1 files changed, 0 insertions, 192 deletions
diff --git a/arch/mips/include/asm/netlogic/xlp-hal/uart.h b/arch/mips/include/asm/netlogic/xlp-hal/uart.h
deleted file mode 100644
index a6c54424dd95..000000000000
--- a/arch/mips/include/asm/netlogic/xlp-hal/uart.h
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights
- * reserved.
- *
- * This software is available to you under a choice of one of two
- * licenses.  You may choose to be licensed under the terms of the GNU
- * General Public License (GPL) Version 2, available from the file
- * COPYING in the main directory of this source tree, or the NetLogic
- * license below:
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
- * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
- * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
- * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
- * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef __XLP_HAL_UART_H__
-#define __XLP_HAL_UART_H__
-
-/* UART Specific registers */
-#define UART_RX_DATA		0x00
-#define UART_TX_DATA		0x00
-
-#define UART_INT_EN		0x01
-#define UART_INT_ID		0x02
-#define UART_FIFO_CTL		0x02
-#define UART_LINE_CTL		0x03
-#define UART_MODEM_CTL		0x04
-#define UART_LINE_STS		0x05
-#define UART_MODEM_STS		0x06
-
-#define UART_DIVISOR0		0x00
-#define UART_DIVISOR1		0x01
-
-#define BASE_BAUD		(XLP_IO_CLK/16)
-#define BAUD_DIVISOR(baud)	(BASE_BAUD / baud)
-
-/* LCR mask values */
-#define LCR_5BITS		0x00
-#define LCR_6BITS		0x01
-#define LCR_7BITS		0x02
-#define LCR_8BITS		0x03
-#define LCR_STOPB		0x04
-#define LCR_PENAB		0x08
-#define LCR_PODD		0x00
-#define LCR_PEVEN		0x10
-#define LCR_PONE		0x20
-#define LCR_PZERO		0x30
-#define LCR_SBREAK		0x40
-#define LCR_EFR_ENABLE		0xbf
-#define LCR_DLAB		0x80
-
-/* MCR mask values */
-#define MCR_DTR			0x01
-#define MCR_RTS			0x02
-#define MCR_DRS			0x04
-#define MCR_IE			0x08
-#define MCR_LOOPBACK		0x10
-
-/* FCR mask values */
-#define FCR_RCV_RST		0x02
-#define FCR_XMT_RST		0x04
-#define FCR_RX_LOW		0x00
-#define FCR_RX_MEDL		0x40
-#define FCR_RX_MEDH		0x80
-#define FCR_RX_HIGH		0xc0
-
-/* IER mask values */
-#define IER_ERXRDY		0x1
-#define IER_ETXRDY		0x2
-#define IER_ERLS		0x4
-#define IER_EMSC		0x8
-
-#if !defined(LOCORE) && !defined(__ASSEMBLY__)
-
-#define nlm_read_uart_reg(b, r)		nlm_read_reg(b, r)
-#define nlm_write_uart_reg(b, r, v)	nlm_write_reg(b, r, v)
-#define nlm_get_uart_pcibase(node, inst)	\
-	nlm_pcicfg_base(cpu_is_xlp9xx() ?  XLP9XX_IO_UART_OFFSET(node) : \
-						XLP_IO_UART_OFFSET(node, inst))
-#define nlm_get_uart_regbase(node, inst)	\
-			(nlm_get_uart_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
-
-static inline void
-nlm_uart_set_baudrate(uint64_t base, int baud)
-{
-	uint32_t lcr;
-
-	lcr = nlm_read_uart_reg(base, UART_LINE_CTL);
-
-	/* enable divisor register, and write baud values */
-	nlm_write_uart_reg(base, UART_LINE_CTL, lcr | (1 << 7));
-	nlm_write_uart_reg(base, UART_DIVISOR0,
-			(BAUD_DIVISOR(baud) & 0xff));
-	nlm_write_uart_reg(base, UART_DIVISOR1,
-			((BAUD_DIVISOR(baud) >> 8) & 0xff));
-
-	/* restore default lcr */
-	nlm_write_uart_reg(base, UART_LINE_CTL, lcr);
-}
-
-static inline void
-nlm_uart_outbyte(uint64_t base, char c)
-{
-	uint32_t lsr;
-
-	for (;;) {
-		lsr = nlm_read_uart_reg(base, UART_LINE_STS);
-		if (lsr & 0x20)
-			break;
-	}
-
-	nlm_write_uart_reg(base, UART_TX_DATA, (int)c);
-}
-
-static inline char
-nlm_uart_inbyte(uint64_t base)
-{
-	int data, lsr;
-
-	for (;;) {
-		lsr = nlm_read_uart_reg(base, UART_LINE_STS);
-		if (lsr & 0x80) { /* parity/frame/break-error - push a zero */
-			data = 0;
-			break;
-		}
-		if (lsr & 0x01) {	/* Rx data */
-			data = nlm_read_uart_reg(base, UART_RX_DATA);
-			break;
-		}
-	}
-
-	return (char)data;
-}
-
-static inline int
-nlm_uart_init(uint64_t base, int baud, int databits, int stopbits,
-	int parity, int int_en, int loopback)
-{
-	uint32_t lcr;
-
-	lcr = 0;
-	if (databits >= 8)
-		lcr |= LCR_8BITS;
-	else if (databits == 7)
-		lcr |= LCR_7BITS;
-	else if (databits == 6)
-		lcr |= LCR_6BITS;
-	else
-		lcr |= LCR_5BITS;
-
-	if (stopbits > 1)
-		lcr |= LCR_STOPB;
-
-	lcr |= parity << 3;
-
-	/* setup default lcr */
-	nlm_write_uart_reg(base, UART_LINE_CTL, lcr);
-
-	/* Reset the FIFOs */
-	nlm_write_uart_reg(base, UART_LINE_CTL, FCR_RCV_RST | FCR_XMT_RST);
-
-	nlm_uart_set_baudrate(base, baud);
-
-	if (loopback)
-		nlm_write_uart_reg(base, UART_MODEM_CTL, 0x1f);
-
-	if (int_en)
-		nlm_write_uart_reg(base, UART_INT_EN, IER_ERXRDY | IER_ETXRDY);
-
-	return 0;
-}
-#endif /* !LOCORE && !__ASSEMBLY__ */
-#endif /* __XLP_HAL_UART_H__ */