summaryrefslogtreecommitdiff
path: root/arch/mips/loongson32
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/loongson32')
-rw-r--r--arch/mips/loongson32/common/platform.c105
-rw-r--r--arch/mips/loongson32/common/reset.c13
-rw-r--r--arch/mips/loongson32/common/time.c27
-rw-r--r--arch/mips/loongson32/ls1b/board.c67
4 files changed, 184 insertions, 28 deletions
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
index ddf1d4cbf31e..f2c714d8fb60 100644
--- a/arch/mips/loongson32/common/platform.c
+++ b/arch/mips/loongson32/common/platform.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -10,14 +10,17 @@
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
#include <linux/phy.h>
#include <linux/serial_8250.h>
#include <linux/stmmac.h>
#include <linux/usb/ehci_pdriver.h>
-#include <asm-generic/sizes.h>
-#include <cpufreq.h>
#include <loongson1.h>
+#include <cpufreq.h>
+#include <dma.h>
+#include <nand.h>
/* 8250/16550 compatible UART */
#define LS1X_UART(_id) \
@@ -45,7 +48,7 @@ struct platform_device ls1x_uart_pdev = {
},
};
-void __init ls1x_serial_setup(struct platform_device *pdev)
+void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
{
struct clk *clk;
struct plat_serial8250_port *p;
@@ -77,6 +80,42 @@ struct platform_device ls1x_cpufreq_pdev = {
},
};
+/* DMA */
+static struct resource ls1x_dma_resources[] = {
+ [0] = {
+ .start = LS1X_DMAC_BASE,
+ .end = LS1X_DMAC_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LS1X_DMA0_IRQ,
+ .end = LS1X_DMA0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = LS1X_DMA1_IRQ,
+ .end = LS1X_DMA1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ .start = LS1X_DMA2_IRQ,
+ .end = LS1X_DMA2_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_dma_pdev = {
+ .name = "ls1x-dma",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_dma_resources),
+ .resource = ls1x_dma_resources,
+};
+
+void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata)
+{
+ ls1x_dma_pdev.dev.platform_data = pdata;
+}
+
/* Synopsys Ethernet GMAC */
static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
.phy_mask = 0,
@@ -198,6 +237,64 @@ struct platform_device ls1x_eth1_pdev = {
},
};
+/* GPIO */
+static struct resource ls1x_gpio0_resources[] = {
+ [0] = {
+ .start = LS1X_GPIO0_BASE,
+ .end = LS1X_GPIO0_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_gpio0_pdev = {
+ .name = "ls1x-gpio",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_gpio0_resources),
+ .resource = ls1x_gpio0_resources,
+};
+
+static struct resource ls1x_gpio1_resources[] = {
+ [0] = {
+ .start = LS1X_GPIO1_BASE,
+ .end = LS1X_GPIO1_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_gpio1_pdev = {
+ .name = "ls1x-gpio",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ls1x_gpio1_resources),
+ .resource = ls1x_gpio1_resources,
+};
+
+/* NAND Flash */
+static struct resource ls1x_nand_resources[] = {
+ [0] = {
+ .start = LS1X_NAND_BASE,
+ .end = LS1X_NAND_BASE + SZ_32 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* DMA channel 0 is dedicated to NAND */
+ .start = LS1X_DMA_CHANNEL0,
+ .end = LS1X_DMA_CHANNEL0,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device ls1x_nand_pdev = {
+ .name = "ls1x-nand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_nand_resources),
+ .resource = ls1x_nand_resources,
+};
+
+void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata)
+{
+ ls1x_nand_pdev.dev.platform_data = pdata;
+}
+
/* USB EHCI */
static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
diff --git a/arch/mips/loongson32/common/reset.c b/arch/mips/loongson32/common/reset.c
index c41e4ca56ab4..8a1d9cc5a134 100644
--- a/arch/mips/loongson32/common/reset.c
+++ b/arch/mips/loongson32/common/reset.c
@@ -9,12 +9,13 @@
#include <linux/io.h>
#include <linux/pm.h>
+#include <linux/sizes.h>
#include <asm/idle.h>
#include <asm/reboot.h>
#include <loongson1.h>
-static void __iomem *wdt_base;
+static void __iomem *wdt_reg_base;
static void ls1x_halt(void)
{
@@ -26,9 +27,9 @@ static void ls1x_halt(void)
static void ls1x_restart(char *command)
{
- __raw_writel(0x1, wdt_base + WDT_EN);
- __raw_writel(0x1, wdt_base + WDT_TIMER);
- __raw_writel(0x1, wdt_base + WDT_SET);
+ __raw_writel(0x1, wdt_reg_base + WDT_EN);
+ __raw_writel(0x1, wdt_reg_base + WDT_TIMER);
+ __raw_writel(0x1, wdt_reg_base + WDT_SET);
ls1x_halt();
}
@@ -40,8 +41,8 @@ static void ls1x_power_off(void)
static int __init ls1x_reboot_setup(void)
{
- wdt_base = ioremap_nocache(LS1X_WDT_BASE, 0x0f);
- if (!wdt_base)
+ wdt_reg_base = ioremap_nocache(LS1X_WDT_BASE, (SZ_4 + SZ_8));
+ if (!wdt_reg_base)
panic("Failed to remap watchdog registers");
_machine_restart = ls1x_restart;
diff --git a/arch/mips/loongson32/common/time.c b/arch/mips/loongson32/common/time.c
index 0996b025eeef..ff224f0020e5 100644
--- a/arch/mips/loongson32/common/time.c
+++ b/arch/mips/loongson32/common/time.c
@@ -9,6 +9,7 @@
#include <linux/clk.h>
#include <linux/interrupt.h>
+#include <linux/sizes.h>
#include <asm/time.h>
#include <loongson1.h>
@@ -35,25 +36,25 @@
DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
-static void __iomem *timer_base;
+static void __iomem *timer_reg_base;
static uint32_t ls1x_jiffies_per_tick;
static inline void ls1x_pwmtimer_set_period(uint32_t period)
{
- __raw_writel(period, timer_base + PWM_HRC);
- __raw_writel(period, timer_base + PWM_LRC);
+ __raw_writel(period, timer_reg_base + PWM_HRC);
+ __raw_writel(period, timer_reg_base + PWM_LRC);
}
static inline void ls1x_pwmtimer_restart(void)
{
- __raw_writel(0x0, timer_base + PWM_CNT);
- __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+ __raw_writel(0x0, timer_reg_base + PWM_CNT);
+ __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
}
void __init ls1x_pwmtimer_init(void)
{
- timer_base = ioremap(LS1X_TIMER_BASE, 0xf);
- if (!timer_base)
+ timer_reg_base = ioremap_nocache(LS1X_TIMER_BASE, SZ_16);
+ if (!timer_reg_base)
panic("Failed to remap timer registers");
ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
@@ -86,7 +87,7 @@ static cycle_t ls1x_clocksource_read(struct clocksource *cs)
*/
jifs = jiffies;
/* read the count */
- count = __raw_readl(timer_base + PWM_CNT);
+ count = __raw_readl(timer_reg_base + PWM_CNT);
/*
* It's possible for count to appear to go the wrong way for this
@@ -131,7 +132,7 @@ static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
raw_spin_lock(&ls1x_timer_lock);
ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
ls1x_pwmtimer_restart();
- __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+ __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
raw_spin_unlock(&ls1x_timer_lock);
return 0;
@@ -140,7 +141,7 @@ static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
{
raw_spin_lock(&ls1x_timer_lock);
- __raw_writel(INT_EN | CNT_EN, timer_base + PWM_CTRL);
+ __raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
raw_spin_unlock(&ls1x_timer_lock);
return 0;
@@ -149,8 +150,8 @@ static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
{
raw_spin_lock(&ls1x_timer_lock);
- __raw_writel(__raw_readl(timer_base + PWM_CTRL) & ~CNT_EN,
- timer_base + PWM_CTRL);
+ __raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
+ timer_reg_base + PWM_CTRL);
raw_spin_unlock(&ls1x_timer_lock);
return 0;
@@ -220,7 +221,7 @@ void __init plat_time_init(void)
#ifdef CONFIG_CEVT_CSRC_LS1X
/* setup LS1X PWM timer */
- clk = clk_get(NULL, "ls1x_pwmtimer");
+ clk = clk_get(NULL, "ls1x-pwmtimer");
if (IS_ERR(clk))
panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
index 58daeea25739..38a1d404be1b 100644
--- a/arch/mips/loongson32/ls1b/board.c
+++ b/arch/mips/loongson32/ls1b/board.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2011 Zhang, Keguang <keguang.zhang@gmail.com>
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -7,26 +7,83 @@
* option) any later version.
*/
+#include <linux/leds.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
+
+#include <loongson1.h>
+#include <dma.h>
+#include <nand.h>
#include <platform.h>
+struct plat_ls1x_dma ls1x_dma_pdata = {
+ .nr_channels = 3,
+};
+
+static struct mtd_partition ls1x_nand_parts[] = {
+ {
+ .name = "kernel",
+ .offset = 0,
+ .size = SZ_16M,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+struct plat_ls1x_nand ls1x_nand_pdata = {
+ .parts = ls1x_nand_parts,
+ .nr_parts = ARRAY_SIZE(ls1x_nand_parts),
+ .hold_cycle = 0x2,
+ .wait_cycle = 0xc,
+};
+
+static const struct gpio_led ls1x_gpio_leds[] __initconst = {
+ {
+ .name = "LED9",
+ .default_trigger = "heartbeat",
+ .gpio = 38,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ }, {
+ .name = "LED6",
+ .default_trigger = "nand-disk",
+ .gpio = 39,
+ .active_low = 1,
+ .default_state = LEDS_GPIO_DEFSTATE_OFF,
+ },
+};
+
+static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
+ .num_leds = ARRAY_SIZE(ls1x_gpio_leds),
+ .leds = ls1x_gpio_leds,
+};
+
static struct platform_device *ls1b_platform_devices[] __initdata = {
&ls1x_uart_pdev,
&ls1x_cpufreq_pdev,
+ &ls1x_dma_pdev,
&ls1x_eth0_pdev,
&ls1x_eth1_pdev,
&ls1x_ehci_pdev,
+ &ls1x_gpio0_pdev,
+ &ls1x_gpio1_pdev,
+ &ls1x_nand_pdev,
&ls1x_rtc_pdev,
};
static int __init ls1b_platform_init(void)
{
- int err;
+ ls1x_serial_set_uartclk(&ls1x_uart_pdev);
+ ls1x_dma_set_platdata(&ls1x_dma_pdata);
+ ls1x_nand_set_platdata(&ls1x_nand_pdata);
- ls1x_serial_setup(&ls1x_uart_pdev);
+ gpio_led_register_device(-1, &ls1x_led_pdata);
- err = platform_add_devices(ls1b_platform_devices,
+ return platform_add_devices(ls1b_platform_devices,
ARRAY_SIZE(ls1b_platform_devices));
- return err;
}
arch_initcall(ls1b_platform_init);
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 17:58:17 +0300