summaryrefslogtreecommitdiff
path: root/arch/tile
diff options
context:
space:
mode:
Diffstat (limited to 'arch/tile')
-rw-r--r--arch/tile/Kconfig12
-rw-r--r--arch/tile/include/asm/cacheflush.h52
-rw-r--r--arch/tile/include/asm/io.h15
-rw-r--r--arch/tile/include/asm/pci-bridge.h117
-rw-r--r--arch/tile/include/asm/pci.h107
-rw-r--r--arch/tile/include/asm/processor.h10
-rw-r--r--arch/tile/include/asm/signal.h2
-rw-r--r--arch/tile/include/hv/drv_xgbe_impl.h300
-rw-r--r--arch/tile/include/hv/drv_xgbe_intf.h615
-rw-r--r--arch/tile/include/hv/netio_errors.h122
-rw-r--r--arch/tile/include/hv/netio_intf.h2975
-rw-r--r--arch/tile/kernel/Makefile1
-rw-r--r--arch/tile/kernel/compat_signal.c6
-rw-r--r--arch/tile/kernel/intvec_32.S24
-rw-r--r--arch/tile/kernel/pci.c621
-rw-r--r--arch/tile/kernel/process.c8
-rw-r--r--arch/tile/kernel/setup.c2
-rw-r--r--arch/tile/kernel/signal.c10
-rw-r--r--arch/tile/lib/memchr_32.c35
-rw-r--r--arch/tile/lib/spinlock_32.c29
20 files changed, 4835 insertions, 228 deletions
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 07ec8a865c1d..e11b5fcb70eb 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -329,6 +329,18 @@ endmenu # Tilera-specific configuration
menu "Bus options"
+config PCI
+ bool "PCI support"
+ default y
+ select PCI_DOMAINS
+ ---help---
+ Enable PCI root complex support, so PCIe endpoint devices can
+ be attached to the Tile chip. Many, but not all, PCI devices
+ are supported under Tilera's root complex driver.
+
+config PCI_DOMAINS
+ bool
+
config NO_IOMEM
def_bool !PCI
diff --git a/arch/tile/include/asm/cacheflush.h b/arch/tile/include/asm/cacheflush.h
index c5741da4eeac..14a3f8556ace 100644
--- a/arch/tile/include/asm/cacheflush.h
+++ b/arch/tile/include/asm/cacheflush.h
@@ -137,4 +137,56 @@ static inline void finv_buffer(void *buffer, size_t size)
mb_incoherent();
}
+/*
+ * Flush & invalidate a VA range that is homed remotely on a single core,
+ * waiting until the memory controller holds the flushed values.
+ */
+static inline void finv_buffer_remote(void *buffer, size_t size)
+{
+ char *p;
+ int i;
+
+ /*
+ * Flush and invalidate the buffer out of the local L1/L2
+ * and request the home cache to flush and invalidate as well.
+ */
+ __finv_buffer(buffer, size);
+
+ /*
+ * Wait for the home cache to acknowledge that it has processed
+ * all the flush-and-invalidate requests. This does not mean
+ * that the flushed data has reached the memory controller yet,
+ * but it does mean the home cache is processing the flushes.
+ */
+ __insn_mf();
+
+ /*
+ * Issue a load to the last cache line, which can't complete
+ * until all the previously-issued flushes to the same memory
+ * controller have also completed. If we weren't striping
+ * memory, that one load would be sufficient, but since we may
+ * be, we also need to back up to the last load issued to
+ * another memory controller, which would be the point where
+ * we crossed an 8KB boundary (the granularity of striping
+ * across memory controllers). Keep backing up and doing this
+ * until we are before the beginning of the buffer, or have
+ * hit all the controllers.
+ */
+ for (i = 0, p = (char *)buffer + size - 1;
+ i < (1 << CHIP_LOG_NUM_MSHIMS()) && p >= (char *)buffer;
+ ++i) {
+ const unsigned long STRIPE_WIDTH = 8192;
+
+ /* Force a load instruction to issue. */
+ *(volatile char *)p;
+
+ /* Jump to end of previous stripe. */
+ p -= STRIPE_WIDTH;
+ p = (char *)((unsigned long)p | (STRIPE_WIDTH - 1));
+ }
+
+ /* Wait for the loads (and thus flushes) to have completed. */
+ __insn_mf();
+}
+
#endif /* _ASM_TILE_CACHEFLUSH_H */
diff --git a/arch/tile/include/asm/io.h b/arch/tile/include/asm/io.h
index ee43328713ab..d3cbb9b14cbe 100644
--- a/arch/tile/include/asm/io.h
+++ b/arch/tile/include/asm/io.h
@@ -55,9 +55,6 @@ extern void iounmap(volatile void __iomem *addr);
#define ioremap_writethrough(physaddr, size) ioremap(physaddr, size)
#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size)
-void __iomem *ioport_map(unsigned long port, unsigned int len);
-extern inline void ioport_unmap(void __iomem *addr) {}
-
#define mmiowb()
/* Conversion between virtual and physical mappings. */
@@ -189,12 +186,22 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
* we never run, uses them unconditionally.
*/
-static inline int ioport_panic(void)
+static inline long ioport_panic(void)
{
panic("inb/outb and friends do not exist on tile");
return 0;
}
+static inline void __iomem *ioport_map(unsigned long port, unsigned int len)
+{
+ return (void __iomem *) ioport_panic();
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+ ioport_panic();
+}
+
static inline u8 inb(unsigned long addr)
{
return ioport_panic();
diff --git a/arch/tile/include/asm/pci-bridge.h b/arch/tile/include/asm/pci-bridge.h
deleted file mode 100644
index e853b0e2793b..000000000000
--- a/arch/tile/include/asm/pci-bridge.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * Copyright 2010 Tilera Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation, version 2.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for
- * more details.
- */
-
-#ifndef _ASM_TILE_PCI_BRIDGE_H
-#define _ASM_TILE_PCI_BRIDGE_H
-
-#include <linux/ioport.h>
-#include <linux/pci.h>
-
-struct device_node;
-struct pci_controller;
-
-/*
- * pci_io_base returns the memory address at which you can access
- * the I/O space for PCI bus number `bus' (or NULL on error).
- */
-extern void __iomem *pci_bus_io_base(unsigned int bus);
-extern unsigned long pci_bus_io_base_phys(unsigned int bus);
-extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
-
-/* Allocate a new PCI host bridge structure */
-extern struct pci_controller *pcibios_alloc_controller(void);
-
-/* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
- unsigned long end, int flags, char *name);
-
-/* Get the PCI host controller for a bus */
-extern struct pci_controller *pci_bus_to_hose(int bus);
-
-/*
- * Structure of a PCI controller (host bridge)
- */
-struct pci_controller {
- int index; /* PCI domain number */
- struct pci_bus *root_bus;
-
- int first_busno;
- int last_busno;
-
- int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
- int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
-
- struct pci_ops *ops;
-
- int irq_base; /* Base IRQ from the Hypervisor */
- int plx_gen1; /* flag for PLX Gen 1 configuration */
-
- /* Address ranges that are routed to this controller/bridge. */
- struct resource mem_resources[3];
-};
-
-static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
-{
- return bus->sysdata;
-}
-
-extern void setup_indirect_pci_nomap(struct pci_controller *hose,
- void __iomem *cfg_addr, void __iomem *cfg_data);
-extern void setup_indirect_pci(struct pci_controller *hose,
- u32 cfg_addr, u32 cfg_data);
-extern void setup_grackle(struct pci_controller *hose);
-
-extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
-
-/*
- * The following code swizzles for exactly one bridge. The routine
- * common_swizzle below handles multiple bridges. But there are a
- * some boards that don't follow the PCI spec's suggestion so we
- * break this piece out separately.
- */
-static inline unsigned char bridge_swizzle(unsigned char pin,
- unsigned char idsel)
-{
- return (((pin-1) + idsel) % 4) + 1;
-}
-
-/*
- * The following macro is used to lookup irqs in a standard table
- * format for those PPC systems that do not already have PCI
- * interrupts properly routed.
- */
-/* FIXME - double check this */
-#define PCI_IRQ_TABLE_LOOKUP ({ \
- long _ctl_ = -1; \
- if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
- _ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
- _ctl_; \
-})
-
-/*
- * Scan the buses below a given PCI host bridge and assign suitable
- * resources to all devices found.
- */
-extern int pciauto_bus_scan(struct pci_controller *, int);
-
-#ifdef CONFIG_PCI
-extern unsigned long pci_address_to_pio(phys_addr_t address);
-#else
-static inline unsigned long pci_address_to_pio(phys_addr_t address)
-{
- return (unsigned long)-1;
-}
-#endif
-
-#endif /* _ASM_TILE_PCI_BRIDGE_H */
diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h
index b0c15da2d5d5..c3fc458a0d32 100644
--- a/arch/tile/include/asm/pci.h
+++ b/arch/tile/include/asm/pci.h
@@ -15,7 +15,29 @@
#ifndef _ASM_TILE_PCI_H
#define _ASM_TILE_PCI_H
-#include <asm/pci-bridge.h>
+#include <linux/pci.h>
+
+/*
+ * Structure of a PCI controller (host bridge)
+ */
+struct pci_controller {
+ int index; /* PCI domain number */
+ struct pci_bus *root_bus;
+
+ int first_busno;
+ int last_busno;
+
+ int hv_cfg_fd[2]; /* config{0,1} fds for this PCIe controller */
+ int hv_mem_fd; /* fd to Hypervisor for MMIO operations */
+
+ struct pci_ops *ops;
+
+ int irq_base; /* Base IRQ from the Hypervisor */
+ int plx_gen1; /* flag for PLX Gen 1 configuration */
+
+ /* Address ranges that are routed to this controller/bridge. */
+ struct resource mem_resources[3];
+};
/*
* The hypervisor maps the entirety of CPA-space as bus addresses, so
@@ -24,56 +46,12 @@
*/
#define PCI_DMA_BUS_IS_PHYS 1
-struct pci_controller *pci_bus_to_hose(int bus);
-unsigned char __init common_swizzle(struct pci_dev *dev, unsigned char *pinp);
int __init tile_pci_init(void);
-void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
-void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
-void __devinit pcibios_fixup_bus(struct pci_bus *bus);
-int __devinit _tile_cfg_read(struct pci_controller *hose,
- int bus,
- int slot,
- int function,
- int offset,
- int size,
- u32 *val);
-int __devinit _tile_cfg_write(struct pci_controller *hose,
- int bus,
- int slot,
- int function,
- int offset,
- int size,
- u32 val);
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
+static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {}
-/*
- * These are used to to config reads and writes in the early stages of
- * setup before the driver infrastructure has been set up enough to be
- * able to do config reads and writes.
- */
-#define early_cfg_read(where, size, value) \
- _tile_cfg_read(controller, \
- current_bus, \
- pci_slot, \
- pci_fn, \
- where, \
- size, \
- value)
-
-#define early_cfg_write(where, size, value) \
- _tile_cfg_write(controller, \
- current_bus, \
- pci_slot, \
- pci_fn, \
- where, \
- size, \
- value)
-
-
-
-#define PCICFG_BYTE 1
-#define PCICFG_WORD 2
-#define PCICFG_DWORD 4
+void __devinit pcibios_fixup_bus(struct pci_bus *bus);
#define TILE_NUM_PCIE 2
@@ -88,33 +66,33 @@ static inline int pci_proc_domain(struct pci_bus *bus)
}
/*
- * I/O space is currently not supported.
+ * pcibios_assign_all_busses() tells whether or not the bus numbers
+ * should be reassigned, in case the BIOS didn't do it correctly, or
+ * in case we don't have a BIOS and we want to let Linux do it.
*/
+static inline int pcibios_assign_all_busses(void)
+{
+ return 1;
+}
-#define TILE_PCIE_LOWER_IO 0x0
-#define TILE_PCIE_UPPER_IO 0x10000
-#define TILE_PCIE_PCIE_IO_SIZE 0x0000FFFF
-
-#define _PAGE_NO_CACHE 0
-#define _PAGE_GUARDED 0
-
-
-#define pcibios_assign_all_busses() pci_assign_all_buses
-extern int pci_assign_all_buses;
-
+/*
+ * No special bus mastering setup handling.
+ */
static inline void pcibios_set_master(struct pci_dev *dev)
{
- /* No special bus mastering setup handling */
}
#define PCIBIOS_MIN_MEM 0
-#define PCIBIOS_MIN_IO TILE_PCIE_LOWER_IO
+#define PCIBIOS_MIN_IO 0
/*
* This flag tells if the platform is TILEmpower that needs
* special configuration for the PLX switch chip.
*/
-extern int blade_pci;
+extern int tile_plx_gen1;
+
+/* Use any cpu for PCI. */
+#define cpumask_of_pcibus(bus) cpu_online_mask
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
@@ -122,7 +100,4 @@ extern int blade_pci;
/* generic pci stuff */
#include <asm-generic/pci.h>
-/* Use any cpu for PCI. */
-#define cpumask_of_pcibus(bus) cpu_online_mask
-
#endif /* _ASM_TILE_PCI_H */
diff --git a/arch/tile/include/asm/processor.h b/arch/tile/include/asm/processor.h
index 1747ff3946b2..a9e7c8760334 100644
--- a/arch/tile/include/asm/processor.h
+++ b/arch/tile/include/asm/processor.h
@@ -292,8 +292,18 @@ extern int kstack_hash;
/* Are we using huge pages in the TLB for kernel data? */
extern int kdata_huge;
+/* Support standard Linux prefetching. */
+#define ARCH_HAS_PREFETCH
+#define prefetch(x) __builtin_prefetch(x)
#define PREFETCH_STRIDE CHIP_L2_LINE_SIZE()
+/* Bring a value into the L1D, faulting the TLB if necessary. */
+#ifdef __tilegx__
+#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))
+#else
+#define prefetch_L1(x) __insn_prefetch_L1((void *)(x))
+#endif
+
#else /* __ASSEMBLY__ */
/* Do some slow action (e.g. read a slow SPR). */
diff --git a/arch/tile/include/asm/signal.h b/arch/tile/include/asm/signal.h
index c1ee1d61d44c..81d92a45cd4b 100644
--- a/arch/tile/include/asm/signal.h
+++ b/arch/tile/include/asm/signal.h
@@ -25,7 +25,7 @@
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
struct pt_regs;
-int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
+int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
void do_signal(struct pt_regs *regs);
#endif
diff --git a/arch/tile/include/hv/drv_xgbe_impl.h b/arch/tile/include/hv/drv_xgbe_impl.h
new file mode 100644
index 000000000000..3a73b2b44913
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_impl.h
@@ -0,0 +1,300 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file drivers/xgbe/impl.h
+ * Implementation details for the NetIO library.
+ */
+
+#ifndef __DRV_XGBE_IMPL_H__
+#define __DRV_XGBE_IMPL_H__
+
+#include <hv/netio_errors.h>
+#include <hv/netio_intf.h>
+#include <hv/drv_xgbe_intf.h>
+
+
+/** How many groups we have (log2). */
+#define LOG2_NUM_GROUPS (12)
+/** How many groups we have. */
+#define NUM_GROUPS (1 << LOG2_NUM_GROUPS)
+
+/** Number of output requests we'll buffer per tile. */
+#define EPP_REQS_PER_TILE (32)
+
+/** Words used in an eDMA command without checksum acceleration. */
+#define EDMA_WDS_NO_CSUM 8
+/** Words used in an eDMA command with checksum acceleration. */
+#define EDMA_WDS_CSUM 10
+/** Total available words in the eDMA command FIFO. */
+#define EDMA_WDS_TOTAL 128
+
+
+/*
+ * FIXME: These definitions are internal and should have underscores!
+ * NOTE: The actual numeric values here are intentional and allow us to
+ * optimize the concept "if small ... else if large ... else ...", by
+ * checking for the low bit being set, and then for non-zero.
+ * These are used as array indices, so they must have the values (0, 1, 2)
+ * in some order.
+ */
+#define SIZE_SMALL (1) /**< Small packet queue. */
+#define SIZE_LARGE (2) /**< Large packet queue. */
+#define SIZE_JUMBO (0) /**< Jumbo packet queue. */
+
+/** The number of "SIZE_xxx" values. */
+#define NETIO_NUM_SIZES 3
+
+
+/*
+ * Default numbers of packets for IPP drivers. These values are chosen
+ * such that CIPP1 will not overflow its L2 cache.
+ */
+
+/** The default number of small packets. */
+#define NETIO_DEFAULT_SMALL_PACKETS 2750
+/** The default number of large packets. */
+#define NETIO_DEFAULT_LARGE_PACKETS 2500
+/** The default number of jumbo packets. */
+#define NETIO_DEFAULT_JUMBO_PACKETS 250
+
+
+/** Log2 of the size of a memory arena. */
+#define NETIO_ARENA_SHIFT 24 /* 16 MB */
+/** Size of a memory arena. */
+#define NETIO_ARENA_SIZE (1 << NETIO_ARENA_SHIFT)
+
+
+/** A queue of packets.
+ *
+ * This structure partially defines a queue of packets waiting to be
+ * processed. The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler. The other part of the queue state, the read offset, is
+ * kept in user space, not in hypervisor space, so it is in a separate data
+ * structure.
+ *
+ * The read offset (__packet_receive_read in the user part of the queue
+ * structure) points to the next packet to be read. When the read offset is
+ * equal to the write offset, the queue is empty; therefore the queue must
+ * contain one more slot than the required maximum queue size.
+ *
+ * Here's an example of all 3 state variables and what they mean. All
+ * pointers move left to right.
+ *
+ * @code
+ * I I V V V V I I I I
+ * 0 1 2 3 4 5 6 7 8 9 10
+ * ^ ^ ^ ^
+ * | | |
+ * | | __last_packet_plus_one
+ * | __buffer_write
+ * __packet_receive_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 packets (_last_packet_plus_one
+ * = 10). The read pointer is at 2, and the write pointer is at 6; thus,
+ * there are valid, unread packets in slots 2, 3, 4, and 5. The remaining
+ * slots are invalid (do not contain a packet).
+ */
+typedef struct {
+ /** Byte offset of the next notify packet to be written: zero for the first
+ * packet on the queue, sizeof (netio_pkt_t) for the second packet on the
+ * queue, etc. */
+ volatile uint32_t __packet_write;
+
+ /** Offset of the packet after the last valid packet (i.e., when any
+ * pointer is incremented to this value, it wraps back to zero). */
+ uint32_t __last_packet_plus_one;
+}
+__netio_packet_queue_t;
+
+
+/** A queue of buffers.
+ *
+ * This structure partially defines a queue of empty buffers which have been
+ * obtained via requests to the IPP. (The elements of the queue are packet
+ * handles, which are transformed into a full netio_pkt_t when the buffer is
+ * retrieved.) The queue as a whole is written to by an interrupt handler and
+ * read by non-interrupt code; this data structure is what's touched by the
+ * interrupt handler. The other parts of the queue state, the read offset and
+ * requested write offset, are kept in user space, not in hypervisor space, so
+ * they are in a separate data structure.
+ *
+ * The read offset (__buffer_read in the user part of the queue structure)
+ * points to the next buffer to be read. When the read offset is equal to the
+ * write offset, the queue is empty; therefore the queue must contain one more
+ * slot than the required maximum queue size.
+ *
+ * The requested write offset (__buffer_requested_write in the user part of
+ * the queue structure) points to the slot which will hold the next buffer we
+ * request from the IPP, once we get around to sending such a request. When
+ * the requested write offset is equal to the write offset, no requests for
+ * new buffers are outstanding; when the requested write offset is one greater
+ * than the read offset, no more requests may be sent.
+ *
+ * Note that, unlike the packet_queue, the buffer_queue places incoming
+ * buffers at decreasing addresses. This makes the check for "is it time to
+ * wrap the buffer pointer" cheaper in the assembly code which receives new
+ * buffers, and means that the value which defines the queue size,
+ * __last_buffer, is different than in the packet queue. Also, the offset
+ * used in the packet_queue is already scaled by the size of a packet; here we
+ * use unscaled slot indices for the offsets. (These differences are
+ * historical, and in the future it's possible that the packet_queue will look
+ * more like this queue.)
+ *
+ * @code
+ * Here's an example of all 4 state variables and what they mean. Remember:
+ * all pointers move right to left.
+ *
+ * V V V I I R R V V V
+ * 0 1 2 3 4 5 6 7 8 9
+ * ^ ^ ^ ^
+ * | | | |
+ * | | | __last_buffer
+ * | | __buffer_write
+ * | __buffer_requested_write
+ * __buffer_read
+ * @endcode
+ *
+ * This queue has 10 slots, and thus can hold 9 buffers (_last_buffer = 9).
+ * The read pointer is at 2, and the write pointer is at 6; thus, there are
+ * valid, unread buffers in slots 2, 1, 0, 9, 8, and 7. The requested write
+ * pointer is at 4; thus, requests have been made to the IPP for buffers which
+ * will be placed in slots 6 and 5 when they arrive. Finally, the remaining
+ * slots are invalid (do not contain a buffer).
+ */
+typedef struct
+{
+ /** Ordinal number of the next buffer to be written: 0 for the first slot in
+ * the queue, 1 for the second slot in the queue, etc. */
+ volatile uint32_t __buffer_write;
+
+ /** Ordinal number of the last buffer (i.e., when any pointer is decremented
+ * below zero, it is reloaded with this value). */
+ uint32_t __last_buffer;
+}
+__netio_buffer_queue_t;
+
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+typedef struct __netio_queue_impl_t
+{
+ /** The queue of packets waiting to be received. */
+ __netio_packet_queue_t __packet_receive_queue;
+ /** The intr bit mask that IDs this device. */
+ unsigned int __intr_id;
+ /** Offset to queues of empty buffers, one per size. */
+ uint32_t __buffer_queue[NETIO_NUM_SIZES];
+ /** The address of the first EPP tile, or -1 if no EPP. */
+ /* ISSUE: Actually this is always "0" or "~0". */
+ uint32_t __epp_location;
+ /** The queue ID that this queue represents. */
+ unsigned int __queue_id;
+ /** Number of acknowledgements received. */
+ volatile uint32_t __acks_received;
+ /** Last completion number received for packet_sendv. */
+ volatile uint32_t __last_completion_rcv;
+ /** Number of packets allowed to be outstanding. */
+ uint32_t __max_outstanding;
+ /** First VA available for packets. */
+ void* __va_0;
+ /** First VA in second range available for packets. */
+ void* __va_1;
+ /** Padding to align the "__packets" field to the size of a netio_pkt_t. */
+ uint32_t __padding[3];
+ /** The packets themselves. */
+ netio_pkt_t __packets[0];
+}
+netio_queue_impl_t;
+
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+typedef struct __netio_queue_user_impl_t
+{
+ /** The next incoming packet to be read. */
+ uint32_t __packet_receive_read;
+ /** The next empty buffers to be read, one index per size. */
+ uint8_t __buffer_read[NETIO_NUM_SIZES];
+ /** Where the empty buffer we next request from the IPP will go, one index
+ * per size. */
+ uint8_t __buffer_requested_write[NETIO_NUM_SIZES];
+ /** PCIe interface flag. */
+ uint8_t __pcie;
+ /** Number of packets left to be received before we send a credit update. */
+ uint32_t __receive_credit_remaining;
+ /** Value placed in __receive_credit_remaining when it reaches zero. */
+ uint32_t __receive_credit_interval;
+ /** First fast I/O routine index. */
+ uint32_t __fastio_index;
+ /** Number of acknowledgements expected. */
+ uint32_t __acks_outstanding;
+ /** Last completion number requested. */
+ uint32_t __last_completion_req;
+ /** File descriptor for driver. */
+ int __fd;
+}
+netio_queue_user_impl_t;
+
+
+#define NETIO_GROUP_CHUNK_SIZE 64 /**< Max # groups in one IPP request */
+#define NETIO_BUCKET_CHUNK_SIZE 64 /**< Max # buckets in one IPP request */
+
+
+/** Internal structure used to convey packet send information to the
+ * hypervisor. FIXME: Actually, it's not used for that anymore, but
+ * netio_packet_send() still uses it internally.
+ */
+typedef struct
+{
+ uint16_t flags; /**< Packet flags (__NETIO_SEND_FLG_xxx) */
+ uint16_t transfer_size; /**< Size of packet */
+ uint32_t va; /**< VA of start of packet */
+ __netio_pkt_handle_t handle; /**< Packet handle */
+ uint32_t csum0; /**< First checksum word */
+ uint32_t csum1; /**< Second checksum word */
+}
+__netio_send_cmd_t;
+
+
+/** Flags used in two contexts:
+ * - As the "flags" member in the __netio_send_cmd_t, above; used only
+ * for netio_pkt_send_{prepare,commit}.
+ * - As part of the flags passed to the various send packet fast I/O calls.
+ */
+
+/** Need acknowledgement on this packet. Note that some code in the
+ * normal send_pkt fast I/O handler assumes that this is equal to 1. */
+#define __NETIO_SEND_FLG_ACK 0x1
+
+/** Do checksum on this packet. (Only used with the __netio_send_cmd_t;
+ * normal packet sends use a special fast I/O index to denote checksumming,
+ * and multi-segment sends test the checksum descriptor.) */
+#define __NETIO_SEND_FLG_CSUM 0x2
+
+/** Get a completion on this packet. Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_COMPLETION 0x4
+
+/** Position of the number-of-extra-segments value in the flags word.
+ Only used with multi-segment sends. */
+#define __NETIO_SEND_FLG_XSEG_SHIFT 3
+
+/** Width of the number-of-extra-segments value in the flags word. */
+#define __NETIO_SEND_FLG_XSEG_WIDTH 2
+
+#endif /* __DRV_XGBE_IMPL_H__ */
diff --git a/arch/tile/include/hv/drv_xgbe_intf.h b/arch/tile/include/hv/drv_xgbe_intf.h
new file mode 100644
index 000000000000..146e47d5334b
--- /dev/null
+++ b/arch/tile/include/hv/drv_xgbe_intf.h
@@ -0,0 +1,615 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * @file drv_xgbe_intf.h
+ * Interface to the hypervisor XGBE driver.
+ */
+
+#ifndef __DRV_XGBE_INTF_H__
+#define __DRV_XGBE_INTF_H__
+
+/**
+ * An object for forwarding VAs and PAs to the hypervisor.
+ * @ingroup types
+ *
+ * This allows the supervisor to specify a number of areas of memory to
+ * store packet buffers.
+ */
+typedef struct
+{
+ /** The physical address of the memory. */
+ HV_PhysAddr pa;
+ /** Page table entry for the memory. This is only used to derive the
+ * memory's caching mode; the PA bits are ignored. */
+ HV_PTE pte;
+ /** The virtual address of the memory. */
+ HV_VirtAddr va;
+ /** Size (in bytes) of the memory area. */
+ int size;
+
+}
+netio_ipp_address_t;
+
+/** The various pread/pwrite offsets into the hypervisor-level driver.
+ * @ingroup types
+ */
+typedef enum
+{
+ /** Inform the Linux driver of the address of the NetIO arena memory.
+ * This offset is actually only used to convey information from netio
+ * to the Linux driver; it never makes it from there to the hypervisor.
+ * Write-only; takes a uint32_t specifying the VA address. */
+ NETIO_FIXED_ADDR = 0x5000000000000000ULL,
+
+ /** Inform the Linux driver of the size of the NetIO arena memory.
+ * This offset is actually only used to convey information from netio
+ * to the Linux driver; it never makes it from there to the hypervisor.
+ * Write-only; takes a uint32_t specifying the VA size. */
+ NETIO_FIXED_SIZE = 0x5100000000000000ULL,
+
+ /** Register current tile with IPP. Write then read: write, takes a
+ * netio_input_config_t, read returns a pointer to a netio_queue_impl_t. */
+ NETIO_IPP_INPUT_REGISTER_OFF = 0x6000000000000000ULL,
+
+ /** Unregister current tile from IPP. Write-only, takes a dummy argument. */
+ NETIO_IPP_INPUT_UNREGISTER_OFF = 0x6100000000000000ULL,
+
+ /** Start packets flowing. Write-only, takes a dummy argument. */
+ NETIO_IPP_INPUT_INIT_OFF = 0x6200000000000000ULL,
+
+ /** Stop packets flowing. Write-only, takes a dummy argument. */
+ NETIO_IPP_INPUT_UNINIT_OFF = 0x6300000000000000ULL,
+
+ /** Configure group (typically we group on VLAN). Write-only: takes an
+ * array of netio_group_t's, low 24 bits of the offset is the base group
+ * number times the size of a netio_group_t. */
+ NETIO_IPP_INPUT_GROUP_CFG_OFF = 0x6400000000000000ULL,
+
+ /** Configure bucket. Write-only: takes an array of netio_bucket_t's, low
+ * 24 bits of the offset is the base bucket number times the size of a
+ * netio_bucket_t. */
+ NETIO_IPP_INPUT_BUCKET_CFG_OFF = 0x6500000000000000ULL,
+
+ /** Get/set a parameter. Read or write: read or write data is the parameter
+ * value, low 32 bits of the offset is a __netio_getset_offset_t. */
+ NETIO_IPP_PARAM_OFF = 0x6600000000000000ULL,
+
+ /** Get fast I/O index. Read-only; returns a 4-byte base index value. */
+ NETIO_IPP_GET_FASTIO_OFF = 0x6700000000000000ULL,
+
+ /** Configure hijack IP address. Packets with this IPv4 dest address
+ * go to bucket NETIO_NUM_BUCKETS - 1. Write-only: takes an IP address
+ * in some standard form. FIXME: Define the form! */
+ NETIO_IPP_INPUT_HIJACK_CFG_OFF = 0x6800000000000000ULL,
+
+ /**
+ * Offsets beyond this point are reserved for the supervisor (although that
+ * enforcement must be done by the supervisor driver itself).
+ */
+ NETIO_IPP_USER_MAX_OFF = 0x6FFFFFFFFFFFFFFFULL,
+
+ /** Register I/O memory. Write-only, takes a netio_ipp_address_t. */
+ NETIO_IPP_IOMEM_REGISTER_OFF = 0x7000000000000000ULL,
+
+ /** Unregister I/O memory. Write-only, takes a netio_ipp_address_t. */
+ NETIO_IPP_IOMEM_UNREGISTER_OFF = 0x7100000000000000ULL,
+
+ /* Offsets greater than 0x7FFFFFFF can't be used directly from Linux
+ * userspace code due to limitations in the pread/pwrite syscalls. */
+
+ /** Drain LIPP buffers. */
+ NETIO_IPP_DRAIN_OFF = 0xFA00000000000000ULL,
+
+ /** Supply a netio_ipp_address_t to be used as shared memory for the
+ * LEPP command queue. */
+ NETIO_EPP_SHM_OFF = 0xFB00000000000000ULL,
+
+ /* 0xFC... is currently unused. */
+
+ /** Stop IPP/EPP tiles. Write-only, takes a dummy argument. */
+ NETIO_IPP_STOP_SHIM_OFF = 0xFD00000000000000ULL,
+
+ /** Start IPP/EPP tiles. Write-only, takes a dummy argument. */
+ NETIO_IPP_START_SHIM_OFF = 0xFE00000000000000ULL,
+
+ /** Supply packet arena. Write-only, takes an array of
+ * netio_ipp_address_t values. */
+ NETIO_IPP_ADDRESS_OFF = 0xFF00000000000000ULL,
+} netio_hv_offset_t;
+
+/** Extract the base offset from an offset */
+#define NETIO_BASE_OFFSET(off) ((off) & 0xFF00000000000000ULL)
+/** Extract the local offset from an offset */
+#define NETIO_LOCAL_OFFSET(off) ((off) & 0x00FFFFFFFFFFFFFFULL)
+
+
+/**
+ * Get/set offset.
+ */
+typedef union
+{
+ struct
+ {
+ uint64_t addr:48; /**< Class-specific address */
+ unsigned int class:8; /**< Class (e.g., NETIO_PARAM) */
+ unsigned int opcode:8; /**< High 8 bits of NETIO_IPP_PARAM_OFF */
+ }
+ bits; /**< Bitfields */
+ uint64_t word; /**< Aggregated value to use as the offset */
+}
+__netio_getset_offset_t;
+
+/**
+ * Fast I/O index offsets (must be contiguous).
+ */
+typedef enum
+{
+ NETIO_FASTIO_ALLOCATE = 0, /**< Get empty packet buffer */
+ NETIO_FASTIO_FREE_BUFFER = 1, /**< Give buffer back to IPP */
+ NETIO_FASTIO_RETURN_CREDITS = 2, /**< Give credits to IPP */
+ NETIO_FASTIO_SEND_PKT_NOCK = 3, /**< Send a packet, no checksum */
+ NETIO_FASTIO_SEND_PKT_CK = 4, /**< Send a packet, with checksum */
+ NETIO_FASTIO_SEND_PKT_VEC = 5, /**< Send a vector of packets */
+ NETIO_FASTIO_SENDV_PKT = 6, /**< Sendv one packet */
+ NETIO_FASTIO_NUM_INDEX = 7, /**< Total number of fast I/O indices */
+} netio_fastio_index_t;
+
+/** 3-word return type for Fast I/O call. */
+typedef struct
+{
+ int err; /**< Error code. */
+ uint32_t val0; /**< Value. Meaning depends upon the specific call. */
+ uint32_t val1; /**< Value. Meaning depends upon the specific call. */
+} netio_fastio_rv3_t;
+
+/** 0-argument fast I/O call */
+int __netio_fastio0(uint32_t fastio_index);
+/** 1-argument fast I/O call */
+int __netio_fastio1(uint32_t fastio_index, uint32_t arg0);
+/** 3-argument fast I/O call, 2-word return value */
+netio_fastio_rv3_t __netio_fastio3_rv3(uint32_t fastio_index, uint32_t arg0,
+ uint32_t arg1, uint32_t arg2);
+/** 4-argument fast I/O call */
+int __netio_fastio4(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3);
+/** 6-argument fast I/O call */
+int __netio_fastio6(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5);
+/** 9-argument fast I/O call */
+int __netio_fastio9(uint32_t fastio_index, uint32_t arg0, uint32_t arg1,
+ uint32_t arg2, uint32_t arg3, uint32_t arg4, uint32_t arg5,
+ uint32_t arg6, uint32_t arg7, uint32_t arg8);
+
+/** Allocate an empty packet.
+ * @param fastio_index Fast I/O index.
+ * @param size Size of the packet to allocate.
+ */
+#define __netio_fastio_allocate(fastio_index, size) \
+ __netio_fastio1((fastio_index) + NETIO_FASTIO_ALLOCATE, size)
+
+/** Free a buffer.
+ * @param fastio_index Fast I/O index.
+ * @param handle Handle for the packet to free.
+ */
+#define __netio_fastio_free_buffer(fastio_index, handle) \
+ __netio_fastio1((fastio_index) + NETIO_FASTIO_FREE_BUFFER, handle)
+
+/** Increment our receive credits.
+ * @param fastio_index Fast I/O index.
+ * @param credits Number of credits to add.
+ */
+#define __netio_fastio_return_credits(fastio_index, credits) \
+ __netio_fastio1((fastio_index) + NETIO_FASTIO_RETURN_CREDITS, credits)
+
+/** Send packet, no checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ */
+#define __netio_fastio_send_pkt_nock(fastio_index, ackflag, size, va, handle) \
+ __netio_fastio4((fastio_index) + NETIO_FASTIO_SEND_PKT_NOCK, ackflag, \
+ size, va, handle)
+
+/** Send packet, calculate checksum.
+ * @param fastio_index Fast I/O index.
+ * @param ackflag Nonzero if we want an ack.
+ * @param size Size of the packet.
+ * @param va Virtual address of start of packet.
+ * @param handle Packet handle.
+ * @param csum0 Shim checksum header.
+ * @param csum1 Checksum seed.
+ */
+#define __netio_fastio_send_pkt_ck(fastio_index, ackflag, size, va, handle, \
+ csum0, csum1) \
+ __netio_fastio6((fastio_index) + NETIO_FASTIO_SEND_PKT_CK, ackflag, \
+ size, va, handle, csum0, csum1)
+
+
+/** Format for the "csum0" argument to the __netio_fastio_send routines
+ * and LEPP. Note that this is currently exactly identical to the
+ * ShimProtocolOffloadHeader.
+ */
+typedef union
+{
+ struct
+ {
+ unsigned int start_byte:7; /**< The first byte to be checksummed */
+ unsigned int count:14; /**< Number of bytes to be checksummed. */
+ unsigned int destination_byte:7; /**< The byte to write the checksum to. */
+ unsigned int reserved:4; /**< Reserved. */
+ } bits; /**< Decomposed method of access. */
+ unsigned int word; /**< To send out the IDN. */
+} __netio_checksum_header_t;
+
+
+/** Sendv packet with 1 or 2 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ * 1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment, if 2 segments.
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ * segment, if 2 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_1_2(fastio_index, flags, confno, csum0, \
+ va_F, va_L, len_F_L) \
+ __netio_fastio6((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+ csum0, va_F, va_L, len_F_L)
+
+/** Send packet on PCIe interface.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; Hard wired 0, not needed for PCIe.
+ * @param va_F Virtual address of the packet buffer.
+ * @param va_L Virtual address of last segment, if 2 segments. Hard wired 0.
+ * @param len_F_L Length of the packet buffer in low 16 bits.
+ */
+#define __netio_fastio_send_pcie_pkt(fastio_index, flags, confno, csum0, \
+ va_F, va_L, len_F_L) \
+ __netio_fastio6((fastio_index) + PCIE_FASTIO_SENDV_PKT, flags, confno, \
+ csum0, va_F, va_L, len_F_L)
+
+/** Sendv packet with 3 or 4 segments.
+ * @param fastio_index Fast I/O index.
+ * @param flags Ack/csum/notify flags in low 3 bits; number of segments minus
+ * 1 in next 2 bits; expected checksum in high 16 bits.
+ * @param confno Confirmation number to request, if notify flag set.
+ * @param csum0 Checksum descriptor; if zero, no checksum.
+ * @param va_F Virtual address of first segment.
+ * @param va_L Virtual address of last segment (third segment if 3 segments,
+ * fourth segment if 4 segments).
+ * @param len_F_L Length of first segment in low 16 bits; length of last
+ * segment in high 16 bits.
+ * @param va_M0 Virtual address of "middle 0" segment; this segment is sent
+ * second when there are three segments, and third if there are four.
+ * @param va_M1 Virtual address of "middle 1" segment; this segment is sent
+ * second when there are four segments.
+ * @param len_M0_M1 Length of middle 0 segment in low 16 bits; length of middle
+ * 1 segment, if 4 segments, in high 16 bits.
+ */
+#define __netio_fastio_sendv_pkt_3_4(fastio_index, flags, confno, csum0, va_F, \
+ va_L, len_F_L, va_M0, va_M1, len_M0_M1) \
+ __netio_fastio9((fastio_index) + NETIO_FASTIO_SENDV_PKT, flags, confno, \
+ csum0, va_F, va_L, len_F_L, va_M0, va_M1, len_M0_M1)
+
+/** Send vector of packets.
+ * @param fastio_index Fast I/O index.
+ * @param seqno Number of packets transmitted so far on this interface;
+ * used to decide which packets should be acknowledged.
+ * @param nentries Number of entries in vector.
+ * @param va Virtual address of start of vector entry array.
+ * @return 3-word netio_fastio_rv3_t structure. The structure's err member
+ * is an error code, or zero if no error. The val0 member is the
+ * updated value of seqno; it has been incremented by 1 for each
+ * packet sent. That increment may be less than nentries if an
+ * error occured, or if some of the entries in the vector contain
+ * handles equal to NETIO_PKT_HANDLE_NONE. The val1 member is the
+ * updated value of nentries; it has been decremented by 1 for each
+ * vector entry processed. Again, that decrement may be less than
+ * nentries (leaving the returned value positive) if an error
+ * occurred.
+ */
+#define __netio_fastio_send_pkt_vec(fastio_index, seqno, nentries, va) \
+ __netio_fastio3_rv3((fastio_index) + NETIO_FASTIO_SEND_PKT_VEC, seqno, \
+ nentries, va)
+
+
+/** An egress DMA command for LEPP. */
+typedef struct
+{
+ /** Is this a TSO transfer?
+ *
+ * NOTE: This field is always 0, to distinguish it from
+ * lepp_tso_cmd_t. It must come first!
+ */
+ uint8_t tso : 1;
+
+ /** Unused padding bits. */
+ uint8_t _unused : 3;
+
+ /** Should this packet be sent directly from caches instead of DRAM,
+ * using hash-for-home to locate the packet data?
+ */
+ uint8_t hash_for_home : 1;
+
+ /** Should we compute a checksum? */
+ uint8_t compute_checksum : 1;
+
+ /** Is this the final buffer for this packet?
+ *
+ * A single packet can be split over several input buffers (a "gather"
+ * operation). This flag indicates that this is the last buffer
+ * in a packet.
+ */
+ uint8_t end_of_packet : 1;
+
+ /** Should LEPP advance 'comp_busy' when this DMA is fully finished? */
+ uint8_t send_completion : 1;
+
+ /** High bits of Client Physical Address of the start of the buffer
+ * to be egressed.
+ *
+ * NOTE: Only 6 bits are actually needed here, as CPAs are
+ * currently 38 bits. So two bits could be scavenged from this.
+ */
+ uint8_t cpa_hi;
+
+ /** The number of bytes to be egressed. */
+ uint16_t length;
+
+ /** Low 32 bits of Client Physical Address of the start of the buffer
+ * to be egressed.
+ */
+ uint32_t cpa_lo;
+
+ /** Checksum information (only used if 'compute_checksum'). */
+ __netio_checksum_header_t checksum_data;
+
+} lepp_cmd_t;
+
+
+/** A chunk of physical memory for a TSO egress. */
+typedef struct
+{
+ /** The low bits of the CPA. */
+ uint32_t cpa_lo;
+ /** The high bits of the CPA. */
+ uint16_t cpa_hi : 15;
+ /** Should this packet be sent directly from caches instead of DRAM,
+ * using hash-for-home to locate the packet data?
+ */
+ uint16_t hash_for_home : 1;
+ /** The length in bytes. */
+ uint16_t length;
+} lepp_frag_t;
+
+
+/** An LEPP command that handles TSO. */
+typedef struct
+{
+ /** Is this a TSO transfer?
+ *
+ * NOTE: This field is always 1, to distinguish it from
+ * lepp_cmd_t. It must come first!
+ */
+ uint8_t tso : 1;
+
+ /** Unused padding bits. */
+ uint8_t _unused : 7;
+
+ /** Size of the header[] array in bytes. It must be in the range
+ * [40, 127], which are the smallest header for a TCP packet over
+ * Ethernet and the maximum possible prepend size supported by
+ * hardware, respectively. Note that the array storage must be
+ * padded out to a multiple of four bytes so that the following
+ * LEPP command is aligned properly.
+ */
+ uint8_t header_size;
+
+ /** Byte offset of the IP header in header[]. */
+ uint8_t ip_offset;
+
+ /** Byte offset of the TCP header in header[]. */
+ uint8_t tcp_offset;
+
+ /** The number of bytes to use for the payload of each packet,
+ * except of course the last one, which may not have enough bytes.
+ * This means that each Ethernet packet except the last will have a
+ * size of header_size + payload_size.
+ */
+ uint16_t payload_size;
+
+ /** The length of the 'frags' array that follows this struct. */
+ uint16_t num_frags;
+
+ /** The actual frags. */
+ lepp_frag_t frags[0 /* Variable-sized; num_frags entries. */];
+
+ /*
+ * The packet header template logically follows frags[],
+ * but you can't declare that in C.
+ *
+ * uint32_t header[header_size_in_words_rounded_up];
+ */
+
+} lepp_tso_cmd_t;
+
+
+/** An LEPP completion ring entry. */
+typedef void* lepp_comp_t;
+
+
+/** Maximum number of frags for one TSO command. This is adapted from
+ * linux's "MAX_SKB_FRAGS", and presumably over-estimates by one, for
+ * our page size of exactly 65536. We add one for a "body" fragment.
+ */
+#define LEPP_MAX_FRAGS (65536 / HV_PAGE_SIZE_SMALL + 2 + 1)
+
+/** Total number of bytes needed for an lepp_tso_cmd_t. */
+#define LEPP_TSO_CMD_SIZE(num_frags, header_size) \
+ (sizeof(lepp_tso_cmd_t) + \
+ (num_frags) * sizeof(lepp_frag_t) + \
+ (((header_size) + 3) & -4))
+
+/** The size of the lepp "cmd" queue. */
+#define LEPP_CMD_QUEUE_BYTES \
+ (((CHIP_L2_CACHE_SIZE() - 2 * CHIP_L2_LINE_SIZE()) / \
+ (sizeof(lepp_cmd_t) + sizeof(lepp_comp_t))) * sizeof(lepp_cmd_t))
+
+/** The largest possible command that can go in lepp_queue_t::cmds[]. */
+#define LEPP_MAX_CMD_SIZE LEPP_TSO_CMD_SIZE(LEPP_MAX_FRAGS, 128)
+
+/** The largest possible value of lepp_queue_t::cmd_{head, tail} (inclusive).
+ */
+#define LEPP_CMD_LIMIT \
+ (LEPP_CMD_QUEUE_BYTES - LEPP_MAX_CMD_SIZE)
+
+/** The maximum number of completions in an LEPP queue. */
+#define LEPP_COMP_QUEUE_SIZE \
+ ((LEPP_CMD_LIMIT + sizeof(lepp_cmd_t) - 1) / sizeof(lepp_cmd_t))
+
+/** Increment an index modulo the queue size. */
+#define LEPP_QINC(var) \
+ (var = __insn_mnz(var - (LEPP_COMP_QUEUE_SIZE - 1), var + 1))
+
+/** A queue used to convey egress commands from the client to LEPP. */
+typedef struct
+{
+ /** Index of first completion not yet processed by user code.
+ * If this is equal to comp_busy, there are no such completions.
+ *
+ * NOTE: This is only read/written by the user.
+ */
+ unsigned int comp_head;
+
+ /** Index of first completion record not yet completed.
+ * If this is equal to comp_tail, there are no such completions.
+ * This index gets advanced (modulo LEPP_QUEUE_SIZE) whenever
+ * a command with the 'completion' bit set is finished.
+ *
+ * NOTE: This is only written by LEPP, only read by the user.
+ */
+ volatile unsigned int comp_busy;
+
+ /** Index of the first empty slot in the completion ring.
+ * Entries from this up to but not including comp_head (in ring order)
+ * can be filled in with completion data.
+ *
+ * NOTE: This is only read/written by the user.
+ */
+ unsigned int comp_tail;
+
+ /** Byte index of first command enqueued for LEPP but not yet processed.
+ *
+ * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+ *
+ * NOTE: LEPP advances this counter as soon as it no longer needs
+ * the cmds[] storage for this entry, but the transfer is not actually
+ * complete (i.e. the buffer pointed to by the command is no longer
+ * needed) until comp_busy advances.
+ *
+ * If this is equal to cmd_tail, the ring is empty.
+ *
+ * NOTE: This is only written by LEPP, only read by the user.
+ */
+ volatile unsigned int cmd_head;
+
+ /** Byte index of first empty slot in the command ring. This field can
+ * be incremented up to but not equal to cmd_head (because that would
+ * mean the ring is empty).
+ *
+ * This is always divisible by sizeof(void*) and always <= LEPP_CMD_LIMIT.
+ *
+ * NOTE: This is read/written by the user, only read by LEPP.
+ */
+ volatile unsigned int cmd_tail;
+
+ /** A ring of variable-sized egress DMA commands.
+ *
+ * NOTE: Only written by the user, only read by LEPP.
+ */
+ char cmds[LEPP_CMD_QUEUE_BYTES]
+ __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+
+ /** A ring of user completion data.
+ * NOTE: Only read/written by the user.
+ */
+ lepp_comp_t comps[LEPP_COMP_QUEUE_SIZE]
+ __attribute__((aligned(CHIP_L2_LINE_SIZE())));
+} lepp_queue_t;
+
+
+/** An internal helper function for determining the number of entries
+ * available in a ring buffer, given that there is one sentinel.
+ */
+static inline unsigned int
+_lepp_num_free_slots(unsigned int head, unsigned int tail)
+{
+ /*
+ * One entry is reserved for use as a sentinel, to distinguish
+ * "empty" from "full". So we compute
+ * (head - tail - 1) % LEPP_QUEUE_SIZE, but without using a slow % operation.
+ */
+ return (head - tail - 1) + ((head <= tail) ? LEPP_COMP_QUEUE_SIZE : 0);
+}
+
+
+/** Returns how many new comp entries can be enqueued. */
+static inline unsigned int
+lepp_num_free_comp_slots(const lepp_queue_t* q)
+{
+ return _lepp_num_free_slots(q->comp_head, q->comp_tail);
+}
+
+static inline int
+lepp_qsub(int v1, int v2)
+{
+ int delta = v1 - v2;
+ return delta + ((delta >> 31) & LEPP_COMP_QUEUE_SIZE);
+}
+
+
+/** FIXME: Check this from linux, via a new "pwrite()" call. */
+#define LIPP_VERSION 1
+
+
+/** We use exactly two bytes of alignment padding. */
+#define LIPP_PACKET_PADDING 2
+
+/** The minimum size of a "small" buffer (including the padding). */
+#define LIPP_SMALL_PACKET_SIZE 128
+
+/*
+ * NOTE: The following two values should total to less than around
+ * 13582, to keep the total size used for "lipp_state_t" below 64K.
+ */
+
+/** The maximum number of "small" buffers.
+ * This is enough for 53 network cpus with 128 credits. Note that
+ * if these are exhausted, we will fall back to using large buffers.
+ */
+#define LIPP_SMALL_BUFFERS 6785
+
+/** The maximum number of "large" buffers.
+ * This is enough for 53 network cpus with 128 credits.
+ */
+#define LIPP_LARGE_BUFFERS 6785
+
+#endif /* __DRV_XGBE_INTF_H__ */
diff --git a/arch/tile/include/hv/netio_errors.h b/arch/tile/include/hv/netio_errors.h
new file mode 100644
index 000000000000..e1591bff61b5
--- /dev/null
+++ b/arch/tile/include/hv/netio_errors.h
@@ -0,0 +1,122 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * Error codes returned from NetIO routines.
+ */
+
+#ifndef __NETIO_ERRORS_H__
+#define __NETIO_ERRORS_H__
+
+/**
+ * @addtogroup error
+ *
+ * @brief The error codes returned by NetIO functions.
+ *
+ * NetIO functions return 0 (defined as ::NETIO_NO_ERROR) on success, and
+ * a negative value if an error occurs.
+ *
+ * In cases where a NetIO function failed due to a error reported by
+ * system libraries, the error code will be the negation of the
+ * system errno at the time of failure. The @ref netio_strerror()
+ * function will deliver error strings for both NetIO and system error
+ * codes.
+ *
+ * @{
+ */
+
+/** The set of all NetIO errors. */
+typedef enum
+{
+ /** Operation successfully completed. */
+ NETIO_NO_ERROR = 0,
+
+ /** A packet was successfully retrieved from an input queue. */
+ NETIO_PKT = 0,
+
+ /** Largest NetIO error number. */
+ NETIO_ERR_MAX = -701,
+
+ /** The tile is not registered with the IPP. */
+ NETIO_NOT_REGISTERED = -701,
+
+ /** No packet was available to retrieve from the input queue. */
+ NETIO_NOPKT = -702,
+
+ /** The requested function is not implemented. */
+ NETIO_NOT_IMPLEMENTED = -703,
+
+ /** On a registration operation, the target queue already has the maximum
+ * number of tiles registered for it, and no more may be added. On a
+ * packet send operation, the output queue is full and nothing more can
+ * be queued until some of the queued packets are actually transmitted. */
+ NETIO_QUEUE_FULL = -704,
+
+ /** The calling process or thread is not bound to exactly one CPU. */
+ NETIO_BAD_AFFINITY = -705,
+
+ /** Cannot allocate memory on requested controllers. */
+ NETIO_CANNOT_HOME = -706,
+
+ /** On a registration operation, the IPP specified is not configured
+ * to support the options requested; for instance, the application
+ * wants a specific type of tagged headers which the configured IPP
+ * doesn't support. Or, the supplied configuration information is
+ * not self-consistent, or is out of range; for instance, specifying
+ * both NETIO_RECV and NETIO_NO_RECV, or asking for more than
+ * NETIO_MAX_SEND_BUFFERS to be preallocated. On a VLAN or bucket
+ * configure operation, the number of items, or the base item, was
+ * out of range.
+ */
+ NETIO_BAD_CONFIG = -707,
+
+ /** Too many tiles have registered to transmit packets. */
+ NETIO_TOOMANY_XMIT = -708,
+
+ /** Packet transmission was attempted on a queue which was registered
+ with transmit disabled. */
+ NETIO_UNREG_XMIT = -709,
+
+ /** This tile is already registered with the IPP. */
+ NETIO_ALREADY_REGISTERED = -710,
+
+ /** The Ethernet link is down. The application should try again later. */
+ NETIO_LINK_DOWN = -711,
+
+ /** An invalid memory buffer has been specified. This may be an unmapped
+ * virtual address, or one which does not meet alignment requirements.
+ * For netio_input_register(), this error may be returned when multiple
+ * processes specify different memory regions to be used for NetIO
+ * buffers. That can happen if these processes specify explicit memory
+ * regions with the ::NETIO_FIXED_BUFFER_VA flag, or if tmc_cmem_init()
+ * has not been called by a common ancestor of the processes.
+ */
+ NETIO_FAULT = -712,
+
+ /** Cannot combine user-managed shared memory and cache coherence. */
+ NETIO_BAD_CACHE_CONFIG = -713,
+
+ /** Smallest NetIO error number. */
+ NETIO_ERR_MIN = -713,
+
+#ifndef __DOXYGEN__
+ /** Used internally to mean that no response is needed; never returned to
+ * an application. */
+ NETIO_NO_RESPONSE = 1
+#endif
+} netio_error_t;
+
+/** @} */
+
+#endif /* __NETIO_ERRORS_H__ */
diff --git a/arch/tile/include/hv/netio_intf.h b/arch/tile/include/hv/netio_intf.h
new file mode 100644
index 000000000000..8d20972aba2c
--- /dev/null
+++ b/arch/tile/include/hv/netio_intf.h
@@ -0,0 +1,2975 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+/**
+ * NetIO interface structures and macros.
+ */
+
+#ifndef __NETIO_INTF_H__
+#define __NETIO_INTF_H__
+
+#include <hv/netio_errors.h>
+
+#ifdef __KERNEL__
+#include <linux/types.h>
+#else
+#include <stdint.h>
+#endif
+
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__)
+#include <assert.h>
+#define netio_assert assert /**< Enable assertions from macros */
+#else
+#define netio_assert(...) ((void)(0)) /**< Disable assertions from macros */
+#endif
+
+/*
+ * If none of these symbols are defined, we're building libnetio in an
+ * environment where we have pthreads, so we'll enable locking.
+ */
+#if !defined(__HV__) && !defined(__BOGUX__) && !defined(__KERNEL__) && \
+ !defined(__NEWLIB__)
+#define _NETIO_PTHREAD /**< Include a mutex in netio_queue_t below */
+
+/*
+ * If NETIO_UNLOCKED is defined, we don't do use per-cpu locks on
+ * per-packet NetIO operations. We still do pthread locking on things
+ * like netio_input_register, though. This is used for building
+ * libnetio_unlocked.
+ */
+#ifndef NETIO_UNLOCKED
+
+/* Avoid PLT overhead by using our own inlined per-cpu lock. */
+#include <sched.h>
+typedef int _netio_percpu_mutex_t;
+
+static __inline int
+_netio_percpu_mutex_init(_netio_percpu_mutex_t* lock)
+{
+ *lock = 0;
+ return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_lock(_netio_percpu_mutex_t* lock)
+{
+ while (__builtin_expect(__insn_tns(lock), 0))
+ sched_yield();
+ return 0;
+}
+
+static __inline int
+_netio_percpu_mutex_unlock(_netio_percpu_mutex_t* lock)
+{
+ *lock = 0;
+ return 0;
+}
+
+#else /* NETIO_UNLOCKED */
+
+/* Don't do any locking for per-packet NetIO operations. */
+typedef int _netio_percpu_mutex_t;
+#define _netio_percpu_mutex_init(L)
+#define _netio_percpu_mutex_lock(L)
+#define _netio_percpu_mutex_unlock(L)
+
+#endif /* NETIO_UNLOCKED */
+#endif /* !__HV__, !__BOGUX, !__KERNEL__, !__NEWLIB__ */
+
+/** How many tiles can register for a given queue.
+ * @ingroup setup */
+#define NETIO_MAX_TILES_PER_QUEUE 64
+
+
+/** Largest permissible queue identifier.
+ * @ingroup setup */
+#define NETIO_MAX_QUEUE_ID 255
+
+
+#ifndef __DOXYGEN__
+
+/* Metadata packet checksum/ethertype flags. */
+
+/** The L4 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L4_CSUM_SHIFT 0
+#define _NETIO_PKT_NO_L4_CSUM_RMASK 1
+#define _NETIO_PKT_NO_L4_CSUM_MASK \
+ (_NETIO_PKT_NO_L4_CSUM_RMASK << _NETIO_PKT_NO_L4_CSUM_SHIFT)
+
+/** The L3 checksum has not been calculated. */
+#define _NETIO_PKT_NO_L3_CSUM_SHIFT 1
+#define _NETIO_PKT_NO_L3_CSUM_RMASK 1
+#define _NETIO_PKT_NO_L3_CSUM_MASK \
+ (_NETIO_PKT_NO_L3_CSUM_RMASK << _NETIO_PKT_NO_L3_CSUM_SHIFT)
+
+/** The L3 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L3_CSUM_SHIFT 2
+#define _NETIO_PKT_BAD_L3_CSUM_RMASK 1
+#define _NETIO_PKT_BAD_L3_CSUM_MASK \
+ (_NETIO_PKT_BAD_L3_CSUM_RMASK << _NETIO_PKT_BAD_L3_CSUM_SHIFT)
+
+/** The Ethernet packet type is unrecognized. */
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT 3
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_RMASK 1
+#define _NETIO_PKT_TYPE_UNRECOGNIZED_MASK \
+ (_NETIO_PKT_TYPE_UNRECOGNIZED_RMASK << \
+ _NETIO_PKT_TYPE_UNRECOGNIZED_SHIFT)
+
+/* Metadata packet type flags. */
+
+/** Where the packet type bits are; this field is the index into
+ * _netio_pkt_info. */
+#define _NETIO_PKT_TYPE_SHIFT 4
+#define _NETIO_PKT_TYPE_RMASK 0x3F
+
+/** How many VLAN tags the packet has, and, if we have two, which one we
+ * actually grouped on. A VLAN within a proprietary (Marvell or Broadcom)
+ * tag is counted here. */
+#define _NETIO_PKT_VLAN_SHIFT 4
+#define _NETIO_PKT_VLAN_RMASK 0x3
+#define _NETIO_PKT_VLAN_MASK \
+ (_NETIO_PKT_VLAN_RMASK << _NETIO_PKT_VLAN_SHIFT)
+#define _NETIO_PKT_VLAN_NONE 0 /* No VLAN tag. */
+#define _NETIO_PKT_VLAN_ONE 1 /* One VLAN tag. */
+#define _NETIO_PKT_VLAN_TWO_OUTER 2 /* Two VLAN tags, outer one used. */
+#define _NETIO_PKT_VLAN_TWO_INNER 3 /* Two VLAN tags, inner one used. */
+
+/** Which proprietary tags the packet has. */
+#define _NETIO_PKT_TAG_SHIFT 6
+#define _NETIO_PKT_TAG_RMASK 0x3
+#define _NETIO_PKT_TAG_MASK \
+ (_NETIO_PKT_TAG_RMASK << _NETIO_PKT_TAG_SHIFT)
+#define _NETIO_PKT_TAG_NONE 0 /* No proprietary tags. */
+#define _NETIO_PKT_TAG_MRVL 1 /* Marvell HyperG.Stack tags. */
+#define _NETIO_PKT_TAG_MRVL_EXT 2 /* HyperG.Stack extended tags. */
+#define _NETIO_PKT_TAG_BRCM 3 /* Broadcom HiGig tags. */
+
+/** Whether a packet has an LLC + SNAP header. */
+#define _NETIO_PKT_SNAP_SHIFT 8
+#define _NETIO_PKT_SNAP_RMASK 0x1
+#define _NETIO_PKT_SNAP_MASK \
+ (_NETIO_PKT_SNAP_RMASK << _NETIO_PKT_SNAP_SHIFT)
+
+/* NOTE: Bits 9 and 10 are unused. */
+
+/** Length of any custom data before the L2 header, in words. */
+#define _NETIO_PKT_CUSTOM_LEN_SHIFT 11
+#define _NETIO_PKT_CUSTOM_LEN_RMASK 0x1F
+#define _NETIO_PKT_CUSTOM_LEN_MASK \
+ (_NETIO_PKT_CUSTOM_LEN_RMASK << _NETIO_PKT_CUSTOM_LEN_SHIFT)
+
+/** The L4 checksum is incorrect (or perhaps has not been calculated). */
+#define _NETIO_PKT_BAD_L4_CSUM_SHIFT 16
+#define _NETIO_PKT_BAD_L4_CSUM_RMASK 0x1
+#define _NETIO_PKT_BAD_L4_CSUM_MASK \
+ (_NETIO_PKT_BAD_L4_CSUM_RMASK << _NETIO_PKT_BAD_L4_CSUM_SHIFT)
+
+/** Length of the L2 header, in words. */
+#define _NETIO_PKT_L2_LEN_SHIFT 17
+#define _NETIO_PKT_L2_LEN_RMASK 0x1F
+#define _NETIO_PKT_L2_LEN_MASK \
+ (_NETIO_PKT_L2_LEN_RMASK << _NETIO_PKT_L2_LEN_SHIFT)
+
+
+/* Flags in minimal packet metadata. */
+
+/** We need an eDMA checksum on this packet. */
+#define _NETIO_PKT_NEED_EDMA_CSUM_SHIFT 0
+#define _NETIO_PKT_NEED_EDMA_CSUM_RMASK 1
+#define _NETIO_PKT_NEED_EDMA_CSUM_MASK \
+ (_NETIO_PKT_NEED_EDMA_CSUM_RMASK << _NETIO_PKT_NEED_EDMA_CSUM_SHIFT)
+
+/* Data within the packet information table. */
+
+/* Note that, for efficiency, code which uses these fields assumes that none
+ * of the shift values below are zero. See uses below for an explanation. */
+
+/** Offset within the L2 header of the innermost ethertype (in halfwords). */
+#define _NETIO_PKT_INFO_ETYPE_SHIFT 6
+#define _NETIO_PKT_INFO_ETYPE_RMASK 0x1F
+
+/** Offset within the L2 header of the VLAN tag (in halfwords). */
+#define _NETIO_PKT_INFO_VLAN_SHIFT 11
+#define _NETIO_PKT_INFO_VLAN_RMASK 0x1F
+
+#endif
+
+
+/** The size of a memory buffer representing a small packet.
+ * @ingroup egress */
+#define SMALL_PACKET_SIZE 256
+
+/** The size of a memory buffer representing a large packet.
+ * @ingroup egress */
+#define LARGE_PACKET_SIZE 2048
+
+/** The size of a memory buffer representing a jumbo packet.
+ * @ingroup egress */
+#define JUMBO_PACKET_SIZE (12 * 1024)
+
+
+/* Common ethertypes.
+ * @ingroup ingress */
+/** @{ */
+/** The ethertype of IPv4. */
+#define ETHERTYPE_IPv4 (0x0800)
+/** The ethertype of ARP. */
+#define ETHERTYPE_ARP (0x0806)
+/** The ethertype of VLANs. */
+#define ETHERTYPE_VLAN (0x8100)
+/** The ethertype of a Q-in-Q header. */
+#define ETHERTYPE_Q_IN_Q (0x9100)
+/** The ethertype of IPv6. */
+#define ETHERTYPE_IPv6 (0x86DD)
+/** The ethertype of MPLS. */
+#define ETHERTYPE_MPLS (0x8847)
+/** @} */
+
+
+/** The possible return values of NETIO_PKT_STATUS.
+ * @ingroup ingress
+ */
+typedef enum
+{
+ /** No problems were detected with this packet. */
+ NETIO_PKT_STATUS_OK,
+ /** The packet is undersized; this is expected behavior if the packet's
+ * ethertype is unrecognized, but otherwise the packet is likely corrupt. */
+ NETIO_PKT_STATUS_UNDERSIZE,
+ /** The packet is oversized and some trailing bytes have been discarded.
+ This is expected behavior for short packets, since it's impossible to
+ precisely determine the amount of padding which may have been added to
+ them to make them meet the minimum Ethernet packet size. */
+ NETIO_PKT_STATUS_OVERSIZE,
+ /** The packet was judged to be corrupt by hardware (for instance, it had
+ a bad CRC, or part of it was discarded due to lack of buffer space in
+ the I/O shim) and should be discarded. */
+ NETIO_PKT_STATUS_BAD
+} netio_pkt_status_t;
+
+
+/** Log2 of how many buckets we have. */
+#define NETIO_LOG2_NUM_BUCKETS (10)
+
+/** How many buckets we have.
+ * @ingroup ingress */
+#define NETIO_NUM_BUCKETS (1 << NETIO_LOG2_NUM_BUCKETS)
+
+
+/**
+ * @brief A group-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given group.
+ */
+typedef union {
+ /** The header broken down into bits. */
+ struct {
+ /** Whether we should balance on L4, if available */
+ unsigned int __balance_on_l4:1;
+ /** Whether we should balance on L3, if available */
+ unsigned int __balance_on_l3:1;
+ /** Whether we should balance on L2, if available */
+ unsigned int __balance_on_l2:1;
+ /** Reserved for future use */
+ unsigned int __reserved:1;
+ /** The base bucket to use to send traffic */
+ unsigned int __bucket_base:NETIO_LOG2_NUM_BUCKETS;
+ /** The mask to apply to the balancing value. This must be one less
+ * than a power of two, e.g. 0x3 or 0xFF.
+ */
+ unsigned int __bucket_mask:NETIO_LOG2_NUM_BUCKETS;
+ /** Pad to 32 bits */
+ unsigned int __padding:(32 - 4 - 2 * NETIO_LOG2_NUM_BUCKETS);
+ } bits;
+ /** To send out the IDN. */
+ unsigned int word;
+}
+netio_group_t;
+
+
+/**
+ * @brief A VLAN-to-bucket identifier.
+ *
+ * @ingroup setup
+ *
+ * This tells us what to do with a given VLAN.
+ */
+typedef netio_group_t netio_vlan_t;
+
+
+/**
+ * A bucket-to-queue mapping.
+ * @ingroup setup
+ */
+typedef unsigned char netio_bucket_t;
+
+
+/**
+ * A packet size can always fit in a netio_size_t.
+ * @ingroup setup
+ */
+typedef unsigned int netio_size_t;
+
+
+/**
+ * @brief Ethernet standard (ingress) packet metadata.
+ *
+ * @ingroup ingress
+ *
+ * This is additional data associated with each packet.
+ * This structure is opaque and accessed through the @ref ingress.
+ *
+ * Also, the buffer population operation currently assumes that standard
+ * metadata is at least as large as minimal metadata, and will need to be
+ * modified if that is no longer the case.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ /** This structure is opaque. */
+ unsigned char opaque[24];
+#else
+ /** The overall ordinal of the packet */
+ unsigned int __packet_ordinal;
+ /** The ordinal of the packet within the group */
+ unsigned int __group_ordinal;
+ /** The best flow hash IPP could compute. */
+ unsigned int __flow_hash;
+ /** Flags pertaining to checksum calculation, packet type, etc. */
+ unsigned int __flags;
+ /** The first word of "user data". */
+ unsigned int __user_data_0;
+ /** The second word of "user data". */
+ unsigned int __user_data_1;
+#endif
+}
+netio_pkt_metadata_t;
+
+
+/** To ensure that the L3 header is aligned mod 4, the L2 header should be
+ * aligned mod 4 plus 2, since every supported L2 header is 4n + 2 bytes
+ * long. The standard way to do this is to simply add 2 bytes of padding
+ * before the L2 header.
+ */
+#define NETIO_PACKET_PADDING 2
+
+
+
+/**
+ * @brief Ethernet minimal (egress) packet metadata.
+ *
+ * @ingroup egress
+ *
+ * This structure represents information about packets which have
+ * been processed by @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer(). This structure is opaque
+ * and accessed through the @ref egress.
+ *
+ * @internal This structure is actually copied into the memory used by
+ * standard metadata, which is assumed to be large enough.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ /** This structure is opaque. */
+ unsigned char opaque[14];
+#else
+ /** The offset of the L2 header from the start of the packet data. */
+ unsigned short l2_offset;
+ /** The offset of the L3 header from the start of the packet data. */
+ unsigned short l3_offset;
+ /** Where to write the checksum. */
+ unsigned char csum_location;
+ /** Where to start checksumming from. */
+ unsigned char csum_start;
+ /** Flags pertaining to checksum calculation etc. */
+ unsigned short flags;
+ /** The L2 length of the packet. */
+ unsigned short l2_length;
+ /** The checksum with which to seed the checksum generator. */
+ unsigned short csum_seed;
+ /** How much to checksum. */
+ unsigned short csum_length;
+#endif
+}
+netio_pkt_minimal_metadata_t;
+
+
+#ifndef __DOXYGEN__
+
+/**
+ * @brief An I/O notification header.
+ *
+ * This is the first word of data received from an I/O shim in a notification
+ * packet. It contains framing and status information.
+ */
+typedef union
+{
+ unsigned int word; /**< The whole word. */
+ /** The various fields. */
+ struct
+ {
+ unsigned int __channel:7; /**< Resource channel. */
+ unsigned int __type:4; /**< Type. */
+ unsigned int __ack:1; /**< Whether an acknowledgement is needed. */
+ unsigned int __reserved:1; /**< Reserved. */
+ unsigned int __protocol:1; /**< A protocol-specific word is added. */
+ unsigned int __status:2; /**< Status of the transfer. */
+ unsigned int __framing:2; /**< Framing of the transfer. */
+ unsigned int __transfer_size:14; /**< Transfer size in bytes (total). */
+ } bits;
+}
+__netio_pkt_notif_t;
+
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_HANDLE_BASE(p) \
+ ((unsigned char*)((p).word & 0xFFFFFFC0))
+
+/**
+ * Returns the base address of the packet.
+ */
+#define _NETIO_PKT_BASE(p) \
+ _NETIO_PKT_HANDLE_BASE(p->__packet)
+
+/**
+ * @brief An I/O notification packet (second word)
+ *
+ * This is the second word of data received from an I/O shim in a notification
+ * packet. This is the virtual address of the packet buffer, plus some flag
+ * bits. (The virtual address of the packet is always 256-byte aligned so we
+ * have room for 8 bits' worth of flags in the low 8 bits.)
+ *
+ * @internal
+ * NOTE: The low two bits must contain "__queue", so the "packet size"
+ * (SIZE_SMALL, SIZE_LARGE, or SIZE_JUMBO) can be determined quickly.
+ *
+ * If __addr or __offset are moved, _NETIO_PKT_BASE
+ * (defined right below this) must be changed.
+ */
+typedef union
+{
+ unsigned int word; /**< The whole word. */
+ /** The various fields. */
+ struct
+ {
+ /** Which queue the packet will be returned to once it is sent back to
+ the IPP. This is one of the SIZE_xxx values. */
+ unsigned int __queue:2;
+
+ /** The IPP handle of the sending IPP. */
+ unsigned int __ipp_handle:2;
+
+ /** Reserved for future use. */
+ unsigned int __reserved:1;
+
+ /** If 1, this packet has minimal (egress) metadata; otherwise, it
+ has standard (ingress) metadata. */
+ unsigned int __minimal:1;
+
+ /** Offset of the metadata within the packet. This value is multiplied
+ * by 64 and added to the base packet address to get the metadata
+ * address. Note that this field is aligned within the word such that
+ * you can easily extract the metadata address with a 26-bit mask. */
+ unsigned int __offset:2;
+
+ /** The top 24 bits of the packet's virtual address. */
+ unsigned int __addr:24;
+ } bits;
+}
+__netio_pkt_handle_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/**
+ * @brief A handle for an I/O packet's storage.
+ * @ingroup ingress
+ *
+ * netio_pkt_handle_t encodes the concept of a ::netio_pkt_t with its
+ * packet metadata removed. It is a much smaller type that exists to
+ * facilitate applications where the full ::netio_pkt_t type is too
+ * large, such as those that cache enormous numbers of packets or wish
+ * to transmit packet descriptors over the UDN.
+ *
+ * Because there is no metadata, most ::netio_pkt_t operations cannot be
+ * performed on a netio_pkt_handle_t. It supports only
+ * netio_free_handle() (to free the buffer) and
+ * NETIO_PKT_CUSTOM_DATA_H() (to access a pointer to its contents).
+ * The application must acquire any additional metadata it wants from the
+ * original ::netio_pkt_t and record it separately.
+ *
+ * A netio_pkt_handle_t can be extracted from a ::netio_pkt_t by calling
+ * NETIO_PKT_HANDLE(). An invalid handle (analogous to NULL) can be
+ * created by assigning the value ::NETIO_PKT_HANDLE_NONE. A handle can
+ * be tested for validity with NETIO_PKT_HANDLE_IS_VALID().
+ */
+typedef struct
+{
+ unsigned int word; /**< Opaque bits. */
+} netio_pkt_handle_t;
+
+/**
+ * @brief A packet descriptor.
+ *
+ * @ingroup ingress
+ * @ingroup egress
+ *
+ * This data structure represents a packet. The structure is manipulated
+ * through the @ref ingress and the @ref egress.
+ *
+ * While the contents of a netio_pkt_t are opaque, the structure itself is
+ * portable. This means that it may be shared between all tiles which have
+ * done a netio_input_register() call for the interface on which the pkt_t
+ * was initially received (via netio_get_packet()) or retrieved (via
+ * netio_get_buffer()). The contents of a netio_pkt_t can be transmitted to
+ * another tile via shared memory, or via a UDN message, or by other means.
+ * The destination tile may then use the pkt_t as if it had originally been
+ * received locally; it may read or write the packet's data, read its
+ * metadata, free the packet, send the packet, transfer the netio_pkt_t to
+ * yet another tile, and so forth.
+ *
+ * Once a netio_pkt_t has been transferred to a second tile, the first tile
+ * should not reference the original copy; in particular, if more than one
+ * tile frees or sends the same netio_pkt_t, the IPP's packet free lists will
+ * become corrupted. Note also that each tile which reads or modifies
+ * packet data must obey the memory coherency rules outlined in @ref input.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ /** This structure is opaque. */
+ unsigned char opaque[32];
+#else
+ /** For an ingress packet (one with standard metadata), this is the
+ * notification header we got from the I/O shim. For an egress packet
+ * (one with minimal metadata), this word is zero if the packet has not
+ * been populated, and nonzero if it has. */
+ __netio_pkt_notif_t __notif_header;
+
+ /** Virtual address of the packet buffer, plus state flags. */
+ __netio_pkt_handle_t __packet;
+
+ /** Metadata associated with the packet. */
+ netio_pkt_metadata_t __metadata;
+#endif
+}
+netio_pkt_t;
+
+
+#ifndef __DOXYGEN__
+
+#define __NETIO_PKT_NOTIF_HEADER(pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE(pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_QUEUE(pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_NOTIF_HEADER_M(mda, pkt) ((pkt)->__notif_header)
+#define __NETIO_PKT_IPP_HANDLE_M(mda, pkt) ((pkt)->__packet.bits.__ipp_handle)
+#define __NETIO_PKT_MINIMAL(pkt) ((pkt)->__packet.bits.__minimal)
+#define __NETIO_PKT_QUEUE_M(mda, pkt) ((pkt)->__packet.bits.__queue)
+#define __NETIO_PKT_FLAGS_M(mda, pkt) ((mda)->__flags)
+
+/* Packet information table, used by the attribute access functions below. */
+extern const uint16_t _netio_pkt_info[];
+
+#endif /* __DOXYGEN__ */
+
+
+#ifndef __DOXYGEN__
+/* These macros are deprecated and will disappear in a future MDE release. */
+#define NETIO_PKT_GOOD_CHECKSUM(pkt) \
+ NETIO_PKT_L4_CSUM_CORRECT(pkt)
+#define NETIO_PKT_GOOD_CHECKSUM_M(mda, pkt) \
+ NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt)
+#endif /* __DOXYGEN__ */
+
+
+/* Packet attribute access functions. */
+
+/** Return a pointer to the metadata for a packet.
+ * @ingroup ingress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_M" suffix usually improves performance. This
+ * function must be called on an 'ingress' packet (i.e. one retrieved
+ * by @ref netio_get_packet(), on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer have not been called). Use of this
+ * function on an 'egress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_metadata_t*
+NETIO_PKT_METADATA(netio_pkt_t* pkt)
+{
+ netio_assert(!pkt->__packet.bits.__minimal);
+ return &pkt->__metadata;
+}
+
+
+/** Return a pointer to the minimal metadata for a packet.
+ * @ingroup egress
+ *
+ * Calling this function once and passing the result to other retrieval
+ * functions with a "_MM" suffix usually improves performance. This
+ * function must be called on an 'egress' packet (i.e. one on which
+ * @ref netio_populate_buffer() or @ref netio_populate_prepend_buffer()
+ * have been called, or one retrieved by @ref netio_get_buffer()). Use of
+ * this function on an 'ingress' packet will cause an assertion failure.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's standard metadata.
+ */
+static __inline netio_pkt_minimal_metadata_t*
+NETIO_PKT_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+ netio_assert(pkt->__packet.bits.__minimal);
+ return (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+}
+
+
+/** Determine whether a packet has 'minimal' metadata.
+ * @ingroup pktfuncs
+ *
+ * This function will return nonzero if the packet is an 'egress'
+ * packet (i.e. one on which @ref netio_populate_buffer() or
+ * @ref netio_populate_prepend_buffer() have been called, or one
+ * retrieved by @ref netio_get_buffer()), and zero if the packet
+ * is an 'ingress' packet (i.e. one retrieved by @ref netio_get_packet(),
+ * which has not been converted into an 'egress' packet).
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet has minimal metadata.
+ */
+static __inline unsigned int
+NETIO_PKT_IS_MINIMAL(netio_pkt_t* pkt)
+{
+ return pkt->__packet.bits.__minimal;
+}
+
+
+/** Return a handle for a packet's storage.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A handle for the packet's storage.
+ */
+static __inline netio_pkt_handle_t
+NETIO_PKT_HANDLE(netio_pkt_t* pkt)
+{
+ netio_pkt_handle_t h;
+ h.word = pkt->__packet.word;
+ return h;
+}
+
+
+/** A special reserved value indicating the absence of a packet handle.
+ *
+ * @ingroup pktfuncs
+ */
+#define NETIO_PKT_HANDLE_NONE ((netio_pkt_handle_t) { 0 })
+
+
+/** Test whether a packet handle is valid.
+ *
+ * Applications may wish to use the reserved value NETIO_PKT_HANDLE_NONE
+ * to indicate no packet at all. This function tests to see if a packet
+ * handle is a real handle, not this special reserved value.
+ *
+ * @ingroup pktfuncs
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return One if the packet handle is valid, else zero.
+ */
+static __inline unsigned int
+NETIO_PKT_HANDLE_IS_VALID(netio_pkt_handle_t handle)
+{
+ return handle.word != 0;
+}
+
+
+
+/** Return a pointer to the start of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] handle Handle on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_H(netio_pkt_handle_t handle)
+{
+ return _NETIO_PKT_HANDLE_BASE(handle) + NETIO_PACKET_PADDING;
+}
+
+
+/** Return the length of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ /*
+ * Note that we effectively need to extract a quantity from the flags word
+ * which is measured in words, and then turn it into bytes by shifting
+ * it left by 2. We do this all at once by just shifting right two less
+ * bits, and shifting the mask up two bits.
+ */
+ return ((mda->__flags >> (_NETIO_PKT_CUSTOM_LEN_SHIFT - 2)) &
+ (_NETIO_PKT_CUSTOM_LEN_RMASK << 2));
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (__NETIO_PKT_NOTIF_HEADER(pkt).bits.__transfer_size -
+ NETIO_PACKET_PADDING);
+}
+
+
+/** Return a pointer to the start of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return NETIO_PKT_CUSTOM_DATA_H(NETIO_PKT_HANDLE(pkt));
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ /*
+ * Note that we effectively need to extract a quantity from the flags word
+ * which is measured in words, and then turn it into bytes by shifting
+ * it left by 2. We do this all at once by just shifting right two less
+ * bits, and shifting the mask up two bits. We then add two bytes.
+ */
+ return ((mda->__flags >> (_NETIO_PKT_L2_LEN_SHIFT - 2)) &
+ (_NETIO_PKT_L2_LEN_RMASK << 2)) + 2;
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt) -
+ NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the start of the packet's L2 (Ethernet) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_CUSTOM_DATA_M(mda, pkt) +
+ NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally,
+ * the IP) header.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_L2_LENGTH_M(mda, pkt) -
+ NETIO_PKT_L2_HEADER_LENGTH_M(mda,pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup ingress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_L2_DATA_M(mda, pkt) +
+ NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt));
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero. (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.) The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals. Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__packet_ordinal;
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values. In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.) The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals. Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__group_ordinal;
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value will be zero if the packet does not have a VLAN tag, or if
+ * this value was not extracted from the packet.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ int vl = (mda->__flags >> _NETIO_PKT_VLAN_SHIFT) & _NETIO_PKT_VLAN_RMASK;
+ unsigned short* pkt_p;
+ int index;
+ unsigned short val;
+
+ if (vl == _NETIO_PKT_VLAN_NONE)
+ return 0;
+
+ pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+ index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+ val = pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_VLAN_SHIFT) &
+ _NETIO_PKT_INFO_VLAN_RMASK];
+
+#ifdef __TILECC__
+ return (__insn_bytex(val) >> 16) & 0xFFF;
+#else
+ return (__builtin_bswap32(val) >> 16) & 0xFFF;
+#endif
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is usually contained within the packet header.
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED_M()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ unsigned short* pkt_p = (unsigned short*) NETIO_PKT_L2_DATA_M(mda, pkt);
+ int index = (mda->__flags >> _NETIO_PKT_TYPE_SHIFT) & _NETIO_PKT_TYPE_RMASK;
+
+ unsigned short val =
+ pkt_p[(_netio_pkt_info[index] >> _NETIO_PKT_INFO_ETYPE_SHIFT) &
+ _NETIO_PKT_INFO_ETYPE_RMASK];
+
+ return __builtin_bswap32(val) >> 16;
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__flow_hash;
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__user_data_0;
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return mda->__user_data_1;
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags & _NETIO_PKT_NO_L4_CSUM_MASK);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ * be correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags &
+ (_NETIO_PKT_BAD_L4_CSUM_MASK | _NETIO_PKT_NO_L4_CSUM_MASK));
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags & _NETIO_PKT_NO_L3_CSUM_MASK);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ * correct.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags &
+ (_NETIO_PKT_BAD_L3_CSUM_MASK | _NETIO_PKT_NO_L3_CSUM_MASK));
+}
+
+
+/** Determine whether the ethertype was recognized and L3 packet data was
+ * processed.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the ethertype was recognized and L3 packet data was
+ * processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return !(mda->__flags & _NETIO_PKT_TYPE_UNRECOGNIZED_MASK);
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length. Normally, applications should use
+ * @ref NETIO_PKT_BAD_M() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ * its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return ((NETIO_PKT_STATUS_M(mda, pkt) & 1) &&
+ (NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt) ||
+ NETIO_PKT_STATUS_M(mda, pkt) == NETIO_PKT_STATUS_BAD));
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return mmd->l2_length;
+}
+
+
+/** Return the length of the L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+ return mmd->l3_offset - mmd->l2_offset;
+}
+
+
+/** Return the length of the packet, starting with the L3 (IP) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return (NETIO_PKT_L2_LENGTH_MM(mmd, pkt) -
+ NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt));
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup egress
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return _NETIO_PKT_BASE(pkt) + mmd->l3_offset;
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return _NETIO_PKT_BASE(pkt) + mmd->l2_offset;
+}
+
+
+/** Retrieve the status of a packet and any errors that may have occurred
+ * during ingress processing (length mismatches, CRC errors, etc.).
+ * @ingroup ingress
+ *
+ * Note that packets for which @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns zero are always reported as underlength, as there is no a priori
+ * means to determine their length. Normally, applications should use
+ * @ref NETIO_PKT_BAD() instead of explicitly checking status with this
+ * function.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's status.
+ */
+static __inline netio_pkt_status_t
+NETIO_PKT_STATUS(netio_pkt_t* pkt)
+{
+ netio_assert(!pkt->__packet.bits.__minimal);
+
+ return (netio_pkt_status_t) __NETIO_PKT_NOTIF_HEADER(pkt).bits.__status;
+}
+
+
+/** Report whether a packet is bad (i.e., was shorter than expected based on
+ * its headers, or had a bad CRC).
+ * @ingroup ingress
+ *
+ * Note that this function does not verify L3 or L4 checksums.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the packet is bad and should be discarded.
+ */
+static __inline unsigned int
+NETIO_PKT_BAD(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_BAD_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's custom header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the length of the packet, starting with the custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_CUSTOM_LENGTH(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_CUSTOM_LENGTH_M(mda, pkt);
+}
+
+
+/** Return a pointer to the packet's custom header.
+ * A custom header may or may not be present, depending upon the IPP; its
+ * contents and alignment are also IPP-dependent. Currently, none of the
+ * standard IPPs supplied by Tilera produce a custom header. If present,
+ * the custom header precedes the L2 header in the packet buffer.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_CUSTOM_DATA(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_CUSTOM_DATA_M(mda, pkt);
+}
+
+
+/** Return the length of the packet's L2 (Ethernet plus VLAN or SNAP) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet's L2 header, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_HEADER_LENGTH(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L2_HEADER_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L2_HEADER_LENGTH_M(mda, pkt);
+ }
+}
+
+
+/** Return the length of the packet, starting with the L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The length of the packet, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L2_LENGTH(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L2_LENGTH_M(mda, pkt);
+ }
+}
+
+
+/** Return a pointer to the packet's L2 (Ethernet) header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to start of the packet.
+ */
+static __inline unsigned char*
+NETIO_PKT_L2_DATA(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L2_DATA_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L2_DATA_M(mda, pkt);
+ }
+}
+
+
+/** Retrieve the length of the packet, starting with the L3 (generally, the IP)
+ * header.
+ * @ingroup pktfuncs
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Length of the packet's L3 header and data, in bytes.
+ */
+static __inline netio_size_t
+NETIO_PKT_L3_LENGTH(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L3_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_LENGTH_M(mda, pkt);
+ }
+}
+
+
+/** Return a pointer to the packet's L3 (generally, the IP) header.
+ * @ingroup pktfuncs
+ *
+ * Note that we guarantee word alignment of the L3 header.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return A pointer to the packet's L3 header.
+ */
+static __inline unsigned char*
+NETIO_PKT_L3_DATA(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_L3_DATA_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_DATA_M(mda, pkt);
+ }
+}
+
+
+/** Return the ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given an ordinal number when it is delivered by the IPP.
+ * In the medium term, the ordinal is unique and monotonically increasing,
+ * being incremented by 1 for each packet; the ordinal of the first packet
+ * delivered after the IPP starts is zero. (Since the ordinal is of finite
+ * size, given enough input packets, it will eventually wrap around to zero;
+ * in the long term, therefore, ordinals are not unique.) The ordinals
+ * handed out by different IPPs are not disjoint, so two packets from
+ * different IPPs may have identical ordinals. Packets dropped by the
+ * IPP or by the I/O shim are not assigned ordinals.
+ *
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP packet ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_ORDINAL(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the per-group ordinal of the packet.
+ * @ingroup ingress
+ *
+ * Each packet is given a per-group ordinal number when it is
+ * delivered by the IPP. By default, the group is the packet's VLAN,
+ * although IPP can be recompiled to use different values. In
+ * the medium term, the ordinal is unique and monotonically
+ * increasing, being incremented by 1 for each packet; the ordinal of
+ * the first packet distributed to a particular group is zero.
+ * (Since the ordinal is of finite size, given enough input packets,
+ * it will eventually wrap around to zero; in the long term,
+ * therefore, ordinals are not unique.) The ordinals handed out by
+ * different IPPs are not disjoint, so two packets from different IPPs
+ * may have identical ordinals; similarly, packets distributed to
+ * different groups may have identical ordinals. Packets dropped by
+ * the IPP or by the I/O shim are not assigned ordinals.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's per-IPP, per-group ordinal.
+ */
+static __inline unsigned int
+NETIO_PKT_GROUP_ORDINAL(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_GROUP_ORDINAL_M(mda, pkt);
+}
+
+
+/** Return the VLAN ID assigned to the packet.
+ * @ingroup ingress
+ *
+ * This is usually also contained within the packet header. If the packet
+ * does not have a VLAN tag, the VLAN ID returned by this function is zero.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's VLAN ID.
+ */
+static __inline unsigned short
+NETIO_PKT_VLAN_ID(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_VLAN_ID_M(mda, pkt);
+}
+
+
+/** Return the ethertype of the packet.
+ * @ingroup ingress
+ *
+ * This value is reliable if @ref NETIO_PKT_ETHERTYPE_RECOGNIZED()
+ * returns true, and otherwise, may not be well defined.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's ethertype.
+ */
+static __inline unsigned short
+NETIO_PKT_ETHERTYPE(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_ETHERTYPE_M(mda, pkt);
+}
+
+
+/** Return the flow hash computed on the packet.
+ * @ingroup ingress
+ *
+ * For TCP and UDP packets, this hash is calculated by hashing together
+ * the "5-tuple" values, specifically the source IP address, destination
+ * IP address, protocol type, source port and destination port.
+ * The hash value is intended to be helpful for millions of distinct
+ * flows.
+ *
+ * For IPv4 or IPv6 packets which are neither TCP nor UDP, the flow hash is
+ * derived by hashing together the source and destination IP addresses.
+ *
+ * For MPLS-encapsulated packets, the flow hash is derived by hashing
+ * the first MPLS label.
+ *
+ * For all other packets the flow hash is computed from the source
+ * and destination Ethernet addresses.
+ *
+ * The hash is symmetric, meaning it produces the same value if the
+ * source and destination are swapped. The only exceptions are
+ * tunneling protocols 0x04 (IP in IP Encapsulation), 0x29 (Simple
+ * Internet Protocol), 0x2F (General Routing Encapsulation) and 0x32
+ * (Encap Security Payload), which use only the destination address
+ * since the source address is not meaningful.
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's 32-bit flow hash.
+ */
+static __inline unsigned int
+NETIO_PKT_FLOW_HASH(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_FLOW_HASH_M(mda, pkt);
+}
+
+
+/** Return the first word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the first
+ * word of user data contains the least significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_low()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's first word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_0(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_USER_DATA_0_M(mda, pkt);
+}
+
+
+/** Return the second word of "user data" for the packet.
+ *
+ * The contents of the user data words depend on the IPP.
+ *
+ * When using the standard ipp1, ipp2, or ipp4 sub-drivers, the second
+ * word of user data contains the most significant bits of the 64-bit
+ * arrival cycle count (see @c get_cycle_count_high()).
+ *
+ * See the <em>System Programmer's Guide</em> for details.
+ *
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return The packet's second word of "user data".
+ */
+static __inline unsigned int
+NETIO_PKT_USER_DATA_1(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_USER_DATA_1_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L4 checksum was calculated.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L4_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L4 (TCP/UDP) checksum was calculated and found to
+ * be correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L4_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L4_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the L3 (IP) checksum was calculated.
+*/
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CALCULATED(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_CSUM_CALCULATED_M(mda, pkt);
+}
+
+
+/** Determine whether the L3 (IP) checksum was calculated and found to be
+ * correct.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the checksum was calculated and is correct.
+ */
+static __inline unsigned int
+NETIO_PKT_L3_CSUM_CORRECT(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_L3_CSUM_CORRECT_M(mda, pkt);
+}
+
+
+/** Determine whether the Ethertype was recognized and L3 packet data was
+ * processed.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ * @return Nonzero if the Ethertype was recognized and L3 packet data was
+ * processed.
+ */
+static __inline unsigned int
+NETIO_PKT_ETHERTYPE_RECOGNIZED(netio_pkt_t* pkt)
+{
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_ETHERTYPE_RECOGNIZED_M(mda, pkt);
+}
+
+
+/** Set an egress packet's L2 length, using a metadata pointer to speed the
+ * computation.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt,
+ int len)
+{
+ mmd->l2_length = len;
+}
+
+
+/** Set an egress packet's L2 length.
+ * @ingroup egress
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_LENGTH(netio_pkt_t* pkt, int len)
+{
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ NETIO_PKT_SET_L2_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set an egress packet's L2 header length, using a metadata pointer to
+ * speed the computation.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet. It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt, int len)
+{
+ mmd->l3_offset = mmd->l2_offset + len;
+}
+
+
+/** Set an egress packet's L2 header length.
+ * @ingroup egress
+ *
+ * It is not normally necessary to call this routine; only the L2 length,
+ * not the header length, is needed to transmit a packet. It may be useful if
+ * the egress packet will later be processed by code which expects to use
+ * functions like @ref NETIO_PKT_L3_DATA() to get a pointer to the L3 payload.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] len Packet L2 header length, in bytes.
+ */
+static __inline void
+NETIO_PKT_SET_L2_HEADER_LENGTH(netio_pkt_t* pkt, int len)
+{
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ NETIO_PKT_SET_L2_HEADER_LENGTH_MM(mmd, pkt, len);
+}
+
+
+/** Set up an egress packet for hardware checksum computation, using a
+ * metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ * NetIO provides the ability to automatically calculate a standard
+ * 16-bit Internet checksum on transmitted packets. The application
+ * may specify the point in the packet where the checksum starts, the
+ * number of bytes to be checksummed, and the two bytes in the packet
+ * which will be replaced with the completed checksum. (If the range
+ * of bytes to be checksummed includes the bytes to be replaced, the
+ * initial values of those bytes will be included in the checksum.)
+ *
+ * For some protocols, the packet checksum covers data which is not present
+ * in the packet, or is at least not contiguous to the main data payload.
+ * For instance, the TCP checksum includes a "pseudo-header" which includes
+ * the source and destination IP addresses of the packet. To accommodate
+ * this, the checksum engine may be "seeded" with an initial value, which
+ * the application would need to compute based on the specific protocol's
+ * requirements. Note that the seed is given in host byte order (little-
+ * endian), not network byte order (big-endian); code written to compute a
+ * pseudo-header checksum in network byte order will need to byte-swap it
+ * before use as the seed.
+ *
+ * Note that the checksum is computed as part of the transmission process,
+ * so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ * the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ * the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ * to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ * packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt, int start, int length,
+ int location, uint16_t seed)
+{
+ mmd->csum_start = start;
+ mmd->csum_length = length;
+ mmd->csum_location = location;
+ mmd->csum_seed = seed;
+ mmd->flags |= _NETIO_PKT_NEED_EDMA_CSUM_MASK;
+}
+
+
+/** Set up an egress packet for hardware checksum computation.
+ * @ingroup egress
+ *
+ * NetIO provides the ability to automatically calculate a standard
+ * 16-bit Internet checksum on transmitted packets. The application
+ * may specify the point in the packet where the checksum starts, the
+ * number of bytes to be checksummed, and the two bytes in the packet
+ * which will be replaced with the completed checksum. (If the range
+ * of bytes to be checksummed includes the bytes to be replaced, the
+ * initial values of those bytes will be included in the checksum.)
+ *
+ * For some protocols, the packet checksum covers data which is not present
+ * in the packet, or is at least not contiguous to the main data payload.
+ * For instance, the TCP checksum includes a "pseudo-header" which includes
+ * the source and destination IP addresses of the packet. To accommodate
+ * this, the checksum engine may be "seeded" with an initial value, which
+ * the application would need to compute based on the specific protocol's
+ * requirements. Note that the seed is given in host byte order (little-
+ * endian), not network byte order (big-endian); code written to compute a
+ * pseudo-header checksum in network byte order will need to byte-swap it
+ * before use as the seed.
+ *
+ * Note that the checksum is computed as part of the transmission process,
+ * so it will not be present in the packet upon completion of this routine.
+ *
+ * @param[in,out] pkt Packet on which to operate.
+ * @param[in] start Offset within L2 packet of the first byte to include in
+ * the checksum.
+ * @param[in] length Number of bytes to include in the checksum.
+ * the checksum.
+ * @param[in] location Offset within L2 packet of the first of the two bytes
+ * to be replaced with the calculated checksum.
+ * @param[in] seed Initial value of the running checksum before any of the
+ * packet data is added.
+ */
+static __inline void
+NETIO_PKT_DO_EGRESS_CSUM(netio_pkt_t* pkt, int start, int length,
+ int location, uint16_t seed)
+{
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ NETIO_PKT_DO_EGRESS_CSUM_MM(mmd, pkt, start, length, location, seed);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ * metadata pointer to speed the operation.
+ * See @ref netio_populate_prepend_buffer() to get a full description of
+ * prepending.
+ *
+ * @param[in,out] mda Pointer to packet's standard metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+ return (pkt->__packet.bits.__offset << 6) +
+ NETIO_PKT_CUSTOM_HEADER_LENGTH_M(mda, pkt);
+}
+
+
+/** Return the number of bytes which could be prepended to a packet, using a
+ * metadata pointer to speed the operation.
+ * See @ref netio_populate_prepend_buffer() to get a full description of
+ * prepending.
+ * @ingroup egress
+ *
+ * @param[in,out] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL_MM(netio_pkt_minimal_metadata_t* mmd, netio_pkt_t* pkt)
+{
+ return (pkt->__packet.bits.__offset << 6) + mmd->l2_offset;
+}
+
+
+/** Return the number of bytes which could be prepended to a packet.
+ * See @ref netio_populate_prepend_buffer() to get a full description of
+ * prepending.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline int
+NETIO_PKT_PREPEND_AVAIL(netio_pkt_t* pkt)
+{
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd = NETIO_PKT_MINIMAL_METADATA(pkt);
+
+ return NETIO_PKT_PREPEND_AVAIL_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = NETIO_PKT_METADATA(pkt);
+
+ return NETIO_PKT_PREPEND_AVAIL_M(mda, pkt);
+ }
+}
+
+
+/** Flush a packet's minimal metadata from the cache, using a metadata pointer
+ * to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache, using a metadata
+ * pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache,
+ * using a metadata pointer to speed the operation.
+ * @ingroup egress
+ *
+ * @param[in] mmd Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA_MM(netio_pkt_minimal_metadata_t* mmd,
+ netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache, using a metadata pointer
+ * to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's minimal metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache, using a metadata
+ * pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache,
+ * using a metadata pointer to speed the operation.
+ * @ingroup ingress
+ *
+ * @param[in] mda Pointer to packet's metadata.
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA_M(netio_pkt_metadata_t* mda, netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's minimal metadata from the cache.
+ * @ingroup egress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_MINIMAL_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+
+/** Flush and then invalidate a packet's metadata from the cache.
+ * @ingroup ingress
+ *
+ * @param[in] pkt Packet on which to operate.
+ */
+static __inline void
+NETIO_PKT_FLUSH_INV_METADATA(netio_pkt_t* pkt)
+{
+}
+
+/** Number of NUMA nodes we can distribute buffers to.
+ * @ingroup setup */
+#define NETIO_NUM_NODE_WEIGHTS 16
+
+/**
+ * @brief An object for specifying the characteristics of NetIO communication
+ * endpoint.
+ *
+ * @ingroup setup
+ *
+ * The @ref netio_input_register() function uses this structure to define
+ * how an application tile will communicate with an IPP.
+ *
+ *
+ * Future updates to NetIO may add new members to this structure,
+ * which can affect the success of the registration operation. Thus,
+ * if dynamically initializing the structure, applications are urged to
+ * zero it out first, for example:
+ *
+ * @code
+ * netio_input_config_t config;
+ * memset(&config, 0, sizeof (config));
+ * config.flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE;
+ * config.num_receive_packets = NETIO_MAX_RECEIVE_PKTS;
+ * config.queue_id = 0;
+ * .
+ * .
+ * .
+ * @endcode
+ *
+ * since that guarantees that any unused structure members, including
+ * members which did not exist when the application was first developed,
+ * will not have unexpected values.
+ *
+ * If statically initializing the structure, we strongly recommend use of
+ * C99-style named initializers, for example:
+ *
+ * @code
+ * netio_input_config_t config = {
+ * .flags = NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE,
+ * .num_receive_packets = NETIO_MAX_RECEIVE_PKTS,
+ * .queue_id = 0,
+ * },
+ * @endcode
+ *
+ * instead of the old-style structure initialization:
+ *
+ * @code
+ * // Bad example! Currently equivalent to the above, but don't do this.
+ * netio_input_config_t config = {
+ * NETIO_RECV | NETIO_XMIT_CSUM | NETIO_TAG_NONE, NETIO_MAX_RECEIVE_PKTS, 0
+ * },
+ * @endcode
+ *
+ * since the C99 style requires no changes to the code if elements of the
+ * config structure are rearranged. (It also makes the initialization much
+ * easier to understand.)
+ *
+ * Except for items which address a particular tile's transmit or receive
+ * characteristics, such as the ::NETIO_RECV flag, applications are advised
+ * to specify the same set of configuration data on all registrations.
+ * This prevents differing results if multiple tiles happen to do their
+ * registration operations in a different order on different invocations of
+ * the application. This is particularly important for things like link
+ * management flags, and buffer size and homing specifications.
+ *
+ * Unless the ::NETIO_FIXED_BUFFER_VA flag is specified in flags, the NetIO
+ * buffer pool is automatically created and mapped into the application's
+ * virtual address space at an address chosen by the operating system,
+ * using the common memory (cmem) facility in the Tilera Multicore
+ * Components library. The cmem facility allows multiple processes to gain
+ * access to shared memory which is mapped into each process at an
+ * identical virtual address. In order for this to work, the processes
+ * must have a common ancestor, which must create the common memory using
+ * tmc_cmem_init().
+ *
+ * In programs using the iLib process creation API, or in programs which use
+ * only one process (which include programs using the pthreads library),
+ * tmc_cmem_init() is called automatically. All other applications
+ * must call it explicitly, before any child processes which might call
+ * netio_input_register() are created.
+ */
+typedef struct
+{
+ /** Registration characteristics.
+
+ This value determines several characteristics of the registration;
+ flags for different types of behavior are ORed together to make the
+ final flag value. Generally applications should specify exactly
+ one flag from each of the following categories:
+
+ - Whether the application will be receiving packets on this queue
+ (::NETIO_RECV or ::NETIO_NO_RECV).
+
+ - Whether the application will be transmitting packets on this queue,
+ and if so, whether it will request egress checksum calculation
+ (::NETIO_XMIT, ::NETIO_XMIT_CSUM, or ::NETIO_NO_XMIT). It is
+ legal to call netio_get_buffer() without one of the XMIT flags,
+ as long as ::NETIO_RECV is specified; in this case, the retrieved
+ buffers must be passed to another tile for transmission.
+
+ - Whether the application expects any vendor-specific tags in
+ its packets' L2 headers (::NETIO_TAG_NONE, ::NETIO_TAG_BRCM,
+ or ::NETIO_TAG_MRVL). This must match the configuration of the
+ target IPP.
+
+ To accommodate applications written to previous versions of the NetIO
+ interface, none of the flags above are currently required; if omitted,
+ NetIO behaves more or less as if ::NETIO_RECV | ::NETIO_XMIT_CSUM |
+ ::NETIO_TAG_NONE were used. However, explicit specification of
+ the relevant flags allows NetIO to do a better job of resource
+ allocation, allows earlier detection of certain configuration errors,
+ and may enable advanced features or higher performance in the future,
+ so their use is strongly recommended.
+
+ Note that specifying ::NETIO_NO_RECV along with ::NETIO_NO_XMIT
+ is a special case, intended primarily for use by programs which
+ retrieve network statistics or do link management operations.
+ When these flags are both specified, the resulting queue may not
+ be used with NetIO routines other than netio_get(), netio_set(),
+ and netio_input_unregister(). See @ref link for more information
+ on link management.
+
+ Other flags are optional; their use is described below.
+ */
+ int flags;
+
+ /** Interface name. This is a string which identifies the specific
+ Ethernet controller hardware to be used. The format of the string
+ is a device type and a device index, separated by a slash; so,
+ the first 10 Gigabit Ethernet controller is named "xgbe/0", while
+ the second 10/100/1000 Megabit Ethernet controller is named "gbe/1".
+ */
+ const char* interface;
+
+ /** Receive packet queue size. This specifies the maximum number
+ of ingress packets that can be received on this queue without
+ being retrieved by @ref netio_get_packet(). If the IPP's distribution
+ algorithm calls for a packet to be sent to this queue, and this
+ number of packets are already pending there, the new packet
+ will either be discarded, or sent to another tile registered
+ for the same queue_id (see @ref drops). This value must
+ be at least ::NETIO_MIN_RECEIVE_PKTS, can always be at least
+ ::NETIO_MAX_RECEIVE_PKTS, and may be larger than that on certain
+ interfaces.
+ */
+ int num_receive_packets;
+
+ /** The queue ID being requested. Legal values for this range from 0
+ to ::NETIO_MAX_QUEUE_ID, inclusive. ::NETIO_MAX_QUEUE_ID is always
+ greater than or equal to the number of tiles; this allows one queue
+ for each tile, plus at least one additional queue. Some applications
+ may wish to use the additional queue as a destination for unwanted
+ packets, since packets delivered to queues for which no tiles have
+ registered are discarded.
+ */
+ unsigned int queue_id;
+
+ /** Maximum number of small send buffers to be held in the local empty
+ buffer cache. This specifies the size of the area which holds
+ empty small egress buffers requested from the IPP but not yet
+ retrieved via @ref netio_get_buffer(). This value must be greater
+ than zero if the application will ever use @ref netio_get_buffer()
+ to allocate empty small egress buffers; it may be no larger than
+ ::NETIO_MAX_SEND_BUFFERS. See @ref epp for more details on empty
+ buffer caching.
+ */
+ int num_send_buffers_small_total;
+
+ /** Number of small send buffers to be preallocated at registration.
+ If this value is nonzero, the specified number of empty small egress
+ buffers will be requested from the IPP during the netio_input_register
+ operation; this may speed the execution of @ref netio_get_buffer().
+ This may be no larger than @ref num_send_buffers_small_total. See @ref
+ epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_small_prealloc;
+
+ /** Maximum number of large send buffers to be held in the local empty
+ buffer cache. This specifies the size of the area which holds empty
+ large egress buffers requested from the IPP but not yet retrieved via
+ @ref netio_get_buffer(). This value must be greater than zero if the
+ application will ever use @ref netio_get_buffer() to allocate empty
+ large egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+ See @ref epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_large_total;
+
+ /** Number of large send buffers to be preallocated at registration.
+ If this value is nonzero, the specified number of empty large egress
+ buffers will be requested from the IPP during the netio_input_register
+ operation; this may speed the execution of @ref netio_get_buffer().
+ This may be no larger than @ref num_send_buffers_large_total. See @ref
+ epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_large_prealloc;
+
+ /** Maximum number of jumbo send buffers to be held in the local empty
+ buffer cache. This specifies the size of the area which holds empty
+ jumbo egress buffers requested from the IPP but not yet retrieved via
+ @ref netio_get_buffer(). This value must be greater than zero if the
+ application will ever use @ref netio_get_buffer() to allocate empty
+ jumbo egress buffers; it may be no larger than ::NETIO_MAX_SEND_BUFFERS.
+ See @ref epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_jumbo_total;
+
+ /** Number of jumbo send buffers to be preallocated at registration.
+ If this value is nonzero, the specified number of empty jumbo egress
+ buffers will be requested from the IPP during the netio_input_register
+ operation; this may speed the execution of @ref netio_get_buffer().
+ This may be no larger than @ref num_send_buffers_jumbo_total. See @ref
+ epp for more details on empty buffer caching.
+ */
+ int num_send_buffers_jumbo_prealloc;
+
+ /** Total packet buffer size. This determines the total size, in bytes,
+ of the NetIO buffer pool. Note that the maximum number of available
+ buffers of each size is determined during hypervisor configuration
+ (see the <em>System Programmer's Guide</em> for details); this just
+ influences how much host memory is allocated for those buffers.
+
+ The buffer pool is allocated from common memory, which will be
+ automatically initialized if needed. If your buffer pool is larger
+ than 240 MB, you might need to explicitly call @c tmc_cmem_init(),
+ as described in the Application Libraries Reference Manual (UG227).
+
+ Packet buffers are currently allocated in chunks of 16 MB; this
+ value will be rounded up to the next larger multiple of 16 MB.
+ If this value is zero, a default of 32 MB will be used; this was
+ the value used by previous versions of NetIO. Note that taking this
+ default also affects the placement of buffers on Linux NUMA nodes.
+ See @ref buffer_node_weights for an explanation of buffer placement.
+
+ In order to successfully allocate packet buffers, Linux must have
+ available huge pages on the relevant Linux NUMA nodes. See the
+ <em>System Programmer's Guide</em> for information on configuring
+ huge page support in Linux.
+ */
+ uint64_t total_buffer_size;
+
+ /** Buffer placement weighting factors.
+
+ This array specifies the relative amount of buffering to place
+ on each of the available Linux NUMA nodes. This array is
+ indexed by the NUMA node, and the values in the array are
+ proportional to the amount of buffer space to allocate on that
+ node.
+
+ If memory striping is enabled in the Hypervisor, then there is
+ only one logical NUMA node (node 0). In that case, NetIO will by
+ default ignore the suggested buffer node weights, and buffers
+ will be striped across the physical memory controllers. See
+ UG209 System Programmer's Guide for a description of the
+ hypervisor option that controls memory striping.
+
+ If memory striping is disabled, then there are up to four NUMA
+ nodes, corresponding to the four DDRAM controllers in the TILE
+ processor architecture. See UG100 Tile Processor Architecture
+ Overview for a diagram showing the location of each of the DDRAM
+ controllers relative to the tile array.
+
+ For instance, if memory striping is disabled, the following
+ configuration strucure:
+
+ @code
+ netio_input_config_t config = {
+ .
+ .
+ .
+ .total_buffer_size = 4 * 16 * 1024 * 1024;
+ .buffer_node_weights = { 1, 0, 1, 0 },
+ },
+ @endcode
+
+ would result in 32 MB of buffers being placed on controller 0, and
+ 32 MB on controller 2. (Since buffers are allocated in units of
+ 16 MB, some sets of weights will not be able to be matched exactly.)
+
+ For the weights to be effective, @ref total_buffer_size must be
+ nonzero. If @ref total_buffer_size is zero, causing the default
+ 32 MB of buffer space to be used, then any specified weights will
+ be ignored, and buffers will positioned as they were in previous
+ versions of NetIO:
+
+ - For xgbe/0 and gbe/0, 16 MB of buffers will be placed on controller 1,
+ and the other 16 MB will be placed on controller 2.
+
+ - For xgbe/1 and gbe/1, 16 MB of buffers will be placed on controller 2,
+ and the other 16 MB will be placed on controller 3.
+
+ If @ref total_buffer_size is nonzero, but all weights are zero,
+ then all buffer space will be allocated on Linux NUMA node zero.
+
+ By default, the specified buffer placement is treated as a hint;
+ if sufficient free memory is not available on the specified
+ controllers, the buffers will be allocated elsewhere. However,
+ if the ::NETIO_STRICT_HOMING flag is specified in @ref flags, then a
+ failure to allocate buffer space exactly as requested will cause the
+ registration operation to fail with an error of ::NETIO_CANNOT_HOME.
+
+ Note that maximal network performance cannot be achieved with
+ only one memory controller.
+ */
+ uint8_t buffer_node_weights[NETIO_NUM_NODE_WEIGHTS];
+
+ /** Fixed virtual address for packet buffers. Only valid when
+ ::NETIO_FIXED_BUFFER_VA is specified in @ref flags; see the
+ description of that flag for details.
+ */
+ void* fixed_buffer_va;
+
+ /**
+ Maximum number of outstanding send packet requests. This value is
+ only relevant when an EPP is in use; it determines the number of
+ slots in the EPP's outgoing packet queue which this tile is allowed
+ to consume, and thus the number of packets which may be sent before
+ the sending tile must wait for an acknowledgment from the EPP.
+ Modifying this value is generally only helpful when using @ref
+ netio_send_packet_vector(), where it can help improve performance by
+ allowing a single vector send operation to process more packets.
+ Typically it is not specified, and the default, which divides the
+ outgoing packet slots evenly between all tiles on the chip, is used.
+
+ If a registration asks for more outgoing packet queue slots than are
+ available, ::NETIO_TOOMANY_XMIT will be returned. The total number
+ of packet queue slots which are available for all tiles for each EPP
+ is subject to change, but is currently ::NETIO_TOTAL_SENDS_OUTSTANDING.
+
+
+ This value is ignored if ::NETIO_XMIT is not specified in flags.
+ If you want to specify a large value here for a specific tile, you are
+ advised to specify NETIO_NO_XMIT on other, non-transmitting tiles so
+ that they do not consume a default number of packet slots. Any tile
+ transmitting is required to have at least ::NETIO_MIN_SENDS_OUTSTANDING
+ slots allocated to it; values less than that will be silently
+ increased by the NetIO library.
+ */
+ int num_sends_outstanding;
+}
+netio_input_config_t;
+
+
+/** Registration flags; used in the @ref netio_input_config_t structure.
+ * @addtogroup setup
+ */
+/** @{ */
+
+/** Fail a registration request if we can't put packet buffers
+ on the specified memory controllers. */
+#define NETIO_STRICT_HOMING 0x00000002
+
+/** This application expects no tags on its L2 headers. */
+#define NETIO_TAG_NONE 0x00000004
+
+/** This application expects Marvell extended tags on its L2 headers. */
+#define NETIO_TAG_MRVL 0x00000008
+
+/** This application expects Broadcom tags on its L2 headers. */
+#define NETIO_TAG_BRCM 0x00000010
+
+/** This registration may call routines which receive packets. */
+#define NETIO_RECV 0x00000020
+
+/** This registration may not call routines which receive packets. */
+#define NETIO_NO_RECV 0x00000040
+
+/** This registration may call routines which transmit packets. */
+#define NETIO_XMIT 0x00000080
+
+/** This registration may call routines which transmit packets with
+ checksum acceleration. */
+#define NETIO_XMIT_CSUM 0x00000100
+
+/** This registration may not call routines which transmit packets. */
+#define NETIO_NO_XMIT 0x00000200
+
+/** This registration wants NetIO buffers mapped at an application-specified
+ virtual address.
+
+ NetIO buffers are by default created by the TMC common memory facility,
+ which must be configured by a common ancestor of all processes sharing
+ a network interface. When this flag is specified, NetIO buffers are
+ instead mapped at an address chosen by the application (and specified
+ in @ref netio_input_config_t::fixed_buffer_va). This allows multiple
+ unrelated but cooperating processes to share a NetIO interface.
+ All processes sharing the same interface must specify this flag,
+ and all must specify the same fixed virtual address.
+
+ @ref netio_input_config_t::fixed_buffer_va must be a
+ multiple of 16 MB, and the packet buffers will occupy @ref
+ netio_input_config_t::total_buffer_size bytes of virtual address
+ space, beginning at that address. If any of those virtual addresses
+ are currently occupied by other memory objects, like application or
+ shared library code or data, @ref netio_input_register() will return
+ ::NETIO_FAULT. While it is impossible to provide a fixed_buffer_va
+ which will work for all applications, a good first guess might be to
+ use 0xb0000000 minus @ref netio_input_config_t::total_buffer_size.
+ If that fails, it might be helpful to consult the running application's
+ virtual address description file (/proc/<em>pid</em>/maps) to see
+ which regions of virtual address space are available.
+ */
+#define NETIO_FIXED_BUFFER_VA 0x00000400
+
+/** This registration call will not complete unless the network link
+ is up. The process will wait several seconds for this to happen (the
+ precise interval is link-dependent), but if the link does not come up,
+ ::NETIO_LINK_DOWN will be returned. This flag is the default if
+ ::NETIO_NOREQUIRE_LINK_UP is not specified. Note that this flag by
+ itself does not request that the link be brought up; that can be done
+ with the ::NETIO_AUTO_LINK_UPDN or ::NETIO_AUTO_LINK_UP flags (the
+ latter is the default if no NETIO_AUTO_LINK_xxx flags are specified),
+ or by explicitly setting the link's desired state via netio_set().
+ If the link is not brought up by one of those methods, and this flag
+ is specified, the registration operation will return ::NETIO_LINK_DOWN.
+ This flag is ignored if it is specified along with ::NETIO_NO_XMIT and
+ ::NETIO_NO_RECV. See @ref link for more information on link
+ management.
+ */
+#define NETIO_REQUIRE_LINK_UP 0x00000800
+
+/** This registration call will complete even if the network link is not up.
+ Whenever the link is not up, packets will not be sent or received:
+ netio_get_packet() will return ::NETIO_NOPKT once all queued packets
+ have been drained, and netio_send_packet() and similar routines will
+ return NETIO_QUEUE_FULL once the outgoing packet queue in the EPP
+ or the I/O shim is full. See @ref link for more information on link
+ management.
+ */
+#define NETIO_NOREQUIRE_LINK_UP 0x00001000
+
+#ifndef __DOXYGEN__
+/*
+ * These are part of the implementation of the NETIO_AUTO_LINK_xxx flags,
+ * but should not be used directly by applications, and are thus not
+ * documented.
+ */
+#define _NETIO_AUTO_UP 0x00002000
+#define _NETIO_AUTO_DN 0x00004000
+#define _NETIO_AUTO_PRESENT 0x00008000
+#endif
+
+/** Set the desired state of the link to up, allowing any speeds which are
+ supported by the link hardware, as part of this registration operation.
+ Do not take down the link automatically. This is the default if
+ no other NETIO_AUTO_LINK_xxx flags are specified. This flag is ignored
+ if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+ See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UP (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP)
+
+/** Set the desired state of the link to up, allowing any speeds which are
+ supported by the link hardware, as part of this registration operation.
+ Set the desired state of the link to down the next time no tiles are
+ registered for packet reception or transmission. This flag is ignored
+ if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+ See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_UPDN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_UP | \
+ _NETIO_AUTO_DN)
+
+/** Set the desired state of the link to down the next time no tiles are
+ registered for packet reception or transmission. This flag is ignored
+ if it is specified along with ::NETIO_NO_XMIT and ::NETIO_NO_RECV.
+ See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_DN (_NETIO_AUTO_PRESENT | _NETIO_AUTO_DN)
+
+/** Do not bring up the link automatically as part of this registration
+ operation. Do not take down the link automatically. This flag
+ is ignored if it is specified along with ::NETIO_NO_XMIT and
+ ::NETIO_NO_RECV. See @ref link for more information on link management.
+ */
+#define NETIO_AUTO_LINK_NONE _NETIO_AUTO_PRESENT
+
+
+/** Minimum number of receive packets. */
+#define NETIO_MIN_RECEIVE_PKTS 16
+
+/** Lower bound on the maximum number of receive packets; may be higher
+ than this on some interfaces. */
+#define NETIO_MAX_RECEIVE_PKTS 128
+
+/** Maximum number of send buffers, per packet size. */
+#define NETIO_MAX_SEND_BUFFERS 16
+
+/** Number of EPP queue slots, and thus outstanding sends, per EPP. */
+#define NETIO_TOTAL_SENDS_OUTSTANDING 2015
+
+/** Minimum number of EPP queue slots, and thus outstanding sends, per
+ * transmitting tile. */
+#define NETIO_MIN_SENDS_OUTSTANDING 16
+
+
+/**@}*/
+
+#ifndef __DOXYGEN__
+
+/**
+ * An object for providing Ethernet packets to a process.
+ */
+struct __netio_queue_impl_t;
+
+/**
+ * An object for managing the user end of a NetIO queue.
+ */
+struct __netio_queue_user_impl_t;
+
+#endif /* !__DOXYGEN__ */
+
+
+/** A netio_queue_t describes a NetIO communications endpoint.
+ * @ingroup setup
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ uint8_t opaque[8]; /**< This is an opaque structure. */
+#else
+ struct __netio_queue_impl_t* __system_part; /**< The system part. */
+ struct __netio_queue_user_impl_t* __user_part; /**< The user part. */
+#ifdef _NETIO_PTHREAD
+ _netio_percpu_mutex_t lock; /**< Queue lock. */
+#endif
+#endif
+}
+netio_queue_t;
+
+
+/**
+ * @brief Packet send context.
+ *
+ * @ingroup egress
+ *
+ * Packet send context for use with netio_send_packet_prepare and _commit.
+ */
+typedef struct
+{
+#ifdef __DOXYGEN__
+ uint8_t opaque[44]; /**< This is an opaque structure. */
+#else
+ uint8_t flags; /**< Defined below */
+ uint8_t datalen; /**< Number of valid words pointed to by data. */
+ uint32_t request[9]; /**< Request to be sent to the EPP or shim. Note
+ that this is smaller than the 11-word maximum
+ request size, since some constant values are
+ not saved in the context. */
+ uint32_t *data; /**< Data to be sent to the EPP or shim via IDN. */
+#endif
+}
+netio_send_pkt_context_t;
+
+
+#ifndef __DOXYGEN__
+#define SEND_PKT_CTX_USE_EPP 1 /**< We're sending to an EPP. */
+#define SEND_PKT_CTX_SEND_CSUM 2 /**< Request includes a checksum. */
+#endif
+
+/**
+ * @brief Packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * This data structure is used with netio_send_packet_vector() to send multiple
+ * packets with one NetIO call. The structure should be initialized by
+ * calling netio_pkt_vector_set(), rather than by setting the fields
+ * directly.
+ *
+ * This structure is guaranteed to be a power of two in size, no
+ * bigger than one L2 cache line, and to be aligned modulo its size.
+ */
+typedef struct
+#ifndef __DOXYGEN__
+__attribute__((aligned(8)))
+#endif
+{
+ /** Reserved for use by the user application. When initialized with
+ * the netio_set_pkt_vector_entry() function, this field is guaranteed
+ * to be visible to readers only after all other fields are already
+ * visible. This way it can be used as a valid flag or generation
+ * counter. */
+ uint8_t user_data;
+
+ /* Structure members below this point should not be accessed directly by
+ * applications, as they may change in the future. */
+
+ /** Low 8 bits of the packet address to send. The high bits are
+ * acquired from the 'handle' field. */
+ uint8_t buffer_address_low;
+
+ /** Number of bytes to transmit. */
+ uint16_t size;
+
+ /** The raw handle from a netio_pkt_t. If this is NETIO_PKT_HANDLE_NONE,
+ * this vector entry will be skipped and no packet will be transmitted. */
+ netio_pkt_handle_t handle;
+}
+netio_pkt_vector_entry_t;
+
+
+/**
+ * @brief Initialize fields in a packet vector entry.
+ *
+ * @ingroup egress
+ *
+ * @param[out] v Pointer to the vector entry to be initialized.
+ * @param[in] pkt Packet to be transmitted when the vector entry is passed to
+ * netio_send_packet_vector(). Note that the packet's attributes
+ * (e.g., its L2 offset and length) are captured at the time this
+ * routine is called; subsequent changes in those attributes will not
+ * be reflected in the packet which is actually transmitted.
+ * Changes in the packet's contents, however, will be so reflected.
+ * If this is NULL, no packet will be transmitted.
+ * @param[in] user_data User data to be set in the vector entry.
+ * This function guarantees that the "user_data" field will become
+ * visible to a reader only after all other fields have become visible.
+ * This allows a structure in a ring buffer to be written and read
+ * by a polling reader without any locks or other synchronization.
+ */
+static __inline void
+netio_pkt_vector_set(volatile netio_pkt_vector_entry_t* v, netio_pkt_t* pkt,
+ uint8_t user_data)
+{
+ if (pkt)
+ {
+ if (NETIO_PKT_IS_MINIMAL(pkt))
+ {
+ netio_pkt_minimal_metadata_t* mmd =
+ (netio_pkt_minimal_metadata_t*) &pkt->__metadata;
+ v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_MM(mmd, pkt) & 0xFF;
+ v->size = NETIO_PKT_L2_LENGTH_MM(mmd, pkt);
+ }
+ else
+ {
+ netio_pkt_metadata_t* mda = &pkt->__metadata;
+ v->buffer_address_low = (uintptr_t) NETIO_PKT_L2_DATA_M(mda, pkt) & 0xFF;
+ v->size = NETIO_PKT_L2_LENGTH_M(mda, pkt);
+ }
+ v->handle.word = pkt->__packet.word;
+ }
+ else
+ {
+ v->handle.word = 0; /* Set handle to NETIO_PKT_HANDLE_NONE. */
+ }
+
+ __asm__("" : : : "memory");
+
+ v->user_data = user_data;
+}
+
+
+/**
+ * Flags and structures for @ref netio_get() and @ref netio_set().
+ * @ingroup config
+ */
+
+/** @{ */
+/** Parameter class; addr is a NETIO_PARAM_xxx value. */
+#define NETIO_PARAM 0
+/** Interface MAC address. This address is only valid with @ref netio_get().
+ * The value is a 6-byte MAC address. Depending upon the overall system
+ * design, a MAC address may or may not be available for each interface. */
+#define NETIO_PARAM_MAC 0
+
+/** Determine whether to suspend output on the receipt of pause frames.
+ * If the value is nonzero, the I/O shim will suspend output when a pause
+ * frame is received. If the value is zero, pause frames will be ignored. */
+#define NETIO_PARAM_PAUSE_IN 1
+
+/** Determine whether to send pause frames if the I/O shim packet FIFOs are
+ * nearly full. If the value is zero, pause frames are not sent. If
+ * the value is nonzero, it is the delay value which will be sent in any
+ * pause frames which are output, in units of 512 bit times. */
+#define NETIO_PARAM_PAUSE_OUT 2
+
+/** Jumbo frame support. The value is a 4-byte integer. If the value is
+ * nonzero, the MAC will accept frames of up to 10240 bytes. If the value
+ * is zero, the MAC will only accept frames of up to 1544 bytes. */
+#define NETIO_PARAM_JUMBO 3
+
+/** I/O shim's overflow statistics register. The value is two 16-bit integers.
+ * The first 16-bit value (or the low 16 bits, if the value is treated as a
+ * 32-bit number) is the count of packets which were completely dropped and
+ * not delivered by the shim. The second 16-bit value (or the high 16 bits,
+ * if the value is treated as a 32-bit number) is the count of packets
+ * which were truncated and thus only partially delivered by the shim. This
+ * register is automatically reset to zero after it has been read.
+ */
+#define NETIO_PARAM_OVERFLOW 4
+
+/** IPP statistics. This address is only valid with @ref netio_get(). The
+ * value is a netio_stat_t structure. Unlike the I/O shim statistics, the
+ * IPP statistics are not all reset to zero on read; see the description
+ * of the netio_stat_t for details. */
+#define NETIO_PARAM_STAT 5
+
+/** Possible link state. The value is a combination of "NETIO_LINK_xxx"
+ * flags. With @ref netio_get(), this will indicate which flags are
+ * actually supported by the hardware.
+ *
+ * For historical reasons, specifying this value to netio_set() will have
+ * the same behavior as using ::NETIO_PARAM_LINK_CONFIG, but this usage is
+ * discouraged.
+ */
+#define NETIO_PARAM_LINK_POSSIBLE_STATE 6
+
+/** Link configuration. The value is a combination of "NETIO_LINK_xxx" flags.
+ * With @ref netio_set(), this will attempt to immediately bring up the
+ * link using whichever of the requested flags are supported by the
+ * hardware, or take down the link if the flags are zero; if this is
+ * not possible, an error will be returned. Many programs will want
+ * to use ::NETIO_PARAM_LINK_DESIRED_STATE instead.
+ *
+ * For historical reasons, specifying this value to netio_get() will
+ * have the same behavior as using ::NETIO_PARAM_LINK_POSSIBLE_STATE,
+ * but this usage is discouraged.
+ */
+#define NETIO_PARAM_LINK_CONFIG NETIO_PARAM_LINK_POSSIBLE_STATE
+
+/** Current link state. This address is only valid with @ref netio_get().
+ * The value is zero or more of the "NETIO_LINK_xxx" flags, ORed together.
+ * If the link is down, the value ANDed with NETIO_LINK_SPEED will be
+ * zero; if the link is up, the value ANDed with NETIO_LINK_SPEED will
+ * result in exactly one of the NETIO_LINK_xxx values, indicating the
+ * current speed. */
+#define NETIO_PARAM_LINK_CURRENT_STATE 7
+
+/** Variant symbol for current state, retained for compatibility with
+ * pre-MDE-2.1 programs. */
+#define NETIO_PARAM_LINK_STATUS NETIO_PARAM_LINK_CURRENT_STATE
+
+/** Packet Coherence protocol. This address is only valid with @ref netio_get().
+ * The value is nonzero if the interface is configured for cache-coherent DMA.
+ */
+#define NETIO_PARAM_COHERENT 8
+
+/** Desired link state. The value is a conbination of "NETIO_LINK_xxx"
+ * flags, which specify the desired state for the link. With @ref
+ * netio_set(), this will, in the background, attempt to bring up the link
+ * using whichever of the requested flags are reasonable, or take down the
+ * link if the flags are zero. The actual link up or down operation may
+ * happen after this call completes. If the link state changes in the
+ * future, the system will continue to try to get back to the desired link
+ * state; for instance, if the link is brought up successfully, and then
+ * the network cable is disconnected, the link will go down. However, the
+ * desired state of the link is still up, so if the cable is reconnected,
+ * the link will be brought up again.
+ *
+ * With @ref netio_get(), this will indicate the desired state for the
+ * link, as set with a previous netio_set() call, or implicitly by a
+ * netio_input_register() or netio_input_unregister() operation. This may
+ * not reflect the current state of the link; to get that, use
+ * ::NETIO_PARAM_LINK_CURRENT_STATE. */
+#define NETIO_PARAM_LINK_DESIRED_STATE 9
+
+/** NetIO statistics structure. Retrieved using the ::NETIO_PARAM_STAT
+ * address passed to @ref netio_get(). */
+typedef struct
+{
+ /** Number of packets which have been received by the IPP and forwarded
+ * to a tile's receive queue for processing. This value wraps at its
+ * maximum, and is not cleared upon read. */
+ uint32_t packets_received;
+
+ /** Number of packets which have been dropped by the IPP, because they could
+ * not be received, or could not be forwarded to a tile. The former happens
+ * when the IPP does not have a free packet buffer of suitable size for an
+ * incoming frame. The latter happens when all potential destination tiles
+ * for a packet, as defined by the group, bucket, and queue configuration,
+ * have full receive queues. This value wraps at its maximum, and is not
+ * cleared upon read. */
+ uint32_t packets_dropped;
+
+ /*
+ * Note: the #defines after each of the following four one-byte values
+ * denote their location within the third word of the netio_stat_t. They
+ * are intended for use only by the IPP implementation and are thus omitted
+ * from the Doxygen output.
+ */
+
+ /** Number of packets dropped because no worker was able to accept a new
+ * packet. This value saturates at its maximum, and is cleared upon
+ * read. */
+ uint8_t drops_no_worker;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_WORKER 0
+#endif
+
+ /** Number of packets dropped because no small buffers were available.
+ * This value saturates at its maximum, and is cleared upon read. */
+ uint8_t drops_no_smallbuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_SMALLBUF 1
+#endif
+
+ /** Number of packets dropped because no large buffers were available.
+ * This value saturates at its maximum, and is cleared upon read. */
+ uint8_t drops_no_largebuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_LARGEBUF 2
+#endif
+
+ /** Number of packets dropped because no jumbo buffers were available.
+ * This value saturates at its maximum, and is cleared upon read. */
+ uint8_t drops_no_jumbobuf;
+#ifndef __DOXYGEN__
+#define NETIO_STAT_DROPS_NO_JUMBOBUF 3
+#endif
+}
+netio_stat_t;
+
+
+/** Link can run, should run, or is running at 10 Mbps. */
+#define NETIO_LINK_10M 0x01
+
+/** Link can run, should run, or is running at 100 Mbps. */
+#define NETIO_LINK_100M 0x02
+
+/** Link can run, should run, or is running at 1 Gbps. */
+#define NETIO_LINK_1G 0x04
+
+/** Link can run, should run, or is running at 10 Gbps. */
+#define NETIO_LINK_10G 0x08
+
+/** Link should run at the highest speed supported by the link and by
+ * the device connected to the link. Only usable as a value for
+ * the link's desired state; never returned as a value for the current
+ * or possible states. */
+#define NETIO_LINK_ANYSPEED 0x10
+
+/** All legal link speeds. */
+#define NETIO_LINK_SPEED (NETIO_LINK_10M | \
+ NETIO_LINK_100M | \
+ NETIO_LINK_1G | \
+ NETIO_LINK_10G | \
+ NETIO_LINK_ANYSPEED)
+
+
+/** MAC register class. Addr is a register offset within the MAC.
+ * Registers within the XGbE and GbE MACs are documented in the Tile
+ * Processor I/O Device Guide (UG104). MAC registers start at address
+ * 0x4000, and do not include the MAC_INTERFACE registers. */
+#define NETIO_MAC 1
+
+/** MDIO register class (IEEE 802.3 clause 22 format). Addr is the "addr"
+ * member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO 2
+
+/** MDIO register class (IEEE 802.3 clause 45 format). Addr is the "addr"
+ * member of a netio_mdio_addr_t structure. */
+#define NETIO_MDIO_CLAUSE45 3
+
+/** NetIO MDIO address type. Retrieved or provided using the ::NETIO_MDIO
+ * address passed to @ref netio_get() or @ref netio_set(). */
+typedef union
+{
+ struct
+ {
+ unsigned int reg:16; /**< MDIO register offset. For clause 22 access,
+ must be less than 32. */
+ unsigned int phy:5; /**< Which MDIO PHY to access. */
+ unsigned int dev:5; /**< Which MDIO device to access within that PHY.
+ Applicable for clause 45 access only; ignored
+ for clause 22 access. */
+ }
+ bits; /**< Container for bitfields. */
+ uint64_t addr; /**< Value to pass to @ref netio_get() or
+ * @ref netio_set(). */
+}
+netio_mdio_addr_t;
+
+/** @} */
+
+#endif /* __NETIO_INTF_H__ */
diff --git a/arch/tile/kernel/Makefile b/arch/tile/kernel/Makefile
index 112b1e248f05..b4c8e8ec45dc 100644
--- a/arch/tile/kernel/Makefile
+++ b/arch/tile/kernel/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_SMP) += smpboot.o smp.o tlb.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
+obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/tile/kernel/compat_signal.c b/arch/tile/kernel/compat_signal.c
index 543d6a33aa26..dbb0dfc7bece 100644
--- a/arch/tile/kernel/compat_signal.c
+++ b/arch/tile/kernel/compat_signal.c
@@ -290,12 +290,12 @@ long compat_sys_sigaltstack(const struct compat_sigaltstack __user *uss_ptr,
return ret;
}
+/* The assembly shim for this function arranges to ignore the return value. */
long compat_sys_rt_sigreturn(struct pt_regs *regs)
{
struct compat_rt_sigframe __user *frame =
(struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
sigset_t set;
- long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
@@ -308,13 +308,13 @@ long compat_sys_rt_sigreturn(struct pt_regs *regs)
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
goto badframe;
- return r0;
+ return 0;
badframe:
force_sig(SIGSEGV, current);
diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S
index f5821626247f..5eed4a02bf62 100644
--- a/arch/tile/kernel/intvec_32.S
+++ b/arch/tile/kernel/intvec_32.S
@@ -1342,8 +1342,8 @@ handle_syscall:
lw r20, r20
/* Jump to syscall handler. */
- jalr r20; .Lhandle_syscall_link:
- FEEDBACK_REENTER(handle_syscall)
+ jalr r20
+.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */
/*
* Write our r0 onto the stack so it gets restored instead
@@ -1352,6 +1352,9 @@ handle_syscall:
PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
sw r29, r0
+.Lsyscall_sigreturn_skip:
+ FEEDBACK_REENTER(handle_syscall)
+
/* Do syscall trace again, if requested. */
lw r30, r31
andi r30, r30, _TIF_SYSCALL_TRACE
@@ -1536,9 +1539,24 @@ STD_ENTRY_LOCAL(bad_intr)
}; \
STD_ENDPROC(_##x)
+/*
+ * Special-case sigreturn to not write r0 to the stack on return.
+ * This is technically more efficient, but it also avoids difficulties
+ * in the 64-bit OS when handling 32-bit compat code, since we must not
+ * sign-extend r0 for the sigreturn return-value case.
+ */
+#define PTREGS_SYSCALL_SIGRETURN(x, reg) \
+ STD_ENTRY(_##x); \
+ addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \
+ { \
+ PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \
+ j x \
+ }; \
+ STD_ENDPROC(_##x)
+
PTREGS_SYSCALL(sys_execve, r3)
PTREGS_SYSCALL(sys_sigaltstack, r2)
-PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0)
PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1)
/* Save additional callee-saves to pt_regs, put address in r4 and jump. */
diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c
new file mode 100644
index 000000000000..a1ee25be9ad9
--- /dev/null
+++ b/arch/tile/kernel/pci.c
@@ -0,0 +1,621 @@
+/*
+ * Copyright 2010 Tilera Corporation. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/byteorder.h>
+#include <asm/hv_driver.h>
+#include <hv/drv_pcie_rc_intf.h>
+
+
+/*
+ * Initialization flow and process
+ * -------------------------------
+ *
+ * This files containes the routines to search for PCI buses,
+ * enumerate the buses, and configure any attached devices.
+ *
+ * There are two entry points here:
+ * 1) tile_pci_init
+ * This sets up the pci_controller structs, and opens the
+ * FDs to the hypervisor. This is called from setup_arch() early
+ * in the boot process.
+ * 2) pcibios_init
+ * This probes the PCI bus(es) for any attached hardware. It's
+ * called by subsys_initcall. All of the real work is done by the
+ * generic Linux PCI layer.
+ *
+ */
+
+/*
+ * This flag tells if the platform is TILEmpower that needs
+ * special configuration for the PLX switch chip.
+ */
+int __write_once tile_plx_gen1;
+
+static struct pci_controller controllers[TILE_NUM_PCIE];
+static int num_controllers;
+
+static struct pci_ops tile_cfg_ops;
+
+
+/*
+ * We don't need to worry about the alignment of resources.
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ return res->start;
+}
+EXPORT_SYMBOL(pcibios_align_resource);
+
+/*
+ * Open a FD to the hypervisor PCI device.
+ *
+ * controller_id is the controller number, config type is 0 or 1 for
+ * config0 or config1 operations.
+ */
+static int __init tile_pcie_open(int controller_id, int config_type)
+{
+ char filename[32];
+ int fd;
+
+ sprintf(filename, "pcie/%d/config%d", controller_id, config_type);
+
+ fd = hv_dev_open((HV_VirtAddr)filename, 0);
+
+ return fd;
+}
+
+
+/*
+ * Get the IRQ numbers from the HV and set up the handlers for them.
+ */
+static int __init tile_init_irqs(int controller_id,
+ struct pci_controller *controller)
+{
+ char filename[32];
+ int fd;
+ int ret;
+ int x;
+ struct pcie_rc_config rc_config;
+
+ sprintf(filename, "pcie/%d/ctl", controller_id);
+ fd = hv_dev_open((HV_VirtAddr)filename, 0);
+ if (fd < 0) {
+ pr_err("PCI: hv_dev_open(%s) failed\n", filename);
+ return -1;
+ }
+ ret = hv_dev_pread(fd, 0, (HV_VirtAddr)(&rc_config),
+ sizeof(rc_config), PCIE_RC_CONFIG_MASK_OFF);
+ hv_dev_close(fd);
+ if (ret != sizeof(rc_config)) {
+ pr_err("PCI: wanted %zd bytes, got %d\n",
+ sizeof(rc_config), ret);
+ return -1;
+ }
+ /* Record irq_base so that we can map INTx to IRQ # later. */
+ controller->irq_base = rc_config.intr;
+
+ for (x = 0; x < 4; x++)
+ tile_irq_activate(rc_config.intr + x,
+ TILE_IRQ_HW_CLEAR);
+
+ if (rc_config.plx_gen1)
+ controller->plx_gen1 = 1;
+
+ return 0;
+}
+
+/*
+ * First initialization entry point, called from setup_arch().
+ *
+ * Find valid controllers and fill in pci_controller structs for each
+ * of them.
+ *
+ * Returns the number of controllers discovered.
+ */
+int __init tile_pci_init(void)
+{
+ int i;
+
+ pr_info("PCI: Searching for controllers...\n");
+
+ /* Do any configuration we need before using the PCIe */
+
+ for (i = 0; i < TILE_NUM_PCIE; i++) {
+ int hv_cfg_fd0 = -1;
+ int hv_cfg_fd1 = -1;
+ int hv_mem_fd = -1;
+ char name[32];
+ struct pci_controller *controller;
+
+ /*
+ * Open the fd to the HV. If it fails then this
+ * device doesn't exist.
+ */
+ hv_cfg_fd0 = tile_pcie_open(i, 0);
+ if (hv_cfg_fd0 < 0)
+ continue;
+ hv_cfg_fd1 = tile_pcie_open(i, 1);
+ if (hv_cfg_fd1 < 0) {
+ pr_err("PCI: Couldn't open config fd to HV "
+ "for controller %d\n", i);
+ goto err_cont;
+ }
+
+ sprintf(name, "pcie/%d/mem", i);
+ hv_mem_fd = hv_dev_open((HV_VirtAddr)name, 0);
+ if (hv_mem_fd < 0) {
+ pr_err("PCI: Could not open mem fd to HV!\n");
+ goto err_cont;
+ }
+
+ pr_info("PCI: Found PCI controller #%d\n", i);
+
+ controller = &controllers[num_controllers];
+
+ if (tile_init_irqs(i, controller)) {
+ pr_err("PCI: Could not initialize "
+ "IRQs, aborting.\n");
+ goto err_cont;
+ }
+
+ controller->index = num_controllers;
+ controller->hv_cfg_fd[0] = hv_cfg_fd0;
+ controller->hv_cfg_fd[1] = hv_cfg_fd1;
+ controller->hv_mem_fd = hv_mem_fd;
+ controller->first_busno = 0;
+ controller->last_busno = 0xff;
+ controller->ops = &tile_cfg_ops;
+
+ num_controllers++;
+ continue;
+
+err_cont:
+ if (hv_cfg_fd0 >= 0)
+ hv_dev_close(hv_cfg_fd0);
+ if (hv_cfg_fd1 >= 0)
+ hv_dev_close(hv_cfg_fd1);
+ if (hv_mem_fd >= 0)
+ hv_dev_close(hv_mem_fd);
+ continue;
+ }
+
+ /*
+ * Before using the PCIe, see if we need to do any platform-specific
+ * configuration, such as the PLX switch Gen 1 issue on TILEmpower.
+ */
+ for (i = 0; i < num_controllers; i++) {
+ struct pci_controller *controller = &controllers[i];
+
+ if (controller->plx_gen1)
+ tile_plx_gen1 = 1;
+ }
+
+ return num_controllers;
+}
+
+/*
+ * (pin - 1) converts from the PCI standard's [1:4] convention to
+ * a normal [0:3] range.
+ */
+static int tile_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ struct pci_controller *controller =
+ (struct pci_controller *)dev->sysdata;
+ return (pin - 1) + controller->irq_base;
+}
+
+
+static void __init fixup_read_and_payload_sizes(void)
+{
+ struct pci_dev *dev = NULL;
+ int smallest_max_payload = 0x1; /* Tile maxes out at 256 bytes. */
+ int max_read_size = 0x2; /* Limit to 512 byte reads. */
+ u16 new_values;
+
+ /* Scan for the smallest maximum payload size. */
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ int pcie_caps_offset;
+ u32 devcap;
+ int max_payload;
+
+ pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pcie_caps_offset == 0)
+ continue;
+
+ pci_read_config_dword(dev, pcie_caps_offset + PCI_EXP_DEVCAP,
+ &devcap);
+ max_payload = devcap & PCI_EXP_DEVCAP_PAYLOAD;
+ if (max_payload < smallest_max_payload)
+ smallest_max_payload = max_payload;
+ }
+
+ /* Now, set the max_payload_size for all devices to that value. */
+ new_values = (max_read_size << 12) | (smallest_max_payload << 5);
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ int pcie_caps_offset;
+ u16 devctl;
+
+ pcie_caps_offset = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (pcie_caps_offset == 0)
+ continue;
+
+ pci_read_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+ &devctl);
+ devctl &= ~(PCI_EXP_DEVCTL_PAYLOAD | PCI_EXP_DEVCTL_READRQ);
+ devctl |= new_values;
+ pci_write_config_word(dev, pcie_caps_offset + PCI_EXP_DEVCTL,
+ devctl);
+ }
+}
+
+
+/*
+ * Second PCI initialization entry point, called by subsys_initcall.
+ *
+ * The controllers have been set up by the time we get here, by a call to
+ * tile_pci_init.
+ */
+static int __init pcibios_init(void)
+{
+ int i;
+
+ pr_info("PCI: Probing PCI hardware\n");
+
+ /*
+ * Delay a bit in case devices aren't ready. Some devices are
+ * known to require at least 20ms here, but we use a more
+ * conservative value.
+ */
+ mdelay(250);
+
+ /* Scan all of the recorded PCI controllers. */
+ for (i = 0; i < num_controllers; i++) {
+ struct pci_controller *controller = &controllers[i];
+ struct pci_bus *bus;
+
+ pr_info("PCI: initializing controller #%d\n", i);
+
+ /*
+ * This comes from the generic Linux PCI driver.
+ *
+ * It reads the PCI tree for this bus into the Linux
+ * data structures.
+ *
+ * This is inlined in linux/pci.h and calls into
+ * pci_scan_bus_parented() in probe.c.
+ */
+ bus = pci_scan_bus(0, controller->ops, controller);
+ controller->root_bus = bus;
+ controller->last_busno = bus->subordinate;
+
+ }
+
+ /* Do machine dependent PCI interrupt routing */
+ pci_fixup_irqs(pci_common_swizzle, tile_map_irq);
+
+ /*
+ * This comes from the generic Linux PCI driver.
+ *
+ * It allocates all of the resources (I/O memory, etc)
+ * associated with the devices read in above.
+ */
+
+ pci_assign_unassigned_resources();
+
+ /* Configure the max_read_size and max_payload_size values. */
+ fixup_read_and_payload_sizes();
+
+ /* Record the I/O resources in the PCI controller structure. */
+ for (i = 0; i < num_controllers; i++) {
+ struct pci_bus *root_bus = controllers[i].root_bus;
+ struct pci_bus *next_bus;
+ struct pci_dev *dev;
+
+ list_for_each_entry(dev, &root_bus->devices, bus_list) {
+ /* Find the PCI host controller, ie. the 1st bridge. */
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
+ (PCI_SLOT(dev->devfn) == 0)) {
+ next_bus = dev->subordinate;
+ controllers[i].mem_resources[0] =
+ *next_bus->resource[0];
+ controllers[i].mem_resources[1] =
+ *next_bus->resource[1];
+ controllers[i].mem_resources[2] =
+ *next_bus->resource[2];
+
+ break;
+ }
+ }
+
+ }
+
+ return 0;
+}
+subsys_initcall(pcibios_init);
+
+/*
+ * No bus fixups needed.
+ */
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ /* Nothing needs to be done. */
+}
+
+/*
+ * This can be called from the generic PCI layer, but doesn't need to
+ * do anything.
+ */
+char __devinit *pcibios_setup(char *str)
+{
+ /* Nothing needs to be done. */
+ return str;
+}
+
+/*
+ * This is called from the generic Linux layer.
+ */
+void __init pcibios_update_irq(struct pci_dev *dev, int irq)
+{
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
+}
+
+/*
+ * Enable memory and/or address decoding, as appropriate, for the
+ * device described by the 'dev' struct.
+ *
+ * This is called from the generic PCI layer, and can be called
+ * for bridges or endpoints.
+ */
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+ u16 cmd, old_cmd;
+ u8 header_type;
+ int i;
+ struct resource *r;
+
+ pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
+
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ old_cmd = cmd;
+ if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+ /*
+ * For bridges, we enable both memory and I/O decoding
+ * in call cases.
+ */
+ cmd |= PCI_COMMAND_IO;
+ cmd |= PCI_COMMAND_MEMORY;
+ } else {
+ /*
+ * For endpoints, we enable memory and/or I/O decoding
+ * only if they have a memory resource of that type.
+ */
+ for (i = 0; i < 6; i++) {
+ r = &dev->resource[i];
+ if (r->flags & IORESOURCE_UNSET) {
+ pr_err("PCI: Device %s not available "
+ "because of resource collisions\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+ if (r->flags & IORESOURCE_IO)
+ cmd |= PCI_COMMAND_IO;
+ if (r->flags & IORESOURCE_MEM)
+ cmd |= PCI_COMMAND_MEMORY;
+ }
+ }
+
+ /*
+ * We only write the command if it changed.
+ */
+ if (cmd != old_cmd)
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ return 0;
+}
+
+void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max)
+{
+ unsigned long start = pci_resource_start(dev, bar);
+ unsigned long len = pci_resource_len(dev, bar);
+ unsigned long flags = pci_resource_flags(dev, bar);
+
+ if (!len)
+ return NULL;
+ if (max && len > max)
+ len = max;
+
+ if (!(flags & IORESOURCE_MEM)) {
+ pr_info("PCI: Trying to map invalid resource %#lx\n", flags);
+ start = 0;
+ }
+
+ return (void __iomem *)start;
+}
+EXPORT_SYMBOL(pci_iomap);
+
+
+/****************************************************************
+ *
+ * Tile PCI config space read/write routines
+ *
+ ****************************************************************/
+
+/*
+ * These are the normal read and write ops
+ * These are expanded with macros from pci_bus_read_config_byte() etc.
+ *
+ * devfn is the combined PCI slot & function.
+ *
+ * offset is in bytes, from the start of config space for the
+ * specified bus & slot.
+ */
+
+static int __devinit tile_cfg_read(struct pci_bus *bus,
+ unsigned int devfn,
+ int offset,
+ int size,
+ u32 *val)
+{
+ struct pci_controller *controller = bus->sysdata;
+ int busnum = bus->number & 0xff;
+ int slot = (devfn >> 3) & 0x1f;
+ int function = devfn & 0x7;
+ u32 addr;
+ int config_mode = 1;
+
+ /*
+ * There is no bridge between the Tile and bus 0, so we
+ * use config0 to talk to bus 0.
+ *
+ * If we're talking to a bus other than zero then we
+ * must have found a bridge.
+ */
+ if (busnum == 0) {
+ /*
+ * We fake an empty slot for (busnum == 0) && (slot > 0),
+ * since there is only one slot on bus 0.
+ */
+ if (slot) {
+ *val = 0xFFFFFFFF;
+ return 0;
+ }
+ config_mode = 0;
+ }
+
+ addr = busnum << 20; /* Bus in 27:20 */
+ addr |= slot << 15; /* Slot (device) in 19:15 */
+ addr |= function << 12; /* Function is in 14:12 */
+ addr |= (offset & 0xFFF); /* byte address in 0:11 */
+
+ return hv_dev_pread(controller->hv_cfg_fd[config_mode], 0,
+ (HV_VirtAddr)(val), size, addr);
+}
+
+
+/*
+ * See tile_cfg_read() for relevent comments.
+ * Note that "val" is the value to write, not a pointer to that value.
+ */
+static int __devinit tile_cfg_write(struct pci_bus *bus,
+ unsigned int devfn,
+ int offset,
+ int size,
+ u32 val)
+{
+ struct pci_controller *controller = bus->sysdata;
+ int busnum = bus->number & 0xff;
+ int slot = (devfn >> 3) & 0x1f;
+ int function = devfn & 0x7;
+ u32 addr;
+ int config_mode = 1;
+ HV_VirtAddr valp = (HV_VirtAddr)&val;
+
+ /*
+ * For bus 0 slot 0 we use config 0 accesses.
+ */
+ if (busnum == 0) {
+ /*
+ * We fake an empty slot for (busnum == 0) && (slot > 0),
+ * since there is only one slot on bus 0.
+ */
+ if (slot)
+ return 0;
+ config_mode = 0;
+ }
+
+ addr = busnum << 20; /* Bus in 27:20 */
+ addr |= slot << 15; /* Slot (device) in 19:15 */
+ addr |= function << 12; /* Function is in 14:12 */
+ addr |= (offset & 0xFFF); /* byte address in 0:11 */
+
+#ifdef __BIG_ENDIAN
+ /* Point to the correct part of the 32-bit "val". */
+ valp += 4 - size;
+#endif
+
+ return hv_dev_pwrite(controller->hv_cfg_fd[config_mode], 0,
+ valp, size, addr);
+}
+
+
+static struct pci_ops tile_cfg_ops = {
+ .read = tile_cfg_read,
+ .write = tile_cfg_write,
+};
+
+
+/*
+ * In the following, each PCI controller's mem_resources[1]
+ * represents its (non-prefetchable) PCI memory resource.
+ * mem_resources[0] and mem_resources[2] refer to its PCI I/O and
+ * prefetchable PCI memory resources, respectively.
+ * For more details, see pci_setup_bridge() in setup-bus.c.
+ * By comparing the target PCI memory address against the
+ * end address of controller 0, we can determine the controller
+ * that should accept the PCI memory access.
+ */
+#define TILE_READ(size, type) \
+type _tile_read##size(unsigned long addr) \
+{ \
+ type val; \
+ int idx = 0; \
+ if (addr > controllers[0].mem_resources[1].end && \
+ addr > controllers[0].mem_resources[2].end) \
+ idx = 1; \
+ if (hv_dev_pread(controllers[idx].hv_mem_fd, 0, \
+ (HV_VirtAddr)(&val), sizeof(type), addr)) \
+ pr_err("PCI: read %zd bytes at 0x%lX failed\n", \
+ sizeof(type), addr); \
+ return val; \
+} \
+EXPORT_SYMBOL(_tile_read##size)
+
+TILE_READ(b, u8);
+TILE_READ(w, u16);
+TILE_READ(l, u32);
+TILE_READ(q, u64);
+
+#define TILE_WRITE(size, type) \
+void _tile_write##size(type val, unsigned long addr) \
+{ \
+ int idx = 0; \
+ if (addr > controllers[0].mem_resources[1].end && \
+ addr > controllers[0].mem_resources[2].end) \
+ idx = 1; \
+ if (hv_dev_pwrite(controllers[idx].hv_mem_fd, 0, \
+ (HV_VirtAddr)(&val), sizeof(type), addr)) \
+ pr_err("PCI: write %zd bytes at 0x%lX failed\n", \
+ sizeof(type), addr); \
+} \
+EXPORT_SYMBOL(_tile_write##size)
+
+TILE_WRITE(b, u8);
+TILE_WRITE(w, u16);
+TILE_WRITE(l, u32);
+TILE_WRITE(q, u64);
diff --git a/arch/tile/kernel/process.c b/arch/tile/kernel/process.c
index 8430f45daea6..e90eb53173b0 100644
--- a/arch/tile/kernel/process.c
+++ b/arch/tile/kernel/process.c
@@ -212,6 +212,13 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
childregs->sp = sp; /* override with new user stack pointer */
/*
+ * If CLONE_SETTLS is set, set "tp" in the new task to "r4",
+ * which is passed in as arg #5 to sys_clone().
+ */
+ if (clone_flags & CLONE_SETTLS)
+ childregs->tp = regs->regs[4];
+
+ /*
* Copy the callee-saved registers from the passed pt_regs struct
* into the context-switch callee-saved registers area.
* This way when we start the interrupt-return sequence, the
@@ -539,6 +546,7 @@ struct task_struct *__sched _switch_to(struct task_struct *prev,
return __switch_to(prev, next, next_current_ksp0(next));
}
+/* Note there is an implicit fifth argument if (clone_flags & CLONE_SETTLS). */
SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp,
void __user *, parent_tidptr, void __user *, child_tidptr,
struct pt_regs *, regs)
diff --git a/arch/tile/kernel/setup.c b/arch/tile/kernel/setup.c
index fb0b3cbeae14..f18573643ed1 100644
--- a/arch/tile/kernel/setup.c
+++ b/arch/tile/kernel/setup.c
@@ -840,7 +840,7 @@ static int __init topology_init(void)
for_each_online_node(i)
register_one_node(i);
- for_each_present_cpu(i)
+ for (i = 0; i < smp_height * smp_width; ++i)
register_cpu(&cpu_devices[i], i);
return 0;
diff --git a/arch/tile/kernel/signal.c b/arch/tile/kernel/signal.c
index 757407e36696..1260321155f1 100644
--- a/arch/tile/kernel/signal.c
+++ b/arch/tile/kernel/signal.c
@@ -52,7 +52,7 @@ SYSCALL_DEFINE3(sigaltstack, const stack_t __user *, uss,
*/
int restore_sigcontext(struct pt_regs *regs,
- struct sigcontext __user *sc, long *pr0)
+ struct sigcontext __user *sc)
{
int err = 0;
int i;
@@ -75,17 +75,15 @@ int restore_sigcontext(struct pt_regs *regs,
regs->faultnum = INT_SWINT_1_SIGRETURN;
- err |= __get_user(*pr0, &sc->gregs[0]);
return err;
}
-/* sigreturn() returns long since it restores r0 in the interrupted code. */
+/* The assembly shim for this function arranges to ignore the return value. */
SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->sp);
sigset_t set;
- long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
@@ -98,13 +96,13 @@ SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
recalc_sigpending();
spin_unlock_irq(&current->sighand->siglock);
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
goto badframe;
- return r0;
+ return 0;
badframe:
force_sig(SIGSEGV, current);
diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c
index 6235283b4859..cc3d9badf030 100644
--- a/arch/tile/lib/memchr_32.c
+++ b/arch/tile/lib/memchr_32.c
@@ -18,12 +18,24 @@
void *memchr(const void *s, int c, size_t n)
{
+ const uint32_t *last_word_ptr;
+ const uint32_t *p;
+ const char *last_byte_ptr;
+ uintptr_t s_int;
+ uint32_t goal, before_mask, v, bits;
+ char *ret;
+
+ if (__builtin_expect(n == 0, 0)) {
+ /* Don't dereference any memory if the array is empty. */
+ return NULL;
+ }
+
/* Get an aligned pointer. */
- const uintptr_t s_int = (uintptr_t) s;
- const uint32_t *p = (const uint32_t *)(s_int & -4);
+ s_int = (uintptr_t) s;
+ p = (const uint32_t *)(s_int & -4);
/* Create four copies of the byte for which we are looking. */
- const uint32_t goal = 0x01010101 * (uint8_t) c;
+ goal = 0x01010101 * (uint8_t) c;
/* Read the first word, but munge it so that bytes before the array
* will not match goal.
@@ -31,23 +43,14 @@ void *memchr(const void *s, int c, size_t n)
* Note that this shift count expression works because we know
* shift counts are taken mod 32.
*/
- const uint32_t before_mask = (1 << (s_int << 3)) - 1;
- uint32_t v = (*p | before_mask) ^ (goal & before_mask);
+ before_mask = (1 << (s_int << 3)) - 1;
+ v = (*p | before_mask) ^ (goal & before_mask);
/* Compute the address of the last byte. */
- const char *const last_byte_ptr = (const char *)s + n - 1;
+ last_byte_ptr = (const char *)s + n - 1;
/* Compute the address of the word containing the last byte. */
- const uint32_t *const last_word_ptr =
- (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
-
- uint32_t bits;
- char *ret;
-
- if (__builtin_expect(n == 0, 0)) {
- /* Don't dereference any memory if the array is empty. */
- return NULL;
- }
+ last_word_ptr = (const uint32_t *)((uintptr_t) last_byte_ptr & -4);
while ((bits = __insn_seqb(v, goal)) == 0) {
if (__builtin_expect(p == last_word_ptr, 0)) {
diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c
index 485e24d62c6b..5cd1c4004eca 100644
--- a/arch/tile/lib/spinlock_32.c
+++ b/arch/tile/lib/spinlock_32.c
@@ -167,23 +167,30 @@ void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val)
* when we compare them.
*/
u32 my_ticket_;
+ u32 iterations = 0;
- /* Take out the next ticket; this will also stop would-be readers. */
- if (val & 1)
- val = get_rwlock(rwlock);
- rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
+ /*
+ * Wait until there are no readers, then bump up the next
+ * field and capture the ticket value.
+ */
+ for (;;) {
+ if (!(val & 1)) {
+ if ((val >> RD_COUNT_SHIFT) == 0)
+ break;
+ rwlock->lock = val;
+ }
+ delay_backoff(iterations++);
+ val = __insn_tns((int *)&rwlock->lock);
+ }
- /* Extract my ticket value from the original word. */
+ /* Take out the next ticket and extract my ticket value. */
+ rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT);
my_ticket_ = val >> WR_NEXT_SHIFT;
- /*
- * Wait until the "current" field matches our ticket, and
- * there are no remaining readers.
- */
+ /* Wait until the "current" field matches our ticket. */
for (;;) {
u32 curr_ = val >> WR_CURR_SHIFT;
- u32 readers = val >> RD_COUNT_SHIFT;
- u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers;
+ u32 delta = ((my_ticket_ - curr_) & WR_MASK);
if (likely(delta == 0))
break;