diff options
Diffstat (limited to 'arch/microblaze/pci/pci-common.c')
| -rw-r--r-- | arch/microblaze/pci/pci-common.c | 145 |
1 files changed, 0 insertions, 145 deletions
diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 180f4755ca66..ae79e8638d50 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -678,144 +678,6 @@ static void pcibios_fixup_resources(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); -/* This function tries to figure out if a bridge resource has been initialized - * by the firmware or not. It doesn't have to be absolutely bullet proof, but - * things go more smoothly when it gets it right. It should covers cases such - * as Apple "closed" bridge resources and bare-metal pSeries unassigned bridges - */ -static int pcibios_uninitialized_bridge_resource(struct pci_bus *bus, - struct resource *res) -{ - struct pci_controller *hose = pci_bus_to_host(bus); - struct pci_dev *dev = bus->self; - resource_size_t offset; - u16 command; - int i; - - /* Job is a bit different between memory and IO */ - if (res->flags & IORESOURCE_MEM) { - /* If the BAR is non-0 (res != pci_mem_offset) then it's - * probably been initialized by somebody - */ - if (res->start != hose->pci_mem_offset) - return 0; - - /* The BAR is 0, let's check if memory decoding is enabled on - * the bridge. If not, we consider it unassigned - */ - pci_read_config_word(dev, PCI_COMMAND, &command); - if ((command & PCI_COMMAND_MEMORY) == 0) - return 1; - - /* Memory decoding is enabled and the BAR is 0. If any of - * the bridge resources covers that starting address (0 then - * it's good enough for us for memory - */ - for (i = 0; i < 3; i++) { - if ((hose->mem_resources[i].flags & IORESOURCE_MEM) && - hose->mem_resources[i].start == hose->pci_mem_offset) - return 0; - } - - /* Well, it starts at 0 and we know it will collide so we may as - * well consider it as unassigned. That covers the Apple case. - */ - return 1; - } else { - /* If the BAR is non-0, then we consider it assigned */ - offset = (unsigned long)hose->io_base_virt - _IO_BASE; - if (((res->start - offset) & 0xfffffffful) != 0) - return 0; - - /* Here, we are a bit different than memory as typically IO - * space starting at low addresses -is- valid. What we do - * instead if that we consider as unassigned anything that - * doesn't have IO enabled in the PCI command register, - * and that's it. - */ - pci_read_config_word(dev, PCI_COMMAND, &command); - if (command & PCI_COMMAND_IO) - return 0; - - /* It's starting at 0 and IO is disabled in the bridge, consider - * it unassigned - */ - return 1; - } -} - -/* Fixup resources of a PCI<->PCI bridge */ -static void pcibios_fixup_bridge(struct pci_bus *bus) -{ - struct resource *res; - int i; - - struct pci_dev *dev = bus->self; - - pci_bus_for_each_resource(bus, res, i) { - if (!res) - continue; - if (!res->flags) - continue; - if (i >= 3 && bus->self->transparent) - continue; - - pr_debug("PCI:%s Bus rsrc %d %016llx-%016llx [%x] fixup...\n", - pci_name(dev), i, - (unsigned long long)res->start, - (unsigned long long)res->end, - (unsigned int)res->flags); - - /* Try to detect uninitialized P2P bridge resources, - * and clear them out so they get re-assigned later - */ - if (pcibios_uninitialized_bridge_resource(bus, res)) { - res->flags = 0; - pr_debug("PCI:%s (unassigned)\n", - pci_name(dev)); - } else { - pr_debug("PCI:%s %016llx-%016llx\n", - pci_name(dev), - (unsigned long long)res->start, - (unsigned long long)res->end); - } - } -} - -void pcibios_setup_bus_self(struct pci_bus *bus) -{ - /* Fix up the bus resources for P2P bridges */ - if (bus->self != NULL) - pcibios_fixup_bridge(bus); -} - -void pcibios_setup_bus_devices(struct pci_bus *bus) -{ - struct pci_dev *dev; - - pr_debug("PCI: Fixup bus devices %d (%s)\n", - bus->number, bus->self ? pci_name(bus->self) : "PHB"); - - list_for_each_entry(dev, &bus->devices, bus_list) { - /* Setup OF node pointer in archdata */ - dev->dev.of_node = pci_device_to_OF_node(dev); - - /* Fixup NUMA node as it may not be setup yet by the generic - * code and is needed by the DMA init - */ - set_dev_node(&dev->dev, pcibus_to_node(dev->bus)); - - /* Read default IRQs and fixup if necessary */ - dev->irq = of_irq_parse_and_map_pci(dev, 0, 0); - } -} - -void pcibios_fixup_bus(struct pci_bus *bus) -{ - /* nothing to do */ -} -EXPORT_SYMBOL(pcibios_fixup_bus); - /* * We need to avoid collisions with `mirrored' VGA ports * and other strange ISA hardware, so we always want the @@ -829,13 +691,6 @@ EXPORT_SYMBOL(pcibios_fixup_bus); * but we want to try to avoid allocating at 0x2900-0x2bff * which might have be mirrored at 0x0100-0x03ff.. */ -resource_size_t pcibios_align_resource(void *data, const struct resource *res, - resource_size_t size, resource_size_t align) -{ - return res->start; -} -EXPORT_SYMBOL(pcibios_align_resource); - int pcibios_add_device(struct pci_dev *dev) { dev->irq = of_irq_parse_and_map_pci(dev, 0, 0); |