diff options
Diffstat (limited to 'arch/mips/Kconfig')
| -rw-r--r-- | arch/mips/Kconfig | 131 |
1 files changed, 11 insertions, 120 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 24c5dee91768..d21df5f1b1f3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -181,38 +181,6 @@ config LEMOTE_FULONG Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and an FPGA northbridge -config MIPS_ATLAS - bool "MIPS Atlas board" - select BOOT_ELF32 - select BOOT_RAW - select CEVT_R4K - select CSRC_R4K - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select IRQ_CPU - select HW_HAS_PCI - select MIPS_BOARDS_GEN - select MIPS_BONITO64 - select PCI_GT64XXX_PCI0 - select MIPS_MSC - select RM7000_CPU_SCACHE - select SWAP_IO_SPACE - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_HAS_CPU_MIPS64_R1 - select SYS_HAS_CPU_NEVADA - select SYS_HAS_CPU_RM7000 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_MULTITHREADING if EXPERIMENTAL - select SYS_SUPPORTS_SMARTMIPS - select GENERIC_HARDIRQS_NO__DO_IRQ - help - This enables support for the MIPS Technologies Atlas evaluation - board. - config MIPS_MALTA bool "MIPS Malta board" select ARCH_MAY_HAVE_PC_FDC @@ -249,26 +217,6 @@ config MIPS_MALTA This enables support for the MIPS Technologies Malta evaluation board. -config MIPS_SEAD - bool "MIPS SEAD board" - select CEVT_R4K - select CSRC_R4K - select IRQ_CPU - select DMA_NONCOHERENT - select SYS_HAS_EARLY_PRINTK - select MIPS_BOARDS_GEN - select SYS_HAS_CPU_MIPS32_R1 - select SYS_HAS_CPU_MIPS32_R2 - select SYS_HAS_CPU_MIPS64_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_SMARTMIPS - help - This enables support for the MIPS Technologies SEAD evaluation - board. - config MIPS_SIM bool 'MIPS simulator (MIPSsim)' select CEVT_R4K @@ -437,6 +385,8 @@ config SGI_IP28 select SGI_HAS_DS1286 select SGI_HAS_I8042 select SGI_HAS_INDYDOG + select SGI_HAS_HAL2 + select SGI_HAS_HAL2 select SGI_HAS_SEEQ select SGI_HAS_WD93 select SGI_HAS_ZILOG @@ -602,65 +552,11 @@ config SNI_RM Technology and now in turn merged with Fujitsu. Say Y here to support this machine type. -config TOSHIBA_JMR3927 - bool "Toshiba JMR-TX3927 board" - select CEVT_TXX9 - select DMA_NONCOHERENT - select HW_HAS_PCI - select MIPS_TX3927 - select IRQ_TXX9 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX39XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_HARDIRQS_NO__DO_IRQ - select GPIO_TXX9 +config MACH_TX39XX + bool "Toshiba TX39 series based machines" -config TOSHIBA_RBTX4927 - bool "Toshiba RBTX49[23]7 board" - select CEVT_R4K - select CSRC_R4K - select CEVT_TXX9 - select DMA_NONCOHERENT - select HAS_TXX9_SERIAL - select HW_HAS_PCI - select IRQ_CPU - select IRQ_TXX9 - select I8259 if TOSHIBA_FPCIB0 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ - help - This Toshiba board is based on the TX4927 processor. Say Y here to - support this machine type - -config TOSHIBA_RBTX4938 - bool "Toshiba RBTX4938 board" - select CEVT_R4K - select CSRC_R4K - select CEVT_TXX9 - select DMA_NONCOHERENT - select HAS_TXX9_SERIAL - select HW_HAS_PCI - select IRQ_CPU - select IRQ_TXX9 - select SWAP_IO_SPACE - select SYS_HAS_CPU_TX49XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_BIG_ENDIAN - select SYS_SUPPORTS_KGDB - select GENERIC_HARDIRQS_NO__DO_IRQ - select GPIO_TXX9 - help - This Toshiba board is based on the TX4938 processor. Say Y here to - support this machine type +config MACH_TX49XX + bool "Toshiba TX49 series based machines" config WR_PPMC bool "Wind River PPMC board" @@ -694,8 +590,7 @@ source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" source "arch/mips/sgi-ip27/Kconfig" source "arch/mips/sibyte/Kconfig" -source "arch/mips/tx4927/Kconfig" -source "arch/mips/tx4938/Kconfig" +source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" endmenu @@ -939,10 +834,6 @@ config PCI_GT64XXX_PCI0 config NO_EXCEPT_FILL bool -config MIPS_TX3927 - bool - select HAS_TXX9_SERIAL - config MIPS_RM9122 bool select SERIAL_RM9000 @@ -979,6 +870,9 @@ config SGI_HAS_DS1286 config SGI_HAS_INDYDOG bool +config SGI_HAS_HAL2 + bool + config SGI_HAS_SEEQ bool @@ -1763,6 +1657,7 @@ config SMP bool "Multi-Processing support" depends on SYS_SUPPORTS_SMP select IRQ_PER_CPU + select USE_GENERIC_SMP_HELPERS help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -2064,10 +1959,6 @@ source "fs/Kconfig.binfmt" config TRAD_SIGNALS bool -config BINFMT_IRIX - bool "Include IRIX binary compatibility" - depends on CPU_BIG_ENDIAN && 32BIT && BROKEN - config MIPS32_COMPAT bool "Kernel support for Linux/MIPS 32-bit binary compatibility" depends on 64BIT |