diff options
Diffstat (limited to 'arch')
70 files changed, 5939 insertions, 928 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 992a347d51de..7f945eafe165 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -351,7 +351,8 @@ dtb-$(CONFIG_SOC_IMX27) += \ imx27-phytec-phycore-rdk.dtb \ imx27-phytec-phycard-s-rdk.dtb dtb-$(CONFIG_SOC_IMX31) += \ - imx31-bug.dtb + imx31-bug.dtb \ + imx31-lite.dtb dtb-$(CONFIG_SOC_IMX35) += \ imx35-eukrea-mbimxsd35-baseboard.dtb \ imx35-pdk.dtb @@ -364,10 +365,14 @@ dtb-$(CONFIG_SOC_IMX51) += \ imx51-digi-connectcore-jsk.dtb \ imx51-eukrea-mbimxsd51-baseboard.dtb \ imx51-ts4800.dtb \ - imx51-zii-rdu1.dtb + imx51-zii-rdu1.dtb \ + imx51-zii-scu2-mezz.dtb \ + imx51-zii-scu3-esb.dtb dtb-$(CONFIG_SOC_IMX53) += \ imx53-ard.dtb \ imx53-cx9020.dtb \ + imx53-kp-ddc.dtb \ + imx53-kp-hsc.dtb \ imx53-m53evk.dtb \ imx53-mba53.dtb \ imx53-ppd.dtb \ @@ -406,6 +411,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-hummingboard2-emmc-som-v15.dtb \ imx6dl-hummingboard2-som-v15.dtb \ imx6dl-icore.dtb \ + imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ imx6dl-mamoj.dtb \ imx6dl-nit6xlite.dtb \ @@ -527,6 +533,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ dtb-$(CONFIG_SOC_IMX6SL) += \ imx6sl-evk.dtb \ imx6sl-warp.dtb +dtb-$(CONFIG_SOC_IMX6SLL) += \ + imx6sll-evk.dtb dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-nitrogen6sx.dtb \ imx6sx-sabreauto.dtb \ @@ -539,6 +547,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ imx6sx-udoo-neo-full.dtb dtb-$(CONFIG_SOC_IMX6UL) += \ imx6ul-14x14-evk.dtb \ + imx6ul-ccimx6ulsbcexpress.dtb \ imx6ul-geam.dtb \ imx6ul-isiot-emmc.dtb \ imx6ul-isiot-nand.dtb \ @@ -573,8 +582,10 @@ dtb-$(CONFIG_SOC_VF610) += \ vf610-cosmic.dtb \ vf610m4-cosmic.dtb \ vf610-twr.dtb \ + vf610-zii-cfu1.dtb \ vf610-zii-dev-rev-b.dtb \ - vf610-zii-dev-rev-c.dtb + vf610-zii-dev-rev-c.dtb \ + vf610-zii-ssmb-spu3.dtb dtb-$(CONFIG_ARCH_MXS) += \ imx23-evk.dtb \ imx23-olinuxino.dtb \ diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts new file mode 100644 index 000000000000..db52ddccabc3 --- /dev/null +++ b/arch/arm/boot/dts/imx31-lite.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com> + +/dts-v1/; + +#include "imx31.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + model = "LogicPD i.MX31 Lite"; + compatible = "logicpd,imx31-lite", "fsl,imx31"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x8000000>; + }; + + leds { + compatible = "gpio-leds"; + + led0 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + }; + + led1 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ata { + status = "okay"; +}; + +&nfc { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&spi2 { + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13783"; + reg = <0>; + spi-cs-high; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio1>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + + fsl,mc13xxx-uses-adc; + fsl,mc13xxx-uses-rtc; + + regulators { + sw1a { /* QVCC */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + sw1b { /* QVCC */ + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2a { /* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + sw2b { /* NVCC10 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + violo { /* NVCC1 and NVCC7 */ + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + viohi { /* VIOHI */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vaudio { /* VAUDIO */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vcam { /* NVCC4 */ + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + vgen { /* NVCC5 / NVCC8 and NVCC6 / NVCC9 */ + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + regulator-always-on; + regulator-boot-on; + }; + + vmmc2 { /* NVCC3 */ + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; +}; + +&uart1 { + uart-has-rtscts; + status = "okay"; +}; + +/* Routed to the extension board */ +&uart2 { + uart-has-rtscts; + status = "okay"; +}; + +/* Routed to the extension board */ +&uart3 { + uart-has-rtscts; + status = "okay"; +}; + +&weim { + status = "okay"; + + nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0x0 0x200000>; + bank-width = <2>; + linux,mtd-name = "physmap-flash.0"; + fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>; + }; + + ethernet@4,0 { + compatible = "smsc,lan9117", "smsc,lan9115"; + reg = <4 0x0 0x100>; + interrupt-parent = <&gpio1>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + phy-mode = "mii"; + reg-io-width = <2>; + smsc,irq-push-pull; + fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>; + }; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index 4642c8169a65..ca1419ca303c 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -1,5 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ // +// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com> // Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> / { @@ -15,11 +16,20 @@ memory { device_type = "memory"; }; aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; serial3 = &uart4; serial4 = &uart5; + spi0 = &spi1; + spi1 = &spi2; + spi2 = &spi3; }; cpus { @@ -47,6 +57,14 @@ interrupt-parent = <&avic>; ranges; + iram: iram@1fffc000 { + compatible = "mmio-sram"; + reg = <0x1fffc000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1fffc000 0x4000>; + }; + aips@43f00000 { /* AIPS1 */ compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; @@ -54,6 +72,34 @@ reg = <0x43f00000 0x100000>; ranges; + i2c1: i2c@43f80000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f80000 0x4000>; + interrupts = <10>; + clocks = <&clks 33>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@43f84000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f84000 0x4000>; + interrupts = <3>; + clocks = <&clks 35>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ata: ata@43f8c000 { + compatible = "fsl,imx31-pata", "fsl,imx27-pata"; + reg = <0x43f8c000 0x4000>; + interrupts = <15>; + clocks = <&clks 26>; + status = "disabled"; + }; + uart1: serial@43f90000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x43f90000 0x4000>; @@ -72,6 +118,29 @@ status = "disabled"; }; + i2c2: i2c@43f98000 { + compatible = "fsl,imx31-i2c", "fsl,imx21-i2c"; + reg = <0x43f98000 0x4000>; + interrupts = <4>; + clocks = <&clks 34>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@43fa4000 { + compatible = "fsl,imx31-cspi"; + reg = <0x43fa4000 0x4000>; + interrupts = <14>; + clocks = <&clks 10>, <&clks 53>; + clock-names = "ipg", "per"; + dmas = <&sdma 8 8 0>, <&sdma 9 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + kpp: kpp@43fa8000 { compatible = "fsl,imx31-kpp", "fsl,imx21-kpp"; reg = <0x43fa8000 0x4000>; @@ -106,6 +175,28 @@ reg = <0x50000000 0x100000>; ranges; + sdhci1: sdhci@50004000 { + compatible = "fsl,imx31-mmc"; + reg = <0x50004000 0x4000>; + interrupts = <9>; + clocks = <&clks 10>, <&clks 20>; + clock-names = "ipg", "per"; + dmas = <&sdma 20 3 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + sdhci2: sdhci@50008000 { + compatible = "fsl,imx31-mmc"; + reg = <0x50008000 0x4000>; + interrupts = <8>; + clocks = <&clks 10>, <&clks 21>; + clock-names = "ipg", "per"; + dmas = <&sdma 21 3 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + uart3: serial@5000c000 { compatible = "fsl,imx31-uart", "fsl,imx21-uart"; reg = <0x5000c000 0x4000>; @@ -115,6 +206,19 @@ status = "disabled"; }; + spi2: cspi@50010000 { + compatible = "fsl,imx31-cspi"; + reg = <0x50010000 0x4000>; + interrupts = <13>; + clocks = <&clks 10>, <&clks 54>; + clock-names = "ipg", "per"; + dmas = <&sdma 6 8 0>, <&sdma 7 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + iim: iim@5001c000 { compatible = "fsl,imx31-iim", "fsl,imx27-iim"; reg = <0x5001c000 0x1000>; @@ -137,6 +241,19 @@ #clock-cells = <1>; }; + spi3: cspi@53f84000 { + compatible = "fsl,imx31-cspi"; + reg = <0x53f84000 0x4000>; + interrupts = <17>; + clocks = <&clks 10>, <&clks 28>; + clock-names = "ipg", "per"; + dmas = <&sdma 10 8 0>, <&sdma 11 8 0>; + dma-names = "rx", "tx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gpt: timer@53f90000 { compatible = "fsl,imx31-gpt"; reg = <0x53f90000 0x4000>; @@ -144,6 +261,112 @@ clocks = <&clks 10>, <&clks 22>; clock-names = "ipg", "per"; }; + + gpio3: gpio@53fa4000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fa4000 0x4000>; + interrupts = <56>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rng@53fb0000 { + compatible = "fsl,imx31-rnga"; + reg = <0x53fb0000 0x4000>; + interrupts = <22>; + clocks = <&clks 29>; + }; + + gpio1: gpio@53fcc000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fcc000 0x4000>; + interrupts = <52>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@53fd0000 { + compatible = "fsl,imx31-gpio"; + reg = <0x53fd0000 0x4000>; + interrupts = <51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdma: sdma@53fd4000 { + compatible = "fsl,imx31-sdma"; + reg = <0x53fd4000 0x4000>; + interrupts = <34>; + clocks = <&clks 10>, <&clks 27>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin"; + }; + + rtc: rtc@53fd8000 { + compatible = "fsl,imx31-rtc", "fsl,imx21-rtc"; + reg = <0x53fd8000 0x4000>; + interrupts = <25>; + clocks = <&clks 2>, <&clks 40>; + clock-names = "ref", "ipg"; + }; + + wdog: wdog@53fdc000 { + compatible = "fsl,imx31-wdt", "fsl,imx21-wdt"; + reg = <0x53fdc000 0x4000>; + clocks = <&clks 41>; + }; + + pwm: pwm@53fe0000 { + compatible = "fsl,imx31-pwm", "fsl,imx27-pwm"; + reg = <0x53fe0000 0x4000>; + interrupts = <26>; + clocks = <&clks 10>, <&clks 42>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + + emi@b8000000 { /* External Memory Interface */ + compatible = "simple-bus"; + reg = <0xb8000000 0x5000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + nfc: nand@b8000000 { + compatible = "fsl,imx31-nand", "fsl,imx27-nand"; + reg = <0xb8000000 0x1000>; + interrupts = <33>; + clocks = <&clks 9>; + dmas = <&sdma 30 17 0>; + dma-names = "rx-tx"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + weim: weim@b8002000 { + compatible = "fsl,imx31-weim", "fsl,imx27-weim"; + reg = <0xb8002000 0x1000>; + clocks = <&clks 56>; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xa0000000 0x08000000 + 1 0 0xa8000000 0x08000000 + 2 0 0xb0000000 0x02000000 + 3 0 0xb2000000 0x02000000 + 4 0 0xb4000000 0x02000000 + 5 0 0xb6000000 0x02000000>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index f0622ec4ba9c..682a99783ee6 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -98,14 +98,6 @@ status = "okay"; }; -&usbh2 { - status = "okay"; -}; - -&usbh3 { - status = "okay"; -}; - &usbotg { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h index 97e6e7f4ebdd..43863347362e 100644 --- a/arch/arm/boot/dts/imx50-pinfunc.h +++ b/arch/arm/boot/dts/imx50-pinfunc.h @@ -34,7 +34,7 @@ #define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1 0x02c 0x2d8 0x000 0x2 0x0 #define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7 0x02c 0x2d8 0x000 0x6 0x0 #define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR 0x02c 0x2d8 0x000 0x7 0x0 -#define MX50_PAD_KEY_COL2__KPP_COL_1 0x030 0x2dc 0x000 0x0 0x0 +#define MX50_PAD_KEY_COL2__KPP_COL_2 0x030 0x2dc 0x000 0x0 0x0 #define MX50_PAD_KEY_COL2__GPIO4_4 0x030 0x2dc 0x000 0x1 0x0 #define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2 0x030 0x2dc 0x000 0x2 0x0 #define MX50_PAD_KEY_COL2__CTI_TRIGOUT6 0x030 0x2dc 0x000 0x6 0x0 @@ -44,7 +44,7 @@ #define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3 0x034 0x2e0 0x000 0x2 0x0 #define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7 0x034 0x2e0 0x000 0x6 0x0 #define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0 0x034 0x2e0 0x000 0x7 0x0 -#define MX50_PAD_KEY_COL3__KPP_COL_2 0x038 0x2e4 0x000 0x0 0x0 +#define MX50_PAD_KEY_COL3__KPP_COL_3 0x038 0x2e4 0x000 0x0 0x0 #define MX50_PAD_KEY_COL3__GPIO4_6 0x038 0x2e4 0x000 0x1 0x0 #define MX50_PAD_KEY_COL3__EIM_NANDF_READY0 0x038 0x2e4 0x7b4 0x2 0x0 #define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0 0x038 0x2e4 0x7b8 0x6 0x0 diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index a9b712db9f6c..7fae2ffb76fe 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -209,24 +209,6 @@ status = "disabled"; }; - usbh2: usb@53f80400 { - compatible = "fsl,imx50-usb", "fsl,imx27-usb"; - reg = <0x53f80400 0x0200>; - interrupts = <16>; - clocks = <&clks IMX5_CLK_USBOH3_GATE>; - dr_mode = "host"; - status = "disabled"; - }; - - usbh3: usb@53f80600 { - compatible = "fsl,imx50-usb", "fsl,imx27-usb"; - reg = <0x53f80600 0x0200>; - interrupts = <17>; - clocks = <&clks IMX5_CLK_USBOH3_GATE>; - dr_mode = "host"; - status = "disabled"; - }; - gpio1: gpio@53f84000 { compatible = "fsl,imx50-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index b8ca73d3d379..ba60b0cb3cc1 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -170,20 +170,15 @@ mux-ext-port = <3>; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - usbh1phy: usbh1phy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clk_usb>; - clock-names = "main_clk"; - reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; - vcc-supply = <&vusb_reg>; - #phy-cells = <0>; - }; + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1reg>; + clocks = <&clk_usb>; + clock-names = "main_clk"; + reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; + vcc-supply = <&vusb_reg>; + #phy-cells = <0>; }; }; @@ -401,6 +396,10 @@ status = "okay"; }; +&pmu { + secure-reg-access; +}; + &ssi2 { status = "okay"; }; @@ -429,7 +428,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; vbus-supply = <®_hub_reset>; - fsl,usbphy = <&usbh1phy>; + fsl,usbphy = <&usbphy1>; phy_type = "ulpi"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index b3d952f37cdc..e9e819f2b0b7 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -83,19 +83,12 @@ fsl,mux-ext-port = <3>; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; - - usbh1phy: usbh1phy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX5_CLK_USB_PHY_GATE>; - clock-names = "main_clk"; - clock-frequency = <19200000>; - #phy-cells = <0>; - }; + usbphy1: usbphy1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + #phy-cells = <0>; }; }; @@ -275,7 +268,7 @@ &usbh1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbh1>; - fsl,usbphy = <&usbh1phy>; + fsl,usbphy = <&usbphy1>; dr_mode = "host"; phy_type = "ulpi"; status = "okay"; diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts index df9eca94d812..60b4d71c0dfe 100644 --- a/arch/arm/boot/dts/imx51-zii-rdu1.dts +++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts @@ -476,6 +476,17 @@ status = "okay"; }; +&gpio1 { + unused-sd3-wp-gpio { + /* + * See pinctrl_esdhc1 below for more details on this + */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; @@ -542,7 +553,7 @@ rmi4-f11@11 { reg = <0x11>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; @@ -554,6 +565,10 @@ remote-endpoint = <&display_in>; }; +&pmu { + secure-reg-access; +}; + &ssi2 { status = "okay"; }; @@ -578,10 +593,47 @@ rave-sp { compatible = "zii,rave-sp-rdu1"; current-speed = <38400>; + #address-cells = <1>; + #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + + eeprom@ae { + compatible = "zii,rave-sp-eeprom"; + reg = <0xae 0x200>; + zii,eeprom-name = "switch-eeprom"; + /* + * Not all RDU1s have this functionality, so we + * rely on the bootloader to enable this + */ + status = "disabled"; + }; }; }; @@ -620,6 +672,10 @@ status = "okay"; }; +&wdog1 { + status = "disabled"; +}; + &iomuxc { pinctrl_ampgpio: ampgpiogrp { fsl,pins = < @@ -660,6 +716,23 @@ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + /* + * GPIO1_1 is not directly used by eSDHC1 in + * any capacity, but earlier versions of RDU1 + * used that pin as WP GPIO for eSDHC3 and + * because of that that pad has an external + * pull-up resistor. This is problematic + * because out of reset the pad is configured + * as ALT0 which serves as SD1_WP, which, when + * pulled high by and external pull-up, will + * inhibit execution of any write request to + * attached eMMC device. + * + * To avoid this problem we configure the pad + * to ALT1/GPIO and avoid driving SD1_WP + * signal high. + */ + MX51_PAD_GPIO1_1__GPIO1_1 0x0000 >; }; diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts new file mode 100644 index 000000000000..26cf08549df4 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts @@ -0,0 +1,448 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx51.dtsi" + +/ { + model = "ZII SCU2 Mezz Board"; + compatible = "zii,imx51-scu2-mezz", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + + aliases { + mdio-gpio0 = &mdio_gpio; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_mmc_reset>; + gpio = <&gpio3 13 GPIO_ACTIVE_LOW>; + startup-delay-us = <150000>; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + mdio_gpio: mdio-gpio { + compatible = "virtual,mdio-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_swmdio>; + gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */ + <&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */ + #address-cells = <1>; + #size-cells = <0>; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port4"; + }; + + port@1 { + reg = <1>; + label = "port5"; + }; + + port@2 { + reg = <2>; + label = "port6"; + }; + + port@3 { + reg = <3>; + label = "port7"; + }; + + port@4 { + reg = <4>; + label = "cpu"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@5 { + reg = <5>; + label = "mezz2esb"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled3: led3@3 { + reg = <3>; + label = "system:red:power"; + linux,default-trigger = "default-on"; + }; + + sysled4: led4@4 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + compatible = "atmel,at45", "atmel,dataflash"; + reg = <1>; + spi-max-frequency = <25000000>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc4>; + bus-width = <4>; + no-1-8-v; + no-sdio; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + status = "okay"; + phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-supply = <&vgen3_reg>; + phy-handle = <ðphy>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + max-speed = <100>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-mezz"; + current-speed = <57600>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog-legacy"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb2_reg>; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 + >; + }; + + pinctrl_esdhc4: esdhc4grp { + fsl,pins = < + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 + MX51_PAD_NANDF_D0__GPIO4_8 0x100 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x2004 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x2004 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x2004 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT10__FEC_COL 0x0180 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x0180 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x20a4 + MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x20a4 + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_DI_GP3__FEC_TX_ER 0x2004 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x2180 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x0085 + MX51_PAD_DI_GP4__FEC_RDATA2 0x0085 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x0085 + MX51_PAD_DI2_PIN2__FEC_MDC 0x2004 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x01f5 + MX51_PAD_DI2_PIN4__FEC_CRS 0x0180 + MX51_PAD_EIM_A20__GPIO2_14 0x0085 + MX51_PAD_EIM_A21__GPIO2_15 0x00e5 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x85 + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 + >; + }; + + pinctrl_swmdio: swmdiogrp { + fsl,pins = < + MX51_PAD_EIM_D22__GPIO2_6 0x100 + MX51_PAD_EIM_D23__GPIO2_7 0x100 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usb_mmc_reset: usbmmcgrp { + fsl,pins = < + MX51_PAD_CSI1_D9__GPIO3_13 0x85 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts new file mode 100644 index 000000000000..e6ebac8f43e4 --- /dev/null +++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts @@ -0,0 +1,467 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; + +#include "imx51.dtsi" + +/ { + model = "ZII SCU3 ESB board"; + compatible = "zii,imx51-scu3-esb", "fsl,imx51"; + + chosen { + stdout-path = &uart1; + }; + + /* Will be filled by the bootloader */ + memory@90000000 { + reg = <0x90000000 0>; + }; + + usb_vbus: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_mmc_reset>; + gpio = <&gpio4 19 GPIO_ACTIVE_LOW>; + startup-delay-us = <150000>; + }; +}; + +&cpu { + cpu-supply = <&sw1_reg>; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>, + <&gpio4 25 GPIO_ACTIVE_LOW>; + status = "okay"; + + pmic@0 { + compatible = "fsl,mc13892"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + spi-max-frequency = <6000000>; + spi-cs-high; + reg = <0>; + interrupt-parent = <&gpio1>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-adc; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1375000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-boot-on; + regulator-always-on; + }; + + vpll_reg: vpll { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + vdig_reg: vdig { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + }; + + vsd_reg: vsd { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3150000>; + }; + + vusb_reg: vusb { + regulator-always-on; + }; + + vusb2_reg: vusb2 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2775000>; + regulator-boot-on; + regulator-always-on; + }; + + vvideo_reg: vvideo { + regulator-min-microvolt = <2775000>; + regulator-max-microvolt = <2775000>; + }; + + vaudio_reg: vaudio { + regulator-min-microvolt = <2300000>; + regulator-max-microvolt = <3000000>; + }; + + vcam_reg: vcam { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-always-on; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led-control = <0x0 0x0 0x3f83f8 0x0>; + + sysled3: led3@3 { + reg = <3>; + label = "system:red:power"; + linux,default-trigger = "default-on"; + }; + + sysled4: led4@4 { + reg = <4>; + label = "system:green:act"; + linux,default-trigger = "heartbeat"; + }; + }; + }; + + flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <25000000>; + reg = <1>; + }; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <8>; + non-removable; + no-1-8-v; + no-sdio; + no-sd; + status = "okay"; +}; + +&esdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc4>; + bus-width = <4>; + no-1-8-v; + no-sdio; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "mii"; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + fec_mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch@0 { + compatible = "marvell,mv88e6085"; + reg = <0>; + dsa,member = <0 0>; + eeprom-length = <512>; + interrupt-parent = <&gpio4>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "port1"; + }; + + port@1 { + reg = <1>; + label = "port2"; + }; + + port@2 { + reg = <2>; + label = "port3"; + }; + + port@3 { + reg = <3>; + label = "scu2scu"; + }; + + port@4 { + reg = <4>; + label = "esb2host"; + }; + + port@5 { + reg = <5>; + label = "esb2mezz"; + phy-mode = "sgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + port@6 { + reg = <6>; + label = "cpu"; + phy-mode = "mii"; + ethernet = <&fec>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&ipu { + status = "disabled"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-esb"; + current-speed = <57600>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog-legacy"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&usbotg { + dr_mode = "host"; + disable-over-current; + phy_type = "utmi_wide"; + vbus-supply = <&usb_vbus>; + status = "okay"; +}; + +&usbphy0 { + vcc-supply = <&vusb2_reg>; +}; + +&wdog1 { + status = "disabled"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185 + MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185 + MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185 + MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 + MX51_PAD_CSPI1_SS1__GPIO4_25 0x85 + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5 + MX51_PAD_SD1_CLK__SD1_CLK 0x20d5 + MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5 + MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5 + MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5 + MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5 + MX51_PAD_SD2_DATA0__SD1_DAT4 0x20d5 + MX51_PAD_SD2_DATA1__SD1_DAT5 0x20d5 + MX51_PAD_SD2_DATA2__SD1_DAT6 0x20d5 + MX51_PAD_SD2_DATA3__SD1_DAT7 0x20d5 + >; + }; + + pinctrl_esdhc4: esdhc4grp { + fsl,pins = < + MX51_PAD_NANDF_RB1__SD4_CMD 0x400020d5 + MX51_PAD_NANDF_CS2__SD4_CLK 0x20d5 + MX51_PAD_NANDF_CS3__SD4_DAT0 0x20d5 + MX51_PAD_NANDF_CS4__SD4_DAT1 0x20d5 + MX51_PAD_NANDF_CS5__SD4_DAT2 0x20d5 + MX51_PAD_NANDF_CS6__SD4_DAT3 0x20d5 + MX51_PAD_NANDF_D0__GPIO4_8 0x100 + >; + }; + + pinctrl_fec: fecgrp { + fsl,pins = < + MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x2004 + MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x2004 + MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x2004 + MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x2004 + MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x2004 + MX51_PAD_DISP2_DAT10__FEC_COL 0x0180 + MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x0180 + MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x20a4 + + MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x2180 + MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x2180 + MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x0085 + MX51_PAD_DI_GP4__FEC_RDATA2 0x0085 + MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x0085 + MX51_PAD_DI2_PIN2__FEC_MDC 0x2004 + MX51_PAD_DI2_PIN3__FEC_MDIO 0x01f5 + MX51_PAD_DI2_PIN4__FEC_CRS 0x0180 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed + MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX51_PAD_GPIO1_4__GPIO1_4 0x85 + MX51_PAD_GPIO1_8__GPIO1_8 0xe5 + >; + }; + + pinctrl_switch: switchgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_CK__GPIO4_20 0xc5 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX51_PAD_UART1_RXD__UART1_RXD 0x1c5 + MX51_PAD_UART1_TXD__UART1_TXD 0x1c5 + MX51_PAD_UART1_RTS__UART1_RTS 0x1c5 + MX51_PAD_UART1_CTS__UART1_CTS 0x1c5 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX51_PAD_UART2_RXD__UART2_RXD 0x1c5 + MX51_PAD_UART2_TXD__UART2_TXD 0x1c5 + MX51_PAD_USBH1_DATA0__UART2_CTS 0x1c5 + MX51_PAD_USBH1_DATA3__UART2_RTS 0x1c5 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX51_PAD_UART3_RXD__UART3_RXD 0x1c5 + MX51_PAD_UART3_TXD__UART3_TXD 0x1c5 + >; + }; + + pinctrl_usb_mmc_reset: usbmmcgrp { + fsl,pins = < + MX51_PAD_AUD3_BB_RXD__GPIO4_19 0x100 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index fe01b890c715..5c4ba91e43ba 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -93,18 +93,17 @@ }; }; - usbphy { - #address-cells = <1>; - #size-cells = <0>; - compatible = "simple-bus"; + pmu: pmu { + compatible = "arm,cortex-a8-pmu"; + interrupt-parent = <&tzic>; + interrupts = <77>; + }; - usbphy0: usbphy@0 { - compatible = "usb-nop-xceiv"; - reg = <0>; - clocks = <&clks IMX5_CLK_USB_PHY_GATE>; - clock-names = "main_clk"; - #phy-cells = <0>; - }; + usbphy0: usbphy0 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX5_CLK_USB_PHY_GATE>; + clock-names = "main_clk"; + #phy-cells = <0>; }; display-subsystem { @@ -250,6 +249,11 @@ }; }; + aipstz1: bridge@73f00000 { + compatible = "fsl,imx51-aipstz"; + reg = <0x73f00000 0x60>; + }; + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; @@ -435,6 +439,11 @@ reg = <0x80000000 0x10000000>; ranges; + aipstz2: bridge@83f00000 { + compatible = "fsl,imx51-aipstz"; + reg = <0x83f00000 0x60>; + }; + iim: iim@83f98000 { compatible = "fsl,imx51-iim", "fsl,imx27-iim"; reg = <0x83f98000 0x4000>; @@ -442,6 +451,11 @@ clocks = <&clks IMX5_CLK_IIM_GATE>; }; + tigerp: tigerp@83fa0000 { + compatible = "fsl,imx51-tigerp"; + reg = <0x83fa0000 0x28>; + }; + owire: owire@83fa4000 { compatible = "fsl,imx51-owire", "fsl,imx21-owire"; reg = <0x83fa4000 0x4000>; @@ -528,6 +542,11 @@ status = "disabled"; }; + m4if: m4if@83fd8000 { + compatible = "fsl,imx51-m4if"; + reg = <0x83fd8000 0x1000>; + }; + weim: weim@83fda000 { #address-cells = <2>; #size-cells = <1>; @@ -588,6 +607,26 @@ clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + vpu@83ff4000 { + compatible = "fsl,imx51-vpu", "cnm,codahx4"; + reg = <0x83ff4000 0x1000>; + interrupts = <9>; + clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>, + <&clks IMX5_CLK_VPU_GATE>; + clock-names = "per", "ahb"; + resets = <&src 1>; + iram = <&iram>; + }; + + sahara: crypto@83ff8000 { + compatible = "fsl,imx53-sahara", "fsl,imx51-sahara"; + reg = <0x83ff8000 0x4000>; + interrupts = <19 20>; + clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>, + <&clks IMX5_CLK_SAHARA_IPG_GATE>; + clock-names = "ipg", "ahb"; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts new file mode 100644 index 000000000000..0e7f071fd10e --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp-ddc.dts @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-kp.dtsi" + +/ { + model = "K+P imx53 DDC"; + compatible = "kiebackpeter,imx53-ddc", "fsl,imx53"; + + backlight_lcd: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 50000>; + power-supply = <®_backlight>; + brightness-levels = <0 24 28 32 36 + 40 44 48 52 56 + 60 64 68 72 76 + 80 84 88 92 96 100>; + default-brightness-level = <20>; + }; + + lcd_display: display { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp>; + + port@0 { + reg = <0>; + + display1_in: endpoint { + remote-endpoint = <&ipu_di1_disp1>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel: lcd-panel { + compatible = "koe,tx14d24vm1bpa"; + backlight = <&backlight_lcd>; + power-supply = <®_3v3>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_backlight: regulator-backlight { + compatible = "regulator-fixed"; + regulator-name = "backlight-supply"; + regulator-min-microvolt = <15000000>; + regulator-max-microvolt = <15000000>; + regulator-always-on; + }; +}; + +&fec { + status = "okay"; +}; + +&i2c3 { + adc@48 { + compatible = "ti,ads1015"; + reg = <0x48>; + #address-cells = <1>; + #size-cells = <0>; + + channel@4 { + reg = <4>; + ti,gain = <2>; + ti,datarate = <4>; + }; + + channel@6 { + reg = <6>; + ti,gain = <2>; + ti,datarate = <4>; + }; + }; + + gpio-expander2@21 { + compatible = "nxp,pcf8574"; + reg = <0x21>; + interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&iomuxc { + imx53-kp-ddc { + pinctrl_disp: dispgrp { + fsl,pins = < + MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x4 + MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x4 + MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x4 + MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x4 + MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x4 + MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x4 + MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x4 + MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x4 + MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x4 + MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x4 + MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x4 + MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x4 + MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x4 + MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x4 + MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x4 + MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x4 + MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x4 + MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x4 + MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x4 + MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x4 + MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x4 + MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x4 + MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x4 + MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x4 + MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x4 + MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x4 + MX53_PAD_GPIO_1__PWM2_PWMO 0x4 + >; + }; + }; +}; + +&ipu_di1_disp1 { + remote-endpoint = <&display1_in>; +}; + +&pmic { + fsl,mc13xxx-uses-touch; +}; diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/imx53-kp-hsc.dts new file mode 100644 index 000000000000..6e3d71baac0f --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp-hsc.dts @@ -0,0 +1,52 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-kp.dtsi" + +/ { + model = "K+P imx53 HSC"; + compatible = "kiebackpeter,imx53-hsc", "fsl,imx53"; +}; + +&fec { + status = "okay"; + + fixed-link { /* RMII fixed link to LAN9303 */ + speed = <100>; + full-duplex; + }; +}; + +&i2c3 { + switch: switch@a { + compatible = "smsc,lan9303-i2c"; + reg = <0xa>; + reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + reset-duration = <400>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { /* RMII fixed link to master */ + reg = <0>; + label = "cpu"; + ethernet = <&fec>; + }; + + port@1 { /* external port 1 */ + reg = <1>; + label = "lan1"; + }; + + port@2 { /* external port 2 */ + reg = <2>; + label = "lan2"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi new file mode 100644 index 000000000000..8b25416a5303 --- /dev/null +++ b/arch/arm/boot/dts/imx53-kp.dtsi @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2018 + * Lukasz Majewski, DENX Software Engineering, lukma@denx.de + */ + +/dts-v1/; +#include "imx53-tqma53.dtsi" +#include <dt-bindings/input/input.h> + +/ { + buzzer { + compatible = "pwm-beeper"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buzzer>; + pwms = <&pwm1 0 500000>; + }; + + gpio-buttons { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpiobuttons>; + + button-kalt { + label = "Kaltstart"; + linux,code = <KEY_F6>; + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + }; + + button-pwr { + label = "PowerFailInterrupt"; + linux,code = <KEY_F7>; + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + led-bus { + label = "bus"; + gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + led-error { + label = "error"; + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "gpio"; + default-state = "off"; + }; + + led-flash { + label = "flash"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; + + gpio-expander1@22 { + compatible = "nxp,pcf8574"; + reg = <0x22>; + interrupts = <109>; + #gpio-cells = <2>; + gpio-controller; + }; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kp_common>; + + imx53-kp-common { + pinctrl_buzzer: buzzergrp { + fsl,pins = < + MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4 + >; + }; + + pinctrl_gpiobuttons: gpiobuttonsgrp { + fsl,pins = < + MX53_PAD_EIM_RW__GPIO2_26 0x1e4 + MX53_PAD_EIM_D22__GPIO3_22 0x1e4 + >; + }; + + pinctrl_kp_common: kpcommongrp { + fsl,pins = < + MX53_PAD_EIM_CS0__GPIO2_23 0x1e4 + MX53_PAD_GPIO_19__GPIO4_5 0x1e4 + MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4 + MX53_PAD_PATA_DATA7__GPIO2_7 0xe0 + MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4 + MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4 + MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4 + MX53_PAD_EIM_D17__GPIO3_17 0x1e4 + MX53_PAD_EIM_D18__GPIO3_18 0x1e4 + MX53_PAD_EIM_D21__GPIO3_21 0x1e4 + MX53_PAD_EIM_D29__GPIO3_29 0x1e4 + MX53_PAD_EIM_DA11__GPIO3_11 0x1e4 + MX53_PAD_EIM_DA13__GPIO3_13 0x1e4 + MX53_PAD_EIM_DA14__GPIO3_14 0x1e4 + MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4 + MX53_PAD_SD1_CMD__GPIO1_18 0x1e4 + MX53_PAD_SD1_CLK__GPIO1_20 0x1e4 + >; + }; + + pinctrl_leds: ledgrp { + fsl,pins = < + MX53_PAD_EIM_EB2__GPIO2_30 0x1d4 + MX53_PAD_EIM_D28__GPIO3_28 0x1d4 + MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4 + MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4 + >; + }; + }; +}; + +&pinctrl_uart1 { + fsl,pins = < + MX53_PAD_EIM_D23__GPIO3_23 0x1e4 + MX53_PAD_EIM_EB3__GPIO2_31 0x1e4 + MX53_PAD_EIM_D24__GPIO3_24 0x1e4 + MX53_PAD_EIM_D25__GPIO3_25 0x1e4 + MX53_PAD_EIM_D19__GPIO3_19 0x1e4 + MX53_PAD_EIM_D20__GPIO3_20 0x1e4 + >; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbphy0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts index 3aa6f693fa9f..cdb90bee7b4a 100644 --- a/arch/arm/boot/dts/imx53-ppd.dts +++ b/arch/arm/boot/dts/imx53-ppd.dts @@ -140,6 +140,25 @@ regulator-always-on; }; + reg_3v3: regulator-3v3 { + /* TPS54320 */ + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_3v3_lcd: regulator-3v3-lcd { + /* MIC2009 */ + compatible = "regulator-fixed"; + regulator-name = "LCD_3V3"; + vin-supply = <®_3v3>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + pwm_bl: backlight { compatible = "pwm-backlight"; pwms = <&pwm2 0 50000>; @@ -154,6 +173,7 @@ 234 237 239 242 244 247 249 252 255>; default-brightness-level = <0>; enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + power-supply = <®_3v3_lcd>; }; leds { @@ -198,8 +218,9 @@ }; }; - usbphy2: usbphy2 { + usbphy2: usbphy-2 { compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>; clock-names = "main_clk"; clock-frequency = <24000000>; @@ -208,8 +229,9 @@ assigned-clock-parents = <&clks IMX5_CLK_OSC>; }; - usbphy3: usbphy3 { + usbphy3: usbphy-3 { compatible = "usb-nop-xceiv"; + vcc-supply = <®_3v3>; reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>; clock-names = "main_clk"; @@ -221,6 +243,7 @@ panel-lvds0 { compatible = "nvd,9128"; + power-supply = <®_3v3_lcd>; port { panel_in_lvds0: endpoint { @@ -230,6 +253,14 @@ }; }; +&usbphy0 { + vcc-supply = <®_3v3>; +}; + +&usbphy1 { + vcc-supply = <®_3v3>; +}; + &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; @@ -414,6 +445,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; + phy-supply = <®_3v3>; phy-mode = "rmii"; phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>; status = "okay"; @@ -562,6 +594,10 @@ }; }; +&pmu { + secure-reg-access; +}; + &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index ef7658a78836..7423d462d1e4 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -153,7 +153,6 @@ imx53-qsb { pinctrl_hog: hoggrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 MX53_PAD_GPIO_8__GPIO1_8 0x80000000 MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 @@ -180,6 +179,12 @@ >; }; + pinctrl_codec: codecgrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4 + >; + }; + pinctrl_esdhc1: esdhc1grp { fsl,pins = < MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5 @@ -310,6 +315,8 @@ sgtl5000: codec@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_codec>; #sound-dai-cells = <0>; VDDA-supply = <®_3p2v>; VDDIO-supply = <®_3p2v>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 1a7a7bb3df45..6386185ae234 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -113,7 +113,7 @@ }; }; - pmu { + pmu: pmu { compatible = "arm,cortex-a8-pmu"; interrupt-parent = <&tzic>; interrupts = <77>; @@ -672,6 +672,11 @@ status = "disabled"; }; + tigerp: tigerp@63fa0000 { + compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp"; + reg = <0x63fa0000 0x28>; + }; + owire: owire@63fa4000 { compatible = "fsl,imx53-owire", "fsl,imx21-owire"; reg = <0x63fa4000 0x4000>; diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts index 3dee3af1a4c1..9de45a717356 100644 --- a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts @@ -221,9 +221,6 @@ /* Colibri MMC */ &usdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_mmc_cd>; - cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts new file mode 100644 index 000000000000..bf53f0552aa1 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2018 Engicam S.r.l. + * Copyright (C) 2018 Amarula Solutions B.V. + * Author: Jagan Teki <jagan@amarulasolutions.com> + */ + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-icore.dtsi" + +/ { + model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit"; + compatible = "engicam,imx6-icore", "fsl,imx6dl"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts index 6b2d29138bed..df8607fe4142 100644 --- a/arch/arm/boot/dts/imx6dl-mamoj.dts +++ b/arch/arm/boot/dts/imx6dl-mamoj.dts @@ -6,11 +6,156 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "imx6dl.dtsi" / { model = "BTicino i.MX6DL Mamoj board"; compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl"; + + backlight_lcd: backlight-lcd { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */ + brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>; + default-brightness-level = <7>; + }; + + display: disp0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel-lcd { + compatible = "rocktech,rk070er9427"; + backlight = <&backlight_lcd>; + power-supply = <®_lcd_lr>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + reg_lcd_3v3: regulator-lcd-dvdd { + compatible = "regulator-fixed"; + regulator-name = "lcd-dvdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 1 0>; + enable-active-high; + startup-delay-us = <21000>; + }; + + reg_lcd_power: regulator-lcd-power { + compatible = "regulator-fixed"; + regulator-name = "lcd-enable"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 6 0>; + enable-active-high; + vin-supply = <®_lcd_3v3>; + }; + + reg_lcd_vgl: regulator-lcd-vgl { + compatible = "regulator-fixed"; + regulator-name = "lcd-vgl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_power>; + }; + + reg_lcd_vgh: regulator-lcd-vgh { + compatible = "regulator-fixed"; + regulator-name = "lcd-vgh"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_avdd>; + }; + + reg_lcd_vcom: regulator-lcd-vcom { + compatible = "regulator-fixed"; + regulator-name = "lcd-vcom"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>; + startup-delay-us = <11000>; + enable-active-high; + vin-supply = <®_lcd_vgh>; + }; + + reg_lcd_lr: regulator-lcd-lr { + compatible = "regulator-fixed"; + regulator-name = "lcd-lr"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_lcd_vcom>; + }; + + reg_lcd_avdd: regulator-lcd-avdd { + compatible = "regulator-fixed"; + regulator-name = "lcd-avdd"; + regulator-min-microvolt = <10280000>; + regulator-max-microvolt = <10280000>; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + startup-delay-us = <6000>; + enable-active-high; + vin-supply = <®_lcd_vgl>; + }; + + reg_usb_host: regulator-usb-vbus { + compatible = "regulator-fixed"; + regulator-name = "usbhost-vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbhost>; + regulator-min-microvolt = <50000000>; + regulator-max-microvolt = <50000000>; + gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wl18xx_vmmc: regulator-wl18xx-vmcc { + compatible = "regulator-fixed"; + regulator-name = "vwl1807"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; &fec { @@ -147,12 +292,56 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + &uart3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; status = "okay"; }; +&usbh1 { + vbus-supply = <®_usb_host>; + status = "okay"; +}; + +&usbotg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + vmmc-supply = <®_wl18xx_vmmc>; + no-1-8-v; + non-removable; + wakeup-source; + keep-power-in-suspend; + cap-power-off-card; + max-frequency = <25000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH>; + tcxo-clock-frequency = <26000000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; @@ -200,6 +389,59 @@ >; }; + pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */ + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */ + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 /* VDOUT_HSYNC */ + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 /* VDOUT_VSYNC */ + MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04 0x10 /* VDOUT_RESET */ + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x40013058 /* EN_LCD33V */ + MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x4001b0b0 /* EN_AVDD */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x40013058 /* ENVGH */ + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x40013058 /* ENVGL */ + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x40013058 /* LCD_POWER */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x40013058 /* EN_VCOM_LCD */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x40013058 /* LCD_L_R */ + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x40013058 /* LCD_U_D */ + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -207,6 +449,23 @@ >; }; + pinctrl_usbhost: usbhostgrp { + fsl,pins = < + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x4001b0b0 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17069 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10079 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -221,4 +480,10 @@ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 >; }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x4001b0b0 + >; + }; }; diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts index 30ce2c0cec2b..61fa30991d67 100644 --- a/arch/arm/boot/dts/imx6dl-nit6xlite.dts +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index ec53d7a09572..ef58d3b0ea0d 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 2e98c92adff7..dd3226fe5ecd 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -19,36 +19,8 @@ reg = <0x10000000 0x40000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - reg_usb_otg_vbus: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "usb_otg_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio3 22 0>; - enable-active-high; - }; + chosen { + stdout-path = "serial1:115200n8"; }; leds { @@ -82,6 +54,28 @@ mux-int-port = <1>; mux-ext-port = <3>; }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; }; &audmux { diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index b384913c34dd..f0607eb41df4 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -33,6 +33,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -50,6 +51,29 @@ device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1150000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts index aa0e631f3c0a..707ac9a46115 100644 --- a/arch/arm/boot/dts/imx6q-apalis-eval.dts +++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts @@ -62,6 +62,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; @@ -109,6 +113,7 @@ */ compatible = "edt,et057090dhu"; backlight = <&backlight>; + power-supply = <®_3v3_sw>; port { lcd_panel_in: endpoint { @@ -127,19 +132,30 @@ enable-active-high; status = "okay"; }; + + reg_3v3_sw: regulator-3v3-sw { + compatible = "regulator-fixed"; + regulator-name = "3.3V_SW"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; &backlight { brightness-levels = <0 127 191 223 239 247 251 255>; default-brightness-level = <1>; + power-supply = <®_3v3_sw>; status = "okay"; }; &can1 { + xceiver-supply = <®_3v3_sw>; status = "okay"; }; &can2 { + xceiver-supply = <®_3v3_sw>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts index e8dccf552122..4e1c8feaef82 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts @@ -63,6 +63,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 6831dfd24cc1..469e3d0e2827 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -62,6 +62,10 @@ rtc1 = &snvs_rtc; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + gpio-keys { compatible = "gpio-keys"; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts index 65ef4cacbc71..18ae4f3be6e3 100644 --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts @@ -187,6 +187,72 @@ >; }; +&cpu1 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu2 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + +&cpu3 { + /* + * Although the imx6q fuse indicates that 1.2GHz operation is possible, + * the module behaves unstable at this frequency. Hence, remove the + * 1.2GHz operation point here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; +}; + &ecspi1 { cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts index acd3d33476d4..95b2efda17b4 100644 --- a/arch/arm/boot/dts/imx6q-icore-mipi.dts +++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts @@ -20,6 +20,14 @@ status = "okay"; }; +&mipi_csi { + status = "okay"; +}; + +&ov5640 { + status = "okay"; +}; + &usdhc3 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts index 2a3c44f98eed..03bec0c53063 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts index c5d59baa1a07..eb4eecb6ed22 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index df8ff397a914..435445a34ad0 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts index f2368a073d07..c54362fcc508 100644 --- a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts +++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts @@ -177,6 +177,7 @@ touchscreen-size-y = <480>; touchscreen-inverted-x; touchscreen-inverted-y; + wakeup-source; }; rtc@68 { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 77f8f030dd07..0193ee6fe964 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -38,6 +38,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6QDL_CLK_ARM>, <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, <&clks IMX6QDL_CLK_STEP>, @@ -50,25 +51,106 @@ soc-supply = <®_soc>; }; - cpu@1 { + cpu1: cpu@1 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <1>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; - cpu@2 { + cpu2: cpu@2 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <2>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; - cpu@3 { + cpu3: cpu@3 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <3>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 1200000 1275000 + 996000 1250000 + 852000 1250000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + pu-supply = <®_pu>; + soc-supply = <®_soc>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi index 64fbee61de44..05f07ea3e8c8 100644 --- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi +++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi @@ -61,25 +61,17 @@ status = "disabled"; }; - reg_1p8v: regulator-1p8v { + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_3p3v: regulator-3p3v { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "3P3V"; + regulator-name = "+V3.3_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -297,7 +289,7 @@ vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -322,8 +314,9 @@ compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <®_module_3v3_audio>; + VDDIO-supply = <®_module_3v3>; + VDDD-supply = <&vgen4_reg>; }; /* STMPE811 touch screen controller */ @@ -455,9 +448,10 @@ &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + disable-wp; + no-1-8-v; status = "disabled"; }; @@ -465,9 +459,10 @@ &usdhc2 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <4>; - voltage-ranges = <3300 3300>; + disable-wp; + no-1-8-v; status = "disabled"; }; @@ -475,9 +470,9 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + no-1-8-v; non-removable; status = "okay"; }; @@ -952,38 +947,4 @@ MX6QDL_PAD_SD3_RST__SD3_RESET 0x17059 >; }; - - pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 - >; - }; }; diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi index 76035db96f67..87e15e7cb32b 100644 --- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi +++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi @@ -56,25 +56,17 @@ status = "disabled"; }; - reg_1p8v: regulator-1p8v { + reg_module_3v3: regulator-module-3v3 { compatible = "regulator-fixed"; - regulator-name = "1P8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - reg_2p5v: regulator-2p5v { - compatible = "regulator-fixed"; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; + regulator-name = "+V3.3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; - reg_3p3v: regulator-3p3v { + reg_module_3v3_audio: regulator-module-3v3-audio { compatible = "regulator-fixed"; - regulator-name = "3P3V"; + regulator-name = "+V3.3_AUDIO"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; @@ -227,7 +219,7 @@ vgen4_reg: vgen4 { regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; @@ -252,8 +244,9 @@ compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks IMX6QDL_CLK_CKO>; - VDDA-supply = <®_2p5v>; - VDDIO-supply = <®_3p3v>; + VDDA-supply = <®_module_3v3_audio>; + VDDIO-supply = <®_module_3v3>; + VDDD-supply = <&vgen4_reg>; lrclk-strength = <3>; }; @@ -385,10 +378,12 @@ /* Colibri MMC */ &usdhc1 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc1>; - vqmmc-supply = <®_3p3v>; + pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>; + cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */ + disable-wp; + vqmmc-supply = <®_module_3v3>; bus-width = <4>; - voltage-ranges = <3300 3300>; + no-1-8-v; status = "disabled"; }; @@ -396,9 +391,9 @@ &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; - vqmmc-supply = <®_3p3v>; + vqmmc-supply = <®_module_3v3>; bus-width = <8>; - voltage-ranges = <3300 3300>; + no-1-8-v; non-removable; status = "okay"; }; @@ -479,8 +474,7 @@ pinctrl_gpio_keys: gpiokeys { fsl,pins = < - /* Power button */ - MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0 >; }; @@ -567,7 +561,7 @@ pinctrl_mmc_cd: gpiommccd { fsl,pins = < - MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b1 >; }; @@ -698,40 +692,6 @@ >; }; - pinctrl_usdhc3_100mhz: usdhc3100mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170b9 - >; - }; - - pinctrl_usdhc3_200mhz: usdhc3200mhzgrp { - fsl,pins = < - MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 - MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 - MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 - MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 - MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 - MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 - MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 - MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 - MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 - MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 - /* eMMC reset */ - MX6QDL_PAD_SD3_RST__SD3_RESET 0x170f9 - >; - }; - pinctrl_weim_cs0: weimcs0grp { fsl,pins = < /* nEXT_CS0 */ diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi index 0a1574998fc6..9ce993776160 100644 --- a/arch/arm/boot/dts/imx6qdl-icore.dtsi +++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi @@ -65,8 +65,7 @@ regulator-always-on; }; - - reg_2p5v: regulator-3p3v { + reg_2p5v: regulator-2p5v { compatible = "regulator-fixed"; regulator-name = "2P5V"; regulator-min-microvolt = <2500000>; @@ -215,6 +214,29 @@ pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + ov5640: camera@3c { + compatible = "ovti,ov5640"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov5640>; + reg = <0x3c>; + clocks = <&clks IMX6QDL_CLK_CKO>; + clock-names = "xclk"; + DOVDD-supply = <®_1p8v>; + AVDD-supply = <®_3p3v>; + DVDD-supply = <®_3p3v>; + powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; + status = "disabled"; + + port { + ov5640_to_mipi_csi2: endpoint { + remote-endpoint = <&mipi_csi2_in>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + }; + sgtl5000: codec@a { #sound-dai-cells = <0>; compatible = "fsl,sgtl5000"; @@ -226,6 +248,20 @@ }; }; +&mipi_csi { + status = "disabled"; + + port@0 { + reg = <0>; + + mipi_csi2_in: endpoint { + remote-endpoint = <&ov5640_to_mipi_csi2>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; +}; + &pwm3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm3>; @@ -353,7 +389,14 @@ fsl,pins = < MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_ov5640: ov5640grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 >; }; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi index aab088f318e8..29baf25ae5d0 100644 --- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -292,6 +256,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; rtc@6f { diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi index 87ca6ead4098..39200e5dc896 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2015 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -442,6 +406,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi index f5b763d39285..572abd7499b1 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -360,6 +324,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 596866b0a0d2..98384a6c5d12 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -1,44 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2013 Boundary Devices, Inc. * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> @@ -370,6 +334,7 @@ reg = <0x38>; interrupt-parent = <&gpio1>; interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 0e28e36ddbb2..9f11f1fcc3e6 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -6,6 +6,10 @@ #include <dt-bindings/gpio/gpio.h> / { + chosen { + stdout-path = &uart4; + }; + memory@10000000 { reg = <0x10000000 0x80000000>; }; @@ -155,6 +159,27 @@ gpio-controller; #gpio-cells = <2>; }; + + light-sensor@44 { + compatible = "isil,isl29023"; + reg = <0x44>; + interrupt-parent = <&gpio5>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + }; + + magnetometer@e { + compatible = "fsl,mag3110"; + reg = <0x0e>; + interrupt-parent = <&gpio2>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + }; + + accelerometer@1c { + compatible = "fsl,mma8451"; + reg = <0x1c>; + interrupt-parent = <&gpio6>; + interrupts = <31 IRQ_TYPE_LEVEL_LOW>; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 15744ad52535..6e46a195b399 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -341,6 +341,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index e1afa54404d0..381bf61fcd28 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -8,30 +8,6 @@ #include <dt-bindings/gpio/gpio.h> / { - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_2p5v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "2P5V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <2500000>; - regulator-always-on; - }; - - reg_3p3v: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - }; - sound { compatible = "fsl,imx6-wandboard-sgtl5000", "fsl,imx-audio-sgtl5000"; @@ -52,6 +28,32 @@ spdif-controller = <&spdif>; spdif-out; }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator-usbotgvbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotgvbus>; + gpio = <&gpio3 22 GPIO_ACTIVE_LOW>; + }; }; &audmux { @@ -174,6 +176,12 @@ >; }; + pinctrl_usbotgvbus: usbotgvbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x130b0 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 @@ -248,10 +256,11 @@ }; &usbotg { + vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; - dr_mode = "peripheral"; + dr_mode = "otg"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 19a075aee19e..87c60a853f8b 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -320,10 +320,36 @@ rave-sp { compatible = "zii,rave-sp-rdu2"; current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; watchdog { compatible = "zii,rave-sp-watchdog"; }; + + backlight { + compatible = "zii,rave-sp-backlight"; + }; + + pwrbutton { + compatible = "zii,rave-sp-pwrbutton"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "dds-eeprom"; + }; + + eeprom@a4 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa4 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; }; }; @@ -569,14 +595,14 @@ rmi4-f11@11 { reg = <0x11>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; rmi4-f12@12 { reg = <0x12>; - touchscreen-inverted-y; + touchscreen-inverted-x; touchscreen-swapped-x-y; syna,sensor-type = <1>; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 911141e24681..61d2d26afbf4 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -922,7 +922,6 @@ crypto: caam@2100000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <4>; #address-cells = <1>; #size-cells = <1>; reg = <0x2100000 0x10000>; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts index a39b86036581..741d1ed338ca 100644 --- a/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_max.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts index 011726c836cd..1593ac86b2a4 100644 --- a/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts +++ b/arch/arm/boot/dts/imx6qp-nitrogen6_som2.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2017 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 92ad01f676e3..679b4482ab13 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -12,6 +12,10 @@ model = "Freescale i.MX6 SoloLite EVK Board"; compatible = "fsl,imx6sl-evk", "fsl,imx6sl"; + chosen { + stdout-path = &uart1; + }; + memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -73,6 +77,8 @@ reg_lcd_3v3: regulator-lcd-3v3 { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; regulator-name = "lcd-3v3"; gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; enable-active-high; @@ -195,6 +201,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { @@ -406,6 +413,12 @@ >; }; + pinctrl_reg_lcd_3v3: reglcd3v3grp { + fsl,pins = < + MX6SL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1 diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 994e48dc1df0..7a4f5dace902 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -60,6 +60,7 @@ 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>, <&clks IMX6SL_CLK_STEP>, <&clks IMX6SL_CLK_PLL1_SW>, <&clks IMX6SL_CLK_PLL1_SYS>; @@ -523,8 +524,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -553,8 +554,8 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2850000>; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; @@ -680,10 +681,36 @@ #interrupt-cells = <3>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; interrupt-parent = <&intc>; - pu-supply = <®_pu>; - clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, - <&clks IMX6SL_CLK_GPU2D_PODF>; - #power-domain-cells = <1>; + clocks = <&clks IMX6SL_CLK_IPG>; + clock-names = "ipg"; + + pgc { + #address-cells = <1>; + #size-cells = <0>; + + power-domain@0 { + reg = <0>; + #power-domain-cells = <0>; + }; + + pd_pu: power-domain@1 { + reg = <1>; + #power-domain-cells = <0>; + power-supply = <®_pu>; + clocks = <&clks IMX6SL_CLK_GPU2D_OVG>, + <&clks IMX6SL_CLK_GPU2D_PODF>; + }; + + pd_disp: power-domain@2 { + reg = <2>; + #power-domain-cells = <0>; + clocks = <&clks IMX6SL_CLK_LCDIF_AXI>, + <&clks IMX6SL_CLK_LCDIF_PIX>, + <&clks IMX6SL_CLK_EPDC_AXI>, + <&clks IMX6SL_CLK_EPDC_PIX>, + <&clks IMX6SL_CLK_PXP_AXI>; + }; + }; }; gpr: iomuxc-gpr@20e0000 { @@ -738,6 +765,7 @@ <&clks IMX6SL_CLK_DUMMY>; clock-names = "pix", "axi", "disp_axi"; status = "disabled"; + power-domains = <&pd_disp>; }; dcp: dcp@20fc000 { @@ -921,5 +949,25 @@ status = "disabled"; }; }; + + gpu_2d: gpu@2200000 { + compatible = "vivante,gc"; + reg = <0x02200000 0x4000>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, + <&clks IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <&pd_pu>; + }; + + gpu_vg: gpu@2204000 { + compatible = "vivante,gc"; + reg = <0x02204000 0x4000>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SL_CLK_MMDC_ROOT>, + <&clks IMX6SL_CLK_GPU2D_OVG>; + clock-names = "bus", "core"; + power-domains = <&pd_pu>; + }; }; }; diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts new file mode 100644 index 000000000000..c8e115564ba2 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-evk.dts @@ -0,0 +1,463 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sll.dtsi" + +/ { + model = "Freescale i.MX6SLL EVK Board"; + compatible = "fsl,imx6sll-evk", "fsl,imx6sll"; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + reg = <0x80000000 0x80000000>; + }; + + backlight_display: backlight-display { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + + reg_usb_otg1_vbus: regulator-otg1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_vbus>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator-otg2-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2_vbus>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_aud3v: regulator-aud3v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-3v15"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-boot-on; + }; + + reg_aud4v: regulator-aud4v { + compatible = "regulator-fixed"; + regulator-name = "wm8962-supply-4v2"; + regulator-min-microvolt = <4325000>; + regulator-max-microvolt = <4325000>; + regulator-boot-on; + }; + + reg_lcd_3v3: regulator-lcd-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; + regulator-name = "lcd-3v3"; + gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lcd_5v: regulator-lcd-5v { + compatible = "regulator-fixed"; + regulator-name = "lcd-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_sd1_vmmc: regulator-sd1-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd1_vmmc>; + regulator-name = "SD1_SPWR"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sd3_vmmc: regulator-sd3-vmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sd3_vmmc>; + regulator-name = "SD3_WIFI"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio4 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; +}; + +&cpu0 { + arm-supply = <&sw1a_reg>; + soc-supply = <&sw1c_reg>; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pfuze100: pmic@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&lcdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd>; + status = "okay"; + + port { + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + wakeup-source; + vmmc-supply = <®_sd1_vmmc>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg1>; + disable-over-current; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <®_sd3_vmmc>; + status = "okay"; +}; + +&iomuxc { + pinctrl_reg_sd3_vmmc: sd3vmmcgrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x17059 + >; + }; + + pinctrl_usb_otg1_vbus: vbus1grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 + >; + }; + + pinctrl_usb_otg2_vbus: vbus2grp { + fsl,pins = < + MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 + >; + }; + + pinctrl_reg_lcd_3v3: reglcd3v3grp { + fsl,pins = < + MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059 + >; + }; + + pinctrl_reg_sd1_vmmc: sd1vmmcgrp { + fsl,pins = < + MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1 + MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x13059 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130b9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9 + MX6SLL_PAD_SD1_CLK__SD1_CLK 0x130f9 + MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9 + MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9 + MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9 + MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9 + >; + }; + + pinctrl_usbotg1: usbotg1grp { + fsl,pins = < + MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x17061 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x13061 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x17061 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x17061 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x17061 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x17061 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170a1 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130a1 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170a1 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170a1 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170a1 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170a1 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz { + fsl,pins = < + MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170e9 + MX6SLL_PAD_SD3_CLK__SD3_CLK 0x130f9 + MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170e9 + MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170e9 + MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170e9 + MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170e9 + MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 + MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_lcd: lcdgrp { + fsl,pins = < + MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x79 + MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x79 + MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x79 + MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x79 + MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x79 + MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x79 + MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x79 + MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x79 + MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x79 + MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x79 + MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x79 + MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x79 + MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x79 + MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x79 + MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x79 + MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x79 + MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x79 + MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x79 + MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x79 + MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x79 + MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x79 + MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x79 + MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x79 + MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x79 + MX6SLL_PAD_LCD_CLK__LCD_CLK 0x79 + MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x79 + MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x79 + MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x79 + MX6SLL_PAD_LCD_RESET__LCD_RESET 0x79 + >; + }; + + pinctrl_pwm1: pmw1grp { + fsl,pins = < + MX6SLL_PAD_PWM1__PWM1_OUT 0x110b0 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6sll-pinfunc.h b/arch/arm/boot/dts/imx6sll-pinfunc.h new file mode 100644 index 000000000000..713a346f4c89 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll-pinfunc.h @@ -0,0 +1,880 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +#ifndef __DTS_IMX6SLL_PINFUNC_H +#define __DTS_IMX6SLL_PINFUNC_H + +/* + * The pin function ID is a tuple of + * <mux_reg conf_reg input_reg mux_mode input_val> + */ +#define MX6SLL_PAD_WDOG_B__WDOG1_B 0x0014 0x02DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_WDOG_B__WDOG1_RESET_B_DEB 0x0014 0x02DC 0x0000 0x1 0x0 +#define MX6SLL_PAD_WDOG_B__UART5_RI_B 0x0014 0x02DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_WDOG_B__GPIO3_IO18 0x0014 0x02DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__XTALOSC_REF_CLK_24M 0x0018 0x02E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x0018 0x02E0 0x068C 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_24M__PWM3_OUT 0x0018 0x02E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_24M__USB_OTG2_ID 0x0018 0x02E0 0x0560 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_24M__CCM_PMIC_READY 0x0018 0x02E0 0x05AC 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_24M__GPIO3_IO21 0x0018 0x02E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_24M__SD3_WP 0x0018 0x02E0 0x0794 0x6 0x0 +#define MX6SLL_PAD_REF_CLK_32K__XTALOSC_REF_CLK_32K 0x001C 0x02E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x001C 0x02E4 0x0690 0x1 0x0 +#define MX6SLL_PAD_REF_CLK_32K__PWM4_OUT 0x001C 0x02E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_REF_CLK_32K__USB_OTG1_ID 0x001C 0x02E4 0x055C 0x3 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD1_LCTL 0x001C 0x02E4 0x0000 0x4 0x0 +#define MX6SLL_PAD_REF_CLK_32K__GPIO3_IO22 0x001C 0x02E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_REF_CLK_32K__SD3_CD_B 0x001C 0x02E4 0x0780 0x6 0x0 +#define MX6SLL_PAD_PWM1__PWM1_OUT 0x0020 0x02E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_PWM1__CCM_CLKO 0x0020 0x02E8 0x0000 0x1 0x0 +#define MX6SLL_PAD_PWM1__AUDIO_CLK_OUT 0x0020 0x02E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_PWM1__CSI_MCLK 0x0020 0x02E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_PWM1__GPIO3_IO23 0x0020 0x02E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_PWM1__EPIT1_OUT 0x0020 0x02E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL0__KEY_COL0 0x0024 0x02EC 0x06A0 0x0 0x0 +#define MX6SLL_PAD_KEY_COL0__I2C2_SCL 0x0024 0x02EC 0x0684 0x1 0x0 +#define MX6SLL_PAD_KEY_COL0__LCD_DATA00 0x0024 0x02EC 0x06D8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL0__SD1_CD_B 0x0024 0x02EC 0x0770 0x4 0x1 +#define MX6SLL_PAD_KEY_COL0__GPIO3_IO24 0x0024 0x02EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW0__KEY_ROW0 0x0028 0x02F0 0x06C0 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW0__I2C2_SDA 0x0028 0x02F0 0x0688 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW0__LCD_DATA01 0x0028 0x02F0 0x06DC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW0__SD1_WP 0x0028 0x02F0 0x0774 0x4 0x1 +#define MX6SLL_PAD_KEY_ROW0__GPIO3_IO25 0x0028 0x02F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL1__KEY_COL1 0x002C 0x02F4 0x06A4 0x0 0x0 +#define MX6SLL_PAD_KEY_COL1__ECSPI4_MOSI 0x002C 0x02F4 0x0658 0x1 0x1 +#define MX6SLL_PAD_KEY_COL1__LCD_DATA02 0x002C 0x02F4 0x06E0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL1__SD3_DATA4 0x002C 0x02F4 0x0784 0x4 0x0 +#define MX6SLL_PAD_KEY_COL1__GPIO3_IO26 0x002C 0x02F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW1__KEY_ROW1 0x0030 0x02F8 0x06C4 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW1__ECSPI4_MISO 0x0030 0x02F8 0x0654 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW1__LCD_DATA03 0x0030 0x02F8 0x06E4 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW1__CSI_FIELD 0x0030 0x02F8 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW1__SD3_DATA5 0x0030 0x02F8 0x0788 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW1__GPIO3_IO27 0x0030 0x02F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL2__KEY_COL2 0x0034 0x02FC 0x06A8 0x0 0x0 +#define MX6SLL_PAD_KEY_COL2__ECSPI4_SS0 0x0034 0x02FC 0x065C 0x1 0x1 +#define MX6SLL_PAD_KEY_COL2__LCD_DATA04 0x0034 0x02FC 0x06E8 0x2 0x0 +#define MX6SLL_PAD_KEY_COL2__CSI_DATA12 0x0034 0x02FC 0x05B8 0x3 0x1 +#define MX6SLL_PAD_KEY_COL2__SD3_DATA6 0x0034 0x02FC 0x078C 0x4 0x0 +#define MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x0034 0x02FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW2__KEY_ROW2 0x0038 0x0300 0x06C8 0x0 0x0 +#define MX6SLL_PAD_KEY_ROW2__ECSPI4_SCLK 0x0038 0x0300 0x0650 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW2__LCD_DATA05 0x0038 0x0300 0x06EC 0x2 0x0 +#define MX6SLL_PAD_KEY_ROW2__CSI_DATA13 0x0038 0x0300 0x05BC 0x3 0x1 +#define MX6SLL_PAD_KEY_ROW2__SD3_DATA7 0x0038 0x0300 0x0790 0x4 0x0 +#define MX6SLL_PAD_KEY_ROW2__GPIO3_IO29 0x0038 0x0300 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__KEY_COL3 0x003C 0x0304 0x06AC 0x0 0x0 +#define MX6SLL_PAD_KEY_COL3__AUD6_RXFS 0x003C 0x0304 0x05A0 0x1 0x1 +#define MX6SLL_PAD_KEY_COL3__LCD_DATA06 0x003C 0x0304 0x06F0 0x2 0x0 +#define MX6SLL_PAD_KEY_COL3__CSI_DATA14 0x003C 0x0304 0x05C0 0x3 0x1 +#define MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x003C 0x0304 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL3__SD1_RESET 0x003C 0x0304 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW3__KEY_ROW3 0x0040 0x0308 0x06CC 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW3__AUD6_RXC 0x0040 0x0308 0x059C 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW3__LCD_DATA07 0x0040 0x0308 0x06F4 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW3__CSI_DATA15 0x0040 0x0308 0x05C4 0x3 0x2 +#define MX6SLL_PAD_KEY_ROW3__GPIO3_IO31 0x0040 0x0308 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW3__SD1_VSELECT 0x0040 0x0308 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL4__KEY_COL4 0x0044 0x030C 0x06B0 0x0 0x1 +#define MX6SLL_PAD_KEY_COL4__AUD6_RXD 0x0044 0x030C 0x0594 0x1 0x1 +#define MX6SLL_PAD_KEY_COL4__LCD_DATA08 0x0044 0x030C 0x06F8 0x2 0x1 +#define MX6SLL_PAD_KEY_COL4__CSI_DATA16 0x0044 0x030C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x0044 0x030C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL4__USB_OTG1_PWR 0x0044 0x030C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW4__KEY_ROW4 0x0048 0x0310 0x06D0 0x0 0x1 +#define MX6SLL_PAD_KEY_ROW4__AUD6_TXC 0x0048 0x0310 0x05A4 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW4__LCD_DATA09 0x0048 0x0310 0x06FC 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW4__CSI_DATA17 0x0048 0x0310 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW4__GPIO4_IO01 0x0048 0x0310 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW4__USB_OTG1_OC 0x0048 0x0310 0x076C 0x6 0x2 +#define MX6SLL_PAD_KEY_COL5__KEY_COL5 0x004C 0x0314 0x0694 0x0 0x1 +#define MX6SLL_PAD_KEY_COL5__AUD6_TXFS 0x004C 0x0314 0x05A8 0x1 0x1 +#define MX6SLL_PAD_KEY_COL5__LCD_DATA10 0x004C 0x0314 0x0700 0x2 0x0 +#define MX6SLL_PAD_KEY_COL5__CSI_DATA18 0x004C 0x0314 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x004C 0x0314 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL5__USB_OTG2_PWR 0x004C 0x0314 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW5__KEY_ROW5 0x0050 0x0318 0x06B4 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW5__AUD6_TXD 0x0050 0x0318 0x0598 0x1 0x1 +#define MX6SLL_PAD_KEY_ROW5__LCD_DATA11 0x0050 0x0318 0x0704 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW5__CSI_DATA19 0x0050 0x0318 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x0050 0x0318 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW5__USB_OTG2_OC 0x0050 0x0318 0x0768 0x6 0x3 +#define MX6SLL_PAD_KEY_COL6__KEY_COL6 0x0054 0x031C 0x0698 0x0 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DCE_RX 0x0054 0x031C 0x075C 0x1 0x2 +#define MX6SLL_PAD_KEY_COL6__UART4_DTE_TX 0x0054 0x031C 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL6__LCD_DATA12 0x0054 0x031C 0x0708 0x2 0x1 +#define MX6SLL_PAD_KEY_COL6__CSI_DATA20 0x0054 0x031C 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL6__GPIO4_IO04 0x0054 0x031C 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL6__SD3_RESET 0x0054 0x031C 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_ROW6__KEY_ROW6 0x0058 0x0320 0x06B8 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW6__UART4_DCE_TX 0x0058 0x0320 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW6__UART4_DTE_RX 0x0058 0x0320 0x075C 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW6__LCD_DATA13 0x0058 0x0320 0x070C 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW6__CSI_DATA21 0x0058 0x0320 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW6__GPIO4_IO05 0x0058 0x0320 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW6__SD3_VSELECT 0x0058 0x0320 0x0000 0x6 0x0 +#define MX6SLL_PAD_KEY_COL7__KEY_COL7 0x005C 0x0324 0x069C 0x0 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DCE_RTS 0x005C 0x0324 0x0758 0x1 0x2 +#define MX6SLL_PAD_KEY_COL7__UART4_DTE_CTS 0x005C 0x0324 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_COL7__LCD_DATA14 0x005C 0x0324 0x0710 0x2 0x1 +#define MX6SLL_PAD_KEY_COL7__CSI_DATA22 0x005C 0x0324 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_COL7__GPIO4_IO06 0x005C 0x0324 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_COL7__SD1_WP 0x005C 0x0324 0x0774 0x6 0x3 +#define MX6SLL_PAD_KEY_ROW7__KEY_ROW7 0x0060 0x0328 0x06BC 0x0 0x2 +#define MX6SLL_PAD_KEY_ROW7__UART4_DCE_CTS 0x0060 0x0328 0x0000 0x1 0x0 +#define MX6SLL_PAD_KEY_ROW7__UART4_DTE_RTS 0x0060 0x0328 0x0758 0x1 0x3 +#define MX6SLL_PAD_KEY_ROW7__LCD_DATA15 0x0060 0x0328 0x0714 0x2 0x1 +#define MX6SLL_PAD_KEY_ROW7__CSI_DATA23 0x0060 0x0328 0x0000 0x3 0x0 +#define MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x0060 0x0328 0x0000 0x5 0x0 +#define MX6SLL_PAD_KEY_ROW7__SD1_CD_B 0x0060 0x0328 0x0770 0x6 0x3 +#define MX6SLL_PAD_EPDC_DATA00__EPDC_DATA00 0x0064 0x032C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA00__ECSPI4_MOSI 0x0064 0x032C 0x0658 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA00__LCD_DATA24 0x0064 0x032C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA00__CSI_DATA00 0x0064 0x032C 0x05C8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA00__GPIO1_IO07 0x0064 0x032C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA01__EPDC_DATA01 0x0068 0x0330 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA01__ECSPI4_MISO 0x0068 0x0330 0x0654 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA01__LCD_DATA25 0x0068 0x0330 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA01__CSI_DATA01 0x0068 0x0330 0x05CC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA01__GPIO1_IO08 0x0068 0x0330 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA02__EPDC_DATA02 0x006C 0x0334 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA02__ECSPI4_SS0 0x006C 0x0334 0x065C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA02__LCD_DATA26 0x006C 0x0334 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA02__CSI_DATA02 0x006C 0x0334 0x05D0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA02__GPIO1_IO09 0x006C 0x0334 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA03__EPDC_DATA03 0x0070 0x0338 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA03__ECSPI4_SCLK 0x0070 0x0338 0x0650 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA03__LCD_DATA27 0x0070 0x0338 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA03__CSI_DATA03 0x0070 0x0338 0x05D4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA03__GPIO1_IO10 0x0070 0x0338 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA04__EPDC_DATA04 0x0074 0x033C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA04__ECSPI4_SS1 0x0074 0x033C 0x0660 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA04__LCD_DATA28 0x0074 0x033C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA04__CSI_DATA04 0x0074 0x033C 0x05D8 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA04__GPIO1_IO11 0x0074 0x033C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA05__EPDC_DATA05 0x0078 0x0340 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA05__ECSPI4_SS2 0x0078 0x0340 0x0664 0x1 0x1 +#define MX6SLL_PAD_EPDC_DATA05__LCD_DATA29 0x0078 0x0340 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA05__CSI_DATA05 0x0078 0x0340 0x05DC 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA05__GPIO1_IO12 0x0078 0x0340 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA06__EPDC_DATA06 0x007C 0x0344 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA06__ECSPI4_SS3 0x007C 0x0344 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA06__LCD_DATA30 0x007C 0x0344 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA06__CSI_DATA06 0x007C 0x0344 0x05E0 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA06__GPIO1_IO13 0x007C 0x0344 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA07__EPDC_DATA07 0x0080 0x0348 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA07__ECSPI4_RDY 0x0080 0x0348 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA07__LCD_DATA31 0x0080 0x0348 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA07__CSI_DATA07 0x0080 0x0348 0x05E4 0x3 0x2 +#define MX6SLL_PAD_EPDC_DATA07__GPIO1_IO14 0x0080 0x0348 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_DATA08 0x0084 0x034C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA08__ECSPI3_MOSI 0x0084 0x034C 0x063C 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA08__EPDC_PWR_CTRL0 0x0084 0x034C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA08__GPIO1_IO15 0x0084 0x034C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_DATA09 0x0088 0x0350 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA09__ECSPI3_MISO 0x0088 0x0350 0x0638 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA09__EPDC_PWR_CTRL1 0x0088 0x0350 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA09__GPIO1_IO16 0x0088 0x0350 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_DATA10 0x008C 0x0354 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA10__ECSPI3_SS0 0x008C 0x0354 0x0648 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA10__EPDC_PWR_CTRL2 0x008C 0x0354 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA10__GPIO1_IO17 0x008C 0x0354 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_DATA11 0x0090 0x0358 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA11__ECSPI3_SCLK 0x0090 0x0358 0x0630 0x1 0x2 +#define MX6SLL_PAD_EPDC_DATA11__EPDC_PWR_CTRL3 0x0090 0x0358 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA11__GPIO1_IO18 0x0090 0x0358 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_DATA12 0x0094 0x035C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DCE_RX 0x0094 0x035C 0x074C 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA12__UART2_DTE_TX 0x0094 0x035C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA12__EPDC_PWR_COM 0x0094 0x035C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA12__GPIO1_IO19 0x0094 0x035C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA12__ECSPI3_SS1 0x0094 0x035C 0x064C 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_DATA13 0x0098 0x0360 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DCE_TX 0x0098 0x0360 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA13__UART2_DTE_RX 0x0098 0x0360 0x074C 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA13__EPDC_PWR_IRQ 0x0098 0x0360 0x0668 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA13__GPIO1_IO20 0x0098 0x0360 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA13__ECSPI3_SS2 0x0098 0x0360 0x0640 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_DATA14 0x009C 0x0364 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DCE_RTS 0x009C 0x0364 0x0748 0x1 0x4 +#define MX6SLL_PAD_EPDC_DATA14__UART2_DTE_CTS 0x009C 0x0364 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA14__EPDC_PWR_STAT 0x009C 0x0364 0x066C 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA14__GPIO1_IO21 0x009C 0x0364 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA14__ECSPI3_SS3 0x009C 0x0364 0x0644 0x6 0x1 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_DATA15 0x00A0 0x0368 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DCE_CTS 0x00A0 0x0368 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_DATA15__UART2_DTE_RTS 0x00A0 0x0368 0x0748 0x1 0x5 +#define MX6SLL_PAD_EPDC_DATA15__EPDC_PWR_WAKE 0x00A0 0x0368 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_DATA15__GPIO1_IO22 0x00A0 0x0368 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_DATA15__ECSPI3_RDY 0x00A0 0x0368 0x0634 0x6 0x1 +#define MX6SLL_PAD_EPDC_SDCLK__EPDC_SDCLK_P 0x00A4 0x036C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCLK__ECSPI2_MOSI 0x00A4 0x036C 0x0624 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__I2C2_SCL 0x00A4 0x036C 0x0684 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__CSI_DATA08 0x00A4 0x036C 0x05E8 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDCLK__GPIO1_IO23 0x00A4 0x036C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDLE__EPDC_SDLE 0x00A8 0x0370 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDLE__ECSPI2_MISO 0x00A8 0x0370 0x0620 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDLE__I2C2_SDA 0x00A8 0x0370 0x0688 0x2 0x2 +#define MX6SLL_PAD_EPDC_SDLE__CSI_DATA09 0x00A8 0x0370 0x05EC 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDLE__GPIO1_IO24 0x00A8 0x0370 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDOE__EPDC_SDOE 0x00AC 0x0374 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDOE__ECSPI2_SS0 0x00AC 0x0374 0x0628 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDOE__CSI_DATA10 0x00AC 0x0374 0x05B0 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDOE__GPIO1_IO25 0x00AC 0x0374 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDSHR 0x00B0 0x0378 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__ECSPI2_SCLK 0x00B0 0x0378 0x061C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__EPDC_SDCE4 0x00B0 0x0378 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDSHR__CSI_DATA11 0x00B0 0x0378 0x05B4 0x3 0x2 +#define MX6SLL_PAD_EPDC_SDSHR__GPIO1_IO26 0x00B0 0x0378 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__EPDC_SDCE0 0x00B4 0x037C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__ECSPI2_SS1 0x00B4 0x037C 0x062C 0x1 0x1 +#define MX6SLL_PAD_EPDC_SDCE0__PWM3_OUT 0x00B4 0x037C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE0__GPIO1_IO27 0x00B4 0x037C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__EPDC_SDCE1 0x00B8 0x0380 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__WDOG2_B 0x00B8 0x0380 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__PWM4_OUT 0x00B8 0x0380 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE1__GPIO1_IO28 0x00B8 0x0380 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__EPDC_SDCE2 0x00BC 0x0384 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__I2C3_SCL 0x00BC 0x0384 0x068C 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE2__PWM1_OUT 0x00BC 0x0384 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE2__GPIO1_IO29 0x00BC 0x0384 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__EPDC_SDCE3 0x00C0 0x0388 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__I2C3_SDA 0x00C0 0x0388 0x0690 0x1 0x2 +#define MX6SLL_PAD_EPDC_SDCE3__PWM2_OUT 0x00C0 0x0388 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_SDCE3__GPIO1_IO30 0x00C0 0x0388 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__EPDC_GDCLK 0x00C4 0x038C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__ECSPI2_SS2 0x00C4 0x038C 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__CSI_PIXCLK 0x00C4 0x038C 0x05F4 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDCLK__GPIO1_IO31 0x00C4 0x038C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDCLK__SD2_RESET 0x00C4 0x038C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDOE__EPDC_GDOE 0x00C8 0x0390 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDOE__ECSPI2_SS3 0x00C8 0x0390 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDOE__CSI_HSYNC 0x00C8 0x0390 0x05F0 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDOE__GPIO2_IO00 0x00C8 0x0390 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDOE__SD2_VSELECT 0x00C8 0x0390 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_GDRL__EPDC_GDRL 0x00CC 0x0394 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDRL__ECSPI2_RDY 0x00CC 0x0394 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDRL__CSI_MCLK 0x00CC 0x0394 0x0000 0x3 0x0 +#define MX6SLL_PAD_EPDC_GDRL__GPIO2_IO01 0x00CC 0x0394 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDRL__SD2_WP 0x00CC 0x0394 0x077C 0x6 0x2 +#define MX6SLL_PAD_EPDC_GDSP__EPDC_GDSP 0x00D0 0x0398 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_GDSP__PWM4_OUT 0x00D0 0x0398 0x0000 0x1 0x0 +#define MX6SLL_PAD_EPDC_GDSP__CSI_VSYNC 0x00D0 0x0398 0x05F8 0x3 0x2 +#define MX6SLL_PAD_EPDC_GDSP__GPIO2_IO02 0x00D0 0x0398 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_GDSP__SD2_CD_B 0x00D0 0x0398 0x0778 0x6 0x2 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_VCOM0 0x00D4 0x039C 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__AUD5_RXFS 0x00D4 0x039C 0x0588 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DCE_RX 0x00D4 0x039C 0x0754 0x2 0x4 +#define MX6SLL_PAD_EPDC_VCOM0__UART3_DTE_TX 0x00D4 0x039C 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__GPIO2_IO03 0x00D4 0x039C 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM0__EPDC_SDCE5 0x00D4 0x039C 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_VCOM1 0x00D8 0x03A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__AUD5_RXD 0x00D8 0x03A0 0x057C 0x1 0x1 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DCE_TX 0x00D8 0x03A0 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__UART3_DTE_RX 0x00D8 0x03A0 0x0754 0x2 0x5 +#define MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 0x00D8 0x03A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_VCOM1__EPDC_SDCE6 0x00D8 0x03A0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_BDR0 0x00DC 0x03A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DCE_RTS 0x00DC 0x03A4 0x0750 0x2 0x2 +#define MX6SLL_PAD_EPDC_BDR0__UART3_DTE_CTS 0x00DC 0x03A4 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR0__GPIO2_IO05 0x00DC 0x03A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR0__EPDC_SDCE7 0x00DC 0x03A4 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_BDR1 0x00E0 0x03A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DCE_CTS 0x00E0 0x03A8 0x0000 0x2 0x0 +#define MX6SLL_PAD_EPDC_BDR1__UART3_DTE_RTS 0x00E0 0x03A8 0x0750 0x2 0x3 +#define MX6SLL_PAD_EPDC_BDR1__GPIO2_IO06 0x00E0 0x03A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_BDR1__EPDC_SDCE8 0x00E0 0x03A8 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__EPDC_PWR_CTRL0 0x00E4 0x03AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__AUD5_RXC 0x00E4 0x03AC 0x0584 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__LCD_DATA16 0x00E4 0x03AC 0x0718 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL0__GPIO2_IO07 0x00E4 0x03AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__EPDC_PWR_CTRL1 0x00E8 0x03B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__AUD5_TXFS 0x00E8 0x03B0 0x0590 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__LCD_DATA17 0x00E8 0x03B0 0x071C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL1__GPIO2_IO08 0x00E8 0x03B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__EPDC_PWR_CTRL2 0x00EC 0x03B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__AUD5_TXD 0x00EC 0x03B4 0x0580 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__LCD_DATA18 0x00EC 0x03B4 0x0720 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL2__GPIO2_IO09 0x00EC 0x03B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__EPDC_PWR_CTRL3 0x00F0 0x03B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__AUD5_TXC 0x00F0 0x03B8 0x058C 0x1 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__LCD_DATA19 0x00F0 0x03B8 0x0724 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x00F0 0x03B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__EPDC_PWR_COM 0x00F4 0x03BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__LCD_DATA20 0x00F4 0x03BC 0x0728 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x00F4 0x03BC 0x055C 0x4 0x4 +#define MX6SLL_PAD_EPDC_PWR_COM__GPIO2_IO11 0x00F4 0x03BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_COM__SD3_RESET 0x00F4 0x03BC 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__EPDC_PWR_IRQ 0x00F8 0x03C0 0x0668 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__LCD_DATA21 0x00F8 0x03C0 0x072C 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_IRQ__USB_OTG2_ID 0x00F8 0x03C0 0x0560 0x4 0x3 +#define MX6SLL_PAD_EPDC_PWR_IRQ__GPIO2_IO12 0x00F8 0x03C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_IRQ__SD3_VSELECT 0x00F8 0x03C0 0x0000 0x6 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__EPDC_PWR_STAT 0x00FC 0x03C4 0x066C 0x0 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__LCD_DATA22 0x00FC 0x03C4 0x0730 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_STAT__ARM_EVENTI 0x00FC 0x03C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__GPIO2_IO13 0x00FC 0x03C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_STAT__SD3_WP 0x00FC 0x03C4 0x0794 0x6 0x2 +#define MX6SLL_PAD_EPDC_PWR_WAKE__EPDC_PWR_WAKE 0x0100 0x03C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__LCD_DATA23 0x0100 0x03C8 0x0734 0x2 0x1 +#define MX6SLL_PAD_EPDC_PWR_WAKE__ARM_EVENTO 0x0100 0x03C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__GPIO2_IO14 0x0100 0x03C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_EPDC_PWR_WAKE__SD3_CD_B 0x0100 0x03C8 0x0780 0x6 0x2 +#define MX6SLL_PAD_LCD_CLK__LCD_CLK 0x0104 0x03CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_CLK__LCD_WR_RWN 0x0104 0x03CC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_CLK__PWM4_OUT 0x0104 0x03CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x0104 0x03CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_ENABLE 0x0108 0x03D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_ENABLE__LCD_RD_E 0x0108 0x03D0 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DCE_RX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__UART2_DTE_TX 0x0108 0x03D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x0108 0x03D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_HSYNC 0x010C 0x03D4 0x06D4 0x0 0x0 +#define MX6SLL_PAD_LCD_HSYNC__LCD_CS 0x010C 0x03D4 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DCE_TX 0x010C 0x03D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_HSYNC__UART2_DTE_RX 0x010C 0x03D4 0x074C 0x4 0x1 +#define MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x010C 0x03D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_HSYNC__ARM_TRACE_CLK 0x010C 0x03D4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_VSYNC 0x0110 0x03D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_VSYNC__LCD_RS 0x0110 0x03D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DCE_RTS 0x0110 0x03D8 0x0748 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__UART2_DTE_CTS 0x0110 0x03D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x0110 0x03D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_VSYNC__ARM_TRACE_CTL 0x0110 0x03D8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_RESET 0x0114 0x03DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_LCD_RESET__LCD_BUSY 0x0114 0x03DC 0x06D4 0x2 0x1 +#define MX6SLL_PAD_LCD_RESET__UART2_DCE_CTS 0x0114 0x03DC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_RESET__UART2_DTE_RTS 0x0114 0x03DC 0x0748 0x4 0x1 +#define MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x0114 0x03DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_RESET__CCM_PMIC_READY 0x0114 0x03DC 0x05AC 0x6 0x2 +#define MX6SLL_PAD_LCD_DATA00__LCD_DATA00 0x0118 0x03E0 0x06D8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA00__ECSPI1_MOSI 0x0118 0x03E0 0x0608 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA00__USB_OTG2_ID 0x0118 0x03E0 0x0560 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA00__PWM1_OUT 0x0118 0x03E0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA00__UART5_DTR_B 0x0118 0x03E0 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA00__GPIO2_IO20 0x0118 0x03E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA00__ARM_TRACE00 0x0118 0x03E0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA00__SRC_BOOT_CFG00 0x0118 0x03E0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA01__LCD_DATA01 0x011C 0x03E4 0x06DC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA01__ECSPI1_MISO 0x011C 0x03E4 0x0604 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA01__USB_OTG1_ID 0x011C 0x03E4 0x055C 0x2 0x3 +#define MX6SLL_PAD_LCD_DATA01__PWM2_OUT 0x011C 0x03E4 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA01__AUD4_RXFS 0x011C 0x03E4 0x0570 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x011C 0x03E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA01__ARM_TRACE01 0x011C 0x03E4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA01__SRC_BOOT_CFG01 0x011C 0x03E4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA02__LCD_DATA02 0x0120 0x03E8 0x06E0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA02__ECSPI1_SS0 0x0120 0x03E8 0x0614 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA02__EPIT2_OUT 0x0120 0x03E8 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA02__PWM3_OUT 0x0120 0x03E8 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA02__AUD4_RXC 0x0120 0x03E8 0x056C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA02__GPIO2_IO22 0x0120 0x03E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA02__ARM_TRACE02 0x0120 0x03E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA02__SRC_BOOT_CFG02 0x0120 0x03E8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA03__LCD_DATA03 0x0124 0x03EC 0x06E4 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA03__ECSPI1_SCLK 0x0124 0x03EC 0x05FC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA03__UART5_DSR_B 0x0124 0x03EC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA03__PWM4_OUT 0x0124 0x03EC 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA03__AUD4_RXD 0x0124 0x03EC 0x0564 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA03__GPIO2_IO23 0x0124 0x03EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA03__ARM_TRACE03 0x0124 0x03EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA03__SRC_BOOT_CFG03 0x0124 0x03EC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA04__LCD_DATA04 0x0128 0x03F0 0x06E8 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA04__ECSPI1_SS1 0x0128 0x03F0 0x060C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA04__CSI_VSYNC 0x0128 0x03F0 0x05F8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA04__WDOG2_RESET_B_DEB 0x0128 0x03F0 0x0000 0x3 0x0 +#define MX6SLL_PAD_LCD_DATA04__AUD4_TXC 0x0128 0x03F0 0x0574 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x0128 0x03F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA04__ARM_TRACE04 0x0128 0x03F0 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA04__SRC_BOOT_CFG04 0x0128 0x03F0 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA05__LCD_DATA05 0x012C 0x03F4 0x06EC 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA05__ECSPI1_SS2 0x012C 0x03F4 0x0610 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA05__CSI_HSYNC 0x012C 0x03F4 0x05F0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA05__AUD4_TXFS 0x012C 0x03F4 0x0578 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x012C 0x03F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA05__ARM_TRACE05 0x012C 0x03F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA05__SRC_BOOT_CFG05 0x012C 0x03F4 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA06__LCD_DATA06 0x0130 0x03F8 0x06F0 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA06__ECSPI1_SS3 0x0130 0x03F8 0x0618 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA06__CSI_PIXCLK 0x0130 0x03F8 0x05F4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA06__AUD4_TXD 0x0130 0x03F8 0x0568 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x0130 0x03F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA06__ARM_TRACE06 0x0130 0x03F8 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA06__SRC_BOOT_CFG06 0x0130 0x03F8 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA07__LCD_DATA07 0x0134 0x03FC 0x06F4 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA07__ECSPI1_RDY 0x0134 0x03FC 0x0600 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA07__CSI_MCLK 0x0134 0x03FC 0x0000 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA07__AUDIO_CLK_OUT 0x0134 0x03FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x0134 0x03FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA07__ARM_TRACE07 0x0134 0x03FC 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA07__SRC_BOOT_CFG07 0x0134 0x03FC 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA08__LCD_DATA08 0x0138 0x0400 0x06F8 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA08__KEY_COL0 0x0138 0x0400 0x06A0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA08__CSI_DATA09 0x0138 0x0400 0x05EC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA08__ECSPI2_SCLK 0x0138 0x0400 0x061C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x0138 0x0400 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA08__ARM_TRACE08 0x0138 0x0400 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA08__SRC_BOOT_CFG08 0x0138 0x0400 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA09__LCD_DATA09 0x013C 0x0404 0x06FC 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA09__KEY_ROW0 0x013C 0x0404 0x06C0 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA09__CSI_DATA08 0x013C 0x0404 0x05E8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA09__ECSPI2_MOSI 0x013C 0x0404 0x0624 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x013C 0x0404 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA09__ARM_TRACE09 0x013C 0x0404 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA09__SRC_BOOT_CFG09 0x013C 0x0404 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA10__LCD_DATA10 0x0140 0x0408 0x0700 0x0 0x1 +#define MX6SLL_PAD_LCD_DATA10__KEY_COL1 0x0140 0x0408 0x06A4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA10__CSI_DATA07 0x0140 0x0408 0x05E4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA10__ECSPI2_MISO 0x0140 0x0408 0x0620 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x0140 0x0408 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA10__ARM_TRACE10 0x0140 0x0408 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA10__SRC_BOOT_CFG10 0x0140 0x0408 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA11__LCD_DATA11 0x0144 0x040C 0x0704 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA11__KEY_ROW1 0x0144 0x040C 0x06C4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA11__CSI_DATA06 0x0144 0x040C 0x05E0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA11__ECSPI2_SS1 0x0144 0x040C 0x062C 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x0144 0x040C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA11__ARM_TRACE11 0x0144 0x040C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA11__SRC_BOOT_CFG11 0x0144 0x040C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA12__LCD_DATA12 0x0148 0x0410 0x0708 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA12__KEY_COL2 0x0148 0x0410 0x06A8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA12__CSI_DATA05 0x0148 0x0410 0x05DC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DCE_RTS 0x0148 0x0410 0x0760 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__UART5_DTE_CTS 0x0148 0x0410 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x0148 0x0410 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA12__ARM_TRACE12 0x0148 0x0410 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA12__SRC_BOOT_CFG12 0x0148 0x0410 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA13__LCD_DATA13 0x014C 0x0414 0x070C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA13__KEY_ROW2 0x014C 0x0414 0x06C8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA13__CSI_DATA04 0x014C 0x0414 0x05D8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DCE_CTS 0x014C 0x0414 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA13__UART5_DTE_RTS 0x014C 0x0414 0x0760 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x014C 0x0414 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA13__ARM_TRACE13 0x014C 0x0414 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA13__SRC_BOOT_CFG13 0x014C 0x0414 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA14__LCD_DATA14 0x0150 0x0418 0x0710 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA14__KEY_COL3 0x0150 0x0418 0x06AC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA14__CSI_DATA03 0x0150 0x0418 0x05D4 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DCE_RX 0x0150 0x0418 0x0764 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__UART5_DTE_TX 0x0150 0x0418 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x0150 0x0418 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA14__ARM_TRACE14 0x0150 0x0418 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA14__SRC_BOOT_CFG14 0x0150 0x0418 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA15__LCD_DATA15 0x0154 0x041C 0x0714 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA15__KEY_ROW3 0x0154 0x041C 0x06CC 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA15__CSI_DATA02 0x0154 0x041C 0x05D0 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DCE_TX 0x0154 0x041C 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA15__UART5_DTE_RX 0x0154 0x041C 0x0764 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x0154 0x041C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA15__ARM_TRACE15 0x0154 0x041C 0x0000 0x6 0x0 +#define MX6SLL_PAD_LCD_DATA15__SRC_BOOT_CFG15 0x0154 0x041C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA16__LCD_DATA16 0x0158 0x0420 0x0718 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA16__KEY_COL4 0x0158 0x0420 0x06B0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA16__CSI_DATA01 0x0158 0x0420 0x05CC 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA16__I2C2_SCL 0x0158 0x0420 0x0684 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x0158 0x0420 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA16__SRC_BOOT_CFG24 0x0158 0x0420 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA17__LCD_DATA17 0x015C 0x0424 0x071C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA17__KEY_ROW4 0x015C 0x0424 0x06D0 0x1 0x0 +#define MX6SLL_PAD_LCD_DATA17__CSI_DATA00 0x015C 0x0424 0x05C8 0x2 0x0 +#define MX6SLL_PAD_LCD_DATA17__I2C2_SDA 0x015C 0x0424 0x0688 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x015C 0x0424 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA17__SRC_BOOT_CFG25 0x015C 0x0424 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA18__LCD_DATA18 0x0160 0x0428 0x0720 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA18__KEY_COL5 0x0160 0x0428 0x0694 0x1 0x2 +#define MX6SLL_PAD_LCD_DATA18__CSI_DATA15 0x0160 0x0428 0x05C4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPT_CAPTURE1 0x0160 0x0428 0x0670 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x0160 0x0428 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA18__SRC_BOOT_CFG26 0x0160 0x0428 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA19__LCD_DATA19 0x0164 0x042C 0x0724 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA19__KEY_ROW5 0x0164 0x042C 0x06B4 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA19__CSI_DATA14 0x0164 0x042C 0x05C0 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA19__GPT_CAPTURE2 0x0164 0x042C 0x0674 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x0164 0x042C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA19__SRC_BOOT_CFG27 0x0164 0x042C 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA20__LCD_DATA20 0x0168 0x0430 0x0728 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA20__KEY_COL6 0x0168 0x0430 0x0698 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA20__CSI_DATA13 0x0168 0x0430 0x05BC 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA20__GPT_COMPARE1 0x0168 0x0430 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x0168 0x0430 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA20__SRC_BOOT_CFG28 0x0168 0x0430 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA21__LCD_DATA21 0x016C 0x0434 0x072C 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA21__KEY_ROW6 0x016C 0x0434 0x06B8 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA21__CSI_DATA12 0x016C 0x0434 0x05B8 0x2 0x2 +#define MX6SLL_PAD_LCD_DATA21__GPT_COMPARE2 0x016C 0x0434 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x016C 0x0434 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA21__SRC_BOOT_CFG29 0x016C 0x0434 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA22__LCD_DATA22 0x0170 0x0438 0x0730 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA22__KEY_COL7 0x0170 0x0438 0x069C 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA22__CSI_DATA11 0x0170 0x0438 0x05B4 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA22__GPT_COMPARE3 0x0170 0x0438 0x0000 0x4 0x0 +#define MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x0170 0x0438 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA22__SRC_BOOT_CFG30 0x0170 0x0438 0x0000 0x7 0x0 +#define MX6SLL_PAD_LCD_DATA23__LCD_DATA23 0x0174 0x043C 0x0734 0x0 0x0 +#define MX6SLL_PAD_LCD_DATA23__KEY_ROW7 0x0174 0x043C 0x06BC 0x1 0x1 +#define MX6SLL_PAD_LCD_DATA23__CSI_DATA10 0x0174 0x043C 0x05B0 0x2 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPT_CLKIN 0x0174 0x043C 0x0678 0x4 0x1 +#define MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x0174 0x043C 0x0000 0x5 0x0 +#define MX6SLL_PAD_LCD_DATA23__SRC_BOOT_CFG31 0x0174 0x043C 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXFS__AUD3_RXFS 0x0178 0x0440 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C1_SCL 0x0178 0x0440 0x067C 0x1 0x1 +#define MX6SLL_PAD_AUD_RXFS__UART3_DCE_RX 0x0178 0x0440 0x0754 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__UART3_DTE_TX 0x0178 0x0440 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXFS__I2C3_SCL 0x0178 0x0440 0x068C 0x4 0x1 +#define MX6SLL_PAD_AUD_RXFS__GPIO1_IO00 0x0178 0x0440 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXFS__ECSPI3_SS0 0x0178 0x0440 0x0648 0x6 0x0 +#define MX6SLL_PAD_AUD_RXFS__MBIST_BEND 0x0178 0x0440 0x0000 0x7 0x0 +#define MX6SLL_PAD_AUD_RXC__AUD3_RXC 0x017C 0x0444 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXC__I2C1_SDA 0x017C 0x0444 0x0680 0x1 0x1 +#define MX6SLL_PAD_AUD_RXC__UART3_DCE_TX 0x017C 0x0444 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXC__UART3_DTE_RX 0x017C 0x0444 0x0754 0x2 0x1 +#define MX6SLL_PAD_AUD_RXC__I2C3_SDA 0x017C 0x0444 0x0690 0x4 0x1 +#define MX6SLL_PAD_AUD_RXC__GPIO1_IO01 0x017C 0x0444 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_RXC__ECSPI3_SS1 0x017C 0x0444 0x064C 0x6 0x0 +#define MX6SLL_PAD_AUD_RXD__AUD3_RXD 0x0180 0x0448 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_RXD__ECSPI3_MOSI 0x0180 0x0448 0x063C 0x1 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DCE_RX 0x0180 0x0448 0x075C 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__UART4_DTE_TX 0x0180 0x0448 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_RXD__SD1_LCTL 0x0180 0x0448 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_RXD__GPIO1_IO02 0x0180 0x0448 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXC__AUD3_TXC 0x0184 0x044C 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXC__ECSPI3_MISO 0x0184 0x044C 0x0638 0x1 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DCE_TX 0x0184 0x044C 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXC__UART4_DTE_RX 0x0184 0x044C 0x075C 0x2 0x1 +#define MX6SLL_PAD_AUD_TXC__SD2_LCTL 0x0184 0x044C 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXC__GPIO1_IO03 0x0184 0x044C 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXFS__AUD3_TXFS 0x0188 0x0450 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXFS__PWM3_OUT 0x0188 0x0450 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DCE_RTS 0x0188 0x0450 0x0758 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__UART4_DTE_CTS 0x0188 0x0450 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXFS__SD3_LCTL 0x0188 0x0450 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_TXFS__GPIO1_IO04 0x0188 0x0450 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_TXD__AUD3_TXD 0x018C 0x0454 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_TXD__ECSPI3_SCLK 0x018C 0x0454 0x0630 0x1 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DCE_CTS 0x018C 0x0454 0x0000 0x2 0x0 +#define MX6SLL_PAD_AUD_TXD__UART4_DTE_RTS 0x018C 0x0454 0x0758 0x2 0x1 +#define MX6SLL_PAD_AUD_TXD__GPIO1_IO05 0x018C 0x0454 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x0190 0x0458 0x0000 0x0 0x0 +#define MX6SLL_PAD_AUD_MCLK__PWM4_OUT 0x0190 0x0458 0x0000 0x1 0x0 +#define MX6SLL_PAD_AUD_MCLK__ECSPI3_RDY 0x0190 0x0458 0x0634 0x2 0x0 +#define MX6SLL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x0190 0x0458 0x0000 0x4 0x0 +#define MX6SLL_PAD_AUD_MCLK__GPIO1_IO06 0x0190 0x0458 0x0000 0x5 0x0 +#define MX6SLL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x0190 0x0458 0x073C 0x6 0x1 +#define MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x0194 0x045C 0x0744 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__UART1_DTE_TX 0x0194 0x045C 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_RXD__PWM1_OUT 0x0194 0x045C 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_RXD__UART4_DCE_RX 0x0194 0x045C 0x075C 0x2 0x4 +#define MX6SLL_PAD_UART1_RXD__UART4_DTE_TX 0x0194 0x045C 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_RXD__UART5_DCE_RX 0x0194 0x045C 0x0764 0x4 0x6 +#define MX6SLL_PAD_UART1_RXD__UART5_DTE_TX 0x0194 0x045C 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_RXD__GPIO3_IO16 0x0194 0x045C 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x0198 0x0460 0x0000 0x0 0x0 +#define MX6SLL_PAD_UART1_TXD__UART1_DTE_RX 0x0198 0x0460 0x0744 0x0 0x1 +#define MX6SLL_PAD_UART1_TXD__PWM2_OUT 0x0198 0x0460 0x0000 0x1 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DCE_TX 0x0198 0x0460 0x0000 0x2 0x0 +#define MX6SLL_PAD_UART1_TXD__UART4_DTE_RX 0x0198 0x0460 0x075C 0x2 0x5 +#define MX6SLL_PAD_UART1_TXD__UART5_DCE_TX 0x0198 0x0460 0x0000 0x4 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DTE_RX 0x0198 0x0460 0x0764 0x4 0x7 +#define MX6SLL_PAD_UART1_TXD__GPIO3_IO17 0x0198 0x0460 0x0000 0x5 0x0 +#define MX6SLL_PAD_UART1_TXD__UART5_DCD_B 0x0198 0x0460 0x0000 0x7 0x0 +#define MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x019C 0x0464 0x067C 0x0 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DCE_RTS 0x019C 0x0464 0x0740 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__UART1_DTE_CTS 0x019C 0x0464 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI3_SS2 0x019C 0x0464 0x0640 0x2 0x0 +#define MX6SLL_PAD_I2C1_SCL__SD3_RESET 0x019C 0x0464 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SCL__GPIO3_IO12 0x019C 0x0464 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SCL__ECSPI1_SS1 0x019C 0x0464 0x060C 0x6 0x0 +#define MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x01A0 0x0468 0x0680 0x0 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DCE_CTS 0x01A0 0x0468 0x0000 0x1 0x0 +#define MX6SLL_PAD_I2C1_SDA__UART1_DTE_RTS 0x01A0 0x0468 0x0740 0x1 0x1 +#define MX6SLL_PAD_I2C1_SDA__ECSPI3_SS3 0x01A0 0x0468 0x0644 0x2 0x0 +#define MX6SLL_PAD_I2C1_SDA__SD3_VSELECT 0x01A0 0x0468 0x0000 0x4 0x0 +#define MX6SLL_PAD_I2C1_SDA__GPIO3_IO13 0x01A0 0x0468 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C1_SDA__ECSPI1_SS2 0x01A0 0x0468 0x0610 0x6 0x0 +#define MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x01A4 0x046C 0x0684 0x0 0x3 +#define MX6SLL_PAD_I2C2_SCL__AUD4_RXFS 0x01A4 0x046C 0x0570 0x1 0x2 +#define MX6SLL_PAD_I2C2_SCL__SPDIF_IN 0x01A4 0x046C 0x0738 0x2 0x2 +#define MX6SLL_PAD_I2C2_SCL__SD3_WP 0x01A4 0x046C 0x0794 0x4 0x3 +#define MX6SLL_PAD_I2C2_SCL__GPIO3_IO14 0x01A4 0x046C 0x0000 0x5 0x0 +#define MX6SLL_PAD_I2C2_SCL__ECSPI1_RDY 0x01A4 0x046C 0x0600 0x6 0x1 +#define MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x01A8 0x0470 0x0688 0x0 0x3 +#define MX6SLL_PAD_I2C2_SDA__AUD4_RXC 0x01A8 0x0470 0x056C 0x1 0x2 +#define MX6SLL_PAD_I2C2_SDA__SPDIF_OUT 0x01A8 0x0470 0x0000 0x2 0x0 +#define MX6SLL_PAD_I2C2_SDA__SD3_CD_B 0x01A8 0x0470 0x0780 0x4 0x3 +#define MX6SLL_PAD_I2C2_SDA__GPIO3_IO15 0x01A8 0x0470 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x01AC 0x0474 0x05FC 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__AUD4_TXD 0x01AC 0x0474 0x0568 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DCE_RX 0x01AC 0x0474 0x0764 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_SCLK__UART5_DTE_TX 0x01AC 0x0474 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__EPDC_VCOM0 0x01AC 0x0474 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__SD2_RESET 0x01AC 0x0474 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x01AC 0x0474 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SCLK__USB_OTG2_OC 0x01AC 0x0474 0x0768 0x6 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x01B0 0x0478 0x0608 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__AUD4_TXC 0x01B0 0x0478 0x0574 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DCE_TX 0x01B0 0x0478 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__UART5_DTE_RX 0x01B0 0x0478 0x0764 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_MOSI__EPDC_VCOM1 0x01B0 0x0478 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__SD2_VSELECT 0x01B0 0x0478 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MOSI__GPIO4_IO09 0x01B0 0x0478 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x01B4 0x047C 0x0604 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__AUD4_TXFS 0x01B4 0x047C 0x0578 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DCE_RTS 0x01B4 0x047C 0x0760 0x2 0x2 +#define MX6SLL_PAD_ECSPI1_MISO__UART5_DTE_CTS 0x01B4 0x047C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__EPDC_BDR0 0x01B4 0x047C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__SD2_WP 0x01B4 0x047C 0x077C 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_MISO__GPIO4_IO10 0x01B4 0x047C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__ECSPI1_SS0 0x01B8 0x0480 0x0614 0x0 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__AUD4_RXD 0x01B8 0x0480 0x0564 0x1 0x1 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DCE_CTS 0x01B8 0x0480 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__UART5_DTE_RTS 0x01B8 0x0480 0x0760 0x2 0x3 +#define MX6SLL_PAD_ECSPI1_SS0__EPDC_BDR1 0x01B8 0x0480 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__SD2_CD_B 0x01B8 0x0480 0x0778 0x4 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__GPIO4_IO11 0x01B8 0x0480 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI1_SS0__USB_OTG2_PWR 0x01B8 0x0480 0x0000 0x6 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__ECSPI2_SCLK 0x01BC 0x0484 0x061C 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SPDIF_EXT_CLK 0x01BC 0x0484 0x073C 0x1 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DCE_RX 0x01BC 0x0484 0x0754 0x2 0x2 +#define MX6SLL_PAD_ECSPI2_SCLK__UART3_DTE_TX 0x01BC 0x0484 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__CSI_PIXCLK 0x01BC 0x0484 0x05F4 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SCLK__SD1_RESET 0x01BC 0x0484 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__GPIO4_IO12 0x01BC 0x0484 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SCLK__USB_OTG2_OC 0x01BC 0x0484 0x0768 0x6 0x2 +#define MX6SLL_PAD_ECSPI2_MOSI__ECSPI2_MOSI 0x01C0 0x0488 0x0624 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SDMA_EXT_EVENT1 0x01C0 0x0488 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DCE_TX 0x01C0 0x0488 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__UART3_DTE_RX 0x01C0 0x0488 0x0754 0x2 0x3 +#define MX6SLL_PAD_ECSPI2_MOSI__CSI_HSYNC 0x01C0 0x0488 0x05F0 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_MOSI__SD1_VSELECT 0x01C0 0x0488 0x0000 0x4 0x0 +#define MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x01C0 0x0488 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__ECSPI2_MISO 0x01C4 0x048C 0x0620 0x0 0x1 +#define MX6SLL_PAD_ECSPI2_MISO__SDMA_EXT_EVENT0 0x01C4 0x048C 0x0000 0x1 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DCE_RTS 0x01C4 0x048C 0x0750 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__UART3_DTE_CTS 0x01C4 0x048C 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__CSI_MCLK 0x01C4 0x048C 0x0000 0x3 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__SD1_WP 0x01C4 0x048C 0x0774 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_MISO__GPIO4_IO14 0x01C4 0x048C 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_MISO__USB_OTG1_OC 0x01C4 0x048C 0x076C 0x6 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI2_SS0 0x01C8 0x0490 0x0628 0x0 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__ECSPI1_SS3 0x01C8 0x0490 0x0618 0x1 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DCE_CTS 0x01C8 0x0490 0x0000 0x2 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__UART3_DTE_RTS 0x01C8 0x0490 0x0750 0x2 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__CSI_VSYNC 0x01C8 0x0490 0x05F8 0x3 0x1 +#define MX6SLL_PAD_ECSPI2_SS0__SD1_CD_B 0x01C8 0x0490 0x0770 0x4 0x2 +#define MX6SLL_PAD_ECSPI2_SS0__GPIO4_IO15 0x01C8 0x0490 0x0000 0x5 0x0 +#define MX6SLL_PAD_ECSPI2_SS0__USB_OTG1_PWR 0x01C8 0x0490 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD1_CLK__SD1_CLK 0x01CC 0x0494 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CLK__KEY_COL0 0x01CC 0x0494 0x06A0 0x2 0x2 +#define MX6SLL_PAD_SD1_CLK__EPDC_SDCE4 0x01CC 0x0494 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CLK__GPIO5_IO15 0x01CC 0x0494 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_CMD__SD1_CMD 0x01D0 0x0498 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_CMD__KEY_ROW0 0x01D0 0x0498 0x06C0 0x2 0x2 +#define MX6SLL_PAD_SD1_CMD__EPDC_SDCE5 0x01D0 0x0498 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_CMD__GPIO5_IO14 0x01D0 0x0498 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x01D4 0x049C 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA0__KEY_COL1 0x01D4 0x049C 0x06A4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA0__EPDC_SDCE6 0x01D4 0x049C 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA0__GPIO5_IO11 0x01D4 0x049C 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x01D8 0x04A0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA1__KEY_ROW1 0x01D8 0x04A0 0x06C4 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA1__EPDC_SDCE7 0x01D8 0x04A0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA1__GPIO5_IO08 0x01D8 0x04A0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x01DC 0x04A4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA2__KEY_COL2 0x01DC 0x04A4 0x06A8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA2__EPDC_SDCE8 0x01DC 0x04A4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA2__GPIO5_IO13 0x01DC 0x04A4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x01E0 0x04A8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA3__KEY_ROW2 0x01E0 0x04A8 0x06C8 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA3__EPDC_SDCE9 0x01E0 0x04A8 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA3__GPIO5_IO06 0x01E0 0x04A8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x01E4 0x04AC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA4__KEY_COL3 0x01E4 0x04AC 0x06AC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA4__EPDC_SDCLK_N 0x01E4 0x04AC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA4__UART4_DCE_RX 0x01E4 0x04AC 0x075C 0x4 0x6 +#define MX6SLL_PAD_SD1_DATA4__UART4_DTE_TX 0x01E4 0x04AC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA4__GPIO5_IO12 0x01E4 0x04AC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x01E8 0x04B0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA5__KEY_ROW3 0x01E8 0x04B0 0x06CC 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA5__EPDC_SDOED 0x01E8 0x04B0 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DCE_TX 0x01E8 0x04B0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA5__UART4_DTE_RX 0x01E8 0x04B0 0x075C 0x4 0x7 +#define MX6SLL_PAD_SD1_DATA5__GPIO5_IO09 0x01E8 0x04B0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x01EC 0x04B4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA6__KEY_COL4 0x01EC 0x04B4 0x06B0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA6__EPDC_SDOEZ 0x01EC 0x04B4 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD1_DATA6__UART4_DCE_RTS 0x01EC 0x04B4 0x0758 0x4 0x4 +#define MX6SLL_PAD_SD1_DATA6__UART4_DTE_CTS 0x01EC 0x04B4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA6__GPIO5_IO07 0x01EC 0x04B4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x01F0 0x04B8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD1_DATA7__KEY_ROW4 0x01F0 0x04B8 0x06D0 0x2 0x2 +#define MX6SLL_PAD_SD1_DATA7__CCM_PMIC_READY 0x01F0 0x04B8 0x05AC 0x3 0x3 +#define MX6SLL_PAD_SD1_DATA7__UART4_DCE_CTS 0x01F0 0x04B8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD1_DATA7__UART4_DTE_RTS 0x01F0 0x04B8 0x0758 0x4 0x5 +#define MX6SLL_PAD_SD1_DATA7__GPIO5_IO10 0x01F0 0x04B8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_RESET__SD2_RESET 0x01F4 0x04BC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_RESET__WDOG2_B 0x01F4 0x04BC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_RESET__SPDIF_OUT 0x01F4 0x04BC 0x0000 0x3 0x0 +#define MX6SLL_PAD_SD2_RESET__CSI_MCLK 0x01F4 0x04BC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_RESET__GPIO4_IO27 0x01F4 0x04BC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CLK__SD2_CLK 0x01F8 0x04C0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CLK__AUD4_RXFS 0x01F8 0x04C0 0x0570 0x1 0x1 +#define MX6SLL_PAD_SD2_CLK__ECSPI3_SCLK 0x01F8 0x04C0 0x0630 0x2 0x1 +#define MX6SLL_PAD_SD2_CLK__CSI_DATA00 0x01F8 0x04C0 0x05C8 0x3 0x1 +#define MX6SLL_PAD_SD2_CLK__GPIO5_IO05 0x01F8 0x04C0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_CMD__SD2_CMD 0x01FC 0x04C4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_CMD__AUD4_RXC 0x01FC 0x04C4 0x056C 0x1 0x1 +#define MX6SLL_PAD_SD2_CMD__ECSPI3_SS0 0x01FC 0x04C4 0x0648 0x2 0x1 +#define MX6SLL_PAD_SD2_CMD__CSI_DATA01 0x01FC 0x04C4 0x05CC 0x3 0x1 +#define MX6SLL_PAD_SD2_CMD__EPIT1_OUT 0x01FC 0x04C4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_CMD__GPIO5_IO04 0x01FC 0x04C4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA0__SD2_DATA0 0x0200 0x04C8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA0__AUD4_RXD 0x0200 0x04C8 0x0564 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA0__ECSPI3_MOSI 0x0200 0x04C8 0x063C 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA0__CSI_DATA02 0x0200 0x04C8 0x05D0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA0__UART5_DCE_RTS 0x0200 0x04C8 0x0760 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA0__UART5_DTE_CTS 0x0200 0x04C8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA0__GPIO5_IO01 0x0200 0x04C8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA1__SD2_DATA1 0x0204 0x04CC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA1__AUD4_TXC 0x0204 0x04CC 0x0574 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA1__ECSPI3_MISO 0x0204 0x04CC 0x0638 0x2 0x1 +#define MX6SLL_PAD_SD2_DATA1__CSI_DATA03 0x0204 0x04CC 0x05D4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA1__UART5_DCE_CTS 0x0204 0x04CC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA1__UART5_DTE_RTS 0x0204 0x04CC 0x0760 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA1__GPIO4_IO30 0x0204 0x04CC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA2__SD2_DATA2 0x0208 0x04D0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA2__AUD4_TXFS 0x0208 0x04D0 0x0578 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA2__CSI_DATA04 0x0208 0x04D0 0x05D8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA2__UART5_DCE_RX 0x0208 0x04D0 0x0764 0x4 0x4 +#define MX6SLL_PAD_SD2_DATA2__UART5_DTE_TX 0x0208 0x04D0 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA2__GPIO5_IO03 0x0208 0x04D0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA3__SD2_DATA3 0x020C 0x04D4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA3__AUD4_TXD 0x020C 0x04D4 0x0568 0x1 0x2 +#define MX6SLL_PAD_SD2_DATA3__CSI_DATA05 0x020C 0x04D4 0x05DC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA3__UART5_DCE_TX 0x020C 0x04D4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA3__UART5_DTE_RX 0x020C 0x04D4 0x0764 0x4 0x5 +#define MX6SLL_PAD_SD2_DATA3__GPIO4_IO28 0x020C 0x04D4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD2_DATA4 0x0210 0x04D8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA4__SD3_DATA4 0x0210 0x04D8 0x0784 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA4__UART2_DCE_RX 0x0210 0x04D8 0x074C 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA4__UART2_DTE_TX 0x0210 0x04D8 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA4__CSI_DATA06 0x0210 0x04D8 0x05E0 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA4__SPDIF_OUT 0x0210 0x04D8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD2_DATA4__GPIO5_IO02 0x0210 0x04D8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD2_DATA5 0x0214 0x04DC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA5__SD3_DATA5 0x0214 0x04DC 0x0788 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA5__UART2_DCE_TX 0x0214 0x04DC 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA5__UART2_DTE_RX 0x0214 0x04DC 0x074C 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA5__CSI_DATA07 0x0214 0x04DC 0x05E4 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA5__SPDIF_IN 0x0214 0x04DC 0x0738 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA5__GPIO4_IO31 0x0214 0x04DC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD2_DATA6 0x0218 0x04E0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA6__SD3_DATA6 0x0218 0x04E0 0x078C 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA6__UART2_DCE_RTS 0x0218 0x04E0 0x0748 0x2 0x2 +#define MX6SLL_PAD_SD2_DATA6__UART2_DTE_CTS 0x0218 0x04E0 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA6__CSI_DATA08 0x0218 0x04E0 0x05E8 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA6__SD2_WP 0x0218 0x04E0 0x077C 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x0218 0x04E0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD2_DATA7 0x021C 0x04E4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD2_DATA7__SD3_DATA7 0x021C 0x04E4 0x0790 0x1 0x1 +#define MX6SLL_PAD_SD2_DATA7__UART2_DCE_CTS 0x021C 0x04E4 0x0000 0x2 0x0 +#define MX6SLL_PAD_SD2_DATA7__UART2_DTE_RTS 0x021C 0x04E4 0x0748 0x2 0x3 +#define MX6SLL_PAD_SD2_DATA7__CSI_DATA09 0x021C 0x04E4 0x05EC 0x3 0x1 +#define MX6SLL_PAD_SD2_DATA7__SD2_CD_B 0x021C 0x04E4 0x0778 0x4 0x1 +#define MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x021C 0x04E4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__SD3_CLK 0x0220 0x04E8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CLK__AUD5_RXFS 0x0220 0x04E8 0x0588 0x1 0x0 +#define MX6SLL_PAD_SD3_CLK__KEY_COL5 0x0220 0x04E8 0x0694 0x2 0x0 +#define MX6SLL_PAD_SD3_CLK__CSI_DATA10 0x0220 0x04E8 0x05B0 0x3 0x0 +#define MX6SLL_PAD_SD3_CLK__WDOG1_RESET_B_DEB 0x0220 0x04E8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x0220 0x04E8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CLK__USB_OTG1_PWR 0x0220 0x04E8 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_CMD__SD3_CMD 0x0224 0x04EC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_CMD__AUD5_RXC 0x0224 0x04EC 0x0584 0x1 0x0 +#define MX6SLL_PAD_SD3_CMD__KEY_ROW5 0x0224 0x04EC 0x06B4 0x2 0x0 +#define MX6SLL_PAD_SD3_CMD__CSI_DATA11 0x0224 0x04EC 0x05B4 0x3 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_ID 0x0224 0x04EC 0x0560 0x4 0x1 +#define MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x0224 0x04EC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_CMD__USB_OTG2_PWR 0x0224 0x04EC 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x0228 0x04F0 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA0__AUD5_RXD 0x0228 0x04F0 0x057C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA0__KEY_COL6 0x0228 0x04F0 0x0698 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA0__CSI_DATA12 0x0228 0x04F0 0x05B8 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA0__USB_OTG1_ID 0x0228 0x04F0 0x055C 0x4 0x1 +#define MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x0228 0x04F0 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x022C 0x04F4 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA1__AUD5_TXC 0x022C 0x04F4 0x058C 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA1__KEY_ROW6 0x022C 0x04F4 0x06B8 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA1__CSI_DATA13 0x022C 0x04F4 0x05BC 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA1__SD1_VSELECT 0x022C 0x04F4 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x022C 0x04F4 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA1__JTAG_DE_B 0x022C 0x04F4 0x0000 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x0230 0x04F8 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA2__AUD5_TXFS 0x0230 0x04F8 0x0590 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA2__KEY_COL7 0x0230 0x04F8 0x069C 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA2__CSI_DATA14 0x0230 0x04F8 0x05C0 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA2__EPIT1_OUT 0x0230 0x04F8 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x0230 0x04F8 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA2__USB_OTG2_OC 0x0230 0x04F8 0x0768 0x6 0x0 +#define MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x0234 0x04FC 0x0000 0x0 0x0 +#define MX6SLL_PAD_SD3_DATA3__AUD5_TXD 0x0234 0x04FC 0x0580 0x1 0x0 +#define MX6SLL_PAD_SD3_DATA3__KEY_ROW7 0x0234 0x04FC 0x06BC 0x2 0x0 +#define MX6SLL_PAD_SD3_DATA3__CSI_DATA15 0x0234 0x04FC 0x05C4 0x3 0x0 +#define MX6SLL_PAD_SD3_DATA3__EPIT2_OUT 0x0234 0x04FC 0x0000 0x4 0x0 +#define MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x0234 0x04FC 0x0000 0x5 0x0 +#define MX6SLL_PAD_SD3_DATA3__USB_OTG1_OC 0x0234 0x04FC 0x076C 0x6 0x0 +#define MX6SLL_PAD_GPIO4_IO20__SD1_STROBE 0x0238 0x0500 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO20__AUD6_RXFS 0x0238 0x0500 0x05A0 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO20__ECSPI4_SS0 0x0238 0x0500 0x065C 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPT_CAPTURE1 0x0238 0x0500 0x0670 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x0238 0x0500 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO21__SD2_STROBE 0x023C 0x0504 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO21__AUD6_RXC 0x023C 0x0504 0x059C 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO21__ECSPI4_SCLK 0x023C 0x0504 0x0650 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPT_CAPTURE2 0x023C 0x0504 0x0674 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x023C 0x0504 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO19__SD3_STROBE 0x0240 0x0508 0x0000 0x0 0x0 +#define MX6SLL_PAD_GPIO4_IO19__AUD6_RXD 0x0240 0x0508 0x0594 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO19__ECSPI4_MOSI 0x0240 0x0508 0x0658 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPT_COMPARE1 0x0240 0x0508 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x0240 0x0508 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO25__AUD6_TXC 0x0244 0x050C 0x05A4 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO25__ECSPI4_MISO 0x0244 0x050C 0x0654 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPT_COMPARE2 0x0244 0x050C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x0244 0x050C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO18__AUD6_TXFS 0x0248 0x0510 0x05A8 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO18__ECSPI4_SS1 0x0248 0x0510 0x0660 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPT_COMPARE3 0x0248 0x0510 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO18__GPIO4_IO18 0x0248 0x0510 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO24__AUD6_TXD 0x024C 0x0514 0x0598 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO24__ECSPI4_SS2 0x024C 0x0514 0x0664 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPT_CLKIN 0x024C 0x0514 0x0678 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO24__GPIO4_IO24 0x024C 0x0514 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO23__AUDIO_CLK_OUT 0x0250 0x0518 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD1_RESET 0x0250 0x0518 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO23__SD3_RESET 0x0250 0x0518 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x0250 0x0518 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO17__USB_OTG1_ID 0x0254 0x051C 0x055C 0x2 0x2 +#define MX6SLL_PAD_GPIO4_IO17__SD1_VSELECT 0x0254 0x051C 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO17__SD3_VSELECT 0x0254 0x051C 0x0000 0x4 0x0 +#define MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x0254 0x051C 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SPDIF_IN 0x0258 0x0520 0x0738 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD1_WP 0x0258 0x0520 0x0774 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO22__SD3_WP 0x0258 0x0520 0x0794 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO22__GPIO4_IO22 0x0258 0x0520 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SPDIF_OUT 0x025C 0x0524 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD1_CD_B 0x025C 0x0524 0x0770 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO16__SD3_CD_B 0x025C 0x0524 0x0780 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO16__GPIO4_IO16 0x025C 0x0524 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__WDOG1_B 0x0260 0x0528 0x0000 0x2 0x0 +#define MX6SLL_PAD_GPIO4_IO26__PWM4_OUT 0x0260 0x0528 0x0000 0x3 0x0 +#define MX6SLL_PAD_GPIO4_IO26__CCM_PMIC_READY 0x0260 0x0528 0x05AC 0x4 0x1 +#define MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x0260 0x0528 0x0000 0x5 0x0 +#define MX6SLL_PAD_GPIO4_IO26__SPDIF_EXT_CLK 0x0260 0x0528 0x073C 0x6 0x0 + +#endif /* __DTS_IMX6SLL_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi new file mode 100644 index 000000000000..000e6136a9d6 --- /dev/null +++ b/arch/arm/boot/dts/imx6sll.dtsi @@ -0,0 +1,780 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP. + * + */ + +#include <dt-bindings/clock/imx6sll-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6sll-pinfunc.h" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi3 = &ecspi3; + spi4 = &ecspi4; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1275000 + 792000 1175000 + 396000 1075000 + 198000 975000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC-PU uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6SLL_CLK_ARM>, + <&clks IMX6SLL_CLK_PLL2_PFD2>, + <&clks IMX6SLL_CLK_STEP>, + <&clks IMX6SLL_CLK_PLL1_SW>, + <&clks IMX6SLL_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + }; + }; + + intc: interrupt-controller@a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + interrupt-parent = <&intc>; + }; + + ckil: clock-ckil { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock-osc-24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock-ipp-di0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock-ipp-di1 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + + tempmon: temperature-sensor { + compatible = "fsl,imx6sll-tempmon", "fsl,imx6sx-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gpc>; + fsl,tempmon = <&anatop>; + nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>; + nvmem-cell-names = "calib", "temp_grade"; + clocks = <&clks IMX6SLL_CLK_PLL3_USB_OTG>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gpc>; + ranges; + + ocram: sram@900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + }; + + L2: l2-cache@a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + aips1: aips-bus@2000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba: spba-bus@2000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@2004000 { + compatible = "fsl,imx6sl-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_SPDIF_GCLK>, + <&clks IMX6SLL_CLK_OSC>, + <&clks IMX6SLL_CLK_SPDIF>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_IPG>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: spi@2008000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI1>, + <&clks IMX6SLL_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: spi@200c000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI2>, + <&clks IMX6SLL_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: spi@2010000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI3>, + <&clks IMX6SLL_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: spi@2014000 { + compatible = "fsl,imx6ul-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_ECSPI4>, + <&clks IMX6SLL_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart4: serial@2018000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02018000 0x4000>; + interrupts =<GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART4_IPG>, + <&clks IMX6SLL_CLK_UART4_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@2020000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART1_IPG>, + <&clks IMX6SLL_CLK_UART1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@2024000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART2_IPG>, + <&clks IMX6SLL_CLK_UART2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ssi1: ssi-controller@2028000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 37 22 0>, <&sdma 38 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI1_IPG>, + <&clks IMX6SLL_CLK_SSI1>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi2: ssi-controller@202c000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 41 22 0>, <&sdma 42 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI2_IPG>, + <&clks IMX6SLL_CLK_SSI2>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + ssi3: ssi-controller@2030000 { + compatible = "fsl,imx6sl-ssi", "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 45 22 0>, <&sdma 46 22 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + clocks = <&clks IMX6SLL_CLK_SSI3_IPG>, + <&clks IMX6SLL_CLK_SSI3>; + clock-names = "ipg", "baud"; + status = "disabled"; + }; + + uart3: serial@2034000 { + compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x02034000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-name = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART3_IPG>, + <&clks IMX6SLL_CLK_UART3_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + + pwm1: pwm@2080000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM1>, + <&clks IMX6SLL_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@2084000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM2>, + <&clks IMX6SLL_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@2088000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM3>, + <&clks IMX6SLL_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@208c000 { + compatible = "fsl,imx6sll-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_PWM4>, + <&clks IMX6SLL_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + gpt1: timer@2098000 { + compatible = "fsl,imx6sl-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_GPT_BUS>, + <&clks IMX6SLL_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@209c000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@20a0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@20a4000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@20a8000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@20ac000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@20b0000 { + compatible = "fsl,imx6sll-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: keypad@20b8000 { + compatible = "fsl,imx6sll-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_KPP>; + status = "disabled"; + }; + + wdog1: watchdog@20bc000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG1>; + }; + + wdog2: watchdog@20c0000 { + compatible = "fsl,imx6sll-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_WDOG2>; + status = "disabled"; + }; + + clks: clock-controller@20c4000 { + compatible = "fsl,imx6sll-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + + assigned-clocks = <&clks IMX6SLL_CLK_PERCLK_SEL>; + assigned-clock-parents = <&clks IMX6SLL_CLK_OSC>; + }; + + anatop: anatop@20c8000 { + compatible = "fsl,imx6sll-anatop", + "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x4000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p0: regulator-3p0@20c8120 { + compatible = "fsl,anatop-regulator"; + reg = <0x20c8120>; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2625000>; + regulator-max-microvolt = <3400000>; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + anatop-enable-bit = <0>; + }; + }; + + usbphy1: usb-phy@20c9000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY1>; + phy-3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usb-phy@20ca000 { + compatible = "fsl,imx6sll-usbphy", "fsl,imx6ul-usbphy", + "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBPHY2>; + phy-reg_3p0-supply = <®_3p0>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@20cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_rtc: snvs-rtc-lp { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + regmap = <&snvs>; + offset = <0x34>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x61>; + }; + + snvs_pwrkey: snvs-powerkey { + compatible = "fsl,sec-v4.0-pwrkey"; + regmap = <&snvs>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + }; + + src: reset-controller@20d8000 { + compatible = "fsl,imx6sll-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: interrupt-controller@20dc000 { + compatible = "fsl,imx6sll-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + fsl,mf-mix-wakeup-irq = <0x7c00000 0x7d00 0x0 0x1400640>; + }; + + iomuxc: pinctrl@20e0000 { + compatible = "fsl,imx6sll-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@20e4000 { + compatible = "fsl,imx6sll-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + csi: csi@20e8000 { + compatible = "fsl,imx6sll-csi", "fsl,imx6s-csi"; + reg = <0x020e8000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DUMMY>, + <&clks IMX6SLL_CLK_CSI>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "disp-axi", "csi_mclk", "disp_dcic"; + status = "disabled"; + }; + + sdma: dma-controller@20ec000 { + compatible = "fsl,imx6sll-sdma", "fsl,imx35-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_SDMA>, + <&clks IMX6SLL_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + iram = <&ocram>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + + lcdif: lcd-controller@20f8000 { + compatible = "fsl,imx6sll-lcdif", "fsl,imx28-lcdif"; + reg = <0x020f8000 0x4000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_LCDIF_PIX>, + <&clks IMX6SLL_CLK_LCDIF_APB>, + <&clks IMX6SLL_CLK_DUMMY>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + dcp: dcp@20fc000 { + compatible = "fsl,imx28-dcp"; + reg = <0x020fc000 0x4000>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_DCP>; + clock-names = "dcp"; + }; + }; + + aips2: aips-bus@2100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@2184000 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbotg2: usb@2184200 { + compatible = "fsl,imx6sll-usb", "fsl,imx6ul-usb", + "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + status = "disabled"; + }; + + usbmisc: usbmisc@2184800 { + #index-cells = <1>; + compatible = "fsl,imx6sll-usbmisc", "fsl,imx6ul-usbmisc", + "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + }; + + usdhc1: mmc@2190000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>, + <&clks IMX6SLL_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc2: mmc@2194000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>, + <&clks IMX6SLL_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + usdhc3: mmc@2198000 { + compatible = "fsl,imx6sll-usdhc", "fsl,imx6sx-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>, + <&clks IMX6SLL_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + fsl,tuning-step = <2>; + fsl,tuning-start-tap = <20>; + status = "disabled"; + }; + + i2c1: i2c@21a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@21a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@21a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SLL_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: memory-controller@21b0000 { + compatible = "fsl,imx6sll-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + ocotp: ocotp-ctrl@21bc000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,imx6sll-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SLL_CLK_OCOTP>; + + tempmon_calib: calib@38 { + reg = <0x38 4>; + }; + + tempmon_temp_grade: temp-grade@20 { + reg = <0x20 4>; + }; + }; + + audmux: audmux@21d8000 { + compatible = "fsl,imx6sll-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + uart5: serial@21f4000 { + compatible = "fsl,imx6sll-uart", "fsl,imx6q-uart", + "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts =<GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SLL_CLK_UART5_IPG>, + <&clks IMX6SLL_CLK_UART5_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts index 59e52f504922..adb5cc7d8ce2 100644 --- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts +++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts @@ -1,42 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright (C) 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -47,11 +11,6 @@ model = "Boundary Devices i.MX6 SoloX Nitrogen6sx Board"; compatible = "boundary,imx6sx-nitrogen6sx", "fsl,imx6sx"; - aliases { - fb-lcd = &lcdif1; - t-lcd = &t_lcd; - }; - memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -261,38 +220,6 @@ status = "okay"; }; -&lcdif1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif1>; - lcd-supply = <®_3p3v>; - display = <&display0>; - status = "okay"; - - display0: display0 { - bits-per-pixel = <16>; - bus-width = <24>; - - display-timings { - native-mode = <&t_lcd>; - t_lcd: t_lcd_default { - clock-frequency = <74160000>; - hactive = <1280>; - vactive = <720>; - hback-porch = <220>; - hfront-porch = <110>; - vback-porch = <20>; - vfront-porch = <5>; - hsync-len = <40>; - vsync-len = <5>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; - }; - }; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; @@ -524,40 +451,6 @@ >; }; - pinctrl_lcdif1: lcdif1grp { - fsl,pins = < - MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x4001b0b0 - MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x4001b0b0 - MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x4001b0b0 - MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x4001b0b0 - MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x4001b0b0 - MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x4001b0b0 - MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x4001b0b0 - MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x4001b0b0 - MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x4001b0b0 - MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x4001b0b0 - MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x4001b0b0 - MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x4001b0b0 - MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x4001b0b0 - MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x4001b0b0 - MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x4001b0b0 - MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x4001b0b0 - MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x4001b0b0 - MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x4001b0b0 - MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x4001b0b0 - MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x4001b0b0 - MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x4001b0b0 - MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x4001b0b0 - MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x4001b0b0 - MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x4001b0b0 - MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x4001b0b0 - MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x4001b0b0 - MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x4001b0b0 - MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x4001b0b0 - >; - }; - pinctrl_pcie: pciegrp { fsl,pins = < MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0xb0b0 diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index e3533e74ccc8..9cc6ff206aea 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -63,6 +63,7 @@ sw4_reg: sw4 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; swbst_reg: swbst { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index 4e4a55aad5c9..844caa39364f 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -79,6 +79,7 @@ 198000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; clocks = <&clks IMX6SX_CLK_ARM>, <&clks IMX6SX_CLK_PLL2_PFD2>, <&clks IMX6SX_CLK_STEP>, @@ -165,6 +166,12 @@ interrupt-parent = <&gpc>; ranges; + ocram_s: sram@8f8000 { + compatible = "mmio-sram"; + reg = <0x008f8000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCRAM_S>; + }; + ocram: sram@900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; @@ -591,8 +598,8 @@ regulator-1p1 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd1p1"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1375000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1200000>; regulator-always-on; anatop-reg-offset = <0x110>; anatop-vol-bit-shift = <8>; @@ -621,8 +628,8 @@ regulator-2p5 { compatible = "fsl,anatop-regulator"; regulator-name = "vdd2p5"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2875000>; + regulator-min-microvolt = <2250000>; + regulator-max-microvolt = <2750000>; regulator-always-on; anatop-reg-offset = <0x130>; anatop-vol-bit-shift = <8>; @@ -814,7 +821,6 @@ crypto: caam@2100000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <4>; #address-cells = <1>; #size-cells = <1>; reg = <0x2100000 0x10000>; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts new file mode 100644 index 000000000000..3792679c0c90 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsbcexpress.dts @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore6UL SBC Express board device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "imx6ul.dtsi" +#include "imx6ul-ccimx6ulsom.dtsi" + +/ { + model = "Digi International ConnectCore 6UL SBC Express."; + compatible = "digi,ccimx6ulsbcexpress", "digi,ccimx6ulsom", + "fsl,imx6ul"; +}; + +&adc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_adc1>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <&ext_3v3>; + status = "okay"; +}; + +&ecspi3 { + cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3_master>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + smsc,disable-energy-detect; + reg = <0>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + broken-cd; /* no carrier detect line (use polling) */ + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + pinctrl_adc1: adc1grp { + fsl,pins = < + /* GPIO1_4/ADC1_IN4 (pin 7 of the expansion header) */ + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + + pinctrl_ecspi3_master: ecspi3grp1 { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x10b0 /* Chip Select */ + >; + }; + + pinctrl_ecspi3_slave: ecspi3grp2 { + fsl,pins = < + MX6UL_PAD_UART2_RX_DATA__ECSPI3_SCLK 0x10b0 + MX6UL_PAD_UART2_CTS_B__ECSPI3_MOSI 0x10b0 + MX6UL_PAD_UART2_RTS_B__ECSPI3_MISO 0x10b0 + MX6UL_PAD_UART2_TX_DATA__ECSPI3_SS0 0x10b0 /* Chip Select */ + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0 + MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0 + MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0 + MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0 + MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0 + MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0 + MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x40017051 + >; + }; + + pinctrl_flexcan1: flexcan1grp{ + fsl,pins = < + MX6UL_PAD_LCD_DATA08__FLEXCAN1_TX 0x1b020 + MX6UL_PAD_LCD_DATA09__FLEXCAN1_RX 0x1b020 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0 + MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x10b0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b1 + MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x17059 + MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x10071 + MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17059 + MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17059 + MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17059 + MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17059 + >; + }; + + /* General purpose pinctrl */ + pinctrl_hog: hoggrp { + fsl,pins = < + /* GPIOs BANK 3 */ + MX6UL_PAD_LCD_RESET__GPIO3_IO04 0xf030 + >; + }; +}; diff --git a/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi new file mode 100644 index 000000000000..c71a84da1af0 --- /dev/null +++ b/arch/arm/boot/dts/imx6ul-ccimx6ulsom.dtsi @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Digi International's ConnectCore 6UL System-On-Module device tree source + * + * Copyright 2018 Digi International, Inc. + * + */ + +/ { + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x4000000>; + linux,cma-default; + }; + }; +}; + +&adc1 { + vref-supply = <&vdda_adc_3v3>; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pfuze3000: pmic@8 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + int_3v3: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <6250>; + regulator-boot-on; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_arm_soc_in: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-ramp-delay = <6250>; + regulator-boot-on; + regulator-always-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <925000>; + }; + }; + + ext_3v3: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <6250>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr3: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1300000>; + }; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + vdd_snvs_3v3: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vrefddr: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vdda_adc_3v3: vldo1 { + compatible = "regulator-fixed"; + regulator-name = "vref-adc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + ldo2_ext: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vdda_wlan: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_high_in: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_int: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4_ext: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vcoin_chg: vcoin { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&iomuxc { + pinctrl_gpmi_nand: gpmigrp { + fsl,pins = < + MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1 + MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1 + MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1 + MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1 + MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1 + MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1 + MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1 + MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1 + MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1 + MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1 + MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1 + MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1 + MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1 + MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1 + MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0 + MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0 + >; + }; +}; + +®_arm { + vin-supply = <&vdd_arm_soc_in>; + regulator-allow-bypass; +}; + +®_soc { + vin-supply = <&vdd_arm_soc_in>; + regulator-allow-bypass; +}; diff --git a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts index 47682b8c023c..0c09420f9951 100644 --- a/arch/arm/boot/dts/imx6ul-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx6ul-pico-hobbit.dts @@ -51,8 +51,9 @@ model = "Technexion Pico i.MX6UL Board"; compatible = "technexion,imx6ul-pico-hobbit", "fsl,imx6ul"; + /* Will be filled by the bootloader */ memory@80000000 { - reg = <0x80000000 0x10000000>; + reg = <0x80000000 0>; }; chosen { diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index e27bd919e28b..6dc0b569acdf 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -62,6 +62,7 @@ device_type = "cpu"; reg = <0>; clock-latency = <61036>; /* two CLK32 periods */ + #cooling-cells = <2>; operating-points = < /* kHz uV */ 696000 1275000 diff --git a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi index 3dffbcd50bf6..183193e8580d 100644 --- a/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi +++ b/arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi @@ -20,20 +20,6 @@ &cpu0 { clock-frequency = <792000000>; - operating-points = < - /* kHz uV */ - 792000 1225000 - 528000 1175000 - 396000 1025000 - 198000 950000 - >; - fsl,soc-operating-points = < - /* KHz uV */ - 792000 1175000 - 528000 1175000 - 396000 1175000 - 198000 1175000 - >; }; &iomuxc { diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi index ebc25c98e5e1..cd1776a7015a 100644 --- a/arch/arm/boot/dts/imx6ull.dtsi +++ b/arch/arm/boot/dts/imx6ull.dtsi @@ -1,43 +1,6 @@ -/* - * Copyright 2016 Freescale Semiconductor, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Copyright 2016 Freescale Semiconductor, Inc. #include "imx6ul.dtsi" #include "imx6ull-pinfunc.h" @@ -48,6 +11,25 @@ /* Delete CAAM node in AIPS-2 (i.MX6UL specific) */ /delete-node/ &crypto; +&cpu0 { + operating-points = < + /* kHz uV */ + 900000 1275000 + 792000 1225000 + 528000 1175000 + 396000 1025000 + 198000 950000 + >; + fsl,soc-operating-points = < + /* KHz uV */ + 900000 1175000 + 792000 1175000 + 528000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + / { soc { aips3: aips-bus@2200000 { diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts index 70c53e50b2fc..d8aac4a2d02a 100644 --- a/arch/arm/boot/dts/imx7d-nitrogen7.dts +++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 /* * Copyright 2016 Boundary Devices, Inc. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; @@ -48,11 +11,6 @@ model = "Boundary Devices i.MX7 Nitrogen7 Board"; compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; - aliases { - fb-lcd = &lcdif; - t-lcd = &t_lcd; - }; - memory@80000000 { reg = <0x80000000 0x40000000>; }; @@ -65,7 +23,7 @@ default-on; }; - backlight-j20 { + backlight_lcd: backlight-j20 { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000 0>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -73,6 +31,17 @@ status = "okay"; }; + panel-lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + panel_in: endpoint { + remote-endpoint = <&lcdif_out>; + }; + }; + }; + reg_usb_otg1_vbus: regulator-usb-otg1-vbus { compatible = "regulator-fixed"; regulator-name = "usb_otg1_vbus"; @@ -317,35 +286,11 @@ }; &lcdif { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcdif_dat - &pinctrl_lcdif_ctrl>; - lcd-supply = <®_vref_3v3>; - display = <&display0>; status = "okay"; - display0: lcd-display { - bits-per-pixel = <16>; - bus-width = <18>; - - display-timings { - native-mode = <&t_lcd>; - t_lcd: t_lcd_default { - /* default to Okaya display */ - clock-frequency = <30000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <48>; - vback-porch = <29>; - vfront-porch = <13>; - vsync-len = <3>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <0>; - }; + port { + lcdif_out: endpoint { + remote-endpoint = <&panel_in>; }; }; }; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 940849163104..c9b3c60b0eb2 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -10,6 +10,10 @@ model = "Freescale i.MX7 SabreSD Board"; compatible = "fsl,imx7d-sdb", "fsl,imx7d"; + chosen { + stdout-path = &uart1; + }; + memory@80000000 { reg = <0x80000000 0x80000000>; }; @@ -71,14 +75,6 @@ enable-active-high; }; - reg_can2_3v3: regulator-can2-3v3 { - compatible = "regulator-fixed"; - regulator-name = "can2-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; - }; - reg_vref_1v8: regulator-vref-1v8 { compatible = "regulator-fixed"; regulator-name = "vref-1v8"; @@ -116,10 +112,17 @@ gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; + }; + panel { compatible = "innolux,at043tn24"; - pinctrl-0 = <&pinctrl_backlight>; - enable-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + backlight = <&backlight>; power-supply = <®_lcd_3v3>; port { @@ -712,6 +715,12 @@ }; }; +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + &iomuxc_lpsr { pinctrl_wdog: wdoggrp { fsl,pins = < @@ -719,9 +728,9 @@ >; }; - pinctrl_backlight: backlightgrp { + pinctrl_pwm1: pwm1grp { fsl,pins = < - MX7D_PAD_LPSR_GPIO1_IO01__GPIO1_IO1 0x110b0 + MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x30 >; }; }; diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 8d3d123d0a5c..7cbc2ffa4b3a 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -11,6 +11,7 @@ cpu0: cpu@0 { clock-frequency = <996000000>; operating-points-v2 = <&cpu0_opp_table>; + #cooling-cells = <2>; }; cpu1: cpu@1 { diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 9ced589bfa96..a052198f6e96 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -842,7 +842,6 @@ crypto: caam@30900000 { compatible = "fsl,sec-v4.0"; - fsl,sec-era = <8>; #address-cells = <1>; #size-cells = <1>; reg = <0x30900000 0x40000>; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index c55d479971cc..f18490548c78 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -84,6 +84,7 @@ device_type = "cpu"; reg = <0xf01>; clocks = <&clockgen 1 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/vf610-zii-cfu1.dts b/arch/arm/boot/dts/vf610-zii-cfu1.dts new file mode 100644 index 000000000000..37777cf22e67 --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-cfu1.dts @@ -0,0 +1,305 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Copyright (C) 2018 Zodiac Inflight Innovations + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 CFU1 Board"; + compatible = "zii,vf610cfu1", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + + led-fail { + label = "zii:red:fail"; + gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; + default-state = "off"; + max-brightness = <1>; + }; + + led-status { + label = "zii:green:status"; + gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-a { + label = "zii:green:debug_a"; + gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + + led-debug-b { + label = "zii:green:debug_b"; + gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator-vcc-3v3-mcu { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + status = "okay"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6085"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_switch>; + reg = <0>; + eeprom-length = <512>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "eth_cu_1000_1"; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_2"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_3"; + }; + + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + pca9554@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + label = "nvm"; + }; + + at24c04@54 { + compatible = "atmel,24c04"; + reg = <0x54>; + label = "nameplate"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30fe + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + VF610_PAD_PTE3__GPIO_108 0x31c2 + VF610_PAD_PTE4__GPIO_109 0x31c2 + VF610_PAD_PTE5__GPIO_110 0x31c2 + VF610_PAD_PTE6__GPIO_111 0x31c2 + >; + }; + + pinctrl_switch: switch-grp { + fsl,pins = < + VF610_PAD_PTB28__GPIO_98 0x3061 + VF610_PAD_PTE2__GPIO_107 0x1042 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; +}; diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts new file mode 100644 index 000000000000..fe357668865b --- /dev/null +++ b/arch/arm/boot/dts/vf610-zii-ssmb-spu3.dts @@ -0,0 +1,341 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/* + * Device tree file for ZII's SSMB SPU3 board + * + * SSMB - SPU3 Switch Management Board + * SPU - Seat Power Unit + * + * Copyright (C) 2015, 2016 Zodiac Inflight Innovations + * + * Based on an original 'vf610-twr.dts' which is Copyright 2015, + * Freescale Semiconductor, Inc. + */ + +/dts-v1/; +#include "vf610.dtsi" + +/ { + model = "ZII VF610 SSMB SPU3 Board"; + compatible = "zii,vf610spu3", "zii,vf610dev", "fsl,vf610"; + + chosen { + stdout-path = &uart0; + }; + + memory@80000000 { + reg = <0x80000000 0x20000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pinctrl_leds_debug>; + pinctrl-names = "default"; + + led-debug { + label = "zii:green:debug1"; + gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + max-brightness = <1>; + }; + }; + + reg_vcc_3v3_mcu: regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_mcu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&adc0 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&adc1 { + vref-supply = <®_vcc_3v3_mcu>; + status = "okay"; +}; + +&dspi1 { + bus-num = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_dspi1>; + /* + * Some SPU3s come with SPI-NOR chip DNPed, so we leave this + * node disabled by default and rely on bootloader to enable + * it when appropriate. + */ + status = "disabled"; + + m25p128@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p128", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partition@0 { + label = "m25p128-0"; + reg = <0x0 0x01000000>; + }; + }; +}; + +&edma0 { + status = "okay"; +}; + +&edma1 { + status = "okay"; +}; + +&esdhc0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc0>; + bus-width = <8>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + fixed-link { + speed = <100>; + full-duplex; + }; + + mdio1: mdio { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + switch0: switch0@0 { + compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; + reg = <0>; + eeprom-length = <65536>; + reset-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio3>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "cpu"; + ethernet = <&fec1>; + + fixed-link { + speed = <100>; + full-duplex; + }; + }; + + port@1 { + reg = <1>; + label = "eth_cu_1000_1"; + }; + + port@2 { + reg = <2>; + label = "eth_cu_1000_2"; + }; + + port@3 { + reg = <3>; + label = "eth_cu_1000_3"; + }; + + port@4 { + reg = <4>; + label = "eth_cu_1000_4"; + }; + + port@5 { + reg = <5>; + label = "eth_cu_1000_5"; + }; + + port@6 { + reg = <6>; + label = "eth_cu_1000_6"; + }; + }; + }; + }; +}; + +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; + status = "okay"; + + gpio6: pca9505@22 { + compatible = "nxp,pca9554"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + lm75@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24c04@50 { + compatible = "atmel,24c04"; + reg = <0x50>; + label = "nameplate"; + }; + + at24c04@52 { + compatible = "atmel,24c04"; + reg = <0x52>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; + + rave-sp { + compatible = "zii,rave-sp-rdu2"; + current-speed = <1000000>; + #address-cells = <1>; + #size-cells = <1>; + + watchdog { + compatible = "zii,rave-sp-watchdog"; + }; + + eeprom@a3 { + compatible = "zii,rave-sp-eeprom"; + reg = <0xa3 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + zii,eeprom-name = "main-eeprom"; + }; + }; +}; + +&iomuxc { + pinctrl_dspi1: dspi1grp { + fsl,pins = < + VF610_PAD_PTD5__DSPI1_CS0 0x1182 + VF610_PAD_PTD4__DSPI1_CS1 0x1182 + VF610_PAD_PTC6__DSPI1_SIN 0x1181 + VF610_PAD_PTC7__DSPI1_SOUT 0x1182 + VF610_PAD_PTC8__DSPI1_SCK 0x1182 + >; + }; + + pinctrl_esdhc0: esdhc0grp { + fsl,pins = < + VF610_PAD_PTC0__ESDHC0_CLK 0x31ef + VF610_PAD_PTC1__ESDHC0_CMD 0x31ef + VF610_PAD_PTC2__ESDHC0_DAT0 0x31ef + VF610_PAD_PTC3__ESDHC0_DAT1 0x31ef + VF610_PAD_PTC4__ESDHC0_DAT2 0x31ef + VF610_PAD_PTC5__ESDHC0_DAT3 0x31ef + VF610_PAD_PTD23__ESDHC0_DAT4 0x31ef + VF610_PAD_PTD22__ESDHC0_DAT5 0x31ef + VF610_PAD_PTD21__ESDHC0_DAT6 0x31ef + VF610_PAD_PTD20__ESDHC0_DAT7 0x31ef + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTA6__RMII_CLKIN 0x30d1 + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTE2__GPIO_107 0x31c2 + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + VF610_PAD_PTB16__I2C1_SCL 0x37ff + VF610_PAD_PTB17__I2C1_SDA 0x37ff + >; + }; + + pinctrl_leds_debug: pinctrl-leds-debug { + fsl,pins = < + VF610_PAD_PTD3__GPIO_82 0x31c2 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB23__UART1_TX 0x21a2 + VF610_PAD_PTB24__UART1_RX 0x21a1 + >; + }; +}; |