diff options
Diffstat (limited to 'arch/x86/boot/compressed/efi_mixed.S')
| -rw-r--r-- | arch/x86/boot/compressed/efi_mixed.S | 107 |
1 files changed, 42 insertions, 65 deletions
diff --git a/arch/x86/boot/compressed/efi_mixed.S b/arch/x86/boot/compressed/efi_mixed.S index 4ca70bf93dc0..f4e22ef774ab 100644 --- a/arch/x86/boot/compressed/efi_mixed.S +++ b/arch/x86/boot/compressed/efi_mixed.S @@ -26,8 +26,8 @@ * When booting in 64-bit mode on 32-bit EFI firmware, startup_64_mixed_mode() * is the first thing that runs after switching to long mode. Depending on * whether the EFI handover protocol or the compat entry point was used to - * enter the kernel, it will either branch to the 64-bit EFI handover - * entrypoint at offset 0x390 in the image, or to the 64-bit EFI PE/COFF + * enter the kernel, it will either branch to the common 64-bit EFI stub + * entrypoint efi_stub_entry() directly, or via the 64-bit EFI PE/COFF * entrypoint efi_pe_entry(). In the former case, the bootloader must provide a * struct bootparams pointer as the third argument, so the presence of such a * pointer is used to disambiguate. @@ -37,21 +37,23 @@ * | efi32_pe_entry |---->| | | +-----------+--+ * +------------------+ | | +------+----------------+ | * | startup_32 |---->| startup_64_mixed_mode | | - * +------------------+ | | +------+----------------+ V - * | efi32_stub_entry |---->| | | +------------------+ - * +------------------+ +------------+ +---->| efi64_stub_entry | - * +-------------+----+ - * +------------+ +----------+ | - * | startup_64 |<----| efi_main |<--------------+ - * +------------+ +----------+ + * +------------------+ | | +------+----------------+ | + * | efi32_stub_entry |---->| | | | + * +------------------+ +------------+ | | + * V | + * +------------+ +----------------+ | + * | startup_64 |<----| efi_stub_entry |<--------+ + * +------------+ +----------------+ */ SYM_FUNC_START(startup_64_mixed_mode) lea efi32_boot_args(%rip), %rdx mov 0(%rdx), %edi mov 4(%rdx), %esi +#ifdef CONFIG_EFI_HANDOVER_PROTOCOL mov 8(%rdx), %edx // saved bootparams pointer test %edx, %edx - jnz efi64_stub_entry + jnz efi_stub_entry +#endif /* * efi_pe_entry uses MS calling convention, which requires 32 bytes of * shadow space on the stack even if all arguments are passed in @@ -138,6 +140,28 @@ SYM_FUNC_START(__efi64_thunk) SYM_FUNC_END(__efi64_thunk) .code32 +#ifdef CONFIG_EFI_HANDOVER_PROTOCOL +SYM_FUNC_START(efi32_stub_entry) + call 1f +1: popl %ecx + + /* Clear BSS */ + xorl %eax, %eax + leal (_bss - 1b)(%ecx), %edi + leal (_ebss - 1b)(%ecx), %ecx + subl %edi, %ecx + shrl $2, %ecx + cld + rep stosl + + add $0x4, %esp /* Discard return address */ + popl %ecx + popl %edx + popl %esi + jmp efi32_entry +SYM_FUNC_END(efi32_stub_entry) +#endif + /* * EFI service pointer must be in %edi. * @@ -218,7 +242,7 @@ SYM_FUNC_END(efi_enter32) * stub may still exit and return to the firmware using the Exit() EFI boot * service.] */ -SYM_FUNC_START(efi32_entry) +SYM_FUNC_START_LOCAL(efi32_entry) call 1f 1: pop %ebx @@ -245,10 +269,6 @@ SYM_FUNC_START(efi32_entry) jmp startup_32 SYM_FUNC_END(efi32_entry) -#define ST32_boottime 60 // offsetof(efi_system_table_32_t, boottime) -#define BS32_handle_protocol 88 // offsetof(efi_boot_services_32_t, handle_protocol) -#define LI32_image_base 32 // offsetof(efi_loaded_image_32_t, image_base) - /* * efi_status_t efi32_pe_entry(efi_handle_t image_handle, * efi_system_table_32_t *sys_table) @@ -256,8 +276,6 @@ SYM_FUNC_END(efi32_entry) SYM_FUNC_START(efi32_pe_entry) pushl %ebp movl %esp, %ebp - pushl %eax // dummy push to allocate loaded_image - pushl %ebx // save callee-save registers pushl %edi @@ -266,48 +284,8 @@ SYM_FUNC_START(efi32_pe_entry) movl $0x80000003, %eax // EFI_UNSUPPORTED jnz 2f - call 1f -1: pop %ebx - - /* Get the loaded image protocol pointer from the image handle */ - leal -4(%ebp), %eax - pushl %eax // &loaded_image - leal (loaded_image_proto - 1b)(%ebx), %eax - pushl %eax // pass the GUID address - pushl 8(%ebp) // pass the image handle - - /* - * Note the alignment of the stack frame. - * sys_table - * handle <-- 16-byte aligned on entry by ABI - * return address - * frame pointer - * loaded_image <-- local variable - * saved %ebx <-- 16-byte aligned here - * saved %edi - * &loaded_image - * &loaded_image_proto - * handle <-- 16-byte aligned for call to handle_protocol - */ - - movl 12(%ebp), %eax // sys_table - movl ST32_boottime(%eax), %eax // sys_table->boottime - call *BS32_handle_protocol(%eax) // sys_table->boottime->handle_protocol - addl $12, %esp // restore argument space - testl %eax, %eax - jnz 2f - movl 8(%ebp), %ecx // image_handle movl 12(%ebp), %edx // sys_table - movl -4(%ebp), %esi // loaded_image - movl LI32_image_base(%esi), %esi // loaded_image->image_base - leal (startup_32 - 1b)(%ebx), %ebp // runtime address of startup_32 - /* - * We need to set the image_offset variable here since startup_32() will - * use it before we get to the 64-bit efi_pe_entry() in C code. - */ - subl %esi, %ebp // calculate image_offset - movl %ebp, (image_offset - 1b)(%ebx) // save image_offset xorl %esi, %esi jmp efi32_entry // pass %ecx, %edx, %esi // no other registers remain live @@ -318,14 +296,13 @@ SYM_FUNC_START(efi32_pe_entry) RET SYM_FUNC_END(efi32_pe_entry) - .section ".rodata" - /* EFI loaded image protocol GUID */ - .balign 4 -SYM_DATA_START_LOCAL(loaded_image_proto) - .long 0x5b1b31a1 - .word 0x9562, 0x11d2 - .byte 0x8e, 0x3f, 0x00, 0xa0, 0xc9, 0x69, 0x72, 0x3b -SYM_DATA_END(loaded_image_proto) +#ifdef CONFIG_EFI_HANDOVER_PROTOCOL + .org efi32_stub_entry + 0x200 + .code64 +SYM_FUNC_START_NOALIGN(efi64_stub_entry) + jmp efi_handover_entry +SYM_FUNC_END(efi64_stub_entry) +#endif .data .balign 8 |