diff options
Diffstat (limited to 'arch')
81 files changed, 678 insertions, 1306 deletions
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c index e1362ce48497..7119ef28e0ad 100644 --- a/arch/arm/mach-omap1/board-h2-mmc.c +++ b/arch/arm/mach-omap1/board-h2-mmc.c @@ -13,12 +13,11 @@ */ #include <linux/gpio.h> #include <linux/platform_device.h> - +#include <linux/platform_data/gpio-omap.h> #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h2.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index 376f7f29ef77..fc84e2b3400a 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -39,7 +39,7 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -50,6 +50,7 @@ #include "common.h" #include "board-h2.h" +#include "dma.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define OMAP1610_ETHR_START 0x04000300 diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c index c74daace8cd6..17d77914d769 100644 --- a/arch/arm/mach-omap1/board-h3-mmc.c +++ b/arch/arm/mach-omap1/board-h3-mmc.c @@ -16,9 +16,8 @@ #include <linux/i2c/tps65010.h> -#include <plat/mmc.h> - #include "board-h3.h" +#include "mmc.h" #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ededdb7ef28c..81f55a6c5678 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -43,7 +43,7 @@ #include <mach/mux.h> #include <plat/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/flash.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index 87ab2086ef96..f23200ceb43d 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -43,7 +43,7 @@ #include <asm/mach/arch.h> #include <mach/omap7xx.h> -#include <plat/mmc.h> +#include "mmc.h" #include <mach/irqs.h> #include <mach/usb.h> diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index db5f7d2976e7..411cc5b14ce3 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -36,13 +36,13 @@ #include <plat/fpga.h> #include <plat/tc.h> #include <linux/platform_data/keypad-omap.h> -#include <plat/mmc.h> #include <mach/hardware.h> #include <mach/usb.h> #include "iomap.h" #include "common.h" +#include "mmc.h" /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */ #define INNOVATOR1610_ETHR_START 0x04000300 diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 7d5c06d6a52a..cb72f2474430 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -29,13 +29,13 @@ #include <asm/mach/map.h> #include <mach/mux.h> -#include <plat/mmc.h> #include <plat/clock.h> #include <mach/hardware.h> #include <mach/usb.h> #include "common.h" +#include "mmc.h" #define ADS7846_PENDOWN_GPIO 15 diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 1c578d58923a..eac94c267f5b 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -37,7 +37,7 @@ #include <mach/flash.h> #include <mach/mux.h> #include <plat/tc.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 97158095083c..5b8ac0fcf451 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -36,7 +36,7 @@ #include <plat/led.h> #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMTT_USBDETECT_GPIO 0 #define PALMTT_CABLE_GPIO 1 diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e311032e7eeb..9f3460321ecd 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -38,7 +38,7 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/tc.h> #include <mach/irda.h> #include <linux/platform_data/keypad-omap.h> @@ -47,6 +47,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" #define PALMZ71_USBDETECT_GPIO 0 #define PALMZ71_PENIRQ_GPIO 6 diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index 5932d56e17bf..4fcf19c78a08 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -16,9 +16,10 @@ #include <linux/platform_device.h> #include <mach/hardware.h> -#include <plat/mmc.h> #include <mach/board-sx1.h> +#include "mmc.h" + #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) static int mmc_set_power(struct device *dev, int slot, int power_on, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 13bf2cc56814..f4c5db991226 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -36,7 +36,7 @@ #include <mach/flash.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/irda.h> #include <plat/tc.h> #include <mach/board-sx1.h> @@ -45,6 +45,7 @@ #include <mach/usb.h> #include "common.h" +#include "dma.h" /* Write to I2C device */ int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value) diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index d3fec92c54cb..8e32d50d275b 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -21,8 +21,6 @@ #include <plat/tc.h> #include <mach/mux.h> -#include <plat/dma.h> -#include <plat/mmc.h> #include <mach/omap7xx.h> #include <mach/camera.h> @@ -30,6 +28,8 @@ #include "common.h" #include "clock.h" +#include "dma.h" +#include "mmc.h" #if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE) @@ -175,6 +175,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base, res[3].name = "tx"; res[3].flags = IORESOURCE_DMA; + if (cpu_is_omap7xx()) + data->slots[0].features = MMC_OMAP7XX; + if (cpu_is_omap15xx()) + data->slots[0].features = MMC_OMAP15XX; + if (cpu_is_omap16xx()) + data->slots[0].features = MMC_OMAP16XX; + ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res)); if (ret == 0) ret = platform_device_add_data(pdev, data, sizeof(*data)); diff --git a/arch/arm/mach-omap1/dma.c b/arch/arm/mach-omap1/dma.c index 29007fef84cd..91594177f6bc 100644 --- a/arch/arm/mach-omap1/dma.c +++ b/arch/arm/mach-omap1/dma.c @@ -25,11 +25,13 @@ #include <linux/device.h> #include <linux/io.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/tc.h> #include <mach/irqs.h> +#include "dma.h" + #define OMAP1_DMA_BASE (0xfffed800) #define OMAP1_LOGICAL_DMA_CH_COUNT 17 #define OMAP1_DMA_STRIDE 0x40 diff --git a/arch/arm/mach-omap1/dma.h b/arch/arm/mach-omap1/dma.h new file mode 100644 index 000000000000..da6345dab03f --- /dev/null +++ b/arch/arm/mach-omap1/dma.h @@ -0,0 +1,83 @@ +/* + * OMAP1 DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP1_DMA_CHANNEL_H +#define __OMAP1_DMA_CHANNEL_H + +/* DMA channels for omap1 */ +#define OMAP_DMA_NO_DEVICE 0 +#define OMAP_DMA_MCSI1_TX 1 +#define OMAP_DMA_MCSI1_RX 2 +#define OMAP_DMA_I2C_RX 3 +#define OMAP_DMA_I2C_TX 4 +#define OMAP_DMA_EXT_NDMA_REQ 5 +#define OMAP_DMA_EXT_NDMA_REQ2 6 +#define OMAP_DMA_UWIRE_TX 7 +#define OMAP_DMA_MCBSP1_TX 8 +#define OMAP_DMA_MCBSP1_RX 9 +#define OMAP_DMA_MCBSP3_TX 10 +#define OMAP_DMA_MCBSP3_RX 11 +#define OMAP_DMA_UART1_TX 12 +#define OMAP_DMA_UART1_RX 13 +#define OMAP_DMA_UART2_TX 14 +#define OMAP_DMA_UART2_RX 15 +#define OMAP_DMA_MCBSP2_TX 16 +#define OMAP_DMA_MCBSP2_RX 17 +#define OMAP_DMA_UART3_TX 18 +#define OMAP_DMA_UART3_RX 19 +#define OMAP_DMA_CAMERA_IF_RX 20 +#define OMAP_DMA_MMC_TX 21 +#define OMAP_DMA_MMC_RX 22 +#define OMAP_DMA_NAND 23 +#define OMAP_DMA_IRQ_LCD_LINE 24 +#define OMAP_DMA_MEMORY_STICK 25 +#define OMAP_DMA_USB_W2FC_RX0 26 +#define OMAP_DMA_USB_W2FC_RX1 27 +#define OMAP_DMA_USB_W2FC_RX2 28 +#define OMAP_DMA_USB_W2FC_TX0 29 +#define OMAP_DMA_USB_W2FC_TX1 30 +#define OMAP_DMA_USB_W2FC_TX2 31 + +/* These are only for 1610 */ +#define OMAP_DMA_CRYPTO_DES_IN 32 +#define OMAP_DMA_SPI_TX 33 +#define OMAP_DMA_SPI_RX 34 +#define OMAP_DMA_CRYPTO_HASH 35 +#define OMAP_DMA_CCP_ATTN 36 +#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 +#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 +#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 +#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 +#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 +#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 +#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 +#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 +#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 +#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 +#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 +#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 +#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 +#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 +#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 +#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 +#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 +#define OMAP_DMA_MMC2_TX 54 +#define OMAP_DMA_MMC2_RX 55 +#define OMAP_DMA_CRYPTO_DES_OUT 56 + +#endif /* __OMAP1_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 6a5baab1f4cb..244cc757ce7d 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -18,7 +18,7 @@ #include <mach/mux.h> #include <plat/tc.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include "iomap.h" #include "common.h" diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c index ed42628611bc..7ed8c1857d56 100644 --- a/arch/arm/mach-omap1/lcd_dma.c +++ b/arch/arm/mach-omap1/lcd_dma.c @@ -27,11 +27,13 @@ #include <linux/interrupt.h> #include <linux/io.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/hardware.h> #include <mach/lcdc.h> +#include "dma.h" + int omap_lcd_dma_running(void) { /* diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index bdc2e7541adb..3d461e1b8577 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -19,7 +19,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <mach/mux.h> #include <plat/cpu.h> #include <linux/platform_data/asoc-ti-mcbsp.h> @@ -27,6 +27,7 @@ #include <mach/irqs.h> #include "iomap.h" +#include "dma.h" #define DPS_RSTCT2_PER_EN (1 << 0) #define DSP_RSTCT2_WD_PER_EN (1 << 1) diff --git a/arch/arm/mach-omap1/mmc.h b/arch/arm/mach-omap1/mmc.h new file mode 100644 index 000000000000..39c2b13de884 --- /dev/null +++ b/arch/arm/mach-omap1/mmc.h @@ -0,0 +1,18 @@ +#include <linux/mmc/host.h> +#include <linux/platform_data/mmc-omap.h> + +#define OMAP15XX_NR_MMC 1 +#define OMAP16XX_NR_MMC 2 +#define OMAP1_MMC_SIZE 0x080 +#define OMAP1_MMC1_BASE 0xfffb7800 +#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers); +#else +static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, + int nr_controllers) +{ +} +#endif diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 47ec16155483..c16b03ad5b50 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -54,7 +54,7 @@ #include <plat/sram.h> #include <plat/tc.h> #include <mach/mux.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> #include <mach/irqs.h> diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 95b384d54f8a..49e49d0b7cf5 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -34,7 +34,7 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <plat/usb.h> #include "gpmc-smc91x.h" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 96cd3693e1ae..3e8725b73161 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -32,11 +32,11 @@ #include <plat/usb.h> #include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> +#include <plat-omap/dma-omap.h> #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include "board-flash.h" diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 3669c120c7e8..2ab267ec3b75 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -35,7 +35,6 @@ #include "common.h" #include <plat/usb.h> -#include <plat/mmc.h> #include "omap4-keypad.h" #include <video/omapdss.h> #include <video/omap-panel-nokia-dsi.h> @@ -45,6 +44,7 @@ #include "soc.h" #include "mux.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index cea3abace815..8cdd18699de6 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -35,7 +35,7 @@ #include <plat/led.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 376d26eb601c..73e2ba9b343b 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -40,7 +40,7 @@ #include "common.h" #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include <plat/usb.h> #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -53,6 +53,7 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc-nand.h" #define CM_T35_GPIO_PENDOWN 57 #define SB_T35_USB_HUB_RESET_GPIO 167 @@ -181,7 +182,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = { static void __init cm_t35_init_nand(void) { - if (gpmc_nand_init(&cm_t35_nand_data) < 0) + if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0) pr_err("CM-T35: Unable to register NAND device\n"); } #else diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 59c0a45f75b0..b5495e415024 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -41,7 +41,7 @@ #include "common.h" #include <plat/usb.h> #include <linux/platform_data/mtd-nand-omap2.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "am35xx.h" @@ -49,6 +49,7 @@ #include "control.h" #include "common-board-devices.h" #include "am35xx-emac.h" +#include "gpmc-nand.h" #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static struct gpio_led cm_t3517_leds[] = { @@ -240,7 +241,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = { static void __init cm_t3517_init_nand(void) { - if (gpmc_nand_init(&cm_t3517_nand_data) < 0) + if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0) pr_err("CM-T3517: NAND initialization failed\n"); } #else diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1fd161e934c7..3eedb8fd0370 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -39,7 +39,7 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include <video/omapdss.h> @@ -55,8 +55,11 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OMAP_DM9000_GPIO_IRQ 25 #define OMAP3_DEVKIT_TS_GPIO 27 @@ -621,8 +624,9 @@ static void __init devkit8000_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, - ARRAY_SIZE(devkit8000_nand_partitions)); + board_nand_init(devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index e642acf9cad0..020b96b91f73 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -18,13 +18,15 @@ #include <linux/io.h> #include <plat/cpu.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <linux/platform_data/mtd-onenand-omap2.h> #include <plat/tc.h> #include "common.h" #include "board-flash.h" +#include "gpmc-onenand.h" +#include "gpmc-nand.h" #define REG_FPGA_REV 0x10 #define REG_FPGA_DIP_SWITCH_INPUT2 0x60 @@ -104,36 +106,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, defined(CONFIG_MTD_NAND_OMAP2_MODULE) /* Note that all values in this struct are in nanoseconds */ -static struct gpmc_timings nand_timings = { +struct gpmc_timings nand_default_timings[1] = { + { + .sync_clk = 0, - .sync_clk = 0, + .cs_on = 0, + .cs_rd_off = 36, + .cs_wr_off = 36, - .cs_on = 0, - .cs_rd_off = 36, - .cs_wr_off = 36, + .adv_on = 6, + .adv_rd_off = 24, + .adv_wr_off = 36, - .adv_on = 6, - .adv_rd_off = 24, - .adv_wr_off = 36, + .we_off = 30, + .oe_off = 48, - .we_off = 30, - .oe_off = 48, + .access = 54, + .rd_cycle = 72, + .wr_cycle = 72, - .access = 54, - .rd_cycle = 72, - .wr_cycle = 72, - - .wr_access = 30, - .wr_data_mux_bus = 0, + .wr_access = 30, + .wr_data_mux_bus = 0, + }, }; -static struct omap_nand_platform_data board_nand_data = { - .gpmc_t = &nand_timings, -}; +static struct omap_nand_platform_data board_nand_data; void -__init board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) +__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs, + int nand_type, struct gpmc_timings *gpmc_t) { board_nand_data.cs = cs; board_nand_data.parts = nand_parts; @@ -141,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, board_nand_data.devsize = nand_type; board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; - gpmc_nand_init(&board_nand_data); + gpmc_nand_init(&board_nand_data, gpmc_t); } #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ @@ -238,5 +239,6 @@ void __init board_flash_init(struct flash_partitions partition_info[], pr_err("NAND: Unable to find configuration in GPMC\n"); else board_nand_init(partition_info[2].parts, - partition_info[2].nr_parts, nandcs, nand_type); + partition_info[2].nr_parts, nandcs, + nand_type, nand_default_timings); } diff --git a/arch/arm/mach-omap2/board-flash.h b/arch/arm/mach-omap2/board-flash.h index c44b70d52021..2fb5d41a9fae 100644 --- a/arch/arm/mach-omap2/board-flash.h +++ b/arch/arm/mach-omap2/board-flash.h @@ -12,7 +12,7 @@ */ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <plat/gpmc.h> +#include "gpmc.h" #define PDC_NOR 1 #define PDC_NAND 2 @@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[], #if defined(CONFIG_MTD_NAND_OMAP2) || \ defined(CONFIG_MTD_NAND_OMAP2_MODULE) extern void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type); + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t); +extern struct gpmc_timings nand_default_timings[]; #else static inline void board_nand_init(struct mtd_partition *nand_parts, - u8 nr_parts, u8 cs, int nand_type) + u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t) { } +#define nand_default_timings NULL #endif #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 8d04bf851af4..366ebd93ae24 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -32,8 +32,7 @@ #include <asm/mach/map.h> #include <plat/menelaus.h> -#include <plat/dma.h> -#include <plat/gpmc.h> +#include <plat-omap/dma-omap.h> #include "debug-devices.h" #include <video/omapdss.h> @@ -42,6 +41,7 @@ #include "common.h" #include "mux.h" #include "control.h" +#include "gpmc.h" #define H4_FLASH_CS 0 #define H4_SMC91X_CS 1 diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 48d5e41dfbfa..9a9a9b5f78b6 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -30,7 +30,7 @@ #include <asm/mach/arch.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <plat/usb.h> #include <video/omapdss.h> @@ -43,6 +43,7 @@ #include "common-board-devices.h" #include "board-flash.h" #include "control.h" +#include "gpmc-onenand.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -175,7 +176,7 @@ static void __init igep_flash_init(void) pr_info("IGEP: initializing NAND memory device\n"); board_nand_init(igep_flash_partitions, ARRAY_SIZE(igep_flash_partitions), - 0, NAND_BUSWIDTH_16); + 0, NAND_BUSWIDTH_16, nand_default_timings); } else if (mux == IGEP_SYSBOOT_ONENAND) { pr_info("IGEP: initializing OneNAND memory device\n"); board_onenand_init(igep_flash_partitions, diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index ee8c3cfb95b3..e1628cd25ab4 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -35,7 +35,7 @@ #include <asm/mach/map.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <mach/board-zoom.h> #include <plat/usb.h> #include "gpmc-smsc911x.h" @@ -420,8 +420,8 @@ static void __init omap_ldp_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); usb_musb_init(NULL); - board_nand_init(ldp_nand_partitions, - ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); + board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), + ZOOM_NAND_CS, 0, nand_default_timings); omap_hsmmc_init(mmc); ldp_display_init(); diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index d95f727ca39a..cea433b9b7b9 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -29,9 +29,10 @@ #include "common.h" #include <plat/menelaus.h> -#include <plat/mmc.h> +#include "mmc.h" #include "mux.h" +#include "gpmc-onenand.h" #define TUSB6010_ASYNC_CS 1 #define TUSB6010_SYNC_CS 4 diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 388c431c745a..f11a5eb595f7 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -41,7 +41,7 @@ #include "common.h" #include <video/omapdss.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include <plat/omap_device.h> @@ -49,8 +49,11 @@ #include "mux.h" #include "hsmmc.h" #include "pm.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + /* * OMAP3 Beagle revision * Run time detection of Beagle revision is done by reading GPIO. @@ -512,8 +515,9 @@ static void __init omap3_beagle_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, - ARRAY_SIZE(omap3beagle_nand_partitions)); + board_nand_init(omap3beagle_nand_partitions, + ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_twl4030_audio_init("omap3beagle"); /* Ensure msecure is mux'd to be able to set the RTC. */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b9b776b6c954..1d8e926b52fe 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -56,6 +56,9 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "board-flash.h" + +#define NAND_CS 0 #define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 @@ -731,8 +734,9 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions, - ARRAY_SIZE(omap3evm_nand_partitions)); + board_nand_init(omap3evm_nand_partitions, + ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index cbcea420e332..6f58cad5bf74 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -34,8 +34,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "gpmc-smsc911x.h" -#include <plat/gpmc.h> #include <plat/usb.h> #include "common.h" @@ -43,6 +41,8 @@ #include "hsmmc.h" #include "control.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-smsc911x.h" #define OMAP3LOGIC_SMSC911X_CS 1 diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 00a1f4ae6e44..f286b4b4bd5b 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -50,6 +50,7 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc-nand.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -602,7 +603,7 @@ static void __init omap3pandora_init(void) omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); usb_musb_init(NULL); - gpmc_nand_init(&pandora_nand_data); + gpmc_nand_init(&pandora_nand_data, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 731235eb319e..3c83b9fbff45 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -40,7 +40,7 @@ #include <asm/mach/flash.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include <video/omapdss.h> diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 944ffc436577..cd282ae0856b 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -44,12 +44,13 @@ #include <asm/system_info.h> #include "common.h" -#include <plat/gpmc.h> +#include "gpmc.h" #include <linux/platform_data/mtd-nand-omap2.h> #include <plat/usb.h> #include "mux.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" #include <asm/setup.h> @@ -59,6 +60,8 @@ #define TB_BL_PWM_TIMER 9 #define TB_KILL_POWER_GPIO 168 +#define NAND_CS 0 + static unsigned long touchbook_revision; static struct mtd_partition omap3touchbook_nand_partitions[] = { @@ -365,8 +368,9 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, - ARRAY_SIZE(omap3touchbook_nand_partitions)); + board_nand_init(omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, + NAND_BUSWIDTH_16, NULL); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index bfcd397e233c..e9ce9fb9ffac 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -40,10 +40,10 @@ #include "common.h" #include <plat/usb.h> -#include <plat/mmc.h> #include <video/omap-panel-tfp410.h> #include "soc.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index b700685762b5..3a9d1fa8bebd 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -49,14 +49,17 @@ #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> #include <video/omap-panel-tfp410.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include <plat/usb.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "board-flash.h" #include "common-board-devices.h" +#define NAND_CS 0 + #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 #define OVERO_GPIO_PENDOWN 114 @@ -495,8 +498,8 @@ static void __init overo_init(void) omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_nand_flash_init(0, overo_nand_partitions, - ARRAY_SIZE(overo_nand_partitions)); + board_nand_init(overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 45997bfbcbd2..208a7a239db5 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -23,16 +23,17 @@ #include <asm/mach-types.h> #include <plat/i2c.h> -#include <plat/mmc.h> #include <plat/usb.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "common.h" #include <plat/serial.h> #include "mux.h" +#include "mmc.h" #include "hsmmc.h" #include "sdram-nokia.h" #include "common-board-devices.h" +#include "gpmc-onenand.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 020e03c95bfe..c2eed847c05b 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -31,8 +31,7 @@ #include <asm/system_info.h> #include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> +#include <plat-omap/dma-omap.h> #include <plat/omap-pm.h> #include "gpmc-smc91x.h" @@ -54,6 +53,8 @@ #include "mux.h" #include "hsmmc.h" #include "common-board-devices.h" +#include "gpmc.h" +#include "gpmc-onenand.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 7bbb05d9689b..63b33c63bd94 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -23,12 +23,12 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include "common.h" -#include <plat/dma.h> -#include <plat/gpmc.h> +#include <plat-omap/dma-omap.h> #include <plat/usb.h> +#include "common.h" #include "mux.h" +#include "gpmc.h" #include "pm.h" #include "sdram-nokia.h" diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index afb2278a29f6..be9f71d436bf 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -17,7 +17,7 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/machine.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" #include <mach/board-zoom.h> diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4994438e1f46..c39578c1fa6d 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -113,8 +113,9 @@ static void __init omap_zoom_init(void) usbhs_init(&usbhs_bdata); } - board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), - ZOOM_NAND_CS, NAND_BUSWIDTH_16); + board_nand_init(zoom_nand_partitions, + ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS, + NAND_BUSWIDTH_16, nand_default_timings); zoom_debugboard_init(); zoom_peripherals_init(); diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 48daac2581b4..ad856092c06a 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -25,7 +25,6 @@ #include <linux/spi/ads7846.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/platform_data/mtd-nand-omap2.h> #include "common.h" #include "common-board-devices.h" @@ -96,48 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, { } #endif - -#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -static struct omap_nand_platform_data nand_data; - -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - pr_info("NAND: Unable to find configuration in GPMC\n"); - return; - } - - if (nandcs < GPMC_CS_NUM) { - nand_data.cs = nandcs; - nand_data.parts = parts; - nand_data.nr_parts = nr_parts; - nand_data.devsize = options; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} -#else -void __init omap_nand_flash_init(int options, struct mtd_partition *parts, - int nr_parts) -{ -} -#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index a0b4a42836ab..72bb41b3fd25 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -10,6 +10,5 @@ struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, struct ads7846_platform_data *board_pdata); -void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); #endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index c8c211731d26..e9ee9d99f881 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -24,7 +24,7 @@ #include <asm/mach/map.h> #include "iomap.h" -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include "omap4-keypad.h" @@ -34,6 +34,7 @@ #include "mux.h" #include "control.h" #include "devices.h" +#include "dma.h" #define L3_MODULES_MAX_LEN 12 #define L3_MODULES 3 diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index ff75abe60af2..4e3ac6b9449e 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -30,7 +30,7 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #define OMAP2_DMA_STRIDE 0x60 diff --git a/arch/arm/mach-omap2/dma.h b/arch/arm/mach-omap2/dma.h new file mode 100644 index 000000000000..eba80dbc5218 --- /dev/null +++ b/arch/arm/mach-omap2/dma.h @@ -0,0 +1,131 @@ +/* + * OMAP2PLUS DMA channel definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __OMAP2PLUS_DMA_CHANNEL_H +#define __OMAP2PLUS_DMA_CHANNEL_H + + +/* DMA channels for 24xx */ +#define OMAP24XX_DMA_NO_DEVICE 0 +#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ +#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ +#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ +#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ +#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ +#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ +#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ +#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ +#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ +#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ +#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ +#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ +#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ +#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ +#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ +#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ +#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ +#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ +#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ +#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ +#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ +#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ +#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ +#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ +#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ +#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ +#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ +#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ +#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ +#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ +#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ +#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ +#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ +#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ +#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ +#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ +#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ +#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ +#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ +#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ +#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ +#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ +#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ +#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ +#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ +#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ +#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ +#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ +#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ +#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ +#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ +#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ +#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ +#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ +#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ +#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ +#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ +#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ +#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ +#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ +#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ +#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ +#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ +#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ +#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ +#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ +#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ +#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ +#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ +#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ +#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ +#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ +#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ +#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ +#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ +#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ +#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ +#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ +#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ +#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ +#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ +#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ +#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ +#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ +#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ +#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ +#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ +#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ +#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ +#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ +#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ +#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ +#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ +#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ +#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ +#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ + +#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ +#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + +#endif /* __OMAP2PLUS_DMA_CHANNEL_H */ diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index 4acf497faeb3..8607735b3ab3 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -17,9 +17,12 @@ #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-nand.h" + +/* minimum size for IO mapping */ +#define NAND_IO_SIZE 4 static struct resource gpmc_nand_resource[] = { { @@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = { .resource = gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) +static int omap2_nand_gpmc_retime( + struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { struct gpmc_timings t; int err; - if (!gpmc_nand_data->gpmc_t) - return 0; - memset(&t, 0, sizeof(t)); - t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk; - t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on); - t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on); + t.sync_clk = gpmc_t->sync_clk; + t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on); + t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on); /* Read */ - t.adv_rd_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_rd_off); + t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off); t.oe_on = t.adv_on; - t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access); - t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off); - t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off); - t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle); + t.access = gpmc_round_ns_to_ticks(gpmc_t->access); + t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off); + t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off); + t.rd_cycle = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle); /* Write */ - t.adv_wr_off = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->adv_wr_off); + t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off); t.we_on = t.oe_on; if (cpu_is_omap34xx()) { - t.wr_data_mux_bus = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_data_mux_bus); - t.wr_access = gpmc_round_ns_to_ticks( - gpmc_nand_data->gpmc_t->wr_access); + t.wr_data_mux_bus = gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus); + t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access); } - t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off); - t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off); - t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle); + t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off); + t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off); + t.wr_cycle = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle); /* Configure GPMC */ if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) @@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data return 0; } -int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) +static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt) +{ + /* support only OMAP3 class */ + if (!cpu_is_omap34xx()) { + pr_err("BCH ecc is not supported on this CPU\n"); + return 0; + } + + /* + * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. + * Other chips may be added if confirmed to work. + */ + if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) && + (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { + pr_err("BCH 4-bit mode is not supported on this CPU\n"); + return 0; + } + + return 1; +} + +int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, + struct gpmc_timings *gpmc_t) { int err = 0; struct device *dev = &gpmc_nand_device.dev; @@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE); gpmc_nand_resource[2].start = gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT); - /* Set timings in GPMC */ - err = omap2_nand_gpmc_retime(gpmc_nand_data); - if (err < 0) { - dev_err(dev, "Unable to set gpmc timings: %d\n", err); - return err; + + if (gpmc_t) { + err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t); + if (err < 0) { + dev_err(dev, "Unable to set gpmc timings: %d\n", err); + return err; + } } /* Enable RD PIN Monitoring Reg */ @@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); + if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt)) + return -EINVAL; + err = platform_device_register(&gpmc_nand_device); if (err < 0) { dev_err(dev, "Unable to register NAND device\n"); diff --git a/arch/arm/mach-omap2/gpmc-nand.h b/arch/arm/mach-omap2/gpmc-nand.h new file mode 100644 index 000000000000..d59e1281e851 --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-nand.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-omap2/gpmc-nand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_NAND_H +#define __OMAP2_GPMC_NAND_H + +#include "gpmc.h" +#include <linux/platform_data/mtd-nand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2) +extern int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t); +#else +static inline int gpmc_nand_init(struct omap_nand_platform_data *d, + struct gpmc_timings *gpmc_t) +{ + return 0; +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 916716e1da3b..d102183ed9a5 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -16,15 +16,25 @@ #include <linux/mtd/onenand_regs.h> #include <linux/io.h> #include <linux/platform_data/mtd-onenand-omap2.h> +#include <linux/err.h> #include <asm/mach/flash.h> -#include <plat/gpmc.h> - +#include "gpmc.h" #include "soc.h" +#include "gpmc-onenand.h" #define ONENAND_IO_SIZE SZ_128K +#define ONENAND_FLAG_SYNCREAD (1 << 0) +#define ONENAND_FLAG_SYNCWRITE (1 << 1) +#define ONENAND_FLAG_HF (1 << 2) +#define ONENAND_FLAG_VHF (1 << 3) + +static unsigned onenand_flags; +static unsigned latency; +static int fclk_offset; + static struct omap_onenand_platform_data *gpmc_onenand_data; static struct resource gpmc_onenand_resource = { @@ -38,11 +48,9 @@ static struct platform_device gpmc_onenand_device = { .resource = &gpmc_onenand_resource, }; -static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) +static struct gpmc_timings omap2_onenand_calc_async_timings(void) { struct gpmc_timings t; - u32 reg; - int err; const int t_cer = 15; const int t_avdp = 12; @@ -55,11 +63,6 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) const int t_wpl = 40; const int t_wph = 30; - /* Ensure sync read and sync write are disabled */ - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; - writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); - memset(&t, 0, sizeof(t)); t.sync_clk = 0; t.cs_on = 0; @@ -86,25 +89,30 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base) t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph); t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez); + return t; +} + +static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) +{ /* Configure GPMC for asynchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16 | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static void omap2_onenand_set_async_mode(void __iomem *onenand_base) +{ + u32 reg; /* Ensure sync read and sync write are disabled */ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE; writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); - - return 0; } -static void set_onenand_cfg(void __iomem *onenand_base, int latency, - int sync_read, int sync_write, int hf, int vhf) +static void set_onenand_cfg(void __iomem *onenand_base) { u32 reg; @@ -112,19 +120,19 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; - if (sync_read) + if (onenand_flags & ONENAND_FLAG_SYNCREAD) reg |= ONENAND_SYS_CFG1_SYNC_READ; else reg &= ~ONENAND_SYS_CFG1_SYNC_READ; - if (sync_write) + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) reg |= ONENAND_SYS_CFG1_SYNC_WRITE; else reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE; - if (hf) + if (onenand_flags & ONENAND_FLAG_HF) reg |= ONENAND_SYS_CFG1_HF; else reg &= ~ONENAND_SYS_CFG1_HF; - if (vhf) + if (onenand_flags & ONENAND_FLAG_VHF) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; @@ -132,21 +140,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency, } static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, bool *clk_dep) + void __iomem *onenand_base) { u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID); - int freq = 0; - - if (cfg->get_freq) { - struct onenand_freq_info fi; - - fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID); - fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID); - fi.ver_id = ver; - freq = cfg->get_freq(&fi, clk_dep); - if (freq) - return freq; - } + int freq; switch ((ver >> 4) & 0xf) { case 0: @@ -172,9 +169,9 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, return freq; } -static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, - void __iomem *onenand_base, - int *freq_ptr) +static struct gpmc_timings +omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, + int freq) { struct gpmc_timings t; const int t_cer = 15; @@ -184,29 +181,15 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, const int t_wpl = 40; const int t_wph = 30; int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; - int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency; - int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0; - int err, ticks_cez; - int cs = cfg->cs, freq = *freq_ptr; u32 reg; - bool clk_dep = false; + int div, fclk_offset_ns, gpmc_clk_ns; + int ticks_cez; + int cs = cfg->cs; - if (cfg->flags & ONENAND_SYNC_READ) { - sync_read = 1; - } else if (cfg->flags & ONENAND_SYNC_READWRITE) { - sync_read = 1; - sync_write = 1; - } else - return omap2_onenand_set_async_mode(cs, onenand_base); - - if (!freq) { - /* Very first call freq is not known */ - err = omap2_onenand_set_async_mode(cs, onenand_base); - if (err) - return err; - freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep); - first_time = 1; - } + if (cfg->flags & ONENAND_SYNC_READ) + onenand_flags = ONENAND_FLAG_SYNCREAD; + else if (cfg->flags & ONENAND_SYNC_READWRITE) + onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; switch (freq) { case 104: @@ -244,44 +227,31 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, t_ach = 9; t_aavdh = 7; t_rdyo = 15; - sync_write = 0; + onenand_flags &= ~ONENAND_FLAG_SYNCWRITE; break; } - div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period); + div = gpmc_calc_divider(min_gpmc_clk_period); gpmc_clk_ns = gpmc_ticks_to_ns(div); if (gpmc_clk_ns < 15) /* >66Mhz */ - hf = 1; + onenand_flags |= ONENAND_FLAG_HF; + else + onenand_flags &= ~ONENAND_FLAG_HF; if (gpmc_clk_ns < 12) /* >83Mhz */ - vhf = 1; - if (vhf) + onenand_flags |= ONENAND_FLAG_VHF; + else + onenand_flags &= ~ONENAND_FLAG_VHF; + if (onenand_flags & ONENAND_FLAG_VHF) latency = 8; - else if (hf) + else if (onenand_flags & ONENAND_FLAG_HF) latency = 6; else if (gpmc_clk_ns >= 25) /* 40 MHz*/ latency = 3; else latency = 4; - if (clk_dep) { - if (gpmc_clk_ns < 12) { /* >83Mhz */ - t_ces = 3; - t_avds = 4; - } else if (gpmc_clk_ns < 15) { /* >66Mhz */ - t_ces = 5; - t_avds = 4; - } else if (gpmc_clk_ns < 25) { /* >40Mhz */ - t_ces = 6; - t_avds = 5; - } else { - t_ces = 7; - t_avds = 7; - } - } - - if (first_time) - set_onenand_cfg(onenand_base, latency, - sync_read, sync_write, hf, vhf); + /* Set synchronous read timings */ + memset(&t, 0, sizeof(t)); if (div == 1) { reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2); @@ -307,8 +277,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg); } - /* Set synchronous read timings */ - memset(&t, 0, sizeof(t)); t.sync_clk = min_gpmc_clk_period; t.cs_on = 0; t.adv_on = 0; @@ -330,7 +298,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, ticks_cez); /* Write */ - if (sync_write) { + if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { t.adv_wr_off = t.adv_rd_off; t.we_on = 0; t.we_off = t.cs_rd_off; @@ -355,6 +323,14 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, } } + return t; +} + +static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) +{ + unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; + unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; + /* Configure GPMC for synchronous read */ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_WRAPBURST_SUPP | @@ -371,11 +347,45 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, GPMC_CONFIG1_DEVICETYPE_NOR | GPMC_CONFIG1_MUXADDDATA); - err = gpmc_cs_set_timings(cs, &t); - if (err) - return err; + return gpmc_cs_set_timings(cs, t); +} + +static int omap2_onenand_setup_async(void __iomem *onenand_base) +{ + struct gpmc_timings t; + int ret; + + omap2_onenand_set_async_mode(onenand_base); - set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf); + t = omap2_onenand_calc_async_timings(); + + ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + omap2_onenand_set_async_mode(onenand_base); + + return 0; +} + +static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) +{ + int ret, freq = *freq_ptr; + struct gpmc_timings t; + + if (!freq) { + /* Very first call freq is not known */ + freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base); + set_onenand_cfg(onenand_base); + } + + t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); + + ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); + if (IS_ERR_VALUE(ret)) + return ret; + + set_onenand_cfg(onenand_base); *freq_ptr = freq; @@ -385,15 +395,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg, static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) { struct device *dev = &gpmc_onenand_device.dev; + unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE; + int ret; - /* Set sync timings in GPMC */ - if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base, - freq_ptr) < 0) { - dev_err(dev, "Unable to set synchronous mode\n"); - return -EINVAL; + ret = omap2_onenand_setup_async(onenand_base); + if (ret) { + dev_err(dev, "unable to set to async mode\n"); + return ret; } - return 0; + if (!(gpmc_onenand_data->flags & l)) + return 0; + + ret = omap2_onenand_setup_sync(onenand_base, freq_ptr); + if (ret) + dev_err(dev, "unable to set to sync mode\n"); + return ret; } void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) @@ -411,6 +428,11 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } + if (cpu_is_omap34xx()) + gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX; + else + gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX; + err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, (unsigned long *)&gpmc_onenand_resource.start); if (err < 0) { diff --git a/arch/arm/mach-omap2/gpmc-onenand.h b/arch/arm/mach-omap2/gpmc-onenand.h new file mode 100644 index 000000000000..216f23a8b45c --- /dev/null +++ b/arch/arm/mach-omap2/gpmc-onenand.h @@ -0,0 +1,24 @@ +/* + * arch/arm/mach-omap2/gpmc-onenand.h + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __OMAP2_GPMC_ONENAND_H +#define __OMAP2_GPMC_ONENAND_H + +#include <linux/platform_data/mtd-onenand-omap2.h> + +#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2) +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); +#else +#define board_onenand_data NULL +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} +#endif + +#endif diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 565475310374..6eed907d594c 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -17,7 +17,7 @@ #include <linux/io.h> #include <linux/smc91x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smc91x.h" #include "soc.h" diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 249a0b440cd6..ef990118d32b 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/smsc911x.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "gpmc-smsc911x.h" static struct resource gpmc_smsc911x_resources[] = { diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e7f2b80721c4..9472541a4d8d 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -26,15 +26,16 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/platform_data/mtd-nand-omap2.h> + #include <asm/mach-types.h> -#include <plat/gpmc.h> #include <plat/cpu.h> -#include <plat/gpmc.h> #include <plat/omap_device.h> #include "soc.h" #include "common.h" +#include "gpmc.h" #define DEVICE_NAME "omap-gpmc" @@ -58,6 +59,9 @@ #define GPMC_ECC_SIZE_CONFIG 0x1fc #define GPMC_ECC1_RESULT 0x200 #define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */ +#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */ /* GPMC ECC control settings */ #define GPMC_ECC_CTRL_ECCCLEAR 0x100 @@ -74,6 +78,7 @@ #define GPMC_CS0_OFFSET 0x60 #define GPMC_CS_SIZE 0x30 +#define GPMC_BCH_SIZE 0x10 #define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF @@ -136,7 +141,6 @@ static struct resource gpmc_mem_root; static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); static unsigned int gpmc_cs_map; /* flag for cs which are initialized */ -static int gpmc_ecc_used = -EINVAL; /* cs using ecc engine */ static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -157,22 +161,6 @@ static u32 gpmc_read_reg(int idx) return __raw_readl(gpmc_base + idx); } -static void gpmc_cs_write_byte(int cs, int idx, u8 val) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - __raw_writeb(val, reg_addr); -} - -static u8 gpmc_cs_read_byte(int cs, int idx) -{ - void __iomem *reg_addr; - - reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx; - return __raw_readb(reg_addr); -} - void gpmc_cs_write_reg(int cs, int idx, u32 val) { void __iomem *reg_addr; @@ -287,7 +275,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, return -1 #endif -int gpmc_cs_calc_divider(int cs, unsigned int sync_clk) +int gpmc_calc_divider(unsigned int sync_clk) { int div; u32 l; @@ -307,7 +295,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) int div; u32 l; - div = gpmc_cs_calc_divider(cs, t->sync_clk); + div = gpmc_calc_divider(t->sync_clk); if (div < 0) return div; @@ -508,44 +496,6 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** - * gpmc_read_status - read access request to get the different gpmc status - * @cmd: command type - * @return status - */ -int gpmc_read_status(int cmd) -{ - int status = -EINVAL; - u32 regval = 0; - - switch (cmd) { - case GPMC_GET_IRQ_STATUS: - status = gpmc_read_reg(GPMC_IRQSTATUS); - break; - - case GPMC_PREFETCH_FIFO_CNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval); - break; - - case GPMC_PREFETCH_COUNT: - regval = gpmc_read_reg(GPMC_PREFETCH_STATUS); - status = GPMC_PREFETCH_STATUS_COUNT(regval); - break; - - case GPMC_STATUS_BUFFER: - regval = gpmc_read_reg(GPMC_STATUS); - /* 1 : buffer is available to write */ - status = regval & GPMC_STATUS_BUFF_EMPTY; - break; - - default: - printk(KERN_ERR "gpmc_read_status: Not supported\n"); - } - return status; -} -EXPORT_SYMBOL(gpmc_read_status); - -/** * gpmc_cs_configure - write request to configure gpmc * @cs: chip select number * @cmd: command type @@ -613,121 +563,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval) } EXPORT_SYMBOL(gpmc_cs_configure); -/** - * gpmc_nand_read - nand specific read access request - * @cs: chip select number - * @cmd: command type - */ -int gpmc_nand_read(int cs, int cmd) -{ - int rval = -EINVAL; - - switch (cmd) { - case GPMC_NAND_DATA: - rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA); - break; - - default: - printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n"); - } - return rval; -} -EXPORT_SYMBOL(gpmc_nand_read); - -/** - * gpmc_nand_write - nand specific write request - * @cs: chip select number - * @cmd: command type - * @wval: value to write - */ -int gpmc_nand_write(int cs, int cmd, int wval) -{ - int err = 0; - - switch (cmd) { - case GPMC_NAND_COMMAND: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval); - break; - - case GPMC_NAND_ADDRESS: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval); - break; - - case GPMC_NAND_DATA: - gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval); - - default: - printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n"); - err = -EINVAL; - } - return err; -} -EXPORT_SYMBOL(gpmc_nand_write); - - - -/** - * gpmc_prefetch_enable - configures and starts prefetch transfer - * @cs: cs (chip select) number - * @fifo_th: fifo threshold to be used for read/ write - * @dma_mode: dma mode enable (1) or disable (0) - * @u32_count: number of bytes to be transferred - * @is_write: prefetch read(0) or write post(1) mode - */ -int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write) -{ - - if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) { - pr_err("gpmc: fifo threshold is not supported\n"); - return -1; - } else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) { - /* Set the amount of bytes to be prefetched */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count); - - /* Set dma/mpu mode, the prefetch read / post write and - * enable the engine. Set which cs is has requested for. - */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) | - PREFETCH_FIFOTHRESHOLD(fifo_th) | - ENABLE_PREFETCH | - (dma_mode << DMA_MPU_MODE) | - (0x1 & is_write))); - - /* Start the prefetch engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1); - } else { - return -EBUSY; - } - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_enable); - -/** - * gpmc_prefetch_reset - disables and stops the prefetch engine - */ -int gpmc_prefetch_reset(int cs) -{ - u32 config1; - - /* check if the same module/cs is trying to reset */ - config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1); - if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs) - return -EINVAL; - - /* Stop the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0); - - /* Reset/disable the PFPW engine */ - gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0); - - return 0; -} -EXPORT_SYMBOL(gpmc_prefetch_reset); - void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) { + int i; + reg->gpmc_status = gpmc_base + GPMC_STATUS; reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET + GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs; @@ -743,7 +582,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL; reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG; reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT; - reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0; + + for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) { + reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 + + GPMC_BCH_SIZE * i; + reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 + + GPMC_BCH_SIZE * i; + } } int gpmc_get_client_irq(unsigned irq_config) @@ -1078,267 +927,3 @@ void omap3_gpmc_restore_context(void) } } #endif /* CONFIG_ARCH_OMAP3 */ - -/** - * gpmc_enable_hwecc - enable hardware ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @ecc_size: bytes for which ECC will be generated - */ -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size) -{ - unsigned int val; - - /* check if ecc module is in used */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - - /* program ecc and result sizes */ - val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F)); - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val); - - switch (mode) { - case GPMC_ECC_READ: - case GPMC_ECC_WRITE: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCREG1); - break; - case GPMC_ECC_READSYN: - gpmc_write_reg(GPMC_ECC_CONTROL, - GPMC_ECC_CTRL_ECCCLEAR | - GPMC_ECC_CTRL_ECCDISABLE); - break; - default: - printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode); - break; - } - - /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */ - val = (dev_width << 7) | (cs << 1) | (0x1); - gpmc_write_reg(GPMC_ECC_CONFIG, val); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc); - -/** - * gpmc_calculate_ecc - generate non-inverted ecc bytes - * @cs: chip select number - * @dat: data pointer over which ecc is computed - * @ecc_code: ecc code buffer - * - * Using non-inverted ECC is considered ugly since writing a blank - * page (padding) will clear the ECC bytes. This is not a problem as long - * no one is trying to write data on the seemingly unused page. Reading - * an erased page will produce an ECC mismatch between generated and read - * ECC bytes that has to be dealt with separately. - */ -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code) -{ - unsigned int val = 0x0; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - /* read ecc result */ - val = gpmc_read_reg(GPMC_ECC1_RESULT); - *ecc_code++ = val; /* P128e, ..., P1e */ - *ecc_code++ = val >> 16; /* P128o, ..., P1o */ - /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */ - *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0); - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc); - -#ifdef CONFIG_ARCH_OMAP3 - -/** - * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality - * @cs: chip select number - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - * - * This function must be executed before any call to gpmc_enable_hwecc_bch. - */ -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors) -{ - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - /* support only OMAP3 class */ - if (!cpu_is_omap34xx()) { - printk(KERN_ERR "BCH ecc is not supported on this CPU\n"); - return -EINVAL; - } - - /* - * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1. - * Other chips may be added if confirmed to work. - */ - if ((nerrors == 4) && - (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) { - printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n"); - return -EINVAL; - } - - /* sanity check */ - if (nsectors > 8) { - printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n", - nsectors); - return -EINVAL; - } - - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch); - -/** - * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality - * @cs: chip select number - * @mode: read/write mode - * @dev_width: device bus width(1 for x16, 0 for x8) - * @nsectors: how many 512-byte sectors to process - * @nerrors: how many errors to correct per sector (4 or 8) - */ -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors) -{ - unsigned int val; - - /* check if ecc module is in use */ - if (gpmc_ecc_used != -EINVAL) - return -EINVAL; - - gpmc_ecc_used = cs; - - /* clear ecc and enable bits */ - gpmc_write_reg(GPMC_ECC_CONTROL, 0x1); - - /* - * When using BCH, sector size is hardcoded to 512 bytes. - * Here we are using wrapping mode 6 both for reading and writing, with: - * size0 = 0 (no additional protected byte in spare area) - * size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area) - */ - gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12)); - - /* BCH configuration */ - val = ((1 << 16) | /* enable BCH */ - (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */ - (0x06 << 8) | /* wrap mode = 6 */ - (dev_width << 7) | /* bus width */ - (((nsectors-1) & 0x7) << 4) | /* number of sectors */ - (cs << 1) | /* ECC CS */ - (0x1)); /* enable ECC */ - - gpmc_write_reg(GPMC_ECC_CONFIG, val); - gpmc_write_reg(GPMC_ECC_CONTROL, 0x101); - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch); - -/** - * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs; and - * left-justify the resulting polynomial. - */ - *ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF); - *ecc++ = 0x13 ^ ((val2 >> 4) & 0xFF); - *ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF)); - *ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF); - *ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF); - *ecc++ = 0xac ^ ((val1 >> 4) & 0xFF); - *ecc++ = 0x7f ^ ((val1 & 0xF) << 4); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4); - -/** - * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes - * @cs: chip select number - * @dat: The pointer to data on which ecc is computed - * @ecc: The ecc output buffer - */ -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc) -{ - int i; - unsigned long nsectors, reg, val1, val2, val3, val4; - - if (gpmc_ecc_used != cs) - return -EINVAL; - - nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1; - - for (i = 0; i < nsectors; i++) { - - reg = GPMC_ECC_BCH_RESULT_0 + 16*i; - - /* Read hw-computed remainder */ - val1 = gpmc_read_reg(reg + 0); - val2 = gpmc_read_reg(reg + 4); - val3 = gpmc_read_reg(reg + 8); - val4 = gpmc_read_reg(reg + 12); - - /* - * Add constant polynomial to remainder, in order to get an ecc - * sequence of 0xFFs for a buffer filled with 0xFFs. - */ - *ecc++ = 0xef ^ (val4 & 0xFF); - *ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF); - *ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF); - *ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF); - *ecc++ = 0xed ^ (val3 & 0xFF); - *ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF); - *ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF); - *ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF); - *ecc++ = 0x97 ^ (val2 & 0xFF); - *ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF); - *ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF); - *ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF); - *ecc++ = 0xb5 ^ (val1 & 0xFF); - } - - gpmc_ecc_used = -EINVAL; - return 0; -} -EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8); - -#endif /* CONFIG_ARCH_OMAP3 */ diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/mach-omap2/gpmc.h index 2e6e2597178c..79f4dfc2adb3 100644 --- a/arch/arm/plat-omap/include/plat/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -11,6 +11,8 @@ #ifndef __OMAP2_GPMC_H #define __OMAP2_GPMC_H +#include <linux/platform_data/mtd-nand-omap2.h> + /* Maximum Number of Chip Selects */ #define GPMC_CS_NUM 8 @@ -32,15 +34,6 @@ #define GPMC_SET_IRQ_STATUS 0x00000004 #define GPMC_CONFIG_WP 0x00000005 -#define GPMC_GET_IRQ_STATUS 0x00000006 -#define GPMC_PREFETCH_FIFO_CNT 0x00000007 /* bytes available in FIFO for r/w */ -#define GPMC_PREFETCH_COUNT 0x00000008 /* remaining bytes to be read/write*/ -#define GPMC_STATUS_BUFFER 0x00000009 /* 1: buffer is available to write */ - -#define GPMC_NAND_COMMAND 0x0000000a -#define GPMC_NAND_ADDRESS 0x0000000b -#define GPMC_NAND_DATA 0x0000000c - #define GPMC_ENABLE_IRQ 0x0000000d /* ECC commands */ @@ -76,25 +69,10 @@ #define GPMC_DEVICETYPE_NOR 0 #define GPMC_DEVICETYPE_NAND 2 #define GPMC_CONFIG_WRITEPROTECT 0x00000010 -#define GPMC_STATUS_BUFF_EMPTY 0x00000001 #define WR_RD_PIN_MONITORING 0x00600000 -#define GPMC_PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F) -#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff) #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 -#define PREFETCH_FIFOTHRESHOLD_MAX 0x40 -#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8) - -enum omap_ecc { - /* 1-bit ecc: stored at end of spare area */ - OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */ - OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */ - /* 1-bit ecc: stored at beginning of spare area as romcode */ - OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */ - OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */ - OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */ -}; /* * Note that all values in this struct are in nanoseconds except sync_clk @@ -133,22 +111,6 @@ struct gpmc_timings { u16 wr_data_mux_bus; /* WRDATAONADMUXBUS */ }; -struct gpmc_nand_regs { - void __iomem *gpmc_status; - void __iomem *gpmc_nand_command; - void __iomem *gpmc_nand_address; - void __iomem *gpmc_nand_data; - void __iomem *gpmc_prefetch_config1; - void __iomem *gpmc_prefetch_config2; - void __iomem *gpmc_prefetch_control; - void __iomem *gpmc_prefetch_status; - void __iomem *gpmc_ecc_config; - void __iomem *gpmc_ecc_control; - void __iomem *gpmc_ecc_size_config; - void __iomem *gpmc_ecc1_result; - void __iomem *gpmc_bch_result0; -}; - extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); extern int gpmc_get_client_irq(unsigned irq_config); @@ -160,31 +122,14 @@ extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); extern u32 gpmc_cs_read_reg(int cs, int idx); -extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk); +extern int gpmc_calc_divider(unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); extern int gpmc_cs_set_reserved(int cs, int reserved); extern int gpmc_cs_reserved(int cs); -extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode, - unsigned int u32_count, int is_write); -extern int gpmc_prefetch_reset(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern int gpmc_read_status(int cmd); extern int gpmc_cs_configure(int cs, int cmd, int wval); -extern int gpmc_nand_read(int cs, int cmd); -extern int gpmc_nand_write(int cs, int cmd, int wval); - -int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size); -int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code); - -#ifdef CONFIG_ARCH_OMAP3 -int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors); -int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors, - int nerrors); -int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc); -int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc); -#endif /* CONFIG_ARCH_OMAP3 */ #endif diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 4d3a6324155f..ec6c2230cb38 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -17,11 +17,11 @@ #include <mach/hardware.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/mmc.h> #include <plat/omap-pm.h> #include <plat/omap_device.h> #include "mux.h" +#include "mmc.h" #include "hsmmc.h" #include "control.h" diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index ab82dbe92e02..f71e51bfbe2a 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -30,7 +30,7 @@ #include <plat/omap-pm.h> #include <plat/omap_hwmod.h> #include <plat/multi.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include "soc.h" #include "iomap.h" diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 37f8f948047b..b2c7f2300759 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -20,7 +20,7 @@ #include <linux/slab.h> #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/omap_device.h> #include <linux/pm_runtime.h> diff --git a/arch/arm/mach-omap2/mmc.h b/arch/arm/mach-omap2/mmc.h new file mode 100644 index 000000000000..0cd4b089da9c --- /dev/null +++ b/arch/arm/mach-omap2/mmc.h @@ -0,0 +1,23 @@ +#include <linux/mmc/host.h> +#include <linux/platform_data/mmc-omap.h> + +#define OMAP24XX_NR_MMC 2 +#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE +#define OMAP2_MMC1_BASE 0x4809c000 + +#define OMAP4_MMC_REG_OFFSET 0x100 + +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) +void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); +#else +static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) +{ +} +#endif + +struct omap_hwmod; +int omap_msdi_reset(struct omap_hwmod *oh); + +/* called from board-specific card detection service routine */ +extern void omap_mmc_notify_cover_event(struct device *dev, int slot, + int is_closed); diff --git a/arch/arm/mach-omap2/msdi.c b/arch/arm/mach-omap2/msdi.c index 9e57b4aadb06..a6020d750431 100644 --- a/arch/arm/mach-omap2/msdi.c +++ b/arch/arm/mach-omap2/msdi.c @@ -27,11 +27,11 @@ #include <plat/omap_hwmod.h> #include <plat/omap_device.h> -#include <plat/mmc.h> #include "common.h" #include "control.h" #include "mux.h" +#include "mmc.h" /* * MSDI_CON_OFFSET: offset in bytes of the MSDI IP block's CON register diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index e1f289748c5d..de89d382f52c 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -27,12 +27,12 @@ #include <plat/sram.h> #include <plat/omap-secure.h> -#include <plat/mmc.h> #include "omap-wakeupgen.h" #include "soc.h" #include "common.h" +#include "mmc.h" #include "hsmmc.h" #include "omap4-sar-layout.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index b5db6007c523..80bbbee57649 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -15,18 +15,18 @@ #include <linux/platform_data/spi-omap2-mcspi.h> #include <plat/omap_hwmod.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/serial.h> #include <plat/i2c.h> #include <plat/dmtimer.h> #include "l3_2xxx.h" #include "l4_2xxx.h" -#include <plat/mmc.h> #include "omap_hwmod_common_data.h" #include "cm-regbits-24xx.h" #include "prm-regbits-24xx.h" +#include "mmc.h" #include "wd_timer.h" /* diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index c455e41b0237..dff04f948a2f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -16,11 +16,11 @@ #include <linux/platform_data/spi-omap2-mcspi.h> #include <plat/omap_hwmod.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/serial.h> #include <plat/i2c.h> #include <plat/dmtimer.h> -#include <plat/mmc.h> +#include "mmc.h" #include "l3_2xxx.h" #include "soc.h" diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index 8851bbb6bb24..2420097d29f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -11,11 +11,12 @@ */ #include <plat/omap_hwmod.h> #include <plat/serial.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/common.h> #include "hdq1w.h" #include "omap_hwmod_common_data.h" +#include "dma.h" /* UART */ diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index bd9220ed5ab9..b9024868774c 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -11,7 +11,7 @@ #include <plat/omap_hwmod.h> #include <plat/serial.h> #include <linux/platform_data/gpio-omap.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/dmtimer.h> #include <linux/platform_data/spi-omap2-mcspi.h> diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c index 59d5c1cd316d..44a661882a7e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c @@ -18,8 +18,6 @@ #include <plat/cpu.h> #include <linux/platform_data/gpio-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <plat/dma.h> -#include <plat/mmc.h> #include <plat/i2c.h> #include "omap_hwmod_common_data.h" @@ -28,6 +26,7 @@ #include "cm33xx.h" #include "prm33xx.h" #include "prm-regbits-33xx.h" +#include "mmc.h" /* * IP blocks diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index f67b7ee07dd4..2aaf3ce80626 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -18,12 +18,11 @@ #include <linux/platform_data/gpio-omap.h> #include <plat/omap_hwmod.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/serial.h> #include "l3_3xxx.h" #include "l4_3xxx.h" #include <plat/i2c.h> -#include <plat/mmc.h> #include <linux/platform_data/asoc-ti-mcbsp.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <plat/dmtimer.h> @@ -35,6 +34,9 @@ #include "omap_hwmod_common_data.h" #include "prm-regbits-34xx.h" #include "cm-regbits-34xx.h" + +#include "dma.h" +#include "mmc.h" #include "wd_timer.h" /* diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 652d0285bd6d..f47a57fa1f3a 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -24,10 +24,9 @@ #include <plat/omap_hwmod.h> #include <plat/i2c.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <linux/platform_data/spi-omap2-mcspi.h> #include <linux/platform_data/asoc-ti-mcbsp.h> -#include <plat/mmc.h> #include <plat/dmtimer.h> #include <plat/common.h> #include <plat/iommu.h> @@ -37,6 +36,7 @@ #include "cm2_44xx.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" +#include "mmc.h" #include "wd_timer.h" /* Base offset for all OMAP4 interrupts external to MPUSS */ diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index 8af6cd6ac331..601a49bc264c 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -38,7 +38,7 @@ #include <plat/clock.h> #include <plat/sram.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include "common.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index ee0bffc614be..bbe15cb1b874 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -39,12 +39,12 @@ #include "clockdomain.h" #include "powerdomain.h" #include <plat/prcm.h> -#include <plat/gpmc.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include "common.h" #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" +#include "gpmc.h" #include "prm-regbits-34xx.h" #include "prm2xxx_3xxx.h" diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 0405c8190803..67c41961fa42 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -29,7 +29,7 @@ #include <plat/omap-serial.h> #include "common.h" -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> #include <plat/omap-pm.h> diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 805bea6edf17..6064425ed47b 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -18,7 +18,7 @@ #include <linux/usb/musb.h> -#include <plat/gpmc.h> +#include "gpmc.h" #include "mux.h" diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c index 111315a69354..b388e87b522b 100644 --- a/arch/arm/plat-omap/common.c +++ b/arch/arm/plat-omap/common.c @@ -19,7 +19,7 @@ #include <plat/common.h> #include <plat/vram.h> #include <linux/platform_data/dsp-omap.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/omap-secure.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c76ed8bff838..b729623f2967 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -37,7 +37,7 @@ #include <linux/delay.h> #include <plat/cpu.h> -#include <plat/dma.h> +#include <plat-omap/dma-omap.h> #include <plat/tc.h> /* diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat-omap/dma-omap.h index 0a87b052f8f7..222be7e934e5 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat-omap/dma-omap.h @@ -1,5 +1,5 @@ /* - * arch/arm/plat-omap/include/mach/dma.h + * OMAP DMA handling defines and function * * Copyright (C) 2003 Nokia Corporation * Author: Juha Yrjölä <juha.yrjola@nokia.com> @@ -23,187 +23,8 @@ #include <linux/platform_device.h> -/* - * TODO: These dma channel defines should go away once all - * the omap drivers hwmod adapted. - */ - -/* Move omap4 specific defines to dma-44xx.h */ -#include "dma-44xx.h" - #define INT_DMA_LCD 25 -/* DMA channels for omap1 */ -#define OMAP_DMA_NO_DEVICE 0 -#define OMAP_DMA_MCSI1_TX 1 -#define OMAP_DMA_MCSI1_RX 2 -#define OMAP_DMA_I2C_RX 3 -#define OMAP_DMA_I2C_TX 4 -#define OMAP_DMA_EXT_NDMA_REQ 5 -#define OMAP_DMA_EXT_NDMA_REQ2 6 -#define OMAP_DMA_UWIRE_TX 7 -#define OMAP_DMA_MCBSP1_TX 8 -#define OMAP_DMA_MCBSP1_RX 9 -#define OMAP_DMA_MCBSP3_TX 10 -#define OMAP_DMA_MCBSP3_RX 11 -#define OMAP_DMA_UART1_TX 12 -#define OMAP_DMA_UART1_RX 13 -#define OMAP_DMA_UART2_TX 14 -#define OMAP_DMA_UART2_RX 15 -#define OMAP_DMA_MCBSP2_TX 16 -#define OMAP_DMA_MCBSP2_RX 17 -#define OMAP_DMA_UART3_TX 18 -#define OMAP_DMA_UART3_RX 19 -#define OMAP_DMA_CAMERA_IF_RX 20 -#define OMAP_DMA_MMC_TX 21 -#define OMAP_DMA_MMC_RX 22 -#define OMAP_DMA_NAND 23 -#define OMAP_DMA_IRQ_LCD_LINE 24 -#define OMAP_DMA_MEMORY_STICK 25 -#define OMAP_DMA_USB_W2FC_RX0 26 -#define OMAP_DMA_USB_W2FC_RX1 27 -#define OMAP_DMA_USB_W2FC_RX2 28 -#define OMAP_DMA_USB_W2FC_TX0 29 -#define OMAP_DMA_USB_W2FC_TX1 30 -#define OMAP_DMA_USB_W2FC_TX2 31 - -/* These are only for 1610 */ -#define OMAP_DMA_CRYPTO_DES_IN 32 -#define OMAP_DMA_SPI_TX 33 -#define OMAP_DMA_SPI_RX 34 -#define OMAP_DMA_CRYPTO_HASH 35 -#define OMAP_DMA_CCP_ATTN 36 -#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37 -#define OMAP_DMA_CMT_APE_TX_CHAN_0 38 -#define OMAP_DMA_CMT_APE_RV_CHAN_0 39 -#define OMAP_DMA_CMT_APE_TX_CHAN_1 40 -#define OMAP_DMA_CMT_APE_RV_CHAN_1 41 -#define OMAP_DMA_CMT_APE_TX_CHAN_2 42 -#define OMAP_DMA_CMT_APE_RV_CHAN_2 43 -#define OMAP_DMA_CMT_APE_TX_CHAN_3 44 -#define OMAP_DMA_CMT_APE_RV_CHAN_3 45 -#define OMAP_DMA_CMT_APE_TX_CHAN_4 46 -#define OMAP_DMA_CMT_APE_RV_CHAN_4 47 -#define OMAP_DMA_CMT_APE_TX_CHAN_5 48 -#define OMAP_DMA_CMT_APE_RV_CHAN_5 49 -#define OMAP_DMA_CMT_APE_TX_CHAN_6 50 -#define OMAP_DMA_CMT_APE_RV_CHAN_6 51 -#define OMAP_DMA_CMT_APE_TX_CHAN_7 52 -#define OMAP_DMA_CMT_APE_RV_CHAN_7 53 -#define OMAP_DMA_MMC2_TX 54 -#define OMAP_DMA_MMC2_RX 55 -#define OMAP_DMA_CRYPTO_DES_OUT 56 - -/* DMA channels for 24xx */ -#define OMAP24XX_DMA_NO_DEVICE 0 -#define OMAP24XX_DMA_XTI_DMA 1 /* S_DMA_0 */ -#define OMAP24XX_DMA_EXT_DMAREQ0 2 /* S_DMA_1 */ -#define OMAP24XX_DMA_EXT_DMAREQ1 3 /* S_DMA_2 */ -#define OMAP24XX_DMA_GPMC 4 /* S_DMA_3 */ -#define OMAP24XX_DMA_GFX 5 /* S_DMA_4 */ -#define OMAP24XX_DMA_DSS 6 /* S_DMA_5 */ -#define OMAP242X_DMA_VLYNQ_TX 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_EXT_DMAREQ2 7 /* S_DMA_6 */ -#define OMAP24XX_DMA_CWT 8 /* S_DMA_7 */ -#define OMAP24XX_DMA_AES_TX 9 /* S_DMA_8 */ -#define OMAP24XX_DMA_AES_RX 10 /* S_DMA_9 */ -#define OMAP24XX_DMA_DES_TX 11 /* S_DMA_10 */ -#define OMAP24XX_DMA_DES_RX 12 /* S_DMA_11 */ -#define OMAP24XX_DMA_SHA1MD5_RX 13 /* S_DMA_12 */ -#define OMAP34XX_DMA_SHA2MD5_RX 13 /* S_DMA_12 */ -#define OMAP242X_DMA_EXT_DMAREQ2 14 /* S_DMA_13 */ -#define OMAP242X_DMA_EXT_DMAREQ3 15 /* S_DMA_14 */ -#define OMAP242X_DMA_EXT_DMAREQ4 16 /* S_DMA_15 */ -#define OMAP242X_DMA_EAC_AC_RD 17 /* S_DMA_16 */ -#define OMAP242X_DMA_EAC_AC_WR 18 /* S_DMA_17 */ -#define OMAP242X_DMA_EAC_MD_UL_RD 19 /* S_DMA_18 */ -#define OMAP242X_DMA_EAC_MD_UL_WR 20 /* S_DMA_19 */ -#define OMAP242X_DMA_EAC_MD_DL_RD 21 /* S_DMA_20 */ -#define OMAP242X_DMA_EAC_MD_DL_WR 22 /* S_DMA_21 */ -#define OMAP242X_DMA_EAC_BT_UL_RD 23 /* S_DMA_22 */ -#define OMAP242X_DMA_EAC_BT_UL_WR 24 /* S_DMA_23 */ -#define OMAP242X_DMA_EAC_BT_DL_RD 25 /* S_DMA_24 */ -#define OMAP242X_DMA_EAC_BT_DL_WR 26 /* S_DMA_25 */ -#define OMAP243X_DMA_EXT_DMAREQ3 14 /* S_DMA_13 */ -#define OMAP24XX_DMA_SPI3_TX0 15 /* S_DMA_14 */ -#define OMAP24XX_DMA_SPI3_RX0 16 /* S_DMA_15 */ -#define OMAP24XX_DMA_MCBSP3_TX 17 /* S_DMA_16 */ -#define OMAP24XX_DMA_MCBSP3_RX 18 /* S_DMA_17 */ -#define OMAP24XX_DMA_MCBSP4_TX 19 /* S_DMA_18 */ -#define OMAP24XX_DMA_MCBSP4_RX 20 /* S_DMA_19 */ -#define OMAP24XX_DMA_MCBSP5_TX 21 /* S_DMA_20 */ -#define OMAP24XX_DMA_MCBSP5_RX 22 /* S_DMA_21 */ -#define OMAP24XX_DMA_SPI3_TX1 23 /* S_DMA_22 */ -#define OMAP24XX_DMA_SPI3_RX1 24 /* S_DMA_23 */ -#define OMAP243X_DMA_EXT_DMAREQ4 25 /* S_DMA_24 */ -#define OMAP243X_DMA_EXT_DMAREQ5 26 /* S_DMA_25 */ -#define OMAP34XX_DMA_I2C3_TX 25 /* S_DMA_24 */ -#define OMAP34XX_DMA_I2C3_RX 26 /* S_DMA_25 */ -#define OMAP24XX_DMA_I2C1_TX 27 /* S_DMA_26 */ -#define OMAP24XX_DMA_I2C1_RX 28 /* S_DMA_27 */ -#define OMAP24XX_DMA_I2C2_TX 29 /* S_DMA_28 */ -#define OMAP24XX_DMA_I2C2_RX 30 /* S_DMA_29 */ -#define OMAP24XX_DMA_MCBSP1_TX 31 /* S_DMA_30 */ -#define OMAP24XX_DMA_MCBSP1_RX 32 /* S_DMA_31 */ -#define OMAP24XX_DMA_MCBSP2_TX 33 /* S_DMA_32 */ -#define OMAP24XX_DMA_MCBSP2_RX 34 /* S_DMA_33 */ -#define OMAP24XX_DMA_SPI1_TX0 35 /* S_DMA_34 */ -#define OMAP24XX_DMA_SPI1_RX0 36 /* S_DMA_35 */ -#define OMAP24XX_DMA_SPI1_TX1 37 /* S_DMA_36 */ -#define OMAP24XX_DMA_SPI1_RX1 38 /* S_DMA_37 */ -#define OMAP24XX_DMA_SPI1_TX2 39 /* S_DMA_38 */ -#define OMAP24XX_DMA_SPI1_RX2 40 /* S_DMA_39 */ -#define OMAP24XX_DMA_SPI1_TX3 41 /* S_DMA_40 */ -#define OMAP24XX_DMA_SPI1_RX3 42 /* S_DMA_41 */ -#define OMAP24XX_DMA_SPI2_TX0 43 /* S_DMA_42 */ -#define OMAP24XX_DMA_SPI2_RX0 44 /* S_DMA_43 */ -#define OMAP24XX_DMA_SPI2_TX1 45 /* S_DMA_44 */ -#define OMAP24XX_DMA_SPI2_RX1 46 /* S_DMA_45 */ -#define OMAP24XX_DMA_MMC2_TX 47 /* S_DMA_46 */ -#define OMAP24XX_DMA_MMC2_RX 48 /* S_DMA_47 */ -#define OMAP24XX_DMA_UART1_TX 49 /* S_DMA_48 */ -#define OMAP24XX_DMA_UART1_RX 50 /* S_DMA_49 */ -#define OMAP24XX_DMA_UART2_TX 51 /* S_DMA_50 */ -#define OMAP24XX_DMA_UART2_RX 52 /* S_DMA_51 */ -#define OMAP24XX_DMA_UART3_TX 53 /* S_DMA_52 */ -#define OMAP24XX_DMA_UART3_RX 54 /* S_DMA_53 */ -#define OMAP24XX_DMA_USB_W2FC_TX0 55 /* S_DMA_54 */ -#define OMAP24XX_DMA_USB_W2FC_RX0 56 /* S_DMA_55 */ -#define OMAP24XX_DMA_USB_W2FC_TX1 57 /* S_DMA_56 */ -#define OMAP24XX_DMA_USB_W2FC_RX1 58 /* S_DMA_57 */ -#define OMAP24XX_DMA_USB_W2FC_TX2 59 /* S_DMA_58 */ -#define OMAP24XX_DMA_USB_W2FC_RX2 60 /* S_DMA_59 */ -#define OMAP24XX_DMA_MMC1_TX 61 /* S_DMA_60 */ -#define OMAP24XX_DMA_MMC1_RX 62 /* S_DMA_61 */ -#define OMAP24XX_DMA_MS 63 /* S_DMA_62 */ -#define OMAP242X_DMA_EXT_DMAREQ5 64 /* S_DMA_63 */ -#define OMAP243X_DMA_EXT_DMAREQ6 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_EXT_DMAREQ3 64 /* S_DMA_63 */ -#define OMAP34XX_DMA_AES2_TX 65 /* S_DMA_64 */ -#define OMAP34XX_DMA_AES2_RX 66 /* S_DMA_65 */ -#define OMAP34XX_DMA_DES2_TX 67 /* S_DMA_66 */ -#define OMAP34XX_DMA_DES2_RX 68 /* S_DMA_67 */ -#define OMAP34XX_DMA_SHA1MD5_RX 69 /* S_DMA_68 */ -#define OMAP34XX_DMA_SPI4_TX0 70 /* S_DMA_69 */ -#define OMAP34XX_DMA_SPI4_RX0 71 /* S_DMA_70 */ -#define OMAP34XX_DSS_DMA0 72 /* S_DMA_71 */ -#define OMAP34XX_DSS_DMA1 73 /* S_DMA_72 */ -#define OMAP34XX_DSS_DMA2 74 /* S_DMA_73 */ -#define OMAP34XX_DSS_DMA3 75 /* S_DMA_74 */ -#define OMAP34XX_DMA_MMC3_TX 77 /* S_DMA_76 */ -#define OMAP34XX_DMA_MMC3_RX 78 /* S_DMA_77 */ -#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */ -#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */ - -#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ -#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ - -/* Only for AM35xx */ -#define AM35XX_DMA_UART4_TX 54 -#define AM35XX_DMA_UART4_RX 55 - -/*----------------------------------------------------------------------------*/ - #define OMAP1_DMA_TOUT_IRQ (1 << 0) #define OMAP_DMA_DROP_IRQ (1 << 1) #define OMAP_DMA_HALF_IRQ (1 << 2) diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h deleted file mode 100644 index 1f767cb2f38a..000000000000 --- a/arch/arm/plat-omap/include/plat/dma-44xx.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * OMAP4 SDMA channel definitions - * - * Copyright (C) 2009-2010 Texas Instruments, Inc. - * Copyright (C) 2009-2010 Nokia Corporation - * - * Santosh Shilimkar (santosh.shilimkar@ti.com) - * Benoit Cousson (b-cousson@ti.com) - * Paul Walmsley (paul@pwsan.com) - * - * This file is automatically generated from the OMAP hardware databases. - * We respectfully ask that any modifications to this file be coordinated - * with the public linux-omap@vger.kernel.org mailing list and the - * authors above to ensure that the autogeneration scripts are kept - * up-to-date with the file contents. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H -#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H - -#define OMAP44XX_DMA_SYS_REQ0 2 -#define OMAP44XX_DMA_SYS_REQ1 3 -#define OMAP44XX_DMA_GPMC 4 -#define OMAP44XX_DMA_DSS_DISPC_REQ 6 -#define OMAP44XX_DMA_SYS_REQ2 7 -#define OMAP44XX_DMA_MCASP1_AXEVT 8 -#define OMAP44XX_DMA_ISS_REQ1 9 -#define OMAP44XX_DMA_ISS_REQ2 10 -#define OMAP44XX_DMA_MCASP1_AREVT 11 -#define OMAP44XX_DMA_ISS_REQ3 12 -#define OMAP44XX_DMA_ISS_REQ4 13 -#define OMAP44XX_DMA_DSS_RFBI_REQ 14 -#define OMAP44XX_DMA_SPI3_TX0 15 -#define OMAP44XX_DMA_SPI3_RX0 16 -#define OMAP44XX_DMA_MCBSP2_TX 17 -#define OMAP44XX_DMA_MCBSP2_RX 18 -#define OMAP44XX_DMA_MCBSP3_TX 19 -#define OMAP44XX_DMA_MCBSP3_RX 20 -#define OMAP44XX_DMA_C2C_SSCM_GPO0 21 -#define OMAP44XX_DMA_C2C_SSCM_GPO1 22 -#define OMAP44XX_DMA_SPI3_TX1 23 -#define OMAP44XX_DMA_SPI3_RX1 24 -#define OMAP44XX_DMA_I2C3_TX 25 -#define OMAP44XX_DMA_I2C3_RX 26 -#define OMAP44XX_DMA_I2C1_TX 27 -#define OMAP44XX_DMA_I2C1_RX 28 -#define OMAP44XX_DMA_I2C2_TX 29 -#define OMAP44XX_DMA_I2C2_RX 30 -#define OMAP44XX_DMA_MCBSP4_TX 31 -#define OMAP44XX_DMA_MCBSP4_RX 32 -#define OMAP44XX_DMA_MCBSP1_TX 33 -#define OMAP44XX_DMA_MCBSP1_RX 34 -#define OMAP44XX_DMA_SPI1_TX0 35 -#define OMAP44XX_DMA_SPI1_RX0 36 -#define OMAP44XX_DMA_SPI1_TX1 37 -#define OMAP44XX_DMA_SPI1_RX1 38 -#define OMAP44XX_DMA_SPI1_TX2 39 -#define OMAP44XX_DMA_SPI1_RX2 40 -#define OMAP44XX_DMA_SPI1_TX3 41 -#define OMAP44XX_DMA_SPI1_RX3 42 -#define OMAP44XX_DMA_SPI2_TX0 43 -#define OMAP44XX_DMA_SPI2_RX0 44 -#define OMAP44XX_DMA_SPI2_TX1 45 -#define OMAP44XX_DMA_SPI2_RX1 46 -#define OMAP44XX_DMA_MMC2_TX 47 -#define OMAP44XX_DMA_MMC2_RX 48 -#define OMAP44XX_DMA_UART1_TX 49 -#define OMAP44XX_DMA_UART1_RX 50 -#define OMAP44XX_DMA_UART2_TX 51 -#define OMAP44XX_DMA_UART2_RX 52 -#define OMAP44XX_DMA_UART3_TX 53 -#define OMAP44XX_DMA_UART3_RX 54 -#define OMAP44XX_DMA_UART4_TX 55 -#define OMAP44XX_DMA_UART4_RX 56 -#define OMAP44XX_DMA_MMC4_TX 57 -#define OMAP44XX_DMA_MMC4_RX 58 -#define OMAP44XX_DMA_MMC5_TX 59 -#define OMAP44XX_DMA_MMC5_RX 60 -#define OMAP44XX_DMA_MMC1_TX 61 -#define OMAP44XX_DMA_MMC1_RX 62 -#define OMAP44XX_DMA_SYS_REQ3 64 -#define OMAP44XX_DMA_MCPDM_UP 65 -#define OMAP44XX_DMA_MCPDM_DL 66 -#define OMAP44XX_DMA_DMIC_REQ 67 -#define OMAP44XX_DMA_C2C_SSCM_GPO2 68 -#define OMAP44XX_DMA_C2C_SSCM_GPO3 69 -#define OMAP44XX_DMA_SPI4_TX0 70 -#define OMAP44XX_DMA_SPI4_RX0 71 -#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 -#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 -#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 -#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 -#define OMAP44XX_DMA_DSS_HDMI_REQ 76 -#define OMAP44XX_DMA_MMC3_TX 77 -#define OMAP44XX_DMA_MMC3_RX 78 -#define OMAP44XX_DMA_USIM_TX 79 -#define OMAP44XX_DMA_USIM_RX 80 -#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 -#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 -#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 -#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 -#define OMAP44XX_DMA_SLIMBUS1_TX0 85 -#define OMAP44XX_DMA_SLIMBUS1_TX1 86 -#define OMAP44XX_DMA_SLIMBUS1_TX2 87 -#define OMAP44XX_DMA_SLIMBUS1_TX3 88 -#define OMAP44XX_DMA_SLIMBUS1_RX0 89 -#define OMAP44XX_DMA_SLIMBUS1_RX1 90 -#define OMAP44XX_DMA_SLIMBUS1_RX2 91 -#define OMAP44XX_DMA_SLIMBUS1_RX3 92 -#define OMAP44XX_DMA_SLIMBUS2_TX0 93 -#define OMAP44XX_DMA_SLIMBUS2_TX1 94 -#define OMAP44XX_DMA_SLIMBUS2_TX2 95 -#define OMAP44XX_DMA_SLIMBUS2_TX3 96 -#define OMAP44XX_DMA_SLIMBUS2_RX0 97 -#define OMAP44XX_DMA_SLIMBUS2_RX1 98 -#define OMAP44XX_DMA_SLIMBUS2_RX2 99 -#define OMAP44XX_DMA_SLIMBUS2_RX3 100 -#define OMAP44XX_DMA_ABE_REQ_0 101 -#define OMAP44XX_DMA_ABE_REQ_1 102 -#define OMAP44XX_DMA_ABE_REQ_2 103 -#define OMAP44XX_DMA_ABE_REQ_3 104 -#define OMAP44XX_DMA_ABE_REQ_4 105 -#define OMAP44XX_DMA_ABE_REQ_5 106 -#define OMAP44XX_DMA_ABE_REQ_6 107 -#define OMAP44XX_DMA_ABE_REQ_7 108 -#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109 -#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110 -#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111 -#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112 -#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113 -#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114 -#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115 -#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116 -#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117 -#define OMAP44XX_DMA_SHA2_CTXIN_P 118 -#define OMAP44XX_DMA_SHA2_DIN_P 119 -#define OMAP44XX_DMA_SHA2_CTXOUT_P 120 -#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121 -#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122 -#define OMAP44XX_DMA_I2C4_TX 124 -#define OMAP44XX_DMA_I2C4_RX 125 - -#endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h deleted file mode 100644 index 8b4e4f2da2f5..000000000000 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ /dev/null @@ -1,188 +0,0 @@ -/* - * MMC definitions for OMAP2 - * - * Copyright (C) 2006 Nokia Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __OMAP2_MMC_H -#define __OMAP2_MMC_H - -#include <linux/types.h> -#include <linux/device.h> -#include <linux/mmc/host.h> - -#include <plat/omap_hwmod.h> - -#define OMAP15XX_NR_MMC 1 -#define OMAP16XX_NR_MMC 2 -#define OMAP1_MMC_SIZE 0x080 -#define OMAP1_MMC1_BASE 0xfffb7800 -#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */ - -#define OMAP24XX_NR_MMC 2 -#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE -#define OMAP2_MMC1_BASE 0x4809c000 - -#define OMAP4_MMC_REG_OFFSET 0x100 - -#define OMAP_MMC_MAX_SLOTS 2 - -/* - * struct omap_mmc_dev_attr.flags possibilities - * - * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can - * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag - * should be set if this is the case. See for example Section 22.5.3 - * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia - * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R). - * - * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers - * don't work correctly on some MMC controller instances on some - * OMAP3 SoCs; this flag should be set if this is the case. See - * for example Advisory 2.1.1.128 "MMC: Multiple Block Read - * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_ - * Revision F (October 2010) (SPRZ278F). - */ -#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0) -#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1) - -struct omap_mmc_dev_attr { - u8 flags; -}; - -struct omap_mmc_platform_data { - /* back-link to device */ - struct device *dev; - - /* number of slots per controller */ - unsigned nr_slots:2; - - /* set if your board has components or wiring that limits the - * maximum frequency on the MMC bus */ - unsigned int max_freq; - - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); - /* initialize board-specific MMC functionality, can be NULL if - * not supported */ - int (*init)(struct device *dev); - void (*cleanup)(struct device *dev); - void (*shutdown)(struct device *dev); - - /* To handle board related suspend/resume functionality for MMC */ - int (*suspend)(struct device *dev, int slot); - int (*resume)(struct device *dev, int slot); - - /* Return context loss count due to PM states changing */ - int (*get_context_loss_count)(struct device *dev); - - /* Integrating attributes from the omap_hwmod layer */ - u8 controller_flags; - - /* Register offset deviation */ - u16 reg_offset; - - struct omap_mmc_slot_data { - - /* - * 4/8 wires and any additional host capabilities - * need to OR'd all capabilities (ref. linux/mmc/host.h) - */ - u8 wires; /* Used for the MMC driver on omap1 and 2420 */ - u32 caps; /* Used for the MMC driver on 2430 and later */ - u32 pm_caps; /* PM capabilities of the mmc */ - - /* - * nomux means "standard" muxing is wrong on this board, and - * that board-specific code handled it before common init logic. - */ - unsigned nomux:1; - - /* switch pin can be for card detect (default) or card cover */ - unsigned cover:1; - - /* use the internal clock */ - unsigned internal_clock:1; - - /* nonremovable e.g. eMMC */ - unsigned nonremovable:1; - - /* Try to sleep or power off when possible */ - unsigned power_saving:1; - - /* If using power_saving and the MMC power is not to go off */ - unsigned no_off:1; - - /* eMMC does not handle power off when not in sleep state */ - unsigned no_regulator_off_init:1; - - /* Regulator off remapped to sleep */ - unsigned vcc_aux_disable_is_sleep:1; - - /* we can put the features above into this variable */ -#define HSMMC_HAS_PBIAS (1 << 0) -#define HSMMC_HAS_UPDATED_RESET (1 << 1) - unsigned features; - - int switch_pin; /* gpio (card detect) */ - int gpio_wp; /* gpio (write protect) */ - - int (*set_bus_mode)(struct device *dev, int slot, int bus_mode); - int (*set_power)(struct device *dev, int slot, - int power_on, int vdd); - int (*get_ro)(struct device *dev, int slot); - void (*remux)(struct device *dev, int slot, int power_on); - /* Call back before enabling / disabling regulators */ - void (*before_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* Call back after enabling / disabling regulators */ - void (*after_set_reg)(struct device *dev, int slot, - int power_on, int vdd); - /* if we have special card, init it using this callback */ - void (*init_card)(struct mmc_card *card); - - /* return MMC cover switch state, can be NULL if not supported. - * - * possible return values: - * 0 - closed - * 1 - open - */ - int (*get_cover_state)(struct device *dev, int slot); - - const char *name; - u32 ocr_mask; - - /* Card detection IRQs */ - int card_detect_irq; - int (*card_detect)(struct device *dev, int slot); - - unsigned int ban_openended:1; - - } slots[OMAP_MMC_MAX_SLOTS]; -}; - -/* called from board-specific card detection service routine */ -extern void omap_mmc_notify_cover_event(struct device *dev, int slot, - int is_closed); - -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) -void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers); -void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); -#else -static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, - int nr_controllers) -{ -} -static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) -{ -} -#endif - -extern int omap_msdi_reset(struct omap_hwmod *oh); - -#endif |