diff options
Diffstat (limited to 'arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c')
| -rw-r--r-- | arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c | 73 |
1 files changed, 24 insertions, 49 deletions
diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index d7a4fc7ca238..ed00ed2455dd 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -1,7 +1,7 @@ /* * mpc7448_hpc2.c * - * Board setup routines for the Freescale Taiga platform + * Board setup routines for the Freescale mpc7448hpc2(taiga) platform * * Author: Jacob Pan * jacob.pan@freescale.com @@ -12,10 +12,10 @@ * * Copyright 2004-2006 Freescale Semiconductor, Inc. * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. */ #include <linux/config.h> @@ -62,43 +62,8 @@ pci_dram_offset = MPC7448_HPC2_PCI_MEM_OFFSET; extern int tsi108_setup_pci(struct device_node *dev); extern void _nmask_and_or_msr(unsigned long nmask, unsigned long or_val); extern void tsi108_pci_int_init(void); -extern int tsi108_irq_cascade(struct pt_regs *regs, void *unused); - -/* - * Define all of the IRQ senses and polarities. Taken from the - * mpc7448hpc manual. - * Note: Likely, this table and the following function should be - * obtained and derived from the OF Device Tree. - */ - -static u_char mpc7448_hpc2_pic_initsenses[] __initdata = { - /* External on-board sources */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[0] XINT0 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[1] XINT1 from FPGA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[2] PHY_INT from both GIGE */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* INT[3] RESERVED */ - /* Internal Tsi108/109 interrupt sources */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA2 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* DMA3 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART0 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* UART1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* I2C */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* GPIO */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* GIGE1 */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* HLP */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* SDC */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Processor IF */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE), /* Reserved IRQ */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* PCI/X block */ -}; +extern void tsi108_irq_cascade(unsigned int irq, struct irq_desc *desc, + struct pt_regs *regs); int mpc7448_hpc2_exclude_device(u_char bus, u_char devfn) { @@ -229,6 +194,8 @@ static void __init mpc7448_hpc2_init_IRQ(void) { struct mpic *mpic; phys_addr_t mpic_paddr = 0; + unsigned int cascade_pci_irq; + struct device_node *tsi_pci; struct device_node *tsi_pic; tsi_pic = of_find_node_by_type(NULL, "open-pic"); @@ -246,24 +213,31 @@ static void __init mpc7448_hpc2_init_IRQ(void) DBG("%s: tsi108pic phys_addr = 0x%x\n", __FUNCTION__, (u32) mpic_paddr); - mpic = mpic_alloc(mpic_paddr, + mpic = mpic_alloc(tsi_pic, mpic_paddr, MPIC_PRIMARY | MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | MPIC_SPV_EOI | MPIC_MOD_ID(MPIC_ID_TSI108), 0, /* num_sources used */ - TSI108_IRQ_BASE, 0, /* num_sources used */ - NR_IRQS - 4 /* XXXX */, - mpc7448_hpc2_pic_initsenses, - sizeof(mpc7448_hpc2_pic_initsenses), "Tsi108_PIC"); + "Tsi108_PIC"); BUG_ON(mpic == NULL); /* XXXX */ - mpic_init(mpic); - mpic_setup_cascade(IRQ_TSI108_PCI, tsi108_irq_cascade, mpic); + + tsi_pci = of_find_node_by_type(NULL, "pci"); + if (tsi_pci == 0) { + printk("%s: No tsi108 pci node found !\n", __FUNCTION__); + return; + } + + cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0); + set_irq_data(cascade_pci_irq, mpic); + set_irq_chained_handler(cascade_pci_irq, tsi108_irq_cascade); + tsi108_pci_int_init(); /* Configure MPIC outputs to CPU0 */ tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0); + of_node_put(tsi_pic); } void mpc7448_hpc2_show_cpuinfo(struct seq_file *m) @@ -320,6 +294,7 @@ static int mpc7448_machine_check_exception(struct pt_regs *regs) return 0; } + define_machine(mpc7448_hpc2){ .name = "MPC7448 HPC2", .probe = mpc7448_hpc2_probe, |