summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/pseries/eeh.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/pseries/eeh.c')
-rw-r--r--arch/powerpc/platforms/pseries/eeh.c204
1 files changed, 118 insertions, 86 deletions
diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c
index 6cedbc002e0f..48fbd442e9df 100644
--- a/arch/powerpc/platforms/pseries/eeh.c
+++ b/arch/powerpc/platforms/pseries/eeh.c
@@ -74,7 +74,10 @@
* is broken and panic. This sets the threshold for how many read
* attempts we allow before panicking.
*/
-#define EEH_MAX_FAILS 100000
+#define EEH_MAX_FAILS 2100000
+
+/* Time to wait for a PCI slot to retport status, in milliseconds */
+#define PCI_BUS_RESET_WAIT_MSEC (60*1000)
/* RTAS tokens */
static int ibm_set_eeh_option;
@@ -83,6 +86,7 @@ static int ibm_read_slot_reset_state;
static int ibm_read_slot_reset_state2;
static int ibm_slot_error_detail;
static int ibm_get_config_addr_info;
+static int ibm_get_config_addr_info2;
static int ibm_configure_bridge;
int eeh_subsystem_enabled;
@@ -168,6 +172,55 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
}
/**
+ * eeh_wait_for_slot_status - returns error status of slot
+ * @pdn pci device node
+ * @max_wait_msecs maximum number to millisecs to wait
+ *
+ * Return negative value if a permanent error, else return
+ * Partition Endpoint (PE) status value.
+ *
+ * If @max_wait_msecs is positive, then this routine will
+ * sleep until a valid status can be obtained, or until
+ * the max allowed wait time is exceeded, in which case
+ * a -2 is returned.
+ */
+int
+eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs)
+{
+ int rc;
+ int rets[3];
+ int mwait;
+
+ while (1) {
+ rc = read_slot_reset_state(pdn, rets);
+ if (rc) return rc;
+ if (rets[1] == 0) return -1; /* EEH is not supported */
+
+ if (rets[0] != 5) return rets[0]; /* return actual status */
+
+ if (rets[2] == 0) return -1; /* permanently unavailable */
+
+ if (max_wait_msecs <= 0) return -1;
+
+ mwait = rets[2];
+ if (mwait <= 0) {
+ printk (KERN_WARNING
+ "EEH: Firmware returned bad wait value=%d\n", mwait);
+ mwait = 1000;
+ } else if (mwait > 300*1000) {
+ printk (KERN_WARNING
+ "EEH: Firmware is taking too long, time=%d\n", mwait);
+ mwait = 300*1000;
+ }
+ max_wait_msecs -= mwait;
+ msleep (mwait);
+ }
+
+ printk(KERN_WARNING "EEH: Timed out waiting for slot status\n");
+ return -2;
+}
+
+/**
* eeh_token_to_phys - convert EEH address token to phys address
* @token i/o token, should be address in the form 0xA....
*/
@@ -229,7 +282,7 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag)
dn = find_device_pe (dn);
/* Back up one, since config addrs might be shared */
- if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr)
+ if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
dn = dn->parent;
PCI_DN(dn)->eeh_mode |= mode_flag;
@@ -263,7 +316,7 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag)
dn = find_device_pe (dn);
/* Back up one, since config addrs might be shared */
- if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr)
+ if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
dn = dn->parent;
PCI_DN(dn)->eeh_mode &= ~mode_flag;
@@ -293,7 +346,6 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
int rets[3];
unsigned long flags;
struct pci_dn *pdn;
- enum pci_channel_state state;
int rc = 0;
total_mmio_ffs++;
@@ -367,25 +419,25 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
goto dn_unlock;
}
- /* If EEH is not supported on this device, punt. */
- if (rets[1] != 1) {
- printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n",
- ret, dn->full_name);
+ /* Note that config-io to empty slots may fail;
+ * they are empty when they don't have children. */
+ if ((rets[0] == 5) && (dn->child == NULL)) {
false_positives++;
rc = 0;
goto dn_unlock;
}
- /* If not the kind of error we know about, punt. */
- if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) {
+ /* If EEH is not supported on this device, punt. */
+ if (rets[1] != 1) {
+ printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n",
+ ret, dn->full_name);
false_positives++;
rc = 0;
goto dn_unlock;
}
- /* Note that config-io to empty slots may fail;
- * we recognize empty because they don't have children. */
- if ((rets[0] == 5) && (dn->child == NULL)) {
+ /* If not the kind of error we know about, punt. */
+ if (rets[0] != 1 && rets[0] != 2 && rets[0] != 4 && rets[0] != 5) {
false_positives++;
rc = 0;
goto dn_unlock;
@@ -399,17 +451,12 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
eeh_mark_slot (dn, EEH_MODE_ISOLATED);
spin_unlock_irqrestore(&confirm_error_lock, flags);
- state = pci_channel_io_normal;
- if ((rets[0] == 2) || (rets[0] == 4))
- state = pci_channel_io_frozen;
- if (rets[0] == 5)
- state = pci_channel_io_perm_failure;
- eeh_send_failure_event (dn, dev, state, rets[2]);
+ eeh_send_failure_event (dn, dev);
/* Most EEH events are due to device driver bugs. Having
* a stack trace will help the device-driver authors figure
* out what happened. So print that out. */
- if (rets[0] != 5) dump_stack();
+ dump_stack();
return 1;
dn_unlock:
@@ -458,38 +505,6 @@ EXPORT_SYMBOL(eeh_check_failure);
/* The code below deals with error recovery */
/**
- * eeh_slot_availability - returns error status of slot
- * @pdn pci device node
- *
- * Return negative value if a permanent error, else return
- * a number of milliseconds to wait until the PCI slot is
- * ready to be used.
- */
-static int
-eeh_slot_availability(struct pci_dn *pdn)
-{
- int rc;
- int rets[3];
-
- rc = read_slot_reset_state(pdn, rets);
-
- if (rc) return rc;
-
- if (rets[1] == 0) return -1; /* EEH is not supported */
- if (rets[0] == 0) return 0; /* Oll Korrect */
- if (rets[0] == 5) {
- if (rets[2] == 0) return -1; /* permanently unavailable */
- return rets[2]; /* number of millisecs to wait */
- }
- if (rets[0] == 1)
- return 250;
-
- printk (KERN_ERR "EEH: Slot unavailable: rc=%d, rets=%d %d %d\n",
- rc, rets[0], rets[1], rets[2]);
- return -2;
-}
-
-/**
* rtas_pci_enable - enable MMIO or DMA transfers for this slot
* @pdn pci device node
*/
@@ -512,9 +527,13 @@ rtas_pci_enable(struct pci_dn *pdn, int function)
function);
if (rc)
- printk(KERN_WARNING "EEH: Cannot enable function %d, err=%d dn=%s\n",
+ printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n",
function, rc, pdn->node->full_name);
+ rc = eeh_wait_for_slot_status (pdn, PCI_BUS_RESET_WAIT_MSEC);
+ if ((rc == 4) && (function == EEH_THAW_MMIO))
+ return 0;
+
return rc;
}
@@ -595,36 +614,24 @@ int rtas_set_slot_reset(struct pci_dn *pdn)
{
int i, rc;
- __rtas_set_slot_reset(pdn);
+ /* Take three shots at resetting the bus */
+ for (i=0; i<3; i++) {
+ __rtas_set_slot_reset(pdn);
- /* Now double check with the firmware to make sure the device is
- * ready to be used; if not, wait for recovery. */
- for (i=0; i<10; i++) {
- rc = eeh_slot_availability (pdn);
+ rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC);
if (rc == 0)
return 0;
- if (rc == -2) {
- printk (KERN_ERR "EEH: failed (%d) to reset slot %s\n",
- i, pdn->node->full_name);
- __rtas_set_slot_reset(pdn);
- continue;
- }
-
if (rc < 0) {
printk (KERN_ERR "EEH: unrecoverable slot failure %s\n",
pdn->node->full_name);
return -1;
}
-
- msleep (rc+100);
+ printk (KERN_ERR "EEH: bus reset %d failed on slot %s\n",
+ i+1, pdn->node->full_name);
}
- rc = eeh_slot_availability (pdn);
- if (rc)
- printk (KERN_ERR "EEH: timeout resetting slot %s\n", pdn->node->full_name);
-
- return rc;
+ return -1;
}
/* ------------------------------------------------------- */
@@ -744,16 +751,48 @@ struct eeh_early_enable_info {
unsigned int buid_lo;
};
+static int get_pe_addr (int config_addr,
+ struct eeh_early_enable_info *info)
+{
+ unsigned int rets[3];
+ int ret;
+
+ /* Use latest config-addr token on power6 */
+ if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
+ /* Make sure we have a PE in hand */
+ ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
+ config_addr, info->buid_hi, info->buid_lo, 1);
+ if (ret || (rets[0]==0))
+ return 0;
+
+ ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
+ config_addr, info->buid_hi, info->buid_lo, 0);
+ if (ret)
+ return 0;
+ return rets[0];
+ }
+
+ /* Use older config-addr token on power5 */
+ if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
+ ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets,
+ config_addr, info->buid_hi, info->buid_lo, 0);
+ if (ret)
+ return 0;
+ return rets[0];
+ }
+ return 0;
+}
+
/* Enable eeh for the given device node. */
static void *early_enable_eeh(struct device_node *dn, void *data)
{
unsigned int rets[3];
struct eeh_early_enable_info *info = data;
int ret;
- const char *status = get_property(dn, "status", NULL);
- const u32 *class_code = get_property(dn, "class-code", NULL);
- const u32 *vendor_id = get_property(dn, "vendor-id", NULL);
- const u32 *device_id = get_property(dn, "device-id", NULL);
+ const char *status = of_get_property(dn, "status", NULL);
+ const u32 *class_code = of_get_property(dn, "class-code", NULL);
+ const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
+ const u32 *device_id = of_get_property(dn, "device-id", NULL);
const u32 *regs;
int enable;
struct pci_dn *pdn = PCI_DN(dn);
@@ -796,7 +835,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
/* Ok... see if this device supports EEH. Some do, some don't,
* and the only way to find out is to check each and every one. */
- regs = get_property(dn, "reg", NULL);
+ regs = of_get_property(dn, "reg", NULL);
if (regs) {
/* First register entry is addr (00BBSS00) */
/* Try to enable eeh */
@@ -810,15 +849,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data)
/* If the newer, better, ibm,get-config-addr-info is supported,
* then use that instead. */
- pdn->eeh_pe_config_addr = 0;
- if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
- ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets,
- pdn->eeh_config_addr,
- info->buid_hi, info->buid_lo,
- 0);
- if (ret == 0)
- pdn->eeh_pe_config_addr = rets[0];
- }
+ pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info);
/* Some older systems (Power4) allow the
* ibm,set-eeh-option call to succeed even on nodes
@@ -889,6 +920,7 @@ void __init eeh_init(void)
ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
+ ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)