summaryrefslogtreecommitdiff
path: root/arch/x86/platform
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/platform')
-rw-r--r--arch/x86/platform/Makefile2
-rw-r--r--arch/x86/platform/ce4100/Makefile1
-rw-r--r--arch/x86/platform/ce4100/ce4100.c132
-rw-r--r--arch/x86/platform/iris/Makefile1
-rw-r--r--arch/x86/platform/iris/iris.c91
-rw-r--r--arch/x86/platform/mrst/Makefile2
-rw-r--r--arch/x86/platform/mrst/early_printk_mrst.c319
-rw-r--r--arch/x86/platform/mrst/mrst.c576
-rw-r--r--arch/x86/platform/mrst/vrtc.c165
-rw-r--r--arch/x86/platform/sfi/sfi.c17
-rw-r--r--arch/x86/platform/uv/tlb_uv.c22
-rw-r--r--arch/x86/platform/visws/visws_quirks.c2
12 files changed, 1272 insertions, 58 deletions
diff --git a/arch/x86/platform/Makefile b/arch/x86/platform/Makefile
index 7bf70b812fa2..021eee91c056 100644
--- a/arch/x86/platform/Makefile
+++ b/arch/x86/platform/Makefile
@@ -1,5 +1,7 @@
# Platform specific code goes here
+obj-y += ce4100/
obj-y += efi/
+obj-y += iris/
obj-y += mrst/
obj-y += olpc/
obj-y += scx200/
diff --git a/arch/x86/platform/ce4100/Makefile b/arch/x86/platform/ce4100/Makefile
new file mode 100644
index 000000000000..91fc92971d94
--- /dev/null
+++ b/arch/x86/platform/ce4100/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_X86_INTEL_CE) += ce4100.o
diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c
new file mode 100644
index 000000000000..d2c0d51a7178
--- /dev/null
+++ b/arch/x86/platform/ce4100/ce4100.c
@@ -0,0 +1,132 @@
+/*
+ * Intel CE4100 platform specific setup code
+ *
+ * (C) Copyright 2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/serial_reg.h>
+#include <linux/serial_8250.h>
+
+#include <asm/setup.h>
+#include <asm/io.h>
+
+static int ce4100_i8042_detect(void)
+{
+ return 0;
+}
+
+static void __init sdv_find_smp_config(void)
+{
+}
+
+#ifdef CONFIG_SERIAL_8250
+
+
+static unsigned int mem_serial_in(struct uart_port *p, int offset)
+{
+ offset = offset << p->regshift;
+ return readl(p->membase + offset);
+}
+
+/*
+ * The UART Tx interrupts are not set under some conditions and therefore serial
+ * transmission hangs. This is a silicon issue and has not been root caused. The
+ * workaround for this silicon issue checks UART_LSR_THRE bit and UART_LSR_TEMT
+ * bit of LSR register in interrupt handler to see whether at least one of these
+ * two bits is set, if so then process the transmit request. If this workaround
+ * is not applied, then the serial transmission may hang. This workaround is for
+ * errata number 9 in Errata - B step.
+*/
+
+static unsigned int ce4100_mem_serial_in(struct uart_port *p, int offset)
+{
+ unsigned int ret, ier, lsr;
+
+ if (offset == UART_IIR) {
+ offset = offset << p->regshift;
+ ret = readl(p->membase + offset);
+ if (ret & UART_IIR_NO_INT) {
+ /* see if the TX interrupt should have really set */
+ ier = mem_serial_in(p, UART_IER);
+ /* see if the UART's XMIT interrupt is enabled */
+ if (ier & UART_IER_THRI) {
+ lsr = mem_serial_in(p, UART_LSR);
+ /* now check to see if the UART should be
+ generating an interrupt (but isn't) */
+ if (lsr & (UART_LSR_THRE | UART_LSR_TEMT))
+ ret &= ~UART_IIR_NO_INT;
+ }
+ }
+ } else
+ ret = mem_serial_in(p, offset);
+ return ret;
+}
+
+static void ce4100_mem_serial_out(struct uart_port *p, int offset, int value)
+{
+ offset = offset << p->regshift;
+ writel(value, p->membase + offset);
+}
+
+static void ce4100_serial_fixup(int port, struct uart_port *up,
+ unsigned short *capabilites)
+{
+#ifdef CONFIG_EARLY_PRINTK
+ /*
+ * Over ride the legacy port configuration that comes from
+ * asm/serial.h. Using the ioport driver then switching to the
+ * PCI memmaped driver hangs the IOAPIC
+ */
+ if (up->iotype != UPIO_MEM32) {
+ up->uartclk = 14745600;
+ up->mapbase = 0xdffe0200;
+ set_fixmap_nocache(FIX_EARLYCON_MEM_BASE,
+ up->mapbase & PAGE_MASK);
+ up->membase =
+ (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE);
+ up->membase += up->mapbase & ~PAGE_MASK;
+ up->iotype = UPIO_MEM32;
+ up->regshift = 2;
+ }
+#endif
+ up->iobase = 0;
+ up->serial_in = ce4100_mem_serial_in;
+ up->serial_out = ce4100_mem_serial_out;
+
+ *capabilites |= (1 << 12);
+}
+
+static __init void sdv_serial_fixup(void)
+{
+ serial8250_set_isa_configurator(ce4100_serial_fixup);
+}
+
+#else
+static inline void sdv_serial_fixup(void);
+#endif
+
+static void __init sdv_arch_setup(void)
+{
+ sdv_serial_fixup();
+}
+
+/*
+ * CE4100 specific x86_init function overrides and early setup
+ * calls.
+ */
+void __init x86_ce4100_early_setup(void)
+{
+ x86_init.oem.arch_setup = sdv_arch_setup;
+ x86_platform.i8042_detect = ce4100_i8042_detect;
+ x86_init.resources.probe_roms = x86_init_noop;
+ x86_init.mpparse.get_smp_config = x86_init_uint_noop;
+ x86_init.mpparse.find_smp_config = sdv_find_smp_config;
+}
diff --git a/arch/x86/platform/iris/Makefile b/arch/x86/platform/iris/Makefile
new file mode 100644
index 000000000000..db921983a102
--- /dev/null
+++ b/arch/x86/platform/iris/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_X86_32_IRIS) += iris.o
diff --git a/arch/x86/platform/iris/iris.c b/arch/x86/platform/iris/iris.c
new file mode 100644
index 000000000000..1ba7f5ed8c9b
--- /dev/null
+++ b/arch/x86/platform/iris/iris.c
@@ -0,0 +1,91 @@
+/*
+ * Eurobraille/Iris power off support.
+ *
+ * Eurobraille's Iris machine is a PC with no APM or ACPI support.
+ * It is shutdown by a special I/O sequence which this module provides.
+ *
+ * Copyright (C) Shérab <Sebastien.Hinderer@ens-lyon.org>
+ *
+ * This program is free software ; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation ; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY ; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with the program ; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pm.h>
+#include <asm/io.h>
+
+#define IRIS_GIO_BASE 0x340
+#define IRIS_GIO_INPUT IRIS_GIO_BASE
+#define IRIS_GIO_OUTPUT (IRIS_GIO_BASE + 1)
+#define IRIS_GIO_PULSE 0x80 /* First byte to send */
+#define IRIS_GIO_REST 0x00 /* Second byte to send */
+#define IRIS_GIO_NODEV 0xff /* Likely not an Iris */
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sébastien Hinderer <Sebastien.Hinderer@ens-lyon.org>");
+MODULE_DESCRIPTION("A power_off handler for Iris devices from EuroBraille");
+MODULE_SUPPORTED_DEVICE("Eurobraille/Iris");
+
+static int force;
+
+module_param(force, bool, 0);
+MODULE_PARM_DESC(force, "Set to one to force poweroff handler installation.");
+
+static void (*old_pm_power_off)(void);
+
+static void iris_power_off(void)
+{
+ outb(IRIS_GIO_PULSE, IRIS_GIO_OUTPUT);
+ msleep(850);
+ outb(IRIS_GIO_REST, IRIS_GIO_OUTPUT);
+}
+
+/*
+ * Before installing the power_off handler, try to make sure the OS is
+ * running on an Iris. Since Iris does not support DMI, this is done
+ * by reading its input port and seeing whether the read value is
+ * meaningful.
+ */
+static int iris_init(void)
+{
+ unsigned char status;
+ if (force != 1) {
+ printk(KERN_ERR "The force parameter has not been set to 1 so the Iris poweroff handler will not be installed.\n");
+ return -ENODEV;
+ }
+ status = inb(IRIS_GIO_INPUT);
+ if (status == IRIS_GIO_NODEV) {
+ printk(KERN_ERR "This machine does not seem to be an Iris. Power_off handler not installed.\n");
+ return -ENODEV;
+ }
+ old_pm_power_off = pm_power_off;
+ pm_power_off = &iris_power_off;
+ printk(KERN_INFO "Iris power_off handler installed.\n");
+
+ return 0;
+}
+
+static void iris_exit(void)
+{
+ pm_power_off = old_pm_power_off;
+ printk(KERN_INFO "Iris power_off handler uninstalled.\n");
+}
+
+module_init(iris_init);
+module_exit(iris_exit);
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index efbbc552fa95..f61ccdd49341 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1 +1,3 @@
obj-$(CONFIG_X86_MRST) += mrst.o
+obj-$(CONFIG_X86_MRST) += vrtc.o
+obj-$(CONFIG_EARLY_PRINTK_MRST) += early_printk_mrst.o
diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c
new file mode 100644
index 000000000000..65df603622b2
--- /dev/null
+++ b/arch/x86/platform/mrst/early_printk_mrst.c
@@ -0,0 +1,319 @@
+/*
+ * early_printk_mrst.c - early consoles for Intel MID platforms
+ *
+ * Copyright (c) 2008-2010, Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+/*
+ * This file implements two early consoles named mrst and hsu.
+ * mrst is based on Maxim3110 spi-uart device, it exists in both
+ * Moorestown and Medfield platforms, while hsu is based on a High
+ * Speed UART device which only exists in the Medfield platform
+ */
+
+#include <linux/serial_reg.h>
+#include <linux/serial_mfd.h>
+#include <linux/kmsg_dump.h>
+#include <linux/console.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+#include <asm/mrst.h>
+
+#define MRST_SPI_TIMEOUT 0x200000
+#define MRST_REGBASE_SPI0 0xff128000
+#define MRST_REGBASE_SPI1 0xff128400
+#define MRST_CLK_SPI0_REG 0xff11d86c
+
+/* Bit fields in CTRLR0 */
+#define SPI_DFS_OFFSET 0
+
+#define SPI_FRF_OFFSET 4
+#define SPI_FRF_SPI 0x0
+#define SPI_FRF_SSP 0x1
+#define SPI_FRF_MICROWIRE 0x2
+#define SPI_FRF_RESV 0x3
+
+#define SPI_MODE_OFFSET 6
+#define SPI_SCPH_OFFSET 6
+#define SPI_SCOL_OFFSET 7
+#define SPI_TMOD_OFFSET 8
+#define SPI_TMOD_TR 0x0 /* xmit & recv */
+#define SPI_TMOD_TO 0x1 /* xmit only */
+#define SPI_TMOD_RO 0x2 /* recv only */
+#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
+
+#define SPI_SLVOE_OFFSET 10
+#define SPI_SRL_OFFSET 11
+#define SPI_CFS_OFFSET 12
+
+/* Bit fields in SR, 7 bits */
+#define SR_MASK 0x7f /* cover 7 bits */
+#define SR_BUSY (1 << 0)
+#define SR_TF_NOT_FULL (1 << 1)
+#define SR_TF_EMPT (1 << 2)
+#define SR_RF_NOT_EMPT (1 << 3)
+#define SR_RF_FULL (1 << 4)
+#define SR_TX_ERR (1 << 5)
+#define SR_DCOL (1 << 6)
+
+struct dw_spi_reg {
+ u32 ctrl0;
+ u32 ctrl1;
+ u32 ssienr;
+ u32 mwcr;
+ u32 ser;
+ u32 baudr;
+ u32 txfltr;
+ u32 rxfltr;
+ u32 txflr;
+ u32 rxflr;
+ u32 sr;
+ u32 imr;
+ u32 isr;
+ u32 risr;
+ u32 txoicr;
+ u32 rxoicr;
+ u32 rxuicr;
+ u32 msticr;
+ u32 icr;
+ u32 dmacr;
+ u32 dmatdlr;
+ u32 dmardlr;
+ u32 idr;
+ u32 version;
+
+ /* Currently operates as 32 bits, though only the low 16 bits matter */
+ u32 dr;
+} __packed;
+
+#define dw_readl(dw, name) __raw_readl(&(dw)->name)
+#define dw_writel(dw, name, val) __raw_writel((val), &(dw)->name)
+
+/* Default use SPI0 register for mrst, we will detect Penwell and use SPI1 */
+static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
+
+static u32 *pclk_spi0;
+/* Always contains an accessable address, start with 0 */
+static struct dw_spi_reg *pspi;
+
+static struct kmsg_dumper dw_dumper;
+static int dumper_registered;
+
+static void dw_kmsg_dump(struct kmsg_dumper *dumper,
+ enum kmsg_dump_reason reason,
+ const char *s1, unsigned long l1,
+ const char *s2, unsigned long l2)
+{
+ int i;
+
+ /* When run to this, we'd better re-init the HW */
+ mrst_early_console_init();
+
+ for (i = 0; i < l1; i++)
+ early_mrst_console.write(&early_mrst_console, s1 + i, 1);
+ for (i = 0; i < l2; i++)
+ early_mrst_console.write(&early_mrst_console, s2 + i, 1);
+}
+
+/* Set the ratio rate to 115200, 8n1, IRQ disabled */
+static void max3110_write_config(void)
+{
+ u16 config;
+
+ config = 0xc001;
+ dw_writel(pspi, dr, config);
+}
+
+/* Translate char to a eligible word and send to max3110 */
+static void max3110_write_data(char c)
+{
+ u16 data;
+
+ data = 0x8000 | c;
+ dw_writel(pspi, dr, data);
+}
+
+void mrst_early_console_init(void)
+{
+ u32 ctrlr0 = 0;
+ u32 spi0_cdiv;
+ u32 freq; /* Freqency info only need be searched once */
+
+ /* Base clk is 100 MHz, the actual clk = 100M / (clk_divider + 1) */
+ pclk_spi0 = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+ MRST_CLK_SPI0_REG);
+ spi0_cdiv = ((*pclk_spi0) & 0xe00) >> 9;
+ freq = 100000000 / (spi0_cdiv + 1);
+
+ if (mrst_identify_cpu() == MRST_CPU_CHIP_PENWELL)
+ mrst_spi_paddr = MRST_REGBASE_SPI1;
+
+ pspi = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+ mrst_spi_paddr);
+
+ /* Disable SPI controller */
+ dw_writel(pspi, ssienr, 0);
+
+ /* Set control param, 8 bits, transmit only mode */
+ ctrlr0 = dw_readl(pspi, ctrl0);
+
+ ctrlr0 &= 0xfcc0;
+ ctrlr0 |= 0xf | (SPI_FRF_SPI << SPI_FRF_OFFSET)
+ | (SPI_TMOD_TO << SPI_TMOD_OFFSET);
+ dw_writel(pspi, ctrl0, ctrlr0);
+
+ /*
+ * Change the spi0 clk to comply with 115200 bps, use 100000 to
+ * calculate the clk dividor to make the clock a little slower
+ * than real baud rate.
+ */
+ dw_writel(pspi, baudr, freq/100000);
+
+ /* Disable all INT for early phase */
+ dw_writel(pspi, imr, 0x0);
+
+ /* Set the cs to spi-uart */
+ dw_writel(pspi, ser, 0x2);
+
+ /* Enable the HW, the last step for HW init */
+ dw_writel(pspi, ssienr, 0x1);
+
+ /* Set the default configuration */
+ max3110_write_config();
+
+ /* Register the kmsg dumper */
+ if (!dumper_registered) {
+ dw_dumper.dump = dw_kmsg_dump;
+ kmsg_dump_register(&dw_dumper);
+ dumper_registered = 1;
+ }
+}
+
+/* Slave select should be called in the read/write function */
+static void early_mrst_spi_putc(char c)
+{
+ unsigned int timeout;
+ u32 sr;
+
+ timeout = MRST_SPI_TIMEOUT;
+ /* Early putc needs to make sure the TX FIFO is not full */
+ while (--timeout) {
+ sr = dw_readl(pspi, sr);
+ if (!(sr & SR_TF_NOT_FULL))
+ cpu_relax();
+ else
+ break;
+ }
+
+ if (!timeout)
+ pr_warning("MRST earlycon: timed out\n");
+ else
+ max3110_write_data(c);
+}
+
+/* Early SPI only uses polling mode */
+static void early_mrst_spi_write(struct console *con, const char *str, unsigned n)
+{
+ int i;
+
+ for (i = 0; i < n && *str; i++) {
+ if (*str == '\n')
+ early_mrst_spi_putc('\r');
+ early_mrst_spi_putc(*str);
+ str++;
+ }
+}
+
+struct console early_mrst_console = {
+ .name = "earlymrst",
+ .write = early_mrst_spi_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
+
+/*
+ * Following is the early console based on Medfield HSU (High
+ * Speed UART) device.
+ */
+#define HSU_PORT2_PADDR 0xffa28180
+
+static void __iomem *phsu;
+
+void hsu_early_console_init(void)
+{
+ u8 lcr;
+
+ phsu = (void *)set_fixmap_offset_nocache(FIX_EARLYCON_MEM_BASE,
+ HSU_PORT2_PADDR);
+
+ /* Disable FIFO */
+ writeb(0x0, phsu + UART_FCR);
+
+ /* Set to default 115200 bps, 8n1 */
+ lcr = readb(phsu + UART_LCR);
+ writeb((0x80 | lcr), phsu + UART_LCR);
+ writeb(0x18, phsu + UART_DLL);
+ writeb(lcr, phsu + UART_LCR);
+ writel(0x3600, phsu + UART_MUL*4);
+
+ writeb(0x8, phsu + UART_MCR);
+ writeb(0x7, phsu + UART_FCR);
+ writeb(0x3, phsu + UART_LCR);
+
+ /* Clear IRQ status */
+ readb(phsu + UART_LSR);
+ readb(phsu + UART_RX);
+ readb(phsu + UART_IIR);
+ readb(phsu + UART_MSR);
+
+ /* Enable FIFO */
+ writeb(0x7, phsu + UART_FCR);
+}
+
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+static void early_hsu_putc(char ch)
+{
+ unsigned int timeout = 10000; /* 10ms */
+ u8 status;
+
+ while (--timeout) {
+ status = readb(phsu + UART_LSR);
+ if (status & BOTH_EMPTY)
+ break;
+ udelay(1);
+ }
+
+ /* Only write the char when there was no timeout */
+ if (timeout)
+ writeb(ch, phsu + UART_TX);
+}
+
+static void early_hsu_write(struct console *con, const char *str, unsigned n)
+{
+ int i;
+
+ for (i = 0; i < n && *str; i++) {
+ if (*str == '\n')
+ early_hsu_putc('\r');
+ early_hsu_putc(*str);
+ str++;
+ }
+}
+
+struct console early_hsu_console = {
+ .name = "earlyhsu",
+ .write = early_hsu_write,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+};
diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c
index 79ae68154e87..ea6529e93c6f 100644
--- a/arch/x86/platform/mrst/mrst.c
+++ b/arch/x86/platform/mrst/mrst.c
@@ -9,9 +9,19 @@
* as published by the Free Software Foundation; version 2
* of the License.
*/
+
+#define pr_fmt(fmt) "mrst: " fmt
+
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sfi.h>
+#include <linux/intel_pmic_gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/module.h>
@@ -23,7 +33,9 @@
#include <asm/mrst.h>
#include <asm/io.h>
#include <asm/i8259.h>
+#include <asm/intel_scu_ipc.h>
#include <asm/apb_timer.h>
+#include <asm/reboot.h>
/*
* the clockevent devices on Moorestown/Medfield can be APBT or LAPIC clock,
@@ -59,32 +71,6 @@ struct sfi_rtc_table_entry sfi_mrtc_array[SFI_MRTC_MAX];
EXPORT_SYMBOL_GPL(sfi_mrtc_array);
int sfi_mrtc_num;
-static inline void assign_to_mp_irq(struct mpc_intsrc *m,
- struct mpc_intsrc *mp_irq)
-{
- memcpy(mp_irq, m, sizeof(struct mpc_intsrc));
-}
-
-static inline int mp_irq_cmp(struct mpc_intsrc *mp_irq,
- struct mpc_intsrc *m)
-{
- return memcmp(mp_irq, m, sizeof(struct mpc_intsrc));
-}
-
-static void save_mp_irq(struct mpc_intsrc *m)
-{
- int i;
-
- for (i = 0; i < mp_irq_entries; i++) {
- if (!mp_irq_cmp(&mp_irqs[i], m))
- return;
- }
-
- assign_to_mp_irq(m, &mp_irqs[mp_irq_entries]);
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!!\n");
-}
-
/* parse all the mtimer info to a static mtimer array */
static int __init sfi_parse_mtmr(struct sfi_table_header *table)
{
@@ -102,10 +88,10 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table)
memcpy(sfi_mtimer_array, pentry, totallen);
}
- printk(KERN_INFO "SFI: MTIMER info (num = %d):\n", sfi_mtimer_num);
+ pr_debug("SFI MTIMER info (num = %d):\n", sfi_mtimer_num);
pentry = sfi_mtimer_array;
for (totallen = 0; totallen < sfi_mtimer_num; totallen++, pentry++) {
- printk(KERN_INFO "timer[%d]: paddr = 0x%08x, freq = %dHz,"
+ pr_debug("timer[%d]: paddr = 0x%08x, freq = %dHz,"
" irq = %d\n", totallen, (u32)pentry->phys_addr,
pentry->freq_hz, pentry->irq);
if (!pentry->irq)
@@ -118,7 +104,7 @@ static int __init sfi_parse_mtmr(struct sfi_table_header *table)
mp_irq.srcbusirq = pentry->irq; /* IRQ */
mp_irq.dstapic = MP_APIC_ALL;
mp_irq.dstirq = pentry->irq;
- save_mp_irq(&mp_irq);
+ mp_save_irq(&mp_irq);
}
return 0;
@@ -176,19 +162,19 @@ int __init sfi_parse_mrtc(struct sfi_table_header *table)
memcpy(sfi_mrtc_array, pentry, totallen);
}
- printk(KERN_INFO "SFI: RTC info (num = %d):\n", sfi_mrtc_num);
+ pr_debug("SFI RTC info (num = %d):\n", sfi_mrtc_num);
pentry = sfi_mrtc_array;
for (totallen = 0; totallen < sfi_mrtc_num; totallen++, pentry++) {
- printk(KERN_INFO "RTC[%d]: paddr = 0x%08x, irq = %d\n",
+ pr_debug("RTC[%d]: paddr = 0x%08x, irq = %d\n",
totallen, (u32)pentry->phys_addr, pentry->irq);
mp_irq.type = MP_IOAPIC;
mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = 0;
+ mp_irq.irqflag = 0xf; /* level trigger and active low */
mp_irq.srcbus = 0;
mp_irq.srcbusirq = pentry->irq; /* IRQ */
mp_irq.dstapic = MP_APIC_ALL;
mp_irq.dstirq = pentry->irq;
- save_mp_irq(&mp_irq);
+ mp_save_irq(&mp_irq);
}
return 0;
}
@@ -209,6 +195,7 @@ static unsigned long __init mrst_calibrate_tsc(void)
void __init mrst_time_init(void)
{
+ sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
switch (mrst_timer_options) {
case MRST_TIMER_APBT_ONLY:
break;
@@ -224,16 +211,10 @@ void __init mrst_time_init(void)
return;
}
/* we need at least one APB timer */
- sfi_table_parse(SFI_SIG_MTMR, NULL, NULL, sfi_parse_mtmr);
pre_init_apic_IRQ0();
apbt_time_init();
}
-void __init mrst_rtc_init(void)
-{
- sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
-}
-
void __cpuinit mrst_arch_setup(void)
{
if (boot_cpu_data.x86 == 6 && boot_cpu_data.x86_model == 0x27)
@@ -256,6 +237,17 @@ static int mrst_i8042_detect(void)
return 0;
}
+/* Reboot and power off are handled by the SCU on a MID device */
+static void mrst_power_off(void)
+{
+ intel_scu_ipc_simple_command(0xf1, 1);
+}
+
+static void mrst_reboot(void)
+{
+ intel_scu_ipc_simple_command(0xf1, 0);
+}
+
/*
* Moorestown specific x86_init function overrides and early setup
* calls.
@@ -281,6 +273,10 @@ void __init x86_mrst_early_setup(void)
legacy_pic = &null_legacy_pic;
+ /* Moorestown specific power_off/restart method */
+ pm_power_off = mrst_power_off;
+ machine_ops.emergency_restart = mrst_reboot;
+
/* Avoid searching for BIOS MP tables */
x86_init.mpparse.find_smp_config = x86_init_noop;
x86_init.mpparse.get_smp_config = x86_init_uint_noop;
@@ -309,3 +305,505 @@ static inline int __init setup_x86_mrst_timer(char *arg)
return 0;
}
__setup("x86_mrst_timer=", setup_x86_mrst_timer);
+
+/*
+ * Parsing GPIO table first, since the DEVS table will need this table
+ * to map the pin name to the actual pin.
+ */
+static struct sfi_gpio_table_entry *gpio_table;
+static int gpio_num_entry;
+
+static int __init sfi_parse_gpio(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_gpio_table_entry *pentry;
+ int num, i;
+
+ if (gpio_table)
+ return 0;
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_gpio_table_entry);
+ pentry = (struct sfi_gpio_table_entry *)sb->pentry;
+
+ gpio_table = (struct sfi_gpio_table_entry *)
+ kmalloc(num * sizeof(*pentry), GFP_KERNEL);
+ if (!gpio_table)
+ return -1;
+ memcpy(gpio_table, pentry, num * sizeof(*pentry));
+ gpio_num_entry = num;
+
+ pr_debug("GPIO pin info:\n");
+ for (i = 0; i < num; i++, pentry++)
+ pr_debug("info[%2d]: controller = %16.16s, pin_name = %16.16s,"
+ " pin = %d\n", i,
+ pentry->controller_name,
+ pentry->pin_name,
+ pentry->pin_no);
+ return 0;
+}
+
+static int get_gpio_by_name(const char *name)
+{
+ struct sfi_gpio_table_entry *pentry = gpio_table;
+ int i;
+
+ if (!pentry)
+ return -1;
+ for (i = 0; i < gpio_num_entry; i++, pentry++) {
+ if (!strncmp(name, pentry->pin_name, SFI_NAME_LEN))
+ return pentry->pin_no;
+ }
+ return -1;
+}
+
+/*
+ * Here defines the array of devices platform data that IAFW would export
+ * through SFI "DEVS" table, we use name and type to match the device and
+ * its platform data.
+ */
+struct devs_id {
+ char name[SFI_NAME_LEN + 1];
+ u8 type;
+ u8 delay;
+ void *(*get_platform_data)(void *info);
+};
+
+/* the offset for the mapping of global gpio pin to irq */
+#define MRST_IRQ_OFFSET 0x100
+
+static void __init *pmic_gpio_platform_data(void *info)
+{
+ static struct intel_pmic_gpio_platform_data pmic_gpio_pdata;
+ int gpio_base = get_gpio_by_name("pmic_gpio_base");
+
+ if (gpio_base == -1)
+ gpio_base = 64;
+ pmic_gpio_pdata.gpio_base = gpio_base;
+ pmic_gpio_pdata.irq_base = gpio_base + MRST_IRQ_OFFSET;
+ pmic_gpio_pdata.gpiointr = 0xffffeff8;
+
+ return &pmic_gpio_pdata;
+}
+
+static void __init *max3111_platform_data(void *info)
+{
+ struct spi_board_info *spi_info = info;
+ int intr = get_gpio_by_name("max3111_int");
+
+ if (intr == -1)
+ return NULL;
+ spi_info->irq = intr + MRST_IRQ_OFFSET;
+ return NULL;
+}
+
+/* we have multiple max7315 on the board ... */
+#define MAX7315_NUM 2
+static void __init *max7315_platform_data(void *info)
+{
+ static struct pca953x_platform_data max7315_pdata[MAX7315_NUM];
+ static int nr;
+ struct pca953x_platform_data *max7315 = &max7315_pdata[nr];
+ struct i2c_board_info *i2c_info = info;
+ int gpio_base, intr;
+ char base_pin_name[SFI_NAME_LEN + 1];
+ char intr_pin_name[SFI_NAME_LEN + 1];
+
+ if (nr == MAX7315_NUM) {
+ pr_err("too many max7315s, we only support %d\n",
+ MAX7315_NUM);
+ return NULL;
+ }
+ /* we have several max7315 on the board, we only need load several
+ * instances of the same pca953x driver to cover them
+ */
+ strcpy(i2c_info->type, "max7315");
+ if (nr++) {
+ sprintf(base_pin_name, "max7315_%d_base", nr);
+ sprintf(intr_pin_name, "max7315_%d_int", nr);
+ } else {
+ strcpy(base_pin_name, "max7315_base");
+ strcpy(intr_pin_name, "max7315_int");
+ }
+
+ gpio_base = get_gpio_by_name(base_pin_name);
+ intr = get_gpio_by_name(intr_pin_name);
+
+ if (gpio_base == -1)
+ return NULL;
+ max7315->gpio_base = gpio_base;
+ if (intr != -1) {
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ max7315->irq_base = gpio_base + MRST_IRQ_OFFSET;
+ } else {
+ i2c_info->irq = -1;
+ max7315->irq_base = -1;
+ }
+ return max7315;
+}
+
+static void __init *emc1403_platform_data(void *info)
+{
+ static short intr2nd_pdata;
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("thermal_int");
+ int intr2nd = get_gpio_by_name("thermal_alert");
+
+ if (intr == -1 || intr2nd == -1)
+ return NULL;
+
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+ return &intr2nd_pdata;
+}
+
+static void __init *lis331dl_platform_data(void *info)
+{
+ static short intr2nd_pdata;
+ struct i2c_board_info *i2c_info = info;
+ int intr = get_gpio_by_name("accel_int");
+ int intr2nd = get_gpio_by_name("accel_2");
+
+ if (intr == -1 || intr2nd == -1)
+ return NULL;
+
+ i2c_info->irq = intr + MRST_IRQ_OFFSET;
+ intr2nd_pdata = intr2nd + MRST_IRQ_OFFSET;
+
+ return &intr2nd_pdata;
+}
+
+static void __init *no_platform_data(void *info)
+{
+ return NULL;
+}
+
+static const struct devs_id __initconst device_ids[] = {
+ {"pmic_gpio", SFI_DEV_TYPE_SPI, 1, &pmic_gpio_platform_data},
+ {"spi_max3111", SFI_DEV_TYPE_SPI, 0, &max3111_platform_data},
+ {"i2c_max7315", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+ {"i2c_max7315_2", SFI_DEV_TYPE_I2C, 1, &max7315_platform_data},
+ {"emc1403", SFI_DEV_TYPE_I2C, 1, &emc1403_platform_data},
+ {"i2c_accel", SFI_DEV_TYPE_I2C, 0, &lis331dl_platform_data},
+ {"pmic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+ {"msic_audio", SFI_DEV_TYPE_IPC, 1, &no_platform_data},
+ {},
+};
+
+#define MAX_IPCDEVS 24
+static struct platform_device *ipc_devs[MAX_IPCDEVS];
+static int ipc_next_dev;
+
+#define MAX_SCU_SPI 24
+static struct spi_board_info *spi_devs[MAX_SCU_SPI];
+static int spi_next_dev;
+
+#define MAX_SCU_I2C 24
+static struct i2c_board_info *i2c_devs[MAX_SCU_I2C];
+static int i2c_bus[MAX_SCU_I2C];
+static int i2c_next_dev;
+
+static void __init intel_scu_device_register(struct platform_device *pdev)
+{
+ if(ipc_next_dev == MAX_IPCDEVS)
+ pr_err("too many SCU IPC devices");
+ else
+ ipc_devs[ipc_next_dev++] = pdev;
+}
+
+static void __init intel_scu_spi_device_register(struct spi_board_info *sdev)
+{
+ struct spi_board_info *new_dev;
+
+ if (spi_next_dev == MAX_SCU_SPI) {
+ pr_err("too many SCU SPI devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*sdev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed spi dev %s\n",
+ sdev->modalias);
+ return;
+ }
+ memcpy(new_dev, sdev, sizeof(*sdev));
+
+ spi_devs[spi_next_dev++] = new_dev;
+}
+
+static void __init intel_scu_i2c_device_register(int bus,
+ struct i2c_board_info *idev)
+{
+ struct i2c_board_info *new_dev;
+
+ if (i2c_next_dev == MAX_SCU_I2C) {
+ pr_err("too many SCU I2C devices");
+ return;
+ }
+
+ new_dev = kzalloc(sizeof(*idev), GFP_KERNEL);
+ if (!new_dev) {
+ pr_err("failed to alloc mem for delayed i2c dev %s\n",
+ idev->type);
+ return;
+ }
+ memcpy(new_dev, idev, sizeof(*idev));
+
+ i2c_bus[i2c_next_dev] = bus;
+ i2c_devs[i2c_next_dev++] = new_dev;
+}
+
+/* Called by IPC driver */
+void intel_scu_devices_create(void)
+{
+ int i;
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_add(ipc_devs[i]);
+
+ for (i = 0; i < spi_next_dev; i++)
+ spi_register_board_info(spi_devs[i], 1);
+
+ for (i = 0; i < i2c_next_dev; i++) {
+ struct i2c_adapter *adapter;
+ struct i2c_client *client;
+
+ adapter = i2c_get_adapter(i2c_bus[i]);
+ if (adapter) {
+ client = i2c_new_device(adapter, i2c_devs[i]);
+ if (!client)
+ pr_err("can't create i2c device %s\n",
+ i2c_devs[i]->type);
+ } else
+ i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1);
+ }
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_create);
+
+/* Called by IPC driver */
+void intel_scu_devices_destroy(void)
+{
+ int i;
+
+ for (i = 0; i < ipc_next_dev; i++)
+ platform_device_del(ipc_devs[i]);
+}
+EXPORT_SYMBOL_GPL(intel_scu_devices_destroy);
+
+static void __init install_irq_resource(struct platform_device *pdev, int irq)
+{
+ /* Single threaded */
+ static struct resource __initdata res = {
+ .name = "IRQ",
+ .flags = IORESOURCE_IRQ,
+ };
+ res.start = irq;
+ platform_device_add_resources(pdev, &res, 1);
+}
+
+static void __init sfi_handle_ipc_dev(struct platform_device *pdev)
+{
+ const struct devs_id *dev = device_ids;
+ void *pdata = NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == SFI_DEV_TYPE_IPC &&
+ !strncmp(dev->name, pdev->name, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(pdev);
+ break;
+ }
+ dev++;
+ }
+ pdev->dev.platform_data = pdata;
+ intel_scu_device_register(pdev);
+}
+
+static void __init sfi_handle_spi_dev(struct spi_board_info *spi_info)
+{
+ const struct devs_id *dev = device_ids;
+ void *pdata = NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == SFI_DEV_TYPE_SPI &&
+ !strncmp(dev->name, spi_info->modalias, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(spi_info);
+ break;
+ }
+ dev++;
+ }
+ spi_info->platform_data = pdata;
+ if (dev->delay)
+ intel_scu_spi_device_register(spi_info);
+ else
+ spi_register_board_info(spi_info, 1);
+}
+
+static void __init sfi_handle_i2c_dev(int bus, struct i2c_board_info *i2c_info)
+{
+ const struct devs_id *dev = device_ids;
+ void *pdata = NULL;
+
+ while (dev->name[0]) {
+ if (dev->type == SFI_DEV_TYPE_I2C &&
+ !strncmp(dev->name, i2c_info->type, SFI_NAME_LEN)) {
+ pdata = dev->get_platform_data(i2c_info);
+ break;
+ }
+ dev++;
+ }
+ i2c_info->platform_data = pdata;
+
+ if (dev->delay)
+ intel_scu_i2c_device_register(bus, i2c_info);
+ else
+ i2c_register_board_info(bus, i2c_info, 1);
+ }
+
+
+static int __init sfi_parse_devs(struct sfi_table_header *table)
+{
+ struct sfi_table_simple *sb;
+ struct sfi_device_table_entry *pentry;
+ struct spi_board_info spi_info;
+ struct i2c_board_info i2c_info;
+ struct platform_device *pdev;
+ int num, i, bus;
+ int ioapic;
+ struct io_apic_irq_attr irq_attr;
+
+ sb = (struct sfi_table_simple *)table;
+ num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
+ pentry = (struct sfi_device_table_entry *)sb->pentry;
+
+ for (i = 0; i < num; i++, pentry++) {
+ if (pentry->irq != (u8)0xff) { /* native RTE case */
+ /* these SPI2 devices are not exposed to system as PCI
+ * devices, but they have separate RTE entry in IOAPIC
+ * so we have to enable them one by one here
+ */
+ ioapic = mp_find_ioapic(pentry->irq);
+ irq_attr.ioapic = ioapic;
+ irq_attr.ioapic_pin = pentry->irq;
+ irq_attr.trigger = 1;
+ irq_attr.polarity = 1;
+ io_apic_set_pci_routing(NULL, pentry->irq, &irq_attr);
+ }
+ switch (pentry->type) {
+ case SFI_DEV_TYPE_IPC:
+ /* ID as IRQ is a hack that will go away */
+ pdev = platform_device_alloc(pentry->name, pentry->irq);
+ if (pdev == NULL) {
+ pr_err("out of memory for SFI platform device '%s'.\n",
+ pentry->name);
+ continue;
+ }
+ install_irq_resource(pdev, pentry->irq);
+ pr_debug("info[%2d]: IPC bus, name = %16.16s, "
+ "irq = 0x%2x\n", i, pentry->name, pentry->irq);
+ sfi_handle_ipc_dev(pdev);
+ break;
+ case SFI_DEV_TYPE_SPI:
+ memset(&spi_info, 0, sizeof(spi_info));
+ strncpy(spi_info.modalias, pentry->name, SFI_NAME_LEN);
+ spi_info.irq = pentry->irq;
+ spi_info.bus_num = pentry->host_num;
+ spi_info.chip_select = pentry->addr;
+ spi_info.max_speed_hz = pentry->max_freq;
+ pr_debug("info[%2d]: SPI bus = %d, name = %16.16s, "
+ "irq = 0x%2x, max_freq = %d, cs = %d\n", i,
+ spi_info.bus_num,
+ spi_info.modalias,
+ spi_info.irq,
+ spi_info.max_speed_hz,
+ spi_info.chip_select);
+ sfi_handle_spi_dev(&spi_info);
+ break;
+ case SFI_DEV_TYPE_I2C:
+ memset(&i2c_info, 0, sizeof(i2c_info));
+ bus = pentry->host_num;
+ strncpy(i2c_info.type, pentry->name, SFI_NAME_LEN);
+ i2c_info.irq = pentry->irq;
+ i2c_info.addr = pentry->addr;
+ pr_debug("info[%2d]: I2C bus = %d, name = %16.16s, "
+ "irq = 0x%2x, addr = 0x%x\n", i, bus,
+ i2c_info.type,
+ i2c_info.irq,
+ i2c_info.addr);
+ sfi_handle_i2c_dev(bus, &i2c_info);
+ break;
+ case SFI_DEV_TYPE_UART:
+ case SFI_DEV_TYPE_HSI:
+ default:
+ ;
+ }
+ }
+ return 0;
+}
+
+static int __init mrst_platform_init(void)
+{
+ sfi_table_parse(SFI_SIG_GPIO, NULL, NULL, sfi_parse_gpio);
+ sfi_table_parse(SFI_SIG_DEVS, NULL, NULL, sfi_parse_devs);
+ return 0;
+}
+arch_initcall(mrst_platform_init);
+
+/*
+ * we will search these buttons in SFI GPIO table (by name)
+ * and register them dynamically. Please add all possible
+ * buttons here, we will shrink them if no GPIO found.
+ */
+static struct gpio_keys_button gpio_button[] = {
+ {KEY_POWER, -1, 1, "power_btn", EV_KEY, 0, 3000},
+ {KEY_PROG1, -1, 1, "prog_btn1", EV_KEY, 0, 20},
+ {KEY_PROG2, -1, 1, "prog_btn2", EV_KEY, 0, 20},
+ {SW_LID, -1, 1, "lid_switch", EV_SW, 0, 20},
+ {KEY_VOLUMEUP, -1, 1, "vol_up", EV_KEY, 0, 20},
+ {KEY_VOLUMEDOWN, -1, 1, "vol_down", EV_KEY, 0, 20},
+ {KEY_CAMERA, -1, 1, "camera_full", EV_KEY, 0, 20},
+ {KEY_CAMERA_FOCUS, -1, 1, "camera_half", EV_KEY, 0, 20},
+ {SW_KEYPAD_SLIDE, -1, 1, "MagSw1", EV_SW, 0, 20},
+ {SW_KEYPAD_SLIDE, -1, 1, "MagSw2", EV_SW, 0, 20},
+};
+
+static struct gpio_keys_platform_data mrst_gpio_keys = {
+ .buttons = gpio_button,
+ .rep = 1,
+ .nbuttons = -1, /* will fill it after search */
+};
+
+static struct platform_device pb_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &mrst_gpio_keys,
+ },
+};
+
+/*
+ * Shrink the non-existent buttons, register the gpio button
+ * device if there is some
+ */
+static int __init pb_keys_init(void)
+{
+ struct gpio_keys_button *gb = gpio_button;
+ int i, num, good = 0;
+
+ num = sizeof(gpio_button) / sizeof(struct gpio_keys_button);
+ for (i = 0; i < num; i++) {
+ gb[i].gpio = get_gpio_by_name(gb[i].desc);
+ if (gb[i].gpio == -1)
+ continue;
+
+ if (i != good)
+ gb[good] = gb[i];
+ good++;
+ }
+
+ if (good) {
+ mrst_gpio_keys.nbuttons = good;
+ return platform_device_register(&pb_device);
+ }
+ return 0;
+}
+late_initcall(pb_keys_init);
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
new file mode 100644
index 000000000000..32cd7edd71a0
--- /dev/null
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -0,0 +1,165 @@
+/*
+ * vrtc.c: Driver for virtual RTC device on Intel MID platform
+ *
+ * (C) Copyright 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * Note:
+ * VRTC is emulated by system controller firmware, the real HW
+ * RTC is located in the PMIC device. SCU FW shadows PMIC RTC
+ * in a memory mapped IO space that is visible to the host IA
+ * processor.
+ *
+ * This driver is based on RTC CMOS driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sfi.h>
+#include <linux/platform_device.h>
+
+#include <asm/mrst.h>
+#include <asm/mrst-vrtc.h>
+#include <asm/time.h>
+#include <asm/fixmap.h>
+
+static unsigned char __iomem *vrtc_virt_base;
+
+unsigned char vrtc_cmos_read(unsigned char reg)
+{
+ unsigned char retval;
+
+ /* vRTC's registers range from 0x0 to 0xD */
+ if (reg > 0xd || !vrtc_virt_base)
+ return 0xff;
+
+ lock_cmos_prefix(reg);
+ retval = __raw_readb(vrtc_virt_base + (reg << 2));
+ lock_cmos_suffix(reg);
+ return retval;
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_read);
+
+void vrtc_cmos_write(unsigned char val, unsigned char reg)
+{
+ if (reg > 0xd || !vrtc_virt_base)
+ return;
+
+ lock_cmos_prefix(reg);
+ __raw_writeb(val, vrtc_virt_base + (reg << 2));
+ lock_cmos_suffix(reg);
+}
+EXPORT_SYMBOL_GPL(vrtc_cmos_write);
+
+unsigned long vrtc_get_time(void)
+{
+ u8 sec, min, hour, mday, mon;
+ u32 year;
+
+ while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
+ cpu_relax();
+
+ sec = vrtc_cmos_read(RTC_SECONDS);
+ min = vrtc_cmos_read(RTC_MINUTES);
+ hour = vrtc_cmos_read(RTC_HOURS);
+ mday = vrtc_cmos_read(RTC_DAY_OF_MONTH);
+ mon = vrtc_cmos_read(RTC_MONTH);
+ year = vrtc_cmos_read(RTC_YEAR);
+
+ /* vRTC YEAR reg contains the offset to 1960 */
+ year += 1960;
+
+ printk(KERN_INFO "vRTC: sec: %d min: %d hour: %d day: %d "
+ "mon: %d year: %d\n", sec, min, hour, mday, mon, year);
+
+ return mktime(year, mon, mday, hour, min, sec);
+}
+
+/* Only care about the minutes and seconds */
+int vrtc_set_mmss(unsigned long nowtime)
+{
+ int real_sec, real_min;
+ int vrtc_min;
+
+ vrtc_min = vrtc_cmos_read(RTC_MINUTES);
+
+ real_sec = nowtime % 60;
+ real_min = nowtime / 60;
+ if (((abs(real_min - vrtc_min) + 15)/30) & 1)
+ real_min += 30;
+ real_min %= 60;
+
+ vrtc_cmos_write(real_sec, RTC_SECONDS);
+ vrtc_cmos_write(real_min, RTC_MINUTES);
+ return 0;
+}
+
+void __init mrst_rtc_init(void)
+{
+ unsigned long rtc_paddr;
+ void __iomem *virt_base;
+
+ sfi_table_parse(SFI_SIG_MRTC, NULL, NULL, sfi_parse_mrtc);
+ if (!sfi_mrtc_num)
+ return;
+
+ rtc_paddr = sfi_mrtc_array[0].phys_addr;
+
+ /* vRTC's register address may not be page aligned */
+ set_fixmap_nocache(FIX_LNW_VRTC, rtc_paddr);
+
+ virt_base = (void __iomem *)__fix_to_virt(FIX_LNW_VRTC);
+ virt_base += rtc_paddr & ~PAGE_MASK;
+ vrtc_virt_base = virt_base;
+
+ x86_platform.get_wallclock = vrtc_get_time;
+ x86_platform.set_wallclock = vrtc_set_mmss;
+}
+
+/*
+ * The Moorestown platform has a memory mapped virtual RTC device that emulates
+ * the programming interface of the RTC.
+ */
+
+static struct resource vrtc_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device vrtc_device = {
+ .name = "rtc_mrst",
+ .id = -1,
+ .resource = vrtc_resources,
+ .num_resources = ARRAY_SIZE(vrtc_resources),
+};
+
+/* Register the RTC device if appropriate */
+static int __init mrst_device_create(void)
+{
+ /* No Moorestown, no device */
+ if (!mrst_identify_cpu())
+ return -ENODEV;
+ /* No timer, no device */
+ if (!sfi_mrtc_num)
+ return -ENODEV;
+
+ /* iomem resource */
+ vrtc_resources[0].start = sfi_mrtc_array[0].phys_addr;
+ vrtc_resources[0].end = sfi_mrtc_array[0].phys_addr +
+ MRST_VRTC_MAP_SZ;
+ /* irq resource */
+ vrtc_resources[1].start = sfi_mrtc_array[0].irq;
+ vrtc_resources[1].end = sfi_mrtc_array[0].irq;
+
+ return platform_device_register(&vrtc_device);
+}
+
+module_init(mrst_device_create);
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index dd4c281ffe57..7785b72ecc3a 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -34,23 +34,12 @@
#ifdef CONFIG_X86_LOCAL_APIC
static unsigned long sfi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
-static void __init mp_sfi_register_lapic_address(unsigned long address)
-{
- mp_lapic_addr = address;
-
- set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
- if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = read_apic_id();
-
- pr_info("Boot CPU = %d\n", boot_cpu_physical_apicid);
-}
-
/* All CPUs enumerated by SFI must be present and enabled */
static void __cpuinit mp_sfi_register_lapic(u8 id)
{
- if (MAX_APICS - id <= 0) {
+ if (MAX_LOCAL_APIC - id <= 0) {
pr_warning("Processor #%d invalid (max %d)\n",
- id, MAX_APICS);
+ id, MAX_LOCAL_APIC);
return;
}
@@ -110,7 +99,7 @@ static int __init sfi_parse_ioapic(struct sfi_table_header *table)
int __init sfi_platform_init(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
- mp_sfi_register_lapic_address(sfi_lapic_addr);
+ register_lapic_address(sfi_lapic_addr);
sfi_table_parse(SFI_SIG_CPUS, NULL, NULL, sfi_parse_cpus);
#endif
#ifdef CONFIG_X86_IO_APIC
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index ba9caa808a9c..df58e9cad96a 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1341,7 +1341,7 @@ uv_activation_descriptor_init(int node, int pnode)
/*
* each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
- * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per uvhub
+ * per cpu; and one per cpu on the uvhub (UV_ADP_SIZE)
*/
bau_desc = kmalloc_node(sizeof(struct bau_desc) * UV_ADP_SIZE
* UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
@@ -1490,7 +1490,7 @@ calculate_destination_timeout(void)
/*
* initialize the bau_control structure for each cpu
*/
-static void __init uv_init_per_cpu(int nuvhubs)
+static int __init uv_init_per_cpu(int nuvhubs)
{
int i;
int cpu;
@@ -1507,7 +1507,7 @@ static void __init uv_init_per_cpu(int nuvhubs)
struct bau_control *smaster = NULL;
struct socket_desc {
short num_cpus;
- short cpu_number[16];
+ short cpu_number[MAX_CPUS_PER_SOCKET];
};
struct uvhub_desc {
unsigned short socket_mask;
@@ -1540,6 +1540,10 @@ static void __init uv_init_per_cpu(int nuvhubs)
sdp = &bdp->socket[socket];
sdp->cpu_number[sdp->num_cpus] = cpu;
sdp->num_cpus++;
+ if (sdp->num_cpus > MAX_CPUS_PER_SOCKET) {
+ printk(KERN_EMERG "%d cpus per socket invalid\n", sdp->num_cpus);
+ return 1;
+ }
}
for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
if (!(*(uvhub_mask + (uvhub/8)) & (1 << (uvhub%8))))
@@ -1570,6 +1574,12 @@ static void __init uv_init_per_cpu(int nuvhubs)
bcp->uvhub_master = hmaster;
bcp->uvhub_cpu = uv_cpu_hub_info(cpu)->
blade_processor_id;
+ if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) {
+ printk(KERN_EMERG
+ "%d cpus per uvhub invalid\n",
+ bcp->uvhub_cpu);
+ return 1;
+ }
}
nextsocket:
socket++;
@@ -1595,6 +1605,7 @@ nextsocket:
bcp->congested_reps = congested_reps;
bcp->congested_period = congested_period;
}
+ return 0;
}
/*
@@ -1625,7 +1636,10 @@ static int __init uv_bau_init(void)
spin_lock_init(&disable_lock);
congested_cycles = microsec_2_cycles(congested_response_us);
- uv_init_per_cpu(nuvhubs);
+ if (uv_init_per_cpu(nuvhubs)) {
+ nobau = 1;
+ return 0;
+ }
uv_partition_base_pnode = 0x7fffffff;
for (uvhub = 0; uvhub < nuvhubs; uvhub++)
diff --git a/arch/x86/platform/visws/visws_quirks.c b/arch/x86/platform/visws/visws_quirks.c
index 3371bd053b89..632037671746 100644
--- a/arch/x86/platform/visws/visws_quirks.c
+++ b/arch/x86/platform/visws/visws_quirks.c
@@ -171,7 +171,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
ver = m->apicver;
if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
- m->apicid, MAX_APICS);
+ m->apicid, MAX_LOCAL_APIC);
return;
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 09:05:55 +0300