diff options
Diffstat (limited to 'arch/mips/alchemy/xxs1500/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/xxs1500/board_setup.c | 60 |
1 files changed, 34 insertions, 26 deletions
diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index 4de2d48caed8..47b42927607b 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -25,31 +25,35 @@ #include <linux/gpio.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/pm.h> +#include <asm/reboot.h> #include <asm/mach-au1x00/au1000.h> #include <prom.h> -void board_reset(void) +static void xxs1500_reset(char *c) { /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ au_writel(0x00000000, 0xAE00001C); } +static void xxs1500_power_off(void) +{ + printk(KERN_ALERT "It's now safe to remove power\n"); + while (1) + asm volatile (".set mips3 ; wait ; .set mips1"); +} + void __init board_setup(void) { u32 pin_func; -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr; - argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif + pm_power_off = xxs1500_power_off; + _machine_halt = xxs1500_power_off; + _machine_restart = xxs1500_reset; alchemy_gpio1_input_enable(); alchemy_gpio2_enable(); @@ -68,22 +72,6 @@ void __init board_setup(void) /* Enable DTR = USB power up */ au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ -#ifdef CONFIG_PCMCIA_XXS1500 - /* GPIO 0, 1, and 4 are inputs */ - alchemy_gpio_direction_input(0); - alchemy_gpio_direction_input(1); - alchemy_gpio_direction_input(4); - - /* GPIO2 208/9/10/11 are inputs */ - alchemy_gpio_direction_input(208); - alchemy_gpio_direction_input(209); - alchemy_gpio_direction_input(210); - alchemy_gpio_direction_input(211); - - /* Turn off power */ - alchemy_gpio_direction_output(214, 0); -#endif - #ifdef CONFIG_PCI #if defined(__MIPSEB__) au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); @@ -92,3 +80,23 @@ void __init board_setup(void) #endif #endif } + +static int __init xxs1500_init_irq(void) +{ + set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); + set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW); + + set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */ + set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); + + return 0; +} +arch_initcall(xxs1500_init_irq); |