diff options
Diffstat (limited to 'arch/x86/mm/srat_32.c')
| -rw-r--r-- | arch/x86/mm/srat_32.c | 280 |
1 files changed, 280 insertions, 0 deletions
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c new file mode 100644 index 000000000000..f41d67f8f831 --- /dev/null +++ b/arch/x86/mm/srat_32.c @@ -0,0 +1,280 @@ +/* + * Some of the code in this file has been gleaned from the 64 bit + * discontigmem support code base. + * + * Copyright (C) 2002, IBM Corp. + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for more + * details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Send feedback to Pat Gaughen <gone@us.ibm.com> + */ +#include <linux/mm.h> +#include <linux/bootmem.h> +#include <linux/mmzone.h> +#include <linux/acpi.h> +#include <linux/nodemask.h> +#include <asm/srat.h> +#include <asm/topology.h> +#include <asm/smp.h> +#include <asm/e820.h> + +/* + * proximity macros and definitions + */ +#define NODE_ARRAY_INDEX(x) ((x) / 8) /* 8 bits/char */ +#define NODE_ARRAY_OFFSET(x) ((x) % 8) /* 8 bits/char */ +#define BMAP_SET(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] |= 1 << NODE_ARRAY_OFFSET(bit)) +#define BMAP_TEST(bmap, bit) ((bmap)[NODE_ARRAY_INDEX(bit)] & (1 << NODE_ARRAY_OFFSET(bit))) +/* bitmap length; _PXM is at most 255 */ +#define PXM_BITMAP_LEN (MAX_PXM_DOMAINS / 8) +static u8 __initdata pxm_bitmap[PXM_BITMAP_LEN]; /* bitmap of proximity domains */ + +#define MAX_CHUNKS_PER_NODE 3 +#define MAXCHUNKS (MAX_CHUNKS_PER_NODE * MAX_NUMNODES) +struct node_memory_chunk_s { + unsigned long start_pfn; + unsigned long end_pfn; + u8 pxm; // proximity domain of node + u8 nid; // which cnode contains this chunk? + u8 bank; // which mem bank on this node +}; +static struct node_memory_chunk_s __initdata node_memory_chunk[MAXCHUNKS]; + +static int __initdata num_memory_chunks; /* total number of memory chunks */ +static u8 __initdata apicid_to_pxm[MAX_APICID]; + +int numa_off __initdata; +int acpi_numa __initdata; + +static __init void bad_srat(void) +{ + printk(KERN_ERR "SRAT: SRAT not used.\n"); + acpi_numa = -1; + num_memory_chunks = 0; +} + +static __init inline int srat_disabled(void) +{ + return numa_off || acpi_numa < 0; +} + +/* Identify CPU proximity domains */ +void __init +acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *cpu_affinity) +{ + if (srat_disabled()) + return; + if (cpu_affinity->header.length != + sizeof(struct acpi_srat_cpu_affinity)) { + bad_srat(); + return; + } + + if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0) + return; /* empty entry */ + + /* mark this node as "seen" in node bitmap */ + BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo); + + apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo; + + printk(KERN_DEBUG "CPU %02x in proximity domain %02x\n", + cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo); +} + +/* + * Identify memory proximity domains and hot-remove capabilities. + * Fill node memory chunk list structure. + */ +void __init +acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *memory_affinity) +{ + unsigned long long paddr, size; + unsigned long start_pfn, end_pfn; + u8 pxm; + struct node_memory_chunk_s *p, *q, *pend; + + if (srat_disabled()) + return; + if (memory_affinity->header.length != + sizeof(struct acpi_srat_mem_affinity)) { + bad_srat(); + return; + } + + if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0) + return; /* empty entry */ + + pxm = memory_affinity->proximity_domain & 0xff; + + /* mark this node as "seen" in node bitmap */ + BMAP_SET(pxm_bitmap, pxm); + + /* calculate info for memory chunk structure */ + paddr = memory_affinity->base_address; + size = memory_affinity->length; + + start_pfn = paddr >> PAGE_SHIFT; + end_pfn = (paddr + size) >> PAGE_SHIFT; + + + if (num_memory_chunks >= MAXCHUNKS) { + printk(KERN_WARNING "Too many mem chunks in SRAT." + " Ignoring %lld MBytes at %llx\n", + size/(1024*1024), paddr); + return; + } + + /* Insertion sort based on base address */ + pend = &node_memory_chunk[num_memory_chunks]; + for (p = &node_memory_chunk[0]; p < pend; p++) { + if (start_pfn < p->start_pfn) + break; + } + if (p < pend) { + for (q = pend; q >= p; q--) + *(q + 1) = *q; + } + p->start_pfn = start_pfn; + p->end_pfn = end_pfn; + p->pxm = pxm; + + num_memory_chunks++; + + printk(KERN_DEBUG "Memory range %08lx to %08lx (type %x)" + " in proximity domain %02x %s\n", + start_pfn, end_pfn, + memory_affinity->memory_type, + pxm, + ((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ? + "enabled and removable" : "enabled" ) ); +} + +/* Callback for SLIT parsing */ +void __init acpi_numa_slit_init(struct acpi_table_slit *slit) +{ +} + +void acpi_numa_arch_fixup(void) +{ +} +/* + * The SRAT table always lists ascending addresses, so can always + * assume that the first "start" address that you see is the real + * start of the node, and that the current "end" address is after + * the previous one. + */ +static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk) +{ + /* + * Only add present memory as told by the e820. + * There is no guarantee from the SRAT that the memory it + * enumerates is present at boot time because it represents + * *possible* memory hotplug areas the same as normal RAM. + */ + if (memory_chunk->start_pfn >= max_pfn) { + printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n", + memory_chunk->start_pfn, memory_chunk->end_pfn); + return; + } + if (memory_chunk->nid != nid) + return; + + if (!node_has_online_mem(nid)) + node_start_pfn[nid] = memory_chunk->start_pfn; + + if (node_start_pfn[nid] > memory_chunk->start_pfn) + node_start_pfn[nid] = memory_chunk->start_pfn; + + if (node_end_pfn[nid] < memory_chunk->end_pfn) + node_end_pfn[nid] = memory_chunk->end_pfn; +} + +int __init get_memcfg_from_srat(void) +{ + int i, j, nid; + + + if (srat_disabled()) + goto out_fail; + + if (num_memory_chunks == 0) { + printk(KERN_WARNING + "could not finy any ACPI SRAT memory areas.\n"); + goto out_fail; + } + + /* Calculate total number of nodes in system from PXM bitmap and create + * a set of sequential node IDs starting at zero. (ACPI doesn't seem + * to specify the range of _PXM values.) + */ + /* + * MCD - we no longer HAVE to number nodes sequentially. PXM domain + * numbers could go as high as 256, and MAX_NUMNODES for i386 is typically + * 32, so we will continue numbering them in this manner until MAX_NUMNODES + * approaches MAX_PXM_DOMAINS for i386. + */ + nodes_clear(node_online_map); + for (i = 0; i < MAX_PXM_DOMAINS; i++) { + if (BMAP_TEST(pxm_bitmap, i)) { + int nid = acpi_map_pxm_to_node(i); + node_set_online(nid); + } + } + BUG_ON(num_online_nodes() == 0); + + /* set cnode id in memory chunk structure */ + for (i = 0; i < num_memory_chunks; i++) + node_memory_chunk[i].nid = pxm_to_node(node_memory_chunk[i].pxm); + + printk(KERN_DEBUG "pxm bitmap: "); + for (i = 0; i < sizeof(pxm_bitmap); i++) { + printk(KERN_CONT "%02x ", pxm_bitmap[i]); + } + printk(KERN_CONT "\n"); + printk(KERN_DEBUG "Number of logical nodes in system = %d\n", + num_online_nodes()); + printk(KERN_DEBUG "Number of memory chunks in system = %d\n", + num_memory_chunks); + + for (i = 0; i < MAX_APICID; i++) + apicid_2_node[i] = pxm_to_node(apicid_to_pxm[i]); + + for (j = 0; j < num_memory_chunks; j++){ + struct node_memory_chunk_s * chunk = &node_memory_chunk[j]; + printk(KERN_DEBUG + "chunk %d nid %d start_pfn %08lx end_pfn %08lx\n", + j, chunk->nid, chunk->start_pfn, chunk->end_pfn); + node_read_chunk(chunk->nid, chunk); + e820_register_active_regions(chunk->nid, chunk->start_pfn, + min(chunk->end_pfn, max_pfn)); + } + + for_each_online_node(nid) { + unsigned long start = node_start_pfn[nid]; + unsigned long end = min(node_end_pfn[nid], max_pfn); + + memory_present(nid, start, end); + node_remap_size[nid] = node_memmap_size_bytes(nid, start, end); + } + return 1; +out_fail: + printk(KERN_ERR "failed to get NUMA memory information from SRAT" + " table\n"); + return 0; +} |