summaryrefslogtreecommitdiff
path: root/arch/m68k/platform/coldfire
diff options
context:
space:
mode:
Diffstat (limited to 'arch/m68k/platform/coldfire')
-rw-r--r--arch/m68k/platform/coldfire/Makefile28
-rw-r--r--arch/m68k/platform/coldfire/firebee.c86
-rw-r--r--arch/m68k/platform/coldfire/gpio.c4
-rw-r--r--arch/m68k/platform/coldfire/intc-5249.c61
-rw-r--r--arch/m68k/platform/coldfire/intc-5272.c185
-rw-r--r--arch/m68k/platform/coldfire/m5206.c47
-rw-r--r--arch/m68k/platform/coldfire/m520x.c103
-rw-r--r--arch/m68k/platform/coldfire/m523x.c88
-rw-r--r--arch/m68k/platform/coldfire/m5249.c118
-rw-r--r--arch/m68k/platform/coldfire/m5272.c121
-rw-r--r--arch/m68k/platform/coldfire/m527x.c141
-rw-r--r--arch/m68k/platform/coldfire/m528x.c137
-rw-r--r--arch/m68k/platform/coldfire/m5307.c67
-rw-r--r--arch/m68k/platform/coldfire/m532x.c476
-rw-r--r--arch/m68k/platform/coldfire/m5407.c42
-rw-r--r--arch/m68k/platform/coldfire/m54xx.c112
-rw-r--r--arch/m68k/platform/coldfire/nettel.c153
17 files changed, 1957 insertions, 12 deletions
diff --git a/arch/m68k/platform/coldfire/Makefile b/arch/m68k/platform/coldfire/Makefile
index a0815c61dec1..76d389d9a84e 100644
--- a/arch/m68k/platform/coldfire/Makefile
+++ b/arch/m68k/platform/coldfire/Makefile
@@ -15,18 +15,22 @@
asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
obj-$(CONFIG_COLDFIRE) += cache.o clk.o device.o dma.o entry.o vectors.o
-obj-$(CONFIG_M5206) += timers.o intc.o reset.o
-obj-$(CONFIG_M5206e) += timers.o intc.o reset.o
-obj-$(CONFIG_M520x) += pit.o intc-simr.o reset.o
-obj-$(CONFIG_M523x) += pit.o dma_timer.o intc-2.o reset.o
-obj-$(CONFIG_M5249) += timers.o intc.o reset.o
-obj-$(CONFIG_M527x) += pit.o intc-2.o reset.o
-obj-$(CONFIG_M5272) += timers.o
-obj-$(CONFIG_M528x) += pit.o intc-2.o reset.o
-obj-$(CONFIG_M5307) += timers.o intc.o reset.o
-obj-$(CONFIG_M532x) += timers.o intc-simr.o reset.o
-obj-$(CONFIG_M5407) += timers.o intc.o reset.o
-obj-$(CONFIG_M54xx) += sltimers.o intc-2.o
+obj-$(CONFIG_M5206) += m5206.o timers.o intc.o reset.o
+obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o
+obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
+obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
+obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
+obj-$(CONFIG_M527x) += m527x.o pit.o intc-2.o reset.o
+obj-$(CONFIG_M5272) += m5272.o intc-5272.o timers.o
+obj-$(CONFIG_M528x) += m528x.o pit.o intc-2.o reset.o
+obj-$(CONFIG_M5307) += m5307.o timers.o intc.o reset.o
+obj-$(CONFIG_M532x) += m532x.o timers.o intc-simr.o reset.o
+obj-$(CONFIG_M5407) += m5407.o timers.o intc.o reset.o
+obj-$(CONFIG_M54xx) += m54xx.o sltimers.o intc-2.o
+
+obj-$(CONFIG_NETtel) += nettel.o
+obj-$(CONFIG_CLEOPATRA) += nettel.o
+obj-$(CONFIG_FIREBEE) += firebee.o
obj-y += pinmux.o gpio.o
extra-y := head.o
diff --git a/arch/m68k/platform/coldfire/firebee.c b/arch/m68k/platform/coldfire/firebee.c
new file mode 100644
index 000000000000..46d50534f981
--- /dev/null
+++ b/arch/m68k/platform/coldfire/firebee.c
@@ -0,0 +1,86 @@
+/***************************************************************************/
+
+/*
+ * firebee.c -- extra startup code support for the FireBee boards
+ *
+ * Copyright (C) 2011, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+/***************************************************************************/
+
+/*
+ * 8MB of NOR flash fitted to the FireBee board.
+ */
+#define FLASH_PHYS_ADDR 0xe0000000 /* Physical address of flash */
+#define FLASH_PHYS_SIZE 0x00800000 /* Size of flash */
+
+#define PART_BOOT_START 0x00000000 /* Start at bottom of flash */
+#define PART_BOOT_SIZE 0x00040000 /* 256k in size */
+#define PART_IMAGE_START 0x00040000 /* Start after boot loader */
+#define PART_IMAGE_SIZE 0x006c0000 /* Most of flash */
+#define PART_FPGA_START 0x00700000 /* Start at offset 7MB */
+#define PART_FPGA_SIZE 0x00100000 /* 1MB in size */
+
+static struct mtd_partition firebee_flash_parts[] = {
+ {
+ .name = "dBUG",
+ .offset = PART_BOOT_START,
+ .size = PART_BOOT_SIZE,
+ },
+ {
+ .name = "FPGA",
+ .offset = PART_FPGA_START,
+ .size = PART_FPGA_SIZE,
+ },
+ {
+ .name = "image",
+ .offset = PART_IMAGE_START,
+ .size = PART_IMAGE_SIZE,
+ },
+};
+
+static struct physmap_flash_data firebee_flash_data = {
+ .width = 2,
+ .nr_parts = ARRAY_SIZE(firebee_flash_parts),
+ .parts = firebee_flash_parts,
+};
+
+static struct resource firebee_flash_resource = {
+ .start = FLASH_PHYS_ADDR,
+ .end = FLASH_PHYS_ADDR + FLASH_PHYS_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device firebee_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &firebee_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &firebee_flash_resource,
+};
+
+/***************************************************************************/
+
+static int __init init_firebee(void)
+{
+ platform_device_register(&firebee_flash);
+ return 0;
+}
+
+arch_initcall(init_firebee);
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/gpio.c b/arch/m68k/platform/coldfire/gpio.c
index 292a1a5a2d7c..4c8c42450a4e 100644
--- a/arch/m68k/platform/coldfire/gpio.c
+++ b/arch/m68k/platform/coldfire/gpio.c
@@ -122,6 +122,10 @@ struct bus_type mcf_gpio_subsys = {
static int __init mcf_gpio_sysinit(void)
{
+ unsigned int i = 0;
+
+ while (i < mcf_gpio_chips_size)
+ gpiochip_add((struct gpio_chip *)&mcf_gpio_chips[i++]);
return subsys_system_register(&mcf_gpio_subsys, NULL);
}
diff --git a/arch/m68k/platform/coldfire/intc-5249.c b/arch/m68k/platform/coldfire/intc-5249.c
new file mode 100644
index 000000000000..f343bf7bf5b0
--- /dev/null
+++ b/arch/m68k/platform/coldfire/intc-5249.c
@@ -0,0 +1,61 @@
+/*
+ * intc2.c -- support for the 2nd INTC controller of the 5249
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(struct irq_data *d)
+{
+ u32 imr;
+ imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ imr &= ~(0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
+ writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(struct irq_data *d)
+{
+ u32 imr;
+ imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ imr |= (0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
+ writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(struct irq_data *d)
+{
+ writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR);
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+ .name = "CF-INTC2",
+ .irq_mask = intc2_irq_gpio_mask,
+ .irq_unmask = intc2_irq_gpio_unmask,
+ .irq_ack = intc2_irq_gpio_ack,
+};
+
+static int __init mcf_intc2_init(void)
+{
+ int irq;
+
+ /* GPIO interrupt sources */
+ for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) {
+ irq_set_chip(irq, &intc2_irq_gpio_chip);
+ irq_set_handler(irq, handle_edge_irq);
+ }
+
+ return 0;
+}
+
+arch_initcall(mcf_intc2_init);
diff --git a/arch/m68k/platform/coldfire/intc-5272.c b/arch/m68k/platform/coldfire/intc-5272.c
new file mode 100644
index 000000000000..7160e618b0a9
--- /dev/null
+++ b/arch/m68k/platform/coldfire/intc-5272.c
@@ -0,0 +1,185 @@
+/*
+ * intc.c -- interrupt controller or ColdFire 5272 SoC
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/traps.h>
+
+/*
+ * The 5272 ColdFire interrupt controller is nothing like any other
+ * ColdFire interrupt controller - it truly is completely different.
+ * Given its age it is unlikely to be used on any other ColdFire CPU.
+ */
+
+/*
+ * The masking and priproty setting of interrupts on the 5272 is done
+ * via a set of 4 "Interrupt Controller Registers" (ICR). There is a
+ * loose mapping of vector number to register and internal bits, but
+ * a table is the easiest and quickest way to map them.
+ *
+ * Note that the external interrupts are edge triggered (unlike the
+ * internal interrupt sources which are level triggered). Which means
+ * they also need acknowledging via acknowledge bits.
+ */
+struct irqmap {
+ unsigned char icr;
+ unsigned char index;
+ unsigned char ack;
+};
+
+static struct irqmap intc_irqmap[MCFINT_VECMAX - MCFINT_VECBASE] = {
+ /*MCF_IRQ_SPURIOUS*/ { .icr = 0, .index = 0, .ack = 0, },
+ /*MCF_IRQ_EINT1*/ { .icr = MCFSIM_ICR1, .index = 28, .ack = 1, },
+ /*MCF_IRQ_EINT2*/ { .icr = MCFSIM_ICR1, .index = 24, .ack = 1, },
+ /*MCF_IRQ_EINT3*/ { .icr = MCFSIM_ICR1, .index = 20, .ack = 1, },
+ /*MCF_IRQ_EINT4*/ { .icr = MCFSIM_ICR1, .index = 16, .ack = 1, },
+ /*MCF_IRQ_TIMER1*/ { .icr = MCFSIM_ICR1, .index = 12, .ack = 0, },
+ /*MCF_IRQ_TIMER2*/ { .icr = MCFSIM_ICR1, .index = 8, .ack = 0, },
+ /*MCF_IRQ_TIMER3*/ { .icr = MCFSIM_ICR1, .index = 4, .ack = 0, },
+ /*MCF_IRQ_TIMER4*/ { .icr = MCFSIM_ICR1, .index = 0, .ack = 0, },
+ /*MCF_IRQ_UART1*/ { .icr = MCFSIM_ICR2, .index = 28, .ack = 0, },
+ /*MCF_IRQ_UART2*/ { .icr = MCFSIM_ICR2, .index = 24, .ack = 0, },
+ /*MCF_IRQ_PLIP*/ { .icr = MCFSIM_ICR2, .index = 20, .ack = 0, },
+ /*MCF_IRQ_PLIA*/ { .icr = MCFSIM_ICR2, .index = 16, .ack = 0, },
+ /*MCF_IRQ_USB0*/ { .icr = MCFSIM_ICR2, .index = 12, .ack = 0, },
+ /*MCF_IRQ_USB1*/ { .icr = MCFSIM_ICR2, .index = 8, .ack = 0, },
+ /*MCF_IRQ_USB2*/ { .icr = MCFSIM_ICR2, .index = 4, .ack = 0, },
+ /*MCF_IRQ_USB3*/ { .icr = MCFSIM_ICR2, .index = 0, .ack = 0, },
+ /*MCF_IRQ_USB4*/ { .icr = MCFSIM_ICR3, .index = 28, .ack = 0, },
+ /*MCF_IRQ_USB5*/ { .icr = MCFSIM_ICR3, .index = 24, .ack = 0, },
+ /*MCF_IRQ_USB6*/ { .icr = MCFSIM_ICR3, .index = 20, .ack = 0, },
+ /*MCF_IRQ_USB7*/ { .icr = MCFSIM_ICR3, .index = 16, .ack = 0, },
+ /*MCF_IRQ_DMA*/ { .icr = MCFSIM_ICR3, .index = 12, .ack = 0, },
+ /*MCF_IRQ_ERX*/ { .icr = MCFSIM_ICR3, .index = 8, .ack = 0, },
+ /*MCF_IRQ_ETX*/ { .icr = MCFSIM_ICR3, .index = 4, .ack = 0, },
+ /*MCF_IRQ_ENTC*/ { .icr = MCFSIM_ICR3, .index = 0, .ack = 0, },
+ /*MCF_IRQ_QSPI*/ { .icr = MCFSIM_ICR4, .index = 28, .ack = 0, },
+ /*MCF_IRQ_EINT5*/ { .icr = MCFSIM_ICR4, .index = 24, .ack = 1, },
+ /*MCF_IRQ_EINT6*/ { .icr = MCFSIM_ICR4, .index = 20, .ack = 1, },
+ /*MCF_IRQ_SWTO*/ { .icr = MCFSIM_ICR4, .index = 16, .ack = 0, },
+};
+
+/*
+ * The act of masking the interrupt also has a side effect of 'ack'ing
+ * an interrupt on this irq (for the external irqs). So this mask function
+ * is also an ack_mask function.
+ */
+static void intc_irq_mask(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+ u32 v;
+ irq -= MCFINT_VECBASE;
+ v = 0x8 << intc_irqmap[irq].index;
+ writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+ }
+}
+
+static void intc_irq_unmask(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+ u32 v;
+ irq -= MCFINT_VECBASE;
+ v = 0xd << intc_irqmap[irq].index;
+ writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+ }
+}
+
+static void intc_irq_ack(struct irq_data *d)
+{
+ unsigned int irq = d->irq;
+
+ /* Only external interrupts are acked */
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+ irq -= MCFINT_VECBASE;
+ if (intc_irqmap[irq].ack) {
+ u32 v;
+ v = readl(MCF_MBAR + intc_irqmap[irq].icr);
+ v &= (0x7 << intc_irqmap[irq].index);
+ v |= (0x8 << intc_irqmap[irq].index);
+ writel(v, MCF_MBAR + intc_irqmap[irq].icr);
+ }
+ }
+}
+
+static int intc_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ unsigned int irq = d->irq;
+
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX)) {
+ irq -= MCFINT_VECBASE;
+ if (intc_irqmap[irq].ack) {
+ u32 v;
+ v = readl(MCF_MBAR + MCFSIM_PITR);
+ if (type == IRQ_TYPE_EDGE_FALLING)
+ v &= ~(0x1 << (32 - irq));
+ else
+ v |= (0x1 << (32 - irq));
+ writel(v, MCF_MBAR + MCFSIM_PITR);
+ }
+ }
+ return 0;
+}
+
+/*
+ * Simple flow handler to deal with the external edge triggered interrupts.
+ * We need to be careful with the masking/acking due to the side effects
+ * of masking an interrupt.
+ */
+static void intc_external_irq(unsigned int irq, struct irq_desc *desc)
+{
+ irq_desc_get_chip(desc)->irq_ack(&desc->irq_data);
+ handle_simple_irq(irq, desc);
+}
+
+static struct irq_chip intc_irq_chip = {
+ .name = "CF-INTC",
+ .irq_mask = intc_irq_mask,
+ .irq_unmask = intc_irq_unmask,
+ .irq_mask_ack = intc_irq_mask,
+ .irq_ack = intc_irq_ack,
+ .irq_set_type = intc_irq_set_type,
+};
+
+void __init init_IRQ(void)
+{
+ int irq, edge;
+
+ /* Mask all interrupt sources */
+ writel(0x88888888, MCF_MBAR + MCFSIM_ICR1);
+ writel(0x88888888, MCF_MBAR + MCFSIM_ICR2);
+ writel(0x88888888, MCF_MBAR + MCFSIM_ICR3);
+ writel(0x88888888, MCF_MBAR + MCFSIM_ICR4);
+
+ for (irq = 0; (irq < NR_IRQS); irq++) {
+ irq_set_chip(irq, &intc_irq_chip);
+ edge = 0;
+ if ((irq >= MCFINT_VECBASE) && (irq <= MCFINT_VECMAX))
+ edge = intc_irqmap[irq - MCFINT_VECBASE].ack;
+ if (edge) {
+ irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+ irq_set_handler(irq, intc_external_irq);
+ } else {
+ irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH);
+ irq_set_handler(irq, handle_level_irq);
+ }
+ }
+}
+
diff --git a/arch/m68k/platform/coldfire/m5206.c b/arch/m68k/platform/coldfire/m5206.c
new file mode 100644
index 000000000000..a8b81df653f0
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m5206.c
@@ -0,0 +1,47 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5206/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2000-2001, Lineo Inc. (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(PP, 0, 8, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0xf0004000, size);
+ commandp[size-1] = 0;
+#endif /* CONFIG_NETtel */
+
+ mach_sched_init = hw_timer_init;
+
+ /* Only support the external interrupts on their primary level */
+ mcf_mapirq2imr(25, MCFINTC_EINT1);
+ mcf_mapirq2imr(28, MCFINTC_EINT4);
+ mcf_mapirq2imr(31, MCFINTC_EINT7);
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m520x.c b/arch/m68k/platform/coldfire/m520x.c
new file mode 100644
index 000000000000..3264b8883d5f
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m520x.c
@@ -0,0 +1,103 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/520x/config.c
+ *
+ * Copyright (C) 2005, Freescale (www.freescale.com)
+ * Copyright (C) 2005, Intec Automation (mike@steroidmicros.com)
+ * Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+ MCFGPF(CS, 9, 3),
+ MCFGPF(FECI2C, 16, 4),
+ MCFGPF(QSPI, 24, 4),
+ MCFGPF(TIMER, 32, 4),
+ MCFGPF(UART, 40, 8),
+ MCFGPF(FECH, 48, 8),
+ MCFGPF(FECL, 56, 8),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m520x_qspi_init(void)
+{
+ u16 par;
+ /* setup Port QS for QSPI with gpio CS control */
+ writeb(0x3f, MCF_GPIO_PAR_QSPI);
+ /* make U1CTS and U2RTS gpio for cs_control */
+ par = readw(MCF_GPIO_PAR_UART);
+ par &= 0x00ff;
+ writew(par, MCF_GPIO_PAR_UART);
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+static void __init m520x_uarts_init(void)
+{
+ u16 par;
+ u8 par2;
+
+ /* UART0 and UART1 GPIO pin setup */
+ par = readw(MCF_GPIO_PAR_UART);
+ par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
+ par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
+ writew(par, MCF_GPIO_PAR_UART);
+
+ /* UART1 GPIO pin setup */
+ par2 = readb(MCF_GPIO_PAR_FECI2C);
+ par2 &= ~0x0F;
+ par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
+ MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
+ writeb(par2, MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+static void __init m520x_fec_init(void)
+{
+ u8 v;
+
+ /* Set multi-function pins to ethernet mode */
+ v = readb(MCF_GPIO_PAR_FEC);
+ writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
+
+ v = readb(MCF_GPIO_PAR_FECI2C);
+ writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+ m520x_uarts_init();
+ m520x_fec_init();
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ m520x_qspi_init();
+#endif
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m523x.c b/arch/m68k/platform/coldfire/m523x.c
new file mode 100644
index 000000000000..5d57a4249412
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m523x.c
@@ -0,0 +1,88 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/523x/config.c
+ *
+ * Sub-architcture dependent initialization code for the Freescale
+ * 523x CPUs.
+ *
+ * Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+ MCFGPF(ADDR, 13, 3),
+ MCFGPF(DATAH, 16, 8),
+ MCFGPF(DATAL, 24, 8),
+ MCFGPF(BUSCTL, 32, 8),
+ MCFGPF(BS, 40, 4),
+ MCFGPF(CS, 49, 7),
+ MCFGPF(SDRAM, 56, 6),
+ MCFGPF(FECI2C, 64, 4),
+ MCFGPF(UARTH, 72, 2),
+ MCFGPF(UARTL, 80, 8),
+ MCFGPF(QSPI, 88, 5),
+ MCFGPF(TIMER, 96, 8),
+ MCFGPF(ETPU, 104, 3),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m523x_qspi_init(void)
+{
+ u16 par;
+
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writeb(0x1f, MCFGPIO_PAR_QSPI);
+ /* and CS2 & CS3 as gpio */
+ par = readw(MCFGPIO_PAR_TIMER);
+ par &= 0x3f3f;
+ writew(par, MCFGPIO_PAR_TIMER);
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+static void __init m523x_fec_init(void)
+{
+ u16 par;
+ u8 v;
+
+ /* Set multi-function pins to ethernet use */
+ par = readw(MCF_IPSBAR + 0x100082);
+ writew(par | 0xf00, MCF_IPSBAR + 0x100082);
+ v = readb(MCF_IPSBAR + 0x100078);
+ writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+ m523x_fec_init();
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ m523x_qspi_init();
+#endif
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m5249.c b/arch/m68k/platform/coldfire/m5249.c
new file mode 100644
index 000000000000..fdfa1edfd1ac
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m5249.c
@@ -0,0 +1,118 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5249/config.c
+ *
+ * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(GPIO0, 0, 32, MCFSIM2_GPIOENABLE, MCFSIM2_GPIOWRITE, MCFSIM2_GPIOREAD),
+ MCFGPS(GPIO1, 32, 32, MCFSIM2_GPIO1ENABLE, MCFSIM2_GPIO1WRITE, MCFSIM2_GPIO1READ),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#ifdef CONFIG_M5249C3
+
+static struct resource m5249_smc91x_resources[] = {
+ {
+ .start = 0xe0000300,
+ .end = 0xe0000300 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MCFINTC2_GPIOIRQ6,
+ .end = MCFINTC2_GPIOIRQ6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device m5249_smc91x = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(m5249_smc91x_resources),
+ .resource = m5249_smc91x_resources,
+};
+
+#endif /* CONFIG_M5249C3 */
+
+static struct platform_device *m5249_devices[] __initdata = {
+#ifdef CONFIG_M5249C3
+ &m5249_smc91x,
+#endif
+};
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m5249_qspi_init(void)
+{
+ /* QSPI irq setup */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+ MCF_MBAR + MCFSIM_QSPIICR);
+ mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+#ifdef CONFIG_M5249C3
+
+static void __init m5249_smc91x_init(void)
+{
+ u32 gpio;
+
+ /* Set the GPIO line as interrupt source for smc91x device */
+ gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+
+ gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+ writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+}
+
+#endif /* CONFIG_M5249C3 */
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+
+#ifdef CONFIG_M5249C3
+ m5249_smc91x_init();
+#endif
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ m5249_qspi_init();
+#endif
+}
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m5272.c b/arch/m68k/platform/coldfire/m5272.c
new file mode 100644
index 000000000000..43e36060da18
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m5272.c
@@ -0,0 +1,121 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5272/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2002, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+/*
+ * Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(PA, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
+ MCFGPS(PB, 16, 16, MCFSIM_PBDDR, MCFSIM_PBDAT, MCFSIM_PBDAT),
+ MCFGPS(Pc, 32, 16, MCFSIM_PCDDR, MCFSIM_PCDAT, MCFSIM_PCDAT),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+static void __init m5272_uarts_init(void)
+{
+ u32 v;
+
+ /* Enable the output lines for the serial ports */
+ v = readl(MCF_MBAR + MCFSIM_PBCNT);
+ v = (v & ~0x000000ff) | 0x00000055;
+ writel(v, MCF_MBAR + MCFSIM_PBCNT);
+
+ v = readl(MCF_MBAR + MCFSIM_PDCNT);
+ v = (v & ~0x000003fc) | 0x000002a8;
+ writel(v, MCF_MBAR + MCFSIM_PDCNT);
+}
+
+/***************************************************************************/
+
+static void m5272_cpu_reset(void)
+{
+ local_irq_disable();
+ /* Set watchdog to reset, and enabled */
+ __raw_writew(0, MCF_MBAR + MCFSIM_WIRR);
+ __raw_writew(1, MCF_MBAR + MCFSIM_WRRR);
+ __raw_writew(0, MCF_MBAR + MCFSIM_WCR);
+ for (;;)
+ /* wait for watchdog to timeout */;
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined (CONFIG_MOD5272)
+ volatile unsigned char *pivrp;
+
+ /* Set base of device vectors to be 64 */
+ pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR);
+ *pivrp = 0x40;
+#endif
+
+#if defined(CONFIG_NETtel) || defined(CONFIG_SCALES)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0xf0004000, size);
+ commandp[size-1] = 0;
+#elif defined(CONFIG_CANCam)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0xf0010000, size);
+ commandp[size-1] = 0;
+#endif
+
+ mach_reset = m5272_cpu_reset;
+ mach_sched_init = hw_timer_init;
+}
+
+/***************************************************************************/
+
+/*
+ * Some 5272 based boards have the FEC ethernet diectly connected to
+ * an ethernet switch. In this case we need to use the fixed phy type,
+ * and we need to declare it early in boot.
+ */
+static struct fixed_phy_status nettel_fixed_phy_status __initdata = {
+ .link = 1,
+ .speed = 100,
+ .duplex = 0,
+};
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ m5272_uarts_init();
+ fixed_phy_add(PHY_POLL, 0, &nettel_fixed_phy_status);
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m527x.c b/arch/m68k/platform/coldfire/m527x.c
new file mode 100644
index 000000000000..9b0b66aabd1b
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m527x.c
@@ -0,0 +1,141 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/527x/config.c
+ *
+ * Sub-architcture dependent initialization code for the Freescale
+ * 5270/5271 CPUs.
+ *
+ * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+#if defined(CONFIG_M5271)
+ MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+ MCFGPF(ADDR, 13, 3),
+ MCFGPF(DATAH, 16, 8),
+ MCFGPF(DATAL, 24, 8),
+ MCFGPF(BUSCTL, 32, 8),
+ MCFGPF(BS, 40, 4),
+ MCFGPF(CS, 49, 7),
+ MCFGPF(SDRAM, 56, 6),
+ MCFGPF(FECI2C, 64, 4),
+ MCFGPF(UARTH, 72, 2),
+ MCFGPF(UARTL, 80, 8),
+ MCFGPF(QSPI, 88, 5),
+ MCFGPF(TIMER, 96, 8),
+#elif defined(CONFIG_M5275)
+ MCFGPS(PIRQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+ MCFGPF(BUSCTL, 8, 8),
+ MCFGPF(ADDR, 21, 3),
+ MCFGPF(CS, 25, 7),
+ MCFGPF(FEC0H, 32, 8),
+ MCFGPF(FEC0L, 40, 8),
+ MCFGPF(FECI2C, 48, 6),
+ MCFGPF(QSPI, 56, 7),
+ MCFGPF(SDRAM, 64, 8),
+ MCFGPF(TIMERH, 72, 4),
+ MCFGPF(TIMERL, 80, 4),
+ MCFGPF(UARTL, 88, 8),
+ MCFGPF(FEC1H, 96, 8),
+ MCFGPF(FEC1L, 104, 8),
+ MCFGPF(BS, 114, 2),
+ MCFGPF(IRQ, 121, 7),
+ MCFGPF(USBH, 128, 1),
+ MCFGPF(USBL, 136, 8),
+ MCFGPF(UARTH, 144, 4),
+#endif
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m527x_qspi_init(void)
+{
+#if defined(CONFIG_M5271)
+ u16 par;
+
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writeb(0x1f, MCFGPIO_PAR_QSPI);
+ /* and CS2 & CS3 as gpio */
+ par = readw(MCFGPIO_PAR_TIMER);
+ par &= 0x3f3f;
+ writew(par, MCFGPIO_PAR_TIMER);
+#elif defined(CONFIG_M5275)
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writew(0x003e, MCFGPIO_PAR_QSPI);
+#endif
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+static void __init m527x_uarts_init(void)
+{
+ u16 sepmask;
+
+ /*
+ * External Pin Mask Setting & Enable External Pin for Interface
+ */
+ sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART);
+ sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
+ writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART);
+}
+
+/***************************************************************************/
+
+static void __init m527x_fec_init(void)
+{
+ u16 par;
+ u8 v;
+
+ /* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+ v = readb(MCF_IPSBAR + 0x100047);
+ writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
+#else
+ par = readw(MCF_IPSBAR + 0x100082);
+ writew(par | 0xf00, MCF_IPSBAR + 0x100082);
+ v = readb(MCF_IPSBAR + 0x100078);
+ writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+
+ /* Set multi-function pins to ethernet mode for fec1 */
+ par = readw(MCF_IPSBAR + 0x100082);
+ writew(par | 0xa0, MCF_IPSBAR + 0x100082);
+ v = readb(MCF_IPSBAR + 0x100079);
+ writeb(v | 0xc0, MCF_IPSBAR + 0x100079);
+#endif
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+ m527x_uarts_init();
+ m527x_fec_init();
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ m527x_qspi_init();
+#endif
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m528x.c b/arch/m68k/platform/coldfire/m528x.c
new file mode 100644
index 000000000000..7ed1276b29dc
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m528x.c
@@ -0,0 +1,137 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/528x/config.c
+ *
+ * Sub-architcture dependent initialization code for the Freescale
+ * 5280, 5281 and 5282 CPUs.
+ *
+ * Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(NQ, 1, 7, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+ MCFGPS(TA, 8, 4, MCFGPTA_GPTDDR, MCFGPTA_GPTPORT, MCFGPTB_GPTPORT),
+ MCFGPS(TB, 16, 4, MCFGPTB_GPTDDR, MCFGPTB_GPTPORT, MCFGPTB_GPTPORT),
+ MCFGPS(QA, 24, 4, MCFQADC_DDRQA, MCFQADC_PORTQA, MCFQADC_PORTQA),
+ MCFGPS(QB, 32, 4, MCFQADC_DDRQB, MCFQADC_PORTQB, MCFQADC_PORTQB),
+ MCFGPF(A, 40, 8),
+ MCFGPF(B, 48, 8),
+ MCFGPF(C, 56, 8),
+ MCFGPF(D, 64, 8),
+ MCFGPF(E, 72, 8),
+ MCFGPF(F, 80, 8),
+ MCFGPF(G, 88, 8),
+ MCFGPF(H, 96, 8),
+ MCFGPF(J, 104, 8),
+ MCFGPF(DD, 112, 8),
+ MCFGPF(EH, 120, 8),
+ MCFGPF(EL, 128, 8),
+ MCFGPF(AS, 136, 6),
+ MCFGPF(QS, 144, 7),
+ MCFGPF(SD, 152, 6),
+ MCFGPF(TC, 160, 4),
+ MCFGPF(TD, 168, 4),
+ MCFGPF(UA, 176, 4),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m528x_qspi_init(void)
+{
+ /* setup Port QS for QSPI with gpio CS control */
+ __raw_writeb(0x07, MCFGPIO_PQSPAR);
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+static void __init m528x_uarts_init(void)
+{
+ u8 port;
+
+ /* make sure PUAPAR is set for UART0 and UART1 */
+ port = readb(MCF5282_GPIO_PUAPAR);
+ port |= 0x03 | (0x03 << 2);
+ writeb(port, MCF5282_GPIO_PUAPAR);
+}
+
+/***************************************************************************/
+
+static void __init m528x_fec_init(void)
+{
+ u16 v16;
+
+ /* Set multi-function pins to ethernet mode for fec0 */
+ v16 = readw(MCF_IPSBAR + 0x100056);
+ writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
+ writeb(0xc0, MCF_IPSBAR + 0x100058);
+}
+
+/***************************************************************************/
+
+#ifdef CONFIG_WILDFIRE
+void wildfire_halt(void)
+{
+ writeb(0, 0x30000007);
+ writeb(0x2, 0x30000007);
+}
+#endif
+
+#ifdef CONFIG_WILDFIREMOD
+void wildfiremod_halt(void)
+{
+ printk(KERN_INFO "WildFireMod hibernating...\n");
+
+ /* Set portE.5 to Digital IO */
+ MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
+
+ /* Make portE.5 an output */
+ MCF5282_GPIO_DDRE |= (1 << 5);
+
+ /* Now toggle portE.5 from low to high */
+ MCF5282_GPIO_PORTE &= ~(1 << 5);
+ MCF5282_GPIO_PORTE |= (1 << 5);
+
+ printk(KERN_EMERG "Failed to hibernate. Halting!\n");
+}
+#endif
+
+void __init config_BSP(char *commandp, int size)
+{
+#ifdef CONFIG_WILDFIRE
+ mach_halt = wildfire_halt;
+#endif
+#ifdef CONFIG_WILDFIREMOD
+ mach_halt = wildfiremod_halt;
+#endif
+ mach_sched_init = hw_timer_init;
+ m528x_uarts_init();
+ m528x_fec_init();
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ m528x_qspi_init();
+#endif
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m5307.c b/arch/m68k/platform/coldfire/m5307.c
new file mode 100644
index 000000000000..93b484976ab3
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m5307.c
@@ -0,0 +1,67 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5307/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2000, Lineo (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+#include <asm/mcfwdebug.h>
+
+/***************************************************************************/
+
+/*
+ * Some platforms need software versions of the GPIO data registers.
+ */
+unsigned short ppdata;
+unsigned char ledbank = 0xff;
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if defined(CONFIG_NETtel) || \
+ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0xf0004000, size);
+ commandp[size-1] = 0;
+#endif
+
+ mach_sched_init = hw_timer_init;
+
+ /* Only support the external interrupts on their primary level */
+ mcf_mapirq2imr(25, MCFINTC_EINT1);
+ mcf_mapirq2imr(27, MCFINTC_EINT3);
+ mcf_mapirq2imr(29, MCFINTC_EINT5);
+ mcf_mapirq2imr(31, MCFINTC_EINT7);
+
+#ifdef CONFIG_BDM_DISABLE
+ /*
+ * Disable the BDM clocking. This also turns off most of the rest of
+ * the BDM device. This is good for EMC reasons. This option is not
+ * incompatible with the memory protection option.
+ */
+ wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
+#endif
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m532x.c
new file mode 100644
index 000000000000..8e9476d59a65
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m532x.c
@@ -0,0 +1,476 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/532x/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2000, Lineo (www.lineo.com)
+ * Yaroslav Vinogradov yaroslav.vinogradov@freescale.com
+ * Copyright Freescale Semiconductor, Inc 2006
+ * Copyright (c) 2006, emlix, Sebastian Hess <sh@emlix.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfdma.h>
+#include <asm/mcfgpio.h>
+#include <asm/mcfwdebug.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+ MCFGPF(FECH, 8, 8),
+ MCFGPF(FECL, 16, 8),
+ MCFGPF(SSI, 24, 5),
+ MCFGPF(BUSCTL, 32, 4),
+ MCFGPF(BE, 40, 4),
+ MCFGPF(CS, 49, 5),
+ MCFGPF(PWM, 58, 4),
+ MCFGPF(FECI2C, 64, 4),
+ MCFGPF(UART, 72, 8),
+ MCFGPF(QSPI, 80, 6),
+ MCFGPF(TIMER, 88, 4),
+ MCFGPF(LCDDATAH, 96, 2),
+ MCFGPF(LCDDATAM, 104, 8),
+ MCFGPF(LCDDATAL, 112, 8),
+ MCFGPF(LCDCTLH, 120, 1),
+ MCFGPF(LCDCTLL, 128, 8),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m532x_qspi_init(void)
+{
+ /* setup QSPS pins for QSPI with gpio CS control */
+ writew(0x01f0, MCF_GPIO_PAR_QSPI);
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+static void __init m532x_uarts_init(void)
+{
+ /* UART GPIO initialization */
+ MCF_GPIO_PAR_UART |= 0x0FFF;
+}
+
+/***************************************************************************/
+
+static void __init m532x_fec_init(void)
+{
+ /* Set multi-function pins to ethernet mode for fec0 */
+ MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC |
+ MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO);
+ MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC |
+ MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#if !defined(CONFIG_BOOTPARAM)
+ /* Copy command line from FLASH to local buffer... */
+ memcpy(commandp, (char *) 0x4000, 4);
+ if(strncmp(commandp, "kcl ", 4) == 0){
+ memcpy(commandp, (char *) 0x4004, size);
+ commandp[size-1] = 0;
+ } else {
+ memset(commandp, 0, size);
+ }
+#endif
+
+ mach_sched_init = hw_timer_init;
+ m532x_uarts_init();
+ m532x_fec_init();
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ m532x_qspi_init();
+#endif
+
+#ifdef CONFIG_BDM_DISABLE
+ /*
+ * Disable the BDM clocking. This also turns off most of the rest of
+ * the BDM device. This is good for EMC reasons. This option is not
+ * incompatible with the memory protection option.
+ */
+ wdebug(MCFDEBUG_CSR, MCFDEBUG_CSR_PSTCLK);
+#endif
+}
+
+/***************************************************************************/
+/* Board initialization */
+/***************************************************************************/
+/*
+ * PLL min/max specifications
+ */
+#define MAX_FVCO 500000 /* KHz */
+#define MAX_FSYS 80000 /* KHz */
+#define MIN_FSYS 58333 /* KHz */
+#define FREF 16000 /* KHz */
+
+
+#define MAX_MFD 135 /* Multiplier */
+#define MIN_MFD 88 /* Multiplier */
+#define BUSDIV 6 /* Divider */
+
+/*
+ * Low Power Divider specifications
+ */
+#define MIN_LPD (1 << 0) /* Divider (not encoded) */
+#define MAX_LPD (1 << 15) /* Divider (not encoded) */
+#define DEFAULT_LPD (1 << 1) /* Divider (not encoded) */
+
+#define SYS_CLK_KHZ 80000
+#define SYSTEM_PERIOD 12.5
+/*
+ * SDRAM Timing Parameters
+ */
+#define SDRAM_BL 8 /* # of beats in a burst */
+#define SDRAM_TWR 2 /* in clocks */
+#define SDRAM_CASL 2.5 /* CASL in clocks */
+#define SDRAM_TRCD 2 /* in clocks */
+#define SDRAM_TRP 2 /* in clocks */
+#define SDRAM_TRFC 7 /* in clocks */
+#define SDRAM_TREFI 7800 /* in ns */
+
+#define EXT_SRAM_ADDRESS (0xC0000000)
+#define FLASH_ADDRESS (0x00000000)
+#define SDRAM_ADDRESS (0x40000000)
+
+#define NAND_FLASH_ADDRESS (0xD0000000)
+
+int sys_clk_khz = 0;
+int sys_clk_mhz = 0;
+
+void wtm_init(void);
+void scm_init(void);
+void gpio_init(void);
+void fbcs_init(void);
+void sdramc_init(void);
+int clock_pll (int fsys, int flags);
+int clock_limp (int);
+int clock_exit_limp (void);
+int get_sys_clock (void);
+
+asmlinkage void __init sysinit(void)
+{
+ sys_clk_khz = clock_pll(0, 0);
+ sys_clk_mhz = sys_clk_khz/1000;
+
+ wtm_init();
+ scm_init();
+ gpio_init();
+ fbcs_init();
+ sdramc_init();
+}
+
+void wtm_init(void)
+{
+ /* Disable watchdog timer */
+ MCF_WTM_WCR = 0;
+}
+
+#define MCF_SCM_BCR_GBW (0x00000100)
+#define MCF_SCM_BCR_GBR (0x00000200)
+
+void scm_init(void)
+{
+ /* All masters are trusted */
+ MCF_SCM_MPR = 0x77777777;
+
+ /* Allow supervisor/user, read/write, and trusted/untrusted
+ access to all slaves */
+ MCF_SCM_PACRA = 0;
+ MCF_SCM_PACRB = 0;
+ MCF_SCM_PACRC = 0;
+ MCF_SCM_PACRD = 0;
+ MCF_SCM_PACRE = 0;
+ MCF_SCM_PACRF = 0;
+
+ /* Enable bursts */
+ MCF_SCM_BCR = (MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW);
+}
+
+
+void fbcs_init(void)
+{
+ MCF_GPIO_PAR_CS = 0x0000003E;
+
+ /* Latch chip select */
+ MCF_FBCS1_CSAR = 0x10080000;
+
+ MCF_FBCS1_CSCR = 0x002A3780;
+ MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V);
+
+ /* Initialize latch to drive signals to inactive states */
+ *((u16 *)(0x10080000)) = 0xFFFF;
+
+ /* External SRAM */
+ MCF_FBCS1_CSAR = EXT_SRAM_ADDRESS;
+ MCF_FBCS1_CSCR = (MCF_FBCS_CSCR_PS_16
+ | MCF_FBCS_CSCR_AA
+ | MCF_FBCS_CSCR_SBM
+ | MCF_FBCS_CSCR_WS(1));
+ MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_512K
+ | MCF_FBCS_CSMR_V);
+
+ /* Boot Flash connected to FBCS0 */
+ MCF_FBCS0_CSAR = FLASH_ADDRESS;
+ MCF_FBCS0_CSCR = (MCF_FBCS_CSCR_PS_16
+ | MCF_FBCS_CSCR_BEM
+ | MCF_FBCS_CSCR_AA
+ | MCF_FBCS_CSCR_SBM
+ | MCF_FBCS_CSCR_WS(7));
+ MCF_FBCS0_CSMR = (MCF_FBCS_CSMR_BAM_32M
+ | MCF_FBCS_CSMR_V);
+}
+
+void sdramc_init(void)
+{
+ /*
+ * Check to see if the SDRAM has already been initialized
+ * by a run control tool
+ */
+ if (!(MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)) {
+ /* SDRAM chip select initialization */
+
+ /* Initialize SDRAM chip select */
+ MCF_SDRAMC_SDCS0 = (0
+ | MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS)
+ | MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE));
+
+ /*
+ * Basic configuration and initialization
+ */
+ MCF_SDRAMC_SDCFG1 = (0
+ | MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5 ))
+ | MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1)
+ | MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL*2) + 2))
+ | MCF_SDRAMC_SDCFG1_ACT2RW((int)((SDRAM_TRCD ) + 0.5))
+ | MCF_SDRAMC_SDCFG1_PRE2ACT((int)((SDRAM_TRP ) + 0.5))
+ | MCF_SDRAMC_SDCFG1_REF2ACT((int)(((SDRAM_TRFC) ) + 0.5))
+ | MCF_SDRAMC_SDCFG1_WTLAT(3));
+ MCF_SDRAMC_SDCFG2 = (0
+ | MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL/2 + 1)
+ | MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL/2 + SDRAM_TWR)
+ | MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL+SDRAM_BL/2-1.0)+0.5))
+ | MCF_SDRAMC_SDCFG2_BL(SDRAM_BL-1));
+
+
+ /*
+ * Precharge and enable write to SDMR
+ */
+ MCF_SDRAMC_SDCR = (0
+ | MCF_SDRAMC_SDCR_MODE_EN
+ | MCF_SDRAMC_SDCR_CKE
+ | MCF_SDRAMC_SDCR_DDR
+ | MCF_SDRAMC_SDCR_MUX(1)
+ | MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI/(SYSTEM_PERIOD*64)) - 1) + 0.5))
+ | MCF_SDRAMC_SDCR_PS_16
+ | MCF_SDRAMC_SDCR_IPALL);
+
+ /*
+ * Write extended mode register
+ */
+ MCF_SDRAMC_SDMR = (0
+ | MCF_SDRAMC_SDMR_BNKAD_LEMR
+ | MCF_SDRAMC_SDMR_AD(0x0)
+ | MCF_SDRAMC_SDMR_CMD);
+
+ /*
+ * Write mode register and reset DLL
+ */
+ MCF_SDRAMC_SDMR = (0
+ | MCF_SDRAMC_SDMR_BNKAD_LMR
+ | MCF_SDRAMC_SDMR_AD(0x163)
+ | MCF_SDRAMC_SDMR_CMD);
+
+ /*
+ * Execute a PALL command
+ */
+ MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IPALL;
+
+ /*
+ * Perform two REF cycles
+ */
+ MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF;
+ MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF;
+
+ /*
+ * Write mode register and clear reset DLL
+ */
+ MCF_SDRAMC_SDMR = (0
+ | MCF_SDRAMC_SDMR_BNKAD_LMR
+ | MCF_SDRAMC_SDMR_AD(0x063)
+ | MCF_SDRAMC_SDMR_CMD);
+
+ /*
+ * Enable auto refresh and lock SDMR
+ */
+ MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_MODE_EN;
+ MCF_SDRAMC_SDCR |= (0
+ | MCF_SDRAMC_SDCR_REF
+ | MCF_SDRAMC_SDCR_DQS_OE(0xC));
+ }
+}
+
+void gpio_init(void)
+{
+ /* Enable UART0 pins */
+ MCF_GPIO_PAR_UART = ( 0
+ | MCF_GPIO_PAR_UART_PAR_URXD0
+ | MCF_GPIO_PAR_UART_PAR_UTXD0);
+
+ /* Initialize TIN3 as a GPIO output to enable the write
+ half of the latch */
+ MCF_GPIO_PAR_TIMER = 0x00;
+ __raw_writeb(0x08, MCFGPIO_PDDR_TIMER);
+ __raw_writeb(0x00, MCFGPIO_PCLRR_TIMER);
+
+}
+
+int clock_pll(int fsys, int flags)
+{
+ int fref, temp, fout, mfd;
+ u32 i;
+
+ fref = FREF;
+
+ if (fsys == 0) {
+ /* Return current PLL output */
+ mfd = MCF_PLL_PFDR;
+
+ return (fref * mfd / (BUSDIV * 4));
+ }
+
+ /* Check bounds of requested system clock */
+ if (fsys > MAX_FSYS)
+ fsys = MAX_FSYS;
+ if (fsys < MIN_FSYS)
+ fsys = MIN_FSYS;
+
+ /* Multiplying by 100 when calculating the temp value,
+ and then dividing by 100 to calculate the mfd allows
+ for exact values without needing to include floating
+ point libraries. */
+ temp = 100 * fsys / fref;
+ mfd = 4 * BUSDIV * temp / 100;
+
+ /* Determine the output frequency for selected values */
+ fout = (fref * mfd / (BUSDIV * 4));
+
+ /*
+ * Check to see if the SDRAM has already been initialized.
+ * If it has then the SDRAM needs to be put into self refresh
+ * mode before reprogramming the PLL.
+ */
+ if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)
+ /* Put SDRAM into self refresh mode */
+ MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_CKE;
+
+ /*
+ * Initialize the PLL to generate the new system clock frequency.
+ * The device must be put into LIMP mode to reprogram the PLL.
+ */
+
+ /* Enter LIMP mode */
+ clock_limp(DEFAULT_LPD);
+
+ /* Reprogram PLL for desired fsys */
+ MCF_PLL_PODR = (0
+ | MCF_PLL_PODR_CPUDIV(BUSDIV/3)
+ | MCF_PLL_PODR_BUSDIV(BUSDIV));
+
+ MCF_PLL_PFDR = mfd;
+
+ /* Exit LIMP mode */
+ clock_exit_limp();
+
+ /*
+ * Return the SDRAM to normal operation if it is in use.
+ */
+ if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)
+ /* Exit self refresh mode */
+ MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_CKE;
+
+ /* Errata - workaround for SDRAM opeartion after exiting LIMP mode */
+ MCF_SDRAMC_LIMP_FIX = MCF_SDRAMC_REFRESH;
+
+ /* wait for DQS logic to relock */
+ for (i = 0; i < 0x200; i++)
+ ;
+
+ return fout;
+}
+
+int clock_limp(int div)
+{
+ u32 temp;
+
+ /* Check bounds of divider */
+ if (div < MIN_LPD)
+ div = MIN_LPD;
+ if (div > MAX_LPD)
+ div = MAX_LPD;
+
+ /* Save of the current value of the SSIDIV so we don't
+ overwrite the value*/
+ temp = (MCF_CCM_CDR & MCF_CCM_CDR_SSIDIV(0xF));
+
+ /* Apply the divider to the system clock */
+ MCF_CCM_CDR = ( 0
+ | MCF_CCM_CDR_LPDIV(div)
+ | MCF_CCM_CDR_SSIDIV(temp));
+
+ MCF_CCM_MISCCR |= MCF_CCM_MISCCR_LIMP;
+
+ return (FREF/(3*(1 << div)));
+}
+
+int clock_exit_limp(void)
+{
+ int fout;
+
+ /* Exit LIMP mode */
+ MCF_CCM_MISCCR = (MCF_CCM_MISCCR & ~ MCF_CCM_MISCCR_LIMP);
+
+ /* Wait for PLL to lock */
+ while (!(MCF_CCM_MISCCR & MCF_CCM_MISCCR_PLL_LOCK))
+ ;
+
+ fout = get_sys_clock();
+
+ return fout;
+}
+
+int get_sys_clock(void)
+{
+ int divider;
+
+ /* Test to see if device is in LIMP mode */
+ if (MCF_CCM_MISCCR & MCF_CCM_MISCCR_LIMP) {
+ divider = MCF_CCM_CDR & MCF_CCM_CDR_LPDIV(0xF);
+ return (FREF/(2 << divider));
+ }
+ else
+ return ((FREF * MCF_PLL_PFDR) / (BUSDIV * 4));
+}
diff --git a/arch/m68k/platform/coldfire/m5407.c b/arch/m68k/platform/coldfire/m5407.c
new file mode 100644
index 000000000000..faa6680b3404
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m5407.c
@@ -0,0 +1,42 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5407/config.c
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 2000, Lineo (www.lineo.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(PP, 0, 16, MCFSIM_PADDR, MCFSIM_PADAT, MCFSIM_PADAT),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+
+ /* Only support the external interrupts on their primary level */
+ mcf_mapirq2imr(25, MCFINTC_EINT1);
+ mcf_mapirq2imr(27, MCFINTC_EINT3);
+ mcf_mapirq2imr(29, MCFINTC_EINT5);
+ mcf_mapirq2imr(31, MCFINTC_EINT7);
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/m54xx.c b/arch/m68k/platform/coldfire/m54xx.c
new file mode 100644
index 000000000000..20672dadb252
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m54xx.c
@@ -0,0 +1,112 @@
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/54xx/config.c
+ *
+ * Copyright (C) 2010, Philippe De Muyter <phdm@macqel.be>
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <asm/pgalloc.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/m54xxsim.h>
+#include <asm/mcfuart.h>
+#include <asm/m54xxgpt.h>
+#include <asm/mcfgpio.h>
+#ifdef CONFIG_MMU
+#include <asm/mmu_context.h>
+#endif
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = { };
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+static void __init m54xx_uarts_init(void)
+{
+ /* enable io pins */
+ __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
+ MCF_MBAR + MCF_PAR_PSC(0));
+ __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS,
+ MCF_MBAR + MCF_PAR_PSC(1));
+ __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS |
+ MCF_PAR_PSC_CTS_CTS, MCF_MBAR + MCF_PAR_PSC(2));
+ __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD,
+ MCF_MBAR + MCF_PAR_PSC(3));
+}
+
+/***************************************************************************/
+
+static void mcf54xx_reset(void)
+{
+ /* disable interrupts and enable the watchdog */
+ asm("movew #0x2700, %sr\n");
+ __raw_writel(0, MCF_MBAR + MCF_GPT_GMS0);
+ __raw_writel(MCF_GPT_GCIR_CNT(1), MCF_MBAR + MCF_GPT_GCIR0);
+ __raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4),
+ MCF_MBAR + MCF_GPT_GMS0);
+}
+
+/***************************************************************************/
+
+#ifdef CONFIG_MMU
+
+unsigned long num_pages;
+
+static void __init mcf54xx_bootmem_alloc(void)
+{
+ unsigned long start_pfn;
+ unsigned long memstart;
+
+ /* _rambase and _ramend will be naturally page aligned */
+ m68k_memory[0].addr = _rambase;
+ m68k_memory[0].size = _ramend - _rambase;
+
+ /* compute total pages in system */
+ num_pages = (_ramend - _rambase) >> PAGE_SHIFT;
+
+ /* page numbers */
+ memstart = PAGE_ALIGN(_ramstart);
+ min_low_pfn = _rambase >> PAGE_SHIFT;
+ start_pfn = memstart >> PAGE_SHIFT;
+ max_low_pfn = _ramend >> PAGE_SHIFT;
+ high_memory = (void *)_ramend;
+
+ m68k_virt_to_node_shift = fls(_ramend - _rambase - 1) - 6;
+ module_fixup(NULL, __start_fixup, __stop_fixup);
+
+ /* setup bootmem data */
+ m68k_setup_node(0);
+ memstart += init_bootmem_node(NODE_DATA(0), start_pfn,
+ min_low_pfn, max_low_pfn);
+ free_bootmem_node(NODE_DATA(0), memstart, _ramend - memstart);
+}
+
+#endif /* CONFIG_MMU */
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+#ifdef CONFIG_MMU
+ mcf54xx_bootmem_alloc();
+ mmu_context_init();
+#endif
+ mach_reset = mcf54xx_reset;
+ mach_sched_init = hw_timer_init;
+ m54xx_uarts_init();
+}
+
+/***************************************************************************/
diff --git a/arch/m68k/platform/coldfire/nettel.c b/arch/m68k/platform/coldfire/nettel.c
new file mode 100644
index 000000000000..e925ea4602f8
--- /dev/null
+++ b/arch/m68k/platform/coldfire/nettel.c
@@ -0,0 +1,153 @@
+/***************************************************************************/
+
+/*
+ * nettel.c -- startup code support for the NETtel boards
+ *
+ * Copyright (C) 2009, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/nettel.h>
+
+/***************************************************************************/
+
+/*
+ * Define the IO and interrupt resources of the 2 SMC9196 interfaces.
+ */
+#define NETTEL_SMC0_ADDR 0x30600300
+#define NETTEL_SMC0_IRQ 29
+
+#define NETTEL_SMC1_ADDR 0x30600000
+#define NETTEL_SMC1_IRQ 27
+
+/*
+ * We need some access into the SMC9196 registers. Define those registers
+ * we will need here (including the smc91x.h doesn't seem to give us these
+ * in a simple form).
+ */
+#define SMC91xx_BANKSELECT 14
+#define SMC91xx_BASEADDR 2
+#define SMC91xx_BASEMAC 4
+
+/***************************************************************************/
+
+static struct resource nettel_smc91x_0_resources[] = {
+ {
+ .start = NETTEL_SMC0_ADDR,
+ .end = NETTEL_SMC0_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NETTEL_SMC0_IRQ,
+ .end = NETTEL_SMC0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource nettel_smc91x_1_resources[] = {
+ {
+ .start = NETTEL_SMC1_ADDR,
+ .end = NETTEL_SMC1_ADDR + 0x20,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = NETTEL_SMC1_IRQ,
+ .end = NETTEL_SMC1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device nettel_smc91x[] = {
+ {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(nettel_smc91x_0_resources),
+ .resource = nettel_smc91x_0_resources,
+ },
+ {
+ .name = "smc91x",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(nettel_smc91x_1_resources),
+ .resource = nettel_smc91x_1_resources,
+ },
+};
+
+static struct platform_device *nettel_devices[] __initdata = {
+ &nettel_smc91x[0],
+ &nettel_smc91x[1],
+};
+
+/***************************************************************************/
+
+static u8 nettel_macdefault[] __initdata = {
+ 0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01,
+};
+
+/*
+ * Set flash contained MAC address into SMC9196 core. Make sure the flash
+ * MAC address is sane, and not an empty flash. If no good use the Moreton
+ * Bay default MAC address instead.
+ */
+
+static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flashaddr)
+{
+ u16 *macp;
+
+ macp = (u16 *) flashaddr;
+ if ((macp[0] == 0xffff) && (macp[1] == 0xffff) && (macp[2] == 0xffff))
+ macp = (u16 *) &nettel_macdefault[0];
+
+ writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+ writew(macp[0], ioaddr + SMC91xx_BASEMAC);
+ writew(macp[1], ioaddr + SMC91xx_BASEMAC + 2);
+ writew(macp[2], ioaddr + SMC91xx_BASEMAC + 4);
+}
+
+/***************************************************************************/
+
+/*
+ * Re-map the address space of at least one of the SMC ethernet
+ * parts. Both parts power up decoding the same address, so we
+ * need to move one of them first, before doing anything else.
+ */
+
+static void __init nettel_smc91x_init(void)
+{
+ writew(0x00ec, MCF_MBAR + MCFSIM_PADDR);
+ mcf_setppdata(0, 0x0080);
+ writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT);
+ writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR);
+ mcf_setppdata(0x0080, 0);
+
+ /* Set correct chip select timing for SMC9196 accesses */
+ writew(0x1180, MCF_MBAR + MCFSIM_CSCR3);
+
+ /* Set the SMC interrupts to be auto-vectored */
+ mcf_autovector(NETTEL_SMC0_IRQ);
+ mcf_autovector(NETTEL_SMC1_IRQ);
+
+ /* Set MAC addresses from flash for both interfaces */
+ nettel_smc91x_setmac(NETTEL_SMC0_ADDR, 0xf0006000);
+ nettel_smc91x_setmac(NETTEL_SMC1_ADDR, 0xf0006006);
+}
+
+/***************************************************************************/
+
+static int __init init_nettel(void)
+{
+ nettel_smc91x_init();
+ platform_add_devices(nettel_devices, ARRAY_SIZE(nettel_devices));
+ return 0;
+}
+
+arch_initcall(init_nettel);
+
+/***************************************************************************/
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-31 18:17:59 +0300