diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/Kconfig | 7 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/page.h | 10 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/prom.h | 3 | ||||
| -rw-r--r-- | arch/powerpc/kernel/lparcfg.c | 22 | ||||
| -rw-r--r-- | arch/powerpc/kernel/pci-common.c | 8 | ||||
| -rw-r--r-- | arch/powerpc/kernel/prom.c | 43 |
6 files changed, 27 insertions, 66 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index dbd9d3c991e8..5aecda05e0da 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -369,9 +369,9 @@ config KEXEC It is an ongoing process to be certain the hardware in a machine is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. + initially work for you. As of this writing the exact hardware + interface is strongly in flux, so no good recommendation can be + made. config CRASH_DUMP bool "Build a kdump crash kernel" @@ -979,6 +979,7 @@ config RELOCATABLE must live at a different physical address than the primary kernel. +# This value must have zeroes in the bottom 60 bits otherwise lots will break config PAGE_OFFSET hex default "0xc000000000000000" diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 988c812aab5b..b9f426212d3a 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -211,9 +211,19 @@ extern long long virt_phys_offset; #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + VIRT_PHYS_OFFSET)) #define __pa(x) ((unsigned long)(x) - VIRT_PHYS_OFFSET) #else +#ifdef CONFIG_PPC64 +/* + * gcc miscompiles (unsigned long)(&static_var) - PAGE_OFFSET + * with -mcmodel=medium, so we use & and | instead of - and + on 64-bit. + */ +#define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) | PAGE_OFFSET)) +#define __pa(x) ((unsigned long)(x) & 0x0fffffffffffffffUL) + +#else /* 32-bit, non book E */ #define __va(x) ((void *)(unsigned long)((phys_addr_t)(x) + PAGE_OFFSET - MEMORY_START)) #define __pa(x) ((unsigned long)(x) - PAGE_OFFSET + MEMORY_START) #endif +#endif /* * Unfortunately the PLT is in the BSS in the PPC32 ELF ABI, diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index bc2da154f68b..ac204e022922 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -43,9 +43,6 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, extern void kdump_move_device_tree(void); -/* CPU OF node matching */ -struct device_node *of_get_cpu_node(int cpu, unsigned int *thread); - /* cache lookup */ struct device_node *of_find_next_cache_node(struct device_node *np); diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index d92f3871e9cf..e2a0a162299b 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -35,7 +35,13 @@ #include <asm/vdso_datapage.h> #include <asm/vio.h> #include <asm/mmu.h> +#include <asm/machdep.h> + +/* + * This isn't a module but we expose that to userspace + * via /proc so leave the definitions here + */ #define MODULE_VERS "1.9" #define MODULE_NAME "lparcfg" @@ -418,7 +424,8 @@ static void parse_em_data(struct seq_file *m) { unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; - if (plpar_hcall(H_GET_EM_PARMS, retbuf) == H_SUCCESS) + if (firmware_has_feature(FW_FEATURE_LPAR) && + plpar_hcall(H_GET_EM_PARMS, retbuf) == H_SUCCESS) seq_printf(m, "power_mode_data=%016lx\n", retbuf[0]); } @@ -677,7 +684,6 @@ static int lparcfg_open(struct inode *inode, struct file *file) } static const struct file_operations lparcfg_fops = { - .owner = THIS_MODULE, .read = seq_read, .write = lparcfg_write, .open = lparcfg_open, @@ -699,14 +705,4 @@ static int __init lparcfg_init(void) } return 0; } - -static void __exit lparcfg_cleanup(void) -{ - remove_proc_subtree("powerpc/lparcfg", NULL); -} - -module_init(lparcfg_init); -module_exit(lparcfg_cleanup); -MODULE_DESCRIPTION("Interface for LPAR configuration data"); -MODULE_AUTHOR("Dave Engebretsen"); -MODULE_LICENSE("GPL"); +machine_device_initcall(pseries, lparcfg_init); diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 7d22a675fe1a..2b4a9a4db7d9 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1674,12 +1674,8 @@ void pcibios_scan_phb(struct pci_controller *hose) /* Configure PCI Express settings */ if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { struct pci_bus *child; - list_for_each_entry(child, &bus->children, node) { - struct pci_dev *self = child->self; - if (!self) - continue; - pcie_bus_configure_settings(child, self->pcie_mpss); - } + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); } } diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index eb23ac92abb9..1c14cd4a5e05 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -865,49 +865,10 @@ static int __init prom_reconfig_setup(void) __initcall(prom_reconfig_setup); #endif -/* Find the device node for a given logical cpu number, also returns the cpu - * local thread number (index in ibm,interrupt-server#s) if relevant and - * asked for (non NULL) - */ -struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) +bool arch_match_cpu_phys_id(int cpu, u64 phys_id) { - int hardid; - struct device_node *np; - - hardid = get_hard_smp_processor_id(cpu); - - for_each_node_by_type(np, "cpu") { - const u32 *intserv; - unsigned int plen, t; - - /* Check for ibm,ppc-interrupt-server#s. If it doesn't exist - * fallback to "reg" property and assume no threads - */ - intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", - &plen); - if (intserv == NULL) { - const u32 *reg = of_get_property(np, "reg", NULL); - if (reg == NULL) - continue; - if (*reg == hardid) { - if (thread) - *thread = 0; - return np; - } - } else { - plen /= sizeof(u32); - for (t = 0; t < plen; t++) { - if (hardid == intserv[t]) { - if (thread) - *thread = t; - return np; - } - } - } - } - return NULL; + return (int)phys_id == get_hard_smp_processor_id(cpu); } -EXPORT_SYMBOL(of_get_cpu_node); #if defined(CONFIG_DEBUG_FS) && defined(DEBUG) static struct debugfs_blob_wrapper flat_dt_blob; |