diff options
Diffstat (limited to 'arch/m68k')
39 files changed, 2621 insertions, 3228 deletions
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 9e8ee9d2b8ca..6c28582fb98f 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -21,6 +21,15 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 bool +config GENERIC_CLOCKEVENTS + bool + +config GENERIC_CMOS_UPDATE + def_bool !MMU + +config GENERIC_GPIO + bool + config GENERIC_HWEIGHT bool default y @@ -29,10 +38,16 @@ config GENERIC_CALIBRATE_DELAY bool default y +config GENERIC_IOMAP + def_bool MMU + config TIME_LOW_RES bool default y +config ARCH_USES_GETTIMEOFFSET + def_bool MMU + config NO_IOPORT def_bool y @@ -62,13 +77,31 @@ config MMU Select if you want MMU-based virtualised addressing space support by paged memory management. If unsure, say 'Y'. -menu "Platform dependent setup" +config MMU_MOTOROLA + bool + +config MMU_SUN3 + bool + depends on MMU && !MMU_MOTOROLA + +menu "Platform setup" + +source arch/m68k/Kconfig.cpu + +source arch/m68k/Kconfig.machine + +source arch/m68k/Kconfig.bus + +endmenu + +menu "Kernel Features" -if MMU -source arch/m68k/Kconfig.mmu +if COLDFIRE +source "kernel/Kconfig.preempt" endif -if !MMU -source arch/m68k/Kconfig.nommu + +if !MMU || COLDFIRE +source "kernel/time/Kconfig" endif source "mm/Kconfig" @@ -85,9 +118,9 @@ if !MMU menu "Power management options" config PM - bool "Power Management support" - help - Support processor power management modes + bool "Power Management support" + help + Support processor power management modes endmenu endif @@ -96,151 +129,7 @@ source "net/Kconfig" source "drivers/Kconfig" -if MMU - -menu "Character devices" - -config ATARI_MFPSER - tristate "Atari MFP serial support" - depends on ATARI - ---help--- - If you like to use the MFP serial ports ("Modem1", "Serial1") under - Linux, say Y. The driver equally supports all kinds of MFP serial - ports and automatically detects whether Serial1 is available. - - To compile this driver as a module, choose M here. - - Note for Falcon users: You also have an MFP port, it's just not - wired to the outside... But you could use the port under Linux. - -config ATARI_MIDI - tristate "Atari MIDI serial support" - depends on ATARI - help - If you want to use your Atari's MIDI port in Linux, say Y. - - To compile this driver as a module, choose M here. - -config ATARI_DSP56K - tristate "Atari DSP56k support (EXPERIMENTAL)" - depends on ATARI && EXPERIMENTAL - help - If you want to be able to use the DSP56001 in Falcons, say Y. This - driver is still experimental, and if you don't know what it is, or - if you don't have this processor, just say N. - - To compile this driver as a module, choose M here. - -config AMIGA_BUILTIN_SERIAL - tristate "Amiga builtin serial support" - depends on AMIGA - help - If you want to use your Amiga's built-in serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config MULTIFACE_III_TTY - tristate "Multiface Card III serial support" - depends on AMIGA - help - If you want to use a Multiface III card's serial port in Linux, - answer Y. - - To compile this driver as a module, choose M here. - -config GVPIOEXT - tristate "GVP IO-Extender support" - depends on PARPORT=n && ZORRO - help - If you want to use a GVP IO-Extender serial card in Linux, say Y. - Otherwise, say N. - -config GVPIOEXT_LP - tristate "GVP IO-Extender parallel printer support" - depends on GVPIOEXT - help - Say Y to enable driving a printer from the parallel port on your - GVP IO-Extender card, N otherwise. - -config GVPIOEXT_PLIP - tristate "GVP IO-Extender PLIP support" - depends on GVPIOEXT - help - Say Y to enable doing IP over the parallel port on your GVP - IO-Extender card, N otherwise. - -config MAC_HID - bool - depends on INPUT_ADBHID - default y - -config HPDCA - tristate "HP DCA serial support" - depends on DIO && SERIAL_8250 - help - If you want to use the internal "DCA" serial ports on an HP300 - machine, say Y here. - -config HPAPCI - tristate "HP APCI serial support" - depends on HP300 && SERIAL_8250 && EXPERIMENTAL - help - If you want to use the internal "APCI" serial ports on an HP400 - machine, say Y here. - -config MVME147_SCC - bool "SCC support for MVME147 serial ports" - depends on MVME147 && BROKEN - help - This is the driver for the serial ports on the Motorola MVME147 - boards. Everyone using one of these boards should say Y here. - -config MVME162_SCC - bool "SCC support for MVME162 serial ports" - depends on MVME16x && BROKEN - help - This is the driver for the serial ports on the Motorola MVME162 and - 172 boards. Everyone using one of these boards should say Y here. - -config BVME6000_SCC - bool "SCC support for BVME6000 serial ports" - depends on BVME6000 && BROKEN - help - This is the driver for the serial ports on the BVME4000 and BVME6000 - boards from BVM Ltd. Everyone using one of these boards should say - Y here. - -config DN_SERIAL - bool "Support for DN serial port (dummy)" - depends on APOLLO - -config SERIAL_CONSOLE - bool "Support for serial port console" - depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y || SERIAL=y || MVME147_SCC || SERIAL167 || MVME162_SCC || BVME6000_SCC || DN_SERIAL) - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). This could be useful if some terminal or printer is connected - to that serial port. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (lilo or loadlin) about how to pass options to the - kernel at boot time.) - - If you don't have a VGA card installed and you say Y here, the - kernel will automatically use the first serial line, /dev/ttyS0, as - system console. - - If unsure, say N. - -endmenu - -endif +source "arch/m68k/Kconfig.devices" source "fs/Kconfig" diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus new file mode 100644 index 000000000000..8294f0c1785e --- /dev/null +++ b/arch/m68k/Kconfig.bus @@ -0,0 +1,55 @@ +if MMU + +comment "Bus Support" + +config NUBUS + bool + depends on MAC + default y + +config ZORRO + bool "Amiga Zorro (AutoConfig) bus support" + depends on AMIGA + help + This enables support for the Zorro bus in the Amiga. If you have + expansion cards in your Amiga that conform to the Amiga + AutoConfig(tm) specification, say Y, otherwise N. Note that even + expansion cards that do not fit in the Zorro slots but fit in e.g. + the CPU slot may fall in this category, so you have to say Y to let + Linux use these. + +config AMIGA_PCMCIA + bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)" + depends on AMIGA && EXPERIMENTAL + help + Include support in the kernel for pcmcia on Amiga 1200 and Amiga + 600. If you intend to use pcmcia cards say Y; otherwise say N. + +config ISA + bool + depends on Q40 || AMIGA_PCMCIA + default y + help + Find out whether you have ISA slots on your motherboard. ISA is the + name of a bus system, i.e. the way the CPU talks to the other stuff + inside your box. Other bus systems are PCI, EISA, MicroChannel + (MCA) or VESA. ISA is an older system, now being displaced by PCI; + newer boards don't support it. If you have ISA, say Y, otherwise N. + +config GENERIC_ISA_DMA + def_bool ISA + +source "drivers/pci/Kconfig" + +source "drivers/zorro/Kconfig" + +endif + +if !MMU + +config ISA_DMA_API + def_bool !M5272 + +source "drivers/pcmcia/Kconfig" + +endif diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu new file mode 100644 index 000000000000..e632b2d12106 --- /dev/null +++ b/arch/m68k/Kconfig.cpu @@ -0,0 +1,429 @@ +comment "Processor Type" + +config M68000 + bool + select CPU_HAS_NO_BITFIELDS + help + The Freescale (was Motorola) 68000 CPU is the first generation of + the well known M68K family of processors. The CPU core as well as + being available as a stand alone CPU was also used in many + System-On-Chip devices (eg 68328, 68302, etc). It does not contain + a paging MMU. + +config MCPU32 + bool + select CPU_HAS_NO_BITFIELDS + help + The Freescale (was then Motorola) CPU32 is a CPU core that is + based on the 68020 processor. For the most part it is used in + System-On-Chip parts, and does not contain a paging MMU. + +config COLDFIRE + bool + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select CPU_HAS_NO_BITFIELDS + help + The Freescale ColdFire family of processors is a modern derivitive + of the 68000 processor family. They are mainly targeted at embedded + applications, and are all System-On-Chip (SOC) devices, as opposed + to stand alone CPUs. They implement a subset of the original 68000 + processor instruction set. + +config M68020 + bool "68020 support" + depends on MMU + help + If you anticipate running this kernel on a computer with a MC68020 + processor, say Y. Otherwise, say N. Note that the 68020 requires a + 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the + Sun 3, which provides its own version. + +config M68030 + bool "68030 support" + depends on MMU && !MMU_SUN3 + help + If you anticipate running this kernel on a computer with a MC68030 + processor, say Y. Otherwise, say N. Note that a MC68EC030 will not + work, as it does not include an MMU (Memory Management Unit). + +config M68040 + bool "68040 support" + depends on MMU && !MMU_SUN3 + help + If you anticipate running this kernel on a computer with a MC68LC040 + or MC68040 processor, say Y. Otherwise, say N. Note that an + MC68EC040 will not work, as it does not include an MMU (Memory + Management Unit). + +config M68060 + bool "68060 support" + depends on MMU && !MMU_SUN3 + help + If you anticipate running this kernel on a computer with a MC68060 + processor, say Y. Otherwise, say N. + +config M68328 + bool "MC68328" + depends on !MMU + select M68000 + help + Motorola 68328 processor support. + +config M68EZ328 + bool "MC68EZ328" + depends on !MMU + select M68000 + help + Motorola 68EX328 processor support. + +config M68VZ328 + bool "MC68VZ328" + depends on !MMU + select M68000 + help + Motorola 68VZ328 processor support. + +config M68360 + bool "MC68360" + depends on !MMU + select MCPU32 + help + Motorola 68360 processor support. + +config M5206 + bool "MCF5206" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_MBAR + help + Motorola ColdFire 5206 processor support. + +config M5206e + bool "MCF5206e" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_MBAR + help + Motorola ColdFire 5206e processor support. + +config M520x + bool "MCF520x" + depends on !MMU + select COLDFIRE + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_SPLIT + help + Freescale Coldfire 5207/5208 processor support. + +config M523x + bool "MCF523x" + depends on !MMU + select COLDFIRE + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + help + Freescale Coldfire 5230/1/2/4/5 processor support + +config M5249 + bool "MCF5249" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_MBAR + help + Motorola ColdFire 5249 processor support. + +config M527x + bool + +config M5271 + bool "MCF5271" + depends on !MMU + select COLDFIRE + select M527x + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + select GENERIC_CLOCKEVENTS + help + Freescale (Motorola) ColdFire 5270/5271 processor support. + +config M5272 + bool "MCF5272" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_MBAR + help + Motorola ColdFire 5272 processor support. + +config M5275 + bool "MCF5275" + depends on !MMU + select COLDFIRE + select M527x + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + select GENERIC_CLOCKEVENTS + help + Freescale (Motorola) ColdFire 5274/5275 processor support. + +config M528x + bool "MCF528x" + depends on !MMU + select COLDFIRE + select GENERIC_CLOCKEVENTS + select HAVE_CACHE_SPLIT + select HAVE_IPSBAR + help + Motorola ColdFire 5280/5282 processor support. + +config M5307 + bool "MCF5307" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_CACHE_CB + select HAVE_MBAR + help + Motorola ColdFire 5307 processor support. + +config M532x + bool "MCF532x" + depends on !MMU + select COLDFIRE + select HAVE_CACHE_CB + help + Freescale (Motorola) ColdFire 532x processor support. + +config M5407 + bool "MCF5407" + depends on !MMU + select COLDFIRE + select COLDFIRE_SW_A7 + select HAVE_CACHE_CB + select HAVE_MBAR + help + Motorola ColdFire 5407 processor support. + +config M54xx + bool + +config M547x + bool "MCF547x" + depends on !MMU + select COLDFIRE + select M54xx + select HAVE_CACHE_CB + select HAVE_MBAR + help + Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. + +config M548x + bool "MCF548x" + depends on !MMU + select COLDFIRE + select M54xx + select HAVE_CACHE_CB + select HAVE_MBAR + help + Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. + + +comment "Processor Specific Options" + +config M68KFPU_EMU + bool "Math emulation support (EXPERIMENTAL)" + depends on MMU + depends on EXPERIMENTAL + help + At some point in the future, this will cause floating-point math + instructions to be emulated by the kernel on machines that lack a + floating-point math coprocessor. Thrill-seekers and chronically + sleep-deprived psychotic hacker types can say Y now, everyone else + should probably wait a while. + +config M68KFPU_EMU_EXTRAPREC + bool "Math emulation extra precision" + depends on M68KFPU_EMU + help + The fpu uses normally a few bit more during calculations for + correct rounding, the emulator can (often) do the same but this + extra calculation can cost quite some time, so you can disable + it here. The emulator will then "only" calculate with a 64 bit + mantissa and round slightly incorrect, what is more than enough + for normal usage. + +config M68KFPU_EMU_ONLY + bool "Math emulation only kernel" + depends on M68KFPU_EMU + help + This option prevents any floating-point instructions from being + compiled into the kernel, thereby the kernel doesn't save any + floating point context anymore during task switches, so this + kernel will only be usable on machines without a floating-point + math coprocessor. This makes the kernel a bit faster as no tests + needs to be executed whether a floating-point instruction in the + kernel should be executed or not. + +config ADVANCED + bool "Advanced configuration options" + depends on MMU + ---help--- + This gives you access to some advanced options for the CPU. The + defaults should be fine for most users, but these options may make + it possible for you to improve performance somewhat if you know what + you are doing. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about these options. + + Most users should say N to this question. + +config RMW_INSNS + bool "Use read-modify-write instructions" + depends on ADVANCED + ---help--- + This allows to use certain instructions that work with indivisible + read-modify-write bus cycles. While this is faster than the + workaround of disabling interrupts, it can conflict with DMA + ( = direct memory access) on many Amiga systems, and it is also said + to destabilize other machines. It is very likely that this will + cause serious problems on any Amiga or Atari Medusa if set. The only + configuration where it should work are 68030-based Ataris, where it + apparently improves performance. But you've been warned! Unless you + really know what you are doing, say N. Try Y only if you're quite + adventurous. + +config SINGLE_MEMORY_CHUNK + bool "Use one physical chunk of memory only" if ADVANCED && !SUN3 + depends on MMU + default y if SUN3 + select NEED_MULTIPLE_NODES + help + Ignore all but the first contiguous chunk of physical memory for VM + purposes. This will save a few bytes kernel size and may speed up + some operations. Say N if not sure. + +config ARCH_DISCONTIGMEM_ENABLE + def_bool MMU && !SINGLE_MEMORY_CHUNK + +config 060_WRITETHROUGH + bool "Use write-through caching for 68060 supervisor accesses" + depends on ADVANCED && M68060 + ---help--- + The 68060 generally uses copyback caching of recently accessed data. + Copyback caching means that memory writes will be held in an on-chip + cache and only written back to memory some time later. Saying Y + here will force supervisor (kernel) accesses to use writethrough + caching. Writethrough caching means that data is written to memory + straight away, so that cache and memory data always agree. + Writethrough caching is less efficient, but is needed for some + drivers on 68060 based systems where the 68060 bus snooping signal + is hardwired on. The 53c710 SCSI driver is known to suffer from + this problem. + +config M68K_L2_CACHE + bool + depends on MAC + default y + +config NODES_SHIFT + int + default "3" + depends on !SINGLE_MEMORY_CHUNK + +config FPU + bool + +config COLDFIRE_SW_A7 + bool + +config HAVE_CACHE_SPLIT + bool + +config HAVE_CACHE_CB + bool + +config HAVE_MBAR + bool + +config HAVE_IPSBAR + bool + +config CLOCK_SET + bool "Enable setting the CPU clock frequency" + depends on COLDFIRE + default n + help + On some CPU's you do not need to know what the core CPU clock + frequency is. On these you can disable clock setting. On some + traditional 68K parts, and on all ColdFire parts you need to set + the appropriate CPU clock frequency. On these devices many of the + onboard peripherals derive their timing from the master CPU clock + frequency. + +config CLOCK_FREQ + int "Set the core clock frequency" + default "66666666" + depends on CLOCK_SET + help + Define the CPU clock frequency in use. This is the core clock + frequency, it may or may not be the same as the external clock + crystal fitted to your board. Some processors have an internal + PLL and can have their frequency programmed at run time, others + use internal dividers. In general the kernel won't setup a PLL + if it is fitted (there are some exceptions). This value will be + specific to the exact CPU that you are using. + +config OLDMASK + bool "Old mask 5307 (1H55J) silicon" + depends on M5307 + help + Build support for the older revision ColdFire 5307 silicon. + Specifically this is the 1H55J mask revision. + +if HAVE_CACHE_SPLIT +choice + prompt "Split Cache Configuration" + default CACHE_I + +config CACHE_I + bool "Instruction" + help + Use all of the ColdFire CPU cache memory as an instruction cache. + +config CACHE_D + bool "Data" + help + Use all of the ColdFire CPU cache memory as a data cache. + +config CACHE_BOTH + bool "Both" + help + Split the ColdFire CPU cache, and use half as an instruction cache + and half as a data cache. +endchoice +endif + +if HAVE_CACHE_CB +choice + prompt "Data cache mode" + default CACHE_WRITETHRU + +config CACHE_WRITETHRU + bool "Write-through" + help + The ColdFire CPU cache is set into Write-through mode. + +config CACHE_COPYBACK + bool "Copy-back" + help + The ColdFire CPU cache is set into Copy-back mode. +endchoice +endif + diff --git a/arch/m68k/Kconfig.devices b/arch/m68k/Kconfig.devices new file mode 100644 index 000000000000..d214034be6a6 --- /dev/null +++ b/arch/m68k/Kconfig.devices @@ -0,0 +1,123 @@ +if MMU + +config ARCH_MAY_HAVE_PC_FDC + bool + depends on BROKEN && (Q40 || SUN3X) + default y + +menu "Platform devices" + +config HEARTBEAT + bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40 + default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300 + help + Use the power-on LED on your machine as a load meter. The exact + behavior is platform-dependent, but normally the flash frequency is + a hyperbolic function of the 5-minute load average. + +# We have a dedicated heartbeat LED. :-) +config PROC_HARDWARE + bool "/proc/hardware support" + help + Say Y here to support the /proc/hardware file, which gives you + access to information about the machine you're running on, + including the model, CPU, MMU, clock speed, BogoMIPS rating, + and memory size. + +endmenu + +menu "Character devices" + +config ATARI_MFPSER + tristate "Atari MFP serial support" + depends on ATARI + ---help--- + If you like to use the MFP serial ports ("Modem1", "Serial1") under + Linux, say Y. The driver equally supports all kinds of MFP serial + ports and automatically detects whether Serial1 is available. + + To compile this driver as a module, choose M here. + + Note for Falcon users: You also have an MFP port, it's just not + wired to the outside... But you could use the port under Linux. + +config ATARI_MIDI + tristate "Atari MIDI serial support" + depends on ATARI + help + If you want to use your Atari's MIDI port in Linux, say Y. + + To compile this driver as a module, choose M here. + +config ATARI_DSP56K + tristate "Atari DSP56k support (EXPERIMENTAL)" + depends on ATARI && EXPERIMENTAL + help + If you want to be able to use the DSP56001 in Falcons, say Y. This + driver is still experimental, and if you don't know what it is, or + if you don't have this processor, just say N. + + To compile this driver as a module, choose M here. + +config AMIGA_BUILTIN_SERIAL + tristate "Amiga builtin serial support" + depends on AMIGA + help + If you want to use your Amiga's built-in serial port in Linux, + answer Y. + + To compile this driver as a module, choose M here. + +config MULTIFACE_III_TTY + tristate "Multiface Card III serial support" + depends on AMIGA + help + If you want to use a Multiface III card's serial port in Linux, + answer Y. + + To compile this driver as a module, choose M here. + +config HPDCA + tristate "HP DCA serial support" + depends on DIO && SERIAL_8250 + help + If you want to use the internal "DCA" serial ports on an HP300 + machine, say Y here. + +config HPAPCI + tristate "HP APCI serial support" + depends on HP300 && SERIAL_8250 && EXPERIMENTAL + help + If you want to use the internal "APCI" serial ports on an HP400 + machine, say Y here. + +config DN_SERIAL + bool "Support for DN serial port (dummy)" + depends on APOLLO + +config SERIAL_CONSOLE + bool "Support for serial port console" + depends on (AMIGA || ATARI || SUN3 || SUN3X || VME || APOLLO) && (ATARI_MFPSER=y || ATARI_MIDI=y || AMIGA_BUILTIN_SERIAL=y || MULTIFACE_III_TTY=y || SERIAL=y || SERIAL167 || DN_SERIAL) + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (lilo or loadlin) about how to pass options to the + kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + If unsure, say N. + +endmenu + +endif diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.machine index ff46383112a4..ef4a26aff780 100644 --- a/arch/m68k/Kconfig.nommu +++ b/arch/m68k/Kconfig.machine @@ -1,297 +1,142 @@ -config FPU - bool - default n - -config GENERIC_GPIO - bool - default n - -config GENERIC_CMOS_UPDATE - bool - default y - -config GENERIC_CLOCKEVENTS - bool - default n - -config M68000 - bool - select CPU_HAS_NO_BITFIELDS - help - The Freescale (was Motorola) 68000 CPU is the first generation of - the well known M68K family of processors. The CPU core as well as - being available as a stand alone CPU was also used in many - System-On-Chip devices (eg 68328, 68302, etc). It does not contain - a paging MMU. - -config MCPU32 - bool - select CPU_HAS_NO_BITFIELDS - help - The Freescale (was then Motorola) CPU32 is a CPU core that is - based on the 68020 processor. For the most part it is used in - System-On-Chip parts, and does not contain a paging MMU. - -config COLDFIRE - bool - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - select CPU_HAS_NO_BITFIELDS - help - The Freescale ColdFire family of processors is a modern derivitive - of the 68000 processor family. They are mainly targeted at embedded - applications, and are all System-On-Chip (SOC) devices, as opposed - to stand alone CPUs. They implement a subset of the original 68000 - processor instruction set. - -config COLDFIRE_SW_A7 - bool - default n - -config HAVE_CACHE_SPLIT - bool - -config HAVE_CACHE_CB - bool - -config HAVE_MBAR - bool - -config HAVE_IPSBAR - bool - -choice - prompt "CPU" - default M68EZ328 - -config M68328 - bool "MC68328" - select M68000 - help - Motorola 68328 processor support. - -config M68EZ328 - bool "MC68EZ328" - select M68000 - help - Motorola 68EX328 processor support. - -config M68VZ328 - bool "MC68VZ328" - select M68000 - help - Motorola 68VZ328 processor support. - -config M68360 - bool "MC68360" - select MCPU32 - help - Motorola 68360 processor support. - -config M5206 - bool "MCF5206" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5206 processor support. +comment "Machine Types" + +config AMIGA + bool "Amiga support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the Amiga series of computers. If + you plan to use this kernel on an Amiga, say Y here and browse the + material available in <file:Documentation/m68k>; otherwise say N. + +config ATARI + bool "Atari support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the 68000-based Atari series of + computers (including the TT, Falcon and Medusa). If you plan to use + this kernel on an Atari, say Y here and browse the material + available in <file:Documentation/m68k>; otherwise say N. + +config MAC + bool "Macintosh support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the Apple Macintosh series of + computers (yes, there is experimental support now, at least for part + of the series). + + Say N unless you're willing to code the remaining necessary support. + ;) + +config APOLLO + bool "Apollo support" + depends on MMU + select MMU_MOTOROLA if MMU + help + Say Y here if you want to run Linux on an MC680x0-based Apollo + Domain workstation such as the DN3500. + +config VME + bool "VME (Motorola and BVM) support" + depends on MMU + select MMU_MOTOROLA if MMU + help + Say Y here if you want to build a kernel for a 680x0 based VME + board. Boards currently supported include Motorola boards MVME147, + MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and + BVME6000 boards from BVM Ltd are also supported. + +config MVME147 + bool "MVME147 support" + depends on MMU + depends on VME + help + Say Y to include support for early Motorola VME boards. This will + build a kernel which can run on MVME147 single-board computers. If + you select this option you will have to select the appropriate + drivers for SCSI, Ethernet and serial ports later on. + +config MVME16x + bool "MVME162, 166 and 167 support" + depends on MMU + depends on VME + help + Say Y to include support for Motorola VME boards. This will build a + kernel which can run on MVME162, MVME166, MVME167, MVME172, and + MVME177 boards. If you select this option you will have to select + the appropriate drivers for SCSI, Ethernet and serial ports later + on. + +config BVME6000 + bool "BVME4000 and BVME6000 support" + depends on MMU + depends on VME + help + Say Y to include support for VME boards from BVM Ltd. This will + build a kernel which can run on BVME4000 and BVME6000 boards. If + you select this option you will have to select the appropriate + drivers for SCSI, Ethernet and serial ports later on. + +config HP300 + bool "HP9000/300 and HP9000/400 support" + depends on MMU + select MMU_MOTOROLA if MMU + help + This option enables support for the HP9000/300 and HP9000/400 series + of workstations. Support for these machines is still somewhat + experimental. If you plan to try to use the kernel on such a machine + say Y here. + Everybody else says N. + +config SUN3X + bool "Sun3x support" + depends on MMU + select MMU_MOTOROLA if MMU + select M68030 + help + This option enables support for the Sun 3x series of workstations. + Be warned that this support is very experimental. + Note that Sun 3x kernels are not compatible with Sun 3 hardware. + General Linux information on the Sun 3x series (now discontinued) + is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. + + If you don't want to compile a kernel for a Sun 3x, say N. + +config Q40 + bool "Q40/Q60 support" + depends on MMU + select MMU_MOTOROLA if MMU + help + The Q40 is a Motorola 68040-based successor to the Sinclair QL + manufactured in Germany. There is an official Q40 home page at + <http://www.q40.de/>. This option enables support for the Q40 and + Q60. Select your CPU below. For 68LC060 don't forget to enable FPU + emulation. + +config SUN3 + bool "Sun3 support" + depends on MMU + depends on !MMU_MOTOROLA + select MMU_SUN3 if MMU + select M68020 + help + This option enables support for the Sun 3 series of workstations + (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires + that all other hardware types must be disabled, as Sun 3 kernels + are incompatible with all other m68k targets (including Sun 3x!). + + If you don't want to compile a kernel exclusively for a Sun 3, say N. -config M5206e - bool "MCF5206e" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5206e processor support. - -config M520x - bool "MCF520x" - select COLDFIRE - select GENERIC_CLOCKEVENTS - select HAVE_CACHE_SPLIT - help - Freescale Coldfire 5207/5208 processor support. - -config M523x - bool "MCF523x" - select COLDFIRE - select GENERIC_CLOCKEVENTS - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Freescale Coldfire 5230/1/2/4/5 processor support - -config M5249 - bool "MCF5249" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5249 processor support. - -config M5271 - bool "MCF5271" - select COLDFIRE - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Freescale (Motorola) ColdFire 5270/5271 processor support. - -config M5272 - bool "MCF5272" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_MBAR - help - Motorola ColdFire 5272 processor support. - -config M5275 - bool "MCF5275" - select COLDFIRE - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Freescale (Motorola) ColdFire 5274/5275 processor support. - -config M528x - bool "MCF528x" - select COLDFIRE - select GENERIC_CLOCKEVENTS - select HAVE_CACHE_SPLIT - select HAVE_IPSBAR - help - Motorola ColdFire 5280/5282 processor support. - -config M5307 - bool "MCF5307" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_CACHE_CB - select HAVE_MBAR - help - Motorola ColdFire 5307 processor support. - -config M532x - bool "MCF532x" - select COLDFIRE - select HAVE_CACHE_CB - help - Freescale (Motorola) ColdFire 532x processor support. - -config M5407 - bool "MCF5407" - select COLDFIRE - select COLDFIRE_SW_A7 - select HAVE_CACHE_CB - select HAVE_MBAR - help - Motorola ColdFire 5407 processor support. - -config M547x - bool "MCF547x" - select COLDFIRE - select HAVE_CACHE_CB - select HAVE_MBAR - help - Freescale ColdFire 5470/5471/5472/5473/5474/5475 processor support. - -config M548x - bool "MCF548x" - select COLDFIRE - select HAVE_CACHE_CB - select HAVE_MBAR - help - Freescale ColdFire 5480/5481/5482/5483/5484/5485 processor support. - -endchoice - -config M527x - bool - depends on (M5271 || M5275) - select GENERIC_CLOCKEVENTS - default y - -config M54xx +config PILOT bool - depends on (M548x || M547x) - default y - -config CLOCK_SET - bool "Enable setting the CPU clock frequency" - default n - help - On some CPU's you do not need to know what the core CPU clock - frequency is. On these you can disable clock setting. On some - traditional 68K parts, and on all ColdFire parts you need to set - the appropriate CPU clock frequency. On these devices many of the - onboard peripherals derive their timing from the master CPU clock - frequency. - -config CLOCK_FREQ - int "Set the core clock frequency" - default "66666666" - depends on CLOCK_SET - help - Define the CPU clock frequency in use. This is the core clock - frequency, it may or may not be the same as the external clock - crystal fitted to your board. Some processors have an internal - PLL and can have their frequency programmed at run time, others - use internal dividers. In general the kernel won't setup a PLL - if it is fitted (there are some exceptions). This value will be - specific to the exact CPU that you are using. - -config OLDMASK - bool "Old mask 5307 (1H55J) silicon" - depends on M5307 - help - Build support for the older revision ColdFire 5307 silicon. - Specifically this is the 1H55J mask revision. - -if HAVE_CACHE_SPLIT -choice - prompt "Split Cache Configuration" - default CACHE_I - -config CACHE_I - bool "Instruction" - help - Use all of the ColdFire CPU cache memory as an instruction cache. - -config CACHE_D - bool "Data" - help - Use all of the ColdFire CPU cache memory as a data cache. - -config CACHE_BOTH - bool "Both" - help - Split the ColdFire CPU cache, and use half as an instruction cache - and half as a data cache. -endchoice -endif - -if HAVE_CACHE_CB -choice - prompt "Data cache mode" - default CACHE_WRITETHRU - -config CACHE_WRITETHRU - bool "Write-through" - help - The ColdFire CPU cache is set into Write-through mode. - -config CACHE_COPYBACK - bool "Copy-back" - help - The ColdFire CPU cache is set into Copy-back mode. -endchoice -endif - -comment "Platform" config PILOT3 bool "Pilot 1000/5000, PalmPilot Personal/Pro, or PalmIII support" depends on M68328 + select PILOT help Support for the Palm Pilot 1000/5000, Personal/Pro and PalmIII. @@ -302,7 +147,7 @@ config XCOPILOT_BUGS Support the bugs of Xcopilot. config UC5272 - bool 'Arcturus Networks uC5272 dimm board support' + bool "Arcturus Networks uC5272 dimm board support" depends on M5272 help Support for the Arcturus Networks uC5272 dimm board. @@ -356,15 +201,23 @@ config UCQUICC help Support for the Lineo uCquicc board. +config ARNEWSH + bool + config ARN5206 bool "Arnewsh 5206 board support" depends on M5206 + select ARNEWSH help Support for the Arnewsh 5206 board. +config FREESCALE + bool + config M5206eC3 bool "Motorola M5206eC3 board support" depends on M5206e + select FREESCALE help Support for the Motorola M5206eC3 board. @@ -377,75 +230,92 @@ config ELITE config M5208EVB bool "Freescale M5208EVB board support" depends on M520x + select FREESCALE help Support for the Freescale Coldfire M5208EVB. config M5235EVB bool "Freescale M5235EVB support" depends on M523x + select FREESCALE help Support for the Freescale M5235EVB board. config M5249C3 bool "Motorola M5249C3 board support" depends on M5249 + select FREESCALE help Support for the Motorola M5249C3 board. config M5271EVB bool "Freescale (Motorola) M5271EVB board support" depends on M5271 + select FREESCALE help Support for the Freescale (Motorola) M5271EVB board. config M5275EVB bool "Freescale (Motorola) M5275EVB board support" depends on M5275 + select FREESCALE help Support for the Freescale (Motorola) M5275EVB board. config M5272C3 bool "Motorola M5272C3 board support" depends on M5272 + select FREESCALE help Support for the Motorola M5272C3 board. +config senTec + bool + config COBRA5272 bool "senTec COBRA5272 board support" depends on M5272 + select senTec help Support for the senTec COBRA5272 board. +config AVNET + bool + config AVNET5282 bool "Avnet 5282 board support" depends on M528x + select AVNET help - Support for the Avnet 5282 board. - + Support for the Avnet 5282 board. + config M5282EVB bool "Motorola M5282EVB board support" depends on M528x + select FREESCALE help Support for the Motorola M5282EVB board. config COBRA5282 bool "senTec COBRA5282 board support" depends on M528x + select senTec help Support for the senTec COBRA5282 board. - + config SOM5282EM bool "EMAC.Inc SOM5282EM board support" depends on M528x + select EMAC_INC help - Support for the EMAC.Inc SOM5282EM module. - + Support for the EMAC.Inc SOM5282EM module. + config WILDFIRE bool "Intec Automation Inc. WildFire board support" depends on M528x help Support for the Intec Automation Inc. WildFire. - + config WILDFIREMOD bool "Intec Automation Inc. WildFire module support" depends on M528x @@ -455,12 +325,14 @@ config WILDFIREMOD config ARN5307 bool "Arnewsh 5307 board support" depends on M5307 + select ARNEWSH help Support for the Arnewsh 5307 board. config M5307C3 bool "Motorola M5307C3 board support" depends on M5307 + select FREESCALE help Support for the Motorola M5307C3 board. @@ -473,6 +345,7 @@ config SECUREEDGEMP3 config M5329EVB bool "Freescale (Motorola) M5329EVB board support" depends on M532x + select FREESCALE help Support for the Freescale (Motorola) M5329EVB board. @@ -485,6 +358,7 @@ config COBRA5329 config M5407C3 bool "Motorola M5407C3 board support" depends on M5407 + select FREESCALE help Support for the Motorola M5407C3 board. @@ -524,9 +398,13 @@ config SNAPGEAR help Special additional support for SnapGear router boards. +config SNEHA + bool + config CPU16B bool "Sneha Technologies S.L. Sarasvati board support" depends on M5272 + select SNEHA help Support for the SNEHA CPU16B board. @@ -536,63 +414,20 @@ config MOD5272 help Support for the Netburner MOD-5272 board. +config SAVANT + bool + config SAVANTrosie1 bool "Savant Rosie1 board support" depends on M523x + select SAVANT help Support for the Savant Rosie1 board. -config ROMFS_FROM_ROM - bool "ROMFS image not RAM resident" - depends on (NETtel || SNAPGEAR) - help - The ROMfs filesystem will stay resident in the FLASH/ROM, not be - moved into RAM. - -config PILOT - bool - default y - depends on (PILOT3 || PILOT5) - -config ARNEWSH - bool - default y - depends on (ARN5206 || ARN5307) - -config FREESCALE - bool - default y - depends on (M5206eC3 || M5208EVB || M5235EVB || M5249C3 || M5271EVB || M5272C3 || M5275EVB || M5282EVB || M5307C3 || M5329EVB || M5407C3) - -config HW_FEITH - bool - default y - depends on (CLEOPATRA || CANCam || SCALES) - -config senTec - bool - default y - depends on (COBRA5272 || COBRA5282) - -config EMAC_INC - bool - default y - depends on (SOM5282EM) -config SNEHA - bool - default y - depends on CPU16B +if !MMU || COLDFIRE -config SAVANT - bool - default y - depends on SAVANTrosie1 - -config AVNET - bool - default y - depends on (AVNET5282) +comment "Machine Options" config UBOOT bool "Support for U-Boot command line parameters" @@ -673,33 +508,6 @@ config KERNELBASE a system with the RAM based at address 0, and leaving enough room for the theoretical maximum number of 256 vectors. -choice - prompt "RAM bus width" - default RAMAUTOBIT - -config RAMAUTOBIT - bool "AUTO" - help - Select the physical RAM data bus size. Not needed on most platforms, - so you can generally choose AUTO. - -config RAM8BIT - bool "8bit" - help - Configure RAM bus to be 8 bits wide. - -config RAM16BIT - bool "16bit" - help - Configure RAM bus to be 16 bits wide. - -config RAM32BIT - bool "32bit" - help - Configure RAM bus to be 32 bits wide. - -endchoice - comment "ROM configuration" config ROM @@ -772,16 +580,4 @@ config ROMKERNEL endchoice -if COLDFIRE -source "kernel/Kconfig.preempt" endif - -source "kernel/time/Kconfig" - -config ISA_DMA_API - bool - depends on !M5272 - default y - -source "drivers/pcmcia/Kconfig" - diff --git a/arch/m68k/Kconfig.mmu b/arch/m68k/Kconfig.mmu deleted file mode 100644 index 13e20bbc4079..000000000000 --- a/arch/m68k/Kconfig.mmu +++ /dev/null @@ -1,411 +0,0 @@ -config GENERIC_IOMAP - bool - default y - -config ARCH_MAY_HAVE_PC_FDC - bool - depends on BROKEN && (Q40 || SUN3X) - default y - -config ARCH_USES_GETTIMEOFFSET - def_bool y - -config EISA - bool - ---help--- - The Extended Industry Standard Architecture (EISA) bus was - developed as an open alternative to the IBM MicroChannel bus. - - The EISA bus provided some of the features of the IBM MicroChannel - bus while maintaining backward compatibility with cards made for - the older ISA bus. The EISA bus saw limited use between 1988 and - 1995 when it was made obsolete by the PCI bus. - - Say Y here if you are building a kernel for an EISA-based machine. - - Otherwise, say N. - -config MCA - bool - help - MicroChannel Architecture is found in some IBM PS/2 machines and - laptops. It is a bus system similar to PCI or ISA. See - <file:Documentation/mca.txt> (and especially the web page given - there) before attempting to build an MCA bus kernel. - -config PCMCIA - tristate - ---help--- - Say Y here if you want to attach PCMCIA- or PC-cards to your Linux - computer. These are credit-card size devices such as network cards, - modems or hard drives often used with laptops computers. There are - actually two varieties of these cards: the older 16 bit PCMCIA cards - and the newer 32 bit CardBus cards. If you want to use CardBus - cards, you need to say Y here and also to "CardBus support" below. - - To use your PC-cards, you will need supporting software from David - Hinds' pcmcia-cs package (see the file <file:Documentation/Changes> - for location). Please also read the PCMCIA-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - To compile this driver as modules, choose M here: the - modules will be called pcmcia_core and ds. - -config AMIGA - bool "Amiga support" - select MMU_MOTOROLA if MMU - help - This option enables support for the Amiga series of computers. If - you plan to use this kernel on an Amiga, say Y here and browse the - material available in <file:Documentation/m68k>; otherwise say N. - -config ATARI - bool "Atari support" - select MMU_MOTOROLA if MMU - help - This option enables support for the 68000-based Atari series of - computers (including the TT, Falcon and Medusa). If you plan to use - this kernel on an Atari, say Y here and browse the material - available in <file:Documentation/m68k>; otherwise say N. - -config MAC - bool "Macintosh support" - select MMU_MOTOROLA if MMU - help - This option enables support for the Apple Macintosh series of - computers (yes, there is experimental support now, at least for part - of the series). - - Say N unless you're willing to code the remaining necessary support. - ;) - -config NUBUS - bool - depends on MAC - default y - -config M68K_L2_CACHE - bool - depends on MAC - default y - -config APOLLO - bool "Apollo support" - select MMU_MOTOROLA if MMU - help - Say Y here if you want to run Linux on an MC680x0-based Apollo - Domain workstation such as the DN3500. - -config VME - bool "VME (Motorola and BVM) support" - select MMU_MOTOROLA if MMU - help - Say Y here if you want to build a kernel for a 680x0 based VME - board. Boards currently supported include Motorola boards MVME147, - MVME162, MVME166, MVME167, MVME172, and MVME177. BVME4000 and - BVME6000 boards from BVM Ltd are also supported. - -config MVME147 - bool "MVME147 support" - depends on VME - help - Say Y to include support for early Motorola VME boards. This will - build a kernel which can run on MVME147 single-board computers. If - you select this option you will have to select the appropriate - drivers for SCSI, Ethernet and serial ports later on. - -config MVME16x - bool "MVME162, 166 and 167 support" - depends on VME - help - Say Y to include support for Motorola VME boards. This will build a - kernel which can run on MVME162, MVME166, MVME167, MVME172, and - MVME177 boards. If you select this option you will have to select - the appropriate drivers for SCSI, Ethernet and serial ports later - on. - -config BVME6000 - bool "BVME4000 and BVME6000 support" - depends on VME - help - Say Y to include support for VME boards from BVM Ltd. This will - build a kernel which can run on BVME4000 and BVME6000 boards. If - you select this option you will have to select the appropriate - drivers for SCSI, Ethernet and serial ports later on. - -config HP300 - bool "HP9000/300 and HP9000/400 support" - select MMU_MOTOROLA if MMU - help - This option enables support for the HP9000/300 and HP9000/400 series - of workstations. Support for these machines is still somewhat - experimental. If you plan to try to use the kernel on such a machine - say Y here. - Everybody else says N. - -config DIO - bool "DIO bus support" - depends on HP300 - default y - help - Say Y here to enable support for the "DIO" expansion bus used in - HP300 machines. If you are using such a system you almost certainly - want this. - -config SUN3X - bool "Sun3x support" - select MMU_MOTOROLA if MMU - select M68030 - help - This option enables support for the Sun 3x series of workstations. - Be warned that this support is very experimental. - Note that Sun 3x kernels are not compatible with Sun 3 hardware. - General Linux information on the Sun 3x series (now discontinued) - is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. - - If you don't want to compile a kernel for a Sun 3x, say N. - -config Q40 - bool "Q40/Q60 support" - select MMU_MOTOROLA if MMU - help - The Q40 is a Motorola 68040-based successor to the Sinclair QL - manufactured in Germany. There is an official Q40 home page at - <http://www.q40.de/>. This option enables support for the Q40 and - Q60. Select your CPU below. For 68LC060 don't forget to enable FPU - emulation. - -config SUN3 - bool "Sun3 support" - depends on !MMU_MOTOROLA - select MMU_SUN3 if MMU - select M68020 - help - This option enables support for the Sun 3 series of workstations - (3/50, 3/60, 3/1xx, 3/2xx systems). Enabling this option requires - that all other hardware types must be disabled, as Sun 3 kernels - are incompatible with all other m68k targets (including Sun 3x!). - - If you don't want to compile a kernel exclusively for a Sun 3, say N. - -config NATFEAT - bool "ARAnyM emulator support" - depends on ATARI - help - This option enables support for ARAnyM native features, such as - access to a disk image as /dev/hda. - -config NFBLOCK - tristate "NatFeat block device support" - depends on BLOCK && NATFEAT - help - Say Y to include support for the ARAnyM NatFeat block device - which allows direct access to the hard drives without using - the hardware emulation. - -config NFCON - tristate "NatFeat console driver" - depends on NATFEAT - help - Say Y to include support for the ARAnyM NatFeat console driver - which allows the console output to be redirected to the stderr - output of ARAnyM. - -config NFETH - tristate "NatFeat Ethernet support" - depends on NET_ETHERNET && NATFEAT - help - Say Y to include support for the ARAnyM NatFeat network device - which will emulate a regular ethernet device while presenting an - ethertap device to the host system. - -comment "Processor type" - -config M68020 - bool "68020 support" - help - If you anticipate running this kernel on a computer with a MC68020 - processor, say Y. Otherwise, say N. Note that the 68020 requires a - 68851 MMU (Memory Management Unit) to run Linux/m68k, except on the - Sun 3, which provides its own version. - -config M68030 - bool "68030 support" - depends on !MMU_SUN3 - help - If you anticipate running this kernel on a computer with a MC68030 - processor, say Y. Otherwise, say N. Note that a MC68EC030 will not - work, as it does not include an MMU (Memory Management Unit). - -config M68040 - bool "68040 support" - depends on !MMU_SUN3 - help - If you anticipate running this kernel on a computer with a MC68LC040 - or MC68040 processor, say Y. Otherwise, say N. Note that an - MC68EC040 will not work, as it does not include an MMU (Memory - Management Unit). - -config M68060 - bool "68060 support" - depends on !MMU_SUN3 - help - If you anticipate running this kernel on a computer with a MC68060 - processor, say Y. Otherwise, say N. - -config MMU_MOTOROLA - bool - -config MMU_SUN3 - bool - depends on MMU && !MMU_MOTOROLA - -config M68KFPU_EMU - bool "Math emulation support (EXPERIMENTAL)" - depends on EXPERIMENTAL - help - At some point in the future, this will cause floating-point math - instructions to be emulated by the kernel on machines that lack a - floating-point math coprocessor. Thrill-seekers and chronically - sleep-deprived psychotic hacker types can say Y now, everyone else - should probably wait a while. - -config M68KFPU_EMU_EXTRAPREC - bool "Math emulation extra precision" - depends on M68KFPU_EMU - help - The fpu uses normally a few bit more during calculations for - correct rounding, the emulator can (often) do the same but this - extra calculation can cost quite some time, so you can disable - it here. The emulator will then "only" calculate with a 64 bit - mantissa and round slightly incorrect, what is more than enough - for normal usage. - -config M68KFPU_EMU_ONLY - bool "Math emulation only kernel" - depends on M68KFPU_EMU - help - This option prevents any floating-point instructions from being - compiled into the kernel, thereby the kernel doesn't save any - floating point context anymore during task switches, so this - kernel will only be usable on machines without a floating-point - math coprocessor. This makes the kernel a bit faster as no tests - needs to be executed whether a floating-point instruction in the - kernel should be executed or not. - -config ADVANCED - bool "Advanced configuration options" - ---help--- - This gives you access to some advanced options for the CPU. The - defaults should be fine for most users, but these options may make - it possible for you to improve performance somewhat if you know what - you are doing. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about these options. - - Most users should say N to this question. - -config RMW_INSNS - bool "Use read-modify-write instructions" - depends on ADVANCED - ---help--- - This allows to use certain instructions that work with indivisible - read-modify-write bus cycles. While this is faster than the - workaround of disabling interrupts, it can conflict with DMA - ( = direct memory access) on many Amiga systems, and it is also said - to destabilize other machines. It is very likely that this will - cause serious problems on any Amiga or Atari Medusa if set. The only - configuration where it should work are 68030-based Ataris, where it - apparently improves performance. But you've been warned! Unless you - really know what you are doing, say N. Try Y only if you're quite - adventurous. - -config SINGLE_MEMORY_CHUNK - bool "Use one physical chunk of memory only" if ADVANCED && !SUN3 - default y if SUN3 - select NEED_MULTIPLE_NODES - help - Ignore all but the first contiguous chunk of physical memory for VM - purposes. This will save a few bytes kernel size and may speed up - some operations. Say N if not sure. - -config 060_WRITETHROUGH - bool "Use write-through caching for 68060 supervisor accesses" - depends on ADVANCED && M68060 - ---help--- - The 68060 generally uses copyback caching of recently accessed data. - Copyback caching means that memory writes will be held in an on-chip - cache and only written back to memory some time later. Saying Y - here will force supervisor (kernel) accesses to use writethrough - caching. Writethrough caching means that data is written to memory - straight away, so that cache and memory data always agree. - Writethrough caching is less efficient, but is needed for some - drivers on 68060 based systems where the 68060 bus snooping signal - is hardwired on. The 53c710 SCSI driver is known to suffer from - this problem. - -config ARCH_DISCONTIGMEM_ENABLE - def_bool !SINGLE_MEMORY_CHUNK - -config NODES_SHIFT - int - default "3" - depends on !SINGLE_MEMORY_CHUNK - -config ZORRO - bool "Amiga Zorro (AutoConfig) bus support" - depends on AMIGA - help - This enables support for the Zorro bus in the Amiga. If you have - expansion cards in your Amiga that conform to the Amiga - AutoConfig(tm) specification, say Y, otherwise N. Note that even - expansion cards that do not fit in the Zorro slots but fit in e.g. - the CPU slot may fall in this category, so you have to say Y to let - Linux use these. - -config AMIGA_PCMCIA - bool "Amiga 1200/600 PCMCIA support (EXPERIMENTAL)" - depends on AMIGA && EXPERIMENTAL - help - Include support in the kernel for pcmcia on Amiga 1200 and Amiga - 600. If you intend to use pcmcia cards say Y; otherwise say N. - -config HEARTBEAT - bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || MAC ||Q40 - default y if !AMIGA && !APOLLO && !ATARI && !MAC && !Q40 && HP300 - help - Use the power-on LED on your machine as a load meter. The exact - behavior is platform-dependent, but normally the flash frequency is - a hyperbolic function of the 5-minute load average. - -# We have a dedicated heartbeat LED. :-) -config PROC_HARDWARE - bool "/proc/hardware support" - help - Say Y here to support the /proc/hardware file, which gives you - access to information about the machine you're running on, - including the model, CPU, MMU, clock speed, BogoMIPS rating, - and memory size. - -config ISA - bool - depends on Q40 || AMIGA_PCMCIA - default y - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. Other bus systems are PCI, EISA, MicroChannel - (MCA) or VESA. ISA is an older system, now being displaced by PCI; - newer boards don't support it. If you have ISA, say Y, otherwise N. - -config GENERIC_ISA_DMA - bool - depends on Q40 || AMIGA_PCMCIA - default y - -source "drivers/pci/Kconfig" - -source "drivers/zorro/Kconfig" - diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index be46cadd4017..cf318f20c64d 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -1,7 +1,171 @@ +# +# m68k/Makefile +# +# This file is included by the global makefile so that you can add your own +# architecture-specific flags and dependencies. Remember to do have actions +# for "archclean" and "archdep" for cleaning up and making dependencies for +# this architecture +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# +# Copyright (C) 1994 by Hamish Macdonald +# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com> +# + KBUILD_DEFCONFIG := multi_defconfig +# +# Enable processor type. Ordering of these is important - we want to +# use the minimum processor type of the range we support. The logic +# for 680x0 will only allow use of the -m68060 or -m68040 if no other +# 680x0 type is specified - and no option is specified for 68030 or +# 68020. The other m68k/ColdFire types always specify some type of +# compiler cpu type flag. +# +ifndef CONFIG_M68040 +cpuflags-$(CONFIG_M68060) := -m68060 +endif +ifndef CONFIG_M68060 +cpuflags-$(CONFIG_M68040) := -m68040 +endif +cpuflags-$(CONFIG_M68030) := +cpuflags-$(CONFIG_M68020) := +cpuflags-$(CONFIG_M68360) := -m68332 +cpuflags-$(CONFIG_M68000) := -m68000 +cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200) +cpuflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200) +cpuflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307) +cpuflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200) +cpuflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307) +cpuflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307) +cpuflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307) +cpuflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307) +cpuflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307) +cpuflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200) +cpuflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200) +cpuflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200) +cpuflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200) + +KBUILD_AFLAGS += $(cpuflags-y) +KBUILD_CFLAGS += $(cpuflags-y) -pipe ifdef CONFIG_MMU -include $(srctree)/arch/m68k/Makefile_mm +# without -fno-strength-reduce the 53c7xx.c driver fails ;-( +KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2 +else +# we can use a m68k-linux-gcc toolchain with these in place +KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\" +KBUILD_CFLAGS += -D__uClinux__ +KBUILD_AFLAGS += -D__uClinux__ +endif + +LDFLAGS := -m m68kelf +KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds +ifneq ($(SUBARCH),$(ARCH)) + ifeq ($(CROSS_COMPILE),) + CROSS_COMPILE := $(call cc-cross-prefix, \ + m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-) + endif +endif + +ifdef CONFIG_SUN3 +LDFLAGS_vmlinux = -N +endif + +CHECKFLAGS += -D__mc68000__ + + +ifdef CONFIG_KGDB +# If configured for kgdb support, include debugging infos and keep the +# frame pointer +KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g +endif + +# +# Select the assembler head startup code. Order is important. The default +# head code is first, processor specific selections can override it after. +# +head-y := arch/m68k/kernel/head.o +head-$(CONFIG_SUN3) := arch/m68k/kernel/sun3-head.o +head-$(CONFIG_M68360) := arch/m68k/platform/68360/head.o +head-$(CONFIG_M68000) := arch/m68k/platform/68328/head.o +head-$(CONFIG_COLDFIRE) := arch/m68k/platform/coldfire/head.o + +core-y += arch/m68k/kernel/ arch/m68k/mm/ +libs-y += arch/m68k/lib/ + +core-$(CONFIG_Q40) += arch/m68k/q40/ +core-$(CONFIG_AMIGA) += arch/m68k/amiga/ +core-$(CONFIG_ATARI) += arch/m68k/atari/ +core-$(CONFIG_MAC) += arch/m68k/mac/ +core-$(CONFIG_HP300) += arch/m68k/hp300/ +core-$(CONFIG_APOLLO) += arch/m68k/apollo/ +core-$(CONFIG_MVME147) += arch/m68k/mvme147/ +core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/ +core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/ +core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/ +core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/ +core-$(CONFIG_NATFEAT) += arch/m68k/emu/ +core-$(CONFIG_M68040) += arch/m68k/fpsp040/ +core-$(CONFIG_M68060) += arch/m68k/ifpsp060/ +core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/ +core-$(CONFIG_M68360) += arch/m68k/platform/68360/ +core-$(CONFIG_M68000) += arch/m68k/platform/68328/ +core-$(CONFIG_M68EZ328) += arch/m68k/platform/68EZ328/ +core-$(CONFIG_M68VZ328) += arch/m68k/platform/68VZ328/ +core-$(CONFIG_COLDFIRE) += arch/m68k/platform/coldfire/ +core-$(CONFIG_M5206) += arch/m68k/platform/5206/ +core-$(CONFIG_M5206e) += arch/m68k/platform/5206/ +core-$(CONFIG_M520x) += arch/m68k/platform/520x/ +core-$(CONFIG_M523x) += arch/m68k/platform/523x/ +core-$(CONFIG_M5249) += arch/m68k/platform/5249/ +core-$(CONFIG_M527x) += arch/m68k/platform/527x/ +core-$(CONFIG_M5272) += arch/m68k/platform/5272/ +core-$(CONFIG_M528x) += arch/m68k/platform/528x/ +core-$(CONFIG_M5307) += arch/m68k/platform/5307/ +core-$(CONFIG_M532x) += arch/m68k/platform/532x/ +core-$(CONFIG_M5407) += arch/m68k/platform/5407/ +core-$(CONFIG_M54xx) += arch/m68k/platform/54xx/ + + +all: zImage + +lilo: vmlinux + if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi + if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi + cat vmlinux > $(INSTALL_PATH)/vmlinux + cp System.map $(INSTALL_PATH)/System.map + if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi + +zImage compressed: vmlinux.gz + +vmlinux.gz: vmlinux + +ifndef CONFIG_KGDB + cp vmlinux vmlinux.tmp + $(STRIP) vmlinux.tmp + gzip -9c vmlinux.tmp >vmlinux.gz + rm vmlinux.tmp else -include $(srctree)/arch/m68k/Makefile_no + gzip -9c vmlinux >vmlinux.gz endif + +bzImage: vmlinux.bz2 + +vmlinux.bz2: vmlinux + +ifndef CONFIG_KGDB + cp vmlinux vmlinux.tmp + $(STRIP) vmlinux.tmp + bzip2 -1c vmlinux.tmp >vmlinux.bz2 + rm vmlinux.tmp +else + bzip2 -1c vmlinux >vmlinux.bz2 +endif + +archclean: + rm -f vmlinux.gz vmlinux.bz2 + +install: + sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)" diff --git a/arch/m68k/Makefile_mm b/arch/m68k/Makefile_mm deleted file mode 100644 index d449b6d5aecf..000000000000 --- a/arch/m68k/Makefile_mm +++ /dev/null @@ -1,121 +0,0 @@ -# -# m68k/Makefile -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1994 by Hamish Macdonald -# - -# override top level makefile -AS += -m68020 -LDFLAGS := -m m68kelf -KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds -ifneq ($(SUBARCH),$(ARCH)) - ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := $(call cc-cross-prefix, \ - m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-) - endif -endif - -ifdef CONFIG_SUN3 -LDFLAGS_vmlinux = -N -endif - -CHECKFLAGS += -D__mc68000__ - -# without -fno-strength-reduce the 53c7xx.c driver fails ;-( -KBUILD_CFLAGS += -pipe -fno-strength-reduce -ffixed-a2 - -# enable processor switch if compiled only for a single cpu -ifndef CONFIG_M68020 -ifndef CONFIG_M68030 - -ifndef CONFIG_M68060 -KBUILD_CFLAGS += -m68040 -endif - -ifndef CONFIG_M68040 -KBUILD_CFLAGS += -m68060 -endif - -endif -endif - -ifdef CONFIG_KGDB -# If configured for kgdb support, include debugging infos and keep the -# frame pointer -KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g -endif - -ifndef CONFIG_SUN3 -head-y := arch/m68k/kernel/head.o -else -head-y := arch/m68k/kernel/sun3-head.o -endif - -core-y += arch/m68k/kernel/ arch/m68k/mm/ -libs-y += arch/m68k/lib/ - -core-$(CONFIG_Q40) += arch/m68k/q40/ -core-$(CONFIG_AMIGA) += arch/m68k/amiga/ -core-$(CONFIG_ATARI) += arch/m68k/atari/ -core-$(CONFIG_MAC) += arch/m68k/mac/ -core-$(CONFIG_HP300) += arch/m68k/hp300/ -core-$(CONFIG_APOLLO) += arch/m68k/apollo/ -core-$(CONFIG_MVME147) += arch/m68k/mvme147/ -core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/ -core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/ -core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/ -core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/ -core-$(CONFIG_NATFEAT) += arch/m68k/emu/ -core-$(CONFIG_M68040) += arch/m68k/fpsp040/ -core-$(CONFIG_M68060) += arch/m68k/ifpsp060/ -core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/ - -all: zImage - -lilo: vmlinux - if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi - if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi - cat vmlinux > $(INSTALL_PATH)/vmlinux - cp System.map $(INSTALL_PATH)/System.map - if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi - -zImage compressed: vmlinux.gz - -vmlinux.gz: vmlinux - -ifndef CONFIG_KGDB - cp vmlinux vmlinux.tmp - $(STRIP) vmlinux.tmp - gzip -9c vmlinux.tmp >vmlinux.gz - rm vmlinux.tmp -else - gzip -9c vmlinux >vmlinux.gz -endif - -bzImage: vmlinux.bz2 - -vmlinux.bz2: vmlinux - -ifndef CONFIG_KGDB - cp vmlinux vmlinux.tmp - $(STRIP) vmlinux.tmp - bzip2 -1c vmlinux.tmp >vmlinux.bz2 - rm vmlinux.tmp -else - bzip2 -1c vmlinux >vmlinux.bz2 -endif - -archclean: - rm -f vmlinux.gz vmlinux.bz2 - -install: - sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)" diff --git a/arch/m68k/Makefile_no b/arch/m68k/Makefile_no deleted file mode 100644 index 844d3f172264..000000000000 --- a/arch/m68k/Makefile_no +++ /dev/null @@ -1,124 +0,0 @@ -# -# arch/m68k/Makefile -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# (C) Copyright 2002, Greg Ungerer <gerg@snapgear.com> -# - -platform-$(CONFIG_M68328) := 68328 -platform-$(CONFIG_M68EZ328) := 68EZ328 -platform-$(CONFIG_M68VZ328) := 68VZ328 -platform-$(CONFIG_M68360) := 68360 -platform-$(CONFIG_M5206) := 5206 -platform-$(CONFIG_M5206e) := 5206 -platform-$(CONFIG_M520x) := 520x -platform-$(CONFIG_M523x) := 523x -platform-$(CONFIG_M5249) := 5249 -platform-$(CONFIG_M527x) := 527x -platform-$(CONFIG_M5272) := 5272 -platform-$(CONFIG_M528x) := 528x -platform-$(CONFIG_M5307) := 5307 -platform-$(CONFIG_M532x) := 532x -platform-$(CONFIG_M5407) := 5407 -platform-$(CONFIG_M54xx) := 54xx -PLATFORM := $(platform-y) - -board-$(CONFIG_PILOT) := pilot -board-$(CONFIG_UC5272) := UC5272 -board-$(CONFIG_UC5282) := UC5282 -board-$(CONFIG_UCSIMM) := ucsimm -board-$(CONFIG_UCDIMM) := ucdimm -board-$(CONFIG_UCQUICC) := uCquicc -board-$(CONFIG_DRAGEN2) := de2 -board-$(CONFIG_ARNEWSH) := ARNEWSH -board-$(CONFIG_FREESCALE) := FREESCALE -board-$(CONFIG_M5235EVB) := M5235EVB -board-$(CONFIG_M5271EVB) := M5271EVB -board-$(CONFIG_M5275EVB) := M5275EVB -board-$(CONFIG_M5282EVB) := M5282EVB -board-$(CONFIG_ELITE) := eLITE -board-$(CONFIG_NETtel) := NETtel -board-$(CONFIG_SECUREEDGEMP3) := MP3 -board-$(CONFIG_CLEOPATRA) := CLEOPATRA -board-$(CONFIG_senTec) := senTec -board-$(CONFIG_SNEHA) := SNEHA -board-$(CONFIG_M5208EVB) := M5208EVB -board-$(CONFIG_MOD5272) := MOD5272 -board-$(CONFIG_AVNET) := AVNET -board-$(CONFIG_SAVANT) := SAVANT -BOARD := $(board-y) - -model-$(CONFIG_RAMKERNEL) := ram -model-$(CONFIG_ROMKERNEL) := rom -MODEL := $(model-y) - -# -# Some code support is grouped together for a common cpu-subclass (for -# example all ColdFire cpu's are very similar). Determine the sub-class -# for the selected cpu. ONLY need to define this for the non-base member -# of the family. -# -cpuclass-$(CONFIG_M5206) := coldfire -cpuclass-$(CONFIG_M5206e) := coldfire -cpuclass-$(CONFIG_M520x) := coldfire -cpuclass-$(CONFIG_M523x) := coldfire -cpuclass-$(CONFIG_M5249) := coldfire -cpuclass-$(CONFIG_M527x) := coldfire -cpuclass-$(CONFIG_M5272) := coldfire -cpuclass-$(CONFIG_M528x) := coldfire -cpuclass-$(CONFIG_M5307) := coldfire -cpuclass-$(CONFIG_M532x) := coldfire -cpuclass-$(CONFIG_M5407) := coldfire -cpuclass-$(CONFIG_M54xx) := coldfire -cpuclass-$(CONFIG_M68328) := 68328 -cpuclass-$(CONFIG_M68EZ328) := 68328 -cpuclass-$(CONFIG_M68VZ328) := 68328 -cpuclass-$(CONFIG_M68360) := 68360 -CPUCLASS := $(cpuclass-y) - -ifneq ($(CPUCLASS),$(PLATFORM)) -CLASSDIR := arch/m68k/platform/$(cpuclass-y)/ -endif - -export PLATFORM BOARD MODEL CPUCLASS - -# -# Some CFLAG additions based on specific CPU type. -# -cflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200) -cflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200) -cflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200) -cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307) -cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200) -cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307) -cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307) -cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307) -cflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307) -cflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200) -cflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307) -cflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200) -cflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200) -cflags-$(CONFIG_M68328) := -m68000 -cflags-$(CONFIG_M68EZ328) := -m68000 -cflags-$(CONFIG_M68VZ328) := -m68000 -cflags-$(CONFIG_M68360) := -m68332 - -KBUILD_AFLAGS += $(cflags-y) - -KBUILD_CFLAGS += $(cflags-y) -KBUILD_CFLAGS += -D__linux__ -KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\" - -head-y := arch/m68k/platform/$(cpuclass-y)/head.o - -core-y += arch/m68k/kernel/ \ - arch/m68k/mm/ \ - $(CLASSDIR) \ - arch/m68k/platform/$(PLATFORM)/ -libs-y += arch/m68k/lib/ - -archclean: - diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h index 876eec6f2b52..c3c5a8643e15 100644 --- a/arch/m68k/include/asm/entry.h +++ b/arch/m68k/include/asm/entry.h @@ -1,5 +1,254 @@ -#ifdef __uClinux__ -#include "entry_no.h" +#ifndef __M68K_ENTRY_H +#define __M68K_ENTRY_H + +#include <asm/setup.h> +#include <asm/page.h> +#ifdef __ASSEMBLY__ +#include <asm/thread_info.h> +#endif + +/* + * Stack layout in 'ret_from_exception': + * + * This allows access to the syscall arguments in registers d1-d5 + * + * 0(sp) - d1 + * 4(sp) - d2 + * 8(sp) - d3 + * C(sp) - d4 + * 10(sp) - d5 + * 14(sp) - a0 + * 18(sp) - a1 + * 1C(sp) - a2 + * 20(sp) - d0 + * 24(sp) - orig_d0 + * 28(sp) - stack adjustment + * 2C(sp) - [ sr ] [ format & vector ] + * 2E(sp) - [ pc-hiword ] [ sr ] + * 30(sp) - [ pc-loword ] [ pc-hiword ] + * 32(sp) - [ format & vector ] [ pc-loword ] + * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ + * M68K COLDFIRE + */ + +/* the following macro is used when enabling interrupts */ +#if defined(MACH_ATARI_ONLY) + /* block out HSYNC on the atari */ +#define ALLOWINT (~0x400) +#define MAX_NOINT_IPL 3 #else -#include "entry_mm.h" + /* portable version */ +#define ALLOWINT (~0x700) +#define MAX_NOINT_IPL 0 +#endif /* machine compilation types */ + +#ifdef __ASSEMBLY__ +/* + * This defines the normal kernel pt-regs layout. + * + * regs a3-a6 and d6-d7 are preserved by C code + * the kernel doesn't mess with usp unless it needs to + */ +#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ + +#ifdef CONFIG_COLDFIRE +#ifdef CONFIG_COLDFIRE_SW_A7 +/* + * This is made a little more tricky on older ColdFires. There is no + * separate supervisor and user stack pointers. Need to artificially + * construct a usp in software... When doing this we need to disable + * interrupts, otherwise bad things will happen. + */ +.globl sw_usp +.globl sw_ksp + +.macro SAVE_ALL_SYS + move #0x2700,%sr /* disable intrs */ + btst #5,%sp@(2) /* from user? */ + bnes 6f /* no, skip */ + movel %sp,sw_usp /* save user sp */ + addql #8,sw_usp /* remove exception */ + movel sw_ksp,%sp /* kernel sp */ + subql #8,%sp /* room for exception */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + movel sw_usp,%a0 /* get usp */ + movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */ + movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */ + bra 7f + 6: + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ + 7: +.endm + +.macro SAVE_ALL_INT + SAVE_ALL_SYS + moveq #-1,%d0 /* not system call entry */ + movel %d0,%sp@(PT_OFF_ORIG_D0) +.endm + +.macro RESTORE_USER + move #0x2700,%sr /* disable intrs */ + movel sw_usp,%a0 /* get usp */ + movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */ + movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */ + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + addql #8,%sp /* remove exception */ + movel %sp,sw_ksp /* save ksp */ + subql #8,sw_usp /* set exception */ + movel sw_usp,%sp /* restore usp */ + rte +.endm + +.macro RDUSP + movel sw_usp,%a3 +.endm + +.macro WRUSP + movel %a3,sw_usp +.endm + +#else /* !CONFIG_COLDFIRE_SW_A7 */ +/* + * Modern ColdFire parts have separate supervisor and user stack + * pointers. Simple load and restore macros for this case. + */ +.macro SAVE_ALL_SYS + move #0x2700,%sr /* disable intrs */ + clrl %sp@- /* stkadj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ +.endm + +.macro SAVE_ALL_INT + move #0x2700,%sr /* disable intrs */ + clrl %sp@- /* stkadj */ + pea -1:w /* orig d0 */ + movel %d0,%sp@- /* d0 */ + lea %sp@(-32),%sp /* space for 8 regs */ + moveml %d1-%d5/%a0-%a2,%sp@ +.endm + +.macro RESTORE_USER + moveml %sp@,%d1-%d5/%a0-%a2 + lea %sp@(32),%sp /* space for 8 regs */ + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stkadj */ + rte +.endm + +.macro RDUSP + /*move %usp,%a3*/ + .word 0x4e6b +.endm + +.macro WRUSP + /*move %a3,%usp*/ + .word 0x4e63 +.endm + +#endif /* !CONFIG_COLDFIRE_SW_A7 */ + +.macro SAVE_SWITCH_STACK + lea %sp@(-24),%sp /* 6 regs */ + moveml %a3-%a6/%d6-%d7,%sp@ +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@,%a3-%a6/%d6-%d7 + lea %sp@(24),%sp /* 6 regs */ +.endm + +#else /* !CONFIG_COLDFIRE */ + +/* + * All other types of m68k parts (68000, 680x0, CPU32) have the same + * entry and exit code. + */ + +/* + * a -1 in the orig_d0 field signifies + * that the stack frame is NOT for syscall + */ +.macro SAVE_ALL_INT + clrl %sp@- /* stk_adj */ + pea -1:w /* orig d0 */ + movel %d0,%sp@- /* d0 */ + moveml %d1-%d5/%a0-%a2,%sp@- +.endm + +.macro SAVE_ALL_SYS + clrl %sp@- /* stk_adj */ + movel %d0,%sp@- /* orig d0 */ + movel %d0,%sp@- /* d0 */ + moveml %d1-%d5/%a0-%a2,%sp@- +.endm + +.macro RESTORE_ALL + moveml %sp@+,%a0-%a2/%d1-%d5 + movel %sp@+,%d0 + addql #4,%sp /* orig d0 */ + addl %sp@+,%sp /* stk adj */ + rte +.endm + + +.macro SAVE_SWITCH_STACK + moveml %a3-%a6/%d6-%d7,%sp@- +.endm + +.macro RESTORE_SWITCH_STACK + moveml %sp@+,%a3-%a6/%d6-%d7 +.endm + +#endif /* !CONFIG_COLDFIRE */ + +/* + * Register %a2 is reserved and set to current task on MMU enabled systems. + * Non-MMU systems do not reserve %a2 in this way, and this definition is + * not used for them. + */ +#define curptr a2 + +#define GET_CURRENT(tmp) get_current tmp +.macro get_current reg=%d0 + movel %sp,\reg + andw #-THREAD_SIZE,\reg + movel \reg,%curptr + movel %curptr@,%curptr +.endm + +#else /* C source */ + +#define STR(X) STR1(X) +#define STR1(X) #X + +#define SAVE_ALL_INT \ + "clrl %%sp@-;" /* stk_adj */ \ + "pea -1:w;" /* orig d0 = -1 */ \ + "movel %%d0,%%sp@-;" /* d0 */ \ + "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-" + +#define GET_CURRENT(tmp) \ + "movel %%sp,"#tmp"\n\t" \ + "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ + "movel "#tmp",%%a2\n\t" \ + "movel %%a2@,%%a2" + #endif + +#endif /* __M68K_ENTRY_H */ diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h deleted file mode 100644 index 73b8c8fbed9c..000000000000 --- a/arch/m68k/include/asm/entry_mm.h +++ /dev/null @@ -1,128 +0,0 @@ -#ifndef __M68K_ENTRY_H -#define __M68K_ENTRY_H - -#include <asm/setup.h> -#include <asm/page.h> -#ifdef __ASSEMBLY__ -#include <asm/thread_info.h> -#endif - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - sr - * 2E(sp) - pc - * 32(sp) - format & vector - */ - -/* - * 97/05/14 Andreas: Register %a2 is now set to the current task throughout - * the whole kernel. - */ - -/* the following macro is used when enabling interrupts */ -#if defined(MACH_ATARI_ONLY) - /* block out HSYNC on the atari */ -#define ALLOWINT (~0x400) -#define MAX_NOINT_IPL 3 -#else - /* portable version */ -#define ALLOWINT (~0x700) -#define MAX_NOINT_IPL 0 -#endif /* machine compilation types */ - -#ifdef __ASSEMBLY__ - -#define curptr a2 - -LFLUSH_I_AND_D = 0x00000808 - -#define SAVE_ALL_INT save_all_int -#define SAVE_ALL_SYS save_all_sys -#define RESTORE_ALL restore_all -/* - * This defines the normal kernel pt-regs layout. - * - * regs a3-a6 and d6-d7 are preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -/* - * a -1 in the orig_d0 field signifies - * that the stack frame is NOT for syscall - */ -.macro save_all_int - clrl %sp@- | stk_adj - pea -1:w | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro save_all_sys - clrl %sp@- | stk_adj - movel %d0,%sp@- | orig d0 - movel %d0,%sp@- | d0 - moveml %d1-%d5/%a0-%a1/%curptr,%sp@- -.endm - -.macro restore_all - moveml %sp@+,%a0-%a1/%curptr/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp | orig d0 - addl %sp@+,%sp | stk adj - rte -.endm - -#define SWITCH_STACK_SIZE (6*4+4) /* includes return address */ - -#define SAVE_SWITCH_STACK save_switch_stack -#define RESTORE_SWITCH_STACK restore_switch_stack -#define GET_CURRENT(tmp) get_current tmp - -.macro save_switch_stack - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro restore_switch_stack - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -.macro get_current reg=%d0 - movel %sp,\reg - andw #-THREAD_SIZE,\reg - movel \reg,%curptr - movel %curptr@,%curptr -.endm - -#else /* C source */ - -#define STR(X) STR1(X) -#define STR1(X) #X - -#define SAVE_ALL_INT \ - "clrl %%sp@-;" /* stk_adj */ \ - "pea -1:w;" /* orig d0 = -1 */ \ - "movel %%d0,%%sp@-;" /* d0 */ \ - "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-" -#define GET_CURRENT(tmp) \ - "movel %%sp,"#tmp"\n\t" \ - "andw #-"STR(THREAD_SIZE)","#tmp"\n\t" \ - "movel "#tmp",%%a2\n\t" \ - "movel %%a2@,%%a2" - -#endif - -#endif /* __M68K_ENTRY_H */ diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h deleted file mode 100644 index 68611e3dbb1d..000000000000 --- a/arch/m68k/include/asm/entry_no.h +++ /dev/null @@ -1,181 +0,0 @@ -#ifndef __M68KNOMMU_ENTRY_H -#define __M68KNOMMU_ENTRY_H - -#include <asm/setup.h> -#include <asm/page.h> - -/* - * Stack layout in 'ret_from_exception': - * - * This allows access to the syscall arguments in registers d1-d5 - * - * 0(sp) - d1 - * 4(sp) - d2 - * 8(sp) - d3 - * C(sp) - d4 - * 10(sp) - d5 - * 14(sp) - a0 - * 18(sp) - a1 - * 1C(sp) - a2 - * 20(sp) - d0 - * 24(sp) - orig_d0 - * 28(sp) - stack adjustment - * 2C(sp) - [ sr ] [ format & vector ] - * 2E(sp) - [ pc-hiword ] [ sr ] - * 30(sp) - [ pc-loword ] [ pc-hiword ] - * 32(sp) - [ format & vector ] [ pc-loword ] - * ^^^^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^^^ - * M68K COLDFIRE - */ - -#define ALLOWINT (~0x700) - -#ifdef __ASSEMBLY__ - -#define SWITCH_STACK_SIZE (6*4+4) /* Includes return address */ - -/* - * This defines the normal kernel pt-regs layout. - * - * regs are a2-a6 and d6-d7 preserved by C code - * the kernel doesn't mess with usp unless it needs to - */ - -#ifdef CONFIG_COLDFIRE -#ifdef CONFIG_COLDFIRE_SW_A7 -/* - * This is made a little more tricky on older ColdFires. There is no - * separate supervisor and user stack pointers. Need to artificially - * construct a usp in software... When doing this we need to disable - * interrupts, otherwise bad things will happen. - */ -.globl sw_usp -.globl sw_ksp - -.macro SAVE_ALL - move #0x2700,%sr /* disable intrs */ - btst #5,%sp@(2) /* from user? */ - bnes 6f /* no, skip */ - movel %sp,sw_usp /* save user sp */ - addql #8,sw_usp /* remove exception */ - movel sw_ksp,%sp /* kernel sp */ - subql #8,%sp /* room for exception */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - movel sw_usp,%a0 /* get usp */ - movel %a0@-,%sp@(PT_OFF_PC) /* copy exception program counter */ - movel %a0@-,%sp@(PT_OFF_FORMATVEC)/*copy exception format/vector/sr */ - bra 7f - 6: - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ - 7: -.endm - -.macro RESTORE_USER - move #0x2700,%sr /* disable intrs */ - movel sw_usp,%a0 /* get usp */ - movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */ - movel %sp@(PT_OFF_FORMATVEC),%a0@-/*copy exception format/vector/sr */ - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - addql #8,%sp /* remove exception */ - movel %sp,sw_ksp /* save ksp */ - subql #8,sw_usp /* set exception */ - movel sw_usp,%sp /* restore usp */ - rte -.endm - -.macro RDUSP - movel sw_usp,%a3 -.endm - -.macro WRUSP - movel %a3,sw_usp -.endm - -#else /* !CONFIG_COLDFIRE_SW_A7 */ -/* - * Modern ColdFire parts have separate supervisor and user stack - * pointers. Simple load and restore macros for this case. - */ -.macro SAVE_ALL - move #0x2700,%sr /* disable intrs */ - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - lea %sp@(-32),%sp /* space for 8 regs */ - moveml %d1-%d5/%a0-%a2,%sp@ -.endm - -.macro RESTORE_USER - moveml %sp@,%d1-%d5/%a0-%a2 - lea %sp@(32),%sp /* space for 8 regs */ - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro RDUSP - /*move %usp,%a3*/ - .word 0x4e6b -.endm - -.macro WRUSP - /*move %a3,%usp*/ - .word 0x4e63 -.endm - -#endif /* !CONFIG_COLDFIRE_SW_A7 */ - -.macro SAVE_SWITCH_STACK - lea %sp@(-24),%sp /* 6 regs */ - moveml %a3-%a6/%d6-%d7,%sp@ -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@,%a3-%a6/%d6-%d7 - lea %sp@(24),%sp /* 6 regs */ -.endm - -#else /* !CONFIG_COLDFIRE */ - -/* - * Standard 68k interrupt entry and exit macros. - */ -.macro SAVE_ALL - clrl %sp@- /* stkadj */ - movel %d0,%sp@- /* orig d0 */ - movel %d0,%sp@- /* d0 */ - moveml %d1-%d5/%a0-%a2,%sp@- -.endm - -.macro RESTORE_ALL - moveml %sp@+,%a0-%a2/%d1-%d5 - movel %sp@+,%d0 - addql #4,%sp /* orig d0 */ - addl %sp@+,%sp /* stkadj */ - rte -.endm - -.macro SAVE_SWITCH_STACK - moveml %a3-%a6/%d6-%d7,%sp@- -.endm - -.macro RESTORE_SWITCH_STACK - moveml %sp@+,%a3-%a6/%d6-%d7 -.endm - -#endif /* !COLDFIRE_SW_A7 */ -#endif /* __ASSEMBLY__ */ -#endif /* __M68KNOMMU_ENTRY_H */ diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index b6bf2c518bac..eda62de7e607 100644 --- a/arch/m68k/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h @@ -90,15 +90,13 @@ #define MCFGPIO_PDDR_FECH 0xFC0A4013 #define MCFGPIO_PDDR_FECL 0xFC0A4014 -#define MCFGPIO_PPDSDR_BUSCTL 0xFC0A401A -#define MCFGPIO_PPDSDR_BE 0xFC0A401B -#define MCFGPIO_PPDSDR_CS 0xFC0A401C -#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401D -#define MCFGPIO_PPDSDR_QSPI 0xFC0A401E -#define MCFGPIO_PPDSDR_TIMER 0xFC0A401F -#define MCFGPIO_PPDSDR_UART 0xFC0A4021 -#define MCFGPIO_PPDSDR_FECH 0xFC0A4021 -#define MCFGPIO_PPDSDR_FECL 0xFC0A4022 +#define MCFGPIO_PPDSDR_CS 0xFC0A401A +#define MCFGPIO_PPDSDR_FECI2C 0xFC0A401B +#define MCFGPIO_PPDSDR_QSPI 0xFC0A401C +#define MCFGPIO_PPDSDR_TIMER 0xFC0A401D +#define MCFGPIO_PPDSDR_UART 0xFC0A401E +#define MCFGPIO_PPDSDR_FECH 0xFC0A401F +#define MCFGPIO_PPDSDR_FECL 0xFC0A4020 #define MCFGPIO_PCLRR_BUSCTL 0xFC0A4024 #define MCFGPIO_PCLRR_BE 0xFC0A4025 @@ -113,11 +111,11 @@ /* * Generic GPIO support */ -#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL -#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL -#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL -#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL -#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL +#define MCFGPIO_PODR MCFGPIO_PODR_CS +#define MCFGPIO_PDDR MCFGPIO_PDDR_CS +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_CS +#define MCFGPIO_SETR MCFGPIO_PPDSDR_CS +#define MCFGPIO_CLRR MCFGPIO_PCLRR_CS #define MCFGPIO_PIN_MAX 80 #define MCFGPIO_IRQ_MAX 8 diff --git a/arch/m68k/include/asm/mcfqspi.h b/arch/m68k/include/asm/mcfqspi.h index 39d90d51111d..7fe631972f1f 100644 --- a/arch/m68k/include/asm/mcfqspi.h +++ b/arch/m68k/include/asm/mcfqspi.h @@ -24,9 +24,11 @@ #if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) #define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) #elif defined(CONFIG_M5249) -#define MCFQSPI_IOBASE (MCF_MBAR + 0x300) -#elif defined(CONFIG_M520x) || defined(CONFIG_M532x) -#define MCFQSPI_IOBASE 0xFC058000 +#define MCFQSPI_IOBASE (MCF_MBAR + 0x300) +#elif defined(CONFIG_M520x) +#define MCFQSPI_IOBASE 0xFC05C000 +#elif defined(CONFIG_M532x) +#define MCFQSPI_IOBASE 0xFC058000 #endif #define MCFQSPI_IOSIZE 0x40 diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h index 90595721185f..a8d1c60eb9ce 100644 --- a/arch/m68k/include/asm/page_no.h +++ b/arch/m68k/include/asm/page_no.h @@ -5,6 +5,9 @@ extern unsigned long memory_start; extern unsigned long memory_end; +extern unsigned long _rambase; +extern unsigned long _ramstart; +extern unsigned long _ramend; #define get_user_page(vaddr) __get_free_page(GFP_KERNEL) #define free_user_page(page, addr) free_page(addr) diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h index d8ef53ac03f9..568facf30276 100644 --- a/arch/m68k/include/asm/processor.h +++ b/arch/m68k/include/asm/processor.h @@ -135,6 +135,12 @@ do { \ wrusp(_usp); \ } while(0) +static inline int handle_kernel_fault(struct pt_regs *regs) +{ + /* Any fault in kernel is fatal on non-mmu */ + return 0; +} + #endif /* Forward declaration, a strange C thing */ diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h index d64967ecfec6..5277e52715ec 100644 --- a/arch/m68k/include/asm/sections.h +++ b/arch/m68k/include/asm/sections.h @@ -3,4 +3,6 @@ #include <asm-generic/sections.h> +extern char _sbss[], _ebss[]; + #endif /* _ASM_M68K_SECTIONS_H */ diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index c482ebc9dd54..e7f0f2e5ad44 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -1,5 +1,21 @@ -ifdef CONFIG_MMU -include arch/m68k/kernel/Makefile_mm -else -include arch/m68k/kernel/Makefile_no +# +# Makefile for the linux kernel. +# + +extra-$(CONFIG_MMU) := head.o +extra-$(CONFIG_SUN3) := sun3-head.o +extra-y += vmlinux.lds + +obj-y := entry.o m68k_ksyms.o module.o process.o ptrace.o setup.o signal.o \ + sys_m68k.o syscalltable.o time.o traps.o + +obj-$(CONFIG_MMU) += ints.o devres.o vectors.o +devres-$(CONFIG_MMU) = ../../../kernel/irq/devres.o + +ifndef CONFIG_MMU_SUN3 +obj-y += dma.o endif +ifndef CONFIG_MMU +obj-y += init_task.o irq.o +endif + diff --git a/arch/m68k/kernel/Makefile_mm b/arch/m68k/kernel/Makefile_mm deleted file mode 100644 index aced67804579..000000000000 --- a/arch/m68k/kernel/Makefile_mm +++ /dev/null @@ -1,17 +0,0 @@ -# -# Makefile for the linux kernel. -# - -ifndef CONFIG_SUN3 - extra-y := head.o -else - extra-y := sun3-head.o -endif -extra-y += vmlinux.lds - -obj-y := entry.o process.o traps.o ints.o signal.o ptrace.o module.o \ - sys_m68k.o time.o setup.o m68k_ksyms.o devres.o syscalltable.o - -devres-y = ../../../kernel/irq/devres.o - -obj-y$(CONFIG_MMU_SUN3) += dma.o # no, it's not a typo diff --git a/arch/m68k/kernel/Makefile_no b/arch/m68k/kernel/Makefile_no deleted file mode 100644 index 37c3fc074c0a..000000000000 --- a/arch/m68k/kernel/Makefile_no +++ /dev/null @@ -1,10 +0,0 @@ -# -# Makefile for arch/m68knommu/kernel. -# - -extra-y := vmlinux.lds - -obj-y += dma.o entry.o init_task.o irq.o m68k_ksyms.o process.o ptrace.o \ - setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o - -obj-$(CONFIG_MODULES) += module.o diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S index 5f0f6b598b5a..1b4289061a64 100644 --- a/arch/m68k/kernel/entry_no.S +++ b/arch/m68k/kernel/entry_no.S @@ -43,7 +43,7 @@ .globl sys_vfork ENTRY(buserr) - SAVE_ALL + SAVE_ALL_INT moveq #-1,%d0 movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ @@ -52,7 +52,7 @@ ENTRY(buserr) jra ret_from_exception ENTRY(trap) - SAVE_ALL + SAVE_ALL_INT moveq #-1,%d0 movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ @@ -64,7 +64,7 @@ ENTRY(trap) .globl dbginterrupt ENTRY(dbginterrupt) - SAVE_ALL + SAVE_ALL_INT moveq #-1,%d0 movel %d0,%sp@(PT_OFF_ORIG_D0) movel %sp,%sp@- /* stack frame pointer argument */ diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c index 16b2de7f5101..2ed8c0fb1517 100644 --- a/arch/m68k/kernel/setup_no.c +++ b/arch/m68k/kernel/setup_no.c @@ -36,6 +36,7 @@ #include <asm/irq.h> #include <asm/machdep.h> #include <asm/pgtable.h> +#include <asm/sections.h> unsigned long memory_start; unsigned long memory_end; @@ -80,9 +81,6 @@ void (*mach_power_off)(void); #define CPU_INSTR_PER_JIFFY 16 #endif -extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; -extern int _ramstart, _ramend; - #if defined(CONFIG_UBOOT) /* * parse_uboot_commandline diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index c98add3f5f0f..89362f2bb56a 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -1,5 +1,1107 @@ -#ifdef CONFIG_MMU -#include "traps_mm.c" +/* + * linux/arch/m68k/kernel/traps.c + * + * Copyright (C) 1993, 1994 by Hamish Macdonald + * + * 68040 fixes by Michael Rausch + * 68040 fixes by Martin Apel + * 68040 fixes and writeback by Richard Zidlicky + * 68060 fixes by Roman Hodek + * 68060 fixes by Jesper Skov + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +/* + * Sets up all exception vectors + */ + +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/user.h> +#include <linux/string.h> +#include <linux/linkage.h> +#include <linux/init.h> +#include <linux/ptrace.h> +#include <linux/kallsyms.h> + +#include <asm/setup.h> +#include <asm/fpu.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/traps.h> +#include <asm/pgalloc.h> +#include <asm/machdep.h> +#include <asm/siginfo.h> + + +static const char *vec_names[] = { + [VEC_RESETSP] = "RESET SP", + [VEC_RESETPC] = "RESET PC", + [VEC_BUSERR] = "BUS ERROR", + [VEC_ADDRERR] = "ADDRESS ERROR", + [VEC_ILLEGAL] = "ILLEGAL INSTRUCTION", + [VEC_ZERODIV] = "ZERO DIVIDE", + [VEC_CHK] = "CHK", + [VEC_TRAP] = "TRAPcc", + [VEC_PRIV] = "PRIVILEGE VIOLATION", + [VEC_TRACE] = "TRACE", + [VEC_LINE10] = "LINE 1010", + [VEC_LINE11] = "LINE 1111", + [VEC_RESV12] = "UNASSIGNED RESERVED 12", + [VEC_COPROC] = "COPROCESSOR PROTOCOL VIOLATION", + [VEC_FORMAT] = "FORMAT ERROR", + [VEC_UNINT] = "UNINITIALIZED INTERRUPT", + [VEC_RESV16] = "UNASSIGNED RESERVED 16", + [VEC_RESV17] = "UNASSIGNED RESERVED 17", + [VEC_RESV18] = "UNASSIGNED RESERVED 18", + [VEC_RESV19] = "UNASSIGNED RESERVED 19", + [VEC_RESV20] = "UNASSIGNED RESERVED 20", + [VEC_RESV21] = "UNASSIGNED RESERVED 21", + [VEC_RESV22] = "UNASSIGNED RESERVED 22", + [VEC_RESV23] = "UNASSIGNED RESERVED 23", + [VEC_SPUR] = "SPURIOUS INTERRUPT", + [VEC_INT1] = "LEVEL 1 INT", + [VEC_INT2] = "LEVEL 2 INT", + [VEC_INT3] = "LEVEL 3 INT", + [VEC_INT4] = "LEVEL 4 INT", + [VEC_INT5] = "LEVEL 5 INT", + [VEC_INT6] = "LEVEL 6 INT", + [VEC_INT7] = "LEVEL 7 INT", + [VEC_SYS] = "SYSCALL", + [VEC_TRAP1] = "TRAP #1", + [VEC_TRAP2] = "TRAP #2", + [VEC_TRAP3] = "TRAP #3", + [VEC_TRAP4] = "TRAP #4", + [VEC_TRAP5] = "TRAP #5", + [VEC_TRAP6] = "TRAP #6", + [VEC_TRAP7] = "TRAP #7", + [VEC_TRAP8] = "TRAP #8", + [VEC_TRAP9] = "TRAP #9", + [VEC_TRAP10] = "TRAP #10", + [VEC_TRAP11] = "TRAP #11", + [VEC_TRAP12] = "TRAP #12", + [VEC_TRAP13] = "TRAP #13", + [VEC_TRAP14] = "TRAP #14", + [VEC_TRAP15] = "TRAP #15", + [VEC_FPBRUC] = "FPCP BSUN", + [VEC_FPIR] = "FPCP INEXACT", + [VEC_FPDIVZ] = "FPCP DIV BY 0", + [VEC_FPUNDER] = "FPCP UNDERFLOW", + [VEC_FPOE] = "FPCP OPERAND ERROR", + [VEC_FPOVER] = "FPCP OVERFLOW", + [VEC_FPNAN] = "FPCP SNAN", + [VEC_FPUNSUP] = "FPCP UNSUPPORTED OPERATION", + [VEC_MMUCFG] = "MMU CONFIGURATION ERROR", + [VEC_MMUILL] = "MMU ILLEGAL OPERATION ERROR", + [VEC_MMUACC] = "MMU ACCESS LEVEL VIOLATION ERROR", + [VEC_RESV59] = "UNASSIGNED RESERVED 59", + [VEC_UNIMPEA] = "UNASSIGNED RESERVED 60", + [VEC_UNIMPII] = "UNASSIGNED RESERVED 61", + [VEC_RESV62] = "UNASSIGNED RESERVED 62", + [VEC_RESV63] = "UNASSIGNED RESERVED 63", +}; + +static const char *space_names[] = { + [0] = "Space 0", + [USER_DATA] = "User Data", + [USER_PROGRAM] = "User Program", +#ifndef CONFIG_SUN3 + [3] = "Space 3", #else -#include "traps_no.c" + [FC_CONTROL] = "Control", +#endif + [4] = "Space 4", + [SUPER_DATA] = "Super Data", + [SUPER_PROGRAM] = "Super Program", + [CPU_SPACE] = "CPU" +}; + +void die_if_kernel(char *,struct pt_regs *,int); +asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, + unsigned long error_code); +int send_fault_sig(struct pt_regs *regs); + +asmlinkage void trap_c(struct frame *fp); + +#if defined (CONFIG_M68060) +static inline void access_error060 (struct frame *fp) +{ + unsigned long fslw = fp->un.fmt4.pc; /* is really FSLW for access error */ + +#ifdef DEBUG + printk("fslw=%#lx, fa=%#lx\n", fslw, fp->un.fmt4.effaddr); +#endif + + if (fslw & MMU060_BPE) { + /* branch prediction error -> clear branch cache */ + __asm__ __volatile__ ("movec %/cacr,%/d0\n\t" + "orl #0x00400000,%/d0\n\t" + "movec %/d0,%/cacr" + : : : "d0" ); + /* return if there's no other error */ + if (!(fslw & MMU060_ERR_BITS) && !(fslw & MMU060_SEE)) + return; + } + + if (fslw & (MMU060_DESC_ERR | MMU060_WP | MMU060_SP)) { + unsigned long errorcode; + unsigned long addr = fp->un.fmt4.effaddr; + + if (fslw & MMU060_MA) + addr = (addr + PAGE_SIZE - 1) & PAGE_MASK; + + errorcode = 1; + if (fslw & MMU060_DESC_ERR) { + __flush_tlb040_one(addr); + errorcode = 0; + } + if (fslw & MMU060_W) + errorcode |= 2; +#ifdef DEBUG + printk("errorcode = %d\n", errorcode ); +#endif + do_page_fault(&fp->ptregs, addr, errorcode); + } else if (fslw & (MMU060_SEE)){ + /* Software Emulation Error. + * fault during mem_read/mem_write in ifpsp060/os.S + */ + send_fault_sig(&fp->ptregs); + } else if (!(fslw & (MMU060_RE|MMU060_WE)) || + send_fault_sig(&fp->ptregs) > 0) { + printk("pc=%#lx, fa=%#lx\n", fp->ptregs.pc, fp->un.fmt4.effaddr); + printk( "68060 access error, fslw=%lx\n", fslw ); + trap_c( fp ); + } +} +#endif /* CONFIG_M68060 */ + +#if defined (CONFIG_M68040) +static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs) +{ + unsigned long mmusr; + mm_segment_t old_fs = get_fs(); + + set_fs(MAKE_MM_SEG(wbs)); + + if (iswrite) + asm volatile (".chip 68040; ptestw (%0); .chip 68k" : : "a" (addr)); + else + asm volatile (".chip 68040; ptestr (%0); .chip 68k" : : "a" (addr)); + + asm volatile (".chip 68040; movec %%mmusr,%0; .chip 68k" : "=r" (mmusr)); + + set_fs(old_fs); + + return mmusr; +} + +static inline int do_040writeback1(unsigned short wbs, unsigned long wba, + unsigned long wbd) +{ + int res = 0; + mm_segment_t old_fs = get_fs(); + + /* set_fs can not be moved, otherwise put_user() may oops */ + set_fs(MAKE_MM_SEG(wbs)); + + switch (wbs & WBSIZ_040) { + case BA_SIZE_BYTE: + res = put_user(wbd & 0xff, (char __user *)wba); + break; + case BA_SIZE_WORD: + res = put_user(wbd & 0xffff, (short __user *)wba); + break; + case BA_SIZE_LONG: + res = put_user(wbd, (int __user *)wba); + break; + } + + /* set_fs can not be moved, otherwise put_user() may oops */ + set_fs(old_fs); + + +#ifdef DEBUG + printk("do_040writeback1, res=%d\n",res); +#endif + + return res; +} + +/* after an exception in a writeback the stack frame corresponding + * to that exception is discarded, set a few bits in the old frame + * to simulate what it should look like + */ +static inline void fix_xframe040(struct frame *fp, unsigned long wba, unsigned short wbs) +{ + fp->un.fmt7.faddr = wba; + fp->un.fmt7.ssw = wbs & 0xff; + if (wba != current->thread.faddr) + fp->un.fmt7.ssw |= MA_040; +} + +static inline void do_040writebacks(struct frame *fp) +{ + int res = 0; +#if 0 + if (fp->un.fmt7.wb1s & WBV_040) + printk("access_error040: cannot handle 1st writeback. oops.\n"); +#endif + + if ((fp->un.fmt7.wb2s & WBV_040) && + !(fp->un.fmt7.wb2s & WBTT_040)) { + res = do_040writeback1(fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, + fp->un.fmt7.wb2d); + if (res) + fix_xframe040(fp, fp->un.fmt7.wb2a, fp->un.fmt7.wb2s); + else + fp->un.fmt7.wb2s = 0; + } + + /* do the 2nd wb only if the first one was successful (except for a kernel wb) */ + if (fp->un.fmt7.wb3s & WBV_040 && (!res || fp->un.fmt7.wb3s & 4)) { + res = do_040writeback1(fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, + fp->un.fmt7.wb3d); + if (res) + { + fix_xframe040(fp, fp->un.fmt7.wb3a, fp->un.fmt7.wb3s); + + fp->un.fmt7.wb2s = fp->un.fmt7.wb3s; + fp->un.fmt7.wb3s &= (~WBV_040); + fp->un.fmt7.wb2a = fp->un.fmt7.wb3a; + fp->un.fmt7.wb2d = fp->un.fmt7.wb3d; + } + else + fp->un.fmt7.wb3s = 0; + } + + if (res) + send_fault_sig(&fp->ptregs); +} + +/* + * called from sigreturn(), must ensure userspace code didn't + * manipulate exception frame to circumvent protection, then complete + * pending writebacks + * we just clear TM2 to turn it into a userspace access + */ +asmlinkage void berr_040cleanup(struct frame *fp) +{ + fp->un.fmt7.wb2s &= ~4; + fp->un.fmt7.wb3s &= ~4; + + do_040writebacks(fp); +} + +static inline void access_error040(struct frame *fp) +{ + unsigned short ssw = fp->un.fmt7.ssw; + unsigned long mmusr; + +#ifdef DEBUG + printk("ssw=%#x, fa=%#lx\n", ssw, fp->un.fmt7.faddr); + printk("wb1s=%#x, wb2s=%#x, wb3s=%#x\n", fp->un.fmt7.wb1s, + fp->un.fmt7.wb2s, fp->un.fmt7.wb3s); + printk ("wb2a=%lx, wb3a=%lx, wb2d=%lx, wb3d=%lx\n", + fp->un.fmt7.wb2a, fp->un.fmt7.wb3a, + fp->un.fmt7.wb2d, fp->un.fmt7.wb3d); +#endif + + if (ssw & ATC_040) { + unsigned long addr = fp->un.fmt7.faddr; + unsigned long errorcode; + + /* + * The MMU status has to be determined AFTER the address + * has been corrected if there was a misaligned access (MA). + */ + if (ssw & MA_040) + addr = (addr + 7) & -8; + + /* MMU error, get the MMUSR info for this access */ + mmusr = probe040(!(ssw & RW_040), addr, ssw); +#ifdef DEBUG + printk("mmusr = %lx\n", mmusr); +#endif + errorcode = 1; + if (!(mmusr & MMU_R_040)) { + /* clear the invalid atc entry */ + __flush_tlb040_one(addr); + errorcode = 0; + } + + /* despite what documentation seems to say, RMW + * accesses have always both the LK and RW bits set */ + if (!(ssw & RW_040) || (ssw & LK_040)) + errorcode |= 2; + + if (do_page_fault(&fp->ptregs, addr, errorcode)) { +#ifdef DEBUG + printk("do_page_fault() !=0\n"); +#endif + if (user_mode(&fp->ptregs)){ + /* delay writebacks after signal delivery */ +#ifdef DEBUG + printk(".. was usermode - return\n"); +#endif + return; + } + /* disable writeback into user space from kernel + * (if do_page_fault didn't fix the mapping, + * the writeback won't do good) + */ +disable_wb: +#ifdef DEBUG + printk(".. disabling wb2\n"); +#endif + if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr) + fp->un.fmt7.wb2s &= ~WBV_040; + if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr) + fp->un.fmt7.wb3s &= ~WBV_040; + } + } else { + /* In case of a bus error we either kill the process or expect + * the kernel to catch the fault, which then is also responsible + * for cleaning up the mess. + */ + current->thread.signo = SIGBUS; + current->thread.faddr = fp->un.fmt7.faddr; + if (send_fault_sig(&fp->ptregs) >= 0) + printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw, + fp->un.fmt7.faddr); + goto disable_wb; + } + + do_040writebacks(fp); +} +#endif /* CONFIG_M68040 */ + +#if defined(CONFIG_SUN3) +#include <asm/sun3mmu.h> + +extern int mmu_emu_handle_fault (unsigned long, int, int); + +/* sun3 version of bus_error030 */ + +static inline void bus_error030 (struct frame *fp) +{ + unsigned char buserr_type = sun3_get_buserr (); + unsigned long addr, errorcode; + unsigned short ssw = fp->un.fmtb.ssw; + extern unsigned long _sun3_map_test_start, _sun3_map_test_end; + +#ifdef DEBUG + if (ssw & (FC | FB)) + printk ("Instruction fault at %#010lx\n", + ssw & FC ? + fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2 + : + fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr); + if (ssw & DF) + printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, + space_names[ssw & DFC], fp->ptregs.pc); +#endif + + /* + * Check if this page should be demand-mapped. This needs to go before + * the testing for a bad kernel-space access (demand-mapping applies + * to kernel accesses too). + */ + + if ((ssw & DF) + && (buserr_type & (SUN3_BUSERR_PROTERR | SUN3_BUSERR_INVALID))) { + if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 0)) + return; + } + + /* Check for kernel-space pagefault (BAD). */ + if (fp->ptregs.sr & PS_S) { + /* kernel fault must be a data fault to user space */ + if (! ((ssw & DF) && ((ssw & DFC) == USER_DATA))) { + // try checking the kernel mappings before surrender + if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 1)) + return; + /* instruction fault or kernel data fault! */ + if (ssw & (FC | FB)) + printk ("Instruction fault at %#010lx\n", + fp->ptregs.pc); + if (ssw & DF) { + /* was this fault incurred testing bus mappings? */ + if((fp->ptregs.pc >= (unsigned long)&_sun3_map_test_start) && + (fp->ptregs.pc <= (unsigned long)&_sun3_map_test_end)) { + send_fault_sig(&fp->ptregs); + return; + } + + printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, + space_names[ssw & DFC], fp->ptregs.pc); + } + printk ("BAD KERNEL BUSERR\n"); + + die_if_kernel("Oops", &fp->ptregs,0); + force_sig(SIGKILL, current); + return; + } + } else { + /* user fault */ + if (!(ssw & (FC | FB)) && !(ssw & DF)) + /* not an instruction fault or data fault! BAD */ + panic ("USER BUSERR w/o instruction or data fault"); + } + + + /* First handle the data fault, if any. */ + if (ssw & DF) { + addr = fp->un.fmtb.daddr; + +// errorcode bit 0: 0 -> no page 1 -> protection fault +// errorcode bit 1: 0 -> read fault 1 -> write fault + +// (buserr_type & SUN3_BUSERR_PROTERR) -> protection fault +// (buserr_type & SUN3_BUSERR_INVALID) -> invalid page fault + + if (buserr_type & SUN3_BUSERR_PROTERR) + errorcode = 0x01; + else if (buserr_type & SUN3_BUSERR_INVALID) + errorcode = 0x00; + else { +#ifdef DEBUG + printk ("*** unexpected busfault type=%#04x\n", buserr_type); + printk ("invalid %s access at %#lx from pc %#lx\n", + !(ssw & RW) ? "write" : "read", addr, + fp->ptregs.pc); +#endif + die_if_kernel ("Oops", &fp->ptregs, buserr_type); + force_sig (SIGBUS, current); + return; + } + +//todo: wtf is RM bit? --m + if (!(ssw & RW) || ssw & RM) + errorcode |= 0x02; + + /* Handle page fault. */ + do_page_fault (&fp->ptregs, addr, errorcode); + + /* Retry the data fault now. */ + return; + } + + /* Now handle the instruction fault. */ + + /* Get the fault address. */ + if (fp->ptregs.format == 0xA) + addr = fp->ptregs.pc + 4; + else + addr = fp->un.fmtb.baddr; + if (ssw & FC) + addr -= 2; + + if (buserr_type & SUN3_BUSERR_INVALID) { + if (!mmu_emu_handle_fault (fp->un.fmtb.daddr, 1, 0)) + do_page_fault (&fp->ptregs, addr, 0); + } else { +#ifdef DEBUG + printk ("protection fault on insn access (segv).\n"); +#endif + force_sig (SIGSEGV, current); + } +} +#else +#if defined(CPU_M68020_OR_M68030) +static inline void bus_error030 (struct frame *fp) +{ + volatile unsigned short temp; + unsigned short mmusr; + unsigned long addr, errorcode; + unsigned short ssw = fp->un.fmtb.ssw; +#ifdef DEBUG + unsigned long desc; + + printk ("pid = %x ", current->pid); + printk ("SSW=%#06x ", ssw); + + if (ssw & (FC | FB)) + printk ("Instruction fault at %#010lx\n", + ssw & FC ? + fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2 + : + fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr); + if (ssw & DF) + printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, + space_names[ssw & DFC], fp->ptregs.pc); +#endif + + /* ++andreas: If a data fault and an instruction fault happen + at the same time map in both pages. */ + + /* First handle the data fault, if any. */ + if (ssw & DF) { + addr = fp->un.fmtb.daddr; + +#ifdef DEBUG + asm volatile ("ptestr %3,%2@,#7,%0\n\t" + "pmove %%psr,%1@" + : "=a&" (desc) + : "a" (&temp), "a" (addr), "d" (ssw)); +#else + asm volatile ("ptestr %2,%1@,#7\n\t" + "pmove %%psr,%0@" + : : "a" (&temp), "a" (addr), "d" (ssw)); +#endif + mmusr = temp; + +#ifdef DEBUG + printk("mmusr is %#x for addr %#lx in task %p\n", + mmusr, addr, current); + printk("descriptor address is %#lx, contents %#lx\n", + __va(desc), *(unsigned long *)__va(desc)); +#endif + + errorcode = (mmusr & MMU_I) ? 0 : 1; + if (!(ssw & RW) || (ssw & RM)) + errorcode |= 2; + + if (mmusr & (MMU_I | MMU_WP)) { + if (ssw & 4) { + printk("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, + space_names[ssw & DFC], fp->ptregs.pc); + goto buserr; + } + /* Don't try to do anything further if an exception was + handled. */ + if (do_page_fault (&fp->ptregs, addr, errorcode) < 0) + return; + } else if (!(mmusr & MMU_I)) { + /* probably a 020 cas fault */ + if (!(ssw & RM) && send_fault_sig(&fp->ptregs) > 0) + printk("unexpected bus error (%#x,%#x)\n", ssw, mmusr); + } else if (mmusr & (MMU_B|MMU_L|MMU_S)) { + printk("invalid %s access at %#lx from pc %#lx\n", + !(ssw & RW) ? "write" : "read", addr, + fp->ptregs.pc); + die_if_kernel("Oops",&fp->ptregs,mmusr); + force_sig(SIGSEGV, current); + return; + } else { +#if 0 + static volatile long tlong; +#endif + + printk("weird %s access at %#lx from pc %#lx (ssw is %#x)\n", + !(ssw & RW) ? "write" : "read", addr, + fp->ptregs.pc, ssw); + asm volatile ("ptestr #1,%1@,#0\n\t" + "pmove %%psr,%0@" + : /* no outputs */ + : "a" (&temp), "a" (addr)); + mmusr = temp; + + printk ("level 0 mmusr is %#x\n", mmusr); +#if 0 + asm volatile ("pmove %%tt0,%0@" + : /* no outputs */ + : "a" (&tlong)); + printk("tt0 is %#lx, ", tlong); + asm volatile ("pmove %%tt1,%0@" + : /* no outputs */ + : "a" (&tlong)); + printk("tt1 is %#lx\n", tlong); +#endif +#ifdef DEBUG + printk("Unknown SIGSEGV - 1\n"); +#endif + die_if_kernel("Oops",&fp->ptregs,mmusr); + force_sig(SIGSEGV, current); + return; + } + + /* setup an ATC entry for the access about to be retried */ + if (!(ssw & RW) || (ssw & RM)) + asm volatile ("ploadw %1,%0@" : /* no outputs */ + : "a" (addr), "d" (ssw)); + else + asm volatile ("ploadr %1,%0@" : /* no outputs */ + : "a" (addr), "d" (ssw)); + } + + /* Now handle the instruction fault. */ + + if (!(ssw & (FC|FB))) + return; + + if (fp->ptregs.sr & PS_S) { + printk("Instruction fault at %#010lx\n", + fp->ptregs.pc); + buserr: + printk ("BAD KERNEL BUSERR\n"); + die_if_kernel("Oops",&fp->ptregs,0); + force_sig(SIGKILL, current); + return; + } + + /* get the fault address */ + if (fp->ptregs.format == 10) + addr = fp->ptregs.pc + 4; + else + addr = fp->un.fmtb.baddr; + if (ssw & FC) + addr -= 2; + + if ((ssw & DF) && ((addr ^ fp->un.fmtb.daddr) & PAGE_MASK) == 0) + /* Insn fault on same page as data fault. But we + should still create the ATC entry. */ + goto create_atc_entry; + +#ifdef DEBUG + asm volatile ("ptestr #1,%2@,#7,%0\n\t" + "pmove %%psr,%1@" + : "=a&" (desc) + : "a" (&temp), "a" (addr)); +#else + asm volatile ("ptestr #1,%1@,#7\n\t" + "pmove %%psr,%0@" + : : "a" (&temp), "a" (addr)); +#endif + mmusr = temp; + +#ifdef DEBUG + printk ("mmusr is %#x for addr %#lx in task %p\n", + mmusr, addr, current); + printk ("descriptor address is %#lx, contents %#lx\n", + __va(desc), *(unsigned long *)__va(desc)); +#endif + + if (mmusr & MMU_I) + do_page_fault (&fp->ptregs, addr, 0); + else if (mmusr & (MMU_B|MMU_L|MMU_S)) { + printk ("invalid insn access at %#lx from pc %#lx\n", + addr, fp->ptregs.pc); +#ifdef DEBUG + printk("Unknown SIGSEGV - 2\n"); +#endif + die_if_kernel("Oops",&fp->ptregs,mmusr); + force_sig(SIGSEGV, current); + return; + } + +create_atc_entry: + /* setup an ATC entry for the access about to be retried */ + asm volatile ("ploadr #2,%0@" : /* no outputs */ + : "a" (addr)); +} +#endif /* CPU_M68020_OR_M68030 */ +#endif /* !CONFIG_SUN3 */ + +asmlinkage void buserr_c(struct frame *fp) +{ + /* Only set esp0 if coming from user mode */ + if (user_mode(&fp->ptregs)) + current->thread.esp0 = (unsigned long) fp; + +#ifdef DEBUG + printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format); +#endif + + switch (fp->ptregs.format) { +#if defined (CONFIG_M68060) + case 4: /* 68060 access error */ + access_error060 (fp); + break; +#endif +#if defined (CONFIG_M68040) + case 0x7: /* 68040 access error */ + access_error040 (fp); + break; +#endif +#if defined (CPU_M68020_OR_M68030) + case 0xa: + case 0xb: + bus_error030 (fp); + break; +#endif + default: + die_if_kernel("bad frame format",&fp->ptregs,0); +#ifdef DEBUG + printk("Unknown SIGSEGV - 4\n"); +#endif + force_sig(SIGSEGV, current); + } +} + + +static int kstack_depth_to_print = 48; + +void show_trace(unsigned long *stack) +{ + unsigned long *endstack; + unsigned long addr; + int i; + + printk("Call Trace:"); + addr = (unsigned long)stack + THREAD_SIZE - 1; + endstack = (unsigned long *)(addr & -THREAD_SIZE); + i = 0; + while (stack + 1 <= endstack) { + addr = *stack++; + /* + * If the address is either in the text segment of the + * kernel, or in the region which contains vmalloc'ed + * memory, it *may* be the address of a calling + * routine; if so, print it so that someone tracing + * down the cause of the crash will be able to figure + * out the call path that was taken. + */ + if (__kernel_text_address(addr)) { +#ifndef CONFIG_KALLSYMS + if (i % 5 == 0) + printk("\n "); +#endif + printk(" [<%08lx>] %pS\n", addr, (void *)addr); + i++; + } + } + printk("\n"); +} + +void show_registers(struct pt_regs *regs) +{ + struct frame *fp = (struct frame *)regs; + mm_segment_t old_fs = get_fs(); + u16 c, *cp; + unsigned long addr; + int i; + + print_modules(); + printk("PC: [<%08lx>] %pS\n", regs->pc, (void *)regs->pc); + printk("SR: %04x SP: %p a2: %08lx\n", regs->sr, regs, regs->a2); + printk("d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", + regs->d0, regs->d1, regs->d2, regs->d3); + printk("d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", + regs->d4, regs->d5, regs->a0, regs->a1); + + printk("Process %s (pid: %d, task=%p)\n", + current->comm, task_pid_nr(current), current); + addr = (unsigned long)&fp->un; + printk("Frame format=%X ", regs->format); + switch (regs->format) { + case 0x2: + printk("instr addr=%08lx\n", fp->un.fmt2.iaddr); + addr += sizeof(fp->un.fmt2); + break; + case 0x3: + printk("eff addr=%08lx\n", fp->un.fmt3.effaddr); + addr += sizeof(fp->un.fmt3); + break; + case 0x4: + printk((CPU_IS_060 ? "fault addr=%08lx fslw=%08lx\n" + : "eff addr=%08lx pc=%08lx\n"), + fp->un.fmt4.effaddr, fp->un.fmt4.pc); + addr += sizeof(fp->un.fmt4); + break; + case 0x7: + printk("eff addr=%08lx ssw=%04x faddr=%08lx\n", + fp->un.fmt7.effaddr, fp->un.fmt7.ssw, fp->un.fmt7.faddr); + printk("wb 1 stat/addr/data: %04x %08lx %08lx\n", + fp->un.fmt7.wb1s, fp->un.fmt7.wb1a, fp->un.fmt7.wb1dpd0); + printk("wb 2 stat/addr/data: %04x %08lx %08lx\n", + fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, fp->un.fmt7.wb2d); + printk("wb 3 stat/addr/data: %04x %08lx %08lx\n", + fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, fp->un.fmt7.wb3d); + printk("push data: %08lx %08lx %08lx %08lx\n", + fp->un.fmt7.wb1dpd0, fp->un.fmt7.pd1, fp->un.fmt7.pd2, + fp->un.fmt7.pd3); + addr += sizeof(fp->un.fmt7); + break; + case 0x9: + printk("instr addr=%08lx\n", fp->un.fmt9.iaddr); + addr += sizeof(fp->un.fmt9); + break; + case 0xa: + printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n", + fp->un.fmta.ssw, fp->un.fmta.isc, fp->un.fmta.isb, + fp->un.fmta.daddr, fp->un.fmta.dobuf); + addr += sizeof(fp->un.fmta); + break; + case 0xb: + printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n", + fp->un.fmtb.ssw, fp->un.fmtb.isc, fp->un.fmtb.isb, + fp->un.fmtb.daddr, fp->un.fmtb.dobuf); + printk("baddr=%08lx dibuf=%08lx ver=%x\n", + fp->un.fmtb.baddr, fp->un.fmtb.dibuf, fp->un.fmtb.ver); + addr += sizeof(fp->un.fmtb); + break; + default: + printk("\n"); + } + show_stack(NULL, (unsigned long *)addr); + + printk("Code:"); + set_fs(KERNEL_DS); + cp = (u16 *)regs->pc; + for (i = -8; i < 16; i++) { + if (get_user(c, cp + i) && i >= 0) { + printk(" Bad PC value."); + break; + } + printk(i ? " %04x" : " <%04x>", c); + } + set_fs(old_fs); + printk ("\n"); +} + +void show_stack(struct task_struct *task, unsigned long *stack) +{ + unsigned long *p; + unsigned long *endstack; + int i; + + if (!stack) { + if (task) + stack = (unsigned long *)task->thread.esp0; + else + stack = (unsigned long *)&stack; + } + endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1) & -THREAD_SIZE); + + printk("Stack from %08lx:", (unsigned long)stack); + p = stack; + for (i = 0; i < kstack_depth_to_print; i++) { + if (p + 1 > endstack) + break; + if (i % 8 == 0) + printk("\n "); + printk(" %08lx", *p++); + } + printk("\n"); + show_trace(stack); +} + +/* + * The architecture-independent backtrace generator + */ +void dump_stack(void) +{ + unsigned long stack; + + show_trace(&stack); +} + +EXPORT_SYMBOL(dump_stack); + +/* + * The vector number returned in the frame pointer may also contain + * the "fs" (Fault Status) bits on ColdFire. These are in the bottom + * 2 bits, and upper 2 bits. So we need to mask out the real vector + * number before using it in comparisons. You don't need to do this on + * real 68k parts, but it won't hurt either. + */ + +void bad_super_trap (struct frame *fp) +{ + int vector = (fp->ptregs.vector >> 2) & 0xff; + + console_verbose(); + if (vector < ARRAY_SIZE(vec_names)) + printk ("*** %s *** FORMAT=%X\n", + vec_names[vector], + fp->ptregs.format); + else + printk ("*** Exception %d *** FORMAT=%X\n", + vector, fp->ptregs.format); + if (vector == VEC_ADDRERR && CPU_IS_020_OR_030) { + unsigned short ssw = fp->un.fmtb.ssw; + + printk ("SSW=%#06x ", ssw); + + if (ssw & RC) + printk ("Pipe stage C instruction fault at %#010lx\n", + (fp->ptregs.format) == 0xA ? + fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2); + if (ssw & RB) + printk ("Pipe stage B instruction fault at %#010lx\n", + (fp->ptregs.format) == 0xA ? + fp->ptregs.pc + 4 : fp->un.fmtb.baddr); + if (ssw & DF) + printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", + ssw & RW ? "read" : "write", + fp->un.fmtb.daddr, space_names[ssw & DFC], + fp->ptregs.pc); + } + printk ("Current process id is %d\n", task_pid_nr(current)); + die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0); +} + +asmlinkage void trap_c(struct frame *fp) +{ + int sig; + int vector = (fp->ptregs.vector >> 2) & 0xff; + siginfo_t info; + + if (fp->ptregs.sr & PS_S) { + if (vector == VEC_TRACE) { + /* traced a trapping instruction on a 68020/30, + * real exception will be executed afterwards. + */ + } else if (!handle_kernel_fault(&fp->ptregs)) + bad_super_trap(fp); + return; + } + + /* send the appropriate signal to the user program */ + switch (vector) { + case VEC_ADDRERR: + info.si_code = BUS_ADRALN; + sig = SIGBUS; + break; + case VEC_ILLEGAL: + case VEC_LINE10: + case VEC_LINE11: + info.si_code = ILL_ILLOPC; + sig = SIGILL; + break; + case VEC_PRIV: + info.si_code = ILL_PRVOPC; + sig = SIGILL; + break; + case VEC_COPROC: + info.si_code = ILL_COPROC; + sig = SIGILL; + break; + case VEC_TRAP1: + case VEC_TRAP2: + case VEC_TRAP3: + case VEC_TRAP4: + case VEC_TRAP5: + case VEC_TRAP6: + case VEC_TRAP7: + case VEC_TRAP8: + case VEC_TRAP9: + case VEC_TRAP10: + case VEC_TRAP11: + case VEC_TRAP12: + case VEC_TRAP13: + case VEC_TRAP14: + info.si_code = ILL_ILLTRP; + sig = SIGILL; + break; + case VEC_FPBRUC: + case VEC_FPOE: + case VEC_FPNAN: + info.si_code = FPE_FLTINV; + sig = SIGFPE; + break; + case VEC_FPIR: + info.si_code = FPE_FLTRES; + sig = SIGFPE; + break; + case VEC_FPDIVZ: + info.si_code = FPE_FLTDIV; + sig = SIGFPE; + break; + case VEC_FPUNDER: + info.si_code = FPE_FLTUND; + sig = SIGFPE; + break; + case VEC_FPOVER: + info.si_code = FPE_FLTOVF; + sig = SIGFPE; + break; + case VEC_ZERODIV: + info.si_code = FPE_INTDIV; + sig = SIGFPE; + break; + case VEC_CHK: + case VEC_TRAP: + info.si_code = FPE_INTOVF; + sig = SIGFPE; + break; + case VEC_TRACE: /* ptrace single step */ + info.si_code = TRAP_TRACE; + sig = SIGTRAP; + break; + case VEC_TRAP15: /* breakpoint */ + info.si_code = TRAP_BRKPT; + sig = SIGTRAP; + break; + default: + info.si_code = ILL_ILLOPC; + sig = SIGILL; + break; + } + info.si_signo = sig; + info.si_errno = 0; + switch (fp->ptregs.format) { + default: + info.si_addr = (void *) fp->ptregs.pc; + break; + case 2: + info.si_addr = (void *) fp->un.fmt2.iaddr; + break; + case 7: + info.si_addr = (void *) fp->un.fmt7.effaddr; + break; + case 9: + info.si_addr = (void *) fp->un.fmt9.iaddr; + break; + case 10: + info.si_addr = (void *) fp->un.fmta.daddr; + break; + case 11: + info.si_addr = (void *) fp->un.fmtb.daddr; + break; + } + force_sig_info (sig, &info, current); +} + +void die_if_kernel (char *str, struct pt_regs *fp, int nr) +{ + if (!(fp->sr & PS_S)) + return; + + console_verbose(); + printk("%s: %08x\n",str,nr); + show_registers(fp); + add_taint(TAINT_DIE); + do_exit(SIGSEGV); +} + +asmlinkage void set_esp0(unsigned long ssp) +{ + current->thread.esp0 = ssp; +} + +/* + * This function is called if an error occur while accessing + * user-space from the fpsp040 code. + */ +asmlinkage void fpsp040_die(void) +{ + do_exit(SIGSEGV); +} + +#ifdef CONFIG_M68KFPU_EMU +asmlinkage void fpemu_signal(int signal, int code, void *addr) +{ + siginfo_t info; + + info.si_signo = signal; + info.si_errno = 0; + info.si_code = code; + info.si_addr = addr; + force_sig_info(signal, &info, current); +} #endif diff --git a/arch/m68k/kernel/traps_mm.c b/arch/m68k/kernel/traps_mm.c deleted file mode 100644 index 4022bbc28878..000000000000 --- a/arch/m68k/kernel/traps_mm.c +++ /dev/null @@ -1,1207 +0,0 @@ -/* - * linux/arch/m68k/kernel/traps.c - * - * Copyright (C) 1993, 1994 by Hamish Macdonald - * - * 68040 fixes by Michael Rausch - * 68040 fixes by Martin Apel - * 68040 fixes and writeback by Richard Zidlicky - * 68060 fixes by Roman Hodek - * 68060 fixes by Jesper Skov - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -/* - * Sets up all exception vectors - */ - -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/user.h> -#include <linux/string.h> -#include <linux/linkage.h> -#include <linux/init.h> -#include <linux/ptrace.h> -#include <linux/kallsyms.h> - -#include <asm/setup.h> -#include <asm/fpu.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/traps.h> -#include <asm/pgalloc.h> -#include <asm/machdep.h> -#include <asm/siginfo.h> - -/* assembler routines */ -asmlinkage void system_call(void); -asmlinkage void buserr(void); -asmlinkage void trap(void); -asmlinkage void nmihandler(void); -#ifdef CONFIG_M68KFPU_EMU -asmlinkage void fpu_emu(void); -#endif - -e_vector vectors[256]; - -/* nmi handler for the Amiga */ -asm(".text\n" - __ALIGN_STR "\n" - "nmihandler: rte"); - -/* - * this must be called very early as the kernel might - * use some instruction that are emulated on the 060 - * and so we're prepared for early probe attempts (e.g. nf_init). - */ -void __init base_trap_init(void) -{ - if (MACH_IS_SUN3X) { - extern e_vector *sun3x_prom_vbr; - - __asm__ volatile ("movec %%vbr, %0" : "=r" (sun3x_prom_vbr)); - } - - /* setup the exception vector table */ - __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors)); - - if (CPU_IS_060) { - /* set up ISP entry points */ - asmlinkage void unimp_vec(void) asm ("_060_isp_unimp"); - - vectors[VEC_UNIMPII] = unimp_vec; - } - - vectors[VEC_BUSERR] = buserr; - vectors[VEC_ILLEGAL] = trap; - vectors[VEC_SYS] = system_call; -} - -void __init trap_init (void) -{ - int i; - - for (i = VEC_SPUR; i <= VEC_INT7; i++) - vectors[i] = bad_inthandler; - - for (i = 0; i < VEC_USER; i++) - if (!vectors[i]) - vectors[i] = trap; - - for (i = VEC_USER; i < 256; i++) - vectors[i] = bad_inthandler; - -#ifdef CONFIG_M68KFPU_EMU - if (FPU_IS_EMU) - vectors[VEC_LINE11] = fpu_emu; -#endif - - if (CPU_IS_040 && !FPU_IS_EMU) { - /* set up FPSP entry points */ - asmlinkage void dz_vec(void) asm ("dz"); - asmlinkage void inex_vec(void) asm ("inex"); - asmlinkage void ovfl_vec(void) asm ("ovfl"); - asmlinkage void unfl_vec(void) asm ("unfl"); - asmlinkage void snan_vec(void) asm ("snan"); - asmlinkage void operr_vec(void) asm ("operr"); - asmlinkage void bsun_vec(void) asm ("bsun"); - asmlinkage void fline_vec(void) asm ("fline"); - asmlinkage void unsupp_vec(void) asm ("unsupp"); - - vectors[VEC_FPDIVZ] = dz_vec; - vectors[VEC_FPIR] = inex_vec; - vectors[VEC_FPOVER] = ovfl_vec; - vectors[VEC_FPUNDER] = unfl_vec; - vectors[VEC_FPNAN] = snan_vec; - vectors[VEC_FPOE] = operr_vec; - vectors[VEC_FPBRUC] = bsun_vec; - vectors[VEC_LINE11] = fline_vec; - vectors[VEC_FPUNSUP] = unsupp_vec; - } - - if (CPU_IS_060 && !FPU_IS_EMU) { - /* set up IFPSP entry points */ - asmlinkage void snan_vec6(void) asm ("_060_fpsp_snan"); - asmlinkage void operr_vec6(void) asm ("_060_fpsp_operr"); - asmlinkage void ovfl_vec6(void) asm ("_060_fpsp_ovfl"); - asmlinkage void unfl_vec6(void) asm ("_060_fpsp_unfl"); - asmlinkage void dz_vec6(void) asm ("_060_fpsp_dz"); - asmlinkage void inex_vec6(void) asm ("_060_fpsp_inex"); - asmlinkage void fline_vec6(void) asm ("_060_fpsp_fline"); - asmlinkage void unsupp_vec6(void) asm ("_060_fpsp_unsupp"); - asmlinkage void effadd_vec6(void) asm ("_060_fpsp_effadd"); - - vectors[VEC_FPNAN] = snan_vec6; - vectors[VEC_FPOE] = operr_vec6; - vectors[VEC_FPOVER] = ovfl_vec6; - vectors[VEC_FPUNDER] = unfl_vec6; - vectors[VEC_FPDIVZ] = dz_vec6; - vectors[VEC_FPIR] = inex_vec6; - vectors[VEC_LINE11] = fline_vec6; - vectors[VEC_FPUNSUP] = unsupp_vec6; - vectors[VEC_UNIMPEA] = effadd_vec6; - } - - /* if running on an amiga, make the NMI interrupt do nothing */ - if (MACH_IS_AMIGA) { - vectors[VEC_INT7] = nmihandler; - } -} - - -static const char *vec_names[] = { - [VEC_RESETSP] = "RESET SP", - [VEC_RESETPC] = "RESET PC", - [VEC_BUSERR] = "BUS ERROR", - [VEC_ADDRERR] = "ADDRESS ERROR", - [VEC_ILLEGAL] = "ILLEGAL INSTRUCTION", - [VEC_ZERODIV] = "ZERO DIVIDE", - [VEC_CHK] = "CHK", - [VEC_TRAP] = "TRAPcc", - [VEC_PRIV] = "PRIVILEGE VIOLATION", - [VEC_TRACE] = "TRACE", - [VEC_LINE10] = "LINE 1010", - [VEC_LINE11] = "LINE 1111", - [VEC_RESV12] = "UNASSIGNED RESERVED 12", - [VEC_COPROC] = "COPROCESSOR PROTOCOL VIOLATION", - [VEC_FORMAT] = "FORMAT ERROR", - [VEC_UNINT] = "UNINITIALIZED INTERRUPT", - [VEC_RESV16] = "UNASSIGNED RESERVED 16", - [VEC_RESV17] = "UNASSIGNED RESERVED 17", - [VEC_RESV18] = "UNASSIGNED RESERVED 18", - [VEC_RESV19] = "UNASSIGNED RESERVED 19", - [VEC_RESV20] = "UNASSIGNED RESERVED 20", - [VEC_RESV21] = "UNASSIGNED RESERVED 21", - [VEC_RESV22] = "UNASSIGNED RESERVED 22", - [VEC_RESV23] = "UNASSIGNED RESERVED 23", - [VEC_SPUR] = "SPURIOUS INTERRUPT", - [VEC_INT1] = "LEVEL 1 INT", - [VEC_INT2] = "LEVEL 2 INT", - [VEC_INT3] = "LEVEL 3 INT", - [VEC_INT4] = "LEVEL 4 INT", - [VEC_INT5] = "LEVEL 5 INT", - [VEC_INT6] = "LEVEL 6 INT", - [VEC_INT7] = "LEVEL 7 INT", - [VEC_SYS] = "SYSCALL", - [VEC_TRAP1] = "TRAP #1", - [VEC_TRAP2] = "TRAP #2", - [VEC_TRAP3] = "TRAP #3", - [VEC_TRAP4] = "TRAP #4", - [VEC_TRAP5] = "TRAP #5", - [VEC_TRAP6] = "TRAP #6", - [VEC_TRAP7] = "TRAP #7", - [VEC_TRAP8] = "TRAP #8", - [VEC_TRAP9] = "TRAP #9", - [VEC_TRAP10] = "TRAP #10", - [VEC_TRAP11] = "TRAP #11", - [VEC_TRAP12] = "TRAP #12", - [VEC_TRAP13] = "TRAP #13", - [VEC_TRAP14] = "TRAP #14", - [VEC_TRAP15] = "TRAP #15", - [VEC_FPBRUC] = "FPCP BSUN", - [VEC_FPIR] = "FPCP INEXACT", - [VEC_FPDIVZ] = "FPCP DIV BY 0", - [VEC_FPUNDER] = "FPCP UNDERFLOW", - [VEC_FPOE] = "FPCP OPERAND ERROR", - [VEC_FPOVER] = "FPCP OVERFLOW", - [VEC_FPNAN] = "FPCP SNAN", - [VEC_FPUNSUP] = "FPCP UNSUPPORTED OPERATION", - [VEC_MMUCFG] = "MMU CONFIGURATION ERROR", - [VEC_MMUILL] = "MMU ILLEGAL OPERATION ERROR", - [VEC_MMUACC] = "MMU ACCESS LEVEL VIOLATION ERROR", - [VEC_RESV59] = "UNASSIGNED RESERVED 59", - [VEC_UNIMPEA] = "UNASSIGNED RESERVED 60", - [VEC_UNIMPII] = "UNASSIGNED RESERVED 61", - [VEC_RESV62] = "UNASSIGNED RESERVED 62", - [VEC_RESV63] = "UNASSIGNED RESERVED 63", -}; - -static const char *space_names[] = { - [0] = "Space 0", - [USER_DATA] = "User Data", - [USER_PROGRAM] = "User Program", -#ifndef CONFIG_SUN3 - [3] = "Space 3", -#else - [FC_CONTROL] = "Control", -#endif - [4] = "Space 4", - [SUPER_DATA] = "Super Data", - [SUPER_PROGRAM] = "Super Program", - [CPU_SPACE] = "CPU" -}; - -void die_if_kernel(char *,struct pt_regs *,int); -asmlinkage int do_page_fault(struct pt_regs *regs, unsigned long address, - unsigned long error_code); -int send_fault_sig(struct pt_regs *regs); - -asmlinkage void trap_c(struct frame *fp); - -#if defined (CONFIG_M68060) -static inline void access_error060 (struct frame *fp) -{ - unsigned long fslw = fp->un.fmt4.pc; /* is really FSLW for access error */ - -#ifdef DEBUG - printk("fslw=%#lx, fa=%#lx\n", fslw, fp->un.fmt4.effaddr); -#endif - - if (fslw & MMU060_BPE) { - /* branch prediction error -> clear branch cache */ - __asm__ __volatile__ ("movec %/cacr,%/d0\n\t" - "orl #0x00400000,%/d0\n\t" - "movec %/d0,%/cacr" - : : : "d0" ); - /* return if there's no other error */ - if (!(fslw & MMU060_ERR_BITS) && !(fslw & MMU060_SEE)) - return; - } - - if (fslw & (MMU060_DESC_ERR | MMU060_WP | MMU060_SP)) { - unsigned long errorcode; - unsigned long addr = fp->un.fmt4.effaddr; - - if (fslw & MMU060_MA) - addr = (addr + PAGE_SIZE - 1) & PAGE_MASK; - - errorcode = 1; - if (fslw & MMU060_DESC_ERR) { - __flush_tlb040_one(addr); - errorcode = 0; - } - if (fslw & MMU060_W) - errorcode |= 2; -#ifdef DEBUG - printk("errorcode = %d\n", errorcode ); -#endif - do_page_fault(&fp->ptregs, addr, errorcode); - } else if (fslw & (MMU060_SEE)){ - /* Software Emulation Error. - * fault during mem_read/mem_write in ifpsp060/os.S - */ - send_fault_sig(&fp->ptregs); - } else if (!(fslw & (MMU060_RE|MMU060_WE)) || - send_fault_sig(&fp->ptregs) > 0) { - printk("pc=%#lx, fa=%#lx\n", fp->ptregs.pc, fp->un.fmt4.effaddr); - printk( "68060 access error, fslw=%lx\n", fslw ); - trap_c( fp ); - } -} -#endif /* CONFIG_M68060 */ - -#if defined (CONFIG_M68040) -static inline unsigned long probe040(int iswrite, unsigned long addr, int wbs) -{ - unsigned long mmusr; - mm_segment_t old_fs = get_fs(); - - set_fs(MAKE_MM_SEG(wbs)); - - if (iswrite) - asm volatile (".chip 68040; ptestw (%0); .chip 68k" : : "a" (addr)); - else - asm volatile (".chip 68040; ptestr (%0); .chip 68k" : : "a" (addr)); - - asm volatile (".chip 68040; movec %%mmusr,%0; .chip 68k" : "=r" (mmusr)); - - set_fs(old_fs); - - return mmusr; -} - -static inline int do_040writeback1(unsigned short wbs, unsigned long wba, - unsigned long wbd) -{ - int res = 0; - mm_segment_t old_fs = get_fs(); - - /* set_fs can not be moved, otherwise put_user() may oops */ - set_fs(MAKE_MM_SEG(wbs)); - - switch (wbs & WBSIZ_040) { - case BA_SIZE_BYTE: - res = put_user(wbd & 0xff, (char __user *)wba); - break; - case BA_SIZE_WORD: - res = put_user(wbd & 0xffff, (short __user *)wba); - break; - case BA_SIZE_LONG: - res = put_user(wbd, (int __user *)wba); - break; - } - - /* set_fs can not be moved, otherwise put_user() may oops */ - set_fs(old_fs); - - -#ifdef DEBUG - printk("do_040writeback1, res=%d\n",res); -#endif - - return res; -} - -/* after an exception in a writeback the stack frame corresponding - * to that exception is discarded, set a few bits in the old frame - * to simulate what it should look like - */ -static inline void fix_xframe040(struct frame *fp, unsigned long wba, unsigned short wbs) -{ - fp->un.fmt7.faddr = wba; - fp->un.fmt7.ssw = wbs & 0xff; - if (wba != current->thread.faddr) - fp->un.fmt7.ssw |= MA_040; -} - -static inline void do_040writebacks(struct frame *fp) -{ - int res = 0; -#if 0 - if (fp->un.fmt7.wb1s & WBV_040) - printk("access_error040: cannot handle 1st writeback. oops.\n"); -#endif - - if ((fp->un.fmt7.wb2s & WBV_040) && - !(fp->un.fmt7.wb2s & WBTT_040)) { - res = do_040writeback1(fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, - fp->un.fmt7.wb2d); - if (res) - fix_xframe040(fp, fp->un.fmt7.wb2a, fp->un.fmt7.wb2s); - else - fp->un.fmt7.wb2s = 0; - } - - /* do the 2nd wb only if the first one was successful (except for a kernel wb) */ - if (fp->un.fmt7.wb3s & WBV_040 && (!res || fp->un.fmt7.wb3s & 4)) { - res = do_040writeback1(fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, - fp->un.fmt7.wb3d); - if (res) - { - fix_xframe040(fp, fp->un.fmt7.wb3a, fp->un.fmt7.wb3s); - - fp->un.fmt7.wb2s = fp->un.fmt7.wb3s; - fp->un.fmt7.wb3s &= (~WBV_040); - fp->un.fmt7.wb2a = fp->un.fmt7.wb3a; - fp->un.fmt7.wb2d = fp->un.fmt7.wb3d; - } - else - fp->un.fmt7.wb3s = 0; - } - - if (res) - send_fault_sig(&fp->ptregs); -} - -/* - * called from sigreturn(), must ensure userspace code didn't - * manipulate exception frame to circumvent protection, then complete - * pending writebacks - * we just clear TM2 to turn it into a userspace access - */ -asmlinkage void berr_040cleanup(struct frame *fp) -{ - fp->un.fmt7.wb2s &= ~4; - fp->un.fmt7.wb3s &= ~4; - - do_040writebacks(fp); -} - -static inline void access_error040(struct frame *fp) -{ - unsigned short ssw = fp->un.fmt7.ssw; - unsigned long mmusr; - -#ifdef DEBUG - printk("ssw=%#x, fa=%#lx\n", ssw, fp->un.fmt7.faddr); - printk("wb1s=%#x, wb2s=%#x, wb3s=%#x\n", fp->un.fmt7.wb1s, - fp->un.fmt7.wb2s, fp->un.fmt7.wb3s); - printk ("wb2a=%lx, wb3a=%lx, wb2d=%lx, wb3d=%lx\n", - fp->un.fmt7.wb2a, fp->un.fmt7.wb3a, - fp->un.fmt7.wb2d, fp->un.fmt7.wb3d); -#endif - - if (ssw & ATC_040) { - unsigned long addr = fp->un.fmt7.faddr; - unsigned long errorcode; - - /* - * The MMU status has to be determined AFTER the address - * has been corrected if there was a misaligned access (MA). - */ - if (ssw & MA_040) - addr = (addr + 7) & -8; - - /* MMU error, get the MMUSR info for this access */ - mmusr = probe040(!(ssw & RW_040), addr, ssw); -#ifdef DEBUG - printk("mmusr = %lx\n", mmusr); -#endif - errorcode = 1; - if (!(mmusr & MMU_R_040)) { - /* clear the invalid atc entry */ - __flush_tlb040_one(addr); - errorcode = 0; - } - - /* despite what documentation seems to say, RMW - * accesses have always both the LK and RW bits set */ - if (!(ssw & RW_040) || (ssw & LK_040)) - errorcode |= 2; - - if (do_page_fault(&fp->ptregs, addr, errorcode)) { -#ifdef DEBUG - printk("do_page_fault() !=0\n"); -#endif - if (user_mode(&fp->ptregs)){ - /* delay writebacks after signal delivery */ -#ifdef DEBUG - printk(".. was usermode - return\n"); -#endif - return; - } - /* disable writeback into user space from kernel - * (if do_page_fault didn't fix the mapping, - * the writeback won't do good) - */ -disable_wb: -#ifdef DEBUG - printk(".. disabling wb2\n"); -#endif - if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr) - fp->un.fmt7.wb2s &= ~WBV_040; - if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr) - fp->un.fmt7.wb3s &= ~WBV_040; - } - } else { - /* In case of a bus error we either kill the process or expect - * the kernel to catch the fault, which then is also responsible - * for cleaning up the mess. - */ - current->thread.signo = SIGBUS; - current->thread.faddr = fp->un.fmt7.faddr; - if (send_fault_sig(&fp->ptregs) >= 0) - printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw, - fp->un.fmt7.faddr); - goto disable_wb; - } - - do_040writebacks(fp); -} -#endif /* CONFIG_M68040 */ - -#if defined(CONFIG_SUN3) -#include <asm/sun3mmu.h> - -extern int mmu_emu_handle_fault (unsigned long, int, int); - -/* sun3 version of bus_error030 */ - -static inline void bus_error030 (struct frame *fp) -{ - unsigned char buserr_type = sun3_get_buserr (); - unsigned long addr, errorcode; - unsigned short ssw = fp->un.fmtb.ssw; - extern unsigned long _sun3_map_test_start, _sun3_map_test_end; - -#ifdef DEBUG - if (ssw & (FC | FB)) - printk ("Instruction fault at %#010lx\n", - ssw & FC ? - fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2 - : - fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr); - if (ssw & DF) - printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, - space_names[ssw & DFC], fp->ptregs.pc); -#endif - - /* - * Check if this page should be demand-mapped. This needs to go before - * the testing for a bad kernel-space access (demand-mapping applies - * to kernel accesses too). - */ - - if ((ssw & DF) - && (buserr_type & (SUN3_BUSERR_PROTERR | SUN3_BUSERR_INVALID))) { - if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 0)) - return; - } - - /* Check for kernel-space pagefault (BAD). */ - if (fp->ptregs.sr & PS_S) { - /* kernel fault must be a data fault to user space */ - if (! ((ssw & DF) && ((ssw & DFC) == USER_DATA))) { - // try checking the kernel mappings before surrender - if (mmu_emu_handle_fault (fp->un.fmtb.daddr, ssw & RW, 1)) - return; - /* instruction fault or kernel data fault! */ - if (ssw & (FC | FB)) - printk ("Instruction fault at %#010lx\n", - fp->ptregs.pc); - if (ssw & DF) { - /* was this fault incurred testing bus mappings? */ - if((fp->ptregs.pc >= (unsigned long)&_sun3_map_test_start) && - (fp->ptregs.pc <= (unsigned long)&_sun3_map_test_end)) { - send_fault_sig(&fp->ptregs); - return; - } - - printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, - space_names[ssw & DFC], fp->ptregs.pc); - } - printk ("BAD KERNEL BUSERR\n"); - - die_if_kernel("Oops", &fp->ptregs,0); - force_sig(SIGKILL, current); - return; - } - } else { - /* user fault */ - if (!(ssw & (FC | FB)) && !(ssw & DF)) - /* not an instruction fault or data fault! BAD */ - panic ("USER BUSERR w/o instruction or data fault"); - } - - - /* First handle the data fault, if any. */ - if (ssw & DF) { - addr = fp->un.fmtb.daddr; - -// errorcode bit 0: 0 -> no page 1 -> protection fault -// errorcode bit 1: 0 -> read fault 1 -> write fault - -// (buserr_type & SUN3_BUSERR_PROTERR) -> protection fault -// (buserr_type & SUN3_BUSERR_INVALID) -> invalid page fault - - if (buserr_type & SUN3_BUSERR_PROTERR) - errorcode = 0x01; - else if (buserr_type & SUN3_BUSERR_INVALID) - errorcode = 0x00; - else { -#ifdef DEBUG - printk ("*** unexpected busfault type=%#04x\n", buserr_type); - printk ("invalid %s access at %#lx from pc %#lx\n", - !(ssw & RW) ? "write" : "read", addr, - fp->ptregs.pc); -#endif - die_if_kernel ("Oops", &fp->ptregs, buserr_type); - force_sig (SIGBUS, current); - return; - } - -//todo: wtf is RM bit? --m - if (!(ssw & RW) || ssw & RM) - errorcode |= 0x02; - - /* Handle page fault. */ - do_page_fault (&fp->ptregs, addr, errorcode); - - /* Retry the data fault now. */ - return; - } - - /* Now handle the instruction fault. */ - - /* Get the fault address. */ - if (fp->ptregs.format == 0xA) - addr = fp->ptregs.pc + 4; - else - addr = fp->un.fmtb.baddr; - if (ssw & FC) - addr -= 2; - - if (buserr_type & SUN3_BUSERR_INVALID) { - if (!mmu_emu_handle_fault (fp->un.fmtb.daddr, 1, 0)) - do_page_fault (&fp->ptregs, addr, 0); - } else { -#ifdef DEBUG - printk ("protection fault on insn access (segv).\n"); -#endif - force_sig (SIGSEGV, current); - } -} -#else -#if defined(CPU_M68020_OR_M68030) -static inline void bus_error030 (struct frame *fp) -{ - volatile unsigned short temp; - unsigned short mmusr; - unsigned long addr, errorcode; - unsigned short ssw = fp->un.fmtb.ssw; -#ifdef DEBUG - unsigned long desc; - - printk ("pid = %x ", current->pid); - printk ("SSW=%#06x ", ssw); - - if (ssw & (FC | FB)) - printk ("Instruction fault at %#010lx\n", - ssw & FC ? - fp->ptregs.format == 0xa ? fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2 - : - fp->ptregs.format == 0xa ? fp->ptregs.pc + 4 : fp->un.fmtb.baddr); - if (ssw & DF) - printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, - space_names[ssw & DFC], fp->ptregs.pc); -#endif - - /* ++andreas: If a data fault and an instruction fault happen - at the same time map in both pages. */ - - /* First handle the data fault, if any. */ - if (ssw & DF) { - addr = fp->un.fmtb.daddr; - -#ifdef DEBUG - asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr), "d" (ssw)); -#else - asm volatile ("ptestr %2,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr), "d" (ssw)); -#endif - mmusr = temp; - -#ifdef DEBUG - printk("mmusr is %#x for addr %#lx in task %p\n", - mmusr, addr, current); - printk("descriptor address is %#lx, contents %#lx\n", - __va(desc), *(unsigned long *)__va(desc)); -#endif - - errorcode = (mmusr & MMU_I) ? 0 : 1; - if (!(ssw & RW) || (ssw & RM)) - errorcode |= 2; - - if (mmusr & (MMU_I | MMU_WP)) { - if (ssw & 4) { - printk("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, - space_names[ssw & DFC], fp->ptregs.pc); - goto buserr; - } - /* Don't try to do anything further if an exception was - handled. */ - if (do_page_fault (&fp->ptregs, addr, errorcode) < 0) - return; - } else if (!(mmusr & MMU_I)) { - /* probably a 020 cas fault */ - if (!(ssw & RM) && send_fault_sig(&fp->ptregs) > 0) - printk("unexpected bus error (%#x,%#x)\n", ssw, mmusr); - } else if (mmusr & (MMU_B|MMU_L|MMU_S)) { - printk("invalid %s access at %#lx from pc %#lx\n", - !(ssw & RW) ? "write" : "read", addr, - fp->ptregs.pc); - die_if_kernel("Oops",&fp->ptregs,mmusr); - force_sig(SIGSEGV, current); - return; - } else { -#if 0 - static volatile long tlong; -#endif - - printk("weird %s access at %#lx from pc %#lx (ssw is %#x)\n", - !(ssw & RW) ? "write" : "read", addr, - fp->ptregs.pc, ssw); - asm volatile ("ptestr #1,%1@,#0\n\t" - "pmove %%psr,%0@" - : /* no outputs */ - : "a" (&temp), "a" (addr)); - mmusr = temp; - - printk ("level 0 mmusr is %#x\n", mmusr); -#if 0 - asm volatile ("pmove %%tt0,%0@" - : /* no outputs */ - : "a" (&tlong)); - printk("tt0 is %#lx, ", tlong); - asm volatile ("pmove %%tt1,%0@" - : /* no outputs */ - : "a" (&tlong)); - printk("tt1 is %#lx\n", tlong); -#endif -#ifdef DEBUG - printk("Unknown SIGSEGV - 1\n"); -#endif - die_if_kernel("Oops",&fp->ptregs,mmusr); - force_sig(SIGSEGV, current); - return; - } - - /* setup an ATC entry for the access about to be retried */ - if (!(ssw & RW) || (ssw & RM)) - asm volatile ("ploadw %1,%0@" : /* no outputs */ - : "a" (addr), "d" (ssw)); - else - asm volatile ("ploadr %1,%0@" : /* no outputs */ - : "a" (addr), "d" (ssw)); - } - - /* Now handle the instruction fault. */ - - if (!(ssw & (FC|FB))) - return; - - if (fp->ptregs.sr & PS_S) { - printk("Instruction fault at %#010lx\n", - fp->ptregs.pc); - buserr: - printk ("BAD KERNEL BUSERR\n"); - die_if_kernel("Oops",&fp->ptregs,0); - force_sig(SIGKILL, current); - return; - } - - /* get the fault address */ - if (fp->ptregs.format == 10) - addr = fp->ptregs.pc + 4; - else - addr = fp->un.fmtb.baddr; - if (ssw & FC) - addr -= 2; - - if ((ssw & DF) && ((addr ^ fp->un.fmtb.daddr) & PAGE_MASK) == 0) - /* Insn fault on same page as data fault. But we - should still create the ATC entry. */ - goto create_atc_entry; - -#ifdef DEBUG - asm volatile ("ptestr #1,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr)); -#else - asm volatile ("ptestr #1,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr)); -#endif - mmusr = temp; - -#ifdef DEBUG - printk ("mmusr is %#x for addr %#lx in task %p\n", - mmusr, addr, current); - printk ("descriptor address is %#lx, contents %#lx\n", - __va(desc), *(unsigned long *)__va(desc)); -#endif - - if (mmusr & MMU_I) - do_page_fault (&fp->ptregs, addr, 0); - else if (mmusr & (MMU_B|MMU_L|MMU_S)) { - printk ("invalid insn access at %#lx from pc %#lx\n", - addr, fp->ptregs.pc); -#ifdef DEBUG - printk("Unknown SIGSEGV - 2\n"); -#endif - die_if_kernel("Oops",&fp->ptregs,mmusr); - force_sig(SIGSEGV, current); - return; - } - -create_atc_entry: - /* setup an ATC entry for the access about to be retried */ - asm volatile ("ploadr #2,%0@" : /* no outputs */ - : "a" (addr)); -} -#endif /* CPU_M68020_OR_M68030 */ -#endif /* !CONFIG_SUN3 */ - -asmlinkage void buserr_c(struct frame *fp) -{ - /* Only set esp0 if coming from user mode */ - if (user_mode(&fp->ptregs)) - current->thread.esp0 = (unsigned long) fp; - -#ifdef DEBUG - printk ("*** Bus Error *** Format is %x\n", fp->ptregs.format); -#endif - - switch (fp->ptregs.format) { -#if defined (CONFIG_M68060) - case 4: /* 68060 access error */ - access_error060 (fp); - break; -#endif -#if defined (CONFIG_M68040) - case 0x7: /* 68040 access error */ - access_error040 (fp); - break; -#endif -#if defined (CPU_M68020_OR_M68030) - case 0xa: - case 0xb: - bus_error030 (fp); - break; -#endif - default: - die_if_kernel("bad frame format",&fp->ptregs,0); -#ifdef DEBUG - printk("Unknown SIGSEGV - 4\n"); -#endif - force_sig(SIGSEGV, current); - } -} - - -static int kstack_depth_to_print = 48; - -void show_trace(unsigned long *stack) -{ - unsigned long *endstack; - unsigned long addr; - int i; - - printk("Call Trace:"); - addr = (unsigned long)stack + THREAD_SIZE - 1; - endstack = (unsigned long *)(addr & -THREAD_SIZE); - i = 0; - while (stack + 1 <= endstack) { - addr = *stack++; - /* - * If the address is either in the text segment of the - * kernel, or in the region which contains vmalloc'ed - * memory, it *may* be the address of a calling - * routine; if so, print it so that someone tracing - * down the cause of the crash will be able to figure - * out the call path that was taken. - */ - if (__kernel_text_address(addr)) { -#ifndef CONFIG_KALLSYMS - if (i % 5 == 0) - printk("\n "); -#endif - printk(" [<%08lx>] %pS\n", addr, (void *)addr); - i++; - } - } - printk("\n"); -} - -void show_registers(struct pt_regs *regs) -{ - struct frame *fp = (struct frame *)regs; - mm_segment_t old_fs = get_fs(); - u16 c, *cp; - unsigned long addr; - int i; - - print_modules(); - printk("PC: [<%08lx>] %pS\n", regs->pc, (void *)regs->pc); - printk("SR: %04x SP: %p a2: %08lx\n", regs->sr, regs, regs->a2); - printk("d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", - regs->d0, regs->d1, regs->d2, regs->d3); - printk("d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", - regs->d4, regs->d5, regs->a0, regs->a1); - - printk("Process %s (pid: %d, task=%p)\n", - current->comm, task_pid_nr(current), current); - addr = (unsigned long)&fp->un; - printk("Frame format=%X ", regs->format); - switch (regs->format) { - case 0x2: - printk("instr addr=%08lx\n", fp->un.fmt2.iaddr); - addr += sizeof(fp->un.fmt2); - break; - case 0x3: - printk("eff addr=%08lx\n", fp->un.fmt3.effaddr); - addr += sizeof(fp->un.fmt3); - break; - case 0x4: - printk((CPU_IS_060 ? "fault addr=%08lx fslw=%08lx\n" - : "eff addr=%08lx pc=%08lx\n"), - fp->un.fmt4.effaddr, fp->un.fmt4.pc); - addr += sizeof(fp->un.fmt4); - break; - case 0x7: - printk("eff addr=%08lx ssw=%04x faddr=%08lx\n", - fp->un.fmt7.effaddr, fp->un.fmt7.ssw, fp->un.fmt7.faddr); - printk("wb 1 stat/addr/data: %04x %08lx %08lx\n", - fp->un.fmt7.wb1s, fp->un.fmt7.wb1a, fp->un.fmt7.wb1dpd0); - printk("wb 2 stat/addr/data: %04x %08lx %08lx\n", - fp->un.fmt7.wb2s, fp->un.fmt7.wb2a, fp->un.fmt7.wb2d); - printk("wb 3 stat/addr/data: %04x %08lx %08lx\n", - fp->un.fmt7.wb3s, fp->un.fmt7.wb3a, fp->un.fmt7.wb3d); - printk("push data: %08lx %08lx %08lx %08lx\n", - fp->un.fmt7.wb1dpd0, fp->un.fmt7.pd1, fp->un.fmt7.pd2, - fp->un.fmt7.pd3); - addr += sizeof(fp->un.fmt7); - break; - case 0x9: - printk("instr addr=%08lx\n", fp->un.fmt9.iaddr); - addr += sizeof(fp->un.fmt9); - break; - case 0xa: - printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n", - fp->un.fmta.ssw, fp->un.fmta.isc, fp->un.fmta.isb, - fp->un.fmta.daddr, fp->un.fmta.dobuf); - addr += sizeof(fp->un.fmta); - break; - case 0xb: - printk("ssw=%04x isc=%04x isb=%04x daddr=%08lx dobuf=%08lx\n", - fp->un.fmtb.ssw, fp->un.fmtb.isc, fp->un.fmtb.isb, - fp->un.fmtb.daddr, fp->un.fmtb.dobuf); - printk("baddr=%08lx dibuf=%08lx ver=%x\n", - fp->un.fmtb.baddr, fp->un.fmtb.dibuf, fp->un.fmtb.ver); - addr += sizeof(fp->un.fmtb); - break; - default: - printk("\n"); - } - show_stack(NULL, (unsigned long *)addr); - - printk("Code:"); - set_fs(KERNEL_DS); - cp = (u16 *)regs->pc; - for (i = -8; i < 16; i++) { - if (get_user(c, cp + i) && i >= 0) { - printk(" Bad PC value."); - break; - } - printk(i ? " %04x" : " <%04x>", c); - } - set_fs(old_fs); - printk ("\n"); -} - -void show_stack(struct task_struct *task, unsigned long *stack) -{ - unsigned long *p; - unsigned long *endstack; - int i; - - if (!stack) { - if (task) - stack = (unsigned long *)task->thread.esp0; - else - stack = (unsigned long *)&stack; - } - endstack = (unsigned long *)(((unsigned long)stack + THREAD_SIZE - 1) & -THREAD_SIZE); - - printk("Stack from %08lx:", (unsigned long)stack); - p = stack; - for (i = 0; i < kstack_depth_to_print; i++) { - if (p + 1 > endstack) - break; - if (i % 8 == 0) - printk("\n "); - printk(" %08lx", *p++); - } - printk("\n"); - show_trace(stack); -} - -/* - * The architecture-independent backtrace generator - */ -void dump_stack(void) -{ - unsigned long stack; - - show_trace(&stack); -} - -EXPORT_SYMBOL(dump_stack); - -void bad_super_trap (struct frame *fp) -{ - console_verbose(); - if (fp->ptregs.vector < 4 * ARRAY_SIZE(vec_names)) - printk ("*** %s *** FORMAT=%X\n", - vec_names[(fp->ptregs.vector) >> 2], - fp->ptregs.format); - else - printk ("*** Exception %d *** FORMAT=%X\n", - (fp->ptregs.vector) >> 2, - fp->ptregs.format); - if (fp->ptregs.vector >> 2 == VEC_ADDRERR && CPU_IS_020_OR_030) { - unsigned short ssw = fp->un.fmtb.ssw; - - printk ("SSW=%#06x ", ssw); - - if (ssw & RC) - printk ("Pipe stage C instruction fault at %#010lx\n", - (fp->ptregs.format) == 0xA ? - fp->ptregs.pc + 2 : fp->un.fmtb.baddr - 2); - if (ssw & RB) - printk ("Pipe stage B instruction fault at %#010lx\n", - (fp->ptregs.format) == 0xA ? - fp->ptregs.pc + 4 : fp->un.fmtb.baddr); - if (ssw & DF) - printk ("Data %s fault at %#010lx in %s (pc=%#lx)\n", - ssw & RW ? "read" : "write", - fp->un.fmtb.daddr, space_names[ssw & DFC], - fp->ptregs.pc); - } - printk ("Current process id is %d\n", task_pid_nr(current)); - die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0); -} - -asmlinkage void trap_c(struct frame *fp) -{ - int sig; - siginfo_t info; - - if (fp->ptregs.sr & PS_S) { - if (fp->ptregs.vector == VEC_TRACE << 2) { - /* traced a trapping instruction on a 68020/30, - * real exception will be executed afterwards. - */ - } else if (!handle_kernel_fault(&fp->ptregs)) - bad_super_trap(fp); - return; - } - - /* send the appropriate signal to the user program */ - switch ((fp->ptregs.vector) >> 2) { - case VEC_ADDRERR: - info.si_code = BUS_ADRALN; - sig = SIGBUS; - break; - case VEC_ILLEGAL: - case VEC_LINE10: - case VEC_LINE11: - info.si_code = ILL_ILLOPC; - sig = SIGILL; - break; - case VEC_PRIV: - info.si_code = ILL_PRVOPC; - sig = SIGILL; - break; - case VEC_COPROC: - info.si_code = ILL_COPROC; - sig = SIGILL; - break; - case VEC_TRAP1: - case VEC_TRAP2: - case VEC_TRAP3: - case VEC_TRAP4: - case VEC_TRAP5: - case VEC_TRAP6: - case VEC_TRAP7: - case VEC_TRAP8: - case VEC_TRAP9: - case VEC_TRAP10: - case VEC_TRAP11: - case VEC_TRAP12: - case VEC_TRAP13: - case VEC_TRAP14: - info.si_code = ILL_ILLTRP; - sig = SIGILL; - break; - case VEC_FPBRUC: - case VEC_FPOE: - case VEC_FPNAN: - info.si_code = FPE_FLTINV; - sig = SIGFPE; - break; - case VEC_FPIR: - info.si_code = FPE_FLTRES; - sig = SIGFPE; - break; - case VEC_FPDIVZ: - info.si_code = FPE_FLTDIV; - sig = SIGFPE; - break; - case VEC_FPUNDER: - info.si_code = FPE_FLTUND; - sig = SIGFPE; - break; - case VEC_FPOVER: - info.si_code = FPE_FLTOVF; - sig = SIGFPE; - break; - case VEC_ZERODIV: - info.si_code = FPE_INTDIV; - sig = SIGFPE; - break; - case VEC_CHK: - case VEC_TRAP: - info.si_code = FPE_INTOVF; - sig = SIGFPE; - break; - case VEC_TRACE: /* ptrace single step */ - info.si_code = TRAP_TRACE; - sig = SIGTRAP; - break; - case VEC_TRAP15: /* breakpoint */ - info.si_code = TRAP_BRKPT; - sig = SIGTRAP; - break; - default: - info.si_code = ILL_ILLOPC; - sig = SIGILL; - break; - } - info.si_signo = sig; - info.si_errno = 0; - switch (fp->ptregs.format) { - default: - info.si_addr = (void *) fp->ptregs.pc; - break; - case 2: - info.si_addr = (void *) fp->un.fmt2.iaddr; - break; - case 7: - info.si_addr = (void *) fp->un.fmt7.effaddr; - break; - case 9: - info.si_addr = (void *) fp->un.fmt9.iaddr; - break; - case 10: - info.si_addr = (void *) fp->un.fmta.daddr; - break; - case 11: - info.si_addr = (void *) fp->un.fmtb.daddr; - break; - } - force_sig_info (sig, &info, current); -} - -void die_if_kernel (char *str, struct pt_regs *fp, int nr) -{ - if (!(fp->sr & PS_S)) - return; - - console_verbose(); - printk("%s: %08x\n",str,nr); - show_registers(fp); - add_taint(TAINT_DIE); - do_exit(SIGSEGV); -} - -/* - * This function is called if an error occur while accessing - * user-space from the fpsp040 code. - */ -asmlinkage void fpsp040_die(void) -{ - do_exit(SIGSEGV); -} - -#ifdef CONFIG_M68KFPU_EMU -asmlinkage void fpemu_signal(int signal, int code, void *addr) -{ - siginfo_t info; - - info.si_signo = signal; - info.si_errno = 0; - info.si_code = code; - info.si_addr = addr; - force_sig_info(signal, &info, current); -} -#endif diff --git a/arch/m68k/kernel/traps_no.c b/arch/m68k/kernel/traps_no.c deleted file mode 100644 index e67b8c806959..000000000000 --- a/arch/m68k/kernel/traps_no.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * linux/arch/m68knommu/kernel/traps.c - * - * Copyright (C) 1993, 1994 by Hamish Macdonald - * - * 68040 fixes by Michael Rausch - * 68040 fixes by Martin Apel - * 68060 fixes by Roman Hodek - * 68060 fixes by Jesper Skov - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - -/* - * Sets up all exception vectors - */ -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/user.h> -#include <linux/string.h> -#include <linux/linkage.h> -#include <linux/init.h> -#include <linux/ptrace.h> -#include <linux/kallsyms.h> - -#include <asm/setup.h> -#include <asm/fpu.h> -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/traps.h> -#include <asm/pgtable.h> -#include <asm/machdep.h> -#include <asm/siginfo.h> - -static char const * const vec_names[] = { - "RESET SP", "RESET PC", "BUS ERROR", "ADDRESS ERROR", - "ILLEGAL INSTRUCTION", "ZERO DIVIDE", "CHK", "TRAPcc", - "PRIVILEGE VIOLATION", "TRACE", "LINE 1010", "LINE 1111", - "UNASSIGNED RESERVED 12", "COPROCESSOR PROTOCOL VIOLATION", - "FORMAT ERROR", "UNINITIALIZED INTERRUPT", - "UNASSIGNED RESERVED 16", "UNASSIGNED RESERVED 17", - "UNASSIGNED RESERVED 18", "UNASSIGNED RESERVED 19", - "UNASSIGNED RESERVED 20", "UNASSIGNED RESERVED 21", - "UNASSIGNED RESERVED 22", "UNASSIGNED RESERVED 23", - "SPURIOUS INTERRUPT", "LEVEL 1 INT", "LEVEL 2 INT", "LEVEL 3 INT", - "LEVEL 4 INT", "LEVEL 5 INT", "LEVEL 6 INT", "LEVEL 7 INT", - "SYSCALL", "TRAP #1", "TRAP #2", "TRAP #3", - "TRAP #4", "TRAP #5", "TRAP #6", "TRAP #7", - "TRAP #8", "TRAP #9", "TRAP #10", "TRAP #11", - "TRAP #12", "TRAP #13", "TRAP #14", "TRAP #15", - "FPCP BSUN", "FPCP INEXACT", "FPCP DIV BY 0", "FPCP UNDERFLOW", - "FPCP OPERAND ERROR", "FPCP OVERFLOW", "FPCP SNAN", - "FPCP UNSUPPORTED OPERATION", - "MMU CONFIGURATION ERROR" -}; - -void die_if_kernel(char *str, struct pt_regs *fp, int nr) -{ - if (!(fp->sr & PS_S)) - return; - - console_verbose(); - printk(KERN_EMERG "%s: %08x\n",str,nr); - printk(KERN_EMERG "PC: [<%08lx>]\nSR: %04x SP: %p a2: %08lx\n", - fp->pc, fp->sr, fp, fp->a2); - printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n", - fp->d0, fp->d1, fp->d2, fp->d3); - printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n", - fp->d4, fp->d5, fp->a0, fp->a1); - - printk(KERN_EMERG "Process %s (pid: %d, stackpage=%08lx)\n", - current->comm, current->pid, PAGE_SIZE+(unsigned long)current); - show_stack(NULL, (unsigned long *)(fp + 1)); - add_taint(TAINT_DIE); - do_exit(SIGSEGV); -} - -asmlinkage void buserr_c(struct frame *fp) -{ - /* Only set esp0 if coming from user mode */ - if (user_mode(&fp->ptregs)) - current->thread.esp0 = (unsigned long) fp; - -#if defined(DEBUG) - printk (KERN_DEBUG "*** Bus Error *** Format is %x\n", fp->ptregs.format); -#endif - - die_if_kernel("bad frame format",&fp->ptregs,0); -#if defined(DEBUG) - printk(KERN_DEBUG "Unknown SIGSEGV - 4\n"); -#endif - force_sig(SIGSEGV, current); -} - -static void print_this_address(unsigned long addr, int i) -{ -#ifdef CONFIG_KALLSYMS - printk(KERN_EMERG " [%08lx] ", addr); - print_symbol(KERN_CONT "%s\n", addr); -#else - if (i % 5) - printk(KERN_CONT " [%08lx] ", addr); - else - printk(KERN_EMERG " [%08lx] ", addr); - i++; -#endif -} - -int kstack_depth_to_print = 48; - -static void __show_stack(struct task_struct *task, unsigned long *stack) -{ - unsigned long *endstack, addr; -#ifdef CONFIG_FRAME_POINTER - unsigned long *last_stack; -#endif - int i; - - if (!stack) - stack = (unsigned long *)task->thread.ksp; - - addr = (unsigned long) stack; - endstack = (unsigned long *) PAGE_ALIGN(addr); - - printk(KERN_EMERG "Stack from %08lx:", (unsigned long)stack); - for (i = 0; i < kstack_depth_to_print; i++) { - if (stack + 1 + i > endstack) - break; - if (i % 8 == 0) - printk(KERN_EMERG " "); - printk(KERN_CONT " %08lx", *(stack + i)); - } - printk("\n"); - i = 0; - -#ifdef CONFIG_FRAME_POINTER - printk(KERN_EMERG "Call Trace:\n"); - - last_stack = stack - 1; - while (stack <= endstack && stack > last_stack) { - - addr = *(stack + 1); - print_this_address(addr, i); - i++; - - last_stack = stack; - stack = (unsigned long *)*stack; - } - printk("\n"); -#else - printk(KERN_EMERG "Call Trace with CONFIG_FRAME_POINTER disabled:\n"); - while (stack <= endstack) { - addr = *stack++; - /* - * If the address is either in the text segment of the kernel, - * or in a region which is occupied by a module then it *may* - * be the address of a calling routine; if so, print it so that - * someone tracing down the cause of the crash will be able to - * figure out the call path that was taken. - */ - if (__kernel_text_address(addr)) { - print_this_address(addr, i); - i++; - } - } - printk(KERN_CONT "\n"); -#endif -} - -void bad_super_trap(struct frame *fp) -{ - int vector = (fp->ptregs.vector >> 2) & 0xff; - - console_verbose(); - if (vector < ARRAY_SIZE(vec_names)) - printk (KERN_WARNING "*** %s *** FORMAT=%X\n", - vec_names[vector], - fp->ptregs.format); - else - printk (KERN_WARNING "*** Exception %d *** FORMAT=%X\n", - vector, - fp->ptregs.format); - printk (KERN_WARNING "Current process id is %d\n", current->pid); - die_if_kernel("BAD KERNEL TRAP", &fp->ptregs, 0); -} - -asmlinkage void trap_c(struct frame *fp) -{ - int sig; - int vector = (fp->ptregs.vector >> 2) & 0xff; - siginfo_t info; - - if (fp->ptregs.sr & PS_S) { - if (vector == VEC_TRACE) { - /* traced a trapping instruction */ - } else - bad_super_trap(fp); - return; - } - - /* send the appropriate signal to the user program */ - switch (vector) { - case VEC_ADDRERR: - info.si_code = BUS_ADRALN; - sig = SIGBUS; - break; - case VEC_ILLEGAL: - case VEC_LINE10: - case VEC_LINE11: - info.si_code = ILL_ILLOPC; - sig = SIGILL; - break; - case VEC_PRIV: - info.si_code = ILL_PRVOPC; - sig = SIGILL; - break; - case VEC_COPROC: - info.si_code = ILL_COPROC; - sig = SIGILL; - break; - case VEC_TRAP1: /* gdbserver breakpoint */ - fp->ptregs.pc -= 2; - info.si_code = TRAP_TRACE; - sig = SIGTRAP; - break; - case VEC_TRAP2: - case VEC_TRAP3: - case VEC_TRAP4: - case VEC_TRAP5: - case VEC_TRAP6: - case VEC_TRAP7: - case VEC_TRAP8: - case VEC_TRAP9: - case VEC_TRAP10: - case VEC_TRAP11: - case VEC_TRAP12: - case VEC_TRAP13: - case VEC_TRAP14: - info.si_code = ILL_ILLTRP; - sig = SIGILL; - break; - case VEC_FPBRUC: - case VEC_FPOE: - case VEC_FPNAN: - info.si_code = FPE_FLTINV; - sig = SIGFPE; - break; - case VEC_FPIR: - info.si_code = FPE_FLTRES; - sig = SIGFPE; - break; - case VEC_FPDIVZ: - info.si_code = FPE_FLTDIV; - sig = SIGFPE; - break; - case VEC_FPUNDER: - info.si_code = FPE_FLTUND; - sig = SIGFPE; - break; - case VEC_FPOVER: - info.si_code = FPE_FLTOVF; - sig = SIGFPE; - break; - case VEC_ZERODIV: - info.si_code = FPE_INTDIV; - sig = SIGFPE; - break; - case VEC_CHK: - case VEC_TRAP: - info.si_code = FPE_INTOVF; - sig = SIGFPE; - break; - case VEC_TRACE: /* ptrace single step */ - info.si_code = TRAP_TRACE; - sig = SIGTRAP; - break; - case VEC_TRAP15: /* breakpoint */ - info.si_code = TRAP_BRKPT; - sig = SIGTRAP; - break; - default: - info.si_code = ILL_ILLOPC; - sig = SIGILL; - break; - } - info.si_signo = sig; - info.si_errno = 0; - switch (fp->ptregs.format) { - default: - info.si_addr = (void *) fp->ptregs.pc; - break; - case 2: - info.si_addr = (void *) fp->un.fmt2.iaddr; - break; - case 7: - info.si_addr = (void *) fp->un.fmt7.effaddr; - break; - case 9: - info.si_addr = (void *) fp->un.fmt9.iaddr; - break; - case 10: - info.si_addr = (void *) fp->un.fmta.daddr; - break; - case 11: - info.si_addr = (void *) fp->un.fmtb.daddr; - break; - } - force_sig_info (sig, &info, current); -} - -asmlinkage void set_esp0(unsigned long ssp) -{ - current->thread.esp0 = ssp; -} - -/* - * The architecture-independent backtrace generator - */ -void dump_stack(void) -{ - /* - * We need frame pointers for this little trick, which works as follows: - * - * +------------+ 0x00 - * | Next SP | -> 0x0c - * +------------+ 0x04 - * | Caller | - * +------------+ 0x08 - * | Local vars | -> our stack var - * +------------+ 0x0c - * | Next SP | -> 0x18, that is what we pass to show_stack() - * +------------+ 0x10 - * | Caller | - * +------------+ 0x14 - * | Local vars | - * +------------+ 0x18 - * | ... | - * +------------+ - */ - - unsigned long *stack; - - stack = (unsigned long *)&stack; - stack++; - __show_stack(current, stack); -} -EXPORT_SYMBOL(dump_stack); - -void show_stack(struct task_struct *task, unsigned long *stack) -{ - if (!stack && !task) - dump_stack(); - else - __show_stack(task, stack); -} diff --git a/arch/m68k/kernel/vectors.c b/arch/m68k/kernel/vectors.c new file mode 100644 index 000000000000..147b03fbc71e --- /dev/null +++ b/arch/m68k/kernel/vectors.c @@ -0,0 +1,145 @@ +/* + * vectors.c + * + * Copyright (C) 1993, 1994 by Hamish Macdonald + * + * 68040 fixes by Michael Rausch + * 68040 fixes by Martin Apel + * 68040 fixes and writeback by Richard Zidlicky + * 68060 fixes by Roman Hodek + * 68060 fixes by Jesper Skov + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +/* + * Sets up all exception vectors + */ +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/linkage.h> +#include <linux/init.h> +#include <linux/kallsyms.h> + +#include <asm/setup.h> +#include <asm/fpu.h> +#include <asm/system.h> +#include <asm/traps.h> + +/* assembler routines */ +asmlinkage void system_call(void); +asmlinkage void buserr(void); +asmlinkage void trap(void); +asmlinkage void nmihandler(void); +#ifdef CONFIG_M68KFPU_EMU +asmlinkage void fpu_emu(void); +#endif + +e_vector vectors[256]; + +/* nmi handler for the Amiga */ +asm(".text\n" + __ALIGN_STR "\n" + "nmihandler: rte"); + +/* + * this must be called very early as the kernel might + * use some instruction that are emulated on the 060 + * and so we're prepared for early probe attempts (e.g. nf_init). + */ +void __init base_trap_init(void) +{ + if (MACH_IS_SUN3X) { + extern e_vector *sun3x_prom_vbr; + + __asm__ volatile ("movec %%vbr, %0" : "=r" (sun3x_prom_vbr)); + } + + /* setup the exception vector table */ + __asm__ volatile ("movec %0,%%vbr" : : "r" ((void*)vectors)); + + if (CPU_IS_060) { + /* set up ISP entry points */ + asmlinkage void unimp_vec(void) asm ("_060_isp_unimp"); + + vectors[VEC_UNIMPII] = unimp_vec; + } + + vectors[VEC_BUSERR] = buserr; + vectors[VEC_ILLEGAL] = trap; + vectors[VEC_SYS] = system_call; +} + +void __init trap_init (void) +{ + int i; + + for (i = VEC_SPUR; i <= VEC_INT7; i++) + vectors[i] = bad_inthandler; + + for (i = 0; i < VEC_USER; i++) + if (!vectors[i]) + vectors[i] = trap; + + for (i = VEC_USER; i < 256; i++) + vectors[i] = bad_inthandler; + +#ifdef CONFIG_M68KFPU_EMU + if (FPU_IS_EMU) + vectors[VEC_LINE11] = fpu_emu; +#endif + + if (CPU_IS_040 && !FPU_IS_EMU) { + /* set up FPSP entry points */ + asmlinkage void dz_vec(void) asm ("dz"); + asmlinkage void inex_vec(void) asm ("inex"); + asmlinkage void ovfl_vec(void) asm ("ovfl"); + asmlinkage void unfl_vec(void) asm ("unfl"); + asmlinkage void snan_vec(void) asm ("snan"); + asmlinkage void operr_vec(void) asm ("operr"); + asmlinkage void bsun_vec(void) asm ("bsun"); + asmlinkage void fline_vec(void) asm ("fline"); + asmlinkage void unsupp_vec(void) asm ("unsupp"); + + vectors[VEC_FPDIVZ] = dz_vec; + vectors[VEC_FPIR] = inex_vec; + vectors[VEC_FPOVER] = ovfl_vec; + vectors[VEC_FPUNDER] = unfl_vec; + vectors[VEC_FPNAN] = snan_vec; + vectors[VEC_FPOE] = operr_vec; + vectors[VEC_FPBRUC] = bsun_vec; + vectors[VEC_LINE11] = fline_vec; + vectors[VEC_FPUNSUP] = unsupp_vec; + } + + if (CPU_IS_060 && !FPU_IS_EMU) { + /* set up IFPSP entry points */ + asmlinkage void snan_vec6(void) asm ("_060_fpsp_snan"); + asmlinkage void operr_vec6(void) asm ("_060_fpsp_operr"); + asmlinkage void ovfl_vec6(void) asm ("_060_fpsp_ovfl"); + asmlinkage void unfl_vec6(void) asm ("_060_fpsp_unfl"); + asmlinkage void dz_vec6(void) asm ("_060_fpsp_dz"); + asmlinkage void inex_vec6(void) asm ("_060_fpsp_inex"); + asmlinkage void fline_vec6(void) asm ("_060_fpsp_fline"); + asmlinkage void unsupp_vec6(void) asm ("_060_fpsp_unsupp"); + asmlinkage void effadd_vec6(void) asm ("_060_fpsp_effadd"); + + vectors[VEC_FPNAN] = snan_vec6; + vectors[VEC_FPOE] = operr_vec6; + vectors[VEC_FPOVER] = ovfl_vec6; + vectors[VEC_FPUNDER] = unfl_vec6; + vectors[VEC_FPDIVZ] = dz_vec6; + vectors[VEC_FPIR] = inex_vec6; + vectors[VEC_LINE11] = fline_vec6; + vectors[VEC_FPUNSUP] = unsupp_vec6; + vectors[VEC_UNIMPEA] = effadd_vec6; + } + + /* if running on an amiga, make the NMI interrupt do nothing */ + if (MACH_IS_AMIGA) { + vectors[VEC_INT7] = nmihandler; + } +} + diff --git a/arch/m68k/kernel/vmlinux.lds_no.S b/arch/m68k/kernel/vmlinux.lds_no.S index 7dc4087a9545..4e2389340837 100644 --- a/arch/m68k/kernel/vmlinux.lds_no.S +++ b/arch/m68k/kernel/vmlinux.lds_no.S @@ -77,7 +77,6 @@ SECTIONS { *(.rodata) *(.rodata.*) *(__vermagic) /* Kernel version magic */ - *(__markers_strings) *(.rodata1) *(.rodata.str1.1) diff --git a/arch/m68k/lib/memcpy.c b/arch/m68k/lib/memcpy.c index 064889316974..10ca051d56b8 100644 --- a/arch/m68k/lib/memcpy.c +++ b/arch/m68k/lib/memcpy.c @@ -22,6 +22,15 @@ void *memcpy(void *to, const void *from, size_t n) from = cfrom; n--; } +#if defined(CONFIG_M68000) + if ((long)from & 1) { + char *cto = to; + const char *cfrom = from; + for (; n; n--) + *cto++ = *cfrom++; + return xto; + } +#endif if (n > 2 && (long)to & 2) { short *sto = to; const short *sfrom = from; diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c index 900d899f3323..f92190c159b4 100644 --- a/arch/m68k/mac/macints.c +++ b/arch/m68k/mac/macints.c @@ -370,7 +370,7 @@ int mac_irq_pending(unsigned int irq) break; case 4: if (psc_present) - psc_irq_pending(irq); + return psc_irq_pending(irq); break; } return 0; diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c index e023fc6b37e5..eb915551de69 100644 --- a/arch/m68k/mac/misc.c +++ b/arch/m68k/mac/misc.c @@ -304,35 +304,41 @@ static void via_write_pram(int offset, __u8 data) static long via_read_time(void) { union { - __u8 cdata[4]; - long idata; + __u8 cdata[4]; + long idata; } result, last_result; - int ct; + int count = 1; + + via_pram_command(0x81, &last_result.cdata[3]); + via_pram_command(0x85, &last_result.cdata[2]); + via_pram_command(0x89, &last_result.cdata[1]); + via_pram_command(0x8D, &last_result.cdata[0]); /* * The NetBSD guys say to loop until you get the same reading * twice in a row. */ - ct = 0; - do { - if (++ct > 10) { - printk("via_read_time: couldn't get valid time, " - "last read = 0x%08lx and 0x%08lx\n", - last_result.idata, result.idata); - break; - } - - last_result.idata = result.idata; - result.idata = 0; - + while (1) { via_pram_command(0x81, &result.cdata[3]); via_pram_command(0x85, &result.cdata[2]); via_pram_command(0x89, &result.cdata[1]); via_pram_command(0x8D, &result.cdata[0]); - } while (result.idata != last_result.idata); - return result.idata - RTC_OFFSET; + if (result.idata == last_result.idata) + return result.idata - RTC_OFFSET; + + if (++count > 10) + break; + + last_result.idata = result.idata; + } + + pr_err("via_read_time: failed to read a stable value; " + "got 0x%08lx then 0x%08lx\n", + last_result.idata, result.idata); + + return 0; } /* diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c index 50cd12cf28d9..1e33d39ca9a0 100644 --- a/arch/m68k/mm/init_no.c +++ b/arch/m68k/mm/init_no.c @@ -32,6 +32,7 @@ #include <linux/gfp.h> #include <asm/setup.h> +#include <asm/sections.h> #include <asm/segment.h> #include <asm/page.h> #include <asm/pgtable.h> @@ -44,9 +45,6 @@ */ void *empty_zero_page; -extern unsigned long memory_start; -extern unsigned long memory_end; - /* * paging_init() continues the virtual memory environment setup which * was begun by the code in arch/head.S. @@ -78,8 +76,6 @@ void __init mem_init(void) { int codek = 0, datak = 0, initk = 0; unsigned long tmp; - extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end; - extern unsigned int _ramend, _rambase; unsigned long len = _ramend - _rambase; unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ unsigned long end_mem = memory_end; /* DAVIDM - this must not include kernel stack at top */ @@ -95,9 +91,9 @@ void __init mem_init(void) /* this will put all memory onto the freelists */ totalram_pages = free_all_bootmem(); - codek = (&_etext - &_stext) >> 10; - datak = (&_ebss - &_sdata) >> 10; - initk = (&__init_begin - &__init_end) >> 10; + codek = (_etext - _stext) >> 10; + datak = (_ebss - _sdata) >> 10; + initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code, %dk data)\n", @@ -129,22 +125,21 @@ void free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; - extern char __init_begin, __init_end; /* * The following code should be cool even if these sections * are not page aligned. */ - addr = PAGE_ALIGN((unsigned long)(&__init_begin)); + addr = PAGE_ALIGN((unsigned long) __init_begin); /* next to check that the page we free is not a partial page */ - for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { + for (; addr + PAGE_SIZE < ((unsigned long) __init_end); addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } pr_notice("Freeing unused kernel memory: %luk freed (0x%x - 0x%x)\n", - (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, - (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), + (addr - PAGE_ALIGN((unsigned long) __init_begin)) >> 10, + (int)(PAGE_ALIGN((unsigned long) __init_begin)), (int)(addr - PAGE_SIZE)); #endif } diff --git a/arch/m68k/platform/520x/config.c b/arch/m68k/platform/520x/config.c index 621238f1a219..8a98683f1b15 100644 --- a/arch/m68k/platform/520x/config.c +++ b/arch/m68k/platform/520x/config.c @@ -91,9 +91,9 @@ static struct resource m520x_qspi_resources[] = { }, }; -#define MCFQSPI_CS0 62 -#define MCFQSPI_CS1 63 -#define MCFQSPI_CS2 44 +#define MCFQSPI_CS0 46 +#define MCFQSPI_CS1 47 +#define MCFQSPI_CS2 27 static int m520x_cs_setup(struct mcfqspi_cs_control *cs_control) { diff --git a/arch/m68k/platform/520x/gpio.c b/arch/m68k/platform/520x/gpio.c index d757328563d1..9bcc3e4b60c5 100644 --- a/arch/m68k/platform/520x/gpio.c +++ b/arch/m68k/platform/520x/gpio.c @@ -38,42 +38,6 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { }, { .gpio_chip = { - .label = "BUSCTL", - .request = mcf_gpio_request, - .free = mcf_gpio_free, - .direction_input = mcf_gpio_direction_input, - .direction_output = mcf_gpio_direction_output, - .get = mcf_gpio_get_value, - .set = mcf_gpio_set_value_fast, - .base = 8, - .ngpio = 4, - }, - .pddr = (void __iomem *) MCFGPIO_PDDR_BUSCTL, - .podr = (void __iomem *) MCFGPIO_PODR_BUSCTL, - .ppdr = (void __iomem *) MCFGPIO_PPDSDR_BUSCTL, - .setr = (void __iomem *) MCFGPIO_PPDSDR_BUSCTL, - .clrr = (void __iomem *) MCFGPIO_PCLRR_BUSCTL, - }, - { - .gpio_chip = { - .label = "BE", - .request = mcf_gpio_request, - .free = mcf_gpio_free, - .direction_input = mcf_gpio_direction_input, - .direction_output = mcf_gpio_direction_output, - .get = mcf_gpio_get_value, - .set = mcf_gpio_set_value_fast, - .base = 16, - .ngpio = 4, - }, - .pddr = (void __iomem *) MCFGPIO_PDDR_BE, - .podr = (void __iomem *) MCFGPIO_PODR_BE, - .ppdr = (void __iomem *) MCFGPIO_PPDSDR_BE, - .setr = (void __iomem *) MCFGPIO_PPDSDR_BE, - .clrr = (void __iomem *) MCFGPIO_PCLRR_BE, - }, - { - .gpio_chip = { .label = "CS", .request = mcf_gpio_request, .free = mcf_gpio_free, @@ -81,7 +45,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 25, + .base = 9, .ngpio = 3, }, .pddr = (void __iomem *) MCFGPIO_PDDR_CS, @@ -99,7 +63,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 32, + .base = 16, .ngpio = 4, }, .pddr = (void __iomem *) MCFGPIO_PDDR_FECI2C, @@ -117,7 +81,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 40, + .base = 24, .ngpio = 4, }, .pddr = (void __iomem *) MCFGPIO_PDDR_QSPI, @@ -135,7 +99,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 48, + .base = 32, .ngpio = 4, }, .pddr = (void __iomem *) MCFGPIO_PDDR_TIMER, @@ -153,7 +117,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 56, + .base = 40, .ngpio = 8, }, .pddr = (void __iomem *) MCFGPIO_PDDR_UART, @@ -171,7 +135,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 64, + .base = 48, .ngpio = 8, }, .pddr = (void __iomem *) MCFGPIO_PDDR_FECH, @@ -189,7 +153,7 @@ static struct mcf_gpio_chip mcf_gpio_chips[] = { .direction_output = mcf_gpio_direction_output, .get = mcf_gpio_get_value, .set = mcf_gpio_set_value_fast, - .base = 72, + .base = 56, .ngpio = 8, }, .pddr = (void __iomem *) MCFGPIO_PDDR_FECL, diff --git a/arch/m68k/platform/68328/Makefile b/arch/m68k/platform/68328/Makefile index 5e5435552d56..e4dfd8fde068 100644 --- a/arch/m68k/platform/68328/Makefile +++ b/arch/m68k/platform/68328/Makefile @@ -2,7 +2,10 @@ # Makefile for arch/m68knommu/platform/68328. # -head-y = head-$(MODEL).o +model-y := ram +model-$(CONFIG_ROMKERNEL) := rom + +head-y = head-$(model-y).o head-$(CONFIG_PILOT) = head-pilot.o head-$(CONFIG_DRAGEN2) = head-de2.o diff --git a/arch/m68k/platform/68328/entry.S b/arch/m68k/platform/68328/entry.S index 293e1eba9acc..5c39b80ed7de 100644 --- a/arch/m68k/platform/68328/entry.S +++ b/arch/m68k/platform/68328/entry.S @@ -67,7 +67,7 @@ ret_from_signal: jra ret_from_exception ENTRY(system_call) - SAVE_ALL + SAVE_ALL_SYS /* save top of frame*/ pea %sp@ @@ -129,7 +129,7 @@ Lsignal_return: * This is the main interrupt handler, responsible for calling process_int() */ inthandler1: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -140,7 +140,7 @@ inthandler1: bra ret_from_interrupt inthandler2: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -151,7 +151,7 @@ inthandler2: bra ret_from_interrupt inthandler3: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -162,7 +162,7 @@ inthandler3: bra ret_from_interrupt inthandler4: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -173,7 +173,7 @@ inthandler4: bra ret_from_interrupt inthandler5: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -184,7 +184,7 @@ inthandler5: bra ret_from_interrupt inthandler6: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -195,7 +195,7 @@ inthandler6: bra ret_from_interrupt inthandler7: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 @@ -206,7 +206,7 @@ inthandler7: bra ret_from_interrupt inthandler: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and #0x3ff, %d0 diff --git a/arch/m68k/platform/68360/Makefile b/arch/m68k/platform/68360/Makefile index cf5af73a5789..f6f434383049 100644 --- a/arch/m68k/platform/68360/Makefile +++ b/arch/m68k/platform/68360/Makefile @@ -1,10 +1,12 @@ # # Makefile for arch/m68knommu/platform/68360. # +model-y := ram +model-$(CONFIG_ROMKERNEL) := rom obj-y := config.o commproc.o entry.o ints.o extra-y := head.o -$(obj)/head.o: $(obj)/head-$(MODEL).o - ln -sf head-$(MODEL).o $(obj)/head.o +$(obj)/head.o: $(obj)/head-$(model-y).o + ln -sf head-$(model-y).o $(obj)/head.o diff --git a/arch/m68k/platform/68360/entry.S b/arch/m68k/platform/68360/entry.S index abbb89672ea0..aa47d1d49929 100644 --- a/arch/m68k/platform/68360/entry.S +++ b/arch/m68k/platform/68360/entry.S @@ -63,7 +63,7 @@ ret_from_signal: jra ret_from_exception ENTRY(system_call) - SAVE_ALL + SAVE_ALL_SYS /* save top of frame*/ pea %sp@ @@ -125,7 +125,7 @@ Lsignal_return: * This is the main interrupt handler, responsible for calling do_IRQ() */ inthandler: - SAVE_ALL + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC), %d0 and.l #0x3ff, %d0 lsr.l #0x02, %d0 diff --git a/arch/m68k/platform/coldfire/entry.S b/arch/m68k/platform/coldfire/entry.S index bd27242c2f43..3157461a8d1d 100644 --- a/arch/m68k/platform/coldfire/entry.S +++ b/arch/m68k/platform/coldfire/entry.S @@ -61,7 +61,7 @@ enosys: bra 1f ENTRY(system_call) - SAVE_ALL + SAVE_ALL_SYS move #0x2000,%sr /* enable intrs again */ cmpl #NR_syscalls,%d0 @@ -165,9 +165,7 @@ Lsignal_return: * sources). Calls up to high level code to do all the work. */ ENTRY(inthandler) - SAVE_ALL - moveq #-1,%d0 - movel %d0,%sp@(PT_OFF_ORIG_D0) + SAVE_ALL_INT movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */ andl #0x03fc,%d0 /* mask out vector only */ diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README index b26d5f55e91d..93f4c4cd3c45 100644 --- a/arch/m68k/q40/README +++ b/arch/m68k/q40/README @@ -31,7 +31,7 @@ drivers used by the Q40, apart from the very obvious (console etc.): char/joystick/* # most of this should work, not # in default config.in block/q40ide.c # startup for ide - ide* # see Documentation/ide.txt + ide* # see Documentation/ide/ide.txt floppy.c # normal PC driver, DMA emu in asm/floppy.h # and arch/m68k/kernel/entry.S # see drivers/block/README.fd |