diff options
Diffstat (limited to 'arch/sh/boards')
44 files changed, 802 insertions, 323 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index d893411022d5..fb5805745ace 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -44,6 +44,8 @@ config SH_7721_SOLUTION_ENGINE config SH_7722_SOLUTION_ENGINE bool "SolutionEngine7722" select SOLUTION_ENGINE + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN depends on CPU_SUBTYPE_SH7722 help Select 7722 SolutionEngine if configuring for a Hitachi SH772 @@ -54,6 +56,8 @@ config SH_7724_SOLUTION_ENGINE select SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select SND_SOC_AK4642 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select 7724 SolutionEngine if configuring for a Hitachi SH7724 evaluation board. @@ -79,6 +83,8 @@ config SH_7780_SOLUTION_ENGINE config SH_7343_SOLUTION_ENGINE bool "SolutionEngine7343" select SOLUTION_ENGINE + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN depends on CPU_SUBTYPE_SH7343 help Select 7343 SolutionEngine if configuring for a Hitachi @@ -133,7 +139,9 @@ config SH_RTS7751R2D config SH_RSK bool "Renesas Starter Kit" - depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 + depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ + CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select this option if configuring for any of the RSK+ MCU evaluation platforms. @@ -153,6 +161,7 @@ config SH_SDK7786 select NO_IOPORT if !PCI select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_SRAM_POOL + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select SDK7786 if configuring for a Renesas Technology Europe SH7786-65nm board. @@ -167,6 +176,7 @@ config SH_SH7757LCR bool "SH7757LCR" depends on CPU_SUBTYPE_SH7757 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR config SH_SH7785LCR bool "SH7785LCR" @@ -200,6 +210,7 @@ config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. @@ -208,6 +219,7 @@ config SH_AP325RXA bool "AP-325RXA" depends on CPU_SUBTYPE_SH7723 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" @@ -216,6 +228,7 @@ config SH_KFR2R09 bool "KFR2R09" depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help "Kit For R2R for 2009" support. @@ -223,6 +236,8 @@ config SH_ECOVEC bool "EcoVec" depends on CPU_SUBTYPE_SH7724 select ARCH_REQUIRE_GPIOLIB + select SND_SOC_DA7210 if SND_SIMPLE_CARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "R0P7724LC0011/21RL (EcoVec)" support. @@ -292,11 +307,13 @@ config SH_X3PROTO bool "SH-X3 Prototype board" depends on CPU_SUBTYPE_SHX3 select NO_IOPORT if !PCI + select IRQ_DOMAIN config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" depends on CPU_SUBTYPE_SH7720 select ARCH_REQUIRE_GPIOLIB + select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Magic Panel R2 if configuring for Magic Panel R2. @@ -308,6 +325,7 @@ config SH_CAYMAN config SH_POLARIS bool "SMSC Polaris" select CPU_HAS_IPR_IRQ + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7709 help Select if configuring for an SMSC Polaris development board @@ -315,6 +333,7 @@ config SH_POLARIS config SH_SH2007 bool "SH-2007 board" select NO_IOPORT + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7780 help SH-2007 is a single-board computer based around SH7780 chip @@ -326,6 +345,7 @@ config SH_SH2007 config SH_APSH4A3A bool "AP-SH4A-3A" select SH_ALPHA_BOARD + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7785 help Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. @@ -334,12 +354,11 @@ config SH_APSH4AD0A bool "AP-SH4AD-0A" select SH_ALPHA_BOARD select SYS_SUPPORTS_PCI + select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7786 help Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. -endmenu - source "arch/sh/boards/mach-r2d/Kconfig" source "arch/sh/boards/mach-highlander/Kconfig" source "arch/sh/boards/mach-sdk7780/Kconfig" @@ -359,3 +378,5 @@ config SH_MAGIC_PANEL_R2_VERSION endmenu endif + +endmenu diff --git a/arch/sh/boards/board-apsh4a3a.c b/arch/sh/boards/board-apsh4a3a.c index 2823619c6006..0a39c241628a 100644 --- a/arch/sh/boards/board-apsh4a3a.c +++ b/arch/sh/boards/board-apsh4a3a.c @@ -13,6 +13,8 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/irq.h> #include <linux/clk.h> @@ -66,6 +68,12 @@ static struct platform_device nor_flash_device = { .resource = nor_flash_resources, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -105,6 +113,8 @@ static struct platform_device *apsh4a3a_devices[] __initdata = { static int __init apsh4a3a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4a3a_devices, ARRAY_SIZE(apsh4a3a_devices)); } diff --git a/arch/sh/boards/board-apsh4ad0a.c b/arch/sh/boards/board-apsh4ad0a.c index b4d6292a9247..92eac3a99187 100644 --- a/arch/sh/boards/board-apsh4ad0a.c +++ b/arch/sh/boards/board-apsh4ad0a.c @@ -12,12 +12,20 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/irq.h> #include <linux/clk.h> #include <asm/machvec.h> #include <asm/sizes.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -56,6 +64,8 @@ static struct platform_device *apsh4ad0a_devices[] __initdata = { static int __init apsh4ad0a_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(apsh4ad0a_devices, ARRAY_SIZE(apsh4ad0a_devices)); } diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c index 541d8a281035..5e24c17bbdad 100644 --- a/arch/sh/boards/board-edosk7705.c +++ b/arch/sh/boards/board-edosk7705.c @@ -13,6 +13,7 @@ #include <linux/platform_device.h> #include <linux/interrupt.h> #include <linux/smc91x.h> +#include <linux/sh_intc.h> #include <asm/machvec.h> #include <asm/sizes.h> @@ -20,7 +21,7 @@ #define SMC_IO_OFFSET 0x300 #define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET) -#define ETHERNET_IRQ 0x09 +#define ETHERNET_IRQ evt2irq(0x320) static void __init sh_edosk7705_init_irq(void) { @@ -73,6 +74,5 @@ device_initcall(init_edosk7705_devices); */ static struct sh_machine_vector mv_edosk7705 __initmv = { .mv_name = "EDOSK7705", - .mv_nr_irqs = 80, .mv_init_irq = sh_edosk7705_init_irq, }; diff --git a/arch/sh/boards/board-edosk7760.c b/arch/sh/boards/board-edosk7760.c index e9656a2cc4cc..bab5b9513904 100644 --- a/arch/sh/boards/board-edosk7760.c +++ b/arch/sh/boards/board-edosk7760.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/smc91x.h> #include <linux/interrupt.h> +#include <linux/sh_intc.h> #include <linux/i2c.h> #include <linux/mtd/physmap.h> #include <asm/machvec.h> @@ -40,8 +41,6 @@ #define SMC_IO_OFFSET 0x300 #define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET) -#define ETHERNET_IRQ 5 - /* NOR flash */ static struct mtd_partition edosk7760_nor_flash_partitions[] = { { @@ -99,8 +98,8 @@ static struct resource sh7760_i2c1_res[] = { .end = SH7760_I2C1_MMIOEND, .flags = IORESOURCE_MEM, },{ - .start = SH7760_I2C1_IRQ, - .end = SH7760_I2C1_IRQ, + .start = evt2irq(0x9e0), + .end = evt2irq(0x9e0), .flags = IORESOURCE_IRQ, }, }; @@ -122,8 +121,8 @@ static struct resource sh7760_i2c0_res[] = { .end = SH7760_I2C0_MMIOEND, .flags = IORESOURCE_MEM, }, { - .start = SH7760_I2C0_IRQ, - .end = SH7760_I2C0_IRQ, + .start = evt2irq(0x9c0), + .end = evt2irq(0x9c0), .flags = IORESOURCE_IRQ, }, }; @@ -150,8 +149,8 @@ static struct resource smc91x_res[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = ETHERNET_IRQ, - .end = ETHERNET_IRQ, + .start = evt2irq(0x2a0), + .end = evt2irq(0x2a0), .flags = IORESOURCE_IRQ , } }; @@ -189,5 +188,4 @@ device_initcall(init_edosk7760_devices); */ struct sh_machine_vector mv_edosk7760 __initmv = { .mv_name = "EDOSK7760", - .mv_nr_irqs = 128, }; diff --git a/arch/sh/boards/board-espt.c b/arch/sh/boards/board-espt.c index b3ae9d38cbc0..6cba0a7068bc 100644 --- a/arch/sh/boards/board-espt.c +++ b/arch/sh/boards/board-espt.c @@ -14,6 +14,7 @@ #include <linux/mtd/physmap.h> #include <linux/io.h> #include <linux/sh_eth.h> +#include <linux/sh_intc.h> #include <asm/machvec.h> #include <asm/sizes.h> @@ -71,7 +72,7 @@ static struct resource sh_eth_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = 57, /* irq number */ + .start = evt2irq(0x920), /* irq number */ .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index b2ca1d9948fb..20500858b56c 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -14,15 +14,24 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/map.h> +#include <linux/sh_intc.h> #include <mach/magicpanelr2.h> #include <asm/heartbeat.h> #include <cpu/sh7720.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + #define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Wait until reset finished. Timeout is 100ms. */ @@ -245,8 +254,8 @@ static struct resource smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 35, - .end = 35, + .start = evt2irq(0x660), + .end = evt2irq(0x660), .flags = IORESOURCE_IRQ, }, }; @@ -347,6 +356,8 @@ static struct platform_device *mpr2_devices[] __initdata = { static int __init mpr2_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices)); } device_initcall(mpr2_devices_setup); @@ -358,17 +369,17 @@ static void __init init_mpr2_IRQ(void) { plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */ - irq_set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ - irq_set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ - irq_set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ - irq_set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ - irq_set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ - irq_set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ - - intc_set_priority(32, 13); /* IRQ0 CAN1 */ - intc_set_priority(33, 13); /* IRQ0 CAN2 */ - intc_set_priority(34, 13); /* IRQ0 CAN3 */ - intc_set_priority(35, 6); /* IRQ3 SMSC9115 */ + irq_set_irq_type(evt2irq(0x600), IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */ + irq_set_irq_type(evt2irq(0x620), IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */ + irq_set_irq_type(evt2irq(0x640), IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */ + irq_set_irq_type(evt2irq(0x660), IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */ + irq_set_irq_type(evt2irq(0x680), IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */ + irq_set_irq_type(evt2irq(0x6a0), IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */ + + intc_set_priority(evt2irq(0x600), 13); /* IRQ0 CAN1 */ + intc_set_priority(evt2irq(0x620), 13); /* IRQ0 CAN2 */ + intc_set_priority(evt2irq(0x640), 13); /* IRQ0 CAN3 */ + intc_set_priority(evt2irq(0x660), 6); /* IRQ3 SMSC9115 */ } /* diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c index 594866356c24..37a08d094727 100644 --- a/arch/sh/boards/board-polaris.c +++ b/arch/sh/boards/board-polaris.c @@ -1,5 +1,5 @@ /* - * June 2006 steve.glendinning@smsc.com + * June 2006 Steve Glendinning <steve.glendinning@shawell.net> * * Polaris-specific resource declaration * @@ -9,6 +9,8 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/io.h> #include <asm/irq.h> @@ -22,6 +24,12 @@ #define AREA5_WAIT_CTRL (0x1C00) #define WAIT_STATES_10 (0x7) +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -88,6 +96,8 @@ static int __init polaris_initialise(void) printk(KERN_INFO "Configuring Polaris external bus\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* Configure area 5 with 2 wait states */ wcr = __raw_readw(WCR2); wcr &= (~AREA5_WAIT_CTRL); @@ -141,6 +151,5 @@ static void __init init_polaris_irq(void) static struct sh_machine_vector mv_polaris __initmv = { .mv_name = "Polaris", - .mv_nr_irqs = 61, .mv_init_irq = init_polaris_irq, }; diff --git a/arch/sh/boards/board-secureedge5410.c b/arch/sh/boards/board-secureedge5410.c index 03820c3c93d4..98b36205aa7b 100644 --- a/arch/sh/boards/board-secureedge5410.c +++ b/arch/sh/boards/board-secureedge5410.c @@ -71,6 +71,5 @@ static void __init init_snapgear_IRQ(void) */ static struct sh_machine_vector mv_snapgear __initmv = { .mv_name = "SnapGear SecureEdge5410", - .mv_nr_irqs = 72, .mv_init_irq = init_snapgear_IRQ, }; diff --git a/arch/sh/boards/board-sh2007.c b/arch/sh/boards/board-sh2007.c index b90b78f6a829..1980bb7e5780 100644 --- a/arch/sh/boards/board-sh2007.c +++ b/arch/sh/boards/board-sh2007.c @@ -6,6 +6,8 @@ */ #include <linux/init.h> #include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/platform_device.h> #include <linux/ata_platform.h> @@ -13,6 +15,14 @@ #include <asm/machvec.h> #include <mach/sh2007.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x.0"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), + REGULATOR_SUPPLY("vddvario", "smsc911x.1"), + REGULATOR_SUPPLY("vdd33a", "smsc911x.1"), +}; + struct smsc911x_platform_config smc911x_info = { .flags = SMSC911X_USE_32BIT, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -98,6 +108,8 @@ static struct platform_device *sh2007_devices[] __initdata = { static int __init sh2007_io_init(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices)); return 0; } diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 24b1ee410daa..41f86702eb9f 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -12,6 +12,8 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/irq.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/io.h> @@ -19,6 +21,7 @@ #include <linux/mmc/sh_mmcif.h> #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/sh_eth.h> +#include <linux/sh_intc.h> #include <linux/usb/renesas_usbhs.h> #include <cpu/sh7757.h> #include <asm/heartbeat.h> @@ -65,8 +68,8 @@ static struct resource sh_eth0_resources[] = { .end = 0xfef001ff, .flags = IORESOURCE_MEM, }, { - .start = 84, - .end = 84, + .start = evt2irq(0xc80), + .end = evt2irq(0xc80), .flags = IORESOURCE_IRQ, }, }; @@ -94,8 +97,8 @@ static struct resource sh_eth1_resources[] = { .end = 0xfef009ff, .flags = IORESOURCE_MEM, }, { - .start = 84, - .end = 84, + .start = evt2irq(0xc80), + .end = evt2irq(0xc80), .flags = IORESOURCE_IRQ, }, }; @@ -139,8 +142,8 @@ static struct resource sh_eth_giga0_resources[] = { .end = 0xfee01fff, .flags = IORESOURCE_MEM, }, { - .start = 315, - .end = 315, + .start = evt2irq(0x2960), + .end = evt2irq(0x2960), .flags = IORESOURCE_IRQ, }, }; @@ -174,8 +177,8 @@ static struct resource sh_eth_giga1_resources[] = { .end = 0xfee01fff, .flags = IORESOURCE_MEM, }, { - .start = 316, - .end = 316, + .start = evt2irq(0x2980), + .end = evt2irq(0x2980), .flags = IORESOURCE_IRQ, }, }; @@ -198,6 +201,15 @@ static struct platform_device sh7757_eth_giga1_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0, MMCIF */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), +}; + /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { @@ -206,11 +218,11 @@ static struct resource sh_mmcif_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 211, + .start = evt2irq(0x1c60), .flags = IORESOURCE_IRQ, }, [2] = { - .start = 212, + .start = evt2irq(0x1c80), .flags = IORESOURCE_IRQ, }, }; @@ -248,7 +260,7 @@ static struct resource sdhi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 20, + .start = evt2irq(0x480), .flags = IORESOURCE_IRQ, }, }; @@ -284,8 +296,8 @@ static struct resource usb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 50, - .end = 50, + .start = evt2irq(0x840), + .end = evt2irq(0x840), .flags = IORESOURCE_IRQ, }, }; @@ -328,6 +340,9 @@ static struct spi_board_info spi_board_info[] = { static int __init sh7757lcr_devices_setup(void) { + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* RGMII (PTA) */ gpio_request(GPIO_FN_ET0_MDC, NULL); gpio_request(GPIO_FN_ET0_MDIO, NULL); diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index d0d6221d7c2e..2c4771ee84cd 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -20,6 +20,7 @@ #include <linux/i2c-pca-platform.h> #include <linux/i2c-algo-pca.h> #include <linux/usb/r8a66597.h> +#include <linux/sh_intc.h> #include <linux/irq.h> #include <linux/io.h> #include <linux/clk.h> @@ -105,8 +106,8 @@ static struct resource r8a66597_usb_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 2, - .end = 2, + .start = evt2irq(0x240), + .end = evt2irq(0x240), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -135,7 +136,7 @@ static struct resource sm501_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = 10, + .start = evt2irq(0x340), .flags = IORESOURCE_IRQ, }, }; @@ -223,8 +224,8 @@ static struct resource i2c_proto_resources[] = { .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }, [1] = { - .start = 12, - .end = 12, + .start = evt2irq(0x380), + .end = evt2irq(0x380), .flags = IORESOURCE_IRQ, }, }; @@ -236,8 +237,8 @@ static struct resource i2c_resources[] = { .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, }, [1] = { - .start = 12, - .end = 12, + .start = evt2irq(0x380), + .end = evt2irq(0x380), .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/sh/boards/board-urquell.c b/arch/sh/boards/board-urquell.c index 24e3316c5c17..b52abcc5259a 100644 --- a/arch/sh/boards/board-urquell.c +++ b/arch/sh/boards/board-urquell.c @@ -20,6 +20,7 @@ #include <linux/gpio.h> #include <linux/irq.h> #include <linux/clk.h> +#include <linux/sh_intc.h> #include <mach/urquell.h> #include <cpu/sh7786.h> #include <asm/heartbeat.h> @@ -78,7 +79,7 @@ static struct resource smc91x_eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 11, + .start = evt2irq(0x360), .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 8cf02e343333..9e963c1d1447 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -20,9 +20,12 @@ #include <linux/mtd/sh_flctl.h> #include <linux/delay.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/gpio.h> #include <linux/videodev2.h> +#include <linux/sh_intc.h> #include <media/ov772x.h> #include <media/soc_camera.h> #include <media/soc_camera_platform.h> @@ -33,6 +36,12 @@ #include <asm/suspend.h> #include <cpu/sh7723.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct smsc911x_platform_config smsc911x_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, @@ -47,8 +56,8 @@ static struct resource smsc9118_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 35, - .end = 35, + .start = evt2irq(0x660), + .end = evt2irq(0x660), .flags = IORESOURCE_IRQ, } }; @@ -166,7 +175,7 @@ static int ap320_wvga_set_brightness(int brightness) __raw_writew(0, FPGA_BKLREG); gpio_set_value(GPIO_PTS3, 1); } - + return 0; } @@ -236,7 +245,7 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 28, + .start = evt2irq(0x580), .flags = IORESOURCE_IRQ, }, }; @@ -404,7 +413,7 @@ static struct resource ceu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, + .start = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -422,6 +431,15 @@ static struct platform_device ceu_device = { }, }; +/* Fixed 3.3V regulators to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn3_resources[] = { [0] = { .name = "SDHI0", @@ -430,7 +448,7 @@ static struct resource sdhi0_cn3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; @@ -457,7 +475,7 @@ static struct resource sdhi1_cn7_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 23, + .start = evt2irq(0x4e0), .flags = IORESOURCE_IRQ, }, }; @@ -543,6 +561,10 @@ static int __init ap325rxa_devices_setup(void) &ap325rxa_sdram_leave_start, &ap325rxa_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + /* LD3 and LD4 LEDs */ gpio_request(GPIO_PTX5, NULL); /* RUN */ gpio_direction_output(GPIO_PTX5, 1); diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c index e89e8e122a26..340fd40b381d 100644 --- a/arch/sh/boards/mach-cayman/setup.c +++ b/arch/sh/boards/mach-cayman/setup.c @@ -181,7 +181,6 @@ extern void init_cayman_irq(void); static struct sh_machine_vector mv_cayman __initmv = { .mv_name = "Hitachi Cayman", - .mv_nr_irqs = 64, .mv_ioport_map = cayman_ioport_map, .mv_init_irq = init_cayman_irq, }; diff --git a/arch/sh/boards/mach-dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c index f63d323f411f..2789647abebe 100644 --- a/arch/sh/boards/mach-dreamcast/irq.c +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -8,10 +8,11 @@ * This file is part of the LinuxDC project (www.linuxdc.org) * Released under the terms of the GNU GPL v2.0 */ - #include <linux/irq.h> #include <linux/io.h> -#include <asm/irq.h> +#include <linux/irq.h> +#include <linux/export.h> +#include <linux/err.h> #include <mach/sysasic.h> /* @@ -141,26 +142,15 @@ int systemasic_irq_demux(int irq) void systemasic_irq_init(void) { - int i, nid = cpu_to_node(boot_cpu_data); - - /* Assign all virtual IRQs to the System ASIC int. handler */ - for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) { - unsigned int irq; - - irq = create_irq_nr(i, nid); - if (unlikely(irq == 0)) { - pr_err("%s: failed hooking irq %d for systemasic\n", - __func__, i); - return; - } + int irq_base, i; - if (unlikely(irq != i)) { - pr_err("%s: got irq %d but wanted %d, bailing.\n", - __func__, irq, i); - destroy_irq(irq); - return; - } + irq_base = irq_alloc_descs(HW_EVENT_IRQ_BASE, HW_EVENT_IRQ_BASE, + HW_EVENT_IRQ_MAX - HW_EVENT_IRQ_BASE, -1); + if (IS_ERR_VALUE(irq_base)) { + pr_err("%s: failed hooking irqs\n", __func__); + return; + } + for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++) irq_set_chip_and_handler(i, &systemasic_int, handle_level_irq); - } } diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index d12fe9ddf3da..64559e8af14b 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -19,6 +19,8 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/usb/renesas_usbhs.h> #include <linux/i2c.h> @@ -29,9 +31,11 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/sh_eth.h> +#include <linux/sh_intc.h> #include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <sound/sh_fsi.h> +#include <sound/simple_card.h> #include <media/sh_mobile_ceu.h> #include <media/soc_camera.h> #include <media/tw9910.h> @@ -137,7 +141,7 @@ static struct resource sh_eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 91, + .start = evt2irq(0xd60), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -178,8 +182,8 @@ static struct resource usb0_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -214,8 +218,8 @@ static struct resource usb1_common_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 66, - .end = 66, + .start = evt2irq(0xa40), + .end = evt2irq(0xa40), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -240,9 +244,17 @@ static int usbhs_get_id(struct platform_device *pdev) return gpio_get_value(GPIO_PTB3); } +static void usbhs_phy_reset(struct platform_device *pdev) +{ + /* enable vbus if HOST */ + if (!gpio_get_value(GPIO_PTB3)) + gpio_set_value(GPIO_PTB5, 1); +} + static struct renesas_usbhs_platform_info usbhs_info = { .platform_callback = { .get_id = usbhs_get_id, + .phy_reset = usbhs_phy_reset, }, .driver_param = { .buswait_bwait = 4, @@ -261,8 +273,8 @@ static struct resource usbhs_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 66, - .end = 66, + .start = evt2irq(0xa40), + .end = evt2irq(0xa40), .flags = IORESOURCE_IRQ, }, }; @@ -348,7 +360,7 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 106, + .start = evt2irq(0xf40), .flags = IORESOURCE_IRQ, }, }; @@ -375,7 +387,7 @@ static struct resource ceu0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, + .start = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -406,7 +418,7 @@ static struct resource ceu1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 63, + .start = evt2irq(0x9e0), .flags = IORESOURCE_IRQ, }, [2] = { @@ -437,7 +449,7 @@ static struct i2c_board_info i2c1_devices[] = { }, { I2C_BOARD_INFO("lis3lv02d", 0x1c), - .irq = 33, + .irq = evt2irq(0x620), } }; @@ -463,7 +475,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -479,7 +491,8 @@ static struct platform_device keysc_device = { }; /* TouchScreen */ -#define IRQ0 32 +#define IRQ0 evt2irq(0x600) + static int ts_get_pendown_state(void) { int val = 0; @@ -515,10 +528,86 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; +static struct regulator_consumer_supply cn12_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + +static struct regulator_init_data cn12_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(cn12_power_consumers), + .consumer_supplies = cn12_power_consumers, +}; + +static struct fixed_voltage_config cn12_power_info = { + .supply_name = "CN12 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB7, + .enable_high = 1, + .init_data = &cn12_power_init_data, +}; + +static struct platform_device cn12_power = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &cn12_power_info, + }, +}; + #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) /* SDHI0 */ +static struct regulator_consumer_supply sdhi0_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + +static struct regulator_init_data sdhi0_power_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdhi0_power_consumers), + .consumer_supplies = sdhi0_power_consumers, +}; + +static struct fixed_voltage_config sdhi0_power_info = { + .supply_name = "CN11 SD/MMC Vdd", + .microvolts = 3300000, + .gpio = GPIO_PTB6, + .enable_high = 1, + .init_data = &sdhi0_power_init_data, +}; + +static struct platform_device sdhi0_power = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdhi0_power_info, + }, +}; + static void sdhi0_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB6, NULL); + if (!ret) { + power_gpio = GPIO_PTB6; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB6, state); } @@ -544,7 +633,7 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; @@ -559,13 +648,27 @@ static struct platform_device sdhi0_device = { }, }; -#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) -/* SDHI1 */ -static void sdhi1_set_pwr(struct platform_device *pdev, int state) +static void cn12_set_pwr(struct platform_device *pdev, int state) { + static int power_gpio = -EINVAL; + + if (power_gpio < 0) { + int ret = gpio_request(GPIO_PTB7, NULL); + if (!ret) { + power_gpio = GPIO_PTB7; + gpio_direction_output(power_gpio, 0); + } + } + + /* + * Toggle the GPIO regardless, whether we managed to grab it above or + * the fixed regulator driver did. + */ gpio_set_value(GPIO_PTB7, state); } +#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) +/* SDHI1 */ static int sdhi1_get_cd(struct platform_device *pdev) { return !gpio_get_value(GPIO_PTW7); @@ -576,7 +679,7 @@ static struct sh_mobile_sdhi_info sdhi1_info = { .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, .tmio_caps = MMC_CAP_SDIO_IRQ | MMC_CAP_POWER_OFF_CARD | MMC_CAP_NEEDS_POLL, - .set_pwr = sdhi1_set_pwr, + .set_pwr = cn12_set_pwr, .get_cd = sdhi1_get_cd, }; @@ -588,7 +691,7 @@ static struct resource sdhi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 23, + .start = evt2irq(0x4e0), .flags = IORESOURCE_IRQ, }, }; @@ -653,7 +756,7 @@ static struct resource msiof0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 84, + .start = evt2irq(0xc80), .flags = IORESOURCE_IRQ, }, }; @@ -794,7 +897,7 @@ static struct resource fsi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 108, + .start = evt2irq(0xf80), .flags = IORESOURCE_IRQ, }, }; @@ -809,6 +912,30 @@ static struct platform_device fsi_device = { }, }; +static struct asoc_simple_dai_init_info fsi_da7210_init_info = { + .fmt = SND_SOC_DAIFMT_I2S, + .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, + .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, +}; + +static struct asoc_simple_card_info fsi_da7210_info = { + .name = "DA7210", + .card = "FSIB-DA7210", + .cpu_dai = "fsib-dai", + .codec = "da7210.0-001a", + .platform = "sh_fsi.0", + .codec_dai = "da7210-hifi", + .init = &fsi_da7210_init_info, +}; + +static struct platform_device fsi_da7210_device = { + .name = "asoc-simple-card", + .dev = { + .platform_data = &fsi_da7210_info, + }, +}; + + /* IrDA */ static struct resource irda_resources[] = { [0] = { @@ -818,7 +945,7 @@ static struct resource irda_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 20, + .start = evt2irq(0x480), .flags = IORESOURCE_IRQ, }, }; @@ -855,7 +982,7 @@ static struct resource sh_vou_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 55, + .start = evt2irq(0x8e0), .flags = IORESOURCE_IRQ, }, }; @@ -872,14 +999,9 @@ static struct platform_device vou_device = { #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) /* SH_MMCIF */ -static void mmcif_set_pwr(struct platform_device *pdev, int state) -{ - gpio_set_value(GPIO_PTB7, state); -} - static void mmcif_down_pwr(struct platform_device *pdev) { - gpio_set_value(GPIO_PTB7, 0); + cn12_set_pwr(pdev, 0); } static struct resource sh_mmcif_resources[] = { @@ -891,18 +1013,18 @@ static struct resource sh_mmcif_resources[] = { }, [1] = { /* MMC2I */ - .start = 29, + .start = evt2irq(0x5a0), .flags = IORESOURCE_IRQ, }, [2] = { /* MMC3I */ - .start = 30, + .start = evt2irq(0x5c0), .flags = IORESOURCE_IRQ, }, }; static struct sh_mmcif_plat_data sh_mmcif_plat = { - .set_pwr = mmcif_set_pwr, + .set_pwr = cn12_set_pwr, .down_pwr = mmcif_down_pwr, .sup_pclk = 0, /* SH7724: Max Pclk/2 */ .caps = MMC_CAP_4_BIT_DATA | @@ -933,7 +1055,9 @@ static struct platform_device *ecovec_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &cn12_power, #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) + &sdhi0_power, &sdhi0_device, #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) &sdhi1_device, @@ -945,6 +1069,7 @@ static struct platform_device *ecovec_devices[] __initdata = { &camera_devices[1], &camera_devices[2], &fsi_device, + &fsi_da7210_device, &irda_device, &vou_device, #if defined(CONFIG_MMC_SH_MMCIF) || defined(CONFIG_MMC_SH_MMCIF_MODULE) @@ -1230,8 +1355,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI0D2, NULL); gpio_request(GPIO_FN_SDHI0D1, NULL); gpio_request(GPIO_FN_SDHI0D0, NULL); - gpio_request(GPIO_PTB6, NULL); - gpio_direction_output(GPIO_PTB6, 0); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); @@ -1260,8 +1383,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_MMC_D0, NULL); gpio_request(GPIO_FN_MMC_CLK, NULL); gpio_request(GPIO_FN_MMC_CMD, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); cn12_enabled = true; #elif defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE) @@ -1273,8 +1394,6 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_SDHI1D2, NULL); gpio_request(GPIO_FN_SDHI1D1, NULL); gpio_request(GPIO_FN_SDHI1D0, NULL); - gpio_request(GPIO_PTB7, NULL); - gpio_direction_output(GPIO_PTB7, 0); /* Card-detect, used on CN12 with SDHI1 */ gpio_request(GPIO_PTW7, NULL); diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c index 8c9add5f4cfa..05797b33f68e 100644 --- a/arch/sh/boards/mach-hp6xx/setup.c +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/irq.h> +#include <linux/sh_intc.h> #include <sound/sh_dac_audio.h> #include <asm/hd64461.h> #include <asm/io.h> @@ -35,7 +36,7 @@ static struct resource cf_ide_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = 77, + .start = evt2irq(0xba0), .flags = IORESOURCE_IRQ, }, }; @@ -168,8 +169,6 @@ device_initcall(hp6xx_devices_setup); static struct sh_machine_vector mv_hp6xx __initmv = { .mv_name = "hp6xx", .mv_setup = hp6xx_setup, - /* IRQ's : CPU(64) + CCHIP(16) + FREE_TO_USE(6) */ - .mv_nr_irqs = HD64461_IRQBASE + HD64461_IRQ_NUM + 6, /* Enable IRQ0 -> IRQ3 in IRQ_MODE */ .mv_init_irq = hp6xx_init_irq, }; diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index d04a55d3b877..f2a4304fbe23 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -21,8 +21,11 @@ #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/usb/r8a66597.h> #include <linux/videodev2.h> +#include <linux/sh_intc.h> #include <media/rj54n1cb0c.h> #include <media/soc_camera.h> #include <media/sh_mobile_ceu.h> @@ -110,7 +113,7 @@ static struct resource kfr2r09_sh_keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -175,7 +178,7 @@ static struct resource kfr2r09_sh_lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 106, + .start = evt2irq(0xf40), .flags = IORESOURCE_IRQ, }, }; @@ -200,8 +203,8 @@ static struct resource kfr2r09_usb0_gadget_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -230,8 +233,8 @@ static struct resource kfr2r09_ceu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, - .end = 52, + .start = evt2irq(0x880), + .end = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -340,6 +343,13 @@ static struct platform_device kfr2r09_camera = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource kfr2r09_sh_sdhi0_resources[] = { [0] = { .name = "SDHI0", @@ -348,7 +358,7 @@ static struct resource kfr2r09_sh_sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; @@ -522,6 +532,9 @@ static int __init kfr2r09_devices_setup(void) &kfr2r09_sdram_leave_start, &kfr2r09_sdram_leave_end); + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* enable SCIF1 serial port for YC401 console support */ gpio_request(GPIO_FN_SCIF1_RXD, NULL); gpio_request(GPIO_FN_SCIF1_TXD, NULL); diff --git a/arch/sh/boards/mach-lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c index 79b4e0d77b71..6660622aa457 100644 --- a/arch/sh/boards/mach-lboxre2/setup.c +++ b/arch/sh/boards/mach-lboxre2/setup.c @@ -79,6 +79,5 @@ device_initcall(lboxre2_devices_setup); */ static struct sh_machine_vector mv_lboxre2 __initmv = { .mv_name = "L-BOX RE2", - .mv_nr_irqs = 72, .mv_init_irq = init_lboxre2_IRQ, }; diff --git a/arch/sh/boards/mach-microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c index d8a747291e03..6c66ee4d842b 100644 --- a/arch/sh/boards/mach-microdev/setup.c +++ b/arch/sh/boards/mach-microdev/setup.c @@ -194,7 +194,6 @@ device_initcall(microdev_devices_setup); */ static struct sh_machine_vector mv_sh4202_microdev __initmv = { .mv_name = "SH4-202 MicroDev", - .mv_nr_irqs = 72, .mv_ioport_map = microdev_ioport_map, .mv_init_irq = init_microdev_irq, }; diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index ff6f69c6906e..8b73194ed2ce 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -17,11 +17,14 @@ #include <linux/mtd/physmap.h> #include <linux/mtd/nand.h> #include <linux/i2c.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/gpio.h> #include <linux/videodev2.h> +#include <linux/sh_intc.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <media/ov772x.h> @@ -54,7 +57,7 @@ static struct resource smc91x_eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 32, /* IRQ0 */ + .start = evt2irq(0x600), /* IRQ0 */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -88,7 +91,7 @@ static struct resource sh_keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -187,7 +190,6 @@ static struct platform_nand_data migor_nand_flash_data = { .partitions = migor_nand_flash_partitions, .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions), .chip_delay = 20, - .part_probe_types = (const char *[]) { "cmdlinepart", NULL }, }, .ctrl = { .dev_ready = migor_nand_flash_ready, @@ -285,7 +287,7 @@ static struct resource migor_lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 28, + .start = evt2irq(0x580), .flags = IORESOURCE_IRQ, }, }; @@ -368,7 +370,7 @@ static struct resource migor_ceu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, + .start = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -386,6 +388,13 @@ static struct platform_device migor_ceu_device = { }, }; +/* Fixed 3.3V regulator to be used by SDHI0 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), +}; + static struct resource sdhi_cn9_resources[] = { [0] = { .name = "SDHI", @@ -394,7 +403,7 @@ static struct resource sdhi_cn9_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; @@ -420,7 +429,7 @@ static struct i2c_board_info migor_i2c_devices[] = { }, { I2C_BOARD_INFO("migor_ts", 0x51), - .irq = 38, /* IRQ6 */ + .irq = evt2irq(0x6c0), /* IRQ6 */ }, { I2C_BOARD_INFO("wm8978", 0x1a), @@ -498,6 +507,10 @@ static int __init migor_devices_setup(void) &migor_sdram_enter_end, &migor_sdram_leave_start, &migor_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Let D11 LED show STATUS0 */ gpio_request(GPIO_FN_STATUS0, NULL); diff --git a/arch/sh/boards/mach-rsk/Kconfig b/arch/sh/boards/mach-rsk/Kconfig index aeff3b042205..458a11ffd022 100644 --- a/arch/sh/boards/mach-rsk/Kconfig +++ b/arch/sh/boards/mach-rsk/Kconfig @@ -13,6 +13,16 @@ config SH_RSK7203 select ARCH_REQUIRE_GPIOLIB depends on CPU_SUBTYPE_SH7203 +config SH_RSK7264 + bool "RSK2+SH7264" + select ARCH_REQUIRE_GPIOLIB + depends on CPU_SUBTYPE_SH7264 + +config SH_RSK7269 + bool "RSK2+SH7269" + select ARCH_REQUIRE_GPIOLIB + depends on CPU_SUBTYPE_SH7269 + endchoice endif diff --git a/arch/sh/boards/mach-rsk/Makefile b/arch/sh/boards/mach-rsk/Makefile index 498da75ce38b..6a4e1b538a62 100644 --- a/arch/sh/boards/mach-rsk/Makefile +++ b/arch/sh/boards/mach-rsk/Makefile @@ -1,2 +1,4 @@ obj-y := setup.o obj-$(CONFIG_SH_RSK7203) += devices-rsk7203.o +obj-$(CONFIG_SH_RSK7264) += devices-rsk7264.o +obj-$(CONFIG_SH_RSK7269) += devices-rsk7269.o diff --git a/arch/sh/boards/mach-rsk/devices-rsk7264.c b/arch/sh/boards/mach-rsk/devices-rsk7264.c new file mode 100644 index 000000000000..7251e37a842f --- /dev/null +++ b/arch/sh/boards/mach-rsk/devices-rsk7264.c @@ -0,0 +1,58 @@ +/* + * RSK+SH7264 Support. + * + * Copyright (C) 2012 Renesas Electronics Europe + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/smsc911x.h> +#include <asm/machvec.h> +#include <asm/io.h> + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = 0x28000000, + .end = 0x280000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct platform_device *rsk7264_devices[] __initdata = { + &smsc911x_device, +}; + +static int __init rsk7264_devices_setup(void) +{ + return platform_add_devices(rsk7264_devices, + ARRAY_SIZE(rsk7264_devices)); +} +device_initcall(rsk7264_devices_setup); diff --git a/arch/sh/boards/mach-rsk/devices-rsk7269.c b/arch/sh/boards/mach-rsk/devices-rsk7269.c new file mode 100644 index 000000000000..4a544591d6f0 --- /dev/null +++ b/arch/sh/boards/mach-rsk/devices-rsk7269.c @@ -0,0 +1,60 @@ +/* + * RSK+SH7269 Support + * + * Copyright (C) 2012 Renesas Electronics Europe Ltd + * Copyright (C) 2012 Phil Edworthy + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/smsc911x.h> +#include <linux/gpio.h> +#include <asm/machvec.h> +#include <asm/io.h> + +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_SWAP_FIFO, +}; + +static struct resource smsc911x_resources[] = { + [0] = { + .start = 0x24000000, + .end = 0x240000ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 85, + .end = 85, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, +}; + +static struct platform_device *rsk7269_devices[] __initdata = { + &smsc911x_device, +}; + +static int __init rsk7269_devices_setup(void) +{ + return platform_add_devices(rsk7269_devices, + ARRAY_SIZE(rsk7269_devices)); +} +device_initcall(rsk7269_devices_setup); diff --git a/arch/sh/boards/mach-rsk/setup.c b/arch/sh/boards/mach-rsk/setup.c index 895f030070d3..2685ea03b064 100644 --- a/arch/sh/boards/mach-rsk/setup.c +++ b/arch/sh/boards/mach-rsk/setup.c @@ -16,9 +16,17 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/map.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <asm/machvec.h> #include <asm/io.h> +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition rsk_partitions[] = { @@ -67,6 +75,8 @@ static struct platform_device *rsk_devices[] __initdata = { static int __init rsk_devices_setup(void) { + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + return platform_add_devices(rsk_devices, ARRAY_SIZE(rsk_devices)); } diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c index 4da38db4b5fe..2241659c3299 100644 --- a/arch/sh/boards/mach-sdk7780/setup.c +++ b/arch/sh/boards/mach-sdk7780/setup.c @@ -94,7 +94,6 @@ static void __init sdk7780_setup(char **cmdline_p) static struct sh_machine_vector mv_se7780 __initmv = { .mv_name = "Renesas SDK7780-R3" , .mv_setup = sdk7780_setup, - .mv_nr_irqs = 111, .mv_init_irq = init_sdk7780_IRQ, }; diff --git a/arch/sh/boards/mach-sdk7786/setup.c b/arch/sh/boards/mach-sdk7786/setup.c index 27a2314f50ac..c29268bfd34a 100644 --- a/arch/sh/boards/mach-sdk7786/setup.c +++ b/arch/sh/boards/mach-sdk7786/setup.c @@ -11,6 +11,8 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smsc911x.h> #include <linux/i2c.h> #include <linux/irq.h> @@ -38,6 +40,12 @@ static struct platform_device heartbeat_device = { .resource = &heartbeat_resource, }; +/* Dummy supplies, where voltage doesn't matter */ +static struct regulator_consumer_supply dummy_supplies[] = { + REGULATOR_SUPPLY("vddvario", "smsc911x"), + REGULATOR_SUPPLY("vdd33a", "smsc911x"), +}; + static struct resource smsc911x_resources[] = { [0] = { .name = "smsc911x-memory", @@ -236,6 +244,8 @@ static void __init sdk7786_setup(char **cmdline_p) { pr_info("Renesas Technology Europe SDK7786 support:\n"); + regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + sdk7786_fpga_init(); sdk7786_nmi_init(); diff --git a/arch/sh/boards/mach-se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index 8ab8330e3fd1..68883ec95682 100644 --- a/arch/sh/boards/mach-se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -90,7 +90,6 @@ static int se7206_mode_pins(void) static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", - .mv_nr_irqs = 256, .mv_init_irq = init_se7206_IRQ, .mv_mode_pins = se7206_mode_pins, }; diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index fd45ffc48340..7646bf0486c2 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -1,86 +1,129 @@ /* - * linux/arch/sh/boards/se/7343/irq.c + * Hitachi UL SolutionEngine 7343 FPGA IRQ Support. * * Copyright (C) 2008 Yoshihiro Shimoda + * Copyright (C) 2012 Paul Mundt * - * Based on linux/arch/sh/boards/se/7722/irq.c + * Based on linux/arch/sh/boards/se/7343/irq.c * Copyright (C) 2007 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define DRV_NAME "SE7343-FPGA" +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#define irq_reg_readl ioread16 +#define irq_reg_writel iowrite16 + #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/irqdomain.h> #include <linux/io.h> +#include <asm/sizes.h> #include <mach-se/mach/se7343.h> -unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, }; +#define PA_CPLD_BASE_ADDR 0x11400000 +#define PA_CPLD_ST_REG 0x08 /* CPLD Interrupt status register */ +#define PA_CPLD_IMSK_REG 0x0a /* CPLD Interrupt mask register */ -static void disable_se7343_irq(struct irq_data *data) -{ - unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); - __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); -} +static void __iomem *se7343_irq_regs; +struct irq_domain *se7343_irq_domain; -static void enable_se7343_irq(struct irq_data *data) +static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); - __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); -} + struct irq_data *data = irq_get_irq_data(irq); + struct irq_chip *chip = irq_data_get_irq_chip(data); + unsigned long mask; + int bit; -static struct irq_chip se7343_irq_chip __read_mostly = { - .name = "SE7343-FPGA", - .irq_mask = disable_se7343_irq, - .irq_unmask = enable_se7343_irq, -}; + chip->irq_mask_ack(data); -static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) + mask = ioread16(se7343_irq_regs + PA_CPLD_ST_REG); + + for_each_set_bit(bit, &mask, SE7343_FPGA_IRQ_NR) + generic_handle_irq(irq_linear_revmap(se7343_irq_domain, bit)); + + chip->irq_unmask(data); +} + +static void __init se7343_domain_init(void) { - unsigned short intv = __raw_readw(PA_CPLD_ST); - unsigned int ext_irq = 0; + int i; - intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; + se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR, + &irq_domain_simple_ops, NULL); + if (unlikely(!se7343_irq_domain)) { + printk("Failed to get IRQ domain\n"); + return; + } - for (; intv; intv >>= 1, ext_irq++) { - if (!(intv & 1)) - continue; + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) { + int irq = irq_create_mapping(se7343_irq_domain, i); - generic_handle_irq(se7343_fpga_irq[ext_irq]); + if (unlikely(irq == 0)) { + printk("Failed to allocate IRQ %d\n", i); + return; + } } } -/* - * Initialize IRQ setting - */ -void __init init_7343se_IRQ(void) +static void __init se7343_gc_init(void) { - int i, irq; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + unsigned int irq_base; - __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */ - __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ + irq_base = irq_linear_revmap(se7343_irq_domain, 0); - for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) { - irq = create_irq(); - if (irq < 0) - return; - se7343_fpga_irq[i] = irq; + gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7343_irq_regs, + handle_level_irq); + if (unlikely(!gc)) + return; - irq_set_chip_and_handler_name(se7343_fpga_irq[i], - &se7343_irq_chip, - handle_level_irq, - "level"); + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; - irq_set_chip_data(se7343_fpga_irq[i], (void *)i); - } + ct->regs.mask = PA_CPLD_IMSK_REG; + + irq_setup_generic_chip(gc, IRQ_MSK(SE7343_FPGA_IRQ_NR), + IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); irq_set_chained_handler(IRQ0_IRQ, se7343_irq_demux); irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + irq_set_chained_handler(IRQ1_IRQ, se7343_irq_demux); irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + irq_set_chained_handler(IRQ4_IRQ, se7343_irq_demux); irq_set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); + irq_set_chained_handler(IRQ5_IRQ, se7343_irq_demux); irq_set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); } + +/* + * Initialize IRQ setting + */ +void __init init_7343se_IRQ(void) +{ + se7343_irq_regs = ioremap(PA_CPLD_BASE_ADDR, SZ_16); + if (unlikely(!se7343_irq_regs)) { + pr_err("Failed to remap CPLD\n"); + return; + } + + /* + * All FPGA IRQs disabled by default + */ + iowrite16(0, se7343_irq_regs + PA_CPLD_IMSK_REG); + + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + se7343_domain_init(); + se7343_gc_init(); +} diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index d2370af56d77..8ce4f2a202a8 100644 --- a/arch/sh/boards/mach-se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -5,6 +5,7 @@ #include <linux/serial_reg.h> #include <linux/usb/isp116x.h> #include <linux/delay.h> +#include <linux/irqdomain.h> #include <asm/machvec.h> #include <mach-se/mach/se7343.h> #include <asm/heartbeat.h> @@ -145,11 +146,12 @@ static struct platform_device *sh7343se_platform_devices[] __initdata = { static int __init sh7343se_devices_setup(void) { /* Wire-up dynamic vectors */ - serial_platform_data[0].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTA]; - serial_platform_data[1].irq = se7343_fpga_irq[SE7343_FPGA_IRQ_UARTB]; - + serial_platform_data[0].irq = irq_find_mapping(se7343_irq_domain, + SE7343_FPGA_IRQ_UARTA); + serial_platform_data[1].irq = irq_find_mapping(se7343_irq_domain, + SE7343_FPGA_IRQ_UARTB); usb_resources[2].start = usb_resources[2].end = - se7343_fpga_irq[SE7343_FPGA_IRQ_USB]; + irq_find_mapping(se7343_irq_domain, SE7343_FPGA_IRQ_USB); return platform_add_devices(sh7343se_platform_devices, ARRAY_SIZE(sh7343se_platform_devices)); diff --git a/arch/sh/boards/mach-se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c index 31330c65c0ce..9759d6ba7ffb 100644 --- a/arch/sh/boards/mach-se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -184,16 +184,5 @@ device_initcall(se_devices_setup); static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", .mv_setup = smsc_setup, -#if defined(CONFIG_CPU_SH4) - .mv_nr_irqs = 48, -#elif defined(CONFIG_CPU_SUBTYPE_SH7708) - .mv_nr_irqs = 32, -#elif defined(CONFIG_CPU_SUBTYPE_SH7709) - .mv_nr_irqs = 61, -#elif defined(CONFIG_CPU_SUBTYPE_SH7705) - .mv_nr_irqs = 86, -#elif defined(CONFIG_CPU_SUBTYPE_SH7710) || defined(CONFIG_CPU_SUBTYPE_SH7712) - .mv_nr_irqs = 104, -#endif .mv_init_irq = init_se_IRQ, }; diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c index 7416ad7ee53a..a0b3dba34ebf 100644 --- a/arch/sh/boards/mach-se/7721/setup.c +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -92,6 +92,5 @@ static void __init se7721_setup(char **cmdline_p) struct sh_machine_vector mv_se7721 __initmv = { .mv_name = "Solution Engine 7721", .mv_setup = se7721_setup, - .mv_nr_irqs = 109, .mv_init_irq = init_se7721_IRQ, }; diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index aac92f21ebd2..f5e2af1bf040 100644 --- a/arch/sh/boards/mach-se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -1,79 +1,96 @@ /* - * linux/arch/sh/boards/se/7722/irq.c + * Hitachi UL SolutionEngine 7722 FPGA IRQ Support. * * Copyright (C) 2007 Nobuhiro Iwamatsu - * - * Hitachi UL SolutionEngine 7722 Support. + * Copyright (C) 2012 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ +#define DRV_NAME "SE7722-FPGA" +#define pr_fmt(fmt) DRV_NAME ": " fmt + +#define irq_reg_readl ioread16 +#define irq_reg_writel iowrite16 + #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/irqdomain.h> +#include <linux/io.h> +#include <linux/err.h> +#include <asm/sizes.h> #include <mach-se/mach/se7722.h> -unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, }; +#define IRQ01_BASE_ADDR 0x11800000 +#define IRQ01_MODE_REG 0 +#define IRQ01_STS_REG 4 +#define IRQ01_MASK_REG 8 -static void disable_se7722_irq(struct irq_data *data) -{ - unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); - __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); -} +static void __iomem *se7722_irq_regs; +struct irq_domain *se7722_irq_domain; -static void enable_se7722_irq(struct irq_data *data) +static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned int bit = (unsigned int)irq_data_get_irq_chip_data(data); - __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); -} + struct irq_data *data = irq_get_irq_data(irq); + struct irq_chip *chip = irq_data_get_irq_chip(data); + unsigned long mask; + int bit; -static struct irq_chip se7722_irq_chip __read_mostly = { - .name = "SE7722-FPGA", - .irq_mask = disable_se7722_irq, - .irq_unmask = enable_se7722_irq, -}; + chip->irq_mask_ack(data); -static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) + mask = ioread16(se7722_irq_regs + IRQ01_STS_REG); + + for_each_set_bit(bit, &mask, SE7722_FPGA_IRQ_NR) + generic_handle_irq(irq_linear_revmap(se7722_irq_domain, bit)); + + chip->irq_unmask(data); +} + +static void __init se7722_domain_init(void) { - unsigned short intv = __raw_readw(IRQ01_STS); - unsigned int ext_irq = 0; + int i; - intv &= (1 << SE7722_FPGA_IRQ_NR) - 1; + se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR, + &irq_domain_simple_ops, NULL); + if (unlikely(!se7722_irq_domain)) { + printk("Failed to get IRQ domain\n"); + return; + } - for (; intv; intv >>= 1, ext_irq++) { - if (!(intv & 1)) - continue; + for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) { + int irq = irq_create_mapping(se7722_irq_domain, i); - generic_handle_irq(se7722_fpga_irq[ext_irq]); + if (unlikely(irq == 0)) { + printk("Failed to allocate IRQ %d\n", i); + return; + } } } -/* - * Initialize IRQ setting - */ -void __init init_se7722_IRQ(void) +static void __init se7722_gc_init(void) { - int i, irq; + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + unsigned int irq_base; - __raw_writew(0, IRQ01_MASK); /* disable all irqs */ - __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ + irq_base = irq_linear_revmap(se7722_irq_domain, 0); - for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) { - irq = create_irq(); - if (irq < 0) - return; - se7722_fpga_irq[i] = irq; + gc = irq_alloc_generic_chip(DRV_NAME, 1, irq_base, se7722_irq_regs, + handle_level_irq); + if (unlikely(!gc)) + return; - irq_set_chip_and_handler_name(se7722_fpga_irq[i], - &se7722_irq_chip, - handle_level_irq, - "level"); + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; - irq_set_chip_data(se7722_fpga_irq[i], (void *)i); - } + ct->regs.mask = IRQ01_MASK_REG; + + irq_setup_generic_chip(gc, IRQ_MSK(SE7722_FPGA_IRQ_NR), + IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); irq_set_chained_handler(IRQ0_IRQ, se7722_irq_demux); irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); @@ -81,3 +98,25 @@ void __init init_se7722_IRQ(void) irq_set_chained_handler(IRQ1_IRQ, se7722_irq_demux); irq_set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); } + +/* + * Initialize FPGA IRQs + */ +void __init init_se7722_IRQ(void) +{ + se7722_irq_regs = ioremap(IRQ01_BASE_ADDR, SZ_16); + if (unlikely(!se7722_irq_regs)) { + printk("Failed to remap IRQ01 regs\n"); + return; + } + + /* + * All FPGA IRQs disabled by default + */ + iowrite16(0, se7722_irq_regs + IRQ01_MASK_REG); + + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + se7722_domain_init(); + se7722_gc_init(); +} diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index e1963fecd761..e04e2bc46984 100644 --- a/arch/sh/boards/mach-se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -2,6 +2,7 @@ * linux/arch/sh/boards/se/7722/setup.c * * Copyright (C) 2007 Nobuhiro Iwamatsu + * Copyright (C) 2012 Paul Mundt * * Hitachi UL SolutionEngine 7722 Support. * @@ -15,7 +16,9 @@ #include <linux/ata_platform.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/irqdomain.h> #include <linux/smc91x.h> +#include <linux/sh_intc.h> #include <mach-se/mach/se7722.h> #include <mach-se/mach/mrshpc.h> #include <asm/machvec.h> @@ -114,7 +117,7 @@ static struct resource sh_keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -142,10 +145,10 @@ static int __init se7722_devices_setup(void) /* Wire-up dynamic vectors */ cf_ide_resources[2].start = cf_ide_resources[2].end = - se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0]; + irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_MRSHPC0); smc91x_eth_resources[1].start = smc91x_eth_resources[1].end = - se7722_fpga_irq[SE7722_FPGA_IRQ_SMC]; + irq_find_mapping(se7722_irq_domain, SE7722_FPGA_IRQ_SMC); return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices)); } diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c index c6342ce7768d..5d1d3ec9a6cd 100644 --- a/arch/sh/boards/mach-se/7724/irq.c +++ b/arch/sh/boards/mach-se/7724/irq.c @@ -17,8 +17,10 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <asm/irq.h> -#include <asm/io.h> +#include <linux/export.h> +#include <linux/topology.h> +#include <linux/io.h> +#include <linux/err.h> #include <mach-se/mach/se7724.h> struct fpga_irq { @@ -111,7 +113,7 @@ static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) */ void __init init_se7724_IRQ(void) { - int i, nid = cpu_to_node(boot_cpu_data); + int irq_base, i; __raw_writew(0xffff, IRQ0_MR); /* mask all */ __raw_writew(0xffff, IRQ1_MR); /* mask all */ @@ -121,28 +123,16 @@ void __init init_se7724_IRQ(void) __raw_writew(0x0000, IRQ2_SR); /* clear irq */ __raw_writew(0x002a, IRQ_MODE); /* set irq type */ - for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) { - int irq, wanted; - - wanted = SE7724_FPGA_IRQ_BASE + i; - - irq = create_irq_nr(wanted, nid); - if (unlikely(irq == 0)) { - pr_err("%s: failed hooking irq %d for FPGA\n", - __func__, wanted); - return; - } - - if (unlikely(irq != wanted)) { - pr_err("%s: got irq %d but wanted %d, bailing.\n", - __func__, irq, wanted); - destroy_irq(irq); - return; - } + irq_base = irq_alloc_descs(SE7724_FPGA_IRQ_BASE, SE7724_FPGA_IRQ_BASE, + SE7724_FPGA_IRQ_NR, numa_node_id()); + if (IS_ERR_VALUE(irq_base)) { + pr_err("%s: failed hooking irqs for FPGA\n", __func__); + return; + } - irq_set_chip_and_handler_name(irq, &se7724_irq_chip, + for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) + irq_set_chip_and_handler_name(irq_base + i, &se7724_irq_chip, handle_level_irq, "level"); - } irq_set_chained_handler(IRQ0_IRQ, se7724_irq_demux); irq_set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index c540b16547c3..35f6efa3ac0e 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -18,16 +18,20 @@ #include <linux/mmc/sh_mobile_sdhi.h> #include <linux/mtd/physmap.h> #include <linux/delay.h> +#include <linux/regulator/fixed.h> +#include <linux/regulator/machine.h> #include <linux/smc91x.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> #include <linux/sh_eth.h> +#include <linux/sh_intc.h> #include <linux/videodev2.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <sound/sh_fsi.h> +#include <sound/simple_card.h> #include <asm/io.h> #include <asm/heartbeat.h> #include <asm/clock.h> @@ -197,7 +201,7 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 106, + .start = evt2irq(0xf40), .flags = IORESOURCE_IRQ, }, }; @@ -224,7 +228,7 @@ static struct resource ceu0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 52, + .start = evt2irq(0x880), .flags = IORESOURCE_IRQ, }, [2] = { @@ -255,7 +259,7 @@ static struct resource ceu1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 63, + .start = evt2irq(0x9e0), .flags = IORESOURCE_IRQ, }, [2] = { @@ -289,7 +293,7 @@ static struct resource fsi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 108, + .start = evt2irq(0xf80), .flags = IORESOURCE_IRQ, }, }; @@ -304,17 +308,25 @@ static struct platform_device fsi_device = { }, }; -static struct fsi_ak4642_info fsi_ak4642_info = { +static struct asoc_simple_dai_init_info fsi2_ak4642_init_info = { + .fmt = SND_SOC_DAIFMT_LEFT_J, + .codec_daifmt = SND_SOC_DAIFMT_CBM_CFM, + .cpu_daifmt = SND_SOC_DAIFMT_CBS_CFS, + .sysclk = 11289600, +}; + +static struct asoc_simple_card_info fsi_ak4642_info = { .name = "AK4642", .card = "FSIA-AK4642", .cpu_dai = "fsia-dai", .codec = "ak4642-codec.0-0012", .platform = "sh_fsi.0", - .id = FSI_PORT_A, + .codec_dai = "ak4642-hifi", + .init = &fsi2_ak4642_init_info, }; static struct platform_device fsi_ak4642_device = { - .name = "fsi-ak4642-audio", + .name = "asoc-simple-card", .dev = { .platform_data = &fsi_ak4642_info, }, @@ -343,7 +355,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), .flags = IORESOURCE_IRQ, }, }; @@ -366,7 +378,7 @@ static struct resource sh_eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 91, + .start = evt2irq(0xd60), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -397,8 +409,8 @@ static struct resource sh7724_usb0_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -426,8 +438,8 @@ static struct resource sh7724_usb1_gadget_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 66, - .end = 66, + .start = evt2irq(0xa40), + .end = evt2irq(0xa40), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; @@ -444,6 +456,15 @@ static struct platform_device sh7724_usb1_gadget_device = { .resource = sh7724_usb1_gadget_resources, }; +/* Fixed 3.3V regulator to be used by SDHI0, SDHI1 */ +static struct regulator_consumer_supply fixed3v3_power_consumers[] = +{ + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), + REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), + REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), +}; + static struct resource sdhi0_cn7_resources[] = { [0] = { .name = "SDHI0", @@ -452,7 +473,7 @@ static struct resource sdhi0_cn7_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 100, + .start = evt2irq(0xe80), .flags = IORESOURCE_IRQ, }, }; @@ -481,7 +502,7 @@ static struct resource sdhi1_cn8_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 23, + .start = evt2irq(0x4e0), .flags = IORESOURCE_IRQ, }, }; @@ -511,7 +532,7 @@ static struct resource irda_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 20, + .start = evt2irq(0x480), .flags = IORESOURCE_IRQ, }, }; @@ -549,7 +570,7 @@ static struct resource sh_vou_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 55, + .start = evt2irq(0x8e0), .flags = IORESOURCE_IRQ, }, }; @@ -595,6 +616,7 @@ static struct i2c_board_info i2c0_devices[] = { #define EEPROM_DATA 0xBA20600C #define EEPROM_STAT 0xBA206010 #define EEPROM_STRT 0xBA206014 + static int __init sh_eth_is_eeprom_ready(void) { int t = 10000; @@ -651,7 +673,6 @@ extern char ms7724se_sdram_enter_end; extern char ms7724se_sdram_leave_start; extern char ms7724se_sdram_leave_end; - static int __init arch_setup(void) { /* enable I2C device */ @@ -674,6 +695,10 @@ static int __init devices_setup(void) &ms7724se_sdram_enter_end, &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); + + regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers, + ARRAY_SIZE(fixed3v3_power_consumers), 3300000); + /* Reset Release */ fpga_out = __raw_readw(FPGA_OUT); /* bit4: NTSC_PDN, bit5: NTSC_RESET */ @@ -928,5 +953,4 @@ device_initcall(devices_setup); static struct sh_machine_vector mv_ms7724se __initmv = { .mv_name = "ms7724se", .mv_init_irq = init_se7724_IRQ, - .mv_nr_irqs = SE7724_FPGA_IRQ_BASE + SE7724_FPGA_IRQ_NR, }; diff --git a/arch/sh/boards/mach-se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c index 4ed60c5e221f..820f4e7ba0d2 100644 --- a/arch/sh/boards/mach-se/7751/setup.c +++ b/arch/sh/boards/mach-se/7751/setup.c @@ -55,6 +55,5 @@ device_initcall(se7751_devices_setup); */ static struct sh_machine_vector mv_7751se __initmv = { .mv_name = "7751 SolutionEngine", - .mv_nr_irqs = 72, .mv_init_irq = init_7751se_IRQ, }; diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index 6f7c207138e1..ae5a1d84fdf8 100644 --- a/arch/sh/boards/mach-se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -110,6 +110,5 @@ static void __init se7780_setup(char **cmdline_p) static struct sh_machine_vector mv_se7780 __initmv = { .mv_name = "Solution Engine 7780" , .mv_setup = se7780_setup , - .mv_nr_irqs = 111 , .mv_init_irq = init_se7780_IRQ, }; diff --git a/arch/sh/boards/mach-se/board-se7619.c b/arch/sh/boards/mach-se/board-se7619.c index 82b6d4a5dc02..958bcd7aacc5 100644 --- a/arch/sh/boards/mach-se/board-se7619.c +++ b/arch/sh/boards/mach-se/board-se7619.c @@ -22,6 +22,5 @@ static int se7619_mode_pins(void) static struct sh_machine_vector mv_se __initmv = { .mv_name = "SolutionEngine", - .mv_nr_irqs = 108, .mv_mode_pins = se7619_mode_pins, }; diff --git a/arch/sh/boards/mach-sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c index d4f79b2a6514..f582dab59343 100644 --- a/arch/sh/boards/mach-sh03/setup.c +++ b/arch/sh/boards/mach-sh03/setup.c @@ -101,6 +101,5 @@ device_initcall(sh03_devices_setup); static struct sh_machine_vector mv_sh03 __initmv = { .mv_name = "Interface (CTP/PCI-SH03)", .mv_setup = sh03_setup, - .mv_nr_irqs = 48, .mv_init_irq = init_sh03_IRQ, }; diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c index dd036f1661db..b7c75298dfb5 100644 --- a/arch/sh/boards/mach-sh7763rdp/setup.c +++ b/arch/sh/boards/mach-sh7763rdp/setup.c @@ -18,6 +18,7 @@ #include <linux/fb.h> #include <linux/io.h> #include <linux/sh_eth.h> +#include <linux/sh_intc.h> #include <mach/sh7763rdp.h> #include <asm/sh7760fb.h> @@ -67,7 +68,7 @@ static struct platform_device sh7763rdp_nor_flash_device = { * SH-Ether * * SH Ether of SH7763 has multi IRQ handling. - * (57,58,59 -> 57) + * (0x920,0x940,0x960 -> 0x920) */ static struct resource sh_eth_resources[] = { { @@ -79,7 +80,7 @@ static struct resource sh_eth_resources[] = { .end = 0xFEE01FFF, .flags = IORESOURCE_MEM, }, { - .start = 57, /* irq number */ + .start = evt2irq(0x920), /* irq number */ .flags = IORESOURCE_IRQ, }, }; @@ -213,6 +214,5 @@ static void __init sh7763rdp_setup(char **cmdline_p) static struct sh_machine_vector mv_sh7763rdp __initmv = { .mv_name = "sh7763drp", .mv_setup = sh7763rdp_setup, - .mv_nr_irqs = 112, .mv_init_irq = init_sh7763rdp_IRQ, }; diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c index f33b2b57019c..3ea65e9b56e8 100644 --- a/arch/sh/boards/mach-x3proto/gpio.c +++ b/arch/sh/boards/mach-x3proto/gpio.c @@ -3,7 +3,7 @@ * * Renesas SH-X3 Prototype Baseboard GPIO Support. * - * Copyright (C) 2010 Paul Mundt + * Copyright (C) 2010 - 2012 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -17,6 +17,7 @@ #include <linux/irq.h> #include <linux/kernel.h> #include <linux/spinlock.h> +#include <linux/irqdomain.h> #include <linux/io.h> #include <mach/ilsel.h> #include <mach/hardware.h> @@ -26,7 +27,7 @@ #define KEYDETR 0xb81c0004 static DEFINE_SPINLOCK(x3proto_gpio_lock); -static unsigned int x3proto_gpio_irq_map[NR_BASEBOARD_GPIOS] = { 0, }; +static struct irq_domain *x3proto_irq_domain; static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) { @@ -49,7 +50,14 @@ static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio) static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio) { - return x3proto_gpio_irq_map[gpio]; + int virq; + + if (gpio < chip->ngpio) + virq = irq_create_mapping(x3proto_irq_domain, gpio); + else + virq = -ENXIO; + + return virq; } static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) @@ -62,9 +70,8 @@ static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) chip->irq_mask_ack(data); mask = __raw_readw(KEYDETR); - for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS) - generic_handle_irq(x3proto_gpio_to_irq(NULL, pin)); + generic_handle_irq(irq_linear_revmap(x3proto_irq_domain, pin)); chip->irq_unmask(data); } @@ -78,10 +85,23 @@ struct gpio_chip x3proto_gpio_chip = { .ngpio = NR_BASEBOARD_GPIOS, }; +static int x3proto_gpio_irq_map(struct irq_domain *domain, unsigned int virq, + irq_hw_number_t hwirq) +{ + irq_set_chip_and_handler_name(virq, &dummy_irq_chip, handle_simple_irq, + "gpio"); + + return 0; +} + +static struct irq_domain_ops x3proto_gpio_irq_ops = { + .map = x3proto_gpio_irq_map, + .xlate = irq_domain_xlate_twocell, +}; + int __init x3proto_gpio_setup(void) { - int ilsel; - int ret, i; + int ilsel, ret; ilsel = ilsel_enable(ILSEL_KEY); if (unlikely(ilsel < 0)) @@ -91,21 +111,10 @@ int __init x3proto_gpio_setup(void) if (unlikely(ret)) goto err_gpio; - for (i = 0; i < NR_BASEBOARD_GPIOS; i++) { - unsigned long flags; - int irq = create_irq(); - - if (unlikely(irq < 0)) { - ret = -EINVAL; - goto err_irq; - } - - spin_lock_irqsave(&x3proto_gpio_lock, flags); - x3proto_gpio_irq_map[i] = irq; - irq_set_chip_and_handler_name(irq, &dummy_irq_chip, - handle_simple_irq, "gpio"); - spin_unlock_irqrestore(&x3proto_gpio_lock, flags); - } + x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS, + &x3proto_gpio_irq_ops, NULL); + if (unlikely(!x3proto_irq_domain)) + goto err_irq; pr_info("registering '%s' support, handling GPIOs %u -> %u, " "bound to IRQ %u\n", @@ -119,10 +128,6 @@ int __init x3proto_gpio_setup(void) return 0; err_irq: - for (; i >= 0; --i) - if (x3proto_gpio_irq_map[i]) - destroy_irq(x3proto_gpio_irq_map[i]); - ret = gpiochip_remove(&x3proto_gpio_chip); if (unlikely(ret)) pr_err("Failed deregistering GPIO\n"); |