diff options
Diffstat (limited to 'arch/mips/alchemy/common/dma.c')
| -rw-r--r-- | arch/mips/alchemy/common/dma.c | 46 |
1 files changed, 25 insertions, 21 deletions
diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c index d5278877891d..347980e79a89 100644 --- a/arch/mips/alchemy/common/dma.c +++ b/arch/mips/alchemy/common/dma.c @@ -58,6 +58,9 @@ * returned from request_dma. */ +/* DMA Channel register block spacing */ +#define DMA_CHANNEL_LEN 0x00000100 + DEFINE_SPINLOCK(au1000_dma_spin_lock); struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = { @@ -77,22 +80,23 @@ static const struct dma_dev { unsigned int fifo_addr; unsigned int dma_mode; } dma_dev_table[DMA_NUM_DEV] = { - {UART0_ADDR + UART_TX, 0}, - {UART0_ADDR + UART_RX, 0}, - {0, 0}, - {0, 0}, - {AC97C_DATA, DMA_DW16 }, /* coherent */ - {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */ - {UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC}, - {UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP0WR, DMA_DW8 | DMA_NC}, - {USBD_EP2WR, DMA_DW8 | DMA_NC}, - {USBD_EP3WR, DMA_DW8 | DMA_NC}, - {USBD_EP4RD, DMA_DR | DMA_DW8 | DMA_NC}, - {USBD_EP5RD, DMA_DR | DMA_DW8 | DMA_NC}, - {I2S_DATA, DMA_DW32 | DMA_NC}, - {I2S_DATA, DMA_DR | DMA_DW32 | DMA_NC} + { AU1000_UART0_PHYS_ADDR + 0x04, DMA_DW8 }, /* UART0_TX */ + { AU1000_UART0_PHYS_ADDR + 0x00, DMA_DW8 | DMA_DR }, /* UART0_RX */ + { 0, 0 }, /* DMA_REQ0 */ + { 0, 0 }, /* DMA_REQ1 */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 }, /* AC97 TX c */ + { AU1000_AC97_PHYS_ADDR + 0x08, DMA_DW16 | DMA_DR }, /* AC97 RX c */ + { AU1000_UART3_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* UART3_TX */ + { AU1000_UART3_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* UART3_RX */ + { AU1000_USBD_PHYS_ADDR + 0x00, DMA_DW8 | DMA_NC | DMA_DR }, /* EP0RD */ + { AU1000_USBD_PHYS_ADDR + 0x04, DMA_DW8 | DMA_NC }, /* EP0WR */ + { AU1000_USBD_PHYS_ADDR + 0x08, DMA_DW8 | DMA_NC }, /* EP2WR */ + { AU1000_USBD_PHYS_ADDR + 0x0c, DMA_DW8 | DMA_NC }, /* EP3WR */ + { AU1000_USBD_PHYS_ADDR + 0x10, DMA_DW8 | DMA_NC | DMA_DR }, /* EP4RD */ + { AU1000_USBD_PHYS_ADDR + 0x14, DMA_DW8 | DMA_NC | DMA_DR }, /* EP5RD */ + /* on Au1500, these 2 are DMA_REQ2/3 (GPIO208/209) instead! */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC}, /* I2S TX */ + { AU1000_I2S_PHYS_ADDR + 0x00, DMA_DW32 | DMA_NC | DMA_DR}, /* I2S RX */ }; int au1000_dma_read_proc(char *buf, char **start, off_t fpos, @@ -123,10 +127,10 @@ int au1000_dma_read_proc(char *buf, char **start, off_t fpos, /* Device FIFO addresses and default DMA modes - 2nd bank */ static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = { - { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */ - { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */ - { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */ + { AU1100_SD0_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD0_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x00, DMA_DS | DMA_DW8 }, /* coherent */ + { AU1100_SD1_PHYS_ADDR + 0x04, DMA_DS | DMA_DW8 | DMA_DR } /* coherent */ }; void dump_au1000_dma_channel(unsigned int dmanr) @@ -202,7 +206,7 @@ int request_au1000_dma(int dev_id, const char *dev_str, } /* fill it in */ - chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN; + chan->io = KSEG1ADDR(AU1000_DMA_PHYS_ADDR) + i * DMA_CHANNEL_LEN; chan->dev_id = dev_id; chan->dev_str = dev_str; chan->fifo_addr = dev->fifo_addr; |