diff options
Diffstat (limited to 'arch')
83 files changed, 444 insertions, 1568 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 54b479c35ee0..51dcd59eda6a 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -116,4 +116,6 @@ endmenu config SH_CLK_CPG bool +source "drivers/sh/Kconfig" + endif diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 46ca4d4abf91..32d9e2816e56 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -565,12 +565,50 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) + +static int fsi_set_rate(int is_porta, int rate) +{ + struct clk *fsib_clk; + struct clk *fdiv_clk = &sh7372_fsidivb_clk; + int ret; + + /* set_rate is not needed if port A */ + if (is_porta) + return 0; + + fsib_clk = clk_get(NULL, "fsib_clk"); + if (IS_ERR(fsib_clk)) + return -EINVAL; + + switch (rate) { + case 48000: + clk_set_rate(fsib_clk, clk_round_rate(fsib_clk, 85428000)); + clk_set_rate(fdiv_clk, clk_round_rate(fdiv_clk, 12204000)); + ret = SH_FSI_ACKMD_256 | SH_FSI_BPFMD_64; + break; + default: + pr_err("unsupported rate in FSI2 port B\n"); + ret = -EINVAL; + break; + } + + clk_put(fsib_clk); + + return ret; +} + static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | SH_FSI_IN_SLAVE_MODE | SH_FSI_OFMT(PCM) | SH_FSI_IFMT(PCM), + + .portb_flags = SH_FSI_BRS_INV | + SH_FSI_BRM_INV | + SH_FSI_LRS_INV | + SH_FSI_OFMT(SPDIF), + .set_rate = fsi_set_rate, }; static struct resource fsi_resources[] = { @@ -634,6 +672,7 @@ static struct platform_device lcdc1_device = { static struct sh_mobile_hdmi_info hdmi_info = { .lcd_chan = &sh_mobile_lcdc1_info.ch[0], .lcd_dev = &lcdc1_device.dev, + .flags = HDMI_SND_SRC_SPDIF, }; static struct resource hdmi_resources[] = { @@ -992,6 +1031,7 @@ static void __init ap4evb_map_io(void) #define GPIO_PORT9CR 0xE6051009 #define GPIO_PORT10CR 0xE605100A +#define USCCR1 0xE6058144 static void __init ap4evb_init(void) { u32 srcr4; @@ -1062,7 +1102,7 @@ static void __init ap4evb_init(void) /* setup USB phy */ __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ - /* enable FSI2 */ + /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); gpio_request(GPIO_FN_FSIAISLD, NULL); @@ -1079,6 +1119,10 @@ static void __init ap4evb_init(void) gpio_request(GPIO_PORT41, NULL); gpio_direction_input(GPIO_PORT41); + /* setup FSI2 port B (HDMI) */ + gpio_request(GPIO_FN_FSIBCK, NULL); + __raw_writew(__raw_readw(USCCR1) & ~(1 << 6), USCCR1); /* use SPDIF */ + /* set SPU2 clock to 119.6 MHz */ clk = clk_get(NULL, "spu_clk"); if (!IS_ERR(clk)) { diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index 8565aefa21fd..7db31e6c6bf2 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -50,6 +50,9 @@ #define SMSTPCR3 0xe615013c #define SMSTPCR4 0xe6150140 +#define FSIDIVA 0xFE1F8000 +#define FSIDIVB 0xFE1F8008 + /* Platforms must set frequency on their DV_CLKI pin */ struct clk sh7372_dv_clki_clk = { }; @@ -288,6 +291,7 @@ struct clk sh7372_pllc2_clk = { .ops = &pllc2_clk_ops, .parent = &extal1_div2_clk, .freq_table = pllc2_freq_table, + .nr_freqs = ARRAY_SIZE(pllc2_freq_table) - 1, .parent_table = pllc2_parent, .parent_num = ARRAY_SIZE(pllc2_parent), }; @@ -417,6 +421,101 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = { fsibckcr_parent, ARRAY_SIZE(fsibckcr_parent), 6, 2), }; +/* FSI DIV */ +static unsigned long fsidiv_recalc(struct clk *clk) +{ + unsigned long value; + + value = __raw_readl(clk->mapping->base); + + if ((value & 0x3) != 0x3) + return 0; + + value >>= 16; + if (value < 2) + return 0; + + return clk->parent->rate / value; +} + +static long fsidiv_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_div_range_round(clk, 2, 0xffff, rate); +} + +static void fsidiv_disable(struct clk *clk) +{ + __raw_writel(0, clk->mapping->base); +} + +static int fsidiv_enable(struct clk *clk) +{ + unsigned long value; + + value = __raw_readl(clk->mapping->base) >> 16; + if (value < 2) { + fsidiv_disable(clk); + return -ENOENT; + } + + __raw_writel((value << 16) | 0x3, clk->mapping->base); + + return 0; +} + +static int fsidiv_set_rate(struct clk *clk, + unsigned long rate, int algo_id) +{ + int idx; + + if (clk->parent->rate == rate) { + fsidiv_disable(clk); + return 0; + } + + idx = (clk->parent->rate / rate) & 0xffff; + if (idx < 2) + return -ENOENT; + + __raw_writel(idx << 16, clk->mapping->base); + return fsidiv_enable(clk); +} + +static struct clk_ops fsidiv_clk_ops = { + .recalc = fsidiv_recalc, + .round_rate = fsidiv_round_rate, + .set_rate = fsidiv_set_rate, + .enable = fsidiv_enable, + .disable = fsidiv_disable, +}; + +static struct clk_mapping sh7372_fsidiva_clk_mapping = { + .phys = FSIDIVA, + .len = 8, +}; + +struct clk sh7372_fsidiva_clk = { + .ops = &fsidiv_clk_ops, + .parent = &div6_reparent_clks[DIV6_FSIA], /* late install */ + .mapping = &sh7372_fsidiva_clk_mapping, +}; + +static struct clk_mapping sh7372_fsidivb_clk_mapping = { + .phys = FSIDIVB, + .len = 8, +}; + +struct clk sh7372_fsidivb_clk = { + .ops = &fsidiv_clk_ops, + .parent = &div6_reparent_clks[DIV6_FSIB], /* late install */ + .mapping = &sh7372_fsidivb_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &sh7372_fsidiva_clk, + &sh7372_fsidivb_clk, +}; + enum { MSTP001, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, @@ -585,6 +684,9 @@ void __init sh7372_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h index 5bc6bd444d72..2b1bb9e43dda 100644 --- a/arch/arm/mach-shmobile/include/mach/gpio.h +++ b/arch/arm/mach-shmobile/include/mach/gpio.h @@ -35,12 +35,12 @@ static inline int gpio_cansleep(unsigned gpio) static inline int gpio_to_irq(unsigned gpio) { - return -ENOSYS; + return __gpio_to_irq(gpio); } static inline int irq_to_gpio(unsigned int irq) { - return -EINVAL; + return -ENOSYS; } #endif /* CONFIG_GPIOLIB */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index 147775a94bce..e4f9004e7103 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -464,5 +464,7 @@ extern struct clk sh7372_dv_clki_div2_clk; extern struct clk sh7372_pllc2_clk; extern struct clk sh7372_fsiack_clk; extern struct clk sh7372_fsibck_clk; +extern struct clk sh7372_fsidiva_clk; +extern struct clk sh7372_fsidivb_clk; #endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index edb2c0d255c2..00869def5420 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -67,7 +67,7 @@ static struct spi_board_info u300_spi_devices[] = { .bus_num = 0, /* Only one bus on this chip */ .chip_select = 0, /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = SPI_MODE_1 | SPI_LSB_FIRST | SPI_LOOP, + .mode = SPI_MODE_1 | SPI_LOOP, }, #endif }; diff --git a/arch/m68k/include/asm/irqflags.h b/arch/m68k/include/asm/irqflags.h index 4a5b284a1550..7ef4115b8c4a 100644 --- a/arch/m68k/include/asm/irqflags.h +++ b/arch/m68k/include/asm/irqflags.h @@ -2,7 +2,9 @@ #define _M68K_IRQFLAGS_H #include <linux/types.h> +#ifdef CONFIG_MMU #include <linux/hardirq.h> +#endif #include <linux/preempt.h> #include <asm/thread_info.h> #include <asm/entry.h> diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h index 789f3b2de0e9..415d5484916c 100644 --- a/arch/m68k/include/asm/machdep.h +++ b/arch/m68k/include/asm/machdep.h @@ -40,5 +40,6 @@ extern unsigned long hw_timer_offset(void); extern irqreturn_t arch_timer_interrupt(int irq, void *dummy); extern void config_BSP(char *command, int len); +extern void do_IRQ(int irq, struct pt_regs *fp); #endif /* _M68K_MACHDEP_H */ diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c index 428d0e538aec..b06bdae04064 100644 --- a/arch/powerpc/kernel/kvm.c +++ b/arch/powerpc/kernel/kvm.c @@ -127,7 +127,7 @@ static void kvm_patch_ins_nop(u32 *inst) static void kvm_patch_ins_b(u32 *inst, int addr) { -#ifdef CONFIG_RELOCATABLE +#if defined(CONFIG_RELOCATABLE) && defined(CONFIG_PPC_BOOK3S) /* On relocatable kernels interrupts handlers and our code can be in different regions, so we don't patch them */ diff --git a/arch/powerpc/kvm/booke_interrupts.S b/arch/powerpc/kvm/booke_interrupts.S index 049846911ce4..1cc471faac2d 100644 --- a/arch/powerpc/kvm/booke_interrupts.S +++ b/arch/powerpc/kvm/booke_interrupts.S @@ -416,7 +416,7 @@ lightweight_exit: lwz r3, VCPU_PC(r4) mtsrr0 r3 lwz r3, VCPU_SHARED(r4) - lwz r3, VCPU_SHARED_MSR(r3) + lwz r3, (VCPU_SHARED_MSR + 4)(r3) oris r3, r3, KVMPPC_MSR_MASK@h ori r3, r3, KVMPPC_MSR_MASK@l mtsrr1 r3 diff --git a/arch/powerpc/kvm/e500.c b/arch/powerpc/kvm/e500.c index 71750f2dd5d3..e3768ee9b595 100644 --- a/arch/powerpc/kvm/e500.c +++ b/arch/powerpc/kvm/e500.c @@ -138,8 +138,8 @@ void kvmppc_core_vcpu_free(struct kvm_vcpu *vcpu) struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu); free_page((unsigned long)vcpu->arch.shared); - kvmppc_e500_tlb_uninit(vcpu_e500); kvm_vcpu_uninit(vcpu); + kvmppc_e500_tlb_uninit(vcpu_e500); kmem_cache_free(kvm_vcpu_cache, vcpu_e500); } diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c index 2f87a1627f6c..38f756f25053 100644 --- a/arch/powerpc/kvm/powerpc.c +++ b/arch/powerpc/kvm/powerpc.c @@ -617,6 +617,7 @@ long kvm_arch_vm_ioctl(struct file *filp, switch (ioctl) { case KVM_PPC_GET_PVINFO: { struct kvm_ppc_pvinfo pvinfo; + memset(&pvinfo, 0, sizeof(pvinfo)); r = kvm_vm_ioctl_get_pvinfo(&pvinfo); if (copy_to_user(argp, &pvinfo, sizeof(pvinfo))) { r = -EFAULT; diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c index 46fa04f12a9b..a021f5827a33 100644 --- a/arch/powerpc/kvm/timing.c +++ b/arch/powerpc/kvm/timing.c @@ -35,7 +35,6 @@ void kvmppc_init_timing_stats(struct kvm_vcpu *vcpu) int i; /* pause guest execution to avoid concurrent updates */ - local_irq_disable(); mutex_lock(&vcpu->mutex); vcpu->arch.last_exit_type = 0xDEAD; @@ -51,7 +50,6 @@ void kvmppc_init_timing_stats(struct kvm_vcpu *vcpu) vcpu->arch.timing_last_enter.tv64 = 0; mutex_unlock(&vcpu->mutex); - local_irq_enable(); } static void add_exit_timing(struct kvm_vcpu *vcpu, u64 duration, int type) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 5c075f562eba..7f217b3a50a8 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -193,6 +193,7 @@ config CPU_SH2 config CPU_SH2A bool select CPU_SH2 + select UNCACHED_MAPPING config CPU_SH3 bool diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 307b3a4a790b..9c8c6e1a2a15 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -133,10 +133,7 @@ machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast machdir-$(CONFIG_SH_SH03) += mach-sh03 -machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d -machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh -machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705 machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander machdir-$(CONFIG_SH_MIGOR) += mach-migor machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 9c94711aa6ca..2018c7ea4c93 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -81,13 +81,6 @@ config SH_7343_SOLUTION_ENGINE Select 7343 SolutionEngine if configuring for a Hitachi SH7343 (SH-Mobile 3AS) evaluation board. -config SH_7751_SYSTEMH - bool "SystemH7751R" - depends on CPU_SUBTYPE_SH7751R - help - Select SystemH if you are configuring for a Renesas SystemH - 7751R evaluation board. - config SH_HP6XX bool "HP6XX" select SYS_SUPPORTS_APM_EMULATION diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index 38ef655cc0f0..be7d11d04b26 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -2,10 +2,12 @@ # Specific board support, not covered by a mach group. # obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o +obj-$(CONFIG_SH_SECUREEDGE5410) += board-secureedge5410.o obj-$(CONFIG_SH_SH2007) += board-sh2007.o obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o obj-$(CONFIG_SH_URQUELL) += board-urquell.o obj-$(CONFIG_SH_SHMIN) += board-shmin.o +obj-$(CONFIG_SH_EDOSK7705) += board-edosk7705.o obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o obj-$(CONFIG_SH_ESPT) += board-espt.o obj-$(CONFIG_SH_POLARIS) += board-polaris.o diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c new file mode 100644 index 000000000000..4cb3bb74c36f --- /dev/null +++ b/arch/sh/boards/board-edosk7705.c @@ -0,0 +1,78 @@ +/* + * arch/sh/boards/renesas/edosk7705/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for edosk7705 development + * board by S. Dunn, 2003. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/smc91x.h> +#include <asm/machvec.h> +#include <asm/sizes.h> + +#define SMC_IOBASE 0xA2000000 +#define SMC_IO_OFFSET 0x300 +#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET) + +#define ETHERNET_IRQ 0x09 + +static void __init sh_edosk7705_init_irq(void) +{ + make_imask_irq(ETHERNET_IRQ); +} + +/* eth initialization functions */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL, +}; + +static struct resource smc91x_res[] = { + [0] = { + .start = SMC_IOADDR, + .end = SMC_IOADDR + SZ_32 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ETHERNET_IRQ, + .end = ETHERNET_IRQ, + .flags = IORESOURCE_IRQ , + } +}; + +static struct platform_device smc91x_dev = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_res), + .resource = smc91x_res, + + .dev = { + .platform_data = &smc91x_info, + }, +}; + +/* platform init code */ +static struct platform_device *edosk7705_devices[] __initdata = { + &smc91x_dev, +}; + +static int __init init_edosk7705_devices(void) +{ + return platform_add_devices(edosk7705_devices, + ARRAY_SIZE(edosk7705_devices)); +} +__initcall(init_edosk7705_devices); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_edosk7705 __initmv = { + .mv_name = "EDOSK7705", + .mv_nr_irqs = 80, + .mv_init_irq = sh_edosk7705_init_irq, +}; diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/board-secureedge5410.c index 331745dee379..32f875e8493d 100644 --- a/arch/sh/boards/mach-snapgear/setup.c +++ b/arch/sh/boards/board-secureedge5410.c @@ -1,6 +1,4 @@ /* - * linux/arch/sh/boards/snapgear/setup.c - * * Copyright (C) 2002 David McCullough <davidm@snapgear.com> * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> * @@ -19,18 +17,19 @@ #include <linux/module.h> #include <linux/sched.h> #include <asm/machvec.h> -#include <mach/snapgear.h> +#include <mach/secureedge5410.h> #include <asm/irq.h> #include <asm/io.h> #include <cpu/timer.h> +unsigned short secureedge5410_ioport; + /* * EraseConfig handling functions */ - static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { - (void)__raw_readb(0xb8000000); /* dummy read */ + ctrl_delay(); /* dummy read */ printk("SnapGear: erase switch interrupt!\n"); @@ -39,21 +38,22 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) static int __init eraseconfig_init(void) { + unsigned int irq = evt2irq(0x240); + printk("SnapGear: EraseConfig init\n"); + /* Setup "EraseConfig" switch on external IRQ 0 */ - if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED, + if (request_irq(irq, eraseconfig_interrupt, IRQF_DISABLED, "Erase Config", NULL)) printk("SnapGear: failed to register IRQ%d for Reset witch\n", - IRL0_IRQ); + irq); else printk("SnapGear: registered EraseConfig switch on IRQ%d\n", - IRL0_IRQ); - return(0); + irq); + return 0; } - module_init(eraseconfig_init); -/****************************************************************************/ /* * Initialize IRQ setting * @@ -62,7 +62,6 @@ module_init(eraseconfig_init); * IRL2 = eth1 * IRL3 = crypto */ - static void __init init_snapgear_IRQ(void) { printk("Setup SnapGear IRQ/IPR ...\n"); @@ -76,20 +75,5 @@ static void __init init_snapgear_IRQ(void) static struct sh_machine_vector mv_snapgear __initmv = { .mv_name = "SnapGear SecureEdge5410", .mv_nr_irqs = 72, - - .mv_inb = snapgear_inb, - .mv_inw = snapgear_inw, - .mv_inl = snapgear_inl, - .mv_outb = snapgear_outb, - .mv_outw = snapgear_outw, - .mv_outl = snapgear_outl, - - .mv_inb_p = snapgear_inb_p, - .mv_inw_p = snapgear_inw, - .mv_inl_p = snapgear_inl, - .mv_outb_p = snapgear_outb_p, - .mv_outw_p = snapgear_outw, - .mv_outl_p = snapgear_outl, - .mv_init_irq = init_snapgear_IRQ, }; diff --git a/arch/sh/boards/mach-edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile deleted file mode 100644 index cd54acb51499..000000000000 --- a/arch/sh/boards/mach-edosk7705/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the EDOSK7705 specific parts of the kernel -# - -obj-y := setup.o io.o diff --git a/arch/sh/boards/mach-edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c deleted file mode 100644 index 5b9c57c43241..000000000000 --- a/arch/sh/boards/mach-edosk7705/io.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * arch/sh/boards/renesas/edosk7705/io.c - * - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routines for Hitachi EDOSK7705 board. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/io.h> -#include <mach/edosk7705.h> -#include <asm/addrspace.h> - -#define SMC_IOADDR 0xA2000000 - -/* Map the Ethernet addresses as if it is at 0x300 - 0x320 */ -static unsigned long sh_edosk7705_isa_port2addr(unsigned long port) -{ - /* - * SMC91C96 registers are 4 byte aligned rather than the - * usual 2 byte! - */ - if (port >= 0x300 && port < 0x320) - return SMC_IOADDR + ((port - 0x300) * 2); - - maybebadio(port); - return port; -} - -/* Trying to read / write bytes on odd-byte boundaries to the Ethernet - * registers causes problems. So we bit-shift the value and read / write - * in 2 byte chunks. Setting the low byte to 0 does not cause problems - * now as odd byte writes are only made on the bit mask / interrupt - * register. This may not be the case in future Mar-2003 SJD - */ -unsigned char sh_edosk7705_inb(unsigned long port) -{ - if (port >= 0x300 && port < 0x320 && port & 0x01) - return __raw_readw(port - 1) >> 8; - - return __raw_readb(sh_edosk7705_isa_port2addr(port)); -} - -void sh_edosk7705_outb(unsigned char value, unsigned long port) -{ - if (port >= 0x300 && port < 0x320 && port & 0x01) { - __raw_writew(((unsigned short)value << 8), port - 1); - return; - } - - __raw_writeb(value, sh_edosk7705_isa_port2addr(port)); -} - -void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned char *p = addr; - - while (count--) - *p++ = sh_edosk7705_inb(port); -} - -void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned char *p = (unsigned char *)addr; - - while (count--) - sh_edosk7705_outb(*p++, port); -} diff --git a/arch/sh/boards/mach-edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c deleted file mode 100644 index d59225e26fb9..000000000000 --- a/arch/sh/boards/mach-edosk7705/setup.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/sh/boards/renesas/edosk7705/setup.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SolutionEngine Support. - * - * Modified for edosk7705 development - * board by S. Dunn, 2003. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <asm/machvec.h> -#include <mach/edosk7705.h> - -static void __init sh_edosk7705_init_irq(void) -{ - /* This is the Ethernet interrupt */ - make_imask_irq(0x09); -} - -/* - * The Machine Vector - */ -static struct sh_machine_vector mv_edosk7705 __initmv = { - .mv_name = "EDOSK7705", - .mv_nr_irqs = 80, - - .mv_inb = sh_edosk7705_inb, - .mv_outb = sh_edosk7705_outb, - - .mv_insb = sh_edosk7705_insb, - .mv_outsb = sh_edosk7705_outsb, - - .mv_init_irq = sh_edosk7705_init_irq, -}; diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c index 2960c659020e..acdafb0c6404 100644 --- a/arch/sh/boards/mach-microdev/io.c +++ b/arch/sh/boards/mach-microdev/io.c @@ -54,7 +54,7 @@ /* * map I/O ports to memory-mapped addresses */ -static unsigned long microdev_isa_port2addr(unsigned long offset) +void __iomem *microdev_ioport_map(unsigned long offset, unsigned int len) { unsigned long result; @@ -72,16 +72,6 @@ static unsigned long microdev_isa_port2addr(unsigned long offset) * Configuration Registers */ result = IO_SUPERIO_PHYS + (offset << 1); -#if 0 - } else if (offset == KBD_DATA_REG || offset == KBD_CNTL_REG || - offset == KBD_STATUS_REG) { - /* - * SMSC FDC37C93xAPM SuperIO chip - * - * PS/2 Keyboard + Mouse (ports 0x60 and 0x64). - */ - result = IO_SUPERIO_PHYS + (offset << 1); -#endif } else if (((offset >= IO_IDE1_BASE) && (offset < IO_IDE1_BASE + IO_IDE_EXTENT)) || (offset == IO_IDE1_MISC)) { @@ -131,237 +121,5 @@ static unsigned long microdev_isa_port2addr(unsigned long offset) result = PVR; } - return result; -} - -#define PORT2ADDR(x) (microdev_isa_port2addr(x)) - -static inline void delay(void) -{ -#if defined(CONFIG_PCI) - /* System board present, just make a dummy SRAM access. (CS0 will be - mapped to PCI memory, probably good to avoid it.) */ - __raw_readw(0xa6800000); -#else - /* CS0 will be mapped to flash, ROM etc so safe to access it. */ - __raw_readw(0xa0000000); -#endif -} - -unsigned char microdev_inb(unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) - return microdev_pci_inb(port); -#endif - return *(volatile unsigned char*)PORT2ADDR(port); -} - -unsigned short microdev_inw(unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) - return microdev_pci_inw(port); -#endif - return *(volatile unsigned short*)PORT2ADDR(port); -} - -unsigned int microdev_inl(unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) - return microdev_pci_inl(port); -#endif - return *(volatile unsigned int*)PORT2ADDR(port); -} - -void microdev_outw(unsigned short b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outw(b, port); - return; - } -#endif - *(volatile unsigned short*)PORT2ADDR(port) = b; -} - -void microdev_outb(unsigned char b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outb(b, port); - return; - } -#endif - - /* - * There is a board feature with the current SH4-202 MicroDev in - * that the 2 byte enables (nBE0 and nBE1) are tied together (and - * to the Chip Select Line (Ethernet_CS)). Due to this connectivity, - * it is not possible to safely perform 8-bit writes to the - * Ethernet registers, as 16-bits will be consumed from the Data - * lines (corrupting the other byte). Hence, this function is - * written to implement 16-bit read/modify/write for all byte-wide - * accesses. - * - * Note: there is no problem with byte READS (even or odd). - * - * Sean McGoogan - 16th June 2003. - */ - if ((port >= IO_LAN91C111_BASE) && - (port < IO_LAN91C111_BASE + IO_LAN91C111_EXTENT)) { - /* - * Then are trying to perform a byte-write to the - * LAN91C111. This needs special care. - */ - if (port % 2 == 1) { /* is the port odd ? */ - /* unset bit-0, i.e. make even */ - const unsigned long evenPort = port-1; - unsigned short word; - - /* - * do a 16-bit read/write to write to 'port', - * preserving even byte. - * - * Even addresses are bits 0-7 - * Odd addresses are bits 8-15 - */ - word = microdev_inw(evenPort); - word = (word & 0xffu) | (b << 8); - microdev_outw(word, evenPort); - } else { - /* else, we are trying to do an even byte write */ - unsigned short word; - - /* - * do a 16-bit read/write to write to 'port', - * preserving odd byte. - * - * Even addresses are bits 0-7 - * Odd addresses are bits 8-15 - */ - word = microdev_inw(port); - word = (word & 0xff00u) | (b); - microdev_outw(word, port); - } - } else { - *(volatile unsigned char*)PORT2ADDR(port) = b; - } -} - -void microdev_outl(unsigned int b, unsigned long port) -{ -#ifdef CONFIG_PCI - if (port >= PCIBIOS_MIN_IO) { - microdev_pci_outl(b, port); - return; - } -#endif - *(volatile unsigned int*)PORT2ADDR(port) = b; -} - -unsigned char microdev_inb_p(unsigned long port) -{ - unsigned char v = microdev_inb(port); - delay(); - return v; -} - -unsigned short microdev_inw_p(unsigned long port) -{ - unsigned short v = microdev_inw(port); - delay(); - return v; -} - -unsigned int microdev_inl_p(unsigned long port) -{ - unsigned int v = microdev_inl(port); - delay(); - return v; -} - -void microdev_outb_p(unsigned char b, unsigned long port) -{ - microdev_outb(b, port); - delay(); -} - -void microdev_outw_p(unsigned short b, unsigned long port) -{ - microdev_outw(b, port); - delay(); -} - -void microdev_outl_p(unsigned int b, unsigned long port) -{ - microdev_outl(b, port); - delay(); -} - -void microdev_insb(unsigned long port, void *buffer, unsigned long count) -{ - volatile unsigned char *port_addr; - unsigned char *buf = buffer; - - port_addr = (volatile unsigned char *)PORT2ADDR(port); - - while (count--) - *buf++ = *port_addr; -} - -void microdev_insw(unsigned long port, void *buffer, unsigned long count) -{ - volatile unsigned short *port_addr; - unsigned short *buf = buffer; - - port_addr = (volatile unsigned short *)PORT2ADDR(port); - - while (count--) - *buf++ = *port_addr; -} - -void microdev_insl(unsigned long port, void *buffer, unsigned long count) -{ - volatile unsigned long *port_addr; - unsigned int *buf = buffer; - - port_addr = (volatile unsigned long *)PORT2ADDR(port); - - while (count--) - *buf++ = *port_addr; -} - -void microdev_outsb(unsigned long port, const void *buffer, unsigned long count) -{ - volatile unsigned char *port_addr; - const unsigned char *buf = buffer; - - port_addr = (volatile unsigned char *)PORT2ADDR(port); - - while (count--) - *port_addr = *buf++; -} - -void microdev_outsw(unsigned long port, const void *buffer, unsigned long count) -{ - volatile unsigned short *port_addr; - const unsigned short *buf = buffer; - - port_addr = (volatile unsigned short *)PORT2ADDR(port); - - while (count--) - *port_addr = *buf++; -} - -void microdev_outsl(unsigned long port, const void *buffer, unsigned long count) -{ - volatile unsigned long *port_addr; - const unsigned int *buf = buffer; - - port_addr = (volatile unsigned long *)PORT2ADDR(port); - - while (count--) - *port_addr = *buf++; + return (void __iomem *)result; } diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c index d1df2a4fb9b8..d8a747291e03 100644 --- a/arch/sh/boards/mach-microdev/setup.c +++ b/arch/sh/boards/mach-microdev/setup.c @@ -195,27 +195,6 @@ device_initcall(microdev_devices_setup); static struct sh_machine_vector mv_sh4202_microdev __initmv = { .mv_name = "SH4-202 MicroDev", .mv_nr_irqs = 72, - - .mv_inb = microdev_inb, - .mv_inw = microdev_inw, - .mv_inl = microdev_inl, - .mv_outb = microdev_outb, - .mv_outw = microdev_outw, - .mv_outl = microdev_outl, - - .mv_inb_p = microdev_inb_p, - .mv_inw_p = microdev_inw_p, - .mv_inl_p = microdev_inl_p, - .mv_outb_p = microdev_outb_p, - .mv_outw_p = microdev_outw_p, - .mv_outl_p = microdev_outl_p, - - .mv_insb = microdev_insb, - .mv_insw = microdev_insw, - .mv_insl = microdev_insl, - .mv_outsb = microdev_outsb, - .mv_outsw = microdev_outsw, - .mv_outsl = microdev_outsl, - + .mv_ioport_map = microdev_ioport_map, .mv_init_irq = init_microdev_irq, }; diff --git a/arch/sh/boards/mach-se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile index 63e7ed699f39..5c9eaa0535b9 100644 --- a/arch/sh/boards/mach-se/7206/Makefile +++ b/arch/sh/boards/mach-se/7206/Makefile @@ -2,4 +2,4 @@ # Makefile for the 7206 SolutionEngine specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c deleted file mode 100644 index adadc77532ee..000000000000 --- a/arch/sh/boards/mach-se/7206/io.c +++ /dev/null @@ -1,104 +0,0 @@ -/* $Id: io.c,v 1.5 2004/02/22 23:08:43 kkojima Exp $ - * - * linux/arch/sh/boards/se/7206/io.c - * - * Copyright (C) 2006 Yoshinori Sato - * - * I/O routine for Hitachi 7206 SolutionEngine. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <mach-se/mach/se7206.h> - - -static inline void delay(void) -{ - __raw_readw(0x20000000); /* P2 ROM Area */ -} - -/* MS7750 requires special versions of in*, out* routines, since - PC-like io ports are located at upper half byte of 16-bit word which - can be accessed only with 16-bit wide. */ - -static inline volatile __u16 * -port2adr(unsigned int port) -{ - if (port >= 0x2000 && port < 0x2020) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - else if (port >= 0x300 && port < 0x310) - return (volatile __u16 *) (PA_SMSC + (port - 0x300)); - - return (volatile __u16 *)port; -} - -unsigned char se7206_inb(unsigned long port) -{ - return (*port2adr(port)) & 0xff; -} - -unsigned char se7206_inb_p(unsigned long port) -{ - unsigned long v; - - v = (*port2adr(port)) & 0xff; - delay(); - return v; -} - -unsigned short se7206_inw(unsigned long port) -{ - return *port2adr(port); -} - -void se7206_outb(unsigned char value, unsigned long port) -{ - *(port2adr(port)) = value; -} - -void se7206_outb_p(unsigned char value, unsigned long port) -{ - *(port2adr(port)) = value; - delay(); -} - -void se7206_outw(unsigned short value, unsigned long port) -{ - *port2adr(port) = value; -} - -void se7206_insb(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u8 *ap = addr; - - while (count--) - *ap++ = *p; -} - -void se7206_insw(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u16 *ap = addr; - while (count--) - *ap++ = *p; -} - -void se7206_outsb(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u8 *ap = addr; - - while (count--) - *p = *ap++; -} - -void se7206_outsw(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u16 *ap = addr; - while (count--) - *p = *ap++; -} diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index 883b21eacaa6..d961949600fd 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -139,11 +139,13 @@ void __init init_se7206_IRQ(void) make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ make_se7206_irq(IRQ1_IRQ); /* ATA */ make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ - __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + + __raw_writew(__raw_readw(INTC_ICR1) | 0x000b, INTC_ICR); /* ICR1 */ /* FPGA System register setup*/ __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */ __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */ + /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ __raw_writew(0x0001,INTSEL); } diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index 8f5c65d43d1d..7f4871c71a01 100644 --- a/arch/sh/boards/mach-se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -86,20 +86,5 @@ __initcall(se7206_devices_setup); static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_nr_irqs = 256, - .mv_inb = se7206_inb, - .mv_inw = se7206_inw, - .mv_outb = se7206_outb, - .mv_outw = se7206_outw, - - .mv_inb_p = se7206_inb_p, - .mv_inw_p = se7206_inw, - .mv_outb_p = se7206_outb_p, - .mv_outw_p = se7206_outw, - - .mv_insb = se7206_insb, - .mv_insw = se7206_insw, - .mv_outsb = se7206_outsb, - .mv_outsw = se7206_outsw, - .mv_init_irq = init_se7206_IRQ, }; diff --git a/arch/sh/boards/mach-se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile index 8e624b06d5ea..43ea14feef51 100644 --- a/arch/sh/boards/mach-se/770x/Makefile +++ b/arch/sh/boards/mach-se/770x/Makefile @@ -2,4 +2,4 @@ # Makefile for the 770x SolutionEngine specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c deleted file mode 100644 index 28833c8786ea..000000000000 --- a/arch/sh/boards/mach-se/770x/io.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Copyright (C) 2000 Kazumoto Kojima - * - * I/O routine for Hitachi SolutionEngine. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/io.h> -#include <mach-se/mach/se.h> - -/* MS7750 requires special versions of in*, out* routines, since - PC-like io ports are located at upper half byte of 16-bit word which - can be accessed only with 16-bit wide. */ - -static inline volatile __u16 * -port2adr(unsigned int port) -{ - if (port & 0xff000000) - return ( volatile __u16 *) port; - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - else if (port >= 0x1000) - return (volatile __u16 *) (PA_83902 + (port << 1)); - else - return (volatile __u16 *) (PA_SUPERIO + (port << 1)); -} - -static inline int -shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -unsigned char se_inb(unsigned long port) -{ - if (shifted_port(port)) - return (*port2adr(port) >> 8); - else - return (*port2adr(port))&0xff; -} - -unsigned char se_inb_p(unsigned long port) -{ - unsigned long v; - - if (shifted_port(port)) - v = (*port2adr(port) >> 8); - else - v = (*port2adr(port))&0xff; - ctrl_delay(); - return v; -} - -unsigned short se_inw(unsigned long port) -{ - if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int se_inl(unsigned long port) -{ - maybebadio(port); - return 0; -} - -void se_outb(unsigned char value, unsigned long port) -{ - if (shifted_port(port)) - *(port2adr(port)) = value << 8; - else - *(port2adr(port)) = value; -} - -void se_outb_p(unsigned char value, unsigned long port) -{ - if (shifted_port(port)) - *(port2adr(port)) = value << 8; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void se_outw(unsigned short value, unsigned long port) -{ - if (port >= 0x2000) - *port2adr(port) = value; - else - maybebadio(port); -} - -void se_outl(unsigned int value, unsigned long port) -{ - maybebadio(port); -} - -void se_insb(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u8 *ap = addr; - - if (shifted_port(port)) { - while (count--) - *ap++ = *p >> 8; - } else { - while (count--) - *ap++ = *p; - } -} - -void se_insw(unsigned long port, void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - __u16 *ap = addr; - while (count--) - *ap++ = *p; -} - -void se_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void se_outsb(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u8 *ap = addr; - - if (shifted_port(port)) { - while (count--) - *p = *ap++ << 8; - } else { - while (count--) - *p = *ap++; - } -} - -void se_outsw(unsigned long port, const void *addr, unsigned long count) -{ - volatile __u16 *p = port2adr(port); - const __u16 *ap = addr; - - while (count--) - *p = *ap++; -} - -void se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c index 66d39d1b0901..31330c65c0ce 100644 --- a/arch/sh/boards/mach-se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -195,27 +195,5 @@ static struct sh_machine_vector mv_se __initmv = { #elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) .mv_nr_irqs = 104, #endif - - .mv_inb = se_inb, - .mv_inw = se_inw, - .mv_inl = se_inl, - .mv_outb = se_outb, - .mv_outw = se_outw, - .mv_outl = se_outl, - - .mv_inb_p = se_inb_p, - .mv_inw_p = se_inw, - .mv_inl_p = se_inl, - .mv_outb_p = se_outb_p, - .mv_outw_p = se_outw, - .mv_outl_p = se_outl, - - .mv_insb = se_insb, - .mv_insw = se_insw, - .mv_insl = se_insl, - .mv_outsb = se_outsb, - .mv_outsw = se_outsw, - .mv_outsl = se_outsl, - .mv_init_irq = init_se_IRQ, }; diff --git a/arch/sh/boards/mach-se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile index e6f4341bfe6e..a338fd9d5039 100644 --- a/arch/sh/boards/mach-se/7751/Makefile +++ b/arch/sh/boards/mach-se/7751/Makefile @@ -2,4 +2,4 @@ # Makefile for the 7751 SolutionEngine specific parts of the kernel # -obj-y := setup.o io.o irq.o +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c deleted file mode 100644 index 6e75bd4459e5..000000000000 --- a/arch/sh/boards/mach-se/7751/io.c +++ /dev/null @@ -1,119 +0,0 @@ -/* - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Hitachi 7751 SolutionEngine. - * - * Initial version only to support LAN access; some - * placeholder code from io_se.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/io.h> -#include <mach-se/mach/se7751.h> -#include <asm/addrspace.h> - -static inline volatile u16 *port2adr(unsigned int port) -{ - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - maybebadio((unsigned long)port); - return (volatile __u16*)port; -} - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char sh7751se_inb(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned char *)port; - else - return (*port2adr(port)) & 0xff; -} - -unsigned char sh7751se_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else - v = (*port2adr(port)) & 0xff; - ctrl_delay(); - return v; -} - -unsigned short sh7751se_inw(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int sh7751se_inl(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -void sh7751se_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; -} - -void sh7751se_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void sh7751se_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (port >= 0x2000) - *port2adr(port) = value; - else - maybebadio(port); -} - -void sh7751se_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else - maybebadio(port); -} - -void sh7751se_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void sh7751se_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c index 50572512e3e8..9fbc51beb181 100644 --- a/arch/sh/boards/mach-se/7751/setup.c +++ b/arch/sh/boards/mach-se/7751/setup.c @@ -56,23 +56,5 @@ __initcall(se7751_devices_setup); static struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", .mv_nr_irqs = 72, - - .mv_inb = sh7751se_inb, - .mv_inw = sh7751se_inw, - .mv_inl = sh7751se_inl, - .mv_outb = sh7751se_outb, - .mv_outw = sh7751se_outw, - .mv_outl = sh7751se_outl, - - .mv_inb_p = sh7751se_inb_p, - .mv_inw_p = sh7751se_inw, - .mv_inl_p = sh7751se_inl, - .mv_outb_p = sh7751se_outb_p, - .mv_outw_p = sh7751se_outw, - .mv_outl_p = sh7751se_outl, - - .mv_insl = sh7751se_insl, - .mv_outsl = sh7751se_outsl, - .mv_init_irq = init_7751se_IRQ, }; diff --git a/arch/sh/boards/mach-snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile deleted file mode 100644 index d2d2f4b6a502..000000000000 --- a/arch/sh/boards/mach-snapgear/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the SnapGear specific parts of the kernel -# - -obj-y := setup.o io.o diff --git a/arch/sh/boards/mach-snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c deleted file mode 100644 index 476650e42dbc..000000000000 --- a/arch/sh/boards/mach-snapgear/io.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Copyright (C) 2002 David McCullough <davidm@snapgear.com> - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Hitachi 7751 SolutionEngine. - * - * Initial version only to support LAN access; some - * placeholder code from io_se.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <asm/io.h> -#include <asm/addrspace.h> - -#ifdef CONFIG_SH_SECUREEDGE5410 -unsigned short secureedge5410_ioport; -#endif - -static inline volatile __u16 *port2adr(unsigned int port) -{ - maybebadio((unsigned long)port); - return (volatile __u16*)port; -} - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char snapgear_inb(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned char *)port; - else - return (*port2adr(port)) & 0xff; -} - -unsigned char snapgear_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else - v = (*port2adr(port))&0xff; - ctrl_delay(); - return v; -} - -unsigned short snapgear_inw(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -unsigned int snapgear_inl(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (port >= 0x2000) - return *port2adr(port); - else - maybebadio(port); - return 0; -} - -void snapgear_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; -} - -void snapgear_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void snapgear_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (port >= 0x2000) - *port2adr(port) = value; - else - maybebadio(port); -} - -void snapgear_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else - maybebadio(port); -} - -void snapgear_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void snapgear_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile deleted file mode 100644 index 2cc6a23d9d39..000000000000 --- a/arch/sh/boards/mach-systemh/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Makefile for the SystemH specific parts of the kernel -# - -obj-y := setup.o irq.o io.o - -# XXX: This wants to be consolidated in arch/sh/drivers/pci, and more -# importantly, with the generic sh7751_pcic_init() code. For now, we'll -# just abuse the hell out of kbuild, because we can.. - -obj-$(CONFIG_PCI) += pci.o -pci-y := ../../se/7751/pci.o - diff --git a/arch/sh/boards/mach-systemh/io.c b/arch/sh/boards/mach-systemh/io.c deleted file mode 100644 index 15577ff1f715..000000000000 --- a/arch/sh/boards/mach-systemh/io.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/systemh/io.c - * - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Hitachi 7751 Systemh. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <mach/systemh7751.h> -#include <asm/addrspace.h> -#include <asm/io.h> - -#define ETHER_IOMAP(adr) (0xB3000000 + (adr)) /*map to 16bits access area - of smc lan chip*/ -static inline volatile __u16 * -port2adr(unsigned int port) -{ - if (port >= 0x2000) - return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); - maybebadio((unsigned long)port); - return (volatile __u16*)port; -} - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char sh7751systemh_inb(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned char *)port; - else if (port <= 0x3F1) - return *(volatile unsigned char *)ETHER_IOMAP(port); - else - return (*port2adr(port))&0xff; -} - -unsigned char sh7751systemh_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = *(volatile unsigned char *)port; - else if (port <= 0x3F1) - v = *(volatile unsigned char *)ETHER_IOMAP(port); - else - v = (*port2adr(port))&0xff; - ctrl_delay(); - return v; -} - -unsigned short sh7751systemh_inw(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned short *)port; - else if (port >= 0x2000) - return *port2adr(port); - else if (port <= 0x3F1) - return *(volatile unsigned int *)ETHER_IOMAP(port); - else - maybebadio(port); - return 0; -} - -unsigned int sh7751systemh_inl(unsigned long port) -{ - if (PXSEG(port)) - return *(volatile unsigned long *)port; - else if (port >= 0x2000) - return *port2adr(port); - else if (port <= 0x3F1) - return *(volatile unsigned int *)ETHER_IOMAP(port); - else - maybebadio(port); - return 0; -} - -void sh7751systemh_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (port <= 0x3F1) - *(volatile unsigned char *)ETHER_IOMAP(port) = value; - else - *(port2adr(port)) = value; -} - -void sh7751systemh_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned char *)port = value; - else if (port <= 0x3F1) - *(volatile unsigned char *)ETHER_IOMAP(port) = value; - else - *(port2adr(port)) = value; - ctrl_delay(); -} - -void sh7751systemh_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned short *)port = value; - else if (port >= 0x2000) - *port2adr(port) = value; - else if (port <= 0x3F1) - *(volatile unsigned short *)ETHER_IOMAP(port) = value; - else - maybebadio(port); -} - -void sh7751systemh_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - *(volatile unsigned long *)port = value; - else - maybebadio(port); -} - -void sh7751systemh_insb(unsigned long port, void *addr, unsigned long count) -{ - unsigned char *p = addr; - while (count--) *p++ = sh7751systemh_inb(port); -} - -void sh7751systemh_insw(unsigned long port, void *addr, unsigned long count) -{ - unsigned short *p = addr; - while (count--) *p++ = sh7751systemh_inw(port); -} - -void sh7751systemh_insl(unsigned long port, void *addr, unsigned long count) -{ - maybebadio(port); -} - -void sh7751systemh_outsb(unsigned long port, const void *addr, unsigned long count) -{ - unsigned char *p = (unsigned char*)addr; - while (count--) sh7751systemh_outb(*p++, port); -} - -void sh7751systemh_outsw(unsigned long port, const void *addr, unsigned long count) -{ - unsigned short *p = (unsigned short*)addr; - while (count--) sh7751systemh_outw(*p++, port); -} - -void sh7751systemh_outsl(unsigned long port, const void *addr, unsigned long count) -{ - maybebadio(port); -} diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c deleted file mode 100644 index e5ee13adeff4..000000000000 --- a/arch/sh/boards/mach-systemh/irq.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/systemh/irq.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SystemH Support. - * - * Modified for 7751 SystemH by - * Jonathan Short. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/io.h> - -#include <mach/systemh7751.h> -#include <asm/smc37c93x.h> - -/* address of external interrupt mask register - * address must be set prior to use these (maybe in init_XXX_irq()) - * XXX : is it better to use .config than specifying it in code? */ -static unsigned long *systemh_irq_mask_register = (unsigned long *)0xB3F10004; -static unsigned long *systemh_irq_request_register = (unsigned long *)0xB3F10000; - -static void disable_systemh_irq(struct irq_data *data) -{ - unsigned long val, mask = 0x01 << 1; - - /* Clear the "irq"th bit in the mask and set it in the request */ - val = __raw_readl((unsigned long)systemh_irq_mask_register); - val &= ~mask; - __raw_writel(val, (unsigned long)systemh_irq_mask_register); - - val = __raw_readl((unsigned long)systemh_irq_request_register); - val |= mask; - __raw_writel(val, (unsigned long)systemh_irq_request_register); -} - -static void enable_systemh_irq(struct irq_data *data) -{ - unsigned long val, mask = 0x01 << 1; - - /* Set "irq"th bit in the mask register */ - val = __raw_readl((unsigned long)systemh_irq_mask_register); - val |= mask; - __raw_writel(val, (unsigned long)systemh_irq_mask_register); -} - -static struct irq_chip systemh_irq_type = { - .name = "SystemH Register", - .irq_unmask = enable_systemh_irq, - .irq_mask = disable_systemh_irq, -}; - -void make_systemh_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - set_irq_chip_and_handler(irq, &systemh_irq_type, handle_level_irq); - disable_systemh_irq(irq_get_irq_data(irq)); -} diff --git a/arch/sh/boards/mach-systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c deleted file mode 100644 index 219fd800a43f..000000000000 --- a/arch/sh/boards/mach-systemh/setup.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/systemh/setup.c - * - * Copyright (C) 2000 Kazumoto Kojima - * Copyright (C) 2003 Paul Mundt - * - * Hitachi SystemH Support. - * - * Modified for 7751 SystemH by Jonathan Short. - * - * Rewritten for 2.6 by Paul Mundt. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <asm/machvec.h> -#include <mach/systemh7751.h> - -extern void make_systemh_irq(unsigned int irq); - -/* - * Initialize IRQ setting - */ -static void __init sh7751systemh_init_irq(void) -{ - make_systemh_irq(0xb); /* Ethernet interrupt */ -} - -static struct sh_machine_vector mv_7751systemh __initmv = { - .mv_name = "7751 SystemH", - .mv_nr_irqs = 72, - - .mv_inb = sh7751systemh_inb, - .mv_inw = sh7751systemh_inw, - .mv_inl = sh7751systemh_inl, - .mv_outb = sh7751systemh_outb, - .mv_outw = sh7751systemh_outw, - .mv_outl = sh7751systemh_outl, - - .mv_inb_p = sh7751systemh_inb_p, - .mv_inw_p = sh7751systemh_inw, - .mv_inl_p = sh7751systemh_inl, - .mv_outb_p = sh7751systemh_outb_p, - .mv_outw_p = sh7751systemh_outw, - .mv_outl_p = sh7751systemh_outl, - - .mv_insb = sh7751systemh_insb, - .mv_insw = sh7751systemh_insw, - .mv_insl = sh7751systemh_insl, - .mv_outsb = sh7751systemh_outsb, - .mv_outsw = sh7751systemh_outsw, - .mv_outsl = sh7751systemh_outsl, - - .mv_init_irq = sh7751systemh_init_irq, -}; diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/secureedge5410_defconfig index 7eae4e59d7f0..7eae4e59d7f0 100644 --- a/arch/sh/configs/snapgear_defconfig +++ b/arch/sh/configs/secureedge5410_defconfig diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig deleted file mode 100644 index b58dfc505efe..000000000000 --- a/arch/sh/configs/systemh_defconfig +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_HOTPLUG is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_CPU_SUBTYPE_SH7751R=y -CONFIG_MEMORY_START=0x0c000000 -CONFIG_MEMORY_SIZE=0x00400000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_SH_7751_SYSTEMH=y -CONFIG_PREEMPT=y -# CONFIG_STANDALONE is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=1024 -# CONFIG_INPUT is not set -# CONFIG_SERIO_SERPORT is not set -# CONFIG_VT is not set -CONFIG_HW_RANDOM=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h index 446b3831c214..3d1ae2bfaa6f 100644 --- a/arch/sh/include/asm/addrspace.h +++ b/arch/sh/include/asm/addrspace.h @@ -44,10 +44,10 @@ /* * These will never work in 32-bit, don't even bother. */ -#define P1SEGADDR(a) __futile_remapping_attempt -#define P2SEGADDR(a) __futile_remapping_attempt -#define P3SEGADDR(a) __futile_remapping_attempt -#define P4SEGADDR(a) __futile_remapping_attempt +#define P1SEGADDR(a) ({ (void)(a); BUG(); NULL; }) +#define P2SEGADDR(a) ({ (void)(a); BUG(); NULL; }) +#define P3SEGADDR(a) ({ (void)(a); BUG(); NULL; }) +#define P4SEGADDR(a) ({ (void)(a); BUG(); NULL; }) #endif #endif /* P1SEG */ diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h index a15f1058bbf4..083ea068e819 100644 --- a/arch/sh/include/asm/pgtable.h +++ b/arch/sh/include/asm/pgtable.h @@ -66,7 +66,6 @@ static inline unsigned long long neff_sign_extend(unsigned long val) #define PHYS_ADDR_MASK29 0x1fffffff #define PHYS_ADDR_MASK32 0xffffffff -#ifdef CONFIG_PMB static inline unsigned long phys_addr_mask(void) { /* Is the MMU in 29bit mode? */ @@ -75,17 +74,6 @@ static inline unsigned long phys_addr_mask(void) return PHYS_ADDR_MASK32; } -#elif defined(CONFIG_32BIT) -static inline unsigned long phys_addr_mask(void) -{ - return PHYS_ADDR_MASK32; -} -#else -static inline unsigned long phys_addr_mask(void) -{ - return PHYS_ADDR_MASK29; -} -#endif #define PTE_PHYS_MASK (phys_addr_mask() & PAGE_MASK) #define PTE_FLAGS_MASK (~(PTE_PHYS_MASK) << PAGE_SHIFT) diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h index 1f1af5afff03..10c8b1823a18 100644 --- a/arch/sh/include/asm/system.h +++ b/arch/sh/include/asm/system.h @@ -10,6 +10,7 @@ #include <linux/compiler.h> #include <linux/linkage.h> #include <asm/types.h> +#include <asm/uncached.h> #define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ @@ -137,9 +138,6 @@ extern unsigned int instruction_size(unsigned int insn); #define instruction_size(insn) (4) #endif -extern unsigned long cached_to_uncached; -extern unsigned long uncached_size; - void per_cpu_trap_init(void); void default_idle(void); void cpu_idle_wait(void); diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h index c941b2739405..a4ad1cd9bc4d 100644 --- a/arch/sh/include/asm/system_32.h +++ b/arch/sh/include/asm/system_32.h @@ -145,42 +145,6 @@ do { \ __restore_dsp(prev); \ } while (0) -/* - * Jump to uncached area. - * When handling TLB or caches, we need to do it from an uncached area. - */ -#define jump_to_uncached() \ -do { \ - unsigned long __dummy; \ - \ - __asm__ __volatile__( \ - "mova 1f, %0\n\t" \ - "add %1, %0\n\t" \ - "jmp @%0\n\t" \ - " nop\n\t" \ - ".balign 4\n" \ - "1:" \ - : "=&z" (__dummy) \ - : "r" (cached_to_uncached)); \ -} while (0) - -/* - * Back to cached area. - */ -#define back_to_cached() \ -do { \ - unsigned long __dummy; \ - ctrl_barrier(); \ - __asm__ __volatile__( \ - "mov.l 1f, %0\n\t" \ - "jmp @%0\n\t" \ - " nop\n\t" \ - ".balign 4\n" \ - "1: .long 2f\n" \ - "2:" \ - : "=&r" (__dummy)); \ -} while (0) - #ifdef CONFIG_CPU_HAS_SR_RB #define lookup_exception_vector() \ ({ \ diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h index 36338646dfc8..8593bc8d1a4e 100644 --- a/arch/sh/include/asm/system_64.h +++ b/arch/sh/include/asm/system_64.h @@ -34,9 +34,6 @@ do { \ &next->thread); \ } while (0) -#define jump_to_uncached() do { } while (0) -#define back_to_cached() do { } while (0) - #define __icbi(addr) __asm__ __volatile__ ( "icbi %0, 0\n\t" : : "r" (addr)) #define __ocbp(addr) __asm__ __volatile__ ( "ocbp %0, 0\n\t" : : "r" (addr)) #define __ocbi(addr) __asm__ __volatile__ ( "ocbi %0, 0\n\t" : : "r" (addr)) diff --git a/arch/sh/include/asm/uncached.h b/arch/sh/include/asm/uncached.h index e3419f96626a..6f8816b79cf1 100644 --- a/arch/sh/include/asm/uncached.h +++ b/arch/sh/include/asm/uncached.h @@ -4,15 +4,55 @@ #include <linux/bug.h> #ifdef CONFIG_UNCACHED_MAPPING +extern unsigned long cached_to_uncached; +extern unsigned long uncached_size; extern unsigned long uncached_start, uncached_end; extern int virt_addr_uncached(unsigned long kaddr); extern void uncached_init(void); extern void uncached_resize(unsigned long size); + +/* + * Jump to uncached area. + * When handling TLB or caches, we need to do it from an uncached area. + */ +#define jump_to_uncached() \ +do { \ + unsigned long __dummy; \ + \ + __asm__ __volatile__( \ + "mova 1f, %0\n\t" \ + "add %1, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1:" \ + : "=&z" (__dummy) \ + : "r" (cached_to_uncached)); \ +} while (0) + +/* + * Back to cached area. + */ +#define back_to_cached() \ +do { \ + unsigned long __dummy; \ + ctrl_barrier(); \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy)); \ +} while (0) #else #define virt_addr_uncached(kaddr) (0) #define uncached_init() do { } while (0) #define uncached_resize(size) BUG() +#define jump_to_uncached() do { } while (0) +#define back_to_cached() do { } while (0) #endif #endif /* __ASM_SH_UNCACHED_H */ diff --git a/arch/sh/include/mach-common/mach/edosk7705.h b/arch/sh/include/mach-common/mach/edosk7705.h deleted file mode 100644 index efc43b323466..000000000000 --- a/arch/sh/include/mach-common/mach/edosk7705.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_SH_EDOSK7705_H -#define __ASM_SH_EDOSK7705_H - -#define __IO_PREFIX sh_edosk7705 -#include <asm/io_generic.h> - -#endif /* __ASM_SH_EDOSK7705_H */ diff --git a/arch/sh/include/mach-common/mach/microdev.h b/arch/sh/include/mach-common/mach/microdev.h index 1aed15856e11..dcb05fa8c164 100644 --- a/arch/sh/include/mach-common/mach/microdev.h +++ b/arch/sh/include/mach-common/mach/microdev.h @@ -68,13 +68,4 @@ extern void microdev_print_fpga_intc_status(void); #define __IO_PREFIX microdev #include <asm/io_generic.h> -#if defined(CONFIG_PCI) -unsigned char microdev_pci_inb(unsigned long port); -unsigned short microdev_pci_inw(unsigned long port); -unsigned long microdev_pci_inl(unsigned long port); -void microdev_pci_outb(unsigned char data, unsigned long port); -void microdev_pci_outw(unsigned short data, unsigned long port); -void microdev_pci_outl(unsigned long data, unsigned long port); -#endif - #endif /* __ASM_SH_MICRODEV_H */ diff --git a/arch/sh/include/mach-common/mach/snapgear.h b/arch/sh/include/mach-common/mach/secureedge5410.h index 042d95f51c4d..3653b9a4bacc 100644 --- a/arch/sh/include/mach-common/mach/snapgear.h +++ b/arch/sh/include/mach-common/mach/secureedge5410.h @@ -12,30 +12,9 @@ #ifndef _ASM_SH_IO_SNAPGEAR_H #define _ASM_SH_IO_SNAPGEAR_H -#if defined(CONFIG_CPU_SH4) -/* - * The external interrupt lines, these take up ints 0 - 15 inclusive - * depending on the priority for the interrupt. In fact the priority - * is the interrupt :-) - */ - -#define IRL0_IRQ 2 -#define IRL0_PRIORITY 13 - -#define IRL1_IRQ 5 -#define IRL1_PRIORITY 10 - -#define IRL2_IRQ 8 -#define IRL2_PRIORITY 7 - -#define IRL3_IRQ 11 -#define IRL3_PRIORITY 4 -#endif - #define __IO_PREFIX snapgear #include <asm/io_generic.h> -#ifdef CONFIG_SH_SECUREEDGE5410 /* * We need to remember what was written to the ioport as some bits * are shared with other functions and you cannot read back what was @@ -66,6 +45,5 @@ extern unsigned short secureedge5410_ioport; ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) #define SECUREEDGE_READ_IOPORT() \ ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) -#endif #endif /* _ASM_SH_IO_SNAPGEAR_H */ diff --git a/arch/sh/include/mach-common/mach/systemh7751.h b/arch/sh/include/mach-common/mach/systemh7751.h deleted file mode 100644 index 4161122c84ef..000000000000 --- a/arch/sh/include/mach-common/mach/systemh7751.h +++ /dev/null @@ -1,71 +0,0 @@ -#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H -#define __ASM_SH_SYSTEMH_7751SYSTEMH_H - -/* - * linux/include/asm-sh/systemh/7751systemh.h - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Hitachi SystemH support - - * Modified for 7751 SystemH by - * Jonathan Short, 2002. - */ - -/* Box specific addresses. */ - -#define PA_ROM 0x00000000 /* EPROM */ -#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_FROM 0x01000000 /* EPROM */ -#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ -#define PA_EXT1 0x04000000 -#define PA_EXT1_SIZE 0x04000000 -#define PA_EXT2 0x08000000 -#define PA_EXT2_SIZE 0x04000000 -#define PA_SDRAM 0x0c000000 -#define PA_SDRAM_SIZE 0x04000000 - -#define PA_EXT4 0x12000000 -#define PA_EXT4_SIZE 0x02000000 -#define PA_EXT5 0x14000000 -#define PA_EXT5_SIZE 0x04000000 -#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ - -#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ -#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ -#define PA_LED 0xba000000 /* LED */ -#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ - -#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ -#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ -#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ -#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ -#define MRSHPC_MODE (PA_MRSHPC + 4) -#define MRSHPC_OPTION (PA_MRSHPC + 6) -#define MRSHPC_CSR (PA_MRSHPC + 8) -#define MRSHPC_ISR (PA_MRSHPC + 10) -#define MRSHPC_ICR (PA_MRSHPC + 12) -#define MRSHPC_CPWCR (PA_MRSHPC + 14) -#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) -#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) -#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) -#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) -#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) -#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) -#define MRSHPC_CDCR (PA_MRSHPC + 28) -#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) - -#define BCR_ILCRA (PA_BCR + 0) -#define BCR_ILCRB (PA_BCR + 2) -#define BCR_ILCRC (PA_BCR + 4) -#define BCR_ILCRD (PA_BCR + 6) -#define BCR_ILCRE (PA_BCR + 8) -#define BCR_ILCRF (PA_BCR + 10) -#define BCR_ILCRG (PA_BCR + 12) - -#define IRQ_79C973 13 - -#define __IO_PREFIX sh7751systemh -#include <asm/io_generic.h> - -#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */ diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index 2d9700c6b53a..0fe2e9329cb2 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -48,7 +48,7 @@ static struct clk r_clk = { * Default rate for the root input clock, reset this with clk_set_rate() * from the platform code. */ -struct clk extal_clk = { +static struct clk extal_clk = { .rate = 33333333, }; @@ -111,7 +111,7 @@ static struct clk div3_clk = { .parent = &pll_clk, }; -struct clk *main_clks[] = { +static struct clk *main_clks[] = { &r_clk, &extal_clk, &fll_clk, @@ -156,7 +156,7 @@ struct clk div4_clks[DIV4_NR] = { enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR }; -struct clk div6_clks[DIV6_NR] = { +static struct clk div6_clks[DIV6_NR] = { [DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0), [DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0), [DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0), diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 09370392aff1..c3e61b366493 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -79,7 +79,7 @@ config 29BIT config 32BIT bool - default y if CPU_SH5 + default y if CPU_SH5 || !MMU config PMB bool "Support 32-bit physical addressing through PMB" diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index 038793286990..40733a952402 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -79,21 +79,20 @@ void dma_generic_free_coherent(struct device *dev, size_t size, void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) { -#if defined(CONFIG_CPU_SH5) || defined(CONFIG_PMB) - void *p1addr = vaddr; -#else - void *p1addr = (void*) P1SEGADDR((unsigned long)vaddr); -#endif + void *addr; + + addr = __in_29bit_mode() ? + (void *)P1SEGADDR((unsigned long)vaddr) : vaddr; switch (direction) { case DMA_FROM_DEVICE: /* invalidate only */ - __flush_invalidate_region(p1addr, size); + __flush_invalidate_region(addr, size); break; case DMA_TO_DEVICE: /* writeback only */ - __flush_wback_region(p1addr, size); + __flush_wback_region(addr, size); break; case DMA_BIDIRECTIONAL: /* writeback and invalidate */ - __flush_purge_region(p1addr, size); + __flush_purge_region(addr, size); break; default: BUG(); diff --git a/arch/sh/mm/uncached.c b/arch/sh/mm/uncached.c index 8a4eca551fc0..a7767da815e9 100644 --- a/arch/sh/mm/uncached.c +++ b/arch/sh/mm/uncached.c @@ -28,7 +28,7 @@ EXPORT_SYMBOL(virt_addr_uncached); void __init uncached_init(void) { -#ifdef CONFIG_29BIT +#if defined(CONFIG_29BIT) || !defined(CONFIG_MMU) uncached_start = P2SEG; #else uncached_start = memory_end; diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 9f56eb978024..0e68465e7b50 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -26,7 +26,6 @@ HD64461 HD64461 7724SE SH_7724_SOLUTION_ENGINE 7751SE SH_7751_SOLUTION_ENGINE 7780SE SH_7780_SOLUTION_ENGINE -7751SYSTEMH SH_7751_SYSTEMH HP6XX SH_HP6XX DREAMCAST SH_DREAMCAST SNAPGEAR SH_SECUREEDGE5410 diff --git a/arch/tile/include/asm/highmem.h b/arch/tile/include/asm/highmem.h index e0f7ee186721..b2a6c5de79ab 100644 --- a/arch/tile/include/asm/highmem.h +++ b/arch/tile/include/asm/highmem.h @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/threads.h> -#include <asm/kmap_types.h> #include <asm/tlbflush.h> #include <asm/homecache.h> diff --git a/arch/tile/include/asm/kmap_types.h b/arch/tile/include/asm/kmap_types.h index 1480106d1c05..3d0f20246260 100644 --- a/arch/tile/include/asm/kmap_types.h +++ b/arch/tile/include/asm/kmap_types.h @@ -16,28 +16,42 @@ #define _ASM_TILE_KMAP_TYPES_H /* - * In TILE Linux each set of four of these uses another 16MB chunk of - * address space, given 64 tiles and 64KB pages, so we only enable - * ones that are required by the kernel configuration. + * In 32-bit TILE Linux we have to balance the desire to have a lot of + * nested atomic mappings with the fact that large page sizes and many + * processors chew up address space quickly. In a typical + * 64-processor, 64KB-page layout build, making KM_TYPE_NR one larger + * adds 4MB of required address-space. For now we leave KM_TYPE_NR + * set to depth 8. */ enum km_type { + KM_TYPE_NR = 8 +}; + +/* + * We provide dummy definitions of all the stray values that used to be + * required for kmap_atomic() and no longer are. + */ +enum { KM_BOUNCE_READ, KM_SKB_SUNRPC_DATA, KM_SKB_DATA_SOFTIRQ, KM_USER0, KM_USER1, KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, KM_IRQ0, KM_IRQ1, KM_SOFTIRQ0, KM_SOFTIRQ1, - KM_MEMCPY0, - KM_MEMCPY1, -#if defined(CONFIG_HIGHPTE) - KM_PTE0, - KM_PTE1, -#endif - KM_TYPE_NR + KM_SYNC_ICACHE, + KM_SYNC_DCACHE, + KM_UML_USERCOPY, + KM_IRQ_PTE, + KM_NMI, + KM_NMI_PTE, + KM_KDB }; #endif /* _ASM_TILE_KMAP_TYPES_H */ diff --git a/arch/tile/include/asm/pgtable.h b/arch/tile/include/asm/pgtable.h index dc4ccdd855bc..a6604e9485da 100644 --- a/arch/tile/include/asm/pgtable.h +++ b/arch/tile/include/asm/pgtable.h @@ -344,10 +344,8 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) #define pgd_offset_k(address) pgd_offset(&init_mm, address) #if defined(CONFIG_HIGHPTE) -extern pte_t *_pte_offset_map(pmd_t *, unsigned long address, enum km_type); -#define pte_offset_map(dir, address) \ - _pte_offset_map(dir, address, KM_PTE0) -#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0) +extern pte_t *pte_offset_map(pmd_t *, unsigned long address); +#define pte_unmap(pte) kunmap_atomic(pte) #else #define pte_offset_map(dir, address) pte_offset_kernel(dir, address) #define pte_unmap(pte) do { } while (0) diff --git a/arch/tile/include/asm/stat.h b/arch/tile/include/asm/stat.h index 3dc90fa92c70..b16e5db8f0e7 100644 --- a/arch/tile/include/asm/stat.h +++ b/arch/tile/include/asm/stat.h @@ -1 +1,4 @@ +#ifdef CONFIG_COMPAT +#define __ARCH_WANT_STAT64 /* Used for compat_sys_stat64() etc. */ +#endif #include <asm-generic/stat.h> diff --git a/arch/tile/include/asm/unistd.h b/arch/tile/include/asm/unistd.h index f2e3ff485333..b35c2db71199 100644 --- a/arch/tile/include/asm/unistd.h +++ b/arch/tile/include/asm/unistd.h @@ -41,6 +41,7 @@ __SYSCALL(__NR_cmpxchg_badaddr, sys_cmpxchg_badaddr) #ifdef CONFIG_COMPAT #define __ARCH_WANT_SYS_LLSEEK #endif +#define __ARCH_WANT_SYS_NEWFSTATAT #endif #endif /* _ASM_TILE_UNISTD_H */ diff --git a/arch/tile/kernel/compat.c b/arch/tile/kernel/compat.c index 77739cdd9462..67617a05e602 100644 --- a/arch/tile/kernel/compat.c +++ b/arch/tile/kernel/compat.c @@ -148,11 +148,11 @@ long tile_compat_sys_msgrcv(int msqid, #define compat_sys_readahead sys32_readahead #define compat_sys_sync_file_range compat_sys_sync_file_range2 -/* The native 64-bit "struct stat" matches the 32-bit "struct stat64". */ -#define compat_sys_stat64 sys_newstat -#define compat_sys_lstat64 sys_newlstat -#define compat_sys_fstat64 sys_newfstat -#define compat_sys_fstatat64 sys_newfstatat +/* We leverage the "struct stat64" type for 32-bit time_t/nsec. */ +#define compat_sys_stat64 sys_stat64 +#define compat_sys_lstat64 sys_lstat64 +#define compat_sys_fstat64 sys_fstat64 +#define compat_sys_fstatat64 sys_fstatat64 /* The native sys_ptrace dynamically handles compat binaries. */ #define compat_sys_ptrace sys_ptrace diff --git a/arch/tile/kernel/early_printk.c b/arch/tile/kernel/early_printk.c index 2c54fd43a8a0..493a0e66d916 100644 --- a/arch/tile/kernel/early_printk.c +++ b/arch/tile/kernel/early_printk.c @@ -54,7 +54,7 @@ void early_printk(const char *fmt, ...) void early_panic(const char *fmt, ...) { va_list ap; - raw_local_irq_disable_all(); + arch_local_irq_disable_all(); va_start(ap, fmt); early_printk("Kernel panic - not syncing: "); early_vprintk(fmt, ap); diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c index 1e54a7843410..e910530436e6 100644 --- a/arch/tile/kernel/hardwall.c +++ b/arch/tile/kernel/hardwall.c @@ -151,12 +151,12 @@ enum direction_protect { static void enable_firewall_interrupts(void) { - raw_local_irq_unmask_now(INT_UDN_FIREWALL); + arch_local_irq_unmask_now(INT_UDN_FIREWALL); } static void disable_firewall_interrupts(void) { - raw_local_irq_mask_now(INT_UDN_FIREWALL); + arch_local_irq_mask_now(INT_UDN_FIREWALL); } /* Set up hardwall on this cpu based on the passed hardwall_info. */ @@ -768,13 +768,13 @@ static int hardwall_release(struct inode *inode, struct file *file) } static const struct file_operations dev_hardwall_fops = { + .open = nonseekable_open, .unlocked_ioctl = hardwall_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = hardwall_compat_ioctl, #endif .flush = hardwall_flush, .release = hardwall_release, - .llseek = noop_llseek, }; static struct cdev hardwall_dev; diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index e63917687e99..128805ef8f2c 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -26,7 +26,7 @@ #define IS_HW_CLEARED 1 /* - * The set of interrupts we enable for raw_local_irq_enable(). + * The set of interrupts we enable for arch_local_irq_enable(). * This is initialized to have just a single interrupt that the kernel * doesn't actually use as a sentinel. During kernel init, * interrupts are added as the kernel gets prepared to support them. @@ -225,7 +225,7 @@ void __cpuinit setup_irq_regs(void) /* Enable interrupt delivery. */ unmask_irqs(~0UL); #if CHIP_HAS_IPI() - raw_local_irq_unmask(INT_IPI_K); + arch_local_irq_unmask(INT_IPI_K); #endif } diff --git a/arch/tile/kernel/machine_kexec.c b/arch/tile/kernel/machine_kexec.c index ba7a265d6179..0d8b9e933487 100644 --- a/arch/tile/kernel/machine_kexec.c +++ b/arch/tile/kernel/machine_kexec.c @@ -182,13 +182,13 @@ static void kexec_find_and_set_command_line(struct kimage *image) if ((entry & IND_SOURCE)) { void *va = - kmap_atomic_pfn(entry >> PAGE_SHIFT, KM_USER0); + kmap_atomic_pfn(entry >> PAGE_SHIFT); r = kexec_bn2cl(va); if (r) { command_line = r; break; } - kunmap_atomic(va, KM_USER0); + kunmap_atomic(va); } } @@ -198,7 +198,7 @@ static void kexec_find_and_set_command_line(struct kimage *image) hverr = hv_set_command_line( (HV_VirtAddr) command_line, strlen(command_line)); - kunmap_atomic(command_line, KM_USER0); + kunmap_atomic(command_line); } else { pr_info("%s: no command line found; making empty\n", __func__); diff --git a/arch/tile/kernel/messaging.c b/arch/tile/kernel/messaging.c index 997e3933f726..0858ee6b520f 100644 --- a/arch/tile/kernel/messaging.c +++ b/arch/tile/kernel/messaging.c @@ -34,7 +34,7 @@ void __cpuinit init_messaging(void) panic("hv_register_message_state: error %d", rc); /* Make sure downcall interrupts will be enabled. */ - raw_local_irq_unmask(INT_INTCTRL_K); + arch_local_irq_unmask(INT_INTCTRL_K); } void hv_message_intr(struct pt_regs *regs, int intnum) diff --git a/arch/tile/kernel/ptrace.c b/arch/tile/kernel/ptrace.c index 9cd29884c09f..e92e40527d6d 100644 --- a/arch/tile/kernel/ptrace.c +++ b/arch/tile/kernel/ptrace.c @@ -50,10 +50,10 @@ long arch_ptrace(struct task_struct *child, long request, { unsigned long __user *datap = (long __user __force *)data; unsigned long tmp; - int i; long ret = -EIO; - unsigned long *childregs; char *childreg; + struct pt_regs copyregs; + int ex1_offset; switch (request) { @@ -80,6 +80,16 @@ long arch_ptrace(struct task_struct *child, long request, if (addr >= PTREGS_SIZE) break; childreg = (char *)task_pt_regs(child) + addr; + + /* Guard against overwrites of the privilege level. */ + ex1_offset = PTREGS_OFFSET_EX1; +#if defined(CONFIG_COMPAT) && defined(__BIG_ENDIAN) + if (is_compat_task()) /* point at low word */ + ex1_offset += sizeof(compat_long_t); +#endif + if (addr == ex1_offset) + data = PL_ICS_EX1(USER_PL, EX1_ICS(data)); + #ifdef CONFIG_COMPAT if (is_compat_task()) { if (addr & (sizeof(compat_long_t)-1)) @@ -96,26 +106,19 @@ long arch_ptrace(struct task_struct *child, long request, break; case PTRACE_GETREGS: /* Get all registers from the child. */ - if (!access_ok(VERIFY_WRITE, datap, PTREGS_SIZE)) - break; - childregs = (long *)task_pt_regs(child); - for (i = 0; i < sizeof(struct pt_regs)/sizeof(unsigned long); - ++i) { - ret = __put_user(childregs[i], &datap[i]); - if (ret != 0) - break; + if (copy_to_user(datap, task_pt_regs(child), + sizeof(struct pt_regs)) == 0) { + ret = 0; } break; case PTRACE_SETREGS: /* Set all registers in the child. */ - if (!access_ok(VERIFY_READ, datap, PTREGS_SIZE)) - break; - childregs = (long *)task_pt_regs(child); - for (i = 0; i < sizeof(struct pt_regs)/sizeof(unsigned long); - ++i) { - ret = __get_user(childregs[i], &datap[i]); - if (ret != 0) - break; + if (copy_from_user(©regs, datap, + sizeof(struct pt_regs)) == 0) { + copyregs.ex1 = + PL_ICS_EX1(USER_PL, EX1_ICS(copyregs.ex1)); + *task_pt_regs(child) = copyregs; + ret = 0; } break; diff --git a/arch/tile/kernel/reboot.c b/arch/tile/kernel/reboot.c index acd86d20beba..baa3d905fee2 100644 --- a/arch/tile/kernel/reboot.c +++ b/arch/tile/kernel/reboot.c @@ -27,7 +27,7 @@ void machine_halt(void) { warn_early_printk(); - raw_local_irq_disable_all(); + arch_local_irq_disable_all(); smp_send_stop(); hv_halt(); } @@ -35,14 +35,14 @@ void machine_halt(void) void machine_power_off(void) { warn_early_printk(); - raw_local_irq_disable_all(); + arch_local_irq_disable_all(); smp_send_stop(); hv_power_off(); } void machine_restart(char *cmd) { - raw_local_irq_disable_all(); + arch_local_irq_disable_all(); smp_send_stop(); hv_restart((HV_VirtAddr) "vmlinux", (HV_VirtAddr) cmd); } diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c index ae51cad12da0..fb0b3cbeae14 100644 --- a/arch/tile/kernel/setup.c +++ b/arch/tile/kernel/setup.c @@ -868,14 +868,14 @@ void __cpuinit setup_cpu(int boot) /* Allow asynchronous TLB interrupts. */ #if CHIP_HAS_TILE_DMA() - raw_local_irq_unmask(INT_DMATLB_MISS); - raw_local_irq_unmask(INT_DMATLB_ACCESS); + arch_local_irq_unmask(INT_DMATLB_MISS); + arch_local_irq_unmask(INT_DMATLB_ACCESS); #endif #if CHIP_HAS_SN_PROC() - raw_local_irq_unmask(INT_SNITLB_MISS); + arch_local_irq_unmask(INT_SNITLB_MISS); #endif #ifdef __tilegx__ - raw_local_irq_unmask(INT_SINGLE_STEP_K); + arch_local_irq_unmask(INT_SINGLE_STEP_K); #endif /* diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c index fb28e85ae3ae..687719d4abd1 100644 --- a/arch/tile/kernel/signal.c +++ b/arch/tile/kernel/signal.c @@ -71,6 +71,9 @@ int restore_sigcontext(struct pt_regs *regs, for (i = 0; i < sizeof(struct pt_regs)/sizeof(long); ++i) err |= __get_user(regs->regs[i], &sc->gregs[i]); + /* Ensure that the PL is always set to USER_PL. */ + regs->ex1 = PL_ICS_EX1(USER_PL, EX1_ICS(regs->ex1)); + regs->faultnum = INT_SWINT_1_SIGRETURN; err |= __get_user(*pr0, &sc->gregs[0]); @@ -330,7 +333,7 @@ void do_signal(struct pt_regs *regs) current_thread_info()->status &= ~TS_RESTORE_SIGMASK; } - return; + goto done; } /* Did we come from a system call? */ @@ -358,4 +361,8 @@ void do_signal(struct pt_regs *regs) current_thread_info()->status &= ~TS_RESTORE_SIGMASK; sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); } + +done: + /* Avoid double syscall restart if there are nested signals. */ + regs->faultnum = INT_SWINT_1_SIGRETURN; } diff --git a/arch/tile/kernel/smp.c b/arch/tile/kernel/smp.c index 75255d90aff3..9575b37a8b75 100644 --- a/arch/tile/kernel/smp.c +++ b/arch/tile/kernel/smp.c @@ -115,7 +115,7 @@ static void smp_start_cpu_interrupt(void) static void smp_stop_cpu_interrupt(void) { set_cpu_online(smp_processor_id(), 0); - raw_local_irq_disable_all(); + arch_local_irq_disable_all(); for (;;) asm("nap"); } diff --git a/arch/tile/kernel/time.c b/arch/tile/kernel/time.c index 6bed820e1421..f2e156e44692 100644 --- a/arch/tile/kernel/time.c +++ b/arch/tile/kernel/time.c @@ -132,7 +132,7 @@ static int tile_timer_set_next_event(unsigned long ticks, { BUG_ON(ticks > MAX_TICK); __insn_mtspr(SPR_TILE_TIMER_CONTROL, ticks); - raw_local_irq_unmask_now(INT_TILE_TIMER); + arch_local_irq_unmask_now(INT_TILE_TIMER); return 0; } @@ -143,7 +143,7 @@ static int tile_timer_set_next_event(unsigned long ticks, static void tile_timer_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - raw_local_irq_mask_now(INT_TILE_TIMER); + arch_local_irq_mask_now(INT_TILE_TIMER); } /* @@ -172,7 +172,7 @@ void __cpuinit setup_tile_timer(void) evt->cpumask = cpumask_of(smp_processor_id()); /* Start out with timer not firing. */ - raw_local_irq_mask_now(INT_TILE_TIMER); + arch_local_irq_mask_now(INT_TILE_TIMER); /* Register tile timer. */ clockevents_register_device(evt); @@ -188,7 +188,7 @@ void do_timer_interrupt(struct pt_regs *regs, int fault_num) * Mask the timer interrupt here, since we are a oneshot timer * and there are now by definition no events pending. */ - raw_local_irq_mask(INT_TILE_TIMER); + arch_local_irq_mask(INT_TILE_TIMER); /* Track time spent here in an interrupt context */ irq_enter(); diff --git a/arch/tile/lib/memcpy_tile64.c b/arch/tile/lib/memcpy_tile64.c index dfedea7b266b..f7d4a6ad61e8 100644 --- a/arch/tile/lib/memcpy_tile64.c +++ b/arch/tile/lib/memcpy_tile64.c @@ -54,7 +54,7 @@ typedef unsigned long (*memcpy_t)(void *, const void *, unsigned long); * we must run with interrupts disabled to avoid the risk of some * other code seeing the incoherent data in our cache. (Recall that * our cache is indexed by PA, so even if the other code doesn't use - * our KM_MEMCPY virtual addresses, they'll still hit in cache using + * our kmap_atomic virtual addresses, they'll still hit in cache using * the normal VAs that aren't supposed to hit in cache.) */ static void memcpy_multicache(void *dest, const void *source, @@ -64,6 +64,7 @@ static void memcpy_multicache(void *dest, const void *source, unsigned long flags, newsrc, newdst; pmd_t *pmdp; pte_t *ptep; + int type0, type1; int cpu = get_cpu(); /* @@ -77,7 +78,8 @@ static void memcpy_multicache(void *dest, const void *source, sim_allow_multiple_caching(1); /* Set up the new dest mapping */ - idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + KM_MEMCPY0; + type0 = kmap_atomic_idx_push(); + idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + type0; newdst = __fix_to_virt(idx) + ((unsigned long)dest & (PAGE_SIZE-1)); pmdp = pmd_offset(pud_offset(pgd_offset_k(newdst), newdst), newdst); ptep = pte_offset_kernel(pmdp, newdst); @@ -87,7 +89,8 @@ static void memcpy_multicache(void *dest, const void *source, } /* Set up the new source mapping */ - idx += (KM_MEMCPY0 - KM_MEMCPY1); + type1 = kmap_atomic_idx_push(); + idx += (type0 - type1); src_pte = hv_pte_set_nc(src_pte); src_pte = hv_pte_clear_writable(src_pte); /* be paranoid */ newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1)); @@ -119,6 +122,8 @@ static void memcpy_multicache(void *dest, const void *source, * We're done: notify the simulator that all is back to normal, * and re-enable interrupts and pre-emption. */ + kmap_atomic_idx_pop(); + kmap_atomic_idx_pop(); sim_allow_multiple_caching(0); local_irq_restore(flags); put_cpu(); diff --git a/arch/tile/mm/highmem.c b/arch/tile/mm/highmem.c index abb57331cf6e..31dbbd9afe47 100644 --- a/arch/tile/mm/highmem.c +++ b/arch/tile/mm/highmem.c @@ -227,7 +227,7 @@ EXPORT_SYMBOL(kmap_atomic_prot); void *__kmap_atomic(struct page *page) { /* PAGE_NONE is a magic value that tells us to check immutability. */ - return kmap_atomic_prot(page, type, PAGE_NONE); + return kmap_atomic_prot(page, PAGE_NONE); } EXPORT_SYMBOL(__kmap_atomic); diff --git a/arch/tile/mm/init.c b/arch/tile/mm/init.c index 78e1982cb6c9..0b9ce69b0ee5 100644 --- a/arch/tile/mm/init.c +++ b/arch/tile/mm/init.c @@ -988,8 +988,12 @@ static long __write_once initfree = 1; /* Select whether to free (1) or mark unusable (0) the __init pages. */ static int __init set_initfree(char *str) { - strict_strtol(str, 0, &initfree); - pr_info("initfree: %s free init pages\n", initfree ? "will" : "won't"); + long val; + if (strict_strtol(str, 0, &val)) { + initfree = val; + pr_info("initfree: %s free init pages\n", + initfree ? "will" : "won't"); + } return 1; } __setup("initfree=", set_initfree); diff --git a/arch/tile/mm/pgtable.c b/arch/tile/mm/pgtable.c index 335c24621c41..1f5430c53d0d 100644 --- a/arch/tile/mm/pgtable.c +++ b/arch/tile/mm/pgtable.c @@ -134,9 +134,9 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t flags) } #if defined(CONFIG_HIGHPTE) -pte_t *_pte_offset_map(pmd_t *dir, unsigned long address, enum km_type type) +pte_t *_pte_offset_map(pmd_t *dir, unsigned long address) { - pte_t *pte = kmap_atomic(pmd_page(*dir), type) + + pte_t *pte = kmap_atomic(pmd_page(*dir)) + (pmd_ptfn(*dir) << HV_LOG2_PAGE_TABLE_ALIGN) & ~PAGE_MASK; return &pte[pte_index(address)]; } diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h index 2cd899f75a3c..b7c5bab9bd77 100644 --- a/arch/um/include/asm/ptrace-generic.h +++ b/arch/um/include/asm/ptrace-generic.h @@ -38,8 +38,8 @@ struct pt_regs { struct task_struct; -extern long subarch_ptrace(struct task_struct *child, long request, long addr, - long data); +extern long subarch_ptrace(struct task_struct *child, long request, + unsigned long addr, unsigned long data); extern unsigned long getreg(struct task_struct *child, int regno); extern int putreg(struct task_struct *child, int regno, unsigned long value); extern int get_fpregs(struct user_i387_struct __user *buf, diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index a5e33f29bbeb..701b672c1122 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -122,7 +122,7 @@ long arch_ptrace(struct task_struct *child, long request, break; case PTRACE_SET_THREAD_AREA: - ret = ptrace_set_thread_area(child, addr, datavp); + ret = ptrace_set_thread_area(child, addr, vp); break; case PTRACE_FAULTINFO: { diff --git a/arch/x86/kernel/cpu/perf_event_amd.c b/arch/x86/kernel/cpu/perf_event_amd.c index 46d58448c3af..e421b8cd6944 100644 --- a/arch/x86/kernel/cpu/perf_event_amd.c +++ b/arch/x86/kernel/cpu/perf_event_amd.c @@ -280,11 +280,11 @@ static struct amd_nb *amd_alloc_nb(int cpu, int nb_id) struct amd_nb *nb; int i; - nb = kmalloc(sizeof(struct amd_nb), GFP_KERNEL); + nb = kmalloc_node(sizeof(struct amd_nb), GFP_KERNEL | __GFP_ZERO, + cpu_to_node(cpu)); if (!nb) return NULL; - memset(nb, 0, sizeof(*nb)); nb->nb_id = nb_id; /* diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 908ea5464a51..fb8b376bf28c 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -720,7 +720,7 @@ static void rmap_remove(struct kvm *kvm, u64 *spte) } } -static void set_spte_track_bits(u64 *sptep, u64 new_spte) +static int set_spte_track_bits(u64 *sptep, u64 new_spte) { pfn_t pfn; u64 old_spte = *sptep; @@ -731,19 +731,20 @@ static void set_spte_track_bits(u64 *sptep, u64 new_spte) old_spte = __xchg_spte(sptep, new_spte); if (!is_rmap_spte(old_spte)) - return; + return 0; pfn = spte_to_pfn(old_spte); if (!shadow_accessed_mask || old_spte & shadow_accessed_mask) kvm_set_pfn_accessed(pfn); if (!shadow_dirty_mask || (old_spte & shadow_dirty_mask)) kvm_set_pfn_dirty(pfn); + return 1; } static void drop_spte(struct kvm *kvm, u64 *sptep, u64 new_spte) { - set_spte_track_bits(sptep, new_spte); - rmap_remove(kvm, sptep); + if (set_spte_track_bits(sptep, new_spte)) + rmap_remove(kvm, sptep); } static u64 *rmap_next(struct kvm *kvm, unsigned long *rmapp, u64 *spte) diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 2288ad829b32..cdac9e592aa5 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2560,6 +2560,7 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu, !kvm_exception_is_soft(vcpu->arch.exception.nr); events->exception.nr = vcpu->arch.exception.nr; events->exception.has_error_code = vcpu->arch.exception.has_error_code; + events->exception.pad = 0; events->exception.error_code = vcpu->arch.exception.error_code; events->interrupt.injected = @@ -2573,12 +2574,14 @@ static void kvm_vcpu_ioctl_x86_get_vcpu_events(struct kvm_vcpu *vcpu, events->nmi.injected = vcpu->arch.nmi_injected; events->nmi.pending = vcpu->arch.nmi_pending; events->nmi.masked = kvm_x86_ops->get_nmi_mask(vcpu); + events->nmi.pad = 0; events->sipi_vector = vcpu->arch.sipi_vector; events->flags = (KVM_VCPUEVENT_VALID_NMI_PENDING | KVM_VCPUEVENT_VALID_SIPI_VECTOR | KVM_VCPUEVENT_VALID_SHADOW); + memset(&events->reserved, 0, sizeof(events->reserved)); } static int kvm_vcpu_ioctl_x86_set_vcpu_events(struct kvm_vcpu *vcpu, @@ -2623,6 +2626,7 @@ static void kvm_vcpu_ioctl_x86_get_debugregs(struct kvm_vcpu *vcpu, dbgregs->dr6 = vcpu->arch.dr6; dbgregs->dr7 = vcpu->arch.dr7; dbgregs->flags = 0; + memset(&dbgregs->reserved, 0, sizeof(dbgregs->reserved)); } static int kvm_vcpu_ioctl_x86_set_debugregs(struct kvm_vcpu *vcpu, @@ -3106,6 +3110,7 @@ static int kvm_vm_ioctl_get_pit2(struct kvm *kvm, struct kvm_pit_state2 *ps) sizeof(ps->channels)); ps->flags = kvm->arch.vpit->pit_state.flags; mutex_unlock(&kvm->arch.vpit->pit_state.lock); + memset(&ps->reserved, 0, sizeof(ps->reserved)); return r; } @@ -3169,10 +3174,6 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, struct kvm_memslots *slots, *old_slots; unsigned long *dirty_bitmap; - spin_lock(&kvm->mmu_lock); - kvm_mmu_slot_remove_write_access(kvm, log->slot); - spin_unlock(&kvm->mmu_lock); - r = -ENOMEM; dirty_bitmap = vmalloc(n); if (!dirty_bitmap) @@ -3194,6 +3195,10 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm, dirty_bitmap = old_slots->memslots[log->slot].dirty_bitmap; kfree(old_slots); + spin_lock(&kvm->mmu_lock); + kvm_mmu_slot_remove_write_access(kvm, log->slot); + spin_unlock(&kvm->mmu_lock); + r = -EFAULT; if (copy_to_user(log->dirty_bitmap, dirty_bitmap, n)) { vfree(dirty_bitmap); @@ -3486,6 +3491,7 @@ long kvm_arch_vm_ioctl(struct file *filp, user_ns.clock = kvm->arch.kvmclock_offset + now_ns; local_irq_enable(); user_ns.flags = 0; + memset(&user_ns.pad, 0, sizeof(user_ns.pad)); r = -EFAULT; if (copy_to_user(argp, &user_ns, sizeof(user_ns))) @@ -3972,8 +3978,10 @@ int kvm_emulate_wbinvd(struct kvm_vcpu *vcpu) return X86EMUL_CONTINUE; if (kvm_x86_ops->has_wbinvd_exit()) { + preempt_disable(); smp_call_function_many(vcpu->arch.wbinvd_dirty_mask, wbinvd_ipi, NULL, 1); + preempt_enable(); cpumask_clear(vcpu->arch.wbinvd_dirty_mask); } wbinvd(); |