summaryrefslogtreecommitdiff
path: root/arch/sh/drivers/pci/pci-sh5.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/drivers/pci/pci-sh5.c')
-rw-r--r--arch/sh/drivers/pci/pci-sh5.c228
1 files changed, 228 insertions, 0 deletions
diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c
new file mode 100644
index 000000000000..a00a4df8c02d
--- /dev/null
+++ b/arch/sh/drivers/pci/pci-sh5.c
@@ -0,0 +1,228 @@
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Support functions for the SH5 PCI hardware.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/irq.h>
+#include <asm/cpu/irq.h>
+#include <asm/pci.h>
+#include <asm/io.h>
+#include "pci-sh5.h"
+
+unsigned long pcicr_virt;
+unsigned long PCI_IO_AREA;
+
+/* Rounds a number UP to the nearest power of two. Used for
+ * sizing the PCI window.
+ */
+static u32 __init r2p2(u32 num)
+{
+ int i = 31;
+ u32 tmp = num;
+
+ if (num == 0)
+ return 0;
+
+ do {
+ if (tmp & (1 << 31))
+ break;
+ i--;
+ tmp <<= 1;
+ } while (i >= 0);
+
+ tmp = 1 << i;
+ /* If the original number isn't a power of 2, round it up */
+ if (tmp != num)
+ tmp <<= 1;
+
+ return tmp;
+}
+
+static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+ unsigned pci_int, pci_air, pci_cir, pci_aint;
+
+ pci_int = SH5PCI_READ(INT);
+ pci_cir = SH5PCI_READ(CIR);
+ pci_air = SH5PCI_READ(AIR);
+
+ if (pci_int) {
+ printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
+ printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
+ printk("PCI AIR -> 0x%x\n", pci_air);
+ printk("PCI CIR -> 0x%x\n", pci_cir);
+ SH5PCI_WRITE(INT, ~0);
+ }
+
+ pci_aint = SH5PCI_READ(AINT);
+ if (pci_aint) {
+ printk("PCI ARB INTERRUPT!\n");
+ printk("PCI AINT -> 0x%x\n", pci_aint);
+ printk("PCI AIR -> 0x%x\n", pci_air);
+ printk("PCI CIR -> 0x%x\n", pci_cir);
+ SH5PCI_WRITE(AINT, ~0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
+{
+ printk("SERR IRQ\n");
+
+ return IRQ_NONE;
+}
+
+int __init sh5pci_init(unsigned long memStart, unsigned long memSize)
+{
+ u32 lsr0;
+ u32 uval;
+
+ if (request_irq(IRQ_ERR, pcish5_err_irq,
+ IRQF_DISABLED, "PCI Error",NULL) < 0) {
+ printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
+ return -EINVAL;
+ }
+
+ if (request_irq(IRQ_SERR, pcish5_serr_irq,
+ IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+ printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
+ return -EINVAL;
+ }
+
+ pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
+ if (!pcicr_virt) {
+ panic("Unable to remap PCICR\n");
+ }
+
+ PCI_IO_AREA = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
+ if (!PCI_IO_AREA) {
+ panic("Unable to remap PCIIO\n");
+ }
+
+ /* Clear snoop registers */
+ SH5PCI_WRITE(CSCR0, 0);
+ SH5PCI_WRITE(CSCR1, 0);
+
+ /* Switch off interrupts */
+ SH5PCI_WRITE(INTM, 0);
+ SH5PCI_WRITE(AINTM, 0);
+ SH5PCI_WRITE(PINTM, 0);
+
+ /* Set bus active, take it out of reset */
+ uval = SH5PCI_READ(CR);
+
+ /* Set command Register */
+ SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE |
+ CR_PFCS | CR_BMAM);
+
+ uval=SH5PCI_READ(CR);
+
+ /* Allow it to be a master */
+ /* NB - WE DISABLE I/O ACCESS to stop overlap */
+ /* set WAIT bit to enable stepping, an attempt to improve stability */
+ SH5PCI_WRITE_SHORT(CSR_CMD,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
+ PCI_COMMAND_WAIT);
+
+ /*
+ ** Set translation mapping memory in order to convert the address
+ ** used for the main bus, to the PCI internal address.
+ */
+ SH5PCI_WRITE(MBR,0x40000000);
+
+ /* Always set the max size 512M */
+ SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
+
+ /*
+ ** I/O addresses are mapped at internal PCI specific address
+ ** as is described into the configuration bridge table.
+ ** These are changed to 0, to allow cards that have legacy
+ ** io such as vga to function correctly. We set the SH5 IOBAR to
+ ** 256K, which is a bit big as we can only have 64K of address space
+ */
+
+ SH5PCI_WRITE(IOBR,0x0);
+
+ /* Set up a 256K window. Totally pointless waste of address space */
+ SH5PCI_WRITE(IOBMR,0);
+
+ /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec.
+ * Ideally, we would want to map the I/O region somewhere, but it
+ * is so big this is not that easy!
+ */
+ SH5PCI_WRITE(CSR_IBAR0,~0);
+ /* Set memory size value */
+ memSize = memory_end - memory_start;
+
+ /* Now we set up the mbars so the PCI bus can see the memory of
+ * the machine */
+ if (memSize < (1024 * 1024)) {
+ printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n",
+ memSize);
+ return -EINVAL;
+ }
+
+ /* Set LSR 0 */
+ lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 :
+ ((r2p2(memSize) - 0x100000) | 0x1);
+ SH5PCI_WRITE(LSR0, lsr0);
+
+ /* Set MBAR 0 */
+ SH5PCI_WRITE(CSR_MBAR0, memory_start);
+ SH5PCI_WRITE(LAR0, memory_start);
+
+ SH5PCI_WRITE(CSR_MBAR1,0);
+ SH5PCI_WRITE(LAR1,0);
+ SH5PCI_WRITE(LSR1,0);
+
+ /* Enable the PCI interrupts on the device */
+ SH5PCI_WRITE(INTM, ~0);
+ SH5PCI_WRITE(AINTM, ~0);
+ SH5PCI_WRITE(PINTM, ~0);
+
+ return 0;
+}
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev = bus->self;
+ int i;
+
+ if (dev) {
+ for (i= 0; i < 3; i++) {
+ bus->resource[i] =
+ &dev->resource[PCI_BRIDGE_RESOURCES+i];
+ bus->resource[i]->name = bus->name;
+ }
+ bus->resource[0]->flags |= IORESOURCE_IO;
+ bus->resource[1]->flags |= IORESOURCE_MEM;
+
+ /* For now, propagate host limits to the bus;
+ * we'll adjust them later. */
+ bus->resource[0]->end = 64*1024 - 1 ;
+ bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
+ bus->resource[0]->start = PCIBIOS_MIN_IO;
+ bus->resource[1]->start = PCIBIOS_MIN_MEM;
+
+ /* Turn off downstream PF memory address range by default */
+ bus->resource[2]->start = 1024*1024;
+ bus->resource[2]->end = bus->resource[2]->start - 1;
+ }
+}
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-16 14:55:34 +0300