DPLL autoidle bits - * @clk: struct clk * of the DPLL to operate on - * - * Enable DPLL automatic idle control. This automatic idle mode - * switching takes effect only when the DPLL is locked, at least on - * OMAP3430. The DPLL will enter low-power stop when its downstream - * clocks are gated. No return value. - */ -static void omap3_dpll_allow_idle(struct clk *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - /* - * REVISIT: CORE DPLL can optionally enter low-power bypass - * by writing 0x5 instead of 0x1. Add some mechanism to - * optionally enter this mode. - */ - v = __raw_readl(dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); - __raw_writel(v, dd->autoidle_reg); -} - -/** - * omap3_dpll_deny_idle - prevent DPLL from automatically idling - * @clk: struct clk * of the DPLL to operate on - * - * Disable DPLL automatic idle control. No return value. - */ -static void omap3_dpll_deny_idle(struct clk *clk) -{ - const struct dpll_data *dd; - u32 v; - - if (!clk || !clk->dpll_data) - return; - - dd = clk->dpll_data; - - v = __raw_readl(dd->autoidle_reg); - v &= ~dd->autoidle_mask; - v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); - __raw_writel(v, dd->autoidle_reg); -} - -/* Clock control for DPLL outputs */ - -/** - * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate - * @clk: DPLL output struct clk - * - * Using parent clock DPLL data, look up DPLL state. If locked, set our - * rate to the dpll_clk * 2; otherwise, just use dpll_clk. - */ -static unsigned long omap3_clkoutx2_recalc(struct clk *clk) -{ - const struct dpll_data *dd; - unsigned long rate; - u32 v; - struct clk *pclk; - - /* Walk up the parents of clk, looking for a DPLL */ - pclk = clk->parent; - while (pclk && !pclk->dpll_data) - pclk = pclk->parent; - - /* clk does not have a DPLL as a parent? */ - WARN_ON(!pclk); - - dd = pclk->dpll_data; - - WARN_ON(!dd->enable_mask); - - v = __raw_readl(dd->control_reg) & dd->enable_mask; - v >>= __ffs(dd->enable_mask); - if (v != OMAP3XXX_EN_DPLL_LOCKED) - rate = clk->parent->rate; - else - rate = clk->parent->rate * 2; - return rate; -} - /* Common clock code */ /* @@ -1037,7 +259,7 @@ static unsigned long omap3_clkoutx2_recalc(struct clk *clk) */ #if defined(CONFIG_ARCH_OMAP3) -static struct clk_functions omap2_clk_functions = { +struct clk_functions omap2_clk_functions = { .clk_enable = omap2_clk_enable, .clk_disable = omap2_clk_disable, .clk_round_rate = omap2_clk_round_rate, @@ -1063,7 +285,7 @@ void omap2_clk_prepare_for_reboot(void) #endif } -static void omap3_clk_lock_dpll5(void) +void omap3_clk_lock_dpll5(void) { struct clk *dpll5_clk; struct clk *dpll5_m2_clk; @@ -1093,19 +315,32 @@ static void omap3_clk_lock_dpll5(void) */ static int __init omap2_clk_arch_init(void) { + struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck; + unsigned long osc_sys_rate; + if (!mpurate) return -EINVAL; + /* XXX test these for success */ + dpll1_ck = clk_get(NULL, "dpll1_ck"); + arm_fck = clk_get(NULL, "arm_fck"); + core_ck = clk_get(NULL, "core_ck"); + osc_sys_ck = clk_get(NULL, "osc_sys_ck"); + /* REVISIT: not yet ready for 343x */ - if (clk_set_rate(&dpll1_ck, mpurate)) + if (clk_set_rate(dpll1_ck, mpurate)) printk(KERN_ERR "*** Unable to set MPU rate\n"); recalculate_root_clocks(); - printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10), - (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ; + osc_sys_rate = clk_get_rate(osc_sys_ck); + + pr_info("Switched to new clocking rate (Crystal/Core/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (osc_sys_rate / 1000000), + ((osc_sys_rate / 100000) % 10), + (clk_get_rate(core_ck) / 1000000), + (clk_get_rate(arm_fck) / 1000000)); calibrate_delay(); @@ -1113,83 +348,7 @@ static int __init omap2_clk_arch_init(void) } arch_initcall(omap2_clk_arch_init); -int __init omap2_clk_init(void) -{ - /* struct prcm_config *prcm; */ - struct omap_clk *c; - /* u32 clkrate; */ - u32 cpu_clkflg; - - if (cpu_is_omap34xx()) { - cpu_mask = RATE_IN_343X; - cpu_clkflg = CK_343X; - - /* - * Update this if there are further clock changes between ES2 - * and production parts - */ - if (omap_rev() == OMAP3430_REV_ES1_0) { - /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ - cpu_clkflg |= CK_3430ES1; - } else { - cpu_mask |= RATE_IN_3430ES2; - cpu_clkflg |= CK_3430ES2; - } - } - - clk_init(&omap2_clk_functions); - - for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - clk_preinit(c->lk.clk); - for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - omap2_init_clk_clkdm(c->lk.clk); - } - - /* REVISIT: Not yet ready for OMAP3 */ -#if 0 - /* Check the MPU rate set by bootloader */ - clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; #endif - recalculate_root_clocks(); - - printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, - (core_ck.rate / 1000000), (arm_fck.rate / 1000000)); - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable_init_clocks(); - - /* - * Lock DPLL5 and put it in autoidle. - */ - if (omap_rev() >= OMAP3430_REV_ES2_0) - omap3_clk_lock_dpll5(); - /* Avoid sleeping during omap2_clk_prepare_for_reboot() */ - /* REVISIT: not yet ready for 343x */ -#if 0 - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); -#endif - return 0; -} - -#endif diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 8fe1bcb23dd9..9a2c07eac9ad 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -1,2993 +1,24 @@ /* - * OMAP3 clock framework + * OMAP3 clock function prototypes and macros * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation - * - * Written by Paul Walmsley - * With many device clock fixes by Kevin Hilman and Jouni Högander - * DPLL bypass clock support added by Roman Tereshonkov - * - */ - -/* - * Virtual clocks are introduced as convenient tools. - * They are sources for other clocks and not supposed - * to be requested from drivers directly. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H - -#include <plat/control.h> - -#include "clock.h" -#include "cm.h" -#include "cm-regbits-34xx.h" -#include "prm.h" -#include "prm-regbits-34xx.h" - -#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR - -static unsigned long omap3_dpll_recalc(struct clk *clk); -static unsigned long omap3_clkoutx2_recalc(struct clk *clk); -static void omap3_dpll_allow_idle(struct clk *clk); -static void omap3_dpll_deny_idle(struct clk *clk); -static u32 omap3_dpll_autoidle_read(struct clk *clk); -static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); -static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate); -static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate); - -/* Maximum DPLL multiplier, divider values for OMAP3 */ -#define OMAP3_MAX_DPLL_MULT 2048 -#define OMAP3_MAX_DPLL_DIV 128 - -/* - * DPLL1 supplies clock to the MPU. - * DPLL2 supplies clock to the IVA2. - * DPLL3 supplies CORE domain clocks. - * DPLL4 supplies peripheral clocks. - * DPLL5 supplies other peripheral clocks (USBHOST, USIM). - */ - -/* Forward declarations for DPLL bypass clocks */ -static struct clk dpll1_fck; -static struct clk dpll2_fck; - -/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ -#define DPLL_LOW_POWER_STOP 0x1 -#define DPLL_LOW_POWER_BYPASS 0x5 -#define DPLL_LOCKED 0x7 - -/* PRM CLOCKS */ - -/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */ -static struct clk omap_32k_fck = { - .name = "omap_32k_fck", - .ops = &clkops_null, - .rate = 32768, - .flags = RATE_FIXED, -}; - -static struct clk secure_32k_fck = { - .name = "secure_32k_fck", - .ops = &clkops_null, - .rate = 32768, - .flags = RATE_FIXED, -}; - -/* Virtual source clocks for osc_sys_ck */ -static struct clk virt_12m_ck = { - .name = "virt_12m_ck", - .ops = &clkops_null, - .rate = 12000000, - .flags = RATE_FIXED, -}; - -static struct clk virt_13m_ck = { - .name = "virt_13m_ck", - .ops = &clkops_null, - .rate = 13000000, - .flags = RATE_FIXED, -}; - -static struct clk virt_16_8m_ck = { - .name = "virt_16_8m_ck", - .ops = &clkops_null, - .rate = 16800000, - .flags = RATE_FIXED, -}; - -static struct clk virt_19_2m_ck = { - .name = "virt_19_2m_ck", - .ops = &clkops_null, - .rate = 19200000, - .flags = RATE_FIXED, -}; - -static struct clk virt_26m_ck = { - .name = "virt_26m_ck", - .ops = &clkops_null, - .rate = 26000000, - .flags = RATE_FIXED, -}; - -static struct clk virt_38_4m_ck = { - .name = "virt_38_4m_ck", - .ops = &clkops_null, - .rate = 38400000, - .flags = RATE_FIXED, -}; - -static const struct clksel_rate osc_sys_12m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_13m_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_16_8m_rates[] = { - { .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_19_2m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_26m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate osc_sys_38_4m_rates[] = { - { .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel osc_sys_clksel[] = { - { .parent = &virt_12m_ck, .rates = osc_sys_12m_rates }, - { .parent = &virt_13m_ck, .rates = osc_sys_13m_rates }, - { .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates }, - { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates }, - { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates }, - { .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates }, - { .parent = NULL }, -}; - -/* Oscillator clock */ -/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */ -static struct clk osc_sys_ck = { - .name = "osc_sys_ck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP3430_PRM_CLKSEL, - .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, - .clksel = osc_sys_clksel, - /* REVISIT: deal with autoextclkmode? */ - .flags = RATE_FIXED, - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate div2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -static const struct clksel sys_clksel[] = { - { .parent = &osc_sys_ck, .rates = div2_rates }, - { .parent = NULL } -}; - -/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */ -/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */ -static struct clk sys_ck = { - .name = "sys_ck", - .ops = &clkops_null, - .parent = &osc_sys_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, - .clksel_mask = OMAP_SYSCLKDIV_MASK, - .clksel = sys_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk sys_altclk = { - .name = "sys_altclk", - .ops = &clkops_null, -}; - -/* Optional external clock input for some McBSPs */ -static struct clk mcbsp_clks = { - .name = "mcbsp_clks", - .ops = &clkops_null, -}; - -/* PRM EXTERNAL CLOCK OUTPUT */ - -static struct clk sys_clkout1 = { - .name = "sys_clkout1", - .ops = &clkops_omap2_dflt, - .parent = &osc_sys_ck, - .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, - .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, - .recalc = &followparent_recalc, -}; - -/* DPLLS */ - -/* CM CLOCKS */ - -static const struct clksel_rate div16_dpll_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 5, .val = 5, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 7, .val = 7, .flags = RATE_IN_343X }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 9, .val = 9, .flags = RATE_IN_343X }, - { .div = 10, .val = 10, .flags = RATE_IN_343X }, - { .div = 11, .val = 11, .flags = RATE_IN_343X }, - { .div = 12, .val = 12, .flags = RATE_IN_343X }, - { .div = 13, .val = 13, .flags = RATE_IN_343X }, - { .div = 14, .val = 14, .flags = RATE_IN_343X }, - { .div = 15, .val = 15, .flags = RATE_IN_343X }, - { .div = 16, .val = 16, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -/* DPLL1 */ -/* MPU clock source */ -/* Type: DPLL */ -static struct dpll_data dpll1_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), - .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, - .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, - .clk_bypass = &dpll1_fck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), - .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_MPU_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL), - .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll1_ck = { - .name = "dpll1_ck", - .ops = &clkops_null, - .parent = &sys_ck, - .dpll_data = &dpll1_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, - .clkdm_name = "dpll1_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -/* - * This virtual clock provides the CLKOUTX2 output from the DPLL if the - * DPLL isn't bypassed. - */ -static struct clk dpll1_x2_ck = { - .name = "dpll1_x2_ck", - .ops = &clkops_null, - .parent = &dpll1_ck, - .clkdm_name = "dpll1_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */ -static const struct clksel div16_dpll1_x2m2_clksel[] = { - { .parent = &dpll1_x2_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* - * Does not exist in the TRM - needed to separate the M2 divider from - * bypass selection in mpu_ck - */ -static struct clk dpll1_x2m2_ck = { - .name = "dpll1_x2m2_ck", - .ops = &clkops_null, - .parent = &dpll1_x2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), - .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, - .clksel = div16_dpll1_x2m2_clksel, - .clkdm_name = "dpll1_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* DPLL2 */ -/* IVA2 clock source */ -/* Type: DPLL */ - -static struct dpll_data dpll2_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), - .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, - .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, - .clk_bypass = &dpll2_fck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), - .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | - (1 << DPLL_LOW_POWER_BYPASS), - .auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL), - .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), - .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll2_ck = { - .name = "dpll2_ck", - .ops = &clkops_noncore_dpll_ops, - .parent = &sys_ck, - .dpll_data = &dpll2_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, - .clkdm_name = "dpll2_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -static const struct clksel div16_dpll2_m2x2_clksel[] = { - { .parent = &dpll2_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* - * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT - * or CLKOUTX2. CLKOUT seems most plausible. - */ -static struct clk dpll2_m2_ck = { - .name = "dpll2_m2_ck", - .ops = &clkops_null, - .parent = &dpll2_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, - OMAP3430_CM_CLKSEL2_PLL), - .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, - .clksel = div16_dpll2_m2x2_clksel, - .clkdm_name = "dpll2_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* - * DPLL3 - * Source clock for all interfaces and for some device fclks - * REVISIT: Also supports fast relock bypass - not included below - */ -static struct dpll_data dpll3_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, - .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, - .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), - .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll3_ck = { - .name = "dpll3_ck", - .ops = &clkops_null, - .parent = &sys_ck, - .dpll_data = &dpll3_dd, - .round_rate = &omap2_dpll_round_rate, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -/* - * This virtual clock provides the CLKOUTX2 output from the DPLL if the - * DPLL isn't bypassed - */ -static struct clk dpll3_x2_ck = { - .name = "dpll3_x2_ck", - .ops = &clkops_null, - .parent = &dpll3_ck, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel_rate div31_dpll3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_3430ES2 }, - { .div = 4, .val = 4, .flags = RATE_IN_3430ES2 }, - { .div = 5, .val = 5, .flags = RATE_IN_3430ES2 }, - { .div = 6, .val = 6, .flags = RATE_IN_3430ES2 }, - { .div = 7, .val = 7, .flags = RATE_IN_3430ES2 }, - { .div = 8, .val = 8, .flags = RATE_IN_3430ES2 }, - { .div = 9, .val = 9, .flags = RATE_IN_3430ES2 }, - { .div = 10, .val = 10, .flags = RATE_IN_3430ES2 }, - { .div = 11, .val = 11, .flags = RATE_IN_3430ES2 }, - { .div = 12, .val = 12, .flags = RATE_IN_3430ES2 }, - { .div = 13, .val = 13, .flags = RATE_IN_3430ES2 }, - { .div = 14, .val = 14, .flags = RATE_IN_3430ES2 }, - { .div = 15, .val = 15, .flags = RATE_IN_3430ES2 }, - { .div = 16, .val = 16, .flags = RATE_IN_3430ES2 }, - { .div = 17, .val = 17, .flags = RATE_IN_3430ES2 }, - { .div = 18, .val = 18, .flags = RATE_IN_3430ES2 }, - { .div = 19, .val = 19, .flags = RATE_IN_3430ES2 }, - { .div = 20, .val = 20, .flags = RATE_IN_3430ES2 }, - { .div = 21, .val = 21, .flags = RATE_IN_3430ES2 }, - { .div = 22, .val = 22, .flags = RATE_IN_3430ES2 }, - { .div = 23, .val = 23, .flags = RATE_IN_3430ES2 }, - { .div = 24, .val = 24, .flags = RATE_IN_3430ES2 }, - { .div = 25, .val = 25, .flags = RATE_IN_3430ES2 }, - { .div = 26, .val = 26, .flags = RATE_IN_3430ES2 }, - { .div = 27, .val = 27, .flags = RATE_IN_3430ES2 }, - { .div = 28, .val = 28, .flags = RATE_IN_3430ES2 }, - { .div = 29, .val = 29, .flags = RATE_IN_3430ES2 }, - { .div = 30, .val = 30, .flags = RATE_IN_3430ES2 }, - { .div = 31, .val = 31, .flags = RATE_IN_3430ES2 }, - { .div = 0 }, -}; - -static const struct clksel div31_dpll3m2_clksel[] = { - { .parent = &dpll3_ck, .rates = div31_dpll3_rates }, - { .parent = NULL } -}; - -/* DPLL3 output M2 - primary control point for CORE speed */ -static struct clk dpll3_m2_ck = { - .name = "dpll3_m2_ck", - .ops = &clkops_null, - .parent = &dpll3_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, - .clksel = div31_dpll3m2_clksel, - .clkdm_name = "dpll3_clkdm", - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap3_core_dpll_m2_set_rate, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk core_ck = { - .name = "core_ck", - .ops = &clkops_null, - .parent = &dpll3_m2_ck, - .recalc = &followparent_recalc, -}; - -static struct clk dpll3_m2x2_ck = { - .name = "dpll3_m2x2_ck", - .ops = &clkops_null, - .parent = &dpll3_m2_ck, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static const struct clksel div16_dpll3_clksel[] = { - { .parent = &dpll3_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* This virtual clock is the source for dpll3_m3x2_ck */ -static struct clk dpll3_m3_ck = { - .name = "dpll3_m3_ck", - .ops = &clkops_null, - .parent = &dpll3_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL3_MASK, - .clksel = div16_dpll3_clksel, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll3_m3x2_ck = { - .name = "dpll3_m3x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll3_m3_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll3_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static struct clk emu_core_alwon_ck = { - .name = "emu_core_alwon_ck", - .ops = &clkops_null, - .parent = &dpll3_m3x2_ck, - .clkdm_name = "dpll3_clkdm", - .recalc = &followparent_recalc, -}; - -/* DPLL4 */ -/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */ -/* Type: DPLL */ -static struct dpll_data dpll4_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), - .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, - .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), - .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), - .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll4_ck = { - .name = "dpll4_ck", - .ops = &clkops_noncore_dpll_ops, - .parent = &sys_ck, - .dpll_data = &dpll4_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_dpll4_set_rate, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -/* - * This virtual clock provides the CLKOUTX2 output from the DPLL if the - * DPLL isn't bypassed -- - * XXX does this serve any downstream clocks? - */ -static struct clk dpll4_x2_ck = { - .name = "dpll4_x2_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel div16_dpll4_clksel[] = { - { .parent = &dpll4_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -/* This virtual clock is the source for dpll4_m2x2_ck */ -static struct clk dpll4_m2_ck = { - .name = "dpll4_m2_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), - .clksel_mask = OMAP3430_DIV_96M_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m2x2_ck = { - .name = "dpll4_m2x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m2_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_96M_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* - * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as - * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM: - * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and - * CM_96K_(F)CLK. - */ -static struct clk omap_96m_alwon_fck = { - .name = "omap_96m_alwon_fck", - .ops = &clkops_null, - .parent = &dpll4_m2x2_ck, - .recalc = &followparent_recalc, -}; - -static struct clk cm_96m_fck = { - .name = "cm_96m_fck", - .ops = &clkops_null, - .parent = &omap_96m_alwon_fck, - .recalc = &followparent_recalc, -}; - -static const struct clksel_rate omap_96m_dpll_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate omap_96m_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel omap_96m_fck_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates }, - { .parent = &sys_ck, .rates = omap_96m_sys_rates }, - { .parent = NULL } -}; - -static struct clk omap_96m_fck = { - .name = "omap_96m_fck", - .ops = &clkops_null, - .parent = &sys_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_96M_MASK, - .clksel = omap_96m_fck_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* This virtual clock is the source for dpll4_m3x2_ck */ -static struct clk dpll4_m3_ck = { - .name = "dpll4_m3_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_TV_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m3x2_ck = { - .name = "dpll4_m3x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m3_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_TV_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel_rate omap_54m_d4m3x2_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate omap_54m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel omap_54m_clksel[] = { - { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates }, - { .parent = &sys_altclk, .rates = omap_54m_alt_rates }, - { .parent = NULL } -}; - -static struct clk omap_54m_fck = { - .name = "omap_54m_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_54M_MASK, - .clksel = omap_54m_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate omap_48m_cm96m_rates[] = { - { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate omap_48m_alt_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel omap_48m_clksel[] = { - { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, - { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, - { .parent = NULL } -}; - -static struct clk omap_48m_fck = { - .name = "omap_48m_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_SOURCE_48M_MASK, - .clksel = omap_48m_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk omap_12m_fck = { - .name = "omap_12m_fck", - .ops = &clkops_null, - .parent = &omap_48m_fck, - .fixed_div = 4, - .recalc = &omap2_fixed_divisor_recalc, -}; - -/* This virstual clock is the source for dpll4_m4x2_ck */ -static struct clk dpll4_m4_ck = { - .name = "dpll4_m4_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, - .set_rate = &omap2_clksel_set_rate, - .round_rate = &omap2_clksel_round_rate, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m4x2_ck = { - .name = "dpll4_m4x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m4_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* This virtual clock is the source for dpll4_m5x2_ck */ -static struct clk dpll4_m5_ck = { - .name = "dpll4_m5_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m5x2_ck = { - .name = "dpll4_m5x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m5_ck, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -/* This virtual clock is the source for dpll4_m6x2_ck */ -static struct clk dpll4_m6_ck = { - .name = "dpll4_m6_ck", - .ops = &clkops_null, - .parent = &dpll4_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_DIV_DPLL4_MASK, - .clksel = div16_dpll4_clksel, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* The PWRDN bit is apparently only available on 3430ES2 and above */ -static struct clk dpll4_m6x2_ck = { - .name = "dpll4_m6x2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll4_m6_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), - .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, - .flags = INVERT_ENABLE, - .clkdm_name = "dpll4_clkdm", - .recalc = &omap3_clkoutx2_recalc, -}; - -static struct clk emu_per_alwon_ck = { - .name = "emu_per_alwon_ck", - .ops = &clkops_null, - .parent = &dpll4_m6x2_ck, - .clkdm_name = "dpll4_clkdm", - .recalc = &followparent_recalc, -}; - -/* DPLL5 */ -/* Supplies 120MHz clock, USIM source clock */ -/* Type: DPLL */ -/* 3430ES2 only */ -static struct dpll_data dpll5_dd = { - .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), - .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, - .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, - .clk_bypass = &sys_ck, - .clk_ref = &sys_ck, - .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, - .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), - .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, - .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), - .auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT, - .recal_en_bit = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT, - .recal_st_bit = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT, - .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL), - .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK, - .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), - .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, - .max_multiplier = OMAP3_MAX_DPLL_MULT, - .min_divider = 1, - .max_divider = OMAP3_MAX_DPLL_DIV, - .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE -}; - -static struct clk dpll5_ck = { - .name = "dpll5_ck", - .ops = &clkops_noncore_dpll_ops, - .parent = &sys_ck, - .dpll_data = &dpll5_dd, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, - .clkdm_name = "dpll5_clkdm", - .recalc = &omap3_dpll_recalc, -}; - -static const struct clksel div16_dpll5_clksel[] = { - { .parent = &dpll5_ck, .rates = div16_dpll_rates }, - { .parent = NULL } -}; - -static struct clk dpll5_m2_ck = { - .name = "dpll5_m2_ck", - .ops = &clkops_null, - .parent = &dpll5_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), - .clksel_mask = OMAP3430ES2_DIV_120M_MASK, - .clksel = div16_dpll5_clksel, - .clkdm_name = "dpll5_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* CM EXTERNAL CLOCK OUTPUTS */ - -static const struct clksel_rate clkout2_src_core_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_96m_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate clkout2_src_54m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel clkout2_src_clksel[] = { - { .parent = &core_ck, .rates = clkout2_src_core_rates }, - { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, - { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, - { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, - { .parent = NULL } -}; - -static struct clk clkout2_src_ck = { - .name = "clkout2_src_ck", - .ops = &clkops_omap2_dflt, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP3430_CM_CLKOUT_CTRL, - .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, - .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, - .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, - .clksel = clkout2_src_clksel, - .clkdm_name = "core_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate sys_clkout2_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 1, .flags = RATE_IN_343X }, - { .div = 4, .val = 2, .flags = RATE_IN_343X }, - { .div = 8, .val = 3, .flags = RATE_IN_343X }, - { .div = 16, .val = 4, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel sys_clkout2_clksel[] = { - { .parent = &clkout2_src_ck, .rates = sys_clkout2_rates }, - { .parent = NULL }, -}; - -static struct clk sys_clkout2 = { - .name = "sys_clkout2", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, - .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, - .clksel = sys_clkout2_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* CM OUTPUT CLOCKS */ - -static struct clk corex2_fck = { - .name = "corex2_fck", - .ops = &clkops_null, - .parent = &dpll3_m2x2_ck, - .recalc = &followparent_recalc, -}; - -/* DPLL power domain clock controls */ - -static const struct clksel_rate div4_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -static const struct clksel div4_core_clksel[] = { - { .parent = &core_ck, .rates = div4_rates }, - { .parent = NULL } -}; - -/* - * REVISIT: Are these in DPLL power domain or CM power domain? docs - * may be inconsistent here? - */ -static struct clk dpll1_fck = { - .name = "dpll1_fck", - .ops = &clkops_null, - .parent = &core_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), - .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, - .clksel = div4_core_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mpu_ck = { - .name = "mpu_ck", - .ops = &clkops_null, - .parent = &dpll1_x2m2_ck, - .clkdm_name = "mpu_clkdm", - .recalc = &followparent_recalc, -}; - -/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */ -static const struct clksel_rate arm_fck_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 1, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel arm_fck_clksel[] = { - { .parent = &mpu_ck, .rates = arm_fck_rates }, - { .parent = NULL } -}; - -static struct clk arm_fck = { - .name = "arm_fck", - .ops = &clkops_null, - .parent = &mpu_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), - .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, - .clksel = arm_fck_clksel, - .clkdm_name = "mpu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* XXX What about neon_clkdm ? */ - -/* - * REVISIT: This clock is never specifically defined in the 3430 TRM, - * although it is referenced - so this is a guess - */ -static struct clk emu_mpu_alwon_ck = { - .name = "emu_mpu_alwon_ck", - .ops = &clkops_null, - .parent = &mpu_ck, - .recalc = &followparent_recalc, -}; - -static struct clk dpll2_fck = { - .name = "dpll2_fck", - .ops = &clkops_null, - .parent = &core_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), - .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, - .clksel = div4_core_clksel, - .recalc = &omap2_clksel_recalc, -}; - -static struct clk iva2_ck = { - .name = "iva2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &dpll2_m2_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, - .clkdm_name = "iva2_clkdm", - .recalc = &followparent_recalc, -}; - -/* Common interface clocks */ - -static const struct clksel div2_core_clksel[] = { - { .parent = &core_ck, .rates = div2_rates }, - { .parent = NULL } -}; - -static struct clk l3_ick = { - .name = "l3_ick", - .ops = &clkops_null, - .parent = &core_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_L3_MASK, - .clksel = div2_core_clksel, - .clkdm_name = "core_l3_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel div2_l3_clksel[] = { - { .parent = &l3_ick, .rates = div2_rates }, - { .parent = NULL } -}; - -static struct clk l4_ick = { - .name = "l4_ick", - .ops = &clkops_null, - .parent = &l3_ick, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_L4_MASK, - .clksel = div2_l3_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, - -}; - -static const struct clksel div2_l4_clksel[] = { - { .parent = &l4_ick, .rates = div2_rates }, - { .parent = NULL } -}; - -static struct clk rm_ick = { - .name = "rm_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_RM_MASK, - .clksel = div2_l4_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* GFX power domain */ - -/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */ - -static const struct clksel gfx_l3_clksel[] = { - { .parent = &l3_ick, .rates = gfx_l3_rates }, - { .parent = NULL } -}; - -/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ -static struct clk gfx_l3_ck = { - .name = "gfx_l3_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), - .enable_bit = OMAP_EN_GFX_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk gfx_l3_fck = { - .name = "gfx_l3_fck", - .ops = &clkops_null, - .parent = &gfx_l3_ck, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), - .clksel_mask = OMAP_CLKSEL_GFX_MASK, - .clksel = gfx_l3_clksel, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gfx_l3_ick = { - .name = "gfx_l3_ick", - .ops = &clkops_null, - .parent = &gfx_l3_ck, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gfx_cg1_ck = { - .name = "gfx_cg1_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &gfx_l3_fck, /* REVISIT: correct? */ - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES1_EN_2D_SHIFT, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gfx_cg2_ck = { - .name = "gfx_cg2_ck", - .ops = &clkops_omap2_dflt_wait, - .parent = &gfx_l3_fck, /* REVISIT: correct? */ - .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES1_EN_3D_SHIFT, - .clkdm_name = "gfx_3430es1_clkdm", - .recalc = &followparent_recalc, -}; - -/* SGX power domain - 3430ES2 only */ - -static const struct clksel_rate sgx_core_rates[] = { - { .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 4, .val = 1, .flags = RATE_IN_343X }, - { .div = 6, .val = 2, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel_rate sgx_96m_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel sgx_clksel[] = { - { .parent = &core_ck, .rates = sgx_core_rates }, - { .parent = &cm_96m_fck, .rates = sgx_96m_rates }, - { .parent = NULL }, -}; - -static struct clk sgx_fck = { - .name = "sgx_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, - .clksel = sgx_clksel, - .clkdm_name = "sgx_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk sgx_ick = { - .name = "sgx_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT, - .clkdm_name = "sgx_clkdm", - .recalc = &followparent_recalc, -}; - -/* CORE power domain */ - -static struct clk d2d_26m_fck = { - .name = "d2d_26m_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk modem_fck = { - .name = "modem_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MODEM_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk sad2d_ick = { - .name = "sad2d_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SAD2D_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mad2d_ick = { - .name = "mad2d_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), - .enable_bit = OMAP3430_EN_MAD2D_SHIFT, - .clkdm_name = "d2d_clkdm", - .recalc = &followparent_recalc, -}; - -static const struct clksel omap343x_gpt_clksel[] = { - { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, - { .parent = &sys_ck, .rates = gpt_sys_rates }, - { .parent = NULL} -}; - -static struct clk gpt10_fck = { - .name = "gpt10_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_GPT10_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt11_fck = { - .name = "gpt11_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_GPT11_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk cpefuse_fck = { - .name = "cpefuse_fck", - .ops = &clkops_omap2_dflt, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk ts_fck = { - .name = "ts_fck", - .ops = &clkops_omap2_dflt, - .parent = &omap_32k_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_TS_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk usbtll_fck = { - .name = "usbtll_fck", - .ops = &clkops_omap2_dflt, - .parent = &dpll5_m2_ck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), - .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .recalc = &followparent_recalc, -}; - -/* CORE 96M FCLK-derived clocks */ - -static struct clk core_96m_fck = { - .name = "core_96m_fck", - .ops = &clkops_null, - .parent = &omap_96m_fck, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs3_fck = { - .name = "mmchs_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs2_fck = { - .name = "mmchs_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mspro_fck = { - .name = "mspro_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs1_fck = { - .name = "mmchs_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c3_fck = { - .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c2_fck = { - .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c1_fck = { - .name = "i2c_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -/* - * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck; - * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck. - */ -static const struct clksel_rate common_mcbsp_96m_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel mcbsp_15_clksel[] = { - { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, - { .parent = NULL } -}; - -static struct clk mcbsp5_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 5, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, - .clksel = mcbsp_15_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mcbsp1_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), - .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, - .clksel = mcbsp_15_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* CORE_48M_FCK-derived clocks */ - -static struct clk core_48m_fck = { - .name = "core_48m_fck", - .ops = &clkops_null, - .parent = &omap_48m_fck, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi4_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk mcspi3_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk mcspi2_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk mcspi1_fck = { - .name = "mcspi_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk uart2_fck = { - .name = "uart2_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART2_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk uart1_fck = { - .name = "uart1_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_UART1_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk fshostusb_fck = { - .name = "fshostusb_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_48m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - .recalc = &followparent_recalc, -}; - -/* CORE_12M_FCK based clocks */ - -static struct clk core_12m_fck = { - .name = "core_12m_fck", - .ops = &clkops_null, - .parent = &omap_12m_fck, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hdq_fck = { - .name = "hdq_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_12m_fck, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .recalc = &followparent_recalc, -}; - -/* DPLL3-derived clock */ - -static const struct clksel_rate ssi_ssr_corex2_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 0 } -}; - -static const struct clksel ssi_ssr_clksel[] = { - { .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates }, - { .parent = NULL } -}; - -static struct clk ssi_ssr_fck_3430es1 = { - .name = "ssi_ssr_fck", - .ops = &clkops_omap2_dflt, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, - .clksel = ssi_ssr_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk ssi_ssr_fck_3430es2 = { - .name = "ssi_ssr_fck", - .ops = &clkops_omap3430es2_ssi_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, - .clksel = ssi_ssr_clksel, - .clkdm_name = "core_l4_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk ssi_sst_fck_3430es1 = { - .name = "ssi_sst_fck", - .ops = &clkops_null, - .parent = &ssi_ssr_fck_3430es1, - .fixed_div = 2, - .recalc = &omap2_fixed_divisor_recalc, -}; - -static struct clk ssi_sst_fck_3430es2 = { - .name = "ssi_sst_fck", - .ops = &clkops_null, - .parent = &ssi_ssr_fck_3430es2, - .fixed_div = 2, - .recalc = &omap2_fixed_divisor_recalc, -}; - - - -/* CORE_L3_ICK based clocks */ - -/* - * XXX must add clk_enable/clk_disable for these if standard code won't - * handle it - */ -static struct clk core_l3_ick = { - .name = "core_l3_ick", - .ops = &clkops_null, - .parent = &l3_ick, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hsotgusb_ick_3430es1 = { - .name = "hsotgusb_ick", - .ops = &clkops_omap2_dflt, - .parent = &core_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hsotgusb_ick_3430es2 = { - .name = "hsotgusb_ick", - .ops = &clkops_omap3430es2_hsotgusb_wait, - .parent = &core_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk sdrc_ick = { - .name = "sdrc_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SDRC_SHIFT, - .flags = ENABLE_ON_INIT, - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpmc_fck = { - .name = "gpmc_fck", - .ops = &clkops_null, - .parent = &core_l3_ick, - .flags = ENABLE_ON_INIT, /* huh? */ - .clkdm_name = "core_l3_clkdm", - .recalc = &followparent_recalc, -}; - -/* SECURITY_L3_ICK based clocks */ - -static struct clk security_l3_ick = { - .name = "security_l3_ick", - .ops = &clkops_null, - .parent = &l3_ick, - .recalc = &followparent_recalc, -}; - -static struct clk pka_ick = { - .name = "pka_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l3_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_PKA_SHIFT, - .recalc = &followparent_recalc, -}; - -/* CORE_L4_ICK based clocks */ - -static struct clk core_l4_ick = { - .name = "core_l4_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbtll_ick = { - .name = "usbtll_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), - .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs3_ick = { - .name = "mmchs_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -/* Intersystem Communication Registers - chassis mode only */ -static struct clk icr_ick = { - .name = "icr_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_ICR_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk aes2_ick = { - .name = "aes2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_AES2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk sha12_ick = { - .name = "sha12_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SHA12_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk des2_ick = { - .name = "des2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_DES2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs2_ick = { - .name = "mmchs_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MMC2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mmchs1_ick = { - .name = "mmchs_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MMC1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mspro_ick = { - .name = "mspro_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MSPRO_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk hdq_ick = { - .name = "hdq_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_HDQ_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi4_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi3_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi2_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcspi1_ick = { - .name = "mcspi_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c3_ick = { - .name = "i2c_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C3_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c2_ick = { - .name = "i2c_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk i2c1_ick = { - .name = "i2c_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_I2C1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart2_ick = { - .name = "uart2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_UART2_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart1_ick = { - .name = "uart1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_UART1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt11_ick = { - .name = "gpt11_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_GPT11_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt10_ick = { - .name = "gpt10_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_GPT10_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp5_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 5, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp1_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 1, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk fac_ick = { - .name = "fac_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mailboxes_ick = { - .name = "mailboxes_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk omapctrl_ick = { - .name = "omapctrl_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &core_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, - .flags = ENABLE_ON_INIT, - .recalc = &followparent_recalc, -}; - -/* SSI_L4_ICK based clocks */ - -static struct clk ssi_l4_ick = { - .name = "ssi_l4_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk ssi_ick_3430es1 = { - .name = "ssi_ick", - .ops = &clkops_omap2_dflt, - .parent = &ssi_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk ssi_ick_3430es2 = { - .name = "ssi_ick", - .ops = &clkops_omap3430es2_ssi_wait, - .parent = &ssi_l4_ick, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430_EN_SSI_SHIFT, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; - -/* REVISIT: Technically the TRM claims that this is CORE_CLK based, - * but l4_ick makes more sense to me */ - -static const struct clksel usb_l4_clksel[] = { - { .parent = &l4_ick, .rates = div2_rates }, - { .parent = NULL }, -}; - -static struct clk usb_l4_ick = { - .name = "usb_l4_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &l4_ick, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), - .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, - .clksel = usb_l4_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* SECURITY_L4_ICK2 based clocks */ - -static struct clk security_l4_ick2 = { - .name = "security_l4_ick2", - .ops = &clkops_null, - .parent = &l4_ick, - .recalc = &followparent_recalc, -}; - -static struct clk aes1_ick = { - .name = "aes1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_AES1_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk rng_ick = { - .name = "rng_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_RNG_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk sha11_ick = { - .name = "sha11_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_SHA11_SHIFT, - .recalc = &followparent_recalc, -}; - -static struct clk des1_ick = { - .name = "des1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &security_l4_ick2, - .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), - .enable_bit = OMAP3430_EN_DES1_SHIFT, - .recalc = &followparent_recalc, -}; - -/* DSS */ -static struct clk dss1_alwon_fck_3430es1 = { - .name = "dss1_alwon_fck", - .ops = &clkops_omap2_dflt, - .parent = &dpll4_m4x2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS1_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss1_alwon_fck_3430es2 = { - .name = "dss1_alwon_fck", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &dpll4_m4x2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS1_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_tv_fck = { - .name = "dss_tv_fck", - .ops = &clkops_omap2_dflt, - .parent = &omap_54m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_TV_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_96m_fck = { - .name = "dss_96m_fck", - .ops = &clkops_omap2_dflt, - .parent = &omap_96m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_TV_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss2_alwon_fck = { - .name = "dss2_alwon_fck", - .ops = &clkops_omap2_dflt, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_DSS2_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_ick_3430es1 = { - /* Handles both L3 and L4 clocks */ - .name = "dss_ick", - .ops = &clkops_omap2_dflt, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk dss_ick_3430es2 = { - /* Handles both L3 and L4 clocks */ - .name = "dss_ick", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, - .clkdm_name = "dss_clkdm", - .recalc = &followparent_recalc, -}; - -/* CAM */ - -static struct clk cam_mclk = { - .name = "cam_mclk", - .ops = &clkops_omap2_dflt, - .parent = &dpll4_m5x2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk cam_ick = { - /* Handles both L3 and L4 clocks */ - .name = "cam_ick", - .ops = &clkops_omap2_dflt, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_CAM_SHIFT, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk csi2_96m_fck = { - .name = "csi2_96m_fck", - .ops = &clkops_omap2_dflt, - .parent = &core_96m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_CSI2_SHIFT, - .clkdm_name = "cam_clkdm", - .recalc = &followparent_recalc, -}; - -/* USBHOST - 3430ES2 only */ - -static struct clk usbhost_120m_fck = { - .name = "usbhost_120m_fck", - .ops = &clkops_omap2_dflt, - .parent = &dpll5_m2_ck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbhost_48m_fck = { - .name = "usbhost_48m_fck", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &omap_48m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk usbhost_ick = { - /* Handles both L3 and L4 clocks */ - .name = "usbhost_ick", - .ops = &clkops_omap3430es2_dss_usbhost_wait, - .parent = &l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, - .clkdm_name = "usbhost_clkdm", - .recalc = &followparent_recalc, -}; - -/* WKUP */ - -static const struct clksel_rate usim_96m_rates[] = { - { .div = 2, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 8, .val = 5, .flags = RATE_IN_343X }, - { .div = 10, .val = 6, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel_rate usim_120m_rates[] = { - { .div = 4, .val = 7, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 8, .val = 8, .flags = RATE_IN_343X }, - { .div = 16, .val = 9, .flags = RATE_IN_343X }, - { .div = 20, .val = 10, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel usim_clksel[] = { - { .parent = &omap_96m_fck, .rates = usim_96m_rates }, - { .parent = &dpll5_m2_ck, .rates = usim_120m_rates }, - { .parent = &sys_ck, .rates = div2_rates }, - { .parent = NULL }, -}; - -/* 3430ES2 only */ -static struct clk usim_fck = { - .name = "usim_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK, - .clksel = usim_clksel, - .recalc = &omap2_clksel_recalc, -}; - -/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ -static struct clk gpt1_fck = { - .name = "gpt1_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT1_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "wkup_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk wkup_32k_fck = { - .name = "wkup_32k_fck", - .ops = &clkops_null, - .parent = &omap_32k_fck, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio1_dbck = { - .name = "gpio1_dbck", - .ops = &clkops_omap2_dflt, - .parent = &wkup_32k_fck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt2_fck = { - .name = "wdt2_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_32k_fck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wkup_l4_ick = { - .name = "wkup_l4_ick", - .ops = &clkops_null, - .parent = &sys_ck, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -/* 3430ES2 only */ -/* Never specifically named in the TRM, so we have to infer a likely name */ -static struct clk usim_ick = { - .name = "usim_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt2_ick = { - .name = "wdt2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT2_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt1_ick = { - .name = "wdt1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio1_ick = { - .name = "gpio1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk omap_32ksync_ick = { - .name = "omap_32ksync_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -/* XXX This clock no longer exists in 3430 TRM rev F */ -static struct clk gpt12_ick = { - .name = "gpt12_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT12_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt1_ick = { - .name = "gpt1_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &wkup_l4_ick, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT1_SHIFT, - .clkdm_name = "wkup_clkdm", - .recalc = &followparent_recalc, -}; - - - -/* PER clock domain */ - -static struct clk per_96m_fck = { - .name = "per_96m_fck", - .ops = &clkops_null, - .parent = &omap_96m_alwon_fck, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk per_48m_fck = { - .name = "per_48m_fck", - .ops = &clkops_null, - .parent = &omap_48m_fck, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart3_fck = { - .name = "uart3_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_48m_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_UART3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt2_fck = { - .name = "gpt2_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT2_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt3_fck = { - .name = "gpt3_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT3_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt4_fck = { - .name = "gpt4_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT4_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt5_fck = { - .name = "gpt5_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT5_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt6_fck = { - .name = "gpt6_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT6_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt7_fck = { - .name = "gpt7_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT7_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt8_fck = { - .name = "gpt8_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT8_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk gpt9_fck = { - .name = "gpt9_fck", - .ops = &clkops_omap2_dflt_wait, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPT9_SHIFT, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), - .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, - .clksel = omap343x_gpt_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk per_32k_alwon_fck = { - .name = "per_32k_alwon_fck", - .ops = &clkops_null, - .parent = &omap_32k_fck, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio6_dbck = { - .name = "gpio6_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio5_dbck = { - .name = "gpio5_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio4_dbck = { - .name = "gpio4_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio3_dbck = { - .name = "gpio3_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio2_dbck = { - .name = "gpio2_dbck", - .ops = &clkops_omap2_dflt, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt3_fck = { - .name = "wdt3_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_32k_alwon_fck, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk per_l4_ick = { - .name = "per_l4_ick", - .ops = &clkops_null, - .parent = &l4_ick, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio6_ick = { - .name = "gpio6_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO6_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio5_ick = { - .name = "gpio5_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO5_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio4_ick = { - .name = "gpio4_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio3_ick = { - .name = "gpio3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpio2_ick = { - .name = "gpio2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPIO2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk wdt3_ick = { - .name = "wdt3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_WDT3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk uart3_ick = { - .name = "uart3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_UART3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt9_ick = { - .name = "gpt9_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT9_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt8_ick = { - .name = "gpt8_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT8_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt7_ick = { - .name = "gpt7_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT7_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt6_ick = { - .name = "gpt6_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT6_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt5_ick = { - .name = "gpt5_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT5_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt4_ick = { - .name = "gpt4_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt3_ick = { - .name = "gpt3_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk gpt2_ick = { - .name = "gpt2_ick", - .ops = &clkops_omap2_dflt_wait, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_GPT2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp2_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp3_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static struct clk mcbsp4_ick = { - .name = "mcbsp_ick", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .parent = &per_l4_ick, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), - .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, - .clkdm_name = "per_clkdm", - .recalc = &followparent_recalc, -}; - -static const struct clksel mcbsp_234_clksel[] = { - { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, - { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, - { .parent = NULL } -}; - -static struct clk mcbsp2_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 2, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), - .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, - .clksel = mcbsp_234_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mcbsp3_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 3, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, - .clksel = mcbsp_234_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk mcbsp4_fck = { - .name = "mcbsp_fck", - .ops = &clkops_omap2_dflt_wait, - .id = 4, - .init = &omap2_init_clksel_parent, - .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, - .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), - .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, - .clksel = mcbsp_234_clksel, - .clkdm_name = "per_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* EMU clocks */ - -/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */ - -static const struct clksel_rate emu_src_sys_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_core_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_per_rates[] = { - { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel_rate emu_src_mpu_rates[] = { - { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 }, -}; - -static const struct clksel emu_src_clksel[] = { - { .parent = &sys_ck, .rates = emu_src_sys_rates }, - { .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates }, - { .parent = &emu_per_alwon_ck, .rates = emu_src_per_rates }, - { .parent = &emu_mpu_alwon_ck, .rates = emu_src_mpu_rates }, - { .parent = NULL }, -}; - -/* - * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only - * to switch the source of some of the EMU clocks. - * XXX Are there CLKEN bits for these EMU clks? + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation */ -static struct clk emu_src_ck = { - .name = "emu_src_ck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_MUX_CTRL_MASK, - .clksel = emu_src_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate pclk_emu_rates[] = { - { .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 6, .val = 6, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel pclk_emu_clksel[] = { - { .parent = &emu_src_ck, .rates = pclk_emu_rates }, - { .parent = NULL }, -}; - -static struct clk pclk_fck = { - .name = "pclk_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, - .clksel = pclk_emu_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate pclkx2_emu_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 3, .val = 3, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel pclkx2_emu_clksel[] = { - { .parent = &emu_src_ck, .rates = pclkx2_emu_rates }, - { .parent = NULL }, -}; - -static struct clk pclkx2_fck = { - .name = "pclkx2_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, - .clksel = pclkx2_emu_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel atclk_emu_clksel[] = { - { .parent = &emu_src_ck, .rates = div2_rates }, - { .parent = NULL }, -}; - -static struct clk atclk_fck = { - .name = "atclk_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, - .clksel = atclk_emu_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static struct clk traceclk_src_fck = { - .name = "traceclk_src_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, - .clksel = emu_src_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -static const struct clksel_rate traceclk_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, - { .div = 2, .val = 2, .flags = RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_343X }, - { .div = 0 }, -}; - -static const struct clksel traceclk_clksel[] = { - { .parent = &traceclk_src_fck, .rates = traceclk_rates }, - { .parent = NULL }, -}; - -static struct clk traceclk_fck = { - .name = "traceclk_fck", - .ops = &clkops_null, - .init = &omap2_init_clksel_parent, - .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), - .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, - .clksel = traceclk_clksel, - .clkdm_name = "emu_clkdm", - .recalc = &omap2_clksel_recalc, -}; - -/* SR clocks */ - -/* SmartReflex fclk (VDD1) */ -static struct clk sr1_fck = { - .name = "sr1_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_SR1_SHIFT, - .recalc = &followparent_recalc, -}; - -/* SmartReflex fclk (VDD2) */ -static struct clk sr2_fck = { - .name = "sr2_fck", - .ops = &clkops_omap2_dflt_wait, - .parent = &sys_ck, - .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), - .enable_bit = OMAP3430_EN_SR2_SHIFT, - .recalc = &followparent_recalc, -}; -static struct clk sr_l4_ick = { - .name = "sr_l4_ick", - .ops = &clkops_null, /* RMK: missing? */ - .parent = &l4_ick, - .clkdm_name = "core_l4_clkdm", - .recalc = &followparent_recalc, -}; +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H -/* SECURE_32K_FCK clocks */ +int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate); +int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate); +void omap3_clk_lock_dpll5(void); -static struct clk gpt12_fck = { - .name = "gpt12_fck", - .ops = &clkops_null, - .parent = &secure_32k_fck, - .recalc = &followparent_recalc, -}; +extern struct clk *sdrc_ick_p; +extern struct clk *arm_fck_p; -static struct clk wdt1_fck = { - .name = "wdt1_fck", - .ops = &clkops_null, - .parent = &secure_32k_fck, - .recalc = &followparent_recalc, -}; +/* OMAP34xx-specific clkops */ +extern const struct clkops clkops_omap3430es2_ssi_wait; +extern const struct clkops clkops_omap3430es2_hsotgusb_wait; +extern const struct clkops clkops_omap3430es2_dss_usbhost_wait; +extern const struct clkops clkops_noncore_dpll_ops; #endif diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c new file mode 100644 index 000000000000..8bdcc9cc7f9a --- /dev/null +++ b/arch/arm/mach-omap2/clock34xx_data.c @@ -0,0 +1,3289 @@ +/* + * OMAP3 clock data + * + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation + * + * Written by Paul Walmsley + * With many device clock fixes by Kevin Hilman and Jouni Högander + * DPLL bypass clock support added by Roman Tereshonkov + * + */ + +/* + * Virtual clocks are introduced as convenient tools. + * They are sources for other clocks and not supposed + * to be requested from drivers directly. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/clk.h> + +#include <plat/control.h> +#include <plat/clkdev_omap.h> + +#include "clock.h" +#include "clock34xx.h" +#include "cm.h" +#include "cm-regbits-34xx.h" +#include "prm.h" +#include "prm-regbits-34xx.h" + +/* + * clocks + */ + +#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR + +/* Maximum DPLL multiplier, divider values for OMAP3 */ +#define OMAP3_MAX_DPLL_MULT 2048 +#define OMAP3_MAX_DPLL_DIV 128 + +/* + * DPLL1 supplies clock to the MPU. + * DPLL2 supplies clock to the IVA2. + * DPLL3 supplies CORE domain clocks. + * DPLL4 supplies peripheral clocks. + * DPLL5 supplies other peripheral clocks (USBHOST, USIM). + */ + +/* Forward declarations for DPLL bypass clocks */ +static struct clk dpll1_fck; +static struct clk dpll2_fck; + +/* PRM CLOCKS */ + +/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */ +static struct clk omap_32k_fck = { + .name = "omap_32k_fck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, +}; + +static struct clk secure_32k_fck = { + .name = "secure_32k_fck", + .ops = &clkops_null, + .rate = 32768, + .flags = RATE_FIXED, +}; + +/* Virtual source clocks for osc_sys_ck */ +static struct clk virt_12m_ck = { + .name = "virt_12m_ck", + .ops = &clkops_null, + .rate = 12000000, + .flags = RATE_FIXED, +}; + +static struct clk virt_13m_ck = { + .name = "virt_13m_ck", + .ops = &clkops_null, + .rate = 13000000, + .flags = RATE_FIXED, +}; + +static struct clk virt_16_8m_ck = { + .name = "virt_16_8m_ck", + .ops = &clkops_null, + .rate = 16800000, + .flags = RATE_FIXED, +}; + +static struct clk virt_19_2m_ck = { + .name = "virt_19_2m_ck", + .ops = &clkops_null, + .rate = 19200000, + .flags = RATE_FIXED, +}; + +static struct clk virt_26m_ck = { + .name = "virt_26m_ck", + .ops = &clkops_null, + .rate = 26000000, + .flags = RATE_FIXED, +}; + +static struct clk virt_38_4m_ck = { + .name = "virt_38_4m_ck", + .ops = &clkops_null, + .rate = 38400000, + .flags = RATE_FIXED, +}; + +static const struct clksel_rate osc_sys_12m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_13m_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_16_8m_rates[] = { + { .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_19_2m_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_26m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate osc_sys_38_4m_rates[] = { + { .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel osc_sys_clksel[] = { + { .parent = &virt_12m_ck, .rates = osc_sys_12m_rates }, + { .parent = &virt_13m_ck, .rates = osc_sys_13m_rates }, + { .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates }, + { .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates }, + { .parent = &virt_26m_ck, .rates = osc_sys_26m_rates }, + { .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates }, + { .parent = NULL }, +}; + +/* Oscillator clock */ +/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */ +static struct clk osc_sys_ck = { + .name = "osc_sys_ck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_PRM_CLKSEL, + .clksel_mask = OMAP3430_SYS_CLKIN_SEL_MASK, + .clksel = osc_sys_clksel, + /* REVISIT: deal with autoextclkmode? */ + .flags = RATE_FIXED, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate div2_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel sys_clksel[] = { + { .parent = &osc_sys_ck, .rates = div2_rates }, + { .parent = NULL } +}; + +/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */ +/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */ +static struct clk sys_ck = { + .name = "sys_ck", + .ops = &clkops_null, + .parent = &osc_sys_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_PRM_CLKSRC_CTRL, + .clksel_mask = OMAP_SYSCLKDIV_MASK, + .clksel = sys_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk sys_altclk = { + .name = "sys_altclk", + .ops = &clkops_null, +}; + +/* Optional external clock input for some McBSPs */ +static struct clk mcbsp_clks = { + .name = "mcbsp_clks", + .ops = &clkops_null, +}; + +/* PRM EXTERNAL CLOCK OUTPUT */ + +static struct clk sys_clkout1 = { + .name = "sys_clkout1", + .ops = &clkops_omap2_dflt, + .parent = &osc_sys_ck, + .enable_reg = OMAP3430_PRM_CLKOUT_CTRL, + .enable_bit = OMAP3430_CLKOUT_EN_SHIFT, + .recalc = &followparent_recalc, +}; + +/* DPLLS */ + +/* CM CLOCKS */ + +static const struct clksel_rate div16_dpll_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 5, .val = 5, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 7, .val = 7, .flags = RATE_IN_343X }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 9, .val = 9, .flags = RATE_IN_343X }, + { .div = 10, .val = 10, .flags = RATE_IN_343X }, + { .div = 11, .val = 11, .flags = RATE_IN_343X }, + { .div = 12, .val = 12, .flags = RATE_IN_343X }, + { .div = 13, .val = 13, .flags = RATE_IN_343X }, + { .div = 14, .val = 14, .flags = RATE_IN_343X }, + { .div = 15, .val = 15, .flags = RATE_IN_343X }, + { .div = 16, .val = 16, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +/* DPLL1 */ +/* MPU clock source */ +/* Type: DPLL */ +static struct dpll_data dpll1_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), + .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, + .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, + .clk_bypass = &dpll1_fck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), + .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .auto_recal_bit = OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_MPU_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_MPU_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL), + .autoidle_mask = OMAP3430_AUTO_MPU_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), + .idlest_mask = OMAP3430_ST_MPU_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll1_ck = { + .name = "dpll1_ck", + .ops = &clkops_null, + .parent = &sys_ck, + .dpll_data = &dpll1_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll1_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed. + */ +static struct clk dpll1_x2_ck = { + .name = "dpll1_x2_ck", + .ops = &clkops_null, + .parent = &dpll1_ck, + .clkdm_name = "dpll1_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */ +static const struct clksel div16_dpll1_x2m2_clksel[] = { + { .parent = &dpll1_x2_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* + * Does not exist in the TRM - needed to separate the M2 divider from + * bypass selection in mpu_ck + */ +static struct clk dpll1_x2m2_ck = { + .name = "dpll1_x2m2_ck", + .ops = &clkops_null, + .parent = &dpll1_x2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL), + .clksel_mask = OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK, + .clksel = div16_dpll1_x2m2_clksel, + .clkdm_name = "dpll1_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* DPLL2 */ +/* IVA2 clock source */ +/* Type: DPLL */ + +static struct dpll_data dpll2_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), + .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, + .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, + .clk_bypass = &dpll2_fck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), + .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | + (1 << DPLL_LOW_POWER_BYPASS), + .auto_recal_bit = OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL), + .autoidle_mask = OMAP3430_AUTO_IVA2_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL), + .idlest_mask = OMAP3430_ST_IVA2_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll2_ck = { + .name = "dpll2_ck", + .ops = &clkops_noncore_dpll_ops, + .parent = &sys_ck, + .dpll_data = &dpll2_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll2_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +static const struct clksel div16_dpll2_m2x2_clksel[] = { + { .parent = &dpll2_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* + * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT + * or CLKOUTX2. CLKOUT seems most plausible. + */ +static struct clk dpll2_m2_ck = { + .name = "dpll2_m2_ck", + .ops = &clkops_null, + .parent = &dpll2_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, + OMAP3430_CM_CLKSEL2_PLL), + .clksel_mask = OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK, + .clksel = div16_dpll2_m2x2_clksel, + .clkdm_name = "dpll2_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* + * DPLL3 + * Source clock for all interfaces and for some device fclks + * REVISIT: Also supports fast relock bypass - not included below + */ +static struct dpll_data dpll3_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, + .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, + .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_CORE_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_CORE_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), + .autoidle_mask = OMAP3430_AUTO_CORE_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .idlest_mask = OMAP3430_ST_CORE_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll3_ck = { + .name = "dpll3_ck", + .ops = &clkops_null, + .parent = &sys_ck, + .dpll_data = &dpll3_dd, + .round_rate = &omap2_dpll_round_rate, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed + */ +static struct clk dpll3_x2_ck = { + .name = "dpll3_x2_ck", + .ops = &clkops_null, + .parent = &dpll3_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel_rate div31_dpll3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_3430ES2 }, + { .div = 4, .val = 4, .flags = RATE_IN_3430ES2 }, + { .div = 5, .val = 5, .flags = RATE_IN_3430ES2 }, + { .div = 6, .val = 6, .flags = RATE_IN_3430ES2 }, + { .div = 7, .val = 7, .flags = RATE_IN_3430ES2 }, + { .div = 8, .val = 8, .flags = RATE_IN_3430ES2 }, + { .div = 9, .val = 9, .flags = RATE_IN_3430ES2 }, + { .div = 10, .val = 10, .flags = RATE_IN_3430ES2 }, + { .div = 11, .val = 11, .flags = RATE_IN_3430ES2 }, + { .div = 12, .val = 12, .flags = RATE_IN_3430ES2 }, + { .div = 13, .val = 13, .flags = RATE_IN_3430ES2 }, + { .div = 14, .val = 14, .flags = RATE_IN_3430ES2 }, + { .div = 15, .val = 15, .flags = RATE_IN_3430ES2 }, + { .div = 16, .val = 16, .flags = RATE_IN_3430ES2 }, + { .div = 17, .val = 17, .flags = RATE_IN_3430ES2 }, + { .div = 18, .val = 18, .flags = RATE_IN_3430ES2 }, + { .div = 19, .val = 19, .flags = RATE_IN_3430ES2 }, + { .div = 20, .val = 20, .flags = RATE_IN_3430ES2 }, + { .div = 21, .val = 21, .flags = RATE_IN_3430ES2 }, + { .div = 22, .val = 22, .flags = RATE_IN_3430ES2 }, + { .div = 23, .val = 23, .flags = RATE_IN_3430ES2 }, + { .div = 24, .val = 24, .flags = RATE_IN_3430ES2 }, + { .div = 25, .val = 25, .flags = RATE_IN_3430ES2 }, + { .div = 26, .val = 26, .flags = RATE_IN_3430ES2 }, + { .div = 27, .val = 27, .flags = RATE_IN_3430ES2 }, + { .div = 28, .val = 28, .flags = RATE_IN_3430ES2 }, + { .div = 29, .val = 29, .flags = RATE_IN_3430ES2 }, + { .div = 30, .val = 30, .flags = RATE_IN_3430ES2 }, + { .div = 31, .val = 31, .flags = RATE_IN_3430ES2 }, + { .div = 0 }, +}; + +static const struct clksel div31_dpll3m2_clksel[] = { + { .parent = &dpll3_ck, .rates = div31_dpll3_rates }, + { .parent = NULL } +}; + +/* DPLL3 output M2 - primary control point for CORE speed */ +static struct clk dpll3_m2_ck = { + .name = "dpll3_m2_ck", + .ops = &clkops_null, + .parent = &dpll3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK, + .clksel = div31_dpll3m2_clksel, + .clkdm_name = "dpll3_clkdm", + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap3_core_dpll_m2_set_rate, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk core_ck = { + .name = "core_ck", + .ops = &clkops_null, + .parent = &dpll3_m2_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dpll3_m2x2_ck = { + .name = "dpll3_m2x2_ck", + .ops = &clkops_null, + .parent = &dpll3_m2_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static const struct clksel div16_dpll3_clksel[] = { + { .parent = &dpll3_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* This virtual clock is the source for dpll3_m3x2_ck */ +static struct clk dpll3_m3_ck = { + .name = "dpll3_m3_ck", + .ops = &clkops_null, + .parent = &dpll3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_DIV_DPLL3_MASK, + .clksel = div16_dpll3_clksel, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll3_m3x2_ck = { + .name = "dpll3_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll3_m3_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_EMU_CORE_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll3_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static struct clk emu_core_alwon_ck = { + .name = "emu_core_alwon_ck", + .ops = &clkops_null, + .parent = &dpll3_m3x2_ck, + .clkdm_name = "dpll3_clkdm", + .recalc = &followparent_recalc, +}; + +/* DPLL4 */ +/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */ +/* Type: DPLL */ +static struct dpll_data dpll4_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), + .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, + .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + .auto_recal_bit = OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430_PERIPH_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE), + .autoidle_mask = OMAP3430_AUTO_PERIPH_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), + .idlest_mask = OMAP3430_ST_PERIPH_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll4_ck = { + .name = "dpll4_ck", + .ops = &clkops_noncore_dpll_ops, + .parent = &sys_ck, + .dpll_data = &dpll4_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_dpll4_set_rate, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +/* + * This virtual clock provides the CLKOUTX2 output from the DPLL if the + * DPLL isn't bypassed -- + * XXX does this serve any downstream clocks? + */ +static struct clk dpll4_x2_ck = { + .name = "dpll4_x2_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel div16_dpll4_clksel[] = { + { .parent = &dpll4_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +/* This virtual clock is the source for dpll4_m2x2_ck */ +static struct clk dpll4_m2_ck = { + .name = "dpll4_m2_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3), + .clksel_mask = OMAP3430_DIV_96M_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m2x2_ck = { + .name = "dpll4_m2x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m2_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_96M_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* + * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as + * PRM_96M_ALWON_(F)CLK. Two clocks then emerge from the PRM: + * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and + * CM_96K_(F)CLK. + */ +static struct clk omap_96m_alwon_fck = { + .name = "omap_96m_alwon_fck", + .ops = &clkops_null, + .parent = &dpll4_m2x2_ck, + .recalc = &followparent_recalc, +}; + +static struct clk cm_96m_fck = { + .name = "cm_96m_fck", + .ops = &clkops_null, + .parent = &omap_96m_alwon_fck, + .recalc = &followparent_recalc, +}; + +static const struct clksel_rate omap_96m_dpll_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_96m_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_96m_fck_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates }, + { .parent = &sys_ck, .rates = omap_96m_sys_rates }, + { .parent = NULL } +}; + +static struct clk omap_96m_fck = { + .name = "omap_96m_fck", + .ops = &clkops_null, + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_96M_MASK, + .clksel = omap_96m_fck_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* This virtual clock is the source for dpll4_m3x2_ck */ +static struct clk dpll4_m3_ck = { + .name = "dpll4_m3_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_TV_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m3x2_ck = { + .name = "dpll4_m3x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m3_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_TV_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static const struct clksel_rate omap_54m_d4m3x2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_54m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_54m_clksel[] = { + { .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates }, + { .parent = &sys_altclk, .rates = omap_54m_alt_rates }, + { .parent = NULL } +}; + +static struct clk omap_54m_fck = { + .name = "omap_54m_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_54M_MASK, + .clksel = omap_54m_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate omap_48m_cm96m_rates[] = { + { .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate omap_48m_alt_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel omap_48m_clksel[] = { + { .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates }, + { .parent = &sys_altclk, .rates = omap_48m_alt_rates }, + { .parent = NULL } +}; + +static struct clk omap_48m_fck = { + .name = "omap_48m_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_SOURCE_48M_MASK, + .clksel = omap_48m_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk omap_12m_fck = { + .name = "omap_12m_fck", + .ops = &clkops_null, + .parent = &omap_48m_fck, + .fixed_div = 4, + .recalc = &omap2_fixed_divisor_recalc, +}; + +/* This virstual clock is the source for dpll4_m4x2_ck */ +static struct clk dpll4_m4_ck = { + .name = "dpll4_m4_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_DSS1_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, + .set_rate = &omap2_clksel_set_rate, + .round_rate = &omap2_clksel_round_rate, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m4x2_ck = { + .name = "dpll4_m4x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m4_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* This virtual clock is the source for dpll4_m5x2_ck */ +static struct clk dpll4_m5_ck = { + .name = "dpll4_m5_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_CAM_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m5x2_ck = { + .name = "dpll4_m5x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m5_ck, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_CAM_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +/* This virtual clock is the source for dpll4_m6x2_ck */ +static struct clk dpll4_m6_ck = { + .name = "dpll4_m6_ck", + .ops = &clkops_null, + .parent = &dpll4_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_DIV_DPLL4_MASK, + .clksel = div16_dpll4_clksel, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* The PWRDN bit is apparently only available on 3430ES2 and above */ +static struct clk dpll4_m6x2_ck = { + .name = "dpll4_m6x2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll4_m6_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), + .enable_bit = OMAP3430_PWRDN_EMU_PERIPH_SHIFT, + .flags = INVERT_ENABLE, + .clkdm_name = "dpll4_clkdm", + .recalc = &omap3_clkoutx2_recalc, +}; + +static struct clk emu_per_alwon_ck = { + .name = "emu_per_alwon_ck", + .ops = &clkops_null, + .parent = &dpll4_m6x2_ck, + .clkdm_name = "dpll4_clkdm", + .recalc = &followparent_recalc, +}; + +/* DPLL5 */ +/* Supplies 120MHz clock, USIM source clock */ +/* Type: DPLL */ +/* 3430ES2 only */ +static struct dpll_data dpll5_dd = { + .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), + .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, + .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, + .clk_bypass = &sys_ck, + .clk_ref = &sys_ck, + .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, + .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), + .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + .auto_recal_bit = OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT, + .recal_en_bit = OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT, + .recal_st_bit = OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT, + .autoidle_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL), + .autoidle_mask = OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK, + .idlest_reg = OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2), + .idlest_mask = OMAP3430ES2_ST_PERIPH2_CLK_MASK, + .max_multiplier = OMAP3_MAX_DPLL_MULT, + .min_divider = 1, + .max_divider = OMAP3_MAX_DPLL_DIV, + .rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE +}; + +static struct clk dpll5_ck = { + .name = "dpll5_ck", + .ops = &clkops_noncore_dpll_ops, + .parent = &sys_ck, + .dpll_data = &dpll5_dd, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .clkdm_name = "dpll5_clkdm", + .recalc = &omap3_dpll_recalc, +}; + +static const struct clksel div16_dpll5_clksel[] = { + { .parent = &dpll5_ck, .rates = div16_dpll_rates }, + { .parent = NULL } +}; + +static struct clk dpll5_m2_ck = { + .name = "dpll5_m2_ck", + .ops = &clkops_null, + .parent = &dpll5_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5), + .clksel_mask = OMAP3430ES2_DIV_120M_MASK, + .clksel = div16_dpll5_clksel, + .clkdm_name = "dpll5_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* CM EXTERNAL CLOCK OUTPUTS */ + +static const struct clksel_rate clkout2_src_core_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_96m_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate clkout2_src_54m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel clkout2_src_clksel[] = { + { .parent = &core_ck, .rates = clkout2_src_core_rates }, + { .parent = &sys_ck, .rates = clkout2_src_sys_rates }, + { .parent = &cm_96m_fck, .rates = clkout2_src_96m_rates }, + { .parent = &omap_54m_fck, .rates = clkout2_src_54m_rates }, + { .parent = NULL } +}; + +static struct clk clkout2_src_ck = { + .name = "clkout2_src_ck", + .ops = &clkops_omap2_dflt, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP3430_CM_CLKOUT_CTRL, + .enable_bit = OMAP3430_CLKOUT2_EN_SHIFT, + .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, + .clksel_mask = OMAP3430_CLKOUT2SOURCE_MASK, + .clksel = clkout2_src_clksel, + .clkdm_name = "core_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate sys_clkout2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 1, .flags = RATE_IN_343X }, + { .div = 4, .val = 2, .flags = RATE_IN_343X }, + { .div = 8, .val = 3, .flags = RATE_IN_343X }, + { .div = 16, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel sys_clkout2_clksel[] = { + { .parent = &clkout2_src_ck, .rates = sys_clkout2_rates }, + { .parent = NULL }, +}; + +static struct clk sys_clkout2 = { + .name = "sys_clkout2", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP3430_CM_CLKOUT_CTRL, + .clksel_mask = OMAP3430_CLKOUT2_DIV_MASK, + .clksel = sys_clkout2_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* CM OUTPUT CLOCKS */ + +static struct clk corex2_fck = { + .name = "corex2_fck", + .ops = &clkops_null, + .parent = &dpll3_m2x2_ck, + .recalc = &followparent_recalc, +}; + +/* DPLL power domain clock controls */ + +static const struct clksel_rate div4_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel div4_core_clksel[] = { + { .parent = &core_ck, .rates = div4_rates }, + { .parent = NULL } +}; + +/* + * REVISIT: Are these in DPLL power domain or CM power domain? docs + * may be inconsistent here? + */ +static struct clk dpll1_fck = { + .name = "dpll1_fck", + .ops = &clkops_null, + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), + .clksel_mask = OMAP3430_MPU_CLK_SRC_MASK, + .clksel = div4_core_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mpu_ck = { + .name = "mpu_ck", + .ops = &clkops_null, + .parent = &dpll1_x2m2_ck, + .clkdm_name = "mpu_clkdm", + .recalc = &followparent_recalc, +}; + +/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */ +static const struct clksel_rate arm_fck_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 1, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel arm_fck_clksel[] = { + { .parent = &mpu_ck, .rates = arm_fck_rates }, + { .parent = NULL } +}; + +static struct clk arm_fck = { + .name = "arm_fck", + .ops = &clkops_null, + .parent = &mpu_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL), + .clksel_mask = OMAP3430_ST_MPU_CLK_MASK, + .clksel = arm_fck_clksel, + .clkdm_name = "mpu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* XXX What about neon_clkdm ? */ + +/* + * REVISIT: This clock is never specifically defined in the 3430 TRM, + * although it is referenced - so this is a guess + */ +static struct clk emu_mpu_alwon_ck = { + .name = "emu_mpu_alwon_ck", + .ops = &clkops_null, + .parent = &mpu_ck, + .recalc = &followparent_recalc, +}; + +static struct clk dpll2_fck = { + .name = "dpll2_fck", + .ops = &clkops_null, + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), + .clksel_mask = OMAP3430_IVA2_CLK_SRC_MASK, + .clksel = div4_core_clksel, + .recalc = &omap2_clksel_recalc, +}; + +static struct clk iva2_ck = { + .name = "iva2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &dpll2_m2_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .clkdm_name = "iva2_clkdm", + .recalc = &followparent_recalc, +}; + +/* Common interface clocks */ + +static const struct clksel div2_core_clksel[] = { + { .parent = &core_ck, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk l3_ick = { + .name = "l3_ick", + .ops = &clkops_null, + .parent = &core_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_L3_MASK, + .clksel = div2_core_clksel, + .clkdm_name = "core_l3_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel div2_l3_clksel[] = { + { .parent = &l3_ick, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk l4_ick = { + .name = "l4_ick", + .ops = &clkops_null, + .parent = &l3_ick, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_L4_MASK, + .clksel = div2_l3_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, + +}; + +static const struct clksel div2_l4_clksel[] = { + { .parent = &l4_ick, .rates = div2_rates }, + { .parent = NULL } +}; + +static struct clk rm_ick = { + .name = "rm_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_RM_MASK, + .clksel = div2_l4_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* GFX power domain */ + +/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */ + +static const struct clksel gfx_l3_clksel[] = { + { .parent = &l3_ick, .rates = gfx_l3_rates }, + { .parent = NULL } +}; + +/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */ +static struct clk gfx_l3_ck = { + .name = "gfx_l3_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN), + .enable_bit = OMAP_EN_GFX_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk gfx_l3_fck = { + .name = "gfx_l3_fck", + .ops = &clkops_null, + .parent = &gfx_l3_ck, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL), + .clksel_mask = OMAP_CLKSEL_GFX_MASK, + .clksel = gfx_l3_clksel, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gfx_l3_ick = { + .name = "gfx_l3_ick", + .ops = &clkops_null, + .parent = &gfx_l3_ck, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gfx_cg1_ck = { + .name = "gfx_cg1_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES1_EN_2D_SHIFT, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gfx_cg2_ck = { + .name = "gfx_cg2_ck", + .ops = &clkops_omap2_dflt_wait, + .parent = &gfx_l3_fck, /* REVISIT: correct? */ + .enable_reg = OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES1_EN_3D_SHIFT, + .clkdm_name = "gfx_3430es1_clkdm", + .recalc = &followparent_recalc, +}; + +/* SGX power domain - 3430ES2 only */ + +static const struct clksel_rate sgx_core_rates[] = { + { .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 4, .val = 1, .flags = RATE_IN_343X }, + { .div = 6, .val = 2, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel_rate sgx_96m_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel sgx_clksel[] = { + { .parent = &core_ck, .rates = sgx_core_rates }, + { .parent = &cm_96m_fck, .rates = sgx_96m_rates }, + { .parent = NULL }, +}; + +static struct clk sgx_fck = { + .name = "sgx_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES2_CLKSEL_SGX_MASK, + .clksel = sgx_clksel, + .clkdm_name = "sgx_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk sgx_ick = { + .name = "sgx_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT, + .clkdm_name = "sgx_clkdm", + .recalc = &followparent_recalc, +}; + +/* CORE power domain */ + +static struct clk d2d_26m_fck = { + .name = "d2d_26m_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES1_EN_D2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk modem_fck = { + .name = "modem_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MODEM_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sad2d_ick = { + .name = "sad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mad2d_ick = { + .name = "mad2d_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430_EN_MAD2D_SHIFT, + .clkdm_name = "d2d_clkdm", + .recalc = &followparent_recalc, +}; + +static const struct clksel omap343x_gpt_clksel[] = { + { .parent = &omap_32k_fck, .rates = gpt_32k_rates }, + { .parent = &sys_ck, .rates = gpt_sys_rates }, + { .parent = NULL} +}; + +static struct clk gpt10_fck = { + .name = "gpt10_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_GPT10_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT10_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt11_fck = { + .name = "gpt11_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_GPT11_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT11_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk cpefuse_fck = { + .name = "cpefuse_fck", + .ops = &clkops_omap2_dflt, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_CPEFUSE_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk ts_fck = { + .name = "ts_fck", + .ops = &clkops_omap2_dflt, + .parent = &omap_32k_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_TS_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk usbtll_fck = { + .name = "usbtll_fck", + .ops = &clkops_omap2_dflt, + .parent = &dpll5_m2_ck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3), + .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .recalc = &followparent_recalc, +}; + +/* CORE 96M FCLK-derived clocks */ + +static struct clk core_96m_fck = { + .name = "core_96m_fck", + .ops = &clkops_null, + .parent = &omap_96m_fck, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs3_fck = { + .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_fck = { + .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MMC2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mspro_fck = { + .name = "mspro_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MSPRO_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_fck = { + .name = "mmchs_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MMC1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_fck = { + .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_fck = { + .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_fck = { + .name = "i2c_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_I2C1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* + * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck; + * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck. + */ +static const struct clksel_rate common_mcbsp_96m_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel_rate common_mcbsp_mcbsp_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +static const struct clksel mcbsp_15_clksel[] = { + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + +static struct clk mcbsp5_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 5, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP5_CLKS_MASK, + .clksel = mcbsp_15_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp1_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP1_CLKS_MASK, + .clksel = mcbsp_15_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* CORE_48M_FCK-derived clocks */ + +static struct clk core_48m_fck = { + .name = "core_48m_fck", + .ops = &clkops_null, + .parent = &omap_48m_fck, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_fck = { + .name = "mcspi_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_fck = { + .name = "uart2_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_fck = { + .name = "uart1_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_UART1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk fshostusb_fck = { + .name = "fshostusb_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_48m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, + .recalc = &followparent_recalc, +}; + +/* CORE_12M_FCK based clocks */ + +static struct clk core_12m_fck = { + .name = "core_12m_fck", + .ops = &clkops_null, + .parent = &omap_12m_fck, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hdq_fck = { + .name = "hdq_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_12m_fck, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_HDQ_SHIFT, + .recalc = &followparent_recalc, +}; + +/* DPLL3-derived clock */ + +static const struct clksel_rate ssi_ssr_corex2_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 0 } +}; + +static const struct clksel ssi_ssr_clksel[] = { + { .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates }, + { .parent = NULL } +}; + +static struct clk ssi_ssr_fck_3430es1 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap2_dflt, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_ssr_fck_3430es2 = { + .name = "ssi_ssr_fck", + .ops = &clkops_omap3430es2_ssi_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_SSI_MASK, + .clksel = ssi_ssr_clksel, + .clkdm_name = "core_l4_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk ssi_sst_fck_3430es1 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es1, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + +static struct clk ssi_sst_fck_3430es2 = { + .name = "ssi_sst_fck", + .ops = &clkops_null, + .parent = &ssi_ssr_fck_3430es2, + .fixed_div = 2, + .recalc = &omap2_fixed_divisor_recalc, +}; + + + +/* CORE_L3_ICK based clocks */ + +/* + * XXX must add clk_enable/clk_disable for these if standard code won't + * handle it + */ +static struct clk core_l3_ick = { + .name = "core_l3_ick", + .ops = &clkops_null, + .parent = &l3_ick, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es1 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap2_dflt, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hsotgusb_ick_3430es2 = { + .name = "hsotgusb_ick", + .ops = &clkops_omap3430es2_hsotgusb_wait, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HSOTGUSB_SHIFT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sdrc_ick = { + .name = "sdrc_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SDRC_SHIFT, + .flags = ENABLE_ON_INIT, + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpmc_fck = { + .name = "gpmc_fck", + .ops = &clkops_null, + .parent = &core_l3_ick, + .flags = ENABLE_ON_INIT, /* huh? */ + .clkdm_name = "core_l3_clkdm", + .recalc = &followparent_recalc, +}; + +/* SECURITY_L3_ICK based clocks */ + +static struct clk security_l3_ick = { + .name = "security_l3_ick", + .ops = &clkops_null, + .parent = &l3_ick, + .recalc = &followparent_recalc, +}; + +static struct clk pka_ick = { + .name = "pka_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l3_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_PKA_SHIFT, + .recalc = &followparent_recalc, +}; + +/* CORE_L4_ICK based clocks */ + +static struct clk core_l4_ick = { + .name = "core_l4_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk usbtll_ick = { + .name = "usbtll_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3), + .enable_bit = OMAP3430ES2_EN_USBTLL_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs3_ick = { + .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES2_EN_MMC3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* Intersystem Communication Registers - chassis mode only */ +static struct clk icr_ick = { + .name = "icr_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_ICR_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk aes2_ick = { + .name = "aes2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_AES2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk sha12_ick = { + .name = "sha12_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SHA12_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk des2_ick = { + .name = "des2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_DES2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs2_ick = { + .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MMC2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mmchs1_ick = { + .name = "mmchs_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MMC1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mspro_ick = { + .name = "mspro_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MSPRO_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk hdq_ick = { + .name = "hdq_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_HDQ_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI4_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcspi1_ick = { + .name = "mcspi_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCSPI1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_ick = { + .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C3_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_ick = { + .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk i2c1_ick = { + .name = "i2c_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_I2C1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart2_ick = { + .name = "uart2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_UART2_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart1_ick = { + .name = "uart1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_UART1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt11_ick = { + .name = "gpt11_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_GPT11_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt10_ick = { + .name = "gpt10_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_GPT10_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp5_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 5, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCBSP5_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp1_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 1, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MCBSP1_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk fac_ick = { + .name = "fac_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES1_EN_FAC_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mailboxes_ick = { + .name = "mailboxes_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_MAILBOXES_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk omapctrl_ick = { + .name = "omapctrl_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &core_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_OMAPCTRL_SHIFT, + .flags = ENABLE_ON_INIT, + .recalc = &followparent_recalc, +}; + +/* SSI_L4_ICK based clocks */ + +static struct clk ssi_l4_ick = { + .name = "ssi_l4_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk ssi_ick_3430es1 = { + .name = "ssi_ick", + .ops = &clkops_omap2_dflt, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk ssi_ick_3430es2 = { + .name = "ssi_ick", + .ops = &clkops_omap3430es2_ssi_wait, + .parent = &ssi_l4_ick, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430_EN_SSI_SHIFT, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* REVISIT: Technically the TRM claims that this is CORE_CLK based, + * but l4_ick makes more sense to me */ + +static const struct clksel usb_l4_clksel[] = { + { .parent = &l4_ick, .rates = div2_rates }, + { .parent = NULL }, +}; + +static struct clk usb_l4_ick = { + .name = "usb_l4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &l4_ick, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1), + .enable_bit = OMAP3430ES1_EN_FSHOSTUSB_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK, + .clksel = usb_l4_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* SECURITY_L4_ICK2 based clocks */ + +static struct clk security_l4_ick2 = { + .name = "security_l4_ick2", + .ops = &clkops_null, + .parent = &l4_ick, + .recalc = &followparent_recalc, +}; + +static struct clk aes1_ick = { + .name = "aes1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_AES1_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk rng_ick = { + .name = "rng_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_RNG_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk sha11_ick = { + .name = "sha11_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_SHA11_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk des1_ick = { + .name = "des1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &security_l4_ick2, + .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2), + .enable_bit = OMAP3430_EN_DES1_SHIFT, + .recalc = &followparent_recalc, +}; + +/* DSS */ +static struct clk dss1_alwon_fck_3430es1 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap2_dflt, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss1_alwon_fck_3430es2 = { + .name = "dss1_alwon_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &dpll4_m4x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS1_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_tv_fck = { + .name = "dss_tv_fck", + .ops = &clkops_omap2_dflt, + .parent = &omap_54m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_TV_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_96m_fck = { + .name = "dss_96m_fck", + .ops = &clkops_omap2_dflt, + .parent = &omap_96m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_TV_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss2_alwon_fck = { + .name = "dss2_alwon_fck", + .ops = &clkops_omap2_dflt, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_DSS2_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_ick_3430es1 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap2_dflt, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk dss_ick_3430es2 = { + /* Handles both L3 and L4 clocks */ + .name = "dss_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT, + .clkdm_name = "dss_clkdm", + .recalc = &followparent_recalc, +}; + +/* CAM */ + +static struct clk cam_mclk = { + .name = "cam_mclk", + .ops = &clkops_omap2_dflt, + .parent = &dpll4_m5x2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_CAM_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk cam_ick = { + /* Handles both L3 and L4 clocks */ + .name = "cam_ick", + .ops = &clkops_omap2_dflt, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_CAM_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk csi2_96m_fck = { + .name = "csi2_96m_fck", + .ops = &clkops_omap2_dflt, + .parent = &core_96m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_CSI2_SHIFT, + .clkdm_name = "cam_clkdm", + .recalc = &followparent_recalc, +}; + +/* USBHOST - 3430ES2 only */ + +static struct clk usbhost_120m_fck = { + .name = "usbhost_120m_fck", + .ops = &clkops_omap2_dflt, + .parent = &dpll5_m2_ck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST2_SHIFT, + .clkdm_name = "usbhost_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_48m_fck = { + .name = "usbhost_48m_fck", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &omap_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST1_SHIFT, + .clkdm_name = "usbhost_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk usbhost_ick = { + /* Handles both L3 and L4 clocks */ + .name = "usbhost_ick", + .ops = &clkops_omap3430es2_dss_usbhost_wait, + .parent = &l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_USBHOST_SHIFT, + .clkdm_name = "usbhost_clkdm", + .recalc = &followparent_recalc, +}; + +/* WKUP */ + +static const struct clksel_rate usim_96m_rates[] = { + { .div = 2, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 8, .val = 5, .flags = RATE_IN_343X }, + { .div = 10, .val = 6, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel_rate usim_120m_rates[] = { + { .div = 4, .val = 7, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 8, .val = 8, .flags = RATE_IN_343X }, + { .div = 16, .val = 9, .flags = RATE_IN_343X }, + { .div = 20, .val = 10, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel usim_clksel[] = { + { .parent = &omap_96m_fck, .rates = usim_96m_rates }, + { .parent = &dpll5_m2_ck, .rates = usim_120m_rates }, + { .parent = &sys_ck, .rates = div2_rates }, + { .parent = NULL }, +}; + +/* 3430ES2 only */ +static struct clk usim_fck = { + .name = "usim_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430ES2_CLKSEL_USIMOCP_MASK, + .clksel = usim_clksel, + .recalc = &omap2_clksel_recalc, +}; + +/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */ +static struct clk gpt1_fck = { + .name = "gpt1_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT1_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT1_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "wkup_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk wkup_32k_fck = { + .name = "wkup_32k_fck", + .ops = &clkops_null, + .parent = &omap_32k_fck, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_dbck = { + .name = "gpio1_dbck", + .ops = &clkops_omap2_dflt, + .parent = &wkup_32k_fck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_fck = { + .name = "wdt2_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_32k_fck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_WDT2_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wkup_l4_ick = { + .name = "wkup_l4_ick", + .ops = &clkops_null, + .parent = &sys_ck, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +/* 3430ES2 only */ +/* Never specifically named in the TRM, so we have to infer a likely name */ +static struct clk usim_ick = { + .name = "usim_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430ES2_EN_USIMOCP_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_ick = { + .name = "wdt2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT2_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt1_ick = { + .name = "wdt1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio1_ick = { + .name = "gpio1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk omap_32ksync_ick = { + .name = "omap_32ksync_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_32KSYNC_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +/* XXX This clock no longer exists in 3430 TRM rev F */ +static struct clk gpt12_ick = { + .name = "gpt12_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT12_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt1_ick = { + .name = "gpt1_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &wkup_l4_ick, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT1_SHIFT, + .clkdm_name = "wkup_clkdm", + .recalc = &followparent_recalc, +}; + + + +/* PER clock domain */ + +static struct clk per_96m_fck = { + .name = "per_96m_fck", + .ops = &clkops_null, + .parent = &omap_96m_alwon_fck, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk per_48m_fck = { + .name = "per_48m_fck", + .ops = &clkops_null, + .parent = &omap_48m_fck, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart3_fck = { + .name = "uart3_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_48m_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_UART3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt2_fck = { + .name = "gpt2_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT2_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT2_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt3_fck = { + .name = "gpt3_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT3_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT3_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt4_fck = { + .name = "gpt4_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT4_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT4_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt5_fck = { + .name = "gpt5_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT5_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT5_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt6_fck = { + .name = "gpt6_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT6_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT6_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt7_fck = { + .name = "gpt7_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT7_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT7_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt8_fck = { + .name = "gpt8_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT8_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT8_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk gpt9_fck = { + .name = "gpt9_fck", + .ops = &clkops_omap2_dflt_wait, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPT9_SHIFT, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL), + .clksel_mask = OMAP3430_CLKSEL_GPT9_MASK, + .clksel = omap343x_gpt_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk per_32k_alwon_fck = { + .name = "per_32k_alwon_fck", + .ops = &clkops_null, + .parent = &omap_32k_fck, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_dbck = { + .name = "gpio6_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO6_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_dbck = { + .name = "gpio5_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO5_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_dbck = { + .name = "gpio4_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_dbck = { + .name = "gpio3_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_dbck = { + .name = "gpio2_dbck", + .ops = &clkops_omap2_dflt, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_GPIO2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_fck = { + .name = "wdt3_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_32k_alwon_fck, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_WDT3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk per_l4_ick = { + .name = "per_l4_ick", + .ops = &clkops_null, + .parent = &l4_ick, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_ick = { + .name = "gpio6_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO6_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_ick = { + .name = "gpio5_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO5_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_ick = { + .name = "gpio4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_ick = { + .name = "gpio3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_ick = { + .name = "gpio2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPIO2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_ick = { + .name = "wdt3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_WDT3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk uart3_ick = { + .name = "uart3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_UART3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt9_ick = { + .name = "gpt9_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT9_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt8_ick = { + .name = "gpt8_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT8_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt7_ick = { + .name = "gpt7_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT7_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt6_ick = { + .name = "gpt6_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT6_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt5_ick = { + .name = "gpt5_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT5_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt4_ick = { + .name = "gpt4_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt3_ick = { + .name = "gpt3_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk gpt2_ick = { + .name = "gpt2_ick", + .ops = &clkops_omap2_dflt_wait, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_GPT2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp2_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp3_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static struct clk mcbsp4_ick = { + .name = "mcbsp_ick", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .parent = &per_l4_ick, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN), + .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, + .clkdm_name = "per_clkdm", + .recalc = &followparent_recalc, +}; + +static const struct clksel mcbsp_234_clksel[] = { + { .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates }, + { .parent = &mcbsp_clks, .rates = common_mcbsp_mcbsp_rates }, + { .parent = NULL } +}; + +static struct clk mcbsp2_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 2, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP2_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0), + .clksel_mask = OMAP2_MCBSP2_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp3_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 3, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP3_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP3_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk mcbsp4_fck = { + .name = "mcbsp_fck", + .ops = &clkops_omap2_dflt_wait, + .id = 4, + .init = &omap2_init_clksel_parent, + .enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_MCBSP4_SHIFT, + .clksel_reg = OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1), + .clksel_mask = OMAP2_MCBSP4_CLKS_MASK, + .clksel = mcbsp_234_clksel, + .clkdm_name = "per_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* EMU clocks */ + +/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */ + +static const struct clksel_rate emu_src_sys_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_core_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_per_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel_rate emu_src_mpu_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 }, +}; + +static const struct clksel emu_src_clksel[] = { + { .parent = &sys_ck, .rates = emu_src_sys_rates }, + { .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates }, + { .parent = &emu_per_alwon_ck, .rates = emu_src_per_rates }, + { .parent = &emu_mpu_alwon_ck, .rates = emu_src_mpu_rates }, + { .parent = NULL }, +}; + +/* + * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only + * to switch the source of some of the EMU clocks. + * XXX Are there CLKEN bits for these EMU clks? + */ +static struct clk emu_src_ck = { + .name = "emu_src_ck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_MUX_CTRL_MASK, + .clksel = emu_src_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate pclk_emu_rates[] = { + { .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 6, .val = 6, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel pclk_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = pclk_emu_rates }, + { .parent = NULL }, +}; + +static struct clk pclk_fck = { + .name = "pclk_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_PCLK_MASK, + .clksel = pclk_emu_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate pclkx2_emu_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 3, .val = 3, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel pclkx2_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = pclkx2_emu_rates }, + { .parent = NULL }, +}; + +static struct clk pclkx2_fck = { + .name = "pclkx2_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_PCLKX2_MASK, + .clksel = pclkx2_emu_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel atclk_emu_clksel[] = { + { .parent = &emu_src_ck, .rates = div2_rates }, + { .parent = NULL }, +}; + +static struct clk atclk_fck = { + .name = "atclk_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_ATCLK_MASK, + .clksel = atclk_emu_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static struct clk traceclk_src_fck = { + .name = "traceclk_src_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_TRACE_MUX_CTRL_MASK, + .clksel = emu_src_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +static const struct clksel_rate traceclk_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE }, + { .div = 2, .val = 2, .flags = RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_343X }, + { .div = 0 }, +}; + +static const struct clksel traceclk_clksel[] = { + { .parent = &traceclk_src_fck, .rates = traceclk_rates }, + { .parent = NULL }, +}; + +static struct clk traceclk_fck = { + .name = "traceclk_fck", + .ops = &clkops_null, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1), + .clksel_mask = OMAP3430_CLKSEL_TRACECLK_MASK, + .clksel = traceclk_clksel, + .clkdm_name = "emu_clkdm", + .recalc = &omap2_clksel_recalc, +}; + +/* SR clocks */ + +/* SmartReflex fclk (VDD1) */ +static struct clk sr1_fck = { + .name = "sr1_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_SR1_SHIFT, + .recalc = &followparent_recalc, +}; + +/* SmartReflex fclk (VDD2) */ +static struct clk sr2_fck = { + .name = "sr2_fck", + .ops = &clkops_omap2_dflt_wait, + .parent = &sys_ck, + .enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN), + .enable_bit = OMAP3430_EN_SR2_SHIFT, + .recalc = &followparent_recalc, +}; + +static struct clk sr_l4_ick = { + .name = "sr_l4_ick", + .ops = &clkops_null, /* RMK: missing? */ + .parent = &l4_ick, + .clkdm_name = "core_l4_clkdm", + .recalc = &followparent_recalc, +}; + +/* SECURE_32K_FCK clocks */ + +static struct clk gpt12_fck = { + .name = "gpt12_fck", + .ops = &clkops_null, + .parent = &secure_32k_fck, + .recalc = &followparent_recalc, +}; + +static struct clk wdt1_fck = { + .name = "wdt1_fck", + .ops = &clkops_null, + .parent = &secure_32k_fck, + .recalc = &followparent_recalc, +}; + + +/* + * clkdev + */ + +static struct omap_clk omap34xx_clks[] = { + CLK(NULL, "omap_32k_fck", &omap_32k_fck, CK_343X), + CLK(NULL, "virt_12m_ck", &virt_12m_ck, CK_343X), + CLK(NULL, "virt_13m_ck", &virt_13m_ck, CK_343X), + CLK(NULL, "virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2), + CLK(NULL, "virt_19_2m_ck", &virt_19_2m_ck, CK_343X), + CLK(NULL, "virt_26m_ck", &virt_26m_ck, CK_343X), + CLK(NULL, "virt_38_4m_ck", &virt_38_4m_ck, CK_343X), + CLK(NULL, "osc_sys_ck", &osc_sys_ck, CK_343X), + CLK(NULL, "sys_ck", &sys_ck, CK_343X), + CLK(NULL, "sys_altclk", &sys_altclk, CK_343X), + CLK(NULL, "mcbsp_clks", &mcbsp_clks, CK_343X), + CLK(NULL, "sys_clkout1", &sys_clkout1, CK_343X), + CLK(NULL, "dpll1_ck", &dpll1_ck, CK_343X), + CLK(NULL, "dpll1_x2_ck", &dpll1_x2_ck, CK_343X), + CLK(NULL, "dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X), + CLK(NULL, "dpll2_ck", &dpll2_ck, CK_343X), + CLK(NULL, "dpll2_m2_ck", &dpll2_m2_ck, CK_343X), + CLK(NULL, "dpll3_ck", &dpll3_ck, CK_343X), + CLK(NULL, "core_ck", &core_ck, CK_343X), + CLK(NULL, "dpll3_x2_ck", &dpll3_x2_ck, CK_343X), + CLK(NULL, "dpll3_m2_ck", &dpll3_m2_ck, CK_343X), + CLK(NULL, "dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X), + CLK(NULL, "dpll3_m3_ck", &dpll3_m3_ck, CK_343X), + CLK(NULL, "dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X), + CLK("etb", "emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X), + CLK(NULL, "dpll4_ck", &dpll4_ck, CK_343X), + CLK(NULL, "dpll4_x2_ck", &dpll4_x2_ck, CK_343X), + CLK(NULL, "omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X), + CLK(NULL, "omap_96m_fck", &omap_96m_fck, CK_343X), + CLK(NULL, "cm_96m_fck", &cm_96m_fck, CK_343X), + CLK(NULL, "omap_54m_fck", &omap_54m_fck, CK_343X), + CLK(NULL, "omap_48m_fck", &omap_48m_fck, CK_343X), + CLK(NULL, "omap_12m_fck", &omap_12m_fck, CK_343X), + CLK(NULL, "dpll4_m2_ck", &dpll4_m2_ck, CK_343X), + CLK(NULL, "dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X), + CLK(NULL, "dpll4_m3_ck", &dpll4_m3_ck, CK_343X), + CLK(NULL, "dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X), + CLK(NULL, "dpll4_m4_ck", &dpll4_m4_ck, CK_343X), + CLK(NULL, "dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X), + CLK(NULL, "dpll4_m5_ck", &dpll4_m5_ck, CK_343X), + CLK(NULL, "dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X), + CLK(NULL, "dpll4_m6_ck", &dpll4_m6_ck, CK_343X), + CLK(NULL, "dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X), + CLK("etb", "emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X), + CLK(NULL, "dpll5_ck", &dpll5_ck, CK_3430ES2), + CLK(NULL, "dpll5_m2_ck", &dpll5_m2_ck, CK_3430ES2), + CLK(NULL, "clkout2_src_ck", &clkout2_src_ck, CK_343X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_343X), + CLK(NULL, "corex2_fck", &corex2_fck, CK_343X), + CLK(NULL, "dpll1_fck", &dpll1_fck, CK_343X), + CLK(NULL, "mpu_ck", &mpu_ck, CK_343X), + CLK(NULL, "arm_fck", &arm_fck, CK_343X), + CLK("etb", "emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X), + CLK(NULL, "dpll2_fck", &dpll2_fck, CK_343X), + CLK(NULL, "iva2_ck", &iva2_ck, CK_343X), + CLK(NULL, "l3_ick", &l3_ick, CK_343X), + CLK(NULL, "l4_ick", &l4_ick, CK_343X), + CLK(NULL, "rm_ick", &rm_ick, CK_343X), + CLK(NULL, "gfx_l3_ck", &gfx_l3_ck, CK_3430ES1), + CLK(NULL, "gfx_l3_fck", &gfx_l3_fck, CK_3430ES1), + CLK(NULL, "gfx_l3_ick", &gfx_l3_ick, CK_3430ES1), + CLK(NULL, "gfx_cg1_ck", &gfx_cg1_ck, CK_3430ES1), + CLK(NULL, "gfx_cg2_ck", &gfx_cg2_ck, CK_3430ES1), + CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2), + CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2), + CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1), + CLK(NULL, "modem_fck", &modem_fck, CK_343X), + CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X), + CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X), + CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2), + CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2), + CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2), + CLK(NULL, "core_96m_fck", &core_96m_fck, CK_343X), + CLK("mmci-omap-hs.2", "fck", &mmchs3_fck, CK_3430ES2), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_343X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_343X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_343X), + CLK("i2c_omap.3", "fck", &i2c3_fck, CK_343X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_343X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_343X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_343X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_343X), + CLK(NULL, "core_48m_fck", &core_48m_fck, CK_343X), + CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_343X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_343X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_343X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_343X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_343X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_343X), + CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), + CLK(NULL, "core_12m_fck", &core_12m_fck, CK_343X), + CLK("omap_hdq.0", "fck", &hdq_fck, CK_343X), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), + CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es2, CK_3430ES2), + CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es1, CK_3430ES1), + CLK("musb_hdrc", "ick", &hsotgusb_ick_3430es2, CK_3430ES2), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X), + CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X), + CLK(NULL, "pka_ick", &pka_ick, CK_343X), + CLK(NULL, "core_l4_ick", &core_l4_ick, CK_343X), + CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2), + CLK("mmci-omap-hs.2", "ick", &mmchs3_ick, CK_3430ES2), + CLK(NULL, "icr_ick", &icr_ick, CK_343X), + CLK(NULL, "aes2_ick", &aes2_ick, CK_343X), + CLK(NULL, "sha12_ick", &sha12_ick, CK_343X), + CLK(NULL, "des2_ick", &des2_ick, CK_343X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_343X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_343X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_343X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_343X), + CLK("omap2_mcspi.4", "ick", &mcspi4_ick, CK_343X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_343X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_343X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_343X), + CLK("i2c_omap.3", "ick", &i2c3_ick, CK_343X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_343X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_343X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_343X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_343X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_343X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_343X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_343X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_343X), + CLK(NULL, "fac_ick", &fac_ick, CK_3430ES1), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_343X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_343X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_343X), + CLK(NULL, "ssi_ick", &ssi_ick_3430es1, CK_3430ES1), + CLK(NULL, "ssi_ick", &ssi_ick_3430es2, CK_3430ES2), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_3430ES1), + CLK(NULL, "security_l4_ick2", &security_l4_ick2, CK_343X), + CLK(NULL, "aes1_ick", &aes1_ick, CK_343X), + CLK("omap_rng", "ick", &rng_ick, CK_343X), + CLK(NULL, "sha11_ick", &sha11_ick, CK_343X), + CLK(NULL, "des1_ick", &des1_ick, CK_343X), + CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK("omapdss", "dss1_fck", &dss1_alwon_fck_3430es2, CK_3430ES2), + CLK("omapdss", "tv_fck", &dss_tv_fck, CK_343X), + CLK("omapdss", "video_fck", &dss_96m_fck, CK_343X), + CLK("omapdss", "dss2_fck", &dss2_alwon_fck, CK_343X), + CLK("omapdss", "ick", &dss_ick_3430es1, CK_3430ES1), + CLK("omapdss", "ick", &dss_ick_3430es2, CK_3430ES2), + CLK(NULL, "cam_mclk", &cam_mclk, CK_343X), + CLK(NULL, "cam_ick", &cam_ick, CK_343X), + CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X), + CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2), + CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2), + CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2), + CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_343X), + CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_343X), + CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_343X), + CLK("omap_wdt", "fck", &wdt2_fck, CK_343X), + CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_343X), + CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2), + CLK("omap_wdt", "ick", &wdt2_ick, CK_343X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_343X), + CLK(NULL, "gpio1_ick", &gpio1_ick, CK_343X), + CLK(NULL, "omap_32ksync_ick", &omap_32ksync_ick, CK_343X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_343X), + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_343X), + CLK(NULL, "per_96m_fck", &per_96m_fck, CK_343X), + CLK(NULL, "per_48m_fck", &per_48m_fck, CK_343X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_343X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_343X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_343X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_343X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_343X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_343X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_343X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_343X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_343X), + CLK(NULL, "per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X), + CLK(NULL, "gpio6_dbck", &gpio6_dbck, CK_343X), + CLK(NULL, "gpio5_dbck", &gpio5_dbck, CK_343X), + CLK(NULL, "gpio4_dbck", &gpio4_dbck, CK_343X), + CLK(NULL, "gpio3_dbck", &gpio3_dbck, CK_343X), + CLK(NULL, "gpio2_dbck", &gpio2_dbck, CK_343X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_343X), + CLK(NULL, "per_l4_ick", &per_l4_ick, CK_343X), + CLK(NULL, "gpio6_ick", &gpio6_ick, CK_343X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_343X), + CLK(NULL, "gpio4_ick", &gpio4_ick, CK_343X), + CLK(NULL, "gpio3_ick", &gpio3_ick, CK_343X), + CLK(NULL, "gpio2_ick", &gpio2_ick, CK_343X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_343X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_343X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_343X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_343X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_343X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_343X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_343X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_343X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_343X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_343X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_343X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_343X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_343X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_343X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_343X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_343X), + CLK("etb", "emu_src_ck", &emu_src_ck, CK_343X), + CLK(NULL, "pclk_fck", &pclk_fck, CK_343X), + CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_343X), + CLK(NULL, "atclk_fck", &atclk_fck, CK_343X), + CLK(NULL, "traceclk_src_fck", &traceclk_src_fck, CK_343X), + CLK(NULL, "traceclk_fck", &traceclk_fck, CK_343X), + CLK(NULL, "sr1_fck", &sr1_fck, CK_343X), + CLK(NULL, "sr2_fck", &sr2_fck, CK_343X), + CLK(NULL, "sr_l4_ick", &sr_l4_ick, CK_343X), + CLK(NULL, "secure_32k_fck", &secure_32k_fck, CK_343X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_343X), + CLK(NULL, "wdt1_fck", &wdt1_fck, CK_343X), +}; + + +int __init omap2_clk_init(void) +{ + /* struct prcm_config *prcm; */ + struct omap_clk *c; + /* u32 clkrate; */ + u32 cpu_clkflg; + + if (cpu_is_omap34xx()) { + cpu_mask = RATE_IN_343X; + cpu_clkflg = CK_343X; + + /* + * Update this if there are further clock changes between ES2 + * and production parts + */ + if (omap_rev() == OMAP3430_REV_ES1_0) { + /* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */ + cpu_clkflg |= CK_3430ES1; + } else { + cpu_mask |= RATE_IN_3430ES2; + cpu_clkflg |= CK_3430ES2; + } + } + + clk_init(&omap2_clk_functions); + + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + clk_preinit(c->lk.clk); + + for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); + } + + /* REVISIT: Not yet ready for OMAP3 */ +#if 0 + /* Check the MPU rate set by bootloader */ + clkrate = omap2_get_dpll_rate_24xx(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; +#endif + + recalculate_root_clocks(); + + printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10, + (core_ck.rate / 1000000), (arm_fck.rate / 1000000)); + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + /* + * Lock DPLL5 and put it in autoidle. + */ + if (omap_rev() >= OMAP3430_REV_ES2_0) + omap3_clk_lock_dpll5(); + + /* Avoid sleeping during omap3_core_dpll_m2_set_rate() */ + sdrc_ick_p = clk_get(NULL, "sdrc_ick"); + arm_fck_p = clk_get(NULL, "arm_fck"); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c new file mode 100644 index 000000000000..e370868a79a8 --- /dev/null +++ b/arch/arm/mach-omap2/clock44xx.c @@ -0,0 +1,33 @@ +/* + * OMAP4-specific clock framework functions + * + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Rajendra Nayak (rnayak@ti.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include "clock.h" + +struct clk_functions omap2_clk_functions = { + .clk_enable = omap2_clk_enable, + .clk_disable = omap2_clk_disable, + .clk_round_rate = omap2_clk_round_rate, + .clk_set_rate = omap2_clk_set_rate, + .clk_set_parent = omap2_clk_set_parent, + .clk_disable_unused = omap2_clk_disable_unused, +}; + +const struct clkops clkops_noncore_dpll_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, +}; + +void omap2_clk_prepare_for_reboot(void) +{ + return; +} diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h new file mode 100644 index 000000000000..59b9ced4daa1 --- /dev/null +++ b/arch/arm/mach-omap2/clock44xx.h @@ -0,0 +1,15 @@ +/* + * OMAP4 clock function prototypes and macros + * + * Copyright (C) 2009 Texas Instruments, Inc. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H + +#define OMAP4430_MAX_DPLL_MULT 2048 +#define OMAP4430_MAX_DPLL_DIV 128 + +extern const struct clkops clkops_noncore_dpll_ops; + +#endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c new file mode 100644 index 000000000000..2210e227d78a --- /dev/null +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -0,0 +1,2766 @@ +/* + * OMAP4 Clock data + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/clk.h> + +#include <plat/control.h> +#include <plat/clkdev_omap.h> + +#include "clock.h" +#include "clock44xx.h" +#include "cm.h" +#include "cm-regbits-44xx.h" +#include "prm.h" +#include "prm-regbits-44xx.h" + +/* Root clocks */ + +static struct clk extalt_clkin_ck = { + .name = "extalt_clkin_ck", + .rate = 59000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk pad_clks_ck = { + .name = "pad_clks_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk pad_slimbus_core_clks_ck = { + .name = "pad_slimbus_core_clks_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk secure_32k_clk_src_ck = { + .name = "secure_32k_clk_src_ck", + .rate = 32768, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk slimbus_clk = { + .name = "slimbus_clk", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk sys_32k_ck = { + .name = "sys_32k_ck", + .rate = 32768, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk virt_12000000_ck = { + .name = "virt_12000000_ck", + .ops = &clkops_null, + .rate = 12000000, +}; + +static struct clk virt_13000000_ck = { + .name = "virt_13000000_ck", + .ops = &clkops_null, + .rate = 13000000, +}; + +static struct clk virt_16800000_ck = { + .name = "virt_16800000_ck", + .ops = &clkops_null, + .rate = 16800000, +}; + +static struct clk virt_19200000_ck = { + .name = "virt_19200000_ck", + .ops = &clkops_null, + .rate = 19200000, +}; + +static struct clk virt_26000000_ck = { + .name = "virt_26000000_ck", + .ops = &clkops_null, + .rate = 26000000, +}; + +static struct clk virt_27000000_ck = { + .name = "virt_27000000_ck", + .ops = &clkops_null, + .rate = 27000000, +}; + +static struct clk virt_38400000_ck = { + .name = "virt_38400000_ck", + .ops = &clkops_null, + .rate = 38400000, +}; + +static const struct clksel_rate div_1_0_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_1_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_2_rates[] = { + { .div = 1, .val = 2, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_3_rates[] = { + { .div = 1, .val = 3, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_4_rates[] = { + { .div = 1, .val = 4, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_5_rates[] = { + { .div = 1, .val = 5, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_6_rates[] = { + { .div = 1, .val = 6, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel_rate div_1_7_rates[] = { + { .div = 1, .val = 7, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel sys_clkin_sel[] = { + { .parent = &virt_12000000_ck, .rates = div_1_1_rates }, + { .parent = &virt_13000000_ck, .rates = div_1_2_rates }, + { .parent = &virt_16800000_ck, .rates = div_1_3_rates }, + { .parent = &virt_19200000_ck, .rates = div_1_4_rates }, + { .parent = &virt_26000000_ck, .rates = div_1_5_rates }, + { .parent = &virt_27000000_ck, .rates = div_1_6_rates }, + { .parent = &virt_38400000_ck, .rates = div_1_7_rates }, + { .parent = NULL }, +}; + +static struct clk sys_clkin_ck = { + .name = "sys_clkin_ck", + .rate = 38400000, + .clksel = sys_clkin_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_SYS_CLKSEL, + .clksel_mask = OMAP4430_SYS_CLKSEL_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk utmi_phy_clkout_ck = { + .name = "utmi_phy_clkout_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk xclk60mhsp1_ck = { + .name = "xclk60mhsp1_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk xclk60mhsp2_ck = { + .name = "xclk60mhsp2_ck", + .rate = 12000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +static struct clk xclk60motg_ck = { + .name = "xclk60motg_ck", + .rate = 60000000, + .ops = &clkops_null, + .flags = CLOCK_IN_OMAP4430 | ALWAYS_ENABLED, +}; + +/* Module clocks and DPLL outputs */ + +static const struct clksel_rate div2_1to2_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel dpll_sys_ref_clk_div[] = { + { .parent = &sys_clkin_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_sys_ref_clk = { + .name = "dpll_sys_ref_clk", + .parent = &sys_clkin_ck, + .clksel = dpll_sys_ref_clk_div, + .clksel_reg = OMAP4430_CM_DPLL_SYS_REF_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel abe_dpll_refclk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk abe_dpll_refclk_mux_ck = { + .name = "abe_dpll_refclk_mux_ck", + .parent = &dpll_sys_ref_clk, + .clksel = abe_dpll_refclk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_ABE_PLL_REF_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_ABE */ +static struct dpll_data dpll_abe_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_ABE, + .clk_bypass = &sys_clkin_ck, + .clk_ref = &abe_dpll_refclk_mux_ck, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_ABE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_ABE, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_ABE, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_abe_ck = { + .name = "dpll_abe_ck", + .parent = &abe_dpll_refclk_mux_ck, + .dpll_data = &dpll_abe_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_abe_m2x2_ck = { + .name = "dpll_abe_m2x2_ck", + .parent = &dpll_abe_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk abe_24m_fclk = { + .name = "abe_24m_fclk", + .parent = &dpll_abe_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div3_1to4_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 4, .val = 2, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel abe_clk_div[] = { + { .parent = &dpll_abe_m2x2_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk abe_clk = { + .name = "abe_clk", + .parent = &dpll_abe_m2x2_ck, + .clksel = abe_clk_div, + .clksel_reg = OMAP4430_CM_CLKSEL_ABE, + .clksel_mask = OMAP4430_CLKSEL_OPP_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel aess_fclk_div[] = { + { .parent = &abe_clk, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk aess_fclk = { + .name = "aess_fclk", + .parent = &abe_clk, + .clksel = aess_fclk_div, + .clksel_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_AESS_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div31_1to31_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 3, .val = 2, .flags = RATE_IN_4430 }, + { .div = 4, .val = 3, .flags = RATE_IN_4430 }, + { .div = 5, .val = 4, .flags = RATE_IN_4430 }, + { .div = 6, .val = 5, .flags = RATE_IN_4430 }, + { .div = 7, .val = 6, .flags = RATE_IN_4430 }, + { .div = 8, .val = 7, .flags = RATE_IN_4430 }, + { .div = 9, .val = 8, .flags = RATE_IN_4430 }, + { .div = 10, .val = 9, .flags = RATE_IN_4430 }, + { .div = 11, .val = 10, .flags = RATE_IN_4430 }, + { .div = 12, .val = 11, .flags = RATE_IN_4430 }, + { .div = 13, .val = 12, .flags = RATE_IN_4430 }, + { .div = 14, .val = 13, .flags = RATE_IN_4430 }, + { .div = 15, .val = 14, .flags = RATE_IN_4430 }, + { .div = 16, .val = 15, .flags = RATE_IN_4430 }, + { .div = 17, .val = 16, .flags = RATE_IN_4430 }, + { .div = 18, .val = 17, .flags = RATE_IN_4430 }, + { .div = 19, .val = 18, .flags = RATE_IN_4430 }, + { .div = 20, .val = 19, .flags = RATE_IN_4430 }, + { .div = 21, .val = 20, .flags = RATE_IN_4430 }, + { .div = 22, .val = 21, .flags = RATE_IN_4430 }, + { .div = 23, .val = 22, .flags = RATE_IN_4430 }, + { .div = 24, .val = 23, .flags = RATE_IN_4430 }, + { .div = 25, .val = 24, .flags = RATE_IN_4430 }, + { .div = 26, .val = 25, .flags = RATE_IN_4430 }, + { .div = 27, .val = 26, .flags = RATE_IN_4430 }, + { .div = 28, .val = 27, .flags = RATE_IN_4430 }, + { .div = 29, .val = 28, .flags = RATE_IN_4430 }, + { .div = 30, .val = 29, .flags = RATE_IN_4430 }, + { .div = 31, .val = 30, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel dpll_abe_m3_div[] = { + { .parent = &dpll_abe_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_abe_m3_ck = { + .name = "dpll_abe_m3_ck", + .parent = &dpll_abe_ck, + .clksel = dpll_abe_m3_div, + .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_ABE, + .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel core_hsd_byp_clk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &dpll_abe_m3_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk core_hsd_byp_clk_mux_ck = { + .name = "core_hsd_byp_clk_mux_ck", + .parent = &dpll_sys_ref_clk, + .clksel = core_hsd_byp_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_CLKSEL_DPLL_CORE, + .clksel_mask = OMAP4430_DPLL_BYP_CLKSEL_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_CORE */ +static struct dpll_data dpll_core_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_CORE, + .clk_bypass = &core_hsd_byp_clk_mux_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_CORE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_CORE, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_CORE, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_core_ck = { + .name = "dpll_core_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_core_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_null, + .recalc = &omap3_dpll_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_core_m6_div[] = { + { .parent = &dpll_core_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_core_m6_ck = { + .name = "dpll_core_m6_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dbgclk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m6_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk dbgclk_mux_ck = { + .name = "dbgclk_mux_ck", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m2_ck = { + .name = "dpll_core_m2_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_CORE, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk ddrphy_ck = { + .name = "ddrphy_ck", + .parent = &dpll_core_m2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m5_ck = { + .name = "dpll_core_m5_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel div_core_div[] = { + { .parent = &dpll_core_m5_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk div_core_ck = { + .name = "div_core_ck", + .parent = &dpll_core_m5_ck, + .clksel = div_core_div, + .clksel_reg = OMAP4430_CM_CLKSEL_CORE, + .clksel_mask = OMAP4430_CLKSEL_CORE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div4_1to8_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 4, .val = 2, .flags = RATE_IN_4430 }, + { .div = 8, .val = 3, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel div_iva_hs_clk_div[] = { + { .parent = &dpll_core_m5_ck, .rates = div4_1to8_rates }, + { .parent = NULL }, +}; + +static struct clk div_iva_hs_clk = { + .name = "div_iva_hs_clk", + .parent = &dpll_core_m5_ck, + .clksel = div_iva_hs_clk_div, + .clksel_reg = OMAP4430_CM_BYPCLK_DPLL_IVA, + .clksel_mask = OMAP4430_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk div_mpu_hs_clk = { + .name = "div_mpu_hs_clk", + .parent = &dpll_core_m5_ck, + .clksel = div_iva_hs_clk_div, + .clksel_reg = OMAP4430_CM_BYPCLK_DPLL_MPU, + .clksel_mask = OMAP4430_CLKSEL_0_1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m4_ck = { + .name = "dpll_core_m4_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dll_clk_div_ck = { + .name = "dll_clk_div_ck", + .parent = &dpll_core_m4_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_abe_m2_ck = { + .name = "dpll_abe_m2_ck", + .parent = &dpll_abe_ck, + .clksel = dpll_abe_m3_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m3_ck = { + .name = "dpll_core_m3_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_CORE, + .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_core_m7_ck = { + .name = "dpll_core_m7_ck", + .parent = &dpll_core_ck, + .clksel = dpll_core_m6_div, + .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_CORE, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel iva_hsd_byp_clk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &div_iva_hs_clk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk iva_hsd_byp_clk_mux_ck = { + .name = "iva_hsd_byp_clk_mux_ck", + .parent = &dpll_sys_ref_clk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_IVA */ +static struct dpll_data dpll_iva_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_IVA, + .clk_bypass = &iva_hsd_byp_clk_mux_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_IVA, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_IVA, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_IVA, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_iva_ck = { + .name = "dpll_iva_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_iva_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_iva_m4_div[] = { + { .parent = &dpll_iva_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_iva_m4_ck = { + .name = "dpll_iva_m4_ck", + .parent = &dpll_iva_ck, + .clksel = dpll_iva_m4_div, + .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_IVA, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_iva_m5_ck = { + .name = "dpll_iva_m5_ck", + .parent = &dpll_iva_ck, + .clksel = dpll_iva_m4_div, + .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_IVA, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_MPU */ +static struct dpll_data dpll_mpu_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_MPU, + .clk_bypass = &div_mpu_hs_clk, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_MPU, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_MPU, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_MPU, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_mpu_ck = { + .name = "dpll_mpu_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_mpu_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_mpu_m2_div[] = { + { .parent = &dpll_mpu_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_mpu_m2_ck = { + .name = "dpll_mpu_m2_ck", + .parent = &dpll_mpu_ck, + .clksel = dpll_mpu_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk per_hs_clk_div_ck = { + .name = "per_hs_clk_div_ck", + .parent = &dpll_abe_m3_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel per_hsd_byp_clk_mux_sel[] = { + { .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates }, + { .parent = &per_hs_clk_div_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk per_hsd_byp_clk_mux_ck = { + .name = "per_hsd_byp_clk_mux_ck", + .parent = &dpll_sys_ref_clk, + .clksel = per_hsd_byp_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_CLKSEL_DPLL_PER, + .clksel_mask = OMAP4430_DPLL_BYP_CLKSEL_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_PER */ +static struct dpll_data dpll_per_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_PER, + .clk_bypass = &per_hsd_byp_clk_mux_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_PER, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_PER, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_PER, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_per_ck = { + .name = "dpll_per_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_per_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_per_m2_div[] = { + { .parent = &dpll_per_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_per_m2_ck = { + .name = "dpll_per_m2_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m2x2_ck = { + .name = "dpll_per_m2x2_ck", + .parent = &dpll_per_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m3_ck = { + .name = "dpll_per_m3_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_PER, + .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m4_ck = { + .name = "dpll_per_m4_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M4_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m5_ck = { + .name = "dpll_per_m5_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M5_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m6_ck = { + .name = "dpll_per_m6_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M6_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_per_m7_ck = { + .name = "dpll_per_m7_ck", + .parent = &dpll_per_ck, + .clksel = dpll_per_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M7_DPLL_PER, + .clksel_mask = OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_UNIPRO */ +static struct dpll_data dpll_unipro_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_UNIPRO, + .clk_bypass = &dpll_sys_ref_clk, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_UNIPRO, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_UNIPRO, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_unipro_ck = { + .name = "dpll_unipro_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_unipro_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_unipro_m2x2_div[] = { + { .parent = &dpll_unipro_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_unipro_m2x2_ck = { + .name = "dpll_unipro_m2x2_ck", + .parent = &dpll_unipro_ck, + .clksel = dpll_unipro_m2x2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk usb_hs_clk_div_ck = { + .name = "usb_hs_clk_div_ck", + .parent = &dpll_abe_m3_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* DPLL_USB */ +static struct dpll_data dpll_usb_dd = { + .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_USB, + .clk_bypass = &usb_hs_clk_div_ck, + .clk_ref = &dpll_sys_ref_clk, + .control_reg = OMAP4430_CM_CLKMODE_DPLL_USB, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_USB, + .idlest_reg = OMAP4430_CM_IDLEST_DPLL_USB, + .mult_mask = OMAP4430_DPLL_MULT_MASK, + .div1_mask = OMAP4430_DPLL_DIV_MASK, + .enable_mask = OMAP4430_DPLL_EN_MASK, + .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, + .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, + .max_multiplier = OMAP4430_MAX_DPLL_MULT, + .max_divider = OMAP4430_MAX_DPLL_DIV, + .min_divider = 1, +}; + + +static struct clk dpll_usb_ck = { + .name = "dpll_usb_ck", + .parent = &dpll_sys_ref_clk, + .dpll_data = &dpll_usb_dd, + .init = &omap2_init_dpll_parent, + .ops = &clkops_noncore_dpll_ops, + .recalc = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk dpll_usb_clkdcoldo_ck = { + .name = "dpll_usb_clkdcoldo_ck", + .parent = &dpll_usb_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel dpll_usb_m2_div[] = { + { .parent = &dpll_usb_ck, .rates = div31_1to31_rates }, + { .parent = NULL }, +}; + +static struct clk dpll_usb_m2_ck = { + .name = "dpll_usb_m2_ck", + .parent = &dpll_usb_ck, + .clksel = dpll_usb_m2_div, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_USB, + .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel ducati_clk_mux_sel[] = { + { .parent = &div_core_ck, .rates = div_1_0_rates }, + { .parent = &dpll_per_m6_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk ducati_clk_mux_ck = { + .name = "ducati_clk_mux_ck", + .parent = &div_core_ck, + .clksel = ducati_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_12m_fclk = { + .name = "func_12m_fclk", + .parent = &dpll_per_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_24m_clk = { + .name = "func_24m_clk", + .parent = &dpll_per_m2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_24mc_fclk = { + .name = "func_24mc_fclk", + .parent = &dpll_per_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_4to8_rates[] = { + { .div = 4, .val = 0, .flags = RATE_IN_4430 }, + { .div = 8, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel func_48m_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div2_4to8_rates }, + { .parent = NULL }, +}; + +static struct clk func_48m_fclk = { + .name = "func_48m_fclk", + .parent = &dpll_per_m2x2_ck, + .clksel = func_48m_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk func_48mc_fclk = { + .name = "func_48mc_fclk", + .parent = &dpll_per_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_2to4_rates[] = { + { .div = 2, .val = 0, .flags = RATE_IN_4430 }, + { .div = 4, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel func_64m_fclk_div[] = { + { .parent = &dpll_per_m4_ck, .rates = div2_2to4_rates }, + { .parent = NULL }, +}; + +static struct clk func_64m_fclk = { + .name = "func_64m_fclk", + .parent = &dpll_per_m4_ck, + .clksel = func_64m_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_96m_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div2_2to4_rates }, + { .parent = NULL }, +}; + +static struct clk func_96m_fclk = { + .name = "func_96m_fclk", + .parent = &dpll_per_m2x2_ck, + .clksel = func_96m_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel hsmmc6_fclk_sel[] = { + { .parent = &func_64m_fclk, .rates = div_1_0_rates }, + { .parent = &func_96m_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk hsmmc6_fclk = { + .name = "hsmmc6_fclk", + .parent = &func_64m_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_1to8_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 8, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel init_60m_fclk_div[] = { + { .parent = &dpll_usb_m2_ck, .rates = div2_1to8_rates }, + { .parent = NULL }, +}; + +static struct clk init_60m_fclk = { + .name = "init_60m_fclk", + .parent = &dpll_usb_m2_ck, + .clksel = init_60m_fclk_div, + .clksel_reg = OMAP4430_CM_CLKSEL_USB_60MHZ, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel l3_div_div[] = { + { .parent = &div_core_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk l3_div_ck = { + .name = "l3_div_ck", + .parent = &div_core_ck, + .clksel = l3_div_div, + .clksel_reg = OMAP4430_CM_CLKSEL_CORE, + .clksel_mask = OMAP4430_CLKSEL_L3_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel l4_div_div[] = { + { .parent = &l3_div_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk l4_div_ck = { + .name = "l4_div_ck", + .parent = &l3_div_ck, + .clksel = l4_div_div, + .clksel_reg = OMAP4430_CM_CLKSEL_CORE, + .clksel_mask = OMAP4430_CLKSEL_L4_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk lp_clk_div_ck = { + .name = "lp_clk_div_ck", + .parent = &dpll_abe_m2x2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel l4_wkup_clk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &lp_clk_div_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk l4_wkup_clk_mux_ck = { + .name = "l4_wkup_clk_mux_ck", + .parent = &sys_clkin_ck, + .clksel = l4_wkup_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4_WKUP_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel per_abe_nc_fclk_div[] = { + { .parent = &dpll_abe_m2_ck, .rates = div2_1to2_rates }, + { .parent = NULL }, +}; + +static struct clk per_abe_nc_fclk = { + .name = "per_abe_nc_fclk", + .parent = &dpll_abe_m2_ck, + .clksel = per_abe_nc_fclk_div, + .clksel_reg = OMAP4430_CM_SCALE_FCLK, + .clksel_mask = OMAP4430_SCALE_FCLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel mcasp2_fclk_sel[] = { + { .parent = &func_96m_fclk, .rates = div_1_0_rates }, + { .parent = &per_abe_nc_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk mcasp2_fclk = { + .name = "mcasp2_fclk", + .parent = &func_96m_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk mcasp3_fclk = { + .name = "mcasp3_fclk", + .parent = &func_96m_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk ocp_abe_iclk = { + .name = "ocp_abe_iclk", + .parent = &aess_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk per_abe_24m_fclk = { + .name = "per_abe_24m_fclk", + .parent = &dpll_abe_m2_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel pmd_stm_clock_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &dpll_core_m6_ck, .rates = div_1_1_rates }, + { .parent = &dpll_per_m7_ck, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk pmd_stm_clock_mux_ck = { + .name = "pmd_stm_clock_mux_ck", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk pmd_trace_clk_mux_ck = { + .name = "pmd_trace_clk_mux_ck", + .parent = &sys_clkin_ck, + .ops = &clkops_null, + .recalc = &followparent_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static struct clk syc_clk_div_ck = { + .name = "syc_clk_div_ck", + .parent = &sys_clkin_ck, + .clksel = dpll_sys_ref_clk_div, + .clksel_reg = OMAP4430_CM_ABE_DSS_SYS_CLKSEL, + .clksel_mask = OMAP4430_CLKSEL_0_0_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +/* Leaf clocks controlled by modules */ + +static struct clk aes1_ck = { + .name = "aes1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_AES1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk aes2_ck = { + .name = "aes2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_AES2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk aess_ck = { + .name = "aess_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &aess_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk cust_efuse_ck = { + .name = "cust_efuse_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_cefuse_clkdm", + .parent = &sys_clkin_ck, + .recalc = &followparent_recalc, +}; + +static struct clk des3des_ck = { + .name = "des3des_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_DES3DES_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static const struct clksel dmic_sync_mux_sel[] = { + { .parent = &abe_24m_fclk, .rates = div_1_0_rates }, + { .parent = &syc_clk_div_ck, .rates = div_1_1_rates }, + { .parent = &func_24m_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +static struct clk dmic_sync_mux_ck = { + .name = "dmic_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_dmic_abe_gfclk_sel[] = { + { .parent = &dmic_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_dmic_abe_gfclk into dmic_ck */ +static struct clk dmic_ck = { + .name = "dmic_ck", + .parent = &dmic_sync_mux_ck, + .clksel = func_dmic_abe_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk dss_ck = { + .name = "dss_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_dss_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk ducati_ck = { + .name = "ducati_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ducati_clkdm", + .parent = &ducati_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk emif1_ck = { + .name = "emif1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_emif_clkdm", + .parent = &ddrphy_ck, + .recalc = &followparent_recalc, +}; + +static struct clk emif2_ck = { + .name = "emif2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_emif_clkdm", + .parent = &ddrphy_ck, + .recalc = &followparent_recalc, +}; + +static const struct clksel fdif_fclk_div[] = { + { .parent = &dpll_per_m4_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +/* Merged fdif_fclk into fdif_ck */ +static struct clk fdif_ck = { + .name = "fdif_ck", + .parent = &dpll_per_m4_ck, + .clksel = fdif_fclk_div, + .clksel_reg = OMAP4430_CM_CAM_FDIF_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_FCLK_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_CAM_FDIF_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "iss_clkdm", +}; + +static const struct clksel per_sgx_fclk_div[] = { + { .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk per_sgx_fclk = { + .name = "per_sgx_fclk", + .parent = &dpll_per_m2x2_ck, + .clksel = per_sgx_fclk_div, + .clksel_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PER_192M_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel sgx_clk_mux_sel[] = { + { .parent = &dpll_core_m7_ck, .rates = div_1_0_rates }, + { .parent = &per_sgx_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged sgx_clk_mux into gfx_ck */ +static struct clk gfx_ck = { + .name = "gfx_ck", + .parent = &dpll_core_m7_ck, + .clksel = sgx_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SGX_FCLK_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_GFX_GFX_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_gfx_clkdm", +}; + +static struct clk gpio1_ck = { + .name = "gpio1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio2_ck = { + .name = "gpio2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio3_ck = { + .name = "gpio3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio4_ck = { + .name = "gpio4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio5_ck = { + .name = "gpio5_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpio6_ck = { + .name = "gpio6_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk gpmc_ck = { + .name = "gpmc_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3_2_GPMC_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_2_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static const struct clksel dmt1_clk_mux_sel[] = { + { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged dmt1_clk_mux into gptimer1_ck */ +static struct clk gptimer1_ck = { + .name = "gptimer1_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", +}; + +/* Merged cm2_dm10_mux into gptimer10_ck */ +static struct clk gptimer10_ck = { + .name = "gptimer10_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm11_mux into gptimer11_ck */ +static struct clk gptimer11_ck = { + .name = "gptimer11_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm2_mux into gptimer2_ck */ +static struct clk gptimer2_ck = { + .name = "gptimer2_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm3_mux into gptimer3_ck */ +static struct clk gptimer3_ck = { + .name = "gptimer3_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +/* Merged cm2_dm4_mux into gptimer4_ck */ +static struct clk gptimer4_ck = { + .name = "gptimer4_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static const struct clksel timer5_sync_mux_sel[] = { + { .parent = &syc_clk_div_ck, .rates = div_1_0_rates }, + { .parent = &sys_32k_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged timer5_sync_mux into gptimer5_ck */ +static struct clk gptimer5_ck = { + .name = "gptimer5_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer6_sync_mux into gptimer6_ck */ +static struct clk gptimer6_ck = { + .name = "gptimer6_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer7_sync_mux into gptimer7_ck */ +static struct clk gptimer7_ck = { + .name = "gptimer7_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged timer8_sync_mux into gptimer8_ck */ +static struct clk gptimer8_ck = { + .name = "gptimer8_ck", + .parent = &syc_clk_div_ck, + .clksel = timer5_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +/* Merged cm2_dm9_mux into gptimer9_ck */ +static struct clk gptimer9_ck = { + .name = "gptimer9_ck", + .parent = &sys_clkin_ck, + .clksel = dmt1_clk_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static struct clk hdq1w_ck = { + .name = "hdq1w_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_HDQ1W_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_12m_fclk, + .recalc = &followparent_recalc, +}; + +/* Merged hsi_fclk into hsi_ck */ +static struct clk hsi_ck = { + .name = "hsi_ck", + .parent = &dpll_per_m2x2_ck, + .clksel = per_sgx_fclk_div, + .clksel_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_24_25_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", +}; + +static struct clk i2c1_ck = { + .name = "i2c1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c2_ck = { + .name = "i2c2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c3_ck = { + .name = "i2c3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk i2c4_ck = { + .name = "i2c4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk iss_ck = { + .name = "iss_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_CAM_ISS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "iss_clkdm", + .parent = &ducati_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk ivahd_ck = { + .name = "ivahd_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ivahd_clkdm", + .parent = &dpll_iva_m5_ck, + .recalc = &followparent_recalc, +}; + +static struct clk keyboard_ck = { + .name = "keyboard_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk l3_instr_interconnect_ck = { + .name = "l3_instr_interconnect_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk l3_interconnect_3_ck = { + .name = "l3_interconnect_3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INSTR_L3_3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk mcasp_sync_mux_ck = { + .name = "mcasp_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcasp_abe_gfclk_sel[] = { + { .parent = &mcasp_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcasp_abe_gfclk into mcasp_ck */ +static struct clk mcasp_ck = { + .name = "mcasp_ck", + .parent = &mcasp_sync_mux_ck, + .clksel = func_mcasp_abe_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCASP_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp1_sync_mux_ck = { + .name = "mcbsp1_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcbsp1_gfclk_sel[] = { + { .parent = &mcbsp1_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcbsp1_gfclk into mcbsp1_ck */ +static struct clk mcbsp1_ck = { + .name = "mcbsp1_ck", + .parent = &mcbsp1_sync_mux_ck, + .clksel = func_mcbsp1_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp2_sync_mux_ck = { + .name = "mcbsp2_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcbsp2_gfclk_sel[] = { + { .parent = &mcbsp2_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcbsp2_gfclk into mcbsp2_ck */ +static struct clk mcbsp2_ck = { + .name = "mcbsp2_ck", + .parent = &mcbsp2_sync_mux_ck, + .clksel = func_mcbsp2_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp3_sync_mux_ck = { + .name = "mcbsp3_sync_mux_ck", + .parent = &abe_24m_fclk, + .clksel = dmic_sync_mux_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel func_mcbsp3_gfclk_sel[] = { + { .parent = &mcbsp3_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = &slimbus_clk, .rates = div_1_2_rates }, + { .parent = NULL }, +}; + +/* Merged func_mcbsp3_gfclk into mcbsp3_ck */ +static struct clk mcbsp3_ck = { + .name = "mcbsp3_ck", + .parent = &mcbsp3_sync_mux_ck, + .clksel = func_mcbsp3_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", +}; + +static struct clk mcbsp4_sync_mux_ck = { + .name = "mcbsp4_sync_mux_ck", + .parent = &func_96m_fclk, + .clksel = mcasp2_fclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel per_mcbsp4_gfclk_sel[] = { + { .parent = &mcbsp4_sync_mux_ck, .rates = div_1_0_rates }, + { .parent = &pad_clks_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +/* Merged per_mcbsp4_gfclk into mcbsp4_ck */ +static struct clk mcbsp4_ck = { + .name = "mcbsp4_ck", + .parent = &mcbsp4_sync_mux_ck, + .clksel = per_mcbsp4_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_SOURCE_24_24_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", +}; + +static struct clk mcspi1_ck = { + .name = "mcspi1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi2_ck = { + .name = "mcspi2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi3_ck = { + .name = "mcspi3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mcspi4_ck = { + .name = "mcspi4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +/* Merged hsmmc1_fclk into mmc1_ck */ +static struct clk mmc1_ck = { + .name = "mmc1_ck", + .parent = &func_64m_fclk, + .clksel = hsmmc6_fclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", +}; + +/* Merged hsmmc2_fclk into mmc2_ck */ +static struct clk mmc2_ck = { + .name = "mmc2_ck", + .parent = &func_64m_fclk, + .clksel = hsmmc6_fclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_MASK, + .ops = &clkops_omap2_dflt, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, + .enable_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", +}; + +static struct clk mmc3_ck = { + .name = "mmc3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MMCSD3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mmc4_ck = { + .name = "mmc4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MMCSD4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk mmc5_ck = { + .name = "mmc5_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_MMCSD5_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk ocp_wp1_ck = { + .name = "ocp_wp1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_instr_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk pdm_ck = { + .name = "pdm_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &pad_clks_ck, + .recalc = &followparent_recalc, +}; + +static struct clk pkaeip29_ck = { + .name = "pkaeip29_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk rng_ck = { + .name = "rng_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_RNG_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sha2md51_ck = { + .name = "sha2md51_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_secure_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sl2_ck = { + .name = "sl2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_IVAHD_SL2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "ivahd_clkdm", + .parent = &dpll_iva_m5_ck, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus1_ck = { + .name = "slimbus1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &ocp_abe_iclk, + .recalc = &followparent_recalc, +}; + +static struct clk slimbus2_ck = { + .name = "slimbus2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sr_core_ck = { + .name = "sr_core_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_ao_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sr_iva_ck = { + .name = "sr_iva_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_ao_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk sr_mpu_ck = { + .name = "sr_mpu_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_ao_clkdm", + .parent = &l4_wkup_clk_mux_ck, + .recalc = &followparent_recalc, +}; + +static struct clk tesla_ck = { + .name = "tesla_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "tesla_clkdm", + .parent = &dpll_iva_m4_ck, + .recalc = &followparent_recalc, +}; + +static struct clk uart1_ck = { + .name = "uart1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk uart2_ck = { + .name = "uart2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk uart3_ck = { + .name = "uart3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk uart4_ck = { + .name = "uart4_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_per_clkdm", + .parent = &func_48m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk unipro1_ck = { + .name = "unipro1_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &func_96m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_host_ck = { + .name = "usb_host_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &init_60m_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_host_fs_ck = { + .name = "usb_host_fs_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &func_48mc_fclk, + .recalc = &followparent_recalc, +}; + +static struct clk usb_otg_ck = { + .name = "usb_otg_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l3_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usb_tll_ck = { + .name = "usb_tll_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usbphyocp2scp_ck = { + .name = "usbphyocp2scp_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .clkdm_name = "l3_init_clkdm", + .parent = &l4_div_ck, + .recalc = &followparent_recalc, +}; + +static struct clk usim_ck = { + .name = "usim_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk wdt2_ck = { + .name = "wdt2_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "l4_wkup_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +static struct clk wdt3_ck = { + .name = "wdt3_ck", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL, + .enable_bit = OMAP4430_MODULEMODE_SWCTRL, + .clkdm_name = "abe_clkdm", + .parent = &sys_32k_ck, + .recalc = &followparent_recalc, +}; + +/* Remaining optional clocks */ +static const struct clksel otg_60m_gfclk_sel[] = { + { .parent = &utmi_phy_clkout_ck, .rates = div_1_0_rates }, + { .parent = &xclk60motg_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk otg_60m_gfclk_ck = { + .name = "otg_60m_gfclk_ck", + .parent = &utmi_phy_clkout_ck, + .clksel = otg_60m_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_60M_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel stm_clk_div_div[] = { + { .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk stm_clk_div_ck = { + .name = "stm_clk_div_ck", + .parent = &pmd_stm_clock_mux_ck, + .clksel = stm_clk_div_div, + .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PMD_STM_CLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel trace_clk_div_div[] = { + { .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates }, + { .parent = NULL }, +}; + +static struct clk trace_clk_div_ck = { + .name = "trace_clk_div_ck", + .parent = &pmd_trace_clk_mux_ck, + .clksel = trace_clk_div_div, + .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel_rate div2_14to18_rates[] = { + { .div = 14, .val = 0, .flags = RATE_IN_4430 }, + { .div = 18, .val = 1, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel usim_fclk_div[] = { + { .parent = &dpll_per_m4_ck, .rates = div2_14to18_rates }, + { .parent = NULL }, +}; + +static struct clk usim_fclk = { + .name = "usim_fclk", + .parent = &dpll_per_m4_ck, + .clksel = usim_fclk_div, + .clksel_reg = OMAP4430_CM_WKUP_USIM_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_DIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel utmi_p1_gfclk_sel[] = { + { .parent = &init_60m_fclk, .rates = div_1_0_rates }, + { .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk utmi_p1_gfclk_ck = { + .name = "utmi_p1_gfclk_ck", + .parent = &init_60m_fclk, + .clksel = utmi_p1_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_UTMI_P1_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +static const struct clksel utmi_p2_gfclk_sel[] = { + { .parent = &init_60m_fclk, .rates = div_1_0_rates }, + { .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + +static struct clk utmi_p2_gfclk_ck = { + .name = "utmi_p2_gfclk_ck", + .parent = &init_60m_fclk, + .clksel = utmi_p2_gfclk_sel, + .init = &omap2_init_clksel_parent, + .clksel_reg = OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_UTMI_P2_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .flags = CLOCK_IN_OMAP4430, +}; + +/* + * clkdev + */ + +static struct omap_clk omap44xx_clks[] = { + CLK(NULL, "extalt_clkin_ck", &extalt_clkin_ck, CK_443X), + CLK(NULL, "pad_clks_ck", &pad_clks_ck, CK_443X), + CLK(NULL, "pad_slimbus_core_clks_ck", &pad_slimbus_core_clks_ck, CK_443X), + CLK(NULL, "secure_32k_clk_src_ck", &secure_32k_clk_src_ck, CK_443X), + CLK(NULL, "slimbus_clk", &slimbus_clk, CK_443X), + CLK(NULL, "sys_32k_ck", &sys_32k_ck, CK_443X), + CLK(NULL, "virt_12000000_ck", &virt_12000000_ck, CK_443X), + CLK(NULL, "virt_13000000_ck", &virt_13000000_ck, CK_443X), + CLK(NULL, "virt_16800000_ck", &virt_16800000_ck, CK_443X), + CLK(NULL, "virt_19200000_ck", &virt_19200000_ck, CK_443X), + CLK(NULL, "virt_26000000_ck", &virt_26000000_ck, CK_443X), + CLK(NULL, "virt_27000000_ck", &virt_27000000_ck, CK_443X), + CLK(NULL, "virt_38400000_ck", &virt_38400000_ck, CK_443X), + CLK(NULL, "sys_clkin_ck", &sys_clkin_ck, CK_443X), + CLK(NULL, "utmi_phy_clkout_ck", &utmi_phy_clkout_ck, CK_443X), + CLK(NULL, "xclk60mhsp1_ck", &xclk60mhsp1_ck, CK_443X), + CLK(NULL, "xclk60mhsp2_ck", &xclk60mhsp2_ck, CK_443X), + CLK(NULL, "xclk60motg_ck", &xclk60motg_ck, CK_443X), + CLK(NULL, "dpll_sys_ref_clk", &dpll_sys_ref_clk, CK_443X), + CLK(NULL, "abe_dpll_refclk_mux_ck", &abe_dpll_refclk_mux_ck, CK_443X), + CLK(NULL, "dpll_abe_ck", &dpll_abe_ck, CK_443X), + CLK(NULL, "dpll_abe_m2x2_ck", &dpll_abe_m2x2_ck, CK_443X), + CLK(NULL, "abe_24m_fclk", &abe_24m_fclk, CK_443X), + CLK(NULL, "abe_clk", &abe_clk, CK_443X), + CLK(NULL, "aess_fclk", &aess_fclk, CK_443X), + CLK(NULL, "dpll_abe_m3_ck", &dpll_abe_m3_ck, CK_443X), + CLK(NULL, "core_hsd_byp_clk_mux_ck", &core_hsd_byp_clk_mux_ck, CK_443X), + CLK(NULL, "dpll_core_ck", &dpll_core_ck, CK_443X), + CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck, CK_443X), + CLK(NULL, "dbgclk_mux_ck", &dbgclk_mux_ck, CK_443X), + CLK(NULL, "dpll_core_m2_ck", &dpll_core_m2_ck, CK_443X), + CLK(NULL, "ddrphy_ck", &ddrphy_ck, CK_443X), + CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck, CK_443X), + CLK(NULL, "div_core_ck", &div_core_ck, CK_443X), + CLK(NULL, "div_iva_hs_clk", &div_iva_hs_clk, CK_443X), + CLK(NULL, "div_mpu_hs_clk", &div_mpu_hs_clk, CK_443X), + CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck, CK_443X), + CLK(NULL, "dll_clk_div_ck", &dll_clk_div_ck, CK_443X), + CLK(NULL, "dpll_abe_m2_ck", &dpll_abe_m2_ck, CK_443X), + CLK(NULL, "dpll_core_m3_ck", &dpll_core_m3_ck, CK_443X), + CLK(NULL, "dpll_core_m7_ck", &dpll_core_m7_ck, CK_443X), + CLK(NULL, "iva_hsd_byp_clk_mux_ck", &iva_hsd_byp_clk_mux_ck, CK_443X), + CLK(NULL, "dpll_iva_ck", &dpll_iva_ck, CK_443X), + CLK(NULL, "dpll_iva_m4_ck", &dpll_iva_m4_ck, CK_443X), + CLK(NULL, "dpll_iva_m5_ck", &dpll_iva_m5_ck, CK_443X), + CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck, CK_443X), + CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck, CK_443X), + CLK(NULL, "per_hs_clk_div_ck", &per_hs_clk_div_ck, CK_443X), + CLK(NULL, "per_hsd_byp_clk_mux_ck", &per_hsd_byp_clk_mux_ck, CK_443X), + CLK(NULL, "dpll_per_ck", &dpll_per_ck, CK_443X), + CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck, CK_443X), + CLK(NULL, "dpll_per_m2x2_ck", &dpll_per_m2x2_ck, CK_443X), + CLK(NULL, "dpll_per_m3_ck", &dpll_per_m3_ck, CK_443X), + CLK(NULL, "dpll_per_m4_ck", &dpll_per_m4_ck, CK_443X), + CLK(NULL, "dpll_per_m5_ck", &dpll_per_m5_ck, CK_443X), + CLK(NULL, "dpll_per_m6_ck", &dpll_per_m6_ck, CK_443X), + CLK(NULL, "dpll_per_m7_ck", &dpll_per_m7_ck, CK_443X), + CLK(NULL, "dpll_unipro_ck", &dpll_unipro_ck, CK_443X), + CLK(NULL, "dpll_unipro_m2x2_ck", &dpll_unipro_m2x2_ck, CK_443X), + CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck, CK_443X), + CLK(NULL, "dpll_usb_ck", &dpll_usb_ck, CK_443X), + CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck, CK_443X), + CLK(NULL, "dpll_usb_m2_ck", &dpll_usb_m2_ck, CK_443X), + CLK(NULL, "ducati_clk_mux_ck", &ducati_clk_mux_ck, CK_443X), + CLK(NULL, "func_12m_fclk", &func_12m_fclk, CK_443X), + CLK(NULL, "func_24m_clk", &func_24m_clk, CK_443X), + CLK(NULL, "func_24mc_fclk", &func_24mc_fclk, CK_443X), + CLK(NULL, "func_48m_fclk", &func_48m_fclk, CK_443X), + CLK(NULL, "func_48mc_fclk", &func_48mc_fclk, CK_443X), + CLK(NULL, "func_64m_fclk", &func_64m_fclk, CK_443X), + CLK(NULL, "func_96m_fclk", &func_96m_fclk, CK_443X), + CLK(NULL, "hsmmc6_fclk", &hsmmc6_fclk, CK_443X), + CLK(NULL, "init_60m_fclk", &init_60m_fclk, CK_443X), + CLK(NULL, "l3_div_ck", &l3_div_ck, CK_443X), + CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X), + CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X), + CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X), + CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), + CLK(NULL, "mcasp2_fclk", &mcasp2_fclk, CK_443X), + CLK(NULL, "mcasp3_fclk", &mcasp3_fclk, CK_443X), + CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X), + CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X), + CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X), + CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X), + CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X), + CLK(NULL, "aes1_ck", &aes1_ck, CK_443X), + CLK(NULL, "aes2_ck", &aes2_ck, CK_443X), + CLK(NULL, "aess_ck", &aess_ck, CK_443X), + CLK(NULL, "cust_efuse_ck", &cust_efuse_ck, CK_443X), + CLK(NULL, "des3des_ck", &des3des_ck, CK_443X), + CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), + CLK(NULL, "dmic_ck", &dmic_ck, CK_443X), + CLK(NULL, "dss_ck", &dss_ck, CK_443X), + CLK(NULL, "ducati_ck", &ducati_ck, CK_443X), + CLK(NULL, "emif1_ck", &emif1_ck, CK_443X), + CLK(NULL, "emif2_ck", &emif2_ck, CK_443X), + CLK(NULL, "fdif_ck", &fdif_ck, CK_443X), + CLK(NULL, "per_sgx_fclk", &per_sgx_fclk, CK_443X), + CLK(NULL, "gfx_ck", &gfx_ck, CK_443X), + CLK(NULL, "gpio1_ck", &gpio1_ck, CK_443X), + CLK(NULL, "gpio2_ck", &gpio2_ck, CK_443X), + CLK(NULL, "gpio3_ck", &gpio3_ck, CK_443X), + CLK(NULL, "gpio4_ck", &gpio4_ck, CK_443X), + CLK(NULL, "gpio5_ck", &gpio5_ck, CK_443X), + CLK(NULL, "gpio6_ck", &gpio6_ck, CK_443X), + CLK(NULL, "gpmc_ck", &gpmc_ck, CK_443X), + CLK(NULL, "gptimer1_ck", &gptimer1_ck, CK_443X), + CLK(NULL, "gptimer10_ck", &gptimer10_ck, CK_443X), + CLK(NULL, "gptimer11_ck", &gptimer11_ck, CK_443X), + CLK(NULL, "gptimer2_ck", &gptimer2_ck, CK_443X), + CLK(NULL, "gptimer3_ck", &gptimer3_ck, CK_443X), + CLK(NULL, "gptimer4_ck", &gptimer4_ck, CK_443X), + CLK(NULL, "gptimer5_ck", &gptimer5_ck, CK_443X), + CLK(NULL, "gptimer6_ck", &gptimer6_ck, CK_443X), + CLK(NULL, "gptimer7_ck", &gptimer7_ck, CK_443X), + CLK(NULL, "gptimer8_ck", &gptimer8_ck, CK_443X), + CLK(NULL, "gptimer9_ck", &gptimer9_ck, CK_443X), + CLK("omap2_hdq.0", "ick", &hdq1w_ck, CK_443X), + CLK(NULL, "hsi_ck", &hsi_ck, CK_443X), + CLK("i2c_omap.1", "ick", &i2c1_ck, CK_443X), + CLK("i2c_omap.2", "ick", &i2c2_ck, CK_443X), + CLK("i2c_omap.3", "ick", &i2c3_ck, CK_443X), + CLK("i2c_omap.4", "ick", &i2c4_ck, CK_443X), + CLK(NULL, "iss_ck", &iss_ck, CK_443X), + CLK(NULL, "ivahd_ck", &ivahd_ck, CK_443X), + CLK(NULL, "keyboard_ck", &keyboard_ck, CK_443X), + CLK(NULL, "l3_instr_interconnect_ck", &l3_instr_interconnect_ck, CK_443X), + CLK(NULL, "l3_interconnect_3_ck", &l3_interconnect_3_ck, CK_443X), + CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X), + CLK(NULL, "mcasp_ck", &mcasp_ck, CK_443X), + CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_ck, CK_443X), + CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_ck, CK_443X), + CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_ck, CK_443X), + CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_ck, CK_443X), + CLK("omap2_mcspi.1", "fck", &mcspi1_ck, CK_443X), + CLK("omap2_mcspi.2", "fck", &mcspi2_ck, CK_443X), + CLK("omap2_mcspi.3", "fck", &mcspi3_ck, CK_443X), + CLK("omap2_mcspi.4", "fck", &mcspi4_ck, CK_443X), + CLK("mmci-omap-hs.0", "fck", &mmc1_ck, CK_443X), + CLK("mmci-omap-hs.1", "fck", &mmc2_ck, CK_443X), + CLK("mmci-omap-hs.2", "fck", &mmc3_ck, CK_443X), + CLK("mmci-omap-hs.3", "fck", &mmc4_ck, CK_443X), + CLK("mmci-omap-hs.4", "fck", &mmc5_ck, CK_443X), + CLK(NULL, "ocp_wp1_ck", &ocp_wp1_ck, CK_443X), + CLK(NULL, "pdm_ck", &pdm_ck, CK_443X), + CLK(NULL, "pkaeip29_ck", &pkaeip29_ck, CK_443X), + CLK("omap_rng", "ick", &rng_ck, CK_443X), + CLK(NULL, "sha2md51_ck", &sha2md51_ck, CK_443X), + CLK(NULL, "sl2_ck", &sl2_ck, CK_443X), + CLK(NULL, "slimbus1_ck", &slimbus1_ck, CK_443X), + CLK(NULL, "slimbus2_ck", &slimbus2_ck, CK_443X), + CLK(NULL, "sr_core_ck", &sr_core_ck, CK_443X), + CLK(NULL, "sr_iva_ck", &sr_iva_ck, CK_443X), + CLK(NULL, "sr_mpu_ck", &sr_mpu_ck, CK_443X), + CLK(NULL, "tesla_ck", &tesla_ck, CK_443X), + CLK(NULL, "uart1_ck", &uart1_ck, CK_443X), + CLK(NULL, "uart2_ck", &uart2_ck, CK_443X), + CLK(NULL, "uart3_ck", &uart3_ck, CK_443X), + CLK(NULL, "uart4_ck", &uart4_ck, CK_443X), + CLK(NULL, "unipro1_ck", &unipro1_ck, CK_443X), + CLK(NULL, "usb_host_ck", &usb_host_ck, CK_443X), + CLK(NULL, "usb_host_fs_ck", &usb_host_fs_ck, CK_443X), + CLK("musb_hdrc", "ick", &usb_otg_ck, CK_443X), + CLK(NULL, "usb_tll_ck", &usb_tll_ck, CK_443X), + CLK(NULL, "usbphyocp2scp_ck", &usbphyocp2scp_ck, CK_443X), + CLK(NULL, "usim_ck", &usim_ck, CK_443X), + CLK("omap_wdt", "fck", &wdt2_ck, CK_443X), + CLK(NULL, "wdt3_ck", &wdt3_ck, CK_443X), + CLK(NULL, "otg_60m_gfclk_ck", &otg_60m_gfclk_ck, CK_443X), + CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X), + CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X), + CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), + CLK(NULL, "utmi_p1_gfclk_ck", &utmi_p1_gfclk_ck, CK_443X), + CLK(NULL, "utmi_p2_gfclk_ck", &utmi_p2_gfclk_ck, CK_443X), +}; + +int __init omap2_clk_init(void) +{ + /* struct prcm_config *prcm; */ + struct omap_clk *c; + /* u32 clkrate; */ + u32 cpu_clkflg; + + if (cpu_is_omap44xx()) { + cpu_mask = RATE_IN_4430; + cpu_clkflg = CK_443X; + } + + clk_init(&omap2_clk_functions); + + for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); + c++) + clk_preinit(c->lk.clk); + + for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); + c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + /* TODO + omap2_init_clk_clkdm(c->lk.clk); + */ + } + + recalculate_root_clocks(); + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + return 0; +} diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c new file mode 100644 index 000000000000..f69096b88cdb --- /dev/null +++ b/arch/arm/mach-omap2/clock_common_data.c @@ -0,0 +1,39 @@ +/* + * linux/arch/arm/mach-omap2/clock_common_data.c + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Contacts: + * Richard Woodruff <r-woodruff2@ti.com> + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains clock data that is common to both the OMAP2xxx and + * OMAP3xxx clock definition files. + */ + +#include "clock.h" + +/* clksel_rate data common to 24xx/343x */ +const struct clksel_rate gpt_32k_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +const struct clksel_rate gpt_sys_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 0 } +}; + +const struct clksel_rate gfx_l3_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X }, + { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, + { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X }, + { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X }, + { .div = 0 } +}; + diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index fcd82320a6a3..1a45ed1e8ba1 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -2,7 +2,7 @@ * OMAP2/3 clockdomain framework functions * * Copyright (C) 2008 Texas Instruments, Inc. - * Copyright (C) 2008 Nokia Corporation + * Copyright (C) 2008-2009 Nokia Corporation * * Written by Paul Walmsley and Jouni Högander * @@ -10,9 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN -# define DEBUG -#endif +#undef DEBUG #include <linux/module.h> #include <linux/kernel.h> diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h new file mode 100644 index 000000000000..0e67f75aa35c --- /dev/null +++ b/arch/arm/mach-omap2/cm-regbits-44xx.h @@ -0,0 +1,1474 @@ +/* + * OMAP44xx Clock Management register bits + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H +#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H + +#include "cm.h" + + +/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ +#define OMAP4430_ABE_DYNDEP_SHIFT (1 << 3) +#define OMAP4430_ABE_DYNDEP_MASK BITFIELD(3, 3) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, + * CM_TESLA_STATICDEP + */ +#define OMAP4430_ABE_STATDEP_SHIFT (1 << 3) +#define OMAP4430_ABE_STATDEP_MASK BITFIELD(3, 3) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_ALWONCORE_DYNDEP_SHIFT (1 << 16) +#define OMAP4430_ALWONCORE_DYNDEP_MASK BITFIELD(16, 16) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ +#define OMAP4430_ALWONCORE_STATDEP_SHIFT (1 << 16) +#define OMAP4430_ALWONCORE_STATDEP_MASK BITFIELD(16, 16) + +/* + * Used by CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB, + * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE, + * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU + */ +#define OMAP4430_AUTO_DPLL_MODE_SHIFT (1 << 0) +#define OMAP4430_AUTO_DPLL_MODE_MASK BITFIELD(0, 2) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_CEFUSE_DYNDEP_SHIFT (1 << 17) +#define OMAP4430_CEFUSE_DYNDEP_MASK BITFIELD(17, 17) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */ +#define OMAP4430_CEFUSE_STATDEP_SHIFT (1 << 17) +#define OMAP4430_CEFUSE_STATDEP_MASK BITFIELD(17, 17) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK BITFIELD(13, 13) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK BITFIELD(12, 12) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK BITFIELD(9, 9) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK BITFIELD(11, 11) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK BITFIELD(11, 11) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK BITFIELD(12, 12) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK BITFIELD(13, 13) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK BITFIELD(9, 9) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK BITFIELD(11, 11) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK BITFIELD(12, 12) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK BITFIELD(13, 13) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT (1 << 14) +#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK BITFIELD(14, 14) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK BITFIELD(9, 9) + +/* Used by CM_DUCATI_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT (1 << 15) +#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK BITFIELD(15, 15) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT (1 << 20) +#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK BITFIELD(20, 20) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT (1 << 26) +#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK BITFIELD(26, 26) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT (1 << 21) +#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK BITFIELD(21, 21) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT (1 << 27) +#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK BITFIELD(27, 27) + +/* Used by CM_L3INIT_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT (1 << 31) +#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_MASK BITFIELD(31, 31) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT (1 << 13) +#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK BITFIELD(13, 13) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK BITFIELD(12, 12) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT (1 << 28) +#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK BITFIELD(28, 28) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT (1 << 29) +#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK BITFIELD(29, 29) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT (1 << 16) +#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK BITFIELD(16, 16) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT (1 << 17) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK BITFIELD(17, 17) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT (1 << 18) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK BITFIELD(18, 18) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT (1 << 19) +#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK BITFIELD(19, 19) + +/* Used by CM_CAM_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK BITFIELD(8, 8) + +/* Used by CM_IVAHD_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT (1 << 14) +#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_MASK BITFIELD(14, 14) + +/* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_D2D_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_SDMA_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_DSS_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_GFX_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INSTR_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4SEC_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK BITFIELD(8, 8) + +/* Used by CM_CEFUSE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_D2D_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4SEC_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT (1 << 12) +#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK BITFIELD(12, 12) + +/* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK BITFIELD(8, 8) + +/* Used by CM1_ABE_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK BITFIELD(9, 9) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT (1 << 16) +#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK BITFIELD(16, 16) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT (1 << 17) +#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK BITFIELD(17, 17) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT (1 << 18) +#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK BITFIELD(18, 18) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT (1 << 19) +#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK BITFIELD(19, 19) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT (1 << 25) +#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK BITFIELD(25, 25) + +/* Used by CM_EMU_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT (1 << 20) +#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK BITFIELD(20, 20) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT (1 << 21) +#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK BITFIELD(21, 21) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT (1 << 22) +#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK BITFIELD(22, 22) + +/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT (1 << 24) +#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK BITFIELD(24, 24) + +/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_GFX_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK BITFIELD(9, 9) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK BITFIELD(11, 11) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK BITFIELD(10, 10) + +/* Used by CM_ALWON_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT (1 << 9) +#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK BITFIELD(9, 9) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_TESLA_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT (1 << 8) +#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT (1 << 22) +#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK BITFIELD(22, 22) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT (1 << 23) +#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK BITFIELD(23, 23) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT (1 << 24) +#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK BITFIELD(24, 24) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT (1 << 15) +#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK BITFIELD(15, 15) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT (1 << 10) +#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT (1 << 30) +#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK BITFIELD(30, 30) + +/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT (1 << 25) +#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK BITFIELD(25, 25) + +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT (1 << 11) +#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK BITFIELD(11, 11) + +/* + * Used by CM_WKUP_TIMER1_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, + * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, + * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, + * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL, + * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, + * CM1_ABE_TIMER8_CLKCTRL + */ +#define OMAP4430_CLKSEL_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_MASK BITFIELD(24, 24) + +/* + * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL, + * CM_DPLL_SYS_REF_CLKSEL, CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT, + * CM_CLKSEL_USB_60MHZ + */ +#define OMAP4430_CLKSEL_0_0_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_0_0_MASK BITFIELD(0, 0) + +/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */ +#define OMAP4430_CLKSEL_0_1_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_0_1_MASK BITFIELD(0, 1) + +/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */ +#define OMAP4430_CLKSEL_24_25_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_24_25_MASK BITFIELD(24, 25) + +/* Used by CM_L3INIT_USB_OTG_CLKCTRL */ +#define OMAP4430_CLKSEL_60M_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_60M_MASK BITFIELD(24, 24) + +/* Used by CM1_ABE_AESS_CLKCTRL */ +#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_AESS_FCLK_MASK BITFIELD(24, 24) + +/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +#define OMAP4430_CLKSEL_CORE_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_CORE_MASK BITFIELD(0, 0) + +/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_CLKSEL_CORE_1_1_SHIFT (1 << 1) +#define OMAP4430_CLKSEL_CORE_1_1_MASK BITFIELD(1, 1) + +/* Used by CM_WKUP_USIM_CLKCTRL */ +#define OMAP4430_CLKSEL_DIV_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_DIV_MASK BITFIELD(24, 24) + +/* Used by CM_CAM_FDIF_CLKCTRL */ +#define OMAP4430_CLKSEL_FCLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_FCLK_MASK BITFIELD(24, 25) + +/* Used by CM_L4PER_MCBSP4_CLKCTRL */ +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT (1 << 25) +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK BITFIELD(25, 25) + +/* + * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL, + * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, + * CM1_ABE_MCBSP3_CLKCTRL + */ +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT (1 << 26) +#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK BITFIELD(26, 27) + +/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +#define OMAP4430_CLKSEL_L3_SHIFT (1 << 4) +#define OMAP4430_CLKSEL_L3_MASK BITFIELD(4, 4) + +/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT (1 << 2) +#define OMAP4430_CLKSEL_L3_SHADOW_MASK BITFIELD(2, 2) + +/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */ +#define OMAP4430_CLKSEL_L4_SHIFT (1 << 8) +#define OMAP4430_CLKSEL_L4_MASK BITFIELD(8, 8) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP4430_CLKSEL_OPP_SHIFT (1 << 0) +#define OMAP4430_CLKSEL_OPP_MASK BITFIELD(0, 1) + +/* Used by CM_GFX_GFX_CLKCTRL */ +#define OMAP4430_CLKSEL_PER_192M_SHIFT (1 << 25) +#define OMAP4430_CLKSEL_PER_192M_MASK BITFIELD(25, 26) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT (1 << 27) +#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK BITFIELD(27, 29) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK BITFIELD(24, 26) + +/* Used by CM_GFX_GFX_CLKCTRL */ +#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_SGX_FCLK_MASK BITFIELD(24, 24) + +/* + * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, + * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL + */ +#define OMAP4430_CLKSEL_SOURCE_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_SOURCE_MASK BITFIELD(24, 25) + +/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */ +#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_SOURCE_24_24_MASK BITFIELD(24, 24) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_CLKSEL_UTMI_P1_SHIFT (1 << 24) +#define OMAP4430_CLKSEL_UTMI_P1_MASK BITFIELD(24, 24) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_CLKSEL_UTMI_P2_SHIFT (1 << 25) +#define OMAP4430_CLKSEL_UTMI_P2_MASK BITFIELD(25, 25) + +/* + * Used by CM_WKUP_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_D2D_CLKSTCTRL, + * CM_DUCATI_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL, + * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_MEMIF_CLKSTCTRL, + * CM_SDMA_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL, + * CM_L3INIT_CLKSTCTRL, CM_CAM_CLKSTCTRL, CM_CEFUSE_CLKSTCTRL, + * CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3_1_CLKSTCTRL_RESTORE, + * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL_RESTORE, + * CM_L4PER_CLKSTCTRL_RESTORE, CM_MEMIF_CLKSTCTRL_RESTORE, CM_ALWON_CLKSTCTRL, + * CM_IVAHD_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_TESLA_CLKSTCTRL, + * CM1_ABE_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE + */ +#define OMAP4430_CLKTRCTRL_SHIFT (1 << 0) +#define OMAP4430_CLKTRCTRL_MASK BITFIELD(0, 1) + +/* Used by CM_EMU_OVERRIDE_DPLL_CORE */ +#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT (1 << 0) +#define OMAP4430_CORE_DPLL_EMU_DIV_MASK BITFIELD(0, 6) + +/* Used by CM_EMU_OVERRIDE_DPLL_CORE */ +#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT (1 << 8) +#define OMAP4430_CORE_DPLL_EMU_MULT_MASK BITFIELD(8, 18) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_D2D_DYNDEP_SHIFT (1 << 18) +#define OMAP4430_D2D_DYNDEP_MASK BITFIELD(18, 18) + +/* Used by CM_MPU_STATICDEP */ +#define OMAP4430_D2D_STATDEP_SHIFT (1 << 18) +#define OMAP4430_D2D_STATDEP_MASK BITFIELD(18, 18) + +/* + * Used by CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO, + * CM_SSC_DELTAMSTEP_DPLL_USB, CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE, + * CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE, + * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA, + * CM_SSC_DELTAMSTEP_DPLL_MPU + */ +#define OMAP4430_DELTAMSTEP_SHIFT (1 << 0) +#define OMAP4430_DELTAMSTEP_MASK BITFIELD(0, 19) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DLL_OVERRIDE_SHIFT (1 << 2) +#define OMAP4430_DLL_OVERRIDE_MASK BITFIELD(2, 2) + +/* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */ +#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT (1 << 0) +#define OMAP4430_DLL_OVERRIDE_0_0_MASK BITFIELD(0, 0) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DLL_RESET_SHIFT (1 << 3) +#define OMAP4430_DLL_RESET_MASK BITFIELD(3, 3) + +/* + * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + */ +#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT (1 << 23) +#define OMAP4430_DPLL_BYP_CLKSEL_MASK BITFIELD(23, 23) + +/* Used by CM_CLKDCOLDO_DPLL_USB */ +#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK BITFIELD(8, 8) + +/* Used by CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_CORE */ +#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT (1 << 20) +#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK BITFIELD(20, 20) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT (1 << 0) +#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK BITFIELD(8, 8) + +/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */ +#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT (1 << 10) +#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK BITFIELD(10, 10) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT (1 << 0) +#define OMAP4430_DPLL_CLKOUT_DIV_MASK BITFIELD(0, 4) + +/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */ +#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT (1 << 0) +#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK BITFIELD(0, 6) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, + * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, + * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK BITFIELD(5, 5) + +/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */ +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT (1 << 7) +#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK BITFIELD(7, 7) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE, + * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK BITFIELD(8, 8) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT (1 << 8) +#define OMAP4430_DPLL_CORE_DPLL_EN_MASK BITFIELD(8, 10) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT (1 << 11) +#define OMAP4430_DPLL_CORE_M2_DIV_MASK BITFIELD(11, 15) + +/* Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT (1 << 3) +#define OMAP4430_DPLL_CORE_M5_DIV_MASK BITFIELD(3, 7) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT (1 << 1) +#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_MASK BITFIELD(1, 1) + +/* + * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + */ +#define OMAP4430_DPLL_DIV_SHIFT (1 << 0) +#define OMAP4430_DPLL_DIV_MASK BITFIELD(0, 6) + +/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */ +#define OMAP4430_DPLL_DIV_0_7_SHIFT (1 << 0) +#define OMAP4430_DPLL_DIV_0_7_MASK BITFIELD(0, 7) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT (1 << 8) +#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK BITFIELD(8, 8) + +/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */ +#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT (1 << 3) +#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK BITFIELD(3, 3) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_EN_SHIFT (1 << 0) +#define OMAP4430_DPLL_EN_MASK BITFIELD(0, 2) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_LPMODE_EN_SHIFT (1 << 10) +#define OMAP4430_DPLL_LPMODE_EN_MASK BITFIELD(10, 10) + +/* + * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, + * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, + * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU + */ +#define OMAP4430_DPLL_MULT_SHIFT (1 << 8) +#define OMAP4430_DPLL_MULT_MASK BITFIELD(8, 18) + +/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */ +#define OMAP4430_DPLL_MULT_USB_SHIFT (1 << 8) +#define OMAP4430_DPLL_MULT_USB_MASK BITFIELD(8, 19) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_REGM4XEN_SHIFT (1 << 11) +#define OMAP4430_DPLL_REGM4XEN_MASK BITFIELD(11, 11) + +/* Used by CM_CLKSEL_DPLL_USB */ +#define OMAP4430_DPLL_SD_DIV_SHIFT (1 << 24) +#define OMAP4430_DPLL_SD_DIV_MASK BITFIELD(24, 31) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_SSC_ACK_SHIFT (1 << 13) +#define OMAP4430_DPLL_SSC_ACK_MASK BITFIELD(13, 13) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT (1 << 14) +#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK BITFIELD(14, 14) + +/* + * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB, + * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, + * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU + */ +#define OMAP4430_DPLL_SSC_EN_SHIFT (1 << 12) +#define OMAP4430_DPLL_SSC_EN_MASK BITFIELD(12, 12) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP4430_DSS_DYNDEP_SHIFT (1 << 8) +#define OMAP4430_DSS_DYNDEP_MASK BITFIELD(8, 8) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_MPU_STATICDEP + */ +#define OMAP4430_DSS_STATDEP_SHIFT (1 << 8) +#define OMAP4430_DSS_STATDEP_MASK BITFIELD(8, 8) + +/* Used by CM_L3_2_DYNAMICDEP */ +#define OMAP4430_DUCATI_DYNDEP_SHIFT (1 << 0) +#define OMAP4430_DUCATI_DYNDEP_MASK BITFIELD(0, 0) + +/* Used by CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP */ +#define OMAP4430_DUCATI_STATDEP_SHIFT (1 << 0) +#define OMAP4430_DUCATI_STATDEP_MASK BITFIELD(0, 0) + +/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_FREQ_UPDATE_SHIFT (1 << 0) +#define OMAP4430_FREQ_UPDATE_MASK BITFIELD(0, 0) + +/* Used by CM_L3_2_DYNAMICDEP */ +#define OMAP4430_GFX_DYNDEP_SHIFT (1 << 10) +#define OMAP4430_GFX_DYNDEP_MASK BITFIELD(10, 10) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP4430_GFX_STATDEP_SHIFT (1 << 10) +#define OMAP4430_GFX_STATDEP_MASK BITFIELD(10, 10) + +/* Used by CM_SHADOW_FREQ_CONFIG2 */ +#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT (1 << 0) +#define OMAP4430_GPMC_FREQ_UPDATE_MASK BITFIELD(0, 0) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT (1 << 0) +#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK BITFIELD(0, 4) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT (1 << 5) +#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK BITFIELD(5, 5) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT (1 << 8) +#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK BITFIELD(8, 8) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT (1 << 12) +#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK BITFIELD(12, 12) + +/* + * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, + * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, + * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, + * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, + * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, + * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, + * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, + * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, + * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, + * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, + * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, + * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, + * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, + * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, + * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, + * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, + * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, + * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, + * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, + * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, + * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, + * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, + * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, + * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, + * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE, + * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, + * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL, + * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, + * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL, + * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, + * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL, + * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL, + * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, + * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL + */ +#define OMAP4430_IDLEST_SHIFT (1 << 16) +#define OMAP4430_IDLEST_MASK BITFIELD(16, 17) + +/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_ISS_DYNDEP_SHIFT (1 << 9) +#define OMAP4430_ISS_DYNDEP_MASK BITFIELD(9, 9) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_ISS_STATDEP_SHIFT (1 << 9) +#define OMAP4430_ISS_STATDEP_MASK BITFIELD(9, 9) + +/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ +#define OMAP4430_IVAHD_DYNDEP_SHIFT (1 << 2) +#define OMAP4430_IVAHD_DYNDEP_MASK BITFIELD(2, 2) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_DSS_STATICDEP, CM_MPU_STATICDEP, + * CM_TESLA_STATICDEP + */ +#define OMAP4430_IVAHD_STATDEP_SHIFT (1 << 2) +#define OMAP4430_IVAHD_STATDEP_MASK BITFIELD(2, 2) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP4430_L3INIT_DYNDEP_SHIFT (1 << 7) +#define OMAP4430_L3INIT_DYNDEP_MASK BITFIELD(7, 7) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L3INIT_STATDEP_SHIFT (1 << 7) +#define OMAP4430_L3INIT_STATDEP_MASK BITFIELD(7, 7) + +/* + * Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, + * CM_DSS_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + */ +#define OMAP4430_L3_1_DYNDEP_SHIFT (1 << 5) +#define OMAP4430_L3_1_DYNDEP_MASK BITFIELD(5, 5) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L3_1_STATDEP_SHIFT (1 << 5) +#define OMAP4430_L3_1_STATDEP_MASK BITFIELD(5, 5) + +/* + * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, + * CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_SDMA_DYNAMICDEP, + * CM_GFX_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, + * CM_CAM_DYNAMICDEP, CM_IVAHD_DYNAMICDEP + */ +#define OMAP4430_L3_2_DYNDEP_SHIFT (1 << 6) +#define OMAP4430_L3_2_DYNDEP_MASK BITFIELD(6, 6) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L3_2_STATDEP_SHIFT (1 << 6) +#define OMAP4430_L3_2_STATDEP_MASK BITFIELD(6, 6) + +/* Used by CM_L3_1_DYNAMICDEP */ +#define OMAP4430_L4CFG_DYNDEP_SHIFT (1 << 12) +#define OMAP4430_L4CFG_DYNDEP_MASK BITFIELD(12, 12) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, + * CM_TESLA_STATICDEP + */ +#define OMAP4430_L4CFG_STATDEP_SHIFT (1 << 12) +#define OMAP4430_L4CFG_STATDEP_MASK BITFIELD(12, 12) + +/* Used by CM_L3_2_DYNAMICDEP */ +#define OMAP4430_L4PER_DYNDEP_SHIFT (1 << 13) +#define OMAP4430_L4PER_DYNDEP_MASK BITFIELD(13, 13) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L4PER_STATDEP_SHIFT (1 << 13) +#define OMAP4430_L4PER_STATDEP_MASK BITFIELD(13, 13) + +/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ +#define OMAP4430_L4SEC_DYNDEP_SHIFT (1 << 14) +#define OMAP4430_L4SEC_DYNDEP_MASK BITFIELD(14, 14) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP + */ +#define OMAP4430_L4SEC_STATDEP_SHIFT (1 << 14) +#define OMAP4430_L4SEC_STATDEP_MASK BITFIELD(14, 14) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_L4WKUP_DYNDEP_SHIFT (1 << 15) +#define OMAP4430_L4WKUP_DYNDEP_MASK BITFIELD(15, 15) + +/* + * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_L4WKUP_STATDEP_SHIFT (1 << 15) +#define OMAP4430_L4WKUP_STATDEP_MASK BITFIELD(15, 15) + +/* + * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_MPU_DYNAMICDEP + */ +#define OMAP4430_MEMIF_DYNDEP_SHIFT (1 << 4) +#define OMAP4430_MEMIF_DYNDEP_MASK BITFIELD(4, 4) + +/* + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, + * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP, + * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP, + * CM_MPU_STATICDEP, CM_TESLA_STATICDEP + */ +#define OMAP4430_MEMIF_STATDEP_SHIFT (1 << 4) +#define OMAP4430_MEMIF_STATDEP_MASK BITFIELD(4, 4) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, + * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, + * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, + * CM_SSC_MODFREQDIV_DPLL_MPU + */ +#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT (1 << 8) +#define OMAP4430_MODFREQDIV_EXPONENT_MASK BITFIELD(8, 10) + +/* + * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, + * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, + * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, + * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, + * CM_SSC_MODFREQDIV_DPLL_MPU + */ +#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT (1 << 0) +#define OMAP4430_MODFREQDIV_MANTISSA_MASK BITFIELD(0, 6) + +/* + * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL, + * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL, + * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL, + * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL, + * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL, + * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, + * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL, + * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, + * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, + * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, + * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL, + * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL, + * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL, + * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL, + * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL, + * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, + * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, + * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, + * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, + * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, + * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, + * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, + * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, + * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, + * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, + * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL, + * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, + * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, + * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, + * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, + * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, + * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE, + * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, + * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL, + * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, + * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL, + * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, + * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL, + * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL, + * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, + * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL + */ +#define OMAP4430_MODULEMODE_SHIFT (1 << 0) +#define OMAP4430_MODULEMODE_MASK BITFIELD(0, 1) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_WKUP_BANDGAP_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_CLK32K_MASK BITFIELD(9, 9) + +/* Used by CM_CAM_ISS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK BITFIELD(8, 8) + +/* + * Used by CM_WKUP_GPIO1_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL, + * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, + * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, + * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE, + * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE + */ +#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_DBCLK_MASK BITFIELD(8, 8) + +/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_DSSCLK_MASK BITFIELD(8, 8) + +/* Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_FCLK0_MASK BITFIELD(8, 8) + +/* Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_FCLK1_MASK BITFIELD(9, 9) + +/* Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_FCLK2_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT (1 << 15) +#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK BITFIELD(15, 15) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT (1 << 13) +#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK BITFIELD(13, 13) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT (1 << 14) +#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK BITFIELD(14, 14) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT (1 << 11) +#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT (1 << 12) +#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK BITFIELD(12, 12) + +/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK BITFIELD(8, 8) + +/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_PHY_48M_MASK BITFIELD(8, 8) + +/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK BITFIELD(10, 10) + +/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT (1 << 11) +#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK BITFIELD(11, 11) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_DSS_DSS_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT (1 << 11) +#define OMAP4430_OPTFCLKEN_TV_CLK_MASK BITFIELD(11, 11) + +/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK BITFIELD(8, 8) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT (1 << 9) +#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK BITFIELD(9, 9) + +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT (1 << 10) +#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK BITFIELD(10, 10) + +/* Used by CM_L3INIT_USB_OTG_CLKCTRL */ +#define OMAP4430_OPTFCLKEN_XCLK_SHIFT (1 << 8) +#define OMAP4430_OPTFCLKEN_XCLK_MASK BITFIELD(8, 8) + +/* Used by CM_EMU_OVERRIDE_DPLL_PER, CM_EMU_OVERRIDE_DPLL_CORE */ +#define OMAP4430_OVERRIDE_ENABLE_SHIFT (1 << 19) +#define OMAP4430_OVERRIDE_ENABLE_MASK BITFIELD(19, 19) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP4430_PAD_CLKS_GATE_SHIFT (1 << 8) +#define OMAP4430_PAD_CLKS_GATE_MASK BITFIELD(8, 8) + +/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */ +#define OMAP4430_PERF_CURRENT_SHIFT (1 << 0) +#define OMAP4430_PERF_CURRENT_MASK BITFIELD(0, 7) + +/* + * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3, + * CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD, + * CM_IVA_DVFS_PERF_TESLA + */ +#define OMAP4430_PERF_REQ_SHIFT (1 << 0) +#define OMAP4430_PERF_REQ_MASK BITFIELD(0, 7) + +/* Used by CM_EMU_OVERRIDE_DPLL_PER */ +#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT (1 << 0) +#define OMAP4430_PER_DPLL_EMU_DIV_MASK BITFIELD(0, 6) + +/* Used by CM_EMU_OVERRIDE_DPLL_PER */ +#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT (1 << 8) +#define OMAP4430_PER_DPLL_EMU_MULT_MASK BITFIELD(8, 18) + +/* Used by CM_RESTORE_ST */ +#define OMAP4430_PHASE1_COMPLETED_SHIFT (1 << 0) +#define OMAP4430_PHASE1_COMPLETED_MASK BITFIELD(0, 0) + +/* Used by CM_RESTORE_ST */ +#define OMAP4430_PHASE2A_COMPLETED_SHIFT (1 << 1) +#define OMAP4430_PHASE2A_COMPLETED_MASK BITFIELD(1, 1) + +/* Used by CM_RESTORE_ST */ +#define OMAP4430_PHASE2B_COMPLETED_SHIFT (1 << 2) +#define OMAP4430_PHASE2B_COMPLETED_MASK BITFIELD(2, 2) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT (1 << 20) +#define OMAP4430_PMD_STM_MUX_CTRL_MASK BITFIELD(20, 21) + +/* Used by CM_EMU_DEBUGSS_CLKCTRL */ +#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT (1 << 22) +#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK BITFIELD(22, 23) + +/* Used by CM_DYN_DEP_PRESCAL */ +#define OMAP4430_PRESCAL_SHIFT (1 << 0) +#define OMAP4430_PRESCAL_MASK BITFIELD(0, 5) + +/* Used by REVISION_CM2, REVISION_CM1 */ +#define OMAP4430_REV_SHIFT (1 << 0) +#define OMAP4430_REV_MASK BITFIELD(0, 7) + +/* + * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE + */ +#define OMAP4430_SAR_MODE_SHIFT (1 << 4) +#define OMAP4430_SAR_MODE_MASK BITFIELD(4, 4) + +/* Used by CM_SCALE_FCLK */ +#define OMAP4430_SCALE_FCLK_SHIFT (1 << 0) +#define OMAP4430_SCALE_FCLK_MASK BITFIELD(0, 0) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_SDMA_DYNDEP_SHIFT (1 << 11) +#define OMAP4430_SDMA_DYNDEP_MASK BITFIELD(11, 11) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP4430_SDMA_STATDEP_SHIFT (1 << 11) +#define OMAP4430_SDMA_STATDEP_MASK BITFIELD(11, 11) + +/* Used by CM_CLKSEL_ABE */ +#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT (1 << 10) +#define OMAP4430_SLIMBUS_CLK_GATE_MASK BITFIELD(10, 10) + +/* + * Used by CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, + * CM_DUCATI_DUCATI_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL, + * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL, + * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, + * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, + * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, + * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL, + * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL, + * CM_CAM_ISS_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, + * CM_IVAHD_IVAHD_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, + * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL + */ +#define OMAP4430_STBYST_SHIFT (1 << 18) +#define OMAP4430_STBYST_MASK BITFIELD(18, 18) + +/* + * Used by CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB, + * CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY, + * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU + */ +#define OMAP4430_ST_DPLL_CLK_SHIFT (1 << 0) +#define OMAP4430_ST_DPLL_CLK_MASK BITFIELD(0, 0) + +/* Used by CM_CLKDCOLDO_DPLL_USB */ +#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT (1 << 9) +#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE, + * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU + */ +#define OMAP4430_ST_DPLL_CLKOUT_SHIFT (1 << 9) +#define OMAP4430_ST_DPLL_CLKOUT_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE, + * CM_DIV_M3_DPLL_CORE + */ +#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT (1 << 9) +#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK BITFIELD(9, 9) + +/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */ +#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT (1 << 11) +#define OMAP4430_ST_DPLL_CLKOUTX2_MASK BITFIELD(11, 11) + +/* + * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE, + * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE, + * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE, + * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK BITFIELD(9, 9) + +/* + * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE, + * CM_DIV_M7_DPLL_CORE + */ +#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT (1 << 9) +#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK BITFIELD(9, 9) + +/* Used by CM_SYS_CLKSEL */ +#define OMAP4430_SYS_CLKSEL_SHIFT (1 << 0) +#define OMAP4430_SYS_CLKSEL_MASK BITFIELD(0, 2) + +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4430_TESLA_DYNDEP_SHIFT (1 << 1) +#define OMAP4430_TESLA_DYNDEP_MASK BITFIELD(1, 1) + +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */ +#define OMAP4430_TESLA_STATDEP_SHIFT (1 << 1) +#define OMAP4430_TESLA_STATDEP_MASK BITFIELD(1, 1) + +/* + * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, + * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + */ +#define OMAP4430_WINDOWSIZE_SHIFT (1 << 24) +#define OMAP4430_WINDOWSIZE_MASK BITFIELD(24, 27) +#endif diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c index 8eb2dab8c7db..58e4a1c557d8 100644 --- a/arch/arm/mach-omap2/cm.c +++ b/arch/arm/mach-omap2/cm.c @@ -21,6 +21,8 @@ #include <asm/atomic.h> +#include <plat/common.h> + #include "cm.h" #include "cm-regbits-24xx.h" #include "cm-regbits-34xx.h" @@ -61,9 +63,8 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift) mask = 1 << idlest_shift; /* XXX should be OMAP2 CM */ - while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) && - (i++ < MAX_MODULE_READY_TIME)) - udelay(1); + omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena), + MAX_MODULE_READY_TIME, i); return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a2fcfcc253cc..90a4086fbdf4 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -4,8 +4,8 @@ /* * OMAP2/3 Clock Management (CM) register definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley * @@ -22,6 +22,12 @@ OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg)) #define OMAP34XX_CM_REGADDR(module, reg) \ OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg)) +#define OMAP44XX_CM1_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (module) + (reg)) +#define OMAP44XX_CM2_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (module) + (reg)) + +#include "cm44xx.h" /* * Architecture-specific global CM registers @@ -89,6 +95,11 @@ #define OMAP3430_CM_CLKSEL2_EMU 0x0050 #define OMAP3430_CM_CLKSEL3_EMU 0x0054 +/* CM2.CEFUSE_CM2 register offsets */ + +/* OMAP4 modulemode control */ +#define OMAP4430_MODULEMODE_HWCTRL 0 +#define OMAP4430_MODULEMODE_SWCTRL 1 /* Clock management domain register get/set */ diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h new file mode 100644 index 000000000000..c575b9b0c041 --- /dev/null +++ b/arch/arm/mach-omap2/cm44xx.h @@ -0,0 +1,358 @@ +/* + * OMAP44xx CM1 & CM2 instance offset macros + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CM44XX_H +#define __ARCH_ARM_MACH_OMAP2_CM44XX_H + + +/* CM1 */ + + +/* CM1.OCP_SOCKET_CM1 register offsets */ +#define OMAP4430_REVISION_CM1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000) +#define OMAP4430_CM_CM1_PROFILING_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040) + +/* CM1.CKGEN_CM1 register offsets */ +#define OMAP4430_CM_CLKSEL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000) +#define OMAP4430_CM_CLKSEL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008) +#define OMAP4430_CM_DLL_CTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010) +#define OMAP4430_CM_CLKMODE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020) +#define OMAP4430_CM_IDLEST_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024) +#define OMAP4430_CM_AUTOIDLE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028) +#define OMAP4430_CM_CLKSEL_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c) +#define OMAP4430_CM_DIV_M2_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030) +#define OMAP4430_CM_DIV_M3_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034) +#define OMAP4430_CM_DIV_M4_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038) +#define OMAP4430_CM_DIV_M5_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c) +#define OMAP4430_CM_DIV_M6_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040) +#define OMAP4430_CM_DIV_M7_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c) +#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050) +#define OMAP4430_CM_CLKMODE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060) +#define OMAP4430_CM_IDLEST_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064) +#define OMAP4430_CM_AUTOIDLE_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068) +#define OMAP4430_CM_CLKSEL_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c) +#define OMAP4430_CM_DIV_M2_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c) +#define OMAP4430_CM_BYPCLK_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c) +#define OMAP4430_CM_CLKMODE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0) +#define OMAP4430_CM_IDLEST_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4) +#define OMAP4430_CM_AUTOIDLE_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8) +#define OMAP4430_CM_CLKSEL_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac) +#define OMAP4430_CM_DIV_M4_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8) +#define OMAP4430_CM_DIV_M5_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc) +#define OMAP4430_CM_BYPCLK_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc) +#define OMAP4430_CM_CLKMODE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0) +#define OMAP4430_CM_IDLEST_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4) +#define OMAP4430_CM_AUTOIDLE_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8) +#define OMAP4430_CM_CLKSEL_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec) +#define OMAP4430_CM_DIV_M2_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0) +#define OMAP4430_CM_DIV_M3_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c) +#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120) +#define OMAP4430_CM_IDLEST_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124) +#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128) +#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c) +#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130) +#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138) +#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c) +#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c) +#define OMAP4430_CM_SHADOW_FREQ_CONFIG1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160) +#define OMAP4430_CM_SHADOW_FREQ_CONFIG2 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164) +#define OMAP4430_CM_DYN_DEP_PRESCAL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170) +#define OMAP4430_CM_RESTORE_ST OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180) + +/* CM1.MPU_CM1 register offsets */ +#define OMAP4430_CM_MPU_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000) +#define OMAP4430_CM_MPU_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004) +#define OMAP4430_CM_MPU_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008) +#define OMAP4430_CM_MPU_MPU_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020) + +/* CM1.TESLA_CM1 register offsets */ +#define OMAP4430_CM_TESLA_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000) +#define OMAP4430_CM_TESLA_STATICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004) +#define OMAP4430_CM_TESLA_DYNAMICDEP OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008) +#define OMAP4430_CM_TESLA_TESLA_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020) + +/* CM1.ABE_CM1 register offsets */ +#define OMAP4430_CM1_ABE_CLKSTCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000) +#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020) +#define OMAP4430_CM1_ABE_AESS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028) +#define OMAP4430_CM1_ABE_PDM_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030) +#define OMAP4430_CM1_ABE_DMIC_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038) +#define OMAP4430_CM1_ABE_MCASP_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040) +#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048) +#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050) +#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058) +#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060) +#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068) +#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070) +#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078) +#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080) +#define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088) + +/* CM1.RESTORE_CM1 register offsets */ +#define OMAP4430_CM_CLKSEL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000) +#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004) +#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008) +#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c) +#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010) +#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014) +#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018) +#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024) +#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028) +#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c) +#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030) +#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034) + +/* CM2 */ + + +/* CM2.OCP_SOCKET_CM2 register offsets */ +#define OMAP4430_REVISION_CM2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000) +#define OMAP4430_CM_CM2_PROFILING_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040) + +/* CM2.CKGEN_CM2 register offsets */ +#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000) +#define OMAP4430_CM_CLKSEL_USB_60MHZ OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004) +#define OMAP4430_CM_SCALE_FCLK OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008) +#define OMAP4430_CM_CORE_DVFS_PERF1 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010) +#define OMAP4430_CM_CORE_DVFS_PERF2 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014) +#define OMAP4430_CM_CORE_DVFS_PERF3 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018) +#define OMAP4430_CM_CORE_DVFS_PERF4 OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c) +#define OMAP4430_CM_CORE_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024) +#define OMAP4430_CM_IVA_DVFS_PERF_TESLA OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028) +#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c) +#define OMAP4430_CM_IVA_DVFS_PERF_ABE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030) +#define OMAP4430_CM_IVA_DVFS_CURRENT OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038) +#define OMAP4430_CM_CLKMODE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040) +#define OMAP4430_CM_IDLEST_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044) +#define OMAP4430_CM_AUTOIDLE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048) +#define OMAP4430_CM_CLKSEL_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c) +#define OMAP4430_CM_DIV_M2_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050) +#define OMAP4430_CM_DIV_M3_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054) +#define OMAP4430_CM_DIV_M4_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058) +#define OMAP4430_CM_DIV_M5_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c) +#define OMAP4430_CM_DIV_M6_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060) +#define OMAP4430_CM_DIV_M7_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c) +#define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070) +#define OMAP4430_CM_CLKMODE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080) +#define OMAP4430_CM_IDLEST_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084) +#define OMAP4430_CM_AUTOIDLE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088) +#define OMAP4430_CM_CLKSEL_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c) +#define OMAP4430_CM_DIV_M2_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac) +#define OMAP4430_CM_CLKDCOLDO_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4) +#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0) +#define OMAP4430_CM_IDLEST_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4) +#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8) +#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc) +#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0) +#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8) +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec) + +/* CM2.ALWAYS_ON_CM2 register offsets */ +#define OMAP4430_CM_ALWON_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000) +#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020) +#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028) +#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030) +#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038) + +/* CM2.CORE_CM2 register offsets */ +#define OMAP4430_CM_L3_1_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000) +#define OMAP4430_CM_L3_1_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008) +#define OMAP4430_CM_L3_1_L3_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020) +#define OMAP4430_CM_L3_2_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100) +#define OMAP4430_CM_L3_2_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108) +#define OMAP4430_CM_L3_2_L3_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120) +#define OMAP4430_CM_L3_2_GPMC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128) +#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130) +#define OMAP4430_CM_DUCATI_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200) +#define OMAP4430_CM_DUCATI_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204) +#define OMAP4430_CM_DUCATI_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208) +#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220) +#define OMAP4430_CM_SDMA_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300) +#define OMAP4430_CM_SDMA_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304) +#define OMAP4430_CM_SDMA_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308) +#define OMAP4430_CM_SDMA_SDMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320) +#define OMAP4430_CM_MEMIF_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400) +#define OMAP4430_CM_MEMIF_DMM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420) +#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428) +#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430) +#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438) +#define OMAP4430_CM_MEMIF_DLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440) +#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450) +#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458) +#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460) +#define OMAP4430_CM_D2D_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500) +#define OMAP4430_CM_D2D_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504) +#define OMAP4430_CM_D2D_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508) +#define OMAP4430_CM_D2D_SAD2D_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520) +#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528) +#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530) +#define OMAP4430_CM_L4CFG_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600) +#define OMAP4430_CM_L4CFG_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608) +#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620) +#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628) +#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630) +#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638) +#define OMAP4430_CM_L3INSTR_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700) +#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720) +#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728) +#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740) + +/* CM2.IVAHD_CM2 register offsets */ +#define OMAP4430_CM_IVAHD_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000) +#define OMAP4430_CM_IVAHD_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004) +#define OMAP4430_CM_IVAHD_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008) +#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020) +#define OMAP4430_CM_IVAHD_SL2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028) + +/* CM2.CAM_CM2 register offsets */ +#define OMAP4430_CM_CAM_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000) +#define OMAP4430_CM_CAM_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004) +#define OMAP4430_CM_CAM_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008) +#define OMAP4430_CM_CAM_ISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020) +#define OMAP4430_CM_CAM_FDIF_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028) + +/* CM2.DSS_CM2 register offsets */ +#define OMAP4430_CM_DSS_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000) +#define OMAP4430_CM_DSS_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004) +#define OMAP4430_CM_DSS_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008) +#define OMAP4430_CM_DSS_DSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020) +#define OMAP4430_CM_DSS_DEISS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028) + +/* CM2.GFX_CM2 register offsets */ +#define OMAP4430_CM_GFX_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000) +#define OMAP4430_CM_GFX_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004) +#define OMAP4430_CM_GFX_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008) +#define OMAP4430_CM_GFX_GFX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020) + +/* CM2.L3INIT_CM2 register offsets */ +#define OMAP4430_CM_L3INIT_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000) +#define OMAP4430_CM_L3INIT_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004) +#define OMAP4430_CM_L3INIT_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008) +#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028) +#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030) +#define OMAP4430_CM_L3INIT_HSI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038) +#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040) +#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058) +#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060) +#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068) +#define OMAP4430_CM_L3INIT_P1500_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078) +#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080) +#define OMAP4430_CM_L3INIT_SATA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088) +#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090) +#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098) +#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8) +#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0) +#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8) +#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0) +#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0) + +/* CM2.L4PER_CM2 register offsets */ +#define OMAP4430_CM_L4PER_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000) +#define OMAP4430_CM_L4PER_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008) +#define OMAP4430_CM_L4PER_ADC_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020) +#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028) +#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030) +#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038) +#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040) +#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048) +#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050) +#define OMAP4430_CM_L4PER_ELM_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058) +#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060) +#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068) +#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070) +#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078) +#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080) +#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088) +#define OMAP4430_CM_L4PER_HECC1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090) +#define OMAP4430_CM_L4PER_HECC2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098) +#define OMAP4430_CM_L4PER_I2C1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0) +#define OMAP4430_CM_L4PER_I2C2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8) +#define OMAP4430_CM_L4PER_I2C3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0) +#define OMAP4430_CM_L4PER_I2C4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8) +#define OMAP4430_CM_L4PER_L4PER_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0) +#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0) +#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8) +#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0) +#define OMAP4430_CM_L4PER_MGATE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8) +#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0) +#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8) +#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100) +#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108) +#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120) +#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128) +#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130) +#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138) +#define OMAP4430_CM_L4PER_UART1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140) +#define OMAP4430_CM_L4PER_UART2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148) +#define OMAP4430_CM_L4PER_UART3_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150) +#define OMAP4430_CM_L4PER_UART4_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158) +#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160) +#define OMAP4430_CM_L4PER_I2C5_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168) +#define OMAP4430_CM_L4SEC_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180) +#define OMAP4430_CM_L4SEC_STATICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184) +#define OMAP4430_CM_L4SEC_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188) +#define OMAP4430_CM_L4SEC_AES1_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0) +#define OMAP4430_CM_L4SEC_AES2_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8) +#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0) +#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8) +#define OMAP4430_CM_L4SEC_RNG_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0) +#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8) +#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8) + +/* CM2.CEFUSE_CM2 register offsets */ +#define OMAP4430_CM_CEFUSE_CLKSTCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000) +#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020) + +/* CM2.RESTORE_CM2 register offsets */ +#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000) +#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004) +#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008) +#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c) +#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010) +#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014) +#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018) +#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c) +#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020) +#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024) +#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028) +#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c) +#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030) +#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034) +#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038) +#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c) +#define OMAP4430_CM_SDMA_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040) +#endif diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 733d3dcff98b..18ad93160abb 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -27,6 +27,8 @@ #include <mach/gpio.h> #include <plat/mmc.h> +#include "mux.h" + #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE) static struct resource cam_resources[] = { @@ -595,27 +597,40 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, if (cpu_is_omap34xx()) { if (controller_nr == 0) { - omap_cfg_reg(N28_3430_MMC1_CLK); - omap_cfg_reg(M27_3430_MMC1_CMD); - omap_cfg_reg(N27_3430_MMC1_DAT0); + omap_mux_init_signal("sdmmc1_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat0", + OMAP_PIN_INPUT_PULLUP); if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(N26_3430_MMC1_DAT1); - omap_cfg_reg(N25_3430_MMC1_DAT2); - omap_cfg_reg(P28_3430_MMC1_DAT3); + omap_mux_init_signal("sdmmc1_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(P27_3430_MMC1_DAT4); - omap_cfg_reg(P26_3430_MMC1_DAT5); - omap_cfg_reg(R27_3430_MMC1_DAT6); - omap_cfg_reg(R25_3430_MMC1_DAT7); + omap_mux_init_signal("sdmmc1_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc1_dat7", + OMAP_PIN_INPUT_PULLUP); } } if (controller_nr == 1) { /* MMC2 */ - omap_cfg_reg(AE2_3430_MMC2_CLK); - omap_cfg_reg(AG5_3430_MMC2_CMD); - omap_cfg_reg(AH5_3430_MMC2_DAT0); + omap_mux_init_signal("sdmmc2_clk", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_cmd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat0", + OMAP_PIN_INPUT_PULLUP); /* * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed @@ -623,15 +638,22 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller, */ if (mmc_controller->slots[0].wires == 4 || mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AH4_3430_MMC2_DAT1); - omap_cfg_reg(AG4_3430_MMC2_DAT2); - omap_cfg_reg(AF4_3430_MMC2_DAT3); + omap_mux_init_signal("sdmmc2_dat1", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat2", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat3", + OMAP_PIN_INPUT_PULLUP); } if (mmc_controller->slots[0].wires == 8) { - omap_cfg_reg(AE4_3430_MMC2_DAT4); - omap_cfg_reg(AH3_3430_MMC2_DAT5); - omap_cfg_reg(AF3_3430_MMC2_DAT6); - omap_cfg_reg(AE3_3430_MMC2_DAT7); + omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7", + OMAP_PIN_INPUT_PULLUP); } } diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c new file mode 100644 index 000000000000..f6055b493294 --- /dev/null +++ b/arch/arm/mach-omap2/dpll.c @@ -0,0 +1,538 @@ +/* + * OMAP3/4 - specific DPLL control functions + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Written by Paul Walmsley + * Testing and integration fixes by Jouni Högander + * + * Parts of this code are based on code written by + * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/limits.h> +#include <linux/bitops.h> + +#include <plat/cpu.h> +#include <plat/clock.h> +#include <plat/sram.h> +#include <asm/div64.h> +#include <asm/clkdev.h> + +#include "clock.h" +#include "prm.h" +#include "prm-regbits-34xx.h" +#include "cm.h" +#include "cm-regbits-34xx.h" + +/* CM_AUTOIDLE_PLL*.AUTO_* bit values */ +#define DPLL_AUTOIDLE_DISABLE 0x0 +#define DPLL_AUTOIDLE_LOW_POWER_STOP 0x1 + +#define MAX_DPLL_WAIT_TRIES 1000000 + + +/** + * omap3_dpll_recalc - recalculate DPLL rate + * @clk: DPLL struct clk + * + * Recalculate and propagate the DPLL rate. + */ +unsigned long omap3_dpll_recalc(struct clk *clk) +{ + return omap2_get_dpll_rate(clk); +} + +/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */ +static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits) +{ + const struct dpll_data *dd; + u32 v; + + dd = clk->dpll_data; + + v = __raw_readl(dd->control_reg); + v &= ~dd->enable_mask; + v |= clken_bits << __ffs(dd->enable_mask); + __raw_writel(v, dd->control_reg); +} + +/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */ +static int _omap3_wait_dpll_status(struct clk *clk, u8 state) +{ + const struct dpll_data *dd; + int i = 0; + int ret = -EINVAL; + + dd = clk->dpll_data; + + state <<= __ffs(dd->idlest_mask); + + while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) && + i < MAX_DPLL_WAIT_TRIES) { + i++; + udelay(1); + } + + if (i == MAX_DPLL_WAIT_TRIES) { + printk(KERN_ERR "clock: %s failed transition to '%s'\n", + clk->name, (state) ? "locked" : "bypassed"); + } else { + pr_debug("clock: %s transition to '%s' in %d loops\n", + clk->name, (state) ? "locked" : "bypassed", i); + + ret = 0; + } + + return ret; +} + +/* From 3430 TRM ES2 4.7.6.2 */ +static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) +{ + unsigned long fint; + u16 f = 0; + + fint = clk->dpll_data->clk_ref->rate / n; + + pr_debug("clock: fint is %lu\n", fint); + + if (fint >= 750000 && fint <= 1000000) + f = 0x3; + else if (fint > 1000000 && fint <= 1250000) + f = 0x4; + else if (fint > 1250000 && fint <= 1500000) + f = 0x5; + else if (fint > 1500000 && fint <= 1750000) + f = 0x6; + else if (fint > 1750000 && fint <= 2100000) + f = 0x7; + else if (fint > 7500000 && fint <= 10000000) + f = 0xB; + else if (fint > 10000000 && fint <= 12500000) + f = 0xC; + else if (fint > 12500000 && fint <= 15000000) + f = 0xD; + else if (fint > 15000000 && fint <= 17500000) + f = 0xE; + else if (fint > 17500000 && fint <= 21000000) + f = 0xF; + else + pr_debug("clock: unknown freqsel setting for %d\n", n); + + return f; +} + +/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ + +/* + * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to lock. Waits for the DPLL to report + * readiness before returning. Will save and restore the DPLL's + * autoidle state across the enable, per the CDP code. If the DPLL + * locked successfully, return 0; if the DPLL did not lock in the time + * allotted, or DPLL3 was passed in, return -EINVAL. + */ +static int _omap3_noncore_dpll_lock(struct clk *clk) +{ + u8 ai; + int r; + + pr_debug("clock: locking DPLL %s\n", clk->name); + + ai = omap3_dpll_autoidle_read(clk); + + omap3_dpll_deny_idle(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOCKED); + + r = _omap3_wait_dpll_status(clk, 1); + + if (ai) + omap3_dpll_allow_idle(clk); + + return r; +} + +/* + * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power bypass mode. In + * bypass mode, the DPLL's rate is set equal to its parent clock's + * rate. Waits for the DPLL to report readiness before returning. + * Will save and restore the DPLL's autoidle state across the enable, + * per the CDP code. If the DPLL entered bypass mode successfully, + * return 0; if the DPLL did not enter bypass in the time allotted, or + * DPLL3 was passed in, or the DPLL does not support low-power bypass, + * return -EINVAL. + */ +static int _omap3_noncore_dpll_bypass(struct clk *clk) +{ + int r; + u8 ai; + + if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) + return -EINVAL; + + pr_debug("clock: configuring DPLL %s for low-power bypass\n", + clk->name); + + ai = omap3_dpll_autoidle_read(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS); + + r = _omap3_wait_dpll_status(clk, 0); + + if (ai) + omap3_dpll_allow_idle(clk); + else + omap3_dpll_deny_idle(clk); + + return r; +} + +/* + * _omap3_noncore_dpll_stop - instruct a DPLL to stop + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power stop. Will save and + * restore the DPLL's autoidle state across the stop, per the CDP + * code. If DPLL3 was passed in, or the DPLL does not support + * low-power stop, return -EINVAL; otherwise, return 0. + */ +static int _omap3_noncore_dpll_stop(struct clk *clk) +{ + u8 ai; + + if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP))) + return -EINVAL; + + pr_debug("clock: stopping DPLL %s\n", clk->name); + + ai = omap3_dpll_autoidle_read(clk); + + _omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP); + + if (ai) + omap3_dpll_allow_idle(clk); + else + omap3_dpll_deny_idle(clk); + + return 0; +} + +/** + * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock. + * The choice of modes depends on the DPLL's programmed rate: if it is + * the same as the DPLL's parent clock, it will enter bypass; + * otherwise, it will enter lock. This code will wait for the DPLL to + * indicate readiness before returning, unless the DPLL takes too long + * to enter the target state. Intended to be used as the struct clk's + * enable function. If DPLL3 was passed in, or the DPLL does not + * support low-power stop, or if the DPLL took too long to enter + * bypass or lock, return -EINVAL; otherwise, return 0. + */ +int omap3_noncore_dpll_enable(struct clk *clk) +{ + int r; + struct dpll_data *dd; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (clk->rate == dd->clk_bypass->rate) { + WARN_ON(clk->parent != dd->clk_bypass); + r = _omap3_noncore_dpll_bypass(clk); + } else { + WARN_ON(clk->parent != dd->clk_ref); + r = _omap3_noncore_dpll_lock(clk); + } + /* + *FIXME: this is dubious - if clk->rate has changed, what about + * propagating? + */ + if (!r) + clk->rate = omap2_get_dpll_rate(clk); + + return r; +} + +/** + * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop + * @clk: pointer to a DPLL struct clk + * + * Instructs a non-CORE DPLL to enter low-power stop. This function is + * intended for use in struct clkops. No return value. + */ +void omap3_noncore_dpll_disable(struct clk *clk) +{ + _omap3_noncore_dpll_stop(clk); +} + + +/* Non-CORE DPLL rate set code */ + +/* + * omap3_noncore_dpll_program - set non-core DPLL M,N values directly + * @clk: struct clk * of DPLL to set + * @m: DPLL multiplier to set + * @n: DPLL divider to set + * @freqsel: FREQSEL value to set + * + * Program the DPLL with the supplied M, N values, and wait for the DPLL to + * lock.. Returns -EINVAL upon error, or 0 upon success. + */ +int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) +{ + struct dpll_data *dd = clk->dpll_data; + u32 v; + + /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ + _omap3_noncore_dpll_bypass(clk); + + /* Set jitter correction */ + if (!cpu_is_omap44xx()) { + v = __raw_readl(dd->control_reg); + v &= ~dd->freqsel_mask; + v |= freqsel << __ffs(dd->freqsel_mask); + __raw_writel(v, dd->control_reg); + } + + /* Set DPLL multiplier, divider */ + v = __raw_readl(dd->mult_div1_reg); + v &= ~(dd->mult_mask | dd->div1_mask); + v |= m << __ffs(dd->mult_mask); + v |= (n - 1) << __ffs(dd->div1_mask); + __raw_writel(v, dd->mult_div1_reg); + + /* We let the clock framework set the other output dividers later */ + + /* REVISIT: Set ramp-up delay? */ + + _omap3_noncore_dpll_lock(clk); + + return 0; +} + +/** + * omap3_noncore_dpll_set_rate - set non-core DPLL rate + * @clk: struct clk * of DPLL to set + * @rate: rounded target rate + * + * Set the DPLL CLKOUT to the target rate. If the DPLL can enter + * low-power bypass, and the target rate is the bypass source clock + * rate, then configure the DPLL for bypass. Otherwise, round the + * target rate if it hasn't been done already, then program and lock + * the DPLL. Returns -EINVAL upon error, or 0 upon success. + */ +int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *new_parent = NULL; + u16 freqsel = 0; + struct dpll_data *dd; + int ret; + + if (!clk || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (rate == omap2_get_dpll_rate(clk)) + return 0; + + /* + * Ensure both the bypass and ref clocks are enabled prior to + * doing anything; we need the bypass clock running to reprogram + * the DPLL. + */ + omap2_clk_enable(dd->clk_bypass); + omap2_clk_enable(dd->clk_ref); + + if (dd->clk_bypass->rate == rate && + (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) { + pr_debug("clock: %s: set rate: entering bypass.\n", clk->name); + + ret = _omap3_noncore_dpll_bypass(clk); + if (!ret) + new_parent = dd->clk_bypass; + } else { + if (dd->last_rounded_rate != rate) + omap2_dpll_round_rate(clk, rate); + + if (dd->last_rounded_rate == 0) + return -EINVAL; + + /* No freqsel on OMAP4 */ + if (!cpu_is_omap44xx()) { + freqsel = _omap3_dpll_compute_freqsel(clk, + dd->last_rounded_n); + if (!freqsel) + WARN_ON(1); + } + + pr_debug("clock: %s: set rate: locking rate to %lu.\n", + clk->name, rate); + + ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m, + dd->last_rounded_n, freqsel); + if (!ret) + new_parent = dd->clk_ref; + } + if (!ret) { + /* + * Switch the parent clock in the heirarchy, and make sure + * that the new parent's usecount is correct. Note: we + * enable the new parent before disabling the old to avoid + * any unnecessary hardware disable->enable transitions. + */ + if (clk->usecount) { + omap2_clk_enable(new_parent); + omap2_clk_disable(clk->parent); + } + clk_reparent(clk, new_parent); + clk->rate = rate; + } + omap2_clk_disable(dd->clk_ref); + omap2_clk_disable(dd->clk_bypass); + + return 0; +} + +/* DPLL autoidle read/set code */ + +/** + * omap3_dpll_autoidle_read - read a DPLL's autoidle bits + * @clk: struct clk * of the DPLL to read + * + * Return the DPLL's autoidle bits, shifted down to bit 0. Returns + * -EINVAL if passed a null pointer or if the struct clk does not + * appear to refer to a DPLL. + */ +u32 omap3_dpll_autoidle_read(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return -EINVAL; + + dd = clk->dpll_data; + + v = __raw_readl(dd->autoidle_reg); + v &= dd->autoidle_mask; + v >>= __ffs(dd->autoidle_mask); + + return v; +} + +/** + * omap3_dpll_allow_idle - enable DPLL autoidle bits + * @clk: struct clk * of the DPLL to operate on + * + * Enable DPLL automatic idle control. This automatic idle mode + * switching takes effect only when the DPLL is locked, at least on + * OMAP3430. The DPLL will enter low-power stop when its downstream + * clocks are gated. No return value. + */ +void omap3_dpll_allow_idle(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return; + + dd = clk->dpll_data; + + /* + * REVISIT: CORE DPLL can optionally enter low-power bypass + * by writing 0x5 instead of 0x1. Add some mechanism to + * optionally enter this mode. + */ + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); +} + +/** + * omap3_dpll_deny_idle - prevent DPLL from automatically idling + * @clk: struct clk * of the DPLL to operate on + * + * Disable DPLL automatic idle control. No return value. + */ +void omap3_dpll_deny_idle(struct clk *clk) +{ + const struct dpll_data *dd; + u32 v; + + if (!clk || !clk->dpll_data) + return; + + dd = clk->dpll_data; + + v = __raw_readl(dd->autoidle_reg); + v &= ~dd->autoidle_mask; + v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask); + __raw_writel(v, dd->autoidle_reg); + +} + +/* Clock control for DPLL outputs */ + +/** + * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate + * @clk: DPLL output struct clk + * + * Using parent clock DPLL data, look up DPLL state. If locked, set our + * rate to the dpll_clk * 2; otherwise, just use dpll_clk. + */ +unsigned long omap3_clkoutx2_recalc(struct clk *clk) +{ + const struct dpll_data *dd; + unsigned long rate; + u32 v; + struct clk *pclk; + + /* Walk up the parents of clk, looking for a DPLL */ + pclk = clk->parent; + while (pclk && !pclk->dpll_data) + pclk = pclk->parent; + + /* clk does not have a DPLL as a parent? */ + WARN_ON(!pclk); + + dd = pclk->dpll_data; + + WARN_ON(!dd->enable_mask); + + v = __raw_readl(dd->control_reg) & dd->enable_mask; + v >>= __ffs(dd->enable_mask); + if (v != OMAP3XXX_EN_DPLL_LOCKED) + rate = clk->parent->rate; + else + rate = clk->parent->rate * 2; + return rate; +} diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 6083e21b3be6..877c6f5807b7 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -33,17 +33,19 @@ static struct resource gpmc_smc91x_resources[] = { }; static struct smc91x_platdata gpmc_smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, }; static struct platform_device gpmc_smc91x_device = { .name = "smc91x", .id = -1, - .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), - .resource = gpmc_smc91x_resources, .dev = { .platform_data = &gpmc_smc91x_info, }, + .num_resources = ARRAY_SIZE(gpmc_smc91x_resources), + .resource = gpmc_smc91x_resources, }; /* diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e86f5ca180ea..bd8cb5974726 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -517,7 +517,7 @@ void __init gpmc_init(void) ck = "gpmc_fck"; l = OMAP34XX_GPMC_BASE; } else if (cpu_is_omap44xx()) { - ck = "gpmc_fck"; + ck = "gpmc_ck"; l = OMAP44XX_GPMC_BASE; } diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c new file mode 100644 index 000000000000..789ca8c02f0c --- /dev/null +++ b/arch/arm/mach-omap2/i2c.c @@ -0,0 +1,56 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <plat/cpu.h> +#include <plat/i2c.h> +#include <plat/mux.h> + +#include "mux.h" + +int __init omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + if (cpu_is_omap24xx()) { + const int omap24xx_pins[][2] = { + { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, + { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, + }; + int scl, sda; + + scl = omap24xx_pins[bus_id - 1][0]; + sda = omap24xx_pins[bus_id - 1][1]; + omap_cfg_reg(sda); + omap_cfg_reg(scl); + } + + /* First I2C bus is not muxable */ + if (cpu_is_omap34xx() && bus_id > 1) { + char mux_name[sizeof("i2c2_scl.i2c2_scl")]; + + sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); + omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); + } + + return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); +} diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index f48a4b2654dd..a091b53657b9 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -246,6 +246,31 @@ void __init omap3_check_revision(void) } } +void __init omap4_check_revision(void) +{ + u32 idcode; + u16 hawkeye; + u8 rev; + char *rev_name = "ES1.0"; + + /* + * The IC rev detection is done with hawkeye and rev. + * Note that rev does not map directly to defined processor + * revision numbers as ES1.0 uses value 0. + */ + idcode = read_tap_reg(OMAP_TAP_IDCODE); + hawkeye = (idcode >> 12) & 0xffff; + rev = (idcode >> 28) & 0xff; + + if ((hawkeye == 0xb852) && (rev == 0x0)) { + omap_revision = OMAP4430_REV_ES1_0; + pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name); + return; + } + + pr_err("Unknown OMAP4 CPU id\n"); +} + #define OMAP3_SHOW_FEATURE(feat) \ if (omap3_has_ ##feat()) \ printk(#feat" "); @@ -277,10 +302,10 @@ void __init omap3_cpuinfo(void) } else if (omap3_has_iva() && omap3_has_sgx()) { /* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */ strcpy(cpu_name, "OMAP3430/3530"); - } else if (omap3_has_sgx()) { + } else if (omap3_has_iva()) { omap_revision = OMAP3525_REV(rev); strcpy(cpu_name, "OMAP3525"); - } else if (omap3_has_iva()) { + } else if (omap3_has_sgx()) { omap_revision = OMAP3515_REV(rev); strcpy(cpu_name, "OMAP3515"); } else { @@ -336,7 +361,7 @@ void __init omap2_check_revision(void) omap3_check_features(); omap3_cpuinfo(); } else if (cpu_is_omap44xx()) { - printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n"); + omap4_check_revision(); return; } else { pr_err("OMAP revision unknown, please fix!\n"); diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 6a4d8e468703..a8749e8017b9 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -33,9 +33,9 @@ #include <plat/sdrc.h> #include <plat/gpmc.h> #include <plat/serial.h> +#include <plat/mux.h> #include <plat/vram.h> -#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */ #include "clock.h" #include <plat/omap-pm.h> @@ -44,7 +44,6 @@ #include <plat/clockdomain.h> #include "clockdomains.h" -#endif #include <plat/omap_hwmod.h> #include "omap_hwmod_2420.h" #include "omap_hwmod_2430.h" @@ -321,8 +320,8 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0, omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps); pwrdm_init(powerdomains_omap); clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps); - omap2_clk_init(); #endif + omap2_clk_init(); omap_serial_early_init(); #ifndef CONFIG_ARCH_OMAP4 omap_hwmod_late_init(); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c18a94eca641..e071b3fd1878 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -27,19 +27,52 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/ctype.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> #include <asm/system.h> #include <plat/control.h> #include <plat/mux.h> -#ifdef CONFIG_OMAP_MUX +#include "mux.h" + +#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ +#define OMAP_MUX_BASE_SZ 0x5ca + +struct omap_mux_entry { + struct omap_mux mux; + struct list_head node; +}; + +static unsigned long mux_phys; +static void __iomem *mux_base; + +static inline u16 omap_mux_read(u16 reg) +{ + if (cpu_is_omap24xx()) + return __raw_readb(mux_base + reg); + else + return __raw_readw(mux_base + reg); +} + +static inline void omap_mux_write(u16 val, u16 reg) +{ + if (cpu_is_omap24xx()) + __raw_writeb(val, mux_base + reg); + else + __raw_writew(val, mux_base + reg); +} + +#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX) static struct omap_mux_cfg arch_mux_cfg; /* NOTE: See mux.h for the enumeration */ -#ifdef CONFIG_ARCH_OMAP24XX static struct pin_config __initdata_or_module omap24xx_pins[] = { /* * description mux mux pull pull debug @@ -249,342 +282,14 @@ MUX_CFG_24XX("AF19_2430_GPIO_85", 0x0113, 3, 0, 0, 1) #define OMAP24XX_PINS_SZ ARRAY_SIZE(omap24xx_pins) -#else -#define omap24xx_pins NULL -#define OMAP24XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP24XX */ - -#ifdef CONFIG_ARCH_OMAP34XX -static struct pin_config __initdata_or_module omap34xx_pins[] = { -/* - * Name, reg-offset, - * mux-mode | [active-mode | off-mode] - */ - -/* 34xx I2C */ -MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 1*/ -MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 2*/ -MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* TLL - HSUSB: 12-pin TLL Port 3*/ -MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) - -/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ -MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de, - OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT) - -/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ -MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a, - OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT) - - -/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix. - * (Always specify PIN_INPUT, except for names suffixed by "_OUT".) - * No internal pullup/pulldown without "_UP" or "_DOWN" suffix. - */ -MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN) -MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) -MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT) - -/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ -MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) -MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT) - -/* MMC1 */ -MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC2 */ -MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE4_3430_MMC2_DAT4", 0x164, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH3_3430_MMC2_DAT5", 0x166, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF3_3430_MMC2_DAT6", 0x168, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE3_3430_MMC2_DAT7", 0x16A, - OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP) - -/* MMC3 */ -MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0, - OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2, - OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP) - -/* SYS_NIRQ T2 INT1 */ -MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0, - OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP | - OMAP34XX_MUX_MODE0) -/* EHCI GPIO's on OMAP3EVM (Rev >= E) */ -MUX_CFG_34XX("AH14_34XX_GPIO21", 0x5ea, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("AF9_34XX_GPIO22", 0x5ec, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -MUX_CFG_34XX("U3_34XX_GPIO61", 0x0c8, - OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP) -}; - -#define OMAP34XX_PINS_SZ ARRAY_SIZE(omap34xx_pins) - -#else -#define omap34xx_pins NULL -#define OMAP34XX_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP34XX */ - #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS) + static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg) { u16 orig; u8 warn = 0, debug = 0; - if (cpu_is_omap24xx()) - orig = omap_ctrl_readb(cfg->mux_reg); - else - orig = omap_ctrl_readw(cfg->mux_reg); + orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET); #ifdef CONFIG_OMAP_MUX_DEBUG debug = cfg->debug; @@ -600,7 +305,6 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r #define omap2_cfg_debug(x, y) do {} while (0) #endif -#ifdef CONFIG_ARCH_OMAP24XX static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) { static DEFINE_SPINLOCK(mux_spin_lock); @@ -614,47 +318,692 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg) if (cfg->pu_pd_val) reg |= OMAP2_PULL_UP; omap2_cfg_debug(cfg, reg); - omap_ctrl_writeb(reg, cfg->mux_reg); + omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET); spin_unlock_irqrestore(&mux_spin_lock, flags); return 0; } + +int __init omap2_mux_init(void) +{ + u32 mux_pbase; + + if (cpu_is_omap2420()) + mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else if (cpu_is_omap2430()) + mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET; + else + return -ENODEV; + + mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + + if (cpu_is_omap24xx()) { + arch_mux_cfg.pins = omap24xx_pins; + arch_mux_cfg.size = OMAP24XX_PINS_SZ; + arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; + + return omap_mux_register(&arch_mux_cfg); + } + + return 0; +} + #else -#define omap24xx_cfg_reg NULL -#endif +int __init omap2_mux_init(void) +{ + return 0; +} +#endif /* CONFIG_OMAP_MUX */ + +/*----------------------------------------------------------------------------*/ #ifdef CONFIG_ARCH_OMAP34XX -static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg) +static LIST_HEAD(muxmodes); +static DEFINE_MUTEX(muxmode_mutex); + +#ifdef CONFIG_OMAP_MUX + +static char *omap_mux_options; + +int __init omap_mux_init_gpio(int gpio, int val) { - static DEFINE_SPINLOCK(mux_spin_lock); - unsigned long flags; - u16 reg = 0; + struct omap_mux_entry *e; + int found = 0; + + if (!gpio) + return -EINVAL; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (gpio == m->gpio) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); + mux_mode |= OMAP_MUX_MODE4; + printk(KERN_DEBUG "mux: Setting signal " + "%s.gpio%i 0x%04x -> 0x%04x\n", + m->muxnames[0], gpio, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } - spin_lock_irqsave(&mux_spin_lock, flags); - reg |= cfg->mux_val; - omap2_cfg_debug(cfg, reg); - omap_ctrl_writew(reg, cfg->mux_reg); - spin_unlock_irqrestore(&mux_spin_lock, flags); + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + + return -ENODEV; +} + +int __init omap_mux_init_signal(char *muxname, int val) +{ + struct omap_mux_entry *e; + char *m0_name = NULL, *mode_name = NULL; + int found = 0; + + mode_name = strchr(muxname, '.'); + if (mode_name) { + *mode_name = '\0'; + mode_name++; + m0_name = muxname; + } else { + mode_name = muxname; + } + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char *m0_entry = m->muxnames[0]; + int i; + + if (m0_name && strcmp(m0_name, m0_entry)) + continue; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + char *mode_cur = m->muxnames[i]; + + if (!mode_cur) + continue; + + if (!strcmp(mode_name, mode_cur)) { + u16 old_mode; + u16 mux_mode; + + old_mode = omap_mux_read(m->reg_offset); + mux_mode = val | i; + printk(KERN_DEBUG "mux: Setting signal " + "%s.%s 0x%04x -> 0x%04x\n", + m0_entry, muxname, old_mode, mux_mode); + omap_mux_write(mux_mode, m->reg_offset); + found++; + } + } + } + + if (found == 1) + return 0; + + if (found > 1) { + printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n", + found, muxname); + return -EINVAL; + } + + printk(KERN_ERR "mux: Could not set signal %s\n", muxname); + + return -ENODEV; +} + +#ifdef CONFIG_DEBUG_FS + +#define OMAP_MUX_MAX_NR_FLAGS 10 +#define OMAP_MUX_TEST_FLAG(val, mask) \ + if (((val) & (mask)) == (mask)) { \ + i++; \ + flags[i] = #mask; \ + } + +/* REVISIT: Add checking for non-optimal mux settings */ +static inline void omap_mux_decode(struct seq_file *s, u16 val) +{ + char *flags[OMAP_MUX_MAX_NR_FLAGS]; + char mode[14]; + int i = -1; + + sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7); + i++; + flags[i] = mode; + + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE); + if (val & OMAP_OFF_EN) { + if (!(val & OMAP_OFFOUT_EN)) { + if (!(val & OMAP_OFF_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_INPUT_PULLUP); + } + } else { + if (!(val & OMAP_OFFOUT_VAL)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_LOW); + } else { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_OFF_OUTPUT_HIGH); + } + } + } + + if (val & OMAP_INPUT_EN) { + if (val & OMAP_PULL_ENA) { + if (!(val & OMAP_PULL_UP)) { + OMAP_MUX_TEST_FLAG(val, + OMAP_PIN_INPUT_PULLDOWN); + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP); + } + } else { + OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT); + } + } else { + i++; + flags[i] = "OMAP_PIN_OUTPUT"; + } + + do { + seq_printf(s, "%s", flags[i]); + if (i > 0) + seq_printf(s, " | "); + } while (i-- > 0); +} + +#define OMAP_MUX_DEFNAME_LEN 16 + +static int omap_mux_dbg_board_show(struct seq_file *s, void *unused) +{ + struct omap_mux_entry *e; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + char m0_def[OMAP_MUX_DEFNAME_LEN]; + char *m0_name = m->muxnames[0]; + u16 val; + int i, mode; + + if (!m0_name) + continue; + + for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) { + if (m0_name[i] == '\0') { + m0_def[i] = m0_name[i]; + break; + } + m0_def[i] = toupper(m0_name[i]); + } + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "OMAP%i_MUX(%s, ", + cpu_is_omap34xx() ? 3 : 0, m0_def); + omap_mux_decode(s, val); + seq_printf(s, "),\n"); + } + + return 0; +} + +static int omap_mux_dbg_board_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_board_show, &inode->i_private); +} + +static const struct file_operations omap_mux_dbg_board_fops = { + .open = omap_mux_dbg_board_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused) +{ + struct omap_mux *m = s->private; + const char *none = "NA"; + u16 val; + int mode; + + val = omap_mux_read(m->reg_offset); + mode = val & OMAP_MUX_MODE7; + + seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n", + m->muxnames[0], m->muxnames[mode], + mux_phys + m->reg_offset, m->reg_offset, val, + m->balls[0] ? m->balls[0] : none, + m->balls[1] ? m->balls[1] : none); + seq_printf(s, "mode: "); + omap_mux_decode(s, val); + seq_printf(s, "\n"); + seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n", + m->muxnames[0] ? m->muxnames[0] : none, + m->muxnames[1] ? m->muxnames[1] : none, + m->muxnames[2] ? m->muxnames[2] : none, + m->muxnames[3] ? m->muxnames[3] : none, + m->muxnames[4] ? m->muxnames[4] : none, + m->muxnames[5] ? m->muxnames[5] : none, + m->muxnames[6] ? m->muxnames[6] : none, + m->muxnames[7] ? m->muxnames[7] : none); return 0; } + +#define OMAP_MUX_MAX_ARG_CHAR 7 + +static ssize_t omap_mux_dbg_signal_write(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + char buf[OMAP_MUX_MAX_ARG_CHAR]; + struct seq_file *seqf; + struct omap_mux *m; + unsigned long val; + int buf_size, ret; + + if (count > OMAP_MUX_MAX_ARG_CHAR) + return -EINVAL; + + memset(buf, 0, sizeof(buf)); + buf_size = min(count, sizeof(buf) - 1); + + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + + ret = strict_strtoul(buf, 0x10, &val); + if (ret < 0) + return ret; + + if (val > 0xffff) + return -EINVAL; + + seqf = file->private_data; + m = seqf->private; + + omap_mux_write((u16)val, m->reg_offset); + *ppos += count; + + return count; +} + +static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file) +{ + return single_open(file, omap_mux_dbg_signal_show, inode->i_private); +} + +static const struct file_operations omap_mux_dbg_signal_fops = { + .open = omap_mux_dbg_signal_open, + .read = seq_read, + .write = omap_mux_dbg_signal_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *mux_dbg_dir; + +static void __init omap_mux_dbg_init(void) +{ + struct omap_mux_entry *e; + + mux_dbg_dir = debugfs_create_dir("omap_mux", NULL); + if (!mux_dbg_dir) + return; + + (void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir, + NULL, &omap_mux_dbg_board_fops); + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + + (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir, + m, &omap_mux_dbg_signal_fops); + } +} + #else -#define omap34xx_cfg_reg NULL +static inline void omap_mux_dbg_init(void) +{ +} +#endif /* CONFIG_DEBUG_FS */ + +static void __init omap_mux_free_names(struct omap_mux *m) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) + kfree(m->muxnames[i]); + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) + kfree(m->balls[i]); #endif -int __init omap2_mux_init(void) +} + +/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */ +static int __init omap_mux_late_init(void) { - if (cpu_is_omap24xx()) { - arch_mux_cfg.pins = omap24xx_pins; - arch_mux_cfg.size = OMAP24XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap24xx_cfg_reg; - } else if (cpu_is_omap34xx()) { - arch_mux_cfg.pins = omap34xx_pins; - arch_mux_cfg.size = OMAP34XX_PINS_SZ; - arch_mux_cfg.cfg_reg = omap34xx_cfg_reg; + struct omap_mux_entry *e, *tmp; + + list_for_each_entry_safe(e, tmp, &muxmodes, node) { + struct omap_mux *m = &e->mux; + u16 mode = omap_mux_read(m->reg_offset); + + if (OMAP_MODE_GPIO(mode)) + continue; + +#ifndef CONFIG_DEBUG_FS + mutex_lock(&muxmode_mutex); + list_del(&e->node); + mutex_unlock(&muxmode_mutex); + omap_mux_free_names(m); + kfree(m); +#endif + + } + + omap_mux_dbg_init(); + + return 0; +} +late_initcall(omap_mux_late_init); + +static void __init omap_mux_package_fixup(struct omap_mux *p, + struct omap_mux *superset) +{ + while (p->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == p->reg_offset) { + *s = *p; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown entry offset 0x%x\n", + p->reg_offset); + p++; + } +} + +#ifdef CONFIG_DEBUG_FS + +static void __init omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ + while (b->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *s = superset; + int found = 0; + + while (s->reg_offset != OMAP_MUX_TERMINATOR) { + if (s->reg_offset == b->reg_offset) { + s->balls[0] = b->balls[0]; + s->balls[1] = b->balls[1]; + found++; + break; + } + s++; + } + if (!found) + printk(KERN_ERR "mux: Unknown ball offset 0x%x\n", + b->reg_offset); + b++; + } +} + +#else /* CONFIG_DEBUG_FS */ + +static inline void omap_mux_package_init_balls(struct omap_ball *b, + struct omap_mux *superset) +{ +} + +#endif /* CONFIG_DEBUG_FS */ + +static int __init omap_mux_setup(char *options) +{ + if (!options) + return 0; + + omap_mux_options = options; + + return 1; +} +__setup("omap_mux=", omap_mux_setup); + +/* + * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234 + * cmdline options only override the bootloader values. + * During development, please enable CONFIG_DEBUG_FS, and use the + * signal specific entries under debugfs. + */ +static void __init omap_mux_set_cmdline_signals(void) +{ + char *options, *next_opt, *token; + + if (!omap_mux_options) + return; + + options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + if (!options) + return; + + strcpy(options, omap_mux_options); + next_opt = options; + + while ((token = strsep(&next_opt, ",")) != NULL) { + char *keyval, *name; + unsigned long val; + + keyval = token; + name = strsep(&keyval, "="); + if (name) { + int res; + + res = strict_strtoul(keyval, 0x10, &val); + if (res < 0) + continue; + + omap_mux_init_signal(name, (u16)val); + } + } + + kfree(options); +} + +static void __init omap_mux_set_board_signals(struct omap_board_mux *board_mux) +{ + while (board_mux->reg_offset != OMAP_MUX_TERMINATOR) { + omap_mux_write(board_mux->value, board_mux->reg_offset); + board_mux++; + } +} + +static int __init omap_mux_copy_names(struct omap_mux *src, + struct omap_mux *dst) +{ + int i; + + for (i = 0; i < OMAP_MUX_NR_MODES; i++) { + if (src->muxnames[i]) { + dst->muxnames[i] = + kmalloc(strlen(src->muxnames[i]) + 1, + GFP_KERNEL); + if (!dst->muxnames[i]) + goto free; + strcpy(dst->muxnames[i], src->muxnames[i]); + } + } + +#ifdef CONFIG_DEBUG_FS + for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { + if (src->balls[i]) { + dst->balls[i] = + kmalloc(strlen(src->balls[i]) + 1, + GFP_KERNEL); + if (!dst->balls[i]) + goto free; + strcpy(dst->balls[i], src->balls[i]); + } + } +#endif + + return 0; + +free: + omap_mux_free_names(dst); + return -ENOMEM; + +} + +#endif /* CONFIG_OMAP_MUX */ + +static u16 omap_mux_get_by_gpio(int gpio) +{ + struct omap_mux_entry *e; + u16 offset = OMAP_MUX_TERMINATOR; + + list_for_each_entry(e, &muxmodes, node) { + struct omap_mux *m = &e->mux; + if (m->gpio == gpio) { + offset = m->reg_offset; + break; + } + } + + return offset; +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +u16 omap_mux_get_gpio(int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not get gpio%i\n", gpio); + return offset; + } + + return omap_mux_read(offset); +} + +/* Needed for dynamic muxing of GPIO pins for off-idle */ +void omap_mux_set_gpio(u16 val, int gpio) +{ + u16 offset; + + offset = omap_mux_get_by_gpio(gpio); + if (offset == OMAP_MUX_TERMINATOR) { + printk(KERN_ERR "mux: Could not set gpio%i\n", gpio); + return; + } + + omap_mux_write(val, offset); +} + +static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src) +{ + struct omap_mux_entry *entry; + struct omap_mux *m; + + entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL); + if (!entry) + return NULL; + + m = &entry->mux; + memcpy(m, src, sizeof(struct omap_mux_entry)); + +#ifdef CONFIG_OMAP_MUX + if (omap_mux_copy_names(src, m)) { + kfree(entry); + return NULL; } +#endif + + mutex_lock(&muxmode_mutex); + list_add_tail(&entry->node, &muxmodes); + mutex_unlock(&muxmode_mutex); - return omap_mux_register(&arch_mux_cfg); + return m; } +/* + * Note if CONFIG_OMAP_MUX is not selected, we will only initialize + * the GPIO to mux offset mapping that is needed for dynamic muxing + * of GPIO pins for off-idle. + */ +static void __init omap_mux_init_list(struct omap_mux *superset) +{ + while (superset->reg_offset != OMAP_MUX_TERMINATOR) { + struct omap_mux *entry; + +#ifndef CONFIG_OMAP_MUX + /* Skip pins that are not muxed as GPIO by bootloader */ + if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) { + superset++; + continue; + } #endif + + entry = omap_mux_list_add(superset); + if (!entry) { + printk(KERN_ERR "mux: Could not add entry\n"); + return; + } + superset++; + } +} + +int __init omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls) +{ + if (mux_base) + return -EBUSY; + + mux_phys = mux_pbase; + mux_base = ioremap(mux_pbase, mux_size); + if (!mux_base) { + printk(KERN_ERR "mux: Could not ioremap\n"); + return -ENODEV; + } + +#ifdef CONFIG_OMAP_MUX + omap_mux_package_fixup(package_subset, superset); + omap_mux_package_init_balls(package_balls, superset); + omap_mux_set_cmdline_signals(); + omap_mux_set_board_signals(board_mux); +#endif + + omap_mux_init_list(superset); + + return 0; +} + +#endif /* CONFIG_ARCH_OMAP34XX */ + diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h new file mode 100644 index 000000000000..d8b4d5ad2278 --- /dev/null +++ b/arch/arm/mach-omap2/mux.h @@ -0,0 +1,163 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "mux34xx.h" + +#define OMAP_MUX_TERMINATOR 0xffff + +/* 34xx mux mode options for each pin. See TRM for options */ +#define OMAP_MUX_MODE0 0 +#define OMAP_MUX_MODE1 1 +#define OMAP_MUX_MODE2 2 +#define OMAP_MUX_MODE3 3 +#define OMAP_MUX_MODE4 4 +#define OMAP_MUX_MODE5 5 +#define OMAP_MUX_MODE6 6 +#define OMAP_MUX_MODE7 7 + +/* 24xx/34xx mux bit defines */ +#define OMAP_PULL_ENA (1 << 3) +#define OMAP_PULL_UP (1 << 4) +#define OMAP_ALTELECTRICALSEL (1 << 5) + +/* 34xx specific mux bit defines */ +#define OMAP_INPUT_EN (1 << 8) +#define OMAP_OFF_EN (1 << 9) +#define OMAP_OFFOUT_EN (1 << 10) +#define OMAP_OFFOUT_VAL (1 << 11) +#define OMAP_OFF_PULL_EN (1 << 12) +#define OMAP_OFF_PULL_UP (1 << 13) +#define OMAP_WAKEUP_EN (1 << 14) + +/* Active pin states */ +#define OMAP_PIN_OUTPUT 0 +#define OMAP_PIN_INPUT OMAP_INPUT_EN +#define OMAP_PIN_INPUT_PULLUP (OMAP_PULL_ENA | OMAP_INPUT_EN \ + | OMAP_PULL_UP) +#define OMAP_PIN_INPUT_PULLDOWN (OMAP_PULL_ENA | OMAP_INPUT_EN) + +/* Off mode states */ +#define OMAP_PIN_OFF_NONE 0 +#define OMAP_PIN_OFF_OUTPUT_HIGH (OMAP_OFF_EN | OMAP_OFFOUT_EN \ + | OMAP_OFFOUT_VAL) +#define OMAP_PIN_OFF_OUTPUT_LOW (OMAP_OFF_EN | OMAP_OFFOUT_EN) +#define OMAP_PIN_OFF_INPUT_PULLUP (OMAP_OFF_EN | OMAP_OFF_PULL_EN \ + | OMAP_OFF_PULL_UP) +#define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) +#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN + +#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) + +/* Flags for omap_mux_init */ +#define OMAP_PACKAGE_MASK 0xffff +#define OMAP_PACKAGE_CBP 4 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CUS 3 /* 423-pin 0.65 */ +#define OMAP_PACKAGE_CBB 2 /* 515-pin 0.40 0.50 */ +#define OMAP_PACKAGE_CBC 1 /* 515-pin 0.50 0.65 */ + + +#define OMAP_MUX_NR_MODES 8 /* Available modes */ +#define OMAP_MUX_NR_SIDES 2 /* Bottom & top */ + +/** + * struct omap_mux - data for omap mux register offset and it's value + * @reg_offset: mux register offset from the mux base + * @gpio: GPIO number + * @muxnames: available signal modes for a ball + */ +struct omap_mux { + u16 reg_offset; + u16 gpio; +#ifdef CONFIG_OMAP_MUX + char *muxnames[OMAP_MUX_NR_MODES]; +#ifdef CONFIG_DEBUG_FS + char *balls[OMAP_MUX_NR_SIDES]; +#endif +#endif +}; + +/** + * struct omap_ball - data for balls on omap package + * @reg_offset: mux register offset from the mux base + * @balls: available balls on the package + */ +struct omap_ball { + u16 reg_offset; + char *balls[OMAP_MUX_NR_SIDES]; +}; + +/** + * struct omap_board_mux - data for initializing mux registers + * @reg_offset: mux register offset from the mux base + * @mux_value: desired mux value to set + */ +struct omap_board_mux { + u16 reg_offset; + u16 value; +}; + +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX) + +/** + * omap_mux_init_gpio - initialize a signal based on the GPIO number + * @gpio: GPIO number + * @val: Options for the mux register value + */ +int omap_mux_init_gpio(int gpio, int val); + +/** + * omap_mux_init_signal - initialize a signal based on the signal name + * @muxname: Mux name in mode0_name.signal_name format + * @val: Options for the mux register value + */ +int omap_mux_init_signal(char *muxname, int val); + +#else + +static inline int omap_mux_init_gpio(int gpio, int val) +{ + return 0; +} +static inline int omap_mux_init_signal(char *muxname, int val) +{ + return 0; +} + +#endif + +/** + * omap_mux_get_gpio() - get mux register value based on GPIO number + * @gpio: GPIO number + * + */ +u16 omap_mux_get_gpio(int gpio); + +/** + * omap_mux_set_gpio() - set mux register value based on GPIO number + * @val: New mux register value + * @gpio: GPIO number + * + */ +void omap_mux_set_gpio(u16 val, int gpio); + +/** + * omap3_mux_init() - initialize mux system with board specific set + * @board_mux: Board specific mux table + * @flags: OMAP package type used for the board + */ +int omap3_mux_init(struct omap_board_mux *board_mux, int flags); + +/** + * omap_mux_init - private mux init function, do not call + */ +int omap_mux_init(u32 mux_pbase, u32 mux_size, + struct omap_mux *superset, + struct omap_mux *package_subset, + struct omap_board_mux *board_mux, + struct omap_ball *package_balls); diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c new file mode 100644 index 000000000000..68e0a595f9a1 --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.c @@ -0,0 +1,2099 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/init.h> + +#include "mux.h" + +#ifdef CONFIG_OMAP_MUX + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ + .muxnames = { m0, m1, m2, m3, m4, m5, m6, m7 }, \ +} + +#else + +#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .gpio = (g), \ +} + +#endif + +#define _OMAP3_BALLENTRY(M0, bb, bt) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##M0##_OFFSET), \ + .balls = { bb, bt }, \ +} + +/* + * Superset of all mux modes for omap3 + */ +static struct omap_mux __initdata omap3_muxmodes[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, NULL, NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, NULL, NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", "hw_dbg9", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D6, 105, + "cam_d6", NULL, NULL, NULL, + "gpio_105", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D7, 106, + "cam_d7", NULL, NULL, NULL, + "gpio_106", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D8, 107, + "cam_d8", NULL, NULL, NULL, + "gpio_107", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D9, 108, + "cam_d9", NULL, NULL, NULL, + "gpio_108", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", "hw_dbg3", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", "hw_dbg2", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", "hw_dbg11", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", "hw_dbg10", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKA, 96, + "cam_xclka", NULL, NULL, NULL, + "gpio_96", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_XCLKB, 111, + "cam_xclkb", NULL, NULL, NULL, + "gpio_111", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX0, 112, + "csi2_dx0", NULL, NULL, NULL, + "gpio_112", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DX1, 114, + "csi2_dx1", NULL, NULL, NULL, + "gpio_114", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY0, 113, + "csi2_dy0", NULL, NULL, NULL, + "gpio_113", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CSI2_DY1, 115, + "csi2_dy1", NULL, NULL, NULL, + "gpio_115", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_ACBIAS, 69, + "dss_acbias", NULL, NULL, NULL, + "gpio_69", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", NULL, "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", NULL, "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA10, 80, + "dss_data10", NULL, NULL, NULL, + "gpio_80", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA11, 81, + "dss_data11", NULL, NULL, NULL, + "gpio_81", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA12, 82, + "dss_data12", NULL, NULL, NULL, + "gpio_82", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA13, 83, + "dss_data13", NULL, NULL, NULL, + "gpio_83", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA14, 84, + "dss_data14", NULL, NULL, NULL, + "gpio_84", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA15, 85, + "dss_data15", NULL, NULL, NULL, + "gpio_85", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA16, 86, + "dss_data16", NULL, NULL, NULL, + "gpio_86", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA17, 87, + "dss_data17", NULL, NULL, NULL, + "gpio_87", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA18, 88, + "dss_data18", NULL, "mcspi3_clk", "dss_data0", + "gpio_88", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA19, 89, + "dss_data19", NULL, "mcspi3_simo", "dss_data1", + "gpio_89", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA20, 90, + "dss_data20", NULL, "mcspi3_somi", "dss_data2", + "gpio_90", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA21, 91, + "dss_data21", NULL, "mcspi3_cs0", "dss_data3", + "gpio_91", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA22, 92, + "dss_data22", NULL, "mcspi3_cs1", "dss_data4", + "gpio_92", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA23, 93, + "dss_data23", NULL, NULL, "dss_data5", + "gpio_93", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", NULL, NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", NULL, NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", NULL, "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", NULL, "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", "hw_dbg13", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", "hw_dbg12", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_VSYNC, 68, + "dss_vsync", NULL, NULL, NULL, + "gpio_68", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"), + _OMAP3_MUXENTRY(GPMC_A1, 34, + "gpmc_a1", NULL, NULL, NULL, + "gpio_34", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A10, 43, + "gpmc_a10", "sys_ndmareq3", NULL, NULL, + "gpio_43", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A2, 35, + "gpmc_a2", NULL, NULL, NULL, + "gpio_35", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A3, 36, + "gpmc_a3", NULL, NULL, NULL, + "gpio_36", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A4, 37, + "gpmc_a4", NULL, NULL, NULL, + "gpio_37", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A5, 38, + "gpmc_a5", NULL, NULL, NULL, + "gpio_38", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A6, 39, + "gpmc_a6", NULL, NULL, NULL, + "gpio_39", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A7, 40, + "gpmc_a7", NULL, NULL, NULL, + "gpio_40", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A8, 41, + "gpmc_a8", NULL, NULL, NULL, + "gpio_41", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_A9, 42, + "gpmc_a9", "sys_ndmareq2", NULL, NULL, + "gpio_42", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_CLK, 59, + "gpmc_clk", NULL, NULL, NULL, + "gpio_59", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D10, 46, + "gpmc_d10", NULL, NULL, NULL, + "gpio_46", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D11, 47, + "gpmc_d11", NULL, NULL, NULL, + "gpio_47", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D12, 48, + "gpmc_d12", NULL, NULL, NULL, + "gpio_48", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D13, 49, + "gpmc_d13", NULL, NULL, NULL, + "gpio_49", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D14, 50, + "gpmc_d14", NULL, NULL, NULL, + "gpio_50", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D15, 51, + "gpmc_d15", NULL, NULL, NULL, + "gpio_51", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D8, 44, + "gpmc_d8", NULL, NULL, NULL, + "gpio_44", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_D9, 45, + "gpmc_d9", NULL, NULL, NULL, + "gpio_45", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60, + "gpmc_nbe0_cle", NULL, NULL, NULL, + "gpio_60", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NBE1, 61, + "gpmc_nbe1", NULL, NULL, NULL, + "gpio_61", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS1, 52, + "gpmc_ncs1", NULL, NULL, NULL, + "gpio_52", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS2, 53, + "gpmc_ncs2", NULL, NULL, NULL, + "gpio_53", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS3, 54, + "gpmc_ncs3", "sys_ndmareq0", NULL, NULL, + "gpio_54", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS4, 55, + "gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt", + "gpio_55", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS5, 56, + "gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt", + "gpio_56", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS6, 57, + "gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt", + "gpio_57", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NCS7, 58, + "gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt", + "gpio_58", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_NWP, 62, + "gpmc_nwp", NULL, NULL, NULL, + "gpio_62", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT1, 63, + "gpmc_wait1", NULL, NULL, NULL, + "gpio_63", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, NULL, NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", NULL, NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HDQ_SIO, 170, + "hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe", + "gpio_170", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_CLK, 120, + "hsusb0_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA4, 188, + "hsusb0_data4", NULL, NULL, NULL, + "gpio_188", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA5, 189, + "hsusb0_data5", NULL, NULL, NULL, + "gpio_189", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA6, 190, + "hsusb0_data6", NULL, NULL, NULL, + "gpio_190", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA7, 191, + "hsusb0_data7", NULL, NULL, NULL, + "gpio_191", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DIR, 122, + "hsusb0_dir", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_NXT, 124, + "hsusb0_nxt", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_STP, 121, + "hsusb0_stp", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SCL, 168, + "i2c2_scl", NULL, NULL, NULL, + "gpio_168", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C2_SDA, 183, + "i2c2_sda", NULL, NULL, NULL, + "gpio_183", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SCL, 184, + "i2c3_scl", NULL, NULL, NULL, + "gpio_184", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C3_SDA, 185, + "i2c3_sda", NULL, NULL, NULL, + "gpio_185", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SCL, 0, + "i2c4_scl", "sys_nvmode1", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(I2C4_SDA, 0, + "i2c4_sda", "sys_nvmode2", NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU0, 11, + "jtag_emu0", NULL, NULL, NULL, + "gpio_11", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(JTAG_EMU1, 31, + "jtag_emu1", NULL, NULL, NULL, + "gpio_31", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", NULL, NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKX, 162, + "mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL, + "gpio_162", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DR, 159, + "mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL, + "gpio_159", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_DX, 158, + "mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL, + "gpio_158", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", NULL, "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSX, 161, + "mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL, + "gpio_161", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_CLKX, 117, + "mcbsp2_clkx", NULL, NULL, NULL, + "gpio_117", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DR, 118, + "mcbsp2_dr", NULL, NULL, NULL, + "gpio_118", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_DX, 119, + "mcbsp2_dx", NULL, NULL, NULL, + "gpio_119", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP2_FSX, 116, + "mcbsp2_fsx", NULL, NULL, NULL, + "gpio_116", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", NULL, NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", NULL, NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", NULL, NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", NULL, NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP_CLKS, 160, + "mcbsp_clks", NULL, "cam_shutter", NULL, + "gpio_160", "uart1_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CLK, 171, + "mcspi1_clk", "sdmmc2_dat4", NULL, NULL, + "gpio_171", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS0, 174, + "mcspi1_cs0", "sdmmc2_dat7", NULL, NULL, + "gpio_174", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", NULL, NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS2, 176, + "mcspi1_cs2", NULL, NULL, "sdmmc3_clk", + "gpio_176", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS3, 177, + "mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2", + "gpio_177", "mm2_txdat", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SIMO, 172, + "mcspi1_simo", "sdmmc2_dat5", NULL, NULL, + "gpio_172", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_SOMI, 173, + "mcspi1_somi", "sdmmc2_dat6", NULL, NULL, + "gpio_173", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CLK, 178, + "mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7", + "gpio_178", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS0, 181, + "mcspi2_cs0", "gpt11_pwm_evt", + "hsusb2_tll_data6", "hsusb2_data6", + "gpio_181", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_CS1, 182, + "mcspi2_cs1", "gpt8_pwm_evt", + "hsusb2_tll_data3", "hsusb2_data3", + "gpio_182", "mm2_txen_n", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SIMO, 179, + "mcspi2_simo", "gpt9_pwm_evt", + "hsusb2_tll_data4", "hsusb2_data4", + "gpio_179", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCSPI2_SOMI, 180, + "mcspi2_somi", "gpt10_pwm_evt", + "hsusb2_tll_data5", "hsusb2_data5", + "gpio_180", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", NULL, NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", NULL, NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", NULL, NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", NULL, NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", NULL, NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", NULL, NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT4, 126, + "sdmmc1_dat4", NULL, "sim_io", NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT5, 127, + "sdmmc1_dat5", NULL, "sim_clk", NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT6, 128, + "sdmmc1_dat6", NULL, "sim_pwrctrl", NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT7, 129, + "sdmmc1_dat7", NULL, "sim_rst", NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CLK, 130, + "sdmmc2_clk", "mcspi3_clk", NULL, NULL, + "gpio_130", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_CMD, 131, + "sdmmc2_cmd", "mcspi3_simo", NULL, NULL, + "gpio_131", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT0, 132, + "sdmmc2_dat0", "mcspi3_somi", NULL, NULL, + "gpio_132", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT1, 133, + "sdmmc2_dat1", NULL, NULL, NULL, + "gpio_133", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT2, 134, + "sdmmc2_dat2", "mcspi3_cs1", NULL, NULL, + "gpio_134", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT3, 135, + "sdmmc2_dat3", "mcspi3_cs0", NULL, NULL, + "gpio_135", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT4, 136, + "sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0", + "gpio_136", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, NULL, + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, NULL, + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT2, 4, + "sys_boot2", NULL, NULL, NULL, + "gpio_4", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, NULL, + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, NULL, + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, NULL, + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, NULL, + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT1, 10, + "sys_clkout1", NULL, NULL, NULL, + "gpio_10", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKOUT2, 186, + "sys_clkout2", NULL, NULL, NULL, + "gpio_186", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_CLKREQ, 1, + "sys_clkreq", NULL, NULL, NULL, + "gpio_1", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NIRQ, 0, + "sys_nirq", NULL, NULL, NULL, + "gpio_0", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_NRESWARM, 30, + "sys_nreswarm", NULL, NULL, NULL, + "gpio_30", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_OFF_MODE, 9, + "sys_off_mode", NULL, NULL, NULL, + "gpio_9", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", NULL, NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RX, 151, + "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk", + "gpio_151", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", NULL, NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_CTS, 144, + "uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL, + "gpio_144", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RTS, 145, + "uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL, + "gpio_145", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_RX, 147, + "uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL, + "gpio_147", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART2_TX, 146, + "uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL, + "gpio_146", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_CTS_RCTX, 163, + "uart3_cts_rctx", NULL, NULL, NULL, + "gpio_163", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RTS_SD, 164, + "uart3_rts_sd", NULL, NULL, NULL, + "gpio_164", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_RX_IRRX, 165, + "uart3_rx_irrx", NULL, NULL, NULL, + "gpio_165", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART3_TX_IRTX, 166, + "uart3_tx_irtx", NULL, NULL, NULL, + "gpio_166", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +/* + * Signals different on CBC package compared to the superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_mux __initdata omap3_cbc_subset[] = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_subset NULL +#endif + +/* + * Balls for CBC package + * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom) + * + * FIXME: What's up with the outdated TI documentation? See: + * + * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package + * http://community.ti.com/forums/t/10982.aspx + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBC) +struct omap_ball __initdata omap3_cbc_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), + _OMAP3_BALLENTRY(CAM_D10, "d25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "e26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "a24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D6, "p25", NULL), + _OMAP3_BALLENTRY(CAM_D7, "p26", NULL), + _OMAP3_BALLENTRY(CAM_D8, "n25", NULL), + _OMAP3_BALLENTRY(CAM_D9, "n26", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "b23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "c23", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL), + _OMAP3_BALLENTRY(CAM_VS, "d23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "a23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ad4", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae4", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af6", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ae6", NULL), + _OMAP3_BALLENTRY(ETK_D13, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ae9", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D3, "aa3", NULL), + _OMAP3_BALLENTRY(ETK_D4, "y3", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ab1", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ae3", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D8, "aa4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "f1", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "f2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "e2", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "d1", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"), + _OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"), + _OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"), + _OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"), + _OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"), + _OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"), + _OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"), + _OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "r2", NULL), + _OMAP3_BALLENTRY(UART1_RX, "h3", NULL), + _OMAP3_BALLENTRY(UART1_TX, "l4", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "y24", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad21", NULL), + _OMAP3_BALLENTRY(UART2_TX, "ad22", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbc_ball NULL +#endif + +/* + * Signals different on CUS package compared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_mux __initdata omap3_cus_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + _OMAP3_MUXENTRY(MCBSP3_CLKX, 142, + "mcbsp3_clkx", "uart2_tx", NULL, NULL, + "gpio_142", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DR, 141, + "mcbsp3_dr", "uart2_rts", NULL, NULL, + "gpio_141", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_DX, 140, + "mcbsp3_dx", "uart2_cts", NULL, NULL, + "gpio_140", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP3_FSX, 143, + "mcbsp3_fsx", "uart2_rx", NULL, NULL, + "gpio_143", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT5, 137, + "sdmmc2_dat5", "sdmmc2_dir_dat1", + "cam_global_reset", "sdmmc3_dat1", + "gpio_137", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT6, 138, + "sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2", + "gpio_138", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC2_DAT7, 139, + "sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3", + "gpio_139", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", NULL, NULL, NULL, + "gpio_150", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_subset NULL +#endif + +/* + * Balls for CUS package + * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CUS) +struct omap_ball __initdata omap3_cus_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ab18", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ac18", NULL), + _OMAP3_BALLENTRY(CAM_D10, "f21", NULL), + _OMAP3_BALLENTRY(CAM_D11, "g21", NULL), + _OMAP3_BALLENTRY(CAM_D2, "g19", NULL), + _OMAP3_BALLENTRY(CAM_D3, "f19", NULL), + _OMAP3_BALLENTRY(CAM_D4, "g20", NULL), + _OMAP3_BALLENTRY(CAM_D5, "b21", NULL), + _OMAP3_BALLENTRY(CAM_D6, "l24", NULL), + _OMAP3_BALLENTRY(CAM_D7, "k24", NULL), + _OMAP3_BALLENTRY(CAM_D8, "j23", NULL), + _OMAP3_BALLENTRY(CAM_D9, "k23", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "h24", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a22", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL), + _OMAP3_BALLENTRY(CAM_VS, "e18", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "f18", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL), + _OMAP3_BALLENTRY(ETK_D0, "ad6", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ac6", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ac3", NULL), + _OMAP3_BALLENTRY(ETK_D11, "ac9", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ac10", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ad11", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ac11", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ad12", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ac7", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ad8", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ac5", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ad2", NULL), + _OMAP3_BALLENTRY(ETK_D6, "ac8", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ad9", NULL), + _OMAP3_BALLENTRY(ETK_D8, "ac4", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ad5", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "k4", NULL), + _OMAP3_BALLENTRY(GPMC_A10, "g2", NULL), + _OMAP3_BALLENTRY(GPMC_A2, "k3", NULL), + _OMAP3_BALLENTRY(GPMC_A3, "k2", NULL), + _OMAP3_BALLENTRY(GPMC_A4, "j4", NULL), + _OMAP3_BALLENTRY(GPMC_A5, "j3", NULL), + _OMAP3_BALLENTRY(GPMC_A6, "j2", NULL), + _OMAP3_BALLENTRY(GPMC_A7, "j1", NULL), + _OMAP3_BALLENTRY(GPMC_A8, "h1", NULL), + _OMAP3_BALLENTRY(GPMC_A9, "h2", NULL), + _OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL), + _OMAP3_BALLENTRY(GPMC_D10, "u1", NULL), + _OMAP3_BALLENTRY(GPMC_D11, "r3", NULL), + _OMAP3_BALLENTRY(GPMC_D12, "t3", NULL), + _OMAP3_BALLENTRY(GPMC_D13, "u2", NULL), + _OMAP3_BALLENTRY(GPMC_D14, "v1", NULL), + _OMAP3_BALLENTRY(GPMC_D15, "v2", NULL), + _OMAP3_BALLENTRY(GPMC_D8, "r2", NULL), + _OMAP3_BALLENTRY(GPMC_D9, "t2", NULL), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL), + _OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "w6", NULL), + _OMAP3_BALLENTRY(UART1_RX, "v7", NULL), + _OMAP3_BALLENTRY(UART1_TX, "w7", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cus_ball NULL +#endif + +/* + * Signals different on CBB package comapared to superset + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_mux __initdata omap3_cbb_subset[] = { + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", NULL, NULL, NULL, + "gpio_109", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D11, 110, + "cam_d11", NULL, NULL, NULL, + "gpio_110", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", NULL, NULL, NULL, + "gpio_101", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", NULL, NULL, NULL, + "gpio_102", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", NULL, NULL, NULL, + "gpio_103", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", NULL, NULL, NULL, + "gpio_104", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_FLD, 98, + "cam_fld", NULL, "cam_global_reset", NULL, + "gpio_98", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", NULL, NULL, NULL, + "gpio_94", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_PCLK, 97, + "cam_pclk", NULL, NULL, NULL, + "gpio_97", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_STROBE, 126, + "cam_strobe", NULL, NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", NULL, NULL, NULL, + "gpio_95", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_WEN, 167, + "cam_wen", NULL, "cam_shutter", NULL, + "gpio_167", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", NULL, + "gpio_76", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", NULL, + "gpio_77", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, NULL, NULL, + "gpio_78", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, NULL, NULL, + "gpio_79", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_HSYNC, 67, + "dss_hsync", NULL, NULL, NULL, + "gpio_67", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_PCLK, 66, + "dss_pclk", NULL, NULL, NULL, + "gpio_66", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_CLK, 12, + "etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp", + "gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_CTL, 13, + "etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk", + "gpio_13", NULL, "hsusb1_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D0, 14, + "etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0", + "gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D1, 15, + "etk_d1", "mcspi3_somi", NULL, "hsusb1_data1", + "gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D10, 24, + "etk_d10", NULL, "uart1_rx", "hsusb2_clk", + "gpio_24", NULL, "hsusb2_tll_clk", NULL), + _OMAP3_MUXENTRY(ETK_D11, 25, + "etk_d11", NULL, NULL, "hsusb2_stp", + "gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", NULL, NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D13, 27, + "etk_d13", NULL, NULL, "hsusb2_nxt", + "gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL), + _OMAP3_MUXENTRY(ETK_D14, 28, + "etk_d14", NULL, NULL, "hsusb2_data0", + "gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL), + _OMAP3_MUXENTRY(ETK_D15, 29, + "etk_d15", NULL, NULL, "hsusb2_data1", + "gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL), + _OMAP3_MUXENTRY(ETK_D2, 16, + "etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2", + "gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL), + _OMAP3_MUXENTRY(ETK_D3, 17, + "etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7", + "gpio_17", NULL, "hsusb1_tll_data7", NULL), + _OMAP3_MUXENTRY(ETK_D4, 18, + "etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4", + "gpio_18", NULL, "hsusb1_tll_data4", NULL), + _OMAP3_MUXENTRY(ETK_D5, 19, + "etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5", + "gpio_19", NULL, "hsusb1_tll_data5", NULL), + _OMAP3_MUXENTRY(ETK_D6, 20, + "etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6", + "gpio_20", NULL, "hsusb1_tll_data6", NULL), + _OMAP3_MUXENTRY(ETK_D7, 21, + "etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3", + "gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL), + _OMAP3_MUXENTRY(ETK_D8, 22, + "etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir", + "gpio_22", NULL, "hsusb1_tll_dir", NULL), + _OMAP3_MUXENTRY(ETK_D9, 23, + "etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt", + "gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_subset NULL +#endif + +/* + * Balls for CBB package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined(CONFIG_OMAP_PACKAGE_CBB) +struct omap_ball __initdata omap3_cbb_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap3_cbb_ball NULL +#endif + +/* + * Signals different on 36XX CBP package comapared to 34XX CBC package + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP) +struct omap_mux __initdata omap36xx_cbp_subset[] = { + _OMAP3_MUXENTRY(CAM_D0, 99, + "cam_d0", NULL, "csi2_dx2", NULL, + "gpio_99", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D1, 100, + "cam_d1", NULL, "csi2_dy2", NULL, + "gpio_100", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D10, 109, + "cam_d10", "ssi2_wake", NULL, NULL, + "gpio_109", "hw_dbg8", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D2, 101, + "cam_d2", "ssi2_rdy_tx", NULL, NULL, + "gpio_101", "hw_dbg4", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D3, 102, + "cam_d3", "ssi2_dat_rx", NULL, NULL, + "gpio_102", "hw_dbg5", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D4, 103, + "cam_d4", "ssi2_flag_rx", NULL, NULL, + "gpio_103", "hw_dbg6", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_D5, 104, + "cam_d5", "ssi2_rdy_rx", NULL, NULL, + "gpio_104", "hw_dbg7", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_HS, 94, + "cam_hs", "ssi2_dat_tx", NULL, NULL, + "gpio_94", "hw_dbg0", NULL, "safe_mode"), + _OMAP3_MUXENTRY(CAM_VS, 95, + "cam_vs", "ssi2_flag_tx", NULL, NULL, + "gpio_95", "hw_dbg1", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA0, 70, + "dss_data0", "dsi_dx0", "uart1_cts", NULL, + "gpio_70", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA1, 71, + "dss_data1", "dsi_dy0", "uart1_rts", NULL, + "gpio_71", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA2, 72, + "dss_data2", "dsi_dx1", NULL, NULL, + "gpio_72", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA3, 73, + "dss_data3", "dsi_dy1", NULL, NULL, + "gpio_73", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA4, 74, + "dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL, + "gpio_74", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA5, 75, + "dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL, + "gpio_75", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA6, 76, + "dss_data6", NULL, "uart1_tx", "dssvenc656_data6", + "gpio_76", "hw_dbg14", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA7, 77, + "dss_data7", NULL, "uart1_rx", "dssvenc656_data7", + "gpio_77", "hw_dbg15", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA8, 78, + "dss_data8", NULL, "uart3_rx_irrx", NULL, + "gpio_78", "hw_dbg16", NULL, "safe_mode"), + _OMAP3_MUXENTRY(DSS_DATA9, 79, + "dss_data9", NULL, "uart3_tx_irtx", NULL, + "gpio_79", "hw_dbg17", NULL, "safe_mode"), + _OMAP3_MUXENTRY(ETK_D12, 26, + "etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir", + "gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"), + _OMAP3_MUXENTRY(GPMC_A11, 0, + "gpmc_a11", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT2, 64, + "gpmc_wait2", NULL, "uart4_tx", NULL, + "gpio_64", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(GPMC_WAIT3, 65, + "gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL, + "gpio_65", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA0, 125, + "hsusb0_data0", NULL, "uart3_tx_irtx", NULL, + "gpio_125", "uart2_tx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA1, 130, + "hsusb0_data1", NULL, "uart3_rx_irrx", NULL, + "gpio_130", "uart2_rx", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA2, 131, + "hsusb0_data2", NULL, "uart3_rts_sd", NULL, + "gpio_131", "uart2_rts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(HSUSB0_DATA3, 169, + "hsusb0_data3", NULL, "uart3_cts_rctx", NULL, + "gpio_169", "uart2_cts", NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_CLKR, 156, + "mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL, + "gpio_156", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP1_FSR, 157, + "mcbsp1_fsr", "adpllv2d_dithering_en1", + "cam_global_reset", NULL, + "gpio_157", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_CLKX, 152, + "mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL, + "gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DR, 153, + "mcbsp4_dr", "ssi1_flag_rx", NULL, NULL, + "gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_DX, 154, + "mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL, + "gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"), + _OMAP3_MUXENTRY(MCBSP4_FSX, 155, + "mcbsp4_fsx", "ssi1_wake", NULL, NULL, + "gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"), + _OMAP3_MUXENTRY(MCSPI1_CS1, 175, + "mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd", + "gpio_175", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0, + "sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD28, 0, + "sad2d_mcad28", "mad2d_mcad28", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD29, 0, + "sad2d_mcad29", "mad2d_mcad29", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD32, 0, + "sad2d_mcad32", "mad2d_mcad32", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD33, 0, + "sad2d_mcad33", "mad2d_mcad33", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD34, 0, + "sad2d_mcad34", "mad2d_mcad34", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD35, 0, + "sad2d_mcad35", "mad2d_mcad35", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MCAD36, 0, + "sad2d_mcad36", "mad2d_mcad36", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MREAD, 0, + "sad2d_mread", "mad2d_sread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_MWRITE, 0, + "sad2d_mwrite", "mad2d_swrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0, + "sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SREAD, 0, + "sad2d_sread", "mad2d_mread", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SAD2D_SWRITE, 0, + "sad2d_swrite", "mad2d_mwrite", NULL, NULL, + NULL, NULL, NULL, NULL), + _OMAP3_MUXENTRY(SDMMC1_CLK, 120, + "sdmmc1_clk", "ms_clk", NULL, NULL, + "gpio_120", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_CMD, 121, + "sdmmc1_cmd", "ms_bs", NULL, NULL, + "gpio_121", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT0, 122, + "sdmmc1_dat0", "ms_dat0", NULL, NULL, + "gpio_122", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT1, 123, + "sdmmc1_dat1", "ms_dat1", NULL, NULL, + "gpio_123", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT2, 124, + "sdmmc1_dat2", "ms_dat2", NULL, NULL, + "gpio_124", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDMMC1_DAT3, 125, + "sdmmc1_dat3", "ms_dat3", NULL, NULL, + "gpio_125", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SDRC_CKE0, 0, + "sdrc_cke0", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SDRC_CKE1, 0, + "sdrc_cke1", NULL, NULL, NULL, + NULL, NULL, NULL, "safe_mode_out1"), + _OMAP3_MUXENTRY(SIM_IO, 126, + "sim_io", "sim_io_low_impedance", NULL, NULL, + "gpio_126", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_CLK, 127, + "sim_clk", NULL, NULL, NULL, + "gpio_127", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_PWRCTRL, 128, + "sim_pwrctrl", NULL, NULL, NULL, + "gpio_128", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SIM_RST, 129, + "sim_rst", NULL, NULL, NULL, + "gpio_129", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT0, 2, + "sys_boot0", NULL, NULL, "dss_data18", + "gpio_2", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT1, 3, + "sys_boot1", NULL, NULL, "dss_data19", + "gpio_3", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT3, 5, + "sys_boot3", NULL, NULL, "dss_data20", + "gpio_5", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT4, 6, + "sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21", + "gpio_6", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT5, 7, + "sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22", + "gpio_7", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(SYS_BOOT6, 8, + "sys_boot6", NULL, NULL, "dss_data23", + "gpio_8", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_CTS, 150, + "uart1_cts", "ssi1_rdy_tx", NULL, NULL, + "gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_RTS, 149, + "uart1_rts", "ssi1_flag_tx", NULL, NULL, + "gpio_149", NULL, NULL, "safe_mode"), + _OMAP3_MUXENTRY(UART1_TX, 148, + "uart1_tx", "ssi1_dat_tx", NULL, NULL, + "gpio_148", NULL, NULL, "safe_mode"), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_subset NULL +#endif + +/* + * Balls for 36XX CBP package + * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom) + */ +#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ + && defined (CONFIG_OMAP_PACKAGE_CBP) +struct omap_ball __initdata omap36xx_cbp_ball[] = { + _OMAP3_BALLENTRY(CAM_D0, "ag17", NULL), + _OMAP3_BALLENTRY(CAM_D1, "ah17", NULL), + _OMAP3_BALLENTRY(CAM_D10, "b25", NULL), + _OMAP3_BALLENTRY(CAM_D11, "c26", NULL), + _OMAP3_BALLENTRY(CAM_D2, "b24", NULL), + _OMAP3_BALLENTRY(CAM_D3, "c24", NULL), + _OMAP3_BALLENTRY(CAM_D4, "d24", NULL), + _OMAP3_BALLENTRY(CAM_D5, "a25", NULL), + _OMAP3_BALLENTRY(CAM_D6, "k28", NULL), + _OMAP3_BALLENTRY(CAM_D7, "l28", NULL), + _OMAP3_BALLENTRY(CAM_D8, "k27", NULL), + _OMAP3_BALLENTRY(CAM_D9, "l27", NULL), + _OMAP3_BALLENTRY(CAM_FLD, "c23", NULL), + _OMAP3_BALLENTRY(CAM_HS, "a24", NULL), + _OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL), + _OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL), + _OMAP3_BALLENTRY(CAM_VS, "a23", NULL), + _OMAP3_BALLENTRY(CAM_WEN, "b23", NULL), + _OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL), + _OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL), + _OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL), + _OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL), + _OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL), + _OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL), + _OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL), + _OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL), + _OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL), + _OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL), + _OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL), + _OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL), + _OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL), + _OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL), + _OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL), + _OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL), + _OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL), + _OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL), + _OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL), + _OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL), + _OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL), + _OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL), + _OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL), + _OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL), + _OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL), + _OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL), + _OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL), + _OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL), + _OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL), + _OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL), + _OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL), + _OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL), + _OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL), + _OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL), + _OMAP3_BALLENTRY(ETK_CLK, "af10", NULL), + _OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL), + _OMAP3_BALLENTRY(ETK_D0, "af11", NULL), + _OMAP3_BALLENTRY(ETK_D1, "ag12", NULL), + _OMAP3_BALLENTRY(ETK_D10, "ae7", NULL), + _OMAP3_BALLENTRY(ETK_D11, "af7", NULL), + _OMAP3_BALLENTRY(ETK_D12, "ag7", NULL), + _OMAP3_BALLENTRY(ETK_D13, "ah7", NULL), + _OMAP3_BALLENTRY(ETK_D14, "ag8", NULL), + _OMAP3_BALLENTRY(ETK_D15, "ah8", NULL), + _OMAP3_BALLENTRY(ETK_D2, "ah12", NULL), + _OMAP3_BALLENTRY(ETK_D3, "ae13", NULL), + _OMAP3_BALLENTRY(ETK_D4, "ae11", NULL), + _OMAP3_BALLENTRY(ETK_D5, "ah9", NULL), + _OMAP3_BALLENTRY(ETK_D6, "af13", NULL), + _OMAP3_BALLENTRY(ETK_D7, "ah14", NULL), + _OMAP3_BALLENTRY(ETK_D8, "af9", NULL), + _OMAP3_BALLENTRY(ETK_D9, "ag9", NULL), + _OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"), + _OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"), + _OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"), + _OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"), + _OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"), + _OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"), + _OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"), + _OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"), + _OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"), + _OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"), + _OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"), + _OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"), + _OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"), + _OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"), + _OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"), + _OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"), + _OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"), + _OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"), + _OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"), + _OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"), + _OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"), + _OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"), + _OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"), + _OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"), + _OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"), + _OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"), + _OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"), + _OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"), + _OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"), + _OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"), + _OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL), + _OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"), + _OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"), + _OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL), + _OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL), + _OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"), + _OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"), + _OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"), + _OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"), + _OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"), + _OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL), + _OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL), + _OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL), + _OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL), + _OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL), + _OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL), + _OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL), + _OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL), + _OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL), + _OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL), + _OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL), + _OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL), + _OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL), + _OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL), + _OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL), + _OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL), + _OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL), + _OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL), + _OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL), + _OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL), + _OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL), + _OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL), + _OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL), + _OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL), + _OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL), + _OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL), + _OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL), + _OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL), + _OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL), + _OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL), + _OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL), + _OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL), + _OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL), + _OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL), + _OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL), + _OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL), + _OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL), + _OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL), + _OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL), + _OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL), + _OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL), + _OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL), + _OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL), + _OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL), + _OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL), + _OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL), + _OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL), + _OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL), + _OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL), + _OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL), + _OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"), + _OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"), + _OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"), + _OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"), + _OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"), + _OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"), + _OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"), + _OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"), + _OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"), + _OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"), + _OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"), + _OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"), + _OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"), + _OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"), + _OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"), + _OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"), + _OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"), + _OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"), + _OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"), + _OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"), + _OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"), + _OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"), + _OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"), + _OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"), + _OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"), + _OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"), + _OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"), + _OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"), + _OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"), + _OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"), + _OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"), + _OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"), + _OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"), + _OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"), + _OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"), + _OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"), + _OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"), + _OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"), + _OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"), + _OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"), + _OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"), + _OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"), + _OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"), + _OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"), + _OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"), + _OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"), + _OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"), + _OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"), + _OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"), + _OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"), + _OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"), + _OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"), + _OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"), + _OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"), + _OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"), + _OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"), + _OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"), + _OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"), + _OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"), + _OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"), + _OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"), + _OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"), + _OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"), + _OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"), + _OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"), + _OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"), + _OMAP3_BALLENTRY(SIM_CLK, "p26", NULL), + _OMAP3_BALLENTRY(SIM_IO, "p27", NULL), + _OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL), + _OMAP3_BALLENTRY(SIM_RST, "r25", NULL), + _OMAP3_BALLENTRY(SYS_32K, "ae25", NULL), + _OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL), + _OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL), + _OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL), + _OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL), + _OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL), + _OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL), + _OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL), + _OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL), + _OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL), + _OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL), + _OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL), + _OMAP3_BALLENTRY(UART1_CTS, "w8", NULL), + _OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL), + _OMAP3_BALLENTRY(UART1_RX, "y8", NULL), + _OMAP3_BALLENTRY(UART1_TX, "aa8", NULL), + _OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL), + _OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL), + _OMAP3_BALLENTRY(UART2_RX, "ad25", NULL), + _OMAP3_BALLENTRY(UART2_TX, "aa25", NULL), + _OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL), + _OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL), + _OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL), + _OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL), + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define omap36xx_cbp_ball NULL +#endif + +int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) +{ + struct omap_mux *package_subset; + struct omap_ball *package_balls; + + switch (flags & OMAP_PACKAGE_MASK) { + case (OMAP_PACKAGE_CBC): + package_subset = omap3_cbc_subset; + package_balls = omap3_cbc_ball; + break; + case (OMAP_PACKAGE_CBB): + package_subset = omap3_cbb_subset; + package_balls = omap3_cbb_ball; + break; + case (OMAP_PACKAGE_CUS): + package_subset = omap3_cus_subset; + package_balls = omap3_cus_ball; + break; + case (OMAP_PACKAGE_CBP): + package_subset = omap36xx_cbp_subset; + package_balls = omap36xx_cbp_ball; + break; + default: + printk(KERN_ERR "mux: Unknown omap package, mux disabled\n"); + return -EINVAL; + } + + return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE, + OMAP3_CONTROL_PADCONF_MUX_SIZE, + omap3_muxmodes, package_subset, board_subset, + package_balls); +} diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h new file mode 100644 index 000000000000..6543ebf8ecfc --- /dev/null +++ b/arch/arm/mach-omap2/mux34xx.h @@ -0,0 +1,398 @@ +/* + * Copyright (C) 2009 Nokia + * Copyright (C) 2009 Texas Instruments + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define OMAP3_CONTROL_PADCONF_MUX_PBASE 0x48002030LU + +#define OMAP3_MUX(mode0, mux_value) \ +{ \ + .reg_offset = (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET), \ + .value = (mux_value), \ +} + +/* + * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing + * + * Extracted from the TRM. Add 0x48002030 to these values to get the + * absolute addresses. The name in the macro is the mode-0 name of + * the pin. NOTE: These registers are 16-bits wide. + * + * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead + * of CHASSIS for some registers. For the defines, we follow the + * 36XX naming, and use SDMMC and CHASSIS. + */ +#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET 0x000 +#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET 0x002 +#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET 0x004 +#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET 0x006 +#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET 0x008 +#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET 0x00a +#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET 0x00c +#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET 0x00e +#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET 0x010 +#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET 0x012 +#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET 0x014 +#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET 0x016 +#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET 0x018 +#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET 0x01a +#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET 0x01c +#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET 0x01e +#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET 0x020 +#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET 0x022 +#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET 0x024 +#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET 0x026 +#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET 0x028 +#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET 0x02a +#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET 0x02c +#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET 0x02e +#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET 0x030 +#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET 0x032 +#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET 0x034 +#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET 0x036 +#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET 0x038 +#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET 0x03a +#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET 0x03c +#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET 0x03e +#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET 0x040 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET 0x042 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET 0x044 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET 0x046 +#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET 0x048 +#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET 0x04a +#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET 0x04c +#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET 0x04e +#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET 0x050 +#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET 0x052 +#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET 0x054 +#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET 0x056 +#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET 0x058 +#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET 0x05a +#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET 0x05c +#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET 0x05e +#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET 0x060 +#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET 0x062 +#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET 0x064 +#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET 0x066 +#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET 0x068 +#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET 0x06a +#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET 0x06c +#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET 0x06e +#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET 0x070 +#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET 0x072 +#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET 0x074 +#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET 0x076 +#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET 0x078 +#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET 0x07a +#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET 0x07c +#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET 0x07e +#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET 0x080 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET 0x082 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET 0x084 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET 0x086 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET 0x088 +#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET 0x08a +#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET 0x08c +#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET 0x08e +#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET 0x090 +#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET 0x092 +#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET 0x094 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET 0x096 +#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET 0x098 +#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET 0x09a +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET 0x09c +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET 0x09e +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET 0x0a0 +#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET 0x0a2 +#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET 0x0a4 +#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET 0x0a6 +#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET 0x0a8 +#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET 0x0aa +#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET 0x0ac +#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET 0x0ae +#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET 0x0b0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET 0x0b2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET 0x0b4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET 0x0b6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET 0x0b8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET 0x0ba +#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET 0x0bc +#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET 0x0be +#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET 0x0c0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET 0x0c2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET 0x0c4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET 0x0c6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET 0x0c8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET 0x0ca +#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET 0x0cc +#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET 0x0ce +#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET 0x0d0 +#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET 0x0d2 +#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET 0x0d4 +#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET 0x0d6 +#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET 0x0d8 +#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET 0x0da +#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET 0x0dc +#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET 0x0de +#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET 0x0e0 +#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET 0x0e2 +#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET 0x0e4 +#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET 0x0e6 +#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET 0x0e8 +#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET 0x0ea +#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET 0x0ec +#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET 0x0ee +#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET 0x0f0 +#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET 0x0f2 +#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET 0x0f4 +#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET 0x0f6 +#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET 0x0f8 +#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET 0x0fa +#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET 0x0fc +#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET 0x0fe +#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET 0x100 +#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET 0x102 +#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET 0x104 +#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET 0x106 +#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET 0x108 +#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET 0x10a +#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET 0x10c +#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET 0x10e +#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET 0x110 +#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET 0x112 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET 0x114 +#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET 0x116 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET 0x118 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET 0x11a +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET 0x11c +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET 0x11e + +/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */ +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET 0x126 + +#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET 0x128 +#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET 0x12a +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET 0x12c +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET 0x12e +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET 0x130 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET 0x132 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET 0x134 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET 0x136 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET 0x138 +#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET 0x13a +#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET 0x13c +#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET 0x13e +#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET 0x140 +#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET 0x142 +#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET 0x144 +#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET 0x146 +#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET 0x148 +#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET 0x14a +#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET 0x14c +#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET 0x14e +#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET 0x150 +#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET 0x152 +#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET 0x154 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET 0x156 +#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET 0x158 +#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET 0x15a +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET 0x15c +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET 0x15e +#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET 0x160 +#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET 0x162 +#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET 0x164 +#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET 0x166 +#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET 0x168 +#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET 0x16a +#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET 0x16c +#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET 0x16e +#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET 0x170 +#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET 0x172 +#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET 0x174 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET 0x176 +#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET 0x178 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET 0x17a +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET 0x17c +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET 0x17e +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET 0x180 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET 0x182 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET 0x184 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET 0x186 +#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET 0x188 +#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET 0x18a +#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET 0x18c +#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET 0x18e +#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET 0x190 +#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET 0x192 +#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET 0x194 +#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET 0x196 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET 0x198 +#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET 0x19a +#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET 0x19c +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET 0x19e +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET 0x1a0 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET 0x1a2 +#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET 0x1a4 +#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET 0x1a6 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET 0x1a8 +#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET 0x1aa +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET 0x1ac +#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET 0x1ae +#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET 0x1b0 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET 0x1b2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET 0x1b4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET 0x1b6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET 0x1b8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET 0x1ba +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET 0x1bc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET 0x1be +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET 0x1c0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET 0x1c2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET 0x1c4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET 0x1c6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET 0x1c8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET 0x1ca +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET 0x1cc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET 0x1ce +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET 0x1d0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET 0x1d2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET 0x1d4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET 0x1d6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET 0x1d8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET 0x1da +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET 0x1dc +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET 0x1de +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET 0x1e0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET 0x1e2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET 0x1e4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET 0x1e6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET 0x1e8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET 0x1ea +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET 0x1ec +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET 0x1ee +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET 0x1f0 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET 0x1f2 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET 0x1f4 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET 0x1f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET 0x1f8 +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET 0x1fa +#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET 0x1fc + +/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */ +#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET 0x1fe +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET 0x200 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET 0x202 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET 0x204 +#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET 0x206 +#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET 0x208 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET 0x20a +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET 0x20c +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET 0x20e +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET 0x210 +#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET 0x212 +#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET 0x214 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET 0x216 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET 0x218 +#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET 0x21a +#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET 0x21c +#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET 0x21e +#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET 0x220 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET 0x222 +#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET 0x224 + +#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET 0x226 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET 0x228 +#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET 0x22a +#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET 0x22c +#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET 0x22e +#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET 0x230 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET 0x232 +#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET 0x234 + +/* 36xx only */ +#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET 0x236 +#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET 0x570 +#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET 0x572 +#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET 0x574 +#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET 0x576 +#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET 0x578 +#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET 0x57a +#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET 0x57c +#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET 0x57e +#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET 0x580 +#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET 0x582 +#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET 0x584 +#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET 0x586 +#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET 0x588 +#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET 0x58a +#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET 0x58c +#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET 0x58e +#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET 0x590 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET 0x592 +#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET 0x594 +#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET 0x596 +#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET 0x598 +#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET 0x59a +#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET 0x59c +#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET 0x59e +#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET 0x5a0 +#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET 0x5a2 +#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET 0x5a4 + +/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */ +#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET 0x120 +#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET 0x122 +#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET 0x124 +#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET 0x126 + +#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET 0x5a8 +#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET 0x5aa +#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET 0x5ac +#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET 0x5ae +#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET 0x5b0 +#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET 0x5b2 +#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET 0x5b4 +#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET 0x5b6 +#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET 0x5b8 +#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET 0x5ba +#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET 0x5bc +#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET 0x5be +#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET 0x5c0 +#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET 0x5c2 +#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET 0x5c4 +#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET 0x5c6 +#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET 0x5c8 +#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET 0x5ca +#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET 0x9d0 +#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET 0x9d2 +#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET 0x9d4 +#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET 0x9d6 +#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET 0x9d8 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET 0x9da +#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET 0x9dc +#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET 0x9de +#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET 0x9e0 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET 0x9e2 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET 0x9e4 +#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET 0x9e6 +#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET 0x9e8 +#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET 0x9ea +#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET 0x9ec +#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET 0x9ee +#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET 0x9f0 +#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET 0x9f2 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET 0x9f4 +#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET 0x9f6 +#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET 0xa1c +#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET 0xa1e +#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET 0xa20 + +#define OMAP3_CONTROL_PADCONF_MUX_SIZE \ + (OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2) diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S index 4afadba09477..aa3f65c2ac97 100644 --- a/arch/arm/mach-omap2/omap-headsmp.S +++ b/arch/arm/mach-omap2/omap-headsmp.S @@ -27,20 +27,39 @@ * OMAP4 specific entry point for secondary CPU to jump from ROM * code. This routine also provides a holding flag into which * secondary core is held until we're ready for it to initialise. - * The primary core will update the this flag using a hardware - * register AuxCoreBoot1. + * The primary core will update this flag using a hardware + * register AuxCoreBoot0. */ ENTRY(omap_secondary_startup) - mrc p15, 0, r0, c0, c0, 5 - and r0, r0, #0x0f -hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1 - ldr r2, [r1] - cmp r2, r0 +hold: ldr r12,=0x103 + dsb + smc @ read from AuxCoreBoot0 + mov r0, r0, lsr #9 + mrc p15, 0, r4, c0, c0, 5 + and r4, r4, #0x0f + cmp r0, r4 bne hold /* - * we've been released from the cpu_release,secondary_stack + * we've been released from the wait loop,secondary_stack * should now contain the SVC stack for this core */ b secondary_startup +END(omap_secondary_startup) + +ENTRY(omap_modify_auxcoreboot0) + stmfd sp!, {r1-r12, lr} + ldr r12, =0x104 + dsb + smc + ldmfd sp!, {r1-r12, pc} +END(omap_modify_auxcoreboot0) + +ENTRY(omap_auxcoreboot_addr) + stmfd sp!, {r2-r12, lr} + ldr r12, =0x105 + dsb + smc + ldmfd sp!, {r2-r12, pc} +END(omap_auxcoreboot_addr) diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 4890bcf4dadd..38153e5fbca0 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -17,19 +17,15 @@ */ #include <linux/init.h> #include <linux/device.h> -#include <linux/jiffies.h> #include <linux/smp.h> #include <linux/io.h> +#include <asm/cacheflush.h> #include <asm/localtimer.h> #include <asm/smp_scu.h> #include <mach/hardware.h> #include <plat/common.h> -/* Registers used for communicating startup information */ -static void __iomem *omap4_auxcoreboot_reg0; -static void __iomem *omap4_auxcoreboot_reg1; - /* SCU base address */ static void __iomem *scu_base; @@ -65,8 +61,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu) int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) { - unsigned long timeout; - /* * Set synchronisation state between this boot processor * and the secondary one @@ -74,18 +68,15 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) spin_lock(&boot_lock); /* - * Update the AuxCoreBoot1 with boot state for secondary core. + * Update the AuxCoreBoot0 with boot state for secondary core. * omap_secondary_startup() routine will hold the secondary core till * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ - __raw_writel(cpu, omap4_auxcoreboot_reg1); + omap_modify_auxcoreboot0(0x200, 0x0); + flush_cache_all(); smp_wmb(); - timeout = jiffies + (1 * HZ); - while (time_before(jiffies, timeout)) - ; - /* * Now the secondary core is starting up let it run its * calibrations, then wait for it to finish @@ -99,17 +90,18 @@ static void __init wakeup_secondary(void) { /* * Write the address of secondary startup routine into the - * AuxCoreBoot0 where ROM code will jump and start executing + * AuxCoreBoot1 where ROM code will jump and start executing * on secondary core once out of WFE * A barrier is added to ensure that write buffer is drained */ - __raw_writel(virt_to_phys(omap_secondary_startup), \ - omap4_auxcoreboot_reg0); + omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup)); smp_wmb(); /* * Send a 'sev' to wake the secondary core from WFE. + * Drain the outstanding writes to memory */ + dsb(); set_event(); mb(); } @@ -136,7 +128,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = get_core_count(); unsigned int cpu = smp_processor_id(); - void __iomem *omap4_wkupgen_base; int i; /* sanity check */ @@ -168,12 +159,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - /* Never released */ - omap4_wkupgen_base = ioremap(OMAP44XX_WKUPGEN_BASE, SZ_4K); - BUG_ON(!omap4_wkupgen_base); - omap4_auxcoreboot_reg0 = omap4_wkupgen_base + 0x800; - omap4_auxcoreboot_reg1 = omap4_wkupgen_base + 0x804; - if (max_cpus > 1) { /* * Enable the local timer or broadcast device for the diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 633b216a8b26..d8c8545875b1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -45,6 +45,7 @@ #include <linux/mutex.h> #include <linux/bootmem.h> +#include <plat/common.h> #include <plat/cpu.h> #include <plat/clockdomain.h> #include <plat/powerdomain.h> @@ -210,6 +211,32 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v) } /** + * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v + * @oh: struct omap_hwmod * + * @autoidle: desired AUTOIDLE bitfield value (0 or 1) + * @v: pointer to register contents to modify + * + * Update the module autoidle bit in @v to be @autoidle for the @oh + * hwmod. The autoidle bit controls whether the module can gate + * internal clocks automatically when it isn't doing anything; the + * exact function of this bit varies on a per-module basis. This + * function does not write to the hardware. Returns -EINVAL upon + * error or 0 upon success. + */ +static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle, + u32 *v) +{ + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE)) + return -EINVAL; + + *v &= ~SYSC_AUTOIDLE_MASK; + *v |= autoidle << SYSC_AUTOIDLE_SHIFT; + + return 0; +} + +/** * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware * @oh: struct omap_hwmod * * @@ -326,6 +353,9 @@ static int _init_main_clk(struct omap_hwmod *oh) ret = -EINVAL; oh->_clk = c; + WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n", + oh->clkdev_con_id, c->name); + return ret; } @@ -557,8 +587,19 @@ static void _sysc_enable(struct omap_hwmod *oh) _set_master_standbymode(oh, idlemode, &v); } - /* XXX OCP AUTOIDLE bit? */ + if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) { + idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ? + 0 : 1; + _set_module_autoidle(oh, idlemode, &v); + } + + /* XXX OCP ENAWAKEUP bit? */ + /* + * XXX The clock framework should handle this, by + * calling into this code. But this must wait until the + * clock structures are tagged with omap_hwmod entries + */ if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT && oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY) _set_clockactivity(oh, oh->sysconfig->clockact, &v); @@ -622,7 +663,8 @@ static void _sysc_shutdown(struct omap_hwmod *oh) if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) _set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v); - /* XXX clear OCP AUTOIDLE bit? */ + if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) + _set_module_autoidle(oh, 1, &v); _write_sysconfig(v, oh); } @@ -736,7 +778,7 @@ static int _wait_target_ready(struct omap_hwmod *oh) static int _reset(struct omap_hwmod *oh) { u32 r, v; - int c; + int c = 0; if (!oh->sysconfig || !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) || @@ -758,13 +800,9 @@ static int _reset(struct omap_hwmod *oh) return r; _write_sysconfig(v, oh); - c = 0; - while (c < MAX_MODULE_RESET_WAIT && - !(omap_hwmod_readl(oh, oh->sysconfig->syss_offs) & - SYSS_RESETDONE_MASK)) { - udelay(1); - c++; - } + omap_test_timeout((omap_hwmod_readl(oh, oh->sysconfig->syss_offs) & + SYSS_RESETDONE_MASK), + MAX_MODULE_RESET_WAIT, c); if (c == MAX_MODULE_RESET_WAIT) WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n", @@ -884,33 +922,6 @@ static int _shutdown(struct omap_hwmod *oh) } /** - * _write_clockact_lock - set the module's clockactivity bits - * @oh: struct omap_hwmod * - * @clockact: CLOCKACTIVITY field bits - * - * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh - * OCP_SYSCONFIG register. Returns -EINVAL if the hwmod is in the - * wrong state or returns 0. - */ -static int _write_clockact_lock(struct omap_hwmod *oh, u8 clockact) -{ - u32 v; - - if (!oh->sysconfig || - !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)) - return -EINVAL; - - mutex_lock(&omap_hwmod_mutex); - v = oh->_sysc_cache; - _set_clockactivity(oh, clockact, &v); - _write_sysconfig(v, oh); - mutex_unlock(&omap_hwmod_mutex); - - return 0; -} - - -/** * _setup - do initial configuration of omap_hwmod * @oh: struct omap_hwmod * * @@ -948,11 +959,19 @@ static int _setup(struct omap_hwmod *oh) _enable(oh); - if (!(oh->flags & HWMOD_INIT_NO_RESET)) - _reset(oh); - - /* XXX OCP AUTOIDLE bit? */ - /* XXX OCP ENAWAKEUP bit? */ + if (!(oh->flags & HWMOD_INIT_NO_RESET)) { + /* + * XXX Do the OCP_SYSCONFIG bits need to be + * reprogrammed after a reset? If not, then this can + * be removed. If they do, then probably the + * _enable() function should be split to avoid the + * rewrite of the OCP_SYSCONFIG register. + */ + if (oh->sysconfig) { + _update_sysc_cache(oh); + _sysc_enable(oh); + } + } if (!(oh->flags & HWMOD_INIT_NO_IDLE)) _idle(oh); @@ -1348,8 +1367,9 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) /* For each IRQ, DMA, memory area, fill in array.*/ for (i = 0; i < oh->mpu_irqs_cnt; i++) { - (res + r)->start = *(oh->mpu_irqs + i); - (res + r)->end = *(oh->mpu_irqs + i); + (res + r)->name = (oh->mpu_irqs + i)->name; + (res + r)->start = (oh->mpu_irqs + i)->irq; + (res + r)->end = (oh->mpu_irqs + i)->irq; (res + r)->flags = IORESOURCE_IRQ; r++; } @@ -1454,62 +1474,6 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, } /** - * omap_hwmod_set_clockact_none - set clockactivity test to BOTH - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_both(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_BOTH); -} - -/** - * omap_hwmod_set_clockact_none - set clockactivity test to MAIN - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_main(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_MAIN); -} - -/** - * omap_hwmod_set_clockact_none - set clockactivity test to ICLK - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_ICLK); -} - -/** - * omap_hwmod_set_clockact_none - set clockactivity test to NONE - * @oh: struct omap_hwmod * - * - * On some modules, this function can affect the wakeup latency vs. - * power consumption balance. Intended to be called by the - * omap_device layer. Passes along the return value from - * _write_clockact_lock(). - */ -int omap_hwmod_set_clockact_none(struct omap_hwmod *oh) -{ - return _write_clockact_lock(oh, CLOCKACT_TEST_NONE); -} - -/** * omap_hwmod_enable_wakeup - allow device to wake up the system * @oh: struct omap_hwmod * * diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c new file mode 100644 index 000000000000..126a9396b3a8 --- /dev/null +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -0,0 +1,126 @@ +/* + * opp2420_data.c - old-style "OPP" table for OMAP2420 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +const struct prcm_config omap2420_rate_table[] = { + /* PRCM I - FAST */ + {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, + RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, + RATE_IN_242X}, + + /* PRCM II - FAST */ + {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - FAST */ + {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM II - SLOW */ + {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - SLOW */ + {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c new file mode 100644 index 000000000000..edb81672c844 --- /dev/null +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -0,0 +1,133 @@ +/* + * opp2420_data.c - old-style "OPP" table for OMAP2420 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +const struct prcm_config omap2430_rate_table[] = { + /* PRCM #4 - ratio2 (ES2.1) - FAST */ + {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - FAST */ + {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - FAST */ + {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - FAST */ + {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM #4 - ratio1 (ES2.1) - SLOW */ + {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - SLOW */ + {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - SLOW */ + {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - SLOW*/ + {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h new file mode 100644 index 000000000000..ed6df04e2f29 --- /dev/null +++ b/arch/arm/mach-omap2/opp2xxx.h @@ -0,0 +1,424 @@ +/* + * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff <r-woodruff2@ti.com> + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H +#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H + +/** + * struct prcm_config - define clock rates on a per-OPP basis (24xx) + * + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP + * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * This is deprecated. As soon as we have a decent OPP API, we should + * move all this stuff to it. + */ +struct prcm_config { + unsigned long xtal_speed; /* crystal rate */ + unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ + unsigned long mpu_speed; /* speed of MPU */ + unsigned long cm_clksel_mpu; /* mpu divider */ + unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ + unsigned long cm_clksel_gfx; /* gfx dividers */ + unsigned long cm_clksel1_core; /* major subsystem dividers */ + unsigned long cm_clksel1_pll; /* m,n */ + unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ + unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ + unsigned long base_sdrc_rfr; /* base refresh timing for a set */ + unsigned char flags; +}; + + +/* Core fields for cm_clksel, not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/*------------------------------------------------------------------------- + * Voltage/DPLL ratios + *-------------------------------------------------------------------------*/ + +/* 2430 Ratio's, 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R1_CLKSEL_L4 | R1_CLKSEL_L3) +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF) +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R2_CLKSEL_L4 | R2_CLKSEL_L3) +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF) +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Bootm (BYPASS) */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RB_CLKSEL_L4 | RB_CLKSEL_L3) +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF) +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2420 Ratio Equivalents */ +#define RXX_CLKSEL_VLYNQ (0x12 << 15) +#define RXX_CLKSEL_SSI (0x8 << 20) + +/* 2420-PRCM III 532MHz core */ +#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ +#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ +#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ +#define RIII_CM_CLKSEL1_CORE_VAL (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ + RIII_CLKSEL_L3) +#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ +#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU +#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ +#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ +#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ +#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ +#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ +#define RIII_CM_CLKSEL_DSP_VAL (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ + RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ + RIII_CLKSEL_DSP) +#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ +#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX + +/* 2420-PRCM II 600MHz core */ +#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ +#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ +#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ +#define RII_CM_CLKSEL1_CORE_VAL (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \ + RII_CLKSEL_L3) +#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ +#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU +#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ +#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ +#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ +#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ +#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RII_CM_CLKSEL_DSP_VAL (RII_SYNC_IVA | RII_CLKSEL_IVA | \ + RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ + RII_CLKSEL_DSP) +#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ +#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX + +/* 2420-PRCM I 660MHz core */ +#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ +#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ +#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ +#define RI_CM_CLKSEL1_CORE_VAL (RI_CLKSEL_USB | \ + RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RI_CLKSEL_L4 | RI_CLKSEL_L3) +#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ +#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU +#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ +#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ +#define RI_SYNC_DSP (1 << 7) /* Activate sync */ +#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ +#define RI_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RI_CM_CLKSEL_DSP_VAL (RI_SYNC_IVA | RI_CLKSEL_IVA | \ + RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ + RI_CLKSEL_DSP) +#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ +#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX + +/* 2420-PRCM VII (boot) */ +#define RVII_CLKSEL_L3 (1 << 0) +#define RVII_CLKSEL_L4 (1 << 5) +#define RVII_CLKSEL_DSS1 (1 << 8) +#define RVII_CLKSEL_DSS2 (0 << 13) +#define RVII_CLKSEL_VLYNQ (1 << 15) +#define RVII_CLKSEL_SSI (1 << 20) +#define RVII_CLKSEL_USB (1 << 25) + +#define RVII_CM_CLKSEL1_CORE_VAL (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ + RVII_CLKSEL_VLYNQ | \ + RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \ + RVII_CLKSEL_L4 | RVII_CLKSEL_L3) + +#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ +#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU + +#define RVII_CLKSEL_DSP (1 << 0) +#define RVII_CLKSEL_DSP_IF (1 << 5) +#define RVII_SYNC_DSP (0 << 7) +#define RVII_CLKSEL_IVA (1 << 8) +#define RVII_SYNC_IVA (0 << 13) +#define RVII_CM_CLKSEL_DSP_VAL (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \ + RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \ + RVII_CLKSEL_DSP) + +#define RVII_CLKSEL_GFX (1 << 0) +#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX + +/*------------------------------------------------------------------------- + * 2430 Target modes: Along with each configuration the CPU has several + * modes which goes along with them. Modes mainly are the addition of + * describe DPLL combinations to go along with a ratio. + *-------------------------------------------------------------------------*/ + +/* Hardware governed */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* + * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed + * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz + */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M5A_DPLL_MULT_13 (61 << 12) +#define M5A_DPLL_DIV_13 (2 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M5A_DPLL_MULT_19 (55 << 12) +#define M5A_DPLL_DIV_19 (3 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) +/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) +/* + * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz + */ +#define M4_DPLL_MULT_12 (133 << 12) +#define M4_DPLL_DIV_12 (3 << 8) +#define M4_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +#define M4_DPLL_MULT_13 (399 << 12) +#define M4_DPLL_DIV_13 (12 << 8) +#define M4_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +#define M4_DPLL_MULT_19 (145 << 12) +#define M4_DPLL_DIV_19 (6 << 8) +#define M4_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* + * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz + */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M3_DPLL_MULT_13 (76 << 12) +#define M3_DPLL_DIV_13 (2 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M3_DPLL_MULT_19 (17 << 12) +#define M3_DPLL_DIV_19 (0 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* + * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz + */ +#define M2_DPLL_MULT_12 (55 << 12) +#define M2_DPLL_DIV_12 (1 << 8) +#define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, + * relock time issue */ +/* Core frequency changed from 330/165 to 329/164 MHz*/ +#define M2_DPLL_MULT_13 (76 << 12) +#define M2_DPLL_DIV_13 (2 << 8) +#define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +#define M2_DPLL_MULT_19 (17 << 12) +#define M2_DPLL_DIV_19 (0 << 8) +#define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_12) + +#define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_13) + +#define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_19) + +/* + * 2430 - chassis (sedna) + * 165 (ratio1) same as above #2 + * 150 (ratio1) + * 133 (ratio2) same as above #4 + * 110 (ratio2) same as above #3 + * 104 (ratio2) + * boot (boot) + */ + +/* PRCM I target DPLL = 2*330MHz = 660MHz */ +#define MI_DPLL_MULT_12 (55 << 12) +#define MI_DPLL_DIV_12 (1 << 8) +#define MI_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +/* + * 2420 Equivalent - mode registers + * PRCM II , target DPLL = 2*300MHz = 600MHz + */ +#define MII_DPLL_MULT_12 (50 << 12) +#define MII_DPLL_DIV_12 (1 << 8) +#define MII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define MII_DPLL_MULT_13 (300 << 12) +#define MII_DPLL_DIV_13 (12 << 8) +#define MII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +/* PRCM III target DPLL = 2*266 = 532MHz*/ +#define MIII_DPLL_MULT_12 (133 << 12) +#define MIII_DPLL_DIV_12 (5 << 8) +#define MIII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_12 | \ + MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12) +#define MIII_DPLL_MULT_13 (266 << 12) +#define MIII_DPLL_DIV_13 (12 << 8) +#define MIII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_13 | \ + MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13) + +/* PRCM VII (boot bypass) */ +#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL +#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL + +/* High and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* MPU speed defines */ +#define S12M 12000000 +#define S13M 13000000 +#define S19M 19200000 +#define S26M 26000000 +#define S100M 100000000 +#define S133M 133000000 +#define S150M 150000000 +#define S164M 164000000 +#define S165M 165000000 +#define S199M 199000000 +#define S200M 200000000 +#define S266M 266000000 +#define S300M 300000000 +#define S329M 329000000 +#define S330M 330000000 +#define S399M 399000000 +#define S400M 400000000 +#define S532M 532000000 +#define S600M 600000000 +#define S658M 658000000 +#define S660M 660000000 +#define S798M 798000000 + + +extern const struct prcm_config omap2420_rate_table[]; +extern const struct prcm_config omap2430_rate_table[]; +extern const struct prcm_config *rate_table; +extern const struct prcm_config *curr_prcm_set; + +#endif diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 8baa30d2acfb..860b755d2220 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -326,7 +326,7 @@ int pm_dbg_regset_save(int reg_set) return 0; } -static const char pwrdm_state_names[][4] = { +static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = { "OFF", "RET", "INA", @@ -381,7 +381,7 @@ static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user) seq_printf(s, "%s (%s)", pwrdm->name, pwrdm_state_names[pwrdm->state]); - for (i = 0; i < 4; i++) + for (i = 0; i < PWRDM_MAX_PWRSTS; i++) seq_printf(s, ",%s:%d", pwrdm_state_names[i], pwrdm->state_counter[i]); diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index b6990e377783..26b3f3ee82a3 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -10,9 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN -# define DEBUG -#endif +#undef DEBUG #include <linux/kernel.h> #include <linux/module.h> @@ -160,7 +158,7 @@ static __init void _pwrdm_setup(struct powerdomain *pwrdm) { int i; - for (i = 0; i < 4; i++) + for (i = 0; i < PWRDM_MAX_PWRSTS; i++) pwrdm->state_counter[i] = 0; pwrdm_wait_transition(pwrdm); @@ -480,7 +478,7 @@ int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) if (IS_ERR(p)) { pr_debug("powerdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n", @@ -513,7 +511,7 @@ int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) if (IS_ERR(p)) { pr_debug("powerdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: hardware will no longer wake up %s after %s " @@ -550,7 +548,7 @@ int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) if (IS_ERR(p)) { pr_debug("powerdomain: hardware cannot set/clear wake up of " "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP, @@ -573,10 +571,10 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) { struct powerdomain *p; - if (!pwrdm1) + if (!cpu_is_omap34xx()) return -EINVAL; - if (!cpu_is_omap34xx()) + if (!pwrdm1) return -EINVAL; p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); @@ -584,7 +582,7 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) pr_debug("powerdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n", @@ -612,10 +610,10 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) { struct powerdomain *p; - if (!pwrdm1) + if (!cpu_is_omap34xx()) return -EINVAL; - if (!cpu_is_omap34xx()) + if (!pwrdm1) return -EINVAL; p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); @@ -623,7 +621,7 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) pr_debug("powerdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } pr_debug("powerdomain: will no longer prevent %s from sleeping if " @@ -655,10 +653,10 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) { struct powerdomain *p; - if (!pwrdm1) + if (!cpu_is_omap34xx()) return -EINVAL; - if (!cpu_is_omap34xx()) + if (!pwrdm1) return -EINVAL; p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs); @@ -666,7 +664,7 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2) pr_debug("powerdomain: hardware cannot set/clear sleep " "dependency affecting %s from %s\n", pwrdm1->name, pwrdm2->name); - return IS_ERR(p); + return PTR_ERR(p); } return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP, @@ -985,6 +983,9 @@ int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank) if (pwrdm->banks < (bank + 1)) return -EEXIST; + if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK) + bank = 1; + /* * The register bit names below may not correspond to the * actual names of the bits in each powerdomain's register, @@ -1032,6 +1033,9 @@ int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank) if (pwrdm->banks < (bank + 1)) return -EEXIST; + if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK) + bank = 1; + /* * The register bit names below may not correspond to the * actual names of the bits in each powerdomain's register, diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h index fd09b0827df0..588f7e07d0ea 100644 --- a/arch/arm/mach-omap2/powerdomains34xx.h +++ b/arch/arm/mach-omap2/powerdomains34xx.h @@ -190,6 +190,7 @@ static struct powerdomain mpu_34xx_pwrdm = { .wkdep_srcs = mpu_34xx_wkdeps, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, + .flags = PWRDM_HAS_MPU_QUIRK, .banks = 1, .pwrsts_mem_ret = { [0] = PWRSTS_OFF_RET, diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h index cb1ae84e0925..61ac2a418bd0 100644 --- a/arch/arm/mach-omap2/prcm-common.h +++ b/arch/arm/mach-omap2/prcm-common.h @@ -4,10 +4,12 @@ /* * OMAP2/3 PRCM base and module definitions * - * Copyright (C) 2007-2008 Texas Instruments, Inc. - * Copyright (C) 2007-2008 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley + * OMAP4 defines in this file are automatically generated from the OMAP hardware + * databases. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -49,6 +51,73 @@ #define OMAP3430_NEON_MOD 0xb00 #define OMAP3430ES2_USBHOST_MOD 0xc00 +#define BITS(n_bit) \ + (((1 << n_bit) - 1) | (1 << n_bit)) + +#define BITFIELD(l_bit, u_bit) \ + (BITS(u_bit) & ~((BITS(l_bit)) >> 1)) + +/* OMAP44XX specific module offsets */ + +/* CM1 instances */ + +#define OMAP4430_CM1_OCP_SOCKET_MOD 0x0000 +#define OMAP4430_CM1_CKGEN_MOD 0x0100 +#define OMAP4430_CM1_MPU_MOD 0x0300 +#define OMAP4430_CM1_TESLA_MOD 0x0400 +#define OMAP4430_CM1_ABE_MOD 0x0500 +#define OMAP4430_CM1_RESTORE_MOD 0x0e00 +#define OMAP4430_CM1_INSTR_MOD 0x0f00 + +/* CM2 instances */ + +#define OMAP4430_CM2_OCP_SOCKET_MOD 0x0000 +#define OMAP4430_CM2_CKGEN_MOD 0x0100 +#define OMAP4430_CM2_ALWAYS_ON_MOD 0x0600 +#define OMAP4430_CM2_CORE_MOD 0x0700 +#define OMAP4430_CM2_IVAHD_MOD 0x0f00 +#define OMAP4430_CM2_CAM_MOD 0x1000 +#define OMAP4430_CM2_DSS_MOD 0x1100 +#define OMAP4430_CM2_GFX_MOD 0x1200 +#define OMAP4430_CM2_L3INIT_MOD 0x1300 +#define OMAP4430_CM2_L4PER_MOD 0x1400 +#define OMAP4430_CM2_CEFUSE_MOD 0x1600 +#define OMAP4430_CM2_RESTORE_MOD 0x1e00 +#define OMAP4430_CM2_INSTR_MOD 0x1f00 + +/* PRM instances */ + +#define OMAP4430_PRM_OCP_SOCKET_MOD 0x0000 +#define OMAP4430_PRM_CKGEN_MOD 0x0100 +#define OMAP4430_PRM_MPU_MOD 0x0300 +#define OMAP4430_PRM_TESLA_MOD 0x0400 +#define OMAP4430_PRM_ABE_MOD 0x0500 +#define OMAP4430_PRM_ALWAYS_ON_MOD 0x0600 +#define OMAP4430_PRM_CORE_MOD 0x0700 +#define OMAP4430_PRM_IVAHD_MOD 0x0f00 +#define OMAP4430_PRM_CAM_MOD 0x1000 +#define OMAP4430_PRM_DSS_MOD 0x1100 +#define OMAP4430_PRM_GFX_MOD 0x1200 +#define OMAP4430_PRM_L3INIT_MOD 0x1300 +#define OMAP4430_PRM_L4PER_MOD 0x1400 +#define OMAP4430_PRM_CEFUSE_MOD 0x1600 +#define OMAP4430_PRM_WKUP_MOD 0x1700 +#define OMAP4430_PRM_WKUP_CM_MOD 0x1800 +#define OMAP4430_PRM_EMU_MOD 0x1900 +#define OMAP4430_PRM_EMU_CM_MOD 0x1a00 +#define OMAP4430_PRM_DEVICE_MOD 0x1b00 +#define OMAP4430_PRM_INSTR_MOD 0x1f00 + +/* SCRM instances */ + +#define OMAP4430_SCRM_SCRM_MOD 0x0000 + +/* CHIRONSS instances */ + +#define OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD 0x0000 +#define OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD 0x0200 +#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD 0x0400 +#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD 0x0800 /* 24XX register bits shared between CM & PRM registers */ diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 029d376198d4..3ea8177ffb25 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -34,6 +34,7 @@ static void __iomem *prm_base; static void __iomem *cm_base; +static void __iomem *cm2_base; #define MAX_MODULE_ENABLE_WAIT 100000 @@ -170,14 +171,12 @@ u32 prm_read_mod_reg(s16 module, u16 idx) { return __omap_prcm_read(prm_base, module, idx); } -EXPORT_SYMBOL(prm_read_mod_reg); /* Write into a register in a PRM module */ void prm_write_mod_reg(u32 val, s16 module, u16 idx) { __omap_prcm_write(val, prm_base, module, idx); } -EXPORT_SYMBOL(prm_write_mod_reg); /* Read-modify-write a register in a PRM module. Caller must lock */ u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) @@ -191,21 +190,18 @@ u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) return v; } -EXPORT_SYMBOL(prm_rmw_mod_reg_bits); /* Read a register in a CM module */ u32 cm_read_mod_reg(s16 module, u16 idx) { return __omap_prcm_read(cm_base, module, idx); } -EXPORT_SYMBOL(cm_read_mod_reg); /* Write into a register in a CM module */ void cm_write_mod_reg(u32 val, s16 module, u16 idx) { __omap_prcm_write(val, cm_base, module, idx); } -EXPORT_SYMBOL(cm_write_mod_reg); /* Read-modify-write a register in a CM module. Caller must lock */ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) @@ -219,7 +215,6 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx) return v; } -EXPORT_SYMBOL(cm_rmw_mod_reg_bits); /** * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness @@ -247,9 +242,8 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name) BUG(); /* Wait for lock */ - while (((__raw_readl(reg) & mask) != ena) && - (i++ < MAX_MODULE_ENABLE_WAIT)) - udelay(1); + omap_test_timeout(((__raw_readl(reg) & mask) == ena), + MAX_MODULE_ENABLE_WAIT, i); if (i < MAX_MODULE_ENABLE_WAIT) pr_debug("cm: Module associated with clock %s ready after %d " @@ -265,6 +259,7 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals) { prm_base = omap2_globals->prm; cm_base = omap2_globals->cm; + cm2_base = omap2_globals->cm2; } #ifdef CONFIG_ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h new file mode 100644 index 000000000000..301c810fb269 --- /dev/null +++ b/arch/arm/mach-omap2/prm-regbits-44xx.h @@ -0,0 +1,2205 @@ +/* + * OMAP44xx Power Management register bits + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H + +#include "prm.h" + + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT (1 << 1) +#define OMAP4430_ABBOFF_ACT_EXPORT_MASK BITFIELD(1, 1) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT (1 << 2) +#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_ABB_IVA_DONE_EN_SHIFT (1 << 31) +#define OMAP4430_ABB_IVA_DONE_EN_MASK BITFIELD(31, 31) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_ABB_IVA_DONE_ST_SHIFT (1 << 31) +#define OMAP4430_ABB_IVA_DONE_ST_MASK BITFIELD(31, 31) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_ABB_MPU_DONE_EN_SHIFT (1 << 7) +#define OMAP4430_ABB_MPU_DONE_EN_MASK BITFIELD(7, 7) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_ABB_MPU_DONE_ST_SHIFT (1 << 7) +#define OMAP4430_ABB_MPU_DONE_ST_MASK BITFIELD(7, 7) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_ACTIVE_FBB_SEL_SHIFT (1 << 2) +#define OMAP4430_ACTIVE_FBB_SEL_MASK BITFIELD(2, 2) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_ACTIVE_RBB_SEL_SHIFT (1 << 1) +#define OMAP4430_ACTIVE_RBB_SEL_MASK BITFIELD(1, 1) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_AESSMEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_AESSMEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_AESSMEM_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_AESSMEM_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_ABE_PWRSTST */ +#define OMAP4430_AESSMEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_AESSMEM_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_AIPOFF_SHIFT (1 << 8) +#define OMAP4430_AIPOFF_MASK BITFIELD(8, 8) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK BITFIELD(0, 1) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT (1 << 4) +#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK BITFIELD(4, 5) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT (1 << 2) +#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK BITFIELD(2, 3) + +/* Used by PM_CAM_PWRSTCTRL */ +#define OMAP4430_CAM_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_CAM_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_CAM_PWRSTST */ +#define OMAP4430_CAM_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_CAM_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by PRM_CLKREQCTRL */ +#define OMAP4430_CLKREQ_COND_SHIFT (1 << 0) +#define OMAP4430_CLKREQ_COND_MASK BITFIELD(0, 2) + +/* Used by PRM_VC_VAL_SMPS_RA_CMD */ +#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_CMDRA_VDD_CORE_L_MASK BITFIELD(0, 7) + +/* Used by PRM_VC_VAL_SMPS_RA_CMD */ +#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT (1 << 8) +#define OMAP4430_CMDRA_VDD_IVA_L_MASK BITFIELD(8, 15) + +/* Used by PRM_VC_VAL_SMPS_RA_CMD */ +#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT (1 << 16) +#define OMAP4430_CMDRA_VDD_MPU_L_MASK BITFIELD(16, 23) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_CMD_VDD_CORE_L_SHIFT (1 << 4) +#define OMAP4430_CMD_VDD_CORE_L_MASK BITFIELD(4, 4) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_CMD_VDD_IVA_L_SHIFT (1 << 12) +#define OMAP4430_CMD_VDD_IVA_L_MASK BITFIELD(12, 12) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_CMD_VDD_MPU_L_SHIFT (1 << 17) +#define OMAP4430_CMD_VDD_MPU_L_MASK BITFIELD(17, 17) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT (1 << 6) +#define OMAP4430_CORE_OCMRAM_STATEST_MASK BITFIELD(6, 7) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT (1 << 4) +#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK BITFIELD(4, 5) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_DATA_SHIFT (1 << 16) +#define OMAP4430_DATA_MASK BITFIELD(16, 23) + +/* Used by PRM_DEVICE_OFF_CTRL */ +#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT (1 << 0) +#define OMAP4430_DEVICE_OFF_ENABLE_MASK BITFIELD(0, 0) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_DFILTEREN_SHIFT (1 << 6) +#define OMAP4430_DFILTEREN_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */ +#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT (1 << 4) +#define OMAP4430_DPLL_ABE_RECAL_EN_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */ +#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT (1 << 4) +#define OMAP4430_DPLL_ABE_RECAL_ST_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT (1 << 0) +#define OMAP4430_DPLL_CORE_RECAL_EN_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT (1 << 0) +#define OMAP4430_DPLL_CORE_RECAL_ST_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT (1 << 6) +#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT (1 << 6) +#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */ +#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT (1 << 2) +#define OMAP4430_DPLL_IVA_RECAL_EN_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */ +#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT (1 << 2) +#define OMAP4430_DPLL_IVA_RECAL_ST_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT (1 << 1) +#define OMAP4430_DPLL_MPU_RECAL_EN_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT (1 << 1) +#define OMAP4430_DPLL_MPU_RECAL_ST_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT (1 << 3) +#define OMAP4430_DPLL_PER_RECAL_EN_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT (1 << 3) +#define OMAP4430_DPLL_PER_RECAL_ST_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT (1 << 7) +#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK BITFIELD(7, 7) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT (1 << 7) +#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK BITFIELD(7, 7) + +/* Used by PRM_IRQENABLE_MPU */ +#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT (1 << 5) +#define OMAP4430_DPLL_USB_RECAL_EN_MASK BITFIELD(5, 5) + +/* Used by PRM_IRQSTATUS_MPU */ +#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT (1 << 5) +#define OMAP4430_DPLL_USB_RECAL_ST_MASK BITFIELD(5, 5) + +/* Used by PM_DSS_PWRSTCTRL */ +#define OMAP4430_DSS_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_DSS_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_DSS_PWRSTCTRL */ +#define OMAP4430_DSS_MEM_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_DSS_MEM_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_DSS_PWRSTST */ +#define OMAP4430_DSS_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_DSS_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT (1 << 8) +#define OMAP4430_DUCATI_L2RAM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT (1 << 22) +#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK BITFIELD(22, 23) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT (1 << 11) +#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK BITFIELD(11, 11) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT (1 << 10) +#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK BITFIELD(10, 11) + +/* Used by RM_MPU_RSTST */ +#define OMAP4430_EMULATION_RST_SHIFT (1 << 0) +#define OMAP4430_EMULATION_RST_MASK BITFIELD(0, 0) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_EMULATION_RST1ST_SHIFT (1 << 3) +#define OMAP4430_EMULATION_RST1ST_MASK BITFIELD(3, 3) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_EMULATION_RST2ST_SHIFT (1 << 4) +#define OMAP4430_EMULATION_RST2ST_MASK BITFIELD(4, 4) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT (1 << 3) +#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK BITFIELD(3, 3) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT (1 << 4) +#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK BITFIELD(4, 4) + +/* Used by PM_EMU_PWRSTCTRL */ +#define OMAP4430_EMU_BANK_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_EMU_BANK_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_EMU_PWRSTST */ +#define OMAP4430_EMU_BANK_STATEST_SHIFT (1 << 4) +#define OMAP4430_EMU_BANK_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP + */ +#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT (1 << 0) +#define OMAP4430_ENABLE_RTA_EXPORT_MASK BITFIELD(0, 0) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC1_SHIFT (1 << 3) +#define OMAP4430_ENFUNC1_MASK BITFIELD(3, 3) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC3_SHIFT (1 << 5) +#define OMAP4430_ENFUNC3_MASK BITFIELD(5, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC4_SHIFT (1 << 6) +#define OMAP4430_ENFUNC4_MASK BITFIELD(6, 6) + +/* + * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP, + * PRM_LDO_SRAM_MPU_SETUP + */ +#define OMAP4430_ENFUNC5_SHIFT (1 << 7) +#define OMAP4430_ENFUNC5_MASK BITFIELD(7, 7) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_ERRORGAIN_SHIFT (1 << 16) +#define OMAP4430_ERRORGAIN_MASK BITFIELD(16, 23) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_ERROROFFSET_SHIFT (1 << 24) +#define OMAP4430_ERROROFFSET_MASK BITFIELD(24, 31) + +/* Used by PRM_RSTST */ +#define OMAP4430_EXTERNAL_WARM_RST_SHIFT (1 << 5) +#define OMAP4430_EXTERNAL_WARM_RST_MASK BITFIELD(5, 5) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_FORCEUPDATE_SHIFT (1 << 1) +#define OMAP4430_FORCEUPDATE_MASK BITFIELD(1, 1) + +/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */ +#define OMAP4430_FORCEUPDATEWAIT_SHIFT (1 << 8) +#define OMAP4430_FORCEUPDATEWAIT_MASK BITFIELD(8, 31) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */ +#define OMAP4430_FORCEWKUP_EN_SHIFT (1 << 10) +#define OMAP4430_FORCEWKUP_EN_MASK BITFIELD(10, 10) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */ +#define OMAP4430_FORCEWKUP_ST_SHIFT (1 << 10) +#define OMAP4430_FORCEWKUP_ST_MASK BITFIELD(10, 10) + +/* Used by PM_GFX_PWRSTCTRL */ +#define OMAP4430_GFX_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_GFX_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_GFX_PWRSTST */ +#define OMAP4430_GFX_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_GFX_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by PRM_RSTST */ +#define OMAP4430_GLOBAL_COLD_RST_SHIFT (1 << 0) +#define OMAP4430_GLOBAL_COLD_RST_MASK BITFIELD(0, 0) + +/* Used by PRM_RSTST */ +#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT (1 << 1) +#define OMAP4430_GLOBAL_WARM_SW_RST_MASK BITFIELD(1, 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_GLOBAL_WUEN_SHIFT (1 << 16) +#define OMAP4430_GLOBAL_WUEN_MASK BITFIELD(16, 16) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_HSMCODE_SHIFT (1 << 0) +#define OMAP4430_HSMCODE_MASK BITFIELD(0, 2) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_HSMODEEN_SHIFT (1 << 3) +#define OMAP4430_HSMODEEN_MASK BITFIELD(3, 3) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_HSSCLH_SHIFT (1 << 16) +#define OMAP4430_HSSCLH_MASK BITFIELD(16, 23) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_HSSCLL_SHIFT (1 << 24) +#define OMAP4430_HSSCLL_MASK BITFIELD(24, 31) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_HWA_MEM_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_HWA_MEM_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_HWA_MEM_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_HWA_MEM_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_HWA_MEM_STATEST_SHIFT (1 << 4) +#define OMAP4430_HWA_MEM_STATEST_MASK BITFIELD(4, 5) + +/* Used by RM_MPU_RSTST */ +#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT (1 << 1) +#define OMAP4430_ICECRUSHER_MPU_RST_MASK BITFIELD(1, 1) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_ICECRUSHER_RST1ST_SHIFT (1 << 5) +#define OMAP4430_ICECRUSHER_RST1ST_MASK BITFIELD(5, 5) + +/* Used by RM_DUCATI_RSTST */ +#define OMAP4430_ICECRUSHER_RST2ST_SHIFT (1 << 6) +#define OMAP4430_ICECRUSHER_RST2ST_MASK BITFIELD(6, 6) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT (1 << 5) +#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK BITFIELD(5, 5) + +/* Used by RM_IVAHD_RSTST */ +#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT (1 << 6) +#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK BITFIELD(6, 6) + +/* Used by PRM_RSTST */ +#define OMAP4430_ICEPICK_RST_SHIFT (1 << 9) +#define OMAP4430_ICEPICK_RST_MASK BITFIELD(9, 9) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_INITVDD_SHIFT (1 << 2) +#define OMAP4430_INITVDD_MASK BITFIELD(2, 2) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_INITVOLTAGE_SHIFT (1 << 8) +#define OMAP4430_INITVOLTAGE_MASK BITFIELD(8, 15) + +/* + * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, + * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, + * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + */ +#define OMAP4430_INTRANSITION_SHIFT (1 << 20) +#define OMAP4430_INTRANSITION_MASK BITFIELD(20, 20) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_IO_EN_SHIFT (1 << 9) +#define OMAP4430_IO_EN_MASK BITFIELD(9, 9) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_IO_ON_STATUS_SHIFT (1 << 5) +#define OMAP4430_IO_ON_STATUS_MASK BITFIELD(5, 5) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_IO_ST_SHIFT (1 << 9) +#define OMAP4430_IO_ST_MASK BITFIELD(9, 9) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_ISOCLK_OVERRIDE_SHIFT (1 << 0) +#define OMAP4430_ISOCLK_OVERRIDE_MASK BITFIELD(0, 0) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_ISOCLK_STATUS_SHIFT (1 << 1) +#define OMAP4430_ISOCLK_STATUS_MASK BITFIELD(1, 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_ISOOVR_EXTEND_SHIFT (1 << 4) +#define OMAP4430_ISOOVR_EXTEND_MASK BITFIELD(4, 4) + +/* Used by PRM_IO_COUNT */ +#define OMAP4430_ISO_2_ON_TIME_SHIFT (1 << 0) +#define OMAP4430_ISO_2_ON_TIME_MASK BITFIELD(0, 7) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_L3INIT_PWRSTCTRL */ +#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_L3INIT_PWRSTST */ +#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT (1 << 4) +#define OMAP4430_L3INIT_BANK1_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PM_CORE_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, + * PM_MPU_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, + * PM_IVAHD_PWRSTCTRL + */ +#define OMAP4430_LOGICRETSTATE_SHIFT (1 << 2) +#define OMAP4430_LOGICRETSTATE_MASK BITFIELD(2, 2) + +/* + * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, + * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, + * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + */ +#define OMAP4430_LOGICSTATEST_SHIFT (1 << 2) +#define OMAP4430_LOGICSTATEST_MASK BITFIELD(2, 2) + +/* + * Used by RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT, + * RM_WKUP_L4WKUP_CONTEXT, RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT, + * RM_WKUP_SYNCTIMER_CONTEXT, RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT, + * RM_WKUP_USIM_CONTEXT, RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT, + * RM_EMU_DEBUGSS_CONTEXT, RM_D2D_SAD2D_CONTEXT, RM_D2D_SAD2D_FW_CONTEXT, + * RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT, + * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_OCP_WP1_CONTEXT, + * RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT, RM_L3_2_OCMC_RAM_CONTEXT, + * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT, RM_MEMIF_DLL_CONTEXT, + * RM_MEMIF_DLL_H_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, + * RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT, RM_L3INIT_CCPTX_CONTEXT, + * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, + * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT, + * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT, + * RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT, + * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT, + * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT, + * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT, + * RM_ABE_WDT3_CONTEXT, RM_GFX_GFX_CONTEXT, RM_MPU_MPU_CONTEXT, + * RM_CEFUSE_CEFUSE_CONTEXT, RM_ALWON_MDMINTC_CONTEXT, + * RM_ALWON_SR_CORE_CONTEXT, RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT, + * RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT, RM_L4PER_ADC_CONTEXT, + * RM_L4PER_DMTIMER10_CONTEXT, RM_L4PER_DMTIMER11_CONTEXT, + * RM_L4PER_DMTIMER2_CONTEXT, RM_L4PER_DMTIMER3_CONTEXT, + * RM_L4PER_DMTIMER4_CONTEXT, RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT, + * RM_L4PER_HDQ1W_CONTEXT, RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, + * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT, + * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT, + * RM_L4PER_MCASP3_CONTEXT, RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT, + * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT, + * RM_L4PER_MGATE_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, + * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_MSPROHG_CONTEXT, + * RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT, + * RM_TESLA_TESLA_CONTEXT, RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT + */ +#define OMAP4430_LOSTCONTEXT_DFF_SHIFT (1 << 0) +#define OMAP4430_LOSTCONTEXT_DFF_MASK BITFIELD(0, 0) + +/* + * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT, + * RM_D2D_SAD2D_FW_CONTEXT, RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT, + * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT, + * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT, + * RM_L4CFG_MAILBOX_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT, + * RM_MEMIF_EMIF_2_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT, + * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_L3INIT_HSI_CONTEXT, + * RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_MMC6_CONTEXT, + * RM_L3INIT_USB_HOST_CONTEXT, RM_L3INIT_USB_HOST_FS_CONTEXT, + * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_USB_TLL_CONTEXT, RM_DSS_DSS_CONTEXT, + * RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT, RM_L4PER_GPIO4_CONTEXT, + * RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT, RM_L4PER_I2C1_CONTEXT, + * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT, + * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4SEC_AES1_CONTEXT, + * RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, RM_L4SEC_DES3DES_CONTEXT, + * RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, RM_TESLA_TESLA_CONTEXT + */ +#define OMAP4430_LOSTCONTEXT_RFF_SHIFT (1 << 1) +#define OMAP4430_LOSTCONTEXT_RFF_MASK BITFIELD(1, 1) + +/* Used by RM_ABE_AESS_CONTEXT */ +#define OMAP4430_LOSTMEM_AESSMEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_AESSMEM_MASK BITFIELD(8, 8) + +/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */ +#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CAM_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_L3INSTR_OCP_WP1_CONTEXT */ +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK BITFIELD(8, 8) + +/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */ +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK BITFIELD(9, 9) + +/* Used by RM_L3_2_OCMC_RAM_CONTEXT */ +#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK BITFIELD(8, 8) + +/* + * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT, + * RM_SDMA_SDMA_CONTEXT + */ +#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK BITFIELD(8, 8) + +/* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */ +#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_DSS_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_DUCATI_DUCATI_CONTEXT */ +#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK BITFIELD(9, 9) + +/* Used by RM_DUCATI_DUCATI_CONTEXT */ +#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK BITFIELD(8, 8) + +/* Used by RM_EMU_DEBUGSS_CONTEXT */ +#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_EMU_BANK_MASK BITFIELD(8, 8) + +/* Used by RM_GFX_GFX_CONTEXT */ +#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_GFX_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_IVAHD_CONTEXT */ +#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT (1 << 10) +#define OMAP4430_LOSTMEM_HWA_MEM_MASK BITFIELD(10, 10) + +/* + * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT, + * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, + * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, RM_L3INIT_SATA_CONTEXT, + * RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT, + * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT + */ +#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK BITFIELD(8, 8) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP4430_LOSTMEM_MPU_L1_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_MPU_L1_MASK BITFIELD(8, 8) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP4430_LOSTMEM_MPU_L2_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_MPU_L2_MASK BITFIELD(9, 9) + +/* Used by RM_MPU_MPU_CONTEXT */ +#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT (1 << 10) +#define OMAP4430_LOSTMEM_MPU_RAM_MASK BITFIELD(10, 10) + +/* + * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT, + * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT, + * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT + */ +#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK BITFIELD(8, 8) + +/* + * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, + * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT + */ +#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_PERIHPMEM_MASK BITFIELD(8, 8) + +/* + * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT, + * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, + * RM_L4SEC_CRYPTODMA_CONTEXT + */ +#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_SL2_CONTEXT */ +#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_SL2_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_IVAHD_CONTEXT */ +#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_TCM1_MEM_MASK BITFIELD(8, 8) + +/* Used by RM_IVAHD_IVAHD_CONTEXT */ +#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_TCM2_MEM_MASK BITFIELD(9, 9) + +/* Used by RM_TESLA_TESLA_CONTEXT */ +#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT (1 << 10) +#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK BITFIELD(10, 10) + +/* Used by RM_TESLA_TESLA_CONTEXT */ +#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_TESLA_L1_MASK BITFIELD(8, 8) + +/* Used by RM_TESLA_TESLA_CONTEXT */ +#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT (1 << 9) +#define OMAP4430_LOSTMEM_TESLA_L2_MASK BITFIELD(9, 9) + +/* Used by RM_WKUP_SARRAM_CONTEXT */ +#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT (1 << 8) +#define OMAP4430_LOSTMEM_WKUP_BANK_MASK BITFIELD(8, 8) + +/* + * Used by PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, + * PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL, + * PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL + */ +#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT (1 << 4) +#define OMAP4430_LOWPOWERSTATECHANGE_MASK BITFIELD(4, 4) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_MEMORYCHANGE_SHIFT (1 << 3) +#define OMAP4430_MEMORYCHANGE_MASK BITFIELD(3, 3) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_READY_SHIFT (1 << 1) +#define OMAP4430_MODEM_READY_MASK BITFIELD(1, 1) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT (1 << 9) +#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK BITFIELD(9, 9) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_SLEEP_ST_SHIFT (1 << 16) +#define OMAP4430_MODEM_SLEEP_ST_MASK BITFIELD(16, 16) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_MODEM_WAKE_IRQ_SHIFT (1 << 8) +#define OMAP4430_MODEM_WAKE_IRQ_MASK BITFIELD(8, 8) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L1_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_MPU_L1_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L1_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_MPU_L1_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP4430_MPU_L1_STATEST_SHIFT (1 << 4) +#define OMAP4430_MPU_L1_STATEST_MASK BITFIELD(4, 5) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L2_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_MPU_L2_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_L2_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_MPU_L2_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP4430_MPU_L2_STATEST_SHIFT (1 << 6) +#define OMAP4430_MPU_L2_STATEST_MASK BITFIELD(6, 7) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_RAM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_MPU_RAM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_MPU_PWRSTCTRL */ +#define OMAP4430_MPU_RAM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_MPU_RAM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_MPU_PWRSTST */ +#define OMAP4430_MPU_RAM_STATEST_SHIFT (1 << 8) +#define OMAP4430_MPU_RAM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PRM_RSTST */ +#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT (1 << 2) +#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK BITFIELD(2, 2) + +/* Used by PRM_RSTST */ +#define OMAP4430_MPU_WDT_RST_SHIFT (1 << 3) +#define OMAP4430_MPU_WDT_RST_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_L4PER_PWRSTST */ +#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT (1 << 6) +#define OMAP4430_NONRETAINED_BANK_STATEST_MASK BITFIELD(6, 7) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT (1 << 24) +#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK BITFIELD(24, 25) + +/* Used by PM_CORE_PWRSTCTRL */ +#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT (1 << 12) +#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK BITFIELD(12, 12) + +/* Used by PM_CORE_PWRSTST */ +#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT (1 << 12) +#define OMAP4430_OCP_NRET_BANK_STATEST_MASK BITFIELD(12, 13) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_OFF_SHIFT (1 << 0) +#define OMAP4430_OFF_MASK BITFIELD(0, 7) + +/* Used by PRM_LDO_BANDGAP_CTRL */ +#define OMAP4430_OFF_ENABLE_SHIFT (1 << 0) +#define OMAP4430_OFF_ENABLE_MASK BITFIELD(0, 0) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_ON_SHIFT (1 << 24) +#define OMAP4430_ON_MASK BITFIELD(24, 31) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_ONLP_SHIFT (1 << 16) +#define OMAP4430_ONLP_MASK BITFIELD(16, 23) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_OPP_CHANGE_SHIFT (1 << 2) +#define OMAP4430_OPP_CHANGE_MASK BITFIELD(2, 2) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_OPP_SEL_SHIFT (1 << 0) +#define OMAP4430_OPP_SEL_MASK BITFIELD(0, 1) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP4430_PCHARGECNT_VALUE_SHIFT (1 << 0) +#define OMAP4430_PCHARGECNT_VALUE_MASK BITFIELD(0, 5) + +/* Used by PRM_PSCON_COUNT */ +#define OMAP4430_PCHARGE_TIME_SHIFT (1 << 0) +#define OMAP4430_PCHARGE_TIME_MASK BITFIELD(0, 7) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_PERIPHMEM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_ABE_PWRSTCTRL */ +#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_PERIPHMEM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_ABE_PWRSTST */ +#define OMAP4430_PERIPHMEM_STATEST_SHIFT (1 << 8) +#define OMAP4430_PERIPHMEM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PRM_PHASE1_CNDP */ +#define OMAP4430_PHASE1_CNDP_SHIFT (1 << 0) +#define OMAP4430_PHASE1_CNDP_MASK BITFIELD(0, 31) + +/* Used by PRM_PHASE2A_CNDP */ +#define OMAP4430_PHASE2A_CNDP_SHIFT (1 << 0) +#define OMAP4430_PHASE2A_CNDP_MASK BITFIELD(0, 31) + +/* Used by PRM_PHASE2B_CNDP */ +#define OMAP4430_PHASE2B_CNDP_SHIFT (1 << 0) +#define OMAP4430_PHASE2B_CNDP_MASK BITFIELD(0, 31) + +/* Used by PRM_PSCON_COUNT */ +#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT (1 << 8) +#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK BITFIELD(8, 15) + +/* + * Used by PM_EMU_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, + * PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, + * PM_CEFUSE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, + * PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL + */ +#define OMAP4430_POWERSTATE_SHIFT (1 << 0) +#define OMAP4430_POWERSTATE_MASK BITFIELD(0, 1) + +/* + * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST, + * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST, + * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST + */ +#define OMAP4430_POWERSTATEST_SHIFT (1 << 0) +#define OMAP4430_POWERSTATEST_MASK BITFIELD(0, 1) + +/* Used by PRM_PWRREQCTRL */ +#define OMAP4430_PWRREQ_COND_SHIFT (1 << 0) +#define OMAP4430_PWRREQ_COND_MASK BITFIELD(0, 1) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RACEN_VDD_CORE_L_SHIFT (1 << 3) +#define OMAP4430_RACEN_VDD_CORE_L_MASK BITFIELD(3, 3) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RACEN_VDD_IVA_L_SHIFT (1 << 11) +#define OMAP4430_RACEN_VDD_IVA_L_MASK BITFIELD(11, 11) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RACEN_VDD_MPU_L_SHIFT (1 << 20) +#define OMAP4430_RACEN_VDD_MPU_L_MASK BITFIELD(20, 20) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAC_VDD_CORE_L_SHIFT (1 << 2) +#define OMAP4430_RAC_VDD_CORE_L_MASK BITFIELD(2, 2) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAC_VDD_IVA_L_SHIFT (1 << 10) +#define OMAP4430_RAC_VDD_IVA_L_MASK BITFIELD(10, 10) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAC_VDD_MPU_L_SHIFT (1 << 19) +#define OMAP4430_RAC_VDD_MPU_L_MASK BITFIELD(19, 19) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_DOWN_COUNT_SHIFT (1 << 16) +#define OMAP4430_RAMP_DOWN_COUNT_MASK BITFIELD(16, 21) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT (1 << 24) +#define OMAP4430_RAMP_DOWN_PRESCAL_MASK BITFIELD(24, 25) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_UP_COUNT_SHIFT (1 << 0) +#define OMAP4430_RAMP_UP_COUNT_MASK BITFIELD(0, 5) + +/* + * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP, + * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF, + * PRM_VOLTSETUP_MPU_RET_SLEEP + */ +#define OMAP4430_RAMP_UP_PRESCAL_SHIFT (1 << 8) +#define OMAP4430_RAMP_UP_PRESCAL_MASK BITFIELD(8, 9) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAV_VDD_CORE_L_SHIFT (1 << 1) +#define OMAP4430_RAV_VDD_CORE_L_MASK BITFIELD(1, 1) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAV_VDD_IVA_L_SHIFT (1 << 9) +#define OMAP4430_RAV_VDD_IVA_L_MASK BITFIELD(9, 9) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_RAV_VDD_MPU_L_SHIFT (1 << 18) +#define OMAP4430_RAV_VDD_MPU_L_MASK BITFIELD(18, 18) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_REGADDR_SHIFT (1 << 8) +#define OMAP4430_REGADDR_MASK BITFIELD(8, 15) + +/* + * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L, + * PRM_VC_VAL_CMD_VDD_MPU_L + */ +#define OMAP4430_RET_SHIFT (1 << 8) +#define OMAP4430_RET_MASK BITFIELD(8, 15) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_RETAINED_BANK_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_L4PER_PWRSTCTRL */ +#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_RETAINED_BANK_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_L4PER_PWRSTST */ +#define OMAP4430_RETAINED_BANK_STATEST_SHIFT (1 << 4) +#define OMAP4430_RETAINED_BANK_STATEST_MASK BITFIELD(4, 5) + +/* + * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, + * PRM_LDO_SRAM_MPU_CTRL + */ +#define OMAP4430_RETMODE_ENABLE_SHIFT (1 << 0) +#define OMAP4430_RETMODE_ENABLE_MASK BITFIELD(0, 0) + +/* Used by REVISION_PRM */ +#define OMAP4430_REV_SHIFT (1 << 0) +#define OMAP4430_REV_MASK BITFIELD(0, 7) + +/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */ +#define OMAP4430_RST1_SHIFT (1 << 0) +#define OMAP4430_RST1_MASK BITFIELD(0, 0) + +/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */ +#define OMAP4430_RST1ST_SHIFT (1 << 0) +#define OMAP4430_RST1ST_MASK BITFIELD(0, 0) + +/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */ +#define OMAP4430_RST2_SHIFT (1 << 1) +#define OMAP4430_RST2_MASK BITFIELD(1, 1) + +/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */ +#define OMAP4430_RST2ST_SHIFT (1 << 1) +#define OMAP4430_RST2ST_MASK BITFIELD(1, 1) + +/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */ +#define OMAP4430_RST3_SHIFT (1 << 2) +#define OMAP4430_RST3_MASK BITFIELD(2, 2) + +/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */ +#define OMAP4430_RST3ST_SHIFT (1 << 2) +#define OMAP4430_RST3ST_MASK BITFIELD(2, 2) + +/* Used by PRM_RSTTIME */ +#define OMAP4430_RSTTIME1_SHIFT (1 << 0) +#define OMAP4430_RSTTIME1_MASK BITFIELD(0, 9) + +/* Used by PRM_RSTTIME */ +#define OMAP4430_RSTTIME2_SHIFT (1 << 10) +#define OMAP4430_RSTTIME2_MASK BITFIELD(10, 14) + +/* Used by PRM_RSTCTRL */ +#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT (1 << 1) +#define OMAP4430_RST_GLOBAL_COLD_SW_MASK BITFIELD(1, 1) + +/* Used by PRM_RSTCTRL */ +#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT (1 << 0) +#define OMAP4430_RST_GLOBAL_WARM_SW_MASK BITFIELD(0, 0) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_SA_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_SA_VDD_CORE_L_MASK BITFIELD(0, 0) + +/* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */ +#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT (1 << 0) +#define OMAP4430_SA_VDD_CORE_L_0_6_MASK BITFIELD(0, 6) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_SA_VDD_IVA_L_SHIFT (1 << 8) +#define OMAP4430_SA_VDD_IVA_L_MASK BITFIELD(8, 8) + +/* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */ +#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT (1 << 8) +#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK BITFIELD(8, 14) + +/* Used by PRM_VC_CFG_CHANNEL */ +#define OMAP4430_SA_VDD_MPU_L_SHIFT (1 << 16) +#define OMAP4430_SA_VDD_MPU_L_MASK BITFIELD(16, 16) + +/* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */ +#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT (1 << 16) +#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK BITFIELD(16, 22) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_SCLH_SHIFT (1 << 0) +#define OMAP4430_SCLH_MASK BITFIELD(0, 7) + +/* Used by PRM_VC_CFG_I2C_CLK */ +#define OMAP4430_SCLL_SHIFT (1 << 8) +#define OMAP4430_SCLL_MASK BITFIELD(8, 15) + +/* Used by PRM_RSTST */ +#define OMAP4430_SECURE_WDT_RST_SHIFT (1 << 4) +#define OMAP4430_SECURE_WDT_RST_MASK BITFIELD(4, 4) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_SL2_MEM_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_SL2_MEM_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_SL2_MEM_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_SL2_MEM_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_SL2_MEM_STATEST_SHIFT (1 << 6) +#define OMAP4430_SL2_MEM_STATEST_MASK BITFIELD(6, 7) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_SLAVEADDR_SHIFT (1 << 0) +#define OMAP4430_SLAVEADDR_MASK BITFIELD(0, 6) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_SLEEP_RBB_SEL_SHIFT (1 << 3) +#define OMAP4430_SLEEP_RBB_SEL_MASK BITFIELD(3, 3) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP4430_SLPCNT_VALUE_SHIFT (1 << 16) +#define OMAP4430_SLPCNT_VALUE_MASK BITFIELD(16, 23) + +/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ +#define OMAP4430_SMPSWAITTIMEMAX_SHIFT (1 << 8) +#define OMAP4430_SMPSWAITTIMEMAX_MASK BITFIELD(8, 23) + +/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ +#define OMAP4430_SMPSWAITTIMEMIN_SHIFT (1 << 8) +#define OMAP4430_SMPSWAITTIMEMIN_MASK BITFIELD(8, 23) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_SR2EN_SHIFT (1 << 0) +#define OMAP4430_SR2EN_MASK BITFIELD(0, 0) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_SR2_IN_TRANSITION_SHIFT (1 << 6) +#define OMAP4430_SR2_IN_TRANSITION_MASK BITFIELD(6, 6) + +/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */ +#define OMAP4430_SR2_STATUS_SHIFT (1 << 3) +#define OMAP4430_SR2_STATUS_MASK BITFIELD(3, 4) + +/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */ +#define OMAP4430_SR2_WTCNT_VALUE_SHIFT (1 << 8) +#define OMAP4430_SR2_WTCNT_VALUE_MASK BITFIELD(8, 15) + +/* + * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, + * PRM_LDO_SRAM_MPU_CTRL + */ +#define OMAP4430_SRAMLDO_STATUS_SHIFT (1 << 8) +#define OMAP4430_SRAMLDO_STATUS_MASK BITFIELD(8, 8) + +/* + * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL, + * PRM_LDO_SRAM_MPU_CTRL + */ +#define OMAP4430_SRAM_IN_TRANSITION_SHIFT (1 << 9) +#define OMAP4430_SRAM_IN_TRANSITION_MASK BITFIELD(9, 9) + +/* Used by PRM_VC_CFG_I2C_MODE */ +#define OMAP4430_SRMODEEN_SHIFT (1 << 4) +#define OMAP4430_SRMODEEN_MASK BITFIELD(4, 4) + +/* Used by PRM_VOLTSETUP_WARMRESET */ +#define OMAP4430_STABLE_COUNT_SHIFT (1 << 0) +#define OMAP4430_STABLE_COUNT_MASK BITFIELD(0, 5) + +/* Used by PRM_VOLTSETUP_WARMRESET */ +#define OMAP4430_STABLE_PRESCAL_SHIFT (1 << 8) +#define OMAP4430_STABLE_PRESCAL_MASK BITFIELD(8, 9) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_TCM1_MEM_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_TCM1_MEM_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_TCM1_MEM_STATEST_SHIFT (1 << 8) +#define OMAP4430_TCM1_MEM_STATEST_MASK BITFIELD(8, 9) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT (1 << 22) +#define OMAP4430_TCM2_MEM_ONSTATE_MASK BITFIELD(22, 23) + +/* Used by PM_IVAHD_PWRSTCTRL */ +#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT (1 << 11) +#define OMAP4430_TCM2_MEM_RETSTATE_MASK BITFIELD(11, 11) + +/* Used by PM_IVAHD_PWRSTST */ +#define OMAP4430_TCM2_MEM_STATEST_SHIFT (1 << 10) +#define OMAP4430_TCM2_MEM_STATEST_MASK BITFIELD(10, 11) + +/* Used by RM_TESLA_RSTST */ +#define OMAP4430_TESLASS_EMU_RSTST_SHIFT (1 << 2) +#define OMAP4430_TESLASS_EMU_RSTST_MASK BITFIELD(2, 2) + +/* Used by RM_TESLA_RSTST */ +#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT (1 << 3) +#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK BITFIELD(3, 3) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT (1 << 20) +#define OMAP4430_TESLA_EDMA_ONSTATE_MASK BITFIELD(20, 21) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT (1 << 10) +#define OMAP4430_TESLA_EDMA_RETSTATE_MASK BITFIELD(10, 10) + +/* Used by PM_TESLA_PWRSTST */ +#define OMAP4430_TESLA_EDMA_STATEST_SHIFT (1 << 8) +#define OMAP4430_TESLA_EDMA_STATEST_MASK BITFIELD(8, 9) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L1_ONSTATE_SHIFT (1 << 16) +#define OMAP4430_TESLA_L1_ONSTATE_MASK BITFIELD(16, 17) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L1_RETSTATE_SHIFT (1 << 8) +#define OMAP4430_TESLA_L1_RETSTATE_MASK BITFIELD(8, 8) + +/* Used by PM_TESLA_PWRSTST */ +#define OMAP4430_TESLA_L1_STATEST_SHIFT (1 << 4) +#define OMAP4430_TESLA_L1_STATEST_MASK BITFIELD(4, 5) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L2_ONSTATE_SHIFT (1 << 18) +#define OMAP4430_TESLA_L2_ONSTATE_MASK BITFIELD(18, 19) + +/* Used by PM_TESLA_PWRSTCTRL */ +#define OMAP4430_TESLA_L2_RETSTATE_SHIFT (1 << 9) +#define OMAP4430_TESLA_L2_RETSTATE_MASK BITFIELD(9, 9) + +/* Used by PM_TESLA_PWRSTST */ +#define OMAP4430_TESLA_L2_STATEST_SHIFT (1 << 6) +#define OMAP4430_TESLA_L2_STATEST_MASK BITFIELD(6, 7) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP4430_TIMEOUT_SHIFT (1 << 0) +#define OMAP4430_TIMEOUT_MASK BITFIELD(0, 15) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_TIMEOUTEN_SHIFT (1 << 3) +#define OMAP4430_TIMEOUTEN_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_TRANSITION_EN_SHIFT (1 << 8) +#define OMAP4430_TRANSITION_EN_MASK BITFIELD(8, 8) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_TRANSITION_ST_SHIFT (1 << 8) +#define OMAP4430_TRANSITION_ST_MASK BITFIELD(8, 8) + +/* Used by PRM_VC_VAL_BYPASS */ +#define OMAP4430_VALID_SHIFT (1 << 24) +#define OMAP4430_VALID_MASK BITFIELD(24, 24) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_BYPASSACK_EN_SHIFT (1 << 14) +#define OMAP4430_VC_BYPASSACK_EN_MASK BITFIELD(14, 14) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_BYPASSACK_ST_SHIFT (1 << 14) +#define OMAP4430_VC_BYPASSACK_ST_MASK BITFIELD(14, 14) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_IVA_VPACK_EN_SHIFT (1 << 30) +#define OMAP4430_VC_IVA_VPACK_EN_MASK BITFIELD(30, 30) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_IVA_VPACK_ST_SHIFT (1 << 30) +#define OMAP4430_VC_IVA_VPACK_ST_MASK BITFIELD(30, 30) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VC_MPU_VPACK_EN_SHIFT (1 << 6) +#define OMAP4430_VC_MPU_VPACK_EN_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VC_MPU_VPACK_ST_SHIFT (1 << 6) +#define OMAP4430_VC_MPU_VPACK_ST_MASK BITFIELD(6, 6) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_RAERR_EN_SHIFT (1 << 12) +#define OMAP4430_VC_RAERR_EN_MASK BITFIELD(12, 12) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_RAERR_ST_SHIFT (1 << 12) +#define OMAP4430_VC_RAERR_ST_MASK BITFIELD(12, 12) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_SAERR_EN_SHIFT (1 << 11) +#define OMAP4430_VC_SAERR_EN_MASK BITFIELD(11, 11) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_SAERR_ST_SHIFT (1 << 11) +#define OMAP4430_VC_SAERR_ST_MASK BITFIELD(11, 11) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VC_TOERR_EN_SHIFT (1 << 13) +#define OMAP4430_VC_TOERR_EN_MASK BITFIELD(13, 13) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VC_TOERR_ST_SHIFT (1 << 13) +#define OMAP4430_VC_TOERR_ST_MASK BITFIELD(13, 13) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP4430_VDDMAX_SHIFT (1 << 24) +#define OMAP4430_VDDMAX_MASK BITFIELD(24, 31) + +/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */ +#define OMAP4430_VDDMIN_SHIFT (1 << 16) +#define OMAP4430_VDDMIN_MASK BITFIELD(16, 23) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT (1 << 12) +#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK BITFIELD(12, 12) + +/* Used by PRM_RSTST */ +#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT (1 << 8) +#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK BITFIELD(8, 8) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT (1 << 14) +#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK BITFIELD(14, 14) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_IVA_PRESENCE_SHIFT (1 << 9) +#define OMAP4430_VDD_IVA_PRESENCE_MASK BITFIELD(9, 9) + +/* Used by PRM_RSTST */ +#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT (1 << 7) +#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK BITFIELD(7, 7) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT (1 << 13) +#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK BITFIELD(13, 13) + +/* Used by PRM_VOLTCTRL */ +#define OMAP4430_VDD_MPU_PRESENCE_SHIFT (1 << 8) +#define OMAP4430_VDD_MPU_PRESENCE_MASK BITFIELD(8, 8) + +/* Used by PRM_RSTST */ +#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT (1 << 6) +#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK BITFIELD(6, 6) + +/* Used by PRM_VC_VAL_SMPS_RA_VOL */ +#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT (1 << 0) +#define OMAP4430_VOLRA_VDD_CORE_L_MASK BITFIELD(0, 7) + +/* Used by PRM_VC_VAL_SMPS_RA_VOL */ +#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT (1 << 8) +#define OMAP4430_VOLRA_VDD_IVA_L_MASK BITFIELD(8, 15) + +/* Used by PRM_VC_VAL_SMPS_RA_VOL */ +#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT (1 << 16) +#define OMAP4430_VOLRA_VDD_MPU_L_MASK BITFIELD(16, 23) + +/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */ +#define OMAP4430_VPENABLE_SHIFT (1 << 0) +#define OMAP4430_VPENABLE_MASK BITFIELD(0, 0) + +/* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */ +#define OMAP4430_VPINIDLE_SHIFT (1 << 0) +#define OMAP4430_VPINIDLE_MASK BITFIELD(0, 0) + +/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */ +#define OMAP4430_VPVOLTAGE_SHIFT (1 << 0) +#define OMAP4430_VPVOLTAGE_MASK BITFIELD(0, 7) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT (1 << 20) +#define OMAP4430_VP_CORE_EQVALUE_EN_MASK BITFIELD(20, 20) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT (1 << 20) +#define OMAP4430_VP_CORE_EQVALUE_ST_MASK BITFIELD(20, 20) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT (1 << 18) +#define OMAP4430_VP_CORE_MAXVDD_EN_MASK BITFIELD(18, 18) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT (1 << 18) +#define OMAP4430_VP_CORE_MAXVDD_ST_MASK BITFIELD(18, 18) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT (1 << 17) +#define OMAP4430_VP_CORE_MINVDD_EN_MASK BITFIELD(17, 17) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT (1 << 17) +#define OMAP4430_VP_CORE_MINVDD_ST_MASK BITFIELD(17, 17) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT (1 << 19) +#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK BITFIELD(19, 19) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT (1 << 19) +#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK BITFIELD(19, 19) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT (1 << 16) +#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK BITFIELD(16, 16) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT (1 << 16) +#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK BITFIELD(16, 16) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT (1 << 21) +#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK BITFIELD(21, 21) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT (1 << 21) +#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK BITFIELD(21, 21) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT (1 << 28) +#define OMAP4430_VP_IVA_EQVALUE_EN_MASK BITFIELD(28, 28) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT (1 << 28) +#define OMAP4430_VP_IVA_EQVALUE_ST_MASK BITFIELD(28, 28) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT (1 << 26) +#define OMAP4430_VP_IVA_MAXVDD_EN_MASK BITFIELD(26, 26) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT (1 << 26) +#define OMAP4430_VP_IVA_MAXVDD_ST_MASK BITFIELD(26, 26) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT (1 << 25) +#define OMAP4430_VP_IVA_MINVDD_EN_MASK BITFIELD(25, 25) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT (1 << 25) +#define OMAP4430_VP_IVA_MINVDD_ST_MASK BITFIELD(25, 25) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT (1 << 27) +#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK BITFIELD(27, 27) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT (1 << 27) +#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK BITFIELD(27, 27) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT (1 << 24) +#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK BITFIELD(24, 24) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT (1 << 24) +#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK BITFIELD(24, 24) + +/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */ +#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT (1 << 29) +#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK BITFIELD(29, 29) + +/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */ +#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT (1 << 29) +#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK BITFIELD(29, 29) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT (1 << 4) +#define OMAP4430_VP_MPU_EQVALUE_EN_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT (1 << 4) +#define OMAP4430_VP_MPU_EQVALUE_ST_MASK BITFIELD(4, 4) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT (1 << 2) +#define OMAP4430_VP_MPU_MAXVDD_EN_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT (1 << 2) +#define OMAP4430_VP_MPU_MAXVDD_ST_MASK BITFIELD(2, 2) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT (1 << 1) +#define OMAP4430_VP_MPU_MINVDD_EN_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT (1 << 1) +#define OMAP4430_VP_MPU_MINVDD_ST_MASK BITFIELD(1, 1) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT (1 << 3) +#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT (1 << 3) +#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK BITFIELD(3, 3) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT (1 << 0) +#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT (1 << 0) +#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK BITFIELD(0, 0) + +/* Used by PRM_IRQENABLE_MPU_2 */ +#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT (1 << 5) +#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK BITFIELD(5, 5) + +/* Used by PRM_IRQSTATUS_MPU_2 */ +#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT (1 << 5) +#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK BITFIELD(5, 5) + +/* Used by PRM_SRAM_COUNT */ +#define OMAP4430_VSETUPCNT_VALUE_SHIFT (1 << 8) +#define OMAP4430_VSETUPCNT_VALUE_MASK BITFIELD(8, 15) + +/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */ +#define OMAP4430_VSTEPMAX_SHIFT (1 << 0) +#define OMAP4430_VSTEPMAX_MASK BITFIELD(0, 7) + +/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */ +#define OMAP4430_VSTEPMIN_SHIFT (1 << 0) +#define OMAP4430_VSTEPMIN_MASK BITFIELD(0, 7) + +/* Used by PRM_MODEM_IF_CTRL */ +#define OMAP4430_WAKE_MODEM_SHIFT (1 << 0) +#define OMAP4430_WAKE_MODEM_MASK BITFIELD(0, 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DISPC_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_DMIC_WKDEP */ +#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_DMTIMER10_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER11_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER11_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER2_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER3_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER3_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER4_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER4_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_DMTIMER9_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_DMTIMER9_WKDEP */ +#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT (1 << 5) +#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK BITFIELD(5, 5) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT (1 << 4) +#define OMAP4430_WKUPDEP_DSI1_MPU_MASK BITFIELD(4, 4) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT (1 << 9) +#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK BITFIELD(9, 9) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT (1 << 8) +#define OMAP4430_WKUPDEP_DSI2_MPU_MASK BITFIELD(8, 8) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT (1 << 11) +#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK BITFIELD(11, 11) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT (1 << 10) +#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK BITFIELD(10, 10) + +/* Used by PM_WKUP_GPIO1_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_WKUP_GPIO1_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_GPIO1_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO2_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO3_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO3_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO4_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO4_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO5_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO5_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_GPIO6_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_GPIO6_WKDEP */ +#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT (1 << 19) +#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK BITFIELD(19, 19) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT (1 << 13) +#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK BITFIELD(13, 13) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT (1 << 12) +#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK BITFIELD(12, 12) + +/* Used by PM_DSS_DSS_WKDEP */ +#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT (1 << 14) +#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK BITFIELD(14, 14) + +/* Used by PM_L4PER_HECC1_WKDEP */ +#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_HECC1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_HECC2_WKDEP */ +#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_HECC2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C1_WKDEP */ +#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C2_WKDEP */ +#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C3_WKDEP */ +#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_I2C4_WKDEP */ +#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_I2C5_WKDEP */ +#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_I2C5_WKDEP */ +#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_KEYBOARD_WKDEP */ +#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCASP_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCASP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCASP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_ABE_MCBSP1_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_ABE_MCBSP2_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_ABE_MCBSP3_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCBSP4_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCBSP4_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCBSP4_WKDEP */ +#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCSPI1_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI2_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCSPI3_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI3_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MCSPI4_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MCSPI4_WKDEP */ +#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMC1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_MMC1_WKDEP */ +#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMC2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_MMC2_WKDEP */ +#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L3INIT_MMC6_WKDEP */ +#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_MMC6_WKDEP */ +#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMC6_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_MMC6_WKDEP */ +#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_MMCSD3_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MMCSD3_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MMCSD3_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MMCSD4_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MMCSD4_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MMCSD4_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_MMCSD5_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_MMCSD5_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_MMCSD5_WKDEP */ +#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_PCIESS_WKDEP */ +#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_PCIESS_WKDEP */ +#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_PDM_WKDEP */ +#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_WKUP_RTC_WKDEP */ +#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_RTC_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_SATA_WKDEP */ +#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SATA_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_SATA_WKDEP */ +#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_SATA_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_SLIMBUS_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT (1 << 7) +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK BITFIELD(7, 7) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT (1 << 6) +#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK BITFIELD(6, 6) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_SLIMBUS2_WKDEP */ +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ALWON_SR_CORE_WKDEP */ +#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_ALWON_SR_CORE_WKDEP */ +#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ALWON_SR_IVA_WKDEP */ +#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_ALWON_SR_IVA_WKDEP */ +#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ALWON_SR_MPU_WKDEP */ +#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_TIMER12_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_TIMER1_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER5_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER5_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_TIMER6_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER6_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_TIMER7_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER7_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_ABE_TIMER8_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_TIMER8_WKDEP */ +#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_UART1_WKDEP */ +#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART1_WKDEP */ +#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART1_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_UART2_WKDEP */ +#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART2_WKDEP */ +#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART2_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART3_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L4PER_UART3_WKDEP */ +#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT (1 << 2) +#define OMAP4430_WKUPDEP_UART3_TESLA_MASK BITFIELD(2, 2) + +/* Used by PM_L4PER_UART4_WKDEP */ +#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UART4_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L4PER_UART4_WKDEP */ +#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_UART4_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_L3INIT_UNIPRO1_WKDEP */ +#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_UNIPRO1_WKDEP */ +#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_HOST_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_HOST_WKDEP */ +#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_OTG_WKDEP */ +#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_OTG_WKDEP */ +#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_USB_TLL_WKDEP */ +#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_L3INIT_USB_TLL_WKDEP */ +#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_USIM_WKDEP */ +#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_USIM_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_WKUP_USIM_WKDEP */ +#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT (1 << 3) +#define OMAP4430_WKUPDEP_USIM_SDMA_MASK BITFIELD(3, 3) + +/* Used by PM_WKUP_WDT2_WKDEP */ +#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PM_WKUP_WDT2_WKDEP */ +#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_WDT2_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_ABE_WDT3_WKDEP */ +#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT (1 << 0) +#define OMAP4430_WKUPDEP_WDT3_MPU_MASK BITFIELD(0, 0) + +/* Used by PM_L3INIT_HSI_WKDEP */ +#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT (1 << 8) +#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK BITFIELD(8, 8) + +/* Used by PM_L3INIT_XHPI_WKDEP */ +#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT (1 << 1) +#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK BITFIELD(1, 1) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_WUCLK_CTRL_SHIFT (1 << 8) +#define OMAP4430_WUCLK_CTRL_MASK BITFIELD(8, 8) + +/* Used by PRM_IO_PMCTRL */ +#define OMAP4430_WUCLK_STATUS_SHIFT (1 << 9) +#define OMAP4430_WUCLK_STATUS_MASK BITFIELD(9, 9) +#endif diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h index a117f853ea39..ea050ce188a7 100644 --- a/arch/arm/mach-omap2/prm.h +++ b/arch/arm/mach-omap2/prm.h @@ -4,8 +4,8 @@ /* * OMAP2/3 Power/Reset Management (PRM) register definitions * - * Copyright (C) 2007 Texas Instruments, Inc. - * Copyright (C) 2007 Nokia Corporation + * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation * * Written by Paul Walmsley * @@ -22,6 +22,10 @@ OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg)) #define OMAP34XX_PRM_REGADDR(module, reg) \ OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg)) +#define OMAP44XX_PRM_REGADDR(module, reg) \ + OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg)) + +#include "prm44xx.h" /* * Architecture-specific global PRM registers diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h new file mode 100644 index 000000000000..89be97f0589d --- /dev/null +++ b/arch/arm/mach-omap2/prm44xx.h @@ -0,0 +1,411 @@ +/* + * OMAP44xx PRM instance offset macros + * + * Copyright (C) 2009 Texas Instruments, Inc. + * Copyright (C) 2009 Nokia Corporation + * + * Paul Walmsley (paul@pwsan.com) + * Rajendra Nayak (rnayak@ti.com) + * Benoit Cousson (b-cousson@ti.com) + * + * This file is automatically generated from the OMAP hardware databases. + * We respectfully ask that any modifications to this file be coordinated + * with the public linux-omap@vger.kernel.org mailing list and the + * authors above to ensure that the autogeneration scripts are kept + * up-to-date with the file contents. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_H +#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H + + +/* PRM */ + + +/* PRM.OCP_SOCKET_PRM register offsets */ +#define OMAP4430_REVISION_PRM OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000) +#define OMAP4430_PRM_IRQSTATUS_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010) +#define OMAP4430_PRM_IRQSTATUS_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014) +#define OMAP4430_PRM_IRQENABLE_MPU OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018) +#define OMAP4430_PRM_IRQENABLE_MPU_2 OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c) +#define OMAP4430_PRM_IRQSTATUS_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020) +#define OMAP4430_PRM_IRQENABLE_DUCATI OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028) +#define OMAP4430_PRM_IRQSTATUS_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030) +#define OMAP4430_PRM_IRQENABLE_TESLA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038) +#define OMAP4430_PRM_PRM_PROFILING_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040) + +/* PRM.CKGEN_PRM register offsets */ +#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000) +#define OMAP4430_CM_DPLL_SYS_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004) +#define OMAP4430_CM_L4_WKUP_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008) +#define OMAP4430_CM_ABE_PLL_REF_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c) +#define OMAP4430_CM_SYS_CLKSEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010) + +/* PRM.MPU_PRM register offsets */ +#define OMAP4430_PM_MPU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000) +#define OMAP4430_PM_MPU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004) +#define OMAP4430_RM_MPU_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014) +#define OMAP4430_RM_MPU_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024) + +/* PRM.TESLA_PRM register offsets */ +#define OMAP4430_PM_TESLA_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000) +#define OMAP4430_PM_TESLA_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004) +#define OMAP4430_RM_TESLA_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010) +#define OMAP4430_RM_TESLA_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014) +#define OMAP4430_RM_TESLA_TESLA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024) + +/* PRM.ABE_PRM register offsets */ +#define OMAP4430_PM_ABE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000) +#define OMAP4430_PM_ABE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004) +#define OMAP4430_RM_ABE_AESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c) +#define OMAP4430_PM_ABE_PDM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030) +#define OMAP4430_RM_ABE_PDM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034) +#define OMAP4430_PM_ABE_DMIC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038) +#define OMAP4430_RM_ABE_DMIC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c) +#define OMAP4430_PM_ABE_MCASP_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040) +#define OMAP4430_RM_ABE_MCASP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044) +#define OMAP4430_PM_ABE_MCBSP1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048) +#define OMAP4430_RM_ABE_MCBSP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c) +#define OMAP4430_PM_ABE_MCBSP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050) +#define OMAP4430_RM_ABE_MCBSP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054) +#define OMAP4430_PM_ABE_MCBSP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058) +#define OMAP4430_RM_ABE_MCBSP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c) +#define OMAP4430_PM_ABE_SLIMBUS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060) +#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064) +#define OMAP4430_PM_ABE_TIMER5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068) +#define OMAP4430_RM_ABE_TIMER5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c) +#define OMAP4430_PM_ABE_TIMER6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070) +#define OMAP4430_RM_ABE_TIMER6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074) +#define OMAP4430_PM_ABE_TIMER7_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078) +#define OMAP4430_RM_ABE_TIMER7_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c) +#define OMAP4430_PM_ABE_TIMER8_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080) +#define OMAP4430_RM_ABE_TIMER8_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084) +#define OMAP4430_PM_ABE_WDT3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088) +#define OMAP4430_RM_ABE_WDT3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c) + +/* PRM.ALWAYS_ON_PRM register offsets */ +#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024) +#define OMAP4430_PM_ALWON_SR_MPU_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028) +#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c) +#define OMAP4430_PM_ALWON_SR_IVA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030) +#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034) +#define OMAP4430_PM_ALWON_SR_CORE_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038) +#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c) + +/* PRM.CORE_PRM register offsets */ +#define OMAP4430_PM_CORE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000) +#define OMAP4430_PM_CORE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004) +#define OMAP4430_RM_L3_1_L3_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024) +#define OMAP4430_RM_L3_2_L3_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124) +#define OMAP4430_RM_L3_2_GPMC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c) +#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134) +#define OMAP4430_RM_DUCATI_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210) +#define OMAP4430_RM_DUCATI_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214) +#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224) +#define OMAP4430_RM_SDMA_SDMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324) +#define OMAP4430_RM_MEMIF_DMM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424) +#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c) +#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434) +#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c) +#define OMAP4430_RM_MEMIF_DLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444) +#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454) +#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c) +#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464) +#define OMAP4430_RM_D2D_SAD2D_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524) +#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c) +#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534) +#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624) +#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c) +#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634) +#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c) +#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724) +#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c) +#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744) + +/* PRM.IVAHD_PRM register offsets */ +#define OMAP4430_PM_IVAHD_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000) +#define OMAP4430_PM_IVAHD_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004) +#define OMAP4430_RM_IVAHD_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010) +#define OMAP4430_RM_IVAHD_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014) +#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024) +#define OMAP4430_RM_IVAHD_SL2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c) + +/* PRM.CAM_PRM register offsets */ +#define OMAP4430_PM_CAM_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000) +#define OMAP4430_PM_CAM_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004) +#define OMAP4430_RM_CAM_ISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024) +#define OMAP4430_RM_CAM_FDIF_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c) + +/* PRM.DSS_PRM register offsets */ +#define OMAP4430_PM_DSS_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000) +#define OMAP4430_PM_DSS_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004) +#define OMAP4430_PM_DSS_DSS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020) +#define OMAP4430_RM_DSS_DSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024) +#define OMAP4430_RM_DSS_DEISS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c) + +/* PRM.GFX_PRM register offsets */ +#define OMAP4430_PM_GFX_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000) +#define OMAP4430_PM_GFX_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004) +#define OMAP4430_RM_GFX_GFX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024) + +/* PRM.L3INIT_PRM register offsets */ +#define OMAP4430_PM_L3INIT_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000) +#define OMAP4430_PM_L3INIT_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004) +#define OMAP4430_PM_L3INIT_MMC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028) +#define OMAP4430_RM_L3INIT_MMC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c) +#define OMAP4430_PM_L3INIT_MMC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030) +#define OMAP4430_RM_L3INIT_MMC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034) +#define OMAP4430_PM_L3INIT_HSI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038) +#define OMAP4430_RM_L3INIT_HSI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c) +#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040) +#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044) +#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058) +#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c) +#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060) +#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064) +#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068) +#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c) +#define OMAP4430_RM_L3INIT_P1500_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c) +#define OMAP4430_RM_L3INIT_EMAC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084) +#define OMAP4430_PM_L3INIT_SATA_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088) +#define OMAP4430_RM_L3INIT_SATA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c) +#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094) +#define OMAP4430_PM_L3INIT_PCIESS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098) +#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c) +#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac) +#define OMAP4430_PM_L3INIT_XHPI_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0) +#define OMAP4430_RM_L3INIT_XHPI_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4) +#define OMAP4430_PM_L3INIT_MMC6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8) +#define OMAP4430_RM_L3INIT_MMC6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc) +#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0) +#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4) +#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4) + +/* PRM.L4PER_PRM register offsets */ +#define OMAP4430_PM_L4PER_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000) +#define OMAP4430_PM_L4PER_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004) +#define OMAP4430_RM_L4PER_ADC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024) +#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028) +#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c) +#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030) +#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034) +#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038) +#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c) +#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040) +#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044) +#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048) +#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c) +#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050) +#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054) +#define OMAP4430_RM_L4PER_ELM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c) +#define OMAP4430_PM_L4PER_GPIO2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060) +#define OMAP4430_RM_L4PER_GPIO2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064) +#define OMAP4430_PM_L4PER_GPIO3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068) +#define OMAP4430_RM_L4PER_GPIO3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c) +#define OMAP4430_PM_L4PER_GPIO4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070) +#define OMAP4430_RM_L4PER_GPIO4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074) +#define OMAP4430_PM_L4PER_GPIO5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078) +#define OMAP4430_RM_L4PER_GPIO5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c) +#define OMAP4430_PM_L4PER_GPIO6_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080) +#define OMAP4430_RM_L4PER_GPIO6_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084) +#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c) +#define OMAP4430_PM_L4PER_HECC1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090) +#define OMAP4430_RM_L4PER_HECC1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094) +#define OMAP4430_PM_L4PER_HECC2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098) +#define OMAP4430_RM_L4PER_HECC2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c) +#define OMAP4430_PM_L4PER_I2C1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0) +#define OMAP4430_RM_L4PER_I2C1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4) +#define OMAP4430_PM_L4PER_I2C2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8) +#define OMAP4430_RM_L4PER_I2C2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac) +#define OMAP4430_PM_L4PER_I2C3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0) +#define OMAP4430_RM_L4PER_I2C3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4) +#define OMAP4430_PM_L4PER_I2C4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8) +#define OMAP4430_RM_L4PER_I2C4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc) +#define OMAP4430_RM_L4PER_L4_PER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0) +#define OMAP4430_PM_L4PER_MCASP2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0) +#define OMAP4430_RM_L4PER_MCASP2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4) +#define OMAP4430_PM_L4PER_MCASP3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8) +#define OMAP4430_RM_L4PER_MCASP3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc) +#define OMAP4430_PM_L4PER_MCBSP4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0) +#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4) +#define OMAP4430_RM_L4PER_MGATE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec) +#define OMAP4430_PM_L4PER_MCSPI1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0) +#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4) +#define OMAP4430_PM_L4PER_MCSPI2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8) +#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc) +#define OMAP4430_PM_L4PER_MCSPI3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100) +#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104) +#define OMAP4430_PM_L4PER_MCSPI4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108) +#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c) +#define OMAP4430_PM_L4PER_MMCSD3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120) +#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124) +#define OMAP4430_PM_L4PER_MMCSD4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128) +#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c) +#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134) +#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138) +#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c) +#define OMAP4430_PM_L4PER_UART1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140) +#define OMAP4430_RM_L4PER_UART1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144) +#define OMAP4430_PM_L4PER_UART2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148) +#define OMAP4430_RM_L4PER_UART2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c) +#define OMAP4430_PM_L4PER_UART3_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150) +#define OMAP4430_RM_L4PER_UART3_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154) +#define OMAP4430_PM_L4PER_UART4_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158) +#define OMAP4430_RM_L4PER_UART4_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c) +#define OMAP4430_PM_L4PER_MMCSD5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160) +#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164) +#define OMAP4430_PM_L4PER_I2C5_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168) +#define OMAP4430_RM_L4PER_I2C5_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c) +#define OMAP4430_RM_L4SEC_AES1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4) +#define OMAP4430_RM_L4SEC_AES2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac) +#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4) +#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc) +#define OMAP4430_RM_L4SEC_RNG_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4) +#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc) +#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc) + +/* PRM.CEFUSE_PRM register offsets */ +#define OMAP4430_PM_CEFUSE_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000) +#define OMAP4430_PM_CEFUSE_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004) +#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024) + +/* PRM.WKUP_PRM register offsets */ +#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024) +#define OMAP4430_RM_WKUP_WDT1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c) +#define OMAP4430_PM_WKUP_WDT2_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030) +#define OMAP4430_RM_WKUP_WDT2_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034) +#define OMAP4430_PM_WKUP_GPIO1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038) +#define OMAP4430_RM_WKUP_GPIO1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c) +#define OMAP4430_PM_WKUP_TIMER1_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040) +#define OMAP4430_RM_WKUP_TIMER1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044) +#define OMAP4430_PM_WKUP_TIMER12_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048) +#define OMAP4430_RM_WKUP_TIMER12_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c) +#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054) +#define OMAP4430_PM_WKUP_USIM_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058) +#define OMAP4430_RM_WKUP_USIM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c) +#define OMAP4430_RM_WKUP_SARRAM_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064) +#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078) +#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c) +#define OMAP4430_PM_WKUP_RTC_WKDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080) +#define OMAP4430_RM_WKUP_RTC_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084) + +/* PRM.WKUP_CM register offsets */ +#define OMAP4430_CM_WKUP_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000) +#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020) +#define OMAP4430_CM_WKUP_WDT1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028) +#define OMAP4430_CM_WKUP_WDT2_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030) +#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038) +#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040) +#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048) +#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050) +#define OMAP4430_CM_WKUP_USIM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058) +#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060) +#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078) +#define OMAP4430_CM_WKUP_RTC_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080) +#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088) + +/* PRM.EMU_PRM register offsets */ +#define OMAP4430_PM_EMU_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000) +#define OMAP4430_PM_EMU_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004) +#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024) + +/* PRM.EMU_CM register offsets */ +#define OMAP4430_CM_EMU_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000) +#define OMAP4430_CM_EMU_DYNAMICDEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008) +#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020) + +/* PRM.DEVICE_PRM register offsets */ +#define OMAP4430_PRM_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000) +#define OMAP4430_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004) +#define OMAP4430_PRM_RSTTIME OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008) +#define OMAP4430_PRM_CLKREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c) +#define OMAP4430_PRM_VOLTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010) +#define OMAP4430_PRM_PWRREQCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014) +#define OMAP4430_PRM_PSCON_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018) +#define OMAP4430_PRM_IO_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c) +#define OMAP4430_PRM_IO_PMCTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020) +#define OMAP4430_PRM_VOLTSETUP_WARMRESET OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024) +#define OMAP4430_PRM_VOLTSETUP_CORE_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028) +#define OMAP4430_PRM_VOLTSETUP_MPU_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c) +#define OMAP4430_PRM_VOLTSETUP_IVA_OFF OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030) +#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034) +#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038) +#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c) +#define OMAP4430_PRM_VP_CORE_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040) +#define OMAP4430_PRM_VP_CORE_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044) +#define OMAP4430_PRM_VP_CORE_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048) +#define OMAP4430_PRM_VP_CORE_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c) +#define OMAP4430_PRM_VP_CORE_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050) +#define OMAP4430_PRM_VP_CORE_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054) +#define OMAP4430_PRM_VP_MPU_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058) +#define OMAP4430_PRM_VP_MPU_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c) +#define OMAP4430_PRM_VP_MPU_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060) +#define OMAP4430_PRM_VP_MPU_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064) +#define OMAP4430_PRM_VP_MPU_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068) +#define OMAP4430_PRM_VP_MPU_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c) +#define OMAP4430_PRM_VP_IVA_CONFIG OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070) +#define OMAP4430_PRM_VP_IVA_STATUS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074) +#define OMAP4430_PRM_VP_IVA_VLIMITTO OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078) +#define OMAP4430_PRM_VP_IVA_VOLTAGE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c) +#define OMAP4430_PRM_VP_IVA_VSTEPMAX OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080) +#define OMAP4430_PRM_VP_IVA_VSTEPMIN OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084) +#define OMAP4430_PRM_VC_SMPS_SA OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088) +#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c) +#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090) +#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094) +#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098) +#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c) +#define OMAP4430_PRM_VC_VAL_BYPASS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0) +#define OMAP4430_PRM_VC_CFG_CHANNEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4) +#define OMAP4430_PRM_VC_CFG_I2C_MODE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8) +#define OMAP4430_PRM_VC_CFG_I2C_CLK OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac) +#define OMAP4430_PRM_SRAM_COUNT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0) +#define OMAP4430_PRM_SRAM_WKUP_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4) +#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8) +#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc) +#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0) +#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4) +#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8) +#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc) +#define OMAP4430_PRM_LDO_ABB_MPU_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0) +#define OMAP4430_PRM_LDO_ABB_MPU_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4) +#define OMAP4430_PRM_LDO_ABB_IVA_SETUP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8) +#define OMAP4430_PRM_LDO_ABB_IVA_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc) +#define OMAP4430_PRM_LDO_BANDGAP_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0) +#define OMAP4430_PRM_DEVICE_OFF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4) +#define OMAP4430_PRM_PHASE1_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8) +#define OMAP4430_PRM_PHASE2A_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec) +#define OMAP4430_PRM_PHASE2B_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0) +#define OMAP4430_PRM_MODEM_IF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4) + +/* CHIRON_PRCM */ + + +/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */ +#define OMAP4430_REVISION_PRCM OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000) + +/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */ +#define OMAP4430_CHIRON_PRCM_PRM_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000) + +/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */ +#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000) +#define OMAP4430_PM_PDA_CPU0_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004) +#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008) +#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c) +#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010) +#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014) +#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018) + +/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */ +#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000) +#define OMAP4430_PM_PDA_CPU1_PWRSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004) +#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008) +#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c) +#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010) +#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014) +#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL OMAP44XX_PRM_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018) +#endif diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 48207b018989..68f57bb67fc5 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -18,6 +18,9 @@ #include <plat/sdrc.h> #ifndef __ASSEMBLER__ + +#include <linux/io.h> + extern void __iomem *omap2_sdrc_base; extern void __iomem *omap2_sms_base; @@ -56,4 +59,20 @@ static inline u32 sms_read_reg(u16 reg) OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg)) #endif /* __ASSEMBLER__ */ +/* Minimum frequency that the SDRC DLL can lock at */ +#define MIN_SDRC_DLL_LOCK_FREQ 83000000 + +/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */ +#define SDRC_MPURATE_SCALE 8 + +/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */ +#define SDRC_MPURATE_BASE_SHIFT 9 + +/* + * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at + * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize + */ +#define SDRC_MPURATE_LOOPS 96 + + #endif diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 2e17b57f5b23..39b797bc14d6 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -33,6 +33,7 @@ #include "pm.h" #include "prm-regbits-34xx.h" +#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV 0x52 #define UART_OMAP_WER 0x17 /* Wake-up enable register */ #define DEFAULT_TIMEOUT (5 * HZ) @@ -572,6 +573,23 @@ static struct omap_uart_state omap_uart[] = { #endif }; +/* + * Override the default 8250 read handler: mem_serial_in() + * Empty RX fifo read causes an abort on omap3630 and omap4 + * This function makes sure that an empty rx fifo is not read on these silicons + * (OMAP1/2/3430 are not affected) + */ +static unsigned int serial_in_override(struct uart_port *up, int offset) +{ + if (UART_RX == offset) { + unsigned int lsr; + lsr = serial_read_reg(omap_uart[up->line].p, UART_LSR); + if (!(lsr & UART_LSR_DR)) + return -EPERM; + } + return serial_read_reg(omap_uart[up->line].p, offset); +} + void __init omap_serial_early_init(void) { int i; @@ -631,24 +649,64 @@ void __init omap_serial_early_init(void) } } -void __init omap_serial_init(void) +/** + * omap_serial_init_port() - initialize single serial port + * @port: serial port number (0-3) + * + * This function initialies serial driver for given @port only. + * Platforms can call this function instead of omap_serial_init() + * if they don't plan to use all available UARTs as serial ports. + * + * Don't mix calls to omap_serial_init_port() and omap_serial_init(), + * use only one of the two. + */ +void __init omap_serial_init_port(int port) { - int i; + struct omap_uart_state *uart; + struct platform_device *pdev; + struct device *dev; - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { - struct omap_uart_state *uart = &omap_uart[i]; - struct platform_device *pdev = &uart->pdev; - struct device *dev = &pdev->dev; + BUG_ON(port < 0); + BUG_ON(port >= ARRAY_SIZE(omap_uart)); - omap_uart_reset(uart); - omap_uart_idle_init(uart); + uart = &omap_uart[port]; + pdev = &uart->pdev; + dev = &pdev->dev; - if (WARN_ON(platform_device_register(pdev))) - continue; - if ((cpu_is_omap34xx() && uart->padconf) || - (uart->wk_en && uart->wk_mask)) { - device_init_wakeup(dev, true); - DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); - } + omap_uart_reset(uart); + omap_uart_idle_init(uart); + + if (WARN_ON(platform_device_register(pdev))) + return; + + if ((cpu_is_omap34xx() && uart->padconf) || + (uart->wk_en && uart->wk_mask)) { + device_init_wakeup(dev, true); + DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout); } + + /* omap44xx: Never read empty UART fifo + * omap3xxx: Never read empty UART fifo on UARTs + * with IP rev >=0x52 + */ + if (cpu_is_omap44xx()) + uart->p->serial_in = serial_in_override; + else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF) + >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) + uart->p->serial_in = serial_in_override; +} + +/** + * omap_serial_init() - intialize all supported serial ports + * + * Initializes all available UARTs as serial ports. Platforms + * can call this function when they want to have default behaviour + * for serial ports (e.g initialize them all as serial ports). + */ +void __init omap_serial_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(omap_uart); i++) + omap_serial_init_port(i); } diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S index 82aa4a3d160c..de99ba2a57ab 100644 --- a/arch/arm/mach-omap2/sram34xx.S +++ b/arch/arm/mach-omap2/sram34xx.S @@ -91,8 +91,19 @@ * new SDRC_ACTIM_CTRL_B_1 register contents * new SDRC_MR_1 register value * - * If the param SDRC_RFR_CTRL_1 is 0, the parameters - * are not programmed into the SDRC CS1 registers + * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into + * the SDRC CS1 registers + * + * NOTE: This code no longer attempts to program the SDRC AC timing and MR + * registers. This is because the code currently cannot ensure that all + * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the + * SDRAM when the registers are written. If the registers are changed while + * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC + * may enter an unpredictable state. In the future, the intent is to + * re-enable this code in cases where we can ensure that no initiators are + * touching the SDRAM. Until that time, users who know that their use case + * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING + * option. */ ENTRY(omap3_sram_configure_core_dpll) stmfd sp!, {r1-r12, lr} @ store regs to stack @@ -219,6 +230,7 @@ configure_sdrc: ldr r12, omap_sdrc_rfr_ctrl_0_val @ fetch value from SRAM ldr r11, omap3_sdrc_rfr_ctrl_0 @ fetch addr from SRAM str r12, [r11] @ store +#ifdef CONFIG_OMAP3_SDRC_AC_TIMING ldr r12, omap_sdrc_actim_ctrl_a_0_val ldr r11, omap3_sdrc_actim_ctrl_a_0 str r12, [r11] @@ -228,11 +240,13 @@ configure_sdrc: ldr r12, omap_sdrc_mr_0_val ldr r11, omap3_sdrc_mr_0 str r12, [r11] +#endif ldr r12, omap_sdrc_rfr_ctrl_1_val cmp r12, #0 @ if SDRC_RFR_CTRL_1 is 0, beq skip_cs1_prog @ do not program cs1 params ldr r11, omap3_sdrc_rfr_ctrl_1 str r12, [r11] +#ifdef CONFIG_OMAP3_SDRC_AC_TIMING ldr r12, omap_sdrc_actim_ctrl_a_1_val ldr r11, omap3_sdrc_actim_ctrl_a_1 str r12, [r11] @@ -242,6 +256,7 @@ configure_sdrc: ldr r12, omap_sdrc_mr_1_val ldr r11, omap3_sdrc_mr_1 str r12, [r11] +#endif skip_cs1_prog: ldr r12, [r11] @ posted-write barrier for SDRC bx lr diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c index e448abd5ec5d..f1df873d59db 100644 --- a/arch/arm/mach-omap2/usb-ehci.c +++ b/arch/arm/mach-omap2/usb-ehci.c @@ -27,6 +27,8 @@ #include <mach/irqs.h> #include <plat/usb.h> +#include "mux.h" + #if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE) static struct resource ehci_resources[] = { @@ -72,32 +74,44 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) { switch (port_mode[0]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(Y9_3430_USB1HS_PHY_STP); - omap_cfg_reg(Y8_3430_USB1HS_PHY_CLK); - omap_cfg_reg(AA14_3430_USB1HS_PHY_DIR); - omap_cfg_reg(AA11_3430_USB1HS_PHY_NXT); - omap_cfg_reg(W13_3430_USB1HS_PHY_DATA0); - omap_cfg_reg(W12_3430_USB1HS_PHY_DATA1); - omap_cfg_reg(W11_3430_USB1HS_PHY_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_PHY_DATA3); - omap_cfg_reg(W9_3430_USB1HS_PHY_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_PHY_DATA5); - omap_cfg_reg(W8_3430_USB1HS_PHY_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_PHY_DATA7); + omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(Y9_3430_USB1HS_TLL_STP); - omap_cfg_reg(Y8_3430_USB1HS_TLL_CLK); - omap_cfg_reg(AA14_3430_USB1HS_TLL_DIR); - omap_cfg_reg(AA11_3430_USB1HS_TLL_NXT); - omap_cfg_reg(W13_3430_USB1HS_TLL_DATA0); - omap_cfg_reg(W12_3430_USB1HS_TLL_DATA1); - omap_cfg_reg(W11_3430_USB1HS_TLL_DATA2); - omap_cfg_reg(Y11_3430_USB1HS_TLL_DATA3); - omap_cfg_reg(W9_3430_USB1HS_TLL_DATA4); - omap_cfg_reg(Y12_3430_USB1HS_TLL_DATA5); - omap_cfg_reg(W8_3430_USB1HS_TLL_DATA6); - omap_cfg_reg(Y13_3430_USB1HS_TLL_DATA7); + omap_mux_init_signal("hsusb1_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb1_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb1_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -107,32 +121,52 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) switch (port_mode[1]) { case EHCI_HCD_OMAP_MODE_PHY: - omap_cfg_reg(AA10_3430_USB2HS_PHY_STP); - omap_cfg_reg(AA8_3430_USB2HS_PHY_CLK); - omap_cfg_reg(AA9_3430_USB2HS_PHY_DIR); - omap_cfg_reg(AB11_3430_USB2HS_PHY_NXT); - omap_cfg_reg(AB10_3430_USB2HS_PHY_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_PHY_DATA1); - omap_cfg_reg(W3_3430_USB2HS_PHY_DATA2); - omap_cfg_reg(T4_3430_USB2HS_PHY_DATA3); - omap_cfg_reg(T3_3430_USB2HS_PHY_DATA4); - omap_cfg_reg(R3_3430_USB2HS_PHY_DATA5); - omap_cfg_reg(R4_3430_USB2HS_PHY_DATA6); - omap_cfg_reg(T2_3430_USB2HS_PHY_DATA7); + omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT); + omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AA10_3430_USB2HS_TLL_STP); - omap_cfg_reg(AA8_3430_USB2HS_TLL_CLK); - omap_cfg_reg(AA9_3430_USB2HS_TLL_DIR); - omap_cfg_reg(AB11_3430_USB2HS_TLL_NXT); - omap_cfg_reg(AB10_3430_USB2HS_TLL_DATA0); - omap_cfg_reg(AB9_3430_USB2HS_TLL_DATA1); - omap_cfg_reg(W3_3430_USB2HS_TLL_DATA2); - omap_cfg_reg(T4_3430_USB2HS_TLL_DATA3); - omap_cfg_reg(T3_3430_USB2HS_TLL_DATA4); - omap_cfg_reg(R3_3430_USB2HS_TLL_DATA5); - omap_cfg_reg(R4_3430_USB2HS_TLL_DATA6); - omap_cfg_reg(T2_3430_USB2HS_TLL_DATA7); + omap_mux_init_signal("hsusb2_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb2_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb2_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ @@ -145,18 +179,30 @@ static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode) printk(KERN_WARNING "Port3 can't be used in PHY mode\n"); break; case EHCI_HCD_OMAP_MODE_TLL: - omap_cfg_reg(AB3_3430_USB3HS_TLL_STP); - omap_cfg_reg(AA6_3430_USB3HS_TLL_CLK); - omap_cfg_reg(AA3_3430_USB3HS_TLL_DIR); - omap_cfg_reg(Y3_3430_USB3HS_TLL_NXT); - omap_cfg_reg(AA5_3430_USB3HS_TLL_DATA0); - omap_cfg_reg(Y4_3430_USB3HS_TLL_DATA1); - omap_cfg_reg(Y5_3430_USB3HS_TLL_DATA2); - omap_cfg_reg(W5_3430_USB3HS_TLL_DATA3); - omap_cfg_reg(AB12_3430_USB3HS_TLL_DATA4); - omap_cfg_reg(AB13_3430_USB3HS_TLL_DATA5); - omap_cfg_reg(AA13_3430_USB3HS_TLL_DATA6); - omap_cfg_reg(AA12_3430_USB3HS_TLL_DATA7); + omap_mux_init_signal("hsusb3_tll_stp", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hsusb3_tll_clk", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_dir", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_nxt", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data0", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data1", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data2", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data3", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data4", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data5", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data6", + OMAP_PIN_INPUT_PULLDOWN); + omap_mux_init_signal("hsusb3_tll_data7", + OMAP_PIN_INPUT_PULLDOWN); break; case EHCI_HCD_OMAP_MODE_UNKNOWN: /* FALLTHROUGH */ diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index f348ddfb0492..e2ea04a4c8a1 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -27,6 +27,7 @@ config ARCH_OMAP4 bool "TI OMAP4" select CPU_V7 select ARM_GIC + select COMMON_CLKDEV endchoice @@ -42,28 +43,6 @@ config OMAP_DEBUG_LEDS depends on OMAP_DEBUG_DEVICES default y if LEDS || LEDS_OMAP_DEBUG -config OMAP_DEBUG_POWERDOMAIN - bool "Emit debug messages from powerdomain layer" - depends on ARCH_OMAP2 || ARCH_OMAP3 - help - Say Y here if you want to compile in powerdomain layer - debugging messages for OMAP2/3. These messages can - provide more detail as to why some powerdomain calls - may be failing, and will also emit a descriptive message - for every powerdomain register write. However, the - extra detail costs some memory. - -config OMAP_DEBUG_CLOCKDOMAIN - bool "Emit debug messages from clockdomain layer" - depends on ARCH_OMAP2 || ARCH_OMAP3 - help - Say Y here if you want to compile in clockdomain layer - debugging messages for OMAP2/3. These messages can - provide more detail as to why some clockdomain calls - may be failing, and will also emit a descriptive message - for every clockdomain register write. However, the - extra detail costs some memory. - config OMAP_RESET_CLOCKS bool "Reset unused clocks during boot" depends on ARCH_OMAP @@ -78,28 +57,28 @@ config OMAP_RESET_CLOCKS config OMAP_MUX bool "OMAP multiplexing support" - depends on ARCH_OMAP + depends on ARCH_OMAP default y - help - Pin multiplexing support for OMAP boards. If your bootloader - sets the multiplexing correctly, say N. Otherwise, or if unsure, - say Y. + help + Pin multiplexing support for OMAP boards. If your bootloader + sets the multiplexing correctly, say N. Otherwise, or if unsure, + say Y. config OMAP_MUX_DEBUG bool "Multiplexing debug output" - depends on OMAP_MUX - help - Makes the multiplexing functions print out a lot of debug info. - This is useful if you want to find out the correct values of the - multiplexing registers. + depends on OMAP_MUX + help + Makes the multiplexing functions print out a lot of debug info. + This is useful if you want to find out the correct values of the + multiplexing registers. config OMAP_MUX_WARNINGS bool "Warn about pins the bootloader didn't set up" - depends on OMAP_MUX - default y - help + depends on OMAP_MUX + default y + help Choose Y here to warn whenever driver initialization logic needs - to change the pin multiplexing setup. When there are no warnings + to change the pin multiplexing setup. When there are no warnings printed, it's safe to deselect OMAP_MUX for your product. config OMAP_MCBSP @@ -125,7 +104,7 @@ config OMAP_IOMMU_DEBUG tristate choice - prompt "System timer" + prompt "System timer" default OMAP_MPU_TIMER config OMAP_MPU_TIMER @@ -148,11 +127,11 @@ config OMAP_32K_TIMER endchoice config OMAP_32K_TIMER_HZ - int "Kernel internal timer frequency for 32KHz timer" - range 32 1024 - depends on OMAP_32K_TIMER - default "128" - help + int "Kernel internal timer frequency for 32KHz timer" + range 32 1024 + depends on OMAP_32K_TIMER + default "128" + help Kernel internal timer frequency should be a divisor of 32768, such as 64 or 128. diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 681bfc37ebb2..89cafc937249 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -40,36 +40,10 @@ static struct clk_functions *arch_clock; * clock framework is not up , it is defined here to avoid rework in * every driver. Also dummy prcm reset function is added */ -/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */ -#if defined(CONFIG_ARCH_OMAP4) -struct clk *clk_get(struct device *dev, const char *id) -{ - return NULL; -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - -void omap2_clk_prepare_for_reboot(void) -{ -} -EXPORT_SYMBOL(omap2_clk_prepare_for_reboot); - -void omap_prcm_arch_reset(char mode) -{ -} -EXPORT_SYMBOL(omap_prcm_arch_reset); -#endif int clk_enable(struct clk *clk) { unsigned long flags; int ret = 0; - if (cpu_is_omap44xx()) - /* OMAP4 clk framework not supported yet */ - return 0; if (clk == NULL || IS_ERR(clk)) return -EINVAL; diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index cc050b3313bd..bf1eaf3a27d4 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -280,16 +280,18 @@ void __init omap2_set_globals_343x(void) #if defined(CONFIG_ARCH_OMAP4) static struct omap_globals omap4_globals = { .class = OMAP443X_CLASS, - .tap = OMAP2_L4_IO_ADDRESS(0x4830a000), + .tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE), .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE), .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE), .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE), + .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE), }; void __init omap2_set_globals_443x(void) { omap2_set_globals_tap(&omap4_globals); omap2_set_globals_control(&omap4_globals); + omap2_set_globals_prcm(&omap4_globals); } #endif diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c index 09c1107637f6..923c9621096b 100644 --- a/arch/arm/plat-omap/debug-devices.c +++ b/arch/arm/plat-omap/debug-devices.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/smc91x.h> #include <mach/hardware.h> @@ -24,6 +25,12 @@ * platforms include H2, H3, H4, and Perseus2. */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + static struct resource smc91x_resources[] = { [0] = { .flags = IORESOURCE_MEM, @@ -36,6 +43,9 @@ static struct resource smc91x_resources[] = { static struct platform_device smc91x_device = { .name = "smc91x", .id = -1, + .dev = { + .platform_data = &smc91x_info, + }, .num_resources = ARRAY_SIZE(smc91x_resources), .resource = smc91x_resources, }; diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index f86617869b38..30b5db73017a 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -242,6 +242,39 @@ fail: /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) + +#ifdef CONFIG_ARCH_OMAP24XX +#define OMAP_RNG_BASE 0x480A0000 +#else +#define OMAP_RNG_BASE 0xfffe5000 +#endif + +static struct resource rng_resources[] = { + { + .start = OMAP_RNG_BASE, + .end = OMAP_RNG_BASE + 0x4f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device omap_rng_device = { + .name = "omap_rng", + .id = -1, + .num_resources = ARRAY_SIZE(rng_resources), + .resource = rng_resources, +}; + +static void omap_init_rng(void) +{ + (void) platform_device_register(&omap_rng_device); +} +#else +static inline void omap_init_rng(void) {} +#endif + +/*-------------------------------------------------------------------------*/ + /* Numbering for the SPI-capable controllers when used for SPI: * spi = 1 * uwire = 2 @@ -324,39 +357,6 @@ static void omap_init_wdt(void) static inline void omap_init_wdt(void) {} #endif -/*-------------------------------------------------------------------------*/ - -#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE) - -#ifdef CONFIG_ARCH_OMAP24XX -#define OMAP_RNG_BASE 0x480A0000 -#else -#define OMAP_RNG_BASE 0xfffe5000 -#endif - -static struct resource rng_resources[] = { - { - .start = OMAP_RNG_BASE, - .end = OMAP_RNG_BASE + 0x4f, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device omap_rng_device = { - .name = "omap_rng", - .id = -1, - .num_resources = ARRAY_SIZE(rng_resources), - .resource = rng_resources, -}; - -static void omap_init_rng(void) -{ - (void) platform_device_register(&omap_rng_device); -} -#else -static inline void omap_init_rng(void) {} -#endif - /* * This gets called after board-specific INIT_MACHINE, and initializes most * on-chip peripherals accessible on this board (except for few like USB): @@ -384,9 +384,9 @@ static int __init omap_init_devices(void) */ omap_init_dsp(); omap_init_kp(); + omap_init_rng(); omap_init_uwire(); omap_init_wdt(); - omap_init_rng(); return 0; } arch_initcall(omap_init_devices); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index d17375e06a1e..09d82b3c66ce 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -47,7 +47,6 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED }; #endif #define OMAP_DMA_ACTIVE 0x01 -#define OMAP_DMA_CCR_EN (1 << 7) #define OMAP2_DMA_CSR_CLEAR_MASK 0xffe #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec) @@ -1120,17 +1119,8 @@ int omap_dma_running(void) { int lch; - /* - * On OMAP1510, internal LCD controller will start the transfer - * when it gets enabled, so assume DMA running if LCD enabled. - */ - if (cpu_is_omap1510()) - if (omap_readw(0xfffec000 + 0x00) & (1 << 0)) - return 1; - - /* Check if LCD DMA is running */ - if (cpu_is_omap16xx()) - if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN) + if (cpu_class_is_omap1()) + if (omap_lcd_dma_running()) return 1; for (lch = 0; lch < dma_chan_count; lch++) @@ -1990,377 +1980,6 @@ static struct irqaction omap24xx_dma_irq; /*----------------------------------------------------------------------------*/ -static struct lcd_dma_info { - spinlock_t lock; - int reserved; - void (*callback)(u16 status, void *data); - void *cb_data; - - int active; - unsigned long addr, size; - int rotate, data_type, xres, yres; - int vxres; - int mirror; - int xscale, yscale; - int ext_ctrl; - int src_port; - int single_transfer; -} lcd_dma; - -void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type) -{ - lcd_dma.addr = addr; - lcd_dma.data_type = data_type; - lcd_dma.xres = fb_xres; - lcd_dma.yres = fb_yres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1); - -void omap_set_lcd_dma_src_port(int port) -{ - lcd_dma.src_port = port; -} - -void omap_set_lcd_dma_ext_controller(int external) -{ - lcd_dma.ext_ctrl = external; -} -EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller); - -void omap_set_lcd_dma_single_transfer(int single) -{ - lcd_dma.single_transfer = single; -} -EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer); - -void omap_set_lcd_dma_b1_rotation(int rotate) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n"); - BUG(); - return; - } - lcd_dma.rotate = rotate; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation); - -void omap_set_lcd_dma_b1_mirror(int mirror) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.mirror = mirror; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror); - -void omap_set_lcd_dma_b1_vxres(unsigned long vxres) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA virtual resulotion is not supported " - "in 1510 mode\n"); - BUG(); - } - lcd_dma.vxres = vxres; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres); - -void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale) -{ - if (omap_dma_in_1510_mode()) { - printk(KERN_ERR "DMA scale is not supported in 1510 mode\n"); - BUG(); - } - lcd_dma.xscale = xscale; - lcd_dma.yscale = yscale; -} -EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale); - -static void set_b1_regs(void) -{ - unsigned long top, bottom; - int es; - u16 w; - unsigned long en, fn; - long ei, fi; - unsigned long vxres; - unsigned int xscale, yscale; - - switch (lcd_dma.data_type) { - case OMAP_DMA_DATA_TYPE_S8: - es = 1; - break; - case OMAP_DMA_DATA_TYPE_S16: - es = 2; - break; - case OMAP_DMA_DATA_TYPE_S32: - es = 4; - break; - default: - BUG(); - return; - } - - vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres; - xscale = lcd_dma.xscale ? lcd_dma.xscale : 1; - yscale = lcd_dma.yscale ? lcd_dma.yscale : 1; - BUG_ON(vxres < lcd_dma.xres); - -#define PIXADDR(x, y) (lcd_dma.addr + \ - ((y) * vxres * yscale + (x) * xscale) * es) -#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1) - - switch (lcd_dma.rotate) { - case 0: - if (!lcd_dma.mirror) { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - /* 1510 DMA requires the bottom address to be 2 more - * than the actual last memory access location. */ - if (omap_dma_in_1510_mode() && - lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32) - bottom += 2; - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 90: - if (!lcd_dma.mirror) { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1); - } else { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(0, 1, 0, 0); - fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - case 180: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - bottom = PIXADDR(0, 0); - ei = PIXSTEP(1, 0, 0, 0); - fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0); - } else { - top = PIXADDR(0, lcd_dma.yres - 1); - bottom = PIXADDR(lcd_dma.xres - 1, 0); - ei = PIXSTEP(0, 0, 1, 0); - fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0); - } - en = lcd_dma.xres; - fn = lcd_dma.yres; - break; - case 270: - if (!lcd_dma.mirror) { - top = PIXADDR(lcd_dma.xres - 1, 0); - bottom = PIXADDR(0, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0); - } else { - top = PIXADDR(0, 0); - bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1); - ei = PIXSTEP(0, 0, 0, 1); - fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0); - } - en = lcd_dma.yres; - fn = lcd_dma.xres; - break; - default: - BUG(); - return; /* Suppress warning about uninitialized vars */ - } - - if (omap_dma_in_1510_mode()) { - omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U); - omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L); - omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U); - omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L); - - return; - } - - /* 1610 regs */ - omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U); - omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L); - omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U); - omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L); - - omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1); - omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1); - - w = omap_readw(OMAP1610_DMA_LCD_CSDP); - w &= ~0x03; - w |= lcd_dma.data_type; - omap_writew(w, OMAP1610_DMA_LCD_CSDP); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - /* Always set the source port as SDRAM for now*/ - w &= ~(0x03 << 6); - if (lcd_dma.callback != NULL) - w |= 1 << 1; /* Block interrupt enable */ - else - w &= ~(1 << 1); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - if (!(lcd_dma.rotate || lcd_dma.mirror || - lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale)) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* Set the double-indexed addressing mode */ - w |= (0x03 << 12); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1); - omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U); - omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L); -} - -static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id) -{ - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - if (unlikely(!(w & (1 << 3)))) { - printk(KERN_WARNING "Spurious LCD DMA IRQ\n"); - return IRQ_NONE; - } - /* Ack the IRQ */ - w |= (1 << 3); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - lcd_dma.active = 0; - if (lcd_dma.callback != NULL) - lcd_dma.callback(w, lcd_dma.cb_data); - - return IRQ_HANDLED; -} - -int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data) -{ - spin_lock_irq(&lcd_dma.lock); - if (lcd_dma.reserved) { - spin_unlock_irq(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA channel already reserved\n"); - BUG(); - return -EBUSY; - } - lcd_dma.reserved = 1; - spin_unlock_irq(&lcd_dma.lock); - lcd_dma.callback = callback; - lcd_dma.cb_data = data; - lcd_dma.active = 0; - lcd_dma.single_transfer = 0; - lcd_dma.rotate = 0; - lcd_dma.vxres = 0; - lcd_dma.mirror = 0; - lcd_dma.xscale = 0; - lcd_dma.yscale = 0; - lcd_dma.ext_ctrl = 0; - lcd_dma.src_port = 0; - - return 0; -} -EXPORT_SYMBOL(omap_request_lcd_dma); - -void omap_free_lcd_dma(void) -{ - spin_lock(&lcd_dma.lock); - if (!lcd_dma.reserved) { - spin_unlock(&lcd_dma.lock); - printk(KERN_ERR "LCD DMA is not reserved\n"); - BUG(); - return; - } - if (!enable_1510_mode) - omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1, - OMAP1610_DMA_LCD_CCR); - lcd_dma.reserved = 0; - spin_unlock(&lcd_dma.lock); -} -EXPORT_SYMBOL(omap_free_lcd_dma); - -void omap_enable_lcd_dma(void) -{ - u16 w; - - /* - * Set the Enable bit only if an external controller is - * connected. Otherwise the OMAP internal controller will - * start the transfer when it gets enabled. - */ - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w |= 1 << 8; - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - - lcd_dma.active = 1; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w |= 1 << 7; - omap_writew(w, OMAP1610_DMA_LCD_CCR); -} -EXPORT_SYMBOL(omap_enable_lcd_dma); - -void omap_setup_lcd_dma(void) -{ - BUG_ON(lcd_dma.active); - if (!enable_1510_mode) { - /* Set some reasonable defaults */ - omap_writew(0x5440, OMAP1610_DMA_LCD_CCR); - omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP); - omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL); - } - set_b1_regs(); - if (!enable_1510_mode) { - u16 w; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - /* - * If DMA was already active set the end_prog bit to have - * the programmed register set loaded into the active - * register set. - */ - w |= 1 << 11; /* End_prog */ - if (!lcd_dma.single_transfer) - w |= (3 << 8); /* Auto_init, repeat */ - omap_writew(w, OMAP1610_DMA_LCD_CCR); - } -} -EXPORT_SYMBOL(omap_setup_lcd_dma); - -void omap_stop_lcd_dma(void) -{ - u16 w; - - lcd_dma.active = 0; - if (enable_1510_mode || !lcd_dma.ext_ctrl) - return; - - w = omap_readw(OMAP1610_DMA_LCD_CCR); - w &= ~(1 << 7); - omap_writew(w, OMAP1610_DMA_LCD_CCR); - - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); -} -EXPORT_SYMBOL(omap_stop_lcd_dma); - void omap_dma_global_context_save(void) { omap_dma_global_context.dma_irqenable_l0 = @@ -2465,14 +2084,6 @@ static int __init omap_init_dma(void) dma_chan_count = 16; } else dma_chan_count = 9; - if (cpu_is_omap16xx()) { - u16 w; - - /* this would prevent OMAP sleep */ - w = omap_readw(OMAP1610_DMA_LCD_CTRL); - w &= ~(1 << 8); - omap_writew(w, OMAP1610_DMA_LCD_CTRL); - } } else if (cpu_class_is_omap2()) { u8 revision = dma_read(REVISION) & 0xff; printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n", @@ -2483,7 +2094,6 @@ static int __init omap_init_dma(void) return 0; } - spin_lock_init(&lcd_dma.lock); spin_lock_init(&dma_chan_lock); for (ch = 0; ch < dma_chan_count; ch++) { @@ -2548,22 +2158,6 @@ static int __init omap_init_dma(void) } } - - /* FIXME: Update LCD DMA to work on 24xx */ - if (cpu_class_is_omap1()) { - r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0, - "LCD DMA", NULL); - if (r != 0) { - int i; - - printk(KERN_ERR "unable to request IRQ for LCD DMA " - "(error %d)\n", r); - for (i = 0; i < dma_chan_count; i++) - free_irq(omap1_dma_irq[i], (void *) (i + 1)); - goto out_free; - } - } - return 0; out_free: diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index c08362dbb8ed..33fff4ef382d 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -80,47 +80,8 @@ static struct platform_device omap_i2c_devices[] = { #endif }; -#if defined(CONFIG_ARCH_OMAP24XX) -static const int omap24xx_pins[][2] = { - { M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA }, - { J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA }, -}; -#else -static const int omap24xx_pins[][2] = {}; -#endif -#if defined(CONFIG_ARCH_OMAP34XX) -static const int omap34xx_pins[][2] = { - { K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA}, - { AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA}, - { AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA}, -}; -#else -static const int omap34xx_pins[][2] = {}; -#endif - #define OMAP_I2C_CMDLINE_SETUP (BIT(31)) -static void __init omap_i2c_mux_pins(int bus) -{ - int scl, sda; - - if (cpu_class_is_omap1()) { - scl = I2C_SCL; - sda = I2C_SDA; - } else if (cpu_is_omap24xx()) { - scl = omap24xx_pins[bus][0]; - sda = omap24xx_pins[bus][1]; - } else if (cpu_is_omap34xx()) { - scl = omap34xx_pins[bus][0]; - sda = omap34xx_pins[bus][1]; - } else { - return; - } - - omap_cfg_reg(sda); - omap_cfg_reg(scl); -} - static int __init omap_i2c_nr_ports(void) { int ports = 0; @@ -156,7 +117,6 @@ static int __init omap_i2c_add_bus(int bus_id) res[1].start = irq; } - omap_i2c_mux_pins(bus_id - 1); return platform_device_register(pdev); } @@ -209,7 +169,7 @@ out: subsys_initcall(omap_register_i2c_bus_cmdline); /** - * omap_register_i2c_bus - register I2C bus with device descriptors + * omap_plat_register_i2c_bus - register I2C bus with device descriptors * @bus_id: bus id counting from number 1 * @clkrate: clock rate of the bus in kHz * @info: pointer into I2C device descriptor table or NULL @@ -217,7 +177,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline); * * Returns 0 on success or an error code. */ -int __init omap_register_i2c_bus(int bus_id, u32 clkrate, +int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate, struct i2c_board_info const *info, unsigned len) { diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index abb17b604f82..376ce18216ff 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -114,15 +114,6 @@ struct omap_pwm_led_platform_data { void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off); }; -/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */ -struct omap_gpio_switch_config { - char name[12]; - u16 gpio; - int flags:4; - int type:4; - int key_code:24; /* Linux key code */ -}; - struct omap_uart_config { /* Bit field of UARTs present; bit 0 --> UART1 */ unsigned int enabled_uarts; diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h new file mode 100644 index 000000000000..35b36caf5f91 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -0,0 +1,41 @@ +/* + * clkdev <-> OMAP integration + * + * Russell King <linux@arm.linux.org.uk> + * + */ + +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H + +#include <asm/clkdev.h> + +struct omap_clk { + u16 cpu; + struct clk_lookup lk; +}; + +#define CLK(dev, con, ck, cp) \ + { \ + .cpu = cp, \ + .lk = { \ + .dev_id = dev, \ + .con_id = con, \ + .clk = ck, \ + }, \ + } + + +#define CK_310 (1 << 0) +#define CK_7XX (1 << 1) +#define CK_1510 (1 << 2) +#define CK_16XX (1 << 3) +#define CK_243X (1 << 4) +#define CK_242X (1 << 5) +#define CK_343X (1 << 6) +#define CK_3430ES1 (1 << 7) +#define CK_3430ES2 (1 << 8) +#define CK_443X (1 << 9) + +#endif + diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 4b8b0d65cbf2..309b6d1dccdb 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -13,6 +13,8 @@ #ifndef __ARCH_ARM_OMAP_CLOCK_H #define __ARCH_ARM_OMAP_CLOCK_H +#include <linux/list.h> + struct module; struct clk; struct clockdomain; @@ -148,6 +150,8 @@ extern const struct clkops clkops_null; #define CONFIG_PARTICIPANT (1 << 10) /* Fundamental clock */ #define ENABLE_ON_INIT (1 << 11) /* Enable upon framework init */ #define INVERT_ENABLE (1 << 12) /* 0 enables, 1 disables */ +#define CLOCK_IN_OMAP4430 (1 << 13) +#define ALWAYS_ENABLED (1 << 14) /* bits 13-31 are currently free */ /* Clksel_rate flags */ @@ -156,6 +160,7 @@ extern const struct clkops clkops_null; #define RATE_IN_243X (1 << 2) #define RATE_IN_343X (1 << 3) /* rates common to all 343X */ #define RATE_IN_3430ES2 (1 << 4) /* 3430ES2 rates only */ +#define RATE_IN_4430 (1 << 5) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 064f1730f43b..32c22272425d 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -27,7 +27,7 @@ #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H #define __ARCH_ARM_MACH_OMAP_COMMON_H -#include <linux/i2c.h> +#include <plat/i2c.h> struct sys_timer; @@ -36,18 +36,6 @@ extern void __iomem *gic_cpu_base_addr; extern void omap_map_common_io(void); extern struct sys_timer omap_timer; -#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) -extern int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len); -#else -static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) -{ - return 0; -} -#endif /* IO bases for various OMAP processors */ struct omap_globals { @@ -58,6 +46,7 @@ struct omap_globals { void __iomem *ctrl; /* System Control Module */ void __iomem *prm; /* Power and Reset Management */ void __iomem *cm; /* Clock Management */ + void __iomem *cm2; }; void omap2_set_globals_242x(void); @@ -71,4 +60,24 @@ void omap2_set_globals_sdrc(struct omap_globals *); void omap2_set_globals_control(struct omap_globals *); void omap2_set_globals_prcm(struct omap_globals *); +/** + * omap_test_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true + * @timeout: maximum number of microseconds in the timeout + * @index: loop index (integer) + * + * Loop waiting for @cond to become true or until at least @timeout + * microseconds have passed. To use, define some integer @index in the + * calling code. After running, if @index == @timeout, then the loop has + * timed out. + */ +#define omap_test_timeout(cond, timeout, index) \ +({ \ + for (index = 0; index < timeout; index++) { \ + if (cond) \ + break; \ + udelay(1); \ + } \ +}) + #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */ diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 2e1789001dfe..9a028bdebb06 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -176,11 +176,13 @@ IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) IS_OMAP_CLASS(24xx, 0x24) IS_OMAP_CLASS(34xx, 0x34) +IS_OMAP_CLASS(44xx, 0x44) IS_OMAP_SUBCLASS(242x, 0x242) IS_OMAP_SUBCLASS(243x, 0x243) IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) +IS_OMAP_SUBCLASS(443x, 0x443) #define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 @@ -393,11 +395,11 @@ IS_OMAP_TYPE(3517, 0x3517) (!omap3_has_iva()) && \ (!omap3_has_sgx())) # define cpu_is_omap3515() (cpu_is_omap3430() && \ - (omap3_has_iva()) && \ - (!omap3_has_sgx())) + (!omap3_has_iva()) && \ + (omap3_has_sgx())) # define cpu_is_omap3525() (cpu_is_omap3430() && \ - (omap3_has_sgx()) && \ - (!omap3_has_iva())) + (!omap3_has_sgx()) && \ + (omap3_has_iva())) # define cpu_is_omap3530() (cpu_is_omap3430()) # define cpu_is_omap3505() is_omap3505() # define cpu_is_omap3517() is_omap3517() @@ -408,8 +410,8 @@ IS_OMAP_TYPE(3517, 0x3517) # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x -# define cpu_is_omap44xx() 1 -# define cpu_is_omap443x() 1 +# define cpu_is_omap44xx() is_omap44xx() +# define cpu_is_omap443x() is_omap443x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -436,14 +438,15 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_0 0x36300034 #define OMAP35XX_CLASS 0x35000034 -#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 12)) -#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 12)) -#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 12)) -#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 12)) -#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 12)) -#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 12)) - -#define OMAP443X_CLASS 0x44300034 +#define OMAP3503_REV(v) (OMAP35XX_CLASS | (0x3503 << 16) | (v << 8)) +#define OMAP3515_REV(v) (OMAP35XX_CLASS | (0x3515 << 16) | (v << 8)) +#define OMAP3525_REV(v) (OMAP35XX_CLASS | (0x3525 << 16) | (v << 8)) +#define OMAP3530_REV(v) (OMAP35XX_CLASS | (0x3530 << 16) | (v << 8)) +#define OMAP3505_REV(v) (OMAP35XX_CLASS | (0x3505 << 16) | (v << 8)) +#define OMAP3517_REV(v) (OMAP35XX_CLASS | (0x3517 << 16) | (v << 8)) + +#define OMAP443X_CLASS 0x44300044 +#define OMAP4430_REV_ES1_0 0x44300044 /* * omap_chip bits diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index 1c017b29b7e9..4ede9e17a0be 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -401,33 +401,6 @@ /*----------------------------------------------------------------------------*/ -/* Hardware registers for LCD DMA */ -#define OMAP1510_DMA_LCD_BASE (0xfffedb00) -#define OMAP1510_DMA_LCD_CTRL (OMAP1510_DMA_LCD_BASE + 0x00) -#define OMAP1510_DMA_LCD_TOP_F1_L (OMAP1510_DMA_LCD_BASE + 0x02) -#define OMAP1510_DMA_LCD_TOP_F1_U (OMAP1510_DMA_LCD_BASE + 0x04) -#define OMAP1510_DMA_LCD_BOT_F1_L (OMAP1510_DMA_LCD_BASE + 0x06) -#define OMAP1510_DMA_LCD_BOT_F1_U (OMAP1510_DMA_LCD_BASE + 0x08) - -#define OMAP1610_DMA_LCD_BASE (0xfffee300) -#define OMAP1610_DMA_LCD_CSDP (OMAP1610_DMA_LCD_BASE + 0xc0) -#define OMAP1610_DMA_LCD_CCR (OMAP1610_DMA_LCD_BASE + 0xc2) -#define OMAP1610_DMA_LCD_CTRL (OMAP1610_DMA_LCD_BASE + 0xc4) -#define OMAP1610_DMA_LCD_TOP_B1_L (OMAP1610_DMA_LCD_BASE + 0xc8) -#define OMAP1610_DMA_LCD_TOP_B1_U (OMAP1610_DMA_LCD_BASE + 0xca) -#define OMAP1610_DMA_LCD_BOT_B1_L (OMAP1610_DMA_LCD_BASE + 0xcc) -#define OMAP1610_DMA_LCD_BOT_B1_U (OMAP1610_DMA_LCD_BASE + 0xce) -#define OMAP1610_DMA_LCD_TOP_B2_L (OMAP1610_DMA_LCD_BASE + 0xd0) -#define OMAP1610_DMA_LCD_TOP_B2_U (OMAP1610_DMA_LCD_BASE + 0xd2) -#define OMAP1610_DMA_LCD_BOT_B2_L (OMAP1610_DMA_LCD_BASE + 0xd4) -#define OMAP1610_DMA_LCD_BOT_B2_U (OMAP1610_DMA_LCD_BASE + 0xd6) -#define OMAP1610_DMA_LCD_SRC_EI_B1 (OMAP1610_DMA_LCD_BASE + 0xd8) -#define OMAP1610_DMA_LCD_SRC_FI_B1_L (OMAP1610_DMA_LCD_BASE + 0xda) -#define OMAP1610_DMA_LCD_SRC_EN_B1 (OMAP1610_DMA_LCD_BASE + 0xe0) -#define OMAP1610_DMA_LCD_SRC_FN_B1 (OMAP1610_DMA_LCD_BASE + 0xe4) -#define OMAP1610_DMA_LCD_LCH_CTRL (OMAP1610_DMA_LCD_BASE + 0xea) -#define OMAP1610_DMA_LCD_SRC_FI_B1_U (OMAP1610_DMA_LCD_BASE + 0xf4) - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) @@ -441,6 +414,8 @@ #define OMAP2_DMA_SUPERVISOR_ERR_IRQ (1 << 10) #define OMAP2_DMA_MISALIGNED_ERR_IRQ (1 << 11) +#define OMAP_DMA_CCR_EN (1 << 7) + #define OMAP_DMA_DATA_TYPE_S8 0x00 #define OMAP_DMA_DATA_TYPE_S16 0x01 #define OMAP_DMA_DATA_TYPE_S32 0x02 @@ -503,14 +478,6 @@ #define DMA_CH_PRIO_HIGH 0x1 #define DMA_CH_PRIO_LOW 0x0 /* Def */ -/* LCD DMA block numbers */ -enum { - OMAP_LCD_DMA_B1_TOP, - OMAP_LCD_DMA_B1_BOTTOM, - OMAP_LCD_DMA_B2_TOP, - OMAP_LCD_DMA_B2_BOTTOM -}; - enum omap_dma_burst_mode { OMAP_DMA_DATA_BURST_DIS = 0, OMAP_DMA_DATA_BURST_4, @@ -661,20 +628,13 @@ extern int omap_modify_dma_chain_params(int chain_id, extern int omap_dma_chain_status(int chain_id); #endif -/* LCD DMA functions */ -extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data), - void *data); -extern void omap_free_lcd_dma(void); -extern void omap_setup_lcd_dma(void); -extern void omap_enable_lcd_dma(void); -extern void omap_stop_lcd_dma(void); -extern void omap_set_lcd_dma_ext_controller(int external); -extern void omap_set_lcd_dma_single_transfer(int single); -extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres, - int data_type); -extern void omap_set_lcd_dma_b1_rotation(int rotate); -extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres); -extern void omap_set_lcd_dma_b1_mirror(int mirror); -extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale); +#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP) +#include <mach/lcd_dma.h> +#else +static inline int omap_lcd_dma_running(void) +{ + return 0; +} +#endif #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h index 696e0ca051b7..e081338e0b23 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/plat-omap/include/plat/gpmc.h @@ -45,7 +45,7 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(1) +#define GPMC_CONFIG1_DEVICETYPE_NAND GPMC_CONFIG1_DEVICETYPE(2) #define GPMC_CONFIG1_MUXADDDATA (1 << 9) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h new file mode 100644 index 000000000000..585d9ca68b97 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -0,0 +1,39 @@ +/* + * Helper module for board specific I2C bus registration + * + * Copyright (C) 2009 Nokia Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/i2c.h> + +#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) +extern int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); +#else +static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len) +{ + return 0; +} +#endif + +int omap_plat_register_i2c_bus(int bus_id, u32 clkrate, + struct i2c_board_info const *info, + unsigned len); diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h index ba77de601501..8f069cc80350 100644 --- a/arch/arm/plat-omap/include/plat/mux.h +++ b/arch/arm/plat-omap/include/plat/mux.h @@ -130,58 +130,11 @@ #define OMAP2_PULL_UP (1 << 4) #define OMAP2_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ -#define OMAP3_INPUT_EN (1 << 8) -#define OMAP3_OFF_EN (1 << 9) -#define OMAP3_OFFOUT_EN (1 << 10) -#define OMAP3_OFFOUT_VAL (1 << 11) -#define OMAP3_OFF_PULL_EN (1 << 12) -#define OMAP3_OFF_PULL_UP (1 << 13) -#define OMAP3_WAKEUP_EN (1 << 14) - -/* 34xx mux mode options for each pin. See TRM for options */ -#define OMAP34XX_MUX_MODE0 0 -#define OMAP34XX_MUX_MODE1 1 -#define OMAP34XX_MUX_MODE2 2 -#define OMAP34XX_MUX_MODE3 3 -#define OMAP34XX_MUX_MODE4 4 -#define OMAP34XX_MUX_MODE5 5 -#define OMAP34XX_MUX_MODE6 6 -#define OMAP34XX_MUX_MODE7 7 - -/* 34xx active pin states */ -#define OMAP34XX_PIN_OUTPUT 0 -#define OMAP34XX_PIN_INPUT OMAP3_INPUT_EN -#define OMAP34XX_PIN_INPUT_PULLUP (OMAP2_PULL_ENA | OMAP3_INPUT_EN \ - | OMAP2_PULL_UP) -#define OMAP34XX_PIN_INPUT_PULLDOWN (OMAP2_PULL_ENA | OMAP3_INPUT_EN) - -/* 34xx off mode states */ -#define OMAP34XX_PIN_OFF_NONE 0 -#define OMAP34XX_PIN_OFF_OUTPUT_HIGH (OMAP3_OFF_EN | OMAP3_OFFOUT_EN \ - | OMAP3_OFFOUT_VAL) -#define OMAP34XX_PIN_OFF_OUTPUT_LOW (OMAP3_OFF_EN | OMAP3_OFFOUT_EN) -#define OMAP34XX_PIN_OFF_INPUT_PULLUP (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \ - | OMAP3_OFF_PULL_UP) -#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN (OMAP3_OFF_EN | OMAP3_OFF_PULL_EN) -#define OMAP34XX_PIN_OFF_WAKEUPENABLE OMAP3_WAKEUP_EN - -#define MUX_CFG_34XX(desc, reg_offset, mux_value) { \ - .name = desc, \ - .debug = 0, \ - .mux_reg = reg_offset, \ - .mux_val = mux_value \ -}, - struct pin_config { char *name; const unsigned int mux_reg; unsigned char debug; -#if defined(CONFIG_ARCH_OMAP34XX) - u16 mux_val; /* Wake-up, off mode, pull, mux mode */ -#endif - #if defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX) const unsigned char mask_offset; const unsigned char mask; @@ -219,11 +172,17 @@ enum omap7xx_index { AA17_7XX_USB_DM, W16_7XX_USB_PU_EN, W17_7XX_USB_VBUSI, + W18_7XX_USB_DMCK_OUT, + W19_7XX_USB_DCRST, /* MMC */ MMC_7XX_CMD, MMC_7XX_CLK, MMC_7XX_DAT0, + + /* I2C */ + I2C_7XX_SCL, + I2C_7XX_SDA, }; enum omap1xxx_index { @@ -681,181 +640,6 @@ enum omap24xx_index { }; -enum omap34xx_index { - /* 34xx I2C */ - K21_34XX_I2C1_SCL, - J21_34XX_I2C1_SDA, - AF15_34XX_I2C2_SCL, - AE15_34XX_I2C2_SDA, - AF14_34XX_I2C3_SCL, - AG14_34XX_I2C3_SDA, - AD26_34XX_I2C4_SCL, - AE26_34XX_I2C4_SDA, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/ - Y8_3430_USB1HS_PHY_CLK, - Y9_3430_USB1HS_PHY_STP, - AA14_3430_USB1HS_PHY_DIR, - AA11_3430_USB1HS_PHY_NXT, - W13_3430_USB1HS_PHY_DATA0, - W12_3430_USB1HS_PHY_DATA1, - W11_3430_USB1HS_PHY_DATA2, - Y11_3430_USB1HS_PHY_DATA3, - W9_3430_USB1HS_PHY_DATA4, - Y12_3430_USB1HS_PHY_DATA5, - W8_3430_USB1HS_PHY_DATA6, - Y13_3430_USB1HS_PHY_DATA7, - - /* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/ - AA8_3430_USB2HS_PHY_CLK, - AA10_3430_USB2HS_PHY_STP, - AA9_3430_USB2HS_PHY_DIR, - AB11_3430_USB2HS_PHY_NXT, - AB10_3430_USB2HS_PHY_DATA0, - AB9_3430_USB2HS_PHY_DATA1, - W3_3430_USB2HS_PHY_DATA2, - T4_3430_USB2HS_PHY_DATA3, - T3_3430_USB2HS_PHY_DATA4, - R3_3430_USB2HS_PHY_DATA5, - R4_3430_USB2HS_PHY_DATA6, - T2_3430_USB2HS_PHY_DATA7, - - - /* TLL - HSUSB: 12-pin TLL Port 1*/ - Y8_3430_USB1HS_TLL_CLK, - Y9_3430_USB1HS_TLL_STP, - AA14_3430_USB1HS_TLL_DIR, - AA11_3430_USB1HS_TLL_NXT, - W13_3430_USB1HS_TLL_DATA0, - W12_3430_USB1HS_TLL_DATA1, - W11_3430_USB1HS_TLL_DATA2, - Y11_3430_USB1HS_TLL_DATA3, - W9_3430_USB1HS_TLL_DATA4, - Y12_3430_USB1HS_TLL_DATA5, - W8_3430_USB1HS_TLL_DATA6, - Y13_3430_USB1HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 2*/ - AA8_3430_USB2HS_TLL_CLK, - AA10_3430_USB2HS_TLL_STP, - AA9_3430_USB2HS_TLL_DIR, - AB11_3430_USB2HS_TLL_NXT, - AB10_3430_USB2HS_TLL_DATA0, - AB9_3430_USB2HS_TLL_DATA1, - W3_3430_USB2HS_TLL_DATA2, - T4_3430_USB2HS_TLL_DATA3, - T3_3430_USB2HS_TLL_DATA4, - R3_3430_USB2HS_TLL_DATA5, - R4_3430_USB2HS_TLL_DATA6, - T2_3430_USB2HS_TLL_DATA7, - - /* TLL - HSUSB: 12-pin TLL Port 3*/ - AA6_3430_USB3HS_TLL_CLK, - AB3_3430_USB3HS_TLL_STP, - AA3_3430_USB3HS_TLL_DIR, - Y3_3430_USB3HS_TLL_NXT, - AA5_3430_USB3HS_TLL_DATA0, - Y4_3430_USB3HS_TLL_DATA1, - Y5_3430_USB3HS_TLL_DATA2, - W5_3430_USB3HS_TLL_DATA3, - AB12_3430_USB3HS_TLL_DATA4, - AB13_3430_USB3HS_TLL_DATA5, - AA13_3430_USB3HS_TLL_DATA6, - AA12_3430_USB3HS_TLL_DATA7, - - /* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */ - AF10_3430_USB1FS_PHY_MM1_RXDP, - AG9_3430_USB1FS_PHY_MM1_RXDM, - W13_3430_USB1FS_PHY_MM1_RXRCV, - W12_3430_USB1FS_PHY_MM1_TXSE0, - W11_3430_USB1FS_PHY_MM1_TXDAT, - Y11_3430_USB1FS_PHY_MM1_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */ - AF7_3430_USB2FS_PHY_MM2_RXDP, - AH7_3430_USB2FS_PHY_MM2_RXDM, - AB10_3430_USB2FS_PHY_MM2_RXRCV, - AB9_3430_USB2FS_PHY_MM2_TXSE0, - W3_3430_USB2FS_PHY_MM2_TXDAT, - T4_3430_USB2FS_PHY_MM2_TXEN_N, - - /* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */ - AH3_3430_USB3FS_PHY_MM3_RXDP, - AE3_3430_USB3FS_PHY_MM3_RXDM, - AD1_3430_USB3FS_PHY_MM3_RXRCV, - AE1_3430_USB3FS_PHY_MM3_TXSE0, - AD2_3430_USB3FS_PHY_MM3_TXDAT, - AC1_3430_USB3FS_PHY_MM3_TXEN_N, - - /* 34xx GPIO - * - normally these are bidirectional, no internal pullup/pulldown - * - "_UP" suffix (GPIO3_UP) if internal pullup is configured - * - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown - * - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx) - */ - AF26_34XX_GPIO0, - AF22_34XX_GPIO9, - AG9_34XX_GPIO23, - AH8_34XX_GPIO29, - U8_34XX_GPIO54_OUT, - U8_34XX_GPIO54_DOWN, - L8_34XX_GPIO63, - G25_34XX_GPIO86_OUT, - AG4_34XX_GPIO134_OUT, - AF4_34XX_GPIO135_OUT, - AE4_34XX_GPIO136_OUT, - AF6_34XX_GPIO140_UP, - AE6_34XX_GPIO141, - AF5_34XX_GPIO142, - AE5_34XX_GPIO143, - H19_34XX_GPIO164_OUT, - J25_34XX_GPIO170, - - /* OMAP3 SDRC CKE signals to SDR/DDR ram chips */ - H16_34XX_SDRC_CKE0, - H17_34XX_SDRC_CKE1, - - /* MMC1 */ - N28_3430_MMC1_CLK, - M27_3430_MMC1_CMD, - N27_3430_MMC1_DAT0, - N26_3430_MMC1_DAT1, - N25_3430_MMC1_DAT2, - P28_3430_MMC1_DAT3, - P27_3430_MMC1_DAT4, - P26_3430_MMC1_DAT5, - R27_3430_MMC1_DAT6, - R25_3430_MMC1_DAT7, - - /* MMC2 */ - AE2_3430_MMC2_CLK, - AG5_3430_MMC2_CMD, - AH5_3430_MMC2_DAT0, - AH4_3430_MMC2_DAT1, - AG4_3430_MMC2_DAT2, - AF4_3430_MMC2_DAT3, - AE4_3430_MMC2_DAT4, - AH3_3430_MMC2_DAT5, - AF3_3430_MMC2_DAT6, - AE3_3430_MMC2_DAT7, - - /* MMC3 */ - AF10_3430_MMC3_CLK, - AC3_3430_MMC3_CMD, - AE11_3430_MMC3_DAT0, - AH9_3430_MMC3_DAT1, - AF13_3430_MMC3_DAT2, - AF13_3430_MMC3_DAT3, - - /* SYS_NIRQ T2 INT1 */ - AF26_34XX_SYS_NIRQ, - - /* EHCI GPIO's for OMAP3EVM (Rev >= E) */ - AH14_34XX_GPIO21, - AF9_34XX_GPIO22, - U3_34XX_GPIO61, -}; - struct omap_mux_cfg { struct pin_config *pins; unsigned long size; @@ -865,14 +649,14 @@ struct omap_mux_cfg { #ifdef CONFIG_OMAP_MUX /* setup pin muxing in Linux */ extern int omap1_mux_init(void); -extern int omap2_mux_init(void); extern int omap_mux_register(struct omap_mux_cfg *); extern int omap_cfg_reg(unsigned long reg_cfg); #else /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */ static inline int omap1_mux_init(void) { return 0; } -static inline int omap2_mux_init(void) { return 0; } static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; } #endif +extern int omap2_mux_init(void); + #endif diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h index e52902a15c1a..ef870de43c29 100644 --- a/arch/arm/plat-omap/include/plat/omap44xx.h +++ b/arch/arm/plat-omap/include/plat/omap44xx.h @@ -26,8 +26,10 @@ #define OMAP44XX_EMIF2_BASE 0x4d000000 #define OMAP44XX_DMM_BASE 0x4e000000 #define OMAP4430_32KSYNCT_BASE 0x4a304000 -#define OMAP4430_CM_BASE 0x4a004000 -#define OMAP4430_PRM_BASE 0x48306000 +#define OMAP4430_CM1_BASE 0x4a004000 +#define OMAP4430_CM_BASE OMAP4430_CM1_BASE +#define OMAP4430_CM2_BASE 0x4a008000 +#define OMAP4430_PRM_BASE 0x4a306000 #define OMAP44XX_GPMC_BASE 0x50000000 #define OMAP443X_SCM_BASE 0x4a002000 #define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 11a9773a4e7f..dc1fac1d805c 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -50,8 +50,8 @@ * @pm_lats: ptr to an omap_device_pm_latency table * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats * @pm_lat_level: array index of the last odpl entry executed - -1 if never - * @dev_wakeup_lat: dev wakeup latency in microseconds - * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM + * @dev_wakeup_lat: dev wakeup latency in nanoseconds + * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM * @_state: one of OMAP_DEVICE_STATE_* (see above) * @flags: device flags * @@ -137,5 +137,7 @@ struct omap_device_pm_latency { }; -#endif +/* Get omap_device pointer from platform_device pointer */ +#define to_omap_device(x) container_of((x), struct omap_device, pdev) +#endif diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index dbdd123eca16..007935a921ea 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -50,6 +50,8 @@ struct omap_device; #define SYSC_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT) #define SYSC_SOFTRESET_SHIFT 1 #define SYSC_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT) +#define SYSC_AUTOIDLE_SHIFT 0 +#define SYSC_AUTOIDLE_MASK (1 << SYSC_AUTOIDLE_SHIFT) /* OCP SYSSTATUS bit shifts/masks */ #define SYSS_RESETDONE_SHIFT 0 @@ -62,7 +64,21 @@ struct omap_device; /** - * struct omap_hwmod_dma_info - MPU address space handled by the hwmod + * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod + * @name: name of the IRQ channel (module local name) + * @irq_ch: IRQ channel ID + * + * @name should be something short, e.g., "tx" or "rx". It is for use + * by platform_get_resource_byname(). It is defined locally to the + * hwmod. + */ +struct omap_hwmod_irq_info { + const char *name; + u16 irq; +}; + +/** + * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) * @dma_ch: DMA channel ID * @@ -294,13 +310,17 @@ struct omap_hwmod_omap4_prcm { * SDRAM controller, etc. * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM * controller, etc. + * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE) + * when module is enabled, rather than the default, which is to + * enable autoidle * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup */ #define HWMOD_SWSUP_SIDLE (1 << 0) #define HWMOD_SWSUP_MSTANDBY (1 << 1) #define HWMOD_INIT_NO_RESET (1 << 2) #define HWMOD_INIT_NO_IDLE (1 << 3) -#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 4) +#define HWMOD_NO_OCP_AUTOIDLE (1 << 4) +#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 5) /* * omap_hwmod._int_flags definitions @@ -373,7 +393,7 @@ struct omap_hwmod_omap4_prcm { struct omap_hwmod { const char *name; struct omap_device *od; - u8 *mpu_irqs; + struct omap_hwmod_irq_info *mpu_irqs; struct omap_hwmod_dma_info *sdma_chs; union { struct omap_hwmod_omap2_prcm omap2; diff --git a/arch/arm/plat-omap/include/plat/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h index 3d45ee1d3cf4..0b960051eaed 100644 --- a/arch/arm/plat-omap/include/plat/powerdomain.h +++ b/arch/arm/plat-omap/include/plat/powerdomain.h @@ -28,6 +28,8 @@ #define PWRDM_POWER_INACTIVE 0x2 #define PWRDM_POWER_ON 0x3 +#define PWRDM_MAX_PWRSTS 4 + /* Powerdomain allowable state bitfields */ #define PWRSTS_OFF_ON ((1 << PWRDM_POWER_OFF) | \ (1 << PWRDM_POWER_ON)) @@ -40,7 +42,10 @@ /* Powerdomain flags */ #define PWRDM_HAS_HDWR_SAR (1 << 0) /* hardware save-and-restore support */ - +#define PWRDM_HAS_MPU_QUIRK (1 << 1) /* MPU pwr domain has MEM bank 0 bits + * in MEM bank 1 position. This is + * true for OMAP3430 + */ /* * Number of memory banks that are power-controllable. On OMAP3430, the @@ -85,15 +90,15 @@ struct powerdomain { /* Used to represent the OMAP chip types containing this pwrdm */ const struct omap_chip_id omap_chip; - /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ - const u8 dep_bit; - /* Powerdomains that can be told to wake this powerdomain up */ struct pwrdm_dep *wkdep_srcs; /* Powerdomains that can be told to keep this pwrdm from inactivity */ struct pwrdm_dep *sleepdep_srcs; + /* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */ + const u8 dep_bit; + /* Possible powerdomain power states */ const u8 pwrsts; @@ -118,11 +123,11 @@ struct powerdomain { struct list_head node; int state; - unsigned state_counter[4]; + unsigned state_counter[PWRDM_MAX_PWRSTS]; #ifdef CONFIG_PM_DEBUG s64 timer; - s64 state_timer[4]; + s64 state_timer[PWRDM_MAX_PWRSTS]; #endif }; diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 9951345a25d6..f5a4a92393ef 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -53,6 +53,7 @@ #ifndef __ASSEMBLER__ extern void __init omap_serial_early_init(void); extern void omap_serial_init(void); +extern void omap_serial_init_port(int port); extern int omap_uart_can_sleep(void); extern void omap_uart_check_wakeup(void); extern void omap_uart_prepare_suspend(void); diff --git a/arch/arm/plat-omap/include/plat/smp.h b/arch/arm/plat-omap/include/plat/smp.h index dcaa8fde7063..8983d54c4fd2 100644 --- a/arch/arm/plat-omap/include/plat/smp.h +++ b/arch/arm/plat-omap/include/plat/smp.h @@ -28,6 +28,8 @@ /* Needed for secondary core boot */ extern void omap_secondary_startup(void); +extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask); +extern void omap_auxcoreboot_addr(u32 cpu_addr); /* * We use Soft IRQ1 as the IPI diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c index 05aebcad215b..06703635ace1 100644 --- a/arch/arm/plat-omap/mux.c +++ b/arch/arm/plat-omap/mux.c @@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index) { struct pin_config *reg; - if (cpu_is_omap44xx()) - return 0; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) { + printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n", + index); + WARN_ON(1); + return -EINVAL; + } if (mux_cfg == NULL) { printk(KERN_ERR "Pin mux table not initialized\n"); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index bb16e624a557..1e5648d3e3d8 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -134,18 +134,18 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat) (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit)) break; - getnstimeofday(&a); + read_persistent_clock(&a); /* XXX check return code */ odpl->activate_func(od); - getnstimeofday(&b); + read_persistent_clock(&b); c = timespec_sub(b, a); - act_lat = timespec_to_ns(&c) * NSEC_PER_USEC; + act_lat = timespec_to_ns(&c); pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time " - "%llu usec\n", od->pdev.name, od->pm_lat_level, + "%llu nsec\n", od->pdev.name, od->pm_lat_level, act_lat); WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: " @@ -190,18 +190,18 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) od->_dev_wakeup_lat_limit)) break; - getnstimeofday(&a); + read_persistent_clock(&a); /* XXX check return code */ odpl->deactivate_func(od); - getnstimeofday(&b); + read_persistent_clock(&b); c = timespec_sub(b, a); - deact_lat = timespec_to_ns(&c) * NSEC_PER_USEC; + deact_lat = timespec_to_ns(&c); pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time " - "%llu usec\n", od->pdev.name, od->pm_lat_level, + "%llu nsec\n", od->pdev.name, od->pm_lat_level, deact_lat); WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: " @@ -459,7 +459,7 @@ int omap_device_enable(struct platform_device *pdev) ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT); od->dev_wakeup_lat = 0; - od->_dev_wakeup_lat_limit = INT_MAX; + od->_dev_wakeup_lat_limit = UINT_MAX; od->_state = OMAP_DEVICE_STATE_ENABLED; return ret; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index ad2bf07d30b5..d8d5094b37ed 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -48,8 +48,10 @@ #define OMAP3_SRAM_VA 0xfe400000 #define OMAP3_SRAM_PUB_PA 0x40208000 #define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000) -#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/ -#define OMAP4_SRAM_VA 0xfe400000 /*0xfe4f0000*/ +#define OMAP4_SRAM_PA 0x40300000 +#define OMAP4_SRAM_VA 0xfe400000 +#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000) +#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000) #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) #define SRAM_BOOTLOADER_SZ 0x00 @@ -140,6 +142,10 @@ void __init omap_detect_sram(void) } else { omap_sram_size = 0x8000; /* 32K */ } + } else if (cpu_is_omap44xx()) { + omap_sram_base = OMAP4_SRAM_PUB_VA; + omap_sram_start = OMAP4_SRAM_PUB_PA; + omap_sram_size = 0xa000; /* 40K */ } else { omap_sram_base = OMAP2_SRAM_PUB_VA; omap_sram_start = OMAP2_SRAM_PUB_PA; @@ -153,7 +159,7 @@ void __init omap_detect_sram(void) } else if (cpu_is_omap44xx()) { omap_sram_base = OMAP4_SRAM_VA; omap_sram_start = OMAP4_SRAM_PA; - omap_sram_size = 0x8000; /* 32K */ + omap_sram_size = 0xe000; /* 56K */ } else { omap_sram_base = OMAP2_SRAM_VA; omap_sram_start = OMAP2_SRAM_PA; diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 51033a4503c3..d3bf17cd36f3 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -137,7 +137,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device) if (is_device) { if (cpu_is_omap24xx()) omap_cfg_reg(J20_24XX_USB0_PUEN); - else + else if (cpu_is_omap7xx()) { + omap_cfg_reg(AA17_7XX_USB_DM); + omap_cfg_reg(W16_7XX_USB_PU_EN); + omap_cfg_reg(W17_7XX_USB_VBUSI); + omap_cfg_reg(W18_7XX_USB_DMCK_OUT); + omap_cfg_reg(W19_7XX_USB_DCRST); + } else omap_cfg_reg(W4_USB_PUEN); } |