diff options
Diffstat (limited to 'arch/ppc/syslib/pci_auto.c')
| -rw-r--r-- | arch/ppc/syslib/pci_auto.c | 515 |
1 files changed, 0 insertions, 515 deletions
diff --git a/arch/ppc/syslib/pci_auto.c b/arch/ppc/syslib/pci_auto.c deleted file mode 100644 index ee20a86fcc4b..000000000000 --- a/arch/ppc/syslib/pci_auto.c +++ /dev/null @@ -1,515 +0,0 @@ -/* - * PCI autoconfiguration library - * - * Author: Matt Porter <mporter@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -/* - * The CardBus support is very preliminary. Preallocating space is - * the way to go but will require some change in card services to - * make it useful. Eventually this will ensure that we can put - * multiple CB bridges behind multiple P2P bridges. For now, at - * least it ensures that we place the CB bridge BAR and assigned - * initial bus numbers. I definitely need to do something about - * the lack of 16-bit I/O support. -MDP - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/pci.h> - -#include <asm/pci-bridge.h> - -#define PCIAUTO_IDE_MODE_MASK 0x05 - -#undef DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif /* DEBUG */ - -static int pciauto_upper_iospc; -static int pciauto_upper_memspc; - -void __init pciauto_setup_bars(struct pci_controller *hose, - int current_bus, - int pci_devfn, - int bar_limit) -{ - int bar_response, bar_size, bar_value; - int bar, addr_mask; - int * upper_limit; - int found_mem64 = 0; - - DBG("PCI Autoconfig: Found Bus %d, Device %d, Function %d\n", - current_bus, PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn) ); - - for (bar = PCI_BASE_ADDRESS_0; bar <= bar_limit; bar+=4) { - /* Tickle the BAR and get the response */ - early_write_config_dword(hose, - current_bus, - pci_devfn, - bar, - 0xffffffff); - early_read_config_dword(hose, - current_bus, - pci_devfn, - bar, - &bar_response); - - /* If BAR is not implemented go to the next BAR */ - if (!bar_response) - continue; - - /* Check the BAR type and set our address mask */ - if (bar_response & PCI_BASE_ADDRESS_SPACE) { - addr_mask = PCI_BASE_ADDRESS_IO_MASK; - upper_limit = &pciauto_upper_iospc; - DBG("PCI Autoconfig: BAR 0x%x, I/O, ", bar); - } else { - if ( (bar_response & PCI_BASE_ADDRESS_MEM_TYPE_MASK) == - PCI_BASE_ADDRESS_MEM_TYPE_64) - found_mem64 = 1; - - addr_mask = PCI_BASE_ADDRESS_MEM_MASK; - upper_limit = &pciauto_upper_memspc; - DBG("PCI Autoconfig: BAR 0x%x, Mem ", bar); - } - - /* Calculate requested size */ - bar_size = ~(bar_response & addr_mask) + 1; - - /* Allocate a base address */ - bar_value = (*upper_limit - bar_size) & ~(bar_size - 1); - - /* Write it out and update our limit */ - early_write_config_dword(hose, - current_bus, - pci_devfn, - bar, - bar_value); - - *upper_limit = bar_value; - - /* - * If we are a 64-bit decoder then increment to the - * upper 32 bits of the bar and force it to locate - * in the lower 4GB of memory. - */ - if (found_mem64) { - bar += 4; - early_write_config_dword(hose, - current_bus, - pci_devfn, - bar, - 0x00000000); - found_mem64 = 0; - } - - DBG("size=0x%x, address=0x%x\n", - bar_size, bar_value); - } - -} - -void __init pciauto_prescan_setup_bridge(struct pci_controller *hose, - int current_bus, - int pci_devfn, - int sub_bus, - int *iosave, - int *memsave) -{ - /* Configure bus number registers */ - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_PRIMARY_BUS, - current_bus); - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_SECONDARY_BUS, - sub_bus + 1); - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_SUBORDINATE_BUS, - 0xff); - - /* Round memory allocator to 1MB boundary */ - pciauto_upper_memspc &= ~(0x100000 - 1); - *memsave = pciauto_upper_memspc; - - /* Round I/O allocator to 4KB boundary */ - pciauto_upper_iospc &= ~(0x1000 - 1); - *iosave = pciauto_upper_iospc; - - /* Set up memory and I/O filter limits, assume 32-bit I/O space */ - early_write_config_word(hose, - current_bus, - pci_devfn, - PCI_MEMORY_LIMIT, - ((pciauto_upper_memspc - 1) & 0xfff00000) >> 16); - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_IO_LIMIT, - ((pciauto_upper_iospc - 1) & 0x0000f000) >> 8); - early_write_config_word(hose, - current_bus, - pci_devfn, - PCI_IO_LIMIT_UPPER16, - ((pciauto_upper_iospc - 1) & 0xffff0000) >> 16); - - /* Zero upper 32 bits of prefetchable base/limit */ - early_write_config_dword(hose, - current_bus, - pci_devfn, - PCI_PREF_BASE_UPPER32, - 0); - early_write_config_dword(hose, - current_bus, - pci_devfn, - PCI_PREF_LIMIT_UPPER32, - 0); -} - -void __init pciauto_postscan_setup_bridge(struct pci_controller *hose, - int current_bus, - int pci_devfn, - int sub_bus, - int *iosave, - int *memsave) -{ - int cmdstat; - - /* Configure bus number registers */ - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_SUBORDINATE_BUS, - sub_bus); - - /* - * Round memory allocator to 1MB boundary. - * If no space used, allocate minimum. - */ - pciauto_upper_memspc &= ~(0x100000 - 1); - if (*memsave == pciauto_upper_memspc) - pciauto_upper_memspc -= 0x00100000; - - early_write_config_word(hose, - current_bus, - pci_devfn, - PCI_MEMORY_BASE, - pciauto_upper_memspc >> 16); - - /* Allocate 1MB for pre-fretch */ - early_write_config_word(hose, - current_bus, - pci_devfn, - PCI_PREF_MEMORY_LIMIT, - ((pciauto_upper_memspc - 1) & 0xfff00000) >> 16); - - pciauto_upper_memspc -= 0x100000; - - early_write_config_word(hose, - current_bus, - pci_devfn, - PCI_PREF_MEMORY_BASE, - pciauto_upper_memspc >> 16); - - /* Round I/O allocator to 4KB boundary */ - pciauto_upper_iospc &= ~(0x1000 - 1); - if (*iosave == pciauto_upper_iospc) - pciauto_upper_iospc -= 0x1000; - - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_IO_BASE, - (pciauto_upper_iospc & 0x0000f000) >> 8); - early_write_config_word(hose, - current_bus, - pci_devfn, - PCI_IO_BASE_UPPER16, - pciauto_upper_iospc >> 16); - - /* Enable memory and I/O accesses, enable bus master */ - early_read_config_dword(hose, - current_bus, - pci_devfn, - PCI_COMMAND, - &cmdstat); - early_write_config_dword(hose, - current_bus, - pci_devfn, - PCI_COMMAND, - cmdstat | - PCI_COMMAND_IO | - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); -} - -void __init pciauto_prescan_setup_cardbus_bridge(struct pci_controller *hose, - int current_bus, - int pci_devfn, - int sub_bus, - int *iosave, - int *memsave) -{ - /* Configure bus number registers */ - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_PRIMARY_BUS, - current_bus); - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_SECONDARY_BUS, - sub_bus + 1); - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_SUBORDINATE_BUS, - 0xff); - - /* Round memory allocator to 4KB boundary */ - pciauto_upper_memspc &= ~(0x1000 - 1); - *memsave = pciauto_upper_memspc; - - /* Round I/O allocator to 4 byte boundary */ - pciauto_upper_iospc &= ~(0x4 - 1); - *iosave = pciauto_upper_iospc; - - /* Set up memory and I/O filter limits, assume 32-bit I/O space */ - early_write_config_dword(hose, - current_bus, - pci_devfn, - 0x20, - pciauto_upper_memspc - 1); - early_write_config_dword(hose, - current_bus, - pci_devfn, - 0x30, - pciauto_upper_iospc - 1); -} - -void __init pciauto_postscan_setup_cardbus_bridge(struct pci_controller *hose, - int current_bus, - int pci_devfn, - int sub_bus, - int *iosave, - int *memsave) -{ - int cmdstat; - - /* - * Configure subordinate bus number. The PCI subsystem - * bus scan will renumber buses (reserving three additional - * for this PCI<->CardBus bridge for the case where a CardBus - * adapter contains a P2P or CB2CB bridge. - */ - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_SUBORDINATE_BUS, - sub_bus); - - /* - * Reserve an additional 4MB for mem space and 16KB for - * I/O space. This should cover any additional space - * requirement of unusual CardBus devices with - * additional bridges that can consume more address space. - * - * Although pcmcia-cs currently will reprogram bridge - * windows, the goal is to add an option to leave them - * alone and use the bridge window ranges as the regions - * that are searched for free resources upon hot-insertion - * of a device. This will allow a PCI<->CardBus bridge - * configured by this routine to happily live behind a - * P2P bridge in a system. - */ - pciauto_upper_memspc -= 0x00400000; - pciauto_upper_iospc -= 0x00004000; - - /* Round memory allocator to 4KB boundary */ - pciauto_upper_memspc &= ~(0x1000 - 1); - - early_write_config_dword(hose, - current_bus, - pci_devfn, - 0x1c, - pciauto_upper_memspc); - - /* Round I/O allocator to 4 byte boundary */ - pciauto_upper_iospc &= ~(0x4 - 1); - early_write_config_dword(hose, - current_bus, - pci_devfn, - 0x2c, - pciauto_upper_iospc); - - /* Enable memory and I/O accesses, enable bus master */ - early_read_config_dword(hose, - current_bus, - pci_devfn, - PCI_COMMAND, - &cmdstat); - early_write_config_dword(hose, - current_bus, - pci_devfn, - PCI_COMMAND, - cmdstat | - PCI_COMMAND_IO | - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); -} - -int __init pciauto_bus_scan(struct pci_controller *hose, int current_bus) -{ - int sub_bus, pci_devfn, pci_class, cmdstat, found_multi = 0; - unsigned short vid; - unsigned char header_type; - - /* - * Fetch our I/O and memory space upper boundaries used - * to allocated base addresses on this hose. - */ - if (current_bus == hose->first_busno) { - pciauto_upper_iospc = hose->io_space.end + 1; - pciauto_upper_memspc = hose->mem_space.end + 1; - } - - sub_bus = current_bus; - - for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { - /* Skip our host bridge */ - if ( (current_bus == hose->first_busno) && (pci_devfn == 0) ) - continue; - - if (PCI_FUNC(pci_devfn) && !found_multi) - continue; - - /* If config space read fails from this device, move on */ - if (early_read_config_byte(hose, - current_bus, - pci_devfn, - PCI_HEADER_TYPE, - &header_type)) - continue; - - if (!PCI_FUNC(pci_devfn)) - found_multi = header_type & 0x80; - - early_read_config_word(hose, - current_bus, - pci_devfn, - PCI_VENDOR_ID, - &vid); - - if (vid != 0xffff) { - early_read_config_dword(hose, - current_bus, - pci_devfn, - PCI_CLASS_REVISION, &pci_class); - if ( (pci_class >> 16) == PCI_CLASS_BRIDGE_PCI ) { - int iosave, memsave; - - DBG("PCI Autoconfig: Found P2P bridge, device %d\n", PCI_SLOT(pci_devfn)); - /* Allocate PCI I/O and/or memory space */ - pciauto_setup_bars(hose, - current_bus, - pci_devfn, - PCI_BASE_ADDRESS_1); - - pciauto_prescan_setup_bridge(hose, - current_bus, - pci_devfn, - sub_bus, - &iosave, - &memsave); - sub_bus = pciauto_bus_scan(hose, sub_bus+1); - pciauto_postscan_setup_bridge(hose, - current_bus, - pci_devfn, - sub_bus, - &iosave, - &memsave); - } else if ((pci_class >> 16) == PCI_CLASS_BRIDGE_CARDBUS) { - int iosave, memsave; - - DBG("PCI Autoconfig: Found CardBus bridge, device %d function %d\n", PCI_SLOT(pci_devfn), PCI_FUNC(pci_devfn)); - /* Place CardBus Socket/ExCA registers */ - pciauto_setup_bars(hose, - current_bus, - pci_devfn, - PCI_BASE_ADDRESS_0); - - pciauto_prescan_setup_cardbus_bridge(hose, - current_bus, - pci_devfn, - sub_bus, - &iosave, - &memsave); - sub_bus = pciauto_bus_scan(hose, sub_bus+1); - pciauto_postscan_setup_cardbus_bridge(hose, - current_bus, - pci_devfn, - sub_bus, - &iosave, - &memsave); - } else { - if ((pci_class >> 16) == PCI_CLASS_STORAGE_IDE) { - unsigned char prg_iface; - - early_read_config_byte(hose, - current_bus, - pci_devfn, - PCI_CLASS_PROG, - &prg_iface); - if (!(prg_iface & PCIAUTO_IDE_MODE_MASK)) { - DBG("PCI Autoconfig: Skipping legacy mode IDE controller\n"); - continue; - } - } - /* Allocate PCI I/O and/or memory space */ - pciauto_setup_bars(hose, - current_bus, - pci_devfn, - PCI_BASE_ADDRESS_5); - - /* - * Enable some standard settings - */ - early_read_config_dword(hose, - current_bus, - pci_devfn, - PCI_COMMAND, - &cmdstat); - early_write_config_dword(hose, - current_bus, - pci_devfn, - PCI_COMMAND, - cmdstat | - PCI_COMMAND_IO | - PCI_COMMAND_MEMORY | - PCI_COMMAND_MASTER); - early_write_config_byte(hose, - current_bus, - pci_devfn, - PCI_LATENCY_TIMER, - 0x80); - } - } - } - return sub_bus; -} |