diff options
Diffstat (limited to 'arch/x86/lib')
| -rw-r--r-- | arch/x86/lib/memcpy_64.S | 102 | ||||
| -rw-r--r-- | arch/x86/lib/usercopy_64.c | 30 |
2 files changed, 69 insertions, 63 deletions
diff --git a/arch/x86/lib/memcpy_64.S b/arch/x86/lib/memcpy_64.S index 9a53a06e5a3e..c3b527a9f95d 100644 --- a/arch/x86/lib/memcpy_64.S +++ b/arch/x86/lib/memcpy_64.S @@ -184,11 +184,11 @@ ENDPROC(memcpy_orig) #ifndef CONFIG_UML /* - * memcpy_mcsafe_unrolled - memory copy with machine check exception handling + * __memcpy_mcsafe - memory copy with machine check exception handling * Note that we only catch machine checks when reading the source addresses. * Writes to target are posted and don't generate machine checks. */ -ENTRY(memcpy_mcsafe_unrolled) +ENTRY(__memcpy_mcsafe) cmpl $8, %edx /* Less than 8 bytes? Go to byte copy loop */ jb .L_no_whole_words @@ -204,58 +204,29 @@ ENTRY(memcpy_mcsafe_unrolled) subl $8, %ecx negl %ecx subl %ecx, %edx -.L_copy_leading_bytes: +.L_read_leading_bytes: movb (%rsi), %al +.L_write_leading_bytes: movb %al, (%rdi) incq %rsi incq %rdi decl %ecx - jnz .L_copy_leading_bytes + jnz .L_read_leading_bytes .L_8byte_aligned: - /* Figure out how many whole cache lines (64-bytes) to copy */ - movl %edx, %ecx - andl $63, %edx - shrl $6, %ecx - jz .L_no_whole_cache_lines - - /* Loop copying whole cache lines */ -.L_cache_w0: movq (%rsi), %r8 -.L_cache_w1: movq 1*8(%rsi), %r9 -.L_cache_w2: movq 2*8(%rsi), %r10 -.L_cache_w3: movq 3*8(%rsi), %r11 - movq %r8, (%rdi) - movq %r9, 1*8(%rdi) - movq %r10, 2*8(%rdi) - movq %r11, 3*8(%rdi) -.L_cache_w4: movq 4*8(%rsi), %r8 -.L_cache_w5: movq 5*8(%rsi), %r9 -.L_cache_w6: movq 6*8(%rsi), %r10 -.L_cache_w7: movq 7*8(%rsi), %r11 - movq %r8, 4*8(%rdi) - movq %r9, 5*8(%rdi) - movq %r10, 6*8(%rdi) - movq %r11, 7*8(%rdi) - leaq 64(%rsi), %rsi - leaq 64(%rdi), %rdi - decl %ecx - jnz .L_cache_w0 - - /* Are there any trailing 8-byte words? */ -.L_no_whole_cache_lines: movl %edx, %ecx andl $7, %edx shrl $3, %ecx jz .L_no_whole_words - /* Copy trailing words */ -.L_copy_trailing_words: +.L_read_words: movq (%rsi), %r8 - mov %r8, (%rdi) - leaq 8(%rsi), %rsi - leaq 8(%rdi), %rdi +.L_write_words: + movq %r8, (%rdi) + addq $8, %rsi + addq $8, %rdi decl %ecx - jnz .L_copy_trailing_words + jnz .L_read_words /* Any trailing bytes? */ .L_no_whole_words: @@ -264,38 +235,53 @@ ENTRY(memcpy_mcsafe_unrolled) /* Copy trailing bytes */ movl %edx, %ecx -.L_copy_trailing_bytes: +.L_read_trailing_bytes: movb (%rsi), %al +.L_write_trailing_bytes: movb %al, (%rdi) incq %rsi incq %rdi decl %ecx - jnz .L_copy_trailing_bytes + jnz .L_read_trailing_bytes /* Copy successful. Return zero */ .L_done_memcpy_trap: xorq %rax, %rax ret -ENDPROC(memcpy_mcsafe_unrolled) -EXPORT_SYMBOL_GPL(memcpy_mcsafe_unrolled) +ENDPROC(__memcpy_mcsafe) +EXPORT_SYMBOL_GPL(__memcpy_mcsafe) .section .fixup, "ax" - /* Return -EFAULT for any failure */ -.L_memcpy_mcsafe_fail: - mov $-EFAULT, %rax + /* + * Return number of bytes not copied for any failure. Note that + * there is no "tail" handling since the source buffer is 8-byte + * aligned and poison is cacheline aligned. + */ +.E_read_words: + shll $3, %ecx +.E_leading_bytes: + addl %edx, %ecx +.E_trailing_bytes: + mov %ecx, %eax ret + /* + * For write fault handling, given the destination is unaligned, + * we handle faults on multi-byte writes with a byte-by-byte + * copy up to the write-protected page. + */ +.E_write_words: + shll $3, %ecx + addl %edx, %ecx + movl %ecx, %edx + jmp mcsafe_handle_tail + .previous - _ASM_EXTABLE_FAULT(.L_copy_leading_bytes, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w0, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w1, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w2, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w3, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w4, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w5, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w6, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_cache_w7, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_copy_trailing_words, .L_memcpy_mcsafe_fail) - _ASM_EXTABLE_FAULT(.L_copy_trailing_bytes, .L_memcpy_mcsafe_fail) + _ASM_EXTABLE_FAULT(.L_read_leading_bytes, .E_leading_bytes) + _ASM_EXTABLE_FAULT(.L_read_words, .E_read_words) + _ASM_EXTABLE_FAULT(.L_read_trailing_bytes, .E_trailing_bytes) + _ASM_EXTABLE(.L_write_leading_bytes, .E_leading_bytes) + _ASM_EXTABLE(.L_write_words, .E_write_words) + _ASM_EXTABLE(.L_write_trailing_bytes, .E_trailing_bytes) #endif diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index 75d3776123cc..9c5606d88f61 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -23,13 +23,13 @@ unsigned long __clear_user(void __user *addr, unsigned long size) asm volatile( " testq %[size8],%[size8]\n" " jz 4f\n" - "0: movq %[zero],(%[dst])\n" - " addq %[eight],%[dst]\n" + "0: movq $0,(%[dst])\n" + " addq $8,%[dst]\n" " decl %%ecx ; jnz 0b\n" "4: movq %[size1],%%rcx\n" " testl %%ecx,%%ecx\n" " jz 2f\n" - "1: movb %b[zero],(%[dst])\n" + "1: movb $0,(%[dst])\n" " incq %[dst]\n" " decl %%ecx ; jnz 1b\n" "2:\n" @@ -40,8 +40,7 @@ unsigned long __clear_user(void __user *addr, unsigned long size) _ASM_EXTABLE(0b,3b) _ASM_EXTABLE(1b,2b) : [size8] "=&c"(size), [dst] "=&D" (__d0) - : [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr), - [zero] "r" (0UL), [eight] "r" (8UL)); + : [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr)); clac(); return size; } @@ -75,6 +74,27 @@ copy_user_handle_tail(char *to, char *from, unsigned len) return len; } +/* + * Similar to copy_user_handle_tail, probe for the write fault point, + * but reuse __memcpy_mcsafe in case a new read error is encountered. + * clac() is handled in _copy_to_iter_mcsafe(). + */ +__visible unsigned long +mcsafe_handle_tail(char *to, char *from, unsigned len) +{ + for (; len; --len, to++, from++) { + /* + * Call the assembly routine back directly since + * memcpy_mcsafe() may silently fallback to memcpy. + */ + unsigned long rem = __memcpy_mcsafe(to, from, 1); + + if (rem) + break; + } + return len; +} + #ifdef CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE /** * clean_cache_range - write back a cache range with CLWB |