diff options
Diffstat (limited to 'arch/ppc64')
| -rw-r--r-- | arch/ppc64/boot/addRamDisk.c | 207 | ||||
| -rw-r--r-- | arch/ppc64/kernel/Makefile | 10 | ||||
| -rw-r--r-- | arch/ppc64/kernel/cpu_setup_power4.S | 233 | ||||
| -rw-r--r-- | arch/ppc64/kernel/eeh.c | 943 | ||||
| -rw-r--r-- | arch/ppc64/kernel/firmware.c | 47 | ||||
| -rw-r--r-- | arch/ppc64/kernel/idle.c | 15 | ||||
| -rw-r--r-- | arch/ppc64/kernel/ioctl32.c | 49 | ||||
| -rw-r--r-- | arch/ppc64/kernel/pacaData.c | 143 | ||||
| -rw-r--r-- | arch/ppc64/kernel/pci_dn.c | 21 | ||||
| -rw-r--r-- | arch/ppc64/kernel/rtas_pci.c | 47 |
10 files changed, 159 insertions, 1556 deletions
diff --git a/arch/ppc64/boot/addRamDisk.c b/arch/ppc64/boot/addRamDisk.c index 7f2c09473394..c02a99952be7 100644 --- a/arch/ppc64/boot/addRamDisk.c +++ b/arch/ppc64/boot/addRamDisk.c @@ -5,11 +5,59 @@ #include <sys/types.h> #include <sys/stat.h> #include <string.h> +#include <elf.h> #define ElfHeaderSize (64 * 1024) #define ElfPages (ElfHeaderSize / 4096) #define KERNELBASE (0xc000000000000000) +#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) +struct addr_range { + unsigned long long addr; + unsigned long memsize; + unsigned long offset; +}; + +static int check_elf64(void *p, int size, struct addr_range *r) +{ + Elf64_Ehdr *elf64 = p; + Elf64_Phdr *elf64ph; + + if (elf64->e_ident[EI_MAG0] != ELFMAG0 || + elf64->e_ident[EI_MAG1] != ELFMAG1 || + elf64->e_ident[EI_MAG2] != ELFMAG2 || + elf64->e_ident[EI_MAG3] != ELFMAG3 || + elf64->e_ident[EI_CLASS] != ELFCLASS64 || + elf64->e_ident[EI_DATA] != ELFDATA2MSB || + elf64->e_type != ET_EXEC || elf64->e_machine != EM_PPC64) + return 0; + + if ((elf64->e_phoff + sizeof(Elf64_Phdr)) > size) + return 0; + + elf64ph = (Elf64_Phdr *) ((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + + r->memsize = (unsigned long)elf64ph->p_memsz; + r->offset = (unsigned long)elf64ph->p_offset; + r->addr = (unsigned long long)elf64ph->p_vaddr; + +#ifdef DEBUG + printf("PPC64 ELF file, ph:\n"); + printf("p_type 0x%08x\n", elf64ph->p_type); + printf("p_flags 0x%08x\n", elf64ph->p_flags); + printf("p_offset 0x%016llx\n", elf64ph->p_offset); + printf("p_vaddr 0x%016llx\n", elf64ph->p_vaddr); + printf("p_paddr 0x%016llx\n", elf64ph->p_paddr); + printf("p_filesz 0x%016llx\n", elf64ph->p_filesz); + printf("p_memsz 0x%016llx\n", elf64ph->p_memsz); + printf("p_align 0x%016llx\n", elf64ph->p_align); + printf("... skipping 0x%08lx bytes of ELF header\n", + (unsigned long)elf64ph->p_offset); +#endif + + return 64; +} void get4k(FILE *file, char *buf ) { unsigned j; @@ -34,97 +82,92 @@ void death(const char *msg, FILE *fdesc, const char *fname) int main(int argc, char **argv) { char inbuf[4096]; - FILE *ramDisk = NULL; - FILE *sysmap = NULL; - FILE *inputVmlinux = NULL; - FILE *outputVmlinux = NULL; - - unsigned i = 0; - unsigned long ramFileLen = 0; - unsigned long ramLen = 0; - unsigned long roundR = 0; - - unsigned long sysmapFileLen = 0; - unsigned long sysmapLen = 0; - unsigned long sysmapPages = 0; - char* ptr_end = NULL; - unsigned long offset_end = 0; - - unsigned long kernelLen = 0; - unsigned long actualKernelLen = 0; - unsigned long round = 0; - unsigned long roundedKernelLen = 0; - unsigned long ramStartOffs = 0; - unsigned long ramPages = 0; - unsigned long roundedKernelPages = 0; - unsigned long hvReleaseData = 0; + struct addr_range vmlinux; + FILE *ramDisk; + FILE *inputVmlinux; + FILE *outputVmlinux; + + char *rd_name, *lx_name, *out_name; + + size_t i; + unsigned long ramFileLen; + unsigned long ramLen; + unsigned long roundR; + unsigned long offset_end; + + unsigned long kernelLen; + unsigned long actualKernelLen; + unsigned long round; + unsigned long roundedKernelLen; + unsigned long ramStartOffs; + unsigned long ramPages; + unsigned long roundedKernelPages; + unsigned long hvReleaseData; u_int32_t eyeCatcher = 0xc8a5d9c4; - unsigned long naca = 0; - unsigned long xRamDisk = 0; - unsigned long xRamDiskSize = 0; - long padPages = 0; + unsigned long naca; + unsigned long xRamDisk; + unsigned long xRamDiskSize; + long padPages; if (argc < 2) { fprintf(stderr, "Name of RAM disk file missing.\n"); exit(1); } + rd_name = argv[1]; if (argc < 3) { - fprintf(stderr, "Name of System Map input file is missing.\n"); - exit(1); - } - - if (argc < 4) { fprintf(stderr, "Name of vmlinux file missing.\n"); exit(1); } + lx_name = argv[2]; - if (argc < 5) { + if (argc < 4) { fprintf(stderr, "Name of vmlinux output file missing.\n"); exit(1); } + out_name = argv[3]; - ramDisk = fopen(argv[1], "r"); + ramDisk = fopen(rd_name, "r"); if ( ! ramDisk ) { - fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", argv[1]); + fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", rd_name); exit(1); } - sysmap = fopen(argv[2], "r"); - if ( ! sysmap ) { - fprintf(stderr, "System Map file \"%s\" failed to open.\n", argv[2]); - exit(1); - } - - inputVmlinux = fopen(argv[3], "r"); + inputVmlinux = fopen(lx_name, "r"); if ( ! inputVmlinux ) { - fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", argv[3]); + fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", lx_name); exit(1); } - outputVmlinux = fopen(argv[4], "w+"); + outputVmlinux = fopen(out_name, "w+"); if ( ! outputVmlinux ) { - fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", argv[4]); + fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", out_name); exit(1); } - - - + + i = fread(inbuf, 1, sizeof(inbuf), inputVmlinux); + if (i != sizeof(inbuf)) { + fprintf(stderr, "can not read vmlinux file %s: %u\n", lx_name, i); + exit(1); + } + + i = check_elf64(inbuf, sizeof(inbuf), &vmlinux); + if (i == 0) { + fprintf(stderr, "You must have a linux kernel specified as argv[2]\n"); + exit(1); + } + /* Input Vmlinux file */ fseek(inputVmlinux, 0, SEEK_END); kernelLen = ftell(inputVmlinux); fseek(inputVmlinux, 0, SEEK_SET); - printf("kernel file size = %d\n", kernelLen); - if ( kernelLen == 0 ) { - fprintf(stderr, "You must have a linux kernel specified as argv[3]\n"); - exit(1); - } + printf("kernel file size = %lu\n", kernelLen); actualKernelLen = kernelLen - ElfHeaderSize; - printf("actual kernel length (minus ELF header) = %d\n", actualKernelLen); + printf("actual kernel length (minus ELF header) = %lu\n", actualKernelLen); round = actualKernelLen % 4096; roundedKernelLen = actualKernelLen; @@ -134,39 +177,7 @@ int main(int argc, char **argv) roundedKernelPages = roundedKernelLen / 4096; printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages); - - - /* Input System Map file */ - /* (needs to be processed simply to determine if we need to add pad pages due to the static variables not being included in the vmlinux) */ - fseek(sysmap, 0, SEEK_END); - sysmapFileLen = ftell(sysmap); - fseek(sysmap, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[2], sysmapFileLen, sysmapFileLen); - - sysmapLen = sysmapFileLen; - - roundR = 4096 - (sysmapLen % 4096); - if (roundR) { - printf("Rounding System Map file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR); - sysmapLen += roundR; - } - printf("Rounded System Map size is %ld/0x%lx \n", sysmapLen, sysmapLen); - - /* Process the Sysmap file to determine where _end is */ - sysmapPages = sysmapLen / 4096; - /* read the whole file line by line, expect that it doesn't fail */ - while ( fgets(inbuf, 4096, sysmap) ) ; - /* search for _end in the last page of the system map */ - ptr_end = strstr(inbuf, " _end"); - if (!ptr_end) { - fprintf(stderr, "Unable to find _end in the sysmap file \n"); - fprintf(stderr, "inbuf: \n"); - fprintf(stderr, "%s \n", inbuf); - exit(1); - } - printf("Found _end in the last page of the sysmap - backing up 10 characters it looks like %s", ptr_end-10); - /* convert address of _end in system map to hex offset. */ - offset_end = (unsigned int)strtol(ptr_end-10, NULL, 16); + offset_end = _ALIGN_UP(vmlinux.memsize, 4096); /* calc how many pages we need to insert between the vmlinux and the start of the ram disk */ padPages = offset_end/4096 - roundedKernelPages; @@ -194,7 +205,7 @@ int main(int argc, char **argv) fseek(ramDisk, 0, SEEK_END); ramFileLen = ftell(ramDisk); fseek(ramDisk, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[1], ramFileLen, ramFileLen); + printf("%s file size = %ld/0x%lx \n", rd_name, ramFileLen, ramFileLen); ramLen = ramFileLen; @@ -248,19 +259,19 @@ int main(int argc, char **argv) /* fseek to the hvReleaseData pointer */ fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET); if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData pointer\n", outputVmlinux, argv[4]); + death("Could not read hvReleaseData pointer\n", outputVmlinux, out_name); } hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */ - printf("hvReleaseData is at %08x\n", hvReleaseData); + printf("hvReleaseData is at %08lx\n", hvReleaseData); /* fseek to the hvReleaseData */ fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET); if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData\n", outputVmlinux, argv[4]); + death("Could not read hvReleaseData\n", outputVmlinux, out_name); } /* Check hvReleaseData sanity */ if (memcmp(inbuf, &eyeCatcher, 4) != 0) { - death("hvReleaseData is invalid\n", outputVmlinux, argv[4]); + death("hvReleaseData is invalid\n", outputVmlinux, out_name); } /* Get the naca pointer */ naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE; @@ -269,13 +280,13 @@ int main(int argc, char **argv) /* fseek to the naca */ fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not read naca\n", outputVmlinux, argv[4]); + death("Could not read naca\n", outputVmlinux, out_name); } xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c])); xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14])); /* Make sure a RAM disk isn't already present */ if ((xRamDisk != 0) || (xRamDiskSize != 0)) { - death("RAM disk is already attached to this kernel\n", outputVmlinux, argv[4]); + death("RAM disk is already attached to this kernel\n", outputVmlinux, out_name); } /* Fill in the values */ *((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs); @@ -285,15 +296,15 @@ int main(int argc, char **argv) fflush(outputVmlinux); fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not write naca\n", outputVmlinux, argv[4]); + death("Could not write naca\n", outputVmlinux, out_name); } - printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08x\n", + printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08lx\n", ramPages, ramStartOffs); /* Done */ fclose(outputVmlinux); /* Set permission to executable */ - chmod(argv[4], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); + chmod(out_name, S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); return 0; } diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 13e479846249..1f71f23cc26d 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -12,11 +12,10 @@ obj-y := misc.o prom.o endif obj-y += idle.o dma.o \ - align.o pacaData.o \ - udbg.o ioctl32.o \ + align.o \ + udbg.o \ rtc.o \ - cpu_setup_power4.o \ - iommu.o sysfs.o vdso.o firmware.o + iommu.o sysfs.o vdso.o obj-y += vdso32/ vdso64/ pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o @@ -31,7 +30,6 @@ endif obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o obj-$(CONFIG_KEXEC) += machine_kexec.o -obj-$(CONFIG_EEH) += eeh.o obj-$(CONFIG_PROC_FS) += proc_ppc64.o obj-$(CONFIG_MODULES) += module.o ifneq ($(CONFIG_PPC_MERGE),y) @@ -52,8 +50,6 @@ obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o obj-$(CONFIG_KPROBES) += kprobes.o -CFLAGS_ioctl32.o += -Ifs/ - ifneq ($(CONFIG_PPC_MERGE),y) ifeq ($(CONFIG_PPC_ISERIES),y) arch/ppc64/kernel/head.o: arch/powerpc/kernel/lparmap.s diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/ppc64/kernel/cpu_setup_power4.S deleted file mode 100644 index 1fb673c511ff..000000000000 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file contains low level CPU setup functions. - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/cache.h> - -_GLOBAL(__970_cpu_preinit) - /* - * Do nothing if not running in HV mode - */ - mfmsr r0 - rldicl. r0,r0,4,63 - beqlr - - /* - * Deal only with PPC970 and PPC970FX. - */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr -1: - - /* Make sure HID4:rm_ci is off before MMU is turned off, that large - * pages are enabled with HID4:61 and clear HID5:DCBZ_size and - * HID5:DCBZ32_ill - */ - li r0,0 - mfspr r3,SPRN_HID4 - rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ - rldimi r3,r0,2,61 /* clear bit 61 (lg_pg_en) */ - sync - mtspr SPRN_HID4,r3 - isync - sync - mfspr r3,SPRN_HID5 - rldimi r3,r0,6,56 /* clear bits 56 & 57 (DCBZ*) */ - sync - mtspr SPRN_HID5,r3 - isync - sync - - /* Setup some basic HID1 features */ - mfspr r0,SPRN_HID1 - li r3,0x1200 /* enable i-fetch cacheability */ - sldi r3,r3,44 /* and prefetch */ - or r0,r0,r3 - mtspr SPRN_HID1,r0 - mtspr SPRN_HID1,r0 - isync - - /* Clear HIOR */ - li r0,0 - sync - mtspr SPRN_HIOR,0 /* Clear interrupt prefix */ - isync - blr - -_GLOBAL(__setup_cpu_power4) - blr - -_GLOBAL(__setup_cpu_be) - /* Set large page sizes LP=0: 16MB, LP=1: 64KB */ - addi r3, 0, 0 - ori r3, r3, HID6_LB - sldi r3, r3, 32 - nor r3, r3, r3 - mfspr r4, SPRN_HID6 - and r4, r4, r3 - addi r3, 0, 0x02000 - sldi r3, r3, 32 - or r4, r4, r3 - mtspr SPRN_HID6, r4 - blr - -_GLOBAL(__setup_cpu_ppc970) - mfspr r0,SPRN_HID0 - li r11,5 /* clear DOZE and SLEEP */ - rldimi r0,r11,52,8 /* set NAP and DPM */ - mtspr SPRN_HID0,r0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - sync - isync - blr - -/* Definitions for the table use to save CPU states */ -#define CS_HID0 0 -#define CS_HID1 8 -#define CS_HID4 16 -#define CS_HID5 24 -#define CS_SIZE 32 - - .data - .balign L1_CACHE_BYTES,0 -cpu_state_storage: - .space CS_SIZE - .balign L1_CACHE_BYTES,0 - .text - -/* Called in normal context to backup CPU 0 state. This - * does not include cache settings. This function is also - * called for machine sleep. This does not include the MMU - * setup, BATs, etc... but rather the "special" registers - * like HID0, HID1, HID4, etc... - */ -_GLOBAL(__save_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - LOADADDR(r5,cpu_state_storage) - - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bne 2f - -1: /* Save HID0,1,4 and 5 */ - mfspr r3,SPRN_HID0 - std r3,CS_HID0(r5) - mfspr r3,SPRN_HID1 - std r3,CS_HID1(r5) - mfspr r3,SPRN_HID4 - std r3,CS_HID4(r5) - mfspr r3,SPRN_HID5 - std r3,CS_HID5(r5) - -2: - mtcr r7 - blr - -/* Called with no MMU context (typically MSR:IR/DR off) to - * restore CPU state as backed up by the previous - * function. This does not include cache setting - */ -_GLOBAL(__restore_cpu_setup) - /* Get storage ptr (FIXME when using anton reloc as we - * are running with translation disabled here - */ - LOADADDR(r5,cpu_state_storage) - - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr - -1: /* Before accessing memory, we make sure rm_ci is clear */ - li r0,0 - mfspr r3,SPRN_HID4 - rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ - sync - mtspr SPRN_HID4,r3 - isync - sync - - /* Clear interrupt prefix */ - li r0,0 - sync - mtspr SPRN_HIOR,0 - isync - - /* Restore HID0 */ - ld r3,CS_HID0(r5) - sync - isync - mtspr SPRN_HID0,r3 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - sync - isync - - /* Restore HID1 */ - ld r3,CS_HID1(r5) - sync - isync - mtspr SPRN_HID1,r3 - mtspr SPRN_HID1,r3 - sync - isync - - /* Restore HID4 */ - ld r3,CS_HID4(r5) - sync - isync - mtspr SPRN_HID4,r3 - sync - isync - - /* Restore HID5 */ - ld r3,CS_HID5(r5) - sync - isync - mtspr SPRN_HID5,r3 - sync - isync - blr - diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c deleted file mode 100644 index 035d1b14a207..000000000000 --- a/arch/ppc64/kernel/eeh.c +++ /dev/null @@ -1,943 +0,0 @@ -/* - * eeh.c - * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/bootmem.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/mm.h> -#include <linux/notifier.h> -#include <linux/pci.h> -#include <linux/proc_fs.h> -#include <linux/rbtree.h> -#include <linux/seq_file.h> -#include <linux/spinlock.h> -#include <asm/eeh.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/rtas.h> -#include <asm/atomic.h> -#include <asm/systemcfg.h> -#include <asm/ppc-pci.h> - -#undef DEBUG - -/** Overview: - * EEH, or "Extended Error Handling" is a PCI bridge technology for - * dealing with PCI bus errors that can't be dealt with within the - * usual PCI framework, except by check-stopping the CPU. Systems - * that are designed for high-availability/reliability cannot afford - * to crash due to a "mere" PCI error, thus the need for EEH. - * An EEH-capable bridge operates by converting a detected error - * into a "slot freeze", taking the PCI adapter off-line, making - * the slot behave, from the OS'es point of view, as if the slot - * were "empty": all reads return 0xff's and all writes are silently - * ignored. EEH slot isolation events can be triggered by parity - * errors on the address or data busses (e.g. during posted writes), - * which in turn might be caused by dust, vibration, humidity, - * radioactivity or plain-old failed hardware. - * - * Note, however, that one of the leading causes of EEH slot - * freeze events are buggy device drivers, buggy device microcode, - * or buggy device hardware. This is because any attempt by the - * device to bus-master data to a memory address that is not - * assigned to the device will trigger a slot freeze. (The idea - * is to prevent devices-gone-wild from corrupting system memory). - * Buggy hardware/drivers will have a miserable time co-existing - * with EEH. - * - * Ideally, a PCI device driver, when suspecting that an isolation - * event has occured (e.g. by reading 0xff's), will then ask EEH - * whether this is the case, and then take appropriate steps to - * reset the PCI slot, the PCI device, and then resume operations. - * However, until that day, the checking is done here, with the - * eeh_check_failure() routine embedded in the MMIO macros. If - * the slot is found to be isolated, an "EEH Event" is synthesized - * and sent out for processing. - */ - -/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ -#define BUID_HI(buid) ((buid) >> 32) -#define BUID_LO(buid) ((buid) & 0xffffffff) - -/* EEH event workqueue setup. */ -static DEFINE_SPINLOCK(eeh_eventlist_lock); -LIST_HEAD(eeh_eventlist); -static void eeh_event_handler(void *); -DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL); - -static struct notifier_block *eeh_notifier_chain; - -/* - * If a device driver keeps reading an MMIO register in an interrupt - * handler after a slot isolation event has occurred, we assume it - * is broken and panic. This sets the threshold for how many read - * attempts we allow before panicking. - */ -#define EEH_MAX_FAILS 1000 -static atomic_t eeh_fail_count; - -/* RTAS tokens */ -static int ibm_set_eeh_option; -static int ibm_set_slot_reset; -static int ibm_read_slot_reset_state; -static int ibm_read_slot_reset_state2; -static int ibm_slot_error_detail; - -static int eeh_subsystem_enabled; - -/* Buffer for reporting slot-error-detail rtas calls */ -static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; -static DEFINE_SPINLOCK(slot_errbuf_lock); -static int eeh_error_buf_size; - -/* System monitoring statistics */ -static DEFINE_PER_CPU(unsigned long, total_mmio_ffs); -static DEFINE_PER_CPU(unsigned long, false_positives); -static DEFINE_PER_CPU(unsigned long, ignored_failures); -static DEFINE_PER_CPU(unsigned long, slot_resets); - -/** - * The pci address cache subsystem. This subsystem places - * PCI device address resources into a red-black tree, sorted - * according to the address range, so that given only an i/o - * address, the corresponding PCI device can be **quickly** - * found. It is safe to perform an address lookup in an interrupt - * context; this ability is an important feature. - * - * Currently, the only customer of this code is the EEH subsystem; - * thus, this code has been somewhat tailored to suit EEH better. - * In particular, the cache does *not* hold the addresses of devices - * for which EEH is not enabled. - * - * (Implementation Note: The RB tree seems to be better/faster - * than any hash algo I could think of for this problem, even - * with the penalty of slow pointer chases for d-cache misses). - */ -struct pci_io_addr_range -{ - struct rb_node rb_node; - unsigned long addr_lo; - unsigned long addr_hi; - struct pci_dev *pcidev; - unsigned int flags; -}; - -static struct pci_io_addr_cache -{ - struct rb_root rb_root; - spinlock_t piar_lock; -} pci_io_addr_cache_root; - -static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr) -{ - struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node; - - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - - if (addr < piar->addr_lo) { - n = n->rb_left; - } else { - if (addr > piar->addr_hi) { - n = n->rb_right; - } else { - pci_dev_get(piar->pcidev); - return piar->pcidev; - } - } - } - - return NULL; -} - -/** - * pci_get_device_by_addr - Get device, given only address - * @addr: mmio (PIO) phys address or i/o port number - * - * Given an mmio phys address, or a port number, find a pci device - * that implements this address. Be sure to pci_dev_put the device - * when finished. I/O port numbers are assumed to be offset - * from zero (that is, they do *not* have pci_io_addr added in). - * It is safe to call this function within an interrupt. - */ -static struct pci_dev *pci_get_device_by_addr(unsigned long addr) -{ - struct pci_dev *dev; - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - dev = __pci_get_device_by_addr(addr); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); - return dev; -} - -#ifdef DEBUG -/* - * Handy-dandy debug print routine, does nothing more - * than print out the contents of our addr cache. - */ -static void pci_addr_cache_print(struct pci_io_addr_cache *cache) -{ - struct rb_node *n; - int cnt = 0; - - n = rb_first(&cache->rb_root); - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n", - (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt, - piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev)); - cnt++; - n = rb_next(n); - } -} -#endif - -/* Insert address range into the rb tree. */ -static struct pci_io_addr_range * -pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, - unsigned long ahi, unsigned int flags) -{ - struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node; - struct rb_node *parent = NULL; - struct pci_io_addr_range *piar; - - /* Walk tree, find a place to insert into tree */ - while (*p) { - parent = *p; - piar = rb_entry(parent, struct pci_io_addr_range, rb_node); - if (alo < piar->addr_lo) { - p = &parent->rb_left; - } else if (ahi > piar->addr_hi) { - p = &parent->rb_right; - } else { - if (dev != piar->pcidev || - alo != piar->addr_lo || ahi != piar->addr_hi) { - printk(KERN_WARNING "PIAR: overlapping address range\n"); - } - return piar; - } - } - piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC); - if (!piar) - return NULL; - - piar->addr_lo = alo; - piar->addr_hi = ahi; - piar->pcidev = dev; - piar->flags = flags; - - rb_link_node(&piar->rb_node, parent, p); - rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); - - return piar; -} - -static void __pci_addr_cache_insert_device(struct pci_dev *dev) -{ - struct device_node *dn; - struct pci_dn *pdn; - int i; - int inserted = 0; - - dn = pci_device_to_OF_node(dev); - if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", - pci_name(dev)); - return; - } - - /* Skip any devices for which EEH is not enabled. */ - pdn = dn->data; - if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || - pdn->eeh_mode & EEH_MODE_NOCHECK) { -#ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s\n", - pci_name(dev)); -#endif - return; - } - - /* The cache holds a reference to the device... */ - pci_dev_get(dev); - - /* Walk resources on this device, poke them into the tree */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - unsigned long start = pci_resource_start(dev,i); - unsigned long end = pci_resource_end(dev,i); - unsigned int flags = pci_resource_flags(dev,i); - - /* We are interested only bus addresses, not dma or other stuff */ - if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if (start == 0 || ~start == 0 || end == 0 || ~end == 0) - continue; - pci_addr_cache_insert(dev, start, end, flags); - inserted = 1; - } - - /* If there was nothing to add, the cache has no reference... */ - if (!inserted) - pci_dev_put(dev); -} - -/** - * pci_addr_cache_insert_device - Add a device to the address cache - * @dev: PCI device whose I/O addresses we are interested in. - * - * In order to support the fast lookup of devices based on addresses, - * we maintain a cache of devices that can be quickly searched. - * This routine adds a device to that cache. - */ -void pci_addr_cache_insert_device(struct pci_dev *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - __pci_addr_cache_insert_device(dev); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); -} - -static inline void __pci_addr_cache_remove_device(struct pci_dev *dev) -{ - struct rb_node *n; - int removed = 0; - -restart: - n = rb_first(&pci_io_addr_cache_root.rb_root); - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - - if (piar->pcidev == dev) { - rb_erase(n, &pci_io_addr_cache_root.rb_root); - removed = 1; - kfree(piar); - goto restart; - } - n = rb_next(n); - } - - /* The cache no longer holds its reference to this device... */ - if (removed) - pci_dev_put(dev); -} - -/** - * pci_addr_cache_remove_device - remove pci device from addr cache - * @dev: device to remove - * - * Remove a device from the addr-cache tree. - * This is potentially expensive, since it will walk - * the tree multiple times (once per resource). - * But so what; device removal doesn't need to be that fast. - */ -void pci_addr_cache_remove_device(struct pci_dev *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - __pci_addr_cache_remove_device(dev); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); -} - -/** - * pci_addr_cache_build - Build a cache of I/O addresses - * - * Build a cache of pci i/o addresses. This cache will be used to - * find the pci device that corresponds to a given address. - * This routine scans all pci busses to build the cache. - * Must be run late in boot process, after the pci controllers - * have been scaned for devices (after all device resources are known). - */ -void __init pci_addr_cache_build(void) -{ - struct pci_dev *dev = NULL; - - spin_lock_init(&pci_io_addr_cache_root.piar_lock); - - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - /* Ignore PCI bridges ( XXX why ??) */ - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) { - continue; - } - pci_addr_cache_insert_device(dev); - } - -#ifdef DEBUG - /* Verify tree built up above, echo back the list of addrs. */ - pci_addr_cache_print(&pci_io_addr_cache_root); -#endif -} - -/* --------------------------------------------------------------- */ -/* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */ - -/** - * eeh_register_notifier - Register to find out about EEH events. - * @nb: notifier block to callback on events - */ -int eeh_register_notifier(struct notifier_block *nb) -{ - return notifier_chain_register(&eeh_notifier_chain, nb); -} - -/** - * eeh_unregister_notifier - Unregister to an EEH event notifier. - * @nb: notifier block to callback on events - */ -int eeh_unregister_notifier(struct notifier_block *nb) -{ - return notifier_chain_unregister(&eeh_notifier_chain, nb); -} - -/** - * read_slot_reset_state - Read the reset state of a device node's slot - * @dn: device node to read - * @rets: array to return results in - */ -static int read_slot_reset_state(struct device_node *dn, int rets[]) -{ - int token, outputs; - struct pci_dn *pdn = dn->data; - - if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { - token = ibm_read_slot_reset_state2; - outputs = 4; - } else { - token = ibm_read_slot_reset_state; - outputs = 3; - } - - return rtas_call(token, 3, outputs, rets, pdn->eeh_config_addr, - BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid)); -} - -/** - * eeh_panic - call panic() for an eeh event that cannot be handled. - * The philosophy of this routine is that it is better to panic and - * halt the OS than it is to risk possible data corruption by - * oblivious device drivers that don't know better. - * - * @dev pci device that had an eeh event - * @reset_state current reset state of the device slot - */ -static void eeh_panic(struct pci_dev *dev, int reset_state) -{ - /* - * XXX We should create a separate sysctl for this. - * - * Since the panic_on_oops sysctl is used to halt the system - * in light of potential corruption, we can use it here. - */ - if (panic_on_oops) - panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, - pci_name(dev)); - else { - __get_cpu_var(ignored_failures)++; - printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", - reset_state, pci_name(dev)); - } -} - -/** - * eeh_event_handler - dispatch EEH events. The detection of a frozen - * slot can occur inside an interrupt, where it can be hard to do - * anything about it. The goal of this routine is to pull these - * detection events out of the context of the interrupt handler, and - * re-dispatch them for processing at a later time in a normal context. - * - * @dummy - unused - */ -static void eeh_event_handler(void *dummy) -{ - unsigned long flags; - struct eeh_event *event; - - while (1) { - spin_lock_irqsave(&eeh_eventlist_lock, flags); - event = NULL; - if (!list_empty(&eeh_eventlist)) { - event = list_entry(eeh_eventlist.next, struct eeh_event, list); - list_del(&event->list); - } - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - if (event == NULL) - break; - - printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device " - "%s\n", event->reset_state, - pci_name(event->dev)); - - atomic_set(&eeh_fail_count, 0); - notifier_call_chain (&eeh_notifier_chain, - EEH_NOTIFY_FREEZE, event); - - __get_cpu_var(slot_resets)++; - - pci_dev_put(event->dev); - kfree(event); - } -} - -/** - * eeh_token_to_phys - convert EEH address token to phys address - * @token i/o token, should be address in the form 0xE.... - */ -static inline unsigned long eeh_token_to_phys(unsigned long token) -{ - pte_t *ptep; - unsigned long pa; - - ptep = find_linux_pte(init_mm.pgd, token); - if (!ptep) - return token; - pa = pte_pfn(*ptep) << PAGE_SHIFT; - - return pa | (token & (PAGE_SIZE-1)); -} - -/** - * eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze - * @dn device node - * @dev pci device, if known - * - * Check for an EEH failure for the given device node. Call this - * routine if the result of a read was all 0xff's and you want to - * find out if this is due to an EEH slot freeze. This routine - * will query firmware for the EEH status. - * - * Returns 0 if there has not been an EEH error; otherwise returns - * a non-zero value and queues up a solt isolation event notification. - * - * It is safe to call this routine in an interrupt context. - */ -int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) -{ - int ret; - int rets[3]; - unsigned long flags; - int rc, reset_state; - struct eeh_event *event; - struct pci_dn *pdn; - - __get_cpu_var(total_mmio_ffs)++; - - if (!eeh_subsystem_enabled) - return 0; - - if (!dn) - return 0; - pdn = dn->data; - - /* Access to IO BARs might get this far and still not want checking. */ - if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) || - pdn->eeh_mode & EEH_MODE_NOCHECK) { - return 0; - } - - if (!pdn->eeh_config_addr) { - return 0; - } - - /* - * If we already have a pending isolation event for this - * slot, we know it's bad already, we don't need to check... - */ - if (pdn->eeh_mode & EEH_MODE_ISOLATED) { - atomic_inc(&eeh_fail_count); - if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) { - /* re-read the slot reset state */ - if (read_slot_reset_state(dn, rets) != 0) - rets[0] = -1; /* reset state unknown */ - eeh_panic(dev, rets[0]); - } - return 0; - } - - /* - * Now test for an EEH failure. This is VERY expensive. - * Note that the eeh_config_addr may be a parent device - * in the case of a device behind a bridge, or it may be - * function zero of a multi-function device. - * In any case they must share a common PHB. - */ - ret = read_slot_reset_state(dn, rets); - if (!(ret == 0 && rets[1] == 1 && (rets[0] == 2 || rets[0] == 4))) { - __get_cpu_var(false_positives)++; - return 0; - } - - /* prevent repeated reports of this failure */ - pdn->eeh_mode |= EEH_MODE_ISOLATED; - - reset_state = rets[0]; - - spin_lock_irqsave(&slot_errbuf_lock, flags); - memset(slot_errbuf, 0, eeh_error_buf_size); - - rc = rtas_call(ibm_slot_error_detail, - 8, 1, NULL, pdn->eeh_config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), NULL, 0, - virt_to_phys(slot_errbuf), - eeh_error_buf_size, - 1 /* Temporary Error */); - - if (rc == 0) - log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); - spin_unlock_irqrestore(&slot_errbuf_lock, flags); - - printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n", - rets[0], dn->name, dn->full_name); - event = kmalloc(sizeof(*event), GFP_ATOMIC); - if (event == NULL) { - eeh_panic(dev, reset_state); - return 1; - } - - event->dev = dev; - event->dn = dn; - event->reset_state = reset_state; - - /* We may or may not be called in an interrupt context */ - spin_lock_irqsave(&eeh_eventlist_lock, flags); - list_add(&event->list, &eeh_eventlist); - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - - /* Most EEH events are due to device driver bugs. Having - * a stack trace will help the device-driver authors figure - * out what happened. So print that out. */ - dump_stack(); - schedule_work(&eeh_event_wq); - - return 0; -} - -EXPORT_SYMBOL(eeh_dn_check_failure); - -/** - * eeh_check_failure - check if all 1's data is due to EEH slot freeze - * @token i/o token, should be address in the form 0xA.... - * @val value, should be all 1's (XXX why do we need this arg??) - * - * Check for an eeh failure at the given token address. - * Check for an EEH failure at the given token address. Call this - * routine if the result of a read was all 0xff's and you want to - * find out if this is due to an EEH slot freeze event. This routine - * will query firmware for the EEH status. - * - * Note this routine is safe to call in an interrupt context. - */ -unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val) -{ - unsigned long addr; - struct pci_dev *dev; - struct device_node *dn; - - /* Finding the phys addr + pci device; this is pretty quick. */ - addr = eeh_token_to_phys((unsigned long __force) token); - dev = pci_get_device_by_addr(addr); - if (!dev) - return val; - - dn = pci_device_to_OF_node(dev); - eeh_dn_check_failure (dn, dev); - - pci_dev_put(dev); - return val; -} - -EXPORT_SYMBOL(eeh_check_failure); - -struct eeh_early_enable_info { - unsigned int buid_hi; - unsigned int buid_lo; -}; - -/* Enable eeh for the given device node. */ -static void *early_enable_eeh(struct device_node *dn, void *data) -{ - struct eeh_early_enable_info *info = data; - int ret; - char *status = get_property(dn, "status", NULL); - u32 *class_code = (u32 *)get_property(dn, "class-code", NULL); - u32 *vendor_id = (u32 *)get_property(dn, "vendor-id", NULL); - u32 *device_id = (u32 *)get_property(dn, "device-id", NULL); - u32 *regs; - int enable; - struct pci_dn *pdn = dn->data; - - pdn->eeh_mode = 0; - - if (status && strcmp(status, "ok") != 0) - return NULL; /* ignore devices with bad status */ - - /* Ignore bad nodes. */ - if (!class_code || !vendor_id || !device_id) - return NULL; - - /* There is nothing to check on PCI to ISA bridges */ - if (dn->type && !strcmp(dn->type, "isa")) { - pdn->eeh_mode |= EEH_MODE_NOCHECK; - return NULL; - } - - /* - * Now decide if we are going to "Disable" EEH checking - * for this device. We still run with the EEH hardware active, - * but we won't be checking for ff's. This means a driver - * could return bad data (very bad!), an interrupt handler could - * hang waiting on status bits that won't change, etc. - * But there are a few cases like display devices that make sense. - */ - enable = 1; /* i.e. we will do checking */ - if ((*class_code >> 16) == PCI_BASE_CLASS_DISPLAY) - enable = 0; - - if (!enable) - pdn->eeh_mode |= EEH_MODE_NOCHECK; - - /* Ok... see if this device supports EEH. Some do, some don't, - * and the only way to find out is to check each and every one. */ - regs = (u32 *)get_property(dn, "reg", NULL); - if (regs) { - /* First register entry is addr (00BBSS00) */ - /* Try to enable eeh */ - ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, - regs[0], info->buid_hi, info->buid_lo, - EEH_ENABLE); - if (ret == 0) { - eeh_subsystem_enabled = 1; - pdn->eeh_mode |= EEH_MODE_SUPPORTED; - pdn->eeh_config_addr = regs[0]; -#ifdef DEBUG - printk(KERN_DEBUG "EEH: %s: eeh enabled\n", dn->full_name); -#endif - } else { - - /* This device doesn't support EEH, but it may have an - * EEH parent, in which case we mark it as supported. */ - if (dn->parent && dn->parent->data - && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { - /* Parent supports EEH. */ - pdn->eeh_mode |= EEH_MODE_SUPPORTED; - pdn->eeh_config_addr = PCI_DN(dn->parent)->eeh_config_addr; - return NULL; - } - } - } else { - printk(KERN_WARNING "EEH: %s: unable to get reg property.\n", - dn->full_name); - } - - return NULL; -} - -/* - * Initialize EEH by trying to enable it for all of the adapters in the system. - * As a side effect we can determine here if eeh is supported at all. - * Note that we leave EEH on so failed config cycles won't cause a machine - * check. If a user turns off EEH for a particular adapter they are really - * telling Linux to ignore errors. Some hardware (e.g. POWER5) won't - * grant access to a slot if EEH isn't enabled, and so we always enable - * EEH for all slots/all devices. - * - * The eeh-force-off option disables EEH checking globally, for all slots. - * Even if force-off is set, the EEH hardware is still enabled, so that - * newer systems can boot. - */ -void __init eeh_init(void) -{ - struct device_node *phb, *np; - struct eeh_early_enable_info info; - - np = of_find_node_by_path("/rtas"); - if (np == NULL) - return; - - ibm_set_eeh_option = rtas_token("ibm,set-eeh-option"); - ibm_set_slot_reset = rtas_token("ibm,set-slot-reset"); - ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2"); - ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); - ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); - - if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) - return; - - eeh_error_buf_size = rtas_token("rtas-error-log-max"); - if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) { - eeh_error_buf_size = 1024; - } - if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) { - printk(KERN_WARNING "EEH: rtas-error-log-max is bigger than allocated " - "buffer ! (%d vs %d)", eeh_error_buf_size, RTAS_ERROR_LOG_MAX); - eeh_error_buf_size = RTAS_ERROR_LOG_MAX; - } - - /* Enable EEH for all adapters. Note that eeh requires buid's */ - for (phb = of_find_node_by_name(NULL, "pci"); phb; - phb = of_find_node_by_name(phb, "pci")) { - unsigned long buid; - struct pci_dn *pci; - - buid = get_phb_buid(phb); - if (buid == 0 || phb->data == NULL) - continue; - - pci = phb->data; - info.buid_lo = BUID_LO(buid); - info.buid_hi = BUID_HI(buid); - traverse_pci_devices(phb, early_enable_eeh, &info); - } - - if (eeh_subsystem_enabled) - printk(KERN_INFO "EEH: PCI Enhanced I/O Error Handling Enabled\n"); - else - printk(KERN_WARNING "EEH: No capable adapters found\n"); -} - -/** - * eeh_add_device_early - enable EEH for the indicated device_node - * @dn: device node for which to set up EEH - * - * This routine must be used to perform EEH initialization for PCI - * devices that were added after system boot (e.g. hotplug, dlpar). - * This routine must be called before any i/o is performed to the - * adapter (inluding any config-space i/o). - * Whether this actually enables EEH or not for this device depends - * on the CEC architecture, type of the device, on earlier boot - * command-line arguments & etc. - */ -void eeh_add_device_early(struct device_node *dn) -{ - struct pci_controller *phb; - struct eeh_early_enable_info info; - - if (!dn || !dn->data) - return; - phb = PCI_DN(dn)->phb; - if (NULL == phb || 0 == phb->buid) { - printk(KERN_WARNING "EEH: Expected buid but found none\n"); - return; - } - - info.buid_hi = BUID_HI(phb->buid); - info.buid_lo = BUID_LO(phb->buid); - early_enable_eeh(dn, &info); -} -EXPORT_SYMBOL(eeh_add_device_early); - -/** - * eeh_add_device_late - perform EEH initialization for the indicated pci device - * @dev: pci device for which to set up EEH - * - * This routine must be used to complete EEH initialization for PCI - * devices that were added after system boot (e.g. hotplug, dlpar). - */ -void eeh_add_device_late(struct pci_dev *dev) -{ - if (!dev || !eeh_subsystem_enabled) - return; - -#ifdef DEBUG - printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev)); -#endif - - pci_addr_cache_insert_device (dev); -} -EXPORT_SYMBOL(eeh_add_device_late); - -/** - * eeh_remove_device - undo EEH setup for the indicated pci device - * @dev: pci device to be removed - * - * This routine should be when a device is removed from a running - * system (e.g. by hotplug or dlpar). - */ -void eeh_remove_device(struct pci_dev *dev) -{ - if (!dev || !eeh_subsystem_enabled) - return; - - /* Unregister the device with the EEH/PCI address search system */ -#ifdef DEBUG - printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev)); -#endif - pci_addr_cache_remove_device(dev); -} -EXPORT_SYMBOL(eeh_remove_device); - -static int proc_eeh_show(struct seq_file *m, void *v) -{ - unsigned int cpu; - unsigned long ffs = 0, positives = 0, failures = 0; - unsigned long resets = 0; - - for_each_cpu(cpu) { - ffs += per_cpu(total_mmio_ffs, cpu); - positives += per_cpu(false_positives, cpu); - failures += per_cpu(ignored_failures, cpu); - resets += per_cpu(slot_resets, cpu); - } - - if (0 == eeh_subsystem_enabled) { - seq_printf(m, "EEH Subsystem is globally disabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs); - } else { - seq_printf(m, "EEH Subsystem is enabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%ld\n" - "eeh_false_positives=%ld\n" - "eeh_ignored_failures=%ld\n" - "eeh_slot_resets=%ld\n" - "eeh_fail_count=%d\n", - ffs, positives, failures, resets, - eeh_fail_count.counter); - } - - return 0; -} - -static int proc_eeh_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_eeh_show, NULL); -} - -static struct file_operations proc_eeh_operations = { - .open = proc_eeh_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init eeh_init_proc(void) -{ - struct proc_dir_entry *e; - - if (systemcfg->platform & PLATFORM_PSERIES) { - e = create_proc_entry("ppc64/eeh", 0, NULL); - if (e) - e->proc_fops = &proc_eeh_operations; - } - - return 0; -} -__initcall(eeh_init_proc); diff --git a/arch/ppc64/kernel/firmware.c b/arch/ppc64/kernel/firmware.c deleted file mode 100644 index d8432c0fb27d..000000000000 --- a/arch/ppc64/kernel/firmware.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/ppc64/kernel/firmware.c - * - * Extracted from cputable.c - * - * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * Modifications for ppc64: - * Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com> - * Copyright (C) 2005 Stephen Rothwell, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> - -#include <asm/firmware.h> - -unsigned long ppc64_firmware_features; - -#ifdef CONFIG_PPC_PSERIES -firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { - {FW_FEATURE_PFT, "hcall-pft"}, - {FW_FEATURE_TCE, "hcall-tce"}, - {FW_FEATURE_SPRG0, "hcall-sprg0"}, - {FW_FEATURE_DABR, "hcall-dabr"}, - {FW_FEATURE_COPY, "hcall-copy"}, - {FW_FEATURE_ASR, "hcall-asr"}, - {FW_FEATURE_DEBUG, "hcall-debug"}, - {FW_FEATURE_PERF, "hcall-perf"}, - {FW_FEATURE_DUMP, "hcall-dump"}, - {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, - {FW_FEATURE_MIGRATE, "hcall-migrate"}, - {FW_FEATURE_PERFMON, "hcall-perfmon"}, - {FW_FEATURE_CRQ, "hcall-crq"}, - {FW_FEATURE_VIO, "hcall-vio"}, - {FW_FEATURE_RDMA, "hcall-rdma"}, - {FW_FEATURE_LLAN, "hcall-lLAN"}, - {FW_FEATURE_BULK, "hcall-bulk"}, - {FW_FEATURE_XDABR, "hcall-xdabr"}, - {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, - {FW_FEATURE_SPLPAR, "hcall-splpar"}, -}; -#endif diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 8fec27469802..715bc0e71e0f 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -34,15 +34,11 @@ extern void power4_idle(void); void default_idle(void) { - long oldval; unsigned int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { while (!need_resched() && !cpu_is_offline(cpu)) { ppc64_runlatch_off(); @@ -55,13 +51,12 @@ void default_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); } @@ -77,7 +72,9 @@ void native_idle(void) if (need_resched()) { ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } if (cpu_is_offline(smp_processor_id()) && diff --git a/arch/ppc64/kernel/ioctl32.c b/arch/ppc64/kernel/ioctl32.c deleted file mode 100644 index ba4a899045c2..000000000000 --- a/arch/ppc64/kernel/ioctl32.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * ioctl32.c: Conversion between 32bit and 64bit native ioctls. - * - * Based on sparc64 ioctl32.c by: - * - * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) - * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) - * - * ppc64 changes: - * - * Copyright (C) 2000 Ken Aaker (kdaaker@rchland.vnet.ibm.com) - * Copyright (C) 2001 Anton Blanchard (antonb@au.ibm.com) - * - * These routines maintain argument size conversion between 32bit and 64bit - * ioctls. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define INCLUDES -#include "compat_ioctl.c" -#include <linux/syscalls.h> - -#define CODE -#include "compat_ioctl.c" - -#define HANDLE_IOCTL(cmd,handler) { cmd, (ioctl_trans_handler_t)handler, NULL }, -#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl) - -#define IOCTL_TABLE_START \ - struct ioctl_trans ioctl_start[] = { -#define IOCTL_TABLE_END \ - }; - -IOCTL_TABLE_START -#include <linux/compat_ioctl.h> -#define DECLARES -#include "compat_ioctl.c" - -/* Little p (/dev/rtc, /dev/envctrl, etc.) */ -COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ -COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ - -IOCTL_TABLE_END - -int ioctl_table_size = ARRAY_SIZE(ioctl_start); diff --git a/arch/ppc64/kernel/pacaData.c b/arch/ppc64/kernel/pacaData.c deleted file mode 100644 index 3133c72b28ec..000000000000 --- a/arch/ppc64/kernel/pacaData.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/types.h> -#include <linux/threads.h> -#include <linux/module.h> - -#include <asm/processor.h> -#include <asm/ptrace.h> -#include <asm/page.h> - -#include <asm/lppaca.h> -#include <asm/iseries/it_lp_queue.h> -#include <asm/paca.h> - -static union { - struct systemcfg data; - u8 page[PAGE_SIZE]; -} systemcfg_store __attribute__((__section__(".data.page.aligned"))); -struct systemcfg *systemcfg = &systemcfg_store.data; -EXPORT_SYMBOL(systemcfg); - - -/* This symbol is provided by the linker - let it fill in the paca - * field correctly */ -extern unsigned long __toc_start; - -/* The Paca is an array with one entry per processor. Each contains an - * lppaca, which contains the information shared between the - * hypervisor and Linux. Each also contains an ItLpRegSave area which - * is used by the hypervisor to save registers. - * On systems with hardware multi-threading, there are two threads - * per processor. The Paca array must contain an entry for each thread. - * The VPD Areas will give a max logical processors = 2 * max physical - * processors. The processor VPD array needs one entry per physical - * processor (not thread). - */ -#define PACA_INIT_COMMON(number, start, asrr, asrv) \ - .lock_token = 0x8000, \ - .paca_index = (number), /* Paca Index */ \ - .default_decr = 0x00ff0000, /* Initial Decr */ \ - .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \ - .stab_real = (asrr), /* Real pointer to segment table */ \ - .stab_addr = (asrv), /* Virt pointer to segment table */ \ - .cpu_start = (start), /* Processor start */ \ - .hw_cpu_id = 0xffff, \ - .lppaca = { \ - .desc = 0xd397d781, /* "LpPa" */ \ - .size = sizeof(struct lppaca), \ - .dyn_proc_status = 2, \ - .decr_val = 0x00ff0000, \ - .fpregs_in_use = 1, \ - .end_of_quantum = 0xfffffffffffffffful, \ - .slb_count = 64, \ - .vmxregs_in_use = 0, \ - }, \ - -#ifdef CONFIG_PPC_ISERIES -#define PACA_INIT_ISERIES(number) \ - .lppaca_ptr = &paca[number].lppaca, \ - .reg_save_ptr = &paca[number].reg_save, \ - .reg_save = { \ - .xDesc = 0xd397d9e2, /* "LpRS" */ \ - .xSize = sizeof(struct ItLpRegSave) \ - } - -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 0, 0, 0) \ - PACA_INIT_ISERIES(number) \ -} - -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \ - PACA_INIT_ISERIES(number) \ -} - -#else -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 0, 0, 0) \ -} - -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \ -} -#endif - -struct paca_struct paca[] = { - BOOTCPU_PACA_INIT(0), -#if NR_CPUS > 1 - PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3), -#if NR_CPUS > 4 - PACA_INIT( 4), PACA_INIT( 5), PACA_INIT( 6), PACA_INIT( 7), -#if NR_CPUS > 8 - PACA_INIT( 8), PACA_INIT( 9), PACA_INIT( 10), PACA_INIT( 11), - PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15), - PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19), - PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23), - PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27), - PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31), -#if NR_CPUS > 32 - PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35), - PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39), - PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43), - PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47), - PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51), - PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55), - PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59), - PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63), -#if NR_CPUS > 64 - PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67), - PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71), - PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75), - PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79), - PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83), - PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87), - PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91), - PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95), - PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99), - PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103), - PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107), - PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111), - PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115), - PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119), - PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123), - PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127), -#endif -#endif -#endif -#endif -#endif -}; -EXPORT_SYMBOL(paca); diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/ppc64/kernel/pci_dn.c index 1a443a7ada4c..12c4c9e9bbc7 100644 --- a/arch/ppc64/kernel/pci_dn.c +++ b/arch/ppc64/kernel/pci_dn.c @@ -43,7 +43,7 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) u32 *regs; struct pci_dn *pdn; - if (phb->is_dynamic) + if (mem_init_done) pdn = kmalloc(sizeof(*pdn), GFP_KERNEL); else pdn = alloc_bootmem(sizeof(*pdn)); @@ -120,6 +120,14 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, return NULL; } +/** + * pci_devs_phb_init_dynamic - setup pci devices under this PHB + * phb: pci-to-host bridge (top-level bridge connecting to cpu) + * + * This routine is called both during boot, (before the memory + * subsystem is set up, before kmalloc is valid) and during the + * dynamic lpar operation of adding a PHB to a running system. + */ void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) { struct device_node * dn = (struct device_node *) phb->arch_data; @@ -201,9 +209,14 @@ static struct notifier_block pci_dn_reconfig_nb = { .notifier_call = pci_dn_reconfig_notifier, }; -/* - * Actually initialize the phbs. - * The buswalk on this phb has not happened yet. +/** + * pci_devs_phb_init - Initialize phbs and pci devs under them. + * + * This routine walks over all phb's (pci-host bridges) on the + * system, and sets up assorted pci-related structures + * (including pci info in the device node structs) for each + * pci device found underneath. This routine runs once, + * early in the boot sequence. */ void __init pci_devs_phb_init(void) { diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c index 3c3f19192fcc..0e5a8e116653 100644 --- a/arch/ppc64/kernel/rtas_pci.c +++ b/arch/ppc64/kernel/rtas_pci.c @@ -5,19 +5,19 @@ * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM * * RTAS specific routines for PCI. - * + * * Based on code from pci.c, chrp_pci.c and pSeries_pci.c * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA @@ -47,7 +47,7 @@ static int write_pci_config; static int ibm_read_pci_config; static int ibm_write_pci_config; -static int config_access_valid(struct pci_dn *dn, int where) +static inline int config_access_valid(struct pci_dn *dn, int where) { if (where < 256) return 1; @@ -72,16 +72,14 @@ static int of_device_available(struct device_node * dn) return 0; } -static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) +static int rtas_read_config(struct pci_dn *pdn, int where, int size, u32 *val) { int returnval = -1; unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -90,7 +88,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va buid = pdn->phb->buid; if (buid) { ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, buid >> 32, buid & 0xffffffff, size); + addr, BUID_HI(buid), BUID_LO(buid), size); } else { ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); } @@ -100,7 +98,7 @@ static int rtas_read_config(struct device_node *dn, int where, int size, u32 *va return PCIBIOS_DEVICE_NOT_FOUND; if (returnval == EEH_IO_ERROR_VALUE(size) && - eeh_dn_check_failure (dn, NULL)) + eeh_dn_check_failure (pdn->node, NULL)) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL; @@ -118,23 +116,23 @@ static int rtas_pci_read_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_read_config(dn, where, size, val); + return rtas_read_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } -int rtas_write_config(struct device_node *dn, int where, int size, u32 val) +int rtas_write_config(struct pci_dn *pdn, int where, int size, u32 val) { unsigned long buid, addr; int ret; - struct pci_dn *pdn; - if (!dn || !dn->data) + if (!pdn) return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; if (!config_access_valid(pdn, where)) return PCIBIOS_BAD_REGISTER_NUMBER; @@ -142,7 +140,8 @@ int rtas_write_config(struct device_node *dn, int where, int size, u32 val) (pdn->devfn << 8) | (where & 0xff); buid = pdn->phb->buid; if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); + ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, + BUID_HI(buid), BUID_LO(buid), size, (ulong) val); } else { ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); } @@ -165,10 +164,12 @@ static int rtas_pci_write_config(struct pci_bus *bus, busdn = bus->sysdata; /* must be a phb */ /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn + for (dn = busdn->child; dn; dn = dn->sibling) { + struct pci_dn *pdn = PCI_DN(dn); + if (pdn && pdn->devfn == devfn && of_device_available(dn)) - return rtas_write_config(dn, where, size, val); + return rtas_write_config(pdn, where, size, val); + } return PCIBIOS_DEVICE_NOT_FOUND; } @@ -221,7 +222,7 @@ static void python_countermeasures(struct device_node *dev, /* Python's register file is 1 MB in size. */ chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - /* + /* * Firmware doesn't always clear this bit which is critical * for good performance - Anton */ @@ -292,7 +293,7 @@ static int phb_set_bus_ranges(struct device_node *dev, if (bus_range == NULL || len < 2 * sizeof(int)) { return 1; } - + phb->first_busno = bus_range[0]; phb->last_busno = bus_range[1]; |