summaryrefslogtreecommitdiff
path: root/arch/mips/pci
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/pci')
-rw-r--r--arch/mips/pci/Makefile7
-rw-r--r--arch/mips/pci/fixup-emma2rh.c84
-rw-r--r--arch/mips/pci/fixup-loongson3.c71
-rw-r--r--arch/mips/pci/fixup-pmcmsp.c216
-rw-r--r--arch/mips/pci/fixup-sni.c3
-rw-r--r--arch/mips/pci/ops-bcm63xx.c2
-rw-r--r--arch/mips/pci/ops-emma2rh.c167
-rw-r--r--arch/mips/pci/ops-loongson3.c116
-rw-r--r--arch/mips/pci/ops-nile4.c136
-rw-r--r--arch/mips/pci/ops-pmcmsp.c944
-rw-r--r--arch/mips/pci/pci-alchemy.c2
-rw-r--r--arch/mips/pci/pci-emma2rh.c72
-rw-r--r--arch/mips/pci/pci-lasat.c88
13 files changed, 3 insertions, 1905 deletions
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index 342ce10ef593..0f68d6849978 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -13,10 +13,8 @@ obj-$(CONFIG_PCI_DRIVERS_GENERIC)+= pci-generic.o
obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o
obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o
obj-$(CONFIG_MIPS_MSC) += ops-msc.o
-obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o
obj-$(CONFIG_SOC_TX3927) += ops-tx3927.o
obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o
-obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
@@ -31,15 +29,10 @@ obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o
# These are still pretty much in the old state, watch, go blind.
#
obj-$(CONFIG_ATH79) += fixup-ath79.o
-obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
-obj-$(CONFIG_MACH_LOONGSON64) += fixup-loongson3.o ops-loongson3.o
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o pci-malta.o
-obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
-obj-$(CONFIG_PMC_MSP7120_FPGA) += fixup-pmcmsp.o ops-pmcmsp.o
obj-$(CONFIG_SGI_IP27) += pci-ip27.o
obj-$(CONFIG_SGI_IP32) += fixup-ip32.o ops-mace.o pci-ip32.o
obj-$(CONFIG_SIBYTE_SB1250) += fixup-sb1250.o pci-sb1250.o
diff --git a/arch/mips/pci/fixup-emma2rh.c b/arch/mips/pci/fixup-emma2rh.c
deleted file mode 100644
index 2541f9bc12de..000000000000
--- a/arch/mips/pci/fixup-emma2rh.c
+++ /dev/null
@@ -1,84 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- *
- * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
- *
- * Copyright 2001 MontaVista Software Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/emma/emma2rh.h>
-
-#define EMMA2RH_PCI_HOST_SLOT 0x09
-#define EMMA2RH_USB_SLOT 0x03
-#define PCI_DEVICE_ID_NEC_EMMA2RH 0x014b /* EMMA2RH PCI Host */
-
-/*
- * we fix up irqs based on the slot number.
- * The first entry is at AD:11.
- * Fortunately this works because, although we have two pci buses,
- * they all have different slot numbers (except for rockhopper slot 20
- * which is handled below).
- *
- */
-
-#define MAX_SLOT_NUM 10
-static unsigned char irq_map[][5] = {
- [3] = {0, MARKEINS_PCI_IRQ_INTB, MARKEINS_PCI_IRQ_INTC,
- MARKEINS_PCI_IRQ_INTD, 0,},
- [4] = {0, MARKEINS_PCI_IRQ_INTA, 0, 0, 0,},
- [5] = {0, 0, 0, 0, 0,},
- [6] = {0, MARKEINS_PCI_IRQ_INTC, MARKEINS_PCI_IRQ_INTD,
- MARKEINS_PCI_IRQ_INTA, MARKEINS_PCI_IRQ_INTB,},
-};
-
-static void nec_usb_controller_fixup(struct pci_dev *dev)
-{
- if (PCI_SLOT(dev->devfn) == EMMA2RH_USB_SLOT)
- /* on board USB controller configuration */
- pci_write_config_dword(dev, 0xe4, 1 << 5);
-}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
- nec_usb_controller_fixup);
-
-/*
- * Prevent the PCI layer from seeing the resources allocated to this device
- * if it is the host bridge by marking it as such. These resources are of
- * no consequence to the PCI layer (they are handled elsewhere).
- */
-static void emma2rh_pci_host_fixup(struct pci_dev *dev)
-{
- int i;
-
- if (PCI_SLOT(dev->devfn) == EMMA2RH_PCI_HOST_SLOT) {
- dev->class &= 0xff;
- dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- dev->resource[i].start = 0;
- dev->resource[i].end = 0;
- dev->resource[i].flags = 0;
- }
- }
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_EMMA2RH,
- emma2rh_pci_host_fixup);
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- return irq_map[slot][pin];
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/fixup-loongson3.c b/arch/mips/pci/fixup-loongson3.c
deleted file mode 100644
index 8a741c2c6685..000000000000
--- a/arch/mips/pci/fixup-loongson3.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * fixup-loongson3.c
- *
- * Copyright (C) 2012 Lemote, Inc.
- * Author: Xiang Yu, xiangy@lemote.com
- * Chen Huacai, chenhc@lemote.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- */
-
-#include <linux/pci.h>
-#include <boot_param.h>
-
-static void print_fixup_info(const struct pci_dev *pdev)
-{
- dev_info(&pdev->dev, "Device %x:%x, irq %d\n",
- pdev->vendor, pdev->device, pdev->irq);
-}
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- print_fixup_info(dev);
- return dev->irq;
-}
-
-static void pci_fixup_radeon(struct pci_dev *pdev)
-{
- struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
-
- if (res->start)
- return;
-
- if (!loongson_sysconf.vgabios_addr)
- return;
-
- pci_disable_rom(pdev);
- if (res->parent)
- release_resource(res);
-
- res->start = virt_to_phys((void *) loongson_sysconf.vgabios_addr);
- res->end = res->start + 256*1024 - 1;
- res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
- IORESOURCE_PCI_FIXED;
-
- dev_info(&pdev->dev, "BAR %d: assigned %pR for Radeon ROM\n",
- PCI_ROM_RESOURCE, res);
-}
-
-DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID,
- PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_radeon);
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/fixup-pmcmsp.c b/arch/mips/pci/fixup-pmcmsp.c
deleted file mode 100644
index 4ad2ef02087b..000000000000
--- a/arch/mips/pci/fixup-pmcmsp.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * PMC-Sierra MSP board specific pci fixups.
- *
- * Copyright 2001 MontaVista Software Inc.
- * Copyright 2005-2007 PMC-Sierra, Inc
- *
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifdef CONFIG_PCI
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/byteorder.h>
-
-#include <msp_pci.h>
-#include <msp_cic_int.h>
-
-/* PCI interrupt pins */
-#define IRQ4 MSP_INT_EXT4
-#define IRQ5 MSP_INT_EXT5
-#define IRQ6 MSP_INT_EXT6
-
-#if defined(CONFIG_PMC_MSP7120_GW)
-/* Garibaldi Board IRQ wiring to PCI slots */
-static char irq_tab[][5] = {
- /* INTA INTB INTC INTD */
- {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
- {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
- {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
- {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
- {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
- {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
- {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
- {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
- {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
- {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
- {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
- {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
- {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
- {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
- {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
- {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
- {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
- {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
- {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
- {0, IRQ4, IRQ4, 0, 0 }, /* 18 (AD[28]): slot 0 */
- {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
- {0, IRQ5, IRQ5, 0, 0 }, /* 20 (AD[30]): slot 1 */
- {0, IRQ6, IRQ6, 0, 0 } /* 21 (AD[31]): slot 2 */
-};
-
-#elif defined(CONFIG_PMC_MSP7120_EVAL)
-
-/* MSP7120 Eval Board IRQ wiring to PCI slots */
-static char irq_tab[][5] = {
- /* INTA INTB INTC INTD */
- {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
- {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
- {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
- {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
- {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
- {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
- {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
- {0, IRQ6, IRQ6, 0, 0 }, /* 6 (AD[16]): slot 3 (mini) */
- {0, IRQ5, IRQ5, 0, 0 }, /* 7 (AD[17]): slot 2 (mini) */
- {0, IRQ4, IRQ4, IRQ4, IRQ4}, /* 8 (AD[18]): slot 0 (PCI) */
- {0, IRQ5, IRQ5, IRQ5, IRQ5}, /* 9 (AD[19]): slot 1 (PCI) */
- {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
- {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
- {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
- {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
- {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
- {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
- {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
- {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
- {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
- {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
- {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
- {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
-};
-
-#else
-
-/* Unknown board -- don't assign any IRQs */
-static char irq_tab[][5] = {
- /* INTA INTB INTC INTD */
- {0, 0, 0, 0, 0 }, /* (AD[0]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[1]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[2]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[3]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[4]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[5]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[6]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[7]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[8]): Unused */
- {0, 0, 0, 0, 0 }, /* (AD[9]): Unused */
- {0, 0, 0, 0, 0 }, /* 0 (AD[10]): Unused */
- {0, 0, 0, 0, 0 }, /* 1 (AD[11]): Unused */
- {0, 0, 0, 0, 0 }, /* 2 (AD[12]): Unused */
- {0, 0, 0, 0, 0 }, /* 3 (AD[13]): Unused */
- {0, 0, 0, 0, 0 }, /* 4 (AD[14]): Unused */
- {0, 0, 0, 0, 0 }, /* 5 (AD[15]): Unused */
- {0, 0, 0, 0, 0 }, /* 6 (AD[16]): Unused */
- {0, 0, 0, 0, 0 }, /* 7 (AD[17]): Unused */
- {0, 0, 0, 0, 0 }, /* 8 (AD[18]): Unused */
- {0, 0, 0, 0, 0 }, /* 9 (AD[19]): Unused */
- {0, 0, 0, 0, 0 }, /* 10 (AD[20]): Unused */
- {0, 0, 0, 0, 0 }, /* 11 (AD[21]): Unused */
- {0, 0, 0, 0, 0 }, /* 12 (AD[22]): Unused */
- {0, 0, 0, 0, 0 }, /* 13 (AD[23]): Unused */
- {0, 0, 0, 0, 0 }, /* 14 (AD[24]): Unused */
- {0, 0, 0, 0, 0 }, /* 15 (AD[25]): Unused */
- {0, 0, 0, 0, 0 }, /* 16 (AD[26]): Unused */
- {0, 0, 0, 0, 0 }, /* 17 (AD[27]): Unused */
- {0, 0, 0, 0, 0 }, /* 18 (AD[28]): Unused */
- {0, 0, 0, 0, 0 }, /* 19 (AD[29]): Unused */
- {0, 0, 0, 0, 0 }, /* 20 (AD[30]): Unused */
- {0, 0, 0, 0, 0 } /* 21 (AD[31]): Unused */
-};
-#endif
-
-/*****************************************************************************
- *
- * FUNCTION: pcibios_plat_dev_init
- * _________________________________________________________________________
- *
- * DESCRIPTION: Perform platform specific device initialization at
- * pci_enable_device() time.
- * None are needed for the MSP7120 PCI Controller.
- *
- * INPUTS: dev - structure describing the PCI device
- *
- * OUTPUTS: none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL
- *
- ****************************************************************************/
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: pcibios_map_irq
- * _________________________________________________________________________
- *
- * DESCRIPTION: Perform board supplied PCI IRQ mapping routine.
- *
- * INPUTS: dev - unused
- * slot - PCI slot. Identified by which bit of the AD[] bus
- * drives the IDSEL line. AD[10] is 0, AD[31] is
- * slot 21.
- * pin - numbered using the scheme of the PCI_INTERRUPT_PIN
- * field of the config header.
- *
- * OUTPUTS: none
- *
- * RETURNS: IRQ number
- *
- ****************************************************************************/
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-#if !defined(CONFIG_PMC_MSP7120_GW) && !defined(CONFIG_PMC_MSP7120_EVAL)
- printk(KERN_WARNING "PCI: unknown board, no PCI IRQs assigned.\n");
-#endif
- printk(KERN_WARNING "PCI: irq_tab returned %d for slot=%d pin=%d\n",
- irq_tab[slot][pin], slot, pin);
-
- return irq_tab[slot][pin];
-}
-
-#endif /* CONFIG_PCI */
diff --git a/arch/mips/pci/fixup-sni.c b/arch/mips/pci/fixup-sni.c
index adb9a58641e8..de012f8bd8c3 100644
--- a/arch/mips/pci/fixup-sni.c
+++ b/arch/mips/pci/fixup-sni.c
@@ -151,8 +151,7 @@ int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
case SNI_BRD_PCI_MTOWER:
if (is_rm300_revd())
return irq_tab_rm300d[slot][pin];
- /* fall through */
-
+ fallthrough;
case SNI_BRD_PCI_DESKTOP:
return irq_tab_rm200[slot][pin];
diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c
index 925c72348fb6..dc6dc2741272 100644
--- a/arch/mips/pci/ops-bcm63xx.c
+++ b/arch/mips/pci/ops-bcm63xx.c
@@ -474,7 +474,7 @@ static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
if (PCI_SLOT(devfn) == 0)
return bcm_pcie_readl(PCIE_DLSTATUS_REG)
& DLSTATUS_PHYLINKUP;
- /* else, fall through */
+ fallthrough;
default:
return false;
}
diff --git a/arch/mips/pci/ops-emma2rh.c b/arch/mips/pci/ops-emma2rh.c
deleted file mode 100644
index 65f47344536c..000000000000
--- a/arch/mips/pci/ops-emma2rh.c
+++ /dev/null
@@ -1,167 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- *
- * This file is based on the arch/mips/pci/ops-vr41xx.c
- *
- * Copyright 2001 MontaVista Software Inc.
- */
-
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-
-#include <asm/addrspace.h>
-
-#include <asm/emma/emma2rh.h>
-
-#define RTABORT (0x1<<9)
-#define RMABORT (0x1<<10)
-#define EMMA2RH_PCI_SLOT_NUM 9 /* 0000:09.0 is final PCI device */
-
-/*
- * access config space
- */
-
-static int check_args(struct pci_bus *bus, u32 devfn, u32 * bus_num)
-{
- /* check if the bus is top-level */
- if (bus->parent != NULL)
- *bus_num = bus->number;
- else
- *bus_num = 0;
-
- if (*bus_num == 0) {
- /* Type 0 */
- if (PCI_SLOT(devfn) >= 10)
- return PCIBIOS_DEVICE_NOT_FOUND;
- } else {
- /* Type 1 */
- if ((*bus_num >= 64) || (PCI_SLOT(devfn) >= 16))
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- return 0;
-}
-
-static inline int set_pci_configuration_address(unsigned char bus_num,
- unsigned int devfn, int where)
-{
- u32 config_win0;
-
- emma2rh_out32(EMMA2RH_PCI_INT, ~RMABORT);
- if (bus_num == 0)
- /*
- * Type 0 configuration
- */
- config_win0 = (1 << (22 + PCI_SLOT(devfn))) | (5 << 9);
- else
- /*
- * Type 1 configuration
- */
- config_win0 = (bus_num << 26) | (PCI_SLOT(devfn) << 22) |
- (1 << 15) | (5 << 9);
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, config_win0);
-
- return 0;
-}
-
-static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, uint32_t * val)
-{
- u32 bus_num;
- u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE);
- u32 backup_win0;
- u32 data;
-
- *val = 0xffffffffU;
-
- if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR);
-
- if (set_pci_configuration_address(bus_num, devfn, where) < 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- data =
- *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) +
- (where & 0xfffffffc));
-
- switch (size) {
- case 1:
- *val = (data >> ((where & 3) << 3)) & 0xffU;
- break;
- case 2:
- *val = (data >> ((where & 2) << 3)) & 0xffffU;
- break;
- case 4:
- *val = data;
- break;
- default:
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
-
- if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- u32 bus_num;
- u32 base = KSEG1ADDR(EMMA2RH_PCI_CONFIG_BASE);
- u32 backup_win0;
- u32 data;
- int shift;
-
- if (check_args(bus, devfn, &bus_num) == PCIBIOS_DEVICE_NOT_FOUND)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- backup_win0 = emma2rh_in32(EMMA2RH_PCI_IWIN0_CTR);
-
- if (set_pci_configuration_address(bus_num, devfn, where) < 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- /* read modify write */
- data =
- *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) +
- (where & 0xfffffffc));
-
- switch (size) {
- case 1:
- shift = (where & 3) << 3;
- data &= ~(0xffU << shift);
- data |= ((val & 0xffU) << shift);
- break;
- case 2:
- shift = (where & 2) << 3;
- data &= ~(0xffffU << shift);
- data |= ((val & 0xffffU) << shift);
- break;
- case 4:
- data = val;
- break;
- default:
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
- return PCIBIOS_FUNC_NOT_SUPPORTED;
- }
- *(volatile u32 *)(base + (PCI_FUNC(devfn) << 8) +
- (where & 0xfffffffc)) = data;
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, backup_win0);
- if (emma2rh_in32(EMMA2RH_PCI_INT) & RMABORT)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops emma2rh_pci_ops = {
- .read = pci_config_read,
- .write = pci_config_write,
-};
diff --git a/arch/mips/pci/ops-loongson3.c b/arch/mips/pci/ops-loongson3.c
deleted file mode 100644
index 2f6ad36bdea6..000000000000
--- a/arch/mips/pci/ops-loongson3.c
+++ /dev/null
@@ -1,116 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-
-#include <asm/mips-boards/bonito64.h>
-
-#include <loongson.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#define HT1LO_PCICFG_BASE 0x1a000000
-#define HT1LO_PCICFG_BASE_TP1 0x1b000000
-
-static int loongson3_pci_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn,
- int where, u32 *data)
-{
- unsigned char busnum = bus->number;
- int function = PCI_FUNC(devfn);
- int device = PCI_SLOT(devfn);
- int reg = where & ~3;
- void *addrp;
- u64 addr;
-
- if (where < PCI_CFG_SPACE_SIZE) { /* standard config */
- addr = (busnum << 16) | (device << 11) | (function << 8) | reg;
- if (busnum == 0) {
- if (device > 31)
- return PCIBIOS_DEVICE_NOT_FOUND;
- addrp = (void *)TO_UNCAC(HT1LO_PCICFG_BASE | addr);
- } else {
- addrp = (void *)TO_UNCAC(HT1LO_PCICFG_BASE_TP1 | addr);
- }
- } else if (where < PCI_CFG_SPACE_EXP_SIZE) { /* extended config */
- struct pci_dev *rootdev;
-
- rootdev = pci_get_domain_bus_and_slot(0, 0, 0);
- if (!rootdev)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr = pci_resource_start(rootdev, 3);
- if (!addr)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- addr |= busnum << 20 | device << 15 | function << 12 | reg;
- addrp = (void *)TO_UNCAC(addr);
- } else {
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
-
- if (access_type == PCI_ACCESS_WRITE)
- writel(*data, addrp);
- else {
- *data = readl(addrp);
- if (*data == 0xffffffff) {
- *data = -1;
- return PCIBIOS_DEVICE_NOT_FOUND;
- }
- }
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int loongson3_pci_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- u32 data = 0;
- int ret = loongson3_pci_config_access(PCI_ACCESS_READ,
- bus, devfn, where, &data);
-
- if (ret != PCIBIOS_SUCCESSFUL)
- return ret;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int loongson3_pci_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data = 0;
- int ret;
-
- if (size == 4)
- data = val;
- else {
- ret = loongson3_pci_config_access(PCI_ACCESS_READ,
- bus, devfn, where, &data);
- if (ret != PCIBIOS_SUCCESSFUL)
- return ret;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- }
-
- ret = loongson3_pci_config_access(PCI_ACCESS_WRITE,
- bus, devfn, where, &data);
-
- return ret;
-}
-
-struct pci_ops loongson_pci_ops = {
- .read = loongson3_pci_pcibios_read,
- .write = loongson3_pci_pcibios_write
-};
diff --git a/arch/mips/pci/ops-nile4.c b/arch/mips/pci/ops-nile4.c
deleted file mode 100644
index b00658d19116..000000000000
--- a/arch/mips/pci/ops-nile4.c
+++ /dev/null
@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <asm/bootinfo.h>
-
-#include <asm/lasat/lasat.h>
-#include <asm/nile4.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#define LO(reg) (reg / 4)
-#define HI(reg) (reg / 4 + 1)
-
-volatile unsigned long *const vrc_pciregs = (void *) Vrc5074_BASE;
-
-static int nile4_pcibios_config_access(unsigned char access_type,
- struct pci_bus *bus, unsigned int devfn, int where, u32 *val)
-{
- unsigned char busnum = bus->number;
- u32 adr, mask, err;
-
- if ((busnum == 0) && (PCI_SLOT(devfn) > 8))
- /* The addressing scheme chosen leaves room for just
- * 8 devices on the first busnum (besides the PCI
- * controller itself) */
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- if ((busnum == 0) && (devfn == PCI_DEVFN(0, 0))) {
- /* Access controller registers directly */
- if (access_type == PCI_ACCESS_WRITE) {
- vrc_pciregs[(0x200 + where) >> 2] = *val;
- } else {
- *val = vrc_pciregs[(0x200 + where) >> 2];
- }
- return PCIBIOS_SUCCESSFUL;
- }
-
- /* Temporarily map PCI Window 1 to config space */
- mask = vrc_pciregs[LO(NILE4_PCIINIT1)];
- vrc_pciregs[LO(NILE4_PCIINIT1)] = 0x0000001a | (busnum ? 0x200 : 0);
-
- /* Clear PCI Error register. This also clears the Error Type
- * bits in the Control register */
- vrc_pciregs[LO(NILE4_PCIERR)] = 0;
- vrc_pciregs[HI(NILE4_PCIERR)] = 0;
-
- /* Setup address */
- if (busnum == 0)
- adr =
- KSEG1ADDR(PCI_WINDOW1) +
- ((1 << (PCI_SLOT(devfn) + 15)) | (PCI_FUNC(devfn) << 8)
- | (where & ~3));
- else
- adr = KSEG1ADDR(PCI_WINDOW1) | (busnum << 16) | (devfn << 8) |
- (where & ~3);
-
- if (access_type == PCI_ACCESS_WRITE)
- *(u32 *) adr = *val;
- else
- *val = *(u32 *) adr;
-
- /* Check for master or target abort */
- err = (vrc_pciregs[HI(NILE4_PCICTRL)] >> 5) & 0x7;
-
- /* Restore PCI Window 1 */
- vrc_pciregs[LO(NILE4_PCIINIT1)] = mask;
-
- if (err)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int nile4_pcibios_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 *val)
-{
- u32 data = 0;
- int err;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data);
- if (err)
- return err;
-
- if (size == 1)
- *val = (data >> ((where & 3) << 3)) & 0xff;
- else if (size == 2)
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- else
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int nile4_pcibios_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- u32 data = 0;
- int err;
-
- if ((size == 2) && (where & 1))
- return PCIBIOS_BAD_REGISTER_NUMBER;
- else if ((size == 4) && (where & 3))
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- err = nile4_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where,
- &data);
- if (err)
- return err;
-
- if (size == 1)
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else if (size == 2)
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
- else
- data = val;
-
- if (nile4_pcibios_config_access
- (PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops nile4_pci_ops = {
- .read = nile4_pcibios_read,
- .write = nile4_pcibios_write,
-};
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
deleted file mode 100644
index ad5dd711c575..000000000000
--- a/arch/mips/pci/ops-pmcmsp.c
+++ /dev/null
@@ -1,944 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * PMC-Sierra MSP board specific pci_ops
- *
- * Copyright 2001 MontaVista Software Inc.
- * Copyright 2005-2007 PMC-Sierra, Inc
- *
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Much of the code is derived from the original DDB5074 port by
- * Geert Uytterhoeven <geert@linux-m68k.org>
- */
-
-#define PCI_COUNTERS 1
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-
-#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/byteorder.h>
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
-#include <asm/mipsmtregs.h>
-#endif
-
-#include <msp_prom.h>
-#include <msp_cic_int.h>
-#include <msp_pci.h>
-#include <msp_regs.h>
-#include <msp_regops.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
-static char proc_init;
-extern struct proc_dir_entry *proc_bus_pci_dir;
-unsigned int pci_int_count[32];
-
-static void pci_proc_init(void);
-
-/*****************************************************************************
- *
- * FUNCTION: show_msp_pci_counts
- * _________________________________________________________________________
- *
- * DESCRIPTION: Prints the count of how many times each PCI
- * interrupt has asserted. Can be invoked by the
- * /proc filesystem.
- *
- * INPUTS: m - synthetic file construction data
- * v - iterator
- *
- * RETURNS: 0 or error
- *
- ****************************************************************************/
-static int show_msp_pci_counts(struct seq_file *m, void *v)
-{
- int i;
- unsigned int intcount, total = 0;
-
- for (i = 0; i < 32; ++i) {
- intcount = pci_int_count[i];
- if (intcount != 0) {
- seq_printf(m, "[%d] = %u\n", i, intcount);
- total += intcount;
- }
- }
-
- seq_printf(m, "total = %u\n", total);
- return 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: gen_pci_cfg_wr_show
- * _________________________________________________________________________
- *
- * DESCRIPTION: Generates a configuration write cycle for debug purposes.
- * The IDSEL line asserted and location and data written are
- * immaterial. Just want to be able to prove that a
- * configuration write can be correctly generated on the
- * PCI bus. Intent is that this function by invocable from
- * the /proc filesystem.
- *
- * INPUTS: m - synthetic file construction data
- * v - iterator
- *
- * RETURNS: 0 or error
- *
- ****************************************************************************/
-static int gen_pci_cfg_wr_show(struct seq_file *m, void *v)
-{
- unsigned char where = 0; /* Write to static Device/Vendor ID */
- unsigned char bus_num = 0; /* Bus 0 */
- unsigned char dev_fn = 0xF; /* Arbitrary device number */
- u32 wr_data = 0xFF00AA00; /* Arbitrary data */
- struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
- unsigned long value;
- int intr;
-
- seq_puts(m, "PMC MSP PCI: Beginning\n");
-
- if (proc_init == 0) {
- pci_proc_init();
- proc_init = ~0;
- }
-
- seq_puts(m, "PMC MSP PCI: Before Cfg Wr\n");
-
- /*
- * Generate PCI Configuration Write Cycle
- */
-
- /* Clear cause register bits */
- preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
-
- /* Setup address that is to appear on PCI bus */
- preg->config_addr = BPCI_CFGADDR_ENABLE |
- (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
- (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
- (where & 0xFC);
-
- value = cpu_to_le32(wr_data);
-
- /* Launch the PCI configuration write cycle */
- *PCI_CONFIG_SPACE_REG = value;
-
- /*
- * Check if the PCI configuration cycle (rd or wr) succeeded, by
- * checking the status bits for errors like master or target abort.
- */
- intr = preg->if_status;
-
- seq_puts(m, "PMC MSP PCI: After Cfg Wr\n");
- return 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: pci_proc_init
- * _________________________________________________________________________
- *
- * DESCRIPTION: Create entries in the /proc filesystem for debug access.
- *
- * INPUTS: none
- *
- * OUTPUTS: none
- *
- * RETURNS: none
- *
- ****************************************************************************/
-static void pci_proc_init(void)
-{
- proc_create_single("pmc_msp_pci_rd_cnt", 0, NULL, show_msp_pci_counts);
- proc_create_single("pmc_msp_pci_cfg_wr", 0, NULL, gen_pci_cfg_wr_show);
-}
-#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
-
-/*****************************************************************************
- *
- * STRUCT: pci_io_resource
- * _________________________________________________________________________
- *
- * DESCRIPTION: Defines the address range that pciauto() will use to
- * assign to the I/O BARs of PCI devices.
- *
- * Use the start and end addresses of the MSP7120 PCI Host
- * Controller I/O space, in the form that they appear on the
- * PCI bus AFTER MSP7120 has performed address translation.
- *
- * For I/O accesses, MSP7120 ignores OATRAN and maps I/O
- * accesses into the bottom 0xFFF region of address space,
- * so that is the range to put into the pci_io_resource
- * struct.
- *
- * In MSP4200, the start address was 0x04 instead of the
- * expected 0x00. Will just assume there was a good reason
- * for this!
- *
- * NOTES: Linux, by default, will assign I/O space to the lowest
- * region of address space. Since MSP7120 and Linux,
- * by default, have no offset in between how they map, the
- * io_offset element of pci_controller struct should be set
- * to zero.
- * ELEMENTS:
- * name - String used for a meaningful name.
- *
- * start - Start address of MSP7120's I/O space, as MSP7120 presents
- * the address on the PCI bus.
- *
- * end - End address of MSP7120's I/O space, as MSP7120 presents
- * the address on the PCI bus.
- *
- * flags - Attributes indicating the type of resource. In this case,
- * indicate I/O space.
- *
- ****************************************************************************/
-static struct resource pci_io_resource = {
- .name = "pci IO space",
- .start = 0x04,
- .end = 0x0FFF,
- .flags = IORESOURCE_IO /* I/O space */
-};
-
-/*****************************************************************************
- *
- * STRUCT: pci_mem_resource
- * _________________________________________________________________________
- *
- * DESCRIPTION: Defines the address range that pciauto() will use to
- * assign to the memory BARs of PCI devices.
- *
- * The .start and .end values are dependent upon how address
- * translation is performed by the OATRAN regiser.
- *
- * The values to use for .start and .end are the values
- * in the form they appear on the PCI bus AFTER MSP7120 has
- * performed OATRAN address translation.
- *
- * ELEMENTS:
- * name - String used for a meaningful name.
- *
- * start - Start address of MSP7120's memory space, as MSP7120 presents
- * the address on the PCI bus.
- *
- * end - End address of MSP7120's memory space, as MSP7120 presents
- * the address on the PCI bus.
- *
- * flags - Attributes indicating the type of resource. In this case,
- * indicate memory space.
- *
- ****************************************************************************/
-static struct resource pci_mem_resource = {
- .name = "pci memory space",
- .start = MSP_PCI_SPACE_BASE,
- .end = MSP_PCI_SPACE_END,
- .flags = IORESOURCE_MEM /* memory space */
-};
-
-/*****************************************************************************
- *
- * FUNCTION: bpci_interrupt
- * _________________________________________________________________________
- *
- * DESCRIPTION: PCI status interrupt handler. Updates the count of how
- * many times each status bit has been set, then clears
- * the status bits. If the appropriate macros are defined,
- * these counts can be viewed via the /proc filesystem.
- *
- * INPUTS: irq - unused
- * dev_id - unused
- * pt_regs - unused
- *
- * OUTPUTS: none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- *
- ****************************************************************************/
-static irqreturn_t bpci_interrupt(int irq, void *dev_id)
-{
- struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
- unsigned int stat = preg->if_status;
-
-#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
- int i;
- for (i = 0; i < 32; ++i) {
- if ((1 << i) & stat)
- ++pci_int_count[i];
- }
-#endif /* PROC_FS && PCI_COUNTERS */
-
- /* printk("PCI ISR: Status=%08X\n", stat); */
-
- /* write to clear all asserted interrupts */
- preg->if_status = stat;
-
- return IRQ_HANDLED;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_config_access
- * _________________________________________________________________________
- *
- * DESCRIPTION: Performs a PCI configuration access (rd or wr), then
- * checks that the access succeeded by querying MSP7120's
- * PCI status bits.
- *
- * INPUTS:
- * access_type - kind of PCI configuration cycle to perform
- * (read or write). Legal values are
- * PCI_ACCESS_WRITE and PCI_ACCESS_READ.
- *
- * bus - pointer to the bus number of the device to
- * be targeted for the configuration cycle.
- * The only element of the pci_bus structure
- * used is bus->number. This argument determines
- * if the configuration access will be Type 0 or
- * Type 1. Since MSP7120 assumes itself to be the
- * PCI Host, any non-zero bus->number generates
- * a Type 1 access.
- *
- * devfn - this is an 8-bit field. The lower three bits
- * specify the function number of the device to
- * be targeted for the configuration cycle, with
- * all three-bit combinations being legal. The
- * upper five bits specify the device number,
- * with legal values being 10 to 31.
- *
- * where - address within the Configuration Header
- * space to access.
- *
- * data - for write accesses, contains the data to
- * write.
- *
- * OUTPUTS:
- * data - for read accesses, contains the value read.
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - access failure
- *
- ****************************************************************************/
-int msp_pcibios_config_access(unsigned char access_type,
- struct pci_bus *bus,
- unsigned int devfn,
- unsigned char where,
- u32 *data)
-{
- struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
- unsigned char bus_num = bus->number;
- unsigned char dev_fn = (unsigned char)devfn;
- unsigned long intr;
- unsigned long value;
- static char pciirqflag;
- int ret;
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
- unsigned int vpe_status;
-#endif
-
-#if defined(CONFIG_PROC_FS) && defined(PCI_COUNTERS)
- if (proc_init == 0) {
- pci_proc_init();
- proc_init = ~0;
- }
-#endif /* CONFIG_PROC_FS && PCI_COUNTERS */
-
- /*
- * Just the first time this function invokes, allocate
- * an interrupt line for PCI host status interrupts. The
- * allocation assigns an interrupt handler to the interrupt.
- */
- if (pciirqflag == 0) {
- ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
- bpci_interrupt,
- IRQF_SHARED,
- "PMC MSP PCI Host",
- preg);
- if (ret != 0)
- return ret;
- pciirqflag = ~0;
- }
-
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
- vpe_status = dvpe();
-#endif
-
- /*
- * Clear PCI cause register bits.
- *
- * In Polo, the PCI Host had a dedicated DMA called the
- * Block Copy (not to be confused with the general purpose Block
- * Copy Engine block). There appear to have been special interrupts
- * for this Block Copy, called Block Copy 0 Fault (BC0F) and
- * Block Copy 1 Fault (BC1F). MSP4200 and MSP7120 don't have this
- * dedicated Block Copy block, so these two interrupts are now
- * marked reserved. In case the Block Copy is resurrected in a
- * future design, maintain the code that treats these two interrupts
- * specially.
- *
- * Write to clear all interrupts in the PCI status register, aside
- * from BC0F and BC1F.
- */
- preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
-
- /* Setup address that is to appear on PCI bus */
- preg->config_addr = BPCI_CFGADDR_ENABLE |
- (bus_num << BPCI_CFGADDR_BUSNUM_SHF) |
- (dev_fn << BPCI_CFGADDR_FUNCTNUM_SHF) |
- (where & 0xFC);
-
- /* IF access is a PCI configuration write */
- if (access_type == PCI_ACCESS_WRITE) {
- value = cpu_to_le32(*data);
- *PCI_CONFIG_SPACE_REG = value;
- } else {
- /* ELSE access is a PCI configuration read */
- value = le32_to_cpu(*PCI_CONFIG_SPACE_REG);
- *data = value;
- }
-
- /*
- * Check if the PCI configuration cycle (rd or wr) succeeded, by
- * checking the status bits for errors like master or target abort.
- */
- intr = preg->if_status;
-
- /* Clear config access */
- preg->config_addr = 0;
-
- /* IF error occurred */
- if (intr & ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F)) {
- /* Clear status bits */
- preg->if_status = ~(BPCI_IFSTATUS_BC0F | BPCI_IFSTATUS_BC1F);
-
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
- evpe(vpe_status);
-#endif
-
- return -1;
- }
-
-#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
- evpe(vpe_status);
-#endif
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_read_config_byte
- * _________________________________________________________________________
- *
- * DESCRIPTION: Read a byte from PCI configuration address spac
- * Since the hardware can't address 8 bit chunks
- * directly, read a 32-bit chunk, then mask off extraneous
- * bits.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the read is destined for.
- * devfn - device/function combination that the read is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- *
- * OUTPUTS val - read data
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - read access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_read_config_byte(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u32 *val)
-{
- u32 data = 0;
-
- /*
- * If the config access did not complete normally (e.g., underwent
- * master abort) do the PCI compliant thing, which is to supply an
- * all ones value.
- */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data)) {
- *val = 0xFFFFFFFF;
- return -1;
- }
-
- *val = (data >> ((where & 3) << 3)) & 0x0ff;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_read_config_word
- * _________________________________________________________________________
- *
- * DESCRIPTION: Read a word (16 bits) from PCI configuration address space.
- * Since the hardware can't address 16 bit chunks
- * directly, read a 32-bit chunk, then mask off extraneous
- * bits.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the read is destined for.
- * devfn - device/function combination that the read is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- *
- * OUTPUTS val - read data
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
- * -1 - read access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_read_config_word(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u32 *val)
-{
- u32 data = 0;
-
- /* if (where & 1) */ /* Commented out non-compliant code.
- * Should allow word access to configuration
- * registers, with only exception being when
- * the word access would wrap around into
- * the next dword.
- */
- if ((where & 3) == 3) {
- *val = 0xFFFFFFFF;
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
- /*
- * If the config access did not complete normally (e.g., underwent
- * master abort) do the PCI compliant thing, which is to supply an
- * all ones value.
- */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data)) {
- *val = 0xFFFFFFFF;
- return -1;
- }
-
- *val = (data >> ((where & 3) << 3)) & 0x0ffff;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_read_config_dword
- * _________________________________________________________________________
- *
- * DESCRIPTION: Read a double word (32 bits) from PCI configuration
- * address space.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the read is destined for.
- * devfn - device/function combination that the read is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- *
- * OUTPUTS val - read data
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
- * -1 - read access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_read_config_dword(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u32 *val)
-{
- u32 data = 0;
-
- /* Address must be dword aligned. */
- if (where & 3) {
- *val = 0xFFFFFFFF;
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
- /*
- * If the config access did not complete normally (e.g., underwent
- * master abort) do the PCI compliant thing, which is to supply an
- * all ones value.
- */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data)) {
- *val = 0xFFFFFFFF;
- return -1;
- }
-
- *val = data;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_write_config_byte
- * _________________________________________________________________________
- *
- * DESCRIPTION: Write a byte to PCI configuration address space.
- * Since the hardware can't address 8 bit chunks
- * directly, a read-modify-write is performed.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * val - value to write
- *
- * OUTPUTS none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - write access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_write_config_byte(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u8 val)
-{
- u32 data = 0;
-
- /* read config space */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data))
- return -1;
-
- /* modify the byte within the dword */
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- /* write back the full dword */
- if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
- where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_write_config_word
- * _________________________________________________________________________
- *
- * DESCRIPTION: Write a word (16-bits) to PCI configuration address space.
- * Since the hardware can't address 16 bit chunks
- * directly, a read-modify-write is performed.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * val - value to write
- *
- * OUTPUTS none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
- * -1 - write access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_write_config_word(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u16 val)
-{
- u32 data = 0;
-
- /* Fixed non-compliance: if (where & 1) */
- if ((where & 3) == 3)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- /* read config space */
- if (msp_pcibios_config_access(PCI_ACCESS_READ, bus, devfn,
- where, &data))
- return -1;
-
- /* modify the word within the dword */
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- /* write back the full dword */
- if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
- where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_write_config_dword
- * _________________________________________________________________________
- *
- * DESCRIPTION: Write a double word (32-bits) to PCI configuration address
- * space.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * val - value to write
- *
- * OUTPUTS none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * PCIBIOS_BAD_REGISTER_NUMBER - bad register address
- * -1 - write access failure
- *
- ****************************************************************************/
-static int
-msp_pcibios_write_config_dword(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- u32 val)
-{
- /* check that address is dword aligned */
- if (where & 3)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- /* perform write */
- if (msp_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn,
- where, &val))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_read_config
- * _________________________________________________________________________
- *
- * DESCRIPTION: Interface the PCI configuration read request with
- * the appropriate function, based on how many bytes
- * the read request is.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * size - in units of bytes, should be 1, 2, or 4.
- *
- * OUTPUTS val - value read, with any extraneous bytes masked
- * to zero.
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - failure
- *
- ****************************************************************************/
-int
-msp_pcibios_read_config(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- int size,
- u32 *val)
-{
- if (size == 1) {
- if (msp_pcibios_read_config_byte(bus, devfn, where, val)) {
- return -1;
- }
- } else if (size == 2) {
- if (msp_pcibios_read_config_word(bus, devfn, where, val)) {
- return -1;
- }
- } else if (size == 4) {
- if (msp_pcibios_read_config_dword(bus, devfn, where, val)) {
- return -1;
- }
- } else {
- *val = 0xFFFFFFFF;
- return -1;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pcibios_write_config
- * _________________________________________________________________________
- *
- * DESCRIPTION: Interface the PCI configuration write request with
- * the appropriate function, based on how many bytes
- * the read request is.
- *
- * INPUTS bus - structure containing attributes for the PCI bus
- * that the write is destined for.
- * devfn - device/function combination that the write is
- * destined for.
- * where - register within the Configuration Header space
- * to access.
- * size - in units of bytes, should be 1, 2, or 4.
- * val - value to write
- *
- * OUTPUTS: none
- *
- * RETURNS: PCIBIOS_SUCCESSFUL - success
- * -1 - failure
- *
- ****************************************************************************/
-int
-msp_pcibios_write_config(struct pci_bus *bus,
- unsigned int devfn,
- int where,
- int size,
- u32 val)
-{
- if (size == 1) {
- if (msp_pcibios_write_config_byte(bus, devfn,
- where, (u8)(0xFF & val))) {
- return -1;
- }
- } else if (size == 2) {
- if (msp_pcibios_write_config_word(bus, devfn,
- where, (u16)(0xFFFF & val))) {
- return -1;
- }
- } else if (size == 4) {
- if (msp_pcibios_write_config_dword(bus, devfn, where, val)) {
- return -1;
- }
- } else {
- return -1;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-/*****************************************************************************
- *
- * STRUCTURE: msp_pci_ops
- * _________________________________________________________________________
- *
- * DESCRIPTION: structure to abstract the hardware specific PCI
- * configuration accesses.
- *
- * ELEMENTS:
- * read - function for Linux to generate PCI Configuration reads.
- * write - function for Linux to generate PCI Configuration writes.
- *
- ****************************************************************************/
-struct pci_ops msp_pci_ops = {
- .read = msp_pcibios_read_config,
- .write = msp_pcibios_write_config
-};
-
-/*****************************************************************************
- *
- * STRUCTURE: msp_pci_controller
- * _________________________________________________________________________
- *
- * Describes the attributes of the MSP7120 PCI Host Controller
- *
- * ELEMENTS:
- * pci_ops - abstracts the hardware specific PCI configuration
- * accesses.
- *
- * mem_resource - address range pciauto() uses to assign to PCI device
- * memory BARs.
- *
- * mem_offset - offset between how MSP7120 outbound PCI memory
- * transaction addresses appear on the PCI bus and how Linux
- * wants to configure memory BARs of the PCI devices.
- * MSP7120 does nothing funky, so just set to zero.
- *
- * io_resource - address range pciauto() uses to assign to PCI device
- * I/O BARs.
- *
- * io_offset - offset between how MSP7120 outbound PCI I/O
- * transaction addresses appear on the PCI bus and how
- * Linux defaults to configure I/O BARs of the PCI devices.
- * MSP7120 maps outbound I/O accesses into the bottom
- * bottom 4K of PCI address space (and ignores OATRAN).
- * Since the Linux default is to configure I/O BARs to the
- * bottom 4K, no special offset is needed. Just set to zero.
- *
- ****************************************************************************/
-static struct pci_controller msp_pci_controller = {
- .pci_ops = &msp_pci_ops,
- .mem_resource = &pci_mem_resource,
- .mem_offset = 0,
- .io_map_base = MSP_PCI_IOSPACE_BASE,
- .io_resource = &pci_io_resource,
- .io_offset = 0
-};
-
-/*****************************************************************************
- *
- * FUNCTION: msp_pci_init
- * _________________________________________________________________________
- *
- * DESCRIPTION: Initialize the PCI Host Controller and register it with
- * Linux so Linux can seize control of the PCI bus.
- *
- ****************************************************************************/
-void __init msp_pci_init(void)
-{
- struct msp_pci_regs *preg = (void *)PCI_BASE_REG;
- u32 id;
-
- /* Extract Device ID */
- id = read_reg32(PCI_JTAG_DEVID_REG, 0xFFFF) >> 12;
-
- /* Check if JTAG ID identifies MSP7120 */
- if (!MSP_HAS_PCI(id)) {
- printk(KERN_WARNING "PCI: No PCI; id reads as %x\n", id);
- goto no_pci;
- }
-
- /*
- * Enable flushing of the PCI-SDRAM queue upon a read
- * of the SDRAM's Memory Configuration Register.
- */
- *(unsigned long *)QFLUSH_REG_1 = 3;
-
- /* Configure PCI Host Controller. */
- preg->if_status = ~0; /* Clear cause register bits */
- preg->config_addr = 0; /* Clear config access */
- preg->oatran = MSP_PCI_OATRAN; /* PCI outbound addr translation */
- preg->if_mask = 0xF8BF87C0; /* Enable all PCI status interrupts */
-
- /* configure so inb(), outb(), and family are functional */
- set_io_port_base(MSP_PCI_IOSPACE_BASE);
-
- /* Tell Linux the details of the MSP7120 PCI Host Controller */
- register_pci_controller(&msp_pci_controller);
-
- return;
-
-no_pci:
- /* Disable PCI channel */
- printk(KERN_WARNING "PCI: no host PCI bus detected\n");
-}
diff --git a/arch/mips/pci/pci-alchemy.c b/arch/mips/pci/pci-alchemy.c
index 01a2af8215c8..7285b5667568 100644
--- a/arch/mips/pci/pci-alchemy.c
+++ b/arch/mips/pci/pci-alchemy.c
@@ -52,7 +52,7 @@ struct alchemy_pci_context {
static struct alchemy_pci_context *__alchemy_pci_ctx;
-/* IO/MEM resources for PCI. Keep the memres in sync with __fixup_bigphys_addr
+/* IO/MEM resources for PCI. Keep the memres in sync with fixup_bigphys_addr
* in arch/mips/alchemy/common/setup.c
*/
static struct resource alchemy_pci_def_memres = {
diff --git a/arch/mips/pci/pci-emma2rh.c b/arch/mips/pci/pci-emma2rh.c
deleted file mode 100644
index 156091a3e341..000000000000
--- a/arch/mips/pci/pci-emma2rh.c
+++ /dev/null
@@ -1,72 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright (C) NEC Electronics Corporation 2004-2006
- *
- * This file is based on the arch/mips/ddb5xxx/ddb5477/pci.c
- *
- * Copyright 2001 MontaVista Software Inc.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/emma/emma2rh.h>
-
-static struct resource pci_io_resource = {
- .name = "pci IO space",
- .start = EMMA2RH_PCI_IO_BASE,
- .end = EMMA2RH_PCI_IO_BASE + EMMA2RH_PCI_IO_SIZE - 1,
- .flags = IORESOURCE_IO,
-};
-
-static struct resource pci_mem_resource = {
- .name = "pci memory space",
- .start = EMMA2RH_PCI_MEM_BASE,
- .end = EMMA2RH_PCI_MEM_BASE + EMMA2RH_PCI_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-extern struct pci_ops emma2rh_pci_ops;
-
-static struct pci_controller emma2rh_pci_controller = {
- .pci_ops = &emma2rh_pci_ops,
- .mem_resource = &pci_mem_resource,
- .io_resource = &pci_io_resource,
- .mem_offset = -0x04000000,
- .io_offset = 0,
-};
-
-static void __init emma2rh_pci_init(void)
-{
- /* setup PCI interface */
- emma2rh_out32(EMMA2RH_PCI_ARBIT_CTR, 0x70f);
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x80000a18);
- emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_COMMAND,
- PCI_STATUS_DEVSEL_MEDIUM | PCI_STATUS_CAP_LIST |
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_0, 0x10000000);
- emma2rh_out32(EMMA2RH_PCI_CONFIG_BASE + PCI_BASE_ADDRESS_1, 0x00000000);
-
- emma2rh_out32(EMMA2RH_PCI_IWIN0_CTR, 0x12000000 | 0x218);
- emma2rh_out32(EMMA2RH_PCI_IWIN1_CTR, 0x18000000 | 0x600);
- emma2rh_out32(EMMA2RH_PCI_INIT_ESWP, 0x00000200);
-
- emma2rh_out32(EMMA2RH_PCI_TWIN_CTR, 0x00009200);
- emma2rh_out32(EMMA2RH_PCI_TWIN_BADR, 0x00000000);
- emma2rh_out32(EMMA2RH_PCI_TWIN0_DADR, 0x00000000);
- emma2rh_out32(EMMA2RH_PCI_TWIN1_DADR, 0x00000000);
-}
-
-static int __init emma2rh_pci_setup(void)
-{
- emma2rh_pci_init();
- register_pci_controller(&emma2rh_pci_controller);
- return 0;
-}
-
-arch_initcall(emma2rh_pci_setup);
diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c
deleted file mode 100644
index 47f4ee6bbb3b..000000000000
--- a/arch/mips/pci/pci-lasat.c
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000, 2001, 04 Keith M Wesolowski
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-
-#include <asm/lasat/lasat.h>
-
-#include <irq.h>
-
-extern struct pci_ops nile4_pci_ops;
-extern struct pci_ops gt64xxx_pci0_ops;
-static struct resource lasat_pci_mem_resource = {
- .name = "LASAT PCI MEM",
- .start = 0x18000000,
- .end = 0x19ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct resource lasat_pci_io_resource = {
- .name = "LASAT PCI IO",
- .start = 0x1a000000,
- .end = 0x1bffffff,
- .flags = IORESOURCE_IO,
-};
-
-static struct pci_controller lasat_pci_controller = {
- .mem_resource = &lasat_pci_mem_resource,
- .io_resource = &lasat_pci_io_resource,
-};
-
-static int __init lasat_pci_setup(void)
-{
- printk(KERN_DEBUG "PCI: starting\n");
-
- if (IS_LASAT_200())
- lasat_pci_controller.pci_ops = &nile4_pci_ops;
- else
- lasat_pci_controller.pci_ops = &gt64xxx_pci0_ops;
-
- register_pci_controller(&lasat_pci_controller);
-
- return 0;
-}
-
-arch_initcall(lasat_pci_setup);
-
-#define LASAT_IRQ_ETH1 (LASAT_IRQ_BASE + 0)
-#define LASAT_IRQ_ETH0 (LASAT_IRQ_BASE + 1)
-#define LASAT_IRQ_HDC (LASAT_IRQ_BASE + 2)
-#define LASAT_IRQ_COMP (LASAT_IRQ_BASE + 3)
-#define LASAT_IRQ_HDLC (LASAT_IRQ_BASE + 4)
-#define LASAT_IRQ_PCIA (LASAT_IRQ_BASE + 5)
-#define LASAT_IRQ_PCIB (LASAT_IRQ_BASE + 6)
-#define LASAT_IRQ_PCIC (LASAT_IRQ_BASE + 7)
-#define LASAT_IRQ_PCID (LASAT_IRQ_BASE + 8)
-
-int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- switch (slot) {
- case 1:
- case 2:
- case 3:
- return LASAT_IRQ_PCIA + (((slot-1) + (pin-1)) % 4);
- case 4:
- return LASAT_IRQ_ETH1; /* Ethernet 1 (LAN 2) */
- case 5:
- return LASAT_IRQ_ETH0; /* Ethernet 0 (LAN 1) */
- case 6:
- return LASAT_IRQ_HDC; /* IDE controller */
- default:
- return 0xff; /* Illegal */
- }
-
- return -1;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-08 23:36:47 +0300