diff options
Diffstat (limited to 'arch/mips/mti-sead3/sead3-platform.c')
| -rw-r--r-- | arch/mips/mti-sead3/sead3-platform.c | 184 |
1 files changed, 176 insertions, 8 deletions
diff --git a/arch/mips/mti-sead3/sead3-platform.c b/arch/mips/mti-sead3/sead3-platform.c index 53ee6f1f018d..73b73efbfb05 100644 --- a/arch/mips/mti-sead3/sead3-platform.c +++ b/arch/mips/mti-sead3/sead3-platform.c @@ -5,10 +5,15 @@ * * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. */ -#include <linux/module.h> +#include <linux/dma-mapping.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/irqchip/mips-gic.h> +#include <linux/leds.h> +#include <linux/mtd/physmap.h> +#include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <linux/smsc911x.h> #include <asm/mips-boards/sead3int.h> @@ -36,20 +41,183 @@ static struct platform_device uart8250_device = { }, }; -static int __init uart8250_init(void) +static struct smsc911x_platform_config sead3_smsc911x_data = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, + .phy_interface = PHY_INTERFACE_MODE_MII, +}; + +static struct resource sead3_net_resources[] = { + { + .start = 0x1f010000, + .end = 0x1f01ffff, + .flags = IORESOURCE_MEM + }, { + .flags = IORESOURCE_IRQ + } +}; + +static struct platform_device sead3_net_device = { + .name = "smsc911x", + .id = 0, + .dev = { + .platform_data = &sead3_smsc911x_data, + }, + .num_resources = ARRAY_SIZE(sead3_net_resources), + .resource = sead3_net_resources +}; + +static struct mtd_partition sead3_mtd_partitions[] = { + { + .name = "User FS", + .offset = 0x00000000, + .size = 0x01fc0000, + }, { + .name = "Board Config", + .offset = 0x01fc0000, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE + }, +}; + +static struct physmap_flash_data sead3_flash_data = { + .width = 4, + .nr_parts = ARRAY_SIZE(sead3_mtd_partitions), + .parts = sead3_mtd_partitions +}; + +static struct resource sead3_flash_resource = { + .start = 0x1c000000, + .end = 0x1dffffff, + .flags = IORESOURCE_MEM +}; + +static struct platform_device sead3_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &sead3_flash_data, + }, + .num_resources = 1, + .resource = &sead3_flash_resource, +}; + +#define LEDFLAGS(bits, shift) \ + ((bits << 8) | (shift << 8)) + +#define LEDBITS(id, shift, bits) \ + .name = id #shift, \ + .flags = LEDFLAGS(bits, shift) + +static struct led_info led_data_info[] = { + { LEDBITS("bit", 0, 1) }, + { LEDBITS("bit", 1, 1) }, + { LEDBITS("bit", 2, 1) }, + { LEDBITS("bit", 3, 1) }, + { LEDBITS("bit", 4, 1) }, + { LEDBITS("bit", 5, 1) }, + { LEDBITS("bit", 6, 1) }, + { LEDBITS("bit", 7, 1) }, + { LEDBITS("all", 0, 8) }, +}; + +static struct led_platform_data led_data = { + .num_leds = ARRAY_SIZE(led_data_info), + .leds = led_data_info +}; + +static struct resource pled_resources[] = { + { + .start = 0x1f000210, + .end = 0x1f000217, + .flags = IORESOURCE_MEM + } +}; + +static struct platform_device pled_device = { + .name = "sead3::pled", + .id = 0, + .dev = { + .platform_data = &led_data, + }, + .num_resources = ARRAY_SIZE(pled_resources), + .resource = pled_resources +}; + + +static struct resource fled_resources[] = { + { + .start = 0x1f000218, + .end = 0x1f00021f, + .flags = IORESOURCE_MEM + } +}; + +static struct platform_device fled_device = { + .name = "sead3::fled", + .id = 0, + .dev = { + .platform_data = &led_data, + }, + .num_resources = ARRAY_SIZE(fled_resources), + .resource = fled_resources +}; + +static struct platform_device sead3_led_device = { + .name = "sead3-led", + .id = -1, +}; + +static struct resource ehci_resources[] = { + { + .start = 0x1b200000, + .end = 0x1b200fff, + .flags = IORESOURCE_MEM + }, { + .flags = IORESOURCE_IRQ + } +}; + +static u64 sead3_usbdev_dma_mask = DMA_BIT_MASK(32); + +static struct platform_device ehci_device = { + .name = "sead3-ehci", + .id = 0, + .dev = { + .dma_mask = &sead3_usbdev_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32) + }, + .num_resources = ARRAY_SIZE(ehci_resources), + .resource = ehci_resources +}; + +static struct platform_device *sead3_platform_devices[] __initdata = { + &uart8250_device, + &sead3_flash, + &pled_device, + &fled_device, + &sead3_led_device, + &ehci_device, + &sead3_net_device, +}; + +static int __init sead3_platforms_device_init(void) { if (gic_present) { uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0; uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1; + ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI; + sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET; } else { uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0; uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1; + ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI; + sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET; } - return platform_device_register(&uart8250_device); -} -module_init(uart8250_init); + return platform_add_devices(sead3_platform_devices, + ARRAY_SIZE(sead3_platform_devices)); +} -MODULE_AUTHOR("Chris Dearman <chris@mips.com>"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("8250 UART probe driver for SEAD3"); +device_initcall(sead3_platforms_device_init); |