4 files changed, 45 insertions, 17 deletions

diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
index e4695985f9de..14a63ed6fe09 100644
--- a/arch/x86/pci/acpi.c
+++ b/arch/x86/pci/acpi.c
@@ -325,6 +325,26 @@ static void release_pci_root_info(struct pci_host_bridge *bridge)
 	kfree(info);
 }
 
+/*
+ * An IO port or MMIO resource assigned to a PCI host bridge may be
+ * consumed by the host bridge itself or available to its child
+ * bus/devices. The ACPI specification defines a bit (Producer/Consumer)
+ * to tell whether the resource is consumed by the host bridge itself,
+ * but firmware hasn't used that bit consistently, so we can't rely on it.
+ *
+ * On x86 and IA64 platforms, all IO port and MMIO resources are assumed
+ * to be available to child bus/devices except one special case:
+ *     IO port [0xCF8-0xCFF] is consumed by the host bridge itself
+ *     to access PCI configuration space.
+ *
+ * So explicitly filter out PCI CFG IO ports[0xCF8-0xCFF].
+ */
+static bool resource_is_pcicfg_ioport(struct resource *res)
+{
+	return (res->flags & IORESOURCE_IO) &&
+		res->start == 0xCF8 && res->end == 0xCFF;
+}
+
 static void probe_pci_root_info(struct pci_root_info *info,
 				struct acpi_device *device,
 				int busnum, int domain,
@@ -346,8 +366,8 @@ static void probe_pci_root_info(struct pci_root_info *info,
 			"no IO and memory resources present in _CRS\n");
 	else
 		resource_list_for_each_entry_safe(entry, tmp, list) {
-			if ((entry->res->flags & IORESOURCE_WINDOW) == 0 ||
-			    (entry->res->flags & IORESOURCE_DISABLED))
+			if ((entry->res->flags & IORESOURCE_DISABLED) ||
+			    resource_is_pcicfg_ioport(entry->res))
 				resource_list_destroy_entry(entry);
 			else
 				entry->res->name = info->name;
@@ -462,9 +482,16 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
 
 int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 {
-	struct pci_sysdata *sd = bridge->bus->sysdata;
-
-	ACPI_COMPANION_SET(&bridge->dev, sd->companion);
+	/*
+	 * We pass NULL as parent to pci_create_root_bus(), so if it is not NULL
+	 * here, pci_create_root_bus() has been called by someone else and
+	 * sysdata is likely to be different from what we expect.  Let it go in
+	 * that case.
+	 */
+	if (!bridge->dev.parent) {
+		struct pci_sysdata *sd = bridge->bus->sysdata;
+		ACPI_COMPANION_SET(&bridge->dev, sd->companion);
+	}
 	return 0;
 }
 
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 349c0d32cc0b..0a9f2caf358f 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -429,12 +429,12 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
  	 * Caller can followup with UC MINUS request and add a WC mtrr if there
  	 * is a free mtrr slot.
  	 */
-	if (!pat_enabled && write_combine)
+	if (!pat_enabled() && write_combine)
 		return -EINVAL;
 
-	if (pat_enabled && write_combine)
+	if (pat_enabled() && write_combine)
 		prot |= cachemode2protval(_PAGE_CACHE_MODE_WC);
-	else if (pat_enabled || boot_cpu_data.x86 > 3)
+	else if (pat_enabled() || boot_cpu_data.x86 > 3)
 		/*
 		 * ioremap() and ioremap_nocache() defaults to UC MINUS for now.
 		 * To avoid attribute conflicts, request UC MINUS here
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 852aa4c92da0..27062303c881 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -208,6 +208,7 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 
 static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 {
+	struct irq_alloc_info info;
 	int polarity;
 
 	if (dev->irq_managed && dev->irq > 0)
@@ -217,14 +218,13 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 		polarity = 0; /* active high */
 	else
 		polarity = 1; /* active low */
+	ioapic_set_alloc_attr(&info, dev_to_node(&dev->dev), 1, polarity);
 
 	/*
 	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
 	 * IOAPIC RTE entries, so we just enable RTE for the device.
 	 */
-	if (mp_set_gsi_attr(dev->irq, 1, polarity, dev_to_node(&dev->dev)))
-		return -EBUSY;
-	if (mp_map_gsi_to_irq(dev->irq, IOAPIC_MAP_ALLOC) < 0)
+	if (mp_map_gsi_to_irq(dev->irq, IOAPIC_MAP_ALLOC, &info) < 0)
 		return -EBUSY;
 
 	dev->irq_managed = 1;
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 5dc6ca5e1741..9bd115484745 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -146,19 +146,20 @@ static void __init pirq_peer_trick(void)
 
 /*
  *  Code for querying and setting of IRQ routes on various interrupt routers.
+ *  PIC Edge/Level Control Registers (ELCR) 0x4d0 & 0x4d1.
  */
 
-void eisa_set_level_irq(unsigned int irq)
+void elcr_set_level_irq(unsigned int irq)
 {
 	unsigned char mask = 1 << (irq & 7);
 	unsigned int port = 0x4d0 + (irq >> 3);
 	unsigned char val;
-	static u16 eisa_irq_mask;
+	static u16 elcr_irq_mask;
 
-	if (irq >= 16 || (1 << irq) & eisa_irq_mask)
+	if (irq >= 16 || (1 << irq) & elcr_irq_mask)
 		return;
 
-	eisa_irq_mask |= (1 << irq);
+	elcr_irq_mask |= (1 << irq);
 	printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq);
 	val = inb(port);
 	if (!(val & mask)) {
@@ -965,11 +966,11 @@ static int pcibios_lookup_irq(struct pci_dev *dev, int assign)
 	} else if (r->get && (irq = r->get(pirq_router_dev, dev, pirq)) && \
 	((!(pci_probe & PCI_USE_PIRQ_MASK)) || ((1 << irq) & mask))) {
 		msg = "found";
-		eisa_set_level_irq(irq);
+		elcr_set_level_irq(irq);
 	} else if (newirq && r->set &&
 		(dev->class >> 8) != PCI_CLASS_DISPLAY_VGA) {
 		if (r->set(pirq_router_dev, dev, pirq, newirq)) {
-			eisa_set_level_irq(newirq);
+			elcr_set_level_irq(newirq);
 			msg = "assigned";
 			irq = newirq;
 		}