1 files changed, 134 insertions, 0 deletions
diff --git a/arch/sh/boards/overdrive/fpga.c b/arch/sh/boards/overdrive/fpga.c
new file mode 100644
index 000000000000..3a1ec9403441
--- /dev/null
+++ b/arch/sh/boards/overdrive/fpga.c
@@ -0,0 +1,134 @@
+/* 
+ * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.                            
+ *
+ * This file handles programming up the Altera Flex10K that interfaces to
+ * the Galileo, and does the PS/2 keyboard and mouse
+ *
+ */
+
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/smp.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+
+
+#include <asm/overdriver/gt64111.h>
+#include <asm/overdrive/overdrive.h>
+#include <asm/overdrive/fpga.h>
+
+#define FPGA_NotConfigHigh()  (*FPGA_ControlReg) = (*FPGA_ControlReg) | ENABLE_FPGA_BIT
+#define FPGA_NotConfigLow()   (*FPGA_ControlReg) = (*FPGA_ControlReg) & RESET_FPGA_MASK
+
+/* I need to find out what (if any) the real delay factor here is */
+/* The delay is definately not critical */
+#define long_delay() {int i;for(i=0;i<10000;i++);}
+#define short_delay() {int i;for(i=0;i<100;i++);}
+
+static void __init program_overdrive_fpga(const unsigned char *fpgacode,
+					  int size)
+{
+	int timeout = 0;
+	int i, j;
+	unsigned char b;
+	static volatile unsigned char *FPGA_ControlReg =
+	    (volatile unsigned char *) (OVERDRIVE_CTRL);
+	static volatile unsigned char *FPGA_ProgramReg =
+	    (volatile unsigned char *) (FPGA_DCLK_ADDRESS);
+
+	printk("FPGA:  Commencing FPGA Programming\n");
+
+	/* The PCI reset but MUST be low when programming the FPGA !!! */
+	b = (*FPGA_ControlReg) & RESET_PCI_MASK;
+
+	(*FPGA_ControlReg) = b;
+
+	/* Prepare FPGA to program */
+
+	FPGA_NotConfigHigh();
+	long_delay();
+
+	FPGA_NotConfigLow();
+	short_delay();
+
+	while ((*FPGA_ProgramReg & FPGA_NOT_STATUS) != 0) {
+		printk("FPGA:  Waiting for NotStatus to go Low ... \n");
+	}
+
+	FPGA_NotConfigHigh();
+
+	/* Wait for FPGA "ready to be programmed" signal */
+	printk("FPGA:  Waiting for NotStatus to go high (FPGA ready)... \n");
+
+	for (timeout = 0;
+	     (((*FPGA_ProgramReg & FPGA_NOT_STATUS) == 0)
+	      && (timeout < FPGA_TIMEOUT)); timeout++);
+
+	/* Check if timeout condition occured - i.e. an error */
+
+	if (timeout == FPGA_TIMEOUT) {
+		printk
+		    ("FPGA:  Failed to program - Timeout waiting for notSTATUS to go high\n");
+		return;
+	}
+
+	printk("FPGA:  Copying data to FPGA ... %d bytes\n", size);
+
+	/* Copy array to FPGA - bit at a time */
+
+	for (i = 0; i < size; i++) {
+		volatile unsigned w = 0;
+
+		for (j = 0; j < 8; j++) {
+			*FPGA_ProgramReg = (fpgacode[i] >> j) & 0x01;
+			short_delay();
+		}
+		if ((i & 0x3ff) == 0) {
+			printk(".");
+		}
+	}
+
+	/* Waiting for CONFDONE to go high - means the program is complete  */
+
+	for (timeout = 0;
+	     (((*FPGA_ProgramReg & FPGA_CONFDONE) == 0)
+	      && (timeout < FPGA_TIMEOUT)); timeout++) {
+
+		*FPGA_ProgramReg = 0x0;
+		long_delay();
+	}
+
+	if (timeout == FPGA_TIMEOUT) {
+		printk
+		    ("FPGA:  Failed to program - Timeout waiting for CONFDONE to go high\n");
+		return;
+	} else {		/* Clock another 10 times - gets the device into a working state      */
+		for (i = 0; i < 10; i++) {
+			*FPGA_ProgramReg = 0x0;
+			short_delay();
+		}
+	}
+
+	printk("FPGA:  Programming complete\n");
+}
+
+
+static const unsigned char __init fpgacode[] = {
+#include "./overdrive.ttf"	/* Code from maxplus2 compiler */
+	, 0, 0
+};
+
+
+int __init init_overdrive_fpga(void)
+{
+	program_overdrive_fpga(fpgacode, sizeof(fpgacode));
+
+	return 0;
+}