diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 69 |
1 files changed, 31 insertions, 38 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e98440371525..a2d3a5fbeeda 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -53,11 +53,15 @@ config X86 select HAVE_KERNEL_LZMA select HAVE_KERNEL_LZO select HAVE_HW_BREAKPOINT + select HAVE_MIXED_BREAKPOINTS_REGS select PERF_EVENTS select ANON_INODES select HAVE_ARCH_KMEMCHECK select HAVE_USER_RETURN_NOTIFIER +config INSTRUCTION_DECODER + def_bool (KPROBES || PERF_EVENTS) + config OUTPUT_FORMAT string default "elf32-i386" if X86_32 @@ -102,6 +106,9 @@ config ZONE_DMA config SBUS bool +config NEED_DMA_MAP_STATE + def_bool (X86_64 || DMAR || DMA_API_DEBUG) + config GENERIC_ISA_DMA def_bool y @@ -194,20 +201,17 @@ config HAVE_INTEL_TXT # Use the generic interrupt handling code in kernel/irq/: config GENERIC_HARDIRQS - bool - default y + def_bool y config GENERIC_HARDIRQS_NO__DO_IRQ def_bool y config GENERIC_IRQ_PROBE - bool - default y + def_bool y config GENERIC_PENDING_IRQ - bool + def_bool y depends on GENERIC_HARDIRQS && SMP - default y config USE_GENERIC_SMP_HELPERS def_bool y @@ -222,19 +226,22 @@ config X86_64_SMP depends on X86_64 && SMP config X86_HT - bool + def_bool y depends on SMP - default y config X86_TRAMPOLINE - bool + def_bool y depends on SMP || (64BIT && ACPI_SLEEP) - default y config X86_32_LAZY_GS def_bool y depends on X86_32 && !CC_STACKPROTECTOR +config ARCH_HWEIGHT_CFLAGS + string + default "-fcall-saved-ecx -fcall-saved-edx" if X86_32 + default "-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" if X86_64 + config KTIME_SCALAR def_bool X86_32 source "init/Kconfig" @@ -444,7 +451,7 @@ config X86_NUMAQ firmware with - send email to <Martin.Bligh@us.ibm.com>. config X86_SUPPORTS_MEMORY_FAILURE - bool + def_bool y # MCE code calls memory_failure(): depends on X86_MCE # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags: @@ -452,7 +459,6 @@ config X86_SUPPORTS_MEMORY_FAILURE # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: depends on X86_64 || !SPARSEMEM select ARCH_SUPPORTS_MEMORY_FAILURE - default y config X86_VISWS bool "SGI 320/540 (Visual Workstation)" @@ -567,7 +573,6 @@ config PARAVIRT_SPINLOCKS config PARAVIRT_CLOCK bool - default n endif @@ -659,7 +664,7 @@ config GART_IOMMU bool "GART IOMMU support" if EMBEDDED default y select SWIOTLB - depends on X86_64 && PCI + depends on X86_64 && PCI && K8_NB ---help--- Support for full DMA access of devices with 32bit memory access only on systems with more than 3GB. This is usually needed for USB, @@ -746,7 +751,6 @@ config MAXSMP bool "Configure Maximum number of SMP Processors and NUMA Nodes" depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL select CPUMASK_OFFSTACK - default n ---help--- Configure maximum number of CPUS and NUMA Nodes for this architecture. If unsure, say N. @@ -826,7 +830,6 @@ config X86_VISWS_APIC config X86_REROUTE_FOR_BROKEN_BOOT_IRQS bool "Reroute for broken boot IRQs" - default n depends on X86_IO_APIC ---help--- This option enables a workaround that fixes a source of @@ -873,9 +876,8 @@ config X86_MCE_AMD the DRAM Error Threshold. config X86_ANCIENT_MCE - def_bool n + bool "Support for old Pentium 5 / WinChip machine checks" depends on X86_32 && X86_MCE - prompt "Support for old Pentium 5 / WinChip machine checks" ---help--- Include support for machine check handling on old Pentium 5 or WinChip systems. These typically need to be enabled explicitely on the command @@ -883,8 +885,7 @@ config X86_ANCIENT_MCE config X86_MCE_THRESHOLD depends on X86_MCE_AMD || X86_MCE_INTEL - bool - default y + def_bool y config X86_MCE_INJECT depends on X86_MCE @@ -1023,8 +1024,8 @@ config X86_CPUID choice prompt "High Memory Support" - default HIGHMEM4G if !X86_NUMAQ default HIGHMEM64G if X86_NUMAQ + default HIGHMEM4G depends on X86_32 config NOHIGHMEM @@ -1213,8 +1214,8 @@ config NUMA_EMU config NODES_SHIFT int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP - range 1 9 - default "9" if MAXSMP + range 1 10 + default "10" if MAXSMP default "6" if X86_64 default "4" if X86_NUMAQ default "3" @@ -1282,7 +1283,7 @@ source "mm/Kconfig" config HIGHPTE bool "Allocate 3rd-level pagetables from highmem" - depends on X86_32 && (HIGHMEM4G || HIGHMEM64G) + depends on HIGHMEM ---help--- The VM uses one page table entry for each page of physical memory. For systems with a lot of RAM, this can be wasteful of precious @@ -1366,8 +1367,7 @@ config MATH_EMULATION kernel, it won't hurt. config MTRR - bool - default y + def_bool y prompt "MTRR (Memory Type Range Register) support" if EMBEDDED ---help--- On Intel P6 family processors (Pentium Pro, Pentium II and later) @@ -1433,8 +1433,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT mtrr_spare_reg_nr=N on the kernel command line. config X86_PAT - bool - default y + def_bool y prompt "x86 PAT support" if EMBEDDED depends on MTRR ---help--- @@ -1602,8 +1601,7 @@ config X86_NEED_RELOCS depends on X86_32 && RELOCATABLE config PHYSICAL_ALIGN - hex - prompt "Alignment value to which kernel should be aligned" if X86_32 + hex "Alignment value to which kernel should be aligned" if X86_32 default "0x1000000" range 0x2000 0x1000000 ---help--- @@ -1650,7 +1648,6 @@ config COMPAT_VDSO config CMDLINE_BOOL bool "Built-in kernel command line" - default n ---help--- Allow for specifying boot arguments to the kernel at build time. On some systems (e.g. embedded ones), it is @@ -1684,7 +1681,6 @@ config CMDLINE config CMDLINE_OVERRIDE bool "Built-in command line overrides boot loader arguments" - default n depends on CMDLINE_BOOL ---help--- Set this option to 'Y' to have the kernel ignore the boot loader @@ -1720,8 +1716,7 @@ source "drivers/acpi/Kconfig" source "drivers/sfi/Kconfig" config X86_APM_BOOT - bool - default y + def_bool y depends on APM || APM_MODULE menuconfig APM @@ -1950,8 +1945,7 @@ config DMAR_DEFAULT_ON experimental. config DMAR_BROKEN_GFX_WA - def_bool n - prompt "Workaround broken graphics drivers (going away soon)" + bool "Workaround broken graphics drivers (going away soon)" depends on DMAR && BROKEN ---help--- Current Graphics drivers tend to use physical address @@ -2049,7 +2043,6 @@ config SCx200HR_TIMER config OLPC bool "One Laptop Per Child support" select GPIOLIB - default n ---help--- Add support for detecting the unique features of the OLPC XO hardware. @@ -2058,7 +2051,7 @@ endif # X86_32 config K8_NB def_bool y - depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA))) + depends on CPU_SUP_AMD && PCI source "drivers/pcmcia/Kconfig" |