diff options
Diffstat (limited to 'arch/mips/alchemy')
51 files changed, 2632 insertions, 1463 deletions
diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 00b498e97c83..df3b1a7eb15d 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -1,5 +1,5 @@ -# au1000-style gpio -config ALCHEMY_GPIO_AU1000 +# au1000-style gpio and interrupt controllers +config ALCHEMY_GPIOINT_AU1000 bool # select this in your board config if you don't want to use the gpio @@ -20,12 +20,14 @@ config MIPS_MTX1 select HW_HAS_PCI select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_BOSPORUS bool "Alchemy Bosporus board" select SOC_AU1500 select DMA_NONCOHERENT select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1000 bool "Alchemy DB1000 board" @@ -33,12 +35,14 @@ config MIPS_DB1000 select DMA_NONCOHERENT select HW_HAS_PCI select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1100 bool "Alchemy DB1100 board" select SOC_AU1100 select DMA_NONCOHERENT select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1200 bool "Alchemy DB1200 board" @@ -46,6 +50,7 @@ config MIPS_DB1200 select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1500 bool "Alchemy DB1500 board" @@ -55,6 +60,7 @@ config MIPS_DB1500 select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1550 bool "Alchemy DB1550 board" @@ -63,12 +69,14 @@ config MIPS_DB1550 select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_MIRAGE bool "Alchemy Mirage board" select DMA_NONCOHERENT select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1000 bool "Alchemy PB1000 board" @@ -77,6 +85,7 @@ config MIPS_PB1000 select HW_HAS_PCI select SWAP_IO_SPACE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1100 bool "Alchemy PB1100 board" @@ -85,6 +94,7 @@ config MIPS_PB1100 select HW_HAS_PCI select SWAP_IO_SPACE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1200 bool "Alchemy PB1200 board" @@ -92,6 +102,7 @@ config MIPS_PB1200 select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1500 bool "Alchemy PB1500 board" @@ -99,6 +110,7 @@ config MIPS_PB1500 select DMA_NONCOHERENT select HW_HAS_PCI select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1550 bool "Alchemy PB1550 board" @@ -107,39 +119,41 @@ config MIPS_PB1550 select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_XXS1500 bool "MyCable XXS1500 board" select DMA_NONCOHERENT select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK endchoice config SOC_AU1000 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1100 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1500 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1550 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1200 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1X00 bool diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index b67fb512529d..06c0e65a54b5 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -5,14 +5,15 @@ # Makefile for the Alchemy Au1xx0 CPUs, generic files. # -obj-y += prom.o irq.o puts.o time.o reset.o \ - clocks.o platform.o power.o setup.o \ +obj-y += prom.o time.o clocks.o platform.o power.o setup.o \ sleeper.o dma.o dbdma.o +obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o + # optional gpiolib support ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) ifeq ($(CONFIG_GPIOLIB),y) - obj-$(CONFIG_ALCHEMY_GPIO_AU1000) += gpiolib-au1000.o + obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o endif endif diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c index d8991854530e..460c6285c1bb 100644 --- a/arch/mips/alchemy/common/clocks.c +++ b/arch/mips/alchemy/common/clocks.c @@ -40,8 +40,6 @@ static unsigned int au1x00_clock; /* Hz */ static unsigned long uart_baud_base; -static DEFINE_SPINLOCK(time_lock); - /* * Set the au1000_clock */ @@ -84,9 +82,6 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base) unsigned long au1xxx_calc_clock(void) { unsigned long cpu_speed; - unsigned long flags; - - spin_lock_irqsave(&time_lock, flags); /* * On early Au1000, sys_cpupll was write-only. Since these @@ -108,8 +103,6 @@ unsigned long au1xxx_calc_clock(void) set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2) * 16)); - spin_unlock_irqrestore(&time_lock, flags); - set_au1x00_speed(cpu_speed); return cpu_speed; diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index 5c68569344c1..ca0506a8585a 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -30,11 +30,13 @@ * */ +#include <linux/init.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/module.h> +#include <linux/sysdev.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> @@ -58,7 +60,6 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; static int dbdma_initialized; -static void au1xxx_dbdma_init(void); static dbdev_tab_t dbdev_tab[] = { #ifdef CONFIG_SOC_AU1550 @@ -174,10 +175,6 @@ static dbdev_tab_t dbdev_tab[] = { #define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab) -#ifdef CONFIG_PM -static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6]; -#endif - static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS]; @@ -237,7 +234,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, void (*callback)(int, void *), void *callparam) { unsigned long flags; - u32 used, chan, rv; + u32 used, chan; u32 dcp; int i; dbdev_tab_t *stp, *dtp; @@ -250,8 +247,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, * which can't be done successfully during board set up. */ if (!dbdma_initialized) - au1xxx_dbdma_init(); - dbdma_initialized = 1; + return 0; stp = find_dbdev_id(srcid); if (stp == NULL) @@ -261,7 +257,6 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, return 0; used = 0; - rv = 0; /* Check to see if we can get both channels. */ spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); @@ -282,63 +277,65 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, used++; spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); - if (!used) { - /* Let's see if we can allocate a channel for it. */ - ctp = NULL; - chan = 0; - spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); - for (i = 0; i < NUM_DBDMA_CHANS; i++) - if (chan_tab_ptr[i] == NULL) { - /* - * If kmalloc fails, it is caught below same - * as a channel not available. - */ - ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC); - chan_tab_ptr[i] = ctp; - break; - } - spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); - - if (ctp != NULL) { - memset(ctp, 0, sizeof(chan_tab_t)); - ctp->chan_index = chan = i; - dcp = DDMA_CHANNEL_BASE; - dcp += (0x0100 * chan); - ctp->chan_ptr = (au1x_dma_chan_t *)dcp; - cp = (au1x_dma_chan_t *)dcp; - ctp->chan_src = stp; - ctp->chan_dest = dtp; - ctp->chan_callback = callback; - ctp->chan_callparam = callparam; - - /* Initialize channel configuration. */ - i = 0; - if (stp->dev_intlevel) - i |= DDMA_CFG_SED; - if (stp->dev_intpolarity) - i |= DDMA_CFG_SP; - if (dtp->dev_intlevel) - i |= DDMA_CFG_DED; - if (dtp->dev_intpolarity) - i |= DDMA_CFG_DP; - if ((stp->dev_flags & DEV_FLAGS_SYNC) || - (dtp->dev_flags & DEV_FLAGS_SYNC)) - i |= DDMA_CFG_SYNC; - cp->ddma_cfg = i; - au_sync(); + if (used) + return 0; - /* Return a non-zero value that can be used to - * find the channel information in subsequent - * operations. + /* Let's see if we can allocate a channel for it. */ + ctp = NULL; + chan = 0; + spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); + for (i = 0; i < NUM_DBDMA_CHANS; i++) + if (chan_tab_ptr[i] == NULL) { + /* + * If kmalloc fails, it is caught below same + * as a channel not available. */ - rv = (u32)(&chan_tab_ptr[chan]); - } else { - /* Release devices */ - stp->dev_flags &= ~DEV_FLAGS_INUSE; - dtp->dev_flags &= ~DEV_FLAGS_INUSE; + ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC); + chan_tab_ptr[i] = ctp; + break; } + spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); + + if (ctp != NULL) { + memset(ctp, 0, sizeof(chan_tab_t)); + ctp->chan_index = chan = i; + dcp = DDMA_CHANNEL_BASE; + dcp += (0x0100 * chan); + ctp->chan_ptr = (au1x_dma_chan_t *)dcp; + cp = (au1x_dma_chan_t *)dcp; + ctp->chan_src = stp; + ctp->chan_dest = dtp; + ctp->chan_callback = callback; + ctp->chan_callparam = callparam; + + /* Initialize channel configuration. */ + i = 0; + if (stp->dev_intlevel) + i |= DDMA_CFG_SED; + if (stp->dev_intpolarity) + i |= DDMA_CFG_SP; + if (dtp->dev_intlevel) + i |= DDMA_CFG_DED; + if (dtp->dev_intpolarity) + i |= DDMA_CFG_DP; + if ((stp->dev_flags & DEV_FLAGS_SYNC) || + (dtp->dev_flags & DEV_FLAGS_SYNC)) + i |= DDMA_CFG_SYNC; + cp->ddma_cfg = i; + au_sync(); + + /* + * Return a non-zero value that can be used to find the channel + * information in subsequent operations. + */ + return (u32)(&chan_tab_ptr[chan]); } - return rv; + + /* Release devices */ + stp->dev_flags &= ~DEV_FLAGS_INUSE; + dtp->dev_flags &= ~DEV_FLAGS_INUSE; + + return 0; } EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); @@ -412,8 +409,11 @@ u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries) if (desc_base == 0) return 0; + ctp->cdb_membase = desc_base; desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t)); - } + } else + ctp->cdb_membase = desc_base; + dp = (au1x_ddma_desc_t *)desc_base; /* Keep track of the base descriptor. */ @@ -569,7 +569,7 @@ EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); * This updates the source pointer and byte count. Normally used * for memory to fifo transfers. */ -u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) +u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -595,7 +595,7 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) return 0; /* Load up buffer address and byte count. */ - dp->dscr_source0 = virt_to_phys(buf); + dp->dscr_source0 = buf & ~0UL; dp->dscr_cmd1 = nbytes; /* Check flags */ if (flags & DDMA_FLAGS_IE) @@ -622,14 +622,13 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) /* Return something non-zero. */ return nbytes; } -EXPORT_SYMBOL(_au1xxx_dbdma_put_source); +EXPORT_SYMBOL(au1xxx_dbdma_put_source); /* Put a destination buffer into the DMA ring. * This updates the destination pointer and byte count. Normally used * to place an empty buffer into the ring for fifo to memory transfers. */ -u32 -_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) +u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -659,7 +658,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) if (flags & DDMA_FLAGS_NOIE) dp->dscr_cmd0 &= ~DSCR_CMD0_IE; - dp->dscr_dest0 = virt_to_phys(buf); + dp->dscr_dest0 = buf & ~0UL; dp->dscr_cmd1 = nbytes; #if 0 printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", @@ -685,7 +684,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) /* Return something non-zero. */ return nbytes; } -EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); +EXPORT_SYMBOL(au1xxx_dbdma_put_dest); /* * Get a destination buffer into the DMA ring. @@ -831,7 +830,7 @@ void au1xxx_dbdma_chan_free(u32 chanid) au1xxx_dbdma_stop(chanid); - kfree((void *)ctp->chan_desc_base); + kfree((void *)ctp->cdb_membase); stp->dev_flags &= ~DEV_FLAGS_INUSE; dtp->dev_flags &= ~DEV_FLAGS_INUSE; @@ -868,28 +867,6 @@ static irqreturn_t dbdma_interrupt(int irq, void *dev_id) return IRQ_RETVAL(1); } -static void au1xxx_dbdma_init(void) -{ - int irq_nr; - - dbdma_gptr->ddma_config = 0; - dbdma_gptr->ddma_throttle = 0; - dbdma_gptr->ddma_inten = 0xffff; - au_sync(); - -#if defined(CONFIG_SOC_AU1550) - irq_nr = AU1550_DDMA_INT; -#elif defined(CONFIG_SOC_AU1200) - irq_nr = AU1200_DDMA_INT; -#else - #error Unknown Au1x00 SOC -#endif - - if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, - "Au1xxx dbdma", (void *)dbdma_gptr)) - printk(KERN_ERR "Can't get 1550 dbdma irq"); -} - void au1xxx_dbdma_dump(u32 chanid) { chan_tab_t *ctp; @@ -903,7 +880,7 @@ void au1xxx_dbdma_dump(u32 chanid) dtp = ctp->chan_dest; cp = ctp->chan_ptr; - printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n", + printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n", (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, dtp - dbdev_tab); printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n", @@ -980,29 +957,37 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr) return nbytes; } -#ifdef CONFIG_PM -void au1xxx_dbdma_suspend(void) + +struct alchemy_dbdma_sysdev { + struct sys_device sysdev; + u32 pm_regs[NUM_DBDMA_CHANS + 1][6]; +}; + +static int alchemy_dbdma_suspend(struct sys_device *dev, + pm_message_t state) { + struct alchemy_dbdma_sysdev *sdev = + container_of(dev, struct alchemy_dbdma_sysdev, sysdev); int i; u32 addr; addr = DDMA_GLOBAL_BASE; - au1xxx_dbdma_pm_regs[0][0] = au_readl(addr + 0x00); - au1xxx_dbdma_pm_regs[0][1] = au_readl(addr + 0x04); - au1xxx_dbdma_pm_regs[0][2] = au_readl(addr + 0x08); - au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c); + sdev->pm_regs[0][0] = au_readl(addr + 0x00); + sdev->pm_regs[0][1] = au_readl(addr + 0x04); + sdev->pm_regs[0][2] = au_readl(addr + 0x08); + sdev->pm_regs[0][3] = au_readl(addr + 0x0c); /* save channel configurations */ for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { - au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00); - au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04); - au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08); - au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c); - au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10); - au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14); + sdev->pm_regs[i][0] = au_readl(addr + 0x00); + sdev->pm_regs[i][1] = au_readl(addr + 0x04); + sdev->pm_regs[i][2] = au_readl(addr + 0x08); + sdev->pm_regs[i][3] = au_readl(addr + 0x0c); + sdev->pm_regs[i][4] = au_readl(addr + 0x10); + sdev->pm_regs[i][5] = au_readl(addr + 0x14); /* halt channel */ - au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00); + au_writel(sdev->pm_regs[i][0] & ~1, addr + 0x00); au_sync(); while (!(au_readl(addr + 0x14) & 1)) au_sync(); @@ -1012,30 +997,102 @@ void au1xxx_dbdma_suspend(void) /* disable channel interrupts */ au_writel(0, DDMA_GLOBAL_BASE + 0x0c); au_sync(); + + return 0; } -void au1xxx_dbdma_resume(void) +static int alchemy_dbdma_resume(struct sys_device *dev) { + struct alchemy_dbdma_sysdev *sdev = + container_of(dev, struct alchemy_dbdma_sysdev, sysdev); int i; u32 addr; addr = DDMA_GLOBAL_BASE; - au_writel(au1xxx_dbdma_pm_regs[0][0], addr + 0x00); - au_writel(au1xxx_dbdma_pm_regs[0][1], addr + 0x04); - au_writel(au1xxx_dbdma_pm_regs[0][2], addr + 0x08); - au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c); + au_writel(sdev->pm_regs[0][0], addr + 0x00); + au_writel(sdev->pm_regs[0][1], addr + 0x04); + au_writel(sdev->pm_regs[0][2], addr + 0x08); + au_writel(sdev->pm_regs[0][3], addr + 0x0c); /* restore channel configurations */ for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) { - au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00); - au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04); - au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08); - au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c); - au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10); - au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14); + au_writel(sdev->pm_regs[i][0], addr + 0x00); + au_writel(sdev->pm_regs[i][1], addr + 0x04); + au_writel(sdev->pm_regs[i][2], addr + 0x08); + au_writel(sdev->pm_regs[i][3], addr + 0x0c); + au_writel(sdev->pm_regs[i][4], addr + 0x10); + au_writel(sdev->pm_regs[i][5], addr + 0x14); au_sync(); addr += 0x100; /* next channel base */ } + + return 0; +} + +static struct sysdev_class alchemy_dbdma_sysdev_class = { + .name = "dbdma", + .suspend = alchemy_dbdma_suspend, + .resume = alchemy_dbdma_resume, +}; + +static int __init alchemy_dbdma_sysdev_init(void) +{ + struct alchemy_dbdma_sysdev *sdev; + int ret; + + ret = sysdev_class_register(&alchemy_dbdma_sysdev_class); + if (ret) + return ret; + + sdev = kzalloc(sizeof(struct alchemy_dbdma_sysdev), GFP_KERNEL); + if (!sdev) + return -ENOMEM; + + sdev->sysdev.id = -1; + sdev->sysdev.cls = &alchemy_dbdma_sysdev_class; + ret = sysdev_register(&sdev->sysdev); + if (ret) + kfree(sdev); + + return ret; +} + +static int __init au1xxx_dbdma_init(void) +{ + int irq_nr, ret; + + dbdma_gptr->ddma_config = 0; + dbdma_gptr->ddma_throttle = 0; + dbdma_gptr->ddma_inten = 0xffff; + au_sync(); + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1550: + irq_nr = AU1550_DDMA_INT; + break; + case ALCHEMY_CPU_AU1200: + irq_nr = AU1200_DDMA_INT; + break; + default: + return -ENODEV; + } + + ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, + "Au1xxx dbdma", (void *)dbdma_gptr); + if (ret) + printk(KERN_ERR "Cannot grab DBDMA interrupt!\n"); + else { + dbdma_initialized = 1; + printk(KERN_INFO "Alchemy DBDMA initialized\n"); + ret = alchemy_dbdma_sysdev_init(); + if (ret) { + printk(KERN_ERR "DBDMA PM init failed\n"); + ret = 0; + } + } + + return ret; } -#endif /* CONFIG_PM */ +subsys_initcall(au1xxx_dbdma_init); + #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c index d6fbda232e6a..d5278877891d 100644 --- a/arch/mips/alchemy/common/dma.c +++ b/arch/mips/alchemy/common/dma.c @@ -29,6 +29,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. * */ + +#include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> @@ -188,17 +190,14 @@ int request_au1000_dma(int dev_id, const char *dev_str, dev = &dma_dev_table[dev_id]; if (irqhandler) { - chan->irq = AU1000_DMA_INT_BASE + i; chan->irq_dev = irq_dev_id; ret = request_irq(chan->irq, irqhandler, irqflags, dev_str, chan->irq_dev); if (ret) { - chan->irq = 0; chan->irq_dev = NULL; return ret; } } else { - chan->irq = 0; chan->irq_dev = NULL; } @@ -226,13 +225,40 @@ void free_au1000_dma(unsigned int dmanr) } disable_dma(dmanr); - if (chan->irq) + if (chan->irq_dev) free_irq(chan->irq, chan->irq_dev); - chan->irq = 0; chan->irq_dev = NULL; chan->dev_id = -1; } EXPORT_SYMBOL(free_au1000_dma); +static int __init au1000_dma_init(void) +{ + int base, i; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + base = AU1000_DMA_INT_BASE; + break; + case ALCHEMY_CPU_AU1500: + base = AU1500_DMA_INT_BASE; + break; + case ALCHEMY_CPU_AU1100: + base = AU1100_DMA_INT_BASE; + break; + default: + goto out; + } + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) + au1000_dma_table[i].irq = base + i; + + printk(KERN_INFO "Alchemy DMA initialized\n"); + +out: + return 0; +} +arch_initcall(au1000_dma_init); + #endif /* AU1000 AU1500 AU1100 */ diff --git a/arch/mips/alchemy/common/gpiolib-au1000.c b/arch/mips/alchemy/common/gpiolib-au1000.c index 1bfa91f939f4..c8e1a94d4a95 100644 --- a/arch/mips/alchemy/common/gpiolib-au1000.c +++ b/arch/mips/alchemy/common/gpiolib-au1000.c @@ -36,7 +36,6 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/gpio.h> -#if !defined(CONFIG_SOC_AU1000) static int gpio2_get(struct gpio_chip *chip, unsigned offset) { return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE); @@ -63,7 +62,7 @@ static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset) { return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE); } -#endif /* !defined(CONFIG_SOC_AU1000) */ + static int gpio1_get(struct gpio_chip *chip, unsigned offset) { @@ -104,7 +103,6 @@ struct gpio_chip alchemy_gpio_chip[] = { .base = ALCHEMY_GPIO1_BASE, .ngpio = ALCHEMY_GPIO1_NUM, }, -#if !defined(CONFIG_SOC_AU1000) [1] = { .label = "alchemy-gpio2", .direction_input = gpio2_direction_input, @@ -115,15 +113,13 @@ struct gpio_chip alchemy_gpio_chip[] = { .base = ALCHEMY_GPIO2_BASE, .ngpio = ALCHEMY_GPIO2_NUM, }, -#endif }; static int __init alchemy_gpiolib_init(void) { gpiochip_add(&alchemy_gpio_chip[0]); -#if !defined(CONFIG_SOC_AU1000) - gpiochip_add(&alchemy_gpio_chip[1]); -#endif + if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000) + gpiochip_add(&alchemy_gpio_chip[1]); return 0; } diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index d670928afcfd..9f78ada83b3c 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -29,6 +29,8 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/slab.h> +#include <linux/sysdev.h> #include <asm/irq_cpu.h> #include <asm/mipsregs.h> @@ -39,253 +41,181 @@ static int au1x_ic_settype(unsigned int irq, unsigned int flow_type); +/* NOTE on interrupt priorities: The original writers of this code said: + * + * Because of the tight timing of SETUP token to reply transactions, + * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT) + * needs the highest priority. + */ + /* per-processor fixed function irqs */ -struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = { - -#if defined(CONFIG_SOC_AU1000) - { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, - -#elif defined(CONFIG_SOC_AU1500) - - { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, - -#elif defined(CONFIG_SOC_AU1100) - - { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, +struct au1xxx_irqmap { + int im_irq; + int im_type; + int im_request; /* set 1 to get higher priority */ +}; + +struct au1xxx_irqmap au1000_irqmap[] __initdata = { + { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, - -#elif defined(CONFIG_SOC_AU1550) - - { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - -#elif defined(CONFIG_SOC_AU1200) - - { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - -#else -#error "Error: Unknown Alchemy SOC" -#endif + { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { -1, }, }; +struct au1xxx_irqmap au1500_irqmap[] __initdata = { + { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, + { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { -1, }, +}; -#ifdef CONFIG_PM +struct au1xxx_irqmap au1100_irqmap[] __initdata = { + { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, + { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { -1, }, +}; -/* - * Save/restore the interrupt controller state. - * Called from the save/restore core registers as part of the - * au_sleep function in power.c.....maybe I should just pm_register() - * them instead? - */ -static unsigned int sleep_intctl_config0[2]; -static unsigned int sleep_intctl_config1[2]; -static unsigned int sleep_intctl_config2[2]; -static unsigned int sleep_intctl_src[2]; -static unsigned int sleep_intctl_assign[2]; -static unsigned int sleep_intctl_wake[2]; -static unsigned int sleep_intctl_mask[2]; - -void save_au1xxx_intctl(void) -{ - sleep_intctl_config0[0] = au_readl(IC0_CFG0RD); - sleep_intctl_config1[0] = au_readl(IC0_CFG1RD); - sleep_intctl_config2[0] = au_readl(IC0_CFG2RD); - sleep_intctl_src[0] = au_readl(IC0_SRCRD); - sleep_intctl_assign[0] = au_readl(IC0_ASSIGNRD); - sleep_intctl_wake[0] = au_readl(IC0_WAKERD); - sleep_intctl_mask[0] = au_readl(IC0_MASKRD); - - sleep_intctl_config0[1] = au_readl(IC1_CFG0RD); - sleep_intctl_config1[1] = au_readl(IC1_CFG1RD); - sleep_intctl_config2[1] = au_readl(IC1_CFG2RD); - sleep_intctl_src[1] = au_readl(IC1_SRCRD); - sleep_intctl_assign[1] = au_readl(IC1_ASSIGNRD); - sleep_intctl_wake[1] = au_readl(IC1_WAKERD); - sleep_intctl_mask[1] = au_readl(IC1_MASKRD); -} +struct au1xxx_irqmap au1550_irqmap[] __initdata = { + { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, + { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { -1, }, +}; -/* - * For most restore operations, we clear the entire register and - * then set the bits we found during the save. - */ -void restore_au1xxx_intctl(void) -{ - au_writel(0xffffffff, IC0_MASKCLR); au_sync(); - - au_writel(0xffffffff, IC0_CFG0CLR); au_sync(); - au_writel(sleep_intctl_config0[0], IC0_CFG0SET); au_sync(); - au_writel(0xffffffff, IC0_CFG1CLR); au_sync(); - au_writel(sleep_intctl_config1[0], IC0_CFG1SET); au_sync(); - au_writel(0xffffffff, IC0_CFG2CLR); au_sync(); - au_writel(sleep_intctl_config2[0], IC0_CFG2SET); au_sync(); - au_writel(0xffffffff, IC0_SRCCLR); au_sync(); - au_writel(sleep_intctl_src[0], IC0_SRCSET); au_sync(); - au_writel(0xffffffff, IC0_ASSIGNCLR); au_sync(); - au_writel(sleep_intctl_assign[0], IC0_ASSIGNSET); au_sync(); - au_writel(0xffffffff, IC0_WAKECLR); au_sync(); - au_writel(sleep_intctl_wake[0], IC0_WAKESET); au_sync(); - au_writel(0xffffffff, IC0_RISINGCLR); au_sync(); - au_writel(0xffffffff, IC0_FALLINGCLR); au_sync(); - au_writel(0x00000000, IC0_TESTBIT); au_sync(); - - au_writel(0xffffffff, IC1_MASKCLR); au_sync(); - - au_writel(0xffffffff, IC1_CFG0CLR); au_sync(); - au_writel(sleep_intctl_config0[1], IC1_CFG0SET); au_sync(); - au_writel(0xffffffff, IC1_CFG1CLR); au_sync(); - au_writel(sleep_intctl_config1[1], IC1_CFG1SET); au_sync(); - au_writel(0xffffffff, IC1_CFG2CLR); au_sync(); - au_writel(sleep_intctl_config2[1], IC1_CFG2SET); au_sync(); - au_writel(0xffffffff, IC1_SRCCLR); au_sync(); - au_writel(sleep_intctl_src[1], IC1_SRCSET); au_sync(); - au_writel(0xffffffff, IC1_ASSIGNCLR); au_sync(); - au_writel(sleep_intctl_assign[1], IC1_ASSIGNSET); au_sync(); - au_writel(0xffffffff, IC1_WAKECLR); au_sync(); - au_writel(sleep_intctl_wake[1], IC1_WAKESET); au_sync(); - au_writel(0xffffffff, IC1_RISINGCLR); au_sync(); - au_writel(0xffffffff, IC1_FALLINGCLR); au_sync(); - au_writel(0x00000000, IC1_TESTBIT); au_sync(); - - au_writel(sleep_intctl_mask[1], IC1_MASKSET); au_sync(); - - au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync(); -} -#endif /* CONFIG_PM */ +struct au1xxx_irqmap au1200_irqmap[] __initdata = { + { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { -1, }, +}; static void au1x_ic0_unmask(unsigned int irq_nr) @@ -306,7 +236,7 @@ static void au1x_ic1_unmask(unsigned int irq_nr) * nowhere in the current kernel sources is it disabled. --mlau */ #if defined(CONFIG_MIPS_PB1000) - if (irq_nr == AU1000_GPIO_15) + if (irq_nr == AU1000_GPIO15_INT) au_writel(0x4000, PB1000_MDR); /* enable int */ #endif au_sync(); @@ -378,11 +308,13 @@ static void au1x_ic1_maskack(unsigned int irq_nr) static int au1x_ic1_setwake(unsigned int irq, unsigned int on) { - unsigned int bit = irq - AU1000_INTC1_INT_BASE; + int bit = irq - AU1000_INTC1_INT_BASE; unsigned long wakemsk, flags; - /* only GPIO 0-7 can act as wakeup source: */ - if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7)) + /* only GPIO 0-7 can act as wakeup source. Fortunately these + * are wired up identically on all supported variants. + */ + if ((bit < 0) || (bit > 7)) return -EINVAL; local_irq_save(flags); @@ -504,11 +436,11 @@ static int au1x_ic_settype(unsigned int irq, unsigned int flow_type) asmlinkage void plat_irq_dispatch(void) { unsigned int pending = read_c0_status() & read_c0_cause(); - unsigned long s, off, bit; + unsigned long s, off; if (pending & CAUSEF_IP7) { - do_IRQ(MIPS_CPU_IRQ_BASE + 7); - return; + off = MIPS_CPU_IRQ_BASE + 7; + goto handle; } else if (pending & CAUSEF_IP2) { s = IC0_REQ0INT; off = AU1000_INTC0_INT_BASE; @@ -524,58 +456,20 @@ asmlinkage void plat_irq_dispatch(void) } else goto spurious; - bit = 0; s = au_readl(s); if (unlikely(!s)) { spurious: spurious_interrupt(); return; } -#ifdef AU1000_USB_DEV_REQ_INT - /* - * Because of the tight timing of SETUP token to reply - * transactions, the USB devices-side packet complete - * interrupt needs the highest priority. - */ - bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE); - if ((pending & CAUSEF_IP2) && (s & bit)) { - do_IRQ(AU1000_USB_DEV_REQ_INT); - return; - } -#endif - do_IRQ(__ffs(s) + off); + off += __ffs(s); +handle: + do_IRQ(off); } -/* setup edge/level and assign request 0/1 */ -void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count) +static void __init au1000_init_irq(struct au1xxx_irqmap *map) { unsigned int bit, irq_nr; - - while (count--) { - irq_nr = map[count].im_irq; - - if (((irq_nr < AU1000_INTC0_INT_BASE) || - (irq_nr >= AU1000_INTC0_INT_BASE + 32)) && - ((irq_nr < AU1000_INTC1_INT_BASE) || - (irq_nr >= AU1000_INTC1_INT_BASE + 32))) - continue; - - if (irq_nr >= AU1000_INTC1_INT_BASE) { - bit = irq_nr - AU1000_INTC1_INT_BASE; - if (map[count].im_request) - au_writel(1 << bit, IC1_ASSIGNCLR); - } else { - bit = irq_nr - AU1000_INTC0_INT_BASE; - if (map[count].im_request) - au_writel(1 << bit, IC0_ASSIGNCLR); - } - - au1x_ic_settype(irq_nr, map[count].im_type); - } -} - -void __init arch_init_irq(void) -{ int i; /* @@ -585,7 +479,7 @@ void __init arch_init_irq(void) au_writel(0xffffffff, IC0_CFG1CLR); au_writel(0xffffffff, IC0_CFG2CLR); au_writel(0xffffffff, IC0_MASKCLR); - au_writel(0xffffffff, IC0_ASSIGNSET); + au_writel(0xffffffff, IC0_ASSIGNCLR); au_writel(0xffffffff, IC0_WAKECLR); au_writel(0xffffffff, IC0_SRCSET); au_writel(0xffffffff, IC0_FALLINGCLR); @@ -596,7 +490,7 @@ void __init arch_init_irq(void) au_writel(0xffffffff, IC1_CFG1CLR); au_writel(0xffffffff, IC1_CFG2CLR); au_writel(0xffffffff, IC1_MASKCLR); - au_writel(0xffffffff, IC1_ASSIGNSET); + au_writel(0xffffffff, IC1_ASSIGNCLR); au_writel(0xffffffff, IC1_WAKECLR); au_writel(0xffffffff, IC1_SRCSET); au_writel(0xffffffff, IC1_FALLINGCLR); @@ -619,11 +513,131 @@ void __init arch_init_irq(void) /* * Initialize IC0, which is fixed per processor. */ - au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map)); + while (map->im_irq != -1) { + irq_nr = map->im_irq; - /* Boards can register additional (GPIO-based) IRQs. - */ - board_init_irq(); + if (irq_nr >= AU1000_INTC1_INT_BASE) { + bit = irq_nr - AU1000_INTC1_INT_BASE; + if (map->im_request) + au_writel(1 << bit, IC1_ASSIGNSET); + } else { + bit = irq_nr - AU1000_INTC0_INT_BASE; + if (map->im_request) + au_writel(1 << bit, IC0_ASSIGNSET); + } + + au1x_ic_settype(irq_nr, map->im_type); + ++map; + } set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3); } + +void __init arch_init_irq(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + au1000_init_irq(au1000_irqmap); + break; + case ALCHEMY_CPU_AU1500: + au1000_init_irq(au1500_irqmap); + break; + case ALCHEMY_CPU_AU1100: + au1000_init_irq(au1100_irqmap); + break; + case ALCHEMY_CPU_AU1550: + au1000_init_irq(au1550_irqmap); + break; + case ALCHEMY_CPU_AU1200: + au1000_init_irq(au1200_irqmap); + break; + } +} + +struct alchemy_ic_sysdev { + struct sys_device sysdev; + void __iomem *base; + unsigned long pmdata[7]; +}; + +static int alchemy_ic_suspend(struct sys_device *dev, pm_message_t state) +{ + struct alchemy_ic_sysdev *icdev = + container_of(dev, struct alchemy_ic_sysdev, sysdev); + + icdev->pmdata[0] = __raw_readl(icdev->base + IC_CFG0RD); + icdev->pmdata[1] = __raw_readl(icdev->base + IC_CFG1RD); + icdev->pmdata[2] = __raw_readl(icdev->base + IC_CFG2RD); + icdev->pmdata[3] = __raw_readl(icdev->base + IC_SRCRD); + icdev->pmdata[4] = __raw_readl(icdev->base + IC_ASSIGNRD); + icdev->pmdata[5] = __raw_readl(icdev->base + IC_WAKERD); + icdev->pmdata[6] = __raw_readl(icdev->base + IC_MASKRD); + + return 0; +} + +static int alchemy_ic_resume(struct sys_device *dev) +{ + struct alchemy_ic_sysdev *icdev = + container_of(dev, struct alchemy_ic_sysdev, sysdev); + + __raw_writel(0xffffffff, icdev->base + IC_MASKCLR); + __raw_writel(0xffffffff, icdev->base + IC_CFG0CLR); + __raw_writel(0xffffffff, icdev->base + IC_CFG1CLR); + __raw_writel(0xffffffff, icdev->base + IC_CFG2CLR); + __raw_writel(0xffffffff, icdev->base + IC_SRCCLR); + __raw_writel(0xffffffff, icdev->base + IC_ASSIGNCLR); + __raw_writel(0xffffffff, icdev->base + IC_WAKECLR); + __raw_writel(0xffffffff, icdev->base + IC_RISINGCLR); + __raw_writel(0xffffffff, icdev->base + IC_FALLINGCLR); + __raw_writel(0x00000000, icdev->base + IC_TESTBIT); + wmb(); + __raw_writel(icdev->pmdata[0], icdev->base + IC_CFG0SET); + __raw_writel(icdev->pmdata[1], icdev->base + IC_CFG1SET); + __raw_writel(icdev->pmdata[2], icdev->base + IC_CFG2SET); + __raw_writel(icdev->pmdata[3], icdev->base + IC_SRCSET); + __raw_writel(icdev->pmdata[4], icdev->base + IC_ASSIGNSET); + __raw_writel(icdev->pmdata[5], icdev->base + IC_WAKESET); + wmb(); + + __raw_writel(icdev->pmdata[6], icdev->base + IC_MASKSET); + wmb(); + + return 0; +} + +static struct sysdev_class alchemy_ic_sysdev_class = { + .name = "ic", + .suspend = alchemy_ic_suspend, + .resume = alchemy_ic_resume, +}; + +static int __init alchemy_ic_sysdev_init(void) +{ + struct alchemy_ic_sysdev *icdev; + unsigned long icbase[2] = { IC0_PHYS_ADDR, IC1_PHYS_ADDR }; + int err, i; + + err = sysdev_class_register(&alchemy_ic_sysdev_class); + if (err) + return err; + + for (i = 0; i < 2; i++) { + icdev = kzalloc(sizeof(struct alchemy_ic_sysdev), GFP_KERNEL); + if (!icdev) + return -ENOMEM; + + icdev->base = ioremap(icbase[i], 0x1000); + + icdev->sysdev.id = i; + icdev->sysdev.cls = &alchemy_ic_sysdev_class; + err = sysdev_register(&icdev->sysdev); + if (err) { + kfree(icdev); + return err; + } + } + + return 0; +} +device_initcall(alchemy_ic_sysdev_init); diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 117f99f70649..f9e5622ebc95 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -19,39 +19,40 @@ #include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1100_mmc.h> - -#define PORT(_base, _irq) \ - { \ - .iobase = _base, \ - .membase = (void __iomem *)_base,\ - .mapbase = CPHYSADDR(_base), \ - .irq = _irq, \ - .regshift = 2, \ - .iotype = UPIO_AU, \ - .flags = UPF_SKIP_TEST \ +#include <asm/mach-au1x00/au1xxx_eth.h> + +#define PORT(_base, _irq) \ + { \ + .mapbase = _base, \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_AU, \ + .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ + UPF_FIXED_TYPE, \ + .type = PORT_16550A, \ } static struct plat_serial8250_port au1x00_uart_data[] = { #if defined(CONFIG_SERIAL_8250_AU1X00) #if defined(CONFIG_SOC_AU1000) - PORT(UART0_ADDR, AU1000_UART0_INT), - PORT(UART1_ADDR, AU1000_UART1_INT), - PORT(UART2_ADDR, AU1000_UART2_INT), - PORT(UART3_ADDR, AU1000_UART3_INT), + PORT(UART0_PHYS_ADDR, AU1000_UART0_INT), + PORT(UART1_PHYS_ADDR, AU1000_UART1_INT), + PORT(UART2_PHYS_ADDR, AU1000_UART2_INT), + PORT(UART3_PHYS_ADDR, AU1000_UART3_INT), #elif defined(CONFIG_SOC_AU1500) - PORT(UART0_ADDR, AU1500_UART0_INT), - PORT(UART3_ADDR, AU1500_UART3_INT), + PORT(UART0_PHYS_ADDR, AU1500_UART0_INT), + PORT(UART3_PHYS_ADDR, AU1500_UART3_INT), #elif defined(CONFIG_SOC_AU1100) - PORT(UART0_ADDR, AU1100_UART0_INT), - PORT(UART1_ADDR, AU1100_UART1_INT), - PORT(UART3_ADDR, AU1100_UART3_INT), + PORT(UART0_PHYS_ADDR, AU1100_UART0_INT), + PORT(UART1_PHYS_ADDR, AU1100_UART1_INT), + PORT(UART3_PHYS_ADDR, AU1100_UART3_INT), #elif defined(CONFIG_SOC_AU1550) - PORT(UART0_ADDR, AU1550_UART0_INT), - PORT(UART1_ADDR, AU1550_UART1_INT), - PORT(UART3_ADDR, AU1550_UART3_INT), + PORT(UART0_PHYS_ADDR, AU1550_UART0_INT), + PORT(UART1_PHYS_ADDR, AU1550_UART1_INT), + PORT(UART3_PHYS_ADDR, AU1550_UART3_INT), #elif defined(CONFIG_SOC_AU1200) - PORT(UART0_ADDR, AU1200_UART0_INT), - PORT(UART1_ADDR, AU1200_UART1_INT), + PORT(UART0_PHYS_ADDR, AU1200_UART0_INT), + PORT(UART1_PHYS_ADDR, AU1200_UART1_INT), #endif #endif /* CONFIG_SERIAL_8250_AU1X00 */ { }, @@ -73,8 +74,8 @@ static struct resource au1xxx_usb_ohci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AU1000_USB_HOST_INT, - .end = AU1000_USB_HOST_INT, + .start = FOR_PLATFORM_C_USB_HOST_INT, + .end = FOR_PLATFORM_C_USB_HOST_INT, .flags = IORESOURCE_IRQ, }, }; @@ -132,8 +133,8 @@ static struct resource au1xxx_usb_ehci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AU1000_USB_HOST_INT, - .end = AU1000_USB_HOST_INT, + .start = AU1200_USB_INT, + .end = AU1200_USB_INT, .flags = IORESOURCE_IRQ, }, }; @@ -308,11 +309,6 @@ static struct platform_device au1200_mmc1_device = { #endif /* #ifndef CONFIG_MIPS_DB1200 */ #endif /* #ifdef CONFIG_SOC_AU1200 */ -static struct platform_device au1x00_pcmcia_device = { - .name = "au1x00-pcmcia", - .id = 0, -}; - /* All Alchemy demoboards with I2C have this #define in their headers */ #ifdef SMBUS_PSC_BASE static struct resource pbdb_smbus_resources[] = { @@ -331,10 +327,92 @@ static struct platform_device pbdb_smbus_device = { }; #endif +/* Macro to help defining the Ethernet MAC resources */ +#define MAC_RES(_base, _enable, _irq) \ + { \ + .start = CPHYSADDR(_base), \ + .end = CPHYSADDR(_base + 0xffff), \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = CPHYSADDR(_enable), \ + .end = CPHYSADDR(_enable + 0x3), \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + } + +static struct resource au1xxx_eth0_resources[] = { +#if defined(CONFIG_SOC_AU1000) + MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT), +#elif defined(CONFIG_SOC_AU1100) + MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT), +#elif defined(CONFIG_SOC_AU1550) + MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT), +#elif defined(CONFIG_SOC_AU1500) + MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT), +#endif +}; + + +static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { + .phy1_search_mac0 = 1, +}; + +static struct platform_device au1xxx_eth0_device = { + .name = "au1000-eth", + .id = 0, + .num_resources = ARRAY_SIZE(au1xxx_eth0_resources), + .resource = au1xxx_eth0_resources, + .dev.platform_data = &au1xxx_eth0_platform_data, +}; + +#ifndef CONFIG_SOC_AU1100 +static struct resource au1xxx_eth1_resources[] = { +#if defined(CONFIG_SOC_AU1000) + MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT), +#elif defined(CONFIG_SOC_AU1550) + MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT), +#elif defined(CONFIG_SOC_AU1500) + MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT), +#endif +}; + +static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { + .phy1_search_mac0 = 1, +}; + +static struct platform_device au1xxx_eth1_device = { + .name = "au1000-eth", + .id = 1, + .num_resources = ARRAY_SIZE(au1xxx_eth1_resources), + .resource = au1xxx_eth1_resources, + .dev.platform_data = &au1xxx_eth1_platform_data, +}; +#endif + +void __init au1xxx_override_eth_cfg(unsigned int port, + struct au1000_eth_platform_data *eth_data) +{ + if (!eth_data || port > 1) + return; + + if (port == 0) + memcpy(&au1xxx_eth0_platform_data, eth_data, + sizeof(struct au1000_eth_platform_data)); +#ifndef CONFIG_SOC_AU1100 + else + memcpy(&au1xxx_eth1_platform_data, eth_data, + sizeof(struct au1000_eth_platform_data)); +#endif +} + static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xx0_uart_device, &au1xxx_usb_ohci_device, - &au1x00_pcmcia_device, #ifdef CONFIG_FB_AU1100 &au1100_lcd_device, #endif @@ -351,19 +429,27 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, #endif + &au1xxx_eth0_device, }; static int __init au1xxx_platform_init(void) { unsigned int uartclk = get_au1x00_uart_baud_base() * 16; - int i; + int err, i; /* Fill up uartclk. */ for (i = 0; au1x00_uart_data[i].flags; i++) au1x00_uart_data[i].uartclk = uartclk; - return platform_add_devices(au1xxx_platform_devices, - ARRAY_SIZE(au1xxx_platform_devices)); + err = platform_add_devices(au1xxx_platform_devices, + ARRAY_SIZE(au1xxx_platform_devices)); +#ifndef CONFIG_SOC_AU1100 + /* Register second MAC if enabled in pinfunc */ + if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) + platform_device_register(&au1xxx_eth1_device); +#endif + + return err; } arch_initcall(au1xxx_platform_init); diff --git a/arch/mips/alchemy/common/power.c b/arch/mips/alchemy/common/power.c index 6ab7b42aa1be..5ef06a164a82 100644 --- a/arch/mips/alchemy/common/power.c +++ b/arch/mips/alchemy/common/power.c @@ -36,9 +36,6 @@ #include <asm/uaccess.h> #include <asm/mach-au1x00/au1000.h> -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) -#include <asm/mach-au1x00/au1xxx_dbdma.h> -#endif #ifdef CONFIG_PM @@ -106,9 +103,6 @@ static void save_core_regs(void) sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */ #endif - /* Save interrupt controller state. */ - save_au1xxx_intctl(); - /* Clocks and PLLs. */ sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0); sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1); @@ -132,10 +126,6 @@ static void save_core_regs(void) sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3); sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3); sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3); - -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) - au1xxx_dbdma_suspend(); -#endif } static void restore_core_regs(void) @@ -199,19 +189,19 @@ static void restore_core_regs(void) au_writel(sleep_uart0_linectl, UART0_ADDR + UART_LCR); au_sync(); au_writel(sleep_uart0_clkdiv, UART0_ADDR + UART_CLK); au_sync(); } - - restore_au1xxx_intctl(); - -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) - au1xxx_dbdma_resume(); -#endif } void au_sleep(void) { - save_core_regs(); - au1xxx_save_and_sleep(); - restore_core_regs(); + int cpuid = alchemy_get_cputype(); + if (cpuid != ALCHEMY_CPU_UNKNOWN) { + save_core_regs(); + if (cpuid <= ALCHEMY_CPU_AU1500) + alchemy_sleep_au1000(); + else if (cpuid <= ALCHEMY_CPU_AU1200) + alchemy_sleep_au1550(); + restore_core_regs(); + } } #endif /* CONFIG_PM */ diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c index 18b310b475ca..c29511b11d44 100644 --- a/arch/mips/alchemy/common/prom.c +++ b/arch/mips/alchemy/common/prom.c @@ -43,29 +43,15 @@ int prom_argc; char **prom_argv; char **prom_envp; -char * __init_or_module prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - void prom_init_cmdline(void) { - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ + int i; - cp = &(arcs_cmdline[0]); - while (actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; + for (i = 1; i < prom_argc; i++) { + strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE); + if (i < (prom_argc - 1)) + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - if (prom_argc > 1) - *cp = '\0'; } char *prom_getenv(char *envname) @@ -121,14 +107,12 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str) int prom_get_ethernet_addr(char *ethernet_addr) { char *ethaddr_str; - char *argptr; /* Check the environment variables first */ ethaddr_str = prom_getenv("ethaddr"); if (!ethaddr_str) { /* Check command line */ - argptr = prom_getcmdline(); - ethaddr_str = strstr(argptr, "ethaddr="); + ethaddr_str = strstr(arcs_cmdline, "ethaddr="); if (!ethaddr_str) return -1; diff --git a/arch/mips/alchemy/common/puts.c b/arch/mips/alchemy/common/puts.c deleted file mode 100644 index 55bbe24d45b6..000000000000 --- a/arch/mips/alchemy/common/puts.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Low level UART routines to directly access Alchemy UART. - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <asm/mach-au1x00/au1000.h> - -#define SERIAL_BASE UART_BASE -#define SER_CMD 0x7 -#define SER_DATA 0x1 -#define TX_BUSY 0x20 - -#define TIMEOUT 0xffffff -#define SLOW_DOWN - -static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE; - -#ifdef SLOW_DOWN -static inline void slow_down(void) -{ - int k; - - for (k = 0; k < 10000; k++); -} -#else -#define slow_down() -#endif - -void -prom_putchar(const unsigned char c) -{ - unsigned char ch; - int i = 0; - - do { - ch = com1[SER_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) - break; - } while (0 == (ch & TX_BUSY)); - - com1[SER_DATA] = c; -} diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c deleted file mode 100644 index 4791011e8f92..000000000000 --- a/arch/mips/alchemy/common/reset.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Au1xx0 reset routines. - * - * Copyright 2001, 2006, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/gpio.h> - -#include <asm/cacheflush.h> -#include <asm/mach-au1x00/au1000.h> - -void au1000_restart(char *command) -{ - /* Set all integrated peripherals to disabled states */ - extern void board_reset(void); - u32 prid = read_c0_prid(); - - printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n"); - - switch (prid & 0xFF000000) { - case 0x00000000: /* Au1000 */ - au_writel(0x02, 0xb0000010); /* ac97_enable */ - au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ - asm("sync"); - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb0300040); /* ir_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb0520000); /* macen0 */ - au_writel(0x00, 0xb0520004); /* macen1 */ - au_writel(0x00, 0xb1000008); /* i2s_enable */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1200100); /* uart1_enable */ - au_writel(0x00, 0xb1300100); /* uart2_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x02, 0xb1600100); /* ssi0_enable */ - au_writel(0x02, 0xb1680100); /* ssi1_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - case 0x01000000: /* Au1500 */ - au_writel(0x02, 0xb0000010); /* ac97_enable */ - au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ - asm("sync"); - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb1520000); /* macen0 */ - au_writel(0x00, 0xb1520004); /* macen1 */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - case 0x02000000: /* Au1100 */ - au_writel(0x02, 0xb0000010); /* ac97_enable */ - au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ - asm("sync"); - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb0300040); /* ir_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb0520000); /* macen0 */ - au_writel(0x00, 0xb1000008); /* i2s_enable */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1200100); /* uart1_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x02, 0xb1600100); /* ssi0_enable */ - au_writel(0x02, 0xb1680100); /* ssi1_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - case 0x03000000: /* Au1550 */ - au_writel(0x00, 0xb1a00004); /* psc 0 */ - au_writel(0x00, 0xb1b00004); /* psc 1 */ - au_writel(0x00, 0xb0a00004); /* psc 2 */ - au_writel(0x00, 0xb0b00004); /* psc 3 */ - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb1520000); /* macen0 */ - au_writel(0x00, 0xb1520004); /* macen1 */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1200100); /* uart1_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - } - - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - - /* Give board a chance to do a hardware reset */ - board_reset(); - - /* Jump to the beggining in case board_reset() is empty */ - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -void au1000_halt(void) -{ -#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) - /* Power off system */ - printk(KERN_NOTICE "\n** Powering off...\n"); - au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C); - au_sync(); - while (1); /* should not get here */ -#else - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); -#ifdef CONFIG_MIPS_MIRAGE - gpio_direction_output(210, 1); -#endif -#ifdef CONFIG_MIPS_DB1200 - au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C); -#endif -#ifdef CONFIG_PM - au_sleep(); - - /* Should not get here */ - printk(KERN_ERR "Unable to put CPU in sleep mode\n"); - while (1); -#else - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -#endif -#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */ -} - -void au1000_power_off(void) -{ - au1000_halt(); -} diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 6184baa56786..561e5da2658b 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -29,18 +29,13 @@ #include <linux/ioport.h> #include <linux/jiffies.h> #include <linux/module.h> -#include <linux/pm.h> #include <asm/mipsregs.h> -#include <asm/reboot.h> #include <asm/time.h> #include <au1000.h> extern void __init board_setup(void); -extern void au1000_restart(char *); -extern void au1000_halt(void); -extern void au1000_power_off(void); extern void set_cpuspec(void); void __init plat_mem_setup(void) @@ -57,10 +52,6 @@ void __init plat_mem_setup(void) /* this is faster than wasting cycles trying to approximate it */ preset_lpj = (est_freq >> 1) / HZ; - _machine_restart = au1000_restart; - _machine_halt = au1000_halt; - pm_power_off = au1000_power_off; - board_setup(); /* board specific setup */ if (au1xxx_cpu_needs_config_od()) @@ -78,37 +69,20 @@ void __init plat_mem_setup(void) iomem_resource.end = IOMEM_RESOURCE_END; } -#if defined(CONFIG_64BIT_PHYS_ADDR) +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI) /* This routine should be valid for all Au1x based boards */ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) { + u32 start = (u32)Au1500_PCI_MEM_START; + u32 end = (u32)Au1500_PCI_MEM_END; + /* Don't fixup 36-bit addresses */ if ((phys_addr >> 32) != 0) return phys_addr; -#ifdef CONFIG_PCI - { - u32 start = (u32)Au1500_PCI_MEM_START; - u32 end = (u32)Au1500_PCI_MEM_END; - - /* Check for PCI memory window */ - if (phys_addr >= start && (phys_addr + size - 1) <= end) - return (phys_t) - ((phys_addr - start) + Au1500_PCI_MEM_START); - } -#endif - - /* - * All Au1xx0 SOCs have a PCMCIA controller. - * We setup our 32-bit pseudo addresses to be equal to the - * 36-bit addr >> 4, to make it easier to check the address - * and fix it. - * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000. - * The pseudo address we use is 0xF400 0000. Any address over - * 0xF400 0000 is a PCMCIA pseudo address. - */ - if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) - return (phys_t)(phys_addr << 4); + /* Check for PCI memory window */ + if (phys_addr >= start && (phys_addr + size - 1) <= end) + return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START); /* default nop */ return phys_addr; diff --git a/arch/mips/alchemy/common/sleeper.S b/arch/mips/alchemy/common/sleeper.S index 4f4b16741d12..77f3c743b716 100644 --- a/arch/mips/alchemy/common/sleeper.S +++ b/arch/mips/alchemy/common/sleeper.S @@ -22,10 +22,9 @@ .set noat .align 5 -/* Save all of the processor general registers and go to sleep. - * A wakeup condition will get us back here to restore the registers. - */ -LEAF(au1xxx_save_and_sleep) + +/* preparatory stuff */ +.macro SETUP_SLEEP subu sp, PT_SIZE sw $1, PT_R1(sp) sw $2, PT_R2(sp) @@ -69,12 +68,32 @@ LEAF(au1xxx_save_and_sleep) */ lui t3, 0xb190 /* sys_xxx */ sw sp, 0x0018(t3) - la k0, 3f /* resume path */ + la k0, alchemy_sleep_wakeup /* resume path */ sw k0, 0x001c(t3) +.endm - /* Put SDRAM into self refresh: Preload instructions into cache, - * issue a precharge, auto/self refresh, then sleep commands to it. - */ +.macro DO_SLEEP + /* put power supply and processor to sleep */ + sw zero, 0x0078(t3) /* sys_slppwr */ + sync + sw zero, 0x007c(t3) /* sys_sleep */ + sync + nop + nop + nop + nop + nop + nop + nop + nop +.endm + +/* sleep code for Au1000/Au1100/Au1500 memory controller type */ +LEAF(alchemy_sleep_au1000) + + SETUP_SLEEP + + /* cache following instructions, as memory gets put to sleep */ la t0, 1f .set mips3 cache 0x14, 0(t0) @@ -84,17 +103,32 @@ LEAF(au1xxx_save_and_sleep) .set mips0 1: lui a0, 0xb400 /* mem_xxx */ -#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || \ - defined(CONFIG_SOC_AU1500) sw zero, 0x001c(a0) /* Precharge */ sync sw zero, 0x0020(a0) /* Auto Refresh */ sync sw zero, 0x0030(a0) /* Sleep */ sync -#endif -#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) + DO_SLEEP + +END(alchemy_sleep_au1000) + +/* sleep code for Au1550/Au1200 memory controller type */ +LEAF(alchemy_sleep_au1550) + + SETUP_SLEEP + + /* cache following instructions, as memory gets put to sleep */ + la t0, 1f + .set mips3 + cache 0x14, 0(t0) + cache 0x14, 32(t0) + cache 0x14, 64(t0) + cache 0x14, 96(t0) + .set mips0 + +1: lui a0, 0xb400 /* mem_xxx */ sw zero, 0x08c0(a0) /* Precharge */ sync sw zero, 0x08d0(a0) /* Self Refresh */ @@ -114,26 +148,17 @@ LEAF(au1xxx_save_and_sleep) and t1, t0, t1 /* clear CE[1:0] */ sw t1, 0x0840(a0) /* mem_sdconfiga */ sync -#endif - /* put power supply and processor to sleep */ - sw zero, 0x0078(t3) /* sys_slppwr */ - sync - sw zero, 0x007c(t3) /* sys_sleep */ - sync - nop - nop - nop - nop - nop - nop - nop - nop + DO_SLEEP + +END(alchemy_sleep_au1550) + /* This is where we return upon wakeup. * Reload all of the registers and return. */ -3: lw k0, 0x20(sp) +LEAF(alchemy_sleep_wakeup) + lw k0, 0x20(sp) mtc0 k0, CP0_STATUS lw k0, 0x1c(sp) mtc0 k0, CP0_CONTEXT @@ -169,4 +194,4 @@ LEAF(au1xxx_save_and_sleep) lw $31, PT_R31(sp) jr ra addiu sp, PT_SIZE -END(au1xxx_save_and_sleep) +END(alchemy_sleep_wakeup) diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 379a664809b0..2aecb2fdf982 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net> + * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com> * * Previous incarnations were: * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com> @@ -85,7 +85,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = { .name = "rtcmatch2", .features = CLOCK_EVT_FEAT_ONESHOT, .rating = 100, - .irq = AU1000_RTC_MATCH2_INT, .set_next_event = au1x_rtcmatch2_set_next_event, .set_mode = au1x_rtcmatch2_set_mode, .cpumask = cpu_all_mask, @@ -98,11 +97,13 @@ static struct irqaction au1x_rtcmatch2_irqaction = { .dev_id = &au1x_rtcmatch2_clockdev, }; -void __init plat_time_init(void) +static int __init alchemy_time_init(unsigned int m2int) { struct clock_event_device *cd = &au1x_rtcmatch2_clockdev; unsigned long t; + au1x_rtcmatch2_clockdev.irq = m2int; + /* Check if firmware (YAMON, ...) has enabled 32kHz and clock * has been detected. If so install the rtcmatch2 clocksource, * otherwise don't bother. Note that both bits being set is by @@ -148,13 +149,18 @@ void __init plat_time_init(void) cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd); cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */ clockevents_register_device(cd); - setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction); + setup_irq(m2int, &au1x_rtcmatch2_irqaction); printk(KERN_INFO "Alchemy clocksource installed\n"); - return; + return 0; cntr_err: + return -1; +} + +static void __init alchemy_setup_c0timer(void) +{ /* * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this * function is called. Because the Alchemy counters are unusable @@ -166,3 +172,22 @@ cntr_err: r4k_clockevent_init(); init_r4k_clocksource(); } + +static int alchemy_m2inttab[] __initdata = { + AU1000_RTC_MATCH2_INT, + AU1500_RTC_MATCH2_INT, + AU1100_RTC_MATCH2_INT, + AU1550_RTC_MATCH2_INT, + AU1200_RTC_MATCH2_INT, +}; + +void __init plat_time_init(void) +{ + int t; + + t = alchemy_get_cputype(); + if (t == ALCHEMY_CPU_UNKNOWN) + alchemy_setup_c0timer(); + else if (alchemy_time_init(alchemy_m2inttab[t])) + alchemy_setup_c0timer(); +} diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index 730f9f2b30e8..ecbd37f9ee87 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -2,7 +2,7 @@ # Alchemy Develboards # -obj-y += prom.o +obj-y += prom.o bcsr.o platform.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MIPS_PB1000) += pb1000/ obj-$(CONFIG_MIPS_PB1100) += pb1100/ @@ -11,8 +11,10 @@ obj-$(CONFIG_MIPS_PB1500) += pb1500/ obj-$(CONFIG_MIPS_PB1550) += pb1550/ obj-$(CONFIG_MIPS_DB1000) += db1x00/ obj-$(CONFIG_MIPS_DB1100) += db1x00/ -obj-$(CONFIG_MIPS_DB1200) += pb1200/ +obj-$(CONFIG_MIPS_DB1200) += db1200/ obj-$(CONFIG_MIPS_DB1500) += db1x00/ obj-$(CONFIG_MIPS_DB1550) += db1x00/ obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/ obj-$(CONFIG_MIPS_MIRAGE) += db1x00/ + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c new file mode 100644 index 000000000000..3bc4fd2155d7 --- /dev/null +++ b/arch/mips/alchemy/devboards/bcsr.c @@ -0,0 +1,148 @@ +/* + * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction. + * + * All Alchemy development boards (except, of course, the weird PB1000) + * have a few registers in a CPLD with standardised layout; they mostly + * only differ in base address. + * All registers are 16bits wide with 32bit spacing. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/mach-db1x00/bcsr.h> + +static struct bcsr_reg { + void __iomem *raddr; + spinlock_t lock; +} bcsr_regs[BCSR_CNT]; + +static void __iomem *bcsr_virt; /* KSEG1 addr of BCSR base */ +static int bcsr_csc_base; /* linux-irq of first cascaded irq */ + +void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys) +{ + int i; + + bcsr1_phys = KSEG1ADDR(CPHYSADDR(bcsr1_phys)); + bcsr2_phys = KSEG1ADDR(CPHYSADDR(bcsr2_phys)); + + bcsr_virt = (void __iomem *)bcsr1_phys; + + for (i = 0; i < BCSR_CNT; i++) { + if (i >= BCSR_HEXLEDS) + bcsr_regs[i].raddr = (void __iomem *)bcsr2_phys + + (0x04 * (i - BCSR_HEXLEDS)); + else + bcsr_regs[i].raddr = (void __iomem *)bcsr1_phys + + (0x04 * i); + + spin_lock_init(&bcsr_regs[i].lock); + } +} + +unsigned short bcsr_read(enum bcsr_id reg) +{ + unsigned short r; + unsigned long flags; + + spin_lock_irqsave(&bcsr_regs[reg].lock, flags); + r = __raw_readw(bcsr_regs[reg].raddr); + spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags); + return r; +} +EXPORT_SYMBOL_GPL(bcsr_read); + +void bcsr_write(enum bcsr_id reg, unsigned short val) +{ + unsigned long flags; + + spin_lock_irqsave(&bcsr_regs[reg].lock, flags); + __raw_writew(val, bcsr_regs[reg].raddr); + wmb(); + spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags); +} +EXPORT_SYMBOL_GPL(bcsr_write); + +void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set) +{ + unsigned short r; + unsigned long flags; + + spin_lock_irqsave(&bcsr_regs[reg].lock, flags); + r = __raw_readw(bcsr_regs[reg].raddr); + r &= ~clr; + r |= set; + __raw_writew(r, bcsr_regs[reg].raddr); + wmb(); + spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags); +} +EXPORT_SYMBOL_GPL(bcsr_mod); + +/* + * DB1200/PB1200 CPLD IRQ muxer + */ +static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d) +{ + unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT); + + for ( ; bisr; bisr &= bisr - 1) + generic_handle_irq(bcsr_csc_base + __ffs(bisr)); +} + +/* NOTE: both the enable and mask bits must be cleared, otherwise the + * CPLD generates tons of spurious interrupts (at least on my DB1200). + * -- mlau + */ +static void bcsr_irq_mask(unsigned int irq_nr) +{ + unsigned short v = 1 << (irq_nr - bcsr_csc_base); + __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR); + __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR); + wmb(); +} + +static void bcsr_irq_maskack(unsigned int irq_nr) +{ + unsigned short v = 1 << (irq_nr - bcsr_csc_base); + __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR); + __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR); + __raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT); /* ack */ + wmb(); +} + +static void bcsr_irq_unmask(unsigned int irq_nr) +{ + unsigned short v = 1 << (irq_nr - bcsr_csc_base); + __raw_writew(v, bcsr_virt + BCSR_REG_INTSET); + __raw_writew(v, bcsr_virt + BCSR_REG_MASKSET); + wmb(); +} + +static struct irq_chip bcsr_irq_type = { + .name = "CPLD", + .mask = bcsr_irq_mask, + .mask_ack = bcsr_irq_maskack, + .unmask = bcsr_irq_unmask, +}; + +void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq) +{ + unsigned int irq; + + /* mask & disable & ack all */ + __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR); + __raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR); + __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT); + wmb(); + + bcsr_csc_base = csc_start; + + for (irq = csc_start; irq <= csc_end; irq++) + set_irq_chip_and_handler_name(irq, &bcsr_irq_type, + handle_level_irq, "level"); + + set_irq_chained_handler(hook_irq, bcsr_csc_handler); +} diff --git a/arch/mips/alchemy/devboards/db1200/Makefile b/arch/mips/alchemy/devboards/db1200/Makefile new file mode 100644 index 000000000000..17840a5e2738 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200/Makefile @@ -0,0 +1 @@ +obj-y += setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c new file mode 100644 index 000000000000..3cb95a98ab31 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200/platform.c @@ -0,0 +1,561 @@ +/* + * DBAu1200 board platform device registration + * + * Copyright (C) 2008-2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/mmc/host.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/smc91x.h> + +#include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1550_spi.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-db1x00/db1200.h> + +#include "../platform.h" + +static struct mtd_partition db1200_spiflash_parts[] = { + { + .name = "DB1200 SPI flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data db1200_spiflash_data = { + .name = "s25fl001", + .parts = db1200_spiflash_parts, + .nr_parts = ARRAY_SIZE(db1200_spiflash_parts), + .type = "m25p10", +}; + +static struct spi_board_info db1200_spi_devs[] __initdata = { + { + /* TI TMP121AIDBVR temp sensor */ + .modalias = "tmp121", + .max_speed_hz = 2000000, + .bus_num = 0, + .chip_select = 0, + .mode = 0, + }, + { + /* Spansion S25FL001D0FMA SPI flash */ + .modalias = "m25p80", + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 1, + .mode = 0, + .platform_data = &db1200_spiflash_data, + }, +}; + +static struct i2c_board_info db1200_i2c_devs[] __initdata = { + { + /* AT24C04-10 I2C eeprom */ + I2C_BOARD_INFO("24c04", 0x52), + }, + { + /* Philips NE1619 temp/voltage sensor (adm1025 drv) */ + I2C_BOARD_INFO("ne1619", 0x2d), + }, + { + /* I2S audio codec WM8731 */ + I2C_BOARD_INFO("wm8731", 0x1b), + }, +}; + +/**********************************************************************/ + +static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1200_nand_device_ready(struct mtd_info *mtd) +{ + return __raw_readl((void __iomem *)MEM_STSTAT) & 1; +} + +static const char *db1200_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition db1200_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1200_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1200_nand_parts), + .partitions = db1200_nand_parts, + .chip_delay = 20, + .part_probe_types = db1200_part_probes, + }, + .ctrl = { + .dev_ready = au1200_nand_device_ready, + .cmd_ctrl = au1200_nand_cmd_ctrl, + }, +}; + +static struct resource db1200_nand_res[] = { + [0] = { + .start = DB1200_NAND_PHYS_ADDR, + .end = DB1200_NAND_PHYS_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1200_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1200_nand_res), + .resource = db1200_nand_res, + .id = -1, + .dev = { + .platform_data = &db1200_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct smc91x_platdata db1200_eth_data = { + .flags = SMC91X_NOWAIT | SMC91X_USE_16BIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + +static struct resource db1200_eth_res[] = { + [0] = { + .start = DB1200_ETH_PHYS_ADDR, + .end = DB1200_ETH_PHYS_ADDR + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1200_ETH_INT, + .end = DB1200_ETH_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1200_eth_dev = { + .dev = { + .platform_data = &db1200_eth_data, + }, + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(db1200_eth_res), + .resource = db1200_eth_res, +}; + +/**********************************************************************/ + +static struct resource db1200_ide_res[] = { + [0] = { + .start = DB1200_IDE_PHYS_ADDR, + .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1200_IDE_INT, + .end = DB1200_IDE_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 ide_dmamask = DMA_32BIT_MASK; + +static struct platform_device db1200_ide_dev = { + .name = "au1200-ide", + .id = 0, + .dev = { + .dma_mask = &ide_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(db1200_ide_res), + .resource = db1200_ide_res, +}; + +/**********************************************************************/ + +static struct platform_device db1200_rtc_dev = { + .name = "rtc-au1xxx", + .id = -1, +}; + +/**********************************************************************/ + +/* SD carddetects: they're supposed to be edge-triggered, but ack + * doesn't seem to work (CPLD Rev 2). Instead, the screaming one + * is disabled and its counterpart enabled. The 500ms timeout is + * because the carddetect isn't debounced in hardware. + */ +static irqreturn_t db1200_mmc_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + if (irq == DB1200_SD0_INSERT_INT) { + disable_irq_nosync(DB1200_SD0_INSERT_INT); + enable_irq(DB1200_SD0_EJECT_INT); + } else { + disable_irq_nosync(DB1200_SD0_EJECT_INT); + enable_irq(DB1200_SD0_INSERT_INT); + } + + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + if (mmc_cd) { + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + } + + return IRQ_HANDLED; +} + +static int db1200_mmc_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd, + IRQF_DISABLED, "sd_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd, + IRQF_DISABLED, "sd_eject", mmc_host); + if (ret) { + free_irq(DB1200_SD0_INSERT_INT, mmc_host); + goto out; + } + + if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) + enable_irq(DB1200_SD0_EJECT_INT); + else + enable_irq(DB1200_SD0_INSERT_INT); + + } else { + free_irq(DB1200_SD0_INSERT_INT, mmc_host); + free_irq(DB1200_SD0_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void db1200_mmc_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); +} + +static int db1200_mmc_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; +} + +static int db1200_mmc_card_inserted(void *mmc_host) +{ + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; +} + +static void db1200_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1200_mmc_led = { + .brightness_set = db1200_mmcled_set, +}; + +/* needed by arch/mips/alchemy/common/platform.c */ +struct au1xmmc_platform_data au1xmmc_platdata[] = { + [0] = { + .cd_setup = db1200_mmc_cd_setup, + .set_power = db1200_mmc_set_power, + .card_inserted = db1200_mmc_card_inserted, + .card_readonly = db1200_mmc_card_readonly, + .led = &db1200_mmc_led, + }, +}; + +/**********************************************************************/ + +static struct resource au1200_psc0_res[] = { + [0] = { + .start = PSC0_PHYS_ADDR, + .end = PSC0_PHYS_ADDR + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_PSC0_INT, + .end = AU1200_PSC0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_PSC0_TX, + .end = DSCR_CMD0_PSC0_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_PSC0_RX, + .end = DSCR_CMD0_PSC0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1200_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1200_psc0_res), + .resource = au1200_psc0_res, +}; + +static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol) +{ + if (cs) + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL); + else + bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0); +} + +static struct au1550_spi_info db1200_spi_platdata = { + .mainclk_hz = 50000000, /* PSC0 clock */ + .num_chipselect = 2, + .activate_cs = db1200_spi_cs_en, +}; + +static u64 spi_dmamask = DMA_32BIT_MASK; + +static struct platform_device db1200_spi_dev = { + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &db1200_spi_platdata, + }, + .name = "au1550-spi", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1200_psc0_res), + .resource = au1200_psc0_res, +}; + +static struct resource au1200_psc1_res[] = { + [0] = { + .start = PSC1_PHYS_ADDR, + .end = PSC1_PHYS_ADDR + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_PSC1_INT, + .end = AU1200_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_PSC1_TX, + .end = DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_PSC1_RX, + .end = DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1200_audio_dev = { + /* name assigned later based on switch setting */ + .id = 1, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1200_psc1_res), + .resource = au1200_psc1_res, +}; + +static struct platform_device *db1200_devs[] __initdata = { + NULL, /* PSC0, selected by S6.8 */ + &db1200_ide_dev, + &db1200_eth_dev, + &db1200_rtc_dev, + &db1200_nand_dev, + &db1200_audio_dev, +}; + +static int __init db1200_dev_init(void) +{ + unsigned long pfc; + unsigned short sw; + int swapped; + + i2c_register_board_info(0, db1200_i2c_devs, + ARRAY_SIZE(db1200_i2c_devs)); + spi_register_board_info(db1200_spi_devs, + ARRAY_SIZE(db1200_i2c_devs)); + + /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) + * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) + */ + + /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however + * this pin is claimed by PSC0 (unused though, but pinmux doesn't + * allow to free it without crippling the SPI interface). + * As a result, in SPI mode, OTG simply won't work (PSC0 uses + * it as an input pin which is pulled high on the boards). + */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A; + + /* switch off OTG VBUS supply */ + gpio_request(215, "otg-vbus"); + gpio_direction_output(215, 1); + + printk(KERN_INFO "DB1200 device configuration:\n"); + + sw = bcsr_read(BCSR_SWITCHES); + if (sw & BCSR_SWITCHES_DIP_8) { + db1200_devs[0] = &db1200_i2c_dev; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); + + pfc |= (2 << 17); /* GPIO2 block owns GPIO215 */ + + printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n"); + printk(KERN_INFO " OTG port VBUS supply available!\n"); + } else { + db1200_devs[0] = &db1200_spi_dev; + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX); + + pfc |= (1 << 17); /* PSC0 owns GPIO215 */ + + printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n"); + printk(KERN_INFO " OTG port VBUS supply disabled\n"); + } + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S! + * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S + */ + sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7; + if (sw == BCSR_SWITCHES_DIP_8) { + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX); + db1200_audio_dev.name = "au1xpsc_i2s"; + printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n"); + } else { + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0); + db1200_audio_dev.name = "au1xpsc_ac97"; + printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n"); + } + + /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + DB1200_PC0_INT, + DB1200_PC0_INSERT_INT, + /*DB1200_PC0_STSCHG_INT*/0, + DB1200_PC0_EJECT_INT, + 0); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + PCMCIA_MEM_PHYS_ADDR + 0x004000000, + PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + PCMCIA_IO_PHYS_ADDR + 0x004000000, + PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + DB1200_PC1_INT, + DB1200_PC1_INSERT_INT, + /*DB1200_PC1_STSCHG_INT*/0, + DB1200_PC1_EJECT_INT, + 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(64 << 20, 2, swapped); + + return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); +} +device_initcall(db1200_dev_init); + +/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */ +int board_au1200fb_panel(void) +{ + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; +} + +int board_au1200fb_panel_init(void) +{ + /* Apply power */ + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + return 0; +} + +int board_au1200fb_panel_shutdown(void) +{ + /* Remove power */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); + return 0; +} diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c new file mode 100644 index 000000000000..887619547553 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -0,0 +1,82 @@ +/* + * Alchemy/AMD/RMI DB1200 board setup. + * + * Licensed under the terms outlined in the file COPYING in the root of + * this source archive. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-db1x00/db1200.h> + +const char *get_system_type(void) +{ + return "Alchemy Db1200"; +} + +void __init board_setup(void) +{ + unsigned long freq0, clksrc, div, pfc; + unsigned short whoami; + + bcsr_init(DB1200_BCSR_PHYS_ADDR, + DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", + (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); + + /* SMBus/SPI on PSC0, Audio on PSC1 */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); + pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from + * CPU clock; all other clock generators off/unused. + */ + div = (get_au1x00_speed() + 25000000) / 50000000; + if (div & 1) + div++; + div = ((div >> 1) - 1) & 0xff; + + freq0 = div << SYS_FC_FRDIV0_BIT; + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + freq0 |= SYS_FC_FE0; /* enable F0 */ + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + + /* psc0_intclk comes 1:1 from F0 */ + clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; + __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); + wmb(); +} + +static int __init db1200_arch_init(void) +{ + /* GPIO7 is low-level triggered CPLD cascade */ + set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); + bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); + + /* insert/eject pairs: one of both is always screaming. To avoid + * issues they must not be automatically enabled when initially + * requested. + */ + irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN; + + return 0; +} +arch_initcall(db1200_arch_init); diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile index 432241ab8677..613c0c0c8be9 100644 --- a/arch/mips/alchemy/devboards/db1x00/Makefile +++ b/arch/mips/alchemy/devboards/db1x00/Makefile @@ -5,4 +5,4 @@ # Makefile for the Alchemy Semiconductor DBAu1xx0 boards. # -obj-y := board_setup.o irqmap.o +obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index de30d8ea7176..50c9bef99daa 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -29,59 +29,139 @@ #include <linux/gpio.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pm.h> #include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1xxx_eth.h> #include <asm/mach-db1x00/db1x00.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/reboot.h> #include <prom.h> +#ifdef CONFIG_MIPS_DB1500 +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */ + [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ +}; + +#endif -static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +#ifdef CONFIG_MIPS_DB1550 +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */ + [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ +}; +#endif + + +#ifdef CONFIG_MIPS_BOSPORUS +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ + [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */ + [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ +}; + +/* + * Micrel/Kendin 5 port switch attached to MAC0, + * MAC0 is associated with PHY address 5 (== WAN port) + * MAC1 is not associated with any PHY, since it's connected directly + * to the switch. + * no interrupts are used + */ +static struct au1000_eth_platform_data eth0_pdata = { + .phy_static_config = 1, + .phy_addr = 5, +}; + +static void bosporus_power_off(void) +{ + printk(KERN_INFO "It's now safe to turn off power\n"); + while (1) + asm volatile (".set mips3 ; wait ; .set mips0"); +} const char *get_system_type(void) { -#ifdef CONFIG_MIPS_BOSPORUS return "Alchemy Bosporus Gateway Reference"; -#else - return "Alchemy Db1x00"; +} #endif + + +#ifdef CONFIG_MIPS_MIRAGE +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */ + [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */ + [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */ +}; + +static void mirage_power_off(void) +{ + alchemy_gpio_direction_output(210, 1); +} + +const char *get_system_type(void) +{ + return "Alchemy Mirage"; +} +#endif + + +#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE) +static void mips_softreset(void) +{ + asm volatile ("jr\t%0" : : "r"(0xbfc00000)); } -void board_reset(void) +#else + +const char *get_system_type(void) { - /* Hit BCSR.SW_RESET[RESET] */ - bcsr->swreset = 0x0000; + return "Alchemy Db1x00"; } +#endif + void __init board_setup(void) { - u32 pin_func = 0; - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } + unsigned long bcsr1, bcsr2; + u32 pin_func; + + bcsr1 = DB1000_BCSR_PHYS_ADDR; + bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS; + + pin_func = 0; + +#ifdef CONFIG_MIPS_DB1000 + printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1500 + printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); #endif +#ifdef CONFIG_MIPS_DB1100 + printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); +#endif +#ifdef CONFIG_MIPS_BOSPORUS + au1xxx_override_eth_cfg(0, ð0_pdata); -#ifdef CONFIG_FB_AU1100 - argptr = strstr(argptr, "video="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } + printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); #endif +#ifdef CONFIG_MIPS_MIRAGE + printk(KERN_INFO "AMD Alchemy Mirage Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1550 + printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); + bcsr1 = DB1550_BCSR_PHYS_ADDR; + bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS; #endif + /* initialize board register space */ + bcsr_init(bcsr1, bcsr2); + /* Not valid for Au1550 */ #if defined(CONFIG_IRDA) && \ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) @@ -89,11 +169,10 @@ void __init board_setup(void) pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; au_writel(pin_func, SYS_PINFUNC); /* Power off until the driver is in use */ - bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; - bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; - au_sync(); + bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, + BCSR_RESETS_IRDA_MODE_OFF); #endif - bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */ + bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ /* Enable GPIO[31:0] inputs */ alchemy_gpio1_input_enable(); @@ -120,26 +199,53 @@ void __init board_setup(void) * be part of the audio driver. */ alchemy_gpio_direction_output(209, 1); -#endif - - au_sync(); -#ifdef CONFIG_MIPS_DB1000 - printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1500 - printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1100 - printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); + pm_power_off = mirage_power_off; + _machine_halt = mirage_power_off; + _machine_restart = (void(*)(char *))mips_softreset; #endif + #ifdef CONFIG_MIPS_BOSPORUS - printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); + pm_power_off = bosporus_power_off; + _machine_halt = bosporus_power_off; + _machine_restart = (void(*)(char *))mips_softreset; #endif -#ifdef CONFIG_MIPS_MIRAGE - printk(KERN_INFO "AMD Alchemy Mirage Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1550 - printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); + au_sync(); +} + +static int __init db1x00_init_irq(void) +{ +#if defined(CONFIG_MIPS_MIRAGE) + set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */ +#elif defined(CONFIG_MIPS_DB1550) + set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */ + set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */ + set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ + set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ +#elif defined(CONFIG_MIPS_DB1500) + set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ + set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ + set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ + set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ +#elif defined(CONFIG_MIPS_DB1100) + set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ + set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ + set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ + set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ +#elif defined(CONFIG_MIPS_DB1000) + set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ + set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ + set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ + set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ #endif + return 0; } +arch_initcall(db1x00_init_irq); diff --git a/arch/mips/alchemy/devboards/db1x00/irqmap.c b/arch/mips/alchemy/devboards/db1x00/irqmap.c deleted file mode 100644 index 0b09025087c6..000000000000 --- a/arch/mips/alchemy/devboards/db1x00/irqmap.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/mach-au1x00/au1000.h> - -#ifdef CONFIG_MIPS_DB1500 -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_BOSPORUS -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */ - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_MIRAGE -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */ - [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */ - [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */ -}; -#endif - -#ifdef CONFIG_MIPS_DB1550 -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */ - [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - -#ifndef CONFIG_MIPS_MIRAGE -#ifdef CONFIG_MIPS_DB1550 - { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */ - { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */ -#else - { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */ - { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */ - { AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */ - - { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */ - { AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */ - { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */ -#endif -#else - { AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */ -#endif - -}; - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c new file mode 100644 index 000000000000..978d5ab3d678 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1x00/platform.c @@ -0,0 +1,118 @@ +/* + * DBAu1xxx board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-db1x00/bcsr.h> +#include "../platform.h" + +/* DB1xxx PCMCIA interrupt sources: + * CD0/1 GPIO0/3 + * STSCHG0/1 GPIO1/4 + * CARD0/1 GPIO2/5 + * Db1550: 0/1, 21/22, 3/5 + */ + +#define DB1XXX_HAS_PCMCIA +#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) + +#if defined(CONFIG_MIPS_DB1000) +#define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT +#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO1_INT +#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO2_INT +#define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT +#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT +#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#elif defined(CONFIG_MIPS_DB1100) +#define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT +#define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT +#define DB1XXX_PCMCIA_CARD0 AU1100_GPIO2_INT +#define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT +#define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT +#define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#elif defined(CONFIG_MIPS_DB1500) +#define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT +#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT +#define DB1XXX_PCMCIA_CARD0 AU1500_GPIO2_INT +#define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT +#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT +#define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#elif defined(CONFIG_MIPS_DB1550) +#define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT +#define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT +#define DB1XXX_PCMCIA_CARD0 AU1550_GPIO3_INT +#define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT +#define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT +#define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT +#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#else +/* other board: no PCMCIA */ +#undef DB1XXX_HAS_PCMCIA +#undef F_SWAPPED +#define F_SWAPPED 0 +#if defined(CONFIG_MIPS_BOSPORUS) +#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */ +#define BOARD_FLASH_WIDTH 2 /* 16-bits */ +#elif defined(CONFIG_MIPS_MIRAGE) +#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif +#endif + +static int __init db1xxx_dev_init(void) +{ +#ifdef DB1XXX_HAS_PCMCIA + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + DB1XXX_PCMCIA_CARD0, + DB1XXX_PCMCIA_CD0, + /*DB1XXX_PCMCIA_STSCHG0*/0, + 0, + 0); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + PCMCIA_MEM_PHYS_ADDR + 0x004000000, + PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + PCMCIA_IO_PHYS_ADDR + 0x004000000, + PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + DB1XXX_PCMCIA_CARD1, + DB1XXX_PCMCIA_CD1, + /*DB1XXX_PCMCIA_STSCHG1*/0, + 0, + 1); +#endif + db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED); + return 0; +} +device_initcall(db1xxx_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c index cd273545e810..4ef50d86b181 100644 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c @@ -27,28 +27,29 @@ #include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/pm.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-pb1x00/pb1000.h> +#include <asm/reboot.h> #include <prom.h> - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 }, -}; - +#include "../platform.h" const char *get_system_type(void) { return "Alchemy Pb1000"; } -void board_reset(void) +static void board_reset(char *c) { + asm volatile ("jr %0" : : "r" (0xbfc00000)); } -void __init board_init_irq(void) +static void board_power_off(void) { - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); + printk(KERN_ALERT "It's now safe to remove power\n"); + while (1) + asm volatile (".set mips3 ; wait ; .set mips1"); } void __init board_setup(void) @@ -57,14 +58,8 @@ void __init board_setup(void) u32 sys_freqctrl, sys_clksrc; u32 prid = read_c0_prid(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif + sys_freqctrl = 0; + sys_clksrc = 0; /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); @@ -192,4 +187,21 @@ void __init board_setup(void) au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL); break; } + + pm_power_off = board_power_off; + _machine_halt = board_power_off; + _machine_restart = board_reset; +} + +static int __init pb1000_init_irq(void) +{ + set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW); + return 0; +} +arch_initcall(pb1000_init_irq); + +static int __init pb1000_device_init(void) +{ + return db1x_register_norflash(8 * 1024 * 1024, 4, 0); } +device_initcall(pb1000_device_init); diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile index c586dd7e91dc..7e3756c83fe5 100644 --- a/arch/mips/alchemy/devboards/pb1100/Makefile +++ b/arch/mips/alchemy/devboards/pb1100/Makefile @@ -5,4 +5,4 @@ # Makefile for the Alchemy Semiconductor Pb1100 board. # -obj-y := board_setup.o +obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c index 61263081ef58..90dda5f3ecc5 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c @@ -29,63 +29,22 @@ #include <linux/interrupt.h> #include <asm/mach-au1x00/au1000.h> -#include <asm/mach-pb1x00/pb1100.h> +#include <asm/mach-db1x00/bcsr.h> #include <prom.h> -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_9, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */ - { AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */ - { AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */ - { AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */ -}; - - const char *get_system_type(void) { return "Alchemy Pb1100"; } -void board_reset(void) -{ - /* Hit BCSR.RST_VDDI[SOFT_RESET] */ - au_writel(0x00000000, PB1100_RST_VDDI); -} - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} - void __init board_setup(void) { volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - -#ifdef CONFIG_FB_AU1100 - argptr = strstr(argptr, "video="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } -#endif -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); @@ -155,3 +114,14 @@ void __init board_setup(void) au_sync(); } } + +static int __init pb1100_init_irq(void) +{ + set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */ + set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */ + set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */ + set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */ + + return 0; +} +arch_initcall(pb1100_init_irq); diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c new file mode 100644 index 000000000000..2c8dc29759fd --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1100/platform.c @@ -0,0 +1,50 @@ +/* + * Pb1100 board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> + +#include "../platform.h" + +static int __init pb1100_dev_init(void) +{ + int swapped; + + /* PCMCIA. single socket, identical to Pb1500 */ + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1100_GPIO11_INT, /* card */ + AU1100_GPIO9_INT, /* insert */ + /*AU1100_GPIO10_INT*/0, /* stschg */ + 0, /* eject */ + 0); /* id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + + return 0; +} +device_initcall(pb1100_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile index c8c3a99fb68a..2ea9b02ef09f 100644 --- a/arch/mips/alchemy/devboards/pb1200/Makefile +++ b/arch/mips/alchemy/devboards/pb1200/Makefile @@ -2,6 +2,6 @@ # Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. # -obj-y := board_setup.o irqmap.o platform.o +obj-y := board_setup.o platform.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c index 94e6b7e7753d..8b4466f2d44a 100644 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c @@ -25,38 +25,34 @@ */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/sched.h> -#include <prom.h> -#include <au1xxx.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> + +#ifdef CONFIG_MIPS_PB1200 +#include <asm/mach-pb1x00/pb1200.h> +#endif +#ifdef CONFIG_MIPS_DB1200 +#include <asm/mach-db1x00/db1200.h> +#define PB1200_INT_BEGIN DB1200_INT_BEGIN +#define PB1200_INT_END DB1200_INT_END +#endif + +#include <prom.h> const char *get_system_type(void) { return "Alchemy Pb1200"; } -void board_reset(void) -{ - bcsr->resets = 0; - bcsr->system = 0; -} - void __init board_setup(void) { - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif -#ifdef CONFIG_FB_AU1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif + printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); + bcsr_init(PB1200_BCSR_PHYS_ADDR, + PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); #if 0 { @@ -82,7 +78,7 @@ void __init board_setup(void) u32 pin_func; /* Select SMBus in CPLD */ - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); pin_func = au_readl(SYS_PINFUNC); au_sync(); @@ -116,38 +112,54 @@ void __init board_setup(void) /* * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI + * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI */ #ifdef CONFIG_I2C_AU1550 - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); #endif au_sync(); +} -#ifdef CONFIG_MIPS_PB1200 - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1200 - printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); -#endif +static int __init pb1200_init_irq(void) +{ + /* We have a problem with CPLD rev 3. */ + if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); + printk(KERN_ERR "updated to latest revision. This software will\n"); + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + panic("Game over. Your score is 0."); + } + + set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); + bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); + + return 0; } +arch_initcall(pb1200_init_irq); + int board_au1200fb_panel(void) { - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - int p; - - p = bcsr->switches; - p >>= 8; - p &= 0x0F; - return p; + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; } int board_au1200fb_panel_init(void) { /* Apply power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ return 0; } @@ -155,10 +167,8 @@ int board_au1200fb_panel_init(void) int board_au1200fb_panel_shutdown(void) { /* Remove power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ return 0; } diff --git a/arch/mips/alchemy/devboards/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c deleted file mode 100644 index fe47498da280..000000000000 --- a/arch/mips/alchemy/devboards/pb1200/irqmap.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/mach-au1x00/au1000.h> - -#ifdef CONFIG_MIPS_PB1200 -#include <asm/mach-pb1x00/pb1200.h> -#endif - -#ifdef CONFIG_MIPS_DB1200 -#include <asm/mach-db1x00/db1200.h> -#define PB1200_INT_BEGIN DB1200_INT_BEGIN -#define PB1200_INT_END DB1200_INT_END -#endif - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - /* This is external interrupt cascade */ - { AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 }, -}; - - -/* - * Support for External interrupts on the Pb1200 Development platform. - */ - -static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d) -{ - unsigned short bisr = bcsr->int_status; - - for ( ; bisr; bisr &= bisr - 1) - generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr)); -} - -/* NOTE: both the enable and mask bits must be cleared, otherwise the - * CPLD generates tons of spurious interrupts (at least on the DB1200). - */ -static void pb1200_mask_irq(unsigned int irq_nr) -{ - bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); - au_sync(); -} - -static void pb1200_maskack_irq(unsigned int irq_nr) -{ - bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN); /* ack */ - au_sync(); -} - -static void pb1200_unmask_irq(unsigned int irq_nr) -{ - bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN); - au_sync(); -} - -static struct irq_chip pb1200_cpld_irq_type = { -#ifdef CONFIG_MIPS_PB1200 - .name = "Pb1200 Ext", -#endif -#ifdef CONFIG_MIPS_DB1200 - .name = "Db1200 Ext", -#endif - .mask = pb1200_mask_irq, - .mask_ack = pb1200_maskack_irq, - .unmask = pb1200_unmask_irq, -}; - -void __init board_init_irq(void) -{ - unsigned int irq; - - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); - -#ifdef CONFIG_MIPS_PB1200 - /* We have a problem with CPLD rev 3. */ - if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) { - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); - printk(KERN_ERR "updated to latest revision. This software will\n"); - printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - panic("Game over. Your score is 0."); - } -#endif - /* mask & disable & ack all */ - bcsr->intclr_mask = 0xffff; - bcsr->intclr = 0xffff; - bcsr->int_status = 0xffff; - au_sync(); - - for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) - set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type, - handle_level_irq, "level"); - - set_irq_chained_handler(AU1000_GPIO_7, pb1200_cascade_handler); -} diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c index b93dff4a6789..3ef2dceeb796 100644 --- a/arch/mips/alchemy/devboards/pb1200/platform.c +++ b/arch/mips/alchemy/devboards/pb1200/platform.c @@ -26,27 +26,30 @@ #include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-db1x00/bcsr.h> + +#include "../platform.h" static int mmc_activity; static void pb1200mmc0_set_power(void *mmc_host, int state) { if (state) - bcsr->board |= BCSR_BOARD_SD0PWR; + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); else - bcsr->board &= ~BCSR_BOARD_SD0PWR; + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); - au_sync_delay(1); + msleep(1); } static int pb1200mmc0_card_readonly(void *mmc_host) { - return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0; + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; } static int pb1200mmc0_card_inserted(void *mmc_host) { - return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0; + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; } static void pb1200_mmcled_set(struct led_classdev *led, @@ -54,10 +57,10 @@ static void pb1200_mmcled_set(struct led_classdev *led, { if (brightness != LED_OFF) { if (++mmc_activity == 1) - bcsr->disk_leds &= ~(1 << 8); + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); } else { if (--mmc_activity == 0) - bcsr->disk_leds |= (1 << 8); + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); } } @@ -65,27 +68,25 @@ static struct led_classdev pb1200mmc_led = { .brightness_set = pb1200_mmcled_set, }; -#ifndef CONFIG_MIPS_DB1200 static void pb1200mmc1_set_power(void *mmc_host, int state) { if (state) - bcsr->board |= BCSR_BOARD_SD1PWR; + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); else - bcsr->board &= ~BCSR_BOARD_SD1PWR; + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); - au_sync_delay(1); + msleep(1); } static int pb1200mmc1_card_readonly(void *mmc_host) { - return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0; + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; } static int pb1200mmc1_card_inserted(void *mmc_host) { - return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0; + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; } -#endif const struct au1xmmc_platform_data au1xmmc_platdata[2] = { [0] = { @@ -95,7 +96,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = { .cd_setup = NULL, /* use poll-timer in driver */ .led = &pb1200mmc_led, }, -#ifndef CONFIG_MIPS_DB1200 [1] = { .set_power = pb1200mmc1_set_power, .card_inserted = pb1200mmc1_card_inserted, @@ -103,7 +103,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = { .cd_setup = NULL, /* use poll-timer in driver */ .led = &pb1200mmc_led, }, -#endif }; static struct resource ide_resources[] = { @@ -169,8 +168,36 @@ static struct platform_device *board_platform_devices[] __initdata = { static int __init board_register_devices(void) { + int swapped; + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + PB1200_PC0_INT, + PB1200_PC0_INSERT_INT, + /*PB1200_PC0_STSCHG_INT*/0, + PB1200_PC0_EJECT_INT, + 0); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000, + PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, + PCMCIA_MEM_PHYS_ADDR + 0x008000000, + PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, + PCMCIA_IO_PHYS_ADDR + 0x008000000, + PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, + PB1200_PC1_INT, + PB1200_PC1_INSERT_INT, + /*PB1200_PC1_STSCHG_INT*/0, + PB1200_PC1_EJECT_INT, + 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(128 * 1024 * 1024, 2, swapped); + return platform_add_devices(board_platform_devices, ARRAY_SIZE(board_platform_devices)); } - -arch_initcall(board_register_devices); +device_initcall(board_register_devices); diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile index 173b419a7479..e83b151b5b63 100644 --- a/arch/mips/alchemy/devboards/pb1500/Makefile +++ b/arch/mips/alchemy/devboards/pb1500/Makefile @@ -5,4 +5,4 @@ # Makefile for the Alchemy Semiconductor Pb1500 board. # -obj-y := board_setup.o +obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index d7a56569e7ed..9cd9dfa698e7 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -29,22 +29,14 @@ #include <linux/interrupt.h> #include <asm/mach-au1x00/au1000.h> -#include <asm/mach-pb1x00/pb1500.h> +#include <asm/mach-db1x00/bcsr.h> #include <prom.h> char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 }, - { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 }, + [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */ + [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ }; @@ -53,37 +45,13 @@ const char *get_system_type(void) return "Alchemy Pb1500"; } -void board_reset(void) -{ - /* Hit BCSR.RST_VDDI[SOFT_RESET] */ - au_writel(0x00000000, PB1500_RST_VDDI); -} - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} - void __init board_setup(void) { u32 pin_func; u32 sys_freqctrl, sys_clksrc; - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); sys_clksrc = sys_freqctrl = pin_func = 0; /* Set AUX clock to 12 MHz * 8 = 96 MHz */ @@ -163,3 +131,18 @@ void __init board_setup(void) au_sync(); } } + +static int __init pb1500_init_irq(void) +{ + set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ + set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); + set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + + return 0; +} +arch_initcall(pb1500_init_irq); diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c new file mode 100644 index 000000000000..d443bc7aa76e --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1500/platform.c @@ -0,0 +1,49 @@ +/* + * Pb1500 board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> + +#include "../platform.h" + +static int __init pb1500_dev_init(void) +{ + int swapped; + + /* PCMCIA. single socket, identical to Pb1500 */ + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1500_GPIO11_INT, /* card */ + AU1500_GPIO9_INT, /* insert */ + /*AU1500_GPIO10_INT*/0, /* stschg */ + 0, /* eject */ + 0); /* id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + + return 0; +} +device_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile index cff95bcdb2ca..9661b6ec5dd3 100644 --- a/arch/mips/alchemy/devboards/pb1550/Makefile +++ b/arch/mips/alchemy/devboards/pb1550/Makefile @@ -5,4 +5,4 @@ # Makefile for the Alchemy Semiconductor Pb1550 board. # -obj-y := board_setup.o +obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c index b6e9e7d247a3..9d7d6edafa8d 100644 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c @@ -32,18 +32,15 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-pb1x00/pb1550.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-au1x00/gpio.h> #include <prom.h> char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, + [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ }; const char *get_system_type(void) @@ -51,30 +48,14 @@ const char *get_system_type(void) return "Alchemy Pb1550"; } -void board_reset(void) -{ - /* Hit BCSR.SYSTEM[RESET] */ - au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C); -} - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} - void __init board_setup(void) { u32 pin_func; -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr; - argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif + bcsr_init(PB1550_BCSR_PHYS_ADDR, + PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); + + alchemy_gpio2_enable(); /* * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, @@ -85,8 +66,21 @@ void __init board_setup(void) pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; au_writel(pin_func, SYS_PINFUNC); - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); + bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); } + +static int __init pb1550_init_irq(void) +{ + set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); + + /* enable both PCMCIA card irqs in the shared line */ + alchemy_gpio2_enable_int(201); + alchemy_gpio2_enable_int(202); + + return 0; +} +arch_initcall(pb1550_init_irq); diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c new file mode 100644 index 000000000000..d7150d0f49c0 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1550/platform.c @@ -0,0 +1,69 @@ +/* + * Pb1550 board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1550.h> +#include <asm/mach-db1x00/bcsr.h> + +#include "../platform.h" + +static int __init pb1550_dev_init(void) +{ + int swapped; + + /* Pb1550, like all others, also has statuschange irqs; however they're + * wired up on one of the Au1550's shared GPIO201_205 line, which also + * services the PCMCIA card interrupts. So we ignore statuschange and + * use the GPIO201_205 exclusively for card interrupts, since a) pcmcia + * drivers are used to shared irqs and b) statuschange isn't really use- + * ful anyway. + */ + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1550_GPIO201_205_INT, + AU1550_GPIO0_INT, + 0, + 0, + 0); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000, + PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, + PCMCIA_MEM_PHYS_ADDR + 0x008000000, + PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, + PCMCIA_IO_PHYS_ADDR + 0x008000000, + PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, + AU1550_GPIO201_205_INT, + AU1550_GPIO1_INT, + 0, + 0, + 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT; + db1x_register_norflash(128 * 1024 * 1024, 4, swapped); + + return 0; +} +device_initcall(pb1550_dev_init); diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c new file mode 100644 index 000000000000..49a4b3244d8e --- /dev/null +++ b/arch/mips/alchemy/devboards/platform.c @@ -0,0 +1,222 @@ +/* + * devoard misc stuff. + */ + +#include <linux/init.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/pm.h> + +#include <asm/reboot.h> +#include <asm/mach-db1x00/bcsr.h> + +static void db1x_power_off(void) +{ + bcsr_write(BCSR_RESETS, 0); + bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET); +} + +static void db1x_reset(char *c) +{ + bcsr_write(BCSR_RESETS, 0); + bcsr_write(BCSR_SYSTEM, 0); +} + +static int __init db1x_poweroff_setup(void) +{ + if (!pm_power_off) + pm_power_off = db1x_power_off; + if (!_machine_halt) + _machine_halt = db1x_power_off; + if (!_machine_restart) + _machine_restart = db1x_reset; + + return 0; +} +late_initcall(db1x_poweroff_setup); + +/* register a pcmcia socket */ +int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start, + phys_addr_t pcmcia_attr_end, + phys_addr_t pcmcia_mem_start, + phys_addr_t pcmcia_mem_end, + phys_addr_t pcmcia_io_start, + phys_addr_t pcmcia_io_end, + int card_irq, + int cd_irq, + int stschg_irq, + int eject_irq, + int id) +{ + int cnt, i, ret; + struct resource *sr; + struct platform_device *pd; + + cnt = 5; + if (eject_irq) + cnt++; + if (stschg_irq) + cnt++; + + sr = kzalloc(sizeof(struct resource) * cnt, GFP_KERNEL); + if (!sr) + return -ENOMEM; + + pd = platform_device_alloc("db1xxx_pcmcia", id); + if (!pd) { + ret = -ENOMEM; + goto out; + } + + sr[0].name = "pcmcia-attr"; + sr[0].flags = IORESOURCE_MEM; + sr[0].start = pcmcia_attr_start; + sr[0].end = pcmcia_attr_end; + + sr[1].name = "pcmcia-mem"; + sr[1].flags = IORESOURCE_MEM; + sr[1].start = pcmcia_mem_start; + sr[1].end = pcmcia_mem_end; + + sr[2].name = "pcmcia-io"; + sr[2].flags = IORESOURCE_MEM; + sr[2].start = pcmcia_io_start; + sr[2].end = pcmcia_io_end; + + sr[3].name = "insert"; + sr[3].flags = IORESOURCE_IRQ; + sr[3].start = sr[3].end = cd_irq; + + sr[4].name = "card"; + sr[4].flags = IORESOURCE_IRQ; + sr[4].start = sr[4].end = card_irq; + + i = 5; + if (stschg_irq) { + sr[i].name = "stschg"; + sr[i].flags = IORESOURCE_IRQ; + sr[i].start = sr[i].end = stschg_irq; + i++; + } + if (eject_irq) { + sr[i].name = "eject"; + sr[i].flags = IORESOURCE_IRQ; + sr[i].start = sr[i].end = eject_irq; + } + + pd->resource = sr; + pd->num_resources = cnt; + + ret = platform_device_add(pd); + if (!ret) + return 0; + + platform_device_put(pd); +out: + kfree(sr); + return ret; +} + +#define YAMON_SIZE 0x00100000 +#define YAMON_ENV_SIZE 0x00040000 + +int __init db1x_register_norflash(unsigned long size, int width, + int swapped) +{ + struct physmap_flash_data *pfd; + struct platform_device *pd; + struct mtd_partition *parts; + struct resource *res; + int ret, i; + + if (size < (8 * 1024 * 1024)) + return -EINVAL; + + ret = -ENOMEM; + parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL); + if (!parts) + goto out; + + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + if (!res) + goto out1; + + pfd = kzalloc(sizeof(struct physmap_flash_data), GFP_KERNEL); + if (!pfd) + goto out2; + + pd = platform_device_alloc("physmap-flash", 0); + if (!pd) + goto out3; + + /* NOR flash ends at 0x20000000, regardless of size */ + res->start = 0x20000000 - size; + res->end = 0x20000000 - 1; + res->flags = IORESOURCE_MEM; + + /* partition setup. Most Develboards have a switch which allows + * to swap the physical locations of the 2 NOR flash banks. + */ + i = 0; + if (!swapped) { + /* first NOR chip */ + parts[i].offset = 0; + parts[i].name = "User FS"; + parts[i].size = size / 2; + i++; + } + + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "User FS 2"; + parts[i].size = (size / 2) - (0x20000000 - 0x1fc00000); + i++; + + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "YAMON"; + parts[i].size = YAMON_SIZE; + parts[i].mask_flags = MTD_WRITEABLE; + i++; + + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "raw kernel"; + parts[i].size = 0x00400000 - YAMON_SIZE - YAMON_ENV_SIZE; + i++; + + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "YAMON Env"; + parts[i].size = YAMON_ENV_SIZE; + parts[i].mask_flags = MTD_WRITEABLE; + i++; + + if (swapped) { + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "User FS"; + parts[i].size = size / 2; + i++; + } + + pfd->width = width; + pfd->parts = parts; + pfd->nr_parts = 5; + + pd->dev.platform_data = pfd; + pd->resource = res; + pd->num_resources = 1; + + ret = platform_device_add(pd); + if (!ret) + return ret; + + platform_device_put(pd); +out3: + kfree(pfd); +out2: + kfree(res); +out1: + kfree(parts); +out: + return ret; +} diff --git a/arch/mips/alchemy/devboards/platform.h b/arch/mips/alchemy/devboards/platform.h new file mode 100644 index 000000000000..5ac055d2cda9 --- /dev/null +++ b/arch/mips/alchemy/devboards/platform.h @@ -0,0 +1,21 @@ +#ifndef _DEVBOARD_PLATFORM_H_ +#define _DEVBOARD_PLATFORM_H_ + +#include <linux/init.h> + +int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start, + phys_addr_t pcmcia_attr_len, + phys_addr_t pcmcia_mem_start, + phys_addr_t pcmcia_mem_end, + phys_addr_t pcmcia_io_start, + phys_addr_t pcmcia_io_end, + int card_irq, + int cd_irq, + int stschg_irq, + int eject_irq, + int id); + +int __init db1x_register_norflash(unsigned long size, int width, + int swapped); + +#endif diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c index 632f9862a0fb..4bbd3133e451 100644 --- a/arch/mips/alchemy/devboards/pm.c +++ b/arch/mips/alchemy/devboards/pm.c @@ -10,6 +10,7 @@ #include <linux/sysfs.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/gpio.h> +#include <asm/mach-db1x00/bcsr.h> /* * Generic suspend userspace interface for Alchemy development boards. @@ -26,6 +27,20 @@ static unsigned long db1x_pm_last_wakesrc; static int db1x_pm_enter(suspend_state_t state) { + unsigned short bcsrs[16]; + int i, j, hasint; + + /* save CPLD regs */ + hasint = bcsr_read(BCSR_WHOAMI); + hasint = BCSR_WHOAMI_BOARD(hasint) >= BCSR_WHOAMI_DB1200; + j = (hasint) ? BCSR_MASKSET : BCSR_SYSTEM; + + for (i = BCSR_STATUS; i <= j; i++) + bcsrs[i] = bcsr_read(i); + + /* shut off hexleds */ + bcsr_write(BCSR_HEXCLEAR, 3); + /* enable GPIO based wakeup */ alchemy_gpio1_input_enable(); @@ -52,6 +67,23 @@ static int db1x_pm_enter(suspend_state_t state) /* ...and now the sandman can come! */ au_sleep(); + + /* restore CPLD regs */ + for (i = BCSR_STATUS; i <= BCSR_SYSTEM; i++) + bcsr_write(i, bcsrs[i]); + + /* restore CPLD int registers */ + if (hasint) { + bcsr_write(BCSR_INTCLR, 0xffff); + bcsr_write(BCSR_MASKCLR, 0xffff); + bcsr_write(BCSR_INTSTAT, 0xffff); + bcsr_write(BCSR_INTSET, bcsrs[BCSR_INTSET]); + bcsr_write(BCSR_MASKSET, bcsrs[BCSR_MASKSET]); + } + + /* light up hexleds */ + bcsr_write(BCSR_HEXCLEAR, 0); + return 0; } diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index 0042bd6b1d7d..b30df5c97ad3 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -60,3 +60,8 @@ void __init prom_init(void) strict_strtoul(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(UART0_PHYS_ADDR, c); +} diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile index 7c67b3d33bec..4a53815b3c6c 100644 --- a/arch/mips/alchemy/mtx-1/Makefile +++ b/arch/mips/alchemy/mtx-1/Makefile @@ -6,7 +6,7 @@ # Makefile for 4G Systems MTX-1 board. # -lib-y := init.o board_setup.o irqmap.o +lib-y := init.o board_setup.o obj-y := platform.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index 45b61c9b82b9..52d883d37dd7 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -30,34 +30,43 @@ #include <linux/gpio.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <asm/reboot.h> #include <asm/mach-au1x00/au1000.h> #include <prom.h> +char irq_tab_alchemy[][5] __initdata = { + [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ + [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */ + [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ + [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */ + [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ +}; + extern int (*board_pci_idsel)(unsigned int devsel, int assert); int mtx1_pci_idsel(unsigned int devsel, int assert); -void board_reset(void) +static void mtx1_reset(char *c) { /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ au_writel(0x00000000, 0xAE00001C); } -void __init board_setup(void) +static void mtx1_power_off(void) { -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr; - argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - - alchemy_gpio2_enable(); + printk(KERN_ALERT "It's now safe to remove power\n"); + while (1) + asm volatile (".set mips3 ; wait ; .set mips1"); +} +void __init board_setup(void) +{ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) /* Enable USB power switch */ alchemy_gpio_direction_output(204, 0); @@ -86,6 +95,10 @@ void __init board_setup(void) alchemy_gpio_direction_output(211, 1); /* green on */ alchemy_gpio_direction_output(212, 0); /* red off */ + pm_power_off = mtx1_power_off; + _machine_halt = mtx1_power_off; + _machine_restart = mtx1_reset; + printk(KERN_INFO "4G Systems MTX-1 Board\n"); } @@ -102,10 +115,22 @@ mtx1_pci_idsel(unsigned int devsel, int assert) if (assert && devsel != 0) /* Suppress signal to Cardbus */ - gpio_set_value(1, 0); /* set EXT_IO3 OFF */ + alchemy_gpio_set_value(1, 0); /* set EXT_IO3 OFF */ else - gpio_set_value(1, 1); /* set EXT_IO3 ON */ + alchemy_gpio_set_value(1, 1); /* set EXT_IO3 ON */ - au_sync_udelay(1); + udelay(1); return 1; } + +static int __init mtx1_init_irq(void) +{ + set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); + set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + + return 0; +} +arch_initcall(mtx1_init_irq); diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c index 5e871c8d9e96..f8d25575fa05 100644 --- a/arch/mips/alchemy/mtx-1/init.c +++ b/arch/mips/alchemy/mtx-1/init.c @@ -32,6 +32,7 @@ #include <linux/init.h> #include <asm/bootinfo.h> +#include <asm/mach-au1x00/au1000.h> #include <prom.h> @@ -58,3 +59,8 @@ void __init prom_init(void) strict_strtoul(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(UART0_PHYS_ADDR, c); +} diff --git a/arch/mips/alchemy/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c deleted file mode 100644 index f1ab12ab3433..000000000000 --- a/arch/mips/alchemy/mtx-1/irqmap.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <asm/mach-au1x00/au1000.h> - -char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ - [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */ - [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ - [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */ - [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 }, - { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 }, -}; - - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile index db3c526f64d8..4dc81d794cb8 100644 --- a/arch/mips/alchemy/xxs1500/Makefile +++ b/arch/mips/alchemy/xxs1500/Makefile @@ -5,4 +5,6 @@ # Makefile for MyCable XXS1500 board. # -lib-y := init.o board_setup.o irqmap.o +lib-y := init.o board_setup.o platform.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index 4de2d48caed8..47b42927607b 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -25,31 +25,35 @@ #include <linux/gpio.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/pm.h> +#include <asm/reboot.h> #include <asm/mach-au1x00/au1000.h> #include <prom.h> -void board_reset(void) +static void xxs1500_reset(char *c) { /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ au_writel(0x00000000, 0xAE00001C); } +static void xxs1500_power_off(void) +{ + printk(KERN_ALERT "It's now safe to remove power\n"); + while (1) + asm volatile (".set mips3 ; wait ; .set mips1"); +} + void __init board_setup(void) { u32 pin_func; -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr; - argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif + pm_power_off = xxs1500_power_off; + _machine_halt = xxs1500_power_off; + _machine_restart = xxs1500_reset; alchemy_gpio1_input_enable(); alchemy_gpio2_enable(); @@ -68,22 +72,6 @@ void __init board_setup(void) /* Enable DTR = USB power up */ au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ -#ifdef CONFIG_PCMCIA_XXS1500 - /* GPIO 0, 1, and 4 are inputs */ - alchemy_gpio_direction_input(0); - alchemy_gpio_direction_input(1); - alchemy_gpio_direction_input(4); - - /* GPIO2 208/9/10/11 are inputs */ - alchemy_gpio_direction_input(208); - alchemy_gpio_direction_input(209); - alchemy_gpio_direction_input(210); - alchemy_gpio_direction_input(211); - - /* Turn off power */ - alchemy_gpio_direction_output(214, 0); -#endif - #ifdef CONFIG_PCI #if defined(__MIPSEB__) au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); @@ -92,3 +80,23 @@ void __init board_setup(void) #endif #endif } + +static int __init xxs1500_init_irq(void) +{ + set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); + set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW); + + set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */ + set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); + + return 0; +} +arch_initcall(xxs1500_init_irq); diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c index 456fa142c093..15125c2fda7d 100644 --- a/arch/mips/alchemy/xxs1500/init.c +++ b/arch/mips/alchemy/xxs1500/init.c @@ -30,6 +30,7 @@ #include <linux/kernel.h> #include <asm/bootinfo.h> +#include <asm/mach-au1x00/au1000.h> #include <prom.h> @@ -56,3 +57,8 @@ void __init prom_init(void) strict_strtoul(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(UART0_PHYS_ADDR, c); +} diff --git a/arch/mips/alchemy/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c deleted file mode 100644 index 0f0f3012e5fd..000000000000 --- a/arch/mips/alchemy/xxs1500/irqmap.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <asm/mach-au1x00/au1000.h> - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 }, - { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 }, - - { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */ - { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, -}; - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c new file mode 100644 index 000000000000..e87c45cde61b --- /dev/null +++ b/arch/mips/alchemy/xxs1500/platform.c @@ -0,0 +1,63 @@ +/* + * XXS1500 board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-au1x00/au1000.h> + +static struct resource xxs1500_pcmcia_res[] = { + { + .name = "pcmcia-io", + .flags = IORESOURCE_MEM, + .start = PCMCIA_IO_PHYS_ADDR, + .end = PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-attr", + .flags = IORESOURCE_MEM, + .start = PCMCIA_ATTR_PHYS_ADDR, + .end = PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-mem", + .flags = IORESOURCE_MEM, + .start = PCMCIA_MEM_PHYS_ADDR, + .end = PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + }, +}; + +static struct platform_device xxs1500_pcmcia_dev = { + .name = "xxs1500_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res), + .resource = xxs1500_pcmcia_res, +}; + +static struct platform_device *xxs1500_devs[] __initdata = { + &xxs1500_pcmcia_dev, +}; + +static int __init xxs1500_dev_init(void) +{ + return platform_add_devices(xxs1500_devs, + ARRAY_SIZE(xxs1500_devs)); +} +device_initcall(xxs1500_dev_init); |