diff options
Diffstat (limited to 'arch/ia64/Kconfig')
| -rw-r--r-- | arch/ia64/Kconfig | 420 |
1 files changed, 420 insertions, 0 deletions
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig new file mode 100644 index 000000000000..33fcb205fcb7 --- /dev/null +++ b/arch/ia64/Kconfig @@ -0,0 +1,420 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +mainmenu "IA-64 Linux Kernel Configuration" + +source "init/Kconfig" + +menu "Processor type and features" + +config IA64 + bool + default y + help + The Itanium Processor Family is Intel's 64-bit successor to + the 32-bit X86 line. The IA-64 Linux project has a home + page at <http://www.linuxia64.org/> and a mailing list at + <linux-ia64@vger.kernel.org>. + +config 64BIT + bool + default y + +config MMU + bool + default y + +config RWSEM_XCHGADD_ALGORITHM + bool + default y + +config GENERIC_CALIBRATE_DELAY + bool + default y + +config TIME_INTERPOLATION + bool + default y + +config EFI + bool + default y + +config GENERIC_IOMAP + bool + default y + +choice + prompt "System type" + default IA64_GENERIC + +config IA64_GENERIC + bool "generic" + select NUMA + select ACPI_NUMA + select VIRTUAL_MEM_MAP + select DISCONTIGMEM + help + This selects the system type of your hardware. A "generic" kernel + will run on any supported IA-64 system. However, if you configure + a kernel for your specific system, it will be faster and smaller. + + generic For any supported IA-64 system + DIG-compliant For DIG ("Developer's Interface Guide") compliant systems + HP-zx1/sx1000 For HP systems + HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices. + SGI-SN2 For SGI Altix systems + Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/> + + If you don't know what to do, choose "generic". + +config IA64_DIG + bool "DIG-compliant" + +config IA64_HP_ZX1 + bool "HP-zx1/sx1000" + help + Build a kernel that runs on HP zx1 and sx1000 systems. This adds + support for the HP I/O MMU. + +config IA64_HP_ZX1_SWIOTLB + bool "HP-zx1/sx1000 with software I/O TLB" + help + Build a kernel that runs on HP zx1 and sx1000 systems even when they + have broken PCI devices which cannot DMA to full 32 bits. Apart + from support for the HP I/O MMU, this includes support for the software + I/O TLB, which allows supporting the broken devices at the expense of + wasting some kernel memory (about 2MB by default). + +config IA64_SGI_SN2 + bool "SGI-SN2" + help + Selecting this option will optimize the kernel for use on sn2 based + systems, but the resulting kernel binary will not run on other + types of ia64 systems. If you have an SGI Altix system, it's safe + to select this option. If in doubt, select ia64 generic support + instead. + +config IA64_HP_SIM + bool "Ski-simulator" + +endchoice + +choice + prompt "Processor type" + default ITANIUM + +config ITANIUM + bool "Itanium" + help + Select your IA-64 processor type. The default is Itanium. + This choice is safe for all IA-64 systems, but may not perform + optimally on systems with, say, Itanium 2 or newer processors. + +config MCKINLEY + bool "Itanium 2" + help + Select this to configure for an Itanium 2 (McKinley) processor. + +endchoice + +choice + prompt "Kernel page size" + default IA64_PAGE_SIZE_16KB + +config IA64_PAGE_SIZE_4KB + bool "4KB" + help + This lets you select the page size of the kernel. For best IA-64 + performance, a page size of 8KB or 16KB is recommended. For best + IA-32 compatibility, a page size of 4KB should be selected (the vast + majority of IA-32 binaries work perfectly fine with a larger page + size). For Itanium 2 or newer systems, a page size of 64KB can also + be selected. + + 4KB For best IA-32 compatibility + 8KB For best IA-64 performance + 16KB For best IA-64 performance + 64KB Requires Itanium 2 or newer processor. + + If you don't know what to do, choose 16KB. + +config IA64_PAGE_SIZE_8KB + bool "8KB" + +config IA64_PAGE_SIZE_16KB + bool "16KB" + +config IA64_PAGE_SIZE_64KB + depends on !ITANIUM + bool "64KB" + +endchoice + +config IA64_BRL_EMU + bool + depends on ITANIUM + default y + +# align cache-sensitive data to 128 bytes +config IA64_L1_CACHE_SHIFT + int + default "7" if MCKINLEY + default "6" if ITANIUM + +# align cache-sensitive data to 64 bytes +config NUMA + bool "NUMA support" + depends on !IA64_HP_SIM + default y if IA64_SGI_SN2 + select ACPI_NUMA + help + Say Y to compile the kernel to support NUMA (Non-Uniform Memory + Access). This option is for configuring high-end multiprocessor + server systems. If in doubt, say N. + +config VIRTUAL_MEM_MAP + bool "Virtual mem map" + default y if !IA64_HP_SIM + help + Say Y to compile the kernel with support for a virtual mem map. + This code also only takes effect if a memory hole of greater than + 1 Gb is found during boot. You must turn this option on if you + require the DISCONTIGMEM option for your machine. If you are + unsure, say Y. + +config HOLES_IN_ZONE + bool + default y if VIRTUAL_MEM_MAP + +config DISCONTIGMEM + bool "Discontiguous memory support" + depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP + default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA + help + Say Y to support efficient handling of discontiguous physical memory, + for architectures which are either NUMA (Non-Uniform Memory Access) + or have huge holes in the physical address space for other reasons. + See <file:Documentation/vm/numa> for more. + +config IA64_CYCLONE + bool "Cyclone (EXA) Time Source support" + help + Say Y here to enable support for IBM EXA Cyclone time source. + If you're unsure, answer N. + +config IOSAPIC + bool + depends on !IA64_HP_SIM + default y + +config IA64_SGI_SN_SIM + bool "SGI Medusa Simulator Support" + depends on IA64_SGI_SN2 + help + If you are compiling a kernel that will run under SGI's IA-64 + simulator (Medusa) then say Y, otherwise say N. + +config FORCE_MAX_ZONEORDER + int + default "18" + +config SMP + bool "Symmetric multi-processing support" + help + This enables support for systems with more than one CPU. If you have + a system with only one CPU, say N. If you have a system with more + than one CPU, say Y. + + If you say N here, the kernel will run on single and multiprocessor + systems, but will use only one CPU of a multiprocessor system. If + you say Y here, the kernel will run on many, but not all, + single processor systems. On a single processor system, the kernel + will run faster if you say N here. + + See also the <file:Documentation/smp.txt> and the SMP-HOWTO + available at <http://www.tldp.org/docs.html#howto>. + + If you don't know what to do here, say N. + +config NR_CPUS + int "Maximum number of CPUs (2-512)" + range 2 512 + depends on SMP + default "64" + help + You should set this to the number of CPUs in your system, but + keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but + only use 2 CPUs on a >2 CPU system. Setting this to a value larger + than 64 will cause the use of a CPU mask array, causing a small + performance hit. + +config HOTPLUG_CPU + bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" + depends on SMP && EXPERIMENTAL + select HOTPLUG + default n + ---help--- + Say Y here to experiment with turning CPUs off and on. CPUs + can be controlled through /sys/devices/system/cpu/cpu#. + Say N if you want to disable CPU hotplug. + +config PREEMPT + bool "Preemptible Kernel" + help + This option reduces the latency of the kernel when reacting to + real-time or interactive events by allowing a low priority process to + be preempted even if it is in kernel mode executing a system call. + This allows applications to run more reliably even when the system is + under load. + + Say Y here if you are building a kernel for a desktop, embedded + or real-time system. Say N if you are unsure. + +config HAVE_DEC_LOCK + bool + depends on (SMP || PREEMPT) + default y + +config IA32_SUPPORT + bool "Support for Linux/x86 binaries" + help + IA-64 processors can execute IA-32 (X86) instructions. By + saying Y here, the kernel will include IA-32 system call + emulation support which makes it possible to transparently + run IA-32 Linux binaries on an IA-64 Linux system. + If in doubt, say Y. + +config COMPAT + bool + depends on IA32_SUPPORT + default y + +config IA64_MCA_RECOVERY + tristate "MCA recovery from errors other than TLB." + +config PERFMON + bool "Performance monitor support" + help + Selects whether support for the IA-64 performance monitor hardware + is included in the kernel. This makes some kernel data-structures a + little bigger and slows down execution a bit, but it is generally + a good idea to turn this on. If you're unsure, say Y. + +config IA64_PALINFO + tristate "/proc/pal support" + help + If you say Y here, you are able to get PAL (Processor Abstraction + Layer) information in /proc/pal. This contains useful information + about the processors in your systems, such as cache and TLB sizes + and the PAL firmware version in use. + + To use this option, you have to ensure that the "/proc file system + support" (CONFIG_PROC_FS) is enabled, too. + +config ACPI_DEALLOCATE_IRQ + bool + depends on IOSAPIC && EXPERIMENTAL + default y + +source "drivers/firmware/Kconfig" + +source "fs/Kconfig.binfmt" + +endmenu + +menu "Power management and ACPI" + +config PM + bool "Power Management support" + depends on IA64_GENERIC || IA64_DIG || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB + default y + help + "Power Management" means that parts of your computer are shut + off or put into a power conserving "sleep" mode if they are not + being used. There are two competing standards for doing this: APM + and ACPI. If you want to use either one, say Y here and then also + to the requisite support below. + + Power Management is most important for battery powered laptop + computers; if you have a laptop, check out the Linux Laptop home + page on the WWW at <http://www.linux-on-laptops.com/> and the + Battery Powered Linux mini-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that, even if you say N here, Linux on the x86 architecture + will issue the hlt instruction if nothing is to be done, thereby + sending the processor to sleep and saving power. + +config ACPI + bool + depends on !IA64_HP_SIM + default y + +if !IA64_HP_SIM + +source "drivers/acpi/Kconfig" + +endif + +endmenu + +if !IA64_HP_SIM + +menu "Bus options (PCI, PCMCIA)" + +config PCI + bool "PCI support" + help + Find out whether you have a PCI motherboard. PCI is the name of a + bus system, i.e. the way the CPU talks to the other stuff inside + your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or + VESA. If you have PCI, say Y, otherwise N. + + The PCI-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, contains valuable + information about which PCI hardware does work under Linux and which + doesn't. + +config PCI_DOMAINS + bool + default PCI + +source "drivers/pci/Kconfig" + +source "drivers/pci/hotplug/Kconfig" + +source "drivers/pcmcia/Kconfig" + +endmenu + +endif + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "lib/Kconfig" + +# +# Use the generic interrupt handling code in kernel/irq/: +# +config GENERIC_HARDIRQS + bool + default y + +config GENERIC_IRQ_PROBE + bool + default y + +source "arch/ia64/hp/sim/Kconfig" + +source "arch/ia64/oprofile/Kconfig" + +source "arch/ia64/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" |