diff options
Diffstat (limited to 'arch/mips/boot/dts')
47 files changed, 4506 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile new file mode 100644 index 000000000000..5d95e4bd709a --- /dev/null +++ b/arch/mips/boot/dts/Makefile @@ -0,0 +1,12 @@ +dts-dirs += brcm +dts-dirs += cavium-octeon +dts-dirs += lantiq +dts-dirs += mti +dts-dirs += netlogic +dts-dirs += ralink + +obj-y := $(addsuffix /, $(dts-dirs)) + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/brcm/Makefile b/arch/mips/boot/dts/brcm/Makefile new file mode 100644 index 000000000000..1c8353bfe003 --- /dev/null +++ b/arch/mips/boot/dts/brcm/Makefile @@ -0,0 +1,19 @@ +dtb-$(CONFIG_DT_BCM93384WVG) += bcm93384wvg.dtb +dtb-$(CONFIG_DT_BCM93384WVG_VIPER) += bcm93384wvg_viper.dtb +dtb-$(CONFIG_DT_BCM96368MVWG) += bcm96368mvwg.dtb +dtb-$(CONFIG_DT_BCM9EJTAGPRB) += bcm9ejtagprb.dtb +dtb-$(CONFIG_DT_BCM97125CBMB) += bcm97125cbmb.dtb +dtb-$(CONFIG_DT_BCM97346DBSMB) += bcm97346dbsmb.dtb +dtb-$(CONFIG_DT_BCM97358SVMB) += bcm97358svmb.dtb +dtb-$(CONFIG_DT_BCM97360SVMB) += bcm97360svmb.dtb +dtb-$(CONFIG_DT_BCM97362SVMB) += bcm97362svmb.dtb +dtb-$(CONFIG_DT_BCM97420C) += bcm97420c.dtb +dtb-$(CONFIG_DT_BCM97425SVMB) += bcm97425svmb.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi new file mode 100644 index 000000000000..aa406b43c65f --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm3384_viper.dtsi @@ -0,0 +1,108 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm3384-viper", "brcm,bcm33843-viper"; + + memory@0 { + device_type = "memory"; + + /* Typical ranges. The bootloader should fill these in. */ + reg = <0x06000000 0x02000000>, + <0x0e000000 0x02000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* 1/2 of the CPU core clock (standard MIPS behavior) */ + mips-hpt-frequency = <300000000>; + + cpu@0 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <0>; + }; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <54000000>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + ubus { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "brcm,ubus", "simple-bus"; + ranges; + /* No dma-ranges on Viper. */ + + periph_intc: periph_intc@14e00048 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x14e00048 0x4 0x14e0004c 0x4>, + <0x14e00350 0x4 0x14e00354 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <4>; + }; + + cmips_intc: cmips_intc@151f8048 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x151f8048 0x4 0x151f804c 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <30>; + brcm,int-map-mask = <0xffffffff>; + }; + + uart0: serial@14e00520 { + compatible = "brcm,bcm6345-uart"; + reg = <0x14e00520 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <2>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + ehci0: usb@15400300 { + compatible = "brcm,bcm3384-ehci", "generic-ehci"; + reg = <0x15400300 0x100>; + big-endian; + interrupt-parent = <&periph_intc>; + interrupts = <41>; + status = "disabled"; + }; + + ohci0: usb@15400400 { + compatible = "brcm,bcm3384-ohci", "generic-ohci"; + reg = <0x15400400 0x100>; + big-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <40>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi b/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi new file mode 100644 index 000000000000..a7bd8564e9f6 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm3384_zephyr.dtsi @@ -0,0 +1,126 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm3384", "brcm,bcm33843"; + + memory@0 { + device_type = "memory"; + + /* Typical range. The bootloader should fill this in. */ + reg = <0x0 0x08000000>; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* On BMIPS5000 this is 1/8th of the CPU core clock */ + mips-hpt-frequency = <100000000>; + + cpu@0 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <1>; + }; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <54000000>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + ubus { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "brcm,ubus", "simple-bus"; + ranges; + dma-ranges = <0x00000000 0x08000000 0x08000000>, + <0x08000000 0x00000000 0x08000000>; + + periph_intc: periph_intc@14e00038 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x14e00038 0x4 0x14e0003c 0x4>, + <0x14e00340 0x4 0x14e00344 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <4>; + }; + + zmips_intc: zmips_intc@104b0060 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x104b0060 0x4 0x104b0064 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <29>; + brcm,int-map-mask = <0xffffffff>; + }; + + iop_intc: iop_intc@14e00058 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x14e00058 0x4 0x14e0005c 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <6>; + brcm,int-map-mask = <0xffffffff>; + }; + + uart0: serial@14e00520 { + compatible = "brcm,bcm6345-uart"; + reg = <0x14e00520 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <2>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + ehci0: usb@15400300 { + compatible = "brcm,bcm3384-ehci", "generic-ehci"; + reg = <0x15400300 0x100>; + big-endian; + interrupt-parent = <&periph_intc>; + interrupts = <41>; + status = "disabled"; + }; + + ohci0: usb@15400400 { + compatible = "brcm,bcm3384-ohci", "generic-ohci"; + reg = <0x15400400 0x100>; + big-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <40>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm6328.dtsi b/arch/mips/boot/dts/brcm/bcm6328.dtsi new file mode 100644 index 000000000000..41891c1e58bd --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm6328.dtsi @@ -0,0 +1,86 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6328"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <160000000>; + + cpu@0 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <1>; + }; + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + ubus { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges; + + periph_intc: periph_intc@10000020 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x10000024 0x4 0x1000002c 0x4>, + <0x10000020 0x4 0x10000028 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; + }; + + uart0: serial@10000100 { + compatible = "brcm,bcm6345-uart"; + reg = <0x10000100 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <28>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + timer: timer@10000040 { + compatible = "syscon"; + reg = <0x10000040 0x2c>; + little-endian; + }; + + reboot { + compatible = "syscon-reboot"; + regmap = <&timer>; + offset = <0x28>; + mask = <0x1>; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm6368.dtsi b/arch/mips/boot/dts/brcm/bcm6368.dtsi new file mode 100644 index 000000000000..45152bc22117 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm6368.dtsi @@ -0,0 +1,93 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6368"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <200000000>; + + cpu@0 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4350"; + device_type = "cpu"; + reg = <1>; + }; + + }; + + clocks { + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + ubus { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges; + + periph_intc: periph_intc@10000020 { + compatible = "brcm,bcm3380-l2-intc"; + reg = <0x10000024 0x4 0x1000002c 0x4>, + <0x10000020 0x4 0x10000028 0x4>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; + }; + + uart0: serial@10000100 { + compatible = "brcm,bcm6345-uart"; + reg = <0x10000100 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <2>; + clocks = <&periph_clk>; + status = "disabled"; + }; + + ehci0: usb@10001500 { + compatible = "brcm,bcm6368-ehci", "generic-ehci"; + reg = <0x10001500 0x100>; + big-endian; + interrupt-parent = <&periph_intc>; + interrupts = <7>; + status = "disabled"; + }; + + ohci0: usb@10001600 { + compatible = "brcm,bcm6368-ohci", "generic-ohci"; + reg = <0x10001600 0x100>; + big-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <5>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7125.dtsi b/arch/mips/boot/dts/brcm/bcm7125.dtsi new file mode 100644 index 000000000000..1a7efa883c5e --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7125.dtsi @@ -0,0 +1,139 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7125"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <202500000>; + + cpu@0 { + compatible = "brcm,bmips4380"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4380"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@441400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x441400 0x30>, <0x441600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@401800 { + compatible = "brcm,l2-intc"; + reg = <0x401800 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <23>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x2f7>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0", + "bsp_0", "rdc_0", "rptd_0", + "avd_0", "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406780 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406780 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <18>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7125-sun-top-ctrl", "syscon"; + reg = <0x404000 0x60c>; + little-endian; + }; + + reboot { + compatible = "brcm,bcm7038-reboot"; + syscon = <&sun_top_ctrl 0x8 0x14>; + }; + + uart0: serial@406b00 { + compatible = "ns16550a"; + reg = <0x406b00 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <21>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + ehci0: usb@488300 { + compatible = "brcm,bcm7125-ehci", "generic-ehci"; + reg = <0x488300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <60>; + status = "disabled"; + }; + + ohci0: usb@488400 { + compatible = "brcm,bcm7125-ohci", "generic-ohci"; + reg = <0x488400 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7346.dtsi b/arch/mips/boot/dts/brcm/bcm7346.dtsi new file mode 100644 index 000000000000..1f30728a3177 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7346.dtsi @@ -0,0 +1,224 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7346"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <163125000>; + + cpu@0 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@411400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x411400 0x30>, <0x411600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <51>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x673>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", + "rdc_0", "raaga_0", + "jtag_0", "svd_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406780 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406780 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <59>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7346-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406900 { + compatible = "ns16550a"; + reg = <0x406900 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <64>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@430000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v2"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x430000 0x4c8c>; + interrupts = <24>, <25>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v2"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7346-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <68>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7346-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <70>; + status = "disabled"; + }; + + ehci1: usb@480500 { + compatible = "brcm,bcm7346-ehci", "generic-ehci"; + reg = <0x480500 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <69>; + status = "disabled"; + }; + + ohci1: usb@480600 { + compatible = "brcm,bcm7346-ohci", "generic-ohci"; + reg = <0x480600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <71>; + status = "disabled"; + }; + + ehci2: usb@490300 { + compatible = "brcm,bcm7346-ehci", "generic-ehci"; + reg = <0x490300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <73>; + status = "disabled"; + }; + + ohci2: usb@490400 { + compatible = "brcm,bcm7346-ohci", "generic-ohci"; + reg = <0x490400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <75>; + status = "disabled"; + }; + + ehci3: usb@490500 { + compatible = "brcm,bcm7346-ehci", "generic-ehci"; + reg = <0x490500 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <74>; + status = "disabled"; + }; + + ohci3: usb@490600 { + compatible = "brcm,bcm7346-ohci", "generic-ohci"; + reg = <0x490600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <76>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7358.dtsi b/arch/mips/boot/dts/brcm/bcm7358.dtsi new file mode 100644 index 000000000000..2c2aa9368f76 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7358.dtsi @@ -0,0 +1,161 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7358"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <375000000>; + + cpu@0 { + compatible = "brcm,bmips3300"; + device_type = "cpu"; + reg = <0>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@411400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x411400 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <48>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x2f3>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", + "rdc_0", "raaga_0", + "avd_0", "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406600 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406600 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <56>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7358-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406800 { + compatible = "ns16550a"; + reg = <0x406800 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@430000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v2"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x430000 0x4c8c>; + interrupts = <24>, <25>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v2"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7358-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7358-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <66>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7360.dtsi b/arch/mips/boot/dts/brcm/bcm7360.dtsi new file mode 100644 index 000000000000..f23b0aed276f --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7360.dtsi @@ -0,0 +1,161 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7360"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <375000000>; + + cpu@0 { + compatible = "brcm,bmips3300"; + device_type = "cpu"; + reg = <0>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@411400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x411400 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <48>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x2f3>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", + "rdc_0", "raaga_0", + "avd_0", "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406600 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406600 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <56>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7360-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406800 { + compatible = "ns16550a"; + reg = <0x406800 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@430000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v2"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x430000 0x4c8c>; + interrupts = <24>, <25>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v2"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7360-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7360-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <66>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7362.dtsi b/arch/mips/boot/dts/brcm/bcm7362.dtsi new file mode 100644 index 000000000000..da99db665bbc --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7362.dtsi @@ -0,0 +1,167 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7362"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <375000000>; + + cpu@0 { + compatible = "brcm,bmips4380"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips4380"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@411400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x411400 0x30>, <0x411600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <48>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x2f3>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", + "rdc_0", "raaga_0", + "avd_0", "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406600 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406600 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <56>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7362-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406800 { + compatible = "ns16550a"; + reg = <0x406800 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@430000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v2"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x430000 0x4c8c>; + interrupts = <24>, <25>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v2"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7362-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7362-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <66>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7420.dtsi b/arch/mips/boot/dts/brcm/bcm7420.dtsi new file mode 100644 index 000000000000..5f55d0a50a28 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7420.dtsi @@ -0,0 +1,184 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7420"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <93750000>; + + cpu@0 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@441400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x441400 0x30>, <0x441600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@401800 { + compatible = "brcm,l2-intc"; + reg = <0x401800 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <23>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x3ff>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pci_0", + "pcie_0", "bsp_0", "rdc_0", + "rptd_0", "avd_0", "avd_1", + "jtag_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406780 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406780 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <18>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7420-sun-top-ctrl", "syscon"; + reg = <0x404000 0x60c>; + little-endian; + }; + + reboot { + compatible = "brcm,bcm7038-reboot"; + syscon = <&sun_top_ctrl 0x8 0x14>; + }; + + uart0: serial@406b00 { + compatible = "ns16550a"; + reg = <0x406b00 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <21>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@468000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v1"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x468000 0x3c8c>; + interrupts = <69>, <79>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v1"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,65nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@488300 { + compatible = "brcm,bcm7420-ehci", "generic-ehci"; + reg = <0x488300 0x100>; + interrupt-parent = <&periph_intc>; + interrupts = <60>; + status = "disabled"; + }; + + ohci0: usb@488400 { + compatible = "brcm,bcm7420-ohci", "generic-ohci"; + reg = <0x488400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + status = "disabled"; + }; + + ehci1: usb@488500 { + compatible = "brcm,bcm7420-ehci", "generic-ehci"; + reg = <0x488500 0x100>; + interrupt-parent = <&periph_intc>; + interrupts = <55>; + status = "disabled"; + }; + + ohci1: usb@488600 { + compatible = "brcm,bcm7420-ohci", "generic-ohci"; + reg = <0x488600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <62>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm7425.dtsi b/arch/mips/boot/dts/brcm/bcm7425.dtsi new file mode 100644 index 000000000000..5b660b617ead --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm7425.dtsi @@ -0,0 +1,225 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm7425"; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + mips-hpt-frequency = <163125000>; + + cpu@0 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,bmips5000"; + device_type = "cpu"; + reg = <1>; + }; + }; + + aliases { + uart0 = &uart0; + }; + + cpu_intc: cpu_intc { + #address-cells = <0>; + compatible = "mti,cpu-interrupt-controller"; + + interrupt-controller; + #interrupt-cells = <1>; + }; + + clocks { + uart_clk: uart_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <81000000>; + }; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "simple-bus"; + ranges = <0 0x10000000 0x01000000>; + + periph_intc: periph_intc@41a400 { + compatible = "brcm,bcm7038-l1-intc"; + reg = <0x41a400 0x30>, <0x41a600 0x30>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpu_intc>; + interrupts = <2>, <3>; + }; + + sun_l2_intc: sun_l2_intc@403000 { + compatible = "brcm,l2-intc"; + reg = <0x403000 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&periph_intc>; + interrupts = <47>; + }; + + gisb-arb@400000 { + compatible = "brcm,bcm7400-gisb-arb"; + reg = <0x400000 0xdc>; + native-endian; + interrupt-parent = <&sun_l2_intc>; + interrupts = <0>, <2>; + brcm,gisb-arb-master-mask = <0x177b>; + brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "pcie_0", + "bsp_0", "rdc_0", + "raaga_0", "avd_1", + "jtag_0", "svd_0", + "vice_0"; + }; + + upg_irq0_intc: upg_irq0_intc@406780 { + compatible = "brcm,bcm7120-l2-intc"; + reg = <0x406780 0x8>; + + brcm,int-map-mask = <0x44>; + brcm,int-fwd-mask = <0x70000>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&periph_intc>; + interrupts = <55>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + little-endian; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; + + uart0: serial@406b00 { + compatible = "ns16550a"; + reg = <0x406b00 0x20>; + reg-io-width = <0x4>; + reg-shift = <0x2>; + interrupt-parent = <&periph_intc>; + interrupts = <61>; + clocks = <&uart_clk>; + status = "disabled"; + }; + + enet0: ethernet@b80000 { + phy-mode = "internal"; + phy-handle = <&phy1>; + mac-address = [ 00 10 18 36 23 1a ]; + compatible = "brcm,genet-v3"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0xb80000 0x11c88>; + interrupts = <17>, <18>; + interrupt-parent = <&periph_intc>; + status = "disabled"; + + mdio@e14 { + compatible = "brcm,genet-mdio-v3"; + #address-cells = <0x1>; + #size-cells = <0x0>; + reg = <0xe14 0x8>; + + phy1: ethernet-phy@1 { + max-speed = <100>; + reg = <0x1>; + compatible = "brcm,40nm-ephy", + "ethernet-phy-ieee802.3-c22"; + }; + }; + }; + + ehci0: usb@480300 { + compatible = "brcm,bcm7425-ehci", "generic-ehci"; + reg = <0x480300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <65>; + status = "disabled"; + }; + + ohci0: usb@480400 { + compatible = "brcm,bcm7425-ohci", "generic-ohci"; + reg = <0x480400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <67>; + status = "disabled"; + }; + + ehci1: usb@480500 { + compatible = "brcm,bcm7425-ehci", "generic-ehci"; + reg = <0x480500 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <66>; + status = "disabled"; + }; + + ohci1: usb@480600 { + compatible = "brcm,bcm7425-ohci", "generic-ohci"; + reg = <0x480600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <68>; + status = "disabled"; + }; + + ehci2: usb@490300 { + compatible = "brcm,bcm7425-ehci", "generic-ehci"; + reg = <0x490300 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <70>; + status = "disabled"; + }; + + ohci2: usb@490400 { + compatible = "brcm,bcm7425-ohci", "generic-ohci"; + reg = <0x490400 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <72>; + status = "disabled"; + }; + + ehci3: usb@490500 { + compatible = "brcm,bcm7425-ehci", "generic-ehci"; + reg = <0x490500 0x100>; + native-endian; + interrupt-parent = <&periph_intc>; + interrupts = <71>; + status = "disabled"; + }; + + ohci3: usb@490600 { + compatible = "brcm,bcm7425-ohci", "generic-ohci"; + reg = <0x490600 0x100>; + native-endian; + no-big-frame-no; + interrupt-parent = <&periph_intc>; + interrupts = <73>; + status = "disabled"; + }; + }; +}; diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg.dts b/arch/mips/boot/dts/brcm/bcm93384wvg.dts new file mode 100644 index 000000000000..d1e44a17d41a --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm93384wvg.dts @@ -0,0 +1,25 @@ +/dts-v1/; + +/include/ "bcm3384_zephyr.dtsi" + +/ { + compatible = "brcm,bcm93384wvg", "brcm,bcm3384"; + model = "Broadcom BCM93384WVG"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts new file mode 100644 index 000000000000..1ecb2696aca8 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm93384wvg_viper.dts @@ -0,0 +1,25 @@ +/dts-v1/; + +/include/ "bcm3384_viper.dtsi" + +/ { + compatible = "brcm,bcm93384wvg-viper", "brcm,bcm3384-viper"; + model = "Broadcom BCM93384WVG-viper"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm96368mvwg.dts b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts new file mode 100644 index 000000000000..0e890c28fe5c --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm96368mvwg.dts @@ -0,0 +1,31 @@ +/dts-v1/; + +/include/ "bcm6368.dtsi" + +/ { + compatible = "brcm,bcm96368mvwg", "brcm,bcm6368"; + model = "Broadcom BCM96368MVWG"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x04000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* FIXME: need to set up USB_CTRL registers first */ +&ehci0 { + status = "disabled"; +}; + +&ohci0 { + status = "disabled"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97125cbmb.dts b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts new file mode 100644 index 000000000000..e046b1109eab --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97125cbmb.dts @@ -0,0 +1,31 @@ +/dts-v1/; + +/include/ "bcm7125.dtsi" + +/ { + compatible = "brcm,bcm97125cbmb", "brcm,bcm7125"; + model = "Broadcom BCM97125CBMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* FIXME: USB is wonky; disable it for now */ +&ehci0 { + status = "disabled"; +}; + +&ohci0 { + status = "disabled"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts new file mode 100644 index 000000000000..70f196d89d26 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97346dbsmb.dts @@ -0,0 +1,58 @@ +/dts-v1/; + +/include/ "bcm7346.dtsi" + +/ { + compatible = "brcm,bcm97346dbsmb", "brcm,bcm7346"; + model = "Broadcom BCM97346DBSMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97358svmb.dts b/arch/mips/boot/dts/brcm/bcm97358svmb.dts new file mode 100644 index 000000000000..d18e6d947739 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97358svmb.dts @@ -0,0 +1,34 @@ +/dts-v1/; + +/include/ "bcm7358.dtsi" + +/ { + compatible = "brcm,bcm97358svmb", "brcm,bcm7358"; + model = "Broadcom BCM97358SVMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97360svmb.dts b/arch/mips/boot/dts/brcm/bcm97360svmb.dts new file mode 100644 index 000000000000..4fe515500102 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97360svmb.dts @@ -0,0 +1,34 @@ +/dts-v1/; + +/include/ "bcm7360.dtsi" + +/ { + compatible = "brcm,bcm97360svmb", "brcm,bcm7360"; + model = "Broadcom BCM97360SVMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97362svmb.dts b/arch/mips/boot/dts/brcm/bcm97362svmb.dts new file mode 100644 index 000000000000..b7b88e5dc9e7 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97362svmb.dts @@ -0,0 +1,34 @@ +/dts-v1/; + +/include/ "bcm7362.dtsi" + +/ { + compatible = "brcm,bcm97362svmb", "brcm,bcm7362"; + model = "Broadcom BCM97362SVMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>, <0x20000000 0x30000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97420c.dts b/arch/mips/boot/dts/brcm/bcm97420c.dts new file mode 100644 index 000000000000..67fe1f3a3891 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97420c.dts @@ -0,0 +1,45 @@ +/dts-v1/; + +/include/ "bcm7420.dtsi" + +/ { + compatible = "brcm,bcm97420c", "brcm,bcm7420"; + model = "Broadcom BCM97420C"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>, + <0x20000000 0x30000000>, + <0x60000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +/* FIXME: MAC driver comes up but cannot attach to PHY */ +&enet0 { + status = "disabled"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm97425svmb.dts b/arch/mips/boot/dts/brcm/bcm97425svmb.dts new file mode 100644 index 000000000000..689c68a4f9c8 --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm97425svmb.dts @@ -0,0 +1,60 @@ +/dts-v1/; + +/include/ "bcm7425.dtsi" + +/ { + compatible = "brcm,bcm97425svmb", "brcm,bcm7425"; + model = "Broadcom BCM97425SVMB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>, + <0x20000000 0x30000000>, + <0x90000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; + +&enet0 { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts new file mode 100644 index 000000000000..1da4608680aa --- /dev/null +++ b/arch/mips/boot/dts/brcm/bcm9ejtagprb.dts @@ -0,0 +1,22 @@ +/dts-v1/; + +/include/ "bcm6328.dtsi" + +/ { + compatible = "brcm,bcm9ejtagprb", "brcm,bcm6328"; + model = "Broadcom BCM9EJTAGPRB"; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/mips/boot/dts/cavium-octeon/Makefile b/arch/mips/boot/dts/cavium-octeon/Makefile new file mode 100644 index 000000000000..5b99c40a058f --- /dev/null +++ b/arch/mips/boot/dts/cavium-octeon/Makefile @@ -0,0 +1,9 @@ +dtb-$(CONFIG_CAVIUM_OCTEON_SOC) += octeon_3xxx.dtb octeon_68xx.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts new file mode 100644 index 000000000000..9c48e0586ba7 --- /dev/null +++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts @@ -0,0 +1,602 @@ +/dts-v1/; +/* + * OCTEON 3XXX, 5XXX, 63XX device tree skeleton. + * + * This device tree is pruned and patched by early boot code before + * use. Because of this, it contains a super-set of the available + * devices and properties. + */ +/ { + compatible = "cavium,octeon-3860"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&ciu>; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; /* Direct mapping */ + + ciu: interrupt-controller@1070000000000 { + compatible = "cavium,octeon-3860-ciu"; + interrupt-controller; + /* Interrupts are specified by two parts: + * 1) Controller register (0 or 1) + * 2) Bit within the register (0..63) + */ + #interrupt-cells = <2>; + reg = <0x10700 0x00000000 0x0 0x7000>; + }; + + gpio: gpio-controller@1070000000800 { + #gpio-cells = <2>; + compatible = "cavium,octeon-3860-gpio"; + reg = <0x10700 0x00000800 0x0 0x100>; + gpio-controller; + /* Interrupts are specified by two parts: + * 1) GPIO pin number (0..15) + * 2) Triggering (1 - edge rising + * 2 - edge falling + * 4 - level active high + * 8 - level active low) + */ + interrupt-controller; + #interrupt-cells = <2>; + /* The GPIO pin connect to 16 consecutive CUI bits */ + interrupts = <0 16>, <0 17>, <0 18>, <0 19>, + <0 20>, <0 21>, <0 22>, <0 23>, + <0 24>, <0 25>, <0 26>, <0 27>, + <0 28>, <0 29>, <0 30>, <0 31>; + }; + + smi0: mdio@1180000001800 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00001800 0x0 0x40>; + + phy0: ethernet-phy@0 { + compatible = "marvell,88e1118"; + marvell,reg-init = + /* Fix rx and tx clock transition timing */ + <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */ + /* Adjust LED drive. */ + <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */ + /* irq, blink-activity, blink-link */ + <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { + compatible = "marvell,88e1118"; + marvell,reg-init = + /* Fix rx and tx clock transition timing */ + <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */ + /* Adjust LED drive. */ + <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */ + /* irq, blink-activity, blink-link */ + <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */ + reg = <1>; + }; + + phy2: ethernet-phy@2 { + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy5: ethernet-phy@5 { + reg = <5>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + + phy6: ethernet-phy@6 { + reg = <6>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy7: ethernet-phy@7 { + reg = <7>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy8: ethernet-phy@8 { + reg = <8>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy9: ethernet-phy@9 { + reg = <9>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + }; + + smi1: mdio@1180000001900 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00001900 0x0 0x40>; + + phy100: ethernet-phy@1 { + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy101: ethernet-phy@2 { + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy102: ethernet-phy@3 { + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + phy103: ethernet-phy@4 { + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + }; + }; + + mix0: ethernet@1070000100000 { + compatible = "cavium,octeon-5750-mix"; + reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */ + <0x11800 0xE0000000 0x0 0x300>, /* AGL */ + <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */ + <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */ + cell-index = <0>; + interrupts = <0 62>, <1 46>; + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy0>; + }; + + mix1: ethernet@1070000100800 { + compatible = "cavium,octeon-5750-mix"; + reg = <0x10700 0x00100800 0x0 0x100>, /* MIX */ + <0x11800 0xE0000800 0x0 0x300>, /* AGL */ + <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */ + <0x11800 0xE0002008 0x0 0x8>; /* AGL_PRT_CTL */ + cell-index = <1>; + interrupts = <1 18>, < 1 46>; + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy1>; + }; + + pip: pip@11800a0000000 { + compatible = "cavium,octeon-3860-pip"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0xa0000000 0x0 0x2000>; + + interface@0 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy2>; + cavium,alt-phy-handle = <&phy100>; + }; + ethernet@1 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x1>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy3>; + cavium,alt-phy-handle = <&phy101>; + }; + ethernet@2 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x2>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy4>; + cavium,alt-phy-handle = <&phy102>; + }; + ethernet@3 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x3>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy5>; + cavium,alt-phy-handle = <&phy103>; + }; + ethernet@4 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x4>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@5 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x5>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@6 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x6>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@7 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x7>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@8 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x8>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@9 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x9>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@a { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0xa>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@b { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0xb>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@c { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0xc>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@d { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0xd>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@e { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0xe>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + ethernet@f { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0xf>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + interface@1 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy6>; + }; + ethernet@1 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x1>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy7>; + }; + ethernet@2 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x2>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy8>; + }; + ethernet@3 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x3>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy9>; + }; + }; + }; + + twsi0: i2c@1180000001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cavium,octeon-3860-twsi"; + reg = <0x11800 0x00001000 0x0 0x200>; + interrupts = <0 45>; + clock-frequency = <100000>; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + tmp@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + }; + + twsi1: i2c@1180000001200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cavium,octeon-3860-twsi"; + reg = <0x11800 0x00001200 0x0 0x200>; + interrupts = <0 59>; + clock-frequency = <100000>; + }; + + uart0: serial@1180000000800 { + compatible = "cavium,octeon-3860-uart","ns16550"; + reg = <0x11800 0x00000800 0x0 0x400>; + clock-frequency = <0>; + current-speed = <115200>; + reg-shift = <3>; + interrupts = <0 34>; + }; + + uart1: serial@1180000000c00 { + compatible = "cavium,octeon-3860-uart","ns16550"; + reg = <0x11800 0x00000c00 0x0 0x400>; + clock-frequency = <0>; + current-speed = <115200>; + reg-shift = <3>; + interrupts = <0 35>; + }; + + uart2: serial@1180000000400 { + compatible = "cavium,octeon-3860-uart","ns16550"; + reg = <0x11800 0x00000400 0x0 0x400>; + clock-frequency = <0>; + current-speed = <115200>; + reg-shift = <3>; + interrupts = <1 16>; + }; + + bootbus: bootbus@1180000000000 { + compatible = "cavium,octeon-3860-bootbus"; + reg = <0x11800 0x00000000 0x0 0x200>; + /* The chip select number and offset */ + #address-cells = <2>; + /* The size of the chip select region */ + #size-cells = <1>; + ranges = <0 0 0x0 0x1f400000 0xc00000>, + <1 0 0x10000 0x30000000 0>, + <2 0 0x10000 0x40000000 0>, + <3 0 0x10000 0x50000000 0>, + <4 0 0x0 0x1d020000 0x10000>, + <5 0 0x0 0x1d040000 0x10000>, + <6 0 0x0 0x1d050000 0x10000>, + <7 0 0x10000 0x90000000 0>; + + cavium,cs-config@0 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <0>; + cavium,t-adr = <20>; + cavium,t-ce = <60>; + cavium,t-oe = <60>; + cavium,t-we = <45>; + cavium,t-rd-hld = <35>; + cavium,t-wr-hld = <45>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <35>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <8>; + }; + cavium,cs-config@4 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <4>; + cavium,t-adr = <320>; + cavium,t-ce = <320>; + cavium,t-oe = <320>; + cavium,t-we = <320>; + cavium,t-rd-hld = <320>; + cavium,t-wr-hld = <320>; + cavium,t-pause = <320>; + cavium,t-wait = <320>; + cavium,t-page = <320>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <8>; + }; + cavium,cs-config@5 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <5>; + cavium,t-adr = <5>; + cavium,t-ce = <300>; + cavium,t-oe = <125>; + cavium,t-we = <150>; + cavium,t-rd-hld = <100>; + cavium,t-wr-hld = <30>; + cavium,t-pause = <0>; + cavium,t-wait = <30>; + cavium,t-page = <320>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <16>; + }; + cavium,cs-config@6 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <6>; + cavium,t-adr = <5>; + cavium,t-ce = <300>; + cavium,t-oe = <270>; + cavium,t-we = <150>; + cavium,t-rd-hld = <100>; + cavium,t-wr-hld = <70>; + cavium,t-pause = <0>; + cavium,t-wait = <0>; + cavium,t-page = <320>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,wait-mode; + cavium,bus-width = <16>; + }; + + flash0: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + }; + + led0: led-display@4,0 { + compatible = "avago,hdsp-253x"; + reg = <4 0x20 0x20>, <4 0 0x20>; + }; + + cf0: compact-flash@5,0 { + compatible = "cavium,ebt3000-compact-flash"; + reg = <5 0 0x10000>, <6 0 0x10000>; + cavium,bus-width = <16>; + cavium,true-ide; + cavium,dma-engine-handle = <&dma0>; + }; + }; + + dma0: dma-engine@1180000000100 { + compatible = "cavium,octeon-5750-bootbus-dma"; + reg = <0x11800 0x00000100 0x0 0x8>; + interrupts = <0 63>; + }; + dma1: dma-engine@1180000000108 { + compatible = "cavium,octeon-5750-bootbus-dma"; + reg = <0x11800 0x00000108 0x0 0x8>; + interrupts = <0 63>; + }; + + uctl: uctl@118006f000000 { + compatible = "cavium,octeon-6335-uctl"; + reg = <0x11800 0x6f000000 0x0 0x100>; + ranges; /* Direct mapping */ + #address-cells = <2>; + #size-cells = <2>; + /* 12MHz, 24MHz and 48MHz allowed */ + refclk-frequency = <12000000>; + /* Either "crystal" or "external" */ + refclk-type = "crystal"; + + ehci@16f0000000000 { + compatible = "cavium,octeon-6335-ehci","usb-ehci"; + reg = <0x16f00 0x00000000 0x0 0x100>; + interrupts = <0 56>; + big-endian-regs; + }; + ohci@16f0000000400 { + compatible = "cavium,octeon-6335-ohci","usb-ohci"; + reg = <0x16f00 0x00000400 0x0 0x100>; + interrupts = <0 56>; + big-endian-regs; + }; + }; + + usbn: usbn@1180068000000 { + compatible = "cavium,octeon-5750-usbn"; + reg = <0x11800 0x68000000 0x0 0x1000>; + ranges; /* Direct mapping */ + #address-cells = <2>; + #size-cells = <2>; + /* 12MHz, 24MHz and 48MHz allowed */ + refclk-frequency = <12000000>; + /* Either "crystal" or "external" */ + refclk-type = "crystal"; + + usbc@16f0010000000 { + compatible = "cavium,octeon-5750-usbc"; + reg = <0x16f00 0x10000000 0x0 0x80000>; + interrupts = <0 56>; + }; + }; + }; + + aliases { + mix0 = &mix0; + mix1 = &mix1; + pip = &pip; + smi0 = &smi0; + smi1 = &smi1; + twsi0 = &twsi0; + twsi1 = &twsi1; + uart0 = &uart0; + uart1 = &uart1; + uart2 = &uart2; + flash0 = &flash0; + cf0 = &cf0; + uctl = &uctl; + usbn = &usbn; + led0 = &led0; + }; + + dsr1000n-leds { + compatible = "gpio-leds"; + usb1 { + label = "usb1"; + gpios = <&gpio 9 1>; /* Active low */ + }; + usb2 { + label = "usb2"; + gpios = <&gpio 10 1>; /* Active low */ + }; + }; + }; diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts new file mode 100644 index 000000000000..79b46fcb0a11 --- /dev/null +++ b/arch/mips/boot/dts/cavium-octeon/octeon_68xx.dts @@ -0,0 +1,625 @@ +/dts-v1/; +/* + * OCTEON 68XX device tree skeleton. + * + * This device tree is pruned and patched by early boot code before + * use. Because of this, it contains a super-set of the available + * devices and properties. + */ +/ { + compatible = "cavium,octeon-6880"; + #address-cells = <2>; + #size-cells = <2>; + interrupt-parent = <&ciu2>; + + soc@0 { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; /* Direct mapping */ + + ciu2: interrupt-controller@1070100000000 { + compatible = "cavium,octeon-6880-ciu2"; + interrupt-controller; + /* Interrupts are specified by two parts: + * 1) Controller register (0 or 7) + * 2) Bit within the register (0..63) + */ + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x10701 0x00000000 0x0 0x4000000>; + }; + + gpio: gpio-controller@1070000000800 { + #gpio-cells = <2>; + compatible = "cavium,octeon-3860-gpio"; + reg = <0x10700 0x00000800 0x0 0x100>; + gpio-controller; + /* Interrupts are specified by two parts: + * 1) GPIO pin number (0..15) + * 2) Triggering (1 - edge rising + * 2 - edge falling + * 4 - level active high + * 8 - level active low) + */ + interrupt-controller; + #interrupt-cells = <2>; + /* The GPIO pins connect to 16 consecutive CUI bits */ + interrupts = <7 0>, <7 1>, <7 2>, <7 3>, + <7 4>, <7 5>, <7 6>, <7 7>, + <7 8>, <7 9>, <7 10>, <7 11>, + <7 12>, <7 13>, <7 14>, <7 15>; + }; + + smi0: mdio@1180000003800 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00003800 0x0 0x40>; + + phy0: ethernet-phy@6 { + compatible = "marvell,88e1118"; + marvell,reg-init = + /* Fix rx and tx clock transition timing */ + <2 0x15 0xffcf 0>, /* Reg 2,21 Clear bits 4, 5 */ + /* Adjust LED drive. */ + <3 0x11 0 0x442a>, /* Reg 3,17 <- 0442a */ + /* irq, blink-activity, blink-link */ + <3 0x10 0 0x0242>; /* Reg 3,16 <- 0x0242 */ + reg = <6>; + }; + + phy1: ethernet-phy@1 { + cavium,qlm-trim = "4,sgmii"; + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy2: ethernet-phy@2 { + cavium,qlm-trim = "4,sgmii"; + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy3: ethernet-phy@3 { + cavium,qlm-trim = "4,sgmii"; + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy4: ethernet-phy@4 { + cavium,qlm-trim = "4,sgmii"; + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + }; + + smi1: mdio@1180000003880 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00003880 0x0 0x40>; + + phy41: ethernet-phy@1 { + cavium,qlm-trim = "0,sgmii"; + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy42: ethernet-phy@2 { + cavium,qlm-trim = "0,sgmii"; + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy43: ethernet-phy@3 { + cavium,qlm-trim = "0,sgmii"; + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy44: ethernet-phy@4 { + cavium,qlm-trim = "0,sgmii"; + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + }; + + smi2: mdio@1180000003900 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00003900 0x0 0x40>; + + phy21: ethernet-phy@1 { + cavium,qlm-trim = "2,sgmii"; + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy22: ethernet-phy@2 { + cavium,qlm-trim = "2,sgmii"; + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy23: ethernet-phy@3 { + cavium,qlm-trim = "2,sgmii"; + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy24: ethernet-phy@4 { + cavium,qlm-trim = "2,sgmii"; + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + }; + + smi3: mdio@1180000003980 { + compatible = "cavium,octeon-3860-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0x00003980 0x0 0x40>; + + phy11: ethernet-phy@1 { + cavium,qlm-trim = "3,sgmii"; + reg = <1>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy12: ethernet-phy@2 { + cavium,qlm-trim = "3,sgmii"; + reg = <2>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy13: ethernet-phy@3 { + cavium,qlm-trim = "3,sgmii"; + reg = <3>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + phy14: ethernet-phy@4 { + cavium,qlm-trim = "3,sgmii"; + reg = <4>; + compatible = "marvell,88e1149r"; + marvell,reg-init = <3 0x10 0 0x5777>, + <3 0x11 0 0x00aa>, + <3 0x12 0 0x4105>, + <3 0x13 0 0x0a60>; + }; + }; + + mix0: ethernet@1070000100000 { + compatible = "cavium,octeon-5750-mix"; + reg = <0x10700 0x00100000 0x0 0x100>, /* MIX */ + <0x11800 0xE0000000 0x0 0x300>, /* AGL */ + <0x11800 0xE0000400 0x0 0x400>, /* AGL_SHARED */ + <0x11800 0xE0002000 0x0 0x8>; /* AGL_PRT_CTL */ + cell-index = <0>; + interrupts = <6 40>, <6 32>; + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy0>; + }; + + pip: pip@11800a0000000 { + compatible = "cavium,octeon-3860-pip"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x11800 0xa0000000 0x0 0x2000>; + + interface@4 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x4>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy1>; + }; + ethernet@1 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x1>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy2>; + }; + ethernet@2 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x2>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy3>; + }; + ethernet@3 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x3>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy4>; + }; + }; + + interface@3 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy11>; + }; + ethernet@1 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x1>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy12>; + }; + ethernet@2 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x2>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy13>; + }; + ethernet@3 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x3>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy14>; + }; + }; + + interface@2 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy21>; + }; + ethernet@1 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x1>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy22>; + }; + ethernet@2 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x2>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy23>; + }; + ethernet@3 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x3>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy24>; + }; + }; + + interface@1 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + + interface@0 { + compatible = "cavium,octeon-3860-pip-interface"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; /* interface */ + + ethernet@0 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x0>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy41>; + }; + ethernet@1 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x1>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy42>; + }; + ethernet@2 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x2>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy43>; + }; + ethernet@3 { + compatible = "cavium,octeon-3860-pip-port"; + reg = <0x3>; /* Port */ + local-mac-address = [ 00 00 00 00 00 00 ]; + phy-handle = <&phy44>; + }; + }; + }; + + twsi0: i2c@1180000001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cavium,octeon-3860-twsi"; + reg = <0x11800 0x00001000 0x0 0x200>; + interrupts = <3 32>; + clock-frequency = <100000>; + + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; + tmp@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + }; + + twsi1: i2c@1180000001200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cavium,octeon-3860-twsi"; + reg = <0x11800 0x00001200 0x0 0x200>; + interrupts = <3 33>; + clock-frequency = <100000>; + }; + + uart0: serial@1180000000800 { + compatible = "cavium,octeon-3860-uart","ns16550"; + reg = <0x11800 0x00000800 0x0 0x400>; + clock-frequency = <0>; + current-speed = <115200>; + reg-shift = <3>; + interrupts = <3 36>; + }; + + uart1: serial@1180000000c00 { + compatible = "cavium,octeon-3860-uart","ns16550"; + reg = <0x11800 0x00000c00 0x0 0x400>; + clock-frequency = <0>; + current-speed = <115200>; + reg-shift = <3>; + interrupts = <3 37>; + }; + + bootbus: bootbus@1180000000000 { + compatible = "cavium,octeon-3860-bootbus"; + reg = <0x11800 0x00000000 0x0 0x200>; + /* The chip select number and offset */ + #address-cells = <2>; + /* The size of the chip select region */ + #size-cells = <1>; + ranges = <0 0 0 0x1f400000 0xc00000>, + <1 0 0x10000 0x30000000 0>, + <2 0 0x10000 0x40000000 0>, + <3 0 0x10000 0x50000000 0>, + <4 0 0 0x1d020000 0x10000>, + <5 0 0 0x1d040000 0x10000>, + <6 0 0 0x1d050000 0x10000>, + <7 0 0x10000 0x90000000 0>; + + cavium,cs-config@0 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <0>; + cavium,t-adr = <10>; + cavium,t-ce = <50>; + cavium,t-oe = <50>; + cavium,t-we = <35>; + cavium,t-rd-hld = <25>; + cavium,t-wr-hld = <35>; + cavium,t-pause = <0>; + cavium,t-wait = <300>; + cavium,t-page = <25>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <8>; + }; + cavium,cs-config@4 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <4>; + cavium,t-adr = <320>; + cavium,t-ce = <320>; + cavium,t-oe = <320>; + cavium,t-we = <320>; + cavium,t-rd-hld = <320>; + cavium,t-wr-hld = <320>; + cavium,t-pause = <320>; + cavium,t-wait = <320>; + cavium,t-page = <320>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <8>; + }; + cavium,cs-config@5 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <5>; + cavium,t-adr = <0>; + cavium,t-ce = <300>; + cavium,t-oe = <125>; + cavium,t-we = <150>; + cavium,t-rd-hld = <100>; + cavium,t-wr-hld = <300>; + cavium,t-pause = <0>; + cavium,t-wait = <300>; + cavium,t-page = <310>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,bus-width = <16>; + }; + cavium,cs-config@6 { + compatible = "cavium,octeon-3860-bootbus-config"; + cavium,cs-index = <6>; + cavium,t-adr = <0>; + cavium,t-ce = <30>; + cavium,t-oe = <125>; + cavium,t-we = <150>; + cavium,t-rd-hld = <100>; + cavium,t-wr-hld = <30>; + cavium,t-pause = <0>; + cavium,t-wait = <30>; + cavium,t-page = <310>; + cavium,t-rd-dly = <0>; + + cavium,pages = <0>; + cavium,wait-mode; + cavium,bus-width = <16>; + }; + + flash0: nor@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0 0x200000>; + read-only; + }; + partition@200000 { + label = "kernel"; + reg = <0x200000 0x200000>; + }; + partition@400000 { + label = "cramfs"; + reg = <0x400000 0x3fe000>; + }; + partition@7fe000 { + label = "environment"; + reg = <0x7fe000 0x2000>; + read-only; + }; + }; + + led0: led-display@4,0 { + compatible = "avago,hdsp-253x"; + reg = <4 0x20 0x20>, <4 0 0x20>; + }; + + compact-flash@5,0 { + compatible = "cavium,ebt3000-compact-flash"; + reg = <5 0 0x10000>, <6 0 0x10000>; + cavium,bus-width = <16>; + cavium,true-ide; + cavium,dma-engine-handle = <&dma0>; + }; + }; + + dma0: dma-engine@1180000000100 { + compatible = "cavium,octeon-5750-bootbus-dma"; + reg = <0x11800 0x00000100 0x0 0x8>; + interrupts = <0 63>; + }; + dma1: dma-engine@1180000000108 { + compatible = "cavium,octeon-5750-bootbus-dma"; + reg = <0x11800 0x00000108 0x0 0x8>; + interrupts = <0 63>; + }; + + uctl: uctl@118006f000000 { + compatible = "cavium,octeon-6335-uctl"; + reg = <0x11800 0x6f000000 0x0 0x100>; + ranges; /* Direct mapping */ + #address-cells = <2>; + #size-cells = <2>; + /* 12MHz, 24MHz and 48MHz allowed */ + refclk-frequency = <12000000>; + /* Either "crystal" or "external" */ + refclk-type = "crystal"; + + ehci@16f0000000000 { + compatible = "cavium,octeon-6335-ehci","usb-ehci"; + reg = <0x16f00 0x00000000 0x0 0x100>; + interrupts = <3 44>; + big-endian-regs; + }; + ohci@16f0000000400 { + compatible = "cavium,octeon-6335-ohci","usb-ohci"; + reg = <0x16f00 0x00000400 0x0 0x100>; + interrupts = <3 44>; + big-endian-regs; + }; + }; + }; + + aliases { + mix0 = &mix0; + pip = &pip; + smi0 = &smi0; + smi1 = &smi1; + smi2 = &smi2; + smi3 = &smi3; + twsi0 = &twsi0; + twsi1 = &twsi1; + uart0 = &uart0; + uart1 = &uart1; + uctl = &uctl; + led0 = &led0; + flash0 = &flash0; + }; + }; diff --git a/arch/mips/boot/dts/lantiq/Makefile b/arch/mips/boot/dts/lantiq/Makefile new file mode 100644 index 000000000000..0906c62141b9 --- /dev/null +++ b/arch/mips/boot/dts/lantiq/Makefile @@ -0,0 +1,9 @@ +dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/lantiq/danube.dtsi b/arch/mips/boot/dts/lantiq/danube.dtsi new file mode 100644 index 000000000000..d4c59e003708 --- /dev/null +++ b/arch/mips/boot/dts/lantiq/danube.dtsi @@ -0,0 +1,105 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,danube"; + + cpus { + cpu@0 { + compatible = "mips,mips24Kc"; + }; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x120>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xway"; + reg = <0x203000 0x1000>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + }; + + serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + + pci0: pci@E105400 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xE105400 0x400>; /* pci bridge */ + }; + }; +}; diff --git a/arch/mips/boot/dts/lantiq/easy50712.dts b/arch/mips/boot/dts/lantiq/easy50712.dts new file mode 100644 index 000000000000..143b8a37b5e4 --- /dev/null +++ b/arch/mips/boot/dts/lantiq/easy50712.dts @@ -0,0 +1,114 @@ +/dts-v1/; + +/include/ "danube.dtsi" + +/ { + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + }; + + partition@20000 { + label = "linux"; + reg = <0x20000 0x3d0000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x400000>; + }; + }; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + + etop@E180000 { + compatible = "lantiq,etop-xway"; + reg = <0xE180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <73 78>; + phy-mode = "rmii"; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + stp0: stp@E100BB0 { + #gpio-cells = <2>; + compatible = "lantiq,gpio-stp-xway"; + gpio-controller; + reg = <0xE100BB0 0x40>; + + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; + }; + + pci@E105400 { + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 + >; + gpios-reset = <&gpio 21 0>; + req-mask = <0x1>; /* GNT1 */ + }; + + }; +}; diff --git a/arch/mips/boot/dts/mti/Makefile b/arch/mips/boot/dts/mti/Makefile new file mode 100644 index 000000000000..ef1f3dbed033 --- /dev/null +++ b/arch/mips/boot/dts/mti/Makefile @@ -0,0 +1,9 @@ +dtb-$(CONFIG_MIPS_SEAD3) += sead3.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/mti/sead3.dts b/arch/mips/boot/dts/mti/sead3.dts new file mode 100644 index 000000000000..e4b317d414f1 --- /dev/null +++ b/arch/mips/boot/dts/mti/sead3.dts @@ -0,0 +1,22 @@ +/dts-v1/; + +/memreserve/ 0x00000000 0x00001000; // reserved +/memreserve/ 0x00001000 0x000ef000; // ROM data +/memreserve/ 0x000f0000 0x004cc000; // reserved + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mti,sead-3"; + + cpus { + cpu@0 { + compatible = "mti,mips14KEc", "mti,mips14Kc"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x08000000>; + }; +}; diff --git a/arch/mips/boot/dts/netlogic/Makefile b/arch/mips/boot/dts/netlogic/Makefile new file mode 100644 index 000000000000..9868057140b5 --- /dev/null +++ b/arch/mips/boot/dts/netlogic/Makefile @@ -0,0 +1,13 @@ +dtb-$(CONFIG_DT_XLP_EVP) += xlp_evp.dtb +dtb-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb +dtb-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb +dtb-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb +dtb-$(CONFIG_DT_XLP_RVP) += xlp_rvp.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/netlogic/xlp_evp.dts b/arch/mips/boot/dts/netlogic/xlp_evp.dts new file mode 100644 index 000000000000..89ad04808c02 --- /dev/null +++ b/arch/mips/boot/dts/netlogic/xlp_evp.dts @@ -0,0 +1,118 @@ +/* + * XLP8XX Device Tree Source for EVP boards + */ + +/dts-v1/; +/ { + model = "netlogic,XLP-EVP"; + compatible = "netlogic,xlp"; + #address-cells = <2>; + #size-cells = <2>; + + soc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + 1 0 0 0x16000000 0x02000000>; // GBU chipselects + + serial0: serial@30000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x30100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + serial1: serial@31000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x31100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <18>; + }; + i2c0: ocores@32000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x32100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <30>; + }; + i2c1: ocores@33000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x33100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <31>; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + + dtt@4c { + compatible = "national,lm90"; + reg = <0x4c>; + }; + }; + pic: pic@4000 { + compatible = "netlogic,xlp-pic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0 0x4000 0x200>; + interrupt-controller; + }; + + nor_flash@1,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + reg = <1 0 0x1000000>; + + partition@0 { + label = "x-loader"; + reg = <0x0 0x100000>; /* 1M */ + read-only; + }; + + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; /* 1M */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; /* 5M */ + }; + + partition@700000 { + label = "rootfs"; + reg = <0x700000 0x800000>; /* 8M */ + }; + + partition@f00000 { + label = "env"; + reg = <0xf00000 0x100000>; /* 1M */ + read-only; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; + }; +}; diff --git a/arch/mips/boot/dts/netlogic/xlp_fvp.dts b/arch/mips/boot/dts/netlogic/xlp_fvp.dts new file mode 100644 index 000000000000..63e62b7bd758 --- /dev/null +++ b/arch/mips/boot/dts/netlogic/xlp_fvp.dts @@ -0,0 +1,118 @@ +/* + * XLP2XX Device Tree Source for FVP boards + */ + +/dts-v1/; +/ { + model = "netlogic,XLP-FVP"; + compatible = "netlogic,xlp"; + #address-cells = <2>; + #size-cells = <2>; + + soc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + 1 0 0 0x16000000 0x02000000>; // GBU chipselects + + serial0: serial@30000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x30100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + serial1: serial@31000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x31100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <18>; + }; + i2c0: ocores@37100 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x37100 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <30>; + }; + i2c1: ocores@37120 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x37120 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <31>; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + + dtt@4c { + compatible = "national,lm90"; + reg = <0x4c>; + }; + }; + pic: pic@4000 { + compatible = "netlogic,xlp-pic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0 0x4000 0x200>; + interrupt-controller; + }; + + nor_flash@1,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + reg = <1 0 0x1000000>; + + partition@0 { + label = "x-loader"; + reg = <0x0 0x100000>; /* 1M */ + read-only; + }; + + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; /* 1M */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; /* 5M */ + }; + + partition@700000 { + label = "rootfs"; + reg = <0x700000 0x800000>; /* 8M */ + }; + + partition@f00000 { + label = "env"; + reg = <0xf00000 0x100000>; /* 1M */ + read-only; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; + }; +}; diff --git a/arch/mips/boot/dts/netlogic/xlp_gvp.dts b/arch/mips/boot/dts/netlogic/xlp_gvp.dts new file mode 100644 index 000000000000..bb4ecd1d47fc --- /dev/null +++ b/arch/mips/boot/dts/netlogic/xlp_gvp.dts @@ -0,0 +1,77 @@ +/* + * XLP9XX Device Tree Source for GVP boards + */ + +/dts-v1/; +/ { + model = "netlogic,XLP-GVP"; + compatible = "netlogic,xlp"; + #address-cells = <2>; + #size-cells = <2>; + + soc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + 1 0 0 0x16000000 0x02000000>; // GBU chipselects + + serial0: serial@30000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x112100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <125000000>; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + pic: pic@110000 { + compatible = "netlogic,xlp-pic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0 0x110000 0x200>; + interrupt-controller; + }; + + nor_flash@1,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + reg = <1 0 0x1000000>; + + partition@0 { + label = "x-loader"; + reg = <0x0 0x100000>; /* 1M */ + read-only; + }; + + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; /* 1M */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; /* 5M */ + }; + + partition@700000 { + label = "rootfs"; + reg = <0x700000 0x800000>; /* 8M */ + }; + + partition@f00000 { + label = "env"; + reg = <0xf00000 0x100000>; /* 1M */ + read-only; + }; + }; + + }; + + chosen { + bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; + }; +}; diff --git a/arch/mips/boot/dts/netlogic/xlp_rvp.dts b/arch/mips/boot/dts/netlogic/xlp_rvp.dts new file mode 100644 index 000000000000..7188aed2ea2e --- /dev/null +++ b/arch/mips/boot/dts/netlogic/xlp_rvp.dts @@ -0,0 +1,77 @@ +/* + * XLP5XX Device Tree Source for RVP boards + */ + +/dts-v1/; +/ { + model = "netlogic,XLP-RVP"; + compatible = "netlogic,xlp"; + #address-cells = <2>; + #size-cells = <2>; + + soc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + 1 0 0 0x16000000 0x02000000>; // GBU chipselects + + serial0: serial@30000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x112100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <125000000>; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + pic: pic@110000 { + compatible = "netlogic,xlp-pic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0 0x110000 0x200>; + interrupt-controller; + }; + + nor_flash@1,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + reg = <1 0 0x1000000>; + + partition@0 { + label = "x-loader"; + reg = <0x0 0x100000>; /* 1M */ + read-only; + }; + + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; /* 1M */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; /* 5M */ + }; + + partition@700000 { + label = "rootfs"; + reg = <0x700000 0x800000>; /* 8M */ + }; + + partition@f00000 { + label = "env"; + reg = <0xf00000 0x100000>; /* 1M */ + read-only; + }; + }; + + }; + + chosen { + bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; + }; +}; diff --git a/arch/mips/boot/dts/netlogic/xlp_svp.dts b/arch/mips/boot/dts/netlogic/xlp_svp.dts new file mode 100644 index 000000000000..1ebd00edaacc --- /dev/null +++ b/arch/mips/boot/dts/netlogic/xlp_svp.dts @@ -0,0 +1,118 @@ +/* + * XLP3XX Device Tree Source for SVP boards + */ + +/dts-v1/; +/ { + model = "netlogic,XLP-SVP"; + compatible = "netlogic,xlp"; + #address-cells = <2>; + #size-cells = <2>; + + soc { + #address-cells = <2>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG + 1 0 0 0x16000000 0x02000000>; // GBU chipselects + + serial0: serial@30000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x30100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <17>; + }; + serial1: serial@31000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x31100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <133333333>; + interrupt-parent = <&pic>; + interrupts = <18>; + }; + i2c0: ocores@32000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x32100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <30>; + }; + i2c1: ocores@33000 { + compatible = "opencores,i2c-ocores"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x33100 0xa00>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <32000000>; + interrupt-parent = <&pic>; + interrupts = <31>; + + rtc@68 { + compatible = "dallas,ds1374"; + reg = <0x68>; + }; + + dtt@4c { + compatible = "national,lm90"; + reg = <0x4c>; + }; + }; + pic: pic@4000 { + compatible = "netlogic,xlp-pic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <0 0x4000 0x200>; + interrupt-controller; + }; + + nor_flash@1,0 { + compatible = "cfi-flash"; + #address-cells = <1>; + #size-cells = <1>; + bank-width = <2>; + reg = <1 0 0x1000000>; + + partition@0 { + label = "x-loader"; + reg = <0x0 0x100000>; /* 1M */ + read-only; + }; + + partition@100000 { + label = "u-boot"; + reg = <0x100000 0x100000>; /* 1M */ + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x500000>; /* 5M */ + }; + + partition@700000 { + label = "rootfs"; + reg = <0x700000 0x800000>; /* 8M */ + }; + + partition@f00000 { + label = "env"; + reg = <0xf00000 0x100000>; /* 1M */ + read-only; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 rdinit=/sbin/init"; + }; +}; diff --git a/arch/mips/boot/dts/ralink/Makefile b/arch/mips/boot/dts/ralink/Makefile new file mode 100644 index 000000000000..2a7225954bf6 --- /dev/null +++ b/arch/mips/boot/dts/ralink/Makefile @@ -0,0 +1,12 @@ +dtb-$(CONFIG_DTB_RT2880_EVAL) += rt2880_eval.dtb +dtb-$(CONFIG_DTB_RT305X_EVAL) += rt3052_eval.dtb +dtb-$(CONFIG_DTB_RT3883_EVAL) += rt3883_eval.dtb +dtb-$(CONFIG_DTB_MT7620A_EVAL) += mt7620a_eval.dtb + +obj-y += $(patsubst %.dtb, %.dtb.o, $(dtb-y)) + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/ralink/mt7620a.dtsi b/arch/mips/boot/dts/ralink/mt7620a.dtsi new file mode 100644 index 000000000000..08bf24fefe9f --- /dev/null +++ b/arch/mips/boot/dts/ralink/mt7620a.dtsi @@ -0,0 +1,58 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,mtk7620a-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,mt7620a-sysc"; + reg = <0x0 0x100>; + }; + + intc: intc@200 { + compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + uartlite@c00 { + compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; +}; diff --git a/arch/mips/boot/dts/ralink/mt7620a_eval.dts b/arch/mips/boot/dts/ralink/mt7620a_eval.dts new file mode 100644 index 000000000000..709f58132f5c --- /dev/null +++ b/arch/mips/boot/dts/ralink/mt7620a_eval.dts @@ -0,0 +1,17 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc"; + model = "Ralink MT7620A evaluation board"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; +}; diff --git a/arch/mips/boot/dts/ralink/rt2880.dtsi b/arch/mips/boot/dts/ralink/rt2880.dtsi new file mode 100644 index 000000000000..182afde2f2e1 --- /dev/null +++ b/arch/mips/boot/dts/ralink/rt2880.dtsi @@ -0,0 +1,58 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt2880-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips4KEc"; + }; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@300000 { + compatible = "palmbus"; + reg = <0x300000 0x200000>; + ranges = <0x0 0x300000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt2880-sysc"; + reg = <0x0 0x100>; + }; + + intc: intc@200 { + compatible = "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt2880-memc"; + reg = <0x300 0x100>; + }; + + uartlite@c00 { + compatible = "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <8>; + + reg-shift = <2>; + }; + }; +}; diff --git a/arch/mips/boot/dts/ralink/rt2880_eval.dts b/arch/mips/boot/dts/ralink/rt2880_eval.dts new file mode 100644 index 000000000000..0a685db093d4 --- /dev/null +++ b/arch/mips/boot/dts/ralink/rt2880_eval.dts @@ -0,0 +1,47 @@ +/dts-v1/; + +/include/ "rt2880.dtsi" + +/ { + compatible = "ralink,rt2880-eval-board", "ralink,rt2880-soc"; + model = "Ralink RT2880 evaluation board"; + + memory@0 { + device_type = "memory"; + reg = <0x8000000 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x400000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "calibration"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x3b0000>; + }; + }; +}; diff --git a/arch/mips/boot/dts/ralink/rt3050.dtsi b/arch/mips/boot/dts/ralink/rt3050.dtsi new file mode 100644 index 000000000000..e3203d414fee --- /dev/null +++ b/arch/mips/boot/dts/ralink/rt3050.dtsi @@ -0,0 +1,68 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3050-soc", "ralink,rt3052-soc", "ralink,rt3350-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips24KEc"; + }; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + intc: intc@200 { + compatible = "ralink,rt3052-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3052-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + uartlite@c00 { + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; + + usb@101c0000 { + compatible = "ralink,rt3050-usb", "snps,dwc2"; + reg = <0x101c0000 40000>; + + interrupt-parent = <&intc>; + interrupts = <18>; + + status = "disabled"; + }; +}; diff --git a/arch/mips/boot/dts/ralink/rt3052_eval.dts b/arch/mips/boot/dts/ralink/rt3052_eval.dts new file mode 100644 index 000000000000..ec9e9a035541 --- /dev/null +++ b/arch/mips/boot/dts/ralink/rt3052_eval.dts @@ -0,0 +1,51 @@ +/dts-v1/; + +#include "rt3050.dtsi" + +/ { + compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc"; + model = "Ralink RT3052 evaluation board"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + read-only; + }; + partition@30000 { + label = "uboot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + partition@40000 { + label = "calibration"; + reg = <0x40000 0x10000>; + read-only; + }; + partition@50000 { + label = "linux"; + reg = <0x50000 0x7b0000>; + }; + }; + + usb@101c0000 { + status = "ok"; + }; +}; diff --git a/arch/mips/boot/dts/ralink/rt3883.dtsi b/arch/mips/boot/dts/ralink/rt3883.dtsi new file mode 100644 index 000000000000..3b131dd0d5ac --- /dev/null +++ b/arch/mips/boot/dts/ralink/rt3883.dtsi @@ -0,0 +1,58 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ralink,rt3883-soc"; + + cpus { + cpu@0 { + compatible = "mips,mips74Kc"; + }; + }; + + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + compatible = "mti,cpu-interrupt-controller"; + }; + + palmbus@10000000 { + compatible = "palmbus"; + reg = <0x10000000 0x200000>; + ranges = <0x0 0x10000000 0x1FFFFF>; + + #address-cells = <1>; + #size-cells = <1>; + + sysc@0 { + compatible = "ralink,rt3883-sysc", "ralink,rt3050-sysc"; + reg = <0x0 0x100>; + }; + + intc: intc@200 { + compatible = "ralink,rt3883-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + + interrupt-controller; + #interrupt-cells = <1>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>; + }; + + memc@300 { + compatible = "ralink,rt3883-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; + }; + + uartlite@c00 { + compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; +}; diff --git a/arch/mips/boot/dts/ralink/rt3883_eval.dts b/arch/mips/boot/dts/ralink/rt3883_eval.dts new file mode 100644 index 000000000000..e8df21a5d10d --- /dev/null +++ b/arch/mips/boot/dts/ralink/rt3883_eval.dts @@ -0,0 +1,17 @@ +/dts-v1/; + +/include/ "rt3883.dtsi" + +/ { + compatible = "ralink,rt3883-eval-board", "ralink,rt3883-soc"; + model = "Ralink RT3883 evaluation board"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; +}; |