diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 111 |
1 files changed, 22 insertions, 89 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 63183a8454d6..787290781b8c 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -25,6 +25,7 @@ config MIPS select GENERIC_IOMAP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW + select GENERIC_ISA_DMA if EISA select GENERIC_LIB_ASHLDI3 select GENERIC_LIB_ASHRDI3 select GENERIC_LIB_CMPDI2 @@ -74,6 +75,7 @@ config MIPS select HAVE_SYSCALL_TRACEPOINTS select HAVE_VIRT_CPU_ACCOUNTING_GEN if 64BIT || !SMP select IRQ_FORCED_THREADING + select ISA if EISA select MODULES_USE_ELF_RELA if MODULES && 64BIT select MODULES_USE_ELF_REL if MODULES select PERF_USE_VMALLOC @@ -98,7 +100,7 @@ config MIPS_GENERIC select CPU_MIPSR2_IRQ_EI select CSRC_R4K select DMA_PERDEV_COHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select LIBFDT select MIPS_AUTO_PFN_OFFSET @@ -259,7 +261,7 @@ config BCM47XX select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SYS_HAS_CPU_MIPS32_R1 select NO_EXCEPT_FILL @@ -302,13 +304,12 @@ config MIPS_COBALT select CSRC_R4K select CEVT_GT641XX select DMA_NONCOHERENT - select HW_HAS_PCI + select FORCE_PCI select I8253 select I8259 select IRQ_MIPS_CPU select IRQ_GT641XX select PCI_GT64XXX_PCI0 - select PCI select SYS_HAS_CPU_NEVADA select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL @@ -425,7 +426,7 @@ config LASAT select CSRC_R4K select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select PCI_GT64XXX_PCI0 select MIPS_NILE4 @@ -503,7 +504,7 @@ config MIPS_MALTA select DMA_MAYBE_COHERENT select GENERIC_ISA_DMA select HAVE_PCSPKR_PLATFORM - select HW_HAS_PCI + select HAVE_PCI select I8253 select I8259 select IRQ_MIPS_CPU @@ -557,7 +558,7 @@ config MACH_PIC32 config NEC_MARKEINS bool "NEC EMMA2RH Mark-eins board" select SOC_EMMA2RH - select HW_HAS_PCI + select HAVE_PCI help This enables support for the NEC Electronics Mark-eins boards. @@ -634,7 +635,7 @@ config SGI_IP22 select CSRC_R4K select DEFAULT_SGI_PARTITION select DMA_NONCOHERENT - select HW_HAS_EISA + select HAVE_EISA select I8253 select I8259 select IP22_CPU_SCACHE @@ -674,7 +675,7 @@ config SGI_IP27 select BOOT_ELF64 select DEFAULT_SGI_PARTITION select SYS_HAS_EARLY_PRINTK - select HW_HAS_PCI + select HAVE_PCI select NR_CPUS_DEFAULT_64 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL @@ -699,7 +700,7 @@ config SGI_IP28 select DMA_NONCOHERENT select GENERIC_ISA_DMA_SUPPORT_BROKEN select IRQ_MIPS_CPU - select HW_HAS_EISA + select HAVE_EISA select I8253 select I8259 select SGI_HAS_I8042 @@ -734,7 +735,7 @@ config SGI_IP32 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select R5000_CPU_SCACHE select RM7000_CPU_SCACHE @@ -846,9 +847,9 @@ config SNI_RM select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN select DMA_NONCOHERENT select GENERIC_ISA_DMA + select HAVE_EISA select HAVE_PCSPKR_PLATFORM - select HW_HAS_EISA - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select I8253 select I8259 @@ -881,7 +882,7 @@ config MIKROTIK_RB532 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL @@ -898,7 +899,7 @@ config CAVIUM_OCTEON_SOC bool "Cavium Networks Octeon SoC based boards" select CEVT_R4K select ARCH_HAS_PHYS_TO_DMA - select HAS_RAPIDIO + select HAVE_RAPIDIO select PHYS_ADDR_T_64BIT select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN @@ -908,7 +909,7 @@ config CAVIUM_OCTEON_SOC select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN select SYS_HAS_EARLY_PRINTK select SYS_HAS_CPU_CAVIUM_OCTEON - select HW_HAS_PCI + select HAVE_PCI select ZONE_DMA32 select HOLES_IN_ZONE select GPIOLIB @@ -941,7 +942,7 @@ config NLM_XLR_BOARD select NLM_COMMON select SYS_HAS_CPU_XLR select SYS_SUPPORTS_SMP - select HW_HAS_PCI + select HAVE_PCI select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL @@ -967,7 +968,7 @@ config NLM_XLP_BOARD select NLM_COMMON select SYS_HAS_CPU_XLP select SYS_SUPPORTS_SMP - select HW_HAS_PCI + select HAVE_PCI select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select PHYS_ADDR_T_64BIT @@ -1002,7 +1003,7 @@ config MIPS_PARAVIRT select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_CPU_MIPS64_R2 select SYS_HAS_CPU_CAVIUM_OCTEON - select HW_HAS_PCI + select HAVE_PCI select SWAP_IO_SPACE help This option supports guest running under ???? @@ -3063,47 +3064,14 @@ config MIPS_AUTO_PFN_OFFSET menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" -config HW_HAS_EISA - bool -config HW_HAS_PCI - bool - -config PCI - bool "Support for PCI controller" - depends on HW_HAS_PCI - select PCI_DOMAINS - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, - say Y, otherwise N. - -config HT_PCI - bool "Support for HT-linked PCI" - default y - depends on CPU_LOONGSON3 - select PCI - select PCI_DOMAINS - help - Loongson family machines use Hyper-Transport bus for inter-core - connection and device connection. The PCI bus is a subordinate - linked at HT. Choose Y for Loongson-3 based machines. - -config PCI_DOMAINS - bool - -config PCI_DOMAINS_GENERIC - bool - config PCI_DRIVERS_GENERIC - select PCI_DOMAINS_GENERIC if PCI_DOMAINS + select PCI_DOMAINS_GENERIC if PCI bool config PCI_DRIVERS_LEGACY def_bool !PCI_DRIVERS_GENERIC select NO_GENERIC_PCI_IOPORT_MAP - -source "drivers/pci/Kconfig" + select PCI_DOMAINS if PCI # # ISA support is now enabled via select. Too many systems still have the one @@ -3113,26 +3081,6 @@ source "drivers/pci/Kconfig" config ISA bool -config EISA - bool "EISA support" - depends on HW_HAS_EISA - select ISA - select GENERIC_ISA_DMA - ---help--- - The Extended Industry Standard Architecture (EISA) bus was - developed as an open alternative to the IBM MicroChannel bus. - - The EISA bus provided some of the features of the IBM MicroChannel - bus while maintaining backward compatibility with cards made for - the older ISA bus. The EISA bus saw limited use between 1988 and - 1995 when it was made obsolete by the PCI bus. - - Say Y here if you are building a kernel for an EISA-based machine. - - Otherwise, say N. - -source "drivers/eisa/Kconfig" - config TC bool "TURBOchannel support" depends on MACH_DECSTATION @@ -3176,21 +3124,6 @@ config ZONE_DMA config ZONE_DMA32 bool -source "drivers/pcmcia/Kconfig" - -config HAS_RAPIDIO - bool - default n - -config RAPIDIO - tristate "RapidIO support" - depends on HAS_RAPIDIO || PCI - help - If you say Y here, the kernel will include drivers and - infrastructure code to support RapidIO interconnect devices. - -source "drivers/rapidio/Kconfig" - endmenu config TRAD_SIGNALS |