diff options
Diffstat (limited to 'arch')
40 files changed, 173 insertions, 127 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 47d3a1ab08d2..817e5cfef83a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -131,7 +131,7 @@ endif KBUILD_CFLAGS +=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm KBUILD_AFLAGS +=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float -CHECKFLAGS += -D__arm__ +CHECKFLAGS += -D__arm__ -m32 #Default value head-y := arch/arm/kernel/head$(MMUEXT).o diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S index 5392ee63338f..8f6e37177de1 100644 --- a/arch/arm/boot/compressed/debug.S +++ b/arch/arm/boot/compressed/debug.S @@ -23,7 +23,11 @@ ENTRY(putc) strb r0, [r1] mov r0, #0x03 @ SYS_WRITEC ARM( svc #0x123456 ) +#ifdef CONFIG_CPU_V7M + THUMB( bkpt #0xab ) +#else THUMB( svc #0xab ) +#endif mov pc, lr .align 2 1: .word _GLOBAL_OFFSET_TABLE_ - . diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 7ff0811e61db..4960722aab32 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -178,7 +178,7 @@ }; i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; + compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; #address-cells = <1>; #size-cells = <0>; @@ -189,7 +189,7 @@ }; i2c1: i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; + compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi index 63a5af898165..cf0087b4c9e1 100644 --- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi +++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi @@ -67,8 +67,8 @@ pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii"; - ethernet-phy@1 { - reg = <0x1>; + ethernet-phy@0 { + reg = <0x0>; interrupt-parent = <&pioA>; interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index c7e9ccf2bc87..cbc26001247b 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -309,7 +309,7 @@ vddana-supply = <&vdd_3v3_lp_reg>; vref-supply = <&vdd_3v3_lp_reg>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_adc_default>; + pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>; status = "okay"; }; @@ -340,6 +340,20 @@ bias-disable; }; + /* + * The ADTRG pin can work on any edge type. + * In here it's being pulled up, so need to + * connect it to ground to get an edge e.g. + * Trigger can be configured on falling, rise + * or any edge, and the pull-up can be changed + * to pull-down or left floating according to + * needs. + */ + pinctrl_adtrg_default: adtrg_default { + pinmux = <PIN_PD31__ADTRG>; + bias-pull-up; + }; + pinctrl_charger_chglev: charger_chglev { pinmux = <PIN_PA12__GPIO>; bias-disable; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts index 82651c3eb682..b8565fc33eea 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts @@ -18,12 +18,9 @@ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835"; model = "Raspberry Pi Zero W"; - /* Needed by firmware to properly init UARTs */ - aliases { - uart0 = "/soc/serial@7e201000"; - uart1 = "/soc/serial@7e215040"; - serial0 = "/soc/serial@7e201000"; - serial1 = "/soc/serial@7e215040"; + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; }; leds { diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts index 20725ca487f3..c71a0d73d2a2 100644 --- a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts @@ -8,6 +8,11 @@ compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; model = "Raspberry Pi 3 Model B"; + chosen { + /* 8250 auxiliary UART instead of pl011 */ + stdout-path = "serial1:115200n8"; + }; + memory { reg = <0 0x40000000>; }; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 431dcfc900c0..013431e3d7c3 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -20,8 +20,13 @@ #address-cells = <1>; #size-cells = <1>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + chosen { - bootargs = "earlyprintk console=ttyAMA0"; + stdout-path = "serial0:115200n8"; }; thermal-zones { diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi index c68e8d430234..f0d178c77153 100644 --- a/arch/arm/boot/dts/gemini.dtsi +++ b/arch/arm/boot/dts/gemini.dtsi @@ -145,11 +145,12 @@ }; watchdog@41000000 { - compatible = "cortina,gemini-watchdog"; + compatible = "cortina,gemini-watchdog", "faraday,ftwdt010"; reg = <0x41000000 0x1000>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; resets = <&syscon GEMINI_RESET_WDOG>; clocks = <&syscon GEMINI_CLK_APB>; + clock-names = "PCLK"; }; uart0: serial@42000000 { diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index f46814a7ea44..4d308d17f040 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -144,10 +144,10 @@ interrupt-names = "msi"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX7D_PCIE_CTRL_ROOT_CLK>, <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>, <&clks IMX7D_PCIE_PHY_ROOT_CLK>; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi index 1f4c795d3f72..da7b3237bfe9 100644 --- a/arch/arm/boot/dts/moxart.dtsi +++ b/arch/arm/boot/dts/moxart.dtsi @@ -87,9 +87,10 @@ }; watchdog: watchdog@98500000 { - compatible = "moxa,moxart-watchdog"; + compatible = "moxa,moxart-watchdog", "faraday,ftwdt010"; reg = <0x98500000 0x10>; clocks = <&clk_apb>; + clock-names = "PCLK"; }; sdhci: sdhci@98e00000 { diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 38d2216c7ead..b1a26b42d190 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -1430,6 +1430,7 @@ atmel,min-sample-rate-hz = <200000>; atmel,max-sample-rate-hz = <20000000>; atmel,startup-time-ms = <4>; + atmel,trigger-edge-type = <IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index b147cb0dc14b..eef072a21acc 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -311,8 +311,8 @@ #size-cells = <0>; reg = <0>; - tcon1_in_drc1: endpoint@0 { - reg = <0>; + tcon1_in_drc1: endpoint@1 { + reg = <1>; remote-endpoint = <&drc1_out_tcon1>; }; }; @@ -1012,8 +1012,8 @@ #size-cells = <0>; reg = <1>; - be1_out_drc1: endpoint@0 { - reg = <0>; + be1_out_drc1: endpoint@1 { + reg = <1>; remote-endpoint = <&drc1_in_be1>; }; }; @@ -1042,8 +1042,8 @@ #size-cells = <0>; reg = <0>; - drc1_in_be1: endpoint@0 { - reg = <0>; + drc1_in_be1: endpoint@1 { + reg = <1>; remote-endpoint = <&be1_out_drc1>; }; }; @@ -1053,8 +1053,8 @@ #size-cells = <0>; reg = <1>; - drc1_out_tcon1: endpoint@0 { - reg = <0>; + drc1_out_tcon1: endpoint@1 { + reg = <1>; remote-endpoint = <&tcon1_in_drc1>; }; }; diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig index d5e1370ec303..830e817a028a 100644 --- a/arch/arm/configs/pxa_defconfig +++ b/arch/arm/configs/pxa_defconfig @@ -219,7 +219,8 @@ CONFIG_AD525X_DPOT_I2C=m CONFIG_ICS932S401=m CONFIG_APDS9802ALS=m CONFIG_ISL29003=m -CONFIG_TI_DAC7512=m +CONFIG_IIO=m +CONFIG_AD5446=m CONFIG_EEPROM_AT24=m CONFIG_SENSORS_LIS3_SPI=m CONFIG_IDE=m diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig index e3dc80ead465..77a56c23c6ef 100644 --- a/arch/arm/configs/raumfeld_defconfig +++ b/arch/arm/configs/raumfeld_defconfig @@ -37,7 +37,8 @@ CONFIG_MTD_NAND_PXA3xx=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_ISL29003=y -CONFIG_TI_DAC7512=y +CONFIG_IIO=y +CONFIG_AD5446=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index ea9646cc2a0e..0a498cb3fad8 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -115,7 +115,11 @@ ENTRY(printascii) mov r1, r0 mov r0, #0x04 @ SYS_WRITE0 ARM( svc #0x123456 ) +#ifdef CONFIG_CPU_V7M + THUMB( bkpt #0xab ) +#else THUMB( svc #0xab ) +#endif ret lr ENDPROC(printascii) @@ -124,7 +128,11 @@ ENTRY(printch) strb r0, [r1] mov r0, #0x03 @ SYS_WRITEC ARM( svc #0x123456 ) +#ifdef CONFIG_CPU_V7M + THUMB( bkpt #0xab ) +#else THUMB( svc #0xab ) +#endif ret lr ENDPROC(printch) diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 71a34e8c345a..57058ac46f49 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -32,6 +32,7 @@ #include <asm/mach/arch.h> #include "db8500-regs.h" +#include "pm_domains.h" static int __init ux500_l2x0_unlock(void) { @@ -157,6 +158,9 @@ static const struct of_device_id u8500_local_bus_nodes[] = { static void __init u8500_init_machine(void) { + /* Initialize ux500 power domains */ + ux500_pm_domains_init(); + /* automatically probe child nodes of dbx5x0 devices */ if (of_machine_is_compatible("st-ericsson,u8540")) of_platform_populate(NULL, u8500_local_bus_nodes, diff --git a/arch/arm/mach-ux500/pm.c b/arch/arm/mach-ux500/pm.c index a970e7fcba9e..f6c33a0c1c61 100644 --- a/arch/arm/mach-ux500/pm.c +++ b/arch/arm/mach-ux500/pm.c @@ -19,7 +19,6 @@ #include <linux/of_address.h> #include "db8500-regs.h" -#include "pm_domains.h" /* ARM WFI Standby signal register */ #define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130) @@ -203,7 +202,4 @@ void __init ux500_pm_init(u32 phy_base, u32 size) /* Set up ux500 suspend callbacks. */ suspend_set_ops(UX500_SUSPEND_OPS); - - /* Initialize ux500 power domains */ - ux500_pm_domains_init(); } diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 3b8e728cc944..91537d90f5f5 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -344,6 +344,11 @@ void __init arm_mm_memblock_reserve(void) * reserved here. */ #endif + /* + * In any case, always ensure address 0 is never used as many things + * get very confused if 0 is returned as a legitimate address. + */ + memblock_reserve(0, 1); } void __init adjust_lowmem_bounds(void) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts index caf8b6fbe5e3..d06e34b5d192 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts @@ -61,13 +61,6 @@ chosen { stdout-path = "serial0:115200n8"; }; - - reg_vcc3v3: vcc3v3 { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; }; &ehci0 { @@ -91,7 +84,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_vcc3v3>; + vmmc-supply = <®_dcdc1>; cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; cd-inverted; disable-wp; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index 8263a8a504a8..f2aa2a81de4d 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -336,7 +336,7 @@ /* non-prefetchable memory */ 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clocks = <&cpm_clk 1 13>; @@ -362,7 +362,7 @@ /* non-prefetchable memory */ 0x82000000 0 0xf7000000 0 0xf7000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; @@ -389,7 +389,7 @@ /* non-prefetchable memory */ 0x82000000 0 0xf8000000 0 0xf8000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cpm_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cpm_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index b71ee6c83668..4fe70323abb3 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -335,7 +335,7 @@ /* non-prefetchable memory */ 0x82000000 0 0xfa000000 0 0xfa000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 22 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; clocks = <&cps_clk 1 13>; @@ -361,7 +361,7 @@ /* non-prefetchable memory */ 0x82000000 0 0xfb000000 0 0xfb000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 24 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; @@ -388,7 +388,7 @@ /* non-prefetchable memory */ 0x82000000 0 0xfc000000 0 0xfc000000 0 0xf00000>; interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &cps_icu 0 ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map = <0 0 0 0 &cps_icu ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; interrupts = <ICU_GRP_NSR 23 IRQ_TYPE_LEVEL_HIGH>; num-lanes = <1>; diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 4786c67b5e65..d9d885006a8e 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -62,6 +62,7 @@ brightness-levels = <256 128 64 16 8 4 0>; default-brightness-level = <6>; + power-supply = <®_12v>; enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; }; @@ -83,6 +84,15 @@ regulator-always-on; }; + reg_12v: regulator2 { + compatible = "regulator-fixed"; + regulator-name = "fixed-12V"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-boot-on; + regulator-always-on; + }; + rsnd_ak4613: sound { compatible = "simple-audio-card"; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 6d615cb6e64d..41d61840fb99 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -582,7 +582,7 @@ vop_mmu: iommu@ff373f00 { compatible = "rockchip,iommu"; reg = <0x0 0xff373f00 0x0 0x100>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "vop_mmu"; #iommu-cells = <0>; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index 19fbaa5e7bdd..1070c8264c13 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -740,7 +740,7 @@ iep_mmu: iommu@ff900800 { compatible = "rockchip,iommu"; reg = <0x0 0xff900800 0x0 0x100>; - interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "iep_mmu"; #iommu-cells = <0>; status = "disabled"; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 7fd4bfcaa38e..fef82274a39d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -371,10 +371,10 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; + regulator-suspend-microvolt = <3000000>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 53ff3d191a1d..910628d18add 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -325,12 +325,12 @@ vcc_sd: LDO_REG4 { regulator-name = "vcc_sd"; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <3000000>; regulator-always-on; regulator-boot-on; regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; + regulator-suspend-microvolt = <3000000>; }; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi index 6c30bb02210d..0f873c897d0d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi @@ -315,10 +315,10 @@ regulator-always-on; regulator-boot-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; + regulator-max-microvolt = <3000000>; regulator-state-mem { regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; + regulator-suspend-microvolt = <3000000>; }; }; diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c index c6d6272a934f..7baa2265d439 100644 --- a/arch/parisc/kernel/parisc_ksyms.c +++ b/arch/parisc/kernel/parisc_ksyms.c @@ -35,12 +35,12 @@ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(__xchg8); EXPORT_SYMBOL(__xchg32); EXPORT_SYMBOL(__cmpxchg_u32); +EXPORT_SYMBOL(__cmpxchg_u64); #ifdef CONFIG_SMP EXPORT_SYMBOL(__atomic_hash); #endif #ifdef CONFIG_64BIT EXPORT_SYMBOL(__xchg64); -EXPORT_SYMBOL(__cmpxchg_u64); #endif #include <linux/uaccess.h> diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index 23de307c3052..41e60a9c7db2 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -742,7 +742,7 @@ lws_compare_and_swap_2: 10: ldd 0(%r25), %r25 11: ldd 0(%r24), %r24 #else - /* Load new value into r22/r23 - high/low */ + /* Load old value into r22/r23 - high/low */ 10: ldw 0(%r25), %r22 11: ldw 4(%r25), %r23 /* Load new value into fr4 for atomic store later */ @@ -834,11 +834,11 @@ cas2_action: copy %r0, %r28 #else /* Compare first word */ -19: ldw,ma 0(%r26), %r29 +19: ldw 0(%r26), %r29 sub,= %r29, %r22, %r0 b,n cas2_end /* Compare second word */ -20: ldw,ma 4(%r26), %r29 +20: ldw 4(%r26), %r29 sub,= %r29, %r23, %r0 b,n cas2_end /* Perform the store */ diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index 2d956aa0a38a..8c0105a49839 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -253,7 +253,10 @@ static int __init init_cr16_clocksource(void) cpu0_loc = per_cpu(cpu_data, 0).cpu_loc; for_each_online_cpu(cpu) { - if (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc) + if (cpu == 0) + continue; + if ((cpu0_loc != 0) && + (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc)) continue; clocksource_cr16.name = "cr16_unstable"; diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index afa46a7406ea..04e042edbab7 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -27,6 +27,7 @@ CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_BLK_DEV_RAM=y # CONFIG_BLK_DEV_XPRAM is not set # CONFIG_DCSSBLK is not set # CONFIG_DASD is not set @@ -59,6 +60,7 @@ CONFIG_CONFIGFS_FS=y # CONFIG_NETWORK_FILESYSTEMS is not set CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_PANIC_ON_OOPS=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 1cee6753d47a..495ff6959dec 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -293,7 +293,10 @@ static void pcpu_attach_task(struct pcpu *pcpu, struct task_struct *tsk) lc->lpp = LPP_MAGIC; lc->current_pid = tsk->pid; lc->user_timer = tsk->thread.user_timer; + lc->guest_timer = tsk->thread.guest_timer; lc->system_timer = tsk->thread.system_timer; + lc->hardirq_timer = tsk->thread.hardirq_timer; + lc->softirq_timer = tsk->thread.softirq_timer; lc->steal_timer = 0; } diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index c40a95c33bb8..322d25ae23ab 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -110,6 +110,10 @@ build_mmio_write(__writeq, "q", unsigned long, "r", ) #endif +#define ARCH_HAS_VALID_PHYS_ADDR_RANGE +extern int valid_phys_addr_range(phys_addr_t addr, size_t size); +extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size); + /** * virt_to_phys - map virtual addresses to physical * @address: address to remap diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index d362161d3291..c4aed0de565e 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -82,12 +82,21 @@ static inline u64 inc_mm_tlb_gen(struct mm_struct *mm) #define __flush_tlb_single(addr) __native_flush_tlb_single(addr) #endif -/* - * If tlb_use_lazy_mode is true, then we try to avoid switching CR3 to point - * to init_mm when we switch to a kernel thread (e.g. the idle thread). If - * it's false, then we immediately switch CR3 when entering a kernel thread. - */ -DECLARE_STATIC_KEY_TRUE(tlb_use_lazy_mode); +static inline bool tlb_defer_switch_to_init_mm(void) +{ + /* + * If we have PCID, then switching to init_mm is reasonably + * fast. If we don't have PCID, then switching to init_mm is + * quite slow, so we try to defer it in the hopes that we can + * avoid it entirely. The latter approach runs the risk of + * receiving otherwise unnecessary IPIs. + * + * This choice is just a heuristic. The tlb code can handle this + * function returning true or false regardless of whether we have + * PCID. + */ + return !static_cpu_has(X86_FEATURE_PCID); +} /* * 6 because 6 should be plenty and struct tlb_state will fit in diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 24f749324c0f..9990a71e311f 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -831,7 +831,6 @@ static int __cache_amd_cpumap_setup(unsigned int cpu, int index, } else if (boot_cpu_has(X86_FEATURE_TOPOEXT)) { unsigned int apicid, nshared, first, last; - this_leaf = this_cpu_ci->info_list + index; nshared = base->eax.split.num_threads_sharing + 1; apicid = cpu_data(cpu).apicid; first = apicid - (apicid % nshared); diff --git a/arch/x86/kernel/cpu/microcode/intel.c b/arch/x86/kernel/cpu/microcode/intel.c index 8f7a9bbad514..7dbcb7adf797 100644 --- a/arch/x86/kernel/cpu/microcode/intel.c +++ b/arch/x86/kernel/cpu/microcode/intel.c @@ -34,6 +34,7 @@ #include <linux/mm.h> #include <asm/microcode_intel.h> +#include <asm/intel-family.h> #include <asm/processor.h> #include <asm/tlbflush.h> #include <asm/setup.h> @@ -918,6 +919,18 @@ static int get_ucode_fw(void *to, const void *from, size_t n) return 0; } +static bool is_blacklisted(unsigned int cpu) +{ + struct cpuinfo_x86 *c = &cpu_data(cpu); + + if (c->x86 == 6 && c->x86_model == INTEL_FAM6_BROADWELL_X) { + pr_err_once("late loading on model 79 is disabled.\n"); + return true; + } + + return false; +} + static enum ucode_state request_microcode_fw(int cpu, struct device *device, bool refresh_fw) { @@ -926,6 +939,9 @@ static enum ucode_state request_microcode_fw(int cpu, struct device *device, const struct firmware *firmware; enum ucode_state ret; + if (is_blacklisted(cpu)) + return UCODE_NFOUND; + sprintf(name, "intel-ucode/%02x-%02x-%02x", c->x86, c->x86_model, c->x86_mask); @@ -950,6 +966,9 @@ static int get_ucode_user(void *to, const void *from, size_t n) static enum ucode_state request_microcode_user(int cpu, const void __user *buf, size_t size) { + if (is_blacklisted(cpu)) + return UCODE_NFOUND; + return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user); } diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index cf2ce063f65a..2902ca4d5993 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -30,10 +30,11 @@ static void __init i386_default_early_setup(void) asmlinkage __visible void __init i386_start_kernel(void) { - cr4_init_shadow(); - + /* Make sure IDT is set up before any exception happens */ idt_setup_early_handler(); + cr4_init_shadow(); + sanitize_boot_params(&boot_params); x86_early_init_platform_quirks(); diff --git a/arch/x86/mm/mmap.c b/arch/x86/mm/mmap.c index a99679826846..320c6237e1d1 100644 --- a/arch/x86/mm/mmap.c +++ b/arch/x86/mm/mmap.c @@ -174,3 +174,15 @@ const char *arch_vma_name(struct vm_area_struct *vma) return "[mpx]"; return NULL; } + +int valid_phys_addr_range(phys_addr_t addr, size_t count) +{ + return addr + count <= __pa(high_memory); +} + +int valid_mmap_phys_addr_range(unsigned long pfn, size_t count) +{ + phys_addr_t addr = (phys_addr_t)pfn << PAGE_SHIFT; + + return valid_phys_addr_range(addr, count); +} diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c index 658bf0090565..0f3d0cea4d00 100644 --- a/arch/x86/mm/tlb.c +++ b/arch/x86/mm/tlb.c @@ -30,7 +30,6 @@ atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1); -DEFINE_STATIC_KEY_TRUE(tlb_use_lazy_mode); static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen, u16 *new_asid, bool *need_flush) @@ -147,8 +146,8 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, this_cpu_write(cpu_tlbstate.is_lazy, false); if (real_prev == next) { - VM_BUG_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) != - next->context.ctx_id); + VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) != + next->context.ctx_id); /* * We don't currently support having a real mm loaded without @@ -213,6 +212,9 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, } /* + * Please ignore the name of this function. It should be called + * switch_to_kernel_thread(). + * * enter_lazy_tlb() is a hint from the scheduler that we are entering a * kernel thread or other context without an mm. Acceptable implementations * include doing nothing whatsoever, switching to init_mm, or various clever @@ -227,7 +229,7 @@ void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) if (this_cpu_read(cpu_tlbstate.loaded_mm) == &init_mm) return; - if (static_branch_unlikely(&tlb_use_lazy_mode)) { + if (tlb_defer_switch_to_init_mm()) { /* * There's a significant optimization that may be possible * here. We have accurate enough TLB flush tracking that we @@ -626,57 +628,3 @@ static int __init create_tlb_single_page_flush_ceiling(void) return 0; } late_initcall(create_tlb_single_page_flush_ceiling); - -static ssize_t tlblazy_read_file(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - char buf[2]; - - buf[0] = static_branch_likely(&tlb_use_lazy_mode) ? '1' : '0'; - buf[1] = '\n'; - - return simple_read_from_buffer(user_buf, count, ppos, buf, 2); -} - -static ssize_t tlblazy_write_file(struct file *file, - const char __user *user_buf, size_t count, loff_t *ppos) -{ - bool val; - - if (kstrtobool_from_user(user_buf, count, &val)) - return -EINVAL; - - if (val) - static_branch_enable(&tlb_use_lazy_mode); - else - static_branch_disable(&tlb_use_lazy_mode); - - return count; -} - -static const struct file_operations fops_tlblazy = { - .read = tlblazy_read_file, - .write = tlblazy_write_file, - .llseek = default_llseek, -}; - -static int __init init_tlb_use_lazy_mode(void) -{ - if (boot_cpu_has(X86_FEATURE_PCID)) { - /* - * Heuristic: with PCID on, switching to and from - * init_mm is reasonably fast, but remote flush IPIs - * as expensive as ever, so turn off lazy TLB mode. - * - * We can't do this in setup_pcid() because static keys - * haven't been initialized yet, and it would blow up - * badly. - */ - static_branch_disable(&tlb_use_lazy_mode); - } - - debugfs_create_file("tlb_use_lazy_mode", S_IRUSR | S_IWUSR, - arch_debugfs_dir, NULL, &fops_tlblazy); - return 0; -} -late_initcall(init_tlb_use_lazy_mode); |