summaryrefslogtreecommitdiff
path: root/arch/sh
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh')
-rw-r--r--arch/sh/Kconfig1
-rw-r--r--arch/sh/Kconfig.debug2
-rw-r--r--arch/sh/boards/board-sh7757lcr.c2
-rw-r--r--arch/sh/boards/mach-ap325rxa/setup.c32
-rw-r--r--arch/sh/boards/mach-dreamcast/irq.c2
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c20
-rw-r--r--arch/sh/boards/mach-landisk/setup.c5
-rw-r--r--arch/sh/drivers/pci/pci-sh7751.h2
-rw-r--r--arch/sh/drivers/pci/pci.c2
-rw-r--r--arch/sh/include/asm/page.h2
-rw-r--r--arch/sh/include/asm/pgtable_32.h2
-rw-r--r--arch/sh/include/asm/unaligned-sh4a.h2
-rw-r--r--arch/sh/include/mach-common/mach/highlander.h4
-rw-r--r--arch/sh/include/mach-common/mach/r2d.h6
-rw-r--r--arch/sh/kernel/cpu/clock-cpg.c2
-rw-r--r--arch/sh/kernel/cpu/sh4a/setup-sh7786.c2
-rw-r--r--arch/sh/kernel/irq.c2
-rw-r--r--arch/sh/kernel/setup.c2
-rw-r--r--arch/sh/lib64/copy_user_memcpy.S2
-rw-r--r--arch/sh/lib64/memcpy.S2
20 files changed, 65 insertions, 31 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index bc439de48cd1..4b89da248d17 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -24,6 +24,7 @@ config SUPERH
select RTC_LIB
select GENERIC_ATOMIC64
select GENERIC_IRQ_SHOW
+ select ARCH_NO_SYSDEV_OPS
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 12fec72fec5f..1553d56cf4e0 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -82,7 +82,7 @@ config SH_NO_BSS_INIT
help
If running in painfully slow environments, such as an RTL
simulation or from remote memory via SHdebug, where the memory
- can already be gauranteed to ber zeroed on boot, say Y.
+ can already be guaranteed to ber zeroed on boot, say Y.
For all other cases, say N. If this option seems perplexing, or
you aren't sure, say N.
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index a9e33569ad38..fa2a208ec6cb 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
-#include <linux/mfd/sh_mobile_sdhi.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
#include <cpu/sh7757.h>
#include <asm/sh_eth.h>
#include <asm/heartbeat.h>
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 636d8318a72a..618bd566cf53 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -156,24 +156,34 @@ static struct platform_device nand_flash_device = {
#define PORT_DRVCRA 0xA405018A
#define PORT_DRVCRB 0xA405018C
+static int ap320_wvga_set_brightness(void *board_data, int brightness)
+{
+ if (brightness) {
+ gpio_set_value(GPIO_PTS3, 0);
+ __raw_writew(0x100, FPGA_BKLREG);
+ } else {
+ __raw_writew(0, FPGA_BKLREG);
+ gpio_set_value(GPIO_PTS3, 1);
+ }
+
+ return 0;
+}
+
+static int ap320_wvga_get_brightness(void *board_data)
+{
+ return gpio_get_value(GPIO_PTS3);
+}
+
static void ap320_wvga_power_on(void *board_data, struct fb_info *info)
{
msleep(100);
/* ASD AP-320/325 LCD ON */
__raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG);
-
- /* backlight */
- gpio_set_value(GPIO_PTS3, 0);
- __raw_writew(0x100, FPGA_BKLREG);
}
static void ap320_wvga_power_off(void *board_data)
{
- /* backlight */
- __raw_writew(0, FPGA_BKLREG);
- gpio_set_value(GPIO_PTS3, 1);
-
/* ASD AP-320/325 LCD OFF */
__raw_writew(0, FPGA_LCDREG);
}
@@ -209,6 +219,12 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.board_cfg = {
.display_on = ap320_wvga_power_on,
.display_off = ap320_wvga_power_off,
+ .set_brightness = ap320_wvga_set_brightness,
+ .get_brightness = ap320_wvga_get_brightness,
+ },
+ .bl_info = {
+ .name = "sh_mobile_lcdc_bl",
+ .max_brightness = 1,
},
}
};
diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c
index 78cf2ab89d7a..f63d323f411f 100644
--- a/arch/sh/boards/mach-dreamcast/irq.c
+++ b/arch/sh/boards/mach-dreamcast/irq.c
@@ -51,7 +51,7 @@
*/
#define LEVEL(event) (((event) - HW_EVENT_IRQ_BASE) / 32)
-/* Return the hardware event's bit positon within the EMR/ESR */
+/* Return the hardware event's bit position within the EMR/ESR */
#define EVENT_BIT(event) (((event) - HW_EVENT_IRQ_BASE) & 31)
/*
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index fd4ff25f23b2..86a0d565aded 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -263,6 +263,18 @@ const static struct fb_videomode ecovec_dvi_modes[] = {
},
};
+static int ecovec24_set_brightness(void *board_data, int brightness)
+{
+ gpio_set_value(GPIO_PTR1, brightness);
+
+ return 0;
+}
+
+static int ecovec24_get_brightness(void *board_data)
+{
+ return gpio_get_value(GPIO_PTR1);
+}
+
static struct sh_mobile_lcdc_info lcdc_info = {
.ch[0] = {
.interface_type = RGB18,
@@ -273,6 +285,12 @@ static struct sh_mobile_lcdc_info lcdc_info = {
.height = 91,
},
.board_cfg = {
+ .set_brightness = ecovec24_set_brightness,
+ .get_brightness = ecovec24_get_brightness,
+ },
+ .bl_info = {
+ .name = "sh_mobile_lcdc_bl",
+ .max_brightness = 1,
},
}
};
@@ -936,7 +954,7 @@ static void __init sh_eth_init(struct sh_eth_plat_data *pd)
return;
}
- /* read MAC address frome EEPROM */
+ /* read MAC address from EEPROM */
for (i = 0; i < sizeof(pd->mac_addr); i++) {
pd->mac_addr[i] = mac_read(a, 0x10 + i);
msleep(10);
diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c
index 94186cf079b6..f1147caebacf 100644
--- a/arch/sh/boards/mach-landisk/setup.c
+++ b/arch/sh/boards/mach-landisk/setup.c
@@ -23,7 +23,7 @@
static void landisk_power_off(void)
{
- __raw_writeb(0x01, PA_SHUTDOWN);
+ __raw_writeb(0x01, PA_SHUTDOWN);
}
static struct resource cf_ide_resources[3];
@@ -85,7 +85,7 @@ device_initcall(landisk_devices_setup);
static void __init landisk_setup(char **cmdline_p)
{
- /* LED ON */
+ /* LED ON */
__raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED);
printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
@@ -97,7 +97,6 @@ static void __init landisk_setup(char **cmdline_p)
*/
static struct sh_machine_vector mv_landisk __initmv = {
.mv_name = "LANDISK",
- .mv_nr_irqs = 72,
.mv_setup = landisk_setup,
.mv_init_irq = init_landisk_IRQ,
};
diff --git a/arch/sh/drivers/pci/pci-sh7751.h b/arch/sh/drivers/pci/pci-sh7751.h
index 4983a4d20355..5ede38c330d3 100644
--- a/arch/sh/drivers/pci/pci-sh7751.h
+++ b/arch/sh/drivers/pci/pci-sh7751.h
@@ -61,7 +61,7 @@
#define SH7751_PCICONF3_BIST7 0x80000000 /* Bist Supported */
#define SH7751_PCICONF3_BIST6 0x40000000 /* Bist Executing */
#define SH7751_PCICONF3_BIST3_0 0x0F000000 /* Bist Passed */
- #define SH7751_PCICONF3_HD7 0x00800000 /* Single Funtion device */
+ #define SH7751_PCICONF3_HD7 0x00800000 /* Single Function device */
#define SH7751_PCICONF3_HD6_0 0x007F0000 /* Configuration Layout */
#define SH7751_PCICONF3_LAT 0x0000FF00 /* Latency Timer */
#define SH7751_PCICONF3_CLS 0x000000FF /* Cache Line Size */
diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c
index a09c77dd09db..194231cb5a70 100644
--- a/arch/sh/drivers/pci/pci.c
+++ b/arch/sh/drivers/pci/pci.c
@@ -84,7 +84,7 @@ int __devinit register_pci_controller(struct pci_channel *hose)
hose_tail = &hose->next;
/*
- * Do not panic here but later - this might hapen before console init.
+ * Do not panic here but later - this might happen before console init.
*/
if (!hose->io_map_base) {
printk(KERN_WARNING
diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h
index c4e0b3d472b9..822d6084195b 100644
--- a/arch/sh/include/asm/page.h
+++ b/arch/sh/include/asm/page.h
@@ -186,7 +186,7 @@ typedef struct page *pgtable_t;
/*
* While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still
* happily generate {ld/st}.q pairs, requiring us to have 8-byte
- * alignment to avoid traps. The kmalloc alignment is gauranteed by
+ * alignment to avoid traps. The kmalloc alignment is guaranteed by
* virtue of L1_CACHE_BYTES, requiring this to only be special cased
* for slab caches.
*/
diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h
index b799fe71114c..0bce3d81569e 100644
--- a/arch/sh/include/asm/pgtable_32.h
+++ b/arch/sh/include/asm/pgtable_32.h
@@ -167,7 +167,7 @@ static inline unsigned long copy_ptea_attributes(unsigned long x)
#endif
/*
- * Mask of bits that are to be preserved accross pgprot changes.
+ * Mask of bits that are to be preserved across pgprot changes.
*/
#define _PAGE_CHG_MASK \
(PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | \
diff --git a/arch/sh/include/asm/unaligned-sh4a.h b/arch/sh/include/asm/unaligned-sh4a.h
index c48a9c3420da..95adc500cabc 100644
--- a/arch/sh/include/asm/unaligned-sh4a.h
+++ b/arch/sh/include/asm/unaligned-sh4a.h
@@ -9,7 +9,7 @@
* struct.
*
* The same note as with the movli.l/movco.l pair applies here, as long
- * as the load is gauranteed to be inlined, nothing else will hook in to
+ * as the load is guaranteed to be inlined, nothing else will hook in to
* r0 and we get the return value for free.
*
* NOTE: Due to the fact we require r0 encoding, care should be taken to
diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h
index 5d9d4d5154be..6ce944e33e59 100644
--- a/arch/sh/include/mach-common/mach/highlander.h
+++ b/arch/sh/include/mach-common/mach/highlander.h
@@ -24,7 +24,7 @@
#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
@@ -89,7 +89,7 @@
#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
-#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
+#define PA_EXTPLR (PA_BCR+0x001e) /* Extension Pin Polarity control */
#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
diff --git a/arch/sh/include/mach-common/mach/r2d.h b/arch/sh/include/mach-common/mach/r2d.h
index 0a800157b826..e04f75eaa153 100644
--- a/arch/sh/include/mach-common/mach/r2d.h
+++ b/arch/sh/include/mach-common/mach/r2d.h
@@ -18,18 +18,18 @@
#define PA_DISPCTL 0xa4000008 /* Display Timing control */
#define PA_SDMPOW 0xa400000a /* SD Power control */
#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
-#define PA_PCICD 0xa400000e /* PCI Extention detect control */
+#define PA_PCICD 0xa400000e /* PCI Extension detect control */
#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */
#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */
#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */
-#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */
+#define PA_R2D1_EXTRST 0xa4000028 /* Extension Reset control */
#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */
#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */
-#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */
+#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extension Reset control */
#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
diff --git a/arch/sh/kernel/cpu/clock-cpg.c b/arch/sh/kernel/cpu/clock-cpg.c
index dd0e0f211359..8f63a264a842 100644
--- a/arch/sh/kernel/cpu/clock-cpg.c
+++ b/arch/sh/kernel/cpu/clock-cpg.c
@@ -67,7 +67,7 @@ int __init __deprecated cpg_clk_init(void)
}
/*
- * Placeholder for compatability, until the lazy CPUs do this
+ * Placeholder for compatibility, until the lazy CPUs do this
* on their own.
*/
int __init __weak arch_clk_init(void)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
index 1656b8c91faf..beba32beb6d9 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7786.c
@@ -648,7 +648,7 @@ static void __init sh7786_usb_setup(void)
* The following settings are necessary
* for using the USB modules.
*
- * see "USB Inital Settings" for detail
+ * see "USB Initial Settings" for detail
*/
__raw_writel(USBINITVAL1, USBINITREG1);
__raw_writel(USBINITVAL2, USBINITREG2);
diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c
index 64ea0b165399..91971103b62b 100644
--- a/arch/sh/kernel/irq.c
+++ b/arch/sh/kernel/irq.c
@@ -183,7 +183,7 @@ asmlinkage void do_softirq(void)
);
/*
- * Shouldnt happen, we returned above if in_interrupt():
+ * Shouldn't happen, we returned above if in_interrupt():
*/
WARN_ON_ONCE(softirq_count());
}
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 4f267160c515..58bff45d1156 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -150,7 +150,7 @@ void __init check_for_initrd(void)
}
/*
- * If we got this far inspite of the boot loader's best efforts
+ * If we got this far in spite of the boot loader's best efforts
* to the contrary, assume we actually have a valid initrd and
* fix up the root dev.
*/
diff --git a/arch/sh/lib64/copy_user_memcpy.S b/arch/sh/lib64/copy_user_memcpy.S
index 2a62816d2ddd..49aeabeba2c2 100644
--- a/arch/sh/lib64/copy_user_memcpy.S
+++ b/arch/sh/lib64/copy_user_memcpy.S
@@ -27,7 +27,7 @@
! 2.: When there are two or three bytes in the last word of an 11-or-more
! bytes memory chunk to b copied, the rest of the word can be read
! without side effects.
-! This could be easily changed by increasing the minumum size of
+! This could be easily changed by increasing the minimum size of
! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
! however, this would cost a few extra cyles on average.
! For SHmedia, the assumption is that any quadword can be read in its
diff --git a/arch/sh/lib64/memcpy.S b/arch/sh/lib64/memcpy.S
index dd300c372ce1..5d682e0ee24f 100644
--- a/arch/sh/lib64/memcpy.S
+++ b/arch/sh/lib64/memcpy.S
@@ -29,7 +29,7 @@
! 2.: When there are two or three bytes in the last word of an 11-or-more
! bytes memory chunk to b copied, the rest of the word can be read
! without side effects.
-! This could be easily changed by increasing the minumum size of
+! This could be easily changed by increasing the minimum size of
! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2,
! however, this would cost a few extra cyles on average.
! For SHmedia, the assumption is that any quadword can be read in its
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 14:46:44 +0300