diff options
Diffstat (limited to 'arch/powerpc/sysdev/mpic_u3msi.c')
-rw-r--r-- | arch/powerpc/sysdev/mpic_u3msi.c | 48 |
1 files changed, 40 insertions, 8 deletions
diff --git a/arch/powerpc/sysdev/mpic_u3msi.c b/arch/powerpc/sysdev/mpic_u3msi.c index 0a8f5a9e87c9..bcbfe79c704b 100644 --- a/arch/powerpc/sysdev/mpic_u3msi.c +++ b/arch/powerpc/sysdev/mpic_u3msi.c @@ -42,7 +42,7 @@ static struct irq_chip mpic_u3msi_chip = { .eoi = mpic_end_irq, .set_type = mpic_set_irq_type, .set_affinity = mpic_set_affinity, - .typename = "MPIC-U3MSI", + .name = "MPIC-U3MSI", }; static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos) @@ -64,12 +64,12 @@ static u64 read_ht_magic_addr(struct pci_dev *pdev, unsigned int pos) return addr; } -static u64 find_ht_magic_addr(struct pci_dev *pdev) +static u64 find_ht_magic_addr(struct pci_dev *pdev, unsigned int hwirq) { struct pci_bus *bus; unsigned int pos; - for (bus = pdev->bus; bus; bus = bus->parent) { + for (bus = pdev->bus; bus && bus->self; bus = bus->parent) { pos = pci_find_ht_capability(bus->self, HT_CAPTYPE_MSI_MAPPING); if (pos) return read_ht_magic_addr(bus->self, pos); @@ -78,13 +78,41 @@ static u64 find_ht_magic_addr(struct pci_dev *pdev) return 0; } +static u64 find_u4_magic_addr(struct pci_dev *pdev, unsigned int hwirq) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + + /* U4 PCIe MSIs need to write to the special register in + * the bridge that generates interrupts. There should be + * theorically a register at 0xf8005000 where you just write + * the MSI number and that triggers the right interrupt, but + * unfortunately, this is busted in HW, the bridge endian swaps + * the value and hits the wrong nibble in the register. + * + * So instead we use another register set which is used normally + * for converting HT interrupts to MPIC interrupts, which decodes + * the interrupt number as part of the low address bits + * + * This will not work if we ever use more than one legacy MSI in + * a block but we never do. For one MSI or multiple MSI-X where + * each interrupt address can be specified separately, it works + * just fine. + */ + if (of_device_is_compatible(hose->dn, "u4-pcie") || + of_device_is_compatible(hose->dn, "U4-pcie")) + return 0xf8004000 | (hwirq << 4); + + return 0; +} + static int u3msi_msi_check_device(struct pci_dev *pdev, int nvec, int type) { if (type == PCI_CAP_ID_MSIX) pr_debug("u3msi: MSI-X untested, trying anyway.\n"); /* If we can't find a magic address then MSI ain't gonna work */ - if (find_ht_magic_addr(pdev) == 0) { + if (find_ht_magic_addr(pdev, 0) == 0 && + find_u4_magic_addr(pdev, 0) == 0) { pr_debug("u3msi: no magic address found for %s\n", pci_name(pdev)); return -ENXIO; @@ -118,10 +146,6 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) u64 addr; int hwirq; - addr = find_ht_magic_addr(pdev); - msg.address_lo = addr & 0xFFFFFFFF; - msg.address_hi = addr >> 32; - list_for_each_entry(entry, &pdev->msi_list, list) { hwirq = msi_bitmap_alloc_hwirqs(&msi_mpic->msi_bitmap, 1); if (hwirq < 0) { @@ -129,6 +153,12 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) return hwirq; } + addr = find_ht_magic_addr(pdev, hwirq); + if (addr == 0) + addr = find_u4_magic_addr(pdev, hwirq); + msg.address_lo = addr & 0xFFFFFFFF; + msg.address_hi = addr >> 32; + virq = irq_create_mapping(msi_mpic->irqhost, hwirq); if (virq == NO_IRQ) { pr_debug("u3msi: failed mapping hwirq 0x%x\n", hwirq); @@ -143,6 +173,8 @@ static int u3msi_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) pr_debug("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n", virq, hwirq, (unsigned long)addr); + printk("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n", + virq, hwirq, (unsigned long)addr); msg.data = hwirq; write_msi_msg(virq, &msg); |