diff options
Diffstat (limited to 'arch/frv')
206 files changed, 0 insertions, 27155 deletions
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig deleted file mode 100644 index af369b05fed5..000000000000 --- a/arch/frv/Kconfig +++ /dev/null @@ -1,386 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config FRV - bool - default y - select HAVE_IDE - select HAVE_ARCH_TRACEHOOK - select HAVE_PERF_EVENTS - select HAVE_UID16 - select VIRT_TO_BUS - select GENERIC_IRQ_SHOW - select HAVE_DEBUG_BUGVERBOSE - select ARCH_HAVE_NMI_SAFE_CMPXCHG - select GENERIC_CPU_DEVICES - select ARCH_HAS_DEVMEM_IS_ALLOWED - select ARCH_WANT_IPC_PARSE_VERSION - select OLD_SIGSUSPEND3 - select OLD_SIGACTION - select HAVE_DEBUG_STACKOVERFLOW - select ARCH_NO_COHERENT_DMA_MMAP - -config CPU_BIG_ENDIAN - def_bool y - -config ZONE_DMA - bool - default y - -config RWSEM_GENERIC_SPINLOCK - bool - default y - -config RWSEM_XCHGADD_ALGORITHM - bool - -config GENERIC_HWEIGHT - bool - default y - -config GENERIC_CALIBRATE_DELAY - bool - default n - -config TIME_LOW_RES - bool - default y - -config QUICKLIST - bool - default y - -config ARCH_HAS_ILOG2_U32 - bool - default y - -config ARCH_HAS_ILOG2_U64 - bool - default y - -config HZ - int - default 1000 - -source "init/Kconfig" - -source "kernel/Kconfig.freezer" - - -menu "Fujitsu FR-V system setup" - -config MMU - bool "MMU support" - help - This options switches on and off support for the FR-V MMU - (effectively switching between vmlinux and uClinux). Not all FR-V - CPUs support this. Currently only the FR451 has a sufficiently - featured MMU. - -config FRV_OUTOFLINE_ATOMIC_OPS - bool "Out-of-line the FRV atomic operations" - default n - help - Setting this option causes the FR-V atomic operations to be mostly - implemented out-of-line. - - See Documentation/frv/atomic-ops.txt for more information. - -config HIGHMEM - bool "High memory support" - depends on MMU - default y - help - If you wish to use more than 256MB of memory with your MMU based - system, you will need to select this option. The kernel can only see - the memory between 0xC0000000 and 0xD0000000 directly... everything - else must be kmapped. - - The arch is, however, capable of supporting up to 3GB of SDRAM. - -config HIGHPTE - bool "Allocate page tables in highmem" - depends on HIGHMEM - default y - help - The VM uses one page of memory for each page table. For systems - with a lot of RAM, this can be wasteful of precious low memory. - Setting this option will put user-space page tables in high memory. - -source "mm/Kconfig" - -choice - prompt "uClinux kernel load address" - depends on !MMU - default UCPAGE_OFFSET_C0000000 - help - This option sets the base address for the uClinux kernel. The kernel - will rearrange the SDRAM layout to start at this address, and move - itself to start there. It must be greater than 0, and it must be - sufficiently less than 0xE0000000 that the SDRAM does not intersect - the I/O region. - - The base address must also be aligned such that the SDRAM controller - can decode it. For instance, a 512MB SDRAM bank must be 512MB aligned. - -config UCPAGE_OFFSET_20000000 - bool "0x20000000" - -config UCPAGE_OFFSET_40000000 - bool "0x40000000" - -config UCPAGE_OFFSET_60000000 - bool "0x60000000" - -config UCPAGE_OFFSET_80000000 - bool "0x80000000" - -config UCPAGE_OFFSET_A0000000 - bool "0xA0000000" - -config UCPAGE_OFFSET_C0000000 - bool "0xC0000000 (Recommended)" - -endchoice - -config PAGE_OFFSET - hex - default 0x20000000 if UCPAGE_OFFSET_20000000 - default 0x40000000 if UCPAGE_OFFSET_40000000 - default 0x60000000 if UCPAGE_OFFSET_60000000 - default 0x80000000 if UCPAGE_OFFSET_80000000 - default 0xA0000000 if UCPAGE_OFFSET_A0000000 - default 0xC0000000 - -config PROTECT_KERNEL - bool "Protect core kernel against userspace" - depends on !MMU - default y - help - Selecting this option causes the uClinux kernel to change the - permittivity of DAMPR register covering the core kernel image to - prevent userspace accessing the underlying memory directly. - -choice - prompt "CPU Caching mode" - default FRV_DEFL_CACHE_WBACK - help - This option determines the default caching mode for the kernel. - - Write-Back caching mode involves the all reads and writes causing - the affected cacheline to be read into the cache first before being - operated upon. Memory is not then updated by a write until the cache - is filled and a cacheline needs to be displaced from the cache to - make room. Only at that point is it written back. - - Write-Behind caching is similar to Write-Back caching, except that a - write won't fetch a cacheline into the cache if there isn't already - one there; it will write directly to memory instead. - - Write-Through caching only fetches cachelines from memory on a - read. Writes always get written directly to memory. If the affected - cacheline is also in cache, it will be updated too. - - The final option is to turn of caching entirely. - - Note that not all CPUs support Write-Behind caching. If the CPU on - which the kernel is running doesn't, it'll fall back to Write-Back - caching. - -config FRV_DEFL_CACHE_WBACK - bool "Write-Back" - -config FRV_DEFL_CACHE_WBEHIND - bool "Write-Behind" - -config FRV_DEFL_CACHE_WTHRU - bool "Write-Through" - -config FRV_DEFL_CACHE_DISABLED - bool "Disabled" - -endchoice - -menu "CPU core support" - -config CPU_FR401 - bool "Include FR401 core support" - depends on !MMU - default y - help - This enables support for the FR401, FR401A and FR403 CPUs - -config CPU_FR405 - bool "Include FR405 core support" - depends on !MMU - default y - help - This enables support for the FR405 CPU - -config CPU_FR451 - bool "Include FR451 core support" - default y - help - This enables support for the FR451 CPU - -config CPU_FR451_COMPILE - bool "Specifically compile for FR451 core" - depends on CPU_FR451 && !CPU_FR401 && !CPU_FR405 && !CPU_FR551 - default y - help - This causes appropriate flags to be passed to the compiler to - optimise for the FR451 CPU - -config CPU_FR551 - bool "Include FR551 core support" - depends on !MMU - default y - help - This enables support for the FR555 CPU - -config CPU_FR551_COMPILE - bool "Specifically compile for FR551 core" - depends on CPU_FR551 && !CPU_FR401 && !CPU_FR405 && !CPU_FR451 - default y - help - This causes appropriate flags to be passed to the compiler to - optimise for the FR555 CPU - -config FRV_L1_CACHE_SHIFT - int - default "5" if CPU_FR401 || CPU_FR405 || CPU_FR451 - default "6" if CPU_FR551 - -endmenu - -choice - prompt "System support" - default MB93091_VDK - -config MB93091_VDK - bool "MB93091 CPU board with or without motherboard" - -config MB93093_PDK - bool "MB93093 PDK unit" - -endchoice - -if MB93091_VDK -choice - prompt "Motherboard support" - default MB93090_MB00 - -config MB93090_MB00 - bool "Use the MB93090-MB00 motherboard" - help - Select this option if the MB93091 CPU board is going to be used with - a MB93090-MB00 VDK motherboard - -config MB93091_NO_MB - bool "Use standalone" - help - Select this option if the MB93091 CPU board is going to be used - without a motherboard - -endchoice -endif - -config FUJITSU_MB93493 - bool "MB93493 Multimedia chip" - help - Select this option if the MB93493 multimedia chip is going to be - used. - -choice - prompt "GP-Relative data support" - default GPREL_DATA_8 - help - This option controls what data, if any, should be placed in the GP - relative data sections. Using this means that the compiler can - generate accesses to the data using GR16-relative addressing which - is faster than absolute instructions and saves space (2 instructions - per access). - - However, the GPREL region is limited in size because the immediate - value used in the load and store instructions is limited to a 12-bit - signed number. - - So if the linker starts complaining that accesses to GPREL data are - out of range, try changing this option from the default. - - Note that modules will always be compiled with this feature disabled - as the module data will not be in range of the GP base address. - -config GPREL_DATA_8 - bool "Put data objects of up to 8 bytes into GP-REL" - -config GPREL_DATA_4 - bool "Put data objects of up to 4 bytes into GP-REL" - -config GPREL_DATA_NONE - bool "Don't use GP-REL" - -endchoice - -config FRV_ONCPU_SERIAL - bool "Use on-CPU serial ports" - select SERIAL_8250 - default y - -config PCI - bool "Use PCI" - depends on MB93090_MB00 - default y - select GENERIC_PCI_IOMAP - help - Some FR-V systems (such as the MB93090-MB00 VDK) have PCI - onboard. If you have one of these boards and you wish to use the PCI - facilities, say Y here. - -config RESERVE_DMA_COHERENT - bool "Reserve DMA coherent memory" - depends on PCI && !MMU - default y - help - Many PCI drivers require access to uncached memory for DMA device - communications (such as is done with some Ethernet buffer rings). If - a fully featured MMU is available, this can be done through page - table settings, but if not, a region has to be set aside and marked - with a special DAMPR register. - - Setting this option causes uClinux to set aside a portion of the - available memory for use in this manner. The memory will then be - unavailable for normal kernel use. - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -menu "Power management options" - -config ARCH_SUSPEND_POSSIBLE - def_bool y - -source kernel/power/Kconfig -endmenu - -endmenu - - -menu "Executable formats" - -source "fs/Kconfig.binfmt" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -source "arch/frv/Kconfig.debug" - -source "security/Kconfig" - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/frv/Kconfig.debug b/arch/frv/Kconfig.debug deleted file mode 100644 index ecab6d8a79ed..000000000000 --- a/arch/frv/Kconfig.debug +++ /dev/null @@ -1,49 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -menu "Kernel hacking" - -source "lib/Kconfig.debug" - -config GDBSTUB - bool "Remote GDB kernel debugging" - depends on DEBUG_KERNEL - select DEBUG_INFO - select FRAME_POINTER - help - If you say Y here, it will be possible to remotely debug the kernel - using gdb. This enlarges your kernel ELF image disk size by several - megabytes and requires a machine with more than 16 MB, better 32 MB - RAM to avoid excessive linking time. This is only useful for kernel - hackers. If unsure, say N. - -choice - prompt "GDB stub port" - default GDBSTUB_UART1 - depends on GDBSTUB - help - Select the on-CPU port used for GDB-stub - -config GDBSTUB_UART0 - bool "/dev/ttyS0" - -config GDBSTUB_UART1 - bool "/dev/ttyS1" - -endchoice - -config GDBSTUB_IMMEDIATE - bool "Break into GDB stub immediately" - depends on GDBSTUB - help - If you say Y here, GDB stub will break into the program as soon as - possible, leaving the program counter at the beginning of - start_kernel() in init/main.c. - -config GDB_CONSOLE - bool "Console output to GDB" - depends on GDBSTUB - help - If you are using GDB for remote debugging over a serial port and - would like kernel messages to be formatted into GDB $O packets so - that GDB prints them as program output, say 'Y'. - -endmenu diff --git a/arch/frv/Makefile b/arch/frv/Makefile deleted file mode 100644 index 2a8fb730d1ca..000000000000 --- a/arch/frv/Makefile +++ /dev/null @@ -1,90 +0,0 @@ -# -# frv/Makefile -# -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (c) 2003, 2004 Red Hat Inc. -# - Written by David Howells <dhowells@redhat.com> -# - Derived from arch/m68knommu/Makefile, -# Copyright (c) 1999,2001 D. Jeff Dionne <jeff@lineo.ca>, -# Rt-Control Inc. / Lineo, Inc. -# -# Copyright (C) 1998,1999 D. Jeff Dionne <jeff@uclinux.org>, -# Kenneth Albanowski <kjahds@kjahds.com>, -# -# Based on arch/m68k/Makefile: -# Copyright (C) 1994 by Hamish Macdonald -# - -ifdef CONFIG_MMU -UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\" -else -UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\" -endif - -KBUILD_AFLAGS_MODULE += -G0 -mlong-calls -KBUILD_CFLAGS_MODULE += -G0 -mlong-calls - -ifdef CONFIG_GPREL_DATA_8 -KBUILD_CFLAGS += -G8 -else -ifdef CONFIG_GPREL_DATA_4 -KBUILD_CFLAGS += -G4 -else -ifdef CONFIG_GPREL_DATA_NONE -KBUILD_CFLAGS += -G0 -endif -endif -endif - -#LDFLAGS_vmlinux := -Map linkmap.txt - -ifdef CONFIG_GC_SECTIONS -KBUILD_CFLAGS += -ffunction-sections -fdata-sections -endif - -ifndef CONFIG_FRAME_POINTER -KBUILD_CFLAGS += -mno-linked-fp -endif - -ifdef CONFIG_CPU_FR451_COMPILE -KBUILD_CFLAGS += -mcpu=fr450 -KBUILD_AFLAGS += -mcpu=fr450 -else -ifdef CONFIG_CPU_FR551_COMPILE -KBUILD_CFLAGS += -mcpu=fr550 -KBUILD_AFLAGS += -mcpu=fr550 -else -KBUILD_CFLAGS += -mcpu=fr400 -KBUILD_AFLAGS += -mcpu=fr400 -endif -endif - -# pretend the kernel is going to run on an FR400 with no media-fp unit -# - reserve CC3 for use with atomic ops -# - all the extra registers are dealt with only at context switch time -KBUILD_CFLAGS += -mno-fdpic -mgpr-32 -msoft-float -mno-media -KBUILD_CFLAGS += -ffixed-fcc3 -ffixed-cc3 -ffixed-gr15 -ffixed-icc2 -KBUILD_AFLAGS += -mno-fdpic - -head-y := arch/frv/kernel/head.o - -core-y += arch/frv/kernel/ arch/frv/mm/ -libs-y += arch/frv/lib/ - -core-$(CONFIG_MB93090_MB00) += arch/frv/mb93090-mb00/ - -all: Image - -Image: vmlinux - $(Q)$(MAKE) $(build)=arch/frv/boot $@ - -archclean: - $(Q)$(MAKE) $(clean)=arch/frv/boot diff --git a/arch/frv/boot/Makefile b/arch/frv/boot/Makefile deleted file mode 100644 index 636d5bbcd53f..000000000000 --- a/arch/frv/boot/Makefile +++ /dev/null @@ -1,76 +0,0 @@ -# -# arch/arm/boot/Makefile -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1995-2000 Russell King -# - -targets := Image zImage bootpImage - -SYSTEM =$(LINUX) - -ZTEXTADDR = 0x02080000 -PARAMS_PHYS = 0x0207c000 -INITRD_PHYS = 0x02180000 -INITRD_VIRT = 0x02180000 - -OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment - -# -# If you don't define ZRELADDR above, -# then it defaults to ZTEXTADDR -# -ifeq ($(ZRELADDR),) -ZRELADDR = $(ZTEXTADDR) -endif - -export SYSTEM ZTEXTADDR ZBSSADDR ZRELADDR INITRD_PHYS INITRD_VIRT PARAMS_PHYS - -Image: $(obj)/Image - -targets: $(obj)/Image - -$(obj)/Image: vmlinux FORCE - $(OBJCOPY) $(OBJCOPYFLAGS) -S vmlinux $@ - -#$(obj)/Image: $(CONFIGURE) $(SYSTEM) -# $(OBJCOPY) $(OBJCOPYFLAGS) -g -S $(SYSTEM) $@ - -bzImage: zImage - -zImage: $(CONFIGURE) compressed/$(LINUX) - $(OBJCOPY) $(OBJCOPYFLAGS) -S compressed/$(LINUX) $@ - -bootpImage: bootp/bootp - $(OBJCOPY) $(OBJCOPYFLAGS) -S bootp/bootp $@ - -compressed/$(LINUX): $(LINUX) dep - @$(MAKE) -C compressed $(LINUX) - -bootp/bootp: zImage initrd - @$(MAKE) -C bootp bootp - -initrd: - @test "$(INITRD_VIRT)" != "" || (echo This architecture does not support INITRD; exit -1) - @test "$(INITRD)" != "" || (echo You must specify INITRD; exit -1) - -# -# installation -# -install: $(CONFIGURE) Image - sh ./install.sh $(KERNELRELEASE) Image System.map "$(INSTALL_PATH)" - -zinstall: $(CONFIGURE) zImage - sh ./install.sh $(KERNELRELEASE) zImage System.map "$(INSTALL_PATH)" - -# -# miscellany -# -mrproper clean: -# @$(MAKE) -C compressed clean -# @$(MAKE) -C bootp clean - -dep: diff --git a/arch/frv/defconfig b/arch/frv/defconfig deleted file mode 100644 index b1b792610fdf..000000000000 --- a/arch/frv/defconfig +++ /dev/null @@ -1,39 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -# CONFIG_HOTPLUG is not set -CONFIG_MMU=y -CONFIG_FRV_OUTOFLINE_ATOMIC_OPS=y -CONFIG_FRV_DEFL_CACHE_WTHRU=y -CONFIG_GPREL_DATA_4=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_IPV6 is not set -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_NET_PCI=y -CONFIG_NE2K_PCI=y -# CONFIG_INPUT is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=1 -CONFIG_SERIAL_8250_RUNTIME_UARTS=1 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_TMPFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_STACKOVERFLOW=y diff --git a/arch/frv/include/asm/Kbuild b/arch/frv/include/asm/Kbuild deleted file mode 100644 index b16b9c48ea09..000000000000 --- a/arch/frv/include/asm/Kbuild +++ /dev/null @@ -1,12 +0,0 @@ - -generic-y += device.h -generic-y += exec.h -generic-y += extable.h -generic-y += fb.h -generic-y += irq_work.h -generic-y += mcs_spinlock.h -generic-y += mm-arch-hooks.h -generic-y += preempt.h -generic-y += trace_clock.h -generic-y += word-at-a-time.h -generic-y += kprobes.h diff --git a/arch/frv/include/asm/asm-offsets.h b/arch/frv/include/asm/asm-offsets.h deleted file mode 100644 index d370ee36a182..000000000000 --- a/arch/frv/include/asm/asm-offsets.h +++ /dev/null @@ -1 +0,0 @@ -#include <generated/asm-offsets.h> diff --git a/arch/frv/include/asm/atomic.h b/arch/frv/include/asm/atomic.h deleted file mode 100644 index e93c9494503a..000000000000 --- a/arch/frv/include/asm/atomic.h +++ /dev/null @@ -1,224 +0,0 @@ -/* atomic.h: atomic operation emulation for FR-V - * - * For an explanation of how atomic ops work in this arch, see: - * Documentation/frv/atomic-ops.txt - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_ATOMIC_H -#define _ASM_ATOMIC_H - -#include <linux/types.h> -#include <asm/cmpxchg.h> -#include <asm/barrier.h> - -#ifdef CONFIG_SMP -#error not SMP safe -#endif - -#include <asm/atomic_defs.h> - -/* - * Atomic operations that C can't guarantee us. Useful for - * resource counting etc.. - * - * We do not have SMP systems, so we don't have to deal with that. - */ - -#define ATOMIC_INIT(i) { (i) } -#define atomic_read(v) READ_ONCE((v)->counter) -#define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i)) - -static inline int atomic_inc_return(atomic_t *v) -{ - return __atomic_add_return(1, &v->counter); -} - -static inline int atomic_dec_return(atomic_t *v) -{ - return __atomic_sub_return(1, &v->counter); -} - -static inline int atomic_add_return(int i, atomic_t *v) -{ - return __atomic_add_return(i, &v->counter); -} - -static inline int atomic_sub_return(int i, atomic_t *v) -{ - return __atomic_sub_return(i, &v->counter); -} - -static inline int atomic_add_negative(int i, atomic_t *v) -{ - return atomic_add_return(i, v) < 0; -} - -static inline void atomic_inc(atomic_t *v) -{ - atomic_inc_return(v); -} - -static inline void atomic_dec(atomic_t *v) -{ - atomic_dec_return(v); -} - -#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) -#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) -#define atomic_inc_and_test(v) (atomic_add_return(1, (v)) == 0) - -/* - * 64-bit atomic ops - */ -typedef struct { - long long counter; -} atomic64_t; - -#define ATOMIC64_INIT(i) { (i) } - -static inline long long atomic64_read(const atomic64_t *v) -{ - long long counter; - - asm("ldd%I1 %M1,%0" - : "=e"(counter) - : "m"(v->counter)); - - return counter; -} - -static inline void atomic64_set(atomic64_t *v, long long i) -{ - asm volatile("std%I0 %1,%M0" - : "=m"(v->counter) - : "e"(i)); -} - -static inline long long atomic64_inc_return(atomic64_t *v) -{ - return __atomic64_add_return(1, &v->counter); -} - -static inline long long atomic64_dec_return(atomic64_t *v) -{ - return __atomic64_sub_return(1, &v->counter); -} - -static inline long long atomic64_add_return(long long i, atomic64_t *v) -{ - return __atomic64_add_return(i, &v->counter); -} - -static inline long long atomic64_sub_return(long long i, atomic64_t *v) -{ - return __atomic64_sub_return(i, &v->counter); -} - -static inline long long atomic64_add_negative(long long i, atomic64_t *v) -{ - return atomic64_add_return(i, v) < 0; -} - -static inline void atomic64_inc(atomic64_t *v) -{ - atomic64_inc_return(v); -} - -static inline void atomic64_dec(atomic64_t *v) -{ - atomic64_dec_return(v); -} - -#define atomic64_sub_and_test(i,v) (atomic64_sub_return((i), (v)) == 0) -#define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) -#define atomic64_inc_and_test(v) (atomic64_inc_return((v)) == 0) -#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) - -#define atomic_cmpxchg(v, old, new) (cmpxchg(&(v)->counter, old, new)) -#define atomic_xchg(v, new) (xchg(&(v)->counter, new)) -#define atomic64_cmpxchg(v, old, new) (__cmpxchg_64(old, new, &(v)->counter)) -#define atomic64_xchg(v, new) (__xchg_64(new, &(v)->counter)) - -static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) -{ - int c, old; - c = atomic_read(v); - for (;;) { - if (unlikely(c == (u))) - break; - old = atomic_cmpxchg((v), c, c + (a)); - if (likely(old == c)) - break; - c = old; - } - return c; -} - -static inline int atomic64_add_unless(atomic64_t *v, long long i, long long u) -{ - long long c, old; - - c = atomic64_read(v); - for (;;) { - if (unlikely(c == u)) - break; - old = atomic64_cmpxchg(v, c, c + i); - if (likely(old == c)) - break; - c = old; - } - return c != u; -} - -static inline long long atomic64_dec_if_positive(atomic64_t *v) -{ - long long c, old, dec; - - c = atomic64_read(v); - for (;;) { - dec = c - 1; - if (unlikely(dec < 0)) - break; - old = atomic64_cmpxchg((v), c, dec); - if (likely(old == c)) - break; - c = old; - } - return dec; -} - -#define ATOMIC_OP(op) \ -static inline int atomic_fetch_##op(int i, atomic_t *v) \ -{ \ - return __atomic32_fetch_##op(i, &v->counter); \ -} \ -static inline void atomic_##op(int i, atomic_t *v) \ -{ \ - (void)__atomic32_fetch_##op(i, &v->counter); \ -} \ - \ -static inline long long atomic64_fetch_##op(long long i, atomic64_t *v) \ -{ \ - return __atomic64_fetch_##op(i, &v->counter); \ -} \ -static inline void atomic64_##op(long long i, atomic64_t *v) \ -{ \ - (void)__atomic64_fetch_##op(i, &v->counter); \ -} - -ATOMIC_OP(or) -ATOMIC_OP(and) -ATOMIC_OP(xor) -ATOMIC_OP(add) -ATOMIC_OP(sub) - -#undef ATOMIC_OP - -#endif /* _ASM_ATOMIC_H */ diff --git a/arch/frv/include/asm/atomic_defs.h b/arch/frv/include/asm/atomic_defs.h deleted file mode 100644 index ce3b8a4efc12..000000000000 --- a/arch/frv/include/asm/atomic_defs.h +++ /dev/null @@ -1,175 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -#include <asm/spr-regs.h> - -#ifdef __ATOMIC_LIB__ - -#ifdef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS - -#define ATOMIC_QUALS -#define ATOMIC_EXPORT(x) EXPORT_SYMBOL(x) - -#else /* !OUTOFLINE && LIB */ - -#define ATOMIC_OP_RETURN(op) -#define ATOMIC_FETCH_OP(op) - -#endif /* OUTOFLINE */ - -#else /* !__ATOMIC_LIB__ */ - -#define ATOMIC_EXPORT(x) - -#ifdef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS - -#define ATOMIC_OP_RETURN(op) \ -extern int __atomic_##op##_return(int i, int *v); \ -extern long long __atomic64_##op##_return(long long i, long long *v); - -#define ATOMIC_FETCH_OP(op) \ -extern int __atomic32_fetch_##op(int i, int *v); \ -extern long long __atomic64_fetch_##op(long long i, long long *v); - -#else /* !OUTOFLINE && !LIB */ - -#define ATOMIC_QUALS static inline - -#endif /* OUTOFLINE */ -#endif /* __ATOMIC_LIB__ */ - - -/* - * Note on the 64 bit inline asm variants... - * - * CSTD is a conditional instruction and needs a constrained memory reference. - * Normally 'U' provides the correct constraints for conditional instructions - * and this is used for the 32 bit version, however 'U' does not appear to work - * for 64 bit values (gcc-4.9) - * - * The exact constraint is that conditional instructions cannot deal with an - * immediate displacement in the memory reference, so what we do is we read the - * address through a volatile cast into a local variable in order to insure we - * _have_ to compute the correct address without displacement. This allows us - * to use the regular 'm' for the memory address. - * - * Furthermore, the %Ln operand, which prints the low word register (r+1), - * really only works for registers, this means we cannot allow immediate values - * for the 64 bit versions -- like we do for the 32 bit ones. - * - */ - -#ifndef ATOMIC_OP_RETURN -#define ATOMIC_OP_RETURN(op) \ -ATOMIC_QUALS int __atomic_##op##_return(int i, int *v) \ -{ \ - int val; \ - \ - asm volatile( \ - "0: \n" \ - " orcc gr0,gr0,gr0,icc3 \n" \ - " ckeq icc3,cc7 \n" \ - " ld.p %M0,%1 \n" \ - " orcr cc7,cc7,cc3 \n" \ - " "#op"%I2 %1,%2,%1 \n" \ - " cst.p %1,%M0 ,cc3,#1 \n" \ - " corcc gr29,gr29,gr0 ,cc3,#1 \n" \ - " beq icc3,#0,0b \n" \ - : "+U"(*v), "=&r"(val) \ - : "NPr"(i) \ - : "memory", "cc7", "cc3", "icc3" \ - ); \ - \ - return val; \ -} \ -ATOMIC_EXPORT(__atomic_##op##_return); \ - \ -ATOMIC_QUALS long long __atomic64_##op##_return(long long i, long long *v) \ -{ \ - long long *__v = READ_ONCE(v); \ - long long val; \ - \ - asm volatile( \ - "0: \n" \ - " orcc gr0,gr0,gr0,icc3 \n" \ - " ckeq icc3,cc7 \n" \ - " ldd.p %M0,%1 \n" \ - " orcr cc7,cc7,cc3 \n" \ - " "#op"cc %L1,%L2,%L1,icc0 \n" \ - " "#op"x %1,%2,%1,icc0 \n" \ - " cstd.p %1,%M0 ,cc3,#1 \n" \ - " corcc gr29,gr29,gr0 ,cc3,#1 \n" \ - " beq icc3,#0,0b \n" \ - : "+m"(*__v), "=&e"(val) \ - : "e"(i) \ - : "memory", "cc7", "cc3", "icc0", "icc3" \ - ); \ - \ - return val; \ -} \ -ATOMIC_EXPORT(__atomic64_##op##_return); -#endif - -#ifndef ATOMIC_FETCH_OP -#define ATOMIC_FETCH_OP(op) \ -ATOMIC_QUALS int __atomic32_fetch_##op(int i, int *v) \ -{ \ - int old, tmp; \ - \ - asm volatile( \ - "0: \n" \ - " orcc gr0,gr0,gr0,icc3 \n" \ - " ckeq icc3,cc7 \n" \ - " ld.p %M0,%1 \n" \ - " orcr cc7,cc7,cc3 \n" \ - " "#op"%I3 %1,%3,%2 \n" \ - " cst.p %2,%M0 ,cc3,#1 \n" \ - " corcc gr29,gr29,gr0 ,cc3,#1 \n" \ - " beq icc3,#0,0b \n" \ - : "+U"(*v), "=&r"(old), "=r"(tmp) \ - : "NPr"(i) \ - : "memory", "cc7", "cc3", "icc3" \ - ); \ - \ - return old; \ -} \ -ATOMIC_EXPORT(__atomic32_fetch_##op); \ - \ -ATOMIC_QUALS long long __atomic64_fetch_##op(long long i, long long *v) \ -{ \ - long long *__v = READ_ONCE(v); \ - long long old, tmp; \ - \ - asm volatile( \ - "0: \n" \ - " orcc gr0,gr0,gr0,icc3 \n" \ - " ckeq icc3,cc7 \n" \ - " ldd.p %M0,%1 \n" \ - " orcr cc7,cc7,cc3 \n" \ - " "#op" %L1,%L3,%L2 \n" \ - " "#op" %1,%3,%2 \n" \ - " cstd.p %2,%M0 ,cc3,#1 \n" \ - " corcc gr29,gr29,gr0 ,cc3,#1 \n" \ - " beq icc3,#0,0b \n" \ - : "+m"(*__v), "=&e"(old), "=e"(tmp) \ - : "e"(i) \ - : "memory", "cc7", "cc3", "icc3" \ - ); \ - \ - return old; \ -} \ -ATOMIC_EXPORT(__atomic64_fetch_##op); -#endif - -ATOMIC_FETCH_OP(or) -ATOMIC_FETCH_OP(and) -ATOMIC_FETCH_OP(xor) -ATOMIC_FETCH_OP(add) -ATOMIC_FETCH_OP(sub) - -ATOMIC_OP_RETURN(add) -ATOMIC_OP_RETURN(sub) - -#undef ATOMIC_FETCH_OP -#undef ATOMIC_OP_RETURN -#undef ATOMIC_QUALS -#undef ATOMIC_EXPORT diff --git a/arch/frv/include/asm/ax88796.h b/arch/frv/include/asm/ax88796.h deleted file mode 100644 index 637e980393c5..000000000000 --- a/arch/frv/include/asm/ax88796.h +++ /dev/null @@ -1,22 +0,0 @@ -/* ax88796.h: access points to the driver for the AX88796 NE2000 clone - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_AX88796_H -#define _ASM_AX88796_H - -#include <asm/mb-regs.h> - -#define AX88796_IOADDR (__region_CS1 + 0x200) -#define AX88796_IRQ IRQ_CPU_EXTERNAL7 -#define AX88796_FULL_DUPLEX 0 /* force full duplex */ -#define AX88796_BUS_INFO "CS1#+0x200" /* bus info for ethtool */ - -#endif /* _ASM_AX88796_H */ diff --git a/arch/frv/include/asm/barrier.h b/arch/frv/include/asm/barrier.h deleted file mode 100644 index abbef470154c..000000000000 --- a/arch/frv/include/asm/barrier.h +++ /dev/null @@ -1,23 +0,0 @@ -/* FR-V CPU memory barrier definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_BARRIER_H -#define _ASM_BARRIER_H - -#define nop() asm volatile ("nop"::) - -#define mb() asm volatile ("membar" : : :"memory") -#define rmb() asm volatile ("membar" : : :"memory") -#define wmb() asm volatile ("membar" : : :"memory") - -#include <asm-generic/barrier.h> - -#endif /* _ASM_BARRIER_H */ diff --git a/arch/frv/include/asm/bitops.h b/arch/frv/include/asm/bitops.h deleted file mode 100644 index 0df8e95e3715..000000000000 --- a/arch/frv/include/asm/bitops.h +++ /dev/null @@ -1,325 +0,0 @@ -/* bitops.h: bit operations for the Fujitsu FR-V CPUs - * - * For an explanation of how atomic ops work in this arch, see: - * Documentation/frv/atomic-ops.txt - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_BITOPS_H -#define _ASM_BITOPS_H - -#include <linux/compiler.h> -#include <asm/byteorder.h> - -#ifdef __KERNEL__ - -#ifndef _LINUX_BITOPS_H -#error only <linux/bitops.h> can be included directly -#endif - -#include <asm-generic/bitops/ffz.h> - -#include <asm/atomic.h> - -static inline int test_and_clear_bit(unsigned long nr, volatile void *addr) -{ - unsigned int *ptr = (void *)addr; - unsigned int mask = 1UL << (nr & 31); - ptr += nr >> 5; - return (__atomic32_fetch_and(~mask, ptr) & mask) != 0; -} - -static inline int test_and_set_bit(unsigned long nr, volatile void *addr) -{ - unsigned int *ptr = (void *)addr; - unsigned int mask = 1UL << (nr & 31); - ptr += nr >> 5; - return (__atomic32_fetch_or(mask, ptr) & mask) != 0; -} - -static inline int test_and_change_bit(unsigned long nr, volatile void *addr) -{ - unsigned int *ptr = (void *)addr; - unsigned int mask = 1UL << (nr & 31); - ptr += nr >> 5; - return (__atomic32_fetch_xor(mask, ptr) & mask) != 0; -} - -static inline void clear_bit(unsigned long nr, volatile void *addr) -{ - test_and_clear_bit(nr, addr); -} - -static inline void set_bit(unsigned long nr, volatile void *addr) -{ - test_and_set_bit(nr, addr); -} - -static inline void change_bit(unsigned long nr, volatile void *addr) -{ - test_and_change_bit(nr, addr); -} - -static inline void __clear_bit(unsigned long nr, volatile void *addr) -{ - volatile unsigned long *a = addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 31); - *a &= ~mask; -} - -static inline void __set_bit(unsigned long nr, volatile void *addr) -{ - volatile unsigned long *a = addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 31); - *a |= mask; -} - -static inline void __change_bit(unsigned long nr, volatile void *addr) -{ - volatile unsigned long *a = addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 31); - *a ^= mask; -} - -static inline int __test_and_clear_bit(unsigned long nr, volatile void *addr) -{ - volatile unsigned long *a = addr; - int mask, retval; - - a += nr >> 5; - mask = 1 << (nr & 31); - retval = (mask & *a) != 0; - *a &= ~mask; - return retval; -} - -static inline int __test_and_set_bit(unsigned long nr, volatile void *addr) -{ - volatile unsigned long *a = addr; - int mask, retval; - - a += nr >> 5; - mask = 1 << (nr & 31); - retval = (mask & *a) != 0; - *a |= mask; - return retval; -} - -static inline int __test_and_change_bit(unsigned long nr, volatile void *addr) -{ - volatile unsigned long *a = addr; - int mask, retval; - - a += nr >> 5; - mask = 1 << (nr & 31); - retval = (mask & *a) != 0; - *a ^= mask; - return retval; -} - -/* - * This routine doesn't need to be atomic. - */ -static inline int -__constant_test_bit(unsigned long nr, const volatile void *addr) -{ - return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0; -} - -static inline int __test_bit(unsigned long nr, const volatile void *addr) -{ - int * a = (int *) addr; - int mask; - - a += nr >> 5; - mask = 1 << (nr & 0x1f); - return ((mask & *a) != 0); -} - -#define test_bit(nr,addr) \ -(__builtin_constant_p(nr) ? \ - __constant_test_bit((nr),(addr)) : \ - __test_bit((nr),(addr))) - -#include <asm-generic/bitops/find.h> - -/** - * fls - find last bit set - * @x: the word to search - * - * This is defined the same way as ffs: - * - return 32..1 to indicate bit 31..0 most significant bit set - * - return 0 to indicate no bits set - */ -#define fls(x) \ -({ \ - int bit; \ - \ - asm(" subcc %1,gr0,gr0,icc0 \n" \ - " ckne icc0,cc4 \n" \ - " cscan.p %1,gr0,%0 ,cc4,#1 \n" \ - " csub %0,%0,%0 ,cc4,#0 \n" \ - " csub %2,%0,%0 ,cc4,#1 \n" \ - : "=&r"(bit) \ - : "r"(x), "r"(32) \ - : "icc0", "cc4" \ - ); \ - \ - bit; \ -}) - -/** - * fls64 - find last bit set in a 64-bit value - * @n: the value to search - * - * This is defined the same way as ffs: - * - return 64..1 to indicate bit 63..0 most significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int fls64(u64 n) -{ - union { - u64 ll; - struct { u32 h, l; }; - } _; - int bit, x, y; - - _.ll = n; - - asm(" subcc.p %3,gr0,gr0,icc0 \n" - " subcc %4,gr0,gr0,icc1 \n" - " ckne icc0,cc4 \n" - " ckne icc1,cc5 \n" - " norcr cc4,cc5,cc6 \n" - " csub.p %0,%0,%0 ,cc6,1 \n" - " orcr cc5,cc4,cc4 \n" - " andcr cc4,cc5,cc4 \n" - " cscan.p %3,gr0,%0 ,cc4,0 \n" - " setlos #64,%1 \n" - " cscan.p %4,gr0,%0 ,cc4,1 \n" - " setlos #32,%2 \n" - " csub.p %1,%0,%0 ,cc4,0 \n" - " csub %2,%0,%0 ,cc4,1 \n" - : "=&r"(bit), "=r"(x), "=r"(y) - : "0r"(_.h), "r"(_.l) - : "icc0", "icc1", "cc4", "cc5", "cc6" - ); - return bit; - -} - -/** - * ffs - find first bit set - * @x: the word to search - * - * - return 32..1 to indicate bit 31..0 most least significant bit set - * - return 0 to indicate no bits set - */ -static inline __attribute__((const)) -int ffs(int x) -{ - /* Note: (x & -x) gives us a mask that is the least significant - * (rightmost) 1-bit of the value in x. - */ - return fls(x & -x); -} - -/** - * __ffs - find first bit set - * @x: the word to search - * - * - return 31..0 to indicate bit 31..0 most least significant bit set - * - if no bits are set in x, the result is undefined - */ -static inline __attribute__((const)) -int __ffs(unsigned long x) -{ - int bit; - asm("scan %1,gr0,%0" : "=r"(bit) : "r"(x & -x)); - return 31 - bit; -} - -/** - * __fls - find last (most-significant) set bit in a long word - * @word: the word to search - * - * Undefined if no set bit exists, so code should check against 0 first. - */ -static inline unsigned long __fls(unsigned long word) -{ - unsigned long bit; - asm("scan %1,gr0,%0" : "=r"(bit) : "r"(word)); - return bit; -} - -/* - * special slimline version of fls() for calculating ilog2_u32() - * - note: no protection against n == 0 - */ -#define ARCH_HAS_ILOG2_U32 -static inline __attribute__((const)) -int __ilog2_u32(u32 n) -{ - int bit; - asm("scan %1,gr0,%0" : "=r"(bit) : "r"(n)); - return 31 - bit; -} - -/* - * special slimline version of fls64() for calculating ilog2_u64() - * - note: no protection against n == 0 - */ -#define ARCH_HAS_ILOG2_U64 -static inline __attribute__((const)) -int __ilog2_u64(u64 n) -{ - union { - u64 ll; - struct { u32 h, l; }; - } _; - int bit, x, y; - - _.ll = n; - - asm(" subcc %3,gr0,gr0,icc0 \n" - " ckeq icc0,cc4 \n" - " cscan.p %3,gr0,%0 ,cc4,0 \n" - " setlos #63,%1 \n" - " cscan.p %4,gr0,%0 ,cc4,1 \n" - " setlos #31,%2 \n" - " csub.p %1,%0,%0 ,cc4,0 \n" - " csub %2,%0,%0 ,cc4,1 \n" - : "=&r"(bit), "=r"(x), "=r"(y) - : "0r"(_.h), "r"(_.l) - : "icc0", "cc4" - ); - return bit; -} - -#include <asm-generic/bitops/sched.h> -#include <asm-generic/bitops/hweight.h> -#include <asm-generic/bitops/lock.h> - -#include <asm-generic/bitops/le.h> - -#include <asm-generic/bitops/ext2-atomic-setbit.h> - -#endif /* __KERNEL__ */ - -#endif /* _ASM_BITOPS_H */ diff --git a/arch/frv/include/asm/bug.h b/arch/frv/include/asm/bug.h deleted file mode 100644 index dd01bcf42ee6..000000000000 --- a/arch/frv/include/asm/bug.h +++ /dev/null @@ -1,56 +0,0 @@ -/* bug.h: FRV bug trapping - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_BUG_H -#define _ASM_BUG_H - -#include <linux/linkage.h> - -#ifdef CONFIG_BUG -/* - * Tell the user there is some problem. - */ -extern asmlinkage void __debug_bug_trap(int signr); - -#ifdef CONFIG_NO_KERNEL_MSG -#define _debug_bug_printk() -#else -extern void __debug_bug_printk(const char *file, unsigned line); -#define _debug_bug_printk() __debug_bug_printk(__FILE__, __LINE__) -#endif - -#define _debug_bug_trap(signr) \ -do { \ - __debug_bug_trap(signr); \ - asm volatile("nop"); \ -} while(1) - -#define HAVE_ARCH_BUG -#define BUG() \ -do { \ - _debug_bug_printk(); \ - _debug_bug_trap(6 /*SIGABRT*/); \ -} while (0) - -#ifdef CONFIG_GDBSTUB -#define HAVE_ARCH_KGDB_RAISE -#define kgdb_raise(signr) do { _debug_bug_trap(signr); } while(0) - -#define HAVE_ARCH_KGDB_BAD_PAGE -#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0) -#endif - -#endif /* CONFIG_BUG */ - -#include <asm-generic/bug.h> - -extern void die_if_kernel(const char *, ...) __attribute__((format(printf, 1, 2))); - -#endif diff --git a/arch/frv/include/asm/bugs.h b/arch/frv/include/asm/bugs.h deleted file mode 100644 index f2382be2b46c..000000000000 --- a/arch/frv/include/asm/bugs.h +++ /dev/null @@ -1,14 +0,0 @@ -/* bugs.h: arch bug checking entry - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -static inline void check_bugs(void) -{ -} diff --git a/arch/frv/include/asm/busctl-regs.h b/arch/frv/include/asm/busctl-regs.h deleted file mode 100644 index bb0ff4816e27..000000000000 --- a/arch/frv/include/asm/busctl-regs.h +++ /dev/null @@ -1,41 +0,0 @@ -/* busctl-regs.h: FR400-series CPU bus controller registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_BUSCTL_REGS_H -#define _ASM_BUSCTL_REGS_H - -/* bus controller registers */ -#define __get_LGCR() ({ *(volatile unsigned long *)(0xfe000010); }) -#define __get_LMAICR() ({ *(volatile unsigned long *)(0xfe000030); }) -#define __get_LEMBR() ({ *(volatile unsigned long *)(0xfe000040); }) -#define __get_LEMAM() ({ *(volatile unsigned long *)(0xfe000048); }) -#define __get_LCR(R) ({ *(volatile unsigned long *)(0xfe000100 + 8*(R)); }) -#define __get_LSBR(R) ({ *(volatile unsigned long *)(0xfe000c00 + 8*(R)); }) -#define __get_LSAM(R) ({ *(volatile unsigned long *)(0xfe000d00 + 8*(R)); }) - -#define __set_LGCR(V) do { *(volatile unsigned long *)(0xfe000010) = (V); } while(0) -#define __set_LMAICR(V) do { *(volatile unsigned long *)(0xfe000030) = (V); } while(0) -#define __set_LEMBR(V) do { *(volatile unsigned long *)(0xfe000040) = (V); } while(0) -#define __set_LEMAM(V) do { *(volatile unsigned long *)(0xfe000048) = (V); } while(0) -#define __set_LCR(R,V) do { *(volatile unsigned long *)(0xfe000100 + 8*(R)) = (V); } while(0) -#define __set_LSBR(R,V) do { *(volatile unsigned long *)(0xfe000c00 + 8*(R)) = (V); } while(0) -#define __set_LSAM(R,V) do { *(volatile unsigned long *)(0xfe000d00 + 8*(R)) = (V); } while(0) - -/* FR401 SDRAM controller registers */ -#define __get_DBR(R) ({ *(volatile unsigned long *)(0xfe000e00 + 8*(R)); }) -#define __get_DAM(R) ({ *(volatile unsigned long *)(0xfe000f00 + 8*(R)); }) - -/* FR551 SDRAM controller registers */ -#define __get_DARS(R) ({ *(volatile unsigned long *)(0xfeff0100 + 8*(R)); }) -#define __get_DAMK(R) ({ *(volatile unsigned long *)(0xfeff0110 + 8*(R)); }) - - -#endif /* _ASM_BUSCTL_REGS_H */ diff --git a/arch/frv/include/asm/cache.h b/arch/frv/include/asm/cache.h deleted file mode 100644 index 2797163b8f4f..000000000000 --- a/arch/frv/include/asm/cache.h +++ /dev/null @@ -1,23 +0,0 @@ -/* cache.h: FRV cache definitions - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASM_CACHE_H -#define __ASM_CACHE_H - - -/* bytes per L1 cache line */ -#define L1_CACHE_SHIFT (CONFIG_FRV_L1_CACHE_SHIFT) -#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) - -#define __cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) -#define ____cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) - -#endif diff --git a/arch/frv/include/asm/cacheflush.h b/arch/frv/include/asm/cacheflush.h deleted file mode 100644 index edbac54ae015..000000000000 --- a/arch/frv/include/asm/cacheflush.h +++ /dev/null @@ -1,105 +0,0 @@ -/* cacheflush.h: FRV cache flushing routines - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_CACHEFLUSH_H -#define _ASM_CACHEFLUSH_H - -/* Keep includes the same across arches. */ -#include <linux/mm.h> - -/* - * virtually-indexed cache management (our cache is physically indexed) - */ -#define flush_cache_all() do {} while(0) -#define flush_cache_mm(mm) do {} while(0) -#define flush_cache_dup_mm(mm) do {} while(0) -#define flush_cache_range(mm, start, end) do {} while(0) -#define flush_cache_page(vma, vmaddr, pfn) do {} while(0) -#define flush_cache_vmap(start, end) do {} while(0) -#define flush_cache_vunmap(start, end) do {} while(0) -#define flush_dcache_mmap_lock(mapping) do {} while(0) -#define flush_dcache_mmap_unlock(mapping) do {} while(0) - -/* - * physically-indexed cache management - * - see arch/frv/lib/cache.S - */ -extern void frv_dcache_writeback(unsigned long start, unsigned long size); -extern void frv_cache_invalidate(unsigned long start, unsigned long size); -extern void frv_icache_invalidate(unsigned long start, unsigned long size); -extern void frv_cache_wback_inv(unsigned long start, unsigned long size); - -static inline void __flush_cache_all(void) -{ - asm volatile(" dcef @(gr0,gr0),#1 \n" - " icei @(gr0,gr0),#1 \n" - " membar \n" - : : : "memory" - ); -} - -/* dcache/icache coherency... */ -#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 -#ifdef CONFIG_MMU -extern void flush_dcache_page(struct page *page); -#else -static inline void flush_dcache_page(struct page *page) -{ - unsigned long addr = page_to_phys(page); - frv_dcache_writeback(addr, addr + PAGE_SIZE); -} -#endif - -static inline void flush_page_to_ram(struct page *page) -{ - flush_dcache_page(page); -} - -static inline void flush_icache(void) -{ - __flush_cache_all(); -} - -static inline void flush_icache_range(unsigned long start, unsigned long end) -{ - frv_cache_wback_inv(start, end); -} - -#ifdef CONFIG_MMU -extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long start, unsigned long len); -#else -static inline void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long start, unsigned long len) -{ - frv_cache_wback_inv(start, start + len); -} -#endif - -static inline void flush_icache_page(struct vm_area_struct *vma, struct page *page) -{ - flush_icache_user_range(vma, page, page_to_phys(page), PAGE_SIZE); -} - -/* - * permit ptrace to access another process's address space through the icache - * and the dcache - */ -#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ -do { \ - memcpy((dst), (src), (len)); \ - flush_icache_user_range((vma), (page), (vaddr), (len)); \ -} while(0) - -#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ - memcpy((dst), (src), (len)) - -#endif /* _ASM_CACHEFLUSH_H */ diff --git a/arch/frv/include/asm/checksum.h b/arch/frv/include/asm/checksum.h deleted file mode 100644 index b77388c5901d..000000000000 --- a/arch/frv/include/asm/checksum.h +++ /dev/null @@ -1,180 +0,0 @@ -/* checksum.h: FRV checksumming - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_CHECKSUM_H -#define _ASM_CHECKSUM_H - -#include <linux/in6.h> - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum); - -/* - * the same as csum_partial, but copies from src while it - * checksums - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum); - -/* - * the same as csum_partial_copy, but copies from user space. - * - * here even more important to align src and dst on a 32-bit (or even - * better 64-bit) boundary - */ -extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err); - -/* - * This is a version of ip_compute_csum() optimized for IP headers, - * which always checksum on 4 octet boundaries. - * - */ -static inline -__sum16 ip_fast_csum(const void *iph, unsigned int ihl) -{ - unsigned int tmp, inc, sum = 0; - - asm(" addcc gr0,gr0,gr0,icc0\n" /* clear icc0.C */ - " subi %1,#4,%1 \n" - "0: \n" - " ldu.p @(%1,%3),%4 \n" - " subicc %2,#1,%2,icc1 \n" - " addxcc.p %4,%0,%0,icc0 \n" - " bhi icc1,#2,0b \n" - - /* fold the 33-bit result into 16-bits */ - " addxcc gr0,%0,%0,icc0 \n" - " srli %0,#16,%1 \n" - " sethi #0,%0 \n" - " add %1,%0,%0 \n" - " srli %0,#16,%1 \n" - " add %1,%0,%0 \n" - - : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp) - : "0" (sum), "1" (iph), "2" (ihl), "3" (4), - "m"(*(volatile struct { int _[100]; } *)iph) - : "icc0", "icc1", "memory" - ); - - return (__force __sum16)~sum; -} - -/* - * Fold a partial checksum - */ -static inline __sum16 csum_fold(__wsum sum) -{ - unsigned int tmp; - - asm(" srli %0,#16,%1 \n" - " sethi #0,%0 \n" - " add %1,%0,%0 \n" - " srli %0,#16,%1 \n" - " add %1,%0,%0 \n" - : "=r"(sum), "=&r"(tmp) - : "0"(sum) - ); - - return (__force __sum16)~sum; -} - -/* - * computes the checksum of the TCP/UDP pseudo-header - * returns a 16-bit checksum, already complemented - */ -static inline __wsum -csum_tcpudp_nofold(__be32 saddr, __be32 daddr, __u32 len, - __u8 proto, __wsum sum) -{ - asm(" addcc %1,%0,%0,icc0 \n" - " addxcc %2,%0,%0,icc0 \n" - " addxcc %3,%0,%0,icc0 \n" - " addxcc gr0,%0,%0,icc0 \n" - : "=r" (sum) - : "r" (daddr), "r" (saddr), "r" (len + proto), "0"(sum) - : "icc0" - ); - return sum; -} - -static inline __sum16 -csum_tcpudp_magic(__be32 saddr, __be32 daddr, __u32 len, - __u8 proto, __wsum sum) -{ - return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); -} - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -extern __sum16 ip_compute_csum(const void *buff, int len); - -#define _HAVE_ARCH_IPV6_CSUM -static inline __sum16 -csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr, - __u32 len, __u8 proto, __wsum sum) -{ - unsigned long tmp, tmp2; - - asm(" addcc %2,%0,%0,icc0 \n" - - /* add up the source addr */ - " ldi @(%3,0),%1 \n" - " addxcc %1,%0,%0,icc0 \n" - " ldi @(%3,4),%2 \n" - " addxcc %2,%0,%0,icc0 \n" - " ldi @(%3,8),%1 \n" - " addxcc %1,%0,%0,icc0 \n" - " ldi @(%3,12),%2 \n" - " addxcc %2,%0,%0,icc0 \n" - - /* add up the dest addr */ - " ldi @(%4,0),%1 \n" - " addxcc %1,%0,%0,icc0 \n" - " ldi @(%4,4),%2 \n" - " addxcc %2,%0,%0,icc0 \n" - " ldi @(%4,8),%1 \n" - " addxcc %1,%0,%0,icc0 \n" - " ldi @(%4,12),%2 \n" - " addxcc %2,%0,%0,icc0 \n" - - /* fold the 33-bit result into 16-bits */ - " addxcc gr0,%0,%0,icc0 \n" - " srli %0,#16,%1 \n" - " sethi #0,%0 \n" - " add %1,%0,%0 \n" - " srli %0,#16,%1 \n" - " add %1,%0,%0 \n" - - : "=r" (sum), "=&r" (tmp), "=r" (tmp2) - : "r" (saddr), "r" (daddr), "0" (sum), "2" (len + proto) - : "icc0" - ); - - return (__force __sum16)~sum; -} - -#endif /* _ASM_CHECKSUM_H */ diff --git a/arch/frv/include/asm/cmpxchg.h b/arch/frv/include/asm/cmpxchg.h deleted file mode 100644 index ad1f11cfa92a..000000000000 --- a/arch/frv/include/asm/cmpxchg.h +++ /dev/null @@ -1,171 +0,0 @@ -/* xchg and cmpxchg operation emulation for FR-V - * - * For an explanation of how atomic ops work in this arch, see: - * Documentation/frv/atomic-ops.txt - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_CMPXCHG_H -#define _ASM_CMPXCHG_H - -#include <linux/types.h> - -/*****************************************************************************/ -/* - * exchange value with memory - */ -extern uint64_t __xchg_64(uint64_t i, volatile void *v); - -#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS - -#define xchg(ptr, x) \ -({ \ - __typeof__(ptr) __xg_ptr = (ptr); \ - __typeof__(*(ptr)) __xg_orig; \ - \ - switch (sizeof(__xg_orig)) { \ - case 4: \ - asm volatile( \ - "swap%I0 %M0,%1" \ - : "+m"(*__xg_ptr), "=r"(__xg_orig) \ - : "1"(x) \ - : "memory" \ - ); \ - break; \ - \ - default: \ - __xg_orig = (__typeof__(__xg_orig))0; \ - asm volatile("break"); \ - break; \ - } \ - \ - __xg_orig; \ -}) - -#else - -extern uint32_t __xchg_32(uint32_t i, volatile void *v); - -#define xchg(ptr, x) \ -({ \ - __typeof__(ptr) __xg_ptr = (ptr); \ - __typeof__(*(ptr)) __xg_orig; \ - \ - switch (sizeof(__xg_orig)) { \ - case 4: __xg_orig = (__typeof__(*(ptr))) __xchg_32((uint32_t) x, __xg_ptr); break; \ - default: \ - __xg_orig = (__typeof__(__xg_orig))0; \ - asm volatile("break"); \ - break; \ - } \ - __xg_orig; \ -}) - -#endif - -/*****************************************************************************/ -/* - * compare and conditionally exchange value with memory - * - if (*ptr == test) then orig = *ptr; *ptr = test; - * - if (*ptr != test) then orig = *ptr; - */ -extern uint64_t __cmpxchg_64(uint64_t test, uint64_t new, volatile uint64_t *v); -#define cmpxchg64(p, o, n) __cmpxchg_64((o), (n), (p)) - -#ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS - -#define cmpxchg(ptr, test, new) \ -({ \ - __typeof__(ptr) __xg_ptr = (ptr); \ - __typeof__(*(ptr)) __xg_orig, __xg_tmp; \ - __typeof__(*(ptr)) __xg_test = (test); \ - __typeof__(*(ptr)) __xg_new = (new); \ - \ - switch (sizeof(__xg_orig)) { \ - case 4: \ - asm volatile( \ - "0: \n" \ - " orcc gr0,gr0,gr0,icc3 \n" \ - " ckeq icc3,cc7 \n" \ - " ld.p %M0,%1 \n" \ - " orcr cc7,cc7,cc3 \n" \ - " sub%I4cc %1,%4,%2,icc0 \n" \ - " bne icc0,#0,1f \n" \ - " cst.p %3,%M0 ,cc3,#1 \n" \ - " corcc gr29,gr29,gr0 ,cc3,#1 \n" \ - " beq icc3,#0,0b \n" \ - "1: \n" \ - : "+U"(*__xg_ptr), "=&r"(__xg_orig), "=&r"(__xg_tmp) \ - : "r"(__xg_new), "NPr"(__xg_test) \ - : "memory", "cc7", "cc3", "icc3", "icc0" \ - ); \ - break; \ - \ - default: \ - __xg_orig = (__typeof__(__xg_orig))0; \ - asm volatile("break"); \ - break; \ - } \ - \ - __xg_orig; \ -}) - -#else - -extern uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new); - -#define cmpxchg(ptr, test, new) \ -({ \ - __typeof__(ptr) __xg_ptr = (ptr); \ - __typeof__(*(ptr)) __xg_orig; \ - __typeof__(*(ptr)) __xg_test = (test); \ - __typeof__(*(ptr)) __xg_new = (new); \ - \ - switch (sizeof(__xg_orig)) { \ - case 4: __xg_orig = (__force __typeof__(*ptr)) \ - __cmpxchg_32((__force uint32_t *)__xg_ptr, \ - (__force uint32_t)__xg_test, \ - (__force uint32_t)__xg_new); break; \ - default: \ - __xg_orig = (__typeof__(__xg_orig))0; \ - asm volatile("break"); \ - break; \ - } \ - \ - __xg_orig; \ -}) - -#endif - -#include <asm-generic/cmpxchg-local.h> - -static inline unsigned long __cmpxchg_local(volatile void *ptr, - unsigned long old, - unsigned long new, int size) -{ - switch (size) { - case 4: - return cmpxchg((unsigned long *)ptr, old, new); - default: - return __cmpxchg_local_generic(ptr, old, new, size); - } - - return old; -} - -/* - * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make - * them available. - */ -#define cmpxchg_local(ptr, o, n) \ - ((__typeof__(*(ptr)))__cmpxchg_local((ptr), (unsigned long)(o), \ - (unsigned long)(n), sizeof(*(ptr)))) -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) - -#endif /* _ASM_CMPXCHG_H */ diff --git a/arch/frv/include/asm/cpu-irqs.h b/arch/frv/include/asm/cpu-irqs.h deleted file mode 100644 index 478f3498fcfe..000000000000 --- a/arch/frv/include/asm/cpu-irqs.h +++ /dev/null @@ -1,81 +0,0 @@ -/* cpu-irqs.h: on-CPU peripheral irqs - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_CPU_IRQS_H -#define _ASM_CPU_IRQS_H - -#ifndef __ASSEMBLY__ - -/* IRQ to level mappings */ -#define IRQ_GDBSTUB_LEVEL 15 -#define IRQ_UART_LEVEL 13 - -#ifdef CONFIG_GDBSTUB_UART0 -#define IRQ_UART0_LEVEL IRQ_GDBSTUB_LEVEL -#else -#define IRQ_UART0_LEVEL IRQ_UART_LEVEL -#endif - -#ifdef CONFIG_GDBSTUB_UART1 -#define IRQ_UART1_LEVEL IRQ_GDBSTUB_LEVEL -#else -#define IRQ_UART1_LEVEL IRQ_UART_LEVEL -#endif - -#define IRQ_DMA0_LEVEL 14 -#define IRQ_DMA1_LEVEL 14 -#define IRQ_DMA2_LEVEL 14 -#define IRQ_DMA3_LEVEL 14 -#define IRQ_DMA4_LEVEL 14 -#define IRQ_DMA5_LEVEL 14 -#define IRQ_DMA6_LEVEL 14 -#define IRQ_DMA7_LEVEL 14 - -#define IRQ_TIMER0_LEVEL 12 -#define IRQ_TIMER1_LEVEL 11 -#define IRQ_TIMER2_LEVEL 10 - -#define IRQ_XIRQ0_LEVEL 1 -#define IRQ_XIRQ1_LEVEL 2 -#define IRQ_XIRQ2_LEVEL 3 -#define IRQ_XIRQ3_LEVEL 4 -#define IRQ_XIRQ4_LEVEL 5 -#define IRQ_XIRQ5_LEVEL 6 -#define IRQ_XIRQ6_LEVEL 7 -#define IRQ_XIRQ7_LEVEL 8 - -/* IRQ IDs presented to drivers */ -#define IRQ_CPU__UNUSED IRQ_BASE_CPU -#define IRQ_CPU_UART0 (IRQ_BASE_CPU + IRQ_UART0_LEVEL) -#define IRQ_CPU_UART1 (IRQ_BASE_CPU + IRQ_UART1_LEVEL) -#define IRQ_CPU_TIMER0 (IRQ_BASE_CPU + IRQ_TIMER0_LEVEL) -#define IRQ_CPU_TIMER1 (IRQ_BASE_CPU + IRQ_TIMER1_LEVEL) -#define IRQ_CPU_TIMER2 (IRQ_BASE_CPU + IRQ_TIMER2_LEVEL) -#define IRQ_CPU_DMA0 (IRQ_BASE_CPU + IRQ_DMA0_LEVEL) -#define IRQ_CPU_DMA1 (IRQ_BASE_CPU + IRQ_DMA1_LEVEL) -#define IRQ_CPU_DMA2 (IRQ_BASE_CPU + IRQ_DMA2_LEVEL) -#define IRQ_CPU_DMA3 (IRQ_BASE_CPU + IRQ_DMA3_LEVEL) -#define IRQ_CPU_DMA4 (IRQ_BASE_CPU + IRQ_DMA4_LEVEL) -#define IRQ_CPU_DMA5 (IRQ_BASE_CPU + IRQ_DMA5_LEVEL) -#define IRQ_CPU_DMA6 (IRQ_BASE_CPU + IRQ_DMA6_LEVEL) -#define IRQ_CPU_DMA7 (IRQ_BASE_CPU + IRQ_DMA7_LEVEL) -#define IRQ_CPU_EXTERNAL0 (IRQ_BASE_CPU + IRQ_XIRQ0_LEVEL) -#define IRQ_CPU_EXTERNAL1 (IRQ_BASE_CPU + IRQ_XIRQ1_LEVEL) -#define IRQ_CPU_EXTERNAL2 (IRQ_BASE_CPU + IRQ_XIRQ2_LEVEL) -#define IRQ_CPU_EXTERNAL3 (IRQ_BASE_CPU + IRQ_XIRQ3_LEVEL) -#define IRQ_CPU_EXTERNAL4 (IRQ_BASE_CPU + IRQ_XIRQ4_LEVEL) -#define IRQ_CPU_EXTERNAL5 (IRQ_BASE_CPU + IRQ_XIRQ5_LEVEL) -#define IRQ_CPU_EXTERNAL6 (IRQ_BASE_CPU + IRQ_XIRQ6_LEVEL) -#define IRQ_CPU_EXTERNAL7 (IRQ_BASE_CPU + IRQ_XIRQ7_LEVEL) - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_CPU_IRQS_H */ diff --git a/arch/frv/include/asm/current.h b/arch/frv/include/asm/current.h deleted file mode 100644 index 86b027491b08..000000000000 --- a/arch/frv/include/asm/current.h +++ /dev/null @@ -1,30 +0,0 @@ -/* current.h: FRV current task pointer - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_CURRENT_H -#define _ASM_CURRENT_H - -#ifndef __ASSEMBLY__ - -/* - * dedicate GR29 to keeping the current task pointer - */ -register struct task_struct *current asm("gr29"); - -#define get_current() current - -#else - -#define CURRENT gr29 - -#endif - -#endif /* _ASM_CURRENT_H */ diff --git a/arch/frv/include/asm/delay.h b/arch/frv/include/asm/delay.h deleted file mode 100644 index 597b4ebf03b4..000000000000 --- a/arch/frv/include/asm/delay.h +++ /dev/null @@ -1,50 +0,0 @@ -/* delay.h: FRV delay code - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_DELAY_H -#define _ASM_DELAY_H - -#include <asm/param.h> -#include <asm/timer-regs.h> - -/* - * delay loop - runs at __core_clock_speed_HZ / 2 [there are 2 insns in the loop] - */ -extern unsigned long __delay_loops_MHz; - -static inline void __delay(unsigned long loops) -{ - asm volatile("1: subicc %0,#1,%0,icc0 \n" - " bnc icc0,#2,1b \n" - : "=r" (loops) - : "0" (loops) - : "icc0" - ); -} - -/* - * Use only for very small delays ( < 1 msec). Should probably use a - * lookup table, really, as the multiplications take much too long with - * short delays. This is a "reasonable" implementation, though (and the - * first constant multiplications gets optimized away if the delay is - * a constant) - */ - -extern unsigned long loops_per_jiffy; - -static inline void udelay(unsigned long usecs) -{ - __delay(usecs * __delay_loops_MHz); -} - -#define ndelay(n) udelay((n) * 5) - -#endif /* _ASM_DELAY_H */ diff --git a/arch/frv/include/asm/div64.h b/arch/frv/include/asm/div64.h deleted file mode 100644 index 6cd978cefb28..000000000000 --- a/arch/frv/include/asm/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/div64.h> diff --git a/arch/frv/include/asm/dm9000.h b/arch/frv/include/asm/dm9000.h deleted file mode 100644 index f6f48fd9ec6e..000000000000 --- a/arch/frv/include/asm/dm9000.h +++ /dev/null @@ -1,37 +0,0 @@ -/* dm9000.h: Davicom DM9000 adapter configuration - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_DM9000_H -#define _ASM_DM9000_H - -#include <asm/mb-regs.h> - -#define DM9000_ARCH_IOBASE (__region_CS6 + 0x300) -#define DM9000_ARCH_IRQ IRQ_CPU_EXTERNAL3 /* XIRQ #3 (shared with FPGA) */ -#undef DM9000_ARCH_IRQ_ACTLOW /* IRQ pin active high */ -#define DM9000_ARCH_BUS_INFO "CS6#+0x300" /* bus info for ethtool */ - -#undef __is_PCI_IO -#define __is_PCI_IO(addr) 0 /* not PCI */ - -#undef inl -#define inl(addr) \ -({ \ - unsigned long __ioaddr = (unsigned long) addr; \ - uint32_t x = readl(__ioaddr); \ - ((x & 0xff) << 24) | ((x & 0xff00) << 8) | ((x >> 8) & 0xff00) | ((x >> 24) & 0xff); \ -}) - -#undef insl -#define insl(a,b,l) __insl(a,b,l,0) /* don't byte-swap */ - - -#endif /* _ASM_DM9000_H */ diff --git a/arch/frv/include/asm/dma-mapping.h b/arch/frv/include/asm/dma-mapping.h deleted file mode 100644 index fd80e840a1e6..000000000000 --- a/arch/frv/include/asm/dma-mapping.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_DMA_MAPPING_H -#define _ASM_DMA_MAPPING_H - -#include <asm/cache.h> -#include <asm/cacheflush.h> - -extern unsigned long __nongprelbss dma_coherent_mem_start; -extern unsigned long __nongprelbss dma_coherent_mem_end; - -extern const struct dma_map_ops frv_dma_ops; - -static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus) -{ - return &frv_dma_ops; -} - -#endif /* _ASM_DMA_MAPPING_H */ diff --git a/arch/frv/include/asm/dma.h b/arch/frv/include/asm/dma.h deleted file mode 100644 index 683c47d48a5b..000000000000 --- a/arch/frv/include/asm/dma.h +++ /dev/null @@ -1,125 +0,0 @@ -/* dma.h: FRV DMA controller management - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_DMA_H -#define _ASM_DMA_H - -//#define DMA_DEBUG 1 - -#include <linux/interrupt.h> - -#undef MAX_DMA_CHANNELS /* don't use kernel/dma.c */ - -/* under 2.4 this is actually needed by the new bootmem allocator */ -#define MAX_DMA_ADDRESS PAGE_OFFSET - -/* - * FRV DMA controller management - */ -typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data); - -extern void frv_dma_init(void); - -extern int frv_dma_open(const char *devname, - unsigned long dmamask, - int dmacap, - dma_irq_handler_t handler, - unsigned long irq_flags, - void *data); - -/* channels required */ -#define FRV_DMA_MASK_ANY ULONG_MAX /* any channel */ - -/* capabilities required */ -#define FRV_DMA_CAP_DREQ 0x01 /* DMA request pin */ -#define FRV_DMA_CAP_DACK 0x02 /* DMA ACK pin */ -#define FRV_DMA_CAP_DONE 0x04 /* DMA done pin */ - -extern void frv_dma_close(int dma); - -extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr); - -extern void frv_dma_start(int dma, - unsigned long sba, unsigned long dba, - unsigned long pix, unsigned long six, unsigned long bcl); - -extern void frv_dma_restart_circular(int dma, unsigned long six); - -extern void frv_dma_stop(int dma); - -extern int is_frv_dma_interrupting(int dma); - -extern void frv_dma_dump(int dma); - -extern void frv_dma_status_clear(int dma); - -#define FRV_DMA_NCHANS 8 -#define FRV_DMA_4CHANS 4 -#define FRV_DMA_8CHANS 8 - -#define DMAC_CCFRx 0x00 /* channel configuration reg */ -#define DMAC_CCFRx_CM_SHIFT 16 -#define DMAC_CCFRx_CM_DA 0x00000000 -#define DMAC_CCFRx_CM_SCA 0x00010000 -#define DMAC_CCFRx_CM_DCA 0x00020000 -#define DMAC_CCFRx_CM_2D 0x00030000 -#define DMAC_CCFRx_ATS_SHIFT 8 -#define DMAC_CCFRx_RS_INTERN 0x00000000 -#define DMAC_CCFRx_RS_EXTERN 0x00000001 -#define DMAC_CCFRx_RS_SHIFT 0 - -#define DMAC_CSTRx 0x08 /* channel status reg */ -#define DMAC_CSTRx_FS 0x0000003f -#define DMAC_CSTRx_NE 0x00000100 -#define DMAC_CSTRx_FED 0x00000200 -#define DMAC_CSTRx_WER 0x00000800 -#define DMAC_CSTRx_RER 0x00001000 -#define DMAC_CSTRx_CE 0x00002000 -#define DMAC_CSTRx_INT 0x00800000 -#define DMAC_CSTRx_BUSY 0x80000000 - -#define DMAC_CCTRx 0x10 /* channel control reg */ -#define DMAC_CCTRx_DSIZ_1 0x00000000 -#define DMAC_CCTRx_DSIZ_2 0x00000001 -#define DMAC_CCTRx_DSIZ_4 0x00000002 -#define DMAC_CCTRx_DSIZ_32 0x00000005 -#define DMAC_CCTRx_DAU_HOLD 0x00000000 -#define DMAC_CCTRx_DAU_INC 0x00000010 -#define DMAC_CCTRx_DAU_DEC 0x00000020 -#define DMAC_CCTRx_SSIZ_1 0x00000000 -#define DMAC_CCTRx_SSIZ_2 0x00000100 -#define DMAC_CCTRx_SSIZ_4 0x00000200 -#define DMAC_CCTRx_SSIZ_32 0x00000500 -#define DMAC_CCTRx_SAU_HOLD 0x00000000 -#define DMAC_CCTRx_SAU_INC 0x00001000 -#define DMAC_CCTRx_SAU_DEC 0x00002000 -#define DMAC_CCTRx_FC 0x08000000 -#define DMAC_CCTRx_ICE 0x10000000 -#define DMAC_CCTRx_IE 0x40000000 -#define DMAC_CCTRx_ACT 0x80000000 - -#define DMAC_SBAx 0x18 /* source base address reg */ -#define DMAC_DBAx 0x20 /* data base address reg */ -#define DMAC_PIXx 0x28 /* primary index reg */ -#define DMAC_SIXx 0x30 /* secondary index reg */ -#define DMAC_BCLx 0x38 /* byte count limit reg */ -#define DMAC_APRx 0x40 /* alternate pointer reg */ - -/* - * required for PCI + MODULES - */ -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* _ASM_DMA_H */ diff --git a/arch/frv/include/asm/elf.h b/arch/frv/include/asm/elf.h deleted file mode 100644 index 2bac6446db41..000000000000 --- a/arch/frv/include/asm/elf.h +++ /dev/null @@ -1,140 +0,0 @@ -/* elf.h: FR-V ELF definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-m68knommu/elf.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_ELF_H -#define __ASM_ELF_H - -#include <asm/ptrace.h> -#include <asm/user.h> - -struct elf32_hdr; - -/* - * ELF header e_flags defines. - */ -#define EF_FRV_GPR_MASK 0x00000003 /* mask for # of gprs */ -#define EF_FRV_GPR32 0x00000001 /* Only uses GR on 32-register */ -#define EF_FRV_GPR64 0x00000002 /* Only uses GR on 64-register */ -#define EF_FRV_FPR_MASK 0x0000000c /* mask for # of fprs */ -#define EF_FRV_FPR32 0x00000004 /* Only uses FR on 32-register */ -#define EF_FRV_FPR64 0x00000008 /* Only uses FR on 64-register */ -#define EF_FRV_FPR_NONE 0x0000000C /* Uses software floating-point */ -#define EF_FRV_DWORD_MASK 0x00000030 /* mask for dword support */ -#define EF_FRV_DWORD_YES 0x00000010 /* Assumes stack aligned to 8-byte boundaries. */ -#define EF_FRV_DWORD_NO 0x00000020 /* Assumes stack aligned to 4-byte boundaries. */ -#define EF_FRV_DOUBLE 0x00000040 /* Uses double instructions. */ -#define EF_FRV_MEDIA 0x00000080 /* Uses media instructions. */ -#define EF_FRV_PIC 0x00000100 /* Uses position independent code. */ -#define EF_FRV_NON_PIC_RELOCS 0x00000200 /* Does not use position Independent code. */ -#define EF_FRV_MULADD 0x00000400 /* -mmuladd */ -#define EF_FRV_BIGPIC 0x00000800 /* -fPIC */ -#define EF_FRV_LIBPIC 0x00001000 /* -mlibrary-pic */ -#define EF_FRV_G0 0x00002000 /* -G 0, no small data ptr */ -#define EF_FRV_NOPACK 0x00004000 /* -mnopack */ -#define EF_FRV_FDPIC 0x00008000 /* -mfdpic */ -#define EF_FRV_CPU_MASK 0xff000000 /* specific cpu bits */ -#define EF_FRV_CPU_GENERIC 0x00000000 /* Set CPU type is FR-V */ -#define EF_FRV_CPU_FR500 0x01000000 /* Set CPU type is FR500 */ -#define EF_FRV_CPU_FR300 0x02000000 /* Set CPU type is FR300 */ -#define EF_FRV_CPU_SIMPLE 0x03000000 /* SIMPLE */ -#define EF_FRV_CPU_TOMCAT 0x04000000 /* Tomcat, FR500 prototype */ -#define EF_FRV_CPU_FR400 0x05000000 /* Set CPU type is FR400 */ -#define EF_FRV_CPU_FR550 0x06000000 /* Set CPU type is FR550 */ -#define EF_FRV_CPU_FR405 0x07000000 /* Set CPU type is FR405 */ -#define EF_FRV_CPU_FR450 0x08000000 /* Set CPU type is FR450 */ - -/* - * FR-V ELF relocation types - */ - - -/* - * ELF register definitions.. - */ -typedef unsigned long elf_greg_t; - -#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t)) -typedef elf_greg_t elf_gregset_t[ELF_NGREG]; - -typedef struct user_fpmedia_regs elf_fpregset_t; - -/* - * This is used to ensure we don't load something for the wrong architecture. - */ -extern int elf_check_arch(const struct elf32_hdr *hdr); - -#define elf_check_fdpic(x) ((x)->e_flags & EF_FRV_FDPIC && !((x)->e_flags & EF_FRV_NON_PIC_RELOCS)) -#define elf_check_const_displacement(x) ((x)->e_flags & EF_FRV_PIC) - -/* - * These are used to set parameters in the core dumps. - */ -#define ELF_CLASS ELFCLASS32 -#define ELF_DATA ELFDATA2MSB -#define ELF_ARCH EM_FRV - -#define ELF_PLAT_INIT(_r) \ -do { \ - __kernel_frame0_ptr->gr16 = 0; \ - __kernel_frame0_ptr->gr17 = 0; \ - __kernel_frame0_ptr->gr18 = 0; \ - __kernel_frame0_ptr->gr19 = 0; \ - __kernel_frame0_ptr->gr20 = 0; \ - __kernel_frame0_ptr->gr21 = 0; \ - __kernel_frame0_ptr->gr22 = 0; \ - __kernel_frame0_ptr->gr23 = 0; \ - __kernel_frame0_ptr->gr24 = 0; \ - __kernel_frame0_ptr->gr25 = 0; \ - __kernel_frame0_ptr->gr26 = 0; \ - __kernel_frame0_ptr->gr27 = 0; \ - __kernel_frame0_ptr->gr29 = 0; \ -} while(0) - -#define ELF_FDPIC_PLAT_INIT(_regs, _exec_map_addr, _interp_map_addr, _dynamic_addr) \ -do { \ - __kernel_frame0_ptr->gr16 = _exec_map_addr; \ - __kernel_frame0_ptr->gr17 = _interp_map_addr; \ - __kernel_frame0_ptr->gr18 = _dynamic_addr; \ - __kernel_frame0_ptr->gr19 = 0; \ - __kernel_frame0_ptr->gr20 = 0; \ - __kernel_frame0_ptr->gr21 = 0; \ - __kernel_frame0_ptr->gr22 = 0; \ - __kernel_frame0_ptr->gr23 = 0; \ - __kernel_frame0_ptr->gr24 = 0; \ - __kernel_frame0_ptr->gr25 = 0; \ - __kernel_frame0_ptr->gr26 = 0; \ - __kernel_frame0_ptr->gr27 = 0; \ - __kernel_frame0_ptr->gr29 = 0; \ -} while(0) - -#define CORE_DUMP_USE_REGSET -#define ELF_FDPIC_CORE_EFLAGS EF_FRV_FDPIC -#define ELF_EXEC_PAGESIZE 16384 - -/* This is the location that an ET_DYN program is loaded if exec'ed. Typical - use of this is to invoke "./ld.so someprog" to test out a new version of - the loader. We need to make sure that it is out of the way of the program - that it will "exec", and that there is sufficient room for the brk. */ - -#define ELF_ET_DYN_BASE 0x08000000UL - -/* This yields a mask that user programs can use to figure out what - instruction set this cpu supports. */ - -#define ELF_HWCAP (0) - -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. */ - -#define ELF_PLATFORM (NULL) - -#endif diff --git a/arch/frv/include/asm/emergency-restart.h b/arch/frv/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c48e42e..000000000000 --- a/arch/frv/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/frv/include/asm/fpu.h b/arch/frv/include/asm/fpu.h deleted file mode 100644 index 2f0929333f91..000000000000 --- a/arch/frv/include/asm/fpu.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_FPU_H -#define __ASM_FPU_H - - -/* - * MAX floating point unit state size (FSAVE/FRESTORE) - */ - -#define kernel_fpu_end() do { asm volatile("bar":::"memory"); preempt_enable(); } while(0) - -#endif /* __ASM_FPU_H */ diff --git a/arch/frv/include/asm/ftrace.h b/arch/frv/include/asm/ftrace.h deleted file mode 100644 index 40a8c178f10d..000000000000 --- a/arch/frv/include/asm/ftrace.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/frv/include/asm/futex.h b/arch/frv/include/asm/futex.h deleted file mode 100644 index dfcc3484231d..000000000000 --- a/arch/frv/include/asm/futex.h +++ /dev/null @@ -1,22 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#ifdef __KERNEL__ - -#include <linux/futex.h> -#include <asm/errno.h> -#include <linux/uaccess.h> - -extern int arch_futex_atomic_op_inuser(int op, int oparg, int *oval, - u32 __user *uaddr); - -static inline int -futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, - u32 oldval, u32 newval) -{ - return -ENOSYS; -} - -#endif -#endif diff --git a/arch/frv/include/asm/gdb-stub.h b/arch/frv/include/asm/gdb-stub.h deleted file mode 100644 index e6bedd0cd9a5..000000000000 --- a/arch/frv/include/asm/gdb-stub.h +++ /dev/null @@ -1,146 +0,0 @@ -/* gdb-stub.h: FRV GDB stub - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from asm-mips/gdb-stub.h (c) 1995 Andreas Busse - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef __ASM_GDB_STUB_H -#define __ASM_GDB_STUB_H - -#undef GDBSTUB_DEBUG_IO -#undef GDBSTUB_DEBUG_PROTOCOL - -#include <asm/ptrace.h> - -/* - * important register numbers in GDB protocol - * - GR0, GR1, GR2, GR3, GR4, GR5, GR6, GR7, - * - GR8, GR9, GR10, GR11, GR12, GR13, GR14, GR15, - * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23, - * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31, - * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39, - * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47, - * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55, - * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63, - * - FR0, FR1, FR2, FR3, FR4, FR5, FR6, FR7, - * - FR8, FR9, FR10, FR11, FR12, FR13, FR14, FR15, - * - FR16, FR17, FR18, FR19, FR20, FR21, FR22, FR23, - * - FR24, FR25, FR26, FR27, FR28, FR29, FR30, FR31, - * - FR32, FR33, FR34, FR35, FR36, FR37, FR38, FR39, - * - FR40, FR41, FR42, FR43, FR44, FR45, FR46, FR47, - * - FR48, FR49, FR50, FR51, FR52, FR53, FR54, FR55, - * - FR56, FR57, FR58, FR59, FR60, FR61, FR62, FR63, - * - PC, PSR, CCR, CCCR, - * - _X132, _X133, _X134 - * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3, - * - SCR0, SCR1, SCR2, SCR3, - * - LR, LCR, - * - IACC0H, IACC0L, - * - FSR0, - * - ACC0, ACC1, ACC2, ACC3, ACC4, ACC5, ACC6, ACC7, - * - ACCG0123, ACCG4567, - * - MSR0, MSR1, - * - GNER0, GNER1, - * - FNER0, FNER1, - */ -#define GDB_REG_GR(N) (N) -#define GDB_REG_FR(N) (64+(N)) -#define GDB_REG_PC 128 -#define GDB_REG_PSR 129 -#define GDB_REG_CCR 130 -#define GDB_REG_CCCR 131 -#define GDB_REG_TBR 135 -#define GDB_REG_BRR 136 -#define GDB_REG_DBAR(N) (137+(N)) -#define GDB_REG_SCR(N) (141+(N)) -#define GDB_REG_LR 145 -#define GDB_REG_LCR 146 -#define GDB_REG_FSR0 149 -#define GDB_REG_ACC(N) (150+(N)) -#define GDB_REG_ACCG(N) (158+(N)/4) -#define GDB_REG_MSR(N) (160+(N)) -#define GDB_REG_GNER(N) (162+(N)) -#define GDB_REG_FNER(N) (164+(N)) - -#define GDB_REG_SP GDB_REG_GR(1) -#define GDB_REG_FP GDB_REG_GR(2) - -#ifndef _LANGUAGE_ASSEMBLY - -/* - * Prototypes - */ -extern void show_registers_only(struct pt_regs *regs); - -extern void gdbstub_init(void); -extern void gdbstub(int type); -extern void gdbstub_exit(int status); - -extern void gdbstub_io_init(void); -extern void gdbstub_set_baud(unsigned baud); -extern int gdbstub_rx_char(unsigned char *_ch, int nonblock); -extern void gdbstub_tx_char(unsigned char ch); -extern void gdbstub_tx_flush(void); -extern void gdbstub_do_rx(void); - -extern asmlinkage void __debug_stub_init_break(void); -extern asmlinkage void __break_hijack_kernel_event(void); -extern asmlinkage void __break_hijack_kernel_event_breaks_here(void); - -extern asmlinkage void gdbstub_rx_handler(void); -extern asmlinkage void gdbstub_rx_irq(void); -extern asmlinkage void gdbstub_intercept(void); - -extern uint32_t __entry_usertrap_table[]; -extern uint32_t __entry_kerneltrap_table[]; - -extern volatile u8 gdbstub_rx_buffer[PAGE_SIZE]; -extern volatile u32 gdbstub_rx_inp; -extern volatile u32 gdbstub_rx_outp; -extern volatile u8 gdbstub_rx_overflow; -extern u8 gdbstub_rx_unget; - -extern void gdbstub_printk(const char *fmt, ...); -extern void debug_to_serial(const char *p, int n); -extern void console_set_baud(unsigned baud); - -#ifdef GDBSTUB_DEBUG_IO -#define gdbstub_io(FMT,...) gdbstub_printk(FMT, ##__VA_ARGS__) -#else -#define gdbstub_io(FMT,...) ({ 0; }) -#endif - -#ifdef GDBSTUB_DEBUG_PROTOCOL -#define gdbstub_proto(FMT,...) gdbstub_printk(FMT,##__VA_ARGS__) -#else -#define gdbstub_proto(FMT,...) ({ 0; }) -#endif - -/* - * we dedicate GR31 to keeping a pointer to the gdbstub exception frame - * - gr31 is destroyed on entry to the gdbstub if !MMU - * - gr31 is saved in scr3 on entry to the gdbstub if in !MMU - */ -register struct frv_frame0 *__debug_frame0 asm("gr31"); - -#define __debug_frame (&__debug_frame0->regs) -#define __debug_user_context (&__debug_frame0->uc) -#define __debug_regs (&__debug_frame0->debug) -#define __debug_reg(X) ((unsigned long *) ((unsigned long) &__debug_frame0 + (X))) - -struct frv_debug_status { - unsigned long bpsr; - unsigned long dcr; - unsigned long brr; - unsigned long nmar; -}; - -extern struct frv_debug_status __debug_status; - -#endif /* _LANGUAGE_ASSEMBLY */ -#endif /* __ASM_GDB_STUB_H */ diff --git a/arch/frv/include/asm/gpio-regs.h b/arch/frv/include/asm/gpio-regs.h deleted file mode 100644 index 9edf5d5d4d3f..000000000000 --- a/arch/frv/include/asm/gpio-regs.h +++ /dev/null @@ -1,116 +0,0 @@ -/* gpio-regs.h: on-chip general purpose I/O registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_GPIO_REGS -#define _ASM_GPIO_REGS - -#define __reg(ADDR) (*(volatile unsigned long *)(ADDR)) - -#define __get_PDR() ({ __reg(0xfeff0400); }) -#define __set_PDR(V) do { __reg(0xfeff0400) = (V); mb(); } while(0) - -#define __get_GPDR() ({ __reg(0xfeff0408); }) -#define __set_GPDR(V) do { __reg(0xfeff0408) = (V); mb(); } while(0) - -#define __get_SIR() ({ __reg(0xfeff0410); }) -#define __set_SIR(V) do { __reg(0xfeff0410) = (V); mb(); } while(0) - -#define __get_SOR() ({ __reg(0xfeff0418); }) -#define __set_SOR(V) do { __reg(0xfeff0418) = (V); mb(); } while(0) - -#define __set_PDSR(V) do { __reg(0xfeff0420) = (V); mb(); } while(0) - -#define __set_PDCR(V) do { __reg(0xfeff0428) = (V); mb(); } while(0) - -#define __get_RSTR() ({ __reg(0xfeff0500); }) -#define __set_RSTR(V) do { __reg(0xfeff0500) = (V); mb(); } while(0) - - - -/* PDR definitions */ -#define PDR_GPIO_DATA(X) (1 << (X)) - -/* GPDR definitions */ -#define GPDR_INPUT 0 -#define GPDR_OUTPUT 1 -#define GPDR_DREQ0_BIT 0x00001000 -#define GPDR_DREQ1_BIT 0x00008000 -#define GPDR_DREQ2_BIT 0x00040000 -#define GPDR_DREQ3_BIT 0x00080000 -#define GPDR_DREQ4_BIT 0x00004000 -#define GPDR_DREQ5_BIT 0x00020000 -#define GPDR_DREQ6_BIT 0x00100000 -#define GPDR_DREQ7_BIT 0x00200000 -#define GPDR_DACK0_BIT 0x00002000 -#define GPDR_DACK1_BIT 0x00010000 -#define GPDR_DACK2_BIT 0x00100000 -#define GPDR_DACK3_BIT 0x00200000 -#define GPDR_DONE0_BIT 0x00004000 -#define GPDR_DONE1_BIT 0x00020000 -#define GPDR_GPIO_DIR(X,D) ((D) << (X)) - -/* SIR definitions */ -#define SIR_GPIO_INPUT 0 -#define SIR_DREQ7_INPUT 0x00200000 -#define SIR_DREQ6_INPUT 0x00100000 -#define SIR_DREQ3_INPUT 0x00080000 -#define SIR_DREQ2_INPUT 0x00040000 -#define SIR_DREQ5_INPUT 0x00020000 -#define SIR_DREQ1_INPUT 0x00008000 -#define SIR_DREQ4_INPUT 0x00004000 -#define SIR_DREQ0_INPUT 0x00001000 -#define SIR_RXD1_INPUT 0x00000400 -#define SIR_CTS0_INPUT 0x00000100 -#define SIR_RXD0_INPUT 0x00000040 -#define SIR_GATE1_INPUT 0x00000020 -#define SIR_GATE0_INPUT 0x00000010 -#define SIR_IRQ3_INPUT 0x00000008 -#define SIR_IRQ2_INPUT 0x00000004 -#define SIR_IRQ1_INPUT 0x00000002 -#define SIR_IRQ0_INPUT 0x00000001 -#define SIR_DREQ_BITS (SIR_DREQ0_INPUT | SIR_DREQ1_INPUT | \ - SIR_DREQ2_INPUT | SIR_DREQ3_INPUT | \ - SIR_DREQ4_INPUT | SIR_DREQ5_INPUT | \ - SIR_DREQ6_INPUT | SIR_DREQ7_INPUT) - -/* SOR definitions */ -#define SOR_GPIO_OUTPUT 0 -#define SOR_DACK3_OUTPUT 0x00200000 -#define SOR_DACK2_OUTPUT 0x00100000 -#define SOR_DONE1_OUTPUT 0x00020000 -#define SOR_DACK1_OUTPUT 0x00010000 -#define SOR_DONE0_OUTPUT 0x00004000 -#define SOR_DACK0_OUTPUT 0x00002000 -#define SOR_TXD1_OUTPUT 0x00000800 -#define SOR_RTS0_OUTPUT 0x00000200 -#define SOR_TXD0_OUTPUT 0x00000080 -#define SOR_TOUT1_OUTPUT 0x00000020 -#define SOR_TOUT0_OUTPUT 0x00000010 -#define SOR_DONE_BITS (SOR_DONE0_OUTPUT | SOR_DONE1_OUTPUT) -#define SOR_DACK_BITS (SOR_DACK0_OUTPUT | SOR_DACK1_OUTPUT | \ - SOR_DACK2_OUTPUT | SOR_DACK3_OUTPUT) - -/* PDSR definitions */ -#define PDSR_UNCHANGED 0 -#define PDSR_SET_BIT(X) (1 << (X)) - -/* PDCR definitions */ -#define PDCR_UNCHANGED 0 -#define PDCR_CLEAR_BIT(X) (1 << (X)) - -/* RSTR definitions */ -/* Read Only */ -#define RSTR_POWERON 0x00000400 -#define RSTR_SOFTRESET_STATUS 0x00000100 -/* Write Only */ -#define RSTR_SOFTRESET 0x00000001 - -#endif /* _ASM_GPIO_REGS */ diff --git a/arch/frv/include/asm/hardirq.h b/arch/frv/include/asm/hardirq.h deleted file mode 100644 index c62833d6ebbb..000000000000 --- a/arch/frv/include/asm/hardirq.h +++ /dev/null @@ -1,26 +0,0 @@ -/* hardirq.h: FRV hardware IRQ management - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ASM_HARDIRQ_H -#define __ASM_HARDIRQ_H - -#include <linux/atomic.h> - -extern atomic_t irq_err_count; -static inline void ack_bad_irq(int irq) -{ - atomic_inc(&irq_err_count); -} -#define ack_bad_irq ack_bad_irq - -#include <asm-generic/hardirq.h> - -#endif diff --git a/arch/frv/include/asm/highmem.h b/arch/frv/include/asm/highmem.h deleted file mode 100644 index 1f58938703ab..000000000000 --- a/arch/frv/include/asm/highmem.h +++ /dev/null @@ -1,149 +0,0 @@ -/* highmem.h: virtual kernel memory mappings for high memory - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-i386/highmem.h - * - * See Documentation/frv/mmu-layout.txt for more information. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_HIGHMEM_H -#define _ASM_HIGHMEM_H - -#ifdef __KERNEL__ - -#include <linux/init.h> -#include <linux/highmem.h> -#include <asm/mem-layout.h> -#include <asm/spr-regs.h> -#include <asm/mb-regs.h> - -#define NR_TLB_LINES 64 /* number of lines in the TLB */ - -#ifndef __ASSEMBLY__ - -#include <linux/interrupt.h> -#include <asm/kmap_types.h> -#include <asm/pgtable.h> - -#ifdef CONFIG_DEBUG_HIGHMEM -#define HIGHMEM_DEBUG 1 -#else -#define HIGHMEM_DEBUG 0 -#endif - -/* declarations for highmem.c */ -extern unsigned long highstart_pfn, highend_pfn; - -#define kmap_prot PAGE_KERNEL -#define kmap_pte ______kmap_pte_in_TLB -extern pte_t *pkmap_page_table; - -#define flush_cache_kmaps() do { } while (0) - -/* - * Right now we initialize only a single pte table. It can be extended - * easily, subsequent pte tables have to be allocated in one physical - * chunk of RAM. - */ -#define LAST_PKMAP PTRS_PER_PTE -#define LAST_PKMAP_MASK (LAST_PKMAP - 1) -#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) -#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) - -extern void *kmap_high(struct page *page); -extern void kunmap_high(struct page *page); - -extern void *kmap(struct page *page); -extern void kunmap(struct page *page); - -#endif /* !__ASSEMBLY__ */ - -/* - * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap - * gives a more generic (and caching) interface. But kmap_atomic can - * be used in IRQ contexts, so in some (very limited) cases we need - * it. - */ -#define KMAP_ATOMIC_CACHE_DAMR 8 - -#ifndef __ASSEMBLY__ - -#define __kmap_atomic_primary(cached, paddr, ampr) \ -({ \ - unsigned long damlr, dampr; \ - \ - dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \ - \ - if (!cached) \ - asm volatile("movgs %0,dampr"#ampr :: "r"(dampr) : "memory"); \ - else \ - /* cache flush page attachment point */ \ - asm volatile("movgs %0,iampr"#ampr"\n" \ - "movgs %0,dampr"#ampr"\n" \ - :: "r"(dampr) : "memory" \ - ); \ - \ - asm("movsg damlr"#ampr",%0" : "=r"(damlr)); \ - \ - /*printk("DAMR"#ampr": PRIM sl=%d L=%08lx P=%08lx\n", type, damlr, dampr);*/ \ - \ - (void *) damlr; \ -}) - -#define __kmap_atomic_secondary(slot, paddr) \ -({ \ - unsigned long damlr = KMAP_ATOMIC_SECONDARY_FRAME + (slot) * PAGE_SIZE; \ - unsigned long dampr = paddr | xAMPRx_L | xAMPRx_M | xAMPRx_S | xAMPRx_SS_16Kb | xAMPRx_V; \ - \ - asm volatile("movgs %0,tplr \n" \ - "movgs %1,tppr \n" \ - "tlbpr %0,gr0,#2,#1" \ - : : "r"(damlr), "r"(dampr) : "memory"); \ - \ - /*printk("TLB: SECN sl=%d L=%08lx P=%08lx\n", slot, damlr, dampr);*/ \ - \ - (void *) damlr; \ -}) - -static inline void *kmap_atomic_primary(struct page *page) -{ - unsigned long paddr; - - pagefault_disable(); - paddr = page_to_phys(page); - - return __kmap_atomic_primary(1, paddr, 2); -} - -#define __kunmap_atomic_primary(cached, ampr) \ -do { \ - asm volatile("movgs gr0,dampr"#ampr"\n" ::: "memory"); \ - if (cached) \ - asm volatile("movgs gr0,iampr"#ampr"\n" ::: "memory"); \ -} while(0) - -#define __kunmap_atomic_secondary(slot, vaddr) \ -do { \ - asm volatile("tlbpr %0,gr0,#4,#1" : : "r"(vaddr) : "memory"); \ -} while(0) - -static inline void kunmap_atomic_primary(void *kvaddr) -{ - __kunmap_atomic_primary(1, 2); - pagefault_enable(); -} - -void *kmap_atomic(struct page *page); -void __kunmap_atomic(void *kvaddr); - -#endif /* !__ASSEMBLY__ */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/frv/include/asm/hw_irq.h b/arch/frv/include/asm/hw_irq.h deleted file mode 100644 index 522ad37923d8..000000000000 --- a/arch/frv/include/asm/hw_irq.h +++ /dev/null @@ -1,16 +0,0 @@ -/* hw_irq.h: FR-V specific h/w IRQ stuff - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_HW_IRQ_H -#define _ASM_HW_IRQ_H - - -#endif /* _ASM_HW_IRQ_H */ diff --git a/arch/frv/include/asm/io.h b/arch/frv/include/asm/io.h deleted file mode 100644 index 8062fc73fad0..000000000000 --- a/arch/frv/include/asm/io.h +++ /dev/null @@ -1,414 +0,0 @@ -/* io.h: FRV I/O operations - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This gets interesting when talking to the PCI bus - the CPU is in big endian - * mode, the PCI bus is little endian and the hardware in the middle can do - * byte swapping - */ -#ifndef _ASM_IO_H -#define _ASM_IO_H - -#ifdef __KERNEL__ - -#define ARCH_HAS_IOREMAP_WT - -#include <linux/types.h> -#include <asm/virtconvert.h> -#include <asm/string.h> -#include <asm/mb-regs.h> -#include <asm-generic/pci_iomap.h> -#include <linux/delay.h> - -/* - * swap functions are sometimes needed to interface little-endian hardware - */ - -static inline unsigned short _swapw(unsigned short v) -{ - return ((v << 8) | (v >> 8)); -} - -static inline unsigned long _swapl(unsigned long v) -{ - return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24)); -} - -//#define __iormb() asm volatile("membar") -//#define __iowmb() asm volatile("membar") - -static inline u8 __raw_readb(const volatile void __iomem *addr) -{ - return __builtin_read8((volatile void __iomem *)addr); -} - -static inline u16 __raw_readw(const volatile void __iomem *addr) -{ - return __builtin_read16((volatile void __iomem *)addr); -} - -static inline u32 __raw_readl(const volatile void __iomem *addr) -{ - return __builtin_read32((volatile void __iomem *)addr); -} - -#define __raw_writeb(datum, addr) __builtin_write8(addr, datum) -#define __raw_writew(datum, addr) __builtin_write16(addr, datum) -#define __raw_writel(datum, addr) __builtin_write32(addr, datum) - -static inline void io_outsb(unsigned int addr, const void *buf, int len) -{ - unsigned long __ioaddr = (unsigned long) addr; - const uint8_t *bp = buf; - - while (len--) - __builtin_write8((volatile void __iomem *) __ioaddr, *bp++); -} - -static inline void io_outsw(unsigned int addr, const void *buf, int len) -{ - unsigned long __ioaddr = (unsigned long) addr; - const uint16_t *bp = buf; - - while (len--) - __builtin_write16((volatile void __iomem *) __ioaddr, (*bp++)); -} - -extern void __outsl_ns(unsigned int addr, const void *buf, int len); -extern void __outsl_sw(unsigned int addr, const void *buf, int len); -static inline void __outsl(unsigned int addr, const void *buf, int len, int swap) -{ - unsigned long __ioaddr = (unsigned long) addr; - - if (!swap) - __outsl_ns(__ioaddr, buf, len); - else - __outsl_sw(__ioaddr, buf, len); -} - -static inline void io_insb(unsigned long addr, void *buf, int len) -{ - uint8_t *bp = buf; - - while (len--) - *bp++ = __builtin_read8((volatile void __iomem *) addr); -} - -static inline void io_insw(unsigned long addr, void *buf, int len) -{ - uint16_t *bp = buf; - - while (len--) - *bp++ = __builtin_read16((volatile void __iomem *) addr); -} - -extern void __insl_ns(unsigned long addr, void *buf, int len); -extern void __insl_sw(unsigned long addr, void *buf, int len); -static inline void __insl(unsigned long addr, void *buf, int len, int swap) -{ - if (!swap) - __insl_ns(addr, buf, len); - else - __insl_sw(addr, buf, len); -} - -#define mmiowb() mb() - -/* - * make the short names macros so specific devices - * can override them as required - */ - -static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count) -{ - memset((void __force *) addr, val, count); -} - -static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count) -{ - memcpy(dst, (void __force *) src, count); -} - -static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count) -{ - memcpy((void __force *) dst, src, count); -} - -static inline uint8_t inb(unsigned long addr) -{ - return __builtin_read8((void __iomem *)addr); -} - -static inline uint16_t inw(unsigned long addr) -{ - uint16_t ret = __builtin_read16((void __iomem *)addr); - - if (__is_PCI_IO(addr)) - ret = _swapw(ret); - - return ret; -} - -static inline uint32_t inl(unsigned long addr) -{ - uint32_t ret = __builtin_read32((void __iomem *)addr); - - if (__is_PCI_IO(addr)) - ret = _swapl(ret); - - return ret; -} - -static inline void outb(uint8_t datum, unsigned long addr) -{ - __builtin_write8((void __iomem *)addr, datum); -} - -static inline void outw(uint16_t datum, unsigned long addr) -{ - if (__is_PCI_IO(addr)) - datum = _swapw(datum); - __builtin_write16((void __iomem *)addr, datum); -} - -static inline void outl(uint32_t datum, unsigned long addr) -{ - if (__is_PCI_IO(addr)) - datum = _swapl(datum); - __builtin_write32((void __iomem *)addr, datum); -} - -#define inb_p(addr) inb(addr) -#define inw_p(addr) inw(addr) -#define inl_p(addr) inl(addr) -#define outb_p(x,addr) outb(x,addr) -#define outw_p(x,addr) outw(x,addr) -#define outl_p(x,addr) outl(x,addr) - -#define outsb(a,b,l) io_outsb(a,b,l) -#define outsw(a,b,l) io_outsw(a,b,l) -#define outsl(a,b,l) __outsl(a,b,l,0) - -#define insb(a,b,l) io_insb(a,b,l) -#define insw(a,b,l) io_insw(a,b,l) -#define insl(a,b,l) __insl(a,b,l,0) - -#define IO_SPACE_LIMIT 0xffffffff - -static inline uint8_t readb(const volatile void __iomem *addr) -{ - return __builtin_read8((__force void volatile __iomem *) addr); -} - -static inline uint16_t readw(const volatile void __iomem *addr) -{ - uint16_t ret = __builtin_read16((__force void volatile __iomem *)addr); - - if (__is_PCI_MEM(addr)) - ret = _swapw(ret); - return ret; -} - -static inline uint32_t readl(const volatile void __iomem *addr) -{ - uint32_t ret = __builtin_read32((__force void volatile __iomem *)addr); - - if (__is_PCI_MEM(addr)) - ret = _swapl(ret); - - return ret; -} - -#define readb_relaxed readb -#define readw_relaxed readw -#define readl_relaxed readl - -static inline void writeb(uint8_t datum, volatile void __iomem *addr) -{ - __builtin_write8(addr, datum); - if (__is_PCI_MEM(addr)) - __flush_PCI_writes(); -} - -static inline void writew(uint16_t datum, volatile void __iomem *addr) -{ - if (__is_PCI_MEM(addr)) - datum = _swapw(datum); - - __builtin_write16(addr, datum); - if (__is_PCI_MEM(addr)) - __flush_PCI_writes(); -} - -static inline void writel(uint32_t datum, volatile void __iomem *addr) -{ - if (__is_PCI_MEM(addr)) - datum = _swapl(datum); - - __builtin_write32(addr, datum); - if (__is_PCI_MEM(addr)) - __flush_PCI_writes(); -} - -#define writeb_relaxed writeb -#define writew_relaxed writew -#define writel_relaxed writel - -/* Values for nocacheflag and cmode */ -#define IOMAP_FULL_CACHING 0 -#define IOMAP_NOCACHE_SER 1 -#define IOMAP_NOCACHE_NONSER 2 -#define IOMAP_WRITETHROUGH 3 - -extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag); - -static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} - -static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_NOCACHE_SER); -} - -static inline void __iomem *ioremap_wt(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_WRITETHROUGH); -} - -static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned long size) -{ - return __ioremap(physaddr, size, IOMAP_FULL_CACHING); -} - -#define ioremap_wc ioremap_nocache -#define ioremap_uc ioremap_nocache - -extern void iounmap(void volatile __iomem *addr); - -static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - return (void __iomem *) port; -} - -static inline void ioport_unmap(void __iomem *p) -{ -} - -static inline void flush_write_buffers(void) -{ - __asm__ __volatile__ ("membar" : : :"memory"); -} - -/* - * do appropriate I/O accesses for token type - */ -static inline unsigned int ioread8(void __iomem *p) -{ - return __builtin_read8(p); -} - -static inline unsigned int ioread16(void __iomem *p) -{ - uint16_t ret = __builtin_read16(p); - if (__is_PCI_addr(p)) - ret = _swapw(ret); - return ret; -} - -static inline unsigned int ioread32(void __iomem *p) -{ - uint32_t ret = __builtin_read32(p); - if (__is_PCI_addr(p)) - ret = _swapl(ret); - return ret; -} - -static inline void iowrite8(u8 val, void __iomem *p) -{ - __builtin_write8(p, val); - if (__is_PCI_MEM(p)) - __flush_PCI_writes(); -} - -static inline void iowrite16(u16 val, void __iomem *p) -{ - if (__is_PCI_addr(p)) - val = _swapw(val); - __builtin_write16(p, val); - if (__is_PCI_MEM(p)) - __flush_PCI_writes(); -} - -static inline void iowrite32(u32 val, void __iomem *p) -{ - if (__is_PCI_addr(p)) - val = _swapl(val); - __builtin_write32(p, val); - if (__is_PCI_MEM(p)) - __flush_PCI_writes(); -} - -#define ioread16be(addr) be16_to_cpu(ioread16(addr)) -#define ioread32be(addr) be32_to_cpu(ioread32(addr)) -#define iowrite16be(v, addr) iowrite16(cpu_to_be16(v), (addr)) -#define iowrite32be(v, addr) iowrite32(cpu_to_be32(v), (addr)) - -static inline void ioread8_rep(void __iomem *p, void *dst, unsigned long count) -{ - io_insb((unsigned long) p, dst, count); -} - -static inline void ioread16_rep(void __iomem *p, void *dst, unsigned long count) -{ - io_insw((unsigned long) p, dst, count); -} - -static inline void ioread32_rep(void __iomem *p, void *dst, unsigned long count) -{ - __insl_ns((unsigned long) p, dst, count); -} - -static inline void iowrite8_rep(void __iomem *p, const void *src, unsigned long count) -{ - io_outsb((unsigned long) p, src, count); -} - -static inline void iowrite16_rep(void __iomem *p, const void *src, unsigned long count) -{ - io_outsw((unsigned long) p, src, count); -} - -static inline void iowrite32_rep(void __iomem *p, const void *src, unsigned long count) -{ - __outsl_ns((unsigned long) p, src, count); -} - -/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */ -struct pci_dev; -static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p) -{ -} - - -/* - * Convert a physical pointer to a virtual kernel pointer for /dev/mem - * access - */ -#define xlate_dev_mem_ptr(p) __va(p) - -/* - * Convert a virtual cached pointer to an uncached pointer - */ -#define xlate_dev_kmem_ptr(p) p - -#endif /* __KERNEL__ */ - -#endif /* _ASM_IO_H */ diff --git a/arch/frv/include/asm/irc-regs.h b/arch/frv/include/asm/irc-regs.h deleted file mode 100644 index afa30aeacc82..000000000000 --- a/arch/frv/include/asm/irc-regs.h +++ /dev/null @@ -1,53 +0,0 @@ -/* irc-regs.h: on-chip interrupt controller registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_IRC_REGS -#define _ASM_IRC_REGS - -#define __reg(ADDR) (*(volatile unsigned long *)(ADDR)) - -#define __get_TM0() ({ __reg(0xfeff9800); }) -#define __get_TM1() ({ __reg(0xfeff9808); }) -#define __set_TM1(V) do { __reg(0xfeff9808) = (V); mb(); } while(0) - -#define __set_TM1x(XI,V) \ -do { \ - int shift = (XI) * 2 + 16; \ - unsigned long tm1 = __reg(0xfeff9808); \ - tm1 &= ~(0x3 << shift); \ - tm1 |= (V) << shift; \ - __reg(0xfeff9808) = tm1; \ - mb(); \ -} while(0) - -#define __get_RS(C) ({ (__reg(0xfeff9810) >> ((C)+16)) & 1; }) - -#define __clr_RC(C) do { __reg(0xfeff9818) = 1 << ((C)+16); mb(); } while(0) - -#define __get_MASK(C) ({ (__reg(0xfeff9820) >> ((C)+16)) & 1; }) -#define __set_MASK(C) do { __reg(0xfeff9820) |= 1 << ((C)+16); mb(); } while(0) -#define __clr_MASK(C) do { __reg(0xfeff9820) &= ~(1 << ((C)+16)); mb(); } while(0) - -#define __get_MASK_all() __get_MASK(0) -#define __set_MASK_all() __set_MASK(0) -#define __clr_MASK_all() __clr_MASK(0) - -#define __get_IRL() ({ (__reg(0xfeff9828) >> 16) & 0xf; }) -#define __clr_IRL() do { __reg(0xfeff9828) = 0x100000; mb(); } while(0) - -#define __get_IRR(N) ({ __reg(0xfeff9840 + (N) * 8); }) -#define __set_IRR(N,V) do { __reg(0xfeff9840 + (N) * 8) = (V); } while(0) - -#define __get_IITMR(N) ({ __reg(0xfeff9880 + (N) * 8); }) -#define __set_IITMR(N,V) do { __reg(0xfeff9880 + (N) * 8) = (V); } while(0) - - -#endif /* _ASM_IRC_REGS */ diff --git a/arch/frv/include/asm/irq.h b/arch/frv/include/asm/irq.h deleted file mode 100644 index 3a66ebd754bd..000000000000 --- a/arch/frv/include/asm/irq.h +++ /dev/null @@ -1,30 +0,0 @@ -/* irq.h: FRV IRQ definitions - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_IRQ_H_ -#define _ASM_IRQ_H_ - -#define NR_IRQS 48 -#define IRQ_BASE_CPU (0 * 16) -#define IRQ_BASE_FPGA (1 * 16) -#define IRQ_BASE_MB93493 (2 * 16) - -/* probe returns a 32-bit IRQ mask:-/ */ -#define MIN_PROBE_IRQ (NR_IRQS - 32) - -#ifndef __ASSEMBLY__ -static inline int irq_canonicalize(int irq) -{ - return irq; -} -#endif - -#endif /* _ASM_IRQ_H_ */ diff --git a/arch/frv/include/asm/irq_regs.h b/arch/frv/include/asm/irq_regs.h deleted file mode 100644 index d22e83289ad1..000000000000 --- a/arch/frv/include/asm/irq_regs.h +++ /dev/null @@ -1,27 +0,0 @@ -/* FRV per-CPU frame pointer holder - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_IRQ_REGS_H -#define _ASM_IRQ_REGS_H - -/* - * Per-cpu current frame pointer - the location of the last exception frame on - * the stack - * - on FRV, GR28 is dedicated to keeping a pointer to the current exception - * frame - */ -#define ARCH_HAS_OWN_IRQ_REGS - -#ifndef __ASSEMBLY__ -#define get_irq_regs() (__frame) -#endif - -#endif /* _ASM_IRQ_REGS_H */ diff --git a/arch/frv/include/asm/irqflags.h b/arch/frv/include/asm/irqflags.h deleted file mode 100644 index 82f0b5363f42..000000000000 --- a/arch/frv/include/asm/irqflags.h +++ /dev/null @@ -1,158 +0,0 @@ -/* FR-V interrupt handling - * - * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_IRQFLAGS_H -#define _ASM_IRQFLAGS_H - -/* - * interrupt flag manipulation - * - use virtual interrupt management since touching the PSR is slow - * - ICC2.Z: T if interrupts virtually disabled - * - ICC2.C: F if interrupts really disabled - * - if Z==1 upon interrupt: - * - C is set to 0 - * - interrupts are really disabled - * - entry.S returns immediately - * - uses TIHI (TRAP if Z==0 && C==0) #2 to really reenable interrupts - * - if taken, the trap: - * - sets ICC2.C - * - enables interrupts - */ -static inline void arch_local_irq_disable(void) -{ - /* set Z flag, but don't change the C flag */ - asm volatile(" andcc gr0,gr0,gr0,icc2 \n" - : - : - : "memory", "icc2" - ); -} - -static inline void arch_local_irq_enable(void) -{ - /* clear Z flag and then test the C flag */ - asm volatile(" oricc gr0,#1,gr0,icc2 \n" - " tihi icc2,gr0,#2 \n" - : - : - : "memory", "icc2" - ); -} - -static inline unsigned long arch_local_save_flags(void) -{ - unsigned long flags; - - asm volatile("movsg ccr,%0" - : "=r"(flags) - : - : "memory"); - - /* shift ICC2.Z to bit 0 */ - flags >>= 26; - - /* make flags 1 if interrupts disabled, 0 otherwise */ - return flags & 1UL; - -} - -static inline unsigned long arch_local_irq_save(void) -{ - unsigned long flags = arch_local_save_flags(); - arch_local_irq_disable(); - return flags; -} - -static inline void arch_local_irq_restore(unsigned long flags) -{ - /* load the Z flag by turning 1 if disabled into 0 if disabled - * and thus setting the Z flag but not the C flag */ - asm volatile(" xoricc %0,#1,gr0,icc2 \n" - /* then trap if Z=0 and C=0 */ - " tihi icc2,gr0,#2 \n" - : - : "r"(flags) - : "memory", "icc2" - ); - -} - -static inline bool arch_irqs_disabled_flags(unsigned long flags) -{ - return flags; -} - -static inline bool arch_irqs_disabled(void) -{ - return arch_irqs_disabled_flags(arch_local_save_flags()); -} - -/* - * real interrupt flag manipulation - */ -#define __arch_local_irq_disable() \ -do { \ - unsigned long psr; \ - asm volatile(" movsg psr,%0 \n" \ - " andi %0,%2,%0 \n" \ - " ori %0,%1,%0 \n" \ - " movgs %0,psr \n" \ - : "=r"(psr) \ - : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ - : "memory"); \ -} while (0) - -#define __arch_local_irq_enable() \ -do { \ - unsigned long psr; \ - asm volatile(" movsg psr,%0 \n" \ - " andi %0,%1,%0 \n" \ - " movgs %0,psr \n" \ - : "=r"(psr) \ - : "i" (~PSR_PIL) \ - : "memory"); \ -} while (0) - -#define __arch_local_save_flags(flags) \ -do { \ - typecheck(unsigned long, flags); \ - asm("movsg psr,%0" \ - : "=r"(flags) \ - : \ - : "memory"); \ -} while (0) - -#define __arch_local_irq_save(flags) \ -do { \ - unsigned long npsr; \ - typecheck(unsigned long, flags); \ - asm volatile(" movsg psr,%0 \n" \ - " andi %0,%3,%1 \n" \ - " ori %1,%2,%1 \n" \ - " movgs %1,psr \n" \ - : "=r"(flags), "=r"(npsr) \ - : "i" (PSR_PIL_14), "i" (~PSR_PIL) \ - : "memory"); \ -} while (0) - -#define __arch_local_irq_restore(flags) \ -do { \ - typecheck(unsigned long, flags); \ - asm volatile(" movgs %0,psr \n" \ - : \ - : "r" (flags) \ - : "memory"); \ -} while (0) - -#define __arch_irqs_disabled() \ - ((__get_PSR() & PSR_PIL) >= PSR_PIL_14) - -#endif /* _ASM_IRQFLAGS_H */ diff --git a/arch/frv/include/asm/kdebug.h b/arch/frv/include/asm/kdebug.h deleted file mode 100644 index 6ece1b037665..000000000000 --- a/arch/frv/include/asm/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/arch/frv/include/asm/kmap_types.h b/arch/frv/include/asm/kmap_types.h deleted file mode 100644 index 0849db1362d6..000000000000 --- a/arch/frv/include/asm/kmap_types.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -#ifndef _ASM_KMAP_TYPES_H -#define _ASM_KMAP_TYPES_H - -#define KM_TYPE_NR 17 - -#endif diff --git a/arch/frv/include/asm/linkage.h b/arch/frv/include/asm/linkage.h deleted file mode 100644 index 636c1bced7d4..000000000000 --- a/arch/frv/include/asm/linkage.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_LINKAGE_H -#define __ASM_LINKAGE_H - -#define __ALIGN .align 4 -#define __ALIGN_STR ".align 4" - -#endif diff --git a/arch/frv/include/asm/local.h b/arch/frv/include/asm/local.h deleted file mode 100644 index 259ae7b041a7..000000000000 --- a/arch/frv/include/asm/local.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_LOCAL_H -#define _ASM_LOCAL_H - -#include <asm-generic/local.h> - -#endif /* _ASM_LOCAL_H */ diff --git a/arch/frv/include/asm/local64.h b/arch/frv/include/asm/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/frv/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local64.h> diff --git a/arch/frv/include/asm/math-emu.h b/arch/frv/include/asm/math-emu.h deleted file mode 100644 index 8af762dd6109..000000000000 --- a/arch/frv/include/asm/math-emu.h +++ /dev/null @@ -1,302 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_MATH_EMU_H -#define _ASM_MATH_EMU_H - -#include <asm/setup.h> -#include <linux/linkage.h> - -/* Status Register bits */ - -/* accrued exception bits */ -#define FPSR_AEXC_INEX 3 -#define FPSR_AEXC_DZ 4 -#define FPSR_AEXC_UNFL 5 -#define FPSR_AEXC_OVFL 6 -#define FPSR_AEXC_IOP 7 - -/* exception status bits */ -#define FPSR_EXC_INEX1 8 -#define FPSR_EXC_INEX2 9 -#define FPSR_EXC_DZ 10 -#define FPSR_EXC_UNFL 11 -#define FPSR_EXC_OVFL 12 -#define FPSR_EXC_OPERR 13 -#define FPSR_EXC_SNAN 14 -#define FPSR_EXC_BSUN 15 - -/* quotient byte, assumes big-endian, of course */ -#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1)) - -/* condition code bits */ -#define FPSR_CC_NAN 24 -#define FPSR_CC_INF 25 -#define FPSR_CC_Z 26 -#define FPSR_CC_NEG 27 - - -/* Control register bits */ - -/* rounding mode */ -#define FPCR_ROUND_RN 0 /* round to nearest/even */ -#define FPCR_ROUND_RZ 1 /* round to zero */ -#define FPCR_ROUND_RM 2 /* minus infinity */ -#define FPCR_ROUND_RP 3 /* plus infinity */ - -/* rounding precision */ -#define FPCR_PRECISION_X 0 /* long double */ -#define FPCR_PRECISION_S 1 /* double */ -#define FPCR_PRECISION_D 2 /* float */ - - -/* Flags to select the debugging output */ -#define PDECODE 0 -#define PEXECUTE 1 -#define PCONV 2 -#define PNORM 3 -#define PREGISTER 4 -#define PINSTR 5 -#define PUNIMPL 6 -#define PMOVEM 7 - -#define PMDECODE (1<<PDECODE) -#define PMEXECUTE (1<<PEXECUTE) -#define PMCONV (1<<PCONV) -#define PMNORM (1<<PNORM) -#define PMREGISTER (1<<PREGISTER) -#define PMINSTR (1<<PINSTR) -#define PMUNIMPL (1<<PUNIMPL) -#define PMMOVEM (1<<PMOVEM) - -#ifndef __ASSEMBLY__ - -#include <linux/kernel.h> -#include <linux/sched.h> - -union fp_mant64 { - unsigned long long m64; - unsigned long m32[2]; -}; - -union fp_mant128 { - unsigned long long m64[2]; - unsigned long m32[4]; -}; - -/* internal representation of extended fp numbers */ -struct fp_ext { - unsigned char lowmant; - unsigned char sign; - unsigned short exp; - union fp_mant64 mant; -}; - -/* C representation of FPU registers */ -/* NOTE: if you change this, you have to change the assembler offsets - below and the size in <asm/fpu.h>, too */ -struct fp_data { - struct fp_ext fpreg[8]; - unsigned int fpcr; - unsigned int fpsr; - unsigned int fpiar; - unsigned short prec; - unsigned short rnd; - struct fp_ext temp[2]; -}; - -#if FPU_EMU_DEBUG -extern unsigned int fp_debugprint; - -#define dprint(bit, fmt, args...) ({ \ - if (fp_debugprint & (1 << (bit))) \ - printk(fmt, ## args); \ -}) -#else -#define dprint(bit, fmt, args...) -#endif - -#define uprint(str) ({ \ - static int __count = 3; \ - \ - if (__count > 0) { \ - printk("You just hit an unimplemented " \ - "fpu instruction (%s)\n", str); \ - printk("Please report this to ....\n"); \ - __count--; \ - } \ -}) - -#define FPDATA ((struct fp_data *)current->thread.fp) - -#else /* __ASSEMBLY__ */ - -#define FPDATA %a2 - -/* offsets from the base register to the floating point data in the task struct */ -#define FPD_FPREG (TASK_THREAD+THREAD_FPREG+0) -#define FPD_FPCR (TASK_THREAD+THREAD_FPREG+96) -#define FPD_FPSR (TASK_THREAD+THREAD_FPREG+100) -#define FPD_FPIAR (TASK_THREAD+THREAD_FPREG+104) -#define FPD_PREC (TASK_THREAD+THREAD_FPREG+108) -#define FPD_RND (TASK_THREAD+THREAD_FPREG+110) -#define FPD_TEMPFP1 (TASK_THREAD+THREAD_FPREG+112) -#define FPD_TEMPFP2 (TASK_THREAD+THREAD_FPREG+124) -#define FPD_SIZEOF (TASK_THREAD+THREAD_FPREG+136) - -/* offsets on the stack to access saved registers, - * these are only used during instruction decoding - * where we always know how deep we're on the stack. - */ -#define FPS_DO (PT_D0) -#define FPS_D1 (PT_D1) -#define FPS_D2 (PT_D2) -#define FPS_A0 (PT_A0) -#define FPS_A1 (PT_A1) -#define FPS_A2 (PT_A2) -#define FPS_SR (PT_SR) -#define FPS_PC (PT_PC) -#define FPS_EA (PT_PC+6) -#define FPS_PC2 (PT_PC+10) - -.macro fp_get_fp_reg - lea (FPD_FPREG,FPDATA,%d0.w*4),%a0 - lea (%a0,%d0.w*8),%a0 -.endm - -/* Macros used to get/put the current program counter. - * 020/030 use a different stack frame then 040/060, for the - * 040/060 the return pc points already to the next location, - * so this only needs to be modified for jump instructions. - */ -.macro fp_get_pc dest - move.l (FPS_PC+4,%sp),\dest -.endm - -.macro fp_put_pc src,jump=0 - move.l \src,(FPS_PC+4,%sp) -.endm - -.macro fp_get_instr_data f,s,dest,label - getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4) - addq.l #\s,%sp@(FPS_PC+4) -.endm - -.macro fp_get_instr_word dest,label,addr - fp_get_instr_data w,2,\dest,\label,\addr -.endm - -.macro fp_get_instr_long dest,label,addr - fp_get_instr_data l,4,\dest,\label,\addr -.endm - -/* These macros are used to read from/write to user space - * on error we jump to the fixup section, load the fault - * address into %a0 and jump to the exit. - * (derived from <asm/uaccess.h>) - */ -.macro getuser size,src,dest,label,addr -| printf ,"[\size<%08x]",1,\addr -.Lu1\@: moves\size \src,\dest - - .section .fixup,"ax" - .even -.Lu2\@: move.l \addr,%a0 - jra \label - .previous - - .section __ex_table,"a" - .align 4 - .long .Lu1\@,.Lu2\@ - .previous -.endm - -.macro putuser size,src,dest,label,addr -| printf ,"[\size>%08x]",1,\addr -.Lu1\@: moves\size \src,\dest -.Lu2\@: - - .section .fixup,"ax" - .even -.Lu3\@: move.l \addr,%a0 - jra \label - .previous - - .section __ex_table,"a" - .align 4 - .long .Lu1\@,.Lu3\@ - .long .Lu2\@,.Lu3\@ - .previous -.endm - - -.macro movestack nr,arg1,arg2,arg3,arg4,arg5 - .if \nr - movestack (\nr-1),\arg2,\arg3,\arg4,\arg5 - move.l \arg1,-(%sp) - .endif -.endm - -.macro printf bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5 -#ifdef FPU_EMU_DEBUG - .data -.Lpdata\@: - .string "\string" - .previous - - movem.l %d0/%d1/%a0/%a1,-(%sp) - .if \bit+1 -#if 0 - moveq #\bit,%d0 - andw #7,%d0 - btst %d0,fp_debugprint+((31-\bit)/8) -#else - btst #\bit,fp_debugprint+((31-\bit)/8) -#endif - jeq .Lpskip\@ - .endif - movestack \nr,\arg1,\arg2,\arg3,\arg4,\arg5 - pea .Lpdata\@ - jsr printk - lea ((\nr+1)*4,%sp),%sp -.Lpskip\@: - movem.l (%sp)+,%d0/%d1/%a0/%a1 -#endif -.endm - -.macro printx bit,fp -#ifdef FPU_EMU_DEBUG - movem.l %d0/%a0,-(%sp) - lea \fp,%a0 -#if 0 - moveq #'+',%d0 - tst.w (%a0) - jeq .Lx1\@ - moveq #'-',%d0 -.Lx1\@: printf \bit," %c",1,%d0 - move.l (4,%a0),%d0 - bclr #31,%d0 - jne .Lx2\@ - printf \bit,"0." - jra .Lx3\@ -.Lx2\@: printf \bit,"1." -.Lx3\@: printf \bit,"%08x%08x",2,%d0,%a0@(8) - move.w (2,%a0),%d0 - ext.l %d0 - printf \bit,"E%04x",1,%d0 -#else - printf \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8) -#endif - movem.l (%sp)+,%d0/%a0 -#endif -.endm - -.macro debug instr,args -#ifdef FPU_EMU_DEBUG - \instr \args -#endif -.endm - - -#endif /* __ASSEMBLY__ */ - -#endif /* _ASM_FRV_MATH_EMU_H */ - diff --git a/arch/frv/include/asm/mb-regs.h b/arch/frv/include/asm/mb-regs.h deleted file mode 100644 index 219e5f926f18..000000000000 --- a/arch/frv/include/asm/mb-regs.h +++ /dev/null @@ -1,200 +0,0 @@ -/* mb-regs.h: motherboard registers - * - * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB_REGS_H -#define _ASM_MB_REGS_H - -#include <asm/cpu-irqs.h> -#include <asm/sections.h> -#include <asm/mem-layout.h> - -#ifndef __ASSEMBLY__ -/* gcc builtins, annotated */ - -unsigned long __builtin_read8(volatile void __iomem *); -unsigned long __builtin_read16(volatile void __iomem *); -unsigned long __builtin_read32(volatile void __iomem *); -void __builtin_write8(volatile void __iomem *, unsigned char); -void __builtin_write16(volatile void __iomem *, unsigned short); -void __builtin_write32(volatile void __iomem *, unsigned long); -#endif - -#define __region_IO KERNEL_IO_START /* the region from 0xe0000000 to 0xffffffff has suitable - * protection laid over the top for use in memory-mapped - * I/O - */ - -#define __region_CS0 0xff000000 /* Boot ROMs area */ - -#ifdef CONFIG_MB93091_VDK -/* - * VDK motherboard and CPU card specific stuff - */ - -#include <asm/mb93091-fpga-irqs.h> - -#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0 -#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1 - -#define __region_CS2 0xe0000000 /* SLBUS/PCI I/O space */ -#define __region_CS2_M 0x0fffffff /* mask */ -#define __region_CS2_C 0x00000000 /* control */ -#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */ -#define __region_CS5_M 0x00ffffff -#define __region_CS5_C 0x00010000 -#define __region_CS7 0xf1000000 /* CB70 CPU-card PCMCIA port I/O space */ -#define __region_CS7_M 0x00ffffff -#define __region_CS7_C 0x00410701 -#define __region_CS1 0xfc000000 /* SLBUS/PCI bridge control registers */ -#define __region_CS1_M 0x000fffff -#define __region_CS1_C 0x00000000 -#define __region_CS6 0xfc100000 /* CB70 CPU-card DM9000 LAN I/O space */ -#define __region_CS6_M 0x000fffff -#define __region_CS6_C 0x00400707 -#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */ -#define __region_CS3_M 0x000fffff -#define __region_CS3_C 0xc8100000 -#define __region_CS4 0xfd000000 /* CB70 CPU-card extra flash space */ -#define __region_CS4_M 0x00ffffff -#define __region_CS4_C 0x00000f07 - -#define __region_PCI_IO (__region_CS2 + 0x04000000UL) -#define __region_PCI_MEM (__region_CS2 + 0x08000000UL) -#define __flush_PCI_writes() \ -do { \ - __builtin_write8((volatile void __iomem *) __region_PCI_MEM, 0); \ -} while(0) - -#define __is_PCI_IO(addr) \ - (((unsigned long)(addr) >> 24) - (__region_PCI_IO >> 24) < (0x04000000UL >> 24)) - -#define __is_PCI_MEM(addr) \ - ((unsigned long)(addr) - __region_PCI_MEM < 0x08000000UL) - -#define __is_PCI_addr(addr) \ - ((unsigned long)(addr) - __region_PCI_IO < 0x0c000000UL) - -#define __get_CLKSW() ({ *(volatile unsigned long *)(__region_CS2 + 0x0130000cUL) & 0xffUL; }) -#define __get_CLKIN() (__get_CLKSW() * 125U * 100000U / 24U) - -#ifndef __ASSEMBLY__ -extern int __nongprelbss mb93090_mb00_detected; -#endif - -#define __addr_LEDS() (__region_CS2 + 0x01200004UL) -#ifdef CONFIG_MB93090_MB00 -#define __set_LEDS(X) \ -do { \ - if (mb93090_mb00_detected) \ - __builtin_write32((void __iomem *) __addr_LEDS(), ~(X)); \ -} while (0) -#else -#define __set_LEDS(X) -#endif - -#define __addr_LCD() (__region_CS2 + 0x01200008UL) -#define __get_LCD(B) __builtin_read32((volatile void __iomem *) (B)) -#define __set_LCD(B,X) __builtin_write32((volatile void __iomem *) (B), (X)) - -#define LCD_D 0x000000ff /* LCD data bus */ -#define LCD_RW 0x00000100 /* LCD R/W signal */ -#define LCD_RS 0x00000200 /* LCD Register Select */ -#define LCD_E 0x00000400 /* LCD Start Enable Signal */ - -#define LCD_CMD_CLEAR (LCD_E|0x001) -#define LCD_CMD_HOME (LCD_E|0x002) -#define LCD_CMD_CURSOR_INC (LCD_E|0x004) -#define LCD_CMD_SCROLL_INC (LCD_E|0x005) -#define LCD_CMD_CURSOR_DEC (LCD_E|0x006) -#define LCD_CMD_SCROLL_DEC (LCD_E|0x007) -#define LCD_CMD_OFF (LCD_E|0x008) -#define LCD_CMD_ON(CRSR,BLINK) (LCD_E|0x00c|(CRSR<<1)|BLINK) -#define LCD_CMD_CURSOR_MOVE_L (LCD_E|0x010) -#define LCD_CMD_CURSOR_MOVE_R (LCD_E|0x014) -#define LCD_CMD_DISPLAY_SHIFT_L (LCD_E|0x018) -#define LCD_CMD_DISPLAY_SHIFT_R (LCD_E|0x01c) -#define LCD_CMD_FUNCSET(DL,N,F) (LCD_E|0x020|(DL<<4)|(N<<3)|(F<<2)) -#define LCD_CMD_SET_CG_ADDR(X) (LCD_E|0x040|X) -#define LCD_CMD_SET_DD_ADDR(X) (LCD_E|0x080|X) -#define LCD_CMD_READ_BUSY (LCD_E|LCD_RW) -#define LCD_DATA_WRITE(X) (LCD_E|LCD_RS|(X)) -#define LCD_DATA_READ (LCD_E|LCD_RS|LCD_RW) - -#else -/* - * PDK unit specific stuff - */ - -#include <asm/mb93093-fpga-irqs.h> - -#define IRQ_CPU_MB93493_0 IRQ_CPU_EXTERNAL0 -#define IRQ_CPU_MB93493_1 IRQ_CPU_EXTERNAL1 - -#define __region_CS5 0xf0000000 /* MB93493 CSC area (DAV daughter board) */ -#define __region_CS5_M 0x00ffffff /* mask */ -#define __region_CS5_C 0x00010000 /* control */ -#define __region_CS2 0x20000000 /* FPGA registers */ -#define __region_CS2_M 0x000fffff -#define __region_CS2_C 0x00000000 -#define __region_CS1 0xfc100000 /* LAN registers */ -#define __region_CS1_M 0x000fffff -#define __region_CS1_C 0x00010404 -#define __region_CS3 0xfc200000 /* MB93493 CSR area (DAV daughter board) */ -#define __region_CS3_M 0x000fffff -#define __region_CS3_C 0xc8000000 -#define __region_CS4 0xfd000000 /* extra ROMs area */ -#define __region_CS4_M 0x00ffffff -#define __region_CS4_C 0x00000f07 - -#define __region_CS6 0xfe000000 /* not used - hide behind CPU resource I/O regs */ -#define __region_CS6_M 0x000fffff -#define __region_CS6_C 0x00000f07 -#define __region_CS7 0xfe000000 /* not used - hide behind CPU resource I/O regs */ -#define __region_CS7_M 0x000fffff -#define __region_CS7_C 0x00000f07 - -#define __is_PCI_IO(addr) 0 /* no PCI */ -#define __is_PCI_MEM(addr) 0 -#define __is_PCI_addr(addr) 0 -#define __region_PCI_IO 0 -#define __region_PCI_MEM 0 -#define __flush_PCI_writes() do { } while(0) - -#define __get_CLKSW() 0UL -#define __get_CLKIN() 66000000UL - -#define __addr_LEDS() (__region_CS2 + 0x00000023UL) -#define __set_LEDS(X) __builtin_write8((volatile void __iomem *) __addr_LEDS(), (X)) - -#define __addr_FPGATR() (__region_CS2 + 0x00000030UL) -#define __set_FPGATR(X) __builtin_write32((volatile void __iomem *) __addr_FPGATR(), (X)) -#define __get_FPGATR() __builtin_read32((volatile void __iomem *) __addr_FPGATR()) - -#define MB93093_FPGA_FPGATR_AUDIO_CLK 0x00000003 - -#define __set_FPGATR_AUDIO_CLK(V) \ - __set_FPGATR((__get_FPGATR() & ~MB93093_FPGA_FPGATR_AUDIO_CLK) | (V)) - -#define MB93093_FPGA_FPGATR_AUDIO_CLK_OFF 0x0 -#define MB93093_FPGA_FPGATR_AUDIO_CLK_11MHz 0x1 -#define MB93093_FPGA_FPGATR_AUDIO_CLK_12MHz 0x2 -#define MB93093_FPGA_FPGATR_AUDIO_CLK_02MHz 0x3 - -#define MB93093_FPGA_SWR_PUSHSWMASK (0x1F<<26) -#define MB93093_FPGA_SWR_PUSHSW4 (1<<29) - -#define __addr_FPGA_SWR ((volatile void __iomem *)(__region_CS2 + 0x28UL)) -#define __get_FPGA_PUSHSW1_5() (__builtin_read32(__addr_FPGA_SWR) & MB93093_FPGA_SWR_PUSHSWMASK) - - -#endif - -#endif /* _ASM_MB_REGS_H */ diff --git a/arch/frv/include/asm/mb86943a.h b/arch/frv/include/asm/mb86943a.h deleted file mode 100644 index e87ef924bfb4..000000000000 --- a/arch/frv/include/asm/mb86943a.h +++ /dev/null @@ -1,42 +0,0 @@ -/* mb86943a.h: MB86943 SPARClite <-> PCI bridge registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB86943A_H -#define _ASM_MB86943A_H - -#include <asm/mb-regs.h> - -#define __reg_MB86943_sl_ctl *(volatile uint32_t *) (__region_CS1 + 0x00) - -#define MB86943_SL_CTL_BUS_WIDTH_64 0x00000001 -#define MB86943_SL_CTL_AS_HOST 0x00000002 -#define MB86943_SL_CTL_DRCT_MASTER_SWAP 0x00000004 -#define MB86943_SL_CTL_DRCT_SLAVE_SWAP 0x00000008 -#define MB86943_SL_CTL_PCI_CONFIG_SWAP 0x00000010 -#define MB86943_SL_CTL_ECS0_ENABLE 0x00000020 -#define MB86943_SL_CTL_ECS1_ENABLE 0x00000040 -#define MB86943_SL_CTL_ECS2_ENABLE 0x00000080 - -#define __reg_MB86943_ecs_ctl(N) *(volatile uint32_t *) (__region_CS1 + 0x08 + (0x08*(N))) -#define __reg_MB86943_ecs_range(N) *(volatile uint32_t *) (__region_CS1 + 0x20 + (0x10*(N))) -#define __reg_MB86943_ecs_base(N) *(volatile uint32_t *) (__region_CS1 + 0x28 + (0x10*(N))) - -#define __reg_MB86943_sl_pci_io_range *(volatile uint32_t *) (__region_CS1 + 0x50) -#define __reg_MB86943_sl_pci_io_base *(volatile uint32_t *) (__region_CS1 + 0x58) -#define __reg_MB86943_sl_pci_mem_range *(volatile uint32_t *) (__region_CS1 + 0x60) -#define __reg_MB86943_sl_pci_mem_base *(volatile uint32_t *) (__region_CS1 + 0x68) -#define __reg_MB86943_pci_sl_io_base *(volatile uint32_t *) (__region_CS1 + 0x70) -#define __reg_MB86943_pci_sl_mem_base *(volatile uint32_t *) (__region_CS1 + 0x78) - -#define __reg_MB86943_pci_arbiter *(volatile uint32_t *) (__region_CS2 + 0x01300014) -#define MB86943_PCIARB_EN 0x00000001 - -#endif /* _ASM_MB86943A_H */ diff --git a/arch/frv/include/asm/mb93091-fpga-irqs.h b/arch/frv/include/asm/mb93091-fpga-irqs.h deleted file mode 100644 index 19778c5ba9d6..000000000000 --- a/arch/frv/include/asm/mb93091-fpga-irqs.h +++ /dev/null @@ -1,42 +0,0 @@ -/* mb93091-fpga-irqs.h: MB93091 CPU board FPGA IRQs - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB93091_FPGA_IRQS_H -#define _ASM_MB93091_FPGA_IRQS_H - -#include <asm/irq.h> - -#ifndef __ASSEMBLY__ - -/* IRQ IDs presented to drivers */ -enum { - IRQ_FPGA__UNUSED = IRQ_BASE_FPGA, - IRQ_FPGA_SYSINT_BUS_EXPANSION_1, - IRQ_FPGA_SL_BUS_EXPANSION_2, - IRQ_FPGA_PCI_INTD, - IRQ_FPGA_PCI_INTC, - IRQ_FPGA_PCI_INTB, - IRQ_FPGA_PCI_INTA, - IRQ_FPGA_SL_BUS_EXPANSION_7, - IRQ_FPGA_SYSINT_BUS_EXPANSION_8, - IRQ_FPGA_SL_BUS_EXPANSION_9, - IRQ_FPGA_MB86943_PCI_INTA, - IRQ_FPGA_MB86943_SLBUS_SIDE, - IRQ_FPGA_RTL8029_INTA, - IRQ_FPGA_SYSINT_BUS_EXPANSION_13, - IRQ_FPGA_SL_BUS_EXPANSION_14, - IRQ_FPGA_NMI, -}; - - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_MB93091_FPGA_IRQS_H */ diff --git a/arch/frv/include/asm/mb93093-fpga-irqs.h b/arch/frv/include/asm/mb93093-fpga-irqs.h deleted file mode 100644 index 590266b1a6d3..000000000000 --- a/arch/frv/include/asm/mb93093-fpga-irqs.h +++ /dev/null @@ -1,29 +0,0 @@ -/* mb93093-fpga-irqs.h: MB93093 CPU board FPGA IRQs - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB93093_FPGA_IRQS_H -#define _ASM_MB93093_FPGA_IRQS_H - -#include <asm/irq.h> - -#ifndef __ASSEMBLY__ - -/* IRQ IDs presented to drivers */ -enum { - IRQ_FPGA_PUSH_BUTTON_SW1_5 = IRQ_BASE_FPGA + 8, - IRQ_FPGA_ROCKER_C_SW8 = IRQ_BASE_FPGA + 9, - IRQ_FPGA_ROCKER_C_SW9 = IRQ_BASE_FPGA + 10, -}; - - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_MB93093_FPGA_IRQS_H */ diff --git a/arch/frv/include/asm/mb93493-irqs.h b/arch/frv/include/asm/mb93493-irqs.h deleted file mode 100644 index 82c7aeddd333..000000000000 --- a/arch/frv/include/asm/mb93493-irqs.h +++ /dev/null @@ -1,50 +0,0 @@ -/* mb93493-irqs.h: MB93493 companion chip IRQs - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB93493_IRQS_H -#define _ASM_MB93493_IRQS_H - -#include <asm/irq.h> - -#ifndef __ASSEMBLY__ - -/* IRQ IDs presented to drivers */ -enum { - IRQ_MB93493_VDC = IRQ_BASE_MB93493 + 0, - IRQ_MB93493_VCC = IRQ_BASE_MB93493 + 1, - IRQ_MB93493_AUDIO_OUT = IRQ_BASE_MB93493 + 2, - IRQ_MB93493_I2C_0 = IRQ_BASE_MB93493 + 3, - IRQ_MB93493_I2C_1 = IRQ_BASE_MB93493 + 4, - IRQ_MB93493_USB = IRQ_BASE_MB93493 + 5, - IRQ_MB93493_LOCAL_BUS = IRQ_BASE_MB93493 + 7, - IRQ_MB93493_PCMCIA = IRQ_BASE_MB93493 + 8, - IRQ_MB93493_GPIO = IRQ_BASE_MB93493 + 9, - IRQ_MB93493_AUDIO_IN = IRQ_BASE_MB93493 + 10, -}; - -/* IRQ multiplexor mappings */ -#define ROUTE_VIA_IRQ0 0 /* route IRQ by way of CPU external IRQ 0 */ -#define ROUTE_VIA_IRQ1 1 /* route IRQ by way of CPU external IRQ 1 */ - -#define IRQ_MB93493_VDC_ROUTE ROUTE_VIA_IRQ0 -#define IRQ_MB93493_VCC_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_AUDIO_OUT_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_I2C_0_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_I2C_1_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_USB_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_LOCAL_BUS_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_PCMCIA_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_GPIO_ROUTE ROUTE_VIA_IRQ1 -#define IRQ_MB93493_AUDIO_IN_ROUTE ROUTE_VIA_IRQ1 - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_MB93493_IRQS_H */ diff --git a/arch/frv/include/asm/mb93493-regs.h b/arch/frv/include/asm/mb93493-regs.h deleted file mode 100644 index 8a1f6aac8cf1..000000000000 --- a/arch/frv/include/asm/mb93493-regs.h +++ /dev/null @@ -1,281 +0,0 @@ -/* mb93493-regs.h: MB93493 companion chip registers - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MB93493_REGS_H -#define _ASM_MB93493_REGS_H - -#include <asm/mb-regs.h> -#include <asm/mb93493-irqs.h> - -#define __addr_MB93493(X) ((volatile unsigned long *)(__region_CS3 + (X))) -#define __get_MB93493(X) ({ *(volatile unsigned long *)(__region_CS3 + (X)); }) - -#define __set_MB93493(X,V) \ -do { \ - *(volatile unsigned long *)(__region_CS3 + (X)) = (V); mb(); \ -} while(0) - -#define __get_MB93493_STSR(X) __get_MB93493(0x3c0 + (X) * 4) -#define __set_MB93493_STSR(X,V) __set_MB93493(0x3c0 + (X) * 4, (V)) -#define MB93493_STSR_EN - -#define __addr_MB93493_IQSR(X) __addr_MB93493(0x3d0 + (X) * 4) -#define __get_MB93493_IQSR(X) __get_MB93493(0x3d0 + (X) * 4) -#define __set_MB93493_IQSR(X,V) __set_MB93493(0x3d0 + (X) * 4, (V)) - -#define __get_MB93493_DQSR(X) __get_MB93493(0x3e0 + (X) * 4) -#define __set_MB93493_DQSR(X,V) __set_MB93493(0x3e0 + (X) * 4, (V)) - -#define __get_MB93493_LBSER() __get_MB93493(0x3f0) -#define __set_MB93493_LBSER(V) __set_MB93493(0x3f0, (V)) - -#define MB93493_LBSER_VDC 0x00010000 -#define MB93493_LBSER_VCC 0x00020000 -#define MB93493_LBSER_AUDIO 0x00040000 -#define MB93493_LBSER_I2C_0 0x00080000 -#define MB93493_LBSER_I2C_1 0x00100000 -#define MB93493_LBSER_USB 0x00200000 -#define MB93493_LBSER_GPIO 0x00800000 -#define MB93493_LBSER_PCMCIA 0x01000000 - -#define __get_MB93493_LBSR() __get_MB93493(0x3fc) -#define __set_MB93493_LBSR(V) __set_MB93493(0x3fc, (V)) - -/* - * video display controller - */ -#define __get_MB93493_VDC(X) __get_MB93493(MB93493_VDC_##X) -#define __set_MB93493_VDC(X,V) __set_MB93493(MB93493_VDC_##X, (V)) - -#define MB93493_VDC_RCURSOR 0x140 /* cursor position */ -#define MB93493_VDC_RCT1 0x144 /* cursor colour 1 */ -#define MB93493_VDC_RCT2 0x148 /* cursor colour 2 */ -#define MB93493_VDC_RHDC 0x150 /* horizontal display period */ -#define MB93493_VDC_RH_MARGINS 0x154 /* horizontal margin sizes */ -#define MB93493_VDC_RVDC 0x158 /* vertical display period */ -#define MB93493_VDC_RV_MARGINS 0x15c /* vertical margin sizes */ -#define MB93493_VDC_RC 0x170 /* VDC control */ -#define MB93493_VDC_RCLOCK 0x174 /* clock divider, DMA req delay */ -#define MB93493_VDC_RBLACK 0x178 /* black insert sizes */ -#define MB93493_VDC_RS 0x17c /* VDC status */ - -#define __addr_MB93493_VDC_BCI(X) ({ (volatile unsigned long *)(__region_CS3 + 0x000 + (X)); }) -#define __addr_MB93493_VDC_TPO(X) (__region_CS3 + 0x1c0 + (X)) - -#define VDC_TPO_WIDTH 32 - -#define VDC_RC_DSR 0x00000080 /* VDC master reset */ - -#define VDC_RS_IT 0x00060000 /* interrupt indicators */ -#define VDC_RS_IT_UNDERFLOW 0x00040000 /* - underflow event */ -#define VDC_RS_IT_VSYNC 0x00020000 /* - VSYNC event */ -#define VDC_RS_DFI 0x00010000 /* current interlace field number */ -#define VDC_RS_DFI_TOP 0x00000000 /* - top field */ -#define VDC_RS_DFI_BOTTOM 0x00010000 /* - bottom field */ -#define VDC_RS_DCSR 0x00000010 /* cursor state */ -#define VDC_RS_DCM 0x00000003 /* display mode */ -#define VDC_RS_DCM_DISABLED 0x00000000 /* - display disabled */ -#define VDC_RS_DCM_STOPPED 0x00000001 /* - VDC stopped */ -#define VDC_RS_DCM_FREERUNNING 0x00000002 /* - VDC free-running */ -#define VDC_RS_DCM_TRANSFERRING 0x00000003 /* - data being transferred to VDC */ - -/* - * video capture controller - */ -#define __get_MB93493_VCC(X) __get_MB93493(MB93493_VCC_##X) -#define __set_MB93493_VCC(X,V) __set_MB93493(MB93493_VCC_##X, (V)) - -#define MB93493_VCC_RREDUCT 0x104 /* reduction rate */ -#define MB93493_VCC_RHY 0x108 /* horizontal brightness filter coefficients */ -#define MB93493_VCC_RHC 0x10c /* horizontal colour-difference filter coefficients */ -#define MB93493_VCC_RHSIZE 0x110 /* horizontal cycle sizes */ -#define MB93493_VCC_RHBC 0x114 /* horizontal back porch size */ -#define MB93493_VCC_RVCC 0x118 /* vertical capture period */ -#define MB93493_VCC_RVBC 0x11c /* vertical back porch period */ -#define MB93493_VCC_RV 0x120 /* vertical filter coefficients */ -#define MB93493_VCC_RDTS 0x128 /* DMA transfer size */ -#define MB93493_VCC_RDTS_4B 0x01000000 /* 4-byte transfer */ -#define MB93493_VCC_RDTS_32B 0x03000000 /* 32-byte transfer */ -#define MB93493_VCC_RDTS_SHIFT 24 -#define MB93493_VCC_RCC 0x130 /* VCC control */ -#define MB93493_VCC_RIS 0x134 /* VCC interrupt status */ - -#define __addr_MB93493_VCC_TPI(X) (__region_CS3 + 0x180 + (X)) - -#define VCC_RHSIZE_RHCC 0x000007ff -#define VCC_RHSIZE_RHCC_SHIFT 0 -#define VCC_RHSIZE_RHTCC 0x0fff0000 -#define VCC_RHSIZE_RHTCC_SHIFT 16 - -#define VCC_RVBC_RVBC 0x00003f00 -#define VCC_RVBC_RVBC_SHIFT 8 - -#define VCC_RREDUCT_RHR 0x07ff0000 -#define VCC_RREDUCT_RHR_SHIFT 16 -#define VCC_RREDUCT_RVR 0x000007ff -#define VCC_RREDUCT_RVR_SHIFT 0 - -#define VCC_RCC_CE 0x00000001 /* VCC enable */ -#define VCC_RCC_CS 0x00000002 /* request video capture start */ -#define VCC_RCC_CPF 0x0000000c /* pixel format */ -#define VCC_RCC_CPF_YCBCR_16 0x00000000 /* - YCbCr 4:2:2 16-bit format */ -#define VCC_RCC_CPF_RGB 0x00000004 /* - RGB 4:4:4 format */ -#define VCC_RCC_CPF_YCBCR_24 0x00000008 /* - YCbCr 4:2:2 24-bit format */ -#define VCC_RCC_CPF_BT656 0x0000000c /* - ITU R-BT.656 format */ -#define VCC_RCC_CPF_SHIFT 2 -#define VCC_RCC_CSR 0x00000080 /* request reset */ -#define VCC_RCC_HSIP 0x00000100 /* HSYNC polarity */ -#define VCC_RCC_HSIP_LOACT 0x00000000 /* - low active */ -#define VCC_RCC_HSIP_HIACT 0x00000100 /* - high active */ -#define VCC_RCC_VSIP 0x00000200 /* VSYNC polarity */ -#define VCC_RCC_VSIP_LOACT 0x00000000 /* - low active */ -#define VCC_RCC_VSIP_HIACT 0x00000200 /* - high active */ -#define VCC_RCC_CIE 0x00000800 /* interrupt enable */ -#define VCC_RCC_CFP 0x00001000 /* RGB pixel packing */ -#define VCC_RCC_CFP_4TO3 0x00000000 /* - pack 4 pixels into 3 words */ -#define VCC_RCC_CFP_1TO1 0x00001000 /* - pack 1 pixel into 1 words */ -#define VCC_RCC_CSM 0x00006000 /* interlace specification */ -#define VCC_RCC_CSM_ONEPASS 0x00002000 /* - non-interlaced */ -#define VCC_RCC_CSM_INTERLACE 0x00004000 /* - interlaced */ -#define VCC_RCC_CSM_SHIFT 13 -#define VCC_RCC_ES 0x00008000 /* capture start polarity */ -#define VCC_RCC_ES_NEG 0x00000000 /* - negative edge */ -#define VCC_RCC_ES_POS 0x00008000 /* - positive edge */ -#define VCC_RCC_IFI 0x00080000 /* inferlace field evaluation reverse */ -#define VCC_RCC_FDTS 0x00300000 /* interlace field start */ -#define VCC_RCC_FDTS_3_8 0x00000000 /* - 3/8 of horizontal entire cycle */ -#define VCC_RCC_FDTS_1_4 0x00100000 /* - 1/4 of horizontal entire cycle */ -#define VCC_RCC_FDTS_7_16 0x00200000 /* - 7/16 of horizontal entire cycle */ -#define VCC_RCC_FDTS_SHIFT 20 -#define VCC_RCC_MOV 0x00400000 /* test bit - always set to 1 */ -#define VCC_RCC_STP 0x00800000 /* request video capture stop */ -#define VCC_RCC_TO 0x01000000 /* input during top-field only */ - -#define VCC_RIS_VSYNC 0x01000000 /* VSYNC interrupt */ -#define VCC_RIS_OV 0x02000000 /* overflow interrupt */ -#define VCC_RIS_BOTTOM 0x08000000 /* interlace bottom field */ -#define VCC_RIS_STARTED 0x10000000 /* capture started */ - -/* - * I2C - */ -#define MB93493_I2C_BSR 0x340 /* bus status */ -#define MB93493_I2C_BCR 0x344 /* bus control */ -#define MB93493_I2C_CCR 0x348 /* clock control */ -#define MB93493_I2C_ADR 0x34c /* address */ -#define MB93493_I2C_DTR 0x350 /* data */ -#define MB93493_I2C_BC2R 0x35c /* bus control 2 */ - -#define __addr_MB93493_I2C(port,X) (__region_CS3 + MB93493_I2C_##X + ((port)*0x20)) -#define __get_MB93493_I2C(port,X) __get_MB93493(MB93493_I2C_##X + ((port)*0x20)) -#define __set_MB93493_I2C(port,X,V) __set_MB93493(MB93493_I2C_##X + ((port)*0x20), (V)) - -#define I2C_BSR_BB (1 << 7) - -/* - * audio controller (I2S) registers - */ -#define __get_MB93493_I2S(X) __get_MB93493(MB93493_I2S_##X) -#define __set_MB93493_I2S(X,V) __set_MB93493(MB93493_I2S_##X, (V)) - -#define MB93493_I2S_ALDR 0x300 /* L-channel data */ -#define MB93493_I2S_ARDR 0x304 /* R-channel data */ -#define MB93493_I2S_APDR 0x308 /* 16-bit packed data */ -#define MB93493_I2S_AISTR 0x310 /* status */ -#define MB93493_I2S_AICR 0x314 /* control */ - -#define __addr_MB93493_I2S_ALDR(X) (__region_CS3 + MB93493_I2S_ALDR + (X)) -#define __addr_MB93493_I2S_ARDR(X) (__region_CS3 + MB93493_I2S_ARDR + (X)) -#define __addr_MB93493_I2S_APDR(X) (__region_CS3 + MB93493_I2S_APDR + (X)) -#define __addr_MB93493_I2S_ADR(X) (__region_CS3 + 0x320 + (X)) - -#define I2S_AISTR_OTST 0x00000003 /* status of output data transfer */ -#define I2S_AISTR_OTR 0x00000010 /* output transfer request pending */ -#define I2S_AISTR_OUR 0x00000020 /* output FIFO underrun detected */ -#define I2S_AISTR_OOR 0x00000040 /* output FIFO overrun detected */ -#define I2S_AISTR_ODS 0x00000100 /* output DMA transfer size */ -#define I2S_AISTR_ODE 0x00000400 /* output DMA transfer request enable */ -#define I2S_AISTR_OTRIE 0x00001000 /* output transfer request interrupt enable */ -#define I2S_AISTR_OURIE 0x00002000 /* output FIFO underrun interrupt enable */ -#define I2S_AISTR_OORIE 0x00004000 /* output FIFO overrun interrupt enable */ -#define I2S_AISTR__OUT_MASK 0x00007570 -#define I2S_AISTR_ITST 0x00030000 /* status of input data transfer */ -#define I2S_AISTR_ITST_SHIFT 16 -#define I2S_AISTR_ITR 0x00100000 /* input transfer request pending */ -#define I2S_AISTR_IUR 0x00200000 /* input FIFO underrun detected */ -#define I2S_AISTR_IOR 0x00400000 /* input FIFO overrun detected */ -#define I2S_AISTR_IDS 0x01000000 /* input DMA transfer size */ -#define I2S_AISTR_IDE 0x04000000 /* input DMA transfer request enable */ -#define I2S_AISTR_ITRIE 0x10000000 /* input transfer request interrupt enable */ -#define I2S_AISTR_IURIE 0x20000000 /* input FIFO underrun interrupt enable */ -#define I2S_AISTR_IORIE 0x40000000 /* input FIFO overrun interrupt enable */ -#define I2S_AISTR__IN_MASK 0x75700000 - -#define I2S_AICR_MI 0x00000001 /* mono input requested */ -#define I2S_AICR_AMI 0x00000002 /* relation between LRCKI/FS1 and SDI */ -#define I2S_AICR_LRI 0x00000004 /* function of LRCKI pin */ -#define I2S_AICR_SDMI 0x00000070 /* format of input audio data */ -#define I2S_AICR_SDMI_SHIFT 4 -#define I2S_AICR_CLI 0x00000080 /* input FIFO clearing control */ -#define I2S_AICR_IM 0x00000300 /* input state control */ -#define I2S_AICR_IM_SHIFT 8 -#define I2S_AICR__IN_MASK 0x000003f7 -#define I2S_AICR_MO 0x00001000 /* mono output requested */ -#define I2S_AICR_AMO 0x00002000 /* relation between LRCKO/FS0 and SDO */ -#define I2S_AICR_AMO_SHIFT 13 -#define I2S_AICR_LRO 0x00004000 /* function of LRCKO pin */ -#define I2S_AICR_SDMO 0x00070000 /* format of output audio data */ -#define I2S_AICR_SDMO_SHIFT 16 -#define I2S_AICR_CLO 0x00080000 /* output FIFO clearing control */ -#define I2S_AICR_OM 0x00100000 /* output state control */ -#define I2S_AICR__OUT_MASK 0x001f7000 -#define I2S_AICR_DIV 0x03000000 /* frequency division rate */ -#define I2S_AICR_DIV_SHIFT 24 -#define I2S_AICR_FL 0x20000000 /* frame length */ -#define I2S_AICR_FS 0x40000000 /* frame sync method */ -#define I2S_AICR_ME 0x80000000 /* master enable */ - -/* - * PCMCIA - */ -#define __addr_MB93493_PCMCIA(X) ((volatile unsigned long *)(__region_CS5 + (X))) - -/* - * GPIO - */ -#define __get_MB93493_GPIO_PDR(X) __get_MB93493(0x380 + (X) * 0xc0) -#define __set_MB93493_GPIO_PDR(X,V) __set_MB93493(0x380 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_GPDR(X) __get_MB93493(0x384 + (X) * 0xc0) -#define __set_MB93493_GPIO_GPDR(X,V) __set_MB93493(0x384 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_SIR(X) __get_MB93493(0x388 + (X) * 0xc0) -#define __set_MB93493_GPIO_SIR(X,V) __set_MB93493(0x388 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_SOR(X) __get_MB93493(0x38c + (X) * 0xc0) -#define __set_MB93493_GPIO_SOR(X,V) __set_MB93493(0x38c + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_PDSR(X) __get_MB93493(0x390 + (X) * 0xc0) -#define __set_MB93493_GPIO_PDSR(X,V) __set_MB93493(0x390 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_PDCR(X) __get_MB93493(0x394 + (X) * 0xc0) -#define __set_MB93493_GPIO_PDCR(X,V) __set_MB93493(0x394 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_INTST(X) __get_MB93493(0x398 + (X) * 0xc0) -#define __set_MB93493_GPIO_INTST(X,V) __set_MB93493(0x398 + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_IEHL(X) __get_MB93493(0x39c + (X) * 0xc0) -#define __set_MB93493_GPIO_IEHL(X,V) __set_MB93493(0x39c + (X) * 0xc0, (V)) - -#define __get_MB93493_GPIO_IELH(X) __get_MB93493(0x3a0 + (X) * 0xc0) -#define __set_MB93493_GPIO_IELH(X,V) __set_MB93493(0x3a0 + (X) * 0xc0, (V)) - -#endif /* _ASM_MB93493_REGS_H */ diff --git a/arch/frv/include/asm/mem-layout.h b/arch/frv/include/asm/mem-layout.h deleted file mode 100644 index e9a0ec85a402..000000000000 --- a/arch/frv/include/asm/mem-layout.h +++ /dev/null @@ -1,86 +0,0 @@ -/* mem-layout.h: memory layout - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MEM_LAYOUT_H -#define _ASM_MEM_LAYOUT_H - -#ifndef __ASSEMBLY__ -#define __UL(X) ((unsigned long) (X)) -#else -#define __UL(X) (X) -#endif - -/* - * PAGE_SHIFT determines the page size - */ -#define PAGE_SHIFT 14 - -#ifndef __ASSEMBLY__ -#define PAGE_SIZE (1UL << PAGE_SHIFT) -#else -#define PAGE_SIZE (1 << PAGE_SHIFT) -#endif - -#define PAGE_MASK (~(PAGE_SIZE-1)) - -/* - * the slab must be aligned such that load- and store-double instructions don't - * fault if used - */ -#define ARCH_DMA_MINALIGN L1_CACHE_BYTES -#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES - -/*****************************************************************************/ -/* - * virtual memory layout from kernel's point of view - */ -#define PAGE_OFFSET ((unsigned long) &__page_offset) - -#ifdef CONFIG_MMU - -/* see Documentation/frv/mmu-layout.txt */ -#define KERNEL_LOWMEM_START __UL(0xc0000000) -#define KERNEL_LOWMEM_END __UL(0xd0000000) -#define VMALLOC_START __UL(0xd0000000) -#define VMALLOC_END __UL(0xd8000000) -#define PKMAP_BASE __UL(0xd8000000) -#define PKMAP_END __UL(0xdc000000) -#define KMAP_ATOMIC_SECONDARY_FRAME __UL(0xdc000000) -#define KMAP_ATOMIC_PRIMARY_FRAME __UL(0xdd000000) - -#endif - -#define KERNEL_IO_START __UL(0xe0000000) - - -/*****************************************************************************/ -/* - * memory layout from userspace's point of view - */ -#define BRK_BASE __UL(2 * 1024 * 1024 + PAGE_SIZE) -#define STACK_TOP __UL(2 * 1024 * 1024) -#define STACK_TOP_MAX __UL(0xc0000000) - -/* userspace process size */ -#ifdef CONFIG_MMU -#define TASK_SIZE (PAGE_OFFSET) -#else -#define TASK_SIZE __UL(0xFFFFFFFFUL) -#endif - -/* base of area at which unspecified mmaps will start */ -#ifdef CONFIG_BINFMT_ELF_FDPIC -#define TASK_UNMAPPED_BASE __UL(16 * 1024 * 1024) -#else -#define TASK_UNMAPPED_BASE __UL(TASK_SIZE / 3) -#endif - -#endif /* _ASM_MEM_LAYOUT_H */ diff --git a/arch/frv/include/asm/mmu.h b/arch/frv/include/asm/mmu.h deleted file mode 100644 index 86ca0e86e7d2..000000000000 --- a/arch/frv/include/asm/mmu.h +++ /dev/null @@ -1,41 +0,0 @@ -/* mmu.h: memory management context for FR-V with or without MMU support - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_MMU_H -#define _ASM_MMU_H - -typedef struct { -#ifdef CONFIG_MMU - struct list_head id_link; /* link in list of context ID owners */ - unsigned short id; /* MMU context ID */ - unsigned short id_busy; /* true if ID is in CXNR */ - unsigned long itlb_cached_pge; /* [SCR0] PGE cached for insn TLB handler */ - unsigned long itlb_ptd_mapping; /* [DAMR4] PTD mapping for itlb cached PGE */ - unsigned long dtlb_cached_pge; /* [SCR1] PGE cached for data TLB handler */ - unsigned long dtlb_ptd_mapping; /* [DAMR5] PTD mapping for dtlb cached PGE */ - -#else - unsigned long end_brk; - -#endif - -#ifdef CONFIG_BINFMT_ELF_FDPIC - unsigned long exec_fdpic_loadmap; - unsigned long interp_fdpic_loadmap; -#endif - -} mm_context_t; - -#ifdef CONFIG_MMU -extern int __nongpreldata cxn_pinned; -extern int cxn_pin_by_pid(pid_t pid); -#endif - -#endif /* _ASM_MMU_H */ diff --git a/arch/frv/include/asm/mmu_context.h b/arch/frv/include/asm/mmu_context.h deleted file mode 100644 index c7daa395156a..000000000000 --- a/arch/frv/include/asm/mmu_context.h +++ /dev/null @@ -1,50 +0,0 @@ -/* mmu_context.h: MMU context management routines - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_MMU_CONTEXT_H -#define _ASM_MMU_CONTEXT_H - -#include <asm/setup.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm-generic/mm_hooks.h> - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -} - -#ifdef CONFIG_MMU -extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm); -extern void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *_pgd); -extern void destroy_context(struct mm_struct *mm); - -#else -#define init_new_context(tsk, mm) ({ 0; }) -#define change_mm_context(old, ctx, _pml4) do {} while(0) -#define destroy_context(mm) do {} while(0) -#endif - -#define switch_mm(prev, next, tsk) \ -do { \ - if (prev != next) \ - change_mm_context(&prev->context, &next->context, next->pgd); \ -} while(0) - -#define activate_mm(prev, next) \ -do { \ - change_mm_context(&prev->context, &next->context, next->pgd); \ -} while(0) - -#define deactivate_mm(tsk, mm) \ -do { \ -} while(0) - -#endif diff --git a/arch/frv/include/asm/module.h b/arch/frv/include/asm/module.h deleted file mode 100644 index a8848f09a217..000000000000 --- a/arch/frv/include/asm/module.h +++ /dev/null @@ -1,22 +0,0 @@ -/* module.h: FRV module stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_MODULE_H -#define _ASM_MODULE_H - -#include <asm-generic/module.h> - -/* - * Include the architecture version. - */ -#define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " " - -#endif /* _ASM_MODULE_H */ - diff --git a/arch/frv/include/asm/page.h b/arch/frv/include/asm/page.h deleted file mode 100644 index 0f76a0d586f6..000000000000 --- a/arch/frv/include/asm/page.h +++ /dev/null @@ -1,74 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_PAGE_H -#define _ASM_PAGE_H - -#include <asm/virtconvert.h> -#include <asm/mem-layout.h> -#include <asm/sections.h> -#include <asm/setup.h> - -#ifndef __ASSEMBLY__ - -#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE) -#define copy_page(to,from) memcpy((to), (from), PAGE_SIZE) - -#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE) -#define copy_user_page(vto, vfrom, vaddr, topg) memcpy((vto), (vfrom), PAGE_SIZE) - -/* - * These are used to make use of C type-checking.. - */ -typedef struct { unsigned long pte; } pte_t; -typedef struct { unsigned long ste[64];} pmd_t; -typedef struct { pmd_t pue[1]; } pud_t; -typedef struct { pud_t pge[1]; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; -typedef struct page *pgtable_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).ste[0]) -#define pud_val(x) ((x).pue[0]) -#define pgd_val(x) ((x).pge[0]) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { { (x) } } ) -#define __pud(x) ((pud_t) { (x) } ) -#define __pgd(x) ((pgd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) -#define PTE_MASK PAGE_MASK - -#define devmem_is_allowed(pfn) 1 - -#define __pa(vaddr) virt_to_phys((void *) (unsigned long) (vaddr)) -#define __va(paddr) phys_to_virt((unsigned long) (paddr)) - -#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) - -extern unsigned long max_low_pfn; -extern unsigned long min_low_pfn; -extern unsigned long max_pfn; - -#ifdef CONFIG_MMU -#define pfn_valid(pfn) ((pfn) < max_mapnr) -#else -#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT) -#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) - -#endif - -#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) -#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) - - -#define VM_DATA_DEFAULT_FLAGS \ - (VM_READ | VM_WRITE | \ - ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ - VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) - -#endif /* __ASSEMBLY__ */ - -#include <asm-generic/memory_model.h> -#include <asm-generic/getorder.h> - -#endif /* _ASM_PAGE_H */ diff --git a/arch/frv/include/asm/pci.h b/arch/frv/include/asm/pci.h deleted file mode 100644 index 895af9d558ba..000000000000 --- a/arch/frv/include/asm/pci.h +++ /dev/null @@ -1,40 +0,0 @@ -/* pci.h: FR-V specific PCI declarations - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from include/asm-m68k/pci.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_FRV_PCI_H -#define _ASM_FRV_PCI_H - -#include <linux/mm.h> -#include <linux/scatterlist.h> -#include <asm-generic/pci.h> - -#define pcibios_assign_all_busses() 0 - -#ifdef CONFIG_MMU -extern void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle); -extern void consistent_free(void *vaddr); -extern void consistent_sync(void *vaddr, size_t size, int direction); -extern void consistent_sync_page(struct page *page, unsigned long offset, - size_t size, int direction); -#endif - -/* Return the index of the PCI controller for device PDEV. */ -#define pci_controller_num(PDEV) (0) - -/* - * These are pretty much arbitrary with the CoMEM implementation. - * We have the whole address space to ourselves. - */ -#define PCIBIOS_MIN_IO 0x100 -#define PCIBIOS_MIN_MEM 0x00010000 - -#endif /* _ASM_FRV_PCI_H */ diff --git a/arch/frv/include/asm/percpu.h b/arch/frv/include/asm/percpu.h deleted file mode 100644 index 4209fe5fe0a2..000000000000 --- a/arch/frv/include/asm/percpu.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_PERCPU_H -#define __ASM_PERCPU_H - -#include <asm-generic/percpu.h> - -#endif /* __ASM_PERCPU_H */ diff --git a/arch/frv/include/asm/perf_event.h b/arch/frv/include/asm/perf_event.h deleted file mode 100644 index c52ea5546b5b..000000000000 --- a/arch/frv/include/asm/perf_event.h +++ /dev/null @@ -1,15 +0,0 @@ -/* FRV performance event support - * - * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_PERF_EVENT_H -#define _ASM_PERF_EVENT_H - -#endif /* _ASM_PERF_EVENT_H */ diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h deleted file mode 100644 index 416d19a632f2..000000000000 --- a/arch/frv/include/asm/pgalloc.h +++ /dev/null @@ -1,69 +0,0 @@ -/* pgalloc.h: Page allocation routines for FRV - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Derived from: - * include/asm-m68knommu/pgalloc.h - * include/asm-i386/pgalloc.h - */ -#ifndef _ASM_PGALLOC_H -#define _ASM_PGALLOC_H - -#include <asm/setup.h> -#include <asm/virtconvert.h> - -#ifdef CONFIG_MMU - -#define pmd_populate_kernel(mm, pmd, pte) __set_pmd(pmd, __pa(pte) | _PAGE_TABLE) -#define pmd_populate(MM, PMD, PAGE) \ -do { \ - __set_pmd((PMD), page_to_pfn(PAGE) << PAGE_SHIFT | _PAGE_TABLE); \ -} while(0) -#define pmd_pgtable(pmd) pmd_page(pmd) - -/* - * Allocate and free page tables. - */ - -extern pgd_t *pgd_alloc(struct mm_struct *); -extern void pgd_free(struct mm_struct *mm, pgd_t *); - -extern pte_t *pte_alloc_one_kernel(struct mm_struct *, unsigned long); - -extern pgtable_t pte_alloc_one(struct mm_struct *, unsigned long); - -static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) -{ - free_page((unsigned long)pte); -} - -static inline void pte_free(struct mm_struct *mm, pgtable_t pte) -{ - pgtable_page_dtor(pte); - __free_page(pte); -} - -#define __pte_free_tlb(tlb,pte,address) \ -do { \ - pgtable_page_dtor(pte); \ - tlb_remove_page((tlb),(pte)); \ -} while (0) - -/* - * allocating and freeing a pmd is trivial: the 1-entry pmd is - * inside the pgd, so has no extra memory associated with it. - * (In the PAE case we free the pmds as part of the pgd.) - */ -#define pmd_alloc_one(mm, addr) ({ BUG(); ((pmd_t *) 2); }) -#define pmd_free(mm, x) do { } while (0) -#define __pmd_free_tlb(tlb,x,a) do { } while (0) - -#endif /* CONFIG_MMU */ - -#endif /* _ASM_PGALLOC_H */ diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h deleted file mode 100644 index ab6e7e961b54..000000000000 --- a/arch/frv/include/asm/pgtable.h +++ /dev/null @@ -1,528 +0,0 @@ -/* pgtable.h: FR-V page table mangling - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Derived from: - * include/asm-m68knommu/pgtable.h - * include/asm-i386/pgtable.h - */ - -#ifndef _ASM_PGTABLE_H -#define _ASM_PGTABLE_H - -#include <asm-generic/5level-fixup.h> -#include <asm/mem-layout.h> -#include <asm/setup.h> -#include <asm/processor.h> - -#ifndef __ASSEMBLY__ -#include <linux/threads.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/spinlock.h> -#include <linux/sched.h> -struct vm_area_struct; -#endif - -#ifndef __ASSEMBLY__ -#if defined(CONFIG_HIGHPTE) -typedef unsigned long pte_addr_t; -#else -typedef pte_t *pte_addr_t; -#endif -#endif - -/*****************************************************************************/ -/* - * MMU-less operation case first - */ -#ifndef CONFIG_MMU - -#define pgd_present(pgd) (1) /* pages are always present on NO_MM */ -#define pgd_none(pgd) (0) -#define pgd_bad(pgd) (0) -#define pgd_clear(pgdp) -#define kern_addr_valid(addr) (1) -#define pmd_offset(a, b) ((void *) 0) - -#define PAGE_NONE __pgprot(0) /* these mean nothing to NO_MM */ -#define PAGE_SHARED __pgprot(0) /* these mean nothing to NO_MM */ -#define PAGE_COPY __pgprot(0) /* these mean nothing to NO_MM */ -#define PAGE_READONLY __pgprot(0) /* these mean nothing to NO_MM */ -#define PAGE_KERNEL __pgprot(0) /* these mean nothing to NO_MM */ - -#define __swp_type(x) (0) -#define __swp_offset(x) (0) -#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) -#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -#define ZERO_PAGE(vaddr) ({ BUG(); NULL; }) - -#define swapper_pg_dir ((pgd_t *) NULL) - -#define pgtable_cache_init() do {} while (0) - -#include <asm-generic/pgtable.h> - -#else /* !CONFIG_MMU */ -/*****************************************************************************/ -/* - * then MMU operation - */ - -/* - * ZERO_PAGE is a global shared page that is always zero: used - * for zero-mapped memory areas etc.. - */ -#ifndef __ASSEMBLY__ -extern unsigned long empty_zero_page; -#define ZERO_PAGE(vaddr) virt_to_page(empty_zero_page) -#endif - -/* - * we use 2-level page tables, folding the PMD (mid-level table) into the PGE (top-level entry) - * [see Documentation/frv/mmu-layout.txt] - * - * Page Directory: - * - Size: 16KB - * - 64 PGEs per PGD - * - Each PGE holds 1 PUD and covers 64MB - * - * Page Upper Directory: - * - Size: 256B - * - 1 PUE per PUD - * - Each PUE holds 1 PMD and covers 64MB - * - * Page Mid-Level Directory - * - Size: 256B - * - 1 PME per PMD - * - Each PME holds 64 STEs, all of which point to separate chunks of the same Page Table - * - All STEs are instantiated at the same time - * - * Page Table - * - Size: 16KB - * - 4096 PTEs per PT - * - Each Linux PT is subdivided into 64 FR451 PT's, each of which holds 64 entries - * - * Pages - * - Size: 4KB - * - * total PTEs - * = 1 PML4E * 64 PGEs * 1 PUEs * 1 PMEs * 4096 PTEs - * = 1 PML4E * 64 PGEs * 64 STEs * 64 PTEs/FR451-PT - * = 262144 (or 256 * 1024) - */ -#define PGDIR_SHIFT 26 -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE - 1)) -#define PTRS_PER_PGD 64 - -#define __PAGETABLE_PUD_FOLDED -#define PUD_SHIFT 26 -#define PTRS_PER_PUD 1 -#define PUD_SIZE (1UL << PUD_SHIFT) -#define PUD_MASK (~(PUD_SIZE - 1)) -#define PUE_SIZE 256 - -#define __PAGETABLE_PMD_FOLDED -#define PMD_SHIFT 26 -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE - 1)) -#define PTRS_PER_PMD 1 -#define PME_SIZE 256 - -#define __frv_PT_SIZE 256 - -#define PTRS_PER_PTE 4096 - -#define USER_PGDS_IN_LAST_PML4 (TASK_SIZE / PGDIR_SIZE) -#define FIRST_USER_ADDRESS 0UL - -#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT) -#define KERNEL_PGD_PTRS (PTRS_PER_PGD - USER_PGD_PTRS) - -#define TWOLEVEL_PGDIR_SHIFT 26 -#define BOOT_USER_PGD_PTRS (__PAGE_OFFSET >> TWOLEVEL_PGDIR_SHIFT) -#define BOOT_KERNEL_PGD_PTRS (PTRS_PER_PGD - BOOT_USER_PGD_PTRS) - -#ifndef __ASSEMBLY__ - -extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; - -#define pte_ERROR(e) \ - printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, (e).pte) -#define pmd_ERROR(e) \ - printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e)) -#define pud_ERROR(e) \ - printk("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(e))) -#define pgd_ERROR(e) \ - printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pmd_val(pud_val(pgd_val(e)))) - -/* - * Certain architectures need to do special things when PTEs - * within a page table are directly modified. Thus, the following - * hook is made available. - */ -#define set_pte(pteptr, pteval) \ -do { \ - *(pteptr) = (pteval); \ - asm volatile("dcf %M0" :: "U"(*pteptr)); \ -} while(0) -#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) - -/* - * pgd_offset() returns a (pgd_t *) - * pgd_index() is used get the offset into the pgd page's array of pgd_t's; - */ -#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address)) - -/* - * a shortcut which implies the use of the kernel's pgd, instead - * of a process's - */ -#define pgd_offset_k(address) pgd_offset(&init_mm, address) - -/* - * The "pgd_xxx()" functions here are trivial for a folded two-level - * setup: the pud is never bad, and a pud always exists (as it's folded - * into the pgd entry) - */ -static inline int pgd_none(pgd_t pgd) { return 0; } -static inline int pgd_bad(pgd_t pgd) { return 0; } -static inline int pgd_present(pgd_t pgd) { return 1; } -static inline void pgd_clear(pgd_t *pgd) { } - -#define pgd_populate(mm, pgd, pud) do { } while (0) -/* - * (puds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pgd(pgdptr, pgdval) \ -do { \ - memcpy((pgdptr), &(pgdval), sizeof(pgd_t)); \ - asm volatile("dcf %M0" :: "U"(*(pgdptr))); \ -} while(0) - -static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address) -{ - return (pud_t *) pgd; -} - -#define pgd_page(pgd) (pud_page((pud_t){ pgd })) -#define pgd_page_vaddr(pgd) (pud_page_vaddr((pud_t){ pgd })) - -/* - * allocating and freeing a pud is trivial: the 1-entry pud is - * inside the pgd, so has no extra memory associated with it. - */ -#define pud_alloc_one(mm, address) NULL -#define pud_free(mm, x) do { } while (0) -#define __pud_free_tlb(tlb, x, address) do { } while (0) - -/* - * The "pud_xxx()" functions here are trivial for a folded two-level - * setup: the pmd is never bad, and a pmd always exists (as it's folded - * into the pud entry) - */ -static inline int pud_none(pud_t pud) { return 0; } -static inline int pud_bad(pud_t pud) { return 0; } -static inline int pud_present(pud_t pud) { return 1; } -static inline void pud_clear(pud_t *pud) { } - -#define pud_populate(mm, pmd, pte) do { } while (0) - -/* - * (pmds are folded into puds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -#define set_pud(pudptr, pudval) set_pmd((pmd_t *)(pudptr), (pmd_t) { pudval }) - -#define pud_page(pud) (pmd_page((pmd_t){ pud })) -#define pud_page_vaddr(pud) (pmd_page_vaddr((pmd_t){ pud })) - -/* - * (pmds are folded into pgds so this doesn't get actually called, - * but the define is needed for a generic inline function.) - */ -extern void __set_pmd(pmd_t *pmdptr, unsigned long __pmd); - -#define set_pmd(pmdptr, pmdval) \ -do { \ - __set_pmd((pmdptr), (pmdval).ste[0]); \ -} while(0) - -#define __pmd_index(address) 0 - -static inline pmd_t *pmd_offset(pud_t *dir, unsigned long address) -{ - return (pmd_t *) dir + __pmd_index(address); -} - -#define pte_same(a, b) ((a).pte == (b).pte) -#define pte_page(x) (mem_map + ((unsigned long)(((x).pte >> PAGE_SHIFT)))) -#define pte_none(x) (!(x).pte) -#define pte_pfn(x) ((unsigned long)(((x).pte >> PAGE_SHIFT))) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) -#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) - -#define VMALLOC_VMADDR(x) ((unsigned long) (x)) - -#endif /* !__ASSEMBLY__ */ - -/* - * control flags in AMPR registers and TLB entries - */ -#define _PAGE_BIT_PRESENT xAMPRx_V_BIT -#define _PAGE_BIT_WP DAMPRx_WP_BIT -#define _PAGE_BIT_NOCACHE xAMPRx_C_BIT -#define _PAGE_BIT_SUPER xAMPRx_S_BIT -#define _PAGE_BIT_ACCESSED xAMPRx_RESERVED8_BIT -#define _PAGE_BIT_DIRTY xAMPRx_M_BIT -#define _PAGE_BIT_NOTGLOBAL xAMPRx_NG_BIT - -#define _PAGE_PRESENT xAMPRx_V -#define _PAGE_WP DAMPRx_WP -#define _PAGE_NOCACHE xAMPRx_C -#define _PAGE_SUPER xAMPRx_S -#define _PAGE_ACCESSED xAMPRx_RESERVED8 /* accessed if set */ -#define _PAGE_DIRTY xAMPRx_M -#define _PAGE_NOTGLOBAL xAMPRx_NG - -#define _PAGE_RESERVED_MASK (xAMPRx_RESERVED8 | xAMPRx_RESERVED13) - -#define _PAGE_PROTNONE 0x000 /* If not present */ - -#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) - -#define __PGPROT_BASE \ - (_PAGE_PRESENT | xAMPRx_SS_16Kb | xAMPRx_D | _PAGE_NOTGLOBAL | _PAGE_ACCESSED) - -#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED) -#define PAGE_SHARED __pgprot(__PGPROT_BASE) -#define PAGE_COPY __pgprot(__PGPROT_BASE | _PAGE_WP) -#define PAGE_READONLY __pgprot(__PGPROT_BASE | _PAGE_WP) - -#define __PAGE_KERNEL (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY) -#define __PAGE_KERNEL_NOCACHE (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_NOCACHE) -#define __PAGE_KERNEL_RO (__PGPROT_BASE | _PAGE_SUPER | _PAGE_DIRTY | _PAGE_WP) - -#define MAKE_GLOBAL(x) __pgprot((x) & ~_PAGE_NOTGLOBAL) - -#define PAGE_KERNEL MAKE_GLOBAL(__PAGE_KERNEL) -#define PAGE_KERNEL_RO MAKE_GLOBAL(__PAGE_KERNEL_RO) -#define PAGE_KERNEL_NOCACHE MAKE_GLOBAL(__PAGE_KERNEL_NOCACHE) - -#define _PAGE_TABLE (_PAGE_PRESENT | xAMPRx_SS_16Kb) - -#ifndef __ASSEMBLY__ - -/* - * The FR451 can do execute protection by virtue of having separate TLB miss handlers for - * instruction access and for data access. However, we don't have enough reserved bits to say - * "execute only", so we don't bother. If you can read it, you can execute it and vice versa. - */ -#define __P000 PAGE_NONE -#define __P001 PAGE_READONLY -#define __P010 PAGE_COPY -#define __P011 PAGE_COPY -#define __P100 PAGE_READONLY -#define __P101 PAGE_READONLY -#define __P110 PAGE_COPY -#define __P111 PAGE_COPY - -#define __S000 PAGE_NONE -#define __S001 PAGE_READONLY -#define __S010 PAGE_SHARED -#define __S011 PAGE_SHARED -#define __S100 PAGE_READONLY -#define __S101 PAGE_READONLY -#define __S110 PAGE_SHARED -#define __S111 PAGE_SHARED - -/* - * Define this to warn about kernel memory accesses that are - * done without a 'access_ok(VERIFY_WRITE,..)' - */ -#undef TEST_ACCESS_OK - -#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) -#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) - -#define pmd_none(x) (!pmd_val(x)) -#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT) -#define pmd_bad(x) (pmd_val(x) & xAMPRx_SS) -#define pmd_clear(xp) do { __set_pmd(xp, 0); } while(0) - -#define pmd_page_vaddr(pmd) \ - ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK)) - -#ifndef CONFIG_DISCONTIGMEM -#define pmd_page(pmd) (pfn_to_page(pmd_val(pmd) >> PAGE_SHIFT)) -#endif - -#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) - -/* - * The following only work if pte_present() is true. - * Undefined behaviour if not.. - */ -static inline int pte_dirty(pte_t pte) { return (pte).pte & _PAGE_DIRTY; } -static inline int pte_young(pte_t pte) { return (pte).pte & _PAGE_ACCESSED; } -static inline int pte_write(pte_t pte) { return !((pte).pte & _PAGE_WP); } -static inline int pte_special(pte_t pte) { return 0; } - -static inline pte_t pte_mkclean(pte_t pte) { (pte).pte &= ~_PAGE_DIRTY; return pte; } -static inline pte_t pte_mkold(pte_t pte) { (pte).pte &= ~_PAGE_ACCESSED; return pte; } -static inline pte_t pte_wrprotect(pte_t pte) { (pte).pte |= _PAGE_WP; return pte; } -static inline pte_t pte_mkdirty(pte_t pte) { (pte).pte |= _PAGE_DIRTY; return pte; } -static inline pte_t pte_mkyoung(pte_t pte) { (pte).pte |= _PAGE_ACCESSED; return pte; } -static inline pte_t pte_mkwrite(pte_t pte) { (pte).pte &= ~_PAGE_WP; return pte; } -static inline pte_t pte_mkspecial(pte_t pte) { return pte; } - -static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep) -{ - int i = test_and_clear_bit(_PAGE_BIT_ACCESSED, ptep); - asm volatile("dcf %M0" :: "U"(*ptep)); - return i; -} - -static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - unsigned long x = xchg(&ptep->pte, 0); - asm volatile("dcf %M0" :: "U"(*ptep)); - return __pte(x); -} - -static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) -{ - set_bit(_PAGE_BIT_WP, ptep); - asm volatile("dcf %M0" :: "U"(*ptep)); -} - -/* - * Macro to mark a page protection value as "uncacheable" - */ -#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE)) - -/* - * Conversion functions: convert a page and protection to a page entry, - * and a page entry and page directory to the page they refer to. - */ - -#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) -#define mk_pte_huge(entry) ((entry).pte_low |= _PAGE_PRESENT | _PAGE_PSE) - -/* This takes a physical page address that is used by the remapping functions */ -#define mk_pte_phys(physpage, pgprot) pfn_pte((physpage) >> PAGE_SHIFT, pgprot) - -static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) -{ - pte.pte &= _PAGE_CHG_MASK; - pte.pte |= pgprot_val(newprot); - return pte; -} - -/* to find an entry in a page-table-directory. */ -#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1)) -#define pgd_index_k(addr) pgd_index(addr) - -/* Find an entry in the bottom-level page table.. */ -#define __pte_index(address) (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) - -/* - * the pte page can be thought of an array like this: pte_t[PTRS_PER_PTE] - * - * this macro returns the index of the entry in the pte page which would - * control the given virtual address - */ -#define pte_index(address) \ - (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) -#define pte_offset_kernel(dir, address) \ - ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) - -#if defined(CONFIG_HIGHPTE) -#define pte_offset_map(dir, address) \ - ((pte_t *)kmap_atomic(pmd_page(*(dir))) + pte_index(address)) -#define pte_unmap(pte) kunmap_atomic(pte) -#else -#define pte_offset_map(dir, address) \ - ((pte_t *)page_address(pmd_page(*(dir))) + pte_index(address)) -#define pte_unmap(pte) do { } while (0) -#endif - -/* - * Handle swap and file entries - * - the PTE is encoded in the following format: - * bit 0: Must be 0 (!_PAGE_PRESENT) - * bits 1-6: Swap type - * bits 7-31: Swap offset - */ -#define __swp_type(x) (((x).val >> 1) & 0x1f) -#define __swp_offset(x) ((x).val >> 7) -#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 1) | ((offset) << 7) }) -#define __pte_to_swp_entry(_pte) ((swp_entry_t) { (_pte).pte }) -#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) - -/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ -#define PageSkip(page) (0) -#define kern_addr_valid(addr) (1) - -#define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG -#define __HAVE_ARCH_PTEP_GET_AND_CLEAR -#define __HAVE_ARCH_PTEP_SET_WRPROTECT -#define __HAVE_ARCH_PTE_SAME -#include <asm-generic/pgtable.h> - -/* - * preload information about a newly instantiated PTE into the SCR0/SCR1 PGE cache - */ -static inline void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, pte_t *ptep) -{ - struct mm_struct *mm; - unsigned long ampr; - - mm = current->mm; - if (mm) { - pgd_t *pge = pgd_offset(mm, address); - pud_t *pue = pud_offset(pge, address); - pmd_t *pme = pmd_offset(pue, address); - - ampr = pme->ste[0] & 0xffffff00; - ampr |= xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | - xAMPRx_V; - } else { - address = ULONG_MAX; - ampr = 0; - } - - asm volatile("movgs %0,scr0\n" - "movgs %0,scr1\n" - "movgs %1,dampr4\n" - "movgs %1,dampr5\n" - : - : "r"(address), "r"(ampr) - ); -} - -#ifdef CONFIG_PROC_FS -extern char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer); -#endif - -extern void __init pgtable_cache_init(void); - -#endif /* !__ASSEMBLY__ */ -#endif /* !CONFIG_MMU */ - -#ifndef __ASSEMBLY__ -extern void __init paging_init(void); -#endif /* !__ASSEMBLY__ */ -#define HAVE_ARCH_UNMAPPED_AREA - -#endif /* _ASM_PGTABLE_H */ diff --git a/arch/frv/include/asm/processor.h b/arch/frv/include/asm/processor.h deleted file mode 100644 index 021cce78b401..000000000000 --- a/arch/frv/include/asm/processor.h +++ /dev/null @@ -1,110 +0,0 @@ -/* processor.h: FRV processor definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_PROCESSOR_H -#define _ASM_PROCESSOR_H - -#include <asm/mem-layout.h> - -#ifndef __ASSEMBLY__ -/* - * Default implementation of macro that returns current - * instruction pointer ("program counter"). - */ -#define current_text_addr() ({ __label__ _l; _l: &&_l;}) - -#include <linux/compiler.h> -#include <linux/linkage.h> -#include <asm/sections.h> -#include <asm/segment.h> -#include <asm/fpu.h> -#include <asm/registers.h> -#include <asm/ptrace.h> -#include <asm/current.h> -#include <asm/cache.h> - -/* Forward declaration, a strange C thing */ -struct task_struct; - -/* - * Bus types - */ -#define EISA_bus 0 - -struct thread_struct { - struct pt_regs *frame; /* [GR28] exception frame ptr for this thread */ - struct task_struct *curr; /* [GR29] current pointer for this thread */ - unsigned long sp; /* [GR1 ] kernel stack pointer */ - unsigned long fp; /* [GR2 ] kernel frame pointer */ - unsigned long lr; /* link register */ - unsigned long pc; /* program counter */ - unsigned long gr[12]; /* [GR16-GR27] */ - unsigned long sched_lr; /* LR from schedule() */ - - union { - struct pt_regs *frame0; /* top (user) stack frame */ - struct user_context *user; /* userspace context */ - }; -} __attribute__((aligned(8))); - -extern struct pt_regs *__kernel_frame0_ptr; -extern struct task_struct *__kernel_current_task; - -#endif - -#ifndef __ASSEMBLY__ -#define INIT_THREAD_FRAME0 \ - ((struct pt_regs *) \ - (sizeof(init_stack) + (unsigned long) init_stack - sizeof(struct user_context))) - -#define INIT_THREAD { \ - NULL, \ - (struct task_struct *) init_stack, \ - 0, 0, 0, 0, \ - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, \ - 0, \ - { INIT_THREAD_FRAME0 }, \ -} - -/* - * do necessary setup to start up a newly executed thread. - */ -#define start_thread(_regs, _pc, _usp) \ -do { \ - _regs->pc = (_pc); \ - _regs->psr &= ~PSR_S; \ - _regs->sp = (_usp); \ -} while(0) - -/* Free all resources held by a thread. */ -static inline void release_thread(struct task_struct *dead_task) -{ -} - -extern asmlinkage void save_user_regs(struct user_context *target); -extern asmlinkage void *restore_user_regs(const struct user_context *target, ...); - -unsigned long get_wchan(struct task_struct *p); - -#define KSTK_EIP(tsk) ((tsk)->thread.frame0->pc) -#define KSTK_ESP(tsk) ((tsk)->thread.frame0->sp) - -#define cpu_relax() barrier() - -/* data cache prefetch */ -#define ARCH_HAS_PREFETCH -static inline void prefetch(const void *x) -{ - asm volatile("dcpl %0,gr0,#0" : : "r"(x)); -} - -#endif /* __ASSEMBLY__ */ -#endif /* _ASM_PROCESSOR_H */ diff --git a/arch/frv/include/asm/ptrace.h b/arch/frv/include/asm/ptrace.h deleted file mode 100644 index 034f17934192..000000000000 --- a/arch/frv/include/asm/ptrace.h +++ /dev/null @@ -1,41 +0,0 @@ -/* ptrace.h: ptrace() relevant definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_PTRACE_H -#define _ASM_PTRACE_H - -#include <asm/irq_regs.h> -#include <uapi/asm/ptrace.h> - -#define in_syscall(regs) (((regs)->tbr & TBR_TT) == TBR_TT_TRAP0) -#ifndef __ASSEMBLY__ - -struct task_struct; - -/* - * we dedicate GR28 to keeping a pointer to the current exception frame - * - gr28 is destroyed on entry to the kernel from userspace - */ -register struct pt_regs *__frame asm("gr28"); - -#define user_mode(regs) (!((regs)->psr & PSR_S)) -#define instruction_pointer(regs) ((regs)->pc) -#define user_stack_pointer(regs) ((regs)->sp) -#define current_pt_regs() (__frame) - -extern unsigned long user_stack(const struct pt_regs *); -#define profile_pc(regs) ((regs)->pc) - -#define task_pt_regs(task) ((task)->thread.frame0) - -#define arch_has_single_step() (1) - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_PTRACE_H */ diff --git a/arch/frv/include/asm/sections.h b/arch/frv/include/asm/sections.h deleted file mode 100644 index d03fb64e93e9..000000000000 --- a/arch/frv/include/asm/sections.h +++ /dev/null @@ -1,40 +0,0 @@ -/* sections.h: linkage layout variables - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SECTIONS_H -#define _ASM_SECTIONS_H - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> -#include <asm-generic/sections.h> - -#ifdef __KERNEL__ - -/* - * we don't want to put variables in the GP-REL section if they're not used very much - that would - * be waste since GP-REL addressing is limited to GP16+/-2048 - */ -#define __nongpreldata __attribute__((section(".data"))) -#define __nongprelbss __attribute__((section(".bss"))) - -/* - * linker symbols - */ -extern const void __kernel_image_start, __kernel_image_end, __page_offset; - -extern unsigned long __nongprelbss memory_start; -extern unsigned long __nongprelbss memory_end; -extern unsigned long __nongprelbss rom_length; - -#endif -#endif -#endif /* _ASM_SECTIONS_H */ diff --git a/arch/frv/include/asm/segment.h b/arch/frv/include/asm/segment.h deleted file mode 100644 index 2305142d4cf8..000000000000 --- a/arch/frv/include/asm/segment.h +++ /dev/null @@ -1,44 +0,0 @@ -/* segment.h: MMU segment settings - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SEGMENT_H -#define _ASM_SEGMENT_H - - -#ifndef __ASSEMBLY__ - -typedef struct { - unsigned long seg; -} mm_segment_t; - -#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) - -#ifdef CONFIG_MMU -#define USER_DS MAKE_MM_SEG(TASK_SIZE - 1) -#define KERNEL_DS MAKE_MM_SEG(0xdfffffffUL) -#else -#define USER_DS MAKE_MM_SEG(memory_end) -#define KERNEL_DS MAKE_MM_SEG(0xe0000000UL) -#endif - -#define get_ds() (KERNEL_DS) -#define get_fs() (__current_thread_info->addr_limit) -#define segment_eq(a, b) ((a).seg == (b).seg) -#define get_addr_limit() (get_fs().seg) - -#define set_fs(_x) \ -do { \ - __current_thread_info->addr_limit = (_x); \ -} while(0) - - -#endif /* __ASSEMBLY__ */ -#endif /* _ASM_SEGMENT_H */ diff --git a/arch/frv/include/asm/serial-regs.h b/arch/frv/include/asm/serial-regs.h deleted file mode 100644 index e1286bda00eb..000000000000 --- a/arch/frv/include/asm/serial-regs.h +++ /dev/null @@ -1,44 +0,0 @@ -/* serial-regs.h: serial port registers - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SERIAL_REGS_H -#define _ASM_SERIAL_REGS_H - -#include <linux/serial_reg.h> -#include <asm/irc-regs.h> - -#define SERIAL_ICLK 33333333 /* the target serial input clock */ -#define UART0_BASE 0xfeff9c00 -#define UART1_BASE 0xfeff9c40 - -#define __get_UART0(R) ({ __reg(UART0_BASE + (R) * 8) >> 24; }) -#define __get_UART1(R) ({ __reg(UART1_BASE + (R) * 8) >> 24; }) -#define __set_UART0(R,V) do { __reg(UART0_BASE + (R) * 8) = (V) << 24; } while(0) -#define __set_UART1(R,V) do { __reg(UART1_BASE + (R) * 8) = (V) << 24; } while(0) - -#define __get_UART0_LSR() ({ __get_UART0(UART_LSR); }) -#define __get_UART1_LSR() ({ __get_UART1(UART_LSR); }) - -#define __set_UART0_IER(V) __set_UART0(UART_IER,(V)) -#define __set_UART1_IER(V) __set_UART1(UART_IER,(V)) - -/* serial prescaler select register */ -#define __get_UCPSR() ({ *(volatile unsigned long *)(0xfeff9c90); }) -#define __set_UCPSR(V) do { *(volatile unsigned long *)(0xfeff9c90) = (V); } while(0) -#define UCPSR_SELECT0 0x07000000 -#define UCPSR_SELECT1 0x38000000 - -/* serial prescaler base value register */ -#define __get_UCPVR() ({ *(volatile unsigned long *)(0xfeff9c98); mb(); }) -#define __set_UCPVR(V) do { *(volatile unsigned long *)(0xfeff9c98) = (V) << 24; mb(); } while(0) - - -#endif /* _ASM_SERIAL_REGS_H */ diff --git a/arch/frv/include/asm/serial.h b/arch/frv/include/asm/serial.h deleted file mode 100644 index 614c6d76789a..000000000000 --- a/arch/frv/include/asm/serial.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * serial.h - * - * Copyright (C) 2003 Develer S.r.l. (http://www.develer.com/) - * Author: Bernardo Innocenti <bernie@codewiz.org> - * - * Based on linux/include/asm-i386/serial.h - */ -#include <asm/serial-regs.h> - -/* - * the base baud is derived from the clock speed and so is variable - */ -#define BASE_BAUD 0 diff --git a/arch/frv/include/asm/setup.h b/arch/frv/include/asm/setup.h deleted file mode 100644 index aa76f2eac09a..000000000000 --- a/arch/frv/include/asm/setup.h +++ /dev/null @@ -1,26 +0,0 @@ -/* setup.h: setup stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_SETUP_H -#define _ASM_SETUP_H - - -#include <linux/init.h> -#include <uapi/asm/setup.h> - -#ifndef __ASSEMBLY__ - -#ifdef CONFIG_MMU -extern unsigned long __initdata num_mappedpages; -#endif - -#endif /* !__ASSEMBLY__ */ - -#endif /* _ASM_SETUP_H */ diff --git a/arch/frv/include/asm/shmparam.h b/arch/frv/include/asm/shmparam.h deleted file mode 100644 index 50ea51f26c46..000000000000 --- a/arch/frv/include/asm/shmparam.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_SHMPARAM_H -#define _ASM_SHMPARAM_H - -#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ - -#endif /* _ASM_SHMPARAM_H */ - diff --git a/arch/frv/include/asm/signal.h b/arch/frv/include/asm/signal.h deleted file mode 100644 index 796394113904..000000000000 --- a/arch/frv/include/asm/signal.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_SIGNAL_H -#define _ASM_SIGNAL_H - -#include <uapi/asm/signal.h> - -#endif /* _ASM_SIGNAL_H */ diff --git a/arch/frv/include/asm/smp.h b/arch/frv/include/asm/smp.h deleted file mode 100644 index 0d7fa409312d..000000000000 --- a/arch/frv/include/asm/smp.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_SMP_H -#define __ASM_SMP_H - - -#ifdef CONFIG_SMP -#error SMP not supported -#endif - -#endif diff --git a/arch/frv/include/asm/spinlock.h b/arch/frv/include/asm/spinlock.h deleted file mode 100644 index fe385f45d1fd..000000000000 --- a/arch/frv/include/asm/spinlock.h +++ /dev/null @@ -1,17 +0,0 @@ -/* spinlock.h: spinlocks for FR-V - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SPINLOCK_H -#define _ASM_SPINLOCK_H - -#error no spinlocks for FR-V yet - -#endif /* _ASM_SPINLOCK_H */ diff --git a/arch/frv/include/asm/spr-regs.h b/arch/frv/include/asm/spr-regs.h deleted file mode 100644 index d3883021f236..000000000000 --- a/arch/frv/include/asm/spr-regs.h +++ /dev/null @@ -1,416 +0,0 @@ -/* spr-regs.h: special-purpose registers on the FRV - * - * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SPR_REGS_H -#define _ASM_SPR_REGS_H - -/* - * PSR - Processor Status Register - */ -#define PSR_ET 0x00000001 /* enable interrupts/exceptions flag */ -#define PSR_PS 0x00000002 /* previous supervisor mode flag */ -#define PSR_S 0x00000004 /* supervisor mode flag */ -#define PSR_PIL 0x00000078 /* processor external interrupt level */ -#define PSR_PIL_0 0x00000000 /* - no interrupt in progress */ -#define PSR_PIL_13 0x00000068 /* - debugging only */ -#define PSR_PIL_14 0x00000070 /* - debugging in progress */ -#define PSR_PIL_15 0x00000078 /* - NMI in progress */ -#define PSR_EM 0x00000080 /* enable media operation */ -#define PSR_EF 0x00000100 /* enable FPU operation */ -#define PSR_BE 0x00001000 /* endianness mode */ -#define PSR_BE_LE 0x00000000 /* - little endian mode */ -#define PSR_BE_BE 0x00001000 /* - big endian mode */ -#define PSR_CM 0x00002000 /* conditional mode */ -#define PSR_NEM 0x00004000 /* non-excepting mode */ -#define PSR_ICE 0x00010000 /* in-circuit emulation mode */ -#define PSR_VERSION_SHIFT 24 /* CPU silicon ID */ -#define PSR_IMPLE_SHIFT 28 /* CPU core ID */ - -#define PSR_VERSION(psr) (((psr) >> PSR_VERSION_SHIFT) & 0xf) -#define PSR_IMPLE(psr) (((psr) >> PSR_IMPLE_SHIFT) & 0xf) - -#define PSR_IMPLE_FR401 0x2 -#define PSR_VERSION_FR401_MB93401 0x0 -#define PSR_VERSION_FR401_MB93401A 0x1 -#define PSR_VERSION_FR401_MB93403 0x2 - -#define PSR_IMPLE_FR405 0x4 -#define PSR_VERSION_FR405_MB93405 0x0 - -#define PSR_IMPLE_FR451 0x5 -#define PSR_VERSION_FR451_MB93451 0x0 - -#define PSR_IMPLE_FR501 0x1 -#define PSR_VERSION_FR501_MB93501 0x1 -#define PSR_VERSION_FR501_MB93501A 0x2 - -#define PSR_IMPLE_FR551 0x3 -#define PSR_VERSION_FR551_MB93555 0x1 - -#define __get_PSR() ({ unsigned long x; asm volatile("movsg psr,%0" : "=r"(x)); x; }) -#define __set_PSR(V) do { asm volatile("movgs %0,psr" : : "r"(V)); } while(0) - -/* - * TBR - Trap Base Register - */ -#define TBR_TT 0x00000ff0 -#define TBR_TT_INSTR_MMU_MISS (0x01 << 4) -#define TBR_TT_INSTR_ACC_ERROR (0x02 << 4) -#define TBR_TT_INSTR_ACC_EXCEP (0x03 << 4) -#define TBR_TT_PRIV_INSTR (0x06 << 4) -#define TBR_TT_ILLEGAL_INSTR (0x07 << 4) -#define TBR_TT_FP_EXCEPTION (0x0d << 4) -#define TBR_TT_MP_EXCEPTION (0x0e << 4) -#define TBR_TT_DATA_ACC_ERROR (0x11 << 4) -#define TBR_TT_DATA_MMU_MISS (0x12 << 4) -#define TBR_TT_DATA_ACC_EXCEP (0x13 << 4) -#define TBR_TT_DATA_STR_ERROR (0x14 << 4) -#define TBR_TT_DIVISION_EXCEP (0x17 << 4) -#define TBR_TT_COMMIT_EXCEP (0x19 << 4) -#define TBR_TT_INSTR_TLB_MISS (0x1a << 4) -#define TBR_TT_DATA_TLB_MISS (0x1b << 4) -#define TBR_TT_DATA_DAT_EXCEP (0x1d << 4) -#define TBR_TT_DECREMENT_TIMER (0x1f << 4) -#define TBR_TT_COMPOUND_EXCEP (0x20 << 4) -#define TBR_TT_INTERRUPT_1 (0x21 << 4) -#define TBR_TT_INTERRUPT_2 (0x22 << 4) -#define TBR_TT_INTERRUPT_3 (0x23 << 4) -#define TBR_TT_INTERRUPT_4 (0x24 << 4) -#define TBR_TT_INTERRUPT_5 (0x25 << 4) -#define TBR_TT_INTERRUPT_6 (0x26 << 4) -#define TBR_TT_INTERRUPT_7 (0x27 << 4) -#define TBR_TT_INTERRUPT_8 (0x28 << 4) -#define TBR_TT_INTERRUPT_9 (0x29 << 4) -#define TBR_TT_INTERRUPT_10 (0x2a << 4) -#define TBR_TT_INTERRUPT_11 (0x2b << 4) -#define TBR_TT_INTERRUPT_12 (0x2c << 4) -#define TBR_TT_INTERRUPT_13 (0x2d << 4) -#define TBR_TT_INTERRUPT_14 (0x2e << 4) -#define TBR_TT_INTERRUPT_15 (0x2f << 4) -#define TBR_TT_TRAP0 (0x80 << 4) -#define TBR_TT_TRAP1 (0x81 << 4) -#define TBR_TT_TRAP2 (0x82 << 4) -#define TBR_TT_TRAP3 (0x83 << 4) -#define TBR_TT_TRAP120 (0xf8 << 4) -#define TBR_TT_TRAP121 (0xf9 << 4) -#define TBR_TT_TRAP122 (0xfa << 4) -#define TBR_TT_TRAP123 (0xfb << 4) -#define TBR_TT_TRAP124 (0xfc << 4) -#define TBR_TT_TRAP125 (0xfd << 4) -#define TBR_TT_TRAP126 (0xfe << 4) -#define TBR_TT_BREAK (0xff << 4) - -#define TBR_TT_ATOMIC_CMPXCHG32 TBR_TT_TRAP120 -#define TBR_TT_ATOMIC_XCHG32 TBR_TT_TRAP121 -#define TBR_TT_ATOMIC_XOR TBR_TT_TRAP122 -#define TBR_TT_ATOMIC_OR TBR_TT_TRAP123 -#define TBR_TT_ATOMIC_AND TBR_TT_TRAP124 -#define TBR_TT_ATOMIC_SUB TBR_TT_TRAP125 -#define TBR_TT_ATOMIC_ADD TBR_TT_TRAP126 - -#define __get_TBR() ({ unsigned long x; asm volatile("movsg tbr,%0" : "=r"(x)); x; }) - -/* - * HSR0 - Hardware Status Register 0 - */ -#define HSR0_PDM 0x00000007 /* power down mode */ -#define HSR0_PDM_NORMAL 0x00000000 /* - normal mode */ -#define HSR0_PDM_CORE_SLEEP 0x00000001 /* - CPU core sleep mode */ -#define HSR0_PDM_BUS_SLEEP 0x00000003 /* - bus sleep mode */ -#define HSR0_PDM_PLL_RUN 0x00000005 /* - PLL run */ -#define HSR0_PDM_PLL_STOP 0x00000007 /* - PLL stop */ -#define HSR0_GRLE 0x00000040 /* GR lower register set enable */ -#define HSR0_GRHE 0x00000080 /* GR higher register set enable */ -#define HSR0_FRLE 0x00000100 /* FR lower register set enable */ -#define HSR0_FRHE 0x00000200 /* FR higher register set enable */ -#define HSR0_GRN 0x00000400 /* GR quantity */ -#define HSR0_GRN_64 0x00000000 /* - 64 GR registers */ -#define HSR0_GRN_32 0x00000400 /* - 32 GR registers */ -#define HSR0_FRN 0x00000800 /* FR quantity */ -#define HSR0_FRN_64 0x00000000 /* - 64 FR registers */ -#define HSR0_FRN_32 0x00000800 /* - 32 FR registers */ -#define HSR0_SA 0x00001000 /* start address (RAMBOOT#) */ -#define HSR0_ETMI 0x00008000 /* enable TIMERI (64-bit up timer) */ -#define HSR0_ETMD 0x00004000 /* enable TIMERD (32-bit down timer) */ -#define HSR0_PEDAT 0x00010000 /* previous DAT mode */ -#define HSR0_XEDAT 0x00020000 /* exception DAT mode */ -#define HSR0_EDAT 0x00080000 /* enable DAT mode */ -#define HSR0_RME 0x00400000 /* enable RAM mode */ -#define HSR0_EMEM 0x00800000 /* enable MMU_Miss mask */ -#define HSR0_EXMMU 0x01000000 /* enable extended MMU mode */ -#define HSR0_EDMMU 0x02000000 /* enable data MMU */ -#define HSR0_EIMMU 0x04000000 /* enable instruction MMU */ -#define HSR0_CBM 0x08000000 /* copy back mode */ -#define HSR0_CBM_WRITE_THRU 0x00000000 /* - write through */ -#define HSR0_CBM_COPY_BACK 0x08000000 /* - copy back */ -#define HSR0_NWA 0x10000000 /* no write allocate */ -#define HSR0_DCE 0x40000000 /* data cache enable */ -#define HSR0_ICE 0x80000000 /* instruction cache enable */ - -#define __get_HSR(R) ({ unsigned long x; asm volatile("movsg hsr"#R",%0" : "=r"(x)); x; }) -#define __set_HSR(R,V) do { asm volatile("movgs %0,hsr"#R : : "r"(V)); } while(0) - -/* - * CCR - Condition Codes Register - */ -#define CCR_FCC0 0x0000000f /* FP/Media condition 0 (fcc0 reg) */ -#define CCR_FCC1 0x000000f0 /* FP/Media condition 1 (fcc1 reg) */ -#define CCR_FCC2 0x00000f00 /* FP/Media condition 2 (fcc2 reg) */ -#define CCR_FCC3 0x0000f000 /* FP/Media condition 3 (fcc3 reg) */ -#define CCR_ICC0 0x000f0000 /* Integer condition 0 (icc0 reg) */ -#define CCR_ICC0_C 0x00010000 /* - Carry flag */ -#define CCR_ICC0_V 0x00020000 /* - Overflow flag */ -#define CCR_ICC0_Z 0x00040000 /* - Zero flag */ -#define CCR_ICC0_N 0x00080000 /* - Negative flag */ -#define CCR_ICC1 0x00f00000 /* Integer condition 1 (icc1 reg) */ -#define CCR_ICC2 0x0f000000 /* Integer condition 2 (icc2 reg) */ -#define CCR_ICC3 0xf0000000 /* Integer condition 3 (icc3 reg) */ - -/* - * CCCR - Condition Codes for Conditional Instructions Register - */ -#define CCCR_CC0 0x00000003 /* condition 0 (cc0 reg) */ -#define CCCR_CC0_FALSE 0x00000002 /* - condition is false */ -#define CCCR_CC0_TRUE 0x00000003 /* - condition is true */ -#define CCCR_CC1 0x0000000c /* condition 1 (cc1 reg) */ -#define CCCR_CC2 0x00000030 /* condition 2 (cc2 reg) */ -#define CCCR_CC3 0x000000c0 /* condition 3 (cc3 reg) */ -#define CCCR_CC4 0x00000300 /* condition 4 (cc4 reg) */ -#define CCCR_CC5 0x00000c00 /* condition 5 (cc5 reg) */ -#define CCCR_CC6 0x00003000 /* condition 6 (cc6 reg) */ -#define CCCR_CC7 0x0000c000 /* condition 7 (cc7 reg) */ - -/* - * ISR - Integer Status Register - */ -#define ISR_EMAM 0x00000001 /* memory misaligned access handling */ -#define ISR_EMAM_EXCEPTION 0x00000000 /* - generate exception */ -#define ISR_EMAM_FUDGE 0x00000001 /* - mask out invalid address bits */ -#define ISR_AEXC 0x00000004 /* accrued [overflow] exception */ -#define ISR_DTT 0x00000018 /* division type trap */ -#define ISR_DTT_IGNORE 0x00000000 /* - ignore division error */ -#define ISR_DTT_DIVBYZERO 0x00000008 /* - generate exception */ -#define ISR_DTT_OVERFLOW 0x00000010 /* - record overflow */ -#define ISR_EDE 0x00000020 /* enable division exception */ -#define ISR_PLI 0x20000000 /* pre-load instruction information */ -#define ISR_QI 0x80000000 /* quad data implementation information */ - -/* - * EPCR0 - Exception PC Register - */ -#define EPCR0_V 0x00000001 /* register content validity indicator */ -#define EPCR0_PC 0xfffffffc /* faulting instruction address */ - -/* - * ESR0/14/15 - Exception Status Register - */ -#define ESRx_VALID 0x00000001 /* register content validity indicator */ -#define ESRx_EC 0x0000003e /* exception type */ -#define ESRx_EC_DATA_STORE 0x00000000 /* - data_store_error */ -#define ESRx_EC_INSN_ACCESS 0x00000006 /* - instruction_access_error */ -#define ESRx_EC_PRIV_INSN 0x00000008 /* - privileged_instruction */ -#define ESRx_EC_ILL_INSN 0x0000000a /* - illegal_instruction */ -#define ESRx_EC_MP_EXCEP 0x0000001c /* - mp_exception */ -#define ESRx_EC_DATA_ACCESS 0x00000020 /* - data_access_error */ -#define ESRx_EC_DIVISION 0x00000026 /* - division_exception */ -#define ESRx_EC_ITLB_MISS 0x00000034 /* - instruction_access_TLB_miss */ -#define ESRx_EC_DTLB_MISS 0x00000036 /* - data_access_TLB_miss */ -#define ESRx_EC_DATA_ACCESS_DAT 0x0000003a /* - data_access_DAT_exception */ - -#define ESR0_IAEC 0x00000100 /* info for instruction-access-exception */ -#define ESR0_IAEC_RESV 0x00000000 /* - reserved */ -#define ESR0_IAEC_PROT_VIOL 0x00000100 /* - protection violation */ - -#define ESR0_ATXC 0x00f00000 /* address translation exception code */ -#define ESR0_ATXC_MMU_MISS 0x00000000 /* - MMU miss exception and more (?) */ -#define ESR0_ATXC_MULTI_DAT 0x00800000 /* - multiple DAT entry hit */ -#define ESR0_ATXC_MULTI_SAT 0x00900000 /* - multiple SAT entry hit */ -#define ESR0_ATXC_AMRTLB_MISS 0x00a00000 /* - MMU/TLB miss exception */ -#define ESR0_ATXC_PRIV_EXCEP 0x00c00000 /* - privilege protection fault */ -#define ESR0_ATXC_WP_EXCEP 0x00d00000 /* - write protection fault */ - -#define ESR0_EAV 0x00000800 /* true if EAR0 register valid */ -#define ESR15_EAV 0x00000800 /* true if EAR15 register valid */ - -/* - * ESFR1 - Exception Status Valid Flag Register - */ -#define ESFR1_ESR0 0x00000001 /* true if ESR0 is valid */ -#define ESFR1_ESR14 0x00004000 /* true if ESR14 is valid */ -#define ESFR1_ESR15 0x00008000 /* true if ESR15 is valid */ - -/* - * MSR - Media Status Register - */ -#define MSR0_AOVF 0x00000001 /* overflow exception accrued */ -#define MSRx_OVF 0x00000002 /* overflow exception detected */ -#define MSRx_SIE 0x0000003c /* last SIMD instruction exception detected */ -#define MSRx_SIE_NONE 0x00000000 /* - none detected */ -#define MSRx_SIE_FRkHI_ACCk 0x00000020 /* - exception at FRkHI or ACCk */ -#define MSRx_SIE_FRkLO_ACCk1 0x00000010 /* - exception at FRkLO or ACCk+1 */ -#define MSRx_SIE_FRk1HI_ACCk2 0x00000008 /* - exception at FRk+1HI or ACCk+2 */ -#define MSRx_SIE_FRk1LO_ACCk3 0x00000004 /* - exception at FRk+1LO or ACCk+3 */ -#define MSR0_MTT 0x00007000 /* type of last media trap detected */ -#define MSR0_MTT_NONE 0x00000000 /* - none detected */ -#define MSR0_MTT_OVERFLOW 0x00001000 /* - overflow detected */ -#define MSR0_HI 0x00c00000 /* hardware implementation */ -#define MSR0_HI_ROUNDING 0x00000000 /* - rounding mode */ -#define MSR0_HI_NONROUNDING 0x00c00000 /* - non-rounding mode */ -#define MSR0_EMCI 0x01000000 /* enable media custom instructions */ -#define MSR0_SRDAV 0x10000000 /* select rounding mode of MAVEH */ -#define MSR0_SRDAV_RDAV 0x00000000 /* - controlled by MSR.RDAV */ -#define MSR0_SRDAV_RD 0x10000000 /* - controlled by MSR.RD */ -#define MSR0_RDAV 0x20000000 /* rounding mode of MAVEH */ -#define MSR0_RDAV_NEAREST_MI 0x00000000 /* - round to nearest minus */ -#define MSR0_RDAV_NEAREST_PL 0x20000000 /* - round to nearest plus */ -#define MSR0_RD 0xc0000000 /* rounding mode */ -#define MSR0_RD_NEAREST 0x00000000 /* - nearest */ -#define MSR0_RD_ZERO 0x40000000 /* - zero */ -#define MSR0_RD_POS_INF 0x80000000 /* - positive infinity */ -#define MSR0_RD_NEG_INF 0xc0000000 /* - negative infinity */ - -/* - * IAMPR0-7 - Instruction Address Mapping Register - * DAMPR0-7 - Data Address Mapping Register - */ -#define xAMPRx_V 0x00000001 /* register content validity indicator */ -#define DAMPRx_WP 0x00000002 /* write protect */ -#define DAMPRx_WP_RW 0x00000000 /* - read/write */ -#define DAMPRx_WP_RO 0x00000002 /* - read-only */ -#define xAMPRx_C 0x00000004 /* cached/uncached */ -#define xAMPRx_C_CACHED 0x00000000 /* - cached */ -#define xAMPRx_C_UNCACHED 0x00000004 /* - uncached */ -#define xAMPRx_S 0x00000008 /* supervisor only */ -#define xAMPRx_S_USER 0x00000000 /* - userspace can access */ -#define xAMPRx_S_KERNEL 0x00000008 /* - kernel only */ -#define xAMPRx_SS 0x000000f0 /* segment size */ -#define xAMPRx_SS_16Kb 0x00000000 /* - 16 kilobytes */ -#define xAMPRx_SS_64Kb 0x00000010 /* - 64 kilobytes */ -#define xAMPRx_SS_256Kb 0x00000020 /* - 256 kilobytes */ -#define xAMPRx_SS_1Mb 0x00000030 /* - 1 megabyte */ -#define xAMPRx_SS_2Mb 0x00000040 /* - 2 megabytes */ -#define xAMPRx_SS_4Mb 0x00000050 /* - 4 megabytes */ -#define xAMPRx_SS_8Mb 0x00000060 /* - 8 megabytes */ -#define xAMPRx_SS_16Mb 0x00000070 /* - 16 megabytes */ -#define xAMPRx_SS_32Mb 0x00000080 /* - 32 megabytes */ -#define xAMPRx_SS_64Mb 0x00000090 /* - 64 megabytes */ -#define xAMPRx_SS_128Mb 0x000000a0 /* - 128 megabytes */ -#define xAMPRx_SS_256Mb 0x000000b0 /* - 256 megabytes */ -#define xAMPRx_SS_512Mb 0x000000c0 /* - 512 megabytes */ -#define xAMPRx_RESERVED8 0x00000100 /* reserved bit */ -#define xAMPRx_NG 0x00000200 /* non-global */ -#define xAMPRx_L 0x00000400 /* locked */ -#define xAMPRx_M 0x00000800 /* modified */ -#define xAMPRx_D 0x00001000 /* DAT entry */ -#define xAMPRx_RESERVED13 0x00002000 /* reserved bit */ -#define xAMPRx_PPFN 0xfff00000 /* physical page frame number */ - -#define xAMPRx_V_BIT 0 -#define DAMPRx_WP_BIT 1 -#define xAMPRx_C_BIT 2 -#define xAMPRx_S_BIT 3 -#define xAMPRx_RESERVED8_BIT 8 -#define xAMPRx_NG_BIT 9 -#define xAMPRx_L_BIT 10 -#define xAMPRx_M_BIT 11 -#define xAMPRx_D_BIT 12 -#define xAMPRx_RESERVED13_BIT 13 - -#define __get_IAMPR(R) ({ unsigned long x; asm volatile("movsg iampr"#R",%0" : "=r"(x)); x; }) -#define __get_DAMPR(R) ({ unsigned long x; asm volatile("movsg dampr"#R",%0" : "=r"(x)); x; }) - -#define __get_IAMLR(R) ({ unsigned long x; asm volatile("movsg iamlr"#R",%0" : "=r"(x)); x; }) -#define __get_DAMLR(R) ({ unsigned long x; asm volatile("movsg damlr"#R",%0" : "=r"(x)); x; }) - -#define __set_IAMPR(R,V) do { asm volatile("movgs %0,iampr"#R : : "r"(V)); } while(0) -#define __set_DAMPR(R,V) do { asm volatile("movgs %0,dampr"#R : : "r"(V)); } while(0) - -#define __set_IAMLR(R,V) do { asm volatile("movgs %0,iamlr"#R : : "r"(V)); } while(0) -#define __set_DAMLR(R,V) do { asm volatile("movgs %0,damlr"#R : : "r"(V)); } while(0) - -#define save_dampr(R, _dampr) \ -do { \ - asm volatile("movsg dampr"R",%0" : "=r"(_dampr)); \ -} while(0) - -#define restore_dampr(R, _dampr) \ -do { \ - asm volatile("movgs %0,dampr"R :: "r"(_dampr)); \ -} while(0) - -/* - * AMCR - Address Mapping Control Register - */ -#define AMCR_IAMRN 0x000000ff /* quantity of IAMPR registers */ -#define AMCR_DAMRN 0x0000ff00 /* quantity of DAMPR registers */ - -/* - * TTBR - Address Translation Table Base Register - */ -#define __get_TTBR() ({ unsigned long x; asm volatile("movsg ttbr,%0" : "=r"(x)); x; }) - -/* - * TPXR - TLB Probe Extend Register - */ -#define TPXR_E 0x00000001 -#define TPXR_LMAX_SHIFT 20 -#define TPXR_LMAX_SMASK 0xf -#define TPXR_WMAX_SHIFT 24 -#define TPXR_WMAX_SMASK 0xf -#define TPXR_WAY_SHIFT 28 -#define TPXR_WAY_SMASK 0xf - -/* - * DCR - Debug Control Register - */ -#define DCR_IBCE3 0x00000001 /* break on conditional insn pointed to by IBAR3 */ -#define DCR_IBE3 0x00000002 /* break on insn pointed to by IBAR3 */ -#define DCR_IBCE1 0x00000004 /* break on conditional insn pointed to by IBAR2 */ -#define DCR_IBE1 0x00000008 /* break on insn pointed to by IBAR2 */ -#define DCR_IBCE2 0x00000010 /* break on conditional insn pointed to by IBAR1 */ -#define DCR_IBE2 0x00000020 /* break on insn pointed to by IBAR1 */ -#define DCR_IBCE0 0x00000040 /* break on conditional insn pointed to by IBAR0 */ -#define DCR_IBE0 0x00000080 /* break on insn pointed to by IBAR0 */ - -#define DCR_DDBE1 0x00004000 /* use DBDR1x when checking DBAR1 */ -#define DCR_DWBE1 0x00008000 /* break on store to address in DBAR1/DBMR1x */ -#define DCR_DRBE1 0x00010000 /* break on load from address in DBAR1/DBMR1x */ -#define DCR_DDBE0 0x00020000 /* use DBDR0x when checking DBAR0 */ -#define DCR_DWBE0 0x00040000 /* break on store to address in DBAR0/DBMR0x */ -#define DCR_DRBE0 0x00080000 /* break on load from address in DBAR0/DBMR0x */ - -#define DCR_EIM 0x0c000000 /* external interrupt disable */ -#define DCR_IBM 0x10000000 /* instruction break disable */ -#define DCR_SE 0x20000000 /* single step enable */ -#define DCR_EBE 0x40000000 /* exception break enable */ - -/* - * BRR - Break Interrupt Request Register - */ -#define BRR_ST 0x00000001 /* single-step detected */ -#define BRR_SB 0x00000002 /* break instruction detected */ -#define BRR_BB 0x00000004 /* branch with hint detected */ -#define BRR_CBB 0x00000008 /* branch to LR detected */ -#define BRR_IBx 0x000000f0 /* hardware breakpoint detected */ -#define BRR_DBx 0x00000f00 /* hardware watchpoint detected */ -#define BRR_DBNEx 0x0000f000 /* ? */ -#define BRR_EBTT 0x00ff0000 /* trap type of exception break */ -#define BRR_TB 0x10000000 /* external break request detected */ -#define BRR_CB 0x20000000 /* ICE break command detected */ -#define BRR_EB 0x40000000 /* exception break detected */ - -/* - * BPSR - Break PSR Save Register - */ -#define BPSR_BET 0x00000001 /* former PSR.ET */ -#define BPSR_BS 0x00001000 /* former PSR.S */ - -#endif /* _ASM_SPR_REGS_H */ diff --git a/arch/frv/include/asm/string.h b/arch/frv/include/asm/string.h deleted file mode 100644 index 1f6c35990439..000000000000 --- a/arch/frv/include/asm/string.h +++ /dev/null @@ -1,50 +0,0 @@ -/* string.h: FRV string handling - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_STRING_H_ -#define _ASM_STRING_H_ - -#ifdef __KERNEL__ /* only set these up for kernel code */ - -#define __HAVE_ARCH_MEMSET 1 -#define __HAVE_ARCH_MEMCPY 1 - -extern void *memset(void *, int, __kernel_size_t); -extern void *memcpy(void *, const void *, __kernel_size_t); - -#else /* KERNEL */ - -/* - * let user libraries deal with these, - * IMHO the kernel has no place defining these functions for user apps - */ - -#define __HAVE_ARCH_STRCPY 1 -#define __HAVE_ARCH_STRNCPY 1 -#define __HAVE_ARCH_STRCAT 1 -#define __HAVE_ARCH_STRNCAT 1 -#define __HAVE_ARCH_STRCMP 1 -#define __HAVE_ARCH_STRNCMP 1 -#define __HAVE_ARCH_STRCHR 1 -#define __HAVE_ARCH_STRRCHR 1 -#define __HAVE_ARCH_STRSTR 1 -#define __HAVE_ARCH_STRLEN 1 -#define __HAVE_ARCH_STRNLEN 1 -#define __HAVE_ARCH_MEMSET 1 -#define __HAVE_ARCH_MEMCPY 1 -#define __HAVE_ARCH_MEMMOVE 1 -#define __HAVE_ARCH_MEMSCAN 1 -#define __HAVE_ARCH_MEMCMP 1 -#define __HAVE_ARCH_MEMCHR 1 -#define __HAVE_ARCH_STRTOK 1 - -#endif /* KERNEL */ -#endif /* _ASM_STRING_H_ */ diff --git a/arch/frv/include/asm/switch_to.h b/arch/frv/include/asm/switch_to.h deleted file mode 100644 index 2cf0f6a7fbb1..000000000000 --- a/arch/frv/include/asm/switch_to.h +++ /dev/null @@ -1,35 +0,0 @@ -/* FR-V CPU basic task switching - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SWITCH_TO_H -#define _ASM_SWITCH_TO_H - -#include <linux/thread_info.h> - -/* - * switch_to(prev, next) should switch from task `prev' to `next' - * `prev' will never be the same as `next'. - * The `mb' is to tell GCC not to cache `current' across this call. - */ -extern asmlinkage -struct task_struct *__switch_to(struct thread_struct *prev_thread, - struct thread_struct *next_thread, - struct task_struct *prev); - -#define switch_to(prev, next, last) \ -do { \ - (prev)->thread.sched_lr = \ - (unsigned long) __builtin_return_address(0); \ - (last) = __switch_to(&(prev)->thread, &(next)->thread, (prev)); \ - mb(); \ -} while(0) - -#endif /* _ASM_SWITCH_TO_H */ diff --git a/arch/frv/include/asm/syscall.h b/arch/frv/include/asm/syscall.h deleted file mode 100644 index 70689eb29b98..000000000000 --- a/arch/frv/include/asm/syscall.h +++ /dev/null @@ -1,123 +0,0 @@ -/* syscall parameter access functions - * - * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#ifndef _ASM_SYSCALL_H -#define _ASM_SYSCALL_H - -#include <linux/err.h> -#include <asm/ptrace.h> - -/* - * Get the system call number or -1 - */ -static inline long syscall_get_nr(struct task_struct *task, - struct pt_regs *regs) -{ - return regs->syscallno; -} - -/* - * Restore the clobbered GR8 register - * (1st syscall arg was overwritten with syscall return or error) - */ -static inline void syscall_rollback(struct task_struct *task, - struct pt_regs *regs) -{ - regs->gr8 = regs->orig_gr8; -} - -/* - * See if the syscall return value is an error, returning it if it is and 0 if - * not - */ -static inline long syscall_get_error(struct task_struct *task, - struct pt_regs *regs) -{ - return IS_ERR_VALUE(regs->gr8) ? regs->gr8 : 0; -} - -/* - * Get the syscall return value - */ -static inline long syscall_get_return_value(struct task_struct *task, - struct pt_regs *regs) -{ - return regs->gr8; -} - -/* - * Set the syscall return value - */ -static inline void syscall_set_return_value(struct task_struct *task, - struct pt_regs *regs, - int error, long val) -{ - if (error) - regs->gr8 = -error; - else - regs->gr8 = val; -} - -/* - * Retrieve the system call arguments - */ -static inline void syscall_get_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - unsigned long *args) -{ - /* - * Do this simply for now. If we need to start supporting - * fetching arguments from arbitrary indices, this will need some - * extra logic. Presently there are no in-tree users that depend - * on this behaviour. - */ - BUG_ON(i); - - /* Argument pattern is: GR8, GR9, GR10, GR11, GR12, GR13 */ - switch (n) { - case 6: args[5] = regs->gr13; - case 5: args[4] = regs->gr12; - case 4: args[3] = regs->gr11; - case 3: args[2] = regs->gr10; - case 2: args[1] = regs->gr9; - case 1: args[0] = regs->gr8; - break; - default: - BUG(); - } -} - -/* - * Alter the system call arguments - */ -static inline void syscall_set_arguments(struct task_struct *task, - struct pt_regs *regs, - unsigned int i, unsigned int n, - const unsigned long *args) -{ - /* Same note as above applies */ - BUG_ON(i); - - switch (n) { - case 6: regs->gr13 = args[5]; - case 5: regs->gr12 = args[4]; - case 4: regs->gr11 = args[3]; - case 3: regs->gr10 = args[2]; - case 2: regs->gr9 = args[1]; - case 1: regs->gr8 = args[0]; - break; - default: - BUG(); - } -} - -#endif /* _ASM_SYSCALL_H */ diff --git a/arch/frv/include/asm/termios.h b/arch/frv/include/asm/termios.h deleted file mode 100644 index 5a8c63554617..000000000000 --- a/arch/frv/include/asm/termios.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_TERMIOS_H -#define _ASM_TERMIOS_H - -#include <uapi/asm/termios.h> - -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#include <asm-generic/termios-base.h> -#endif /* _ASM_TERMIOS_H */ diff --git a/arch/frv/include/asm/thread_info.h b/arch/frv/include/asm/thread_info.h deleted file mode 100644 index 0f950845fad9..000000000000 --- a/arch/frv/include/asm/thread_info.h +++ /dev/null @@ -1,116 +0,0 @@ -/* thread_info.h: description - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * Derived from include/asm-i386/thread_info.h - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_THREAD_INFO_H -#define _ASM_THREAD_INFO_H - -#ifdef __KERNEL__ - -#ifndef __ASSEMBLY__ -#include <asm/processor.h> -#endif - -#define THREAD_SIZE 8192 - -/* - * low level task data that entry.S needs immediate access to - * - this struct should fit entirely inside of one cache line - * - this struct shares the supervisor stack pages - * - if the contents of this structure are changed, the assembly constants must also be changed - */ -#ifndef __ASSEMBLY__ - -struct thread_info { - struct task_struct *task; /* main task structure */ - unsigned long flags; /* low level flags */ - unsigned long status; /* thread-synchronous flags */ - __u32 cpu; /* current CPU */ - int preempt_count; /* 0 => preemptable, <0 => BUG */ - - mm_segment_t addr_limit; /* thread address space: - * 0-0xBFFFFFFF for user-thead - * 0-0xFFFFFFFF for kernel-thread - */ - - __u8 supervisor_stack[0]; -}; - -#else /* !__ASSEMBLY__ */ - -#include <asm/asm-offsets.h> - -#endif - -/* - * macros/functions for gaining access to the thread information structure - */ -#ifndef __ASSEMBLY__ - -#define INIT_THREAD_INFO(tsk) \ -{ \ - .task = &tsk, \ - .flags = 0, \ - .cpu = 0, \ - .preempt_count = INIT_PREEMPT_COUNT, \ - .addr_limit = KERNEL_DS, \ -} - -/* how to get the thread information struct from C */ -register struct thread_info *__current_thread_info asm("gr15"); - -#define current_thread_info() ({ __current_thread_info; }) - -#endif /* __ASSEMBLY__ */ - -/* - * thread information flags - * - these are process state flags that various assembly files may need to access - * - pending work-to-be-done flags are in LSW - * - other flags in MSW - */ -#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ -#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */ -#define TIF_SIGPENDING 2 /* signal pending */ -#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ -#define TIF_SINGLESTEP 4 /* restore singlestep on return to user mode */ -#define TIF_RESTORE_SIGMASK 5 /* restore signal mask in do_signal() */ -#define TIF_MEMDIE 7 /* is terminating due to OOM killer */ - -#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) -#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) -#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) -#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) -#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) - -/* work to do on interrupt/exception return */ -#define _TIF_WORK_MASK \ - (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_SINGLESTEP) - -/* work to do on any return to u-space */ -#define _TIF_ALLWORK_MASK (_TIF_WORK_MASK | _TIF_SYSCALL_TRACE) - -#if _TIF_ALLWORK_MASK >= 0x2000 -#error "_TIF_ALLWORK_MASK won't fit in an ANDI now (see entry.S)" -#endif - -/* - * Thread-synchronous status. - * - * This is different from the flags in that nobody else - * ever touches our thread-synchronous status, so we don't - * have to worry about atomic accesses. - */ -#define TS_USEDFPM 0x0001 /* FPU/Media was used by this task this quantum (SMP) */ - -#endif /* __KERNEL__ */ - -#endif /* _ASM_THREAD_INFO_H */ diff --git a/arch/frv/include/asm/timer-regs.h b/arch/frv/include/asm/timer-regs.h deleted file mode 100644 index 6c5a871ce5e9..000000000000 --- a/arch/frv/include/asm/timer-regs.h +++ /dev/null @@ -1,106 +0,0 @@ -/* timer-regs.h: hardware timer register definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_TIMER_REGS_H -#define _ASM_TIMER_REGS_H - -#include <asm/sections.h> - -extern unsigned long __nongprelbss __clkin_clock_speed_HZ; -extern unsigned long __nongprelbss __ext_bus_clock_speed_HZ; -extern unsigned long __nongprelbss __res_bus_clock_speed_HZ; -extern unsigned long __nongprelbss __sdram_clock_speed_HZ; -extern unsigned long __nongprelbss __core_bus_clock_speed_HZ; -extern unsigned long __nongprelbss __core_clock_speed_HZ; -extern unsigned long __nongprelbss __dsu_clock_speed_HZ; -extern unsigned long __nongprelbss __serial_clock_speed_HZ; - -#define __get_CLKC() ({ *(volatile unsigned long *)(0xfeff9a00); }) - -static inline void __set_CLKC(unsigned long v) -{ - int tmp; - - asm volatile(" st%I0.p %2,%M0 \n" - " setlos %3,%1 \n" - " membar \n" - "0: \n" - " subicc %1,#1,%1,icc0 \n" - " bnc icc0,#1,0b \n" - : "=m"(*(volatile unsigned long *) 0xfeff9a00), "=r"(tmp) - : "r"(v), "i"(256) - : "icc0"); -} - -#define __get_TCTR() ({ *(volatile unsigned long *)(0xfeff9418); }) -#define __get_TPRV() ({ *(volatile unsigned long *)(0xfeff9420); }) -#define __get_TPRCKSL() ({ *(volatile unsigned long *)(0xfeff9428); }) -#define __get_TCSR(T) ({ *(volatile unsigned long *)(0xfeff9400 + 8 * (T)); }) -#define __get_TxCKSL(T) ({ *(volatile unsigned long *)(0xfeff9430 + 8 * (T)); }) - -#define __get_TCSR_DATA(T) ({ __get_TCSR(T) >> 24; }) - -#define __set_TCTR(V) do { *(volatile unsigned long *)(0xfeff9418) = (V); mb(); } while(0) -#define __set_TPRV(V) do { *(volatile unsigned long *)(0xfeff9420) = (V) << 24; mb(); } while(0) -#define __set_TPRCKSL(V) do { *(volatile unsigned long *)(0xfeff9428) = (V); mb(); } while(0) -#define __set_TCSR(T,V) \ -do { *(volatile unsigned long *)(0xfeff9400 + 8 * (T)) = (V); mb(); } while(0) - -#define __set_TxCKSL(T,V) \ -do { *(volatile unsigned long *)(0xfeff9430 + 8 * (T)) = (V); mb(); } while(0) - -#define __set_TCSR_DATA(T,V) __set_TCSR(T, (V) << 24) -#define __set_TxCKSL_DATA(T,V) __set_TxCKSL(T, TxCKSL_EIGHT | __TxCKSL_SELECT((V))) - -/* clock control register */ -#define CLKC_CMODE 0x0f000000 -#define CLKC_SLPL 0x000f0000 -#define CLKC_P0 0x00000100 -#define CLKC_CM 0x00000003 - -#define CLKC_CMODE_s 24 - -/* timer control register - non-readback mode */ -#define TCTR_MODE_0 0x00000000 -#define TCTR_MODE_2 0x04000000 -#define TCTR_MODE_4 0x08000000 -#define TCTR_MODE_5 0x0a000000 -#define TCTR_RL_LATCH 0x00000000 -#define TCTR_RL_RW_LOW8 0x10000000 -#define TCTR_RL_RW_HIGH8 0x20000000 -#define TCTR_RL_RW_LH8 0x30000000 -#define TCTR_SC_CTR0 0x00000000 -#define TCTR_SC_CTR1 0x40000000 -#define TCTR_SC_CTR2 0x80000000 - -/* timer control register - readback mode */ -#define TCTR_CNT0 0x02000000 -#define TCTR_CNT1 0x04000000 -#define TCTR_CNT2 0x08000000 -#define TCTR_NSTATUS 0x10000000 -#define TCTR_NCOUNT 0x20000000 -#define TCTR_SC_READBACK 0xc0000000 - -/* timer control status registers - non-readback mode */ -#define TCSRx_DATA 0xff000000 - -/* timer control status registers - readback mode */ -#define TCSRx_OUTPUT 0x80000000 -#define TCSRx_NULLCOUNT 0x40000000 -#define TCSRx_RL 0x30000000 -#define TCSRx_MODE 0x07000000 - -/* timer clock select registers */ -#define TxCKSL_SELECT 0x0f000000 -#define __TxCKSL_SELECT(X) ((X) << 24) -#define TxCKSL_EIGHT 0xf0000000 - -#endif /* _ASM_TIMER_REGS_H */ diff --git a/arch/frv/include/asm/timex.h b/arch/frv/include/asm/timex.h deleted file mode 100644 index bf53166f2793..000000000000 --- a/arch/frv/include/asm/timex.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* timex.h: FR-V architecture timex specifications - */ -#ifndef _ASM_TIMEX_H -#define _ASM_TIMEX_H - -#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ -#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */ - -typedef unsigned long cycles_t; - -static inline cycles_t get_cycles(void) -{ - return 0; -} - -#define vxtime_lock() do {} while (0) -#define vxtime_unlock() do {} while (0) - -/* This attribute is used in include/linux/jiffies.h alongside with - * __cacheline_aligned_in_smp. It is assumed that __cacheline_aligned_in_smp - * for frv does not contain another section specification. - */ -#define __jiffy_arch_data __attribute__((__section__(".data"))) - -#endif - diff --git a/arch/frv/include/asm/tlb.h b/arch/frv/include/asm/tlb.h deleted file mode 100644 index d3e361ad725a..000000000000 --- a/arch/frv/include/asm/tlb.h +++ /dev/null @@ -1,28 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_TLB_H -#define _ASM_TLB_H - -#include <asm/tlbflush.h> - -#ifdef CONFIG_MMU -extern void check_pgt_cache(void); -#else -#define check_pgt_cache() do {} while(0) -#endif - -/* - * we don't need any special per-pte or per-vma handling... - */ -#define tlb_start_vma(tlb, vma) do { } while (0) -#define tlb_end_vma(tlb, vma) do { } while (0) -#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0) - -/* - * .. because we flush the whole mm when it fills up - */ -#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) - -#include <asm-generic/tlb.h> - -#endif /* _ASM_TLB_H */ - diff --git a/arch/frv/include/asm/tlbflush.h b/arch/frv/include/asm/tlbflush.h deleted file mode 100644 index 75879420f578..000000000000 --- a/arch/frv/include/asm/tlbflush.h +++ /dev/null @@ -1,73 +0,0 @@ -/* tlbflush.h: TLB flushing functions - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_TLBFLUSH_H -#define _ASM_TLBFLUSH_H - -#include <linux/mm.h> -#include <asm/processor.h> - -#ifdef CONFIG_MMU - -#ifndef __ASSEMBLY__ -extern asmlinkage void __flush_tlb_all(void); -extern asmlinkage void __flush_tlb_mm(unsigned long contextid); -extern asmlinkage void __flush_tlb_page(unsigned long contextid, unsigned long start); -extern asmlinkage void __flush_tlb_range(unsigned long contextid, - unsigned long start, unsigned long end); -#endif /* !__ASSEMBLY__ */ - -#define flush_tlb_all() \ -do { \ - preempt_disable(); \ - __flush_tlb_all(); \ - preempt_enable(); \ -} while(0) - -#define flush_tlb_mm(mm) \ -do { \ - preempt_disable(); \ - __flush_tlb_mm((mm)->context.id); \ - preempt_enable(); \ -} while(0) - -#define flush_tlb_range(vma,start,end) \ -do { \ - preempt_disable(); \ - __flush_tlb_range((vma)->vm_mm->context.id, start, end); \ - preempt_enable(); \ -} while(0) - -#define flush_tlb_page(vma,addr) \ -do { \ - preempt_disable(); \ - __flush_tlb_page((vma)->vm_mm->context.id, addr); \ - preempt_enable(); \ -} while(0) - - -#define __flush_tlb_global() flush_tlb_all() -#define flush_tlb() flush_tlb_all() -#define flush_tlb_kernel_range(start, end) flush_tlb_all() - -#else - -#define flush_tlb() BUG() -#define flush_tlb_all() BUG() -#define flush_tlb_mm(mm) BUG() -#define flush_tlb_page(vma,addr) BUG() -#define flush_tlb_range(mm,start,end) BUG() -#define flush_tlb_kernel_range(start, end) BUG() - -#endif - - -#endif /* _ASM_TLBFLUSH_H */ diff --git a/arch/frv/include/asm/topology.h b/arch/frv/include/asm/topology.h deleted file mode 100644 index 207603071f78..000000000000 --- a/arch/frv/include/asm/topology.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_TOPOLOGY_H -#define _ASM_TOPOLOGY_H - -#ifdef CONFIG_NUMA - -#error NUMA not supported yet - -#endif /* CONFIG_NUMA */ - -#include <asm-generic/topology.h> - -#endif /* _ASM_TOPOLOGY_H */ diff --git a/arch/frv/include/asm/types.h b/arch/frv/include/asm/types.h deleted file mode 100644 index 6bc63650d832..000000000000 --- a/arch/frv/include/asm/types.h +++ /dev/null @@ -1,22 +0,0 @@ -/* types.h: FRV types - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_TYPES_H -#define _ASM_TYPES_H - -#include <uapi/asm/types.h> - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ - -#define BITS_PER_LONG 32 - -#endif /* _ASM_TYPES_H */ diff --git a/arch/frv/include/asm/uaccess.h b/arch/frv/include/asm/uaccess.h deleted file mode 100644 index ff9562dc6825..000000000000 --- a/arch/frv/include/asm/uaccess.h +++ /dev/null @@ -1,285 +0,0 @@ -/* uaccess.h: userspace accessor functions - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_UACCESS_H -#define _ASM_UACCESS_H - -/* - * User space memory access functions - */ -#include <linux/mm.h> -#include <asm/segment.h> -#include <asm/sections.h> -#include <asm/extable.h> - -#define __ptr(x) ((unsigned long __force *)(x)) - -/* - * check that a range of addresses falls within the current address limit - */ -static inline int ___range_ok(unsigned long addr, unsigned long size) -{ -#ifdef CONFIG_MMU - int flag = -EFAULT, tmp; - - asm volatile ( - " addcc %3,%2,%1,icc0 \n" /* set C-flag if addr+size>4GB */ - " subcc.p %1,%4,gr0,icc1 \n" /* jump if addr+size>limit */ - " bc icc0,#0,0f \n" - " bhi icc1,#0,0f \n" - " setlos #0,%0 \n" /* mark okay */ - "0: \n" - : "=r"(flag), "=&r"(tmp) - : "r"(addr), "r"(size), "r"(get_addr_limit()), "0"(flag) - ); - - return flag; - -#else - - if (addr < memory_start || - addr > memory_end || - size > memory_end - memory_start || - addr + size > memory_end) - return -EFAULT; - - return 0; -#endif -} - -#define __range_ok(addr,size) ___range_ok((unsigned long) (addr), (unsigned long) (size)) - -#define access_ok(type,addr,size) (__range_ok((void __user *)(addr), (size)) == 0) -#define __access_ok(addr,size) (__range_ok((addr), (size)) == 0) - - -/* - * These are the main single-value transfer routines. They automatically - * use the right size if we just have the right pointer type. - */ -#define __put_user(x, ptr) \ -({ \ - int __pu_err = 0; \ - \ - typeof(*(ptr)) __pu_val = (x); \ - __chk_user_ptr(ptr); \ - \ - switch (sizeof (*(ptr))) { \ - case 1: \ - __put_user_asm(__pu_err, __pu_val, ptr, "b", "r"); \ - break; \ - case 2: \ - __put_user_asm(__pu_err, __pu_val, ptr, "h", "r"); \ - break; \ - case 4: \ - __put_user_asm(__pu_err, __pu_val, ptr, "", "r"); \ - break; \ - case 8: \ - __put_user_asm(__pu_err, __pu_val, ptr, "d", "e"); \ - break; \ - default: \ - __pu_err = __put_user_bad(); \ - break; \ - } \ - __pu_err; \ -}) - -#define put_user(x, ptr) \ -({ \ - typeof(*(ptr)) __user *_p = (ptr); \ - int _e; \ - \ - _e = __range_ok(_p, sizeof(*_p)); \ - if (_e == 0) \ - _e = __put_user((x), _p); \ - _e; \ -}) - -extern int __put_user_bad(void); - -/* - * Tell gcc we read from memory instead of writing: this is because - * we do not write to any memory gcc knows about, so there are no - * aliasing issues. - */ - -#ifdef CONFIG_MMU - -#define __put_user_asm(err,x,ptr,dsize,constraint) \ -do { \ - asm volatile("1: st"dsize"%I1 %2,%M1 \n" \ - "2: \n" \ - ".subsection 2 \n" \ - "3: setlos %3,%0 \n" \ - " bra 2b \n" \ - ".previous \n" \ - ".section __ex_table,\"a\" \n" \ - " .balign 8 \n" \ - " .long 1b,3b \n" \ - ".previous" \ - : "=r" (err) \ - : "m" (*__ptr(ptr)), constraint (x), "i"(-EFAULT), "0"(err) \ - : "memory"); \ -} while (0) - -#else - -#define __put_user_asm(err,x,ptr,bwl,con) \ -do { \ - asm(" st"bwl"%I0 %1,%M0 \n" \ - " membar \n" \ - : \ - : "m" (*__ptr(ptr)), con (x) \ - : "memory"); \ -} while (0) - -#endif - -/*****************************************************************************/ -/* - * - */ -#define __get_user(x, ptr) \ -({ \ - int __gu_err = 0; \ - __chk_user_ptr(ptr); \ - \ - switch (sizeof(*(ptr))) { \ - case 1: { \ - unsigned char __gu_val; \ - __get_user_asm(__gu_err, __gu_val, ptr, "ub", "=r"); \ - (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ - break; \ - } \ - case 2: { \ - unsigned short __gu_val; \ - __get_user_asm(__gu_err, __gu_val, ptr, "uh", "=r"); \ - (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ - break; \ - } \ - case 4: { \ - unsigned int __gu_val; \ - __get_user_asm(__gu_err, __gu_val, ptr, "", "=r"); \ - (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ - break; \ - } \ - case 8: { \ - unsigned long long __gu_val; \ - __get_user_asm(__gu_err, __gu_val, ptr, "d", "=e"); \ - (x) = *(__force __typeof__(*(ptr)) *) &__gu_val; \ - break; \ - } \ - default: \ - __gu_err = __get_user_bad(); \ - break; \ - } \ - __gu_err; \ -}) - -#define get_user(x, ptr) \ -({ \ - const typeof(*(ptr)) __user *_p = (ptr);\ - int _e; \ - \ - _e = __range_ok(_p, sizeof(*_p)); \ - if (likely(_e == 0)) \ - _e = __get_user((x), _p); \ - else \ - (x) = (typeof(x)) 0; \ - _e; \ -}) - -extern int __get_user_bad(void); - -#ifdef CONFIG_MMU - -#define __get_user_asm(err,x,ptr,dtype,constraint) \ -do { \ - asm("1: ld"dtype"%I2 %M2,%1 \n" \ - "2: \n" \ - ".subsection 2 \n" \ - "3: setlos %3,%0 \n" \ - " setlos #0,%1 \n" \ - " bra 2b \n" \ - ".previous \n" \ - ".section __ex_table,\"a\" \n" \ - " .balign 8 \n" \ - " .long 1b,3b \n" \ - ".previous" \ - : "=r" (err), constraint (x) \ - : "m" (*__ptr(ptr)), "i"(-EFAULT), "0"(err) \ - ); \ -} while(0) - -#else - -#define __get_user_asm(err,x,ptr,bwl,con) \ - asm(" ld"bwl"%I1 %M1,%0 \n" \ - " membar \n" \ - : con(x) \ - : "m" (*__ptr(ptr))) - -#endif - -/*****************************************************************************/ -/* - * - */ - -#define ____force(x) (__force void *)(void __user *)(x) -#ifdef CONFIG_MMU -extern long __memset_user(void *dst, unsigned long count); -extern long __memcpy_user(void *dst, const void *src, unsigned long count); - -#define __clear_user(dst,count) __memset_user(____force(dst), (count)) - -#else - -#define __clear_user(dst,count) (memset(____force(dst), 0, (count)), 0) - -#endif - -static inline unsigned long -raw_copy_from_user(void *to, const void __user *from, unsigned long n) -{ -#ifdef CONFIG_MMU - return __memcpy_user(to, (__force const void *)from, n); -#else - memcpy(to, (__force const void *)from, n); - return 0; -#endif -} - -static inline unsigned long -raw_copy_to_user(void __user *to, const void *from, unsigned long n) -{ -#ifdef CONFIG_MMU - return __memcpy_user((__force void *)to, from, n); -#else - memcpy((__force void *)to, from, n); - return 0; -#endif -} -#define INLINE_COPY_TO_USER -#define INLINE_COPY_FROM_USER - -static inline unsigned long __must_check -clear_user(void __user *to, unsigned long n) -{ - if (likely(__access_ok(to, n))) - n = __clear_user(to, n); - return n; -} - -extern long strncpy_from_user(char *dst, const char __user *src, long count); -extern long strnlen_user(const char __user *src, long count); - -#endif /* _ASM_UACCESS_H */ diff --git a/arch/frv/include/asm/ucontext.h b/arch/frv/include/asm/ucontext.h deleted file mode 100644 index 0cc2d95dd209..000000000000 --- a/arch/frv/include/asm/ucontext.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_UCONTEXT_H -#define _ASM_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif diff --git a/arch/frv/include/asm/unaligned.h b/arch/frv/include/asm/unaligned.h deleted file mode 100644 index 6c61c05b2e0c..000000000000 --- a/arch/frv/include/asm/unaligned.h +++ /dev/null @@ -1,22 +0,0 @@ -/* unaligned.h: unaligned access handler - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_UNALIGNED_H -#define _ASM_UNALIGNED_H - -#include <linux/unaligned/le_byteshift.h> -#include <linux/unaligned/be_struct.h> -#include <linux/unaligned/generic.h> - -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be - -#endif /* _ASM_UNALIGNED_H */ diff --git a/arch/frv/include/asm/unistd.h b/arch/frv/include/asm/unistd.h deleted file mode 100644 index b4b3f9b26b81..000000000000 --- a/arch/frv/include/asm/unistd.h +++ /dev/null @@ -1,34 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _ASM_UNISTD_H_ -#define _ASM_UNISTD_H_ - -#include <uapi/asm/unistd.h> - - -#define NR_syscalls 338 - -/* #define __ARCH_WANT_OLD_READDIR */ -#define __ARCH_WANT_OLD_STAT -#define __ARCH_WANT_STAT64 -#define __ARCH_WANT_SYS_ALARM -/* #define __ARCH_WANT_SYS_GETHOSTNAME */ -#define __ARCH_WANT_SYS_IPC -#define __ARCH_WANT_SYS_PAUSE -/* #define __ARCH_WANT_SYS_SIGNAL */ -#define __ARCH_WANT_SYS_TIME -#define __ARCH_WANT_SYS_UTIME -#define __ARCH_WANT_SYS_WAITPID -#define __ARCH_WANT_SYS_SOCKETCALL -#define __ARCH_WANT_SYS_FADVISE64 -#define __ARCH_WANT_SYS_GETPGRP -#define __ARCH_WANT_SYS_LLSEEK -#define __ARCH_WANT_SYS_NICE -/* #define __ARCH_WANT_SYS_OLD_GETRLIMIT */ -#define __ARCH_WANT_SYS_OLDUMOUNT -/* #define __ARCH_WANT_SYS_SIGPENDING */ -#define __ARCH_WANT_SYS_SIGPROCMASK -#define __ARCH_WANT_SYS_FORK -#define __ARCH_WANT_SYS_VFORK -#define __ARCH_WANT_SYS_CLONE - -#endif /* _ASM_UNISTD_H_ */ diff --git a/arch/frv/include/asm/user.h b/arch/frv/include/asm/user.h deleted file mode 100644 index 82fa8fab64ae..000000000000 --- a/arch/frv/include/asm/user.h +++ /dev/null @@ -1,80 +0,0 @@ -/* user.h: FR-V core file format stuff - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_USER_H -#define _ASM_USER_H - -#include <asm/page.h> -#include <asm/registers.h> - -/* Core file format: The core file is written in such a way that gdb - * can understand it and provide useful information to the user (under - * linux we use the 'trad-core' bfd). There are quite a number of - * obstacles to being able to view the contents of the floating point - * registers, and until these are solved you will not be able to view - * the contents of them. Actually, you can read in the core file and - * look at the contents of the user struct to find out what the - * floating point registers contain. - * - * The actual file contents are as follows: - * UPAGE: - * 1 page consisting of a user struct that tells gdb what is present - * in the file. Directly after this is a copy of the task_struct, - * which is currently not used by gdb, but it may come in useful at - * some point. All of the registers are stored as part of the - * upage. The upage should always be only one page. - * - * DATA: - * The data area is stored. We use current->end_text to - * current->brk to pick up all of the user variables, plus any - * memory that may have been malloced. No attempt is made to - * determine if a page is demand-zero or if a page is totally - * unused, we just cover the entire range. All of the addresses are - * rounded in such a way that an integral number of pages is - * written. - * - * STACK: - * We need the stack information in order to get a meaningful - * backtrace. We need to write the data from (esp) to - * current->start_stack, so we round each of these off in order to - * be able to write an integer number of pages. The minimum core - * file size is 3 pages, or 12288 bytes. - */ - -/* When the kernel dumps core, it starts by dumping the user struct - - * this will be used by gdb to figure out where the data and stack segments - * are within the file, and what virtual addresses to use. - */ -struct user { - /* We start with the registers, to mimic the way that "memory" is returned - * from the ptrace(3,...) function. */ - struct user_context regs; - - /* The rest of this junk is to help gdb figure out what goes where */ - unsigned long u_tsize; /* Text segment size (pages). */ - unsigned long u_dsize; /* Data segment size (pages). */ - unsigned long u_ssize; /* Stack segment size (pages). */ - unsigned long start_code; /* Starting virtual address of text. */ - unsigned long start_stack; /* Starting virtual address of stack area. - * This is actually the bottom of the stack, - * the top of the stack is always found in the - * esp register. */ - long int signal; /* Signal that caused the core dump. */ - - unsigned long magic; /* To uniquely identify a core file */ - char u_comm[32]; /* User command that was responsible */ -}; - -#define NBPG PAGE_SIZE -#define UPAGES 1 -#define HOST_TEXT_START_ADDR (u.start_code) -#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) - -#endif diff --git a/arch/frv/include/asm/vga.h b/arch/frv/include/asm/vga.h deleted file mode 100644 index a702c800a229..000000000000 --- a/arch/frv/include/asm/vga.h +++ /dev/null @@ -1,17 +0,0 @@ -/* vga.h: VGA register stuff - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_VGA_H -#define _ASM_VGA_H - - - -#endif /* _ASM_VGA_H */ diff --git a/arch/frv/include/asm/virtconvert.h b/arch/frv/include/asm/virtconvert.h deleted file mode 100644 index b26d70ab9111..000000000000 --- a/arch/frv/include/asm/virtconvert.h +++ /dev/null @@ -1,41 +0,0 @@ -/* virtconvert.h: virtual/physical/page address conversion - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_VIRTCONVERT_H -#define _ASM_VIRTCONVERT_H - -/* - * Macros used for converting between virtual and physical mappings. - */ - -#ifdef __KERNEL__ - -#include <asm/setup.h> - -#ifdef CONFIG_MMU - -#define phys_to_virt(vaddr) ((void *) ((unsigned long)(vaddr) + PAGE_OFFSET)) -#define virt_to_phys(vaddr) ((unsigned long) (vaddr) - PAGE_OFFSET) - -#else - -#define phys_to_virt(vaddr) ((void *) (vaddr)) -#define virt_to_phys(vaddr) ((unsigned long) (vaddr)) - -#endif - -#define virt_to_bus virt_to_phys -#define bus_to_virt phys_to_virt - -#define __page_address(page) (PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT)) -#define page_to_phys(page) virt_to_phys((void *)__page_address(page)) - -#endif -#endif diff --git a/arch/frv/include/asm/xor.h b/arch/frv/include/asm/xor.h deleted file mode 100644 index c82eb12a5b18..000000000000 --- a/arch/frv/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/xor.h> diff --git a/arch/frv/include/uapi/asm/Kbuild b/arch/frv/include/uapi/asm/Kbuild deleted file mode 100644 index 5354b0f84d41..000000000000 --- a/arch/frv/include/uapi/asm/Kbuild +++ /dev/null @@ -1,5 +0,0 @@ -# UAPI Header export list -include include/uapi/asm-generic/Kbuild.asm - -generic-y += siginfo.h -generic-y += bpf_perf_event.h diff --git a/arch/frv/include/uapi/asm/auxvec.h b/arch/frv/include/uapi/asm/auxvec.h deleted file mode 100644 index 07710778fa10..000000000000 --- a/arch/frv/include/uapi/asm/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __FRV_AUXVEC_H -#define __FRV_AUXVEC_H - -#endif diff --git a/arch/frv/include/uapi/asm/bitsperlong.h b/arch/frv/include/uapi/asm/bitsperlong.h deleted file mode 100644 index 76da34b10f59..000000000000 --- a/arch/frv/include/uapi/asm/bitsperlong.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/bitsperlong.h> diff --git a/arch/frv/include/uapi/asm/byteorder.h b/arch/frv/include/uapi/asm/byteorder.h deleted file mode 100644 index a46f6472acdc..000000000000 --- a/arch/frv/include/uapi/asm/byteorder.h +++ /dev/null @@ -1,7 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_BYTEORDER_H -#define _ASM_BYTEORDER_H - -#include <linux/byteorder/big_endian.h> - -#endif /* _ASM_BYTEORDER_H */ diff --git a/arch/frv/include/uapi/asm/errno.h b/arch/frv/include/uapi/asm/errno.h deleted file mode 100644 index c5b82f2f2970..000000000000 --- a/arch/frv/include/uapi/asm/errno.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_ERRNO_H -#define _ASM_ERRNO_H - -#include <asm-generic/errno.h> - -#endif /* _ASM_ERRNO_H */ - diff --git a/arch/frv/include/uapi/asm/fcntl.h b/arch/frv/include/uapi/asm/fcntl.h deleted file mode 100644 index a77648c505d1..000000000000 --- a/arch/frv/include/uapi/asm/fcntl.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/fcntl.h> diff --git a/arch/frv/include/uapi/asm/ioctl.h b/arch/frv/include/uapi/asm/ioctl.h deleted file mode 100644 index b809c4566e5f..000000000000 --- a/arch/frv/include/uapi/asm/ioctl.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/ioctl.h> diff --git a/arch/frv/include/uapi/asm/ioctls.h b/arch/frv/include/uapi/asm/ioctls.h deleted file mode 100644 index dd9f5eb9feda..000000000000 --- a/arch/frv/include/uapi/asm/ioctls.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef __ASM_IOCTLS_H__ -#define __ASM_IOCTLS_H__ - -#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ -#define FIOQSIZE 0x545E - -#include <asm-generic/ioctls.h> - -#endif /* __ASM_IOCTLS_H__ */ - diff --git a/arch/frv/include/uapi/asm/ipcbuf.h b/arch/frv/include/uapi/asm/ipcbuf.h deleted file mode 100644 index 90d6445a14df..000000000000 --- a/arch/frv/include/uapi/asm/ipcbuf.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/ipcbuf.h> diff --git a/arch/frv/include/uapi/asm/kvm_para.h b/arch/frv/include/uapi/asm/kvm_para.h deleted file mode 100644 index baacc4996d18..000000000000 --- a/arch/frv/include/uapi/asm/kvm_para.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/kvm_para.h> diff --git a/arch/frv/include/uapi/asm/mman.h b/arch/frv/include/uapi/asm/mman.h deleted file mode 100644 index 306fc0460b80..000000000000 --- a/arch/frv/include/uapi/asm/mman.h +++ /dev/null @@ -1,2 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#include <asm-generic/mman.h> diff --git a/arch/frv/include/uapi/asm/msgbuf.h b/arch/frv/include/uapi/asm/msgbuf.h deleted file mode 100644 index 156c81bb46d7..000000000000 --- a/arch/frv/include/uapi/asm/msgbuf.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_MSGBUF_H -#define _ASM_MSGBUF_H - -/* - * The msqid64_ds structure for FR-V architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASM_MSGBUF_H */ - diff --git a/arch/frv/include/uapi/asm/param.h b/arch/frv/include/uapi/asm/param.h deleted file mode 100644 index d3e0168d8937..000000000000 --- a/arch/frv/include/uapi/asm/param.h +++ /dev/null @@ -1,9 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_PARAM_H -#define _ASM_PARAM_H - -#define EXEC_PAGESIZE 16384 - -#include <asm-generic/param.h> - -#endif /* _ASM_PARAM_H */ diff --git a/arch/frv/include/uapi/asm/poll.h b/arch/frv/include/uapi/asm/poll.h deleted file mode 100644 index f55b45f475ec..000000000000 --- a/arch/frv/include/uapi/asm/poll.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_POLL_H -#define _ASM_POLL_H - -#define POLLWRNORM POLLOUT -#define POLLWRBAND 256 - -#include <asm-generic/poll.h> -#undef POLLREMOVE - -#endif diff --git a/arch/frv/include/uapi/asm/posix_types.h b/arch/frv/include/uapi/asm/posix_types.h deleted file mode 100644 index 2995777227b3..000000000000 --- a/arch/frv/include/uapi/asm/posix_types.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_POSIX_TYPES_H -#define _ASM_POSIX_TYPES_H - -/* - * This file is generally used by user-level software, so you need to - * be a little careful about namespace pollution etc. Also, we cannot - * assume GCC is being used. - */ - -typedef unsigned short __kernel_mode_t; -#define __kernel_mode_t __kernel_mode_t - -typedef unsigned short __kernel_ipc_pid_t; -#define __kernel_ipc_pid_t __kernel_ipc_pid_t - -typedef unsigned short __kernel_uid_t; -typedef unsigned short __kernel_gid_t; -#define __kernel_uid_t __kernel_uid_t - -typedef unsigned short __kernel_old_dev_t; -#define __kernel_old_dev_t __kernel_old_dev_t - -#include <asm-generic/posix_types.h> - -#endif - diff --git a/arch/frv/include/uapi/asm/ptrace.h b/arch/frv/include/uapi/asm/ptrace.h deleted file mode 100644 index f1d2f652d083..000000000000 --- a/arch/frv/include/uapi/asm/ptrace.h +++ /dev/null @@ -1,61 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* ptrace.h: ptrace() relevant definitions - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _UAPI_ASM_PTRACE_H -#define _UAPI_ASM_PTRACE_H - -#include <asm/registers.h> - - -#define PT_PSR 0 -#define PT_ISR 1 -#define PT_CCR 2 -#define PT_CCCR 3 -#define PT_LR 4 -#define PT_LCR 5 -#define PT_PC 6 - -#define PT__STATUS 7 /* exception status */ -#define PT_SYSCALLNO 8 /* syscall number or -1 */ -#define PT_ORIG_GR8 9 /* saved GR8 for signal handling */ -#define PT_GNER0 10 -#define PT_GNER1 11 -#define PT_IACC0H 12 -#define PT_IACC0L 13 - -#define PT_GR(j) ( 14 + (j)) /* GRj for 0<=j<=63 */ -#define PT_FR(j) ( 78 + (j)) /* FRj for 0<=j<=63 */ -#define PT_FNER(j) (142 + (j)) /* FNERj for 0<=j<=1 */ -#define PT_MSR(j) (144 + (j)) /* MSRj for 0<=j<=2 */ -#define PT_ACC(j) (146 + (j)) /* ACCj for 0<=j<=7 */ -#define PT_ACCG(jklm) (154 + (jklm)) /* ACCGjklm for 0<=jklm<=1 (reads four regs per slot) */ -#define PT_FSR(j) (156 + (j)) /* FSRj for 0<=j<=0 */ -#define PT__GPEND 78 -#define PT__END 157 - -#define PT_TBR PT_GR(0) -#define PT_SP PT_GR(1) -#define PT_FP PT_GR(2) -#define PT_PREV_FRAME PT_GR(28) /* previous exception frame pointer (old gr28 value) */ -#define PT_CURR_TASK PT_GR(29) /* current task */ - - -/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */ -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ - -#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ -#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ - -#endif /* _UAPI_ASM_PTRACE_H */ diff --git a/arch/frv/include/uapi/asm/registers.h b/arch/frv/include/uapi/asm/registers.h deleted file mode 100644 index 4caf09b6c193..000000000000 --- a/arch/frv/include/uapi/asm/registers.h +++ /dev/null @@ -1,233 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* registers.h: register frame declarations - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * notes: - * - * (1) that the members of all these structures are carefully aligned to permit - * usage of STD/STDF instructions - * - * (2) if you change these structures, you must change the code in - * arch/frvnommu/kernel/{break.S,entry.S,switch_to.S,gdb-stub.c} - * - * - * the kernel stack space block looks like this: - * - * +0x2000 +---------------------- - * | union { - * | struct frv_frame0 { - * | struct user_context { - * | struct user_int_regs - * | struct user_fpmedia_regs - * | } - * | struct frv_debug_regs - * | } - * | struct pt_regs [user exception] - * | } - * +---------------------- <-- __kernel_frame0_ptr (maybe GR28) - * | - * | kernel stack - * | - * |...................... - * | struct pt_regs [kernel exception] - * |...................... <-- __kernel_frame0_ptr (maybe GR28) - * | - * | kernel stack - * | - * |...................... <-- stack pointer (GR1) - * | - * | unused stack space - * | - * +---------------------- - * | struct thread_info - * +0x0000 +---------------------- <-- __current_thread_info (GR15); - * - * note that GR28 points to the current exception frame - */ - -#ifndef _ASM_REGISTERS_H -#define _ASM_REGISTERS_H - -#ifndef __ASSEMBLY__ -#define __OFFSET(X,N) ((X)+(N)*4) -#define __OFFSETC(X,N) xxxxxxxxxxxxxxxxxxxxxxxx -#else -#define __OFFSET(X,N) ((X)+(N)*4) -#define __OFFSETC(X,N) ((X)+(N)) -#endif - -/*****************************************************************************/ -/* - * Exception/Interrupt frame - * - held on kernel stack - * - 8-byte aligned on stack (old SP is saved in frame) - * - GR0 is fixed 0, so we don't save it - */ -#ifndef __ASSEMBLY__ - -struct pt_regs { - unsigned long psr; /* Processor Status Register */ - unsigned long isr; /* Integer Status Register */ - unsigned long ccr; /* Condition Code Register */ - unsigned long cccr; /* Condition Code for Conditional Insns Register */ - unsigned long lr; /* Link Register */ - unsigned long lcr; /* Loop Count Register */ - unsigned long pc; /* Program Counter Register */ - unsigned long __status; /* exception status */ - unsigned long syscallno; /* syscall number or -1 */ - unsigned long orig_gr8; /* original syscall arg #1 */ - unsigned long gner0; - unsigned long gner1; - unsigned long long iacc0; - unsigned long tbr; /* GR0 is fixed zero, so we use this for TBR */ - unsigned long sp; /* GR1: USP/KSP */ - unsigned long fp; /* GR2: FP */ - unsigned long gr3; - unsigned long gr4; - unsigned long gr5; - unsigned long gr6; - unsigned long gr7; /* syscall number */ - unsigned long gr8; /* 1st syscall param; syscall return */ - unsigned long gr9; /* 2nd syscall param */ - unsigned long gr10; /* 3rd syscall param */ - unsigned long gr11; /* 4th syscall param */ - unsigned long gr12; /* 5th syscall param */ - unsigned long gr13; /* 6th syscall param */ - unsigned long gr14; - unsigned long gr15; - unsigned long gr16; /* GP pointer */ - unsigned long gr17; /* small data */ - unsigned long gr18; /* PIC/PID */ - unsigned long gr19; - unsigned long gr20; - unsigned long gr21; - unsigned long gr22; - unsigned long gr23; - unsigned long gr24; - unsigned long gr25; - unsigned long gr26; - unsigned long gr27; - struct pt_regs *next_frame; /* GR28 - next exception frame */ - unsigned long gr29; /* GR29 - OS reserved */ - unsigned long gr30; /* GR30 - OS reserved */ - unsigned long gr31; /* GR31 - OS reserved */ -} __attribute__((aligned(8))); - -#endif - -#define REG__STATUS_STEP 0x00000001 /* - reenable single stepping on return */ -#define REG__STATUS_STEPPED 0x00000002 /* - single step caused exception */ -#define REG__STATUS_BROKE 0x00000004 /* - BREAK insn caused exception */ -#define REG__STATUS_SYSC_ENTRY 0x40000000 /* - T on syscall entry (ptrace.c only) */ -#define REG__STATUS_SYSC_EXIT 0x80000000 /* - T on syscall exit (ptrace.c only) */ - -#define REG_GR(R) __OFFSET(REG_GR0, (R)) - -#define REG_SP REG_GR(1) -#define REG_FP REG_GR(2) -#define REG_PREV_FRAME REG_GR(28) /* previous exception frame pointer (old gr28 value) */ -#define REG_CURR_TASK REG_GR(29) /* current task */ - -/*****************************************************************************/ -/* - * debugging registers - */ -#ifndef __ASSEMBLY__ - -struct frv_debug_regs -{ - unsigned long dcr; - unsigned long ibar[4] __attribute__((aligned(8))); - unsigned long dbar[4] __attribute__((aligned(8))); - unsigned long dbdr[4][4] __attribute__((aligned(8))); - unsigned long dbmr[4][4] __attribute__((aligned(8))); -} __attribute__((aligned(8))); - -#endif - -/*****************************************************************************/ -/* - * userspace registers - */ -#ifndef __ASSEMBLY__ - -struct user_int_regs -{ - /* integer registers - * - up to gr[31] mirror pt_regs - * - total size must be multiple of 8 bytes - */ - unsigned long psr; /* Processor Status Register */ - unsigned long isr; /* Integer Status Register */ - unsigned long ccr; /* Condition Code Register */ - unsigned long cccr; /* Condition Code for Conditional Insns Register */ - unsigned long lr; /* Link Register */ - unsigned long lcr; /* Loop Count Register */ - unsigned long pc; /* Program Counter Register */ - unsigned long __status; /* exception status */ - unsigned long syscallno; /* syscall number or -1 */ - unsigned long orig_gr8; /* original syscall arg #1 */ - unsigned long gner[2]; - unsigned long long iacc[1]; - - union { - unsigned long tbr; - unsigned long gr[64]; - }; -}; - -struct user_fpmedia_regs -{ - /* FP/Media registers */ - unsigned long fr[64]; - unsigned long fner[2]; - unsigned long msr[2]; - unsigned long acc[8]; - unsigned char accg[8]; - unsigned long fsr[1]; -}; - -struct user_context -{ - struct user_int_regs i; - struct user_fpmedia_regs f; - - /* we provide a context extension so that we can save the regs for CPUs that - * implement many more of Fujitsu's lavish register spec - */ - void *extension; -} __attribute__((aligned(8))); - -struct frv_frame0 { - union { - struct pt_regs regs; - struct user_context uc; - }; - - struct frv_debug_regs debug; - -} __attribute__((aligned(32))); - -#endif - -#define __INT_GR(R) __OFFSET(__INT_GR0, (R)) - -#define __FPMEDIA_FR(R) __OFFSET(__FPMEDIA_FR0, (R)) -#define __FPMEDIA_FNER(R) __OFFSET(__FPMEDIA_FNER0, (R)) -#define __FPMEDIA_MSR(R) __OFFSET(__FPMEDIA_MSR0, (R)) -#define __FPMEDIA_ACC(R) __OFFSET(__FPMEDIA_ACC0, (R)) -#define __FPMEDIA_ACCG(R) __OFFSETC(__FPMEDIA_ACCG0, (R)) -#define __FPMEDIA_FSR(R) __OFFSET(__FPMEDIA_FSR0, (R)) - -#define __THREAD_GR(R) __OFFSET(__THREAD_GR16, (R) - 16) - -#endif /* _ASM_REGISTERS_H */ diff --git a/arch/frv/include/uapi/asm/resource.h b/arch/frv/include/uapi/asm/resource.h deleted file mode 100644 index 2100305f9b3e..000000000000 --- a/arch/frv/include/uapi/asm/resource.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_RESOURCE_H -#define _ASM_RESOURCE_H - -#include <asm-generic/resource.h> - -#endif /* _ASM_RESOURCE_H */ - diff --git a/arch/frv/include/uapi/asm/sembuf.h b/arch/frv/include/uapi/asm/sembuf.h deleted file mode 100644 index d5477f95832b..000000000000 --- a/arch/frv/include/uapi/asm/sembuf.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_SEMBUF_H -#define _ASM_SEMBUF_H - -/* - * The semid64_ds structure for FR-V architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SEMBUF_H */ - diff --git a/arch/frv/include/uapi/asm/setup.h b/arch/frv/include/uapi/asm/setup.h deleted file mode 100644 index f54957047900..000000000000 --- a/arch/frv/include/uapi/asm/setup.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* setup.h: setup stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _UAPI_ASM_SETUP_H -#define _UAPI_ASM_SETUP_H - -#define COMMAND_LINE_SIZE 512 - - -#endif /* _UAPI_ASM_SETUP_H */ diff --git a/arch/frv/include/uapi/asm/shmbuf.h b/arch/frv/include/uapi/asm/shmbuf.h deleted file mode 100644 index 1de8f892e412..000000000000 --- a/arch/frv/include/uapi/asm/shmbuf.h +++ /dev/null @@ -1,44 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_SHMBUF_H -#define _ASM_SHMBUF_H - -/* - * The shmid64_ds structure for FR-V architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASM_SHMBUF_H */ - diff --git a/arch/frv/include/uapi/asm/sigcontext.h b/arch/frv/include/uapi/asm/sigcontext.h deleted file mode 100644 index 8fbb0b00afdd..000000000000 --- a/arch/frv/include/uapi/asm/sigcontext.h +++ /dev/null @@ -1,27 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* sigcontext.h: FRV signal context - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#ifndef _ASM_SIGCONTEXT_H -#define _ASM_SIGCONTEXT_H - -#include <asm/registers.h> - -/* - * Signal context structure - contains all info to do with the state - * before the signal handler was invoked. Note: only add new entries - * to the end of the structure. - */ -struct sigcontext { - struct user_context sc_context; - unsigned long sc_oldmask; /* old sigmask */ -} __attribute__((aligned(8))); - -#endif diff --git a/arch/frv/include/uapi/asm/signal.h b/arch/frv/include/uapi/asm/signal.h deleted file mode 100644 index 603bb796cf46..000000000000 --- a/arch/frv/include/uapi/asm/signal.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI_ASM_SIGNAL_H -#define _UAPI_ASM_SIGNAL_H - -#include <linux/types.h> - -#ifndef __KERNEL__ -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* !__KERNEL__ */ - -#define SA_RESTORER 0x04000000 /* to get struct sigaction correct */ - -#include <asm-generic/signal.h> - -#ifndef __KERNEL__ -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -#endif /* _UAPI_ASM_SIGNAL_H */ diff --git a/arch/frv/include/uapi/asm/socket.h b/arch/frv/include/uapi/asm/socket.h deleted file mode 100644 index 9168e78fa32a..000000000000 --- a/arch/frv/include/uapi/asm/socket.h +++ /dev/null @@ -1,109 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -#define SO_REUSEPORT 15 -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 -#define SO_GET_FILTER SO_ATTACH_FILTER - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#define SO_LOCK_FILTER 44 - -#define SO_SELECT_ERR_QUEUE 45 - -#define SO_BUSY_POLL 46 - -#define SO_MAX_PACING_RATE 47 - -#define SO_BPF_EXTENSIONS 48 - -#define SO_INCOMING_CPU 49 - -#define SO_ATTACH_BPF 50 -#define SO_DETACH_BPF SO_DETACH_FILTER - -#define SO_ATTACH_REUSEPORT_CBPF 51 -#define SO_ATTACH_REUSEPORT_EBPF 52 - -#define SO_CNX_ADVICE 53 - -#define SCM_TIMESTAMPING_OPT_STATS 54 - -#define SO_MEMINFO 55 - -#define SO_INCOMING_NAPI_ID 56 - -#define SO_COOKIE 57 - -#define SCM_TIMESTAMPING_PKTINFO 58 - -#define SO_PEERGROUPS 59 - -#define SO_ZEROCOPY 60 - -#endif /* _ASM_SOCKET_H */ - diff --git a/arch/frv/include/uapi/asm/sockios.h b/arch/frv/include/uapi/asm/sockios.h deleted file mode 100644 index 2f62caf1ce84..000000000000 --- a/arch/frv/include/uapi/asm/sockios.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_SOCKIOS__ -#define _ASM_SOCKIOS__ - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif /* _ASM_SOCKIOS__ */ - diff --git a/arch/frv/include/uapi/asm/stat.h b/arch/frv/include/uapi/asm/stat.h deleted file mode 100644 index 0ff9fab915a4..000000000000 --- a/arch/frv/include/uapi/asm/stat.h +++ /dev/null @@ -1,101 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_STAT_H -#define _ASM_STAT_H - -struct __old_kernel_stat { - unsigned short st_dev; - unsigned short st_ino; - unsigned short st_mode; - unsigned short st_nlink; - unsigned short st_uid; - unsigned short st_gid; - unsigned short st_rdev; - unsigned long st_size; - unsigned long st_atime; - unsigned long st_mtime; - unsigned long st_ctime; -}; - -/* This matches struct stat in uClibc/glibc. */ -struct stat { - unsigned char __pad1[6]; - unsigned short st_dev; - - unsigned long __pad2; - unsigned long st_ino; - - unsigned short __pad3; - unsigned short st_mode; - unsigned short __pad4; - unsigned short st_nlink; - - unsigned short __pad5; - unsigned short st_uid; - unsigned short __pad6; - unsigned short st_gid; - - unsigned char __pad7[6]; - unsigned short st_rdev; - - unsigned long __pad8; - unsigned long st_size; - - unsigned long __pad9; /* align 64-bit st_blocks to 2-word */ - unsigned long st_blksize; - - unsigned long __pad10; /* future possible st_blocks high bits */ - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long __unused1; - unsigned long st_atime; - - unsigned long __unused2; - unsigned long st_mtime; - - unsigned long __unused3; - unsigned long st_ctime; - - unsigned long long __unused4; -}; - -/* This matches struct stat64 in uClibc/glibc. The layout is exactly - the same as that of struct stat above, with 64-bit types taking up - space that was formerly used by padding. stat syscalls are still - different from stat64, though, in that the former tests for - overflow. */ -struct stat64 { - unsigned char __pad1[6]; - unsigned short st_dev; - - unsigned long long st_ino; - - unsigned int st_mode; - unsigned int st_nlink; - - unsigned long st_uid; - unsigned long st_gid; - - unsigned char __pad2[6]; - unsigned short st_rdev; - - long long st_size; - - unsigned long __pad3; /* align 64-bit st_blocks to 2-word */ - unsigned long st_blksize; - - unsigned long __pad4; /* future possible st_blocks high bits */ - unsigned long st_blocks; /* Number 512-byte blocks allocated. */ - - unsigned long st_atime_nsec; - unsigned long st_atime; - - unsigned int st_mtime_nsec; - unsigned long st_mtime; - - unsigned long st_ctime_nsec; - unsigned long st_ctime; - - unsigned long long __unused4; -}; - -#endif /* _ASM_STAT_H */ diff --git a/arch/frv/include/uapi/asm/statfs.h b/arch/frv/include/uapi/asm/statfs.h deleted file mode 100644 index 2a378cbff07f..000000000000 --- a/arch/frv/include/uapi/asm/statfs.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_STATFS_H -#define _ASM_STATFS_H - -#include <asm-generic/statfs.h> - -#endif /* _ASM_STATFS_H */ - diff --git a/arch/frv/include/uapi/asm/swab.h b/arch/frv/include/uapi/asm/swab.h deleted file mode 100644 index c78257d172e5..000000000000 --- a/arch/frv/include/uapi/asm/swab.h +++ /dev/null @@ -1,11 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_SWAB_H -#define _ASM_SWAB_H - -#include <linux/types.h> - -#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#endif /* _ASM_SWAB_H */ diff --git a/arch/frv/include/uapi/asm/termbits.h b/arch/frv/include/uapi/asm/termbits.h deleted file mode 100644 index b1dcd8d0ff78..000000000000 --- a/arch/frv/include/uapi/asm/termbits.h +++ /dev/null @@ -1,204 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _ASM_TERMBITS_H__ -#define _ASM_TERMBITS_H__ - -#include <linux/posix_types.h> - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* Input baud rate */ -#define CTVB 004000000000 /* VisioBraille Terminal flow control */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* _ASM_TERMBITS_H__ */ - diff --git a/arch/frv/include/uapi/asm/termios.h b/arch/frv/include/uapi/asm/termios.h deleted file mode 100644 index ae35bedae6a2..000000000000 --- a/arch/frv/include/uapi/asm/termios.h +++ /dev/null @@ -1,47 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI_ASM_TERMIOS_H -#define _UAPI_ASM_TERMIOS_H - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -#define TIOCM_MODEM_BITS TIOCM_OUT2 /* IRDA support */ - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - - -#endif /* _UAPI_ASM_TERMIOS_H */ diff --git a/arch/frv/include/uapi/asm/types.h b/arch/frv/include/uapi/asm/types.h deleted file mode 100644 index db74ad9ba6c0..000000000000 --- a/arch/frv/include/uapi/asm/types.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */ -/* types.h: FRV types - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <asm-generic/int-ll64.h> diff --git a/arch/frv/include/uapi/asm/unistd.h b/arch/frv/include/uapi/asm/unistd.h deleted file mode 100644 index 4b46acaf832b..000000000000 --- a/arch/frv/include/uapi/asm/unistd.h +++ /dev/null @@ -1,349 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _UAPI_ASM_UNISTD_H_ -#define _UAPI_ASM_UNISTD_H_ - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall 0 -#define __NR_exit 1 -#define __NR_fork 2 -#define __NR_read 3 -#define __NR_write 4 -#define __NR_open 5 -#define __NR_close 6 -#define __NR_waitpid 7 -#define __NR_creat 8 -#define __NR_link 9 -#define __NR_unlink 10 -#define __NR_execve 11 -#define __NR_chdir 12 -#define __NR_time 13 -#define __NR_mknod 14 -#define __NR_chmod 15 -#define __NR_lchown 16 -#define __NR_break 17 -#define __NR_oldstat 18 -#define __NR_lseek 19 -#define __NR_getpid 20 -#define __NR_mount 21 -#define __NR_umount 22 -#define __NR_setuid 23 -#define __NR_getuid 24 -#define __NR_stime 25 -#define __NR_ptrace 26 -#define __NR_alarm 27 -#define __NR_oldfstat 28 -#define __NR_pause 29 -#define __NR_utime 30 -#define __NR_stty 31 -#define __NR_gtty 32 -#define __NR_access 33 -#define __NR_nice 34 -#define __NR_ftime 35 -#define __NR_sync 36 -#define __NR_kill 37 -#define __NR_rename 38 -#define __NR_mkdir 39 -#define __NR_rmdir 40 -#define __NR_dup 41 -#define __NR_pipe 42 -#define __NR_times 43 -#define __NR_prof 44 -#define __NR_brk 45 -#define __NR_setgid 46 -#define __NR_getgid 47 -#define __NR_signal 48 -#define __NR_geteuid 49 -#define __NR_getegid 50 -#define __NR_acct 51 -#define __NR_umount2 52 -#define __NR_lock 53 -#define __NR_ioctl 54 -#define __NR_fcntl 55 -#define __NR_mpx 56 -#define __NR_setpgid 57 -#define __NR_ulimit 58 -// #define __NR_oldolduname /* 59 */ obsolete -#define __NR_umask 60 -#define __NR_chroot 61 -#define __NR_ustat 62 -#define __NR_dup2 63 -#define __NR_getppid 64 -#define __NR_getpgrp 65 -#define __NR_setsid 66 -#define __NR_sigaction 67 -#define __NR_sgetmask 68 -#define __NR_ssetmask 69 -#define __NR_setreuid 70 -#define __NR_setregid 71 -#define __NR_sigsuspend 72 -#define __NR_sigpending 73 -#define __NR_sethostname 74 -#define __NR_setrlimit 75 -#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ -#define __NR_getrusage 77 -#define __NR_gettimeofday 78 -#define __NR_settimeofday 79 -#define __NR_getgroups 80 -#define __NR_setgroups 81 -#define __NR_select 82 -#define __NR_symlink 83 -#define __NR_oldlstat 84 -#define __NR_readlink 85 -#define __NR_uselib 86 -#define __NR_swapon 87 -#define __NR_reboot 88 -#define __NR_readdir 89 -// #define __NR_mmap 90 /* obsolete - not implemented */ -#define __NR_munmap 91 -#define __NR_truncate 92 -#define __NR_ftruncate 93 -#define __NR_fchmod 94 -#define __NR_fchown 95 -#define __NR_getpriority 96 -#define __NR_setpriority 97 -// #define __NR_profil /* 98 */ obsolete -#define __NR_statfs 99 -#define __NR_fstatfs 100 -// #define __NR_ioperm /* 101 */ not supported -#define __NR_socketcall 102 -#define __NR_syslog 103 -#define __NR_setitimer 104 -#define __NR_getitimer 105 -#define __NR_stat 106 -#define __NR_lstat 107 -#define __NR_fstat 108 -// #define __NR_olduname /* 109 */ obsolete -// #define __NR_iopl /* 110 */ not supported -#define __NR_vhangup 111 -// #define __NR_idle /* 112 */ Obsolete -// #define __NR_vm86old /* 113 */ not supported -#define __NR_wait4 114 -#define __NR_swapoff 115 -#define __NR_sysinfo 116 -#define __NR_ipc 117 -#define __NR_fsync 118 -#define __NR_sigreturn 119 -#define __NR_clone 120 -#define __NR_setdomainname 121 -#define __NR_uname 122 -// #define __NR_modify_ldt /* 123 */ not supported -#define __NR_cacheflush 123 -#define __NR_adjtimex 124 -#define __NR_mprotect 125 -#define __NR_sigprocmask 126 -#define __NR_create_module 127 -#define __NR_init_module 128 -#define __NR_delete_module 129 -#define __NR_get_kernel_syms 130 -#define __NR_quotactl 131 -#define __NR_getpgid 132 -#define __NR_fchdir 133 -#define __NR_bdflush 134 -#define __NR_sysfs 135 -#define __NR_personality 136 -#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ -#define __NR_setfsuid 138 -#define __NR_setfsgid 139 -#define __NR__llseek 140 -#define __NR_getdents 141 -#define __NR__newselect 142 -#define __NR_flock 143 -#define __NR_msync 144 -#define __NR_readv 145 -#define __NR_writev 146 -#define __NR_getsid 147 -#define __NR_fdatasync 148 -#define __NR__sysctl 149 -#define __NR_mlock 150 -#define __NR_munlock 151 -#define __NR_mlockall 152 -#define __NR_munlockall 153 -#define __NR_sched_setparam 154 -#define __NR_sched_getparam 155 -#define __NR_sched_setscheduler 156 -#define __NR_sched_getscheduler 157 -#define __NR_sched_yield 158 -#define __NR_sched_get_priority_max 159 -#define __NR_sched_get_priority_min 160 -#define __NR_sched_rr_get_interval 161 -#define __NR_nanosleep 162 -#define __NR_mremap 163 -#define __NR_setresuid 164 -#define __NR_getresuid 165 -// #define __NR_vm86 /* 166 */ not supported -#define __NR_query_module 167 -#define __NR_poll 168 -#define __NR_nfsservctl 169 -#define __NR_setresgid 170 -#define __NR_getresgid 171 -#define __NR_prctl 172 -#define __NR_rt_sigreturn 173 -#define __NR_rt_sigaction 174 -#define __NR_rt_sigprocmask 175 -#define __NR_rt_sigpending 176 -#define __NR_rt_sigtimedwait 177 -#define __NR_rt_sigqueueinfo 178 -#define __NR_rt_sigsuspend 179 -#define __NR_pread64 180 -#define __NR_pwrite64 181 -#define __NR_chown 182 -#define __NR_getcwd 183 -#define __NR_capget 184 -#define __NR_capset 185 -#define __NR_sigaltstack 186 -#define __NR_sendfile 187 -#define __NR_getpmsg 188 /* some people actually want streams */ -#define __NR_putpmsg 189 /* some people actually want streams */ -#define __NR_vfork 190 -#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ -#define __NR_mmap2 192 -#define __NR_truncate64 193 -#define __NR_ftruncate64 194 -#define __NR_stat64 195 -#define __NR_lstat64 196 -#define __NR_fstat64 197 -#define __NR_lchown32 198 -#define __NR_getuid32 199 -#define __NR_getgid32 200 -#define __NR_geteuid32 201 -#define __NR_getegid32 202 -#define __NR_setreuid32 203 -#define __NR_setregid32 204 -#define __NR_getgroups32 205 -#define __NR_setgroups32 206 -#define __NR_fchown32 207 -#define __NR_setresuid32 208 -#define __NR_getresuid32 209 -#define __NR_setresgid32 210 -#define __NR_getresgid32 211 -#define __NR_chown32 212 -#define __NR_setuid32 213 -#define __NR_setgid32 214 -#define __NR_setfsuid32 215 -#define __NR_setfsgid32 216 -#define __NR_pivot_root 217 -#define __NR_mincore 218 -#define __NR_madvise 219 - -#define __NR_getdents64 220 -#define __NR_fcntl64 221 -#define __NR_security 223 /* syscall for security modules */ -#define __NR_gettid 224 -#define __NR_readahead 225 -#define __NR_setxattr 226 -#define __NR_lsetxattr 227 -#define __NR_fsetxattr 228 -#define __NR_getxattr 229 -#define __NR_lgetxattr 230 -#define __NR_fgetxattr 231 -#define __NR_listxattr 232 -#define __NR_llistxattr 233 -#define __NR_flistxattr 234 -#define __NR_removexattr 235 -#define __NR_lremovexattr 236 -#define __NR_fremovexattr 237 -#define __NR_tkill 238 -#define __NR_sendfile64 239 -#define __NR_futex 240 -#define __NR_sched_setaffinity 241 -#define __NR_sched_getaffinity 242 -#define __NR_set_thread_area 243 -#define __NR_get_thread_area 244 -#define __NR_io_setup 245 -#define __NR_io_destroy 246 -#define __NR_io_getevents 247 -#define __NR_io_submit 248 -#define __NR_io_cancel 249 -#define __NR_fadvise64 250 - -#define __NR_exit_group 252 -#define __NR_lookup_dcookie 253 -#define __NR_epoll_create 254 -#define __NR_epoll_ctl 255 -#define __NR_epoll_wait 256 -#define __NR_remap_file_pages 257 -#define __NR_set_tid_address 258 -#define __NR_timer_create 259 -#define __NR_timer_settime (__NR_timer_create+1) -#define __NR_timer_gettime (__NR_timer_create+2) -#define __NR_timer_getoverrun (__NR_timer_create+3) -#define __NR_timer_delete (__NR_timer_create+4) -#define __NR_clock_settime (__NR_timer_create+5) -#define __NR_clock_gettime (__NR_timer_create+6) -#define __NR_clock_getres (__NR_timer_create+7) -#define __NR_clock_nanosleep (__NR_timer_create+8) -#define __NR_statfs64 268 -#define __NR_fstatfs64 269 -#define __NR_tgkill 270 -#define __NR_utimes 271 -#define __NR_fadvise64_64 272 -#define __NR_vserver 273 -#define __NR_mbind 274 -#define __NR_get_mempolicy 275 -#define __NR_set_mempolicy 276 -#define __NR_mq_open 277 -#define __NR_mq_unlink (__NR_mq_open+1) -#define __NR_mq_timedsend (__NR_mq_open+2) -#define __NR_mq_timedreceive (__NR_mq_open+3) -#define __NR_mq_notify (__NR_mq_open+4) -#define __NR_mq_getsetattr (__NR_mq_open+5) -#define __NR_kexec_load 283 -#define __NR_waitid 284 -/* #define __NR_sys_setaltroot 285 */ -#define __NR_add_key 286 -#define __NR_request_key 287 -#define __NR_keyctl 288 -#define __NR_ioprio_set 289 -#define __NR_ioprio_get 290 -#define __NR_inotify_init 291 -#define __NR_inotify_add_watch 292 -#define __NR_inotify_rm_watch 293 -#define __NR_migrate_pages 294 -#define __NR_openat 295 -#define __NR_mkdirat 296 -#define __NR_mknodat 297 -#define __NR_fchownat 298 -#define __NR_futimesat 299 -#define __NR_fstatat64 300 -#define __NR_unlinkat 301 -#define __NR_renameat 302 -#define __NR_linkat 303 -#define __NR_symlinkat 304 -#define __NR_readlinkat 305 -#define __NR_fchmodat 306 -#define __NR_faccessat 307 -#define __NR_pselect6 308 -#define __NR_ppoll 309 -#define __NR_unshare 310 -#define __NR_set_robust_list 311 -#define __NR_get_robust_list 312 -#define __NR_splice 313 -#define __NR_sync_file_range 314 -#define __NR_tee 315 -#define __NR_vmsplice 316 -#define __NR_move_pages 317 -#define __NR_getcpu 318 -#define __NR_epoll_pwait 319 -#define __NR_utimensat 320 -#define __NR_signalfd 321 -#define __NR_timerfd_create 322 -#define __NR_eventfd 323 -#define __NR_fallocate 324 -#define __NR_timerfd_settime 325 -#define __NR_timerfd_gettime 326 -#define __NR_signalfd4 327 -#define __NR_eventfd2 328 -#define __NR_epoll_create1 329 -#define __NR_dup3 330 -#define __NR_pipe2 331 -#define __NR_inotify_init1 332 -#define __NR_preadv 333 -#define __NR_pwritev 334 -#define __NR_rt_tgsigqueueinfo 335 -#define __NR_perf_event_open 336 -#define __NR_setns 337 - -#endif /* _UAPI_ASM_UNISTD_H_ */ diff --git a/arch/frv/kernel/.gitignore b/arch/frv/kernel/.gitignore deleted file mode 100644 index c5f676c3c224..000000000000 --- a/arch/frv/kernel/.gitignore +++ /dev/null @@ -1 +0,0 @@ -vmlinux.lds diff --git a/arch/frv/kernel/Makefile b/arch/frv/kernel/Makefile deleted file mode 100644 index 216ddf30c3c1..000000000000 --- a/arch/frv/kernel/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux kernel. -# - -heads-y := head-uc-fr401.o head-uc-fr451.o head-uc-fr555.o -heads-$(CONFIG_MMU) := head-mmu-fr451.o - -extra-y:= head.o vmlinux.lds - -obj-y := $(heads-y) entry.o entry-table.o break.o switch_to.o \ - process.o traps.o ptrace.o signal.o dma.o \ - sys_frv.o time.o setup.o frv_ksyms.o \ - debug-stub.o irq.o sleep.o uaccess.o - -obj-$(CONFIG_GDBSTUB) += gdb-stub.o gdb-io.o - -obj-$(CONFIG_MB93091_VDK) += irq-mb93091.o -obj-$(CONFIG_PM) += pm.o cmode.o -obj-$(CONFIG_MB93093_PDK) += pm-mb93093.o -obj-$(CONFIG_FUJITSU_MB93493) += irq-mb93493.o -obj-$(CONFIG_SYSCTL) += sysctl.o -obj-$(CONFIG_FUTEX) += futex.o -obj-$(CONFIG_MODULES) += module.o diff --git a/arch/frv/kernel/asm-offsets.c b/arch/frv/kernel/asm-offsets.c deleted file mode 100644 index 0a468e9b51ad..000000000000 --- a/arch/frv/kernel/asm-offsets.c +++ /dev/null @@ -1,96 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Generate definitions needed by assembly language modules. - * This code generates raw asm output which is post-processed - * to extract and format the required data. - */ - -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/personality.h> -#include <linux/kbuild.h> -#include <asm/registers.h> -#include <asm/ucontext.h> -#include <asm/processor.h> -#include <asm/thread_info.h> -#include <asm/gdb-stub.h> - -#define DEF_PTREG(sym, reg) OFFSET(sym, pt_regs, reg) -#define DEF_IREG(sym, reg) OFFSET(sym, user_context, reg) -#define DEF_FREG(sym, reg) OFFSET(sym, user_context, reg) -#define DEF_0REG(sym, reg) OFFSET(sym, frv_frame0, reg) - -void foo(void) -{ - /* offsets into the thread_info structure */ - OFFSET(TI_TASK, thread_info, task); - OFFSET(TI_FLAGS, thread_info, flags); - OFFSET(TI_STATUS, thread_info, status); - OFFSET(TI_CPU, thread_info, cpu); - OFFSET(TI_PREEMPT_COUNT, thread_info, preempt_count); - OFFSET(TI_ADDR_LIMIT, thread_info, addr_limit); - BLANK(); - - /* offsets into register file storage */ - DEF_PTREG(REG_PSR, psr); - DEF_PTREG(REG_ISR, isr); - DEF_PTREG(REG_CCR, ccr); - DEF_PTREG(REG_CCCR, cccr); - DEF_PTREG(REG_LR, lr); - DEF_PTREG(REG_LCR, lcr); - DEF_PTREG(REG_PC, pc); - DEF_PTREG(REG__STATUS, __status); - DEF_PTREG(REG_SYSCALLNO, syscallno); - DEF_PTREG(REG_ORIG_GR8, orig_gr8); - DEF_PTREG(REG_GNER0, gner0); - DEF_PTREG(REG_GNER1, gner1); - DEF_PTREG(REG_IACC0, iacc0); - DEF_PTREG(REG_TBR, tbr); - DEF_PTREG(REG_GR0, tbr); - DEFINE(REG__END, sizeof(struct pt_regs)); - BLANK(); - - DEF_0REG(REG_DCR, debug.dcr); - DEF_0REG(REG_IBAR0, debug.ibar[0]); - DEF_0REG(REG_DBAR0, debug.dbar[0]); - DEF_0REG(REG_DBDR00, debug.dbdr[0][0]); - DEF_0REG(REG_DBMR00, debug.dbmr[0][0]); - BLANK(); - - DEF_IREG(__INT_GR0, i.gr[0]); - DEF_FREG(__USER_FPMEDIA, f); - DEF_FREG(__FPMEDIA_FR0, f.fr[0]); - DEF_FREG(__FPMEDIA_FNER0, f.fner[0]); - DEF_FREG(__FPMEDIA_MSR0, f.msr[0]); - DEF_FREG(__FPMEDIA_ACC0, f.acc[0]); - DEF_FREG(__FPMEDIA_ACCG0, f.accg[0]); - DEF_FREG(__FPMEDIA_FSR0, f.fsr[0]); - BLANK(); - - DEFINE(NR_PT_REGS, sizeof(struct pt_regs) / 4); - DEFINE(NR_USER_INT_REGS, sizeof(struct user_int_regs) / 4); - DEFINE(NR_USER_FPMEDIA_REGS, sizeof(struct user_fpmedia_regs) / 4); - DEFINE(NR_USER_CONTEXT, sizeof(struct user_context) / 4); - DEFINE(FRV_FRAME0_SIZE, sizeof(struct frv_frame0)); - BLANK(); - - /* offsets into thread_struct */ - OFFSET(__THREAD_FRAME, thread_struct, frame); - OFFSET(__THREAD_CURR, thread_struct, curr); - OFFSET(__THREAD_SP, thread_struct, sp); - OFFSET(__THREAD_FP, thread_struct, fp); - OFFSET(__THREAD_LR, thread_struct, lr); - OFFSET(__THREAD_PC, thread_struct, pc); - OFFSET(__THREAD_GR16, thread_struct, gr[0]); - OFFSET(__THREAD_SCHED_LR, thread_struct, sched_lr); - OFFSET(__THREAD_FRAME0, thread_struct, frame0); - OFFSET(__THREAD_USER, thread_struct, user); - BLANK(); - - /* offsets into frv_debug_status */ - OFFSET(DEBUG_BPSR, frv_debug_status, bpsr); - OFFSET(DEBUG_DCR, frv_debug_status, dcr); - OFFSET(DEBUG_BRR, frv_debug_status, brr); - OFFSET(DEBUG_NMAR, frv_debug_status, nmar); - BLANK(); -} diff --git a/arch/frv/kernel/break.S b/arch/frv/kernel/break.S deleted file mode 100644 index cbb6958a3147..000000000000 --- a/arch/frv/kernel/break.S +++ /dev/null @@ -1,792 +0,0 @@ -/* break.S: Break interrupt handling (kept separate from entry.S) - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/linkage.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/ptrace.h> -#include <asm/thread_info.h> -#include <asm/spr-regs.h> - -#include <asm/errno.h> - -# -# the break handler has its own stack -# - .section .bss..stack - .globl __break_user_context - .balign THREAD_SIZE -__break_stack: - .space THREAD_SIZE - FRV_FRAME0_SIZE -__break_frame_0: - .space FRV_FRAME0_SIZE - -# -# miscellaneous variables -# - .section .bss -#ifdef CONFIG_MMU - .globl __break_tlb_miss_real_return_info -__break_tlb_miss_real_return_info: - .balign 8 - .space 2*4 /* saved PCSR, PSR for TLB-miss handler fixup */ -#endif - -__break_trace_through_exceptions: - .space 4 - -#define CS2_ECS1 0xe1200000 -#define CS2_USERLED 0x4 - -.macro LEDS val,reg -# sethi.p %hi(CS2_ECS1+CS2_USERLED),gr30 -# setlo %lo(CS2_ECS1+CS2_USERLED),gr30 -# setlos #~\val,\reg -# st \reg,@(gr30,gr0) -# setlos #0x5555,\reg -# sethi.p %hi(0xffc00100),gr30 -# setlo %lo(0xffc00100),gr30 -# sth \reg,@(gr30,gr0) -# membar -.endm - -############################################################################### -# -# entry point for Break Exceptions/Interrupts -# -############################################################################### - .section .text..break - .balign 4 - .globl __entry_break -__entry_break: -#ifdef CONFIG_MMU - movgs gr31,scr3 -#endif - LEDS 0x1001,gr31 - - sethi.p %hi(__break_frame_0),gr31 - setlo %lo(__break_frame_0),gr31 - - stdi gr2,@(gr31,#REG_GR(2)) - movsg ccr,gr3 - sti gr3,@(gr31,#REG_CCR) - - # catch the return from a TLB-miss handler that had single-step disabled - # traps will be enabled, so we have to do this now -#ifdef CONFIG_MMU - movsg bpcsr,gr3 - sethi.p %hi(__break_tlb_miss_return_breaks_here),gr2 - setlo %lo(__break_tlb_miss_return_breaks_here),gr2 - subcc gr2,gr3,gr0,icc0 - beq icc0,#2,__break_return_singlestep_tlbmiss -#endif - - # determine whether we have stepped through into an exception - # - we need to take special action to suspend h/w single stepping if we've done - # that, so that the gdbstub doesn't get bogged down endlessly stepping through - # external interrupt handling - movsg bpsr,gr3 - andicc gr3,#BPSR_BET,gr0,icc0 - bne icc0,#2,__break_maybe_userspace /* jump if PSR.ET was 1 */ - - LEDS 0x1003,gr2 - - movsg brr,gr3 - andicc gr3,#BRR_ST,gr0,icc0 - andicc.p gr3,#BRR_SB,gr0,icc1 - bne icc0,#2,__break_step /* jump if single-step caused break */ - beq icc1,#2,__break_continue /* jump if BREAK didn't cause break */ - - LEDS 0x1007,gr2 - - # handle special breaks - movsg bpcsr,gr3 - - sethi.p %hi(__entry_return_singlestep_breaks_here),gr2 - setlo %lo(__entry_return_singlestep_breaks_here),gr2 - subcc gr2,gr3,gr0,icc0 - beq icc0,#2,__break_return_singlestep - - bra __break_continue - - -############################################################################### -# -# handle BREAK instruction in kernel-mode exception epilogue -# -############################################################################### -__break_return_singlestep: - LEDS 0x100f,gr2 - - # special break insn requests single-stepping to be turned back on - # HERE RETT - # PSR.ET 0 0 - # PSR.PS old PSR.S ? - # PSR.S 1 1 - # BPSR.ET 0 1 (can't have caused orig excep otherwise) - # BPSR.BS 1 old PSR.S - movsg dcr,gr2 - sethi.p %hi(DCR_SE),gr3 - setlo %lo(DCR_SE),gr3 - or gr2,gr3,gr2 - movgs gr2,dcr - - movsg psr,gr2 - andi gr2,#PSR_PS,gr2 - slli gr2,#11,gr2 /* PSR.PS -> BPSR.BS */ - ori gr2,#BPSR_BET,gr2 /* 1 -> BPSR.BET */ - movgs gr2,bpsr - - # return to the invoker of the original kernel exception - movsg pcsr,gr2 - movgs gr2,bpcsr - - LEDS 0x101f,gr2 - - ldi @(gr31,#REG_CCR),gr3 - movgs gr3,ccr - lddi.p @(gr31,#REG_GR(2)),gr2 - xor gr31,gr31,gr31 - movgs gr0,brr -#ifdef CONFIG_MMU - movsg scr3,gr31 -#endif - rett #1 - -############################################################################### -# -# handle BREAK instruction in TLB-miss handler return path -# -############################################################################### -#ifdef CONFIG_MMU -__break_return_singlestep_tlbmiss: - LEDS 0x1100,gr2 - - sethi.p %hi(__break_tlb_miss_real_return_info),gr3 - setlo %lo(__break_tlb_miss_real_return_info),gr3 - lddi @(gr3,#0),gr2 - movgs gr2,pcsr - movgs gr3,psr - - bra __break_return_singlestep -#endif - - -############################################################################### -# -# handle single stepping into an exception prologue from kernel mode -# - we try and catch it whilst it is still in the main vector table -# - if we catch it there, we have to jump to the fixup handler -# - there is a fixup table that has a pointer for every 16b slot in the trap -# table -# -############################################################################### -__break_step: - LEDS 0x2003,gr2 - - # external interrupts seem to escape from the trap table before single - # step catches up with them - movsg bpcsr,gr2 - sethi.p %hi(__entry_kernel_external_interrupt),gr3 - setlo %lo(__entry_kernel_external_interrupt),gr3 - subcc.p gr2,gr3,gr0,icc0 - sethi %hi(__entry_uspace_external_interrupt),gr3 - setlo.p %lo(__entry_uspace_external_interrupt),gr3 - beq icc0,#2,__break_step_kernel_external_interrupt - subcc.p gr2,gr3,gr0,icc0 - sethi %hi(__entry_kernel_external_interrupt_virtually_disabled),gr3 - setlo.p %lo(__entry_kernel_external_interrupt_virtually_disabled),gr3 - beq icc0,#2,__break_step_uspace_external_interrupt - subcc.p gr2,gr3,gr0,icc0 - sethi %hi(__entry_kernel_external_interrupt_virtual_reenable),gr3 - setlo.p %lo(__entry_kernel_external_interrupt_virtual_reenable),gr3 - beq icc0,#2,__break_step_kernel_external_interrupt_virtually_disabled - subcc gr2,gr3,gr0,icc0 - beq icc0,#2,__break_step_kernel_external_interrupt_virtual_reenable - - LEDS 0x2007,gr2 - - # the two main vector tables are adjacent on one 8Kb slab - movsg bpcsr,gr2 - setlos #0xffffe000,gr3 - and gr2,gr3,gr2 - sethi.p %hi(__trap_tables),gr3 - setlo %lo(__trap_tables),gr3 - subcc gr2,gr3,gr0,icc0 - bne icc0,#2,__break_continue - - LEDS 0x200f,gr2 - - # skip workaround if so requested by GDB - sethi.p %hi(__break_trace_through_exceptions),gr3 - setlo %lo(__break_trace_through_exceptions),gr3 - ld @(gr3,gr0),gr3 - subcc gr3,gr0,gr0,icc0 - bne icc0,#0,__break_continue - - LEDS 0x201f,gr2 - - # access the fixup table - there's a 1:1 mapping between the slots in the trap tables and - # the slots in the trap fixup tables allowing us to simply divide the offset into the - # former by 4 to access the latter - sethi.p %hi(__trap_tables),gr3 - setlo %lo(__trap_tables),gr3 - movsg bpcsr,gr2 - sub gr2,gr3,gr2 - srli.p gr2,#2,gr2 - - sethi %hi(__trap_fixup_tables),gr3 - setlo.p %lo(__trap_fixup_tables),gr3 - andi gr2,#~3,gr2 - ld @(gr2,gr3),gr2 - jmpil @(gr2,#0) - -# step through an internal exception from kernel mode - .globl __break_step_kernel_softprog_interrupt -__break_step_kernel_softprog_interrupt: - sethi.p %hi(__entry_kernel_softprog_interrupt_reentry),gr3 - setlo %lo(__entry_kernel_softprog_interrupt_reentry),gr3 - bra __break_return_as_kernel_prologue - -# step through an external interrupt from kernel mode - .globl __break_step_kernel_external_interrupt -__break_step_kernel_external_interrupt: - # deal with virtual interrupt disablement - beq icc2,#0,__break_step_kernel_external_interrupt_virtually_disabled - - sethi.p %hi(__entry_kernel_external_interrupt_reentry),gr3 - setlo %lo(__entry_kernel_external_interrupt_reentry),gr3 - -__break_return_as_kernel_prologue: - LEDS 0x203f,gr2 - - movgs gr3,bpcsr - - # do the bit we had to skip -#ifdef CONFIG_MMU - movsg ear0,gr2 /* EAR0 can get clobbered by gdb-stub (ICI/ICEI) */ - movgs gr2,scr2 -#endif - - or.p sp,gr0,gr2 /* set up the stack pointer */ - subi sp,#REG__END,sp - sti.p gr2,@(sp,#REG_SP) - - setlos #REG__STATUS_STEP,gr2 - sti gr2,@(sp,#REG__STATUS) /* record single step status */ - - # cancel single-stepping mode - movsg dcr,gr2 - sethi.p %hi(~DCR_SE),gr3 - setlo %lo(~DCR_SE),gr3 - and gr2,gr3,gr2 - movgs gr2,dcr - - LEDS 0x207f,gr2 - - ldi @(gr31,#REG_CCR),gr3 - movgs gr3,ccr - lddi.p @(gr31,#REG_GR(2)),gr2 - xor gr31,gr31,gr31 - movgs gr0,brr -#ifdef CONFIG_MMU - movsg scr3,gr31 -#endif - rett #1 - -# we single-stepped into an interrupt handler whilst interrupts were merely virtually disabled -# need to really disable interrupts, set flag, fix up and return -__break_step_kernel_external_interrupt_virtually_disabled: - movsg psr,gr2 - andi gr2,#~PSR_PIL,gr2 - ori gr2,#PSR_PIL_14,gr2 /* debugging interrupts only */ - movgs gr2,psr - - ldi @(gr31,#REG_CCR),gr3 - movgs gr3,ccr - subcc.p gr0,gr0,gr0,icc2 /* leave Z set, clear C */ - - # exceptions must've been enabled and we must've been in supervisor mode - setlos BPSR_BET|BPSR_BS,gr3 - movgs gr3,bpsr - - # return to where the interrupt happened - movsg pcsr,gr2 - movgs gr2,bpcsr - - lddi.p @(gr31,#REG_GR(2)),gr2 - - xor gr31,gr31,gr31 - movgs gr0,brr -#ifdef CONFIG_MMU - movsg scr3,gr31 -#endif - rett #1 - -# we stepped through into the virtual interrupt reenablement trap -# -# we also want to single step anyway, but after fixing up so that we get an event on the -# instruction after the broken-into exception returns - .globl __break_step_kernel_external_interrupt_virtual_reenable -__break_step_kernel_external_interrupt_virtual_reenable: - movsg psr,gr2 - andi gr2,#~PSR_PIL,gr2 - movgs gr2,psr - - ldi @(gr31,#REG_CCR),gr3 - movgs gr3,ccr - subicc gr0,#1,gr0,icc2 /* clear Z, set C */ - - # save the adjusted ICC2 - movsg ccr,gr3 - sti gr3,@(gr31,#REG_CCR) - - # exceptions must've been enabled and we must've been in supervisor mode - setlos BPSR_BET|BPSR_BS,gr3 - movgs gr3,bpsr - - # return to where the trap happened - movsg pcsr,gr2 - movgs gr2,bpcsr - - # and then process the single step - bra __break_continue - -# step through an internal exception from uspace mode - .globl __break_step_uspace_softprog_interrupt -__break_step_uspace_softprog_interrupt: - sethi.p %hi(__entry_uspace_softprog_interrupt_reentry),gr3 - setlo %lo(__entry_uspace_softprog_interrupt_reentry),gr3 - bra __break_return_as_uspace_prologue - -# step through an external interrupt from kernel mode - .globl __break_step_uspace_external_interrupt -__break_step_uspace_external_interrupt: - sethi.p %hi(__entry_uspace_external_interrupt_reentry),gr3 - setlo %lo(__entry_uspace_external_interrupt_reentry),gr3 - -__break_return_as_uspace_prologue: - LEDS 0x20ff,gr2 - - movgs gr3,bpcsr - - # do the bit we had to skip - sethi.p %hi(__kernel_frame0_ptr),gr28 - setlo %lo(__kernel_frame0_ptr),gr28 - ldi.p @(gr28,#0),gr28 - - setlos #REG__STATUS_STEP,gr2 - sti gr2,@(gr28,#REG__STATUS) /* record single step status */ - - # cancel single-stepping mode - movsg dcr,gr2 - sethi.p %hi(~DCR_SE),gr3 - setlo %lo(~DCR_SE),gr3 - and gr2,gr3,gr2 - movgs gr2,dcr - - LEDS 0x20fe,gr2 - - ldi @(gr31,#REG_CCR),gr3 - movgs gr3,ccr - lddi.p @(gr31,#REG_GR(2)),gr2 - xor gr31,gr31,gr31 - movgs gr0,brr -#ifdef CONFIG_MMU - movsg scr3,gr31 -#endif - rett #1 - -#ifdef CONFIG_MMU -# step through an ITLB-miss handler from user mode - .globl __break_user_insn_tlb_miss -__break_user_insn_tlb_miss: - # we'll want to try the trap stub again - sethi.p %hi(__trap_user_insn_tlb_miss),gr2 - setlo %lo(__trap_user_insn_tlb_miss),gr2 - movgs gr2,bpcsr - -__break_tlb_miss_common: - LEDS 0x2101,gr2 - - # cancel single-stepping mode - movsg dcr,gr2 - sethi.p %hi(~DCR_SE),gr3 - setlo %lo(~DCR_SE),gr3 - and gr2,gr3,gr2 - movgs gr2,dcr - - # we'll swap the real return address for one with a BREAK insn so that we can re-enable - # single stepping on return - movsg pcsr,gr2 - sethi.p %hi(__break_tlb_miss_real_return_info),gr3 - setlo %lo(__break_tlb_miss_real_return_info),gr3 - sti gr2,@(gr3,#0) - - sethi.p %hi(__break_tlb_miss_return_break),gr2 - setlo %lo(__break_tlb_miss_return_break),gr2 - movgs gr2,pcsr - - # we also have to fudge PSR because the return BREAK is in kernel space and we want - # to get a BREAK fault not an access violation should the return be to userspace - movsg psr,gr2 - sti.p gr2,@(gr3,#4) - ori gr2,#PSR_PS,gr2 - movgs gr2,psr - - LEDS 0x2102,gr2 - - ldi @(gr31,#REG_CCR),gr3 - movgs gr3,ccr - lddi @(gr31,#REG_GR(2)),gr2 - movsg scr3,gr31 - movgs gr0,brr - rett #1 - -# step through a DTLB-miss handler from user mode - .globl __break_user_data_tlb_miss -__break_user_data_tlb_miss: - # we'll want to try the trap stub again - sethi.p %hi(__trap_user_data_tlb_miss),gr2 - setlo %lo(__trap_user_data_tlb_miss),gr2 - movgs gr2,bpcsr - bra __break_tlb_miss_common - -# step through an ITLB-miss handler from kernel mode - .globl __break_kernel_insn_tlb_miss -__break_kernel_insn_tlb_miss: - # we'll want to try the trap stub again - sethi.p %hi(__trap_kernel_insn_tlb_miss),gr2 - setlo %lo(__trap_kernel_insn_tlb_miss),gr2 - movgs gr2,bpcsr - bra __break_tlb_miss_common - -# step through a DTLB-miss handler from kernel mode - .globl __break_kernel_data_tlb_miss -__break_kernel_data_tlb_miss: - # we'll want to try the trap stub again - sethi.p %hi(__trap_kernel_data_tlb_miss),gr2 - setlo %lo(__trap_kernel_data_tlb_miss),gr2 - movgs gr2,bpcsr - bra __break_tlb_miss_common -#endif - -############################################################################### -# -# handle debug events originating with userspace -# -############################################################################### -__break_maybe_userspace: - LEDS 0x3003,gr2 - - setlos #BPSR_BS,gr2 - andcc gr3,gr2,gr0,icc0 - bne icc0,#0,__break_continue /* skip if PSR.S was 1 */ - - movsg brr,gr2 - andicc gr2,#BRR_ST|BRR_SB,gr0,icc0 - beq icc0,#0,__break_continue /* jump if not BREAK or single-step */ - - LEDS 0x3007,gr2 - - # do the first part of the exception prologue here - sethi.p %hi(__kernel_frame0_ptr),gr28 - setlo %lo(__kernel_frame0_ptr),gr28 - ldi @(gr28,#0),gr28 - andi gr28,#~7,gr28 - - # set up the kernel stack pointer - sti sp ,@(gr28,#REG_SP) - ori gr28,0,sp - sti gr0 ,@(gr28,#REG_GR(28)) - - stdi gr20,@(gr28,#REG_GR(20)) - stdi gr22,@(gr28,#REG_GR(22)) - - movsg tbr,gr20 - movsg bpcsr,gr21 - movsg psr,gr22 - - # determine the exception type and cancel single-stepping mode - or gr0,gr0,gr23 - - movsg dcr,gr2 - sethi.p %hi(DCR_SE),gr3 - setlo %lo(DCR_SE),gr3 - andcc gr2,gr3,gr0,icc0 - beq icc0,#0,__break_no_user_sstep /* must have been a BREAK insn */ - - not gr3,gr3 - and gr2,gr3,gr2 - movgs gr2,dcr - ori gr23,#REG__STATUS_STEP,gr23 - -__break_no_user_sstep: - LEDS 0x300f,gr2 - - movsg brr,gr2 - andi gr2,#BRR_ST|BRR_SB,gr2 - slli gr2,#1,gr2 - or gr23,gr2,gr23 - sti.p gr23,@(gr28,#REG__STATUS) /* record single step status */ - - # adjust the value acquired from TBR - this indicates the exception - setlos #~TBR_TT,gr2 - and.p gr20,gr2,gr20 - setlos #TBR_TT_BREAK,gr2 - or.p gr20,gr2,gr20 - - # fudge PSR.PS and BPSR.BS to return to kernel mode through the trap - # table as trap 126 - andi gr22,#~PSR_PS,gr22 /* PSR.PS should be 0 */ - movgs gr22,psr - - setlos #BPSR_BS,gr2 /* BPSR.BS should be 1 and BPSR.BET 0 */ - movgs gr2,bpsr - - # return through remainder of the exception prologue - # - need to load gr23 with return handler address - sethi.p %hi(__entry_return_from_user_exception),gr23 - setlo %lo(__entry_return_from_user_exception),gr23 - sethi.p %hi(__entry_common),gr3 - setlo %lo(__entry_common),gr3 - movgs gr3,bpcsr - - LEDS 0x301f,gr2 - - ldi @(gr31,#REG_CCR),gr3 - movgs gr3,ccr - lddi.p @(gr31,#REG_GR(2)),gr2 - xor gr31,gr31,gr31 - movgs gr0,brr -#ifdef CONFIG_MMU - movsg scr3,gr31 -#endif - rett #1 - -############################################################################### -# -# resume normal debug-mode entry -# -############################################################################### -__break_continue: - LEDS 0x4003,gr2 - - # set up the kernel stack pointer - sti sp,@(gr31,#REG_SP) - - sethi.p %hi(__break_frame_0),sp - setlo %lo(__break_frame_0),sp - - # finish building the exception frame - stdi gr4 ,@(gr31,#REG_GR(4)) - stdi gr6 ,@(gr31,#REG_GR(6)) - stdi gr8 ,@(gr31,#REG_GR(8)) - stdi gr10,@(gr31,#REG_GR(10)) - stdi gr12,@(gr31,#REG_GR(12)) - stdi gr14,@(gr31,#REG_GR(14)) - stdi gr16,@(gr31,#REG_GR(16)) - stdi gr18,@(gr31,#REG_GR(18)) - stdi gr20,@(gr31,#REG_GR(20)) - stdi gr22,@(gr31,#REG_GR(22)) - stdi gr24,@(gr31,#REG_GR(24)) - stdi gr26,@(gr31,#REG_GR(26)) - sti gr0 ,@(gr31,#REG_GR(28)) /* NULL frame pointer */ - sti gr29,@(gr31,#REG_GR(29)) - sti gr30,@(gr31,#REG_GR(30)) - sti gr8 ,@(gr31,#REG_ORIG_GR8) - -#ifdef CONFIG_MMU - movsg scr3,gr19 - sti gr19,@(gr31,#REG_GR(31)) -#endif - - movsg bpsr ,gr19 - movsg tbr ,gr20 - movsg bpcsr,gr21 - movsg psr ,gr22 - movsg isr ,gr23 - movsg cccr ,gr25 - movsg lr ,gr26 - movsg lcr ,gr27 - - andi.p gr22,#~(PSR_S|PSR_ET),gr5 /* rebuild PSR */ - andi gr19,#PSR_ET,gr4 - or.p gr4,gr5,gr5 - srli gr19,#10,gr4 - andi gr4,#PSR_S,gr4 - or.p gr4,gr5,gr5 - - setlos #-1,gr6 - sti gr20,@(gr31,#REG_TBR) - sti gr21,@(gr31,#REG_PC) - sti gr5 ,@(gr31,#REG_PSR) - sti gr23,@(gr31,#REG_ISR) - sti gr25,@(gr31,#REG_CCCR) - stdi gr26,@(gr31,#REG_LR) - sti gr6 ,@(gr31,#REG_SYSCALLNO) - - # store CPU-specific regs - movsg iacc0h,gr4 - movsg iacc0l,gr5 - stdi gr4,@(gr31,#REG_IACC0) - - movsg gner0,gr4 - movsg gner1,gr5 - stdi gr4,@(gr31,#REG_GNER0) - - # build the debug register frame - movsg brr,gr4 - movgs gr0,brr - movsg nmar,gr5 - movsg dcr,gr6 - - sethi.p %hi(__debug_status),gr7 - setlo %lo(__debug_status),gr7 - - stdi gr4 ,@(gr7,#DEBUG_BRR) - sti gr19,@(gr7,#DEBUG_BPSR) - sti.p gr6 ,@(gr7,#DEBUG_DCR) - - # trap exceptions during break handling and disable h/w breakpoints/watchpoints - sethi %hi(DCR_EBE),gr5 - setlo.p %lo(DCR_EBE),gr5 - sethi %hi(__entry_breaktrap_table),gr4 - setlo %lo(__entry_breaktrap_table),gr4 - movgs gr5,dcr - movgs gr4,tbr - - # set up kernel global registers - sethi.p %hi(__kernel_current_task),gr5 - setlo %lo(__kernel_current_task),gr5 - ld @(gr5,gr0),gr29 - ldi.p @(gr29,#4),gr15 ; __current_thread_info = current->thread_info - - sethi %hi(_gp),gr16 - setlo.p %lo(_gp),gr16 - - # make sure we (the kernel) get div-zero and misalignment exceptions - setlos #ISR_EDE|ISR_DTT_DIVBYZERO|ISR_EMAM_EXCEPTION,gr5 - movgs gr5,isr - - # enter the GDB stub - LEDS 0x4007,gr2 - - or.p gr0,gr0,fp - call debug_stub - - LEDS 0x403f,gr2 - - # return from break - lddi @(gr31,#REG_IACC0),gr4 - movgs gr4,iacc0h - movgs gr5,iacc0l - - lddi @(gr31,#REG_GNER0),gr4 - movgs gr4,gner0 - movgs gr5,gner1 - - lddi @(gr31,#REG_LR) ,gr26 - lddi @(gr31,#REG_CCR) ,gr24 - lddi @(gr31,#REG_PSR) ,gr22 - ldi @(gr31,#REG_PC) ,gr21 - ldi @(gr31,#REG_TBR) ,gr20 - - sethi.p %hi(__debug_status),gr6 - setlo %lo(__debug_status),gr6 - ldi.p @(gr6,#DEBUG_DCR) ,gr6 - - andi gr22,#PSR_S,gr19 /* rebuild BPSR */ - andi.p gr22,#PSR_ET,gr5 - slli gr19,#10,gr19 - or gr5,gr19,gr19 - - movgs gr6 ,dcr - movgs gr19,bpsr - movgs gr20,tbr - movgs gr21,bpcsr - movgs gr23,isr - movgs gr24,ccr - movgs gr25,cccr - movgs gr26,lr - movgs gr27,lcr - - LEDS 0x407f,gr2 - -#ifdef CONFIG_MMU - ldi @(gr31,#REG_GR(31)),gr2 - movgs gr2,scr3 -#endif - - ldi @(gr31,#REG_GR(30)),gr30 - ldi @(gr31,#REG_GR(29)),gr29 - lddi @(gr31,#REG_GR(26)),gr26 - lddi @(gr31,#REG_GR(24)),gr24 - lddi @(gr31,#REG_GR(22)),gr22 - lddi @(gr31,#REG_GR(20)),gr20 - lddi @(gr31,#REG_GR(18)),gr18 - lddi @(gr31,#REG_GR(16)),gr16 - lddi @(gr31,#REG_GR(14)),gr14 - lddi @(gr31,#REG_GR(12)),gr12 - lddi @(gr31,#REG_GR(10)),gr10 - lddi @(gr31,#REG_GR(8)) ,gr8 - lddi @(gr31,#REG_GR(6)) ,gr6 - lddi @(gr31,#REG_GR(4)) ,gr4 - lddi @(gr31,#REG_GR(2)) ,gr2 - ldi.p @(gr31,#REG_SP) ,sp - - xor gr31,gr31,gr31 - movgs gr0,brr -#ifdef CONFIG_MMU - movsg scr3,gr31 -#endif - rett #1 - -################################################################################################### -# -# GDB stub "system calls" -# -################################################################################################### - -#ifdef CONFIG_GDBSTUB - # void gdbstub_console_write(struct console *con, const char *p, unsigned n) - .globl gdbstub_console_write -gdbstub_console_write: - break - bralr -#endif - - # GDB stub BUG() trap - # GR8 is the proposed signal number - .globl __debug_bug_trap -__debug_bug_trap: - break - bralr - - # transfer kernel exeception to GDB for handling - .globl __break_hijack_kernel_event -__break_hijack_kernel_event: - break - .globl __break_hijack_kernel_event_breaks_here -__break_hijack_kernel_event_breaks_here: - nop - -#ifdef CONFIG_MMU - # handle a return from TLB-miss that requires single-step reactivation - .globl __break_tlb_miss_return_break -__break_tlb_miss_return_break: - break -__break_tlb_miss_return_breaks_here: - nop -#endif - - # guard the first .text label in the next file from confusion - nop diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S deleted file mode 100644 index 53deeb5d7e87..000000000000 --- a/arch/frv/kernel/cmode.S +++ /dev/null @@ -1,189 +0,0 @@ -/* cmode.S: clock mode management - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@infradead.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/sys.h> -#include <linux/linkage.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/ptrace.h> -#include <asm/errno.h> -#include <asm/cache.h> -#include <asm/spr-regs.h> - -#define __addr_MASK 0xfeff9820 /* interrupt controller mask */ - -#define __addr_SDRAMC 0xfe000400 /* SDRAM controller regs */ -#define SDRAMC_DSTS 0x28 /* SDRAM status */ -#define SDRAMC_DSTS_SSI 0x00000001 /* indicates that the SDRAM is in self-refresh mode */ -#define SDRAMC_DRCN 0x30 /* SDRAM refresh control */ -#define SDRAMC_DRCN_SR 0x00000001 /* transition SDRAM into self-refresh mode */ -#define __addr_CLKC 0xfeff9a00 -#define CLKC_SWCMODE 0x00000008 -#define __addr_LEDS 0xe1200004 - -.macro li v r - sethi.p %hi(\v),\r - setlo %lo(\v),\r -.endm - - .text - .balign 4 - - -############################################################################### -# -# Change CMODE -# - void frv_change_cmode(int cmode) -# -############################################################################### - .globl frv_change_cmode - .type frv_change_cmode,@function - -.macro LEDS v -#ifdef DEBUG_CMODE - setlos #~\v,gr10 - sti gr10,@(gr11,#0) - membar -#endif -.endm - -frv_change_cmode: - movsg lr,gr9 -#ifdef DEBUG_CMODE - li __addr_LEDS,gr11 -#endif - dcef @(gr0,gr0),#1 - - # Shift argument left by 24 bits to fit in SWCMODE register later. - slli gr8,#24,gr8 - - # (1) Set '0' in the PSR.ET bit, and prohibit interrupts. - movsg psr,gr14 - andi gr14,#~PSR_ET,gr3 - movgs gr3,psr - -#if 0 // Fujitsu recommend to skip this and will update docs. - # (2) Set '0' to all bits of the MASK register of the interrupt - # controller, and mask interrupts. - li __addr_MASK,gr12 - ldi @(gr12,#0),gr13 - li 0xffff0000,gr4 - sti gr4,@(gr12,#0) -#endif - - # (3) Stop the transfer function of DMAC. Stop all the bus masters - # to access SDRAM and the internal resources. - - # (already done by caller) - - # (4) Preload a series of following instructions to the instruction - # cache. - li #__cmode_icache_lock_start,gr3 - li #__cmode_icache_lock_end,gr4 - -1: icpl gr3,gr0,#1 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - # Set up addresses in regs for later steps. - setlos SDRAMC_DRCN_SR,gr3 - li __addr_SDRAMC,gr4 - li __addr_CLKC,gr5 - ldi @(gr5,#0),gr6 - li #0x80000000,gr7 - or gr6,gr7,gr6 - - bra __cmode_icache_lock_start - - .balign L1_CACHE_BYTES -__cmode_icache_lock_start: - - # (5) Flush the content of all caches by the DCEF instruction. - dcef @(gr0,gr0),#1 - - # (6) Execute loading the dummy for SDRAM. - ldi @(gr9,#0),gr0 - - # (7) Set '1' to the DRCN.SR bit, and change SDRAM to the - # self-refresh mode. Execute the dummy load to all memory - # devices set to cacheable on the external bus side in parallel - # with this. - sti gr3,@(gr4,#SDRAMC_DRCN) - - # (8) Execute memory barrier instruction (MEMBAR). - membar - - # (9) Read the DSTS register repeatedly until '1' stands in the - # DSTS.SSI field. -1: ldi @(gr4,#SDRAMC_DSTS),gr3 - andicc gr3,#SDRAMC_DSTS_SSI,gr3,icc0 - beq icc0,#0,1b - - # (10) Execute memory barrier instruction (MEMBAR). - membar - -#if 1 - # (11) Set the value of CMODE that you want to change to - # SWCMODE.SWCM[3:0]. - sti gr8,@(gr5,#CLKC_SWCMODE) - - # (12) Set '1' to the CLKC.SWEN bit. In that case, do not change - # fields other than SWEN of the CLKC register. - sti gr6,@(gr5,#0) -#endif - # (13) Execute the instruction just after the memory barrier - # instruction that executes the self-loop 256 times. (Meanwhile, - # the CMODE switch is done.) - membar - setlos #256,gr7 -2: subicc gr7,#1,gr7,icc0 - bne icc0,#2,2b - - LEDS 0x36 - - # (14) Release the self-refresh of SDRAM. - sti gr0,@(gr4,#SDRAMC_DRCN) - - # Wait for it... -3: ldi @(gr4,#SDRAMC_DSTS),gr3 - andicc gr3,#SDRAMC_DSTS_SSI,gr3,icc0 - bne icc0,#2,3b - -#if 0 - li 0x0100000,gr10 -4: subicc gr10,#1,gr10,icc0 - - bne icc0,#0,4b -#endif - -__cmode_icache_lock_end: - - li #__cmode_icache_lock_start,gr3 - li #__cmode_icache_lock_end,gr4 - -4: icul gr3 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,4b - -#if 0 // Fujitsu recommend to skip this and will update docs. - # (15) Release the interrupt mask setting of the MASK register of - # the interrupt controller if necessary. - sti gr13,@(gr12,#0) -#endif - # (16) Set 1' in the PSR.ET bit, and permit interrupt. - movgs gr14,psr - - bralr - - .size frv_change_cmode, .-frv_change_cmode diff --git a/arch/frv/kernel/debug-stub.c b/arch/frv/kernel/debug-stub.c deleted file mode 100644 index a0228f717ef2..000000000000 --- a/arch/frv/kernel/debug-stub.c +++ /dev/null @@ -1,258 +0,0 @@ -/* debug-stub.c: debug-mode stub - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/serial_reg.h> -#include <linux/start_kernel.h> - -#include <asm/serial-regs.h> -#include <asm/timer-regs.h> -#include <asm/irc-regs.h> -#include <asm/gdb-stub.h> -#include "gdb-io.h" - -/* CPU board CON5 */ -#define __UART0(X) (*(volatile uint8_t *)(UART0_BASE + (UART_##X))) - -#define LSR_WAIT_FOR0(STATE) \ -do { \ -} while (!(__UART0(LSR) & UART_LSR_##STATE)) - -#define FLOWCTL_QUERY0(LINE) ({ __UART0(MSR) & UART_MSR_##LINE; }) -#define FLOWCTL_CLEAR0(LINE) do { __UART0(MCR) &= ~UART_MCR_##LINE; } while (0) -#define FLOWCTL_SET0(LINE) do { __UART0(MCR) |= UART_MCR_##LINE; } while (0) - -#define FLOWCTL_WAIT_FOR0(LINE) \ -do { \ - gdbstub_do_rx(); \ -} while(!FLOWCTL_QUERY(LINE)) - -struct frv_debug_status __debug_status; - -static void __init debug_stub_init(void); - -/*****************************************************************************/ -/* - * debug mode handler stub - * - we come here with the CPU in debug mode and with exceptions disabled - * - handle debugging services for userspace - */ -asmlinkage void debug_stub(void) -{ - unsigned long hsr0; - int type = 0; - - static u8 inited = 0; - if (!inited) { - debug_stub_init(); - type = -1; - inited = 1; - } - - hsr0 = __get_HSR(0); - if (hsr0 & HSR0_ETMD) - __set_HSR(0, hsr0 & ~HSR0_ETMD); - - /* disable single stepping */ - __debug_status.dcr &= ~DCR_SE; - - /* kernel mode can propose an exception be handled in debug mode by jumping to a special - * location */ - if (__debug_frame->pc == (unsigned long) __break_hijack_kernel_event_breaks_here) { - /* replace the debug frame with the kernel frame and discard - * the top kernel context */ - *__debug_frame = *__frame; - __frame = __debug_frame->next_frame; - __debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12; - __debug_status.brr |= BRR_EB; - } - - if (__debug_frame->pc == (unsigned long) __debug_bug_trap + 4) { - __debug_frame->pc = __debug_frame->lr; - type = __debug_frame->gr8; - } - -#ifdef CONFIG_GDBSTUB - gdbstub(type); -#endif - - if (hsr0 & HSR0_ETMD) - __set_HSR(0, __get_HSR(0) | HSR0_ETMD); - -} /* end debug_stub() */ - -/*****************************************************************************/ -/* - * debug stub initialisation - */ -static void __init debug_stub_init(void) -{ - __set_IRR(6, 0xff000000); /* map ERRs to NMI */ - __set_IITMR(1, 0x20000000); /* ERR0/1, UART0/1 IRQ detect levels */ - - asm volatile(" movgs gr0,ibar0 \n" - " movgs gr0,ibar1 \n" - " movgs gr0,ibar2 \n" - " movgs gr0,ibar3 \n" - " movgs gr0,dbar0 \n" - " movgs gr0,dbmr00 \n" - " movgs gr0,dbmr01 \n" - " movgs gr0,dbdr00 \n" - " movgs gr0,dbdr01 \n" - " movgs gr0,dbar1 \n" - " movgs gr0,dbmr10 \n" - " movgs gr0,dbmr11 \n" - " movgs gr0,dbdr10 \n" - " movgs gr0,dbdr11 \n" - ); - - /* deal with debugging stub initialisation and initial pause */ - if (__debug_frame->pc == (unsigned long) __debug_stub_init_break) - __debug_frame->pc = (unsigned long) start_kernel; - - /* enable the debug events we want to trap */ - __debug_status.dcr = DCR_EBE; - -#ifdef CONFIG_GDBSTUB - gdbstub_init(); -#endif - - __clr_MASK_all(); - __clr_MASK(15); - __clr_RC(15); - -} /* end debug_stub_init() */ - -/*****************************************************************************/ -/* - * kernel "exit" trap for gdb stub - */ -void debug_stub_exit(int status) -{ - -#ifdef CONFIG_GDBSTUB - gdbstub_exit(status); -#endif - -} /* end debug_stub_exit() */ - -/*****************************************************************************/ -/* - * send string to serial port - */ -void debug_to_serial(const char *p, int n) -{ - char ch; - - for (; n > 0; n--) { - ch = *p++; - FLOWCTL_SET0(DTR); - LSR_WAIT_FOR0(THRE); - // FLOWCTL_WAIT_FOR(CTS); - - if (ch == 0x0a) { - __UART0(TX) = 0x0d; - mb(); - LSR_WAIT_FOR0(THRE); - // FLOWCTL_WAIT_FOR(CTS); - } - __UART0(TX) = ch; - mb(); - - FLOWCTL_CLEAR0(DTR); - } - -} /* end debug_to_serial() */ - -/*****************************************************************************/ -/* - * send string to serial port - */ -void debug_to_serial2(const char *fmt, ...) -{ - va_list va; - char buf[64]; - int n; - - va_start(va, fmt); - n = vsprintf(buf, fmt, va); - va_end(va); - - debug_to_serial(buf, n); - -} /* end debug_to_serial2() */ - -/*****************************************************************************/ -/* - * set up the ttyS0 serial port baud rate timers - */ -void __init console_set_baud(unsigned baud) -{ - unsigned value, high, low; - u8 lcr; - - /* work out the divisor to give us the nearest higher baud rate */ - value = __serial_clock_speed_HZ / 16 / baud; - - /* determine the baud rate range */ - high = __serial_clock_speed_HZ / 16 / value; - low = __serial_clock_speed_HZ / 16 / (value + 1); - - /* pick the nearest bound */ - if (low + (high - low) / 2 > baud) - value++; - - lcr = __UART0(LCR); - __UART0(LCR) |= UART_LCR_DLAB; - mb(); - __UART0(DLL) = value & 0xff; - __UART0(DLM) = (value >> 8) & 0xff; - mb(); - __UART0(LCR) = lcr; - mb(); - -} /* end console_set_baud() */ - -/*****************************************************************************/ -/* - * - */ -int __init console_get_baud(void) -{ - unsigned value; - u8 lcr; - - lcr = __UART0(LCR); - __UART0(LCR) |= UART_LCR_DLAB; - mb(); - value = __UART0(DLM) << 8; - value |= __UART0(DLL); - __UART0(LCR) = lcr; - mb(); - - return value; -} /* end console_get_baud() */ - -/*****************************************************************************/ -/* - * display BUG() info - */ -#ifndef CONFIG_NO_KERNEL_MSG -void __debug_bug_printk(const char *file, unsigned line) -{ - printk("kernel BUG at %s:%d!\n", file, line); - -} /* end __debug_bug_printk() */ -#endif diff --git a/arch/frv/kernel/dma.c b/arch/frv/kernel/dma.c deleted file mode 100644 index 370dc9fa0b11..000000000000 --- a/arch/frv/kernel/dma.c +++ /dev/null @@ -1,463 +0,0 @@ -/* dma.c: DMA controller management on FR401 and the like - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <asm/dma.h> -#include <asm/gpio-regs.h> -#include <asm/irc-regs.h> -#include <asm/cpu-irqs.h> - -struct frv_dma_channel { - uint8_t flags; -#define FRV_DMA_FLAGS_RESERVED 0x01 -#define FRV_DMA_FLAGS_INUSE 0x02 -#define FRV_DMA_FLAGS_PAUSED 0x04 - uint8_t cap; /* capabilities available */ - int irq; /* completion IRQ */ - uint32_t dreqbit; - uint32_t dackbit; - uint32_t donebit; - const unsigned long ioaddr; /* DMA controller regs addr */ - const char *devname; - dma_irq_handler_t handler; - void *data; -}; - - -#define __get_DMAC(IO,X) ({ *(volatile unsigned long *)((IO) + DMAC_##X##x); }) - -#define __set_DMAC(IO,X,V) \ -do { \ - *(volatile unsigned long *)((IO) + DMAC_##X##x) = (V); \ - mb(); \ -} while(0) - -#define ___set_DMAC(IO,X,V) \ -do { \ - *(volatile unsigned long *)((IO) + DMAC_##X##x) = (V); \ -} while(0) - - -static struct frv_dma_channel frv_dma_channels[FRV_DMA_NCHANS] = { - [0] = { - .cap = FRV_DMA_CAP_DREQ | FRV_DMA_CAP_DACK | FRV_DMA_CAP_DONE, - .irq = IRQ_CPU_DMA0, - .dreqbit = SIR_DREQ0_INPUT, - .dackbit = SOR_DACK0_OUTPUT, - .donebit = SOR_DONE0_OUTPUT, - .ioaddr = 0xfe000900, - }, - [1] = { - .cap = FRV_DMA_CAP_DREQ | FRV_DMA_CAP_DACK | FRV_DMA_CAP_DONE, - .irq = IRQ_CPU_DMA1, - .dreqbit = SIR_DREQ1_INPUT, - .dackbit = SOR_DACK1_OUTPUT, - .donebit = SOR_DONE1_OUTPUT, - .ioaddr = 0xfe000980, - }, - [2] = { - .cap = FRV_DMA_CAP_DREQ | FRV_DMA_CAP_DACK, - .irq = IRQ_CPU_DMA2, - .dreqbit = SIR_DREQ2_INPUT, - .dackbit = SOR_DACK2_OUTPUT, - .ioaddr = 0xfe000a00, - }, - [3] = { - .cap = FRV_DMA_CAP_DREQ | FRV_DMA_CAP_DACK, - .irq = IRQ_CPU_DMA3, - .dreqbit = SIR_DREQ3_INPUT, - .dackbit = SOR_DACK3_OUTPUT, - .ioaddr = 0xfe000a80, - }, - [4] = { - .cap = FRV_DMA_CAP_DREQ, - .irq = IRQ_CPU_DMA4, - .dreqbit = SIR_DREQ4_INPUT, - .ioaddr = 0xfe001000, - }, - [5] = { - .cap = FRV_DMA_CAP_DREQ, - .irq = IRQ_CPU_DMA5, - .dreqbit = SIR_DREQ5_INPUT, - .ioaddr = 0xfe001080, - }, - [6] = { - .cap = FRV_DMA_CAP_DREQ, - .irq = IRQ_CPU_DMA6, - .dreqbit = SIR_DREQ6_INPUT, - .ioaddr = 0xfe001100, - }, - [7] = { - .cap = FRV_DMA_CAP_DREQ, - .irq = IRQ_CPU_DMA7, - .dreqbit = SIR_DREQ7_INPUT, - .ioaddr = 0xfe001180, - }, -}; - -static DEFINE_RWLOCK(frv_dma_channels_lock); - -unsigned int frv_dma_inprogress; - -#define frv_clear_dma_inprogress(channel) \ - (void)__atomic32_fetch_and(~(1 << (channel)), &frv_dma_inprogress); - -#define frv_set_dma_inprogress(channel) \ - (void)__atomic32_fetch_or(1 << (channel), &frv_dma_inprogress); - -/*****************************************************************************/ -/* - * DMA irq handler - determine channel involved, grab status and call real handler - */ -static irqreturn_t dma_irq_handler(int irq, void *_channel) -{ - struct frv_dma_channel *channel = _channel; - - frv_clear_dma_inprogress(channel - frv_dma_channels); - return channel->handler(channel - frv_dma_channels, - __get_DMAC(channel->ioaddr, CSTR), - channel->data); - -} /* end dma_irq_handler() */ - -/*****************************************************************************/ -/* - * Determine which DMA controllers are present on this CPU - */ -void __init frv_dma_init(void) -{ - unsigned long psr = __get_PSR(); - int num_dma, i; - - /* First, determine how many DMA channels are available */ - switch (PSR_IMPLE(psr)) { - case PSR_IMPLE_FR405: - case PSR_IMPLE_FR451: - case PSR_IMPLE_FR501: - case PSR_IMPLE_FR551: - num_dma = FRV_DMA_8CHANS; - break; - - case PSR_IMPLE_FR401: - default: - num_dma = FRV_DMA_4CHANS; - break; - } - - /* Now mark all of the non-existent channels as reserved */ - for(i = num_dma; i < FRV_DMA_NCHANS; i++) - frv_dma_channels[i].flags = FRV_DMA_FLAGS_RESERVED; - -} /* end frv_dma_init() */ - -/*****************************************************************************/ -/* - * allocate a DMA controller channel and the IRQ associated with it - */ -int frv_dma_open(const char *devname, - unsigned long dmamask, - int dmacap, - dma_irq_handler_t handler, - unsigned long irq_flags, - void *data) -{ - struct frv_dma_channel *channel; - int dma, ret; - uint32_t val; - - write_lock(&frv_dma_channels_lock); - - ret = -ENOSPC; - - for (dma = FRV_DMA_NCHANS - 1; dma >= 0; dma--) { - channel = &frv_dma_channels[dma]; - - if (!test_bit(dma, &dmamask)) - continue; - - if ((channel->cap & dmacap) != dmacap) - continue; - - if (!frv_dma_channels[dma].flags) - goto found; - } - - goto out; - - found: - ret = request_irq(channel->irq, dma_irq_handler, irq_flags, devname, channel); - if (ret < 0) - goto out; - - /* okay, we've allocated all the resources */ - channel = &frv_dma_channels[dma]; - - channel->flags |= FRV_DMA_FLAGS_INUSE; - channel->devname = devname; - channel->handler = handler; - channel->data = data; - - /* Now make sure we are set up for DMA and not GPIO */ - /* SIR bit must be set for DMA to work */ - __set_SIR(channel->dreqbit | __get_SIR()); - /* SOR bits depend on what the caller requests */ - val = __get_SOR(); - if(dmacap & FRV_DMA_CAP_DACK) - val |= channel->dackbit; - else - val &= ~channel->dackbit; - if(dmacap & FRV_DMA_CAP_DONE) - val |= channel->donebit; - else - val &= ~channel->donebit; - __set_SOR(val); - - ret = dma; - out: - write_unlock(&frv_dma_channels_lock); - return ret; -} /* end frv_dma_open() */ - -EXPORT_SYMBOL(frv_dma_open); - -/*****************************************************************************/ -/* - * close a DMA channel and its associated interrupt - */ -void frv_dma_close(int dma) -{ - struct frv_dma_channel *channel = &frv_dma_channels[dma]; - unsigned long flags; - - write_lock_irqsave(&frv_dma_channels_lock, flags); - - free_irq(channel->irq, channel); - frv_dma_stop(dma); - - channel->flags &= ~FRV_DMA_FLAGS_INUSE; - - write_unlock_irqrestore(&frv_dma_channels_lock, flags); -} /* end frv_dma_close() */ - -EXPORT_SYMBOL(frv_dma_close); - -/*****************************************************************************/ -/* - * set static configuration on a DMA channel - */ -void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr) -{ - unsigned long ioaddr = frv_dma_channels[dma].ioaddr; - - ___set_DMAC(ioaddr, CCFR, ccfr); - ___set_DMAC(ioaddr, CCTR, cctr); - ___set_DMAC(ioaddr, APR, apr); - mb(); - -} /* end frv_dma_config() */ - -EXPORT_SYMBOL(frv_dma_config); - -/*****************************************************************************/ -/* - * start a DMA channel - */ -void frv_dma_start(int dma, - unsigned long sba, unsigned long dba, - unsigned long pix, unsigned long six, unsigned long bcl) -{ - unsigned long ioaddr = frv_dma_channels[dma].ioaddr; - - ___set_DMAC(ioaddr, SBA, sba); - ___set_DMAC(ioaddr, DBA, dba); - ___set_DMAC(ioaddr, PIX, pix); - ___set_DMAC(ioaddr, SIX, six); - ___set_DMAC(ioaddr, BCL, bcl); - ___set_DMAC(ioaddr, CSTR, 0); - mb(); - - __set_DMAC(ioaddr, CCTR, __get_DMAC(ioaddr, CCTR) | DMAC_CCTRx_ACT); - frv_set_dma_inprogress(dma); - -} /* end frv_dma_start() */ - -EXPORT_SYMBOL(frv_dma_start); - -/*****************************************************************************/ -/* - * restart a DMA channel that's been stopped in circular addressing mode by comparison-end - */ -void frv_dma_restart_circular(int dma, unsigned long six) -{ - unsigned long ioaddr = frv_dma_channels[dma].ioaddr; - - ___set_DMAC(ioaddr, SIX, six); - ___set_DMAC(ioaddr, CSTR, __get_DMAC(ioaddr, CSTR) & ~DMAC_CSTRx_CE); - mb(); - - __set_DMAC(ioaddr, CCTR, __get_DMAC(ioaddr, CCTR) | DMAC_CCTRx_ACT); - frv_set_dma_inprogress(dma); - -} /* end frv_dma_restart_circular() */ - -EXPORT_SYMBOL(frv_dma_restart_circular); - -/*****************************************************************************/ -/* - * stop a DMA channel - */ -void frv_dma_stop(int dma) -{ - unsigned long ioaddr = frv_dma_channels[dma].ioaddr; - uint32_t cctr; - - ___set_DMAC(ioaddr, CSTR, 0); - cctr = __get_DMAC(ioaddr, CCTR); - cctr &= ~(DMAC_CCTRx_IE | DMAC_CCTRx_ACT); - cctr |= DMAC_CCTRx_FC; /* fifo clear */ - __set_DMAC(ioaddr, CCTR, cctr); - __set_DMAC(ioaddr, BCL, 0); - frv_clear_dma_inprogress(dma); -} /* end frv_dma_stop() */ - -EXPORT_SYMBOL(frv_dma_stop); - -/*****************************************************************************/ -/* - * test interrupt status of DMA channel - */ -int is_frv_dma_interrupting(int dma) -{ - unsigned long ioaddr = frv_dma_channels[dma].ioaddr; - - return __get_DMAC(ioaddr, CSTR) & (1 << 23); - -} /* end is_frv_dma_interrupting() */ - -EXPORT_SYMBOL(is_frv_dma_interrupting); - -/*****************************************************************************/ -/* - * dump data about a DMA channel - */ -void frv_dma_dump(int dma) -{ - unsigned long ioaddr = frv_dma_channels[dma].ioaddr; - unsigned long cstr, pix, six, bcl; - - cstr = __get_DMAC(ioaddr, CSTR); - pix = __get_DMAC(ioaddr, PIX); - six = __get_DMAC(ioaddr, SIX); - bcl = __get_DMAC(ioaddr, BCL); - - printk("DMA[%d] cstr=%lx pix=%lx six=%lx bcl=%lx\n", dma, cstr, pix, six, bcl); - -} /* end frv_dma_dump() */ - -EXPORT_SYMBOL(frv_dma_dump); - -/*****************************************************************************/ -/* - * pause all DMA controllers - * - called by clock mangling routines - * - caller must be holding interrupts disabled - */ -void frv_dma_pause_all(void) -{ - struct frv_dma_channel *channel; - unsigned long ioaddr; - unsigned long cstr, cctr; - int dma; - - write_lock(&frv_dma_channels_lock); - - for (dma = FRV_DMA_NCHANS - 1; dma >= 0; dma--) { - channel = &frv_dma_channels[dma]; - - if (!(channel->flags & FRV_DMA_FLAGS_INUSE)) - continue; - - ioaddr = channel->ioaddr; - cctr = __get_DMAC(ioaddr, CCTR); - if (cctr & DMAC_CCTRx_ACT) { - cctr &= ~DMAC_CCTRx_ACT; - __set_DMAC(ioaddr, CCTR, cctr); - - do { - cstr = __get_DMAC(ioaddr, CSTR); - } while (cstr & DMAC_CSTRx_BUSY); - - if (cstr & DMAC_CSTRx_FED) - channel->flags |= FRV_DMA_FLAGS_PAUSED; - frv_clear_dma_inprogress(dma); - } - } - -} /* end frv_dma_pause_all() */ - -EXPORT_SYMBOL(frv_dma_pause_all); - -/*****************************************************************************/ -/* - * resume paused DMA controllers - * - called by clock mangling routines - * - caller must be holding interrupts disabled - */ -void frv_dma_resume_all(void) -{ - struct frv_dma_channel *channel; - unsigned long ioaddr; - unsigned long cstr, cctr; - int dma; - - for (dma = FRV_DMA_NCHANS - 1; dma >= 0; dma--) { - channel = &frv_dma_channels[dma]; - - if (!(channel->flags & FRV_DMA_FLAGS_PAUSED)) - continue; - - ioaddr = channel->ioaddr; - cstr = __get_DMAC(ioaddr, CSTR); - cstr &= ~(DMAC_CSTRx_FED | DMAC_CSTRx_INT); - __set_DMAC(ioaddr, CSTR, cstr); - - cctr = __get_DMAC(ioaddr, CCTR); - cctr |= DMAC_CCTRx_ACT; - __set_DMAC(ioaddr, CCTR, cctr); - - channel->flags &= ~FRV_DMA_FLAGS_PAUSED; - frv_set_dma_inprogress(dma); - } - - write_unlock(&frv_dma_channels_lock); - -} /* end frv_dma_resume_all() */ - -EXPORT_SYMBOL(frv_dma_resume_all); - -/*****************************************************************************/ -/* - * dma status clear - */ -void frv_dma_status_clear(int dma) -{ - unsigned long ioaddr = frv_dma_channels[dma].ioaddr; - uint32_t cctr; - ___set_DMAC(ioaddr, CSTR, 0); - - cctr = __get_DMAC(ioaddr, CCTR); -} /* end frv_dma_status_clear() */ - -EXPORT_SYMBOL(frv_dma_status_clear); diff --git a/arch/frv/kernel/entry-table.S b/arch/frv/kernel/entry-table.S deleted file mode 100644 index 06c5ae191e59..000000000000 --- a/arch/frv/kernel/entry-table.S +++ /dev/null @@ -1,329 +0,0 @@ -/* entry-table.S: main trap vector tables and exception jump table - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/sys.h> -#include <linux/linkage.h> -#include <asm/spr-regs.h> - -############################################################################### -# -# Declare the main trap and vector tables -# -# There are six tables: -# -# (1) The trap table for debug mode -# (2) The trap table for kernel mode -# (3) The trap table for user mode -# -# The CPU jumps to an appropriate slot in the appropriate table to perform -# exception processing. We have three different tables for the three -# different CPU modes because there is no hardware differentiation between -# stack pointers for these three modes, and so we have to invent one when -# crossing mode boundaries. -# -# (4) The exception handler vector table -# -# The user and kernel trap tables use the same prologue for normal -# exception processing. The prologue then jumps to the handler in this -# table, as indexed by the exception ID from the TBR. -# -# (5) The fixup table for kernel-trap single-step -# (6) The fixup table for user-trap single-step -# -# Due to the way single-stepping works on this CPU (single-step is not -# disabled when crossing exception boundaries, only when in debug mode), -# we have to catch the single-step event in break.S and jump to the fixup -# routine pointed to by this table. -# -# The linker script places the user mode and kernel mode trap tables on to -# the same 8Kb page, so that break.S can be more efficient when performing -# single-step bypass management -# -############################################################################### - - # trap table for entry from debug mode - .section .trap.break,"ax" - .balign 256*16 - .globl __entry_breaktrap_table -__entry_breaktrap_table: - - # trap table for entry from user mode - .section .trap.user,"ax" - .balign 256*16 - .globl __entry_usertrap_table -__entry_usertrap_table: - - # trap table for entry from kernel mode - .section .trap.kernel,"ax" - .balign 256*16 - .globl __entry_kerneltrap_table -__entry_kerneltrap_table: - - # exception handler jump table - .section .trap.vector,"ax" - .balign 256*4 - .globl __entry_vector_table -__entry_vector_table: - - # trap fixup table for single-stepping in user mode - .section .trap.fixup.user,"a" - .balign 256*4 - .globl __break_usertrap_fixup_table -__break_usertrap_fixup_table: - - # trap fixup table for single-stepping in user mode - .section .trap.fixup.kernel,"a" - .balign 256*4 - .globl __break_kerneltrap_fixup_table -__break_kerneltrap_fixup_table: - - # handler declaration for a software or program interrupt -.macro VECTOR_SOFTPROG tbr_tt, vec - .section .trap.user - .org \tbr_tt - bra __entry_uspace_softprog_interrupt - .section .trap.fixup.user - .org \tbr_tt >> 2 - .long __break_step_uspace_softprog_interrupt - .section .trap.kernel - .org \tbr_tt - bra __entry_kernel_softprog_interrupt - .section .trap.fixup.kernel - .org \tbr_tt >> 2 - .long __break_step_kernel_softprog_interrupt - .section .trap.vector - .org \tbr_tt >> 2 - .long \vec -.endm - - # handler declaration for a maskable external interrupt -.macro VECTOR_IRQ tbr_tt, vec - .section .trap.user - .org \tbr_tt - bra __entry_uspace_external_interrupt - .section .trap.fixup.user - .org \tbr_tt >> 2 - .long __break_step_uspace_external_interrupt - .section .trap.kernel - .org \tbr_tt - # deal with virtual interrupt disablement - beq icc2,#0,__entry_kernel_external_interrupt_virtually_disabled - bra __entry_kernel_external_interrupt - .section .trap.fixup.kernel - .org \tbr_tt >> 2 - .long __break_step_kernel_external_interrupt - .section .trap.vector - .org \tbr_tt >> 2 - .long \vec -.endm - - # handler declaration for an NMI external interrupt -.macro VECTOR_NMI tbr_tt, vec - .section .trap.user - .org \tbr_tt - break - break - break - break - .section .trap.kernel - .org \tbr_tt - break - break - break - break - .section .trap.vector - .org \tbr_tt >> 2 - .long \vec -.endm - - # handler declaration for an MMU only software or program interrupt -.macro VECTOR_SP_MMU tbr_tt, vec -#ifdef CONFIG_MMU - VECTOR_SOFTPROG \tbr_tt, \vec -#else - VECTOR_NMI \tbr_tt, 0 -#endif -.endm - - -############################################################################### -# -# specification of the vectors -# - note: each macro inserts code into multiple sections -# -############################################################################### - VECTOR_SP_MMU TBR_TT_INSTR_MMU_MISS, __entry_insn_mmu_miss - VECTOR_SOFTPROG TBR_TT_INSTR_ACC_ERROR, __entry_insn_access_error - VECTOR_SOFTPROG TBR_TT_INSTR_ACC_EXCEP, __entry_insn_access_exception - VECTOR_SOFTPROG TBR_TT_PRIV_INSTR, __entry_privileged_instruction - VECTOR_SOFTPROG TBR_TT_ILLEGAL_INSTR, __entry_illegal_instruction - VECTOR_SOFTPROG TBR_TT_FP_EXCEPTION, __entry_media_exception - VECTOR_SOFTPROG TBR_TT_MP_EXCEPTION, __entry_media_exception - VECTOR_SOFTPROG TBR_TT_DATA_ACC_ERROR, __entry_data_access_error - VECTOR_SP_MMU TBR_TT_DATA_MMU_MISS, __entry_data_mmu_miss - VECTOR_SOFTPROG TBR_TT_DATA_ACC_EXCEP, __entry_data_access_exception - VECTOR_SOFTPROG TBR_TT_DATA_STR_ERROR, __entry_data_store_error - VECTOR_SOFTPROG TBR_TT_DIVISION_EXCEP, __entry_division_exception - -#ifdef CONFIG_MMU - .section .trap.user - .org TBR_TT_INSTR_TLB_MISS - .globl __trap_user_insn_tlb_miss -__trap_user_insn_tlb_miss: - movsg ear0,gr28 /* faulting address */ - movsg scr0,gr31 /* get mapped PTD coverage start address */ - xor.p gr28,gr31,gr31 /* compare addresses */ - bra __entry_user_insn_tlb_miss - - .org TBR_TT_DATA_TLB_MISS - .globl __trap_user_data_tlb_miss -__trap_user_data_tlb_miss: - movsg ear0,gr28 /* faulting address */ - movsg scr1,gr31 /* get mapped PTD coverage start address */ - xor.p gr28,gr31,gr31 /* compare addresses */ - bra __entry_user_data_tlb_miss - - .section .trap.kernel - .org TBR_TT_INSTR_TLB_MISS - .globl __trap_kernel_insn_tlb_miss -__trap_kernel_insn_tlb_miss: - movsg ear0,gr29 /* faulting address */ - movsg scr0,gr31 /* get mapped PTD coverage start address */ - xor.p gr29,gr31,gr31 /* compare addresses */ - bra __entry_kernel_insn_tlb_miss - - .org TBR_TT_DATA_TLB_MISS - .globl __trap_kernel_data_tlb_miss -__trap_kernel_data_tlb_miss: - movsg ear0,gr29 /* faulting address */ - movsg scr1,gr31 /* get mapped PTD coverage start address */ - xor.p gr29,gr31,gr31 /* compare addresses */ - bra __entry_kernel_data_tlb_miss - - .section .trap.fixup.user - .org TBR_TT_INSTR_TLB_MISS >> 2 - .globl __trap_fixup_user_insn_tlb_miss -__trap_fixup_user_insn_tlb_miss: - .long __break_user_insn_tlb_miss - .org TBR_TT_DATA_TLB_MISS >> 2 - .globl __trap_fixup_user_data_tlb_miss -__trap_fixup_user_data_tlb_miss: - .long __break_user_data_tlb_miss - - .section .trap.fixup.kernel - .org TBR_TT_INSTR_TLB_MISS >> 2 - .globl __trap_fixup_kernel_insn_tlb_miss -__trap_fixup_kernel_insn_tlb_miss: - .long __break_kernel_insn_tlb_miss - .org TBR_TT_DATA_TLB_MISS >> 2 - .globl __trap_fixup_kernel_data_tlb_miss -__trap_fixup_kernel_data_tlb_miss: - .long __break_kernel_data_tlb_miss - - .section .trap.vector - .org TBR_TT_INSTR_TLB_MISS >> 2 - .long __entry_insn_mmu_fault - .org TBR_TT_DATA_TLB_MISS >> 2 - .long __entry_data_mmu_fault -#endif - - VECTOR_SP_MMU TBR_TT_DATA_DAT_EXCEP, __entry_data_dat_fault - VECTOR_NMI TBR_TT_DECREMENT_TIMER, __entry_do_NMI - VECTOR_SOFTPROG TBR_TT_COMPOUND_EXCEP, __entry_compound_exception - VECTOR_IRQ TBR_TT_INTERRUPT_1, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_2, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_3, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_4, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_5, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_6, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_7, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_8, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_9, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_10, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_11, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_12, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_13, __entry_do_IRQ - VECTOR_IRQ TBR_TT_INTERRUPT_14, __entry_do_IRQ - VECTOR_NMI TBR_TT_INTERRUPT_15, __entry_do_NMI - - # miscellaneous user mode entry points - .section .trap.user - .org TBR_TT_TRAP0 - .rept 127 - bra __entry_uspace_softprog_interrupt - .long 0,0,0 - .endr - .org TBR_TT_BREAK - bra __entry_break - .long 0,0,0 - - .section .trap.fixup.user - .org TBR_TT_TRAP0 >> 2 - .rept 127 - .long __break_step_uspace_softprog_interrupt - .endr - .org TBR_TT_BREAK >> 2 - .long 0 - - # miscellaneous kernel mode entry points - .section .trap.kernel - .org TBR_TT_TRAP0 - bra __entry_kernel_softprog_interrupt - .org TBR_TT_TRAP1 - bra __entry_kernel_softprog_interrupt - - # trap #2 in kernel - reenable interrupts - .org TBR_TT_TRAP2 - bra __entry_kernel_external_interrupt_virtual_reenable - - # miscellaneous kernel traps - .org TBR_TT_TRAP3 - .rept 124 - bra __entry_kernel_softprog_interrupt - .long 0,0,0 - .endr - .org TBR_TT_BREAK - bra __entry_break - .long 0,0,0 - - .section .trap.fixup.kernel - .org TBR_TT_TRAP0 >> 2 - .long __break_step_kernel_softprog_interrupt - .long __break_step_kernel_softprog_interrupt - .long __break_step_kernel_external_interrupt_virtual_reenable - .rept 124 - .long __break_step_kernel_softprog_interrupt - .endr - .org TBR_TT_BREAK >> 2 - .long 0 - - # miscellaneous debug mode entry points - .section .trap.break - .org TBR_TT_BREAK - movsg bpcsr,gr30 - jmpl @(gr30,gr0) - - # miscellaneous vectors - .section .trap.vector - .org TBR_TT_TRAP0 >> 2 - .long system_call - .rept 119 - .long __entry_unsupported_trap - .endr - - # userspace atomic op emulation, traps 120-126 - .rept 7 - .long __entry_atomic_op - .endr - - .org TBR_TT_BREAK >> 2 - .long __entry_debug_exception diff --git a/arch/frv/kernel/entry.S b/arch/frv/kernel/entry.S deleted file mode 100644 index dfcd263c0517..000000000000 --- a/arch/frv/kernel/entry.S +++ /dev/null @@ -1,1519 +0,0 @@ -/* entry.S: FR-V entry - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * - * Entry to the kernel is "interesting": - * (1) There are no stack pointers, not even for the kernel - * (2) General Registers should not be clobbered - * (3) There are no kernel-only data registers - * (4) Since all addressing modes are wrt to a General Register, no global - * variables can be reached - * - * We deal with this by declaring that we shall kill GR28 on entering the - * kernel from userspace - * - * However, since break interrupts can interrupt the CPU even when PSR.ET==0, - * they can't rely on GR28 to be anything useful, and so need to clobber a - * separate register (GR31). Break interrupts are managed in break.S - * - * GR29 _is_ saved, and holds the current task pointer globally - * - */ - -#include <linux/linkage.h> -#include <asm/thread_info.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/ptrace.h> -#include <asm/errno.h> -#include <asm/cache.h> -#include <asm/spr-regs.h> - -#define nr_syscalls ((syscall_table_size)/4) - - .section .text..entry - .balign 4 - -.macro LEDS val -# sethi.p %hi(0xe1200004),gr30 -# setlo %lo(0xe1200004),gr30 -# setlos #~\val,gr31 -# st gr31,@(gr30,gr0) -# sethi.p %hi(0xffc00100),gr30 -# setlo %lo(0xffc00100),gr30 -# sth gr0,@(gr30,gr0) -# membar -.endm - -.macro LEDS32 -# not gr31,gr31 -# sethi.p %hi(0xe1200004),gr30 -# setlo %lo(0xe1200004),gr30 -# st.p gr31,@(gr30,gr0) -# srli gr31,#16,gr31 -# sethi.p %hi(0xffc00100),gr30 -# setlo %lo(0xffc00100),gr30 -# sth gr31,@(gr30,gr0) -# membar -.endm - -############################################################################### -# -# entry point for External interrupts received whilst executing userspace code -# -############################################################################### - .globl __entry_uspace_external_interrupt - .type __entry_uspace_external_interrupt,@function -__entry_uspace_external_interrupt: - LEDS 0x6200 - sethi.p %hi(__kernel_frame0_ptr),gr28 - setlo %lo(__kernel_frame0_ptr),gr28 - ldi @(gr28,#0),gr28 - - # handle h/w single-step through exceptions - sti gr0,@(gr28,#REG__STATUS) - - .globl __entry_uspace_external_interrupt_reentry -__entry_uspace_external_interrupt_reentry: - LEDS 0x6201 - - setlos #REG__END,gr30 - dcpl gr28,gr30,#0 - - # finish building the exception frame - sti sp, @(gr28,#REG_SP) - stdi gr2, @(gr28,#REG_GR(2)) - stdi gr4, @(gr28,#REG_GR(4)) - stdi gr6, @(gr28,#REG_GR(6)) - stdi gr8, @(gr28,#REG_GR(8)) - stdi gr10,@(gr28,#REG_GR(10)) - stdi gr12,@(gr28,#REG_GR(12)) - stdi gr14,@(gr28,#REG_GR(14)) - stdi gr16,@(gr28,#REG_GR(16)) - stdi gr18,@(gr28,#REG_GR(18)) - stdi gr20,@(gr28,#REG_GR(20)) - stdi gr22,@(gr28,#REG_GR(22)) - stdi gr24,@(gr28,#REG_GR(24)) - stdi gr26,@(gr28,#REG_GR(26)) - sti gr0, @(gr28,#REG_GR(28)) - sti gr29,@(gr28,#REG_GR(29)) - stdi.p gr30,@(gr28,#REG_GR(30)) - - # set up the kernel stack pointer - ori gr28,0,sp - - movsg tbr ,gr20 - movsg psr ,gr22 - movsg pcsr,gr21 - movsg isr ,gr23 - movsg ccr ,gr24 - movsg cccr,gr25 - movsg lr ,gr26 - movsg lcr ,gr27 - - setlos.p #-1,gr4 - andi gr22,#PSR_PS,gr5 /* try to rebuild original PSR value */ - andi.p gr22,#~(PSR_PS|PSR_S),gr6 - slli gr5,#1,gr5 - or gr6,gr5,gr5 - andi gr5,#~PSR_ET,gr5 - - sti gr20,@(gr28,#REG_TBR) - sti gr21,@(gr28,#REG_PC) - sti gr5 ,@(gr28,#REG_PSR) - sti gr23,@(gr28,#REG_ISR) - stdi gr24,@(gr28,#REG_CCR) - stdi gr26,@(gr28,#REG_LR) - sti gr4 ,@(gr28,#REG_SYSCALLNO) - - movsg iacc0h,gr4 - movsg iacc0l,gr5 - stdi gr4,@(gr28,#REG_IACC0) - - movsg gner0,gr4 - movsg gner1,gr5 - stdi.p gr4,@(gr28,#REG_GNER0) - - # interrupts start off fully disabled in the interrupt handler - subcc gr0,gr0,gr0,icc2 /* set Z and clear C */ - - # set up kernel global registers - sethi.p %hi(__kernel_current_task),gr5 - setlo %lo(__kernel_current_task),gr5 - sethi.p %hi(_gp),gr16 - setlo %lo(_gp),gr16 - ldi @(gr5,#0),gr29 - ldi.p @(gr29,#4),gr15 ; __current_thread_info = current->thread_info - - # make sure we (the kernel) get div-zero and misalignment exceptions - setlos #ISR_EDE|ISR_DTT_DIVBYZERO|ISR_EMAM_EXCEPTION,gr5 - movgs gr5,isr - - # switch to the kernel trap table - sethi.p %hi(__entry_kerneltrap_table),gr6 - setlo %lo(__entry_kerneltrap_table),gr6 - movgs gr6,tbr - - # set the return address - sethi.p %hi(__entry_return_from_user_interrupt),gr4 - setlo %lo(__entry_return_from_user_interrupt),gr4 - movgs gr4,lr - - # raise the minimum interrupt priority to 15 (NMI only) and enable exceptions - movsg psr,gr4 - - ori gr4,#PSR_PIL_14,gr4 - movgs gr4,psr - ori gr4,#PSR_PIL_14|PSR_ET,gr4 - movgs gr4,psr - - LEDS 0x6202 - bra do_IRQ - - .size __entry_uspace_external_interrupt,.-__entry_uspace_external_interrupt - -############################################################################### -# -# entry point for External interrupts received whilst executing kernel code -# - on arriving here, the following registers should already be set up: -# GR15 - current thread_info struct pointer -# GR16 - kernel GP-REL pointer -# GR29 - current task struct pointer -# TBR - kernel trap vector table -# ISR - kernel's preferred integer controls -# -############################################################################### - .globl __entry_kernel_external_interrupt - .type __entry_kernel_external_interrupt,@function -__entry_kernel_external_interrupt: - LEDS 0x6210 -// sub sp,gr15,gr31 -// LEDS32 - - # set up the stack pointer - or.p sp,gr0,gr30 - subi sp,#REG__END,sp - sti gr30,@(sp,#REG_SP) - - # handle h/w single-step through exceptions - sti gr0,@(sp,#REG__STATUS) - - .globl __entry_kernel_external_interrupt_reentry -__entry_kernel_external_interrupt_reentry: - LEDS 0x6211 - - # set up the exception frame - setlos #REG__END,gr30 - dcpl sp,gr30,#0 - - sti.p gr28,@(sp,#REG_GR(28)) - ori sp,0,gr28 - - # finish building the exception frame - stdi gr2,@(gr28,#REG_GR(2)) - stdi gr4,@(gr28,#REG_GR(4)) - stdi gr6,@(gr28,#REG_GR(6)) - stdi gr8,@(gr28,#REG_GR(8)) - stdi gr10,@(gr28,#REG_GR(10)) - stdi gr12,@(gr28,#REG_GR(12)) - stdi gr14,@(gr28,#REG_GR(14)) - stdi gr16,@(gr28,#REG_GR(16)) - stdi gr18,@(gr28,#REG_GR(18)) - stdi gr20,@(gr28,#REG_GR(20)) - stdi gr22,@(gr28,#REG_GR(22)) - stdi gr24,@(gr28,#REG_GR(24)) - stdi gr26,@(gr28,#REG_GR(26)) - sti gr29,@(gr28,#REG_GR(29)) - stdi.p gr30,@(gr28,#REG_GR(30)) - - # note virtual interrupts will be fully enabled upon return - subicc gr0,#1,gr0,icc2 /* clear Z, set C */ - - movsg tbr ,gr20 - movsg psr ,gr22 - movsg pcsr,gr21 - movsg isr ,gr23 - movsg ccr ,gr24 - movsg cccr,gr25 - movsg lr ,gr26 - movsg lcr ,gr27 - - setlos.p #-1,gr4 - andi gr22,#PSR_PS,gr5 /* try to rebuild original PSR value */ - andi.p gr22,#~(PSR_PS|PSR_S),gr6 - slli gr5,#1,gr5 - or gr6,gr5,gr5 - andi.p gr5,#~PSR_ET,gr5 - - # set CCCR.CC3 to Undefined to abort atomic-modify completion inside the kernel - # - for an explanation of how it works, see: Documentation/frv/atomic-ops.txt - andi gr25,#~0xc0,gr25 - - sti gr20,@(gr28,#REG_TBR) - sti gr21,@(gr28,#REG_PC) - sti gr5 ,@(gr28,#REG_PSR) - sti gr23,@(gr28,#REG_ISR) - stdi gr24,@(gr28,#REG_CCR) - stdi gr26,@(gr28,#REG_LR) - sti gr4 ,@(gr28,#REG_SYSCALLNO) - - movsg iacc0h,gr4 - movsg iacc0l,gr5 - stdi gr4,@(gr28,#REG_IACC0) - - movsg gner0,gr4 - movsg gner1,gr5 - stdi.p gr4,@(gr28,#REG_GNER0) - - # interrupts start off fully disabled in the interrupt handler - subcc gr0,gr0,gr0,icc2 /* set Z and clear C */ - - # set the return address - sethi.p %hi(__entry_return_from_kernel_interrupt),gr4 - setlo %lo(__entry_return_from_kernel_interrupt),gr4 - movgs gr4,lr - - # clear power-saving mode flags - movsg hsr0,gr4 - andi gr4,#~HSR0_PDM,gr4 - movgs gr4,hsr0 - - # raise the minimum interrupt priority to 15 (NMI only) and enable exceptions - movsg psr,gr4 - ori gr4,#PSR_PIL_14,gr4 - movgs gr4,psr - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - - LEDS 0x6212 - bra do_IRQ - - .size __entry_kernel_external_interrupt,.-__entry_kernel_external_interrupt - -############################################################################### -# -# deal with interrupts that were actually virtually disabled -# - we need to really disable them, flag the fact and return immediately -# - if you change this, you must alter break.S also -# -############################################################################### - .balign L1_CACHE_BYTES - .globl __entry_kernel_external_interrupt_virtually_disabled - .type __entry_kernel_external_interrupt_virtually_disabled,@function -__entry_kernel_external_interrupt_virtually_disabled: - movsg psr,gr30 - andi gr30,#~PSR_PIL,gr30 - ori gr30,#PSR_PIL_14,gr30 ; debugging interrupts only - movgs gr30,psr - subcc gr0,gr0,gr0,icc2 ; leave Z set, clear C - rett #0 - - .size __entry_kernel_external_interrupt_virtually_disabled,.-__entry_kernel_external_interrupt_virtually_disabled - -############################################################################### -# -# deal with re-enablement of interrupts that were pending when virtually re-enabled -# - set ICC2.C, re-enable the real interrupts and return -# - we can clear ICC2.Z because we shouldn't be here if it's not 0 [due to TIHI] -# - if you change this, you must alter break.S also -# -############################################################################### - .balign L1_CACHE_BYTES - .globl __entry_kernel_external_interrupt_virtual_reenable - .type __entry_kernel_external_interrupt_virtual_reenable,@function -__entry_kernel_external_interrupt_virtual_reenable: - movsg psr,gr30 - andi gr30,#~PSR_PIL,gr30 ; re-enable interrupts - movgs gr30,psr - subicc gr0,#1,gr0,icc2 ; clear Z, set C - rett #0 - - .size __entry_kernel_external_interrupt_virtual_reenable,.-__entry_kernel_external_interrupt_virtual_reenable - -############################################################################### -# -# entry point for Software and Progam interrupts generated whilst executing userspace code -# -############################################################################### - .globl __entry_uspace_softprog_interrupt - .type __entry_uspace_softprog_interrupt,@function - .globl __entry_uspace_handle_mmu_fault -__entry_uspace_softprog_interrupt: - LEDS 0x6000 -#ifdef CONFIG_MMU - movsg ear0,gr28 -__entry_uspace_handle_mmu_fault: - movgs gr28,scr2 -#endif - sethi.p %hi(__kernel_frame0_ptr),gr28 - setlo %lo(__kernel_frame0_ptr),gr28 - ldi @(gr28,#0),gr28 - - # handle h/w single-step through exceptions - sti gr0,@(gr28,#REG__STATUS) - - .globl __entry_uspace_softprog_interrupt_reentry -__entry_uspace_softprog_interrupt_reentry: - LEDS 0x6001 - - setlos #REG__END,gr30 - dcpl gr28,gr30,#0 - - # set up the kernel stack pointer - sti.p sp,@(gr28,#REG_SP) - ori gr28,0,sp - sti gr0,@(gr28,#REG_GR(28)) - - stdi gr20,@(gr28,#REG_GR(20)) - stdi gr22,@(gr28,#REG_GR(22)) - - movsg tbr,gr20 - movsg pcsr,gr21 - movsg psr,gr22 - - sethi.p %hi(__entry_return_from_user_exception),gr23 - setlo %lo(__entry_return_from_user_exception),gr23 - - bra __entry_common - - .size __entry_uspace_softprog_interrupt,.-__entry_uspace_softprog_interrupt - - # single-stepping was disabled on entry to a TLB handler that then faulted -#ifdef CONFIG_MMU - .globl __entry_uspace_handle_mmu_fault_sstep -__entry_uspace_handle_mmu_fault_sstep: - movgs gr28,scr2 - sethi.p %hi(__kernel_frame0_ptr),gr28 - setlo %lo(__kernel_frame0_ptr),gr28 - ldi @(gr28,#0),gr28 - - # flag single-step re-enablement - sti gr0,@(gr28,#REG__STATUS) - bra __entry_uspace_softprog_interrupt_reentry -#endif - - -############################################################################### -# -# entry point for Software and Progam interrupts generated whilst executing kernel code -# -############################################################################### - .globl __entry_kernel_softprog_interrupt - .type __entry_kernel_softprog_interrupt,@function -__entry_kernel_softprog_interrupt: - LEDS 0x6004 - -#ifdef CONFIG_MMU - movsg ear0,gr30 - movgs gr30,scr2 -#endif - - .globl __entry_kernel_handle_mmu_fault -__entry_kernel_handle_mmu_fault: - # set up the stack pointer - subi sp,#REG__END,sp - sti sp,@(sp,#REG_SP) - sti sp,@(sp,#REG_SP-4) - andi sp,#~7,sp - - # handle h/w single-step through exceptions - sti gr0,@(sp,#REG__STATUS) - - .globl __entry_kernel_softprog_interrupt_reentry -__entry_kernel_softprog_interrupt_reentry: - LEDS 0x6005 - - setlos #REG__END,gr30 - dcpl sp,gr30,#0 - - # set up the exception frame - sti.p gr28,@(sp,#REG_GR(28)) - ori sp,0,gr28 - - stdi gr20,@(gr28,#REG_GR(20)) - stdi gr22,@(gr28,#REG_GR(22)) - - ldi @(sp,#REG_SP),gr22 /* reconstruct the old SP */ - addi gr22,#REG__END,gr22 - sti gr22,@(sp,#REG_SP) - - # set CCCR.CC3 to Undefined to abort atomic-modify completion inside the kernel - # - for an explanation of how it works, see: Documentation/frv/atomic-ops.txt - movsg cccr,gr20 - andi gr20,#~0xc0,gr20 - movgs gr20,cccr - - movsg tbr,gr20 - movsg pcsr,gr21 - movsg psr,gr22 - - sethi.p %hi(__entry_return_from_kernel_exception),gr23 - setlo %lo(__entry_return_from_kernel_exception),gr23 - bra __entry_common - - .size __entry_kernel_softprog_interrupt,.-__entry_kernel_softprog_interrupt - - # single-stepping was disabled on entry to a TLB handler that then faulted -#ifdef CONFIG_MMU - .globl __entry_kernel_handle_mmu_fault_sstep -__entry_kernel_handle_mmu_fault_sstep: - # set up the stack pointer - subi sp,#REG__END,sp - sti sp,@(sp,#REG_SP) - sti sp,@(sp,#REG_SP-4) - andi sp,#~7,sp - - # flag single-step re-enablement - sethi #REG__STATUS_STEP,gr30 - sti gr30,@(sp,#REG__STATUS) - bra __entry_kernel_softprog_interrupt_reentry -#endif - - -############################################################################### -# -# the rest of the kernel entry point code -# - on arriving here, the following registers should be set up: -# GR1 - kernel stack pointer -# GR7 - syscall number (trap 0 only) -# GR8-13 - syscall args (trap 0 only) -# GR20 - saved TBR -# GR21 - saved PC -# GR22 - saved PSR -# GR23 - return handler address -# GR28 - exception frame on stack -# SCR2 - saved EAR0 where applicable (clobbered by ICI & ICEF insns on FR451) -# PSR - PSR.S 1, PSR.ET 0 -# -############################################################################### - .globl __entry_common - .type __entry_common,@function -__entry_common: - LEDS 0x6008 - - # finish building the exception frame - stdi gr2,@(gr28,#REG_GR(2)) - stdi gr4,@(gr28,#REG_GR(4)) - stdi gr6,@(gr28,#REG_GR(6)) - stdi gr8,@(gr28,#REG_GR(8)) - stdi gr10,@(gr28,#REG_GR(10)) - stdi gr12,@(gr28,#REG_GR(12)) - stdi gr14,@(gr28,#REG_GR(14)) - stdi gr16,@(gr28,#REG_GR(16)) - stdi gr18,@(gr28,#REG_GR(18)) - stdi gr24,@(gr28,#REG_GR(24)) - stdi gr26,@(gr28,#REG_GR(26)) - sti gr29,@(gr28,#REG_GR(29)) - stdi gr30,@(gr28,#REG_GR(30)) - - movsg lcr ,gr27 - movsg lr ,gr26 - movgs gr23,lr - movsg cccr,gr25 - movsg ccr ,gr24 - movsg isr ,gr23 - - setlos.p #-1,gr4 - andi gr22,#PSR_PS,gr5 /* try to rebuild original PSR value */ - andi.p gr22,#~(PSR_PS|PSR_S),gr6 - slli gr5,#1,gr5 - or gr6,gr5,gr5 - andi gr5,#~PSR_ET,gr5 - - sti gr20,@(gr28,#REG_TBR) - sti gr21,@(gr28,#REG_PC) - sti gr5 ,@(gr28,#REG_PSR) - sti gr23,@(gr28,#REG_ISR) - stdi gr24,@(gr28,#REG_CCR) - stdi gr26,@(gr28,#REG_LR) - sti gr4 ,@(gr28,#REG_SYSCALLNO) - - movsg iacc0h,gr4 - movsg iacc0l,gr5 - stdi gr4,@(gr28,#REG_IACC0) - - movsg gner0,gr4 - movsg gner1,gr5 - stdi.p gr4,@(gr28,#REG_GNER0) - - # set up virtual interrupt disablement - subicc gr0,#1,gr0,icc2 /* clear Z flag, set C flag */ - - # set up kernel global registers - sethi.p %hi(__kernel_current_task),gr5 - setlo %lo(__kernel_current_task),gr5 - sethi.p %hi(_gp),gr16 - setlo %lo(_gp),gr16 - ldi @(gr5,#0),gr29 - ldi @(gr29,#4),gr15 ; __current_thread_info = current->thread_info - - # switch to the kernel trap table - sethi.p %hi(__entry_kerneltrap_table),gr6 - setlo %lo(__entry_kerneltrap_table),gr6 - movgs gr6,tbr - - # make sure we (the kernel) get div-zero and misalignment exceptions - setlos #ISR_EDE|ISR_DTT_DIVBYZERO|ISR_EMAM_EXCEPTION,gr5 - movgs gr5,isr - - # clear power-saving mode flags - movsg hsr0,gr4 - andi gr4,#~HSR0_PDM,gr4 - movgs gr4,hsr0 - - # multiplex again using old TBR as a guide - setlos.p #TBR_TT,gr3 - sethi %hi(__entry_vector_table),gr6 - and.p gr20,gr3,gr5 - setlo %lo(__entry_vector_table),gr6 - srli gr5,#2,gr5 - ld @(gr5,gr6),gr5 - - LEDS 0x6009 - jmpl @(gr5,gr0) - - - .size __entry_common,.-__entry_common - -############################################################################### -# -# handle instruction MMU fault -# -############################################################################### -#ifdef CONFIG_MMU - .globl __entry_insn_mmu_fault -__entry_insn_mmu_fault: - LEDS 0x6010 - setlos #0,gr8 - movsg esr0,gr9 - movsg scr2,gr10 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - - sethi.p %hi(do_page_fault),gr5 - setlo %lo(do_page_fault),gr5 - jmpl @(gr5,gr0) ; call do_page_fault(0,esr0,ear0) -#endif - - -############################################################################### -# -# handle instruction access error -# -############################################################################### - .globl __entry_insn_access_error -__entry_insn_access_error: - LEDS 0x6011 - sethi.p %hi(insn_access_error),gr5 - setlo %lo(insn_access_error),gr5 - movsg esfr1,gr8 - movsg epcr0,gr9 - movsg esr0,gr10 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - jmpl @(gr5,gr0) ; call insn_access_error(esfr1,epcr0,esr0) - -############################################################################### -# -# handle various instructions of dubious legality -# -############################################################################### - .globl __entry_unsupported_trap - .globl __entry_illegal_instruction - .globl __entry_privileged_instruction - .globl __entry_debug_exception -__entry_unsupported_trap: - subi gr21,#4,gr21 - sti gr21,@(gr28,#REG_PC) -__entry_illegal_instruction: -__entry_privileged_instruction: -__entry_debug_exception: - LEDS 0x6012 - sethi.p %hi(illegal_instruction),gr5 - setlo %lo(illegal_instruction),gr5 - movsg esfr1,gr8 - movsg epcr0,gr9 - movsg esr0,gr10 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - jmpl @(gr5,gr0) ; call ill_insn(esfr1,epcr0,esr0) - -############################################################################### -# -# handle atomic operation emulation for userspace -# -############################################################################### - .globl __entry_atomic_op -__entry_atomic_op: - LEDS 0x6012 - sethi.p %hi(atomic_operation),gr5 - setlo %lo(atomic_operation),gr5 - movsg esfr1,gr8 - movsg epcr0,gr9 - movsg esr0,gr10 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - jmpl @(gr5,gr0) ; call atomic_operation(esfr1,epcr0,esr0) - -############################################################################### -# -# handle media exception -# -############################################################################### - .globl __entry_media_exception -__entry_media_exception: - LEDS 0x6013 - sethi.p %hi(media_exception),gr5 - setlo %lo(media_exception),gr5 - movsg msr0,gr8 - movsg msr1,gr9 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - jmpl @(gr5,gr0) ; call media_excep(msr0,msr1) - -############################################################################### -# -# handle data MMU fault -# handle data DAT fault (write-protect exception) -# -############################################################################### -#ifdef CONFIG_MMU - .globl __entry_data_mmu_fault -__entry_data_mmu_fault: - .globl __entry_data_dat_fault -__entry_data_dat_fault: - LEDS 0x6014 - setlos #1,gr8 - movsg esr0,gr9 - movsg scr2,gr10 ; saved EAR0 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - - sethi.p %hi(do_page_fault),gr5 - setlo %lo(do_page_fault),gr5 - jmpl @(gr5,gr0) ; call do_page_fault(1,esr0,ear0) -#endif - -############################################################################### -# -# handle data and instruction access exceptions -# -############################################################################### - .globl __entry_insn_access_exception - .globl __entry_data_access_exception -__entry_insn_access_exception: -__entry_data_access_exception: - LEDS 0x6016 - sethi.p %hi(memory_access_exception),gr5 - setlo %lo(memory_access_exception),gr5 - movsg esr0,gr8 - movsg scr2,gr9 ; saved EAR0 - movsg epcr0,gr10 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - jmpl @(gr5,gr0) ; call memory_access_error(esr0,ear0,epcr0) - -############################################################################### -# -# handle data access error -# -############################################################################### - .globl __entry_data_access_error -__entry_data_access_error: - LEDS 0x6016 - sethi.p %hi(data_access_error),gr5 - setlo %lo(data_access_error),gr5 - movsg esfr1,gr8 - movsg esr15,gr9 - movsg ear15,gr10 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - jmpl @(gr5,gr0) ; call data_access_error(esfr1,esr15,ear15) - -############################################################################### -# -# handle data store error -# -############################################################################### - .globl __entry_data_store_error -__entry_data_store_error: - LEDS 0x6017 - sethi.p %hi(data_store_error),gr5 - setlo %lo(data_store_error),gr5 - movsg esfr1,gr8 - movsg esr14,gr9 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - jmpl @(gr5,gr0) ; call data_store_error(esfr1,esr14) - -############################################################################### -# -# handle division exception -# -############################################################################### - .globl __entry_division_exception -__entry_division_exception: - LEDS 0x6018 - sethi.p %hi(division_exception),gr5 - setlo %lo(division_exception),gr5 - movsg esfr1,gr8 - movsg esr0,gr9 - movsg isr,gr10 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - jmpl @(gr5,gr0) ; call div_excep(esfr1,esr0,isr) - -############################################################################### -# -# handle compound exception -# -############################################################################### - .globl __entry_compound_exception -__entry_compound_exception: - LEDS 0x6019 - sethi.p %hi(compound_exception),gr5 - setlo %lo(compound_exception),gr5 - movsg esfr1,gr8 - movsg esr0,gr9 - movsg esr14,gr10 - movsg esr15,gr11 - movsg msr0,gr12 - movsg msr1,gr13 - - # now that we've accessed the exception regs, we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - jmpl @(gr5,gr0) ; call comp_excep(esfr1,esr0,esr14,esr15,msr0,msr1) - -############################################################################### -# -# handle interrupts and NMIs -# -############################################################################### - .globl __entry_do_IRQ -__entry_do_IRQ: - LEDS 0x6020 - - # we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - bra do_IRQ - - .globl __entry_do_NMI -__entry_do_NMI: - LEDS 0x6021 - - # we can enable exceptions - movsg psr,gr4 - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - bra do_NMI - -############################################################################### -# -# the return path for a newly forked child process -# - __switch_to() saved the old current pointer in GR8 for us -# -############################################################################### - .globl ret_from_fork -ret_from_fork: - LEDS 0x6100 - call schedule_tail - - # fork & co. return 0 to child - setlos.p #0,gr8 - bra __syscall_exit - - .globl ret_from_kernel_thread -ret_from_kernel_thread: - lddi.p @(gr28,#REG_GR(8)),gr20 - call schedule_tail - calll.p @(gr21,gr0) - or gr20,gr20,gr8 - bra __syscall_exit - -################################################################################################### -# -# Return to user mode is not as complex as all this looks, -# but we want the default path for a system call return to -# go as quickly as possible which is why some of this is -# less clear than it otherwise should be. -# -################################################################################################### - .balign L1_CACHE_BYTES - .globl system_call -system_call: - LEDS 0x6101 - movsg psr,gr4 ; enable exceptions - ori gr4,#PSR_ET,gr4 - movgs gr4,psr - - sti gr7,@(gr28,#REG_SYSCALLNO) - sti.p gr8,@(gr28,#REG_ORIG_GR8) - - subicc gr7,#nr_syscalls,gr0,icc0 - bnc icc0,#0,__syscall_badsys - - ldi @(gr15,#TI_FLAGS),gr4 - andicc gr4,#_TIF_SYSCALL_TRACE,gr0,icc0 - bne icc0,#0,__syscall_trace_entry - -__syscall_call: - slli.p gr7,#2,gr7 - sethi %hi(sys_call_table),gr5 - setlo %lo(sys_call_table),gr5 - ld @(gr5,gr7),gr4 - calll @(gr4,gr0) - - -############################################################################### -# -# return to interrupted process -# -############################################################################### -__syscall_exit: - LEDS 0x6300 - - # keep current PSR in GR23 - movsg psr,gr23 - - ldi @(gr28,#REG_PSR),gr22 - - sti.p gr8,@(gr28,#REG_GR(8)) ; save return value - - # rebuild saved psr - execve will change it for init/main.c - srli gr22,#1,gr5 - andi.p gr22,#~PSR_PS,gr22 - andi gr5,#PSR_PS,gr5 - or gr5,gr22,gr22 - ori.p gr22,#PSR_S,gr22 - - # make sure we don't miss an interrupt setting need_resched or sigpending between - # sampling and the RETT - ori gr23,#PSR_PIL_14,gr23 - movgs gr23,psr - - ldi @(gr15,#TI_FLAGS),gr4 - andicc gr4,#_TIF_ALLWORK_MASK,gr0,icc0 - bne icc0,#0,__syscall_exit_work - - # restore all registers and return -__entry_return_direct: - LEDS 0x6301 - - andi gr22,#~PSR_ET,gr22 - movgs gr22,psr - - ldi @(gr28,#REG_ISR),gr23 - lddi @(gr28,#REG_CCR),gr24 - lddi @(gr28,#REG_LR) ,gr26 - ldi @(gr28,#REG_PC) ,gr21 - ldi @(gr28,#REG_TBR),gr20 - - movgs gr20,tbr - movgs gr21,pcsr - movgs gr23,isr - movgs gr24,ccr - movgs gr25,cccr - movgs gr26,lr - movgs gr27,lcr - - lddi @(gr28,#REG_GNER0),gr4 - movgs gr4,gner0 - movgs gr5,gner1 - - lddi @(gr28,#REG_IACC0),gr4 - movgs gr4,iacc0h - movgs gr5,iacc0l - - lddi @(gr28,#REG_GR(4)) ,gr4 - lddi @(gr28,#REG_GR(6)) ,gr6 - lddi @(gr28,#REG_GR(8)) ,gr8 - lddi @(gr28,#REG_GR(10)),gr10 - lddi @(gr28,#REG_GR(12)),gr12 - lddi @(gr28,#REG_GR(14)),gr14 - lddi @(gr28,#REG_GR(16)),gr16 - lddi @(gr28,#REG_GR(18)),gr18 - lddi @(gr28,#REG_GR(20)),gr20 - lddi @(gr28,#REG_GR(22)),gr22 - lddi @(gr28,#REG_GR(24)),gr24 - lddi @(gr28,#REG_GR(26)),gr26 - ldi @(gr28,#REG_GR(29)),gr29 - lddi @(gr28,#REG_GR(30)),gr30 - - # check to see if a debugging return is required - LEDS 0x67f0 - movsg ccr,gr2 - ldi @(gr28,#REG__STATUS),gr3 - andicc gr3,#REG__STATUS_STEP,gr0,icc0 - bne icc0,#0,__entry_return_singlestep - movgs gr2,ccr - - ldi @(gr28,#REG_SP) ,sp - lddi @(gr28,#REG_GR(2)) ,gr2 - ldi @(gr28,#REG_GR(28)),gr28 - - LEDS 0x67fe -// movsg pcsr,gr31 -// LEDS32 - -#if 0 - # store the current frame in the workram on the FR451 - movgs gr28,scr2 - sethi.p %hi(0xfe800000),gr28 - setlo %lo(0xfe800000),gr28 - - stdi gr2,@(gr28,#REG_GR(2)) - stdi gr4,@(gr28,#REG_GR(4)) - stdi gr6,@(gr28,#REG_GR(6)) - stdi gr8,@(gr28,#REG_GR(8)) - stdi gr10,@(gr28,#REG_GR(10)) - stdi gr12,@(gr28,#REG_GR(12)) - stdi gr14,@(gr28,#REG_GR(14)) - stdi gr16,@(gr28,#REG_GR(16)) - stdi gr18,@(gr28,#REG_GR(18)) - stdi gr24,@(gr28,#REG_GR(24)) - stdi gr26,@(gr28,#REG_GR(26)) - sti gr29,@(gr28,#REG_GR(29)) - stdi gr30,@(gr28,#REG_GR(30)) - - movsg tbr ,gr30 - sti gr30,@(gr28,#REG_TBR) - movsg pcsr,gr30 - sti gr30,@(gr28,#REG_PC) - movsg psr ,gr30 - sti gr30,@(gr28,#REG_PSR) - movsg isr ,gr30 - sti gr30,@(gr28,#REG_ISR) - movsg ccr ,gr30 - movsg cccr,gr31 - stdi gr30,@(gr28,#REG_CCR) - movsg lr ,gr30 - movsg lcr ,gr31 - stdi gr30,@(gr28,#REG_LR) - sti gr0 ,@(gr28,#REG_SYSCALLNO) - movsg scr2,gr28 -#endif - - rett #0 - - # return via break.S -__entry_return_singlestep: - movgs gr2,ccr - lddi @(gr28,#REG_GR(2)) ,gr2 - ldi @(gr28,#REG_SP) ,sp - ldi @(gr28,#REG_GR(28)),gr28 - LEDS 0x67ff - break - .globl __entry_return_singlestep_breaks_here -__entry_return_singlestep_breaks_here: - nop - - -############################################################################### -# -# return to a process interrupted in kernel space -# - we need to consider preemption if that is enabled -# -############################################################################### - .balign L1_CACHE_BYTES -__entry_return_from_kernel_exception: - LEDS 0x6302 - movsg psr,gr23 - ori gr23,#PSR_PIL_14,gr23 - movgs gr23,psr - bra __entry_return_direct - - .balign L1_CACHE_BYTES -__entry_return_from_kernel_interrupt: - LEDS 0x6303 - movsg psr,gr23 - ori gr23,#PSR_PIL_14,gr23 - movgs gr23,psr - -#ifdef CONFIG_PREEMPT - ldi @(gr15,#TI_PRE_COUNT),gr5 - subicc gr5,#0,gr0,icc0 - beq icc0,#0,__entry_return_direct - - subcc gr0,gr0,gr0,icc2 /* set Z and clear C */ - call preempt_schedule_irq -#endif - bra __entry_return_direct - - -############################################################################### -# -# perform work that needs to be done immediately before resumption -# -############################################################################### - .globl __entry_return_from_user_exception - .balign L1_CACHE_BYTES -__entry_return_from_user_exception: - LEDS 0x6501 - -__entry_resume_userspace: - # make sure we don't miss an interrupt setting need_resched or sigpending between - # sampling and the RETT - movsg psr,gr23 - ori gr23,#PSR_PIL_14,gr23 - movgs gr23,psr - -__entry_return_from_user_interrupt: - LEDS 0x6402 - ldi @(gr15,#TI_FLAGS),gr4 - andicc gr4,#_TIF_WORK_MASK,gr0,icc0 - beq icc0,#1,__entry_return_direct - -__entry_work_pending: - LEDS 0x6404 - andicc gr4,#_TIF_NEED_RESCHED,gr0,icc0 - beq icc0,#1,__entry_work_notifysig - -__entry_work_resched: - LEDS 0x6408 - movsg psr,gr23 - andi gr23,#~PSR_PIL,gr23 - movgs gr23,psr - call schedule - movsg psr,gr23 - ori gr23,#PSR_PIL_14,gr23 - movgs gr23,psr - - LEDS 0x6401 - ldi @(gr15,#TI_FLAGS),gr4 - andicc gr4,#_TIF_WORK_MASK,gr0,icc0 - beq icc0,#1,__entry_return_direct - andicc gr4,#_TIF_NEED_RESCHED,gr0,icc0 - bne icc0,#1,__entry_work_resched - -__entry_work_notifysig: - LEDS 0x6410 - ori.p gr4,#0,gr8 - call do_notify_resume - bra __entry_resume_userspace - - # perform syscall entry tracing -__syscall_trace_entry: - LEDS 0x6320 - call syscall_trace_entry - - lddi.p @(gr28,#REG_GR(8)) ,gr8 - ori gr8,#0,gr7 ; syscall_trace_entry() returned new syscallno - lddi @(gr28,#REG_GR(10)),gr10 - lddi.p @(gr28,#REG_GR(12)),gr12 - - subicc gr7,#nr_syscalls,gr0,icc0 - bnc icc0,#0,__syscall_badsys - bra __syscall_call - - # perform syscall exit tracing -__syscall_exit_work: - LEDS 0x6340 - andicc gr22,#PSR_PS,gr0,icc1 ; don't handle on return to kernel mode - andicc.p gr4,#_TIF_SYSCALL_TRACE,gr0,icc0 - bne icc1,#0,__entry_return_direct - beq icc0,#1,__entry_work_pending - - movsg psr,gr23 - andi gr23,#~PSR_PIL,gr23 ; could let syscall_trace_exit() call schedule() - movgs gr23,psr - - call syscall_trace_exit - bra __entry_resume_userspace - -__syscall_badsys: - LEDS 0x6380 - setlos #-ENOSYS,gr8 - sti gr8,@(gr28,#REG_GR(8)) ; save return value - bra __entry_resume_userspace - - -############################################################################### -# -# syscall vector table -# -############################################################################### - .section .rodata -ALIGN - .globl sys_call_table -sys_call_table: - .long sys_restart_syscall /* 0 - old "setup()" system call, used for restarting */ - .long sys_exit - .long sys_fork - .long sys_read - .long sys_write - .long sys_open /* 5 */ - .long sys_close - .long sys_waitpid - .long sys_creat - .long sys_link - .long sys_unlink /* 10 */ - .long sys_execve - .long sys_chdir - .long sys_time - .long sys_mknod - .long sys_chmod /* 15 */ - .long sys_lchown16 - .long sys_ni_syscall /* old break syscall holder */ - .long sys_stat - .long sys_lseek - .long sys_getpid /* 20 */ - .long sys_mount - .long sys_oldumount - .long sys_setuid16 - .long sys_getuid16 - .long sys_ni_syscall // sys_stime /* 25 */ - .long sys_ptrace - .long sys_alarm - .long sys_fstat - .long sys_pause - .long sys_utime /* 30 */ - .long sys_ni_syscall /* old stty syscall holder */ - .long sys_ni_syscall /* old gtty syscall holder */ - .long sys_access - .long sys_nice - .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ - .long sys_sync - .long sys_kill - .long sys_rename - .long sys_mkdir - .long sys_rmdir /* 40 */ - .long sys_dup - .long sys_pipe - .long sys_times - .long sys_ni_syscall /* old prof syscall holder */ - .long sys_brk /* 45 */ - .long sys_setgid16 - .long sys_getgid16 - .long sys_ni_syscall // sys_signal - .long sys_geteuid16 - .long sys_getegid16 /* 50 */ - .long sys_acct - .long sys_umount /* recycled never used phys( */ - .long sys_ni_syscall /* old lock syscall holder */ - .long sys_ioctl - .long sys_fcntl /* 55 */ - .long sys_ni_syscall /* old mpx syscall holder */ - .long sys_setpgid - .long sys_ni_syscall /* old ulimit syscall holder */ - .long sys_ni_syscall /* old old uname syscall */ - .long sys_umask /* 60 */ - .long sys_chroot - .long sys_ustat - .long sys_dup2 - .long sys_getppid - .long sys_getpgrp /* 65 */ - .long sys_setsid - .long sys_sigaction - .long sys_ni_syscall // sys_sgetmask - .long sys_ni_syscall // sys_ssetmask - .long sys_setreuid16 /* 70 */ - .long sys_setregid16 - .long sys_sigsuspend - .long sys_ni_syscall // sys_sigpending - .long sys_sethostname - .long sys_setrlimit /* 75 */ - .long sys_ni_syscall // sys_old_getrlimit - .long sys_getrusage - .long sys_gettimeofday - .long sys_settimeofday - .long sys_getgroups16 /* 80 */ - .long sys_setgroups16 - .long sys_ni_syscall /* old_select slot */ - .long sys_symlink - .long sys_lstat - .long sys_readlink /* 85 */ - .long sys_uselib - .long sys_swapon - .long sys_reboot - .long sys_ni_syscall // old_readdir - .long sys_ni_syscall /* 90 */ /* old_mmap slot */ - .long sys_munmap - .long sys_truncate - .long sys_ftruncate - .long sys_fchmod - .long sys_fchown16 /* 95 */ - .long sys_getpriority - .long sys_setpriority - .long sys_ni_syscall /* old profil syscall holder */ - .long sys_statfs - .long sys_fstatfs /* 100 */ - .long sys_ni_syscall /* ioperm for i386 */ - .long sys_socketcall - .long sys_syslog - .long sys_setitimer - .long sys_getitimer /* 105 */ - .long sys_newstat - .long sys_newlstat - .long sys_newfstat - .long sys_ni_syscall /* obsolete olduname( syscall */ - .long sys_ni_syscall /* iopl for i386 */ /* 110 */ - .long sys_vhangup - .long sys_ni_syscall /* obsolete idle( syscall */ - .long sys_ni_syscall /* vm86old for i386 */ - .long sys_wait4 - .long sys_swapoff /* 115 */ - .long sys_sysinfo - .long sys_ipc - .long sys_fsync - .long sys_sigreturn - .long sys_clone /* 120 */ - .long sys_setdomainname - .long sys_newuname - .long sys_ni_syscall /* old "cacheflush" */ - .long sys_adjtimex - .long sys_mprotect /* 125 */ - .long sys_sigprocmask - .long sys_ni_syscall /* old "create_module" */ - .long sys_init_module - .long sys_delete_module - .long sys_ni_syscall /* old "get_kernel_syms" */ - .long sys_quotactl - .long sys_getpgid - .long sys_fchdir - .long sys_bdflush - .long sys_sysfs /* 135 */ - .long sys_personality - .long sys_ni_syscall /* for afs_syscall */ - .long sys_setfsuid16 - .long sys_setfsgid16 - .long sys_llseek /* 140 */ - .long sys_getdents - .long sys_select - .long sys_flock - .long sys_msync - .long sys_readv /* 145 */ - .long sys_writev - .long sys_getsid - .long sys_fdatasync - .long sys_sysctl - .long sys_mlock /* 150 */ - .long sys_munlock - .long sys_mlockall - .long sys_munlockall - .long sys_sched_setparam - .long sys_sched_getparam /* 155 */ - .long sys_sched_setscheduler - .long sys_sched_getscheduler - .long sys_sched_yield - .long sys_sched_get_priority_max - .long sys_sched_get_priority_min /* 160 */ - .long sys_sched_rr_get_interval - .long sys_nanosleep - .long sys_mremap - .long sys_setresuid16 - .long sys_getresuid16 /* 165 */ - .long sys_ni_syscall /* for vm86 */ - .long sys_ni_syscall /* Old sys_query_module */ - .long sys_poll - .long sys_ni_syscall /* Old nfsservctl */ - .long sys_setresgid16 /* 170 */ - .long sys_getresgid16 - .long sys_prctl - .long sys_rt_sigreturn - .long sys_rt_sigaction - .long sys_rt_sigprocmask /* 175 */ - .long sys_rt_sigpending - .long sys_rt_sigtimedwait - .long sys_rt_sigqueueinfo - .long sys_rt_sigsuspend - .long sys_pread64 /* 180 */ - .long sys_pwrite64 - .long sys_chown16 - .long sys_getcwd - .long sys_capget - .long sys_capset /* 185 */ - .long sys_sigaltstack - .long sys_sendfile - .long sys_ni_syscall /* streams1 */ - .long sys_ni_syscall /* streams2 */ - .long sys_vfork /* 190 */ - .long sys_getrlimit - .long sys_mmap2 - .long sys_truncate64 - .long sys_ftruncate64 - .long sys_stat64 /* 195 */ - .long sys_lstat64 - .long sys_fstat64 - .long sys_lchown - .long sys_getuid - .long sys_getgid /* 200 */ - .long sys_geteuid - .long sys_getegid - .long sys_setreuid - .long sys_setregid - .long sys_getgroups /* 205 */ - .long sys_setgroups - .long sys_fchown - .long sys_setresuid - .long sys_getresuid - .long sys_setresgid /* 210 */ - .long sys_getresgid - .long sys_chown - .long sys_setuid - .long sys_setgid - .long sys_setfsuid /* 215 */ - .long sys_setfsgid - .long sys_pivot_root - .long sys_mincore - .long sys_madvise - .long sys_getdents64 /* 220 */ - .long sys_fcntl64 - .long sys_ni_syscall /* reserved for TUX */ - .long sys_ni_syscall /* Reserved for Security */ - .long sys_gettid - .long sys_readahead /* 225 */ - .long sys_setxattr - .long sys_lsetxattr - .long sys_fsetxattr - .long sys_getxattr - .long sys_lgetxattr /* 230 */ - .long sys_fgetxattr - .long sys_listxattr - .long sys_llistxattr - .long sys_flistxattr - .long sys_removexattr /* 235 */ - .long sys_lremovexattr - .long sys_fremovexattr - .long sys_tkill - .long sys_sendfile64 - .long sys_futex /* 240 */ - .long sys_sched_setaffinity - .long sys_sched_getaffinity - .long sys_ni_syscall //sys_set_thread_area - .long sys_ni_syscall //sys_get_thread_area - .long sys_io_setup /* 245 */ - .long sys_io_destroy - .long sys_io_getevents - .long sys_io_submit - .long sys_io_cancel - .long sys_fadvise64 /* 250 */ - .long sys_ni_syscall - .long sys_exit_group - .long sys_lookup_dcookie - .long sys_epoll_create - .long sys_epoll_ctl /* 255 */ - .long sys_epoll_wait - .long sys_remap_file_pages - .long sys_set_tid_address - .long sys_timer_create - .long sys_timer_settime /* 260 */ - .long sys_timer_gettime - .long sys_timer_getoverrun - .long sys_timer_delete - .long sys_clock_settime - .long sys_clock_gettime /* 265 */ - .long sys_clock_getres - .long sys_clock_nanosleep - .long sys_statfs64 - .long sys_fstatfs64 - .long sys_tgkill /* 270 */ - .long sys_utimes - .long sys_fadvise64_64 - .long sys_ni_syscall /* sys_vserver */ - .long sys_mbind - .long sys_get_mempolicy - .long sys_set_mempolicy - .long sys_mq_open - .long sys_mq_unlink - .long sys_mq_timedsend - .long sys_mq_timedreceive /* 280 */ - .long sys_mq_notify - .long sys_mq_getsetattr - .long sys_ni_syscall /* reserved for kexec */ - .long sys_waitid - .long sys_ni_syscall /* 285 */ /* available */ - .long sys_add_key - .long sys_request_key - .long sys_keyctl - .long sys_ioprio_set - .long sys_ioprio_get /* 290 */ - .long sys_inotify_init - .long sys_inotify_add_watch - .long sys_inotify_rm_watch - .long sys_migrate_pages - .long sys_openat /* 295 */ - .long sys_mkdirat - .long sys_mknodat - .long sys_fchownat - .long sys_futimesat - .long sys_fstatat64 /* 300 */ - .long sys_unlinkat - .long sys_renameat - .long sys_linkat - .long sys_symlinkat - .long sys_readlinkat /* 305 */ - .long sys_fchmodat - .long sys_faccessat - .long sys_pselect6 - .long sys_ppoll - .long sys_unshare /* 310 */ - .long sys_set_robust_list - .long sys_get_robust_list - .long sys_splice - .long sys_sync_file_range - .long sys_tee /* 315 */ - .long sys_vmsplice - .long sys_move_pages - .long sys_getcpu - .long sys_epoll_pwait - .long sys_utimensat /* 320 */ - .long sys_signalfd - .long sys_timerfd_create - .long sys_eventfd - .long sys_fallocate - .long sys_timerfd_settime /* 325 */ - .long sys_timerfd_gettime - .long sys_signalfd4 - .long sys_eventfd2 - .long sys_epoll_create1 - .long sys_dup3 /* 330 */ - .long sys_pipe2 - .long sys_inotify_init1 - .long sys_preadv - .long sys_pwritev - .long sys_rt_tgsigqueueinfo /* 335 */ - .long sys_perf_event_open - .long sys_setns - -syscall_table_size = (. - sys_call_table) diff --git a/arch/frv/kernel/frv_ksyms.c b/arch/frv/kernel/frv_ksyms.c deleted file mode 100644 index 6ea430d58149..000000000000 --- a/arch/frv/kernel/frv_ksyms.c +++ /dev/null @@ -1,109 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include <linux/module.h> -#include <linux/linkage.h> -#include <linux/sched.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/user.h> -#include <linux/elfcore.h> -#include <linux/in6.h> -#include <linux/interrupt.h> - -#include <asm/setup.h> -#include <asm/pgalloc.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/checksum.h> -#include <asm/hardirq.h> -#include <asm/cacheflush.h> - -extern long __memcpy_user(void *dst, const void *src, size_t count); -extern long __memset_user(void *dst, const void *src, size_t count); - -/* platform dependent support */ - -EXPORT_SYMBOL(__ioremap); -EXPORT_SYMBOL(iounmap); - -EXPORT_SYMBOL(ip_fast_csum); - -#if 0 -EXPORT_SYMBOL(local_irq_count); -EXPORT_SYMBOL(local_bh_count); -#endif - -EXPORT_SYMBOL(__res_bus_clock_speed_HZ); -EXPORT_SYMBOL(__page_offset); -EXPORT_SYMBOL(__memcpy_user); -EXPORT_SYMBOL(__memset_user); -EXPORT_SYMBOL(frv_dcache_writeback); -EXPORT_SYMBOL(frv_cache_invalidate); -EXPORT_SYMBOL(frv_icache_invalidate); -EXPORT_SYMBOL(frv_cache_wback_inv); - -#ifndef CONFIG_MMU -EXPORT_SYMBOL(memory_start); -EXPORT_SYMBOL(memory_end); -#endif - -EXPORT_SYMBOL(__debug_bug_trap); - -/* The following are special because they're not called - explicitly (the C compiler generates them). Fortunately, - their interface isn't gonna change any time soon now, so - it's OK to leave it out of version control. */ -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memset); - -EXPORT_SYMBOL(__outsl_ns); -EXPORT_SYMBOL(__insl_ns); - -#ifdef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS -EXPORT_SYMBOL(__xchg_32); -EXPORT_SYMBOL(__cmpxchg_32); -#endif -EXPORT_SYMBOL(atomic64_add_return); -EXPORT_SYMBOL(atomic64_sub_return); -EXPORT_SYMBOL(__xchg_64); -EXPORT_SYMBOL(__cmpxchg_64); - -EXPORT_SYMBOL(__debug_bug_printk); -EXPORT_SYMBOL(__delay_loops_MHz); - -/* - * libgcc functions - functions that are used internally by the - * compiler... (prototypes are not correct though, but that - * doesn't really matter since they're not versioned). - */ -extern void __gcc_bcmp(void); -extern void __ashldi3(void); -extern void __ashrdi3(void); -extern void __cmpdi2(void); -extern void __divdi3(void); -extern void __lshrdi3(void); -extern void __moddi3(void); -extern void __muldi3(void); -extern void __mulll(void); -extern void __umulll(void); -extern void __negdi2(void); -extern void __ucmpdi2(void); -extern void __udivdi3(void); -extern void __udivmoddi4(void); -extern void __umoddi3(void); - - /* gcc lib functions */ -//EXPORT_SYMBOL(__gcc_bcmp); -EXPORT_SYMBOL(__ashldi3); -EXPORT_SYMBOL(__ashrdi3); -//EXPORT_SYMBOL(__cmpdi2); -//EXPORT_SYMBOL(__divdi3); -EXPORT_SYMBOL(__lshrdi3); -//EXPORT_SYMBOL(__moddi3); -EXPORT_SYMBOL(__muldi3); -EXPORT_SYMBOL(__mulll); -EXPORT_SYMBOL(__umulll); -EXPORT_SYMBOL(__negdi2); -EXPORT_SYMBOL(__ucmpdi2); -//EXPORT_SYMBOL(__udivdi3); -//EXPORT_SYMBOL(__udivmoddi4); -//EXPORT_SYMBOL(__umoddi3); diff --git a/arch/frv/kernel/futex.c b/arch/frv/kernel/futex.c deleted file mode 100644 index 37f7b2bf7f73..000000000000 --- a/arch/frv/kernel/futex.c +++ /dev/null @@ -1,223 +0,0 @@ -/* futex.c: futex operations - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/futex.h> -#include <linux/uaccess.h> -#include <asm/futex.h> -#include <asm/errno.h> - -/* - * the various futex operations; MMU fault checking is ignored under no-MMU - * conditions - */ -static inline int atomic_futex_op_xchg_set(int oparg, u32 __user *uaddr, int *_oldval) -{ - int oldval, ret; - - asm("0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - "2: cst.p %3,%M0 ,cc3,#1 \n" - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ - " beq icc3,#0,0b \n" - " setlos 0,%2 \n" - "3: \n" - ".subsection 2 \n" - "4: setlos %5,%2 \n" - " bra 3b \n" - ".previous \n" - ".section __ex_table,\"a\" \n" - " .balign 8 \n" - " .long 1b,4b \n" - " .long 2b,4b \n" - ".previous" - : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg) - : "3"(oparg), "i"(-EFAULT) - : "memory", "cc7", "cc3", "icc3" - ); - - *_oldval = oldval; - return ret; -} - -static inline int atomic_futex_op_xchg_add(int oparg, u32 __user *uaddr, int *_oldval) -{ - int oldval, ret; - - asm("0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - " add %1,%3,%3 \n" - "2: cst.p %3,%M0 ,cc3,#1 \n" - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ - " beq icc3,#0,0b \n" - " setlos 0,%2 \n" - "3: \n" - ".subsection 2 \n" - "4: setlos %5,%2 \n" - " bra 3b \n" - ".previous \n" - ".section __ex_table,\"a\" \n" - " .balign 8 \n" - " .long 1b,4b \n" - " .long 2b,4b \n" - ".previous" - : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg) - : "3"(oparg), "i"(-EFAULT) - : "memory", "cc7", "cc3", "icc3" - ); - - *_oldval = oldval; - return ret; -} - -static inline int atomic_futex_op_xchg_or(int oparg, u32 __user *uaddr, int *_oldval) -{ - int oldval, ret; - - asm("0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - " or %1,%3,%3 \n" - "2: cst.p %3,%M0 ,cc3,#1 \n" - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ - " beq icc3,#0,0b \n" - " setlos 0,%2 \n" - "3: \n" - ".subsection 2 \n" - "4: setlos %5,%2 \n" - " bra 3b \n" - ".previous \n" - ".section __ex_table,\"a\" \n" - " .balign 8 \n" - " .long 1b,4b \n" - " .long 2b,4b \n" - ".previous" - : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg) - : "3"(oparg), "i"(-EFAULT) - : "memory", "cc7", "cc3", "icc3" - ); - - *_oldval = oldval; - return ret; -} - -static inline int atomic_futex_op_xchg_and(int oparg, u32 __user *uaddr, int *_oldval) -{ - int oldval, ret; - - asm("0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - " and %1,%3,%3 \n" - "2: cst.p %3,%M0 ,cc3,#1 \n" - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ - " beq icc3,#0,0b \n" - " setlos 0,%2 \n" - "3: \n" - ".subsection 2 \n" - "4: setlos %5,%2 \n" - " bra 3b \n" - ".previous \n" - ".section __ex_table,\"a\" \n" - " .balign 8 \n" - " .long 1b,4b \n" - " .long 2b,4b \n" - ".previous" - : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg) - : "3"(oparg), "i"(-EFAULT) - : "memory", "cc7", "cc3", "icc3" - ); - - *_oldval = oldval; - return ret; -} - -static inline int atomic_futex_op_xchg_xor(int oparg, u32 __user *uaddr, int *_oldval) -{ - int oldval, ret; - - asm("0: \n" - " orcc gr0,gr0,gr0,icc3 \n" /* set ICC3.Z */ - " ckeq icc3,cc7 \n" - "1: ld.p %M0,%1 \n" /* LD.P/ORCR must be atomic */ - " orcr cc7,cc7,cc3 \n" /* set CC3 to true */ - " xor %1,%3,%3 \n" - "2: cst.p %3,%M0 ,cc3,#1 \n" - " corcc gr29,gr29,gr0 ,cc3,#1 \n" /* clear ICC3.Z if store happens */ - " beq icc3,#0,0b \n" - " setlos 0,%2 \n" - "3: \n" - ".subsection 2 \n" - "4: setlos %5,%2 \n" - " bra 3b \n" - ".previous \n" - ".section __ex_table,\"a\" \n" - " .balign 8 \n" - " .long 1b,4b \n" - " .long 2b,4b \n" - ".previous" - : "+U"(*uaddr), "=&r"(oldval), "=&r"(ret), "=r"(oparg) - : "3"(oparg), "i"(-EFAULT) - : "memory", "cc7", "cc3", "icc3" - ); - - *_oldval = oldval; - return ret; -} - -/*****************************************************************************/ -/* - * do the futex operations - */ -int arch_futex_atomic_op_inuser(int op, int oparg, int *oval, u32 __user *uaddr) -{ - int oldval = 0, ret; - - pagefault_disable(); - - switch (op) { - case FUTEX_OP_SET: - ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval); - break; - case FUTEX_OP_ADD: - ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval); - break; - case FUTEX_OP_OR: - ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval); - break; - case FUTEX_OP_ANDN: - ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval); - break; - case FUTEX_OP_XOR: - ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval); - break; - default: - ret = -ENOSYS; - break; - } - - pagefault_enable(); - - if (!ret) - *oval = oldval; - - return ret; - -} /* end arch_futex_atomic_op_inuser() */ diff --git a/arch/frv/kernel/gdb-io.c b/arch/frv/kernel/gdb-io.c deleted file mode 100644 index 0707d35079ba..000000000000 --- a/arch/frv/kernel/gdb-io.c +++ /dev/null @@ -1,215 +0,0 @@ -/* gdb-io.c: FR403 GDB stub I/O - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/init.h> -#include <linux/serial_reg.h> - -#include <asm/pgtable.h> -#include <asm/irc-regs.h> -#include <asm/timer-regs.h> -#include <asm/gdb-stub.h> -#include "gdb-io.h" - -#ifdef CONFIG_GDBSTUB_UART0 -#define __UART(X) (*(volatile uint8_t *)(UART0_BASE + (UART_##X))) -#define __UART_IRR_NMI 0xff0f0000 -#else /* CONFIG_GDBSTUB_UART1 */ -#define __UART(X) (*(volatile uint8_t *)(UART1_BASE + (UART_##X))) -#define __UART_IRR_NMI 0xfff00000 -#endif - -#define LSR_WAIT_FOR(STATE) \ -do { \ - gdbstub_do_rx(); \ -} while (!(__UART(LSR) & UART_LSR_##STATE)) - -#define FLOWCTL_QUERY(LINE) ({ __UART(MSR) & UART_MSR_##LINE; }) -#define FLOWCTL_CLEAR(LINE) do { __UART(MCR) &= ~UART_MCR_##LINE; mb(); } while (0) -#define FLOWCTL_SET(LINE) do { __UART(MCR) |= UART_MCR_##LINE; mb(); } while (0) - -#define FLOWCTL_WAIT_FOR(LINE) \ -do { \ - gdbstub_do_rx(); \ -} while(!FLOWCTL_QUERY(LINE)) - -/*****************************************************************************/ -/* - * initialise the GDB stub - * - called with PSR.ET==0, so can't incur external interrupts - */ -void gdbstub_io_init(void) -{ - /* set up the serial port */ - __UART(LCR) = UART_LCR_WLEN8; /* 1N8 */ - __UART(FCR) = - UART_FCR_ENABLE_FIFO | - UART_FCR_CLEAR_RCVR | - UART_FCR_CLEAR_XMIT | - UART_FCR_TRIGGER_1; - - FLOWCTL_CLEAR(DTR); - FLOWCTL_SET(RTS); - -// gdbstub_set_baud(115200); - - /* we want to get serial receive interrupts */ - __UART(IER) = UART_IER_RDI | UART_IER_RLSI; - mb(); - - __set_IRR(6, __UART_IRR_NMI); /* map ERRs and UARTx to NMI */ - -} /* end gdbstub_io_init() */ - -/*****************************************************************************/ -/* - * set up the GDB stub serial port baud rate timers - */ -void gdbstub_set_baud(unsigned baud) -{ - unsigned value, high, low; - u8 lcr; - - /* work out the divisor to give us the nearest higher baud rate */ - value = __serial_clock_speed_HZ / 16 / baud; - - /* determine the baud rate range */ - high = __serial_clock_speed_HZ / 16 / value; - low = __serial_clock_speed_HZ / 16 / (value + 1); - - /* pick the nearest bound */ - if (low + (high - low) / 2 > baud) - value++; - - lcr = __UART(LCR); - __UART(LCR) |= UART_LCR_DLAB; - mb(); - __UART(DLL) = value & 0xff; - __UART(DLM) = (value >> 8) & 0xff; - mb(); - __UART(LCR) = lcr; - mb(); - -} /* end gdbstub_set_baud() */ - -/*****************************************************************************/ -/* - * receive characters into the receive FIFO - */ -void gdbstub_do_rx(void) -{ - unsigned ix, nix; - - ix = gdbstub_rx_inp; - - while (__UART(LSR) & UART_LSR_DR) { - nix = (ix + 2) & 0xfff; - if (nix == gdbstub_rx_outp) - break; - - gdbstub_rx_buffer[ix++] = __UART(LSR); - gdbstub_rx_buffer[ix++] = __UART(RX); - ix = nix; - } - - gdbstub_rx_inp = ix; - - __clr_RC(15); - __clr_IRL(); - -} /* end gdbstub_do_rx() */ - -/*****************************************************************************/ -/* - * wait for a character to come from the debugger - */ -int gdbstub_rx_char(unsigned char *_ch, int nonblock) -{ - unsigned ix; - u8 ch, st; - - *_ch = 0xff; - - if (gdbstub_rx_unget) { - *_ch = gdbstub_rx_unget; - gdbstub_rx_unget = 0; - return 0; - } - - try_again: - gdbstub_do_rx(); - - /* pull chars out of the buffer */ - ix = gdbstub_rx_outp; - if (ix == gdbstub_rx_inp) { - if (nonblock) - return -EAGAIN; - //watchdog_alert_counter = 0; - goto try_again; - } - - st = gdbstub_rx_buffer[ix++]; - ch = gdbstub_rx_buffer[ix++]; - gdbstub_rx_outp = ix & 0x00000fff; - - if (st & UART_LSR_BI) { - gdbstub_proto("### GDB Rx Break Detected ###\n"); - return -EINTR; - } - else if (st & (UART_LSR_FE|UART_LSR_OE|UART_LSR_PE)) { - gdbstub_io("### GDB Rx Error (st=%02x) ###\n",st); - return -EIO; - } - else { - gdbstub_io("### GDB Rx %02x (st=%02x) ###\n",ch,st); - *_ch = ch & 0x7f; - return 0; - } - -} /* end gdbstub_rx_char() */ - -/*****************************************************************************/ -/* - * send a character to the debugger - */ -void gdbstub_tx_char(unsigned char ch) -{ - FLOWCTL_SET(DTR); - LSR_WAIT_FOR(THRE); -// FLOWCTL_WAIT_FOR(CTS); - - if (ch == 0x0a) { - __UART(TX) = 0x0d; - mb(); - LSR_WAIT_FOR(THRE); -// FLOWCTL_WAIT_FOR(CTS); - } - __UART(TX) = ch; - mb(); - - FLOWCTL_CLEAR(DTR); -} /* end gdbstub_tx_char() */ - -/*****************************************************************************/ -/* - * send a character to the debugger - */ -void gdbstub_tx_flush(void) -{ - LSR_WAIT_FOR(TEMT); - LSR_WAIT_FOR(THRE); - FLOWCTL_CLEAR(DTR); -} /* end gdbstub_tx_flush() */ diff --git a/arch/frv/kernel/gdb-io.h b/arch/frv/kernel/gdb-io.h deleted file mode 100644 index 138714bacc40..000000000000 --- a/arch/frv/kernel/gdb-io.h +++ /dev/null @@ -1,55 +0,0 @@ -/* gdb-io.h: FR403 GDB I/O port defs - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _GDB_IO_H -#define _GDB_IO_H - -#include <asm/serial-regs.h> - -#undef UART_RX -#undef UART_TX -#undef UART_DLL -#undef UART_DLM -#undef UART_IER -#undef UART_IIR -#undef UART_FCR -#undef UART_LCR -#undef UART_MCR -#undef UART_LSR -#undef UART_MSR -#undef UART_SCR - -#define UART_RX 0*8 /* In: Receive buffer (DLAB=0) */ -#define UART_TX 0*8 /* Out: Transmit buffer (DLAB=0) */ -#define UART_DLL 0*8 /* Out: Divisor Latch Low (DLAB=1) */ -#define UART_DLM 1*8 /* Out: Divisor Latch High (DLAB=1) */ -#define UART_IER 1*8 /* Out: Interrupt Enable Register */ -#define UART_IIR 2*8 /* In: Interrupt ID Register */ -#define UART_FCR 2*8 /* Out: FIFO Control Register */ -#define UART_LCR 3*8 /* Out: Line Control Register */ -#define UART_MCR 4*8 /* Out: Modem Control Register */ -#define UART_LSR 5*8 /* In: Line Status Register */ -#define UART_MSR 6*8 /* In: Modem Status Register */ -#define UART_SCR 7*8 /* I/O: Scratch Register */ - -#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - - -#endif /* _GDB_IO_H */ diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c deleted file mode 100644 index bbe78b0bffec..000000000000 --- a/arch/frv/kernel/gdb-stub.c +++ /dev/null @@ -1,2149 +0,0 @@ -/* gdb-stub.c: FRV GDB stub - * - * Copyright (C) 2003,4 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from Linux/MIPS version, Copyright (C) 1995 Andreas Busse - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* - * To enable debugger support, two things need to happen. One, a - * call to set_debug_traps() is necessary in order to allow any breakpoints - * or error conditions to be properly intercepted and reported to gdb. - * Two, a breakpoint needs to be generated to begin communication. This - * is most easily accomplished by a call to breakpoint(). Breakpoint() - * simulates a breakpoint by executing a BREAK instruction. - * - * - * The following gdb commands are supported: - * - * command function Return value - * - * g return the value of the CPU registers hex data or ENN - * G set the value of the CPU registers OK or ENN - * - * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN - * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN - * - * c Resume at current address SNN ( signal NN) - * cAA..AA Continue at address AA..AA SNN - * - * s Step one instruction SNN - * sAA..AA Step one instruction from AA..AA SNN - * - * k kill - * - * ? What was the last sigval ? SNN (signal NN) - * - * bBB..BB Set baud rate to BB..BB OK or BNN, then sets - * baud rate - * - * All commands and responses are sent with a packet which includes a - * checksum. A packet consists of - * - * $<packet info>#<checksum>. - * - * where - * <packet info> :: <characters representing the command or response> - * <checksum> :: < two hex digits computed as modulo 256 sum of <packetinfo>> - * - * When a packet is received, it is first acknowledged with either '+' or '-'. - * '+' indicates a successful transfer. '-' indicates a failed transfer. - * - * Example: - * - * Host: Reply: - * $m0,10#2a +$00010203040506070809101112131415#42 - * - * - * ============== - * MORE EXAMPLES: - * ============== - * - * For reference -- the following are the steps that one - * company took (RidgeRun Inc) to get remote gdb debugging - * going. In this scenario the host machine was a PC and the - * target platform was a Galileo EVB64120A MIPS evaluation - * board. - * - * Step 1: - * First download gdb-5.0.tar.gz from the internet. - * and then build/install the package. - * - * Example: - * $ tar zxf gdb-5.0.tar.gz - * $ cd gdb-5.0 - * $ ./configure --target=frv-elf-gdb - * $ make - * $ frv-elf-gdb - * - * Step 2: - * Configure linux for remote debugging and build it. - * - * Example: - * $ cd ~/linux - * $ make menuconfig <go to "Kernel Hacking" and turn on remote debugging> - * $ make vmlinux - * - * Step 3: - * Download the kernel to the remote target and start - * the kernel running. It will promptly halt and wait - * for the host gdb session to connect. It does this - * since the "Kernel Hacking" option has defined - * CONFIG_REMOTE_DEBUG which in turn enables your calls - * to: - * set_debug_traps(); - * breakpoint(); - * - * Step 4: - * Start the gdb session on the host. - * - * Example: - * $ frv-elf-gdb vmlinux - * (gdb) set remotebaud 115200 - * (gdb) target remote /dev/ttyS1 - * ...at this point you are connected to - * the remote target and can use gdb - * in the normal fasion. Setting - * breakpoints, single stepping, - * printing variables, etc. - * - */ - -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/nmi.h> - -#include <asm/asm-offsets.h> -#include <asm/pgtable.h> -#include <asm/gdb-stub.h> - -#define LEDS(x) do { /* *(u32*)0xe1200004 = ~(x); mb(); */ } while(0) - -#undef GDBSTUB_DEBUG_PROTOCOL - -extern void debug_to_serial(const char *p, int n); -extern void gdbstub_console_write(struct console *co, const char *p, unsigned n); - -extern volatile uint32_t __break_error_detect[3]; /* ESFR1, ESR15, EAR15 */ - -struct __debug_amr { - unsigned long L, P; -} __attribute__((aligned(8))); - -struct __debug_mmu { - struct { - unsigned long hsr0, pcsr, esr0, ear0, epcr0; -#ifdef CONFIG_MMU - unsigned long tplr, tppr, tpxr, cxnr; -#endif - } regs; - - struct __debug_amr iamr[16]; - struct __debug_amr damr[16]; - -#ifdef CONFIG_MMU - struct __debug_amr tlb[64*2]; -#endif -}; - -static struct __debug_mmu __debug_mmu; - -/* - * BUFMAX defines the maximum number of characters in inbound/outbound buffers - * at least NUMREGBYTES*2 are needed for register packets - */ -#define BUFMAX 2048 - -#define BREAK_INSN 0x801000c0 /* use "break" as bkpt */ - -static const char gdbstub_banner[] = "Linux/FR-V GDB Stub (c) RedHat 2003\n"; - -volatile u8 gdbstub_rx_buffer[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE))); -volatile u32 gdbstub_rx_inp = 0; -volatile u32 gdbstub_rx_outp = 0; -volatile u8 gdbstub_rx_overflow = 0; -u8 gdbstub_rx_unget = 0; - -/* set with GDB whilst running to permit step through exceptions */ -extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_exceptions; - -static char input_buffer[BUFMAX]; -static char output_buffer[BUFMAX]; - -static const char *regnames[] = { - "PSR ", "ISR ", "CCR ", "CCCR", - "LR ", "LCR ", "PC ", "_stt", - "sys ", "GR8*", "GNE0", "GNE1", - "IACH", "IACL", - "TBR ", "SP ", "FP ", "GR3 ", - "GR4 ", "GR5 ", "GR6 ", "GR7 ", - "GR8 ", "GR9 ", "GR10", "GR11", - "GR12", "GR13", "GR14", "GR15", - "GR16", "GR17", "GR18", "GR19", - "GR20", "GR21", "GR22", "GR23", - "GR24", "GR25", "GR26", "GR27", - "EFRM", "CURR", "GR30", "BFRM" -}; - -struct gdbstub_bkpt { - unsigned long addr; /* address of breakpoint */ - unsigned len; /* size of breakpoint */ - uint32_t originsns[7]; /* original instructions */ -}; - -static struct gdbstub_bkpt gdbstub_bkpts[256]; - -/* - * local prototypes - */ - -static void gdbstub_recv_packet(char *buffer); -static int gdbstub_send_packet(char *buffer); -static int gdbstub_compute_signal(unsigned long tbr); -static int hex(unsigned char ch); -static int hexToInt(char **ptr, unsigned long *intValue); -static unsigned char *mem2hex(const void *mem, char *buf, int count, int may_fault); -static char *hex2mem(const char *buf, void *_mem, int count); - -/* - * Convert ch from a hex digit to an int - */ -static int hex(unsigned char ch) -{ - if (ch >= 'a' && ch <= 'f') - return ch-'a'+10; - if (ch >= '0' && ch <= '9') - return ch-'0'; - if (ch >= 'A' && ch <= 'F') - return ch-'A'+10; - return -1; -} - -void gdbstub_printk(const char *fmt, ...) -{ - static char buf[1024]; - va_list args; - int len; - - /* Emit the output into the temporary buffer */ - va_start(args, fmt); - len = vsnprintf(buf, sizeof(buf), fmt, args); - va_end(args); - debug_to_serial(buf, len); -} - -static inline char *gdbstub_strcpy(char *dst, const char *src) -{ - int loop = 0; - while ((dst[loop] = src[loop])) - loop++; - return dst; -} - -static void gdbstub_purge_cache(void) -{ - asm volatile(" dcef @(gr0,gr0),#1 \n" - " icei @(gr0,gr0),#1 \n" - " membar \n" - " bar \n" - ); -} - -/*****************************************************************************/ -/* - * scan for the sequence $<data>#<checksum> - */ -static void gdbstub_recv_packet(char *buffer) -{ - unsigned char checksum; - unsigned char xmitcsum; - unsigned char ch; - int count, i, ret, error; - - for (;;) { - /* wait around for the start character, ignore all other characters */ - do { - gdbstub_rx_char(&ch, 0); - } while (ch != '$'); - - checksum = 0; - xmitcsum = -1; - count = 0; - error = 0; - - /* now, read until a # or end of buffer is found */ - while (count < BUFMAX) { - ret = gdbstub_rx_char(&ch, 0); - if (ret < 0) - error = ret; - - if (ch == '#') - break; - checksum += ch; - buffer[count] = ch; - count++; - } - - if (error == -EIO) { - gdbstub_proto("### GDB Rx Error - Skipping packet ###\n"); - gdbstub_proto("### GDB Tx NAK\n"); - gdbstub_tx_char('-'); - continue; - } - - if (count >= BUFMAX || error) - continue; - - buffer[count] = 0; - - /* read the checksum */ - ret = gdbstub_rx_char(&ch, 0); - if (ret < 0) - error = ret; - xmitcsum = hex(ch) << 4; - - ret = gdbstub_rx_char(&ch, 0); - if (ret < 0) - error = ret; - xmitcsum |= hex(ch); - - if (error) { - if (error == -EIO) - gdbstub_proto("### GDB Rx Error - Skipping packet\n"); - gdbstub_proto("### GDB Tx NAK\n"); - gdbstub_tx_char('-'); - continue; - } - - /* check the checksum */ - if (checksum != xmitcsum) { - gdbstub_proto("### GDB Tx NAK\n"); - gdbstub_tx_char('-'); /* failed checksum */ - continue; - } - - gdbstub_proto("### GDB Rx '$%s#%02x' ###\n", buffer, checksum); - gdbstub_proto("### GDB Tx ACK\n"); - gdbstub_tx_char('+'); /* successful transfer */ - - /* if a sequence char is present, reply the sequence ID */ - if (buffer[2] == ':') { - gdbstub_tx_char(buffer[0]); - gdbstub_tx_char(buffer[1]); - - /* remove sequence chars from buffer */ - count = 0; - while (buffer[count]) count++; - for (i=3; i <= count; i++) - buffer[i - 3] = buffer[i]; - } - - break; - } -} /* end gdbstub_recv_packet() */ - -/*****************************************************************************/ -/* - * send the packet in buffer. - * - return 0 if successfully ACK'd - * - return 1 if abandoned due to new incoming packet - */ -static int gdbstub_send_packet(char *buffer) -{ - unsigned char checksum; - int count; - unsigned char ch; - - /* $<packet info>#<checksum> */ - gdbstub_proto("### GDB Tx '%s' ###\n", buffer); - - do { - gdbstub_tx_char('$'); - checksum = 0; - count = 0; - - while ((ch = buffer[count]) != 0) { - gdbstub_tx_char(ch); - checksum += ch; - count += 1; - } - - gdbstub_tx_char('#'); - gdbstub_tx_char(hex_asc_hi(checksum)); - gdbstub_tx_char(hex_asc_lo(checksum)); - - } while (gdbstub_rx_char(&ch,0), -#ifdef GDBSTUB_DEBUG_PROTOCOL - ch=='-' && (gdbstub_proto("### GDB Rx NAK\n"),0), - ch!='-' && ch!='+' && (gdbstub_proto("### GDB Rx ??? %02x\n",ch),0), -#endif - ch!='+' && ch!='$'); - - if (ch=='+') { - gdbstub_proto("### GDB Rx ACK\n"); - return 0; - } - - gdbstub_proto("### GDB Tx Abandoned\n"); - gdbstub_rx_unget = ch; - return 1; -} /* end gdbstub_send_packet() */ - -/* - * While we find nice hex chars, build an int. - * Return number of chars processed. - */ -static int hexToInt(char **ptr, unsigned long *_value) -{ - int count = 0, ch; - - *_value = 0; - while (**ptr) { - ch = hex(**ptr); - if (ch < 0) - break; - - *_value = (*_value << 4) | ((uint8_t) ch & 0xf); - count++; - - (*ptr)++; - } - - return count; -} - -/*****************************************************************************/ -/* - * probe an address to see whether it maps to anything - */ -static inline int gdbstub_addr_probe(const void *vaddr) -{ -#ifdef CONFIG_MMU - unsigned long paddr; - - asm("lrad %1,%0,#1,#0,#0" : "=r"(paddr) : "r"(vaddr)); - if (!(paddr & xAMPRx_V)) - return 0; -#endif - - return 1; -} /* end gdbstub_addr_probe() */ - -#ifdef CONFIG_MMU -static unsigned long __saved_dampr, __saved_damlr; - -static inline unsigned long gdbstub_virt_to_pte(unsigned long vaddr) -{ - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - unsigned long val, dampr5; - - pgd = (pgd_t *) __get_DAMLR(3) + pgd_index(vaddr); - pud = pud_offset(pgd, vaddr); - pmd = pmd_offset(pud, vaddr); - - if (pmd_bad(*pmd) || !pmd_present(*pmd)) - return 0; - - /* make sure dampr5 maps to the correct pmd */ - dampr5 = __get_DAMPR(5); - val = pmd_val(*pmd); - __set_DAMPR(5, val | xAMPRx_L | xAMPRx_SS_16Kb | xAMPRx_S | xAMPRx_C | xAMPRx_V); - - /* now its safe to access pmd */ - pte = (pte_t *)__get_DAMLR(5) + __pte_index(vaddr); - if (pte_present(*pte)) - val = pte_val(*pte); - else - val = 0; - - /* restore original dampr5 */ - __set_DAMPR(5, dampr5); - - return val; -} -#endif - -static inline int gdbstub_addr_map(const void *vaddr) -{ -#ifdef CONFIG_MMU - unsigned long pte; - - __saved_dampr = __get_DAMPR(2); - __saved_damlr = __get_DAMLR(2); -#endif - if (gdbstub_addr_probe(vaddr)) - return 1; -#ifdef CONFIG_MMU - pte = gdbstub_virt_to_pte((unsigned long) vaddr); - if (pte) { - __set_DAMPR(2, pte); - __set_DAMLR(2, (unsigned long) vaddr & PAGE_MASK); - return 1; - } -#endif - return 0; -} - -static inline void gdbstub_addr_unmap(void) -{ -#ifdef CONFIG_MMU - __set_DAMPR(2, __saved_dampr); - __set_DAMLR(2, __saved_damlr); -#endif -} - -/* - * access potentially dodgy memory through a potentially dodgy pointer - */ -static inline int gdbstub_read_dword(const void *addr, uint32_t *_res) -{ - unsigned long brr; - uint32_t res; - - if (!gdbstub_addr_map(addr)) - return 0; - - asm volatile(" movgs gr0,brr \n" - " ld%I2 %M2,%0 \n" - " movsg brr,%1 \n" - : "=r"(res), "=r"(brr) - : "m"(*(uint32_t *) addr)); - *_res = res; - gdbstub_addr_unmap(); - return likely(!brr); -} - -static inline int gdbstub_write_dword(void *addr, uint32_t val) -{ - unsigned long brr; - - if (!gdbstub_addr_map(addr)) - return 0; - - asm volatile(" movgs gr0,brr \n" - " st%I2 %1,%M2 \n" - " movsg brr,%0 \n" - : "=r"(brr) - : "r"(val), "m"(*(uint32_t *) addr)); - gdbstub_addr_unmap(); - return likely(!brr); -} - -static inline int gdbstub_read_word(const void *addr, uint16_t *_res) -{ - unsigned long brr; - uint16_t res; - - if (!gdbstub_addr_map(addr)) - return 0; - - asm volatile(" movgs gr0,brr \n" - " lduh%I2 %M2,%0 \n" - " movsg brr,%1 \n" - : "=r"(res), "=r"(brr) - : "m"(*(uint16_t *) addr)); - *_res = res; - gdbstub_addr_unmap(); - return likely(!brr); -} - -static inline int gdbstub_write_word(void *addr, uint16_t val) -{ - unsigned long brr; - - if (!gdbstub_addr_map(addr)) - return 0; - - asm volatile(" movgs gr0,brr \n" - " sth%I2 %1,%M2 \n" - " movsg brr,%0 \n" - : "=r"(brr) - : "r"(val), "m"(*(uint16_t *) addr)); - gdbstub_addr_unmap(); - return likely(!brr); -} - -static inline int gdbstub_read_byte(const void *addr, uint8_t *_res) -{ - unsigned long brr; - uint8_t res; - - if (!gdbstub_addr_map(addr)) - return 0; - - asm volatile(" movgs gr0,brr \n" - " ldub%I2 %M2,%0 \n" - " movsg brr,%1 \n" - : "=r"(res), "=r"(brr) - : "m"(*(uint8_t *) addr)); - *_res = res; - gdbstub_addr_unmap(); - return likely(!brr); -} - -static inline int gdbstub_write_byte(void *addr, uint8_t val) -{ - unsigned long brr; - - if (!gdbstub_addr_map(addr)) - return 0; - - asm volatile(" movgs gr0,brr \n" - " stb%I2 %1,%M2 \n" - " movsg brr,%0 \n" - : "=r"(brr) - : "r"(val), "m"(*(uint8_t *) addr)); - gdbstub_addr_unmap(); - return likely(!brr); -} - -static void __gdbstub_console_write(struct console *co, const char *p, unsigned n) -{ - char outbuf[26]; - int qty; - - outbuf[0] = 'O'; - - while (n > 0) { - qty = 1; - - while (n > 0 && qty < 20) { - mem2hex(p, outbuf + qty, 2, 0); - qty += 2; - if (*p == 0x0a) { - outbuf[qty++] = '0'; - outbuf[qty++] = 'd'; - } - p++; - n--; - } - - outbuf[qty] = 0; - gdbstub_send_packet(outbuf); - } -} - -#if 0 -void debug_to_serial(const char *p, int n) -{ - gdbstub_console_write(NULL,p,n); -} -#endif - -#ifdef CONFIG_GDB_CONSOLE - -static struct console gdbstub_console = { - .name = "gdb", - .write = gdbstub_console_write, /* in break.S */ - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -#endif - -/*****************************************************************************/ -/* - * Convert the memory pointed to by mem into hex, placing result in buf. - * - if successful, return a pointer to the last char put in buf (NUL) - * - in case of mem fault, return NULL - * may_fault is non-zero if we are reading from arbitrary memory, but is currently - * not used. - */ -static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) -{ - const uint8_t *mem = _mem; - uint8_t ch[4] __attribute__((aligned(4))); - - if ((uint32_t)mem&1 && count>=1) { - if (!gdbstub_read_byte(mem,ch)) - return NULL; - buf = hex_byte_pack(buf, ch[0]); - mem++; - count--; - } - - if ((uint32_t)mem&3 && count>=2) { - if (!gdbstub_read_word(mem,(uint16_t *)ch)) - return NULL; - buf = hex_byte_pack(buf, ch[0]); - buf = hex_byte_pack(buf, ch[1]); - mem += 2; - count -= 2; - } - - while (count>=4) { - if (!gdbstub_read_dword(mem,(uint32_t *)ch)) - return NULL; - buf = hex_byte_pack(buf, ch[0]); - buf = hex_byte_pack(buf, ch[1]); - buf = hex_byte_pack(buf, ch[2]); - buf = hex_byte_pack(buf, ch[3]); - mem += 4; - count -= 4; - } - - if (count>=2) { - if (!gdbstub_read_word(mem,(uint16_t *)ch)) - return NULL; - buf = hex_byte_pack(buf, ch[0]); - buf = hex_byte_pack(buf, ch[1]); - mem += 2; - count -= 2; - } - - if (count>=1) { - if (!gdbstub_read_byte(mem,ch)) - return NULL; - buf = hex_byte_pack(buf, ch[0]); - } - - *buf = 0; - - return buf; -} /* end mem2hex() */ - -/*****************************************************************************/ -/* - * convert the hex array pointed to by buf into binary to be placed in mem - * return a pointer to the character AFTER the last byte of buffer consumed - */ -static char *hex2mem(const char *buf, void *_mem, int count) -{ - uint8_t *mem = _mem; - union { - uint32_t l; - uint16_t w; - uint8_t b[4]; - } ch; - - if ((u32)mem&1 && count>=1) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - if (!gdbstub_write_byte(mem,ch.b[0])) - return NULL; - mem++; - count--; - } - - if ((u32)mem&3 && count>=2) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - ch.b[1] = hex(*buf++) << 4; - ch.b[1] |= hex(*buf++); - if (!gdbstub_write_word(mem,ch.w)) - return NULL; - mem += 2; - count -= 2; - } - - while (count>=4) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - ch.b[1] = hex(*buf++) << 4; - ch.b[1] |= hex(*buf++); - ch.b[2] = hex(*buf++) << 4; - ch.b[2] |= hex(*buf++); - ch.b[3] = hex(*buf++) << 4; - ch.b[3] |= hex(*buf++); - if (!gdbstub_write_dword(mem,ch.l)) - return NULL; - mem += 4; - count -= 4; - } - - if (count>=2) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - ch.b[1] = hex(*buf++) << 4; - ch.b[1] |= hex(*buf++); - if (!gdbstub_write_word(mem,ch.w)) - return NULL; - mem += 2; - count -= 2; - } - - if (count>=1) { - ch.b[0] = hex(*buf++) << 4; - ch.b[0] |= hex(*buf++); - if (!gdbstub_write_byte(mem,ch.b[0])) - return NULL; - } - - return (char *) buf; -} /* end hex2mem() */ - -/*****************************************************************************/ -/* - * This table contains the mapping between FRV TBR.TT exception codes, - * and signals, which are primarily what GDB understands. It also - * indicates which hardware traps we need to commandeer when - * initializing the stub. - */ -static const struct brr_to_sig_map { - unsigned long brr_mask; /* BRR bitmask */ - unsigned long tbr_tt; /* TBR.TT code (in BRR.EBTT) */ - unsigned int signo; /* Signal that we map this into */ -} brr_to_sig_map[] = { - { BRR_EB, TBR_TT_INSTR_ACC_ERROR, SIGSEGV }, - { BRR_EB, TBR_TT_ILLEGAL_INSTR, SIGILL }, - { BRR_EB, TBR_TT_PRIV_INSTR, SIGILL }, - { BRR_EB, TBR_TT_MP_EXCEPTION, SIGFPE }, - { BRR_EB, TBR_TT_DATA_ACC_ERROR, SIGSEGV }, - { BRR_EB, TBR_TT_DATA_STR_ERROR, SIGSEGV }, - { BRR_EB, TBR_TT_DIVISION_EXCEP, SIGFPE }, - { BRR_EB, TBR_TT_COMPOUND_EXCEP, SIGSEGV }, - { BRR_EB, TBR_TT_INTERRUPT_13, SIGALRM }, /* watchdog */ - { BRR_EB, TBR_TT_INTERRUPT_14, SIGINT }, /* GDB serial */ - { BRR_EB, TBR_TT_INTERRUPT_15, SIGQUIT }, /* NMI */ - { BRR_CB, 0, SIGUSR1 }, - { BRR_TB, 0, SIGUSR2 }, - { BRR_DBNEx, 0, SIGTRAP }, - { BRR_DBx, 0, SIGTRAP }, /* h/w watchpoint */ - { BRR_IBx, 0, SIGTRAP }, /* h/w breakpoint */ - { BRR_CBB, 0, SIGTRAP }, - { BRR_SB, 0, SIGTRAP }, - { BRR_ST, 0, SIGTRAP }, /* single step */ - { 0, 0, SIGHUP } /* default */ -}; - -/*****************************************************************************/ -/* - * convert the FRV BRR register contents into a UNIX signal number - */ -static inline int gdbstub_compute_signal(unsigned long brr) -{ - const struct brr_to_sig_map *map; - unsigned long tbr = (brr & BRR_EBTT) >> 12; - - for (map = brr_to_sig_map; map->brr_mask; map++) - if (map->brr_mask & brr) - if (!map->tbr_tt || map->tbr_tt == tbr) - break; - - return map->signo; -} /* end gdbstub_compute_signal() */ - -/*****************************************************************************/ -/* - * set a software breakpoint or a hardware breakpoint or watchpoint - */ -static int gdbstub_set_breakpoint(unsigned long type, unsigned long addr, unsigned long len) -{ - unsigned long tmp; - int bkpt, loop, xloop; - - union { - struct { - unsigned long mask0, mask1; - }; - uint8_t bytes[8]; - } dbmr; - - //gdbstub_printk("setbkpt(%ld,%08lx,%ld)\n", type, addr, len); - - switch (type) { - /* set software breakpoint */ - case 0: - if (addr & 3 || len > 7*4) - return -EINVAL; - - for (bkpt = 255; bkpt >= 0; bkpt--) - if (!gdbstub_bkpts[bkpt].addr) - break; - if (bkpt < 0) - return -ENOSPC; - - for (loop = 0; loop < len/4; loop++) - if (!gdbstub_read_dword(&((uint32_t *) addr)[loop], - &gdbstub_bkpts[bkpt].originsns[loop])) - return -EFAULT; - - for (loop = 0; loop < len/4; loop++) - if (!gdbstub_write_dword(&((uint32_t *) addr)[loop], - BREAK_INSN) - ) { - /* need to undo the changes if possible */ - for (xloop = 0; xloop < loop; xloop++) - gdbstub_write_dword(&((uint32_t *) addr)[xloop], - gdbstub_bkpts[bkpt].originsns[xloop]); - return -EFAULT; - } - - gdbstub_bkpts[bkpt].addr = addr; - gdbstub_bkpts[bkpt].len = len; - -#if 0 - gdbstub_printk("Set BKPT[%02x]: %08lx #%d {%04x, %04x} -> { %04x, %04x }\n", - bkpt, - gdbstub_bkpts[bkpt].addr, - gdbstub_bkpts[bkpt].len, - gdbstub_bkpts[bkpt].originsns[0], - gdbstub_bkpts[bkpt].originsns[1], - ((uint32_t *) addr)[0], - ((uint32_t *) addr)[1] - ); -#endif - return 0; - - /* set hardware breakpoint */ - case 1: - if (addr & 3 || len != 4) - return -EINVAL; - - if (!(__debug_regs->dcr & DCR_IBE0)) { - //gdbstub_printk("set h/w break 0: %08lx\n", addr); - __debug_regs->dcr |= DCR_IBE0; - __debug_regs->ibar[0] = addr; - asm volatile("movgs %0,ibar0" : : "r"(addr)); - return 0; - } - - if (!(__debug_regs->dcr & DCR_IBE1)) { - //gdbstub_printk("set h/w break 1: %08lx\n", addr); - __debug_regs->dcr |= DCR_IBE1; - __debug_regs->ibar[1] = addr; - asm volatile("movgs %0,ibar1" : : "r"(addr)); - return 0; - } - - if (!(__debug_regs->dcr & DCR_IBE2)) { - //gdbstub_printk("set h/w break 2: %08lx\n", addr); - __debug_regs->dcr |= DCR_IBE2; - __debug_regs->ibar[2] = addr; - asm volatile("movgs %0,ibar2" : : "r"(addr)); - return 0; - } - - if (!(__debug_regs->dcr & DCR_IBE3)) { - //gdbstub_printk("set h/w break 3: %08lx\n", addr); - __debug_regs->dcr |= DCR_IBE3; - __debug_regs->ibar[3] = addr; - asm volatile("movgs %0,ibar3" : : "r"(addr)); - return 0; - } - - return -ENOSPC; - - /* set data read/write/access watchpoint */ - case 2: - case 3: - case 4: - if ((addr & ~7) != ((addr + len - 1) & ~7)) - return -EINVAL; - - tmp = addr & 7; - - memset(dbmr.bytes, 0xff, sizeof(dbmr.bytes)); - for (loop = 0; loop < len; loop++) - dbmr.bytes[tmp + loop] = 0; - - addr &= ~7; - - if (!(__debug_regs->dcr & (DCR_DRBE0|DCR_DWBE0))) { - //gdbstub_printk("set h/w watchpoint 0 type %ld: %08lx\n", type, addr); - tmp = type==2 ? DCR_DWBE0 : type==3 ? DCR_DRBE0 : DCR_DRBE0|DCR_DWBE0; - - __debug_regs->dcr |= tmp; - __debug_regs->dbar[0] = addr; - __debug_regs->dbmr[0][0] = dbmr.mask0; - __debug_regs->dbmr[0][1] = dbmr.mask1; - __debug_regs->dbdr[0][0] = 0; - __debug_regs->dbdr[0][1] = 0; - - asm volatile(" movgs %0,dbar0 \n" - " movgs %1,dbmr00 \n" - " movgs %2,dbmr01 \n" - " movgs gr0,dbdr00 \n" - " movgs gr0,dbdr01 \n" - : : "r"(addr), "r"(dbmr.mask0), "r"(dbmr.mask1)); - return 0; - } - - if (!(__debug_regs->dcr & (DCR_DRBE1|DCR_DWBE1))) { - //gdbstub_printk("set h/w watchpoint 1 type %ld: %08lx\n", type, addr); - tmp = type==2 ? DCR_DWBE1 : type==3 ? DCR_DRBE1 : DCR_DRBE1|DCR_DWBE1; - - __debug_regs->dcr |= tmp; - __debug_regs->dbar[1] = addr; - __debug_regs->dbmr[1][0] = dbmr.mask0; - __debug_regs->dbmr[1][1] = dbmr.mask1; - __debug_regs->dbdr[1][0] = 0; - __debug_regs->dbdr[1][1] = 0; - - asm volatile(" movgs %0,dbar1 \n" - " movgs %1,dbmr10 \n" - " movgs %2,dbmr11 \n" - " movgs gr0,dbdr10 \n" - " movgs gr0,dbdr11 \n" - : : "r"(addr), "r"(dbmr.mask0), "r"(dbmr.mask1)); - return 0; - } - - return -ENOSPC; - - default: - return -EINVAL; - } - -} /* end gdbstub_set_breakpoint() */ - -/*****************************************************************************/ -/* - * clear a breakpoint or watchpoint - */ -int gdbstub_clear_breakpoint(unsigned long type, unsigned long addr, unsigned long len) -{ - unsigned long tmp; - int bkpt, loop; - - union { - struct { - unsigned long mask0, mask1; - }; - uint8_t bytes[8]; - } dbmr; - - //gdbstub_printk("clearbkpt(%ld,%08lx,%ld)\n", type, addr, len); - - switch (type) { - /* clear software breakpoint */ - case 0: - for (bkpt = 255; bkpt >= 0; bkpt--) - if (gdbstub_bkpts[bkpt].addr == addr && gdbstub_bkpts[bkpt].len == len) - break; - if (bkpt < 0) - return -ENOENT; - - gdbstub_bkpts[bkpt].addr = 0; - - for (loop = 0; loop < len/4; loop++) - if (!gdbstub_write_dword(&((uint32_t *) addr)[loop], - gdbstub_bkpts[bkpt].originsns[loop])) - return -EFAULT; - return 0; - - /* clear hardware breakpoint */ - case 1: - if (addr & 3 || len != 4) - return -EINVAL; - -#define __get_ibar(X) ({ unsigned long x; asm volatile("movsg ibar"#X",%0" : "=r"(x)); x; }) - - if (__debug_regs->dcr & DCR_IBE0 && __get_ibar(0) == addr) { - //gdbstub_printk("clear h/w break 0: %08lx\n", addr); - __debug_regs->dcr &= ~DCR_IBE0; - __debug_regs->ibar[0] = 0; - asm volatile("movgs gr0,ibar0"); - return 0; - } - - if (__debug_regs->dcr & DCR_IBE1 && __get_ibar(1) == addr) { - //gdbstub_printk("clear h/w break 1: %08lx\n", addr); - __debug_regs->dcr &= ~DCR_IBE1; - __debug_regs->ibar[1] = 0; - asm volatile("movgs gr0,ibar1"); - return 0; - } - - if (__debug_regs->dcr & DCR_IBE2 && __get_ibar(2) == addr) { - //gdbstub_printk("clear h/w break 2: %08lx\n", addr); - __debug_regs->dcr &= ~DCR_IBE2; - __debug_regs->ibar[2] = 0; - asm volatile("movgs gr0,ibar2"); - return 0; - } - - if (__debug_regs->dcr & DCR_IBE3 && __get_ibar(3) == addr) { - //gdbstub_printk("clear h/w break 3: %08lx\n", addr); - __debug_regs->dcr &= ~DCR_IBE3; - __debug_regs->ibar[3] = 0; - asm volatile("movgs gr0,ibar3"); - return 0; - } - - return -EINVAL; - - /* clear data read/write/access watchpoint */ - case 2: - case 3: - case 4: - if ((addr & ~7) != ((addr + len - 1) & ~7)) - return -EINVAL; - - tmp = addr & 7; - - memset(dbmr.bytes, 0xff, sizeof(dbmr.bytes)); - for (loop = 0; loop < len; loop++) - dbmr.bytes[tmp + loop] = 0; - - addr &= ~7; - -#define __get_dbar(X) ({ unsigned long x; asm volatile("movsg dbar"#X",%0" : "=r"(x)); x; }) -#define __get_dbmr0(X) ({ unsigned long x; asm volatile("movsg dbmr"#X"0,%0" : "=r"(x)); x; }) -#define __get_dbmr1(X) ({ unsigned long x; asm volatile("movsg dbmr"#X"1,%0" : "=r"(x)); x; }) - - /* consider DBAR 0 */ - tmp = type==2 ? DCR_DWBE0 : type==3 ? DCR_DRBE0 : DCR_DRBE0|DCR_DWBE0; - - if ((__debug_regs->dcr & (DCR_DRBE0|DCR_DWBE0)) != tmp || - __get_dbar(0) != addr || - __get_dbmr0(0) != dbmr.mask0 || - __get_dbmr1(0) != dbmr.mask1) - goto skip_dbar0; - - //gdbstub_printk("clear h/w watchpoint 0 type %ld: %08lx\n", type, addr); - __debug_regs->dcr &= ~(DCR_DRBE0|DCR_DWBE0); - __debug_regs->dbar[0] = 0; - __debug_regs->dbmr[0][0] = 0; - __debug_regs->dbmr[0][1] = 0; - __debug_regs->dbdr[0][0] = 0; - __debug_regs->dbdr[0][1] = 0; - - asm volatile(" movgs gr0,dbar0 \n" - " movgs gr0,dbmr00 \n" - " movgs gr0,dbmr01 \n" - " movgs gr0,dbdr00 \n" - " movgs gr0,dbdr01 \n"); - return 0; - - skip_dbar0: - /* consider DBAR 0 */ - tmp = type==2 ? DCR_DWBE1 : type==3 ? DCR_DRBE1 : DCR_DRBE1|DCR_DWBE1; - - if ((__debug_regs->dcr & (DCR_DRBE1|DCR_DWBE1)) != tmp || - __get_dbar(1) != addr || - __get_dbmr0(1) != dbmr.mask0 || - __get_dbmr1(1) != dbmr.mask1) - goto skip_dbar1; - - //gdbstub_printk("clear h/w watchpoint 1 type %ld: %08lx\n", type, addr); - __debug_regs->dcr &= ~(DCR_DRBE1|DCR_DWBE1); - __debug_regs->dbar[1] = 0; - __debug_regs->dbmr[1][0] = 0; - __debug_regs->dbmr[1][1] = 0; - __debug_regs->dbdr[1][0] = 0; - __debug_regs->dbdr[1][1] = 0; - - asm volatile(" movgs gr0,dbar1 \n" - " movgs gr0,dbmr10 \n" - " movgs gr0,dbmr11 \n" - " movgs gr0,dbdr10 \n" - " movgs gr0,dbdr11 \n"); - return 0; - - skip_dbar1: - return -ENOSPC; - - default: - return -EINVAL; - } -} /* end gdbstub_clear_breakpoint() */ - -/*****************************************************************************/ -/* - * check a for an internal software breakpoint, and wind the PC back if necessary - */ -static void gdbstub_check_breakpoint(void) -{ - unsigned long addr = __debug_frame->pc - 4; - int bkpt; - - for (bkpt = 255; bkpt >= 0; bkpt--) - if (gdbstub_bkpts[bkpt].addr == addr) - break; - if (bkpt >= 0) - __debug_frame->pc = addr; - - //gdbstub_printk("alter pc [%d] %08lx\n", bkpt, __debug_frame->pc); - -} /* end gdbstub_check_breakpoint() */ - -/*****************************************************************************/ -/* - * - */ -static void __maybe_unused gdbstub_show_regs(void) -{ - unsigned long *reg; - int loop; - - gdbstub_printk("\n"); - - gdbstub_printk("Frame: @%p [%s]\n", - __debug_frame, - __debug_frame->psr & PSR_S ? "kernel" : "user"); - - reg = (unsigned long *) __debug_frame; - for (loop = 0; loop < NR_PT_REGS; loop++) { - printk("%s %08lx", regnames[loop + 0], reg[loop + 0]); - - if (loop == NR_PT_REGS - 1 || loop % 5 == 4) - printk("\n"); - else - printk(" | "); - } - - gdbstub_printk("Process %s (pid: %d)\n", current->comm, current->pid); -} /* end gdbstub_show_regs() */ - -/*****************************************************************************/ -/* - * dump debugging regs - */ -static void __maybe_unused gdbstub_dump_debugregs(void) -{ - gdbstub_printk("DCR %08lx ", __debug_status.dcr); - gdbstub_printk("BRR %08lx\n", __debug_status.brr); - - gdbstub_printk("IBAR0 %08lx ", __get_ibar(0)); - gdbstub_printk("IBAR1 %08lx ", __get_ibar(1)); - gdbstub_printk("IBAR2 %08lx ", __get_ibar(2)); - gdbstub_printk("IBAR3 %08lx\n", __get_ibar(3)); - - gdbstub_printk("DBAR0 %08lx ", __get_dbar(0)); - gdbstub_printk("DBMR00 %08lx ", __get_dbmr0(0)); - gdbstub_printk("DBMR01 %08lx\n", __get_dbmr1(0)); - - gdbstub_printk("DBAR1 %08lx ", __get_dbar(1)); - gdbstub_printk("DBMR10 %08lx ", __get_dbmr0(1)); - gdbstub_printk("DBMR11 %08lx\n", __get_dbmr1(1)); - - gdbstub_printk("\n"); -} /* end gdbstub_dump_debugregs() */ - -/*****************************************************************************/ -/* - * dump the MMU state into a structure so that it can be accessed with GDB - */ -void gdbstub_get_mmu_state(void) -{ - asm volatile("movsg hsr0,%0" : "=r"(__debug_mmu.regs.hsr0)); - asm volatile("movsg pcsr,%0" : "=r"(__debug_mmu.regs.pcsr)); - asm volatile("movsg esr0,%0" : "=r"(__debug_mmu.regs.esr0)); - asm volatile("movsg ear0,%0" : "=r"(__debug_mmu.regs.ear0)); - asm volatile("movsg epcr0,%0" : "=r"(__debug_mmu.regs.epcr0)); - - /* read the protection / SAT registers */ - __debug_mmu.iamr[0].L = __get_IAMLR(0); - __debug_mmu.iamr[0].P = __get_IAMPR(0); - __debug_mmu.iamr[1].L = __get_IAMLR(1); - __debug_mmu.iamr[1].P = __get_IAMPR(1); - __debug_mmu.iamr[2].L = __get_IAMLR(2); - __debug_mmu.iamr[2].P = __get_IAMPR(2); - __debug_mmu.iamr[3].L = __get_IAMLR(3); - __debug_mmu.iamr[3].P = __get_IAMPR(3); - __debug_mmu.iamr[4].L = __get_IAMLR(4); - __debug_mmu.iamr[4].P = __get_IAMPR(4); - __debug_mmu.iamr[5].L = __get_IAMLR(5); - __debug_mmu.iamr[5].P = __get_IAMPR(5); - __debug_mmu.iamr[6].L = __get_IAMLR(6); - __debug_mmu.iamr[6].P = __get_IAMPR(6); - __debug_mmu.iamr[7].L = __get_IAMLR(7); - __debug_mmu.iamr[7].P = __get_IAMPR(7); - __debug_mmu.iamr[8].L = __get_IAMLR(8); - __debug_mmu.iamr[8].P = __get_IAMPR(8); - __debug_mmu.iamr[9].L = __get_IAMLR(9); - __debug_mmu.iamr[9].P = __get_IAMPR(9); - __debug_mmu.iamr[10].L = __get_IAMLR(10); - __debug_mmu.iamr[10].P = __get_IAMPR(10); - __debug_mmu.iamr[11].L = __get_IAMLR(11); - __debug_mmu.iamr[11].P = __get_IAMPR(11); - __debug_mmu.iamr[12].L = __get_IAMLR(12); - __debug_mmu.iamr[12].P = __get_IAMPR(12); - __debug_mmu.iamr[13].L = __get_IAMLR(13); - __debug_mmu.iamr[13].P = __get_IAMPR(13); - __debug_mmu.iamr[14].L = __get_IAMLR(14); - __debug_mmu.iamr[14].P = __get_IAMPR(14); - __debug_mmu.iamr[15].L = __get_IAMLR(15); - __debug_mmu.iamr[15].P = __get_IAMPR(15); - - __debug_mmu.damr[0].L = __get_DAMLR(0); - __debug_mmu.damr[0].P = __get_DAMPR(0); - __debug_mmu.damr[1].L = __get_DAMLR(1); - __debug_mmu.damr[1].P = __get_DAMPR(1); - __debug_mmu.damr[2].L = __get_DAMLR(2); - __debug_mmu.damr[2].P = __get_DAMPR(2); - __debug_mmu.damr[3].L = __get_DAMLR(3); - __debug_mmu.damr[3].P = __get_DAMPR(3); - __debug_mmu.damr[4].L = __get_DAMLR(4); - __debug_mmu.damr[4].P = __get_DAMPR(4); - __debug_mmu.damr[5].L = __get_DAMLR(5); - __debug_mmu.damr[5].P = __get_DAMPR(5); - __debug_mmu.damr[6].L = __get_DAMLR(6); - __debug_mmu.damr[6].P = __get_DAMPR(6); - __debug_mmu.damr[7].L = __get_DAMLR(7); - __debug_mmu.damr[7].P = __get_DAMPR(7); - __debug_mmu.damr[8].L = __get_DAMLR(8); - __debug_mmu.damr[8].P = __get_DAMPR(8); - __debug_mmu.damr[9].L = __get_DAMLR(9); - __debug_mmu.damr[9].P = __get_DAMPR(9); - __debug_mmu.damr[10].L = __get_DAMLR(10); - __debug_mmu.damr[10].P = __get_DAMPR(10); - __debug_mmu.damr[11].L = __get_DAMLR(11); - __debug_mmu.damr[11].P = __get_DAMPR(11); - __debug_mmu.damr[12].L = __get_DAMLR(12); - __debug_mmu.damr[12].P = __get_DAMPR(12); - __debug_mmu.damr[13].L = __get_DAMLR(13); - __debug_mmu.damr[13].P = __get_DAMPR(13); - __debug_mmu.damr[14].L = __get_DAMLR(14); - __debug_mmu.damr[14].P = __get_DAMPR(14); - __debug_mmu.damr[15].L = __get_DAMLR(15); - __debug_mmu.damr[15].P = __get_DAMPR(15); - -#ifdef CONFIG_MMU - do { - /* read the DAT entries from the TLB */ - struct __debug_amr *p; - int loop; - - asm volatile("movsg tplr,%0" : "=r"(__debug_mmu.regs.tplr)); - asm volatile("movsg tppr,%0" : "=r"(__debug_mmu.regs.tppr)); - asm volatile("movsg tpxr,%0" : "=r"(__debug_mmu.regs.tpxr)); - asm volatile("movsg cxnr,%0" : "=r"(__debug_mmu.regs.cxnr)); - - p = __debug_mmu.tlb; - - /* way 0 */ - asm volatile("movgs %0,tpxr" :: "r"(0 << TPXR_WAY_SHIFT)); - for (loop = 0; loop < 64; loop++) { - asm volatile("tlbpr %0,gr0,#1,#0" :: "r"(loop << PAGE_SHIFT)); - asm volatile("movsg tplr,%0" : "=r"(p->L)); - asm volatile("movsg tppr,%0" : "=r"(p->P)); - p++; - } - - /* way 1 */ - asm volatile("movgs %0,tpxr" :: "r"(1 << TPXR_WAY_SHIFT)); - for (loop = 0; loop < 64; loop++) { - asm volatile("tlbpr %0,gr0,#1,#0" :: "r"(loop << PAGE_SHIFT)); - asm volatile("movsg tplr,%0" : "=r"(p->L)); - asm volatile("movsg tppr,%0" : "=r"(p->P)); - p++; - } - - asm volatile("movgs %0,tplr" :: "r"(__debug_mmu.regs.tplr)); - asm volatile("movgs %0,tppr" :: "r"(__debug_mmu.regs.tppr)); - asm volatile("movgs %0,tpxr" :: "r"(__debug_mmu.regs.tpxr)); - } while(0); -#endif - -} /* end gdbstub_get_mmu_state() */ - -/* - * handle general query commands of the form 'qXXXXX' - */ -static void gdbstub_handle_query(void) -{ - if (strcmp(input_buffer, "qAttached") == 0) { - /* return current thread ID */ - sprintf(output_buffer, "1"); - return; - } - - if (strcmp(input_buffer, "qC") == 0) { - /* return current thread ID */ - sprintf(output_buffer, "QC 0"); - return; - } - - if (strcmp(input_buffer, "qOffsets") == 0) { - /* return relocation offset of text and data segments */ - sprintf(output_buffer, "Text=0;Data=0;Bss=0"); - return; - } - - if (strcmp(input_buffer, "qSymbol::") == 0) { - sprintf(output_buffer, "OK"); - return; - } - - if (strcmp(input_buffer, "qSupported") == 0) { - /* query of supported features */ - sprintf(output_buffer, "PacketSize=%u;ReverseContinue-;ReverseStep-", - sizeof(input_buffer)); - return; - } - - gdbstub_strcpy(output_buffer,"E01"); -} - -/*****************************************************************************/ -/* - * handle event interception and GDB remote protocol processing - * - on entry: - * PSR.ET==0, PSR.S==1 and the CPU is in debug mode - * __debug_frame points to the saved registers - * __frame points to the kernel mode exception frame, if it was in kernel - * mode when the break happened - */ -void gdbstub(int sigval) -{ - unsigned long addr, length, loop, dbar, temp, temp2, temp3; - uint32_t zero; - char *ptr; - int flush_cache = 0; - - LEDS(0x5000); - - if (sigval < 0) { -#ifndef CONFIG_GDBSTUB_IMMEDIATE - /* return immediately if GDB immediate activation option not set */ - return; -#else - sigval = SIGINT; -#endif - } - - save_user_regs(&__debug_frame0->uc); - -#if 0 - gdbstub_printk("--> gdbstub() %08x %p %08x %08x\n", - __debug_frame->pc, - __debug_frame, - __debug_regs->brr, - __debug_regs->bpsr); -// gdbstub_show_regs(); -#endif - - LEDS(0x5001); - - /* if we were interrupted by input on the serial gdbstub serial port, - * restore the context prior to the interrupt so that we return to that - * directly - */ - temp = (unsigned long) __entry_kerneltrap_table; - temp2 = (unsigned long) __entry_usertrap_table; - temp3 = __debug_frame->pc & ~15; - - if (temp3 == temp + TBR_TT_INTERRUPT_15 || - temp3 == temp2 + TBR_TT_INTERRUPT_15 - ) { - asm volatile("movsg pcsr,%0" : "=r"(__debug_frame->pc)); - __debug_frame->psr |= PSR_ET; - __debug_frame->psr &= ~PSR_S; - if (__debug_frame->psr & PSR_PS) - __debug_frame->psr |= PSR_S; - __debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12; - __debug_status.brr |= BRR_EB; - sigval = SIGINT; - } - - /* handle the decrement timer going off (FR451 only) */ - if (temp3 == temp + TBR_TT_DECREMENT_TIMER || - temp3 == temp2 + TBR_TT_DECREMENT_TIMER - ) { - asm volatile("movgs %0,timerd" :: "r"(10000000)); - asm volatile("movsg pcsr,%0" : "=r"(__debug_frame->pc)); - __debug_frame->psr |= PSR_ET; - __debug_frame->psr &= ~PSR_S; - if (__debug_frame->psr & PSR_PS) - __debug_frame->psr |= PSR_S; - __debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12; - __debug_status.brr |= BRR_EB; - sigval = SIGXCPU; - } - - LEDS(0x5002); - - /* after a BREAK insn, the PC lands on the far side of it */ - if (__debug_status.brr & BRR_SB) - gdbstub_check_breakpoint(); - - LEDS(0x5003); - - /* handle attempts to write console data via GDB "O" commands */ - if (__debug_frame->pc == (unsigned long) gdbstub_console_write + 4) { - __gdbstub_console_write((struct console *) __debug_frame->gr8, - (const char *) __debug_frame->gr9, - (unsigned) __debug_frame->gr10); - goto done; - } - - if (gdbstub_rx_unget) { - sigval = SIGINT; - goto packet_waiting; - } - - if (!sigval) - sigval = gdbstub_compute_signal(__debug_status.brr); - - LEDS(0x5004); - - /* send a message to the debugger's user saying what happened if it may - * not be clear cut (we can't map exceptions onto signals properly) - */ - if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) { - static const char title[] = "Break "; - static const char crlf[] = "\r\n"; - unsigned long brr = __debug_status.brr; - char hx; - - ptr = output_buffer; - *ptr++ = 'O'; - ptr = mem2hex(title, ptr, sizeof(title) - 1,0); - - hx = hex_asc_hi(brr >> 24); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(brr >> 24); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_hi(brr >> 16); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(brr >> 16); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_hi(brr >> 8); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(brr >> 8); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_hi(brr); - ptr = hex_byte_pack(ptr, hx); - hx = hex_asc_lo(brr); - ptr = hex_byte_pack(ptr, hx); - - ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0); - *ptr = 0; - gdbstub_send_packet(output_buffer); /* send it off... */ - } - - LEDS(0x5005); - - /* tell the debugger that an exception has occurred */ - ptr = output_buffer; - - /* Send trap type (converted to signal) */ - *ptr++ = 'T'; - ptr = hex_byte_pack(ptr, sigval); - - /* Send Error PC */ - ptr = hex_byte_pack(ptr, GDB_REG_PC); - *ptr++ = ':'; - ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0); - *ptr++ = ';'; - - /* - * Send frame pointer - */ - ptr = hex_byte_pack(ptr, GDB_REG_FP); - *ptr++ = ':'; - ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0); - *ptr++ = ';'; - - /* - * Send stack pointer - */ - ptr = hex_byte_pack(ptr, GDB_REG_SP); - *ptr++ = ':'; - ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0); - *ptr++ = ';'; - - *ptr++ = 0; - gdbstub_send_packet(output_buffer); /* send it off... */ - - LEDS(0x5006); - - packet_waiting: - gdbstub_get_mmu_state(); - - /* wait for input from remote GDB */ - while (1) { - output_buffer[0] = 0; - - LEDS(0x5007); - gdbstub_recv_packet(input_buffer); - LEDS(0x5600 | input_buffer[0]); - - switch (input_buffer[0]) { - /* request repeat of last signal number */ - case '?': - output_buffer[0] = 'S'; - output_buffer[1] = hex_asc_hi(sigval); - output_buffer[2] = hex_asc_lo(sigval); - output_buffer[3] = 0; - break; - - case 'd': - /* toggle debug flag */ - break; - - /* return the value of the CPU registers - * - GR0, GR1, GR2, GR3, GR4, GR5, GR6, GR7, - * - GR8, GR9, GR10, GR11, GR12, GR13, GR14, GR15, - * - GR16, GR17, GR18, GR19, GR20, GR21, GR22, GR23, - * - GR24, GR25, GR26, GR27, GR28, GR29, GR30, GR31, - * - GR32, GR33, GR34, GR35, GR36, GR37, GR38, GR39, - * - GR40, GR41, GR42, GR43, GR44, GR45, GR46, GR47, - * - GR48, GR49, GR50, GR51, GR52, GR53, GR54, GR55, - * - GR56, GR57, GR58, GR59, GR60, GR61, GR62, GR63, - * - FP0, FP1, FP2, FP3, FP4, FP5, FP6, FP7, - * - FP8, FP9, FP10, FP11, FP12, FP13, FP14, FP15, - * - FP16, FP17, FP18, FP19, FP20, FP21, FP22, FP23, - * - FP24, FP25, FP26, FP27, FP28, FP29, FP30, FP31, - * - FP32, FP33, FP34, FP35, FP36, FP37, FP38, FP39, - * - FP40, FP41, FP42, FP43, FP44, FP45, FP46, FP47, - * - FP48, FP49, FP50, FP51, FP52, FP53, FP54, FP55, - * - FP56, FP57, FP58, FP59, FP60, FP61, FP62, FP63, - * - PC, PSR, CCR, CCCR, - * - _X132, _X133, _X134 - * - TBR, BRR, DBAR0, DBAR1, DBAR2, DBAR3, - * - _X141, _X142, _X143, _X144, - * - LR, LCR - */ - case 'g': - zero = 0; - ptr = output_buffer; - - /* deal with GR0, GR1-GR27, GR28-GR31, GR32-GR63 */ - ptr = mem2hex(&zero, ptr, 4, 0); - - for (loop = 1; loop <= 27; loop++) - ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0); - temp = (unsigned long) __frame; - ptr = mem2hex(&temp, ptr, 4, 0); - ptr = mem2hex(&__debug_user_context->i.gr[29], ptr, 4, 0); - ptr = mem2hex(&__debug_user_context->i.gr[30], ptr, 4, 0); -#ifdef CONFIG_MMU - ptr = mem2hex(&__debug_user_context->i.gr[31], ptr, 4, 0); -#else - temp = (unsigned long) __debug_frame; - ptr = mem2hex(&temp, ptr, 4, 0); -#endif - - for (loop = 32; loop <= 63; loop++) - ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0); - - /* deal with FR0-FR63 */ - for (loop = 0; loop <= 63; loop++) - ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0); - - /* deal with special registers */ - ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0); - ptr = mem2hex(&__debug_frame->psr, ptr, 4, 0); - ptr = mem2hex(&__debug_frame->ccr, ptr, 4, 0); - ptr = mem2hex(&__debug_frame->cccr, ptr, 4, 0); - ptr = mem2hex(&zero, ptr, 4, 0); - ptr = mem2hex(&zero, ptr, 4, 0); - ptr = mem2hex(&zero, ptr, 4, 0); - ptr = mem2hex(&__debug_frame->tbr, ptr, 4, 0); - ptr = mem2hex(&__debug_status.brr , ptr, 4, 0); - - asm volatile("movsg dbar0,%0" : "=r"(dbar)); - ptr = mem2hex(&dbar, ptr, 4, 0); - asm volatile("movsg dbar1,%0" : "=r"(dbar)); - ptr = mem2hex(&dbar, ptr, 4, 0); - asm volatile("movsg dbar2,%0" : "=r"(dbar)); - ptr = mem2hex(&dbar, ptr, 4, 0); - asm volatile("movsg dbar3,%0" : "=r"(dbar)); - ptr = mem2hex(&dbar, ptr, 4, 0); - - asm volatile("movsg scr0,%0" : "=r"(dbar)); - ptr = mem2hex(&dbar, ptr, 4, 0); - asm volatile("movsg scr1,%0" : "=r"(dbar)); - ptr = mem2hex(&dbar, ptr, 4, 0); - asm volatile("movsg scr2,%0" : "=r"(dbar)); - ptr = mem2hex(&dbar, ptr, 4, 0); - asm volatile("movsg scr3,%0" : "=r"(dbar)); - ptr = mem2hex(&dbar, ptr, 4, 0); - - ptr = mem2hex(&__debug_frame->lr, ptr, 4, 0); - ptr = mem2hex(&__debug_frame->lcr, ptr, 4, 0); - - ptr = mem2hex(&__debug_frame->iacc0, ptr, 8, 0); - - ptr = mem2hex(&__debug_user_context->f.fsr[0], ptr, 4, 0); - - for (loop = 0; loop <= 7; loop++) - ptr = mem2hex(&__debug_user_context->f.acc[loop], ptr, 4, 0); - - ptr = mem2hex(&__debug_user_context->f.accg, ptr, 8, 0); - - for (loop = 0; loop <= 1; loop++) - ptr = mem2hex(&__debug_user_context->f.msr[loop], ptr, 4, 0); - - ptr = mem2hex(&__debug_frame->gner0, ptr, 4, 0); - ptr = mem2hex(&__debug_frame->gner1, ptr, 4, 0); - - ptr = mem2hex(&__debug_user_context->f.fner[0], ptr, 4, 0); - ptr = mem2hex(&__debug_user_context->f.fner[1], ptr, 4, 0); - - break; - - /* set the values of the CPU registers */ - case 'G': - ptr = &input_buffer[1]; - - /* deal with GR0, GR1-GR27, GR28-GR31, GR32-GR63 */ - ptr = hex2mem(ptr, &temp, 4); - - for (loop = 1; loop <= 27; loop++) - ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4); - - ptr = hex2mem(ptr, &temp, 4); - __frame = (struct pt_regs *) temp; - ptr = hex2mem(ptr, &__debug_frame->gr29, 4); - ptr = hex2mem(ptr, &__debug_frame->gr30, 4); -#ifdef CONFIG_MMU - ptr = hex2mem(ptr, &__debug_frame->gr31, 4); -#else - ptr = hex2mem(ptr, &temp, 4); -#endif - - for (loop = 32; loop <= 63; loop++) - ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4); - - /* deal with FR0-FR63 */ - for (loop = 0; loop <= 63; loop++) - ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0); - - /* deal with special registers */ - ptr = hex2mem(ptr, &__debug_frame->pc, 4); - ptr = hex2mem(ptr, &__debug_frame->psr, 4); - ptr = hex2mem(ptr, &__debug_frame->ccr, 4); - ptr = hex2mem(ptr, &__debug_frame->cccr,4); - - for (loop = 132; loop <= 140; loop++) - ptr = hex2mem(ptr, &temp, 4); - - ptr = hex2mem(ptr, &temp, 4); - asm volatile("movgs %0,scr0" :: "r"(temp)); - ptr = hex2mem(ptr, &temp, 4); - asm volatile("movgs %0,scr1" :: "r"(temp)); - ptr = hex2mem(ptr, &temp, 4); - asm volatile("movgs %0,scr2" :: "r"(temp)); - ptr = hex2mem(ptr, &temp, 4); - asm volatile("movgs %0,scr3" :: "r"(temp)); - - ptr = hex2mem(ptr, &__debug_frame->lr, 4); - ptr = hex2mem(ptr, &__debug_frame->lcr, 4); - - ptr = hex2mem(ptr, &__debug_frame->iacc0, 8); - - ptr = hex2mem(ptr, &__debug_user_context->f.fsr[0], 4); - - for (loop = 0; loop <= 7; loop++) - ptr = hex2mem(ptr, &__debug_user_context->f.acc[loop], 4); - - ptr = hex2mem(ptr, &__debug_user_context->f.accg, 8); - - for (loop = 0; loop <= 1; loop++) - ptr = hex2mem(ptr, &__debug_user_context->f.msr[loop], 4); - - ptr = hex2mem(ptr, &__debug_frame->gner0, 4); - ptr = hex2mem(ptr, &__debug_frame->gner1, 4); - - ptr = hex2mem(ptr, &__debug_user_context->f.fner[0], 4); - ptr = hex2mem(ptr, &__debug_user_context->f.fner[1], 4); - - gdbstub_strcpy(output_buffer,"OK"); - break; - - /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */ - case 'm': - ptr = &input_buffer[1]; - - if (hexToInt(&ptr, &addr) && - *ptr++ == ',' && - hexToInt(&ptr, &length) - ) { - if (mem2hex((char *)addr, output_buffer, length, 1)) - break; - gdbstub_strcpy (output_buffer, "E03"); - } - else { - gdbstub_strcpy(output_buffer,"E01"); - } - break; - - /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */ - case 'M': - ptr = &input_buffer[1]; - - if (hexToInt(&ptr, &addr) && - *ptr++ == ',' && - hexToInt(&ptr, &length) && - *ptr++ == ':' - ) { - if (hex2mem(ptr, (char *)addr, length)) { - gdbstub_strcpy(output_buffer, "OK"); - } - else { - gdbstub_strcpy(output_buffer, "E03"); - } - } - else - gdbstub_strcpy(output_buffer, "E02"); - - flush_cache = 1; - break; - - /* pNN: Read value of reg N and return it */ - case 'p': - /* return no value, indicating that we don't support - * this command and that gdb should use 'g' instead */ - break; - - /* PNN,=RRRRRRRR: Write value R to reg N return OK */ - case 'P': - ptr = &input_buffer[1]; - - if (!hexToInt(&ptr, &addr) || - *ptr++ != '=' || - !hexToInt(&ptr, &temp) - ) { - gdbstub_strcpy(output_buffer, "E01"); - break; - } - - temp2 = 1; - switch (addr) { - case GDB_REG_GR(0): - break; - case GDB_REG_GR(1) ... GDB_REG_GR(63): - __debug_user_context->i.gr[addr - GDB_REG_GR(0)] = temp; - break; - case GDB_REG_FR(0) ... GDB_REG_FR(63): - __debug_user_context->f.fr[addr - GDB_REG_FR(0)] = temp; - break; - case GDB_REG_PC: - __debug_user_context->i.pc = temp; - break; - case GDB_REG_PSR: - __debug_user_context->i.psr = temp; - break; - case GDB_REG_CCR: - __debug_user_context->i.ccr = temp; - break; - case GDB_REG_CCCR: - __debug_user_context->i.cccr = temp; - break; - case GDB_REG_BRR: - __debug_status.brr = temp; - break; - case GDB_REG_LR: - __debug_user_context->i.lr = temp; - break; - case GDB_REG_LCR: - __debug_user_context->i.lcr = temp; - break; - case GDB_REG_FSR0: - __debug_user_context->f.fsr[0] = temp; - break; - case GDB_REG_ACC(0) ... GDB_REG_ACC(7): - __debug_user_context->f.acc[addr - GDB_REG_ACC(0)] = temp; - break; - case GDB_REG_ACCG(0): - *(uint32_t *) &__debug_user_context->f.accg[0] = temp; - break; - case GDB_REG_ACCG(4): - *(uint32_t *) &__debug_user_context->f.accg[4] = temp; - break; - case GDB_REG_MSR(0) ... GDB_REG_MSR(1): - __debug_user_context->f.msr[addr - GDB_REG_MSR(0)] = temp; - break; - case GDB_REG_GNER(0) ... GDB_REG_GNER(1): - __debug_user_context->i.gner[addr - GDB_REG_GNER(0)] = temp; - break; - case GDB_REG_FNER(0) ... GDB_REG_FNER(1): - __debug_user_context->f.fner[addr - GDB_REG_FNER(0)] = temp; - break; - default: - temp2 = 0; - break; - } - - if (temp2) { - gdbstub_strcpy(output_buffer, "OK"); - } - else { - gdbstub_strcpy(output_buffer, "E02"); - } - break; - - /* cAA..AA Continue at address AA..AA(optional) */ - case 'c': - /* try to read optional parameter, pc unchanged if no parm */ - ptr = &input_buffer[1]; - if (hexToInt(&ptr, &addr)) - __debug_frame->pc = addr; - goto done; - - /* kill the program */ - case 'k' : - goto done; /* just continue */ - - /* detach */ - case 'D': - gdbstub_strcpy(output_buffer, "OK"); - break; - - /* reset the whole machine (FIXME: system dependent) */ - case 'r': - break; - - - /* step to next instruction */ - case 's': - __debug_regs->dcr |= DCR_SE; - __debug_status.dcr |= DCR_SE; - goto done; - - /* extended command */ - case 'v': - if (strcmp(input_buffer, "vCont?") == 0) { - output_buffer[0] = 0; - break; - } - goto unsupported_cmd; - - /* set baud rate (bBB) */ - case 'b': - ptr = &input_buffer[1]; - if (!hexToInt(&ptr, &temp)) { - gdbstub_strcpy(output_buffer,"B01"); - break; - } - - if (temp) { - /* ack before changing speed */ - gdbstub_send_packet("OK"); - gdbstub_set_baud(temp); - } - break; - - /* set breakpoint */ - case 'Z': - ptr = &input_buffer[1]; - - if (!hexToInt(&ptr,&temp) || *ptr++ != ',' || - !hexToInt(&ptr,&addr) || *ptr++ != ',' || - !hexToInt(&ptr,&length) - ) { - gdbstub_strcpy(output_buffer,"E01"); - break; - } - - if (temp >= 5) { - gdbstub_strcpy(output_buffer,"E03"); - break; - } - - if (gdbstub_set_breakpoint(temp, addr, length) < 0) { - gdbstub_strcpy(output_buffer,"E03"); - break; - } - - if (temp == 0) - flush_cache = 1; /* soft bkpt by modified memory */ - - gdbstub_strcpy(output_buffer,"OK"); - break; - - /* clear breakpoint */ - case 'z': - ptr = &input_buffer[1]; - - if (!hexToInt(&ptr,&temp) || *ptr++ != ',' || - !hexToInt(&ptr,&addr) || *ptr++ != ',' || - !hexToInt(&ptr,&length) - ) { - gdbstub_strcpy(output_buffer,"E01"); - break; - } - - if (temp >= 5) { - gdbstub_strcpy(output_buffer,"E03"); - break; - } - - if (gdbstub_clear_breakpoint(temp, addr, length) < 0) { - gdbstub_strcpy(output_buffer,"E03"); - break; - } - - if (temp == 0) - flush_cache = 1; /* soft bkpt by modified memory */ - - gdbstub_strcpy(output_buffer,"OK"); - break; - - /* Thread-setting packet */ - case 'H': - gdbstub_strcpy(output_buffer, "OK"); - break; - - case 'q': - gdbstub_handle_query(); - break; - - default: - unsupported_cmd: - gdbstub_proto("### GDB Unsupported Cmd '%s'\n",input_buffer); - gdbstub_strcpy(output_buffer,"E01"); - break; - } - - /* reply to the request */ - LEDS(0x5009); - gdbstub_send_packet(output_buffer); - } - - done: - restore_user_regs(&__debug_frame0->uc); - - //gdbstub_dump_debugregs(); - //gdbstub_printk("<-- gdbstub() %08x\n", __debug_frame->pc); - - /* need to flush the instruction cache before resuming, as we may have - * deposited a breakpoint, and the icache probably has no way of - * knowing that a data ref to some location may have changed something - * that is in the instruction cache. NB: We flush both caches, just to - * be sure... - */ - - /* note: flushing the icache will clobber EAR0 on the FR451 */ - if (flush_cache) - gdbstub_purge_cache(); - - LEDS(0x5666); - -} /* end gdbstub() */ - -/*****************************************************************************/ -/* - * initialise the GDB stub - */ -void __init gdbstub_init(void) -{ -#ifdef CONFIG_GDBSTUB_IMMEDIATE - unsigned char ch; - int ret; -#endif - - gdbstub_printk("%s", gdbstub_banner); - - gdbstub_io_init(); - - /* try to talk to GDB (or anyone insane enough to want to type GDB protocol by hand) */ - gdbstub_proto("### GDB Tx ACK\n"); - gdbstub_tx_char('+'); /* 'hello world' */ - -#ifdef CONFIG_GDBSTUB_IMMEDIATE - gdbstub_printk("GDB Stub waiting for packet\n"); - - /* - * In case GDB is started before us, ack any packets - * (presumably "$?#xx") sitting there. - */ - do { gdbstub_rx_char(&ch, 0); } while (ch != '$'); - do { gdbstub_rx_char(&ch, 0); } while (ch != '#'); - do { ret = gdbstub_rx_char(&ch, 0); } while (ret != 0); /* eat first csum byte */ - do { ret = gdbstub_rx_char(&ch, 0); } while (ret != 0); /* eat second csum byte */ - - gdbstub_proto("### GDB Tx NAK\n"); - gdbstub_tx_char('-'); /* nak it */ - -#else - gdbstub_printk("GDB Stub set\n"); -#endif - -#if 0 - /* send banner */ - ptr = output_buffer; - *ptr++ = 'O'; - ptr = mem2hex(gdbstub_banner, ptr, sizeof(gdbstub_banner) - 1, 0); - gdbstub_send_packet(output_buffer); -#endif -#if defined(CONFIG_GDB_CONSOLE) && defined(CONFIG_GDBSTUB_IMMEDIATE) - register_console(&gdbstub_console); -#endif - -} /* end gdbstub_init() */ - -/*****************************************************************************/ -/* - * register the console at a more appropriate time - */ -#if defined (CONFIG_GDB_CONSOLE) && !defined(CONFIG_GDBSTUB_IMMEDIATE) -static int __init gdbstub_postinit(void) -{ - printk("registering console\n"); - register_console(&gdbstub_console); - return 0; -} /* end gdbstub_postinit() */ - -__initcall(gdbstub_postinit); -#endif - -/*****************************************************************************/ -/* - * send an exit message to GDB - */ -void gdbstub_exit(int status) -{ - unsigned char checksum; - int count; - unsigned char ch; - - sprintf(output_buffer,"W%02x",status&0xff); - - gdbstub_tx_char('$'); - checksum = 0; - count = 0; - - while ((ch = output_buffer[count]) != 0) { - gdbstub_tx_char(ch); - checksum += ch; - count += 1; - } - - gdbstub_tx_char('#'); - gdbstub_tx_char(hex_asc_hi(checksum)); - gdbstub_tx_char(hex_asc_lo(checksum)); - - /* make sure the output is flushed, or else RedBoot might clobber it */ - gdbstub_tx_char('-'); - gdbstub_tx_flush(); - -} /* end gdbstub_exit() */ - -/*****************************************************************************/ -/* - * GDB wants to call malloc() and free() to allocate memory for calling kernel - * functions directly from its command line - */ -static void *malloc(size_t size) __maybe_unused; -static void *malloc(size_t size) -{ - return kmalloc(size, GFP_ATOMIC); -} - -static void free(void *p) __maybe_unused; -static void free(void *p) -{ - kfree(p); -} - -static uint32_t ___get_HSR0(void) __maybe_unused; -static uint32_t ___get_HSR0(void) -{ - return __get_HSR(0); -} - -static uint32_t ___set_HSR0(uint32_t x) __maybe_unused; -static uint32_t ___set_HSR0(uint32_t x) -{ - __set_HSR(0, x); - return __get_HSR(0); -} diff --git a/arch/frv/kernel/head-mmu-fr451.S b/arch/frv/kernel/head-mmu-fr451.S deleted file mode 100644 index 98f87d586e59..000000000000 --- a/arch/frv/kernel/head-mmu-fr451.S +++ /dev/null @@ -1,374 +0,0 @@ -/* head-mmu-fr451.S: FR451 mmu-linux specific bits of initialisation - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/linkage.h> -#include <asm/ptrace.h> -#include <asm/page.h> -#include <asm/mem-layout.h> -#include <asm/spr-regs.h> -#include <asm/mb86943a.h> -#include "head.inc" - - -#define __400_DBR0 0xfe000e00 -#define __400_DBR1 0xfe000e08 -#define __400_DBR2 0xfe000e10 -#define __400_DBR3 0xfe000e18 -#define __400_DAM0 0xfe000f00 -#define __400_DAM1 0xfe000f08 -#define __400_DAM2 0xfe000f10 -#define __400_DAM3 0xfe000f18 -#define __400_LGCR 0xfe000010 -#define __400_LCR 0xfe000100 -#define __400_LSBR 0xfe000c00 - - __INIT - .balign 4 - -############################################################################### -# -# describe the position and layout of the SDRAM controller registers -# -# ENTRY: EXIT: -# GR5 - cacheline size -# GR11 - displacement of 2nd SDRAM addr reg from GR14 -# GR12 - displacement of 3rd SDRAM addr reg from GR14 -# GR13 - displacement of 4th SDRAM addr reg from GR14 -# GR14 - address of 1st SDRAM addr reg -# GR15 - amount to shift address by to match SDRAM addr reg -# GR26 &__head_reference [saved] -# GR30 LED address [saved] -# CC0 - T if DBR0 is present -# CC1 - T if DBR1 is present -# CC2 - T if DBR2 is present -# CC3 - T if DBR3 is present -# -############################################################################### - .globl __head_fr451_describe_sdram -__head_fr451_describe_sdram: - sethi.p %hi(__400_DBR0),gr14 - setlo %lo(__400_DBR0),gr14 - setlos.p #__400_DBR1-__400_DBR0,gr11 - setlos #__400_DBR2-__400_DBR0,gr12 - setlos.p #__400_DBR3-__400_DBR0,gr13 - setlos #32,gr5 ; cacheline size - setlos.p #0,gr15 ; amount to shift addr reg by - setlos #0x00ff,gr4 - movgs gr4,cccr ; extant DARS/DAMK regs - bralr - -############################################################################### -# -# rearrange the bus controller registers -# -# ENTRY: EXIT: -# GR26 &__head_reference [saved] -# GR30 LED address revised LED address -# -############################################################################### - .globl __head_fr451_set_busctl -__head_fr451_set_busctl: - sethi.p %hi(__400_LGCR),gr4 - setlo %lo(__400_LGCR),gr4 - sethi.p %hi(__400_LSBR),gr10 - setlo %lo(__400_LSBR),gr10 - sethi.p %hi(__400_LCR),gr11 - setlo %lo(__400_LCR),gr11 - - # set the bus controller - ldi @(gr4,#0),gr5 - ori gr5,#0xff,gr5 ; make sure all chip-selects are enabled - sti gr5,@(gr4,#0) - - sethi.p %hi(__region_CS1),gr4 - setlo %lo(__region_CS1),gr4 - sethi.p %hi(__region_CS1_M),gr5 - setlo %lo(__region_CS1_M),gr5 - sethi.p %hi(__region_CS1_C),gr6 - setlo %lo(__region_CS1_C),gr6 - sti gr4,@(gr10,#1*0x08) - sti gr5,@(gr10,#1*0x08+0x100) - sti gr6,@(gr11,#1*0x08) - sethi.p %hi(__region_CS2),gr4 - setlo %lo(__region_CS2),gr4 - sethi.p %hi(__region_CS2_M),gr5 - setlo %lo(__region_CS2_M),gr5 - sethi.p %hi(__region_CS2_C),gr6 - setlo %lo(__region_CS2_C),gr6 - sti gr4,@(gr10,#2*0x08) - sti gr5,@(gr10,#2*0x08+0x100) - sti gr6,@(gr11,#2*0x08) - sethi.p %hi(__region_CS3),gr4 - setlo %lo(__region_CS3),gr4 - sethi.p %hi(__region_CS3_M),gr5 - setlo %lo(__region_CS3_M),gr5 - sethi.p %hi(__region_CS3_C),gr6 - setlo %lo(__region_CS3_C),gr6 - sti gr4,@(gr10,#3*0x08) - sti gr5,@(gr10,#3*0x08+0x100) - sti gr6,@(gr11,#3*0x08) - sethi.p %hi(__region_CS4),gr4 - setlo %lo(__region_CS4),gr4 - sethi.p %hi(__region_CS4_M),gr5 - setlo %lo(__region_CS4_M),gr5 - sethi.p %hi(__region_CS4_C),gr6 - setlo %lo(__region_CS4_C),gr6 - sti gr4,@(gr10,#4*0x08) - sti gr5,@(gr10,#4*0x08+0x100) - sti gr6,@(gr11,#4*0x08) - sethi.p %hi(__region_CS5),gr4 - setlo %lo(__region_CS5),gr4 - sethi.p %hi(__region_CS5_M),gr5 - setlo %lo(__region_CS5_M),gr5 - sethi.p %hi(__region_CS5_C),gr6 - setlo %lo(__region_CS5_C),gr6 - sti gr4,@(gr10,#5*0x08) - sti gr5,@(gr10,#5*0x08+0x100) - sti gr6,@(gr11,#5*0x08) - sethi.p %hi(__region_CS6),gr4 - setlo %lo(__region_CS6),gr4 - sethi.p %hi(__region_CS6_M),gr5 - setlo %lo(__region_CS6_M),gr5 - sethi.p %hi(__region_CS6_C),gr6 - setlo %lo(__region_CS6_C),gr6 - sti gr4,@(gr10,#6*0x08) - sti gr5,@(gr10,#6*0x08+0x100) - sti gr6,@(gr11,#6*0x08) - sethi.p %hi(__region_CS7),gr4 - setlo %lo(__region_CS7),gr4 - sethi.p %hi(__region_CS7_M),gr5 - setlo %lo(__region_CS7_M),gr5 - sethi.p %hi(__region_CS7_C),gr6 - setlo %lo(__region_CS7_C),gr6 - sti gr4,@(gr10,#7*0x08) - sti gr5,@(gr10,#7*0x08+0x100) - sti gr6,@(gr11,#7*0x08) - membar - bar - - # adjust LED bank address -#ifdef CONFIG_MB93091_VDK - sethi.p %hi(__region_CS2 + 0x01200004),gr30 - setlo %lo(__region_CS2 + 0x01200004),gr30 -#endif - bralr - -############################################################################### -# -# determine the total SDRAM size -# -# ENTRY: EXIT: -# GR25 - SDRAM size -# GR26 &__head_reference [saved] -# GR30 LED address [saved] -# -############################################################################### - .globl __head_fr451_survey_sdram -__head_fr451_survey_sdram: - sethi.p %hi(__400_DAM0),gr11 - setlo %lo(__400_DAM0),gr11 - sethi.p %hi(__400_DBR0),gr12 - setlo %lo(__400_DBR0),gr12 - - sethi.p %hi(0xfe000000),gr17 ; unused SDRAM DBR value - setlo %lo(0xfe000000),gr17 - setlos #0,gr25 - - ldi @(gr12,#0x00),gr4 ; DAR0 - subcc gr4,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS0 - ldi @(gr11,#0x00),gr6 ; DAM0: bits 31:20 match addr 31:20 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS0: - - ldi @(gr12,#0x08),gr4 ; DAR1 - subcc gr4,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS1 - ldi @(gr11,#0x08),gr6 ; DAM1: bits 31:20 match addr 31:20 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS1: - - ldi @(gr12,#0x10),gr4 ; DAR2 - subcc gr4,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS2 - ldi @(gr11,#0x10),gr6 ; DAM2: bits 31:20 match addr 31:20 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS2: - - ldi @(gr12,#0x18),gr4 ; DAR3 - subcc gr4,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS3 - ldi @(gr11,#0x18),gr6 ; DAM3: bits 31:20 match addr 31:20 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS3: - bralr - -############################################################################### -# -# set the protection map with the I/DAMPR registers -# -# ENTRY: EXIT: -# GR25 SDRAM size [saved] -# GR26 &__head_reference [saved] -# GR30 LED address [saved] -# -# -# Using this map: -# REGISTERS ADDRESS RANGE VIEW -# =============== ====================== =============================== -# IAMPR0/DAMPR0 0xC0000000-0xCFFFFFFF Cached kernel RAM Window -# DAMPR11 0xE0000000-0xFFFFFFFF Uncached I/O -# -############################################################################### - .globl __head_fr451_set_protection -__head_fr451_set_protection: - movsg lr,gr27 - - # set the I/O region protection registers for FR451 in MMU mode -#define PGPROT_IO xAMPRx_L|xAMPRx_M|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V - - sethi.p %hi(__region_IO),gr5 - setlo %lo(__region_IO),gr5 - setlos #PGPROT_IO|xAMPRx_SS_512Mb,gr4 - or gr4,gr5,gr4 - movgs gr5,damlr11 ; General I/O tile - movgs gr4,dampr11 - - # need to open a window onto at least part of the RAM for the kernel's use - sethi.p %hi(__sdram_base),gr8 - setlo %lo(__sdram_base),gr8 ; physical address - sethi.p %hi(__page_offset),gr9 - setlo %lo(__page_offset),gr9 ; virtual address - - setlos #xAMPRx_L|xAMPRx_M|xAMPRx_SS_256Mb|xAMPRx_S_KERNEL|xAMPRx_V,gr11 - or gr8,gr11,gr8 - - movgs gr9,iamlr0 ; mapped from real address 0 - movgs gr8,iampr0 ; cached kernel memory at 0xC0000000 - movgs gr9,damlr0 - movgs gr8,dampr0 - - # set a temporary mapping for the kernel running at address 0 until we've turned on the MMU - sethi.p %hi(__sdram_base),gr9 - setlo %lo(__sdram_base),gr9 ; virtual address - - and.p gr4,gr11,gr4 - and gr5,gr11,gr5 - or.p gr4,gr11,gr4 - or gr5,gr11,gr5 - - movgs gr9,iamlr1 ; mapped from real address 0 - movgs gr8,iampr1 ; cached kernel memory at 0x00000000 - movgs gr9,damlr1 - movgs gr8,dampr1 - - # we use DAMR2-10 for kmap_atomic(), cache flush and TLB management - # since the DAMLR regs are not going to change, we can set them now - # also set up IAMLR2 to the same as DAMLR5 - sethi.p %hi(KMAP_ATOMIC_PRIMARY_FRAME),gr4 - setlo %lo(KMAP_ATOMIC_PRIMARY_FRAME),gr4 - sethi.p %hi(PAGE_SIZE),gr5 - setlo %lo(PAGE_SIZE),gr5 - - movgs gr4,damlr2 - movgs gr4,iamlr2 - add gr4,gr5,gr4 - movgs gr4,damlr3 - add gr4,gr5,gr4 - movgs gr4,damlr4 - add gr4,gr5,gr4 - movgs gr4,damlr5 - add gr4,gr5,gr4 - movgs gr4,damlr6 - add gr4,gr5,gr4 - movgs gr4,damlr7 - add gr4,gr5,gr4 - movgs gr4,damlr8 - add gr4,gr5,gr4 - movgs gr4,damlr9 - add gr4,gr5,gr4 - movgs gr4,damlr10 - - movgs gr0,dampr2 - movgs gr0,dampr4 - movgs gr0,dampr5 - movgs gr0,dampr6 - movgs gr0,dampr7 - movgs gr0,dampr8 - movgs gr0,dampr9 - movgs gr0,dampr10 - - movgs gr0,iamlr3 - movgs gr0,iamlr4 - movgs gr0,iamlr5 - movgs gr0,iamlr6 - movgs gr0,iamlr7 - - movgs gr0,iampr2 - movgs gr0,iampr3 - movgs gr0,iampr4 - movgs gr0,iampr5 - movgs gr0,iampr6 - movgs gr0,iampr7 - - # start in TLB context 0 with the swapper's page tables - movgs gr0,cxnr - - sethi.p %hi(swapper_pg_dir),gr4 - setlo %lo(swapper_pg_dir),gr4 - sethi.p %hi(__page_offset),gr5 - setlo %lo(__page_offset),gr5 - sub gr4,gr5,gr4 - movgs gr4,ttbr - setlos #xAMPRx_L|xAMPRx_M|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr5 - or gr4,gr5,gr4 - movgs gr4,dampr3 - - # the FR451 also has an extra trap base register - movsg tbr,gr4 - movgs gr4,btbr - - LEDS 0x3300 - jmpl @(gr27,gr0) - -############################################################################### -# -# finish setting up the protection registers -# -############################################################################### - .globl __head_fr451_finalise_protection -__head_fr451_finalise_protection: - # turn on the timers as appropriate - movgs gr0,timerh - movgs gr0,timerl - movgs gr0,timerd - movsg hsr0,gr4 - sethi.p %hi(HSR0_ETMI),gr5 - setlo %lo(HSR0_ETMI),gr5 - or gr4,gr5,gr4 - movgs gr4,hsr0 - - # clear the TLB entry cache - movgs gr0,iamlr1 - movgs gr0,iampr1 - movgs gr0,damlr1 - movgs gr0,dampr1 - - # clear the PGE cache - sethi.p %hi(__flush_tlb_all),gr4 - setlo %lo(__flush_tlb_all),gr4 - jmpl @(gr4,gr0) diff --git a/arch/frv/kernel/head-uc-fr401.S b/arch/frv/kernel/head-uc-fr401.S deleted file mode 100644 index 438643cfa38e..000000000000 --- a/arch/frv/kernel/head-uc-fr401.S +++ /dev/null @@ -1,311 +0,0 @@ -/* head-uc-fr401.S: FR401/3/5 uc-linux specific bits of initialisation - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/linkage.h> -#include <asm/ptrace.h> -#include <asm/page.h> -#include <asm/spr-regs.h> -#include <asm/mb86943a.h> -#include "head.inc" - - -#define __400_DBR0 0xfe000e00 -#define __400_DBR1 0xfe000e08 -#define __400_DBR2 0xfe000e10 /* not on FR401 */ -#define __400_DBR3 0xfe000e18 /* not on FR401 */ -#define __400_DAM0 0xfe000f00 -#define __400_DAM1 0xfe000f08 -#define __400_DAM2 0xfe000f10 /* not on FR401 */ -#define __400_DAM3 0xfe000f18 /* not on FR401 */ -#define __400_LGCR 0xfe000010 -#define __400_LCR 0xfe000100 -#define __400_LSBR 0xfe000c00 - - __INIT - .balign 4 - -############################################################################### -# -# describe the position and layout of the SDRAM controller registers -# -# ENTRY: EXIT: -# GR5 - cacheline size -# GR11 - displacement of 2nd SDRAM addr reg from GR14 -# GR12 - displacement of 3rd SDRAM addr reg from GR14 -# GR13 - displacement of 4th SDRAM addr reg from GR14 -# GR14 - address of 1st SDRAM addr reg -# GR15 - amount to shift address by to match SDRAM addr reg -# GR26 &__head_reference [saved] -# GR30 LED address [saved] -# CC0 - T if DBR0 is present -# CC1 - T if DBR1 is present -# CC2 - T if DBR2 is present (not FR401/FR401A) -# CC3 - T if DBR3 is present (not FR401/FR401A) -# -############################################################################### - .globl __head_fr401_describe_sdram -__head_fr401_describe_sdram: - sethi.p %hi(__400_DBR0),gr14 - setlo %lo(__400_DBR0),gr14 - setlos.p #__400_DBR1-__400_DBR0,gr11 - setlos #__400_DBR2-__400_DBR0,gr12 - setlos.p #__400_DBR3-__400_DBR0,gr13 - setlos #32,gr5 ; cacheline size - setlos.p #0,gr15 ; amount to shift addr reg by - - # specify which DBR regs are present - setlos #0x00ff,gr4 - movgs gr4,cccr - movsg psr,gr3 ; check for FR401/FR401A - srli gr3,#25,gr3 - subicc gr3,#0x20>>1,gr0,icc0 - bnelr icc0,#1 - setlos #0x000f,gr4 - movgs gr4,cccr - bralr - -############################################################################### -# -# rearrange the bus controller registers -# -# ENTRY: EXIT: -# GR26 &__head_reference [saved] -# GR30 LED address revised LED address -# -############################################################################### - .globl __head_fr401_set_busctl -__head_fr401_set_busctl: - sethi.p %hi(__400_LGCR),gr4 - setlo %lo(__400_LGCR),gr4 - sethi.p %hi(__400_LSBR),gr10 - setlo %lo(__400_LSBR),gr10 - sethi.p %hi(__400_LCR),gr11 - setlo %lo(__400_LCR),gr11 - - # set the bus controller - ldi @(gr4,#0),gr5 - ori gr5,#0xff,gr5 ; make sure all chip-selects are enabled - sti gr5,@(gr4,#0) - - sethi.p %hi(__region_CS1),gr4 - setlo %lo(__region_CS1),gr4 - sethi.p %hi(__region_CS1_M),gr5 - setlo %lo(__region_CS1_M),gr5 - sethi.p %hi(__region_CS1_C),gr6 - setlo %lo(__region_CS1_C),gr6 - sti gr4,@(gr10,#1*0x08) - sti gr5,@(gr10,#1*0x08+0x100) - sti gr6,@(gr11,#1*0x08) - sethi.p %hi(__region_CS2),gr4 - setlo %lo(__region_CS2),gr4 - sethi.p %hi(__region_CS2_M),gr5 - setlo %lo(__region_CS2_M),gr5 - sethi.p %hi(__region_CS2_C),gr6 - setlo %lo(__region_CS2_C),gr6 - sti gr4,@(gr10,#2*0x08) - sti gr5,@(gr10,#2*0x08+0x100) - sti gr6,@(gr11,#2*0x08) - sethi.p %hi(__region_CS3),gr4 - setlo %lo(__region_CS3),gr4 - sethi.p %hi(__region_CS3_M),gr5 - setlo %lo(__region_CS3_M),gr5 - sethi.p %hi(__region_CS3_C),gr6 - setlo %lo(__region_CS3_C),gr6 - sti gr4,@(gr10,#3*0x08) - sti gr5,@(gr10,#3*0x08+0x100) - sti gr6,@(gr11,#3*0x08) - sethi.p %hi(__region_CS4),gr4 - setlo %lo(__region_CS4),gr4 - sethi.p %hi(__region_CS4_M),gr5 - setlo %lo(__region_CS4_M),gr5 - sethi.p %hi(__region_CS4_C),gr6 - setlo %lo(__region_CS4_C),gr6 - sti gr4,@(gr10,#4*0x08) - sti gr5,@(gr10,#4*0x08+0x100) - sti gr6,@(gr11,#4*0x08) - sethi.p %hi(__region_CS5),gr4 - setlo %lo(__region_CS5),gr4 - sethi.p %hi(__region_CS5_M),gr5 - setlo %lo(__region_CS5_M),gr5 - sethi.p %hi(__region_CS5_C),gr6 - setlo %lo(__region_CS5_C),gr6 - sti gr4,@(gr10,#5*0x08) - sti gr5,@(gr10,#5*0x08+0x100) - sti gr6,@(gr11,#5*0x08) - sethi.p %hi(__region_CS6),gr4 - setlo %lo(__region_CS6),gr4 - sethi.p %hi(__region_CS6_M),gr5 - setlo %lo(__region_CS6_M),gr5 - sethi.p %hi(__region_CS6_C),gr6 - setlo %lo(__region_CS6_C),gr6 - sti gr4,@(gr10,#6*0x08) - sti gr5,@(gr10,#6*0x08+0x100) - sti gr6,@(gr11,#6*0x08) - sethi.p %hi(__region_CS7),gr4 - setlo %lo(__region_CS7),gr4 - sethi.p %hi(__region_CS7_M),gr5 - setlo %lo(__region_CS7_M),gr5 - sethi.p %hi(__region_CS7_C),gr6 - setlo %lo(__region_CS7_C),gr6 - sti gr4,@(gr10,#7*0x08) - sti gr5,@(gr10,#7*0x08+0x100) - sti gr6,@(gr11,#7*0x08) - membar - bar - - # adjust LED bank address - sethi.p %hi(LED_ADDR - 0x20000000 +__region_CS2),gr30 - setlo %lo(LED_ADDR - 0x20000000 +__region_CS2),gr30 - bralr - -############################################################################### -# -# determine the total SDRAM size -# -# ENTRY: EXIT: -# GR25 - SDRAM size -# GR26 &__head_reference [saved] -# GR30 LED address [saved] -# -############################################################################### - .globl __head_fr401_survey_sdram -__head_fr401_survey_sdram: - sethi.p %hi(__400_DAM0),gr11 - setlo %lo(__400_DAM0),gr11 - sethi.p %hi(__400_DBR0),gr12 - setlo %lo(__400_DBR0),gr12 - - sethi.p %hi(0xfe000000),gr17 ; unused SDRAM DBR value - setlo %lo(0xfe000000),gr17 - setlos #0,gr25 - - ldi @(gr12,#0x00),gr4 ; DAR0 - subcc gr4,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS0 - ldi @(gr11,#0x00),gr6 ; DAM0: bits 31:20 match addr 31:20 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS0: - - ldi @(gr12,#0x08),gr4 ; DAR1 - subcc gr4,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS1 - ldi @(gr11,#0x08),gr6 ; DAM1: bits 31:20 match addr 31:20 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS1: - - # FR401/FR401A does not have DCS2/3 - movsg psr,gr3 - srli gr3,#25,gr3 - subicc gr3,#0x20>>1,gr0,icc0 - beq icc0,#0,__head_no_DCS3 - - ldi @(gr12,#0x10),gr4 ; DAR2 - subcc gr4,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS2 - ldi @(gr11,#0x10),gr6 ; DAM2: bits 31:20 match addr 31:20 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS2: - - ldi @(gr12,#0x18),gr4 ; DAR3 - subcc gr4,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS3 - ldi @(gr11,#0x18),gr6 ; DAM3: bits 31:20 match addr 31:20 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS3: - bralr - -############################################################################### -# -# set the protection map with the I/DAMPR registers -# -# ENTRY: EXIT: -# GR25 SDRAM size [saved] -# GR26 &__head_reference [saved] -# GR30 LED address [saved] -# -############################################################################### - .globl __head_fr401_set_protection -__head_fr401_set_protection: - movsg lr,gr27 - - # set the I/O region protection registers for FR401/3/5 - sethi.p %hi(__region_IO),gr5 - setlo %lo(__region_IO),gr5 - ori gr5,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5 - movgs gr0,iampr7 - movgs gr5,dampr7 ; General I/O tile - - # need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible - # - start with the highest numbered registers - sethi.p %hi(__kernel_image_end),gr8 - setlo %lo(__kernel_image_end),gr8 - sethi.p %hi(32768),gr4 ; allow for a maximal allocator bitmap - setlo %lo(32768),gr4 - add gr8,gr4,gr8 - sethi.p %hi(1024*2048-1),gr4 ; round up to nearest 2MiB - setlo %lo(1024*2048-1),gr4 - add.p gr8,gr4,gr8 - not gr4,gr4 - and gr8,gr4,gr8 - - sethi.p %hi(__page_offset),gr9 - setlo %lo(__page_offset),gr9 - add gr9,gr25,gr9 - - # GR8 = base of uncovered RAM - # GR9 = top of uncovered RAM - -#ifdef CONFIG_MB93093_PDK - sethi.p %hi(__region_CS2),gr4 - setlo %lo(__region_CS2),gr4 - ori gr4,#xAMPRx_SS_1Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr4 - movgs gr4,dampr6 - movgs gr0,iampr6 -#else - call __head_split_region - movgs gr4,iampr6 - movgs gr5,dampr6 -#endif - call __head_split_region - movgs gr4,iampr5 - movgs gr5,dampr5 - call __head_split_region - movgs gr4,iampr4 - movgs gr5,dampr4 - call __head_split_region - movgs gr4,iampr3 - movgs gr5,dampr3 - call __head_split_region - movgs gr4,iampr2 - movgs gr5,dampr2 - call __head_split_region - movgs gr4,iampr1 - movgs gr5,dampr1 - - # cover kernel core image with kernel-only segment - sethi.p %hi(__page_offset),gr8 - setlo %lo(__page_offset),gr8 - call __head_split_region - -#ifdef CONFIG_PROTECT_KERNEL - ori.p gr4,#xAMPRx_S_KERNEL,gr4 - ori gr5,#xAMPRx_S_KERNEL,gr5 -#endif - - movgs gr4,iampr0 - movgs gr5,dampr0 - jmpl @(gr27,gr0) diff --git a/arch/frv/kernel/head-uc-fr451.S b/arch/frv/kernel/head-uc-fr451.S deleted file mode 100644 index b2a76c4a1786..000000000000 --- a/arch/frv/kernel/head-uc-fr451.S +++ /dev/null @@ -1,174 +0,0 @@ -/* head-uc-fr451.S: FR451 uc-linux specific bits of initialisation - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/linkage.h> -#include <asm/ptrace.h> -#include <asm/page.h> -#include <asm/spr-regs.h> -#include <asm/mb86943a.h> -#include "head.inc" - - -#define __400_DBR0 0xfe000e00 -#define __400_DBR1 0xfe000e08 -#define __400_DBR2 0xfe000e10 -#define __400_DBR3 0xfe000e18 -#define __400_DAM0 0xfe000f00 -#define __400_DAM1 0xfe000f08 -#define __400_DAM2 0xfe000f10 -#define __400_DAM3 0xfe000f18 -#define __400_LGCR 0xfe000010 -#define __400_LCR 0xfe000100 -#define __400_LSBR 0xfe000c00 - - __INIT - .balign 4 - -############################################################################### -# -# set the protection map with the I/DAMPR registers -# -# ENTRY: EXIT: -# GR25 SDRAM size [saved] -# GR26 &__head_reference [saved] -# GR30 LED address [saved] -# -############################################################################### - .globl __head_fr451_set_protection -__head_fr451_set_protection: - movsg lr,gr27 - - movgs gr0,dampr10 - movgs gr0,damlr10 - movgs gr0,dampr9 - movgs gr0,damlr9 - movgs gr0,dampr8 - movgs gr0,damlr8 - - # set the I/O region protection registers for FR401/3/5 - sethi.p %hi(__region_IO),gr5 - setlo %lo(__region_IO),gr5 - sethi.p %hi(0x1fffffff),gr7 - setlo %lo(0x1fffffff),gr7 - ori gr5,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5 - movgs gr5,dampr11 ; General I/O tile - movgs gr7,damlr11 - - # need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible - # - start with the highest numbered registers - sethi.p %hi(__kernel_image_end),gr8 - setlo %lo(__kernel_image_end),gr8 - sethi.p %hi(32768),gr4 ; allow for a maximal allocator bitmap - setlo %lo(32768),gr4 - add gr8,gr4,gr8 - sethi.p %hi(1024*2048-1),gr4 ; round up to nearest 2MiB - setlo %lo(1024*2048-1),gr4 - add.p gr8,gr4,gr8 - not gr4,gr4 - and gr8,gr4,gr8 - - sethi.p %hi(__page_offset),gr9 - setlo %lo(__page_offset),gr9 - add gr9,gr25,gr9 - - sethi.p %hi(0xffffc000),gr11 - setlo %lo(0xffffc000),gr11 - - # GR8 = base of uncovered RAM - # GR9 = top of uncovered RAM - # GR11 = xAMLR mask - LEDS 0x3317 - call __head_split_region - movgs gr4,iampr7 - movgs gr6,iamlr7 - movgs gr5,dampr7 - movgs gr7,damlr7 - - LEDS 0x3316 - call __head_split_region - movgs gr4,iampr6 - movgs gr6,iamlr6 - movgs gr5,dampr6 - movgs gr7,damlr6 - - LEDS 0x3315 - call __head_split_region - movgs gr4,iampr5 - movgs gr6,iamlr5 - movgs gr5,dampr5 - movgs gr7,damlr5 - - LEDS 0x3314 - call __head_split_region - movgs gr4,iampr4 - movgs gr6,iamlr4 - movgs gr5,dampr4 - movgs gr7,damlr4 - - LEDS 0x3313 - call __head_split_region - movgs gr4,iampr3 - movgs gr6,iamlr3 - movgs gr5,dampr3 - movgs gr7,damlr3 - - LEDS 0x3312 - call __head_split_region - movgs gr4,iampr2 - movgs gr6,iamlr2 - movgs gr5,dampr2 - movgs gr7,damlr2 - - LEDS 0x3311 - call __head_split_region - movgs gr4,iampr1 - movgs gr6,iamlr1 - movgs gr5,dampr1 - movgs gr7,damlr1 - - # cover kernel core image with kernel-only segment - LEDS 0x3310 - sethi.p %hi(__page_offset),gr8 - setlo %lo(__page_offset),gr8 - call __head_split_region - -#ifdef CONFIG_PROTECT_KERNEL - ori.p gr4,#xAMPRx_S_KERNEL,gr4 - ori gr5,#xAMPRx_S_KERNEL,gr5 -#endif - - movgs gr4,iampr0 - movgs gr6,iamlr0 - movgs gr5,dampr0 - movgs gr7,damlr0 - - # start in TLB context 0 with no page tables - movgs gr0,cxnr - movgs gr0,ttbr - - # the FR451 also has an extra trap base register - movsg tbr,gr4 - movgs gr4,btbr - - # turn on the timers as appropriate - movgs gr0,timerh - movgs gr0,timerl - movgs gr0,timerd - movsg hsr0,gr4 - sethi.p %hi(HSR0_ETMI),gr5 - setlo %lo(HSR0_ETMI),gr5 - or gr4,gr5,gr4 - movgs gr4,hsr0 - - LEDS 0x3300 - jmpl @(gr27,gr0) diff --git a/arch/frv/kernel/head-uc-fr555.S b/arch/frv/kernel/head-uc-fr555.S deleted file mode 100644 index 5497aaf34f77..000000000000 --- a/arch/frv/kernel/head-uc-fr555.S +++ /dev/null @@ -1,347 +0,0 @@ -/* head-uc-fr555.S: FR555 uc-linux specific bits of initialisation - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/linkage.h> -#include <asm/ptrace.h> -#include <asm/page.h> -#include <asm/spr-regs.h> -#include <asm/mb86943a.h> -#include "head.inc" - - -#define __551_DARS0 0xfeff0100 -#define __551_DARS1 0xfeff0104 -#define __551_DARS2 0xfeff0108 -#define __551_DARS3 0xfeff010c -#define __551_DAMK0 0xfeff0110 -#define __551_DAMK1 0xfeff0114 -#define __551_DAMK2 0xfeff0118 -#define __551_DAMK3 0xfeff011c -#define __551_LCR 0xfeff1100 -#define __551_LSBR 0xfeff1c00 - - __INIT - .balign 4 - -############################################################################### -# -# describe the position and layout of the SDRAM controller registers -# -# ENTRY: EXIT: -# GR5 - cacheline size -# GR11 - displacement of 2nd SDRAM addr reg from GR14 -# GR12 - displacement of 3rd SDRAM addr reg from GR14 -# GR13 - displacement of 4th SDRAM addr reg from GR14 -# GR14 - address of 1st SDRAM addr reg -# GR15 - amount to shift address by to match SDRAM addr reg -# GR26 &__head_reference [saved] -# GR30 LED address [saved] -# CC0 - T if DARS0 is present -# CC1 - T if DARS1 is present -# CC2 - T if DARS2 is present -# CC3 - T if DARS3 is present -# -############################################################################### - .globl __head_fr555_describe_sdram -__head_fr555_describe_sdram: - sethi.p %hi(__551_DARS0),gr14 - setlo %lo(__551_DARS0),gr14 - setlos.p #__551_DARS1-__551_DARS0,gr11 - setlos #__551_DARS2-__551_DARS0,gr12 - setlos.p #__551_DARS3-__551_DARS0,gr13 - setlos #64,gr5 ; cacheline size - setlos #20,gr15 ; amount to shift addr by - setlos #0x00ff,gr4 - movgs gr4,cccr ; extant DARS/DAMK regs - bralr - -############################################################################### -# -# rearrange the bus controller registers -# -# ENTRY: EXIT: -# GR26 &__head_reference [saved] -# GR30 LED address revised LED address -# -############################################################################### - .globl __head_fr555_set_busctl -__head_fr555_set_busctl: - LEDS 0x100f - sethi.p %hi(__551_LSBR),gr10 - setlo %lo(__551_LSBR),gr10 - sethi.p %hi(__551_LCR),gr11 - setlo %lo(__551_LCR),gr11 - - # set the bus controller - sethi.p %hi(__region_CS1),gr4 - setlo %lo(__region_CS1),gr4 - sethi.p %hi(__region_CS1_M),gr5 - setlo %lo(__region_CS1_M),gr5 - sethi.p %hi(__region_CS1_C),gr6 - setlo %lo(__region_CS1_C),gr6 - sti gr4,@(gr10,#1*0x08) - sti gr5,@(gr10,#1*0x08+0x100) - sti gr6,@(gr11,#1*0x08) - sethi.p %hi(__region_CS2),gr4 - setlo %lo(__region_CS2),gr4 - sethi.p %hi(__region_CS2_M),gr5 - setlo %lo(__region_CS2_M),gr5 - sethi.p %hi(__region_CS2_C),gr6 - setlo %lo(__region_CS2_C),gr6 - sti gr4,@(gr10,#2*0x08) - sti gr5,@(gr10,#2*0x08+0x100) - sti gr6,@(gr11,#2*0x08) - sethi.p %hi(__region_CS3),gr4 - setlo %lo(__region_CS3),gr4 - sethi.p %hi(__region_CS3_M),gr5 - setlo %lo(__region_CS3_M),gr5 - sethi.p %hi(__region_CS3_C),gr6 - setlo %lo(__region_CS3_C),gr6 - sti gr4,@(gr10,#3*0x08) - sti gr5,@(gr10,#3*0x08+0x100) - sti gr6,@(gr11,#3*0x08) - sethi.p %hi(__region_CS4),gr4 - setlo %lo(__region_CS4),gr4 - sethi.p %hi(__region_CS4_M),gr5 - setlo %lo(__region_CS4_M),gr5 - sethi.p %hi(__region_CS4_C),gr6 - setlo %lo(__region_CS4_C),gr6 - sti gr4,@(gr10,#4*0x08) - sti gr5,@(gr10,#4*0x08+0x100) - sti gr6,@(gr11,#4*0x08) - sethi.p %hi(__region_CS5),gr4 - setlo %lo(__region_CS5),gr4 - sethi.p %hi(__region_CS5_M),gr5 - setlo %lo(__region_CS5_M),gr5 - sethi.p %hi(__region_CS5_C),gr6 - setlo %lo(__region_CS5_C),gr6 - sti gr4,@(gr10,#5*0x08) - sti gr5,@(gr10,#5*0x08+0x100) - sti gr6,@(gr11,#5*0x08) - sethi.p %hi(__region_CS6),gr4 - setlo %lo(__region_CS6),gr4 - sethi.p %hi(__region_CS6_M),gr5 - setlo %lo(__region_CS6_M),gr5 - sethi.p %hi(__region_CS6_C),gr6 - setlo %lo(__region_CS6_C),gr6 - sti gr4,@(gr10,#6*0x08) - sti gr5,@(gr10,#6*0x08+0x100) - sti gr6,@(gr11,#6*0x08) - sethi.p %hi(__region_CS7),gr4 - setlo %lo(__region_CS7),gr4 - sethi.p %hi(__region_CS7_M),gr5 - setlo %lo(__region_CS7_M),gr5 - sethi.p %hi(__region_CS7_C),gr6 - setlo %lo(__region_CS7_C),gr6 - sti gr4,@(gr10,#7*0x08) - sti gr5,@(gr10,#7*0x08+0x100) - sti gr6,@(gr11,#7*0x08) - membar - bar - - # adjust LED bank address -#ifdef CONFIG_MB93091_VDK - sethi.p %hi(LED_ADDR - 0x20000000 +__region_CS2),gr30 - setlo %lo(LED_ADDR - 0x20000000 +__region_CS2),gr30 -#endif - bralr - -############################################################################### -# -# determine the total SDRAM size -# -# ENTRY: EXIT: -# GR25 - SDRAM size -# GR26 &__head_reference [saved] -# GR30 LED address [saved] -# -############################################################################### - .globl __head_fr555_survey_sdram -__head_fr555_survey_sdram: - sethi.p %hi(__551_DAMK0),gr11 - setlo %lo(__551_DAMK0),gr11 - sethi.p %hi(__551_DARS0),gr12 - setlo %lo(__551_DARS0),gr12 - - sethi.p %hi(0xfff),gr17 ; unused SDRAM AMK value - setlo %lo(0xfff),gr17 - setlos #0,gr25 - - ldi @(gr11,#0x00),gr6 ; DAMK0: bits 11:0 match addr 11:0 - subcc gr6,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS0 - ldi @(gr12,#0x00),gr4 ; DARS0 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS0: - - ldi @(gr11,#0x04),gr6 ; DAMK1: bits 11:0 match addr 11:0 - subcc gr6,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS1 - ldi @(gr12,#0x04),gr4 ; DARS1 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS1: - - ldi @(gr11,#0x8),gr6 ; DAMK2: bits 11:0 match addr 11:0 - subcc gr6,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS2 - ldi @(gr12,#0x8),gr4 ; DARS2 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS2: - - ldi @(gr11,#0xc),gr6 ; DAMK3: bits 11:0 match addr 11:0 - subcc gr6,gr17,gr0,icc0 - beq icc0,#0,__head_no_DCS3 - ldi @(gr12,#0xc),gr4 ; DARS3 - add gr25,gr6,gr25 - addi gr25,#1,gr25 -__head_no_DCS3: - - slli gr25,#20,gr25 ; shift [11:0] -> [31:20] - bralr - -############################################################################### -# -# set the protection map with the I/DAMPR registers -# -# ENTRY: EXIT: -# GR25 SDRAM size saved -# GR30 LED address saved -# -############################################################################### - .globl __head_fr555_set_protection -__head_fr555_set_protection: - movsg lr,gr27 - - sethi.p %hi(0xfff00000),gr11 - setlo %lo(0xfff00000),gr11 - - # set the I/O region protection registers for FR555 - sethi.p %hi(__region_IO),gr7 - setlo %lo(__region_IO),gr7 - ori gr7,#xAMPRx_SS_512Mb|xAMPRx_S_KERNEL|xAMPRx_C|xAMPRx_V,gr5 - movgs gr0,iampr15 - movgs gr0,iamlr15 - movgs gr5,dampr15 - movgs gr7,damlr15 - - # need to tile the remaining IAMPR/DAMPR registers to cover as much of the RAM as possible - # - start with the highest numbered registers - sethi.p %hi(__kernel_image_end),gr8 - setlo %lo(__kernel_image_end),gr8 - sethi.p %hi(32768),gr4 ; allow for a maximal allocator bitmap - setlo %lo(32768),gr4 - add gr8,gr4,gr8 - sethi.p %hi(1024*2048-1),gr4 ; round up to nearest 2MiB - setlo %lo(1024*2048-1),gr4 - add.p gr8,gr4,gr8 - not gr4,gr4 - and gr8,gr4,gr8 - - sethi.p %hi(__page_offset),gr9 - setlo %lo(__page_offset),gr9 - add gr9,gr25,gr9 - - # GR8 = base of uncovered RAM - # GR9 = top of uncovered RAM - # GR11 - mask for DAMLR/IAMLR regs - # - call __head_split_region - movgs gr4,iampr14 - movgs gr6,iamlr14 - movgs gr5,dampr14 - movgs gr7,damlr14 - call __head_split_region - movgs gr4,iampr13 - movgs gr6,iamlr13 - movgs gr5,dampr13 - movgs gr7,damlr13 - call __head_split_region - movgs gr4,iampr12 - movgs gr6,iamlr12 - movgs gr5,dampr12 - movgs gr7,damlr12 - call __head_split_region - movgs gr4,iampr11 - movgs gr6,iamlr11 - movgs gr5,dampr11 - movgs gr7,damlr11 - call __head_split_region - movgs gr4,iampr10 - movgs gr6,iamlr10 - movgs gr5,dampr10 - movgs gr7,damlr10 - call __head_split_region - movgs gr4,iampr9 - movgs gr6,iamlr9 - movgs gr5,dampr9 - movgs gr7,damlr9 - call __head_split_region - movgs gr4,iampr8 - movgs gr6,iamlr8 - movgs gr5,dampr8 - movgs gr7,damlr8 - - call __head_split_region - movgs gr4,iampr7 - movgs gr6,iamlr7 - movgs gr5,dampr7 - movgs gr7,damlr7 - call __head_split_region - movgs gr4,iampr6 - movgs gr6,iamlr6 - movgs gr5,dampr6 - movgs gr7,damlr6 - call __head_split_region - movgs gr4,iampr5 - movgs gr6,iamlr5 - movgs gr5,dampr5 - movgs gr7,damlr5 - call __head_split_region - movgs gr4,iampr4 - movgs gr6,iamlr4 - movgs gr5,dampr4 - movgs gr7,damlr4 - call __head_split_region - movgs gr4,iampr3 - movgs gr6,iamlr3 - movgs gr5,dampr3 - movgs gr7,damlr3 - call __head_split_region - movgs gr4,iampr2 - movgs gr6,iamlr2 - movgs gr5,dampr2 - movgs gr7,damlr2 - call __head_split_region - movgs gr4,iampr1 - movgs gr6,iamlr1 - movgs gr5,dampr1 - movgs gr7,damlr1 - - # cover kernel core image with kernel-only segment - sethi.p %hi(__page_offset),gr8 - setlo %lo(__page_offset),gr8 - call __head_split_region - -#ifdef CONFIG_PROTECT_KERNEL - ori.p gr4,#xAMPRx_S_KERNEL,gr4 - ori gr5,#xAMPRx_S_KERNEL,gr5 -#endif - - movgs gr4,iampr0 - movgs gr6,iamlr0 - movgs gr5,dampr0 - movgs gr7,damlr0 - jmpl @(gr27,gr0) diff --git a/arch/frv/kernel/head.S b/arch/frv/kernel/head.S deleted file mode 100644 index a7d0bea9c036..000000000000 --- a/arch/frv/kernel/head.S +++ /dev/null @@ -1,638 +0,0 @@ -/* head.S: kernel entry point for FR-V kernel - * - * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/linkage.h> -#include <asm/thread_info.h> -#include <asm/ptrace.h> -#include <asm/page.h> -#include <asm/spr-regs.h> -#include <asm/mb86943a.h> -#include <asm/cache.h> -#include "head.inc" - -############################################################################### -# -# void _boot(unsigned long magic, char *command_line) __attribute__((noreturn)) -# -# - if magic is 0xdead1eaf, then command_line is assumed to point to the kernel -# command line string -# -############################################################################### - __HEAD - .balign 4 - - .globl _boot, __head_reference - .type _boot,@function -_boot: -__head_reference: - sethi.p %hi(LED_ADDR),gr30 - setlo %lo(LED_ADDR),gr30 - - LEDS 0x0000 - - # calculate reference address for PC-relative stuff - call 0f -0: movsg lr,gr26 - addi gr26,#__head_reference-0b,gr26 - - # invalidate and disable both of the caches and turn off the memory access checking - dcef @(gr0,gr0),1 - bar - - sethi.p %hi(~(HSR0_ICE|HSR0_DCE|HSR0_CBM|HSR0_EIMMU|HSR0_EDMMU)),gr4 - setlo %lo(~(HSR0_ICE|HSR0_DCE|HSR0_CBM|HSR0_EIMMU|HSR0_EDMMU)),gr4 - movsg hsr0,gr5 - and gr4,gr5,gr5 - movgs gr5,hsr0 - movsg hsr0,gr5 - - LEDS 0x0001 - - icei @(gr0,gr0),1 - dcei @(gr0,gr0),1 - bar - - # turn the instruction cache back on - sethi.p %hi(HSR0_ICE),gr4 - setlo %lo(HSR0_ICE),gr4 - movsg hsr0,gr5 - or gr4,gr5,gr5 - movgs gr5,hsr0 - movsg hsr0,gr5 - - bar - - LEDS 0x0002 - - # retrieve the parameters (including command line) before we overwrite them - sethi.p %hi(0xdead1eaf),gr7 - setlo %lo(0xdead1eaf),gr7 - subcc gr7,gr8,gr0,icc0 - bne icc0,#0,__head_no_parameters - - sethi.p %hi(redboot_command_line-1),gr6 - setlo %lo(redboot_command_line-1),gr6 - sethi.p %hi(__head_reference),gr4 - setlo %lo(__head_reference),gr4 - sub gr6,gr4,gr6 - add.p gr6,gr26,gr6 - subi gr9,#1,gr9 - setlos.p #511,gr4 - setlos #1,gr5 - -__head_copy_cmdline: - ldubu.p @(gr9,gr5),gr16 - subicc gr4,#1,gr4,icc0 - stbu.p gr16,@(gr6,gr5) - subicc gr16,#0,gr0,icc1 - bls icc0,#0,__head_end_cmdline - bne icc1,#1,__head_copy_cmdline -__head_end_cmdline: - stbu gr0,@(gr6,gr5) -__head_no_parameters: - -############################################################################### -# -# we need to relocate the SDRAM to 0x00000000 (linux) or 0xC0000000 (uClinux) -# - note that we're going to have to run entirely out of the icache whilst -# fiddling with the SDRAM controller registers -# -############################################################################### -#ifdef CONFIG_MMU - call __head_fr451_describe_sdram - -#else - movsg psr,gr5 - srli gr5,#28,gr5 - subicc gr5,#3,gr0,icc0 - beq icc0,#0,__head_fr551_sdram - - call __head_fr401_describe_sdram - bra __head_do_sdram - -__head_fr551_sdram: - call __head_fr555_describe_sdram - LEDS 0x000d - -__head_do_sdram: -#endif - - # preload the registers with invalid values in case any DBR/DARS are marked not present - sethi.p %hi(0xfe000000),gr17 ; unused SDRAM DBR value - setlo %lo(0xfe000000),gr17 - or.p gr17,gr0,gr20 - or gr17,gr0,gr21 - or.p gr17,gr0,gr22 - or gr17,gr0,gr23 - - # consult the SDRAM controller CS address registers - cld @(gr14,gr0 ),gr20, cc0,#1 ; DBR0 / DARS0 - cld @(gr14,gr11),gr21, cc1,#1 ; DBR1 / DARS1 - cld @(gr14,gr12),gr22, cc2,#1 ; DBR2 / DARS2 - cld.p @(gr14,gr13),gr23, cc3,#1 ; DBR3 / DARS3 - - sll gr20,gr15,gr20 ; shift values up for FR551 - sll gr21,gr15,gr21 - sll gr22,gr15,gr22 - sll gr23,gr15,gr23 - - LEDS 0x0003 - - # assume the lowest valid CS line to be the SDRAM base and get its address - subcc gr20,gr17,gr0,icc0 - subcc.p gr21,gr17,gr0,icc1 - subcc gr22,gr17,gr0,icc2 - subcc.p gr23,gr17,gr0,icc3 - ckne icc0,cc4 ; T if DBR0 != 0xfe000000 - ckne icc1,cc5 - ckne icc2,cc6 - ckne icc3,cc7 - cor gr23,gr0,gr24, cc7,#1 ; GR24 = SDRAM base - cor gr22,gr0,gr24, cc6,#1 - cor gr21,gr0,gr24, cc5,#1 - cor gr20,gr0,gr24, cc4,#1 - - # calculate the displacement required to get the SDRAM into the right place in memory - sethi.p %hi(__sdram_base),gr16 - setlo %lo(__sdram_base),gr16 - sub gr16,gr24,gr16 ; delta = __sdram_base - DBRx - - # calculate the new values to go in the controller regs - cadd.p gr20,gr16,gr20, cc4,#1 ; DCS#0 (new) = DCS#0 (old) + delta - cadd gr21,gr16,gr21, cc5,#1 - cadd.p gr22,gr16,gr22, cc6,#1 - cadd gr23,gr16,gr23, cc7,#1 - - srl gr20,gr15,gr20 ; shift values down for FR551 - srl gr21,gr15,gr21 - srl gr22,gr15,gr22 - srl gr23,gr15,gr23 - - # work out the address at which the reg updater resides and lock it into icache - # also work out the address the updater will jump to when finished - sethi.p %hi(__head_move_sdram-__head_reference),gr18 - setlo %lo(__head_move_sdram-__head_reference),gr18 - sethi.p %hi(__head_sdram_moved-__head_reference),gr19 - setlo %lo(__head_sdram_moved-__head_reference),gr19 - add.p gr18,gr26,gr18 - add gr19,gr26,gr19 - add.p gr19,gr16,gr19 ; moved = addr + (__sdram_base - DBRx) - add gr18,gr5,gr4 ; two cachelines probably required - - icpl gr18,gr0,#1 ; load and lock the cachelines - icpl gr4,gr0,#1 - LEDS 0x0004 - membar - bar - jmpl @(gr18,gr0) - - .balign L1_CACHE_BYTES -__head_move_sdram: - cst gr20,@(gr14,gr0 ), cc4,#1 - cst gr21,@(gr14,gr11), cc5,#1 - cst gr22,@(gr14,gr12), cc6,#1 - cst gr23,@(gr14,gr13), cc7,#1 - cld @(gr14,gr0 ),gr20, cc4,#1 - cld @(gr14,gr11),gr21, cc5,#1 - cld @(gr14,gr12),gr22, cc4,#1 - cld @(gr14,gr13),gr23, cc7,#1 - bar - membar - jmpl @(gr19,gr0) - - .balign L1_CACHE_BYTES -__head_sdram_moved: - icul gr18 - add gr18,gr5,gr4 - icul gr4 - icei @(gr0,gr0),1 - dcei @(gr0,gr0),1 - - LEDS 0x0005 - - # recalculate reference address - call 0f -0: movsg lr,gr26 - addi gr26,#__head_reference-0b,gr26 - - -############################################################################### -# -# move the kernel image down to the bottom of the SDRAM -# -############################################################################### - sethi.p %hi(__kernel_image_size_no_bss+15),gr4 - setlo %lo(__kernel_image_size_no_bss+15),gr4 - srli.p gr4,#4,gr4 ; count - or gr26,gr26,gr16 ; source - - sethi.p %hi(__sdram_base),gr17 ; destination - setlo %lo(__sdram_base),gr17 - - setlos #8,gr5 - sub.p gr16,gr5,gr16 ; adjust src for LDDU - sub gr17,gr5,gr17 ; adjust dst for LDDU - - sethi.p %hi(__head_move_kernel-__head_reference),gr18 - setlo %lo(__head_move_kernel-__head_reference),gr18 - sethi.p %hi(__head_kernel_moved-__head_reference+__sdram_base),gr19 - setlo %lo(__head_kernel_moved-__head_reference+__sdram_base),gr19 - add gr18,gr26,gr18 - icpl gr18,gr0,#1 - jmpl @(gr18,gr0) - - .balign 32 -__head_move_kernel: - lddu @(gr16,gr5),gr10 - lddu @(gr16,gr5),gr12 - stdu.p gr10,@(gr17,gr5) - subicc gr4,#1,gr4,icc0 - stdu.p gr12,@(gr17,gr5) - bhi icc0,#0,__head_move_kernel - jmpl @(gr19,gr0) - - .balign 32 -__head_kernel_moved: - icul gr18 - icei @(gr0,gr0),1 - dcei @(gr0,gr0),1 - - LEDS 0x0006 - - # recalculate reference address - call 0f -0: movsg lr,gr26 - addi gr26,#__head_reference-0b,gr26 - - -############################################################################### -# -# rearrange the iomem map and set the protection registers -# -############################################################################### - -#ifdef CONFIG_MMU - LEDS 0x3301 - call __head_fr451_set_busctl - LEDS 0x3303 - call __head_fr451_survey_sdram - LEDS 0x3305 - call __head_fr451_set_protection - -#else - movsg psr,gr5 - srli gr5,#PSR_IMPLE_SHIFT,gr5 - subicc gr5,#PSR_IMPLE_FR551,gr0,icc0 - beq icc0,#0,__head_fr555_memmap - subicc gr5,#PSR_IMPLE_FR451,gr0,icc0 - beq icc0,#0,__head_fr451_memmap - - LEDS 0x3101 - call __head_fr401_set_busctl - LEDS 0x3103 - call __head_fr401_survey_sdram - LEDS 0x3105 - call __head_fr401_set_protection - bra __head_done_memmap - -__head_fr451_memmap: - LEDS 0x3301 - call __head_fr401_set_busctl - LEDS 0x3303 - call __head_fr401_survey_sdram - LEDS 0x3305 - call __head_fr451_set_protection - bra __head_done_memmap - -__head_fr555_memmap: - LEDS 0x3501 - call __head_fr555_set_busctl - LEDS 0x3503 - call __head_fr555_survey_sdram - LEDS 0x3505 - call __head_fr555_set_protection - -__head_done_memmap: -#endif - LEDS 0x0007 - -############################################################################### -# -# turn the data cache and MMU on -# - for the FR451 this'll mean that the window through which the kernel is -# viewed will change -# -############################################################################### - -#ifdef CONFIG_MMU -#define MMUMODE HSR0_EIMMU|HSR0_EDMMU|HSR0_EXMMU|HSR0_EDAT|HSR0_XEDAT -#else -#define MMUMODE HSR0_EIMMU|HSR0_EDMMU -#endif - - movsg hsr0,gr5 - - sethi.p %hi(MMUMODE),gr4 - setlo %lo(MMUMODE),gr4 - or gr4,gr5,gr5 - -#if defined(CONFIG_FRV_DEFL_CACHE_WTHRU) - sethi.p %hi(HSR0_DCE|HSR0_CBM_WRITE_THRU),gr4 - setlo %lo(HSR0_DCE|HSR0_CBM_WRITE_THRU),gr4 -#elif defined(CONFIG_FRV_DEFL_CACHE_WBACK) - sethi.p %hi(HSR0_DCE|HSR0_CBM_COPY_BACK),gr4 - setlo %lo(HSR0_DCE|HSR0_CBM_COPY_BACK),gr4 -#elif defined(CONFIG_FRV_DEFL_CACHE_WBEHIND) - sethi.p %hi(HSR0_DCE|HSR0_CBM_COPY_BACK),gr4 - setlo %lo(HSR0_DCE|HSR0_CBM_COPY_BACK),gr4 - - movsg psr,gr6 - srli gr6,#24,gr6 - cmpi gr6,#0x50,icc0 // FR451 - beq icc0,#0,0f - cmpi gr6,#0x40,icc0 // FR405 - bne icc0,#0,1f -0: - # turn off write-allocate - sethi.p %hi(HSR0_NWA),gr6 - setlo %lo(HSR0_NWA),gr6 - or gr4,gr6,gr4 -1: - -#else -#error No default cache configuration set -#endif - - or gr4,gr5,gr5 - movgs gr5,hsr0 - bar - - LEDS 0x0008 - - sethi.p %hi(__head_mmu_enabled),gr19 - setlo %lo(__head_mmu_enabled),gr19 - jmpl @(gr19,gr0) - -__head_mmu_enabled: - icei @(gr0,gr0),#1 - dcei @(gr0,gr0),#1 - - LEDS 0x0009 - -#ifdef CONFIG_MMU - call __head_fr451_finalise_protection -#endif - - LEDS 0x000a - -############################################################################### -# -# set up the runtime environment -# -############################################################################### - - # clear the BSS area - sethi.p %hi(__bss_start),gr4 - setlo %lo(__bss_start),gr4 - sethi.p %hi(_end),gr5 - setlo %lo(_end),gr5 - or.p gr0,gr0,gr18 - or gr0,gr0,gr19 - -0: - stdi gr18,@(gr4,#0) - stdi gr18,@(gr4,#8) - stdi gr18,@(gr4,#16) - stdi.p gr18,@(gr4,#24) - addi gr4,#24,gr4 - subcc gr5,gr4,gr0,icc0 - bhi icc0,#2,0b - - LEDS 0x000b - - # save the SDRAM details - sethi.p %hi(__sdram_old_base),gr4 - setlo %lo(__sdram_old_base),gr4 - st gr24,@(gr4,gr0) - - sethi.p %hi(__sdram_base),gr5 - setlo %lo(__sdram_base),gr5 - sethi.p %hi(memory_start),gr4 - setlo %lo(memory_start),gr4 - st gr5,@(gr4,gr0) - - add gr25,gr5,gr25 - sethi.p %hi(memory_end),gr4 - setlo %lo(memory_end),gr4 - st gr25,@(gr4,gr0) - - # point the TBR at the kernel trap table - sethi.p %hi(__entry_kerneltrap_table),gr4 - setlo %lo(__entry_kerneltrap_table),gr4 - movgs gr4,tbr - - # set up the exception frame for init - sethi.p %hi(__kernel_frame0_ptr),gr28 - setlo %lo(__kernel_frame0_ptr),gr28 - sethi.p %hi(_gp),gr16 - setlo %lo(_gp),gr16 - sethi.p %hi(__entry_usertrap_table),gr4 - setlo %lo(__entry_usertrap_table),gr4 - - lddi @(gr28,#0),gr28 ; load __frame & current - ldi.p @(gr29,#4),gr15 ; set current_thread - - or gr0,gr0,fp - or gr28,gr0,sp - - sti.p gr4,@(gr28,REG_TBR) - setlos #ISR_EDE|ISR_DTT_DIVBYZERO|ISR_EMAM_EXCEPTION,gr5 - movgs gr5,isr - - # turn on and off various CPU services - movsg psr,gr22 - sethi.p %hi(#PSR_EM|PSR_EF|PSR_CM|PSR_NEM),gr4 - setlo %lo(#PSR_EM|PSR_EF|PSR_CM|PSR_NEM),gr4 - or gr22,gr4,gr22 - movgs gr22,psr - - andi gr22,#~(PSR_PIL|PSR_PS|PSR_S),gr22 - ori gr22,#PSR_ET,gr22 - sti gr22,@(gr28,REG_PSR) - - -############################################################################### -# -# set up the registers and jump into the kernel -# -############################################################################### - - LEDS 0x000c - - sethi.p #0xe5e5,gr3 - setlo #0xe5e5,gr3 - or.p gr3,gr0,gr4 - or gr3,gr0,gr5 - or.p gr3,gr0,gr6 - or gr3,gr0,gr7 - or.p gr3,gr0,gr8 - or gr3,gr0,gr9 - or.p gr3,gr0,gr10 - or gr3,gr0,gr11 - or.p gr3,gr0,gr12 - or gr3,gr0,gr13 - or.p gr3,gr0,gr14 - or gr3,gr0,gr17 - or.p gr3,gr0,gr18 - or gr3,gr0,gr19 - or.p gr3,gr0,gr20 - or gr3,gr0,gr21 - or.p gr3,gr0,gr23 - or gr3,gr0,gr24 - or.p gr3,gr0,gr25 - or gr3,gr0,gr26 - or.p gr3,gr0,gr27 -# or gr3,gr0,gr30 - or gr3,gr0,gr31 - movgs gr0,lr - movgs gr0,lcr - movgs gr0,ccr - movgs gr0,cccr - - # initialise the virtual interrupt handling - subcc gr0,gr0,gr0,icc2 /* set Z, clear C */ - -#ifdef CONFIG_MMU - movgs gr3,scr2 - movgs gr3,scr3 -#endif - - LEDS 0x0fff - - # invoke the debugging stub if present - # - arch/frv/kernel/debug-stub.c will shift control directly to init/main.c - # (it will not return here) - break - .globl __debug_stub_init_break -__debug_stub_init_break: - - # however, if you need to use an ICE, and don't care about using any userspace - # debugging tools (such as the ptrace syscall), you can just step over the break - # above and get to the kernel this way - # look at arch/frv/kernel/debug-stub.c: debug_stub_init() to see what you've missed - call start_kernel - - .globl __head_end -__head_end: - .size _boot, .-_boot - - # provide a point for GDB to place a break - .section .text..start,"ax" - .globl _start - .balign 4 -_start: - call _boot - - .previous -############################################################################### -# -# split a tile off of the region defined by GR8-GR9 -# -# ENTRY: EXIT: -# GR4 - IAMPR value representing tile -# GR5 - DAMPR value representing tile -# GR6 - IAMLR value representing tile -# GR7 - DAMLR value representing tile -# GR8 region base pointer [saved] -# GR9 region top pointer updated to exclude new tile -# GR11 xAMLR mask [saved] -# GR25 SDRAM size [saved] -# GR30 LED address [saved] -# -# - GR8 and GR9 should be rounded up/down to the nearest megabyte before calling -# -############################################################################### - .globl __head_split_region - .type __head_split_region,@function -__head_split_region: - subcc.p gr9,gr8,gr4,icc0 - setlos #31,gr5 - scan.p gr4,gr0,gr6 - beq icc0,#0,__head_region_empty - sub.p gr5,gr6,gr6 ; bit number of highest set bit (1MB=>20) - setlos #1,gr4 - sll.p gr4,gr6,gr4 ; size of region (1 << bitno) - subi gr6,#17,gr6 ; 1MB => 0x03 - slli.p gr6,#4,gr6 ; 1MB => 0x30 - sub gr9,gr4,gr9 ; move uncovered top down - - or gr9,gr6,gr4 - ori gr4,#xAMPRx_S_USER|xAMPRx_C_CACHED|xAMPRx_V,gr4 - or.p gr4,gr0,gr5 - - and gr4,gr11,gr6 - and.p gr5,gr11,gr7 - bralr - -__head_region_empty: - or.p gr0,gr0,gr4 - or gr0,gr0,gr5 - or.p gr0,gr0,gr6 - or gr0,gr0,gr7 - bralr - .size __head_split_region, .-__head_split_region - -############################################################################### -# -# write the 32-bit hex number in GR8 to ttyS0 -# -############################################################################### -#if 0 - .globl __head_write_to_ttyS0 - .type __head_write_to_ttyS0,@function -__head_write_to_ttyS0: - sethi.p %hi(0xfeff9c00),gr31 - setlo %lo(0xfeff9c00),gr31 - setlos #8,gr20 - -0: ldubi @(gr31,#5*8),gr21 - andi gr21,#0x60,gr21 - subicc gr21,#0x60,gr21,icc0 - bne icc0,#0,0b - -1: srli gr8,#28,gr21 - slli gr8,#4,gr8 - - addi gr21,#'0',gr21 - subicc gr21,#'9',gr0,icc0 - bls icc0,#2,2f - addi gr21,#'A'-'0'-10,gr21 -2: - stbi gr21,@(gr31,#0*8) - subicc gr20,#1,gr20,icc0 - bhi icc0,#2,1b - - setlos #'\r',gr21 - stbi gr21,@(gr31,#0*8) - - setlos #'\n',gr21 - stbi gr21,@(gr31,#0*8) - -3: ldubi @(gr31,#5*8),gr21 - andi gr21,#0x60,gr21 - subicc gr21,#0x60,gr21,icc0 - bne icc0,#0,3b - bralr - - .size __head_write_to_ttyS0, .-__head_write_to_ttyS0 -#endif diff --git a/arch/frv/kernel/head.inc b/arch/frv/kernel/head.inc deleted file mode 100644 index bff66628b99a..000000000000 --- a/arch/frv/kernel/head.inc +++ /dev/null @@ -1,50 +0,0 @@ -/* head.inc: head common definitions -*- asm -*- - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - -#if defined(CONFIG_MB93090_MB00) -#define LED_ADDR (0x21200000+4) - -.macro LEDS val - sethi.p %hi(0xFFC00030),gr3 - setlo %lo(0xFFC00030),gr3 - lduh @(gr3,gr0),gr3 - andicc gr3,#0x100,gr0,icc0 - bne icc0,0,999f - - setlos #~\val,gr3 - st gr3,@(gr30,gr0) - membar - dcf @(gr30,gr0) - 999: -.endm - -#elif defined(CONFIG_MB93093_PDK) -#define LED_ADDR (0x20000023) - -.macro LEDS val - setlos #\val,gr3 - stb gr3,@(gr30,gr0) - membar -.endm - -#else -#define LED_ADDR 0 - -.macro LEDS val -.endm -#endif - -#ifdef CONFIG_MMU -__sdram_base = 0x00000000 /* base address to which SDRAM relocated */ -#else -__sdram_base = __page_offset /* base address to which SDRAM relocated */ -#endif diff --git a/arch/frv/kernel/irq-mb93091.c b/arch/frv/kernel/irq-mb93091.c deleted file mode 100644 index 091b2839be90..000000000000 --- a/arch/frv/kernel/irq-mb93091.c +++ /dev/null @@ -1,157 +0,0 @@ -/* irq-mb93091.c: MB93091 FPGA interrupt handling - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/delay.h> -#include <asm/irq.h> -#include <asm/irc-regs.h> - -#define __reg16(ADDR) (*(volatile unsigned short *)(ADDR)) - -#define __get_IMR() ({ __reg16(0xffc00004); }) -#define __set_IMR(M) do { __reg16(0xffc00004) = (M); wmb(); } while(0) -#define __get_IFR() ({ __reg16(0xffc0000c); }) -#define __clr_IFR(M) do { __reg16(0xffc0000c) = ~(M); wmb(); } while(0) - - -/* - * on-motherboard FPGA PIC operations - */ -static void frv_fpga_mask(struct irq_data *d) -{ - uint16_t imr = __get_IMR(); - - imr |= 1 << (d->irq - IRQ_BASE_FPGA); - - __set_IMR(imr); -} - -static void frv_fpga_ack(struct irq_data *d) -{ - __clr_IFR(1 << (d->irq - IRQ_BASE_FPGA)); -} - -static void frv_fpga_mask_ack(struct irq_data *d) -{ - uint16_t imr = __get_IMR(); - - imr |= 1 << (d->irq - IRQ_BASE_FPGA); - __set_IMR(imr); - - __clr_IFR(1 << (d->irq - IRQ_BASE_FPGA)); -} - -static void frv_fpga_unmask(struct irq_data *d) -{ - uint16_t imr = __get_IMR(); - - imr &= ~(1 << (d->irq - IRQ_BASE_FPGA)); - - __set_IMR(imr); -} - -static struct irq_chip frv_fpga_pic = { - .name = "mb93091", - .irq_ack = frv_fpga_ack, - .irq_mask = frv_fpga_mask, - .irq_mask_ack = frv_fpga_mask_ack, - .irq_unmask = frv_fpga_unmask, -}; - -/* - * FPGA PIC interrupt handler - */ -static irqreturn_t fpga_interrupt(int irq, void *_mask) -{ - uint16_t imr, mask = (unsigned long) _mask; - - imr = __get_IMR(); - mask = mask & ~imr & __get_IFR(); - - /* poll all the triggered IRQs */ - while (mask) { - int irq; - - asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask)); - irq = 31 - irq; - mask &= ~(1 << irq); - - generic_handle_irq(IRQ_BASE_FPGA + irq); - } - - return IRQ_HANDLED; -} - -/* - * define an interrupt action for each FPGA PIC output - * - use dev_id to indicate the FPGA PIC input to output mappings - */ -static struct irqaction fpga_irq[4] = { - [0] = { - .handler = fpga_interrupt, - .flags = IRQF_SHARED, - .name = "fpga.0", - .dev_id = (void *) 0x0028UL, - }, - [1] = { - .handler = fpga_interrupt, - .flags = IRQF_SHARED, - .name = "fpga.1", - .dev_id = (void *) 0x0050UL, - }, - [2] = { - .handler = fpga_interrupt, - .flags = IRQF_SHARED, - .name = "fpga.2", - .dev_id = (void *) 0x1c00UL, - }, - [3] = { - .handler = fpga_interrupt, - .flags = IRQF_SHARED, - .name = "fpga.3", - .dev_id = (void *) 0x6386UL, - } -}; - -/* - * initialise the motherboard FPGA's PIC - */ -void __init fpga_init(void) -{ - int irq; - - /* all PIC inputs are all set to be low-level driven, apart from the - * NMI button (15) which is fixed at falling-edge - */ - __set_IMR(0x7ffe); - __clr_IFR(0x0000); - - for (irq = IRQ_BASE_FPGA + 1; irq <= IRQ_BASE_FPGA + 14; irq++) - irq_set_chip_and_handler(irq, &frv_fpga_pic, handle_level_irq); - - irq_set_chip_and_handler(IRQ_FPGA_NMI, &frv_fpga_pic, handle_edge_irq); - - /* the FPGA drives the first four external IRQ inputs on the CPU PIC */ - setup_irq(IRQ_CPU_EXTERNAL0, &fpga_irq[0]); - setup_irq(IRQ_CPU_EXTERNAL1, &fpga_irq[1]); - setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[2]); - setup_irq(IRQ_CPU_EXTERNAL3, &fpga_irq[3]); -} diff --git a/arch/frv/kernel/irq-mb93093.c b/arch/frv/kernel/irq-mb93093.c deleted file mode 100644 index 1f3015cf80f5..000000000000 --- a/arch/frv/kernel/irq-mb93093.c +++ /dev/null @@ -1,129 +0,0 @@ -/* irq-mb93093.c: MB93093 FPGA interrupt handling - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/delay.h> -#include <asm/irq.h> -#include <asm/irc-regs.h> - -#define __reg16(ADDR) (*(volatile unsigned short *)(__region_CS2 + (ADDR))) - -#define __get_IMR() ({ __reg16(0x0a); }) -#define __set_IMR(M) do { __reg16(0x0a) = (M); wmb(); } while(0) -#define __get_IFR() ({ __reg16(0x02); }) -#define __clr_IFR(M) do { __reg16(0x02) = ~(M); wmb(); } while(0) - -/* - * off-CPU FPGA PIC operations - */ -static void frv_fpga_mask(struct irq_data *d) -{ - uint16_t imr = __get_IMR(); - - imr |= 1 << (d->irq - IRQ_BASE_FPGA); - __set_IMR(imr); -} - -static void frv_fpga_ack(struct irq_data *d) -{ - __clr_IFR(1 << (d->irq - IRQ_BASE_FPGA)); -} - -static void frv_fpga_mask_ack(struct irq_data *d) -{ - uint16_t imr = __get_IMR(); - - imr |= 1 << (d->irq - IRQ_BASE_FPGA); - __set_IMR(imr); - - __clr_IFR(1 << (d->irq - IRQ_BASE_FPGA)); -} - -static void frv_fpga_unmask(struct irq_data *d) -{ - uint16_t imr = __get_IMR(); - - imr &= ~(1 << (d->irq - IRQ_BASE_FPGA)); - - __set_IMR(imr); -} - -static struct irq_chip frv_fpga_pic = { - .name = "mb93093", - .irq_ack = frv_fpga_ack, - .irq_mask = frv_fpga_mask, - .irq_mask_ack = frv_fpga_mask_ack, - .irq_unmask = frv_fpga_unmask, -}; - -/* - * FPGA PIC interrupt handler - */ -static irqreturn_t fpga_interrupt(int irq, void *_mask) -{ - uint16_t imr, mask = (unsigned long) _mask; - - imr = __get_IMR(); - mask = mask & ~imr & __get_IFR(); - - /* poll all the triggered IRQs */ - while (mask) { - int irq; - - asm("scan %1,gr0,%0" : "=r"(irq) : "r"(mask)); - irq = 31 - irq; - mask &= ~(1 << irq); - - generic_handle_irq(IRQ_BASE_FPGA + irq); - } - - return IRQ_HANDLED; -} - -/* - * define an interrupt action for each FPGA PIC output - * - use dev_id to indicate the FPGA PIC input to output mappings - */ -static struct irqaction fpga_irq[1] = { - [0] = { - .handler = fpga_interrupt, - .name = "fpga.0", - .dev_id = (void *) 0x0700UL, - } -}; - -/* - * initialise the motherboard FPGA's PIC - */ -void __init fpga_init(void) -{ - int irq; - - /* all PIC inputs are all set to be edge triggered */ - __set_IMR(0x0700); - __clr_IFR(0x0000); - - for (irq = IRQ_BASE_FPGA + 8; irq <= IRQ_BASE_FPGA + 10; irq++) - irq_set_chip_and_handler(irq, &frv_fpga_pic, handle_edge_irq); - - /* the FPGA drives external IRQ input #2 on the CPU PIC */ - setup_irq(IRQ_CPU_EXTERNAL2, &fpga_irq[0]); -} diff --git a/arch/frv/kernel/irq-mb93493.c b/arch/frv/kernel/irq-mb93493.c deleted file mode 100644 index 8ca5aa4ff595..000000000000 --- a/arch/frv/kernel/irq-mb93493.c +++ /dev/null @@ -1,147 +0,0 @@ -/* irq-mb93493.c: MB93493 companion chip interrupt handler - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/delay.h> -#include <asm/irq.h> -#include <asm/irc-regs.h> -#include <asm/mb93493-irqs.h> -#include <asm/mb93493-regs.h> - -#define IRQ_ROUTE_ONE(X) (X##_ROUTE << (X - IRQ_BASE_MB93493)) - -#define IRQ_ROUTING \ - (IRQ_ROUTE_ONE(IRQ_MB93493_VDC) | \ - IRQ_ROUTE_ONE(IRQ_MB93493_VCC) | \ - IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_OUT) | \ - IRQ_ROUTE_ONE(IRQ_MB93493_I2C_0) | \ - IRQ_ROUTE_ONE(IRQ_MB93493_I2C_1) | \ - IRQ_ROUTE_ONE(IRQ_MB93493_USB) | \ - IRQ_ROUTE_ONE(IRQ_MB93493_LOCAL_BUS) | \ - IRQ_ROUTE_ONE(IRQ_MB93493_PCMCIA) | \ - IRQ_ROUTE_ONE(IRQ_MB93493_GPIO) | \ - IRQ_ROUTE_ONE(IRQ_MB93493_AUDIO_IN)) - -/* - * daughter board PIC operations - * - there is no way to ACK interrupts in the MB93493 chip - */ -static void frv_mb93493_mask(struct irq_data *d) -{ - uint32_t iqsr; - volatile void *piqsr; - - if (IRQ_ROUTING & (1 << (d->irq - IRQ_BASE_MB93493))) - piqsr = __addr_MB93493_IQSR(1); - else - piqsr = __addr_MB93493_IQSR(0); - - iqsr = readl(piqsr); - iqsr &= ~(1 << (d->irq - IRQ_BASE_MB93493 + 16)); - writel(iqsr, piqsr); -} - -static void frv_mb93493_ack(struct irq_data *d) -{ -} - -static void frv_mb93493_unmask(struct irq_data *d) -{ - uint32_t iqsr; - volatile void *piqsr; - - if (IRQ_ROUTING & (1 << (d->irq - IRQ_BASE_MB93493))) - piqsr = __addr_MB93493_IQSR(1); - else - piqsr = __addr_MB93493_IQSR(0); - - iqsr = readl(piqsr); - iqsr |= 1 << (d->irq - IRQ_BASE_MB93493 + 16); - writel(iqsr, piqsr); -} - -static struct irq_chip frv_mb93493_pic = { - .name = "mb93093", - .irq_ack = frv_mb93493_ack, - .irq_mask = frv_mb93493_mask, - .irq_mask_ack = frv_mb93493_mask, - .irq_unmask = frv_mb93493_unmask, -}; - -/* - * MB93493 PIC interrupt handler - */ -static irqreturn_t mb93493_interrupt(int irq, void *_piqsr) -{ - volatile void *piqsr = _piqsr; - uint32_t iqsr; - - iqsr = readl(piqsr); - iqsr = iqsr & (iqsr >> 16) & 0xffff; - - /* poll all the triggered IRQs */ - while (iqsr) { - int irq; - - asm("scan %1,gr0,%0" : "=r"(irq) : "r"(iqsr)); - irq = 31 - irq; - iqsr &= ~(1 << irq); - - generic_handle_irq(IRQ_BASE_MB93493 + irq); - } - - return IRQ_HANDLED; -} - -/* - * define an interrupt action for each MB93493 PIC output - * - use dev_id to indicate the MB93493 PIC input to output mappings - */ -static struct irqaction mb93493_irq[2] = { - [0] = { - .handler = mb93493_interrupt, - .flags = IRQF_SHARED, - .name = "mb93493.0", - .dev_id = (void *) __addr_MB93493_IQSR(0), - }, - [1] = { - .handler = mb93493_interrupt, - .flags = IRQF_SHARED, - .name = "mb93493.1", - .dev_id = (void *) __addr_MB93493_IQSR(1), - } -}; - -/* - * initialise the motherboard MB93493's PIC - */ -void __init mb93493_init(void) -{ - int irq; - - for (irq = IRQ_BASE_MB93493 + 0; irq <= IRQ_BASE_MB93493 + 10; irq++) - irq_set_chip_and_handler(irq, &frv_mb93493_pic, - handle_edge_irq); - - /* the MB93493 drives external IRQ inputs on the CPU PIC */ - setup_irq(IRQ_CPU_MB93493_0, &mb93493_irq[0]); - setup_irq(IRQ_CPU_MB93493_1, &mb93493_irq[1]); -} diff --git a/arch/frv/kernel/irq.c b/arch/frv/kernel/irq.c deleted file mode 100644 index 93513e4ccd2b..000000000000 --- a/arch/frv/kernel/irq.c +++ /dev/null @@ -1,159 +0,0 @@ -/* irq.c: FRV IRQ handling - * - * Copyright (C) 2003, 2004, 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/ptrace.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/random.h> -#include <linux/init.h> -#include <linux/kernel_stat.h> -#include <linux/irq.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/module.h> -#include <linux/bitops.h> - -#include <linux/atomic.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <linux/uaccess.h> -#include <asm/pgalloc.h> -#include <asm/delay.h> -#include <asm/irq.h> -#include <asm/irc-regs.h> -#include <asm/gdb-stub.h> - -#define set_IRR(N,A,B,C,D) __set_IRR(N, (A << 28) | (B << 24) | (C << 20) | (D << 16)) - -extern void __init fpga_init(void); -#ifdef CONFIG_FUJITSU_MB93493 -extern void __init mb93493_init(void); -#endif - -#define __reg16(ADDR) (*(volatile unsigned short *)(ADDR)) - -atomic_t irq_err_count; - -int arch_show_interrupts(struct seq_file *p, int prec) -{ - seq_printf(p, "%*s: ", prec, "ERR"); - seq_printf(p, "%10u\n", atomic_read(&irq_err_count)); - return 0; -} - -/* - * on-CPU PIC operations - */ -static void frv_cpupic_ack(struct irq_data *d) -{ - __clr_RC(d->irq); - __clr_IRL(); -} - -static void frv_cpupic_mask(struct irq_data *d) -{ - __set_MASK(d->irq); -} - -static void frv_cpupic_mask_ack(struct irq_data *d) -{ - __set_MASK(d->irq); - __clr_RC(d->irq); - __clr_IRL(); -} - -static void frv_cpupic_unmask(struct irq_data *d) -{ - __clr_MASK(d->irq); -} - -static struct irq_chip frv_cpu_pic = { - .name = "cpu", - .irq_ack = frv_cpupic_ack, - .irq_mask = frv_cpupic_mask, - .irq_mask_ack = frv_cpupic_mask_ack, - .irq_unmask = frv_cpupic_unmask, -}; - -/* - * handles all normal device IRQs - * - registers are referred to by the __frame variable (GR28) - * - IRQ distribution is complicated in this arch because of the many PICs, the - * way they work and the way they cascade - */ -asmlinkage void do_IRQ(void) -{ - irq_enter(); - generic_handle_irq(__get_IRL()); - irq_exit(); -} - -/* - * handles all NMIs when not co-opted by the debugger - * - registers are referred to by the __frame variable (GR28) - */ -asmlinkage void do_NMI(void) -{ -} - -/* - * initialise the interrupt system - */ -void __init init_IRQ(void) -{ - int level; - - for (level = 1; level <= 14; level++) - irq_set_chip_and_handler(level, &frv_cpu_pic, - handle_level_irq); - - irq_set_handler(IRQ_CPU_TIMER0, handle_edge_irq); - - /* set the trigger levels for internal interrupt sources - * - timers all falling-edge - * - ERR0 is rising-edge - * - all others are high-level - */ - __set_IITMR(0, 0x003f0000); /* DMA0-3, TIMER0-2 */ - __set_IITMR(1, 0x20000000); /* ERR0-1, UART0-1, DMA4-7 */ - - /* route internal interrupts */ - set_IRR(4, IRQ_DMA3_LEVEL, IRQ_DMA2_LEVEL, IRQ_DMA1_LEVEL, - IRQ_DMA0_LEVEL); - set_IRR(5, 0, IRQ_TIMER2_LEVEL, IRQ_TIMER1_LEVEL, IRQ_TIMER0_LEVEL); - set_IRR(6, IRQ_GDBSTUB_LEVEL, IRQ_GDBSTUB_LEVEL, - IRQ_UART1_LEVEL, IRQ_UART0_LEVEL); - set_IRR(7, IRQ_DMA7_LEVEL, IRQ_DMA6_LEVEL, IRQ_DMA5_LEVEL, - IRQ_DMA4_LEVEL); - - /* route external interrupts */ - set_IRR(2, IRQ_XIRQ7_LEVEL, IRQ_XIRQ6_LEVEL, IRQ_XIRQ5_LEVEL, - IRQ_XIRQ4_LEVEL); - set_IRR(3, IRQ_XIRQ3_LEVEL, IRQ_XIRQ2_LEVEL, IRQ_XIRQ1_LEVEL, - IRQ_XIRQ0_LEVEL); - -#if defined(CONFIG_MB93091_VDK) - __set_TM1(0x55550000); /* XIRQ7-0 all active low */ -#elif defined(CONFIG_MB93093_PDK) - __set_TM1(0x15550000); /* XIRQ7 active high, 6-0 all active low */ -#else -#error dont know external IRQ trigger levels for this setup -#endif - - fpga_init(); -#ifdef CONFIG_FUJITSU_MB93493 - mb93493_init(); -#endif -} diff --git a/arch/frv/kernel/local.h b/arch/frv/kernel/local.h deleted file mode 100644 index 76606d13b1aa..000000000000 --- a/arch/frv/kernel/local.h +++ /dev/null @@ -1,59 +0,0 @@ -/* local.h: local definitions - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _FRV_LOCAL_H -#define _FRV_LOCAL_H - -#include <asm/sections.h> - -#ifndef __ASSEMBLY__ - -/* dma.c */ -extern unsigned long frv_dma_inprogress; - -extern void frv_dma_pause_all(void); -extern void frv_dma_resume_all(void); - -/* sleep.S */ -extern asmlinkage void frv_cpu_suspend(unsigned long); -extern asmlinkage void frv_cpu_core_sleep(void); - -/* setup.c */ -extern unsigned long __nongprelbss pdm_suspend_mode; -extern void determine_clocks(int verbose); -extern int __nongprelbss clock_p0_current; -extern int __nongprelbss clock_cm_current; -extern int __nongprelbss clock_cmode_current; - -#ifdef CONFIG_PM -extern int __nongprelbss clock_cmodes_permitted; -extern unsigned long __nongprelbss clock_bits_settable; -#define CLOCK_BIT_CM 0x0000000f -#define CLOCK_BIT_CM_H 0x00000001 /* CLKC.CM can be set to 0 */ -#define CLOCK_BIT_CM_M 0x00000002 /* CLKC.CM can be set to 1 */ -#define CLOCK_BIT_CM_L 0x00000004 /* CLKC.CM can be set to 2 */ -#define CLOCK_BIT_P0 0x00000010 /* CLKC.P0 can be changed */ -#define CLOCK_BIT_CMODE 0x00000020 /* CLKC.CMODE can be changed */ - -extern void (*__power_switch_wake_setup)(void); -extern int (*__power_switch_wake_check)(void); -extern void (*__power_switch_wake_cleanup)(void); -#endif - -/* time.c */ -extern void time_divisor_init(void); - -/* cmode.S */ -extern asmlinkage void frv_change_cmode(int); - - -#endif /* __ASSEMBLY__ */ -#endif /* _FRV_LOCAL_H */ diff --git a/arch/frv/kernel/local64.h b/arch/frv/kernel/local64.h deleted file mode 100644 index 36c93b5cc239..000000000000 --- a/arch/frv/kernel/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local64.h> diff --git a/arch/frv/kernel/module.c b/arch/frv/kernel/module.c deleted file mode 100644 index 9d9835f1fe2b..000000000000 --- a/arch/frv/kernel/module.c +++ /dev/null @@ -1,27 +0,0 @@ -/* module.c: FRV specific module loading bits - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/i386/kernel/module.c, Copyright (C) 2001 Rusty Russell. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/moduleloader.h> -#include <linux/elf.h> -#include <linux/vmalloc.h> -#include <linux/fs.h> -#include <linux/string.h> -#include <linux/kernel.h> - -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt...) -#endif - -/* TODO: At least one of apply_relocate or apply_relocate_add must be - * implemented in order to get working module support. - */ diff --git a/arch/frv/kernel/pm-mb93093.c b/arch/frv/kernel/pm-mb93093.c deleted file mode 100644 index 8358e34a3fad..000000000000 --- a/arch/frv/kernel/pm-mb93093.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * FR-V MB93093 Power Management Routines - * - * Copyright (c) 2004 Red Hat, Inc. - * - * Written by: msalter@redhat.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License. - * - */ - -#include <linux/init.h> -#include <linux/pm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/sysctl.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/uaccess.h> - -#include <asm/mb86943a.h> - -#include "local.h" - -static unsigned long imask; -/* - * Setup interrupt masks, etc to enable wakeup by power switch - */ -static void mb93093_power_switch_setup(void) -{ - /* mask all but FPGA interrupt sources. */ - imask = *(volatile unsigned long *)0xfeff9820; - *(volatile unsigned long *)0xfeff9820 = ~(1 << (IRQ_XIRQ2_LEVEL + 16)) & 0xfffe0000; -} - -/* - * Cleanup interrupt masks, etc after wakeup by power switch - */ -static void mb93093_power_switch_cleanup(void) -{ - *(volatile unsigned long *)0xfeff9820 = imask; -} - -/* - * Return non-zero if wakeup irq was caused by power switch - */ -static int mb93093_power_switch_check(void) -{ - return 1; -} - -/* - * Initialize power interface - */ -static int __init mb93093_pm_init(void) -{ - __power_switch_wake_setup = mb93093_power_switch_setup; - __power_switch_wake_check = mb93093_power_switch_check; - __power_switch_wake_cleanup = mb93093_power_switch_cleanup; - return 0; -} - -__initcall(mb93093_pm_init); - diff --git a/arch/frv/kernel/pm.c b/arch/frv/kernel/pm.c deleted file mode 100644 index 051ccecbf7f1..000000000000 --- a/arch/frv/kernel/pm.c +++ /dev/null @@ -1,352 +0,0 @@ -/* - * FR-V Power Management Routines - * - * Copyright (c) 2004 Red Hat, Inc. - * - * Based on SA1100 version: - * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/pm.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/sysctl.h> -#include <linux/errno.h> -#include <linux/delay.h> -#include <linux/uaccess.h> - -#include <asm/mb86943a.h> - -#include "local.h" - -/* - * Debug macros - */ -#define DEBUG - -int pm_do_suspend(void) -{ - local_irq_disable(); - - __set_LEDS(0xb1); - - /* go zzz */ - frv_cpu_suspend(pdm_suspend_mode); - - __set_LEDS(0xb2); - - local_irq_enable(); - - return 0; -} - -static unsigned long __irq_mask; - -/* - * Setup interrupt masks, etc to enable wakeup by power switch - */ -static void __default_power_switch_setup(void) -{ - /* default is to mask all interrupt sources. */ - __irq_mask = *(unsigned long *)0xfeff9820; - *(unsigned long *)0xfeff9820 = 0xfffe0000; -} - -/* - * Cleanup interrupt masks, etc after wakeup by power switch - */ -static void __default_power_switch_cleanup(void) -{ - *(unsigned long *)0xfeff9820 = __irq_mask; -} - -/* - * Return non-zero if wakeup irq was caused by power switch - */ -static int __default_power_switch_check(void) -{ - return 1; -} - -void (*__power_switch_wake_setup)(void) = __default_power_switch_setup; -int (*__power_switch_wake_check)(void) = __default_power_switch_check; -void (*__power_switch_wake_cleanup)(void) = __default_power_switch_cleanup; - -int pm_do_bus_sleep(void) -{ - local_irq_disable(); - - /* - * Here is where we need some platform-dependent setup - * of the interrupt state so that appropriate wakeup - * sources are allowed and all others are masked. - */ - __power_switch_wake_setup(); - - __set_LEDS(0xa1); - - /* go zzz - * - * This is in a loop in case power switch shares an irq with other - * devices. The wake_check() tells us if we need to finish waking - * or go back to sleep. - */ - do { - frv_cpu_suspend(HSR0_PDM_BUS_SLEEP); - } while (__power_switch_wake_check && !__power_switch_wake_check()); - - __set_LEDS(0xa2); - - /* - * Here is where we need some platform-dependent restore - * of the interrupt state prior to being called. - */ - __power_switch_wake_cleanup(); - - local_irq_enable(); - - return 0; -} - -unsigned long sleep_phys_sp(void *sp) -{ - return virt_to_phys(sp); -} - -#ifdef CONFIG_SYSCTL -/* - * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6 - * when all the PM interfaces exist nicely. - */ -#define CTL_PM_SUSPEND 1 -#define CTL_PM_CMODE 2 -#define CTL_PM_P0 4 -#define CTL_PM_CM 5 - -static int user_atoi(char __user *ubuf, size_t len) -{ - char buf[16]; - unsigned long ret; - - if (len > 15) - return -EINVAL; - - if (copy_from_user(buf, ubuf, len)) - return -EFAULT; - - buf[len] = 0; - ret = simple_strtoul(buf, NULL, 0); - if (ret > INT_MAX) - return -ERANGE; - return ret; -} - -/* - * Send us to sleep. - */ -static int sysctl_pm_do_suspend(struct ctl_table *ctl, int write, - void __user *buffer, size_t *lenp, loff_t *fpos) -{ - int mode; - - if (*lenp <= 0) - return -EIO; - - mode = user_atoi(buffer, *lenp); - switch (mode) { - case 1: - return pm_do_suspend(); - - case 5: - return pm_do_bus_sleep(); - - default: - return -EINVAL; - } -} - -static int try_set_cmode(int new_cmode) -{ - if (new_cmode > 15) - return -EINVAL; - if (!(clock_cmodes_permitted & (1<<new_cmode))) - return -EINVAL; - - /* now change cmode */ - local_irq_disable(); - frv_dma_pause_all(); - - frv_change_cmode(new_cmode); - - determine_clocks(0); - time_divisor_init(); - -#ifdef DEBUG - determine_clocks(1); -#endif - frv_dma_resume_all(); - local_irq_enable(); - - return 0; -} - - -static int cmode_procctl(struct ctl_table *ctl, int write, - void __user *buffer, size_t *lenp, loff_t *fpos) -{ - int new_cmode; - - if (!write) - return proc_dointvec(ctl, write, buffer, lenp, fpos); - - new_cmode = user_atoi(buffer, *lenp); - - return try_set_cmode(new_cmode)?:*lenp; -} - -static int try_set_p0(int new_p0) -{ - unsigned long flags, clkc; - - if (new_p0 < 0 || new_p0 > 1) - return -EINVAL; - - local_irq_save(flags); - __set_PSR(flags & ~PSR_ET); - - frv_dma_pause_all(); - - clkc = __get_CLKC(); - if (new_p0) - clkc |= CLKC_P0; - else - clkc &= ~CLKC_P0; - __set_CLKC(clkc); - - determine_clocks(0); - time_divisor_init(); - -#ifdef DEBUG - determine_clocks(1); -#endif - frv_dma_resume_all(); - local_irq_restore(flags); - return 0; -} - -static int try_set_cm(int new_cm) -{ - unsigned long flags, clkc; - - if (new_cm < 0 || new_cm > 1) - return -EINVAL; - - local_irq_save(flags); - __set_PSR(flags & ~PSR_ET); - - frv_dma_pause_all(); - - clkc = __get_CLKC(); - clkc &= ~CLKC_CM; - clkc |= new_cm; - __set_CLKC(clkc); - - determine_clocks(0); - time_divisor_init(); - -#if 1 //def DEBUG - determine_clocks(1); -#endif - - frv_dma_resume_all(); - local_irq_restore(flags); - return 0; -} - -static int p0_procctl(struct ctl_table *ctl, int write, - void __user *buffer, size_t *lenp, loff_t *fpos) -{ - int new_p0; - - if (!write) - return proc_dointvec(ctl, write, buffer, lenp, fpos); - - new_p0 = user_atoi(buffer, *lenp); - - return try_set_p0(new_p0)?:*lenp; -} - -static int cm_procctl(struct ctl_table *ctl, int write, - void __user *buffer, size_t *lenp, loff_t *fpos) -{ - int new_cm; - - if (!write) - return proc_dointvec(ctl, write, buffer, lenp, fpos); - - new_cm = user_atoi(buffer, *lenp); - - return try_set_cm(new_cm)?:*lenp; -} - -static struct ctl_table pm_table[] = -{ - { - .procname = "suspend", - .data = NULL, - .maxlen = 0, - .mode = 0200, - .proc_handler = sysctl_pm_do_suspend, - }, - { - .procname = "cmode", - .data = &clock_cmode_current, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = cmode_procctl, - }, - { - .procname = "p0", - .data = &clock_p0_current, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = p0_procctl, - }, - { - .procname = "cm", - .data = &clock_cm_current, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = cm_procctl, - }, - { } -}; - -static struct ctl_table pm_dir_table[] = -{ - { - .procname = "pm", - .mode = 0555, - .child = pm_table, - }, - { } -}; - -/* - * Initialize power interface - */ -static int __init pm_init(void) -{ - register_sysctl_table(pm_dir_table); - return 0; -} - -__initcall(pm_init); - -#endif diff --git a/arch/frv/kernel/process.c b/arch/frv/kernel/process.c deleted file mode 100644 index a957b374e3a6..000000000000 --- a/arch/frv/kernel/process.c +++ /dev/null @@ -1,275 +0,0 @@ -/* process.c: FRV specific parts of process handling - * - * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/m68k/kernel/process.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/sched/debug.h> -#include <linux/sched/task.h> -#include <linux/sched/task_stack.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/elf.h> -#include <linux/reboot.h> -#include <linux/interrupt.h> -#include <linux/pagemap.h> -#include <linux/rcupdate.h> - -#include <asm/asm-offsets.h> -#include <linux/uaccess.h> -#include <asm/setup.h> -#include <asm/pgtable.h> -#include <asm/tlb.h> -#include <asm/gdb-stub.h> -#include <asm/mb-regs.h> - -#include "local.h" - -asmlinkage void ret_from_fork(void); -asmlinkage void ret_from_kernel_thread(void); - -#include <asm/pgalloc.h> - -void (*pm_power_off)(void); -EXPORT_SYMBOL(pm_power_off); - -static void core_sleep_idle(void) -{ -#ifdef LED_DEBUG_SLEEP - /* Show that we're sleeping... */ - __set_LEDS(0x55aa); -#endif - frv_cpu_core_sleep(); -#ifdef LED_DEBUG_SLEEP - /* ... and that we woke up */ - __set_LEDS(0); -#endif - mb(); -} - -void arch_cpu_idle(void) -{ - if (!frv_dma_inprogress) - core_sleep_idle(); - else - local_irq_enable(); -} - -void machine_restart(char * __unused) -{ - unsigned long reset_addr; -#ifdef CONFIG_GDBSTUB - gdbstub_exit(0); -#endif - - if (PSR_IMPLE(__get_PSR()) == PSR_IMPLE_FR551) - reset_addr = 0xfefff500; - else - reset_addr = 0xfeff0500; - - /* Software reset. */ - asm volatile(" dcef @(gr0,gr0),1 ! membar !" - " sti %1,@(%0,0) !" - " nop ! nop ! nop ! nop ! nop ! " - " nop ! nop ! nop ! nop ! nop ! " - " nop ! nop ! nop ! nop ! nop ! " - " nop ! nop ! nop ! nop ! nop ! " - : : "r" (reset_addr), "r" (1) ); - - for (;;) - ; -} - -void machine_halt(void) -{ -#ifdef CONFIG_GDBSTUB - gdbstub_exit(0); -#endif - - for (;;); -} - -void machine_power_off(void) -{ -#ifdef CONFIG_GDBSTUB - gdbstub_exit(0); -#endif - - for (;;); -} - -void flush_thread(void) -{ - /* nothing */ -} - -inline unsigned long user_stack(const struct pt_regs *regs) -{ - while (regs->next_frame) - regs = regs->next_frame; - return user_mode(regs) ? regs->sp : 0; -} - -/* - * set up the kernel stack and exception frames for a new process - */ -int copy_thread(unsigned long clone_flags, - unsigned long usp, unsigned long arg, - struct task_struct *p) -{ - struct pt_regs *childregs; - - childregs = (struct pt_regs *) - (task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE); - - /* set up the userspace frame (the only place that the USP is stored) */ - *childregs = *current_pt_regs(); - - p->thread.frame = childregs; - p->thread.curr = p; - p->thread.sp = (unsigned long) childregs; - p->thread.fp = 0; - p->thread.lr = 0; - p->thread.frame0 = childregs; - - if (unlikely(p->flags & PF_KTHREAD)) { - childregs->gr9 = usp; /* function */ - childregs->gr8 = arg; - p->thread.pc = (unsigned long) ret_from_kernel_thread; - save_user_regs(p->thread.user); - return 0; - } - if (usp) - childregs->sp = usp; - childregs->next_frame = NULL; - - p->thread.pc = (unsigned long) ret_from_fork; - - /* the new TLS pointer is passed in as arg #5 to sys_clone() */ - if (clone_flags & CLONE_SETTLS) - childregs->gr29 = childregs->gr12; - - save_user_regs(p->thread.user); - - return 0; -} /* end copy_thread() */ - -unsigned long get_wchan(struct task_struct *p) -{ - struct pt_regs *regs0; - unsigned long fp, pc; - unsigned long stack_limit; - int count = 0; - if (!p || p == current || p->state == TASK_RUNNING) - return 0; - - stack_limit = (unsigned long) (p + 1); - fp = p->thread.fp; - regs0 = p->thread.frame0; - - do { - if (fp < stack_limit || fp >= (unsigned long) regs0 || fp & 3) - return 0; - - pc = ((unsigned long *) fp)[2]; - - /* FIXME: This depends on the order of these functions. */ - if (!in_sched_functions(pc)) - return pc; - - fp = *(unsigned long *) fp; - } while (count++ < 16); - - return 0; -} - -int elf_check_arch(const struct elf32_hdr *hdr) -{ - unsigned long hsr0 = __get_HSR(0); - unsigned long psr = __get_PSR(); - - if (hdr->e_machine != EM_FRV) - return 0; - - switch (hdr->e_flags & EF_FRV_GPR_MASK) { - case EF_FRV_GPR64: - if ((hsr0 & HSR0_GRN) == HSR0_GRN_32) - return 0; - case EF_FRV_GPR32: - case 0: - break; - default: - return 0; - } - - switch (hdr->e_flags & EF_FRV_FPR_MASK) { - case EF_FRV_FPR64: - if ((hsr0 & HSR0_FRN) == HSR0_FRN_32) - return 0; - case EF_FRV_FPR32: - case EF_FRV_FPR_NONE: - case 0: - break; - default: - return 0; - } - - if ((hdr->e_flags & EF_FRV_MULADD) == EF_FRV_MULADD) - if (PSR_IMPLE(psr) != PSR_IMPLE_FR405 && - PSR_IMPLE(psr) != PSR_IMPLE_FR451) - return 0; - - switch (hdr->e_flags & EF_FRV_CPU_MASK) { - case EF_FRV_CPU_GENERIC: - break; - case EF_FRV_CPU_FR300: - case EF_FRV_CPU_SIMPLE: - case EF_FRV_CPU_TOMCAT: - default: - return 0; - case EF_FRV_CPU_FR400: - if (PSR_IMPLE(psr) != PSR_IMPLE_FR401 && - PSR_IMPLE(psr) != PSR_IMPLE_FR405 && - PSR_IMPLE(psr) != PSR_IMPLE_FR451 && - PSR_IMPLE(psr) != PSR_IMPLE_FR551) - return 0; - break; - case EF_FRV_CPU_FR450: - if (PSR_IMPLE(psr) != PSR_IMPLE_FR451) - return 0; - break; - case EF_FRV_CPU_FR500: - if (PSR_IMPLE(psr) != PSR_IMPLE_FR501) - return 0; - break; - case EF_FRV_CPU_FR550: - if (PSR_IMPLE(psr) != PSR_IMPLE_FR551) - return 0; - break; - } - - return 1; -} - -int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs) -{ - memcpy(fpregs, - ¤t->thread.user->f, - sizeof(current->thread.user->f)); - return 1; -} diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c deleted file mode 100644 index 49768401ce0f..000000000000 --- a/arch/frv/kernel/ptrace.c +++ /dev/null @@ -1,377 +0,0 @@ -/* ptrace.c: FRV specific parts of process tracing - * - * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/m68k/kernel/ptrace.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/errno.h> -#include <linux/ptrace.h> -#include <linux/user.h> -#include <linux/security.h> -#include <linux/signal.h> -#include <linux/regset.h> -#include <linux/elf.h> -#include <linux/tracehook.h> - -#include <linux/uaccess.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/processor.h> -#include <asm/unistd.h> - -/* - * does not yet catch signals sent when the child dies. - * in exit.c or in signal.c. - */ - -/* - * retrieve the contents of FRV userspace general registers - */ -static int genregs_get(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) -{ - const struct user_int_regs *iregs = &target->thread.user->i; - int ret; - - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - iregs, 0, sizeof(*iregs)); - if (ret < 0) - return ret; - - return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, - sizeof(*iregs), -1); -} - -/* - * update the contents of the FRV userspace general registers - */ -static int genregs_set(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - const void *kbuf, const void __user *ubuf) -{ - struct user_int_regs *iregs = &target->thread.user->i; - unsigned int offs_gr0, offs_gr1; - int ret; - - /* not allowed to set PSR or __status */ - if (pos < offsetof(struct user_int_regs, psr) + sizeof(long) && - pos + count > offsetof(struct user_int_regs, psr)) - return -EIO; - - if (pos < offsetof(struct user_int_regs, __status) + sizeof(long) && - pos + count > offsetof(struct user_int_regs, __status)) - return -EIO; - - /* set the control regs */ - offs_gr0 = offsetof(struct user_int_regs, gr[0]); - offs_gr1 = offsetof(struct user_int_regs, gr[1]); - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - iregs, 0, offs_gr0); - if (ret < 0) - return ret; - - /* skip GR0/TBR */ - ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, - offs_gr0, offs_gr1); - if (ret < 0) - return ret; - - /* set the general regs */ - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - &iregs->gr[1], offs_gr1, sizeof(*iregs)); - if (ret < 0) - return ret; - - return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, - sizeof(*iregs), -1); -} - -/* - * retrieve the contents of FRV userspace FP/Media registers - */ -static int fpmregs_get(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - void *kbuf, void __user *ubuf) -{ - const struct user_fpmedia_regs *fpregs = &target->thread.user->f; - int ret; - - ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, - fpregs, 0, sizeof(*fpregs)); - if (ret < 0) - return ret; - - return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, - sizeof(*fpregs), -1); -} - -/* - * update the contents of the FRV userspace FP/Media registers - */ -static int fpmregs_set(struct task_struct *target, - const struct user_regset *regset, - unsigned int pos, unsigned int count, - const void *kbuf, const void __user *ubuf) -{ - struct user_fpmedia_regs *fpregs = &target->thread.user->f; - int ret; - - ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, - fpregs, 0, sizeof(*fpregs)); - if (ret < 0) - return ret; - - return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, - sizeof(*fpregs), -1); -} - -/* - * determine if the FP/Media registers have actually been used - */ -static int fpmregs_active(struct task_struct *target, - const struct user_regset *regset) -{ - return tsk_used_math(target) ? regset->n : 0; -} - -/* - * Define the register sets available on the FRV under Linux - */ -enum frv_regset { - REGSET_GENERAL, - REGSET_FPMEDIA, -}; - -static const struct user_regset frv_regsets[] = { - /* - * General register format is: - * PSR, ISR, CCR, CCCR, LR, LCR, PC, (STATUS), SYSCALLNO, ORIG_G8 - * GNER0-1, IACC0, TBR, GR1-63 - */ - [REGSET_GENERAL] = { - .core_note_type = NT_PRSTATUS, - .n = ELF_NGREG, - .size = sizeof(long), - .align = sizeof(long), - .get = genregs_get, - .set = genregs_set, - }, - /* - * FPU/Media register format is: - * FR0-63, FNER0-1, MSR0-1, ACC0-7, ACCG0-8, FSR - */ - [REGSET_FPMEDIA] = { - .core_note_type = NT_PRFPREG, - .n = sizeof(struct user_fpmedia_regs) / sizeof(long), - .size = sizeof(long), - .align = sizeof(long), - .get = fpmregs_get, - .set = fpmregs_set, - .active = fpmregs_active, - }, -}; - -static const struct user_regset_view user_frv_native_view = { - .name = "frv", - .e_machine = EM_FRV, - .regsets = frv_regsets, - .n = ARRAY_SIZE(frv_regsets), -}; - -const struct user_regset_view *task_user_regset_view(struct task_struct *task) -{ - return &user_frv_native_view; -} - -/* - * Get contents of register REGNO in task TASK. - */ -static inline long get_reg(struct task_struct *task, int regno) -{ - struct user_context *user = task->thread.user; - - if (regno < 0 || regno >= PT__END) - return 0; - - return ((unsigned long *) user)[regno]; -} - -/* - * Write contents of register REGNO in task TASK. - */ -static inline int put_reg(struct task_struct *task, int regno, - unsigned long data) -{ - struct user_context *user = task->thread.user; - - if (regno < 0 || regno >= PT__END) - return -EIO; - - switch (regno) { - case PT_GR(0): - return 0; - case PT_PSR: - case PT__STATUS: - return -EIO; - default: - ((unsigned long *) user)[regno] = data; - return 0; - } -} - -/* - * Called by kernel/ptrace.c when detaching.. - * - * Control h/w single stepping - */ -void user_enable_single_step(struct task_struct *child) -{ - child->thread.frame0->__status |= REG__STATUS_STEP; -} - -void user_disable_single_step(struct task_struct *child) -{ - child->thread.frame0->__status &= ~REG__STATUS_STEP; -} - -void ptrace_disable(struct task_struct *child) -{ - user_disable_single_step(child); -} - -long arch_ptrace(struct task_struct *child, long request, - unsigned long addr, unsigned long data) -{ - unsigned long tmp; - int ret; - int regno = addr >> 2; - unsigned long __user *datap = (unsigned long __user *) data; - - switch (request) { - /* read the word at location addr in the USER area. */ - case PTRACE_PEEKUSR: { - tmp = 0; - ret = -EIO; - if (addr & 3) - break; - - ret = 0; - switch (regno) { - case 0 ... PT__END - 1: - tmp = get_reg(child, regno); - break; - - case PT__END + 0: - tmp = child->mm->end_code - child->mm->start_code; - break; - - case PT__END + 1: - tmp = child->mm->end_data - child->mm->start_data; - break; - - case PT__END + 2: - tmp = child->mm->start_stack - child->mm->start_brk; - break; - - case PT__END + 3: - tmp = child->mm->start_code; - break; - - case PT__END + 4: - tmp = child->mm->start_stack; - break; - - default: - ret = -EIO; - break; - } - - if (ret == 0) - ret = put_user(tmp, datap); - break; - } - - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ - ret = -EIO; - if (addr & 3) - break; - - switch (regno) { - case 0 ... PT__END - 1: - ret = put_reg(child, regno, data); - break; - } - break; - - case PTRACE_GETREGS: /* Get all integer regs from the child. */ - return copy_regset_to_user(child, &user_frv_native_view, - REGSET_GENERAL, - 0, sizeof(child->thread.user->i), - datap); - - case PTRACE_SETREGS: /* Set all integer regs in the child. */ - return copy_regset_from_user(child, &user_frv_native_view, - REGSET_GENERAL, - 0, sizeof(child->thread.user->i), - datap); - - case PTRACE_GETFPREGS: /* Get the child FP/Media state. */ - return copy_regset_to_user(child, &user_frv_native_view, - REGSET_FPMEDIA, - 0, sizeof(child->thread.user->f), - datap); - - case PTRACE_SETFPREGS: /* Set the child FP/Media state. */ - return copy_regset_from_user(child, &user_frv_native_view, - REGSET_FPMEDIA, - 0, sizeof(child->thread.user->f), - datap); - - default: - ret = ptrace_request(child, request, addr, data); - break; - } - return ret; -} - -/* - * handle tracing of system call entry - * - return the revised system call number or ULONG_MAX to cause ENOSYS - */ -asmlinkage unsigned long syscall_trace_entry(void) -{ - __frame->__status |= REG__STATUS_SYSC_ENTRY; - if (tracehook_report_syscall_entry(__frame)) { - /* tracing decided this syscall should not happen, so - * We'll return a bogus call number to get an ENOSYS - * error, but leave the original number in - * __frame->syscallno - */ - return ULONG_MAX; - } - - return __frame->syscallno; -} - -/* - * handle tracing of system call exit - */ -asmlinkage void syscall_trace_exit(void) -{ - __frame->__status |= REG__STATUS_SYSC_EXIT; - tracehook_report_syscall_exit(__frame, 0); -} diff --git a/arch/frv/kernel/setup.c b/arch/frv/kernel/setup.c deleted file mode 100644 index 9f4a9a607dbe..000000000000 --- a/arch/frv/kernel/setup.c +++ /dev/null @@ -1,1178 +0,0 @@ -/* setup.c: FRV specific setup - * - * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/m68k/kernel/setup.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <generated/utsrelease.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/fs.h> -#include <linux/mm.h> -#include <linux/fb.h> -#include <linux/console.h> -#include <linux/genhd.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/major.h> -#include <linux/bootmem.h> -#include <linux/highmem.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/serial_reg.h> -#include <linux/serial_8250.h> - -#include <asm/setup.h> -#include <asm/irq.h> -#include <asm/sections.h> -#include <asm/pgalloc.h> -#include <asm/busctl-regs.h> -#include <asm/serial-regs.h> -#include <asm/timer-regs.h> -#include <asm/irc-regs.h> -#include <asm/spr-regs.h> -#include <asm/mb-regs.h> -#include <asm/mb93493-regs.h> -#include <asm/gdb-stub.h> -#include <asm/io.h> - -#ifdef CONFIG_BLK_DEV_INITRD -#include <asm/pgtable.h> -#endif - -#include "local.h" - -#ifdef CONFIG_MB93090_MB00 -static void __init mb93090_display(void); -#endif -#ifdef CONFIG_MMU -static void __init setup_linux_memory(void); -#else -static void __init setup_uclinux_memory(void); -#endif - -#ifdef CONFIG_MB93090_MB00 -static char __initdata mb93090_banner[] = "FJ/RH FR-V Linux"; -static char __initdata mb93090_version[] = UTS_RELEASE; - -int __nongprelbss mb93090_mb00_detected; -#endif - -const char __frv_unknown_system[] = "unknown"; -const char __frv_mb93091_cb10[] = "mb93091-cb10"; -const char __frv_mb93091_cb11[] = "mb93091-cb11"; -const char __frv_mb93091_cb30[] = "mb93091-cb30"; -const char __frv_mb93091_cb41[] = "mb93091-cb41"; -const char __frv_mb93091_cb60[] = "mb93091-cb60"; -const char __frv_mb93091_cb70[] = "mb93091-cb70"; -const char __frv_mb93091_cb451[] = "mb93091-cb451"; -const char __frv_mb93090_mb00[] = "mb93090-mb00"; - -const char __frv_mb93493[] = "mb93493"; - -const char __frv_mb93093[] = "mb93093"; - -static const char *__nongprelbss cpu_series; -static const char *__nongprelbss cpu_core; -static const char *__nongprelbss cpu_silicon; -static const char *__nongprelbss cpu_mmu; -static const char *__nongprelbss cpu_system; -static const char *__nongprelbss cpu_board1; -static const char *__nongprelbss cpu_board2; - -static unsigned long __nongprelbss cpu_psr_all; -static unsigned long __nongprelbss cpu_hsr0_all; - -unsigned long __nongprelbss pdm_suspend_mode; - -unsigned long __nongprelbss rom_length; -unsigned long __nongprelbss memory_start; -unsigned long __nongprelbss memory_end; - -unsigned long __nongprelbss dma_coherent_mem_start; -unsigned long __nongprelbss dma_coherent_mem_end; - -unsigned long __initdata __sdram_old_base; -unsigned long __initdata num_mappedpages; - -char __initdata command_line[COMMAND_LINE_SIZE]; -char __initdata redboot_command_line[COMMAND_LINE_SIZE]; - -#ifdef CONFIG_PM -#define __pminit -#define __pminitdata -#define __pminitconst -#else -#define __pminit __init -#define __pminitdata __initdata -#define __pminitconst __initconst -#endif - -struct clock_cmode { - uint8_t xbus, sdram, corebus, core, dsu; -}; - -#define _frac(N,D) ((N)<<4 | (D)) -#define _x0_16 _frac(1,6) -#define _x0_25 _frac(1,4) -#define _x0_33 _frac(1,3) -#define _x0_375 _frac(3,8) -#define _x0_5 _frac(1,2) -#define _x0_66 _frac(2,3) -#define _x0_75 _frac(3,4) -#define _x1 _frac(1,1) -#define _x1_5 _frac(3,2) -#define _x2 _frac(2,1) -#define _x3 _frac(3,1) -#define _x4 _frac(4,1) -#define _x4_5 _frac(9,2) -#define _x6 _frac(6,1) -#define _x8 _frac(8,1) -#define _x9 _frac(9,1) - -int __nongprelbss clock_p0_current; -int __nongprelbss clock_cm_current; -int __nongprelbss clock_cmode_current; -#ifdef CONFIG_PM -int __nongprelbss clock_cmodes_permitted; -unsigned long __nongprelbss clock_bits_settable; -#endif - -static struct clock_cmode __pminitdata undef_clock_cmode = { _x1, _x1, _x1, _x1, _x1 }; - -static struct clock_cmode __pminitdata clock_cmodes_fr401_fr403[16] = { - [4] = { _x1, _x1, _x2, _x2, _x0_25 }, - [5] = { _x1, _x2, _x4, _x4, _x0_5 }, - [8] = { _x1, _x1, _x1, _x2, _x0_25 }, - [9] = { _x1, _x2, _x2, _x4, _x0_5 }, - [11] = { _x1, _x4, _x4, _x8, _x1 }, - [12] = { _x1, _x1, _x2, _x4, _x0_5 }, - [13] = { _x1, _x2, _x4, _x8, _x1 }, -}; - -static struct clock_cmode __pminitdata clock_cmodes_fr405[16] = { - [0] = { _x1, _x1, _x1, _x1, _x0_5 }, - [1] = { _x1, _x1, _x1, _x3, _x0_25 }, - [2] = { _x1, _x1, _x2, _x6, _x0_5 }, - [3] = { _x1, _x2, _x2, _x6, _x0_5 }, - [4] = { _x1, _x1, _x2, _x2, _x0_16 }, - [8] = { _x1, _x1, _x1, _x2, _x0_16 }, - [9] = { _x1, _x2, _x2, _x4, _x0_33 }, - [12] = { _x1, _x1, _x2, _x4, _x0_33 }, - [14] = { _x1, _x3, _x3, _x9, _x0_75 }, - [15] = { _x1, _x1_5, _x1_5, _x4_5, _x0_375 }, - -#define CLOCK_CMODES_PERMITTED_FR405 0xd31f -}; - -static struct clock_cmode __pminitdata clock_cmodes_fr555[16] = { - [0] = { _x1, _x2, _x2, _x4, _x0_33 }, - [1] = { _x1, _x3, _x3, _x6, _x0_5 }, - [2] = { _x1, _x2, _x4, _x8, _x0_66 }, - [3] = { _x1, _x1_5, _x3, _x6, _x0_5 }, - [4] = { _x1, _x3, _x3, _x9, _x0_75 }, - [5] = { _x1, _x2, _x2, _x6, _x0_5 }, - [6] = { _x1, _x1_5, _x1_5, _x4_5, _x0_375 }, -}; - -static const struct clock_cmode __pminitconst *clock_cmodes; -static int __pminitdata clock_doubled; - -static struct uart_port __pminitdata __frv_uart0 = { - .uartclk = 0, - .membase = (char *) UART0_BASE, - .irq = IRQ_CPU_UART0, - .regshift = 3, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -}; - -static struct uart_port __pminitdata __frv_uart1 = { - .uartclk = 0, - .membase = (char *) UART1_BASE, - .irq = IRQ_CPU_UART1, - .regshift = 3, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -}; - -#if 0 -static void __init printk_xampr(unsigned long ampr, unsigned long amlr, char i_d, int n) -{ - unsigned long phys, virt, cxn, size; - -#ifdef CONFIG_MMU - virt = amlr & 0xffffc000; - cxn = amlr & 0x3fff; -#else - virt = ampr & 0xffffc000; - cxn = 0; -#endif - phys = ampr & xAMPRx_PPFN; - size = 1 << (((ampr & xAMPRx_SS) >> 4) + 17); - - printk("%cAMPR%d: va %08lx-%08lx [pa %08lx] %c%c%c%c [cxn:%04lx]\n", - i_d, n, - virt, virt + size - 1, - phys, - ampr & xAMPRx_S ? 'S' : '-', - ampr & xAMPRx_C ? 'C' : '-', - ampr & DAMPRx_WP ? 'W' : '-', - ampr & xAMPRx_V ? 'V' : '-', - cxn - ); -} -#endif - -/*****************************************************************************/ -/* - * dump the memory map - */ -static void __init dump_memory_map(void) -{ - -#if 0 - /* dump the protection map */ - printk_xampr(__get_IAMPR(0), __get_IAMLR(0), 'I', 0); - printk_xampr(__get_IAMPR(1), __get_IAMLR(1), 'I', 1); - printk_xampr(__get_IAMPR(2), __get_IAMLR(2), 'I', 2); - printk_xampr(__get_IAMPR(3), __get_IAMLR(3), 'I', 3); - printk_xampr(__get_IAMPR(4), __get_IAMLR(4), 'I', 4); - printk_xampr(__get_IAMPR(5), __get_IAMLR(5), 'I', 5); - printk_xampr(__get_IAMPR(6), __get_IAMLR(6), 'I', 6); - printk_xampr(__get_IAMPR(7), __get_IAMLR(7), 'I', 7); - printk_xampr(__get_IAMPR(8), __get_IAMLR(8), 'I', 8); - printk_xampr(__get_IAMPR(9), __get_IAMLR(9), 'i', 9); - printk_xampr(__get_IAMPR(10), __get_IAMLR(10), 'I', 10); - printk_xampr(__get_IAMPR(11), __get_IAMLR(11), 'I', 11); - printk_xampr(__get_IAMPR(12), __get_IAMLR(12), 'I', 12); - printk_xampr(__get_IAMPR(13), __get_IAMLR(13), 'I', 13); - printk_xampr(__get_IAMPR(14), __get_IAMLR(14), 'I', 14); - printk_xampr(__get_IAMPR(15), __get_IAMLR(15), 'I', 15); - - printk_xampr(__get_DAMPR(0), __get_DAMLR(0), 'D', 0); - printk_xampr(__get_DAMPR(1), __get_DAMLR(1), 'D', 1); - printk_xampr(__get_DAMPR(2), __get_DAMLR(2), 'D', 2); - printk_xampr(__get_DAMPR(3), __get_DAMLR(3), 'D', 3); - printk_xampr(__get_DAMPR(4), __get_DAMLR(4), 'D', 4); - printk_xampr(__get_DAMPR(5), __get_DAMLR(5), 'D', 5); - printk_xampr(__get_DAMPR(6), __get_DAMLR(6), 'D', 6); - printk_xampr(__get_DAMPR(7), __get_DAMLR(7), 'D', 7); - printk_xampr(__get_DAMPR(8), __get_DAMLR(8), 'D', 8); - printk_xampr(__get_DAMPR(9), __get_DAMLR(9), 'D', 9); - printk_xampr(__get_DAMPR(10), __get_DAMLR(10), 'D', 10); - printk_xampr(__get_DAMPR(11), __get_DAMLR(11), 'D', 11); - printk_xampr(__get_DAMPR(12), __get_DAMLR(12), 'D', 12); - printk_xampr(__get_DAMPR(13), __get_DAMLR(13), 'D', 13); - printk_xampr(__get_DAMPR(14), __get_DAMLR(14), 'D', 14); - printk_xampr(__get_DAMPR(15), __get_DAMLR(15), 'D', 15); -#endif - -#if 0 - /* dump the bus controller registers */ - printk("LGCR: %08lx\n", __get_LGCR()); - printk("Master: %08lx-%08lx CR=%08lx\n", - __get_LEMBR(), __get_LEMBR() + __get_LEMAM(), - __get_LMAICR()); - - int loop; - for (loop = 1; loop <= 7; loop++) { - unsigned long lcr = __get_LCR(loop), lsbr = __get_LSBR(loop); - printk("CS#%d: %08lx-%08lx %c%c%c%c%c%c%c%c%c\n", - loop, - lsbr, lsbr + __get_LSAM(loop), - lcr & 0x80000000 ? 'r' : '-', - lcr & 0x40000000 ? 'w' : '-', - lcr & 0x08000000 ? 'b' : '-', - lcr & 0x04000000 ? 'B' : '-', - lcr & 0x02000000 ? 'C' : '-', - lcr & 0x01000000 ? 'D' : '-', - lcr & 0x00800000 ? 'W' : '-', - lcr & 0x00400000 ? 'R' : '-', - (lcr & 0x00030000) == 0x00000000 ? '4' : - (lcr & 0x00030000) == 0x00010000 ? '2' : - (lcr & 0x00030000) == 0x00020000 ? '1' : - '-' - ); - } -#endif - -#if 0 - printk("\n"); -#endif -} /* end dump_memory_map() */ - -/*****************************************************************************/ -/* - * attempt to detect a VDK motherboard and DAV daughter board on an MB93091 system - */ -#ifdef CONFIG_MB93091_VDK -static void __init detect_mb93091(void) -{ -#ifdef CONFIG_MB93090_MB00 - /* Detect CB70 without motherboard */ - if (!(cpu_system == __frv_mb93091_cb70 && ((*(unsigned short *)0xffc00030) & 0x100))) { - cpu_board1 = __frv_mb93090_mb00; - mb93090_mb00_detected = 1; - } -#endif - -#ifdef CONFIG_FUJITSU_MB93493 - cpu_board2 = __frv_mb93493; -#endif - -} /* end detect_mb93091() */ -#endif - -/*****************************************************************************/ -/* - * determine the CPU type and set appropriate parameters - * - * Family Series CPU Core Silicon Imple Vers - * ---------------------------------------------------------- - * FR-V --+-> FR400 --+-> FR401 --+-> MB93401 02 00 [1] - * | | | - * | | +-> MB93401/A 02 01 - * | | | - * | | +-> MB93403 02 02 - * | | - * | +-> FR405 ----> MB93405 04 00 - * | - * +-> FR450 ----> FR451 ----> MB93451 05 00 - * | - * +-> FR500 ----> FR501 --+-> MB93501 01 01 [2] - * | | - * | +-> MB93501/A 01 02 - * | - * +-> FR550 --+-> FR551 ----> MB93555 03 01 - * - * [1] The MB93401 is an obsolete CPU replaced by the MB93401A - * [2] The MB93501 is an obsolete CPU replaced by the MB93501A - * - * Imple is PSR(Processor Status Register)[31:28]. - * Vers is PSR(Processor Status Register)[27:24]. - * - * A "Silicon" consists of CPU core and some on-chip peripherals. - */ -static void __init determine_cpu(void) -{ - unsigned long hsr0 = __get_HSR(0); - unsigned long psr = __get_PSR(); - - /* work out what selectable services the CPU supports */ - __set_PSR(psr | PSR_EM | PSR_EF | PSR_CM | PSR_NEM); - cpu_psr_all = __get_PSR(); - __set_PSR(psr); - - __set_HSR(0, hsr0 | HSR0_GRLE | HSR0_GRHE | HSR0_FRLE | HSR0_FRHE); - cpu_hsr0_all = __get_HSR(0); - __set_HSR(0, hsr0); - - /* derive other service specs from the CPU type */ - cpu_series = "unknown"; - cpu_core = "unknown"; - cpu_silicon = "unknown"; - cpu_mmu = "Prot"; - cpu_system = __frv_unknown_system; - clock_cmodes = NULL; - clock_doubled = 0; -#ifdef CONFIG_PM - clock_bits_settable = CLOCK_BIT_CM_H | CLOCK_BIT_CM_M | CLOCK_BIT_P0; -#endif - - switch (PSR_IMPLE(psr)) { - case PSR_IMPLE_FR401: - cpu_series = "fr400"; - cpu_core = "fr401"; - pdm_suspend_mode = HSR0_PDM_PLL_RUN; - - switch (PSR_VERSION(psr)) { - case PSR_VERSION_FR401_MB93401: - cpu_silicon = "mb93401"; - cpu_system = __frv_mb93091_cb10; - clock_cmodes = clock_cmodes_fr401_fr403; - clock_doubled = 1; - break; - case PSR_VERSION_FR401_MB93401A: - cpu_silicon = "mb93401/A"; - cpu_system = __frv_mb93091_cb11; - clock_cmodes = clock_cmodes_fr401_fr403; - break; - case PSR_VERSION_FR401_MB93403: - cpu_silicon = "mb93403"; -#ifndef CONFIG_MB93093_PDK - cpu_system = __frv_mb93091_cb30; -#else - cpu_system = __frv_mb93093; -#endif - clock_cmodes = clock_cmodes_fr401_fr403; - break; - default: - break; - } - break; - - case PSR_IMPLE_FR405: - cpu_series = "fr400"; - cpu_core = "fr405"; - pdm_suspend_mode = HSR0_PDM_PLL_STOP; - - switch (PSR_VERSION(psr)) { - case PSR_VERSION_FR405_MB93405: - cpu_silicon = "mb93405"; - cpu_system = __frv_mb93091_cb60; - clock_cmodes = clock_cmodes_fr405; -#ifdef CONFIG_PM - clock_bits_settable |= CLOCK_BIT_CMODE; - clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405; -#endif - - /* the FPGA on the CB70 has extra registers - * - it has 0x0046 in the VDK_ID FPGA register at 0x1a0, which is - * how we tell the difference between it and a CB60 - */ - if (*(volatile unsigned short *) 0xffc001a0 == 0x0046) - cpu_system = __frv_mb93091_cb70; - break; - default: - break; - } - break; - - case PSR_IMPLE_FR451: - cpu_series = "fr450"; - cpu_core = "fr451"; - pdm_suspend_mode = HSR0_PDM_PLL_STOP; -#ifdef CONFIG_PM - clock_bits_settable |= CLOCK_BIT_CMODE; - clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405; -#endif - switch (PSR_VERSION(psr)) { - case PSR_VERSION_FR451_MB93451: - cpu_silicon = "mb93451"; - cpu_mmu = "Prot, SAT, xSAT, DAT"; - cpu_system = __frv_mb93091_cb451; - clock_cmodes = clock_cmodes_fr405; - break; - default: - break; - } - break; - - case PSR_IMPLE_FR501: - cpu_series = "fr500"; - cpu_core = "fr501"; - pdm_suspend_mode = HSR0_PDM_PLL_STOP; - - switch (PSR_VERSION(psr)) { - case PSR_VERSION_FR501_MB93501: cpu_silicon = "mb93501"; break; - case PSR_VERSION_FR501_MB93501A: cpu_silicon = "mb93501/A"; break; - default: - break; - } - break; - - case PSR_IMPLE_FR551: - cpu_series = "fr550"; - cpu_core = "fr551"; - pdm_suspend_mode = HSR0_PDM_PLL_RUN; - - switch (PSR_VERSION(psr)) { - case PSR_VERSION_FR551_MB93555: - cpu_silicon = "mb93555"; - cpu_mmu = "Prot, SAT"; - cpu_system = __frv_mb93091_cb41; - clock_cmodes = clock_cmodes_fr555; - clock_doubled = 1; - break; - default: - break; - } - break; - - default: - break; - } - - printk("- Series:%s CPU:%s Silicon:%s\n", - cpu_series, cpu_core, cpu_silicon); - -#ifdef CONFIG_MB93091_VDK - detect_mb93091(); -#endif - -#if defined(CONFIG_MB93093_PDK) && defined(CONFIG_FUJITSU_MB93493) - cpu_board2 = __frv_mb93493; -#endif - -} /* end determine_cpu() */ - -/*****************************************************************************/ -/* - * calculate the bus clock speed - */ -void __pminit determine_clocks(int verbose) -{ - const struct clock_cmode *mode, *tmode; - unsigned long clkc, psr, quot; - - clkc = __get_CLKC(); - psr = __get_PSR(); - - clock_p0_current = !!(clkc & CLKC_P0); - clock_cm_current = clkc & CLKC_CM; - clock_cmode_current = (clkc & CLKC_CMODE) >> CLKC_CMODE_s; - - if (verbose) - printk("psr=%08lx hsr0=%08lx clkc=%08lx\n", psr, __get_HSR(0), clkc); - - /* the CB70 has some alternative ways of setting the clock speed through switches accessed - * through the FPGA. */ - if (cpu_system == __frv_mb93091_cb70) { - unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL; - - if (clkswr & 0x1000) - __clkin_clock_speed_HZ = 60000000UL; - else - __clkin_clock_speed_HZ = - ((clkswr >> 8) & 0xf) * 10000000 + - ((clkswr >> 4) & 0xf) * 1000000 + - ((clkswr ) & 0xf) * 100000; - } - /* the FR451 is currently fixed at 24MHz */ - else if (cpu_system == __frv_mb93091_cb451) { - //__clkin_clock_speed_HZ = 24000000UL; // CB451-FPGA - unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL; - - if (clkswr & 0x1000) - __clkin_clock_speed_HZ = 60000000UL; - else - __clkin_clock_speed_HZ = - ((clkswr >> 8) & 0xf) * 10000000 + - ((clkswr >> 4) & 0xf) * 1000000 + - ((clkswr ) & 0xf) * 100000; - } - /* otherwise determine the clockspeed from VDK or other registers */ - else { - __clkin_clock_speed_HZ = __get_CLKIN(); - } - - /* look up the appropriate clock relationships table entry */ - mode = &undef_clock_cmode; - if (clock_cmodes) { - tmode = &clock_cmodes[(clkc & CLKC_CMODE) >> CLKC_CMODE_s]; - if (tmode->xbus) - mode = tmode; - } - -#define CLOCK(SRC,RATIO) ((SRC) * (((RATIO) >> 4) & 0x0f) / ((RATIO) & 0x0f)) - - if (clock_doubled) - __clkin_clock_speed_HZ <<= 1; - - __ext_bus_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->xbus); - __sdram_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->sdram); - __dsu_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->dsu); - - switch (clkc & CLKC_CM) { - case 0: /* High */ - __core_bus_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->corebus); - __core_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->core); - break; - case 1: /* Medium */ - __core_bus_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->sdram); - __core_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->sdram); - break; - case 2: /* Low; not supported */ - case 3: /* UNDEF */ - printk("Unsupported CLKC CM %ld\n", clkc & CLKC_CM); - panic("Bye"); - } - - __res_bus_clock_speed_HZ = __ext_bus_clock_speed_HZ; - if (clkc & CLKC_P0) - __res_bus_clock_speed_HZ >>= 1; - - if (verbose) { - printk("CLKIN: %lu.%3.3luMHz\n", - __clkin_clock_speed_HZ / 1000000, - (__clkin_clock_speed_HZ / 1000) % 1000); - - printk("CLKS:" - " ext=%luMHz res=%luMHz sdram=%luMHz cbus=%luMHz core=%luMHz dsu=%luMHz\n", - __ext_bus_clock_speed_HZ / 1000000, - __res_bus_clock_speed_HZ / 1000000, - __sdram_clock_speed_HZ / 1000000, - __core_bus_clock_speed_HZ / 1000000, - __core_clock_speed_HZ / 1000000, - __dsu_clock_speed_HZ / 1000000 - ); - } - - /* calculate the number of __delay() loop iterations per sec (2 insn loop) */ - __delay_loops_MHz = __core_clock_speed_HZ / (1000000 * 2); - - /* set the serial prescaler */ - __serial_clock_speed_HZ = __res_bus_clock_speed_HZ; - quot = 1; - while (__serial_clock_speed_HZ / quot / 16 / 65536 > 3000) - quot += 1; - - /* double the divisor if P0 is clear, so that if/when P0 is set, it's still achievable - * - we have to be careful - dividing too much can mean we can't get 115200 baud - */ - if (__serial_clock_speed_HZ > 32000000 && !(clkc & CLKC_P0)) - quot <<= 1; - - __serial_clock_speed_HZ /= quot; - __frv_uart0.uartclk = __serial_clock_speed_HZ; - __frv_uart1.uartclk = __serial_clock_speed_HZ; - - if (verbose) - printk(" uart=%luMHz\n", __serial_clock_speed_HZ / 1000000 * quot); - - while (!(__get_UART0_LSR() & UART_LSR_TEMT)) - continue; - - while (!(__get_UART1_LSR() & UART_LSR_TEMT)) - continue; - - __set_UCPVR(quot); - __set_UCPSR(0); -} /* end determine_clocks() */ - -/*****************************************************************************/ -/* - * reserve some DMA consistent memory - */ -#ifdef CONFIG_RESERVE_DMA_COHERENT -static void __init reserve_dma_coherent(void) -{ - unsigned long ampr; - - /* find the first non-kernel memory tile and steal it */ -#define __steal_AMPR(r) \ - if (__get_DAMPR(r) & xAMPRx_V) { \ - ampr = __get_DAMPR(r); \ - __set_DAMPR(r, ampr | xAMPRx_S | xAMPRx_C); \ - __set_IAMPR(r, 0); \ - goto found; \ - } - - __steal_AMPR(1); - __steal_AMPR(2); - __steal_AMPR(3); - __steal_AMPR(4); - __steal_AMPR(5); - __steal_AMPR(6); - - if (PSR_IMPLE(__get_PSR()) == PSR_IMPLE_FR551) { - __steal_AMPR(7); - __steal_AMPR(8); - __steal_AMPR(9); - __steal_AMPR(10); - __steal_AMPR(11); - __steal_AMPR(12); - __steal_AMPR(13); - __steal_AMPR(14); - } - - /* unable to grant any DMA consistent memory */ - printk("No DMA consistent memory reserved\n"); - return; - - found: - dma_coherent_mem_start = ampr & xAMPRx_PPFN; - ampr &= xAMPRx_SS; - ampr >>= 4; - ampr = 1 << (ampr - 3 + 20); - dma_coherent_mem_end = dma_coherent_mem_start + ampr; - - printk("DMA consistent memory reserved %lx-%lx\n", - dma_coherent_mem_start, dma_coherent_mem_end); - -} /* end reserve_dma_coherent() */ -#endif - -/*****************************************************************************/ -/* - * calibrate the delay loop - */ -void calibrate_delay(void) -{ - loops_per_jiffy = __delay_loops_MHz * (1000000 / HZ); - - printk("Calibrating delay loop... %lu.%02lu BogoMIPS\n", - loops_per_jiffy / (500000 / HZ), - (loops_per_jiffy / (5000 / HZ)) % 100); - -} /* end calibrate_delay() */ - -/*****************************************************************************/ -/* - * look through the command line for some things we need to know immediately - */ -static void __init parse_cmdline_early(char *cmdline) -{ - if (!cmdline) - return; - - while (*cmdline) { - if (*cmdline == ' ') - cmdline++; - - /* "mem=XXX[kKmM]" sets SDRAM size to <mem>, overriding the value we worked - * out from the SDRAM controller mask register - */ - if (!strncmp(cmdline, "mem=", 4)) { - unsigned long long mem_size; - - mem_size = memparse(cmdline + 4, &cmdline); - memory_end = memory_start + mem_size; - } - - while (*cmdline && *cmdline != ' ') - cmdline++; - } - -} /* end parse_cmdline_early() */ - -/*****************************************************************************/ -/* - * - */ -void __init setup_arch(char **cmdline_p) -{ -#ifdef CONFIG_MMU - printk("Linux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n"); -#else - printk("uClinux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n"); -#endif - - memcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE); - - determine_cpu(); - determine_clocks(1); - - /* For printk-directly-beats-on-serial-hardware hack */ - console_set_baud(115200); -#ifdef CONFIG_GDBSTUB - gdbstub_set_baud(115200); -#endif - -#ifdef CONFIG_RESERVE_DMA_COHERENT - reserve_dma_coherent(); -#endif - dump_memory_map(); - -#ifdef CONFIG_MB93090_MB00 - if (mb93090_mb00_detected) - mb93090_display(); -#endif - - /* register those serial ports that are available */ -#ifdef CONFIG_FRV_ONCPU_SERIAL -#ifndef CONFIG_GDBSTUB_UART0 - __reg(UART0_BASE + UART_IER * 8) = 0; - early_serial_setup(&__frv_uart0); -#endif -#ifndef CONFIG_GDBSTUB_UART1 - __reg(UART1_BASE + UART_IER * 8) = 0; - early_serial_setup(&__frv_uart1); -#endif -#endif - - /* deal with the command line - RedBoot may have passed one to the kernel */ - memcpy(command_line, boot_command_line, sizeof(command_line)); - *cmdline_p = &command_line[0]; - parse_cmdline_early(command_line); - - /* set up the memory description - * - by now the stack is part of the init task */ - printk("Memory %08lx-%08lx\n", memory_start, memory_end); - - BUG_ON(memory_start == memory_end); - - init_mm.start_code = (unsigned long) _stext; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; -#if 0 /* DAVIDM - don't set brk just incase someone decides to use it */ - init_mm.brk = (unsigned long) &_end; -#else - init_mm.brk = (unsigned long) 0; -#endif - -#ifdef DEBUG - printk("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n", - _stext, _etext, _sdata, _edata, __bss_start, __bss_stop); -#endif - -#ifdef CONFIG_VT -#if defined(CONFIG_VGA_CONSOLE) - conswitchp = &vga_con; -#elif defined(CONFIG_DUMMY_CONSOLE) - conswitchp = &dummy_con; -#endif -#endif - -#ifdef CONFIG_MMU - setup_linux_memory(); -#else - setup_uclinux_memory(); -#endif - - /* get kmalloc into gear */ - paging_init(); - - /* init DMA */ - frv_dma_init(); -#ifdef DEBUG - printk("Done setup_arch\n"); -#endif - - /* start the decrement timer running */ -// asm volatile("movgs %0,timerd" :: "r"(10000000)); -// __set_HSR(0, __get_HSR(0) | HSR0_ETMD); - -} /* end setup_arch() */ - -#if 0 -/*****************************************************************************/ -/* - * - */ -static int setup_arch_serial(void) -{ - /* register those serial ports that are available */ -#ifndef CONFIG_GDBSTUB_UART0 - early_serial_setup(&__frv_uart0); -#endif -#ifndef CONFIG_GDBSTUB_UART1 - early_serial_setup(&__frv_uart1); -#endif - - return 0; -} /* end setup_arch_serial() */ - -late_initcall(setup_arch_serial); -#endif - -/*****************************************************************************/ -/* - * set up the memory map for normal MMU linux - */ -#ifdef CONFIG_MMU -static void __init setup_linux_memory(void) -{ - unsigned long bootmap_size, low_top_pfn, kstart, kend, high_mem; - unsigned long physpages; - - kstart = (unsigned long) &__kernel_image_start - PAGE_OFFSET; - kend = (unsigned long) &__kernel_image_end - PAGE_OFFSET; - - kstart = kstart & PAGE_MASK; - kend = (kend + PAGE_SIZE - 1) & PAGE_MASK; - - /* give all the memory to the bootmap allocator, tell it to put the - * boot mem_map immediately following the kernel image - */ - bootmap_size = init_bootmem_node(NODE_DATA(0), - kend >> PAGE_SHIFT, /* map addr */ - memory_start >> PAGE_SHIFT, /* start of RAM */ - memory_end >> PAGE_SHIFT /* end of RAM */ - ); - - /* pass the memory that the kernel can immediately use over to the bootmem allocator */ - max_mapnr = physpages = (memory_end - memory_start) >> PAGE_SHIFT; - low_top_pfn = (KERNEL_LOWMEM_END - KERNEL_LOWMEM_START) >> PAGE_SHIFT; - high_mem = 0; - - if (physpages > low_top_pfn) { -#ifdef CONFIG_HIGHMEM - high_mem = physpages - low_top_pfn; -#else - max_mapnr = physpages = low_top_pfn; -#endif - } - else { - low_top_pfn = physpages; - } - - min_low_pfn = memory_start >> PAGE_SHIFT; - max_low_pfn = low_top_pfn; - max_pfn = memory_end >> PAGE_SHIFT; - - num_mappedpages = low_top_pfn; - - printk(KERN_NOTICE "%ldMB LOWMEM available.\n", low_top_pfn >> (20 - PAGE_SHIFT)); - - free_bootmem(memory_start, low_top_pfn << PAGE_SHIFT); - -#ifdef CONFIG_HIGHMEM - if (high_mem) - printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", high_mem >> (20 - PAGE_SHIFT)); -#endif - - /* take back the memory occupied by the kernel image and the bootmem alloc map */ - reserve_bootmem(kstart, kend - kstart + bootmap_size, - BOOTMEM_DEFAULT); - - /* reserve the memory occupied by the initial ramdisk */ -#ifdef CONFIG_BLK_DEV_INITRD - if (LOADER_TYPE && INITRD_START) { - if (INITRD_START + INITRD_SIZE <= (low_top_pfn << PAGE_SHIFT)) { - reserve_bootmem(INITRD_START, INITRD_SIZE, - BOOTMEM_DEFAULT); - initrd_start = INITRD_START + PAGE_OFFSET; - initrd_end = initrd_start + INITRD_SIZE; - } - else { - printk(KERN_ERR - "initrd extends beyond end of memory (0x%08lx > 0x%08lx)\n" - "disabling initrd\n", - INITRD_START + INITRD_SIZE, - low_top_pfn << PAGE_SHIFT); - initrd_start = 0; - } - } -#endif - -} /* end setup_linux_memory() */ -#endif - -/*****************************************************************************/ -/* - * set up the memory map for uClinux - */ -#ifndef CONFIG_MMU -static void __init setup_uclinux_memory(void) -{ -#ifdef CONFIG_PROTECT_KERNEL - unsigned long dampr; -#endif - unsigned long kend; - int bootmap_size; - - kend = (unsigned long) &__kernel_image_end; - kend = (kend + PAGE_SIZE - 1) & PAGE_MASK; - - /* give all the memory to the bootmap allocator, tell it to put the - * boot mem_map immediately following the kernel image - */ - bootmap_size = init_bootmem_node(NODE_DATA(0), - kend >> PAGE_SHIFT, /* map addr */ - memory_start >> PAGE_SHIFT, /* start of RAM */ - memory_end >> PAGE_SHIFT /* end of RAM */ - ); - - /* free all the usable memory */ - free_bootmem(memory_start, memory_end - memory_start); - - high_memory = (void *) (memory_end & PAGE_MASK); - max_mapnr = ((unsigned long) high_memory - PAGE_OFFSET) >> PAGE_SHIFT; - - min_low_pfn = memory_start >> PAGE_SHIFT; - max_low_pfn = memory_end >> PAGE_SHIFT; - max_pfn = max_low_pfn; - - /* now take back the bits the core kernel is occupying */ -#ifndef CONFIG_PROTECT_KERNEL - reserve_bootmem(kend, bootmap_size, BOOTMEM_DEFAULT); - reserve_bootmem((unsigned long) &__kernel_image_start, - kend - (unsigned long) &__kernel_image_start, - BOOTMEM_DEFAULT); - -#else - dampr = __get_DAMPR(0); - dampr &= xAMPRx_SS; - dampr = (dampr >> 4) + 17; - dampr = 1 << dampr; - - reserve_bootmem(__get_DAMPR(0) & xAMPRx_PPFN, dampr, BOOTMEM_DEFAULT); -#endif - - /* reserve some memory to do uncached DMA through if requested */ -#ifdef CONFIG_RESERVE_DMA_COHERENT - if (dma_coherent_mem_start) - reserve_bootmem(dma_coherent_mem_start, - dma_coherent_mem_end - dma_coherent_mem_start, - BOOTMEM_DEFAULT); -#endif - -} /* end setup_uclinux_memory() */ -#endif - -/*****************************************************************************/ -/* - * get CPU information for use by procfs - */ -static int show_cpuinfo(struct seq_file *m, void *v) -{ - const char *gr, *fr, *fm, *fp, *cm, *nem, *ble; -#ifdef CONFIG_PM - const char *sep; -#endif - - gr = cpu_hsr0_all & HSR0_GRHE ? "gr0-63" : "gr0-31"; - fr = cpu_hsr0_all & HSR0_FRHE ? "fr0-63" : "fr0-31"; - fm = cpu_psr_all & PSR_EM ? ", Media" : ""; - fp = cpu_psr_all & PSR_EF ? ", FPU" : ""; - cm = cpu_psr_all & PSR_CM ? ", CCCR" : ""; - nem = cpu_psr_all & PSR_NEM ? ", NE" : ""; - ble = cpu_psr_all & PSR_BE ? "BE" : "LE"; - - seq_printf(m, - "CPU-Series:\t%s\n" - "CPU-Core:\t%s, %s, %s%s%s\n" - "CPU:\t\t%s\n" - "MMU:\t\t%s\n" - "FP-Media:\t%s%s%s\n" - "System:\t\t%s", - cpu_series, - cpu_core, gr, ble, cm, nem, - cpu_silicon, - cpu_mmu, - fr, fm, fp, - cpu_system); - - if (cpu_board1) - seq_printf(m, ", %s", cpu_board1); - - if (cpu_board2) - seq_printf(m, ", %s", cpu_board2); - - seq_printf(m, "\n"); - -#ifdef CONFIG_PM - seq_printf(m, "PM-Controls:"); - sep = "\t"; - - if (clock_bits_settable & CLOCK_BIT_CMODE) { - seq_printf(m, "%scmode=0x%04hx", sep, clock_cmodes_permitted); - sep = ", "; - } - - if (clock_bits_settable & CLOCK_BIT_CM) { - seq_printf(m, "%scm=0x%lx", sep, clock_bits_settable & CLOCK_BIT_CM); - sep = ", "; - } - - if (clock_bits_settable & CLOCK_BIT_P0) { - seq_printf(m, "%sp0=0x3", sep); - sep = ", "; - } - - seq_printf(m, "%ssuspend=0x22\n", sep); -#endif - - seq_printf(m, - "PM-Status:\tcmode=%d, cm=%d, p0=%d\n", - clock_cmode_current, clock_cm_current, clock_p0_current); - -#define print_clk(TAG, VAR) \ - seq_printf(m, "Clock-" TAG ":\t%lu.%2.2lu MHz\n", VAR / 1000000, (VAR / 10000) % 100) - - print_clk("In", __clkin_clock_speed_HZ); - print_clk("Core", __core_clock_speed_HZ); - print_clk("SDRAM", __sdram_clock_speed_HZ); - print_clk("CBus", __core_bus_clock_speed_HZ); - print_clk("Res", __res_bus_clock_speed_HZ); - print_clk("Ext", __ext_bus_clock_speed_HZ); - print_clk("DSU", __dsu_clock_speed_HZ); - - seq_printf(m, - "BogoMips:\t%lu.%02lu\n", - (loops_per_jiffy * HZ) / 500000, ((loops_per_jiffy * HZ) / 5000) % 100); - - return 0; -} /* end show_cpuinfo() */ - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return *pos < NR_CPUS ? (void *) 0x12345678 : NULL; -} - -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} - -static void c_stop(struct seq_file *m, void *v) -{ -} - -const struct seq_operations cpuinfo_op = { - .start = c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; - -void arch_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ - *year = *mon = *day = *hour = *min = *sec = 0; -} - -/*****************************************************************************/ -/* - * - */ -#ifdef CONFIG_MB93090_MB00 -static void __init mb93090_sendlcdcmd(uint32_t cmd) -{ - unsigned long base = __addr_LCD(); - int loop; - - /* request reading of the busy flag */ - __set_LCD(base, LCD_CMD_READ_BUSY); - __set_LCD(base, LCD_CMD_READ_BUSY & ~LCD_E); - - /* wait for the busy flag to become clear */ - for (loop = 10000; loop > 0; loop--) - if (!(__get_LCD(base) & 0x80)) - break; - - /* send the command */ - __set_LCD(base, cmd); - __set_LCD(base, cmd & ~LCD_E); - -} /* end mb93090_sendlcdcmd() */ - -/*****************************************************************************/ -/* - * write to the MB93090 LEDs and LCD - */ -static void __init mb93090_display(void) -{ - const char *p; - - __set_LEDS(0); - - /* set up the LCD */ - mb93090_sendlcdcmd(LCD_CMD_CLEAR); - mb93090_sendlcdcmd(LCD_CMD_FUNCSET(1,1,0)); - mb93090_sendlcdcmd(LCD_CMD_ON(0,0)); - mb93090_sendlcdcmd(LCD_CMD_HOME); - - mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(0)); - for (p = mb93090_banner; *p; p++) - mb93090_sendlcdcmd(LCD_DATA_WRITE(*p)); - - mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(64)); - for (p = mb93090_version; *p; p++) - mb93090_sendlcdcmd(LCD_DATA_WRITE(*p)); - -} /* end mb93090_display() */ - -#endif // CONFIG_MB93090_MB00 diff --git a/arch/frv/kernel/signal.c b/arch/frv/kernel/signal.c deleted file mode 100644 index bf6e07a7a1b1..000000000000 --- a/arch/frv/kernel/signal.c +++ /dev/null @@ -1,426 +0,0 @@ -/* signal.c: FRV specific bits of signal handling - * - * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/m68k/kernel/signal.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/kernel.h> -#include <linux/signal.h> -#include <linux/errno.h> -#include <linux/wait.h> -#include <linux/ptrace.h> -#include <linux/unistd.h> -#include <linux/personality.h> -#include <linux/tracehook.h> -#include <asm/ucontext.h> -#include <linux/uaccess.h> -#include <asm/cacheflush.h> - -#define DEBUG_SIG 0 - -struct fdpic_func_descriptor { - unsigned long text; - unsigned long GOT; -}; - -/* - * Do a signal return; undo the signal stack. - */ - -struct sigframe -{ - __sigrestore_t pretcode; - int sig; - struct sigcontext sc; - unsigned long extramask[_NSIG_WORDS-1]; - uint32_t retcode[2]; -}; - -struct rt_sigframe -{ - __sigrestore_t pretcode; - int sig; - struct siginfo __user *pinfo; - void __user *puc; - struct siginfo info; - struct ucontext uc; - uint32_t retcode[2]; -}; - -static int restore_sigcontext(struct sigcontext __user *sc, int *_gr8) -{ - struct user_context *user = current->thread.user; - unsigned long tbr, psr; - - /* Always make any pending restarted system calls return -EINTR */ - current->restart_block.fn = do_no_restart_syscall; - - tbr = user->i.tbr; - psr = user->i.psr; - if (copy_from_user(user, &sc->sc_context, sizeof(sc->sc_context))) - goto badframe; - user->i.tbr = tbr; - user->i.psr = psr; - - restore_user_regs(user); - - user->i.syscallno = -1; /* disable syscall checks */ - - *_gr8 = user->i.gr[8]; - return 0; - - badframe: - return 1; -} - -asmlinkage int sys_sigreturn(void) -{ - struct sigframe __user *frame = (struct sigframe __user *) __frame->sp; - sigset_t set; - int gr8; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - if (__get_user(set.sig[0], &frame->sc.sc_oldmask)) - goto badframe; - - if (_NSIG_WORDS > 1 && - __copy_from_user(&set.sig[1], &frame->extramask, sizeof(frame->extramask))) - goto badframe; - - set_current_blocked(&set); - - if (restore_sigcontext(&frame->sc, &gr8)) - goto badframe; - return gr8; - - badframe: - force_sig(SIGSEGV, current); - return 0; -} - -asmlinkage int sys_rt_sigreturn(void) -{ - struct rt_sigframe __user *frame = (struct rt_sigframe __user *) __frame->sp; - sigset_t set; - int gr8; - - if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) - goto badframe; - if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) - goto badframe; - - set_current_blocked(&set); - - if (restore_sigcontext(&frame->uc.uc_mcontext, &gr8)) - goto badframe; - - if (restore_altstack(&frame->uc.uc_stack)) - goto badframe; - - return gr8; - -badframe: - force_sig(SIGSEGV, current); - return 0; -} - -/* - * Set up a signal frame - */ -static int setup_sigcontext(struct sigcontext __user *sc, unsigned long mask) -{ - save_user_regs(current->thread.user); - - if (copy_to_user(&sc->sc_context, current->thread.user, sizeof(sc->sc_context)) != 0) - goto badframe; - - /* non-iBCS2 extensions.. */ - if (__put_user(mask, &sc->sc_oldmask) < 0) - goto badframe; - - return 0; - - badframe: - return 1; -} - -/*****************************************************************************/ -/* - * Determine which stack to use.. - */ -static inline void __user *get_sigframe(struct ksignal *ksig, - size_t frame_size) -{ - unsigned long sp = sigsp(__frame->sp, ksig); - - return (void __user *) ((sp - frame_size) & ~7UL); - -} /* end get_sigframe() */ - -/*****************************************************************************/ -/* - * - */ -static int setup_frame(struct ksignal *ksig, sigset_t *set) -{ - struct sigframe __user *frame; - int sig = ksig->sig; - - frame = get_sigframe(ksig, sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - return -EFAULT; - - if (__put_user(sig, &frame->sig) < 0) - return -EFAULT; - - if (setup_sigcontext(&frame->sc, set->sig[0])) - return -EFAULT; - - if (_NSIG_WORDS > 1) { - if (__copy_to_user(frame->extramask, &set->sig[1], - sizeof(frame->extramask))) - return -EFAULT; - } - - /* Set up to return from userspace. If provided, use a stub - * already in userspace. */ - if (ksig->ka.sa.sa_flags & SA_RESTORER) { - if (__put_user(ksig->ka.sa.sa_restorer, &frame->pretcode) < 0) - return -EFAULT; - } - else { - /* Set up the following code on the stack: - * setlos #__NR_sigreturn,gr7 - * tira gr0,0 - */ - if (__put_user((__sigrestore_t)frame->retcode, &frame->pretcode) || - __put_user(0x8efc0000|__NR_sigreturn, &frame->retcode[0]) || - __put_user(0xc0700000, &frame->retcode[1])) - return -EFAULT; - - flush_icache_range((unsigned long) frame->retcode, - (unsigned long) (frame->retcode + 2)); - } - - /* Set up registers for the signal handler */ - if (current->personality & FDPIC_FUNCPTRS) { - struct fdpic_func_descriptor __user *funcptr = - (struct fdpic_func_descriptor __user *) ksig->ka.sa.sa_handler; - struct fdpic_func_descriptor desc; - if (copy_from_user(&desc, funcptr, sizeof(desc))) - return -EFAULT; - __frame->pc = desc.text; - __frame->gr15 = desc.GOT; - } else { - __frame->pc = (unsigned long) ksig->ka.sa.sa_handler; - __frame->gr15 = 0; - } - - __frame->sp = (unsigned long) frame; - __frame->lr = (unsigned long) &frame->retcode; - __frame->gr8 = sig; - -#if DEBUG_SIG - printk("SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n", - sig, current->comm, current->pid, frame, __frame->pc, - frame->pretcode); -#endif - - return 0; -} /* end setup_frame() */ - -/*****************************************************************************/ -/* - * - */ -static int setup_rt_frame(struct ksignal *ksig, sigset_t *set) -{ - struct rt_sigframe __user *frame; - int sig = ksig->sig; - - frame = get_sigframe(ksig, sizeof(*frame)); - - if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) - return -EFAULT; - - if (__put_user(sig, &frame->sig) || - __put_user(&frame->info, &frame->pinfo) || - __put_user(&frame->uc, &frame->puc)) - return -EFAULT; - - if (copy_siginfo_to_user(&frame->info, &ksig->info)) - return -EFAULT; - - /* Create the ucontext. */ - if (__put_user(0, &frame->uc.uc_flags) || - __put_user(NULL, &frame->uc.uc_link) || - __save_altstack(&frame->uc.uc_stack, __frame->sp)) - return -EFAULT; - - if (setup_sigcontext(&frame->uc.uc_mcontext, set->sig[0])) - return -EFAULT; - - if (__copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set))) - return -EFAULT; - - /* Set up to return from userspace. If provided, use a stub - * already in userspace. */ - if (ksig->ka.sa.sa_flags & SA_RESTORER) { - if (__put_user(ksig->ka.sa.sa_restorer, &frame->pretcode)) - return -EFAULT; - } - else { - /* Set up the following code on the stack: - * setlos #__NR_sigreturn,gr7 - * tira gr0,0 - */ - if (__put_user((__sigrestore_t)frame->retcode, &frame->pretcode) || - __put_user(0x8efc0000|__NR_rt_sigreturn, &frame->retcode[0]) || - __put_user(0xc0700000, &frame->retcode[1])) - return -EFAULT; - - flush_icache_range((unsigned long) frame->retcode, - (unsigned long) (frame->retcode + 2)); - } - - /* Set up registers for signal handler */ - if (current->personality & FDPIC_FUNCPTRS) { - struct fdpic_func_descriptor __user *funcptr = - (struct fdpic_func_descriptor __user *) ksig->ka.sa.sa_handler; - struct fdpic_func_descriptor desc; - if (copy_from_user(&desc, funcptr, sizeof(desc))) - return -EFAULT; - __frame->pc = desc.text; - __frame->gr15 = desc.GOT; - } else { - __frame->pc = (unsigned long) ksig->ka.sa.sa_handler; - __frame->gr15 = 0; - } - - __frame->sp = (unsigned long) frame; - __frame->lr = (unsigned long) &frame->retcode; - __frame->gr8 = sig; - __frame->gr9 = (unsigned long) &frame->info; - -#if DEBUG_SIG - printk("SIG deliver %d (%s:%d): sp=%p pc=%lx ra=%p\n", - sig, current->comm, current->pid, frame, __frame->pc, - frame->pretcode); -#endif - return 0; - -} /* end setup_rt_frame() */ - -/*****************************************************************************/ -/* - * OK, we're invoking a handler - */ -static void handle_signal(struct ksignal *ksig) -{ - sigset_t *oldset = sigmask_to_save(); - int ret; - - /* Are we from a system call? */ - if (__frame->syscallno != -1) { - /* If so, check system call restarting.. */ - switch (__frame->gr8) { - case -ERESTART_RESTARTBLOCK: - case -ERESTARTNOHAND: - __frame->gr8 = -EINTR; - break; - - case -ERESTARTSYS: - if (!(ksig->ka.sa.sa_flags & SA_RESTART)) { - __frame->gr8 = -EINTR; - break; - } - - /* fallthrough */ - case -ERESTARTNOINTR: - __frame->gr8 = __frame->orig_gr8; - __frame->pc -= 4; - } - __frame->syscallno = -1; - } - - /* Set up the stack frame */ - if (ksig->ka.sa.sa_flags & SA_SIGINFO) - ret = setup_rt_frame(ksig, oldset); - else - ret = setup_frame(ksig, oldset); - - signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); -} /* end handle_signal() */ - -/*****************************************************************************/ -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - */ -static void do_signal(void) -{ - struct ksignal ksig; - - if (get_signal(&ksig)) { - handle_signal(&ksig); - return; - } - - /* Did we come from a system call? */ - if (__frame->syscallno != -1) { - /* Restart the system call - no handlers present */ - switch (__frame->gr8) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - __frame->gr8 = __frame->orig_gr8; - __frame->pc -= 4; - break; - - case -ERESTART_RESTARTBLOCK: - __frame->gr7 = __NR_restart_syscall; - __frame->pc -= 4; - break; - } - __frame->syscallno = -1; - } - - /* if there's no signal to deliver, we just put the saved sigmask - * back */ - restore_saved_sigmask(); -} /* end do_signal() */ - -/*****************************************************************************/ -/* - * notification of userspace execution resumption - * - triggered by the TIF_WORK_MASK flags - */ -asmlinkage void do_notify_resume(__u32 thread_info_flags) -{ - /* pending single-step? */ - if (thread_info_flags & _TIF_SINGLESTEP) - clear_thread_flag(TIF_SINGLESTEP); - - /* deal with pending signal delivery */ - if (thread_info_flags & _TIF_SIGPENDING) - do_signal(); - - /* deal with notification on about to resume userspace execution */ - if (thread_info_flags & _TIF_NOTIFY_RESUME) { - clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(__frame); - } - -} /* end do_notify_resume() */ diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S deleted file mode 100644 index f67bf73cd2cc..000000000000 --- a/arch/frv/kernel/sleep.S +++ /dev/null @@ -1,373 +0,0 @@ -/* sleep.S: power saving mode entry - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@infradead.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/sys.h> -#include <linux/linkage.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/ptrace.h> -#include <asm/errno.h> -#include <asm/cache.h> -#include <asm/spr-regs.h> - -#define __addr_MASK 0xfeff9820 /* interrupt controller mask */ - -#define __addr_FR55X_DRCN 0xfeff0218 /* Address of DRCN register */ -#define FR55X_DSTS_OFFSET -4 /* Offset from DRCN to DSTS */ -#define FR55X_SDRAMC_DSTS_SSI 0x00000002 /* indicates that the SDRAM is in self-refresh mode */ - -#define __addr_FR4XX_DRCN 0xfe000430 /* Address of DRCN register */ -#define FR4XX_DSTS_OFFSET -8 /* Offset from DRCN to DSTS */ -#define FR4XX_SDRAMC_DSTS_SSI 0x00000001 /* indicates that the SDRAM is in self-refresh mode */ - -#define SDRAMC_DRCN_SR 0x00000001 /* transition SDRAM into self-refresh mode */ - - .section .bss - .balign 8 - .globl __sleep_save_area -__sleep_save_area: - .space 16 - - - .text - .balign 4 - -.macro li v r - sethi.p %hi(\v),\r - setlo %lo(\v),\r -.endm - -#ifdef CONFIG_PM -############################################################################### -# -# CPU suspension routine -# - void frv_cpu_suspend(unsigned long pdm_mode) -# -############################################################################### - .globl frv_cpu_suspend - .type frv_cpu_suspend,@function -frv_cpu_suspend: - - #---------------------------------------------------- - # save hsr0, psr, isr, and lr for resume code - #---------------------------------------------------- - li __sleep_save_area,gr11 - - movsg hsr0,gr4 - movsg psr,gr5 - movsg isr,gr6 - movsg lr,gr7 - stdi gr4,@(gr11,#0) - stdi gr6,@(gr11,#8) - - # store the return address from sleep in GR14, and its complement in GR13 as a check - li __ramboot_resume,gr14 -#ifdef CONFIG_MMU - # Resume via RAMBOOT# will turn MMU off, so bootloader needs a physical address. - sethi.p %hi(__page_offset),gr13 - setlo %lo(__page_offset),gr13 - sub gr14,gr13,gr14 -#endif - not gr14,gr13 - - #---------------------------------------------------- - # preload and lock into icache that code which may have to run - # when dram is in self-refresh state. - #---------------------------------------------------- - movsg hsr0, gr3 - li HSR0_ICE,gr4 - or gr3,gr4,gr3 - movgs gr3,hsr0 - or gr3,gr8,gr7 // add the sleep bits for later - - li #__icache_lock_start,gr3 - li #__icache_lock_end,gr4 -1: icpl gr3,gr0,#1 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - # disable exceptions - movsg psr,gr8 - andi.p gr8,#~PSR_PIL,gr8 - andi gr8,~PSR_ET,gr8 - movgs gr8,psr - ori gr8,#PSR_ET,gr8 - - srli gr8,#28,gr4 - subicc gr4,#3,gr0,icc0 - beq icc0,#0,1f - # FR4xx - li __addr_FR4XX_DRCN,gr4 - li FR4XX_SDRAMC_DSTS_SSI,gr5 - li FR4XX_DSTS_OFFSET,gr6 - bra __icache_lock_start -1: - # FR5xx - li __addr_FR55X_DRCN,gr4 - li FR55X_SDRAMC_DSTS_SSI,gr5 - li FR55X_DSTS_OFFSET,gr6 - bra __icache_lock_start - - .size frv_cpu_suspend, .-frv_cpu_suspend - -# -# the final part of the sleep sequence... -# - we want it to be be cacheline aligned so we can lock it into the icache easily -# On entry: gr7 holds desired hsr0 sleep value -# gr8 holds desired psr sleep value -# - .balign L1_CACHE_BYTES - .type __icache_lock_start,@function -__icache_lock_start: - - #---------------------------------------------------- - # put SDRAM in self-refresh mode - #---------------------------------------------------- - - # Flush all data in the cache using the DCEF instruction. - dcef @(gr0,gr0),#1 - - # Stop DMAC transfer - - # Execute dummy load from SDRAM - ldi @(gr11,#0),gr11 - - # put the SDRAM into self-refresh mode - ld @(gr4,gr0),gr11 - ori gr11,#SDRAMC_DRCN_SR,gr11 - st gr11,@(gr4,gr0) - membar - - # wait for SDRAM to reach self-refresh mode -1: ld @(gr4,gr6),gr11 - andcc gr11,gr5,gr11,icc0 - beq icc0,#0,1b - - # Set the GPIO register so that the IRQ[3:0] pins become valid, as required. - # Set the clock mode (CLKC register) as required. - # - At this time, also set the CLKC register P0 bit. - - # Set the HSR0 register PDM field. - movgs gr7,hsr0 - - # Execute NOP 32 times. - .rept 32 - nop - .endr - -#if 0 // Fujitsu recommend to skip this and will update docs. - # Release the interrupt mask setting of the MASK register of the - # interrupt controller if necessary. - sti gr10,@(gr9,#0) - membar -#endif - - # Set the PSR register ET bit to 1 to enable interrupts. - movgs gr8,psr - - ################################################### - # this is only reached if waking up via interrupt - ################################################### - - # Execute NOP 32 times. - .rept 32 - nop - .endr - - #---------------------------------------------------- - # wake SDRAM from self-refresh mode - #---------------------------------------------------- - ld @(gr4,gr0),gr11 - andi gr11,#~SDRAMC_DRCN_SR,gr11 - st gr11,@(gr4,gr0) - membar -2: - ld @(gr4,gr6),gr11 // Wait for it to come back... - andcc gr11,gr5,gr0,icc0 - bne icc0,0,2b - - # wait for the SDRAM to stabilise - li 0x0100000,gr3 -3: subicc gr3,#1,gr3,icc0 - bne icc0,#0,3b - - # now that DRAM is back, this is the end of the code which gets - # locked in icache. -__icache_lock_end: - .size __icache_lock_start, .-__icache_lock_start - - # Fall-through to the RAMBOOT# wakeup path - -############################################################################### -# -# resume from suspend re-entry point reached via RAMBOOT# and bootloader -# -############################################################################### -__ramboot_resume: - - #---------------------------------------------------- - # restore hsr0, psr, isr, and leave saved lr in gr7 - #---------------------------------------------------- - li __sleep_save_area,gr11 -#ifdef CONFIG_MMU - movsg hsr0,gr4 - sethi.p %hi(HSR0_EXMMU),gr3 - setlo %lo(HSR0_EXMMU),gr3 - andcc gr3,gr4,gr0,icc0 - bne icc0,#0,2f - - # need to use physical address - sethi.p %hi(__page_offset),gr3 - setlo %lo(__page_offset),gr3 - sub gr11,gr3,gr11 - - # flush all tlb entries - setlos #64,gr4 - setlos.p #PAGE_SIZE,gr5 - setlos #0,gr6 -1: - tlbpr gr6,gr0,#6,#0 - subicc.p gr4,#1,gr4,icc0 - add gr6,gr5,gr6 - bne icc0,#2,1b - - # need a temporary mapping for the current physical address we are - # using between time MMU is enabled and jump to virtual address is - # made. - sethi.p %hi(0x00000000),gr4 - setlo %lo(0x00000000),gr4 ; physical address - setlos #xAMPRx_L|xAMPRx_M|xAMPRx_SS_256Mb|xAMPRx_S_KERNEL|xAMPRx_V,gr5 - or gr4,gr5,gr5 - - movsg cxnr,gr13 - or gr4,gr13,gr4 - - movgs gr4,iamlr1 ; mapped from real address 0 - movgs gr5,iampr1 ; cached kernel memory at 0x00000000 -2: -#endif - - lddi @(gr11,#0),gr4 ; hsr0, psr - lddi @(gr11,#8),gr6 ; isr, lr - movgs gr4,hsr0 - bar - -#ifdef CONFIG_MMU - sethi.p %hi(1f),gr11 - setlo %lo(1f),gr11 - jmpl @(gr11,gr0) -1: - movgs gr0,iampr1 ; get rid of temporary mapping -#endif - movgs gr5,psr - movgs gr6,isr - - #---------------------------------------------------- - # unlock the icache which was locked before going to sleep - #---------------------------------------------------- - li __icache_lock_start,gr3 - li __icache_lock_end,gr4 -1: icul gr3 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - #---------------------------------------------------- - # back to business as usual - #---------------------------------------------------- - jmpl @(gr7,gr0) ; - -#endif /* CONFIG_PM */ - -############################################################################### -# -# CPU core sleep mode routine -# -############################################################################### - .globl frv_cpu_core_sleep - .type frv_cpu_core_sleep,@function -frv_cpu_core_sleep: - - # Preload into icache. - li #__core_sleep_icache_lock_start,gr3 - li #__core_sleep_icache_lock_end,gr4 - -1: icpl gr3,gr0,#1 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - bra __core_sleep_icache_lock_start - - .balign L1_CACHE_BYTES -__core_sleep_icache_lock_start: - - # (1) Set the PSR register ET bit to 0 to disable interrupts. - movsg psr,gr8 - andi.p gr8,#~(PSR_PIL),gr8 - andi gr8,#~(PSR_ET),gr4 - movgs gr4,psr - -#if 0 // Fujitsu recommend to skip this and will update docs. - # (2) Set '1' to all bits in the MASK register of the interrupt - # controller and mask interrupts. - sethi.p %hi(__addr_MASK),gr9 - setlo %lo(__addr_MASK),gr9 - sethi.p %hi(0xffff0000),gr4 - setlo %lo(0xffff0000),gr4 - ldi @(gr9,#0),gr10 - sti gr4,@(gr9,#0) -#endif - # (3) Flush all data in the cache using the DCEF instruction. - dcef @(gr0,gr0),#1 - - # (4) Execute the memory barrier instruction - membar - - # (5) Set the GPIO register so that the IRQ[3:0] pins become valid, as required. - # (6) Set the clock mode (CLKC register) as required. - # - At this time, also set the CLKC register P0 bit. - # (7) Set the HSR0 register PDM field to 001 . - movsg hsr0,gr4 - ori gr4,HSR0_PDM_CORE_SLEEP,gr4 - movgs gr4,hsr0 - - # (8) Execute NOP 32 times. - .rept 32 - nop - .endr - -#if 0 // Fujitsu recommend to skip this and will update docs. - # (9) Release the interrupt mask setting of the MASK register of the - # interrupt controller if necessary. - sti gr10,@(gr9,#0) - membar -#endif - - # (10) Set the PSR register ET bit to 1 to enable interrupts. - movgs gr8,psr - -__core_sleep_icache_lock_end: - - # Unlock from icache - li __core_sleep_icache_lock_start,gr3 - li __core_sleep_icache_lock_end,gr4 -1: icul gr3 - addi gr3,#L1_CACHE_BYTES,gr3 - cmp gr4,gr3,icc0 - bhi icc0,#0,1b - - bralr - - .size frv_cpu_core_sleep, .-frv_cpu_core_sleep diff --git a/arch/frv/kernel/switch_to.S b/arch/frv/kernel/switch_to.S deleted file mode 100644 index b06668670fcc..000000000000 --- a/arch/frv/kernel/switch_to.S +++ /dev/null @@ -1,489 +0,0 @@ -############################################################################### -# -# switch_to.S: context switch operation -# -# Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. -# Written by David Howells (dhowells@redhat.com) -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License -# as published by the Free Software Foundation; either version -# 2 of the License, or (at your option) any later version. -# -############################################################################### - -#include <linux/linkage.h> -#include <asm/thread_info.h> -#include <asm/processor.h> -#include <asm/registers.h> -#include <asm/spr-regs.h> - -.macro LEDS val - setlos #~\val,gr27 - st gr27,@(gr30,gr0) - membar - dcf @(gr30,gr0) -.endm - - .section .sdata - .balign 8 - - # address of frame 0 (userspace) on current kernel stack - .globl __kernel_frame0_ptr -__kernel_frame0_ptr: - .long init_thread_union + THREAD_SIZE - FRV_FRAME0_SIZE - - # address of current task - .globl __kernel_current_task -__kernel_current_task: - .long init_task - - .section .text - .balign 4 - -############################################################################### -# -# struct task_struct *__switch_to(struct thread_struct *prev_thread, -# struct thread_struct *next_thread, -# struct task_struct *prev) -# -############################################################################### - .globl __switch_to -__switch_to: - # save outgoing process's context - sethi.p %hi(__switch_back),gr13 - setlo %lo(__switch_back),gr13 - movsg lr,gr12 - - stdi gr28,@(gr8,#__THREAD_FRAME) - sti sp ,@(gr8,#__THREAD_SP) - sti fp ,@(gr8,#__THREAD_FP) - stdi gr12,@(gr8,#__THREAD_LR) - stdi gr16,@(gr8,#__THREAD_GR(16)) - stdi gr18,@(gr8,#__THREAD_GR(18)) - stdi gr20,@(gr8,#__THREAD_GR(20)) - stdi gr22,@(gr8,#__THREAD_GR(22)) - stdi gr24,@(gr8,#__THREAD_GR(24)) - stdi.p gr26,@(gr8,#__THREAD_GR(26)) - - or gr8,gr8,gr22 - ldi.p @(gr8,#__THREAD_USER),gr8 - call save_user_regs - or gr22,gr22,gr8 - - # retrieve the new context - sethi.p %hi(__kernel_frame0_ptr),gr6 - setlo %lo(__kernel_frame0_ptr),gr6 - movsg psr,gr4 - - lddi.p @(gr9,#__THREAD_FRAME),gr10 - or gr10,gr10,gr27 ; save prev for the return value - - ldi @(gr11,#4),gr19 ; get new_current->thread_info - - lddi @(gr9,#__THREAD_SP),gr12 - ldi @(gr9,#__THREAD_LR),gr14 - ldi @(gr9,#__THREAD_PC),gr18 - ldi.p @(gr9,#__THREAD_FRAME0),gr7 - - # actually switch kernel contexts with ordinary exceptions disabled - andi gr4,#~PSR_ET,gr5 - movgs gr5,psr - - or.p gr10,gr0,gr28 ; set __frame - or gr11,gr0,gr29 ; set __current - or.p gr12,gr0,sp - or gr13,gr0,fp - or gr19,gr0,gr15 ; set __current_thread_info - - sti gr7,@(gr6,#0) ; set __kernel_frame0_ptr - sti gr29,@(gr6,#4) ; set __kernel_current_task - - movgs gr14,lr - bar - - # jump to __switch_back or ret_from_fork as appropriate - # - move prev to GR8 - movgs gr4,psr - jmpl.p @(gr18,gr0) - or gr27,gr27,gr8 - -############################################################################### -# -# restore incoming process's context -# - on entry: -# - SP, FP, LR, GR15, GR28 and GR29 will have been set up appropriately -# - GR8 will point to the outgoing task_struct -# - GR9 will point to the incoming thread_struct -# -############################################################################### -__switch_back: - lddi @(gr9,#__THREAD_GR(16)),gr16 - lddi @(gr9,#__THREAD_GR(18)),gr18 - lddi @(gr9,#__THREAD_GR(20)),gr20 - lddi @(gr9,#__THREAD_GR(22)),gr22 - lddi @(gr9,#__THREAD_GR(24)),gr24 - lddi @(gr9,#__THREAD_GR(26)),gr26 - - # fall through into restore_user_regs() - ldi.p @(gr9,#__THREAD_USER),gr8 - or gr8,gr8,gr9 - -############################################################################### -# -# restore extra general regs and FP/Media regs -# - void *restore_user_regs(const struct user_context *target, void *retval) -# - on entry: -# - GR8 will point to the user context to swap in -# - GR9 will contain the value to be returned in GR8 (prev task on context switch) -# -############################################################################### - .globl restore_user_regs -restore_user_regs: - movsg hsr0,gr6 - ori gr6,#HSR0_GRHE|HSR0_FRLE|HSR0_FRHE,gr6 - movgs gr6,hsr0 - movsg hsr0,gr6 - - movsg psr,gr7 - ori gr7,#PSR_EF|PSR_EM,gr7 - movgs gr7,psr - movsg psr,gr7 - srli gr7,#24,gr7 - bar - - lddi @(gr8,#__FPMEDIA_MSR(0)),gr4 - - movgs gr4,msr0 - movgs gr5,msr1 - - lddfi @(gr8,#__FPMEDIA_ACC(0)),fr16 - lddfi @(gr8,#__FPMEDIA_ACC(2)),fr18 - ldbfi @(gr8,#__FPMEDIA_ACCG(0)),fr20 - ldbfi @(gr8,#__FPMEDIA_ACCG(1)),fr21 - ldbfi @(gr8,#__FPMEDIA_ACCG(2)),fr22 - ldbfi @(gr8,#__FPMEDIA_ACCG(3)),fr23 - - mwtacc fr16,acc0 - mwtacc fr17,acc1 - mwtacc fr18,acc2 - mwtacc fr19,acc3 - mwtaccg fr20,accg0 - mwtaccg fr21,accg1 - mwtaccg fr22,accg2 - mwtaccg fr23,accg3 - - # some CPUs have extra ACCx and ACCGx regs and maybe FSRx regs - subicc.p gr7,#0x50,gr0,icc0 - subicc gr7,#0x31,gr0,icc1 - beq icc0,#0,__restore_acc_fr451 - beq icc1,#0,__restore_acc_fr555 -__restore_acc_cont: - - # some CPU's have GR32-GR63 - setlos #HSR0_FRHE,gr4 - andcc gr6,gr4,gr0,icc0 - beq icc0,#1,__restore_skip_gr32_gr63 - - lddi @(gr8,#__INT_GR(32)),gr32 - lddi @(gr8,#__INT_GR(34)),gr34 - lddi @(gr8,#__INT_GR(36)),gr36 - lddi @(gr8,#__INT_GR(38)),gr38 - lddi @(gr8,#__INT_GR(40)),gr40 - lddi @(gr8,#__INT_GR(42)),gr42 - lddi @(gr8,#__INT_GR(44)),gr44 - lddi @(gr8,#__INT_GR(46)),gr46 - lddi @(gr8,#__INT_GR(48)),gr48 - lddi @(gr8,#__INT_GR(50)),gr50 - lddi @(gr8,#__INT_GR(52)),gr52 - lddi @(gr8,#__INT_GR(54)),gr54 - lddi @(gr8,#__INT_GR(56)),gr56 - lddi @(gr8,#__INT_GR(58)),gr58 - lddi @(gr8,#__INT_GR(60)),gr60 - lddi @(gr8,#__INT_GR(62)),gr62 -__restore_skip_gr32_gr63: - - # all CPU's have FR0-FR31 - lddfi @(gr8,#__FPMEDIA_FR( 0)),fr0 - lddfi @(gr8,#__FPMEDIA_FR( 2)),fr2 - lddfi @(gr8,#__FPMEDIA_FR( 4)),fr4 - lddfi @(gr8,#__FPMEDIA_FR( 6)),fr6 - lddfi @(gr8,#__FPMEDIA_FR( 8)),fr8 - lddfi @(gr8,#__FPMEDIA_FR(10)),fr10 - lddfi @(gr8,#__FPMEDIA_FR(12)),fr12 - lddfi @(gr8,#__FPMEDIA_FR(14)),fr14 - lddfi @(gr8,#__FPMEDIA_FR(16)),fr16 - lddfi @(gr8,#__FPMEDIA_FR(18)),fr18 - lddfi @(gr8,#__FPMEDIA_FR(20)),fr20 - lddfi @(gr8,#__FPMEDIA_FR(22)),fr22 - lddfi @(gr8,#__FPMEDIA_FR(24)),fr24 - lddfi @(gr8,#__FPMEDIA_FR(26)),fr26 - lddfi @(gr8,#__FPMEDIA_FR(28)),fr28 - lddfi.p @(gr8,#__FPMEDIA_FR(30)),fr30 - - # some CPU's have FR32-FR63 - setlos #HSR0_FRHE,gr4 - andcc gr6,gr4,gr0,icc0 - beq icc0,#1,__restore_skip_fr32_fr63 - - lddfi @(gr8,#__FPMEDIA_FR(32)),fr32 - lddfi @(gr8,#__FPMEDIA_FR(34)),fr34 - lddfi @(gr8,#__FPMEDIA_FR(36)),fr36 - lddfi @(gr8,#__FPMEDIA_FR(38)),fr38 - lddfi @(gr8,#__FPMEDIA_FR(40)),fr40 - lddfi @(gr8,#__FPMEDIA_FR(42)),fr42 - lddfi @(gr8,#__FPMEDIA_FR(44)),fr44 - lddfi @(gr8,#__FPMEDIA_FR(46)),fr46 - lddfi @(gr8,#__FPMEDIA_FR(48)),fr48 - lddfi @(gr8,#__FPMEDIA_FR(50)),fr50 - lddfi @(gr8,#__FPMEDIA_FR(52)),fr52 - lddfi @(gr8,#__FPMEDIA_FR(54)),fr54 - lddfi @(gr8,#__FPMEDIA_FR(56)),fr56 - lddfi @(gr8,#__FPMEDIA_FR(58)),fr58 - lddfi @(gr8,#__FPMEDIA_FR(60)),fr60 - lddfi @(gr8,#__FPMEDIA_FR(62)),fr62 -__restore_skip_fr32_fr63: - - lddi @(gr8,#__FPMEDIA_FNER(0)),gr4 - movsg fner0,gr4 - movsg fner1,gr5 - or.p gr9,gr9,gr8 - bralr - - # the FR451 also has ACC8-11/ACCG8-11 regs (but not 4-7...) -__restore_acc_fr451: - lddfi @(gr8,#__FPMEDIA_ACC(4)),fr16 - lddfi @(gr8,#__FPMEDIA_ACC(6)),fr18 - ldbfi @(gr8,#__FPMEDIA_ACCG(4)),fr20 - ldbfi @(gr8,#__FPMEDIA_ACCG(5)),fr21 - ldbfi @(gr8,#__FPMEDIA_ACCG(6)),fr22 - ldbfi @(gr8,#__FPMEDIA_ACCG(7)),fr23 - - mwtacc fr16,acc8 - mwtacc fr17,acc9 - mwtacc fr18,acc10 - mwtacc fr19,acc11 - mwtaccg fr20,accg8 - mwtaccg fr21,accg9 - mwtaccg fr22,accg10 - mwtaccg fr23,accg11 - bra __restore_acc_cont - - # the FR555 also has ACC4-7/ACCG4-7 regs and an FSR0 reg -__restore_acc_fr555: - lddfi @(gr8,#__FPMEDIA_ACC(4)),fr16 - lddfi @(gr8,#__FPMEDIA_ACC(6)),fr18 - ldbfi @(gr8,#__FPMEDIA_ACCG(4)),fr20 - ldbfi @(gr8,#__FPMEDIA_ACCG(5)),fr21 - ldbfi @(gr8,#__FPMEDIA_ACCG(6)),fr22 - ldbfi @(gr8,#__FPMEDIA_ACCG(7)),fr23 - - mnop.p - mwtacc fr16,acc4 - mnop.p - mwtacc fr17,acc5 - mnop.p - mwtacc fr18,acc6 - mnop.p - mwtacc fr19,acc7 - mnop.p - mwtaccg fr20,accg4 - mnop.p - mwtaccg fr21,accg5 - mnop.p - mwtaccg fr22,accg6 - mnop.p - mwtaccg fr23,accg7 - - ldi @(gr8,#__FPMEDIA_FSR(0)),gr4 - movgs gr4,fsr0 - - bra __restore_acc_cont - - -############################################################################### -# -# save extra general regs and FP/Media regs -# - void save_user_regs(struct user_context *target) -# -############################################################################### - .globl save_user_regs -save_user_regs: - movsg hsr0,gr6 - ori gr6,#HSR0_GRHE|HSR0_FRLE|HSR0_FRHE,gr6 - movgs gr6,hsr0 - movsg hsr0,gr6 - - movsg psr,gr7 - ori gr7,#PSR_EF|PSR_EM,gr7 - movgs gr7,psr - movsg psr,gr7 - srli gr7,#24,gr7 - bar - - movsg fner0,gr4 - movsg fner1,gr5 - stdi.p gr4,@(gr8,#__FPMEDIA_FNER(0)) - - # some CPU's have GR32-GR63 - setlos #HSR0_GRHE,gr4 - andcc gr6,gr4,gr0,icc0 - beq icc0,#1,__save_skip_gr32_gr63 - - stdi gr32,@(gr8,#__INT_GR(32)) - stdi gr34,@(gr8,#__INT_GR(34)) - stdi gr36,@(gr8,#__INT_GR(36)) - stdi gr38,@(gr8,#__INT_GR(38)) - stdi gr40,@(gr8,#__INT_GR(40)) - stdi gr42,@(gr8,#__INT_GR(42)) - stdi gr44,@(gr8,#__INT_GR(44)) - stdi gr46,@(gr8,#__INT_GR(46)) - stdi gr48,@(gr8,#__INT_GR(48)) - stdi gr50,@(gr8,#__INT_GR(50)) - stdi gr52,@(gr8,#__INT_GR(52)) - stdi gr54,@(gr8,#__INT_GR(54)) - stdi gr56,@(gr8,#__INT_GR(56)) - stdi gr58,@(gr8,#__INT_GR(58)) - stdi gr60,@(gr8,#__INT_GR(60)) - stdi gr62,@(gr8,#__INT_GR(62)) -__save_skip_gr32_gr63: - - # all CPU's have FR0-FR31 - stdfi fr0 ,@(gr8,#__FPMEDIA_FR( 0)) - stdfi fr2 ,@(gr8,#__FPMEDIA_FR( 2)) - stdfi fr4 ,@(gr8,#__FPMEDIA_FR( 4)) - stdfi fr6 ,@(gr8,#__FPMEDIA_FR( 6)) - stdfi fr8 ,@(gr8,#__FPMEDIA_FR( 8)) - stdfi fr10,@(gr8,#__FPMEDIA_FR(10)) - stdfi fr12,@(gr8,#__FPMEDIA_FR(12)) - stdfi fr14,@(gr8,#__FPMEDIA_FR(14)) - stdfi fr16,@(gr8,#__FPMEDIA_FR(16)) - stdfi fr18,@(gr8,#__FPMEDIA_FR(18)) - stdfi fr20,@(gr8,#__FPMEDIA_FR(20)) - stdfi fr22,@(gr8,#__FPMEDIA_FR(22)) - stdfi fr24,@(gr8,#__FPMEDIA_FR(24)) - stdfi fr26,@(gr8,#__FPMEDIA_FR(26)) - stdfi fr28,@(gr8,#__FPMEDIA_FR(28)) - stdfi.p fr30,@(gr8,#__FPMEDIA_FR(30)) - - # some CPU's have FR32-FR63 - setlos #HSR0_FRHE,gr4 - andcc gr6,gr4,gr0,icc0 - beq icc0,#1,__save_skip_fr32_fr63 - - stdfi fr32,@(gr8,#__FPMEDIA_FR(32)) - stdfi fr34,@(gr8,#__FPMEDIA_FR(34)) - stdfi fr36,@(gr8,#__FPMEDIA_FR(36)) - stdfi fr38,@(gr8,#__FPMEDIA_FR(38)) - stdfi fr40,@(gr8,#__FPMEDIA_FR(40)) - stdfi fr42,@(gr8,#__FPMEDIA_FR(42)) - stdfi fr44,@(gr8,#__FPMEDIA_FR(44)) - stdfi fr46,@(gr8,#__FPMEDIA_FR(46)) - stdfi fr48,@(gr8,#__FPMEDIA_FR(48)) - stdfi fr50,@(gr8,#__FPMEDIA_FR(50)) - stdfi fr52,@(gr8,#__FPMEDIA_FR(52)) - stdfi fr54,@(gr8,#__FPMEDIA_FR(54)) - stdfi fr56,@(gr8,#__FPMEDIA_FR(56)) - stdfi fr58,@(gr8,#__FPMEDIA_FR(58)) - stdfi fr60,@(gr8,#__FPMEDIA_FR(60)) - stdfi fr62,@(gr8,#__FPMEDIA_FR(62)) -__save_skip_fr32_fr63: - - mrdacc acc0 ,fr4 - mrdacc acc1 ,fr5 - - stdfi.p fr4 ,@(gr8,#__FPMEDIA_ACC(0)) - - mrdacc acc2 ,fr6 - mrdacc acc3 ,fr7 - - stdfi.p fr6 ,@(gr8,#__FPMEDIA_ACC(2)) - - mrdaccg accg0,fr4 - stbfi.p fr4 ,@(gr8,#__FPMEDIA_ACCG(0)) - - mrdaccg accg1,fr5 - stbfi.p fr5 ,@(gr8,#__FPMEDIA_ACCG(1)) - - mrdaccg accg2,fr6 - stbfi.p fr6 ,@(gr8,#__FPMEDIA_ACCG(2)) - - mrdaccg accg3,fr7 - stbfi fr7 ,@(gr8,#__FPMEDIA_ACCG(3)) - - movsg msr0 ,gr4 - movsg msr1 ,gr5 - - stdi gr4 ,@(gr8,#__FPMEDIA_MSR(0)) - - # some CPUs have extra ACCx and ACCGx regs and maybe FSRx regs - subicc.p gr7,#0x50,gr0,icc0 - subicc gr7,#0x31,gr0,icc1 - beq icc0,#0,__save_acc_fr451 - beq icc1,#0,__save_acc_fr555 -__save_acc_cont: - - lddfi @(gr8,#__FPMEDIA_FR(4)),fr4 - lddfi.p @(gr8,#__FPMEDIA_FR(6)),fr6 - bralr - - # the FR451 also has ACC8-11/ACCG8-11 regs (but not 4-7...) -__save_acc_fr451: - mrdacc acc8 ,fr4 - mrdacc acc9 ,fr5 - - stdfi.p fr4 ,@(gr8,#__FPMEDIA_ACC(4)) - - mrdacc acc10,fr6 - mrdacc acc11,fr7 - - stdfi.p fr6 ,@(gr8,#__FPMEDIA_ACC(6)) - - mrdaccg accg8,fr4 - stbfi.p fr4 ,@(gr8,#__FPMEDIA_ACCG(4)) - - mrdaccg accg9,fr5 - stbfi.p fr5 ,@(gr8,#__FPMEDIA_ACCG(5)) - - mrdaccg accg10,fr6 - stbfi.p fr6 ,@(gr8,#__FPMEDIA_ACCG(6)) - - mrdaccg accg11,fr7 - stbfi fr7 ,@(gr8,#__FPMEDIA_ACCG(7)) - bra __save_acc_cont - - # the FR555 also has ACC4-7/ACCG4-7 regs and an FSR0 reg -__save_acc_fr555: - mnop.p - mrdacc acc4 ,fr4 - mnop.p - mrdacc acc5 ,fr5 - - stdfi fr4 ,@(gr8,#__FPMEDIA_ACC(4)) - - mnop.p - mrdacc acc6 ,fr6 - mnop.p - mrdacc acc7 ,fr7 - - stdfi fr6 ,@(gr8,#__FPMEDIA_ACC(6)) - - mnop.p - mrdaccg accg4,fr4 - stbfi fr4 ,@(gr8,#__FPMEDIA_ACCG(4)) - - mnop.p - mrdaccg accg5,fr5 - stbfi fr5 ,@(gr8,#__FPMEDIA_ACCG(5)) - - mnop.p - mrdaccg accg6,fr6 - stbfi fr6 ,@(gr8,#__FPMEDIA_ACCG(6)) - - mnop.p - mrdaccg accg7,fr7 - stbfi fr7 ,@(gr8,#__FPMEDIA_ACCG(7)) - - movsg fsr0 ,gr4 - sti gr4 ,@(gr8,#__FPMEDIA_FSR(0)) - bra __save_acc_cont diff --git a/arch/frv/kernel/sys_frv.c b/arch/frv/kernel/sys_frv.c deleted file mode 100644 index f80cc8b9bd45..000000000000 --- a/arch/frv/kernel/sys_frv.c +++ /dev/null @@ -1,44 +0,0 @@ -/* sys_frv.c: FRV arch-specific syscall wrappers - * - * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/m68k/kernel/sys_m68k.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/fs.h> -#include <linux/smp.h> -#include <linux/sem.h> -#include <linux/msg.h> -#include <linux/shm.h> -#include <linux/stat.h> -#include <linux/mman.h> -#include <linux/file.h> -#include <linux/syscalls.h> -#include <linux/ipc.h> - -#include <asm/setup.h> -#include <linux/uaccess.h> - -asmlinkage long sys_mmap2(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long pgoff) -{ - /* As with sparc32, make sure the shift for mmap2 is constant - (12), no matter what PAGE_SIZE we have.... */ - - /* But unlike sparc32, don't just silently break if we're - trying to map something we can't */ - if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1)) - return -EINVAL; - - return sys_mmap_pgoff(addr, len, prot, flags, fd, - pgoff >> (PAGE_SHIFT - 12)); -} diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c deleted file mode 100644 index b54a64971cf1..000000000000 --- a/arch/frv/kernel/sysctl.c +++ /dev/null @@ -1,221 +0,0 @@ -/* sysctl.c: implementation of /proc/sys files relating to FRV specifically - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/sysctl.h> -#include <linux/proc_fs.h> -#include <linux/init.h> -#include <linux/uaccess.h> - -static const char frv_cache_wback[] = "wback"; -static const char frv_cache_wthru[] = "wthru"; - -static void frv_change_dcache_mode(unsigned long newmode) -{ - unsigned long flags, hsr0; - - local_irq_save(flags); - - hsr0 = __get_HSR(0); - hsr0 &= ~HSR0_DCE; - __set_HSR(0, hsr0); - - asm volatile(" dcef @(gr0,gr0),#1 \n" - " membar \n" - : : : "memory" - ); - - hsr0 = (hsr0 & ~HSR0_CBM) | newmode; - __set_HSR(0, hsr0); - hsr0 |= HSR0_DCE; - __set_HSR(0, hsr0); - - local_irq_restore(flags); - - //printk("HSR0 now %08lx\n", hsr0); -} - -/*****************************************************************************/ -/* - * handle requests to dynamically switch the write caching mode delivered by /proc - */ -static int procctl_frv_cachemode(struct ctl_table *table, int write, - void __user *buffer, size_t *lenp, - loff_t *ppos) -{ - unsigned long hsr0; - char buff[8]; - int len; - - len = *lenp; - - if (write) { - /* potential state change */ - if (len <= 1 || len > sizeof(buff) - 1) - return -EINVAL; - - if (copy_from_user(buff, buffer, len) != 0) - return -EFAULT; - - if (buff[len - 1] == '\n') - buff[len - 1] = '\0'; - else - buff[len] = '\0'; - - if (strcmp(buff, frv_cache_wback) == 0) { - /* switch dcache into write-back mode */ - frv_change_dcache_mode(HSR0_CBM_COPY_BACK); - return 0; - } - - if (strcmp(buff, frv_cache_wthru) == 0) { - /* switch dcache into write-through mode */ - frv_change_dcache_mode(HSR0_CBM_WRITE_THRU); - return 0; - } - - return -EINVAL; - } - - /* read the state */ - if (*ppos > 0) { - *lenp = 0; - return 0; - } - - hsr0 = __get_HSR(0); - switch (hsr0 & HSR0_CBM) { - case HSR0_CBM_WRITE_THRU: - memcpy(buff, frv_cache_wthru, sizeof(frv_cache_wthru) - 1); - buff[sizeof(frv_cache_wthru) - 1] = '\n'; - len = sizeof(frv_cache_wthru); - break; - default: - memcpy(buff, frv_cache_wback, sizeof(frv_cache_wback) - 1); - buff[sizeof(frv_cache_wback) - 1] = '\n'; - len = sizeof(frv_cache_wback); - break; - } - - if (len > *lenp) - len = *lenp; - - if (copy_to_user(buffer, buff, len) != 0) - return -EFAULT; - - *lenp = len; - *ppos = len; - return 0; - -} /* end procctl_frv_cachemode() */ - -/*****************************************************************************/ -/* - * permit the mm_struct the nominated process is using have its MMU context ID pinned - */ -#ifdef CONFIG_MMU -static int procctl_frv_pin_cxnr(struct ctl_table *table, int write, - void __user *buffer, size_t *lenp, - loff_t *ppos) -{ - pid_t pid; - char buff[16], *p; - int len; - - len = *lenp; - - if (write) { - /* potential state change */ - if (len <= 1 || len > sizeof(buff) - 1) - return -EINVAL; - - if (copy_from_user(buff, buffer, len) != 0) - return -EFAULT; - - if (buff[len - 1] == '\n') - buff[len - 1] = '\0'; - else - buff[len] = '\0'; - - pid = simple_strtoul(buff, &p, 10); - if (*p) - return -EINVAL; - - return cxn_pin_by_pid(pid); - } - - /* read the currently pinned CXN */ - if (*ppos > 0) { - *lenp = 0; - return 0; - } - - len = snprintf(buff, sizeof(buff), "%d\n", cxn_pinned); - if (len > *lenp) - len = *lenp; - - if (copy_to_user(buffer, buff, len) != 0) - return -EFAULT; - - *lenp = len; - *ppos = len; - return 0; - -} /* end procctl_frv_pin_cxnr() */ -#endif - -/* - * FR-V specific sysctls - */ -static struct ctl_table frv_table[] = -{ - { - .procname = "cache-mode", - .data = NULL, - .maxlen = 0, - .mode = 0644, - .proc_handler = procctl_frv_cachemode, - }, -#ifdef CONFIG_MMU - { - .procname = "pin-cxnr", - .data = NULL, - .maxlen = 0, - .mode = 0644, - .proc_handler = procctl_frv_pin_cxnr - }, -#endif - {} -}; - -/* - * Use a temporary sysctl number. Horrid, but will be cleaned up in 2.6 - * when all the PM interfaces exist nicely. - */ -static struct ctl_table frv_dir_table[] = -{ - { - .procname = "frv", - .mode = 0555, - .child = frv_table - }, - {} -}; - -/* - * Initialize power interface - */ -static int __init frv_sysctl_init(void) -{ - register_sysctl_table(frv_dir_table); - return 0; -} - -__initcall(frv_sysctl_init); diff --git a/arch/frv/kernel/time.c b/arch/frv/kernel/time.c deleted file mode 100644 index 332e00bf9d06..000000000000 --- a/arch/frv/kernel/time.c +++ /dev/null @@ -1,122 +0,0 @@ -/* time.c: FRV arch-specific time handling - * - * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/m68k/kernel/time.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/interrupt.h> -#include <linux/profile.h> -#include <linux/irq.h> -#include <linux/mm.h> - -#include <asm/io.h> -#include <asm/timer-regs.h> -#include <asm/mb-regs.h> -#include <asm/mb86943a.h> - -#include <linux/timex.h> - -#define TICK_SIZE (tick_nsec / 1000) - -unsigned long __nongprelbss __clkin_clock_speed_HZ; -unsigned long __nongprelbss __ext_bus_clock_speed_HZ; -unsigned long __nongprelbss __res_bus_clock_speed_HZ; -unsigned long __nongprelbss __sdram_clock_speed_HZ; -unsigned long __nongprelbss __core_bus_clock_speed_HZ; -unsigned long __nongprelbss __core_clock_speed_HZ; -unsigned long __nongprelbss __dsu_clock_speed_HZ; -unsigned long __nongprelbss __serial_clock_speed_HZ; -unsigned long __delay_loops_MHz; - -static irqreturn_t timer_interrupt(int irq, void *dummy); - -static struct irqaction timer_irq = { - .handler = timer_interrupt, - .name = "timer", -}; - -/* - * timer_interrupt() needs to keep up the real-time clock, - * as well as call the "xtime_update()" routine every clocktick - */ -static irqreturn_t timer_interrupt(int irq, void *dummy) -{ - profile_tick(CPU_PROFILING); - - xtime_update(1); - -#ifdef CONFIG_HEARTBEAT - static unsigned short n; - n++; - __set_LEDS(n); -#endif /* CONFIG_HEARTBEAT */ - - update_process_times(user_mode(get_irq_regs())); - - return IRQ_HANDLED; -} - -void time_divisor_init(void) -{ - unsigned short base, pre, prediv; - - /* set the scheduling timer going */ - pre = 1; - prediv = 4; - base = __res_bus_clock_speed_HZ / pre / HZ / (1 << prediv); - - __set_TPRV(pre); - __set_TxCKSL_DATA(0, prediv); - __set_TCTR(TCTR_SC_CTR0 | TCTR_RL_RW_LH8 | TCTR_MODE_2); - __set_TCSR_DATA(0, base & 0xff); - __set_TCSR_DATA(0, base >> 8); -} - - -void read_persistent_clock(struct timespec *ts) -{ - unsigned int year, mon, day, hour, min, sec; - - extern void arch_gettod(int *year, int *mon, int *day, int *hour, int *min, int *sec); - - /* FIX by dqg : Set to zero for platforms that don't have tod */ - /* without this time is undefined and can overflow time_t, causing */ - /* very strange errors */ - year = 1980; - mon = day = 1; - hour = min = sec = 0; - arch_gettod (&year, &mon, &day, &hour, &min, &sec); - - if ((year += 1900) < 1970) - year += 100; - ts->tv_sec = mktime(year, mon, day, hour, min, sec); - ts->tv_nsec = 0; -} - -void time_init(void) -{ - /* install scheduling interrupt handler */ - setup_irq(IRQ_CPU_TIMER0, &timer_irq); - - time_divisor_init(); -} - -/* - * Scheduler clock - returns current time in nanosec units. - */ -unsigned long long sched_clock(void) -{ - return jiffies_64 * (1000000000 / HZ); -} diff --git a/arch/frv/kernel/traps.c b/arch/frv/kernel/traps.c deleted file mode 100644 index fb08ebe0dab4..000000000000 --- a/arch/frv/kernel/traps.c +++ /dev/null @@ -1,642 +0,0 @@ -/* traps.c: high-level exception handler for FR-V - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/sched/signal.h> -#include <linux/sched/debug.h> -#include <linux/signal.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/types.h> -#include <linux/user.h> -#include <linux/string.h> -#include <linux/linkage.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/asm-offsets.h> -#include <asm/setup.h> -#include <asm/fpu.h> -#include <linux/uaccess.h> -#include <asm/pgtable.h> -#include <asm/siginfo.h> -#include <asm/unaligned.h> - -void show_backtrace(struct pt_regs *, unsigned long); - -extern asmlinkage void __break_hijack_kernel_event(void); - -/*****************************************************************************/ -/* - * instruction access error - */ -asmlinkage void insn_access_error(unsigned long esfr1, unsigned long epcr0, unsigned long esr0) -{ - siginfo_t info; - - die_if_kernel("-- Insn Access Error --\n" - "EPCR0 : %08lx\n" - "ESR0 : %08lx\n", - epcr0, esr0); - - info.si_signo = SIGSEGV; - info.si_code = SEGV_ACCERR; - info.si_errno = 0; - info.si_addr = (void __user *) ((epcr0 & EPCR0_V) ? (epcr0 & EPCR0_PC) : __frame->pc); - - force_sig_info(info.si_signo, &info, current); -} /* end insn_access_error() */ - -/*****************************************************************************/ -/* - * handler for: - * - illegal instruction - * - privileged instruction - * - unsupported trap - * - debug exceptions - */ -asmlinkage void illegal_instruction(unsigned long esfr1, unsigned long epcr0, unsigned long esr0) -{ - siginfo_t info; - - die_if_kernel("-- Illegal Instruction --\n" - "EPCR0 : %08lx\n" - "ESR0 : %08lx\n" - "ESFR1 : %08lx\n", - epcr0, esr0, esfr1); - - info.si_errno = 0; - info.si_addr = (void __user *) ((epcr0 & EPCR0_V) ? (epcr0 & EPCR0_PC) : __frame->pc); - - switch (__frame->tbr & TBR_TT) { - case TBR_TT_ILLEGAL_INSTR: - info.si_signo = SIGILL; - info.si_code = ILL_ILLOPC; - break; - case TBR_TT_PRIV_INSTR: - info.si_signo = SIGILL; - info.si_code = ILL_PRVOPC; - break; - case TBR_TT_TRAP2 ... TBR_TT_TRAP126: - info.si_signo = SIGILL; - info.si_code = ILL_ILLTRP; - break; - /* GDB uses "tira gr0, #1" as a breakpoint instruction. */ - case TBR_TT_TRAP1: - case TBR_TT_BREAK: - info.si_signo = SIGTRAP; - info.si_code = - (__frame->__status & REG__STATUS_STEPPED) ? TRAP_TRACE : TRAP_BRKPT; - break; - } - - force_sig_info(info.si_signo, &info, current); -} /* end illegal_instruction() */ - -/*****************************************************************************/ -/* - * handle atomic operations with errors - * - arguments in gr8, gr9, gr10 - * - original memory value placed in gr5 - * - replacement memory value placed in gr9 - */ -asmlinkage void atomic_operation(unsigned long esfr1, unsigned long epcr0, - unsigned long esr0) -{ - static DEFINE_SPINLOCK(atomic_op_lock); - unsigned long x, y, z; - unsigned long __user *p; - mm_segment_t oldfs; - siginfo_t info; - int ret; - - y = 0; - z = 0; - - oldfs = get_fs(); - if (!user_mode(__frame)) - set_fs(KERNEL_DS); - - switch (__frame->tbr & TBR_TT) { - /* TIRA gr0,#120 - * u32 __atomic_user_cmpxchg32(u32 *ptr, u32 test, u32 new) - */ - case TBR_TT_ATOMIC_CMPXCHG32: - p = (unsigned long __user *) __frame->gr8; - x = __frame->gr9; - y = __frame->gr10; - - for (;;) { - ret = get_user(z, p); - if (ret < 0) - goto error; - - if (z != x) - goto done; - - spin_lock_irq(&atomic_op_lock); - - if (__get_user(z, p) == 0) { - if (z != x) - goto done2; - - if (__put_user(y, p) == 0) - goto done2; - goto error2; - } - - spin_unlock_irq(&atomic_op_lock); - } - - /* TIRA gr0,#121 - * u32 __atomic_kernel_xchg32(void *v, u32 new) - */ - case TBR_TT_ATOMIC_XCHG32: - p = (unsigned long __user *) __frame->gr8; - y = __frame->gr9; - - for (;;) { - ret = get_user(z, p); - if (ret < 0) - goto error; - - spin_lock_irq(&atomic_op_lock); - - if (__get_user(z, p) == 0) { - if (__put_user(y, p) == 0) - goto done2; - goto error2; - } - - spin_unlock_irq(&atomic_op_lock); - } - - /* TIRA gr0,#122 - * ulong __atomic_kernel_XOR_return(ulong i, ulong *v) - */ - case TBR_TT_ATOMIC_XOR: - p = (unsigned long __user *) __frame->gr8; - x = __frame->gr9; - - for (;;) { - ret = get_user(z, p); - if (ret < 0) - goto error; - - spin_lock_irq(&atomic_op_lock); - - if (__get_user(z, p) == 0) { - y = x ^ z; - if (__put_user(y, p) == 0) - goto done2; - goto error2; - } - - spin_unlock_irq(&atomic_op_lock); - } - - /* TIRA gr0,#123 - * ulong __atomic_kernel_OR_return(ulong i, ulong *v) - */ - case TBR_TT_ATOMIC_OR: - p = (unsigned long __user *) __frame->gr8; - x = __frame->gr9; - - for (;;) { - ret = get_user(z, p); - if (ret < 0) - goto error; - - spin_lock_irq(&atomic_op_lock); - - if (__get_user(z, p) == 0) { - y = x ^ z; - if (__put_user(y, p) == 0) - goto done2; - goto error2; - } - - spin_unlock_irq(&atomic_op_lock); - } - - /* TIRA gr0,#124 - * ulong __atomic_kernel_AND_return(ulong i, ulong *v) - */ - case TBR_TT_ATOMIC_AND: - p = (unsigned long __user *) __frame->gr8; - x = __frame->gr9; - - for (;;) { - ret = get_user(z, p); - if (ret < 0) - goto error; - - spin_lock_irq(&atomic_op_lock); - - if (__get_user(z, p) == 0) { - y = x & z; - if (__put_user(y, p) == 0) - goto done2; - goto error2; - } - - spin_unlock_irq(&atomic_op_lock); - } - - /* TIRA gr0,#125 - * int __atomic_user_sub_return(atomic_t *v, int i) - */ - case TBR_TT_ATOMIC_SUB: - p = (unsigned long __user *) __frame->gr8; - x = __frame->gr9; - - for (;;) { - ret = get_user(z, p); - if (ret < 0) - goto error; - - spin_lock_irq(&atomic_op_lock); - - if (__get_user(z, p) == 0) { - y = z - x; - if (__put_user(y, p) == 0) - goto done2; - goto error2; - } - - spin_unlock_irq(&atomic_op_lock); - } - - /* TIRA gr0,#126 - * int __atomic_user_add_return(atomic_t *v, int i) - */ - case TBR_TT_ATOMIC_ADD: - p = (unsigned long __user *) __frame->gr8; - x = __frame->gr9; - - for (;;) { - ret = get_user(z, p); - if (ret < 0) - goto error; - - spin_lock_irq(&atomic_op_lock); - - if (__get_user(z, p) == 0) { - y = z + x; - if (__put_user(y, p) == 0) - goto done2; - goto error2; - } - - spin_unlock_irq(&atomic_op_lock); - } - - default: - BUG(); - } - -done2: - spin_unlock_irq(&atomic_op_lock); -done: - if (!user_mode(__frame)) - set_fs(oldfs); - __frame->gr5 = z; - __frame->gr9 = y; - return; - -error2: - spin_unlock_irq(&atomic_op_lock); -error: - if (!user_mode(__frame)) - set_fs(oldfs); - __frame->pc -= 4; - - die_if_kernel("-- Atomic Op Error --\n"); - - info.si_signo = SIGSEGV; - info.si_code = SEGV_ACCERR; - info.si_errno = 0; - info.si_addr = (void __user *) __frame->pc; - - force_sig_info(info.si_signo, &info, current); -} - -/*****************************************************************************/ -/* - * - */ -asmlinkage void media_exception(unsigned long msr0, unsigned long msr1) -{ - siginfo_t info; - - die_if_kernel("-- Media Exception --\n" - "MSR0 : %08lx\n" - "MSR1 : %08lx\n", - msr0, msr1); - - info.si_signo = SIGFPE; - info.si_code = FPE_MDAOVF; - info.si_errno = 0; - info.si_addr = (void __user *) __frame->pc; - - force_sig_info(info.si_signo, &info, current); -} /* end media_exception() */ - -/*****************************************************************************/ -/* - * instruction or data access exception - */ -asmlinkage void memory_access_exception(unsigned long esr0, - unsigned long ear0, - unsigned long epcr0) -{ - siginfo_t info; - -#ifdef CONFIG_MMU - if (fixup_exception(__frame)) - return; -#endif - - die_if_kernel("-- Memory Access Exception --\n" - "ESR0 : %08lx\n" - "EAR0 : %08lx\n" - "EPCR0 : %08lx\n", - esr0, ear0, epcr0); - - info.si_signo = SIGSEGV; - info.si_code = SEGV_ACCERR; - info.si_errno = 0; - info.si_addr = NULL; - - if ((esr0 & (ESRx_VALID | ESR0_EAV)) == (ESRx_VALID | ESR0_EAV)) - info.si_addr = (void __user *) ear0; - - force_sig_info(info.si_signo, &info, current); - -} /* end memory_access_exception() */ - -/*****************************************************************************/ -/* - * data access error - * - double-word data load from CPU control area (0xFExxxxxx) - * - read performed on inactive or self-refreshing SDRAM - * - error notification from slave device - * - misaligned address - * - access to out of bounds memory region - * - user mode accessing privileged memory region - * - write to R/O memory region - */ -asmlinkage void data_access_error(unsigned long esfr1, unsigned long esr15, unsigned long ear15) -{ - siginfo_t info; - - die_if_kernel("-- Data Access Error --\n" - "ESR15 : %08lx\n" - "EAR15 : %08lx\n", - esr15, ear15); - - info.si_signo = SIGSEGV; - info.si_code = SEGV_ACCERR; - info.si_errno = 0; - info.si_addr = (void __user *) - (((esr15 & (ESRx_VALID|ESR15_EAV)) == (ESRx_VALID|ESR15_EAV)) ? ear15 : 0); - - force_sig_info(info.si_signo, &info, current); -} /* end data_access_error() */ - -/*****************************************************************************/ -/* - * data store error - should only happen if accessing inactive or self-refreshing SDRAM - */ -asmlinkage void data_store_error(unsigned long esfr1, unsigned long esr15) -{ - die_if_kernel("-- Data Store Error --\n" - "ESR15 : %08lx\n", - esr15); - BUG(); -} /* end data_store_error() */ - -/*****************************************************************************/ -/* - * - */ -asmlinkage void division_exception(unsigned long esfr1, unsigned long esr0, unsigned long isr) -{ - siginfo_t info; - - die_if_kernel("-- Division Exception --\n" - "ESR0 : %08lx\n" - "ISR : %08lx\n", - esr0, isr); - - info.si_signo = SIGFPE; - info.si_code = FPE_INTDIV; - info.si_errno = 0; - info.si_addr = (void __user *) __frame->pc; - - force_sig_info(info.si_signo, &info, current); -} /* end division_exception() */ - -/*****************************************************************************/ -/* - * - */ -asmlinkage void compound_exception(unsigned long esfr1, - unsigned long esr0, unsigned long esr14, unsigned long esr15, - unsigned long msr0, unsigned long msr1) -{ - die_if_kernel("-- Compound Exception --\n" - "ESR0 : %08lx\n" - "ESR15 : %08lx\n" - "ESR15 : %08lx\n" - "MSR0 : %08lx\n" - "MSR1 : %08lx\n", - esr0, esr14, esr15, msr0, msr1); - BUG(); -} /* end compound_exception() */ - -void show_stack(struct task_struct *task, unsigned long *sp) -{ -} - -void show_trace_task(struct task_struct *tsk) -{ - printk("CONTEXT: stack=0x%lx frame=0x%p LR=0x%lx RET=0x%lx\n", - tsk->thread.sp, tsk->thread.frame, tsk->thread.lr, tsk->thread.sched_lr); -} - -static const char *regnames[] = { - "PSR ", "ISR ", "CCR ", "CCCR", - "LR ", "LCR ", "PC ", "_stt", - "sys ", "GR8*", "GNE0", "GNE1", - "IACH", "IACL", - "TBR ", "SP ", "FP ", "GR3 ", - "GR4 ", "GR5 ", "GR6 ", "GR7 ", - "GR8 ", "GR9 ", "GR10", "GR11", - "GR12", "GR13", "GR14", "GR15", - "GR16", "GR17", "GR18", "GR19", - "GR20", "GR21", "GR22", "GR23", - "GR24", "GR25", "GR26", "GR27", - "EFRM", "CURR", "GR30", "BFRM" -}; - -void show_regs(struct pt_regs *regs) -{ - unsigned long *reg; - int loop; - - printk("\n"); - show_regs_print_info(KERN_DEFAULT); - - printk("Frame: @%08lx [%s]\n", - (unsigned long) regs, - regs->psr & PSR_S ? "kernel" : "user"); - - reg = (unsigned long *) regs; - for (loop = 0; loop < NR_PT_REGS; loop++) { - printk("%s %08lx", regnames[loop + 0], reg[loop + 0]); - - if (loop == NR_PT_REGS - 1 || loop % 5 == 4) - printk("\n"); - else - printk(" | "); - } -} - -void die_if_kernel(const char *str, ...) -{ - char buffer[256]; - va_list va; - - if (user_mode(__frame)) - return; - - va_start(va, str); - vsnprintf(buffer, sizeof(buffer), str, va); - va_end(va); - - console_verbose(); - printk("\n===================================\n"); - printk("%s\n", buffer); - show_backtrace(__frame, 0); - - __break_hijack_kernel_event(); - do_exit(SIGSEGV); -} - -/*****************************************************************************/ -/* - * dump the contents of an exception frame - */ -static void show_backtrace_regs(struct pt_regs *frame) -{ - unsigned long *reg; - int loop; - - /* print the registers for this frame */ - printk("<-- %s Frame: @%p -->\n", - frame->psr & PSR_S ? "Kernel Mode" : "User Mode", - frame); - - reg = (unsigned long *) frame; - for (loop = 0; loop < NR_PT_REGS; loop++) { - printk("%s %08lx", regnames[loop + 0], reg[loop + 0]); - - if (loop == NR_PT_REGS - 1 || loop % 5 == 4) - printk("\n"); - else - printk(" | "); - } - - printk("--------\n"); -} /* end show_backtrace_regs() */ - -/*****************************************************************************/ -/* - * generate a backtrace of the kernel stack - */ -void show_backtrace(struct pt_regs *frame, unsigned long sp) -{ - struct pt_regs *frame0; - unsigned long tos = 0, stop = 0, base; - int format; - - base = ((((unsigned long) frame) + 8191) & ~8191) - sizeof(struct user_context); - frame0 = (struct pt_regs *) base; - - if (sp) { - tos = sp; - stop = (unsigned long) frame; - } - - printk("\nProcess %s (pid: %d)\n\n", current->comm, current->pid); - - for (;;) { - /* dump stack segment between frames */ - //printk("%08lx -> %08lx\n", tos, stop); - format = 0; - while (tos < stop) { - if (format == 0) - printk(" %04lx :", tos & 0xffff); - - printk(" %08lx", *(unsigned long *) tos); - - tos += 4; - format++; - if (format == 8) { - printk("\n"); - format = 0; - } - } - - if (format > 0) - printk("\n"); - - /* dump frame 0 outside of the loop */ - if (frame == frame0) - break; - - tos = frame->sp; - if (((unsigned long) frame) + sizeof(*frame) != tos) { - printk("-- TOS %08lx does not follow frame %p --\n", - tos, frame); - break; - } - - show_backtrace_regs(frame); - - /* dump the stack between this frame and the next */ - stop = (unsigned long) frame->next_frame; - if (stop != base && - (stop < tos || - stop > base || - (stop < base && stop + sizeof(*frame) > base) || - stop & 3)) { - printk("-- next_frame %08lx is invalid (range %08lx-%08lx) --\n", - stop, tos, base); - break; - } - - /* move to next frame */ - frame = frame->next_frame; - } - - /* we can always dump frame 0, even if the rest of the stack is corrupt */ - show_backtrace_regs(frame0); - -} /* end show_backtrace() */ - -/*****************************************************************************/ -/* - * initialise traps - */ -void __init trap_init (void) -{ -} /* end trap_init() */ diff --git a/arch/frv/kernel/uaccess.c b/arch/frv/kernel/uaccess.c deleted file mode 100644 index 8b360b4222a5..000000000000 --- a/arch/frv/kernel/uaccess.c +++ /dev/null @@ -1,100 +0,0 @@ -/* uaccess.c: userspace access functions - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/uaccess.h> - -/*****************************************************************************/ -/* - * copy a null terminated string from userspace - */ -long strncpy_from_user(char *dst, const char __user *src, long count) -{ - unsigned long max; - char *p, ch; - long err = -EFAULT; - - BUG_ON(count < 0); - - p = dst; - -#ifndef CONFIG_MMU - if ((unsigned long) src < memory_start) - goto error; -#endif - - if ((unsigned long) src >= get_addr_limit()) - goto error; - - max = get_addr_limit() - (unsigned long) src; - if ((unsigned long) count > max) { - memset(dst + max, 0, count - max); - count = max; - } - - err = 0; - for (; count > 0; count--, p++, src++) { - __get_user_asm(err, ch, src, "ub", "=r"); - if (err < 0) - goto error; - if (!ch) - break; - *p = ch; - } - - err = p - dst; /* return length excluding NUL */ - - error: - if (count > 0) - memset(p, 0, count); /* clear remainder of buffer [security] */ - - return err; - -} /* end strncpy_from_user() */ - -EXPORT_SYMBOL(strncpy_from_user); - -/*****************************************************************************/ -/* - * Return the size of a string (including the ending 0) - * - * Return 0 on exception, a value greater than N if too long - */ -long strnlen_user(const char __user *src, long count) -{ - const char __user *p; - long err = 0; - char ch; - - BUG_ON(count < 0); - -#ifndef CONFIG_MMU - if ((unsigned long) src < memory_start) - return 0; -#endif - - if ((unsigned long) src >= get_addr_limit()) - return 0; - - for (p = src; count > 0; count--, p++) { - __get_user_asm(err, ch, p, "ub", "=r"); - if (err < 0) - return 0; - if (!ch) - break; - } - - return p - src + 1; /* return length including NUL */ - -} /* end strnlen_user() */ - -EXPORT_SYMBOL(strnlen_user); diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S deleted file mode 100644 index 42806c512758..000000000000 --- a/arch/frv/kernel/vmlinux.lds.S +++ /dev/null @@ -1,136 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* ld script to make FRV Linux kernel - * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>; - */ -OUTPUT_FORMAT("elf32-frv", "elf32-frv", "elf32-frv") -OUTPUT_ARCH(frv) -ENTRY(_start) - -#include <asm-generic/vmlinux.lds.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cache.h> -#include <asm/thread_info.h> - -jiffies = jiffies_64 + 4; - -__page_offset = CONFIG_PAGE_OFFSET; /* start of area covered by struct pages */ -__kernel_image_start = __page_offset; /* address at which kernel image resides */ - -SECTIONS -{ - . = __kernel_image_start; - - /* discardable initialisation code and data */ - . = ALIGN(PAGE_SIZE); /* Init code and data */ - __init_begin = .; - - _sinittext = .; - .init.text : { - HEAD_TEXT -#ifndef CONFIG_DEBUG_INFO - INIT_TEXT - EXIT_TEXT - EXIT_DATA - *(.exitcall.exit) -#endif - } - _einittext = .; - - INIT_DATA_SECTION(8) - PERCPU_SECTION(L1_CACHE_BYTES) - - . = ALIGN(PAGE_SIZE); - __init_end = .; - - .trap : { - /* trap table management - read entry-table.S before modifying */ - . = ALIGN(8192); - __trap_tables = .; - *(.trap.user) - *(.trap.kernel) - . = ALIGN(4096); - *(.trap.break) - } - - /* Text and read-only data */ - . = ALIGN(4); - _text = .; - _stext = .; - .text : { - *(.text..start) - *(.text..entry) - *(.text..break) - *(.text..tlbmiss) - TEXT_TEXT - SCHED_TEXT - CPUIDLE_TEXT - LOCK_TEXT -#ifdef CONFIG_DEBUG_INFO - INIT_TEXT - EXIT_TEXT - *(.exitcall.exit) -#endif - *(.fixup) - *(.gnu.warning) - *(.exitcall.exit) - } = 0x9090 - - _etext = .; /* End of text section */ - - RODATA - - .rodata : { - *(.trap.vector) - - /* this clause must not be modified - the ordering and adjacency are imperative */ - __trap_fixup_tables = .; - *(.trap.fixup.user .trap.fixup.kernel) - - } - - EXCEPTION_TABLE(8) - - _sdata = .; - .data : { /* Data */ - INIT_TASK_DATA(THREAD_SIZE) - CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) - DATA_DATA - *(.data.*) - EXIT_DATA - CONSTRUCTORS - } - - _edata = .; /* End of data section */ - - BUG_TABLE - - /* GP section */ - . = ALIGN(L1_CACHE_BYTES); - _gp = . + 2048; - PROVIDE (gp = _gp); - - .sdata : { *(.sdata .sdata.*) } - - /* BSS */ - . = ALIGN(L1_CACHE_BYTES); - __bss_start = .; - - .sbss : { *(.sbss .sbss.*) } - .bss : { *(.bss .bss.*) } - .bss..stack : { *(.bss) } - - __bss_stop = .; - _end = . ; - . = ALIGN(PAGE_SIZE); - __kernel_image_end = .; - - STABS_DEBUG - DWARF_DEBUG - - .comment 0 : { *(.comment) } - - DISCARDS -} - -__kernel_image_size_no_bss = __bss_start - __kernel_image_start; diff --git a/arch/frv/lib/Makefile b/arch/frv/lib/Makefile deleted file mode 100644 index 970e8b4f1a02..000000000000 --- a/arch/frv/lib/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for FRV-specific library files.. -# - -lib-y := \ - __ashldi3.o __lshrdi3.o __muldi3.o __ashrdi3.o __negdi2.o __ucmpdi2.o \ - checksum.o memcpy.o memset.o atomic-ops.o atomic64-ops.o \ - outsl_ns.o outsl_sw.o insl_ns.o insl_sw.o cache.o atomic-lib.o diff --git a/arch/frv/lib/__ashldi3.S b/arch/frv/lib/__ashldi3.S deleted file mode 100644 index db5b6dc37a11..000000000000 --- a/arch/frv/lib/__ashldi3.S +++ /dev/null @@ -1,40 +0,0 @@ -/* __ashldi3.S: 64-bit arithmetic shift left - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - .text - .p2align 4 - -############################################################################### -# -# unsigned long long __ashldi3(unsigned long long value [GR8:GR9], unsigned by [GR10]) -# -############################################################################### - .globl __ashldi3 - .type __ashldi3,@function -__ashldi3: - andicc.p gr10,#63,gr10,icc0 - setlos #32,gr5 - andicc.p gr10,#32,gr0,icc1 - beqlr icc0,#0 - ckeq icc1,cc4 ; cc4 is true if 0<N<32 - - # deal with a shift in the range 1<=N<=31 - csll.p gr8,gr10,gr8 ,cc4,#1 ; MSW <<= N - csub gr5,gr10,gr5 ,cc4,#1 ; M = 32 - N - csrl.p gr9,gr5,gr4 ,cc4,#1 - csll gr9,gr10,gr9 ,cc4,#1 ; LSW <<= N - cor.p gr4,gr8,gr8 ,cc4,#1 ; MSW |= LSW >> M - - # deal with a shift in the range 32<=N<=63 - csll gr9,gr10,gr8 ,cc4,#0 ; MSW = LSW << (N & 31 [implicit AND]) - cor.p gr0,gr0,gr9 ,cc4,#0 ; LSW = 0 - bralr - .size __ashldi3, .-__ashldi3 diff --git a/arch/frv/lib/__ashrdi3.S b/arch/frv/lib/__ashrdi3.S deleted file mode 100644 index 5742665bfd29..000000000000 --- a/arch/frv/lib/__ashrdi3.S +++ /dev/null @@ -1,41 +0,0 @@ -/* __ashrdi3.S: 64-bit arithmetic shift right - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - .text - .p2align 4 - -############################################################################### -# -# signed long long __ashrdi3(signed long long value [GR8:GR9], unsigned by [GR10]) -# -############################################################################### - .globl __ashrdi3 - .type __ashrdi3,@function -__ashrdi3: - andicc.p gr10,#63,gr10,icc0 - setlos #32,gr5 - andicc.p gr10,#32,gr0,icc1 - beqlr icc0,#0 - setlos.p #31,gr6 - ckeq icc1,cc4 ; cc4 is true if 0<N<32 - - # deal with a shift in the range 1<=N<=31 - csrl.p gr9,gr10,gr9 ,cc4,#1 ; LSW >>= N - csub gr5,gr10,gr5 ,cc4,#1 ; M = 32 - N - csll.p gr8,gr5,gr4 ,cc4,#1 - csra gr8,gr10,gr8 ,cc4,#1 ; MSW >>= N - cor.p gr4,gr9,gr9 ,cc4,#1 ; LSW |= MSW << M - - # deal with a shift in the range 32<=N<=63 - csra gr8,gr10,gr9 ,cc4,#0 ; LSW = MSW >> (N & 31 [implicit AND]) - csra.p gr8,gr6,gr8 ,cc4,#0 ; MSW >>= 31 - bralr - .size __ashrdi3, .-__ashrdi3 diff --git a/arch/frv/lib/__lshrdi3.S b/arch/frv/lib/__lshrdi3.S deleted file mode 100644 index 7b41f6304f04..000000000000 --- a/arch/frv/lib/__lshrdi3.S +++ /dev/null @@ -1,40 +0,0 @@ -/* __lshrdi3.S: 64-bit logical shift right - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - .text - .p2align 4 - -############################################################################### -# -# unsigned long long __lshrdi3(unsigned long long value [GR8:GR9], unsigned by [GR10]) -# -############################################################################### - .globl __lshrdi3 - .type __lshrdi3,@function -__lshrdi3: - andicc.p gr10,#63,gr10,icc0 - setlos #32,gr5 - andicc.p gr10,#32,gr0,icc1 - beqlr icc0,#0 - ckeq icc1,cc4 ; cc4 is true if 0<N<32 - - # deal with a shift in the range 1<=N<=31 - csrl.p gr9,gr10,gr9 ,cc4,#1 ; LSW >>= N - csub gr5,gr10,gr5 ,cc4,#1 ; M = 32 - N - csll.p gr8,gr5,gr4 ,cc4,#1 - csrl gr8,gr10,gr8 ,cc4,#1 ; MSW >>= N - cor.p gr4,gr9,gr9 ,cc4,#1 ; LSW |= MSW << M - - # deal with a shift in the range 32<=N<=63 - csrl gr8,gr10,gr9 ,cc4,#0 ; LSW = MSW >> (N & 31 [implicit AND]) - cor.p gr0,gr0,gr8 ,cc4,#0 ; MSW = 0 - bralr - .size __lshrdi3, .-__lshrdi3 diff --git a/arch/frv/lib/__muldi3.S b/arch/frv/lib/__muldi3.S deleted file mode 100644 index 2703d9b79361..000000000000 --- a/arch/frv/lib/__muldi3.S +++ /dev/null @@ -1,32 +0,0 @@ -/* __muldi3.S: 64-bit multiply - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - .text - .p2align 4 - -############################################################################### -# -# unsigned long long __muldi3(unsigned long long x [GR8:GR9], -# unsigned long long y [GR10:GR11]) -# -############################################################################### - .globl __muldi3, __mulll, __umulll - .type __muldi3,@function -__muldi3: -__mulll: -__umulll: - umul gr8,gr11,gr4 ; GR4:GR5 = x.MSW * y.LSW - umul gr9,gr10,gr6 ; GR6:GR7 = x.LSW * y.MSW - umul.p gr9,gr11,gr8 ; GR8:GR9 = x.LSW * y.LSW - add gr5,gr7,gr5 - add.p gr8,gr5,gr8 ; GR8 += GR5 + GR7 - bralr - .size __muldi3, .-__muldi3 diff --git a/arch/frv/lib/__negdi2.S b/arch/frv/lib/__negdi2.S deleted file mode 100644 index d1747bf24997..000000000000 --- a/arch/frv/lib/__negdi2.S +++ /dev/null @@ -1,28 +0,0 @@ -/* __negdi2.S: 64-bit negate - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - - .text - .p2align 4 - -############################################################################### -# -# unsigned long long __negdi2(unsigned long long value [GR8:GR9]) -# -############################################################################### - .globl __negdi2 - .type __negdi2,@function -__negdi2: - subcc gr0,gr9,gr9,icc0 - subx gr0,gr8,gr8,icc0 - bralr - .size __negdi2, .-__negdi2 - diff --git a/arch/frv/lib/__ucmpdi2.S b/arch/frv/lib/__ucmpdi2.S deleted file mode 100644 index d892f16ffaa9..000000000000 --- a/arch/frv/lib/__ucmpdi2.S +++ /dev/null @@ -1,45 +0,0 @@ -/* __ucmpdi2.S: 64-bit unsigned compare - * - * Copyright (C) 2006 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - - .text - .p2align 4 - -############################################################################### -# -# int __ucmpdi2(unsigned long long a [GR8:GR9], -# unsigned long long b [GR10:GR11]) -# -# - returns 0, 1, or 2 as a <, =, > b respectively. -# -############################################################################### - .globl __ucmpdi2 - .type __ucmpdi2,@function -__ucmpdi2: - or.p gr8,gr0,gr4 - subcc gr8,gr10,gr0,icc0 - setlos.p #0,gr8 - bclr icc0,#2 ; a.msw < b.msw - - setlos.p #2,gr8 - bhilr icc0,#0 ; a.msw > b.msw - - subcc.p gr9,gr11,gr0,icc1 - setlos #0,gr8 - setlos.p #2,gr9 - setlos #1,gr7 - cknc icc1,cc6 - cor.p gr9,gr0,gr8, cc6,#1 - cckls icc1,cc4, cc6,#1 - andcr cc6,cc4,cc4 - cor gr7,gr0,gr8, cc4,#1 - bralr - .size __ucmpdi2, .-__ucmpdi2 diff --git a/arch/frv/lib/atomic-lib.c b/arch/frv/lib/atomic-lib.c deleted file mode 100644 index 3027576f7782..000000000000 --- a/arch/frv/lib/atomic-lib.c +++ /dev/null @@ -1,8 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <linux/export.h> -#include <asm/atomic.h> - -#define __ATOMIC_LIB__ - -#include <asm/atomic_defs.h> diff --git a/arch/frv/lib/atomic-ops.S b/arch/frv/lib/atomic-ops.S deleted file mode 100644 index b7439a960b5b..000000000000 --- a/arch/frv/lib/atomic-ops.S +++ /dev/null @@ -1,62 +0,0 @@ -/* atomic-ops.S: kernel atomic operations - * - * For an explanation of how atomic ops work in this arch, see: - * Documentation/frv/atomic-ops.txt - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/spr-regs.h> - - .text - .balign 4 - -############################################################################### -# -# uint32_t __xchg_32(uint32_t i, uint32_t *v) -# -############################################################################### - .globl __xchg_32 - .type __xchg_32,@function -__xchg_32: - or.p gr8,gr8,gr10 -0: - orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ - ckeq icc3,cc7 - ld.p @(gr9,gr0),gr8 /* LD.P/ORCR must be atomic */ - orcr cc7,cc7,cc3 /* set CC3 to true */ - cst.p gr10,@(gr9,gr0) ,cc3,#1 - corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ - beq icc3,#0,0b - bralr - - .size __xchg_32, .-__xchg_32 - -############################################################################### -# -# uint32_t __cmpxchg_32(uint32_t *v, uint32_t test, uint32_t new) -# -############################################################################### - .globl __cmpxchg_32 - .type __cmpxchg_32,@function -__cmpxchg_32: - or.p gr8,gr8,gr11 -0: - orcc gr0,gr0,gr0,icc3 - ckeq icc3,cc7 - ld.p @(gr11,gr0),gr8 - orcr cc7,cc7,cc3 - subcc gr8,gr9,gr7,icc0 - bnelr icc0,#0 - cst.p gr10,@(gr11,gr0) ,cc3,#1 - corcc gr29,gr29,gr0 ,cc3,#1 - beq icc3,#0,0b - bralr - - .size __cmpxchg_32, .-__cmpxchg_32 diff --git a/arch/frv/lib/atomic64-ops.S b/arch/frv/lib/atomic64-ops.S deleted file mode 100644 index c4c472308a33..000000000000 --- a/arch/frv/lib/atomic64-ops.S +++ /dev/null @@ -1,68 +0,0 @@ -/* kernel atomic64 operations - * - * For an explanation of how atomic ops work in this arch, see: - * Documentation/frv/atomic-ops.txt - * - * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/spr-regs.h> - - .text - .balign 4 - - -############################################################################### -# -# uint64_t __xchg_64(uint64_t i, uint64_t *v) -# -############################################################################### - .globl __xchg_64 - .type __xchg_64,@function -__xchg_64: - or.p gr8,gr8,gr4 - or gr9,gr9,gr5 -0: - orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ - ckeq icc3,cc7 - ldd.p @(gr10,gr0),gr8 /* LDD.P/ORCR must be atomic */ - orcr cc7,cc7,cc3 /* set CC3 to true */ - cstd.p gr4,@(gr10,gr0) ,cc3,#1 - corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ - beq icc3,#0,0b - bralr - - .size __xchg_64, .-__xchg_64 - -############################################################################### -# -# uint64_t __cmpxchg_64(uint64_t test, uint64_t new, uint64_t *v) -# -############################################################################### - .globl __cmpxchg_64 - .type __cmpxchg_64,@function -__cmpxchg_64: - or.p gr8,gr8,gr4 - or gr9,gr9,gr5 -0: - orcc gr0,gr0,gr0,icc3 /* set ICC3.Z */ - ckeq icc3,cc7 - ldd.p @(gr12,gr0),gr8 /* LDD.P/ORCR must be atomic */ - orcr cc7,cc7,cc3 - subcc gr8,gr4,gr0,icc0 - subcc.p gr9,gr5,gr0,icc1 - bnelr icc0,#0 - bnelr icc1,#0 - cstd.p gr10,@(gr12,gr0) ,cc3,#1 - corcc gr29,gr29,gr0 ,cc3,#1 /* clear ICC3.Z if store happens */ - beq icc3,#0,0b - bralr - - .size __cmpxchg_64, .-__cmpxchg_64 - diff --git a/arch/frv/lib/cache.S b/arch/frv/lib/cache.S deleted file mode 100644 index 0c4fb204911b..000000000000 --- a/arch/frv/lib/cache.S +++ /dev/null @@ -1,98 +0,0 @@ -/* cache.S: cache management routines - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/spr-regs.h> -#include <asm/cache.h> - - .text - .p2align 4 - -############################################################################### -# -# Write back a range of dcache -# - void frv_dcache_writeback(unsigned long start [GR8], unsigned long size [GR9]) -# -############################################################################### - .globl frv_dcache_writeback - .type frv_dcache_writeback,@function -frv_dcache_writeback: - andi gr8,~(L1_CACHE_BYTES-1),gr8 - -2: dcf @(gr8,gr0) - addi gr8,#L1_CACHE_BYTES,gr8 - cmp gr9,gr8,icc0 - bhi icc0,#2,2b - - membar - bralr - .size frv_dcache_writeback, .-frv_dcache_writeback - -############################################################################## -# -# Invalidate a range of dcache and icache -# - void frv_cache_invalidate(unsigned long start [GR8], unsigned long end [GR9]); -# -############################################################################### - .globl frv_cache_invalidate - .type frv_cache_invalidate,@function -frv_cache_invalidate: - andi gr8,~(L1_CACHE_BYTES-1),gr8 - -2: dci @(gr8,gr0) - ici @(gr8,gr0) - addi gr8,#L1_CACHE_BYTES,gr8 - cmp gr9,gr8,icc0 - bhi icc0,#2,2b - - membar - bralr - .size frv_cache_invalidate, .-frv_cache_invalidate - -############################################################################## -# -# Invalidate a range of icache -# - void frv_icache_invalidate(unsigned long start [GR8], unsigned long end [GR9]); -# -############################################################################### - .globl frv_icache_invalidate - .type frv_icache_invalidate,@function -frv_icache_invalidate: - andi gr8,~(L1_CACHE_BYTES-1),gr8 - -2: ici @(gr8,gr0) - addi gr8,#L1_CACHE_BYTES,gr8 - cmp gr9,gr8,icc0 - bhi icc0,#2,2b - - membar - bralr - .size frv_icache_invalidate, .-frv_icache_invalidate - -############################################################################### -# -# Write back and invalidate a range of dcache and icache -# - void frv_cache_wback_inv(unsigned long start [GR8], unsigned long end [GR9]) -# -############################################################################### - .globl frv_cache_wback_inv - .type frv_cache_wback_inv,@function -frv_cache_wback_inv: - andi gr8,~(L1_CACHE_BYTES-1),gr8 - -2: dcf @(gr8,gr0) - ici @(gr8,gr0) - addi gr8,#L1_CACHE_BYTES,gr8 - cmp gr9,gr8,icc0 - bhi icc0,#2,2b - - membar - bralr - .size frv_cache_wback_inv, .-frv_cache_wback_inv diff --git a/arch/frv/lib/checksum.c b/arch/frv/lib/checksum.c deleted file mode 100644 index 44e16d59bc10..000000000000 --- a/arch/frv/lib/checksum.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * INET An implementation of the TCP/IP protocol suite for the LINUX - * operating system. INET is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * IP/TCP/UDP checksumming routines - * - * Authors: Jorge Cwik, <jorge@laser.satlink.net> - * Arnt Gulbrandsen, <agulbra@nvg.unit.no> - * Tom May, <ftom@netcom.com> - * Andreas Schwab, <schwab@issan.informatik.uni-dortmund.de> - * Lots of code moved from tcp.c and ip.c; see those files - * for more names. - * - * 03/02/96 Jes Sorensen, Andreas Schwab, Roman Hodek: - * Fixed some nasty bugs, causing some horrible crashes. - * A: At some points, the sum (%0) was used as - * length-counter instead of the length counter - * (%1). Thanks to Roman Hodek for pointing this out. - * B: GCC seems to mess up if one uses too many - * data-registers to hold input values and one tries to - * specify d0 and d1 as scratch registers. Letting gcc choose these - * registers itself solves the problem. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Revised by Kenneth Albanowski for m68knommu. Basic problem: unaligned access kills, so most - of the assembly has to go. */ - -#include <net/checksum.h> -#include <linux/module.h> - -static inline unsigned short from32to16(unsigned long x) -{ - /* add up 16-bit and 16-bit for 16+c bit */ - x = (x & 0xffff) + (x >> 16); - /* add up carry.. */ - x = (x & 0xffff) + (x >> 16); - return x; -} - -static unsigned long do_csum(const unsigned char * buff, int len) -{ - int odd, count; - unsigned long result = 0; - - if (len <= 0) - goto out; - odd = 1 & (unsigned long) buff; - if (odd) { - result = *buff; - len--; - buff++; - } - count = len >> 1; /* nr of 16-bit words.. */ - if (count) { - if (2 & (unsigned long) buff) { - result += *(unsigned short *) buff; - count--; - len -= 2; - buff += 2; - } - count >>= 1; /* nr of 32-bit words.. */ - if (count) { - unsigned long carry = 0; - do { - unsigned long w = *(unsigned long *) buff; - count--; - buff += 4; - result += carry; - result += w; - carry = (w > result); - } while (count); - result += carry; - result = (result & 0xffff) + (result >> 16); - } - if (len & 2) { - result += *(unsigned short *) buff; - buff += 2; - } - } - if (len & 1) - result += (*buff << 8); - result = from32to16(result); - if (odd) - result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); -out: - return result; -} - -/* - * computes the checksum of a memory block at buff, length len, - * and adds in "sum" (32-bit) - * - * returns a 32-bit number suitable for feeding into itself - * or csum_tcpudp_magic - * - * this function must be called with even lengths, except - * for the last fragment, which may be odd - * - * it's best to have buff aligned on a 32-bit boundary - */ -__wsum csum_partial(const void *buff, int len, __wsum sum) -{ - unsigned int result = do_csum(buff, len); - - /* add in old sum, and carry.. */ - result += (__force u32)sum; - if ((__force u32)sum > result) - result += 1; - return (__force __wsum)result; -} - -EXPORT_SYMBOL(csum_partial); - -/* - * this routine is used for miscellaneous IP-like checksums, mainly - * in icmp.c - */ -__sum16 ip_compute_csum(const void *buff, int len) -{ - return (__force __sum16)~do_csum(buff, len); -} - -EXPORT_SYMBOL(ip_compute_csum); - -/* - * copy from fs while checksumming, otherwise like csum_partial - */ -__wsum -csum_partial_copy_from_user(const void __user *src, void *dst, - int len, __wsum sum, int *csum_err) -{ - int rem; - - if (csum_err) - *csum_err = 0; - - rem = copy_from_user(dst, src, len); - if (rem != 0) { - if (csum_err) - *csum_err = -EFAULT; - memset(dst + len - rem, 0, rem); - len = rem; - } - - return csum_partial(dst, len, sum); -} - -EXPORT_SYMBOL(csum_partial_copy_from_user); - -/* - * copy from ds while checksumming, otherwise like csum_partial - */ -__wsum -csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) -{ - memcpy(dst, src, len); - return csum_partial(dst, len, sum); -} - -EXPORT_SYMBOL(csum_partial_copy_nocheck); diff --git a/arch/frv/lib/insl_ns.S b/arch/frv/lib/insl_ns.S deleted file mode 100644 index d1658425a9f7..000000000000 --- a/arch/frv/lib/insl_ns.S +++ /dev/null @@ -1,52 +0,0 @@ -/* insl_ns.S: input array of 4b words from device port without byte swapping - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - - .text - .p2align 4 - -############################################################################### -# -# void __insl_ns(unsigned int port, void *buf, int n) -# -############################################################################### - .globl __insl_ns - .type __insl_ns,@function -__insl_ns: - andicc.p gr9,#3,gr0,icc0 - setlos #4,gr4 - bne icc0,#0,__insl_ns_misaligned - subi gr9,#4,gr9 -0: - ldi.p @(gr8,#0),gr5 - subicc gr10,#1,gr10,icc0 - stu.p gr5,@(gr9,gr4) - bhi icc0,#2,0b - bralr - -__insl_ns_misaligned: - subi.p gr9,#1,gr9 - setlos #1,gr4 -0: - ldi @(gr8,#0),gr5 - - srli gr5,#24,gr6 - stbu.p gr6,@(gr9,gr4) - srli gr5,#16,gr6 - stbu.p gr6,@(gr9,gr4) - srli gr5,#8,gr6 - stbu.p gr6,@(gr9,gr4) - subicc gr10,#1,gr10,icc0 - stbu.p gr5,@(gr9,gr4) - bhi icc0,#2,0b - bralr - - .size __insl_ns, .-__insl_ns diff --git a/arch/frv/lib/insl_sw.S b/arch/frv/lib/insl_sw.S deleted file mode 100644 index 9b5aa95d069b..000000000000 --- a/arch/frv/lib/insl_sw.S +++ /dev/null @@ -1,40 +0,0 @@ -/* insl_sw.S: input array of 4b words from device port with byte swapping - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - - .text - .p2align 4 - -############################################################################### -# -# void __insl_sw(unsigned int port, void *buf, int n) -# -############################################################################### - .globl __insl_sw - .type __insl_sw,@function -__insl_sw: - subi.p gr9,#1,gr9 - setlos #1,gr4 -0: - ldi.p @(gr8,#0),gr5 ; get 0xAABBCCDD - subicc gr10,#1,gr10,icc0 - - stbu.p gr5,@(gr9,gr4) ; write 0xDD - srli gr5,#8,gr5 - stbu.p gr5,@(gr9,gr4) ; write 0xCC - srli gr5,#8,gr5 - stbu.p gr5,@(gr9,gr4) ; write 0xBB - srli gr5,#8,gr5 - stbu.p gr5,@(gr9,gr4) ; write 0xAA - bhi icc0,#2,0b - bralr - - .size __insl_sw, .-__insl_sw diff --git a/arch/frv/lib/memcpy.S b/arch/frv/lib/memcpy.S deleted file mode 100644 index 9c5965273428..000000000000 --- a/arch/frv/lib/memcpy.S +++ /dev/null @@ -1,135 +0,0 @@ -/* memcpy.S: optimised assembly memcpy - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - - .text - .p2align 4 - -############################################################################### -# -# void *memcpy(void *to, const char *from, size_t count) -# -# - NOTE: must not use any stack. exception detection performs function return -# to caller's fixup routine, aborting the remainder of the copy -# -############################################################################### - .globl memcpy,__memcpy_end - .type memcpy,@function -memcpy: - or.p gr8,gr9,gr4 - orcc gr10,gr0,gr0,icc3 - or.p gr10,gr4,gr4 - beqlr icc3,#0 - - # optimise based on best common alignment for to, from & count - andicc.p gr4,#0x0f,gr0,icc0 - setlos #8,gr11 - andicc.p gr4,#0x07,gr0,icc1 - beq icc0,#0,memcpy_16 - andicc.p gr4,#0x03,gr0,icc0 - beq icc1,#0,memcpy_8 - andicc.p gr4,#0x01,gr0,icc1 - beq icc0,#0,memcpy_4 - setlos.p #1,gr11 - beq icc1,#0,memcpy_2 - - # do byte by byte copy - sub.p gr8,gr11,gr3 - sub gr9,gr11,gr9 -0: ldubu.p @(gr9,gr11),gr4 - subicc gr10,#1,gr10,icc0 - stbu.p gr4,@(gr3,gr11) - bne icc0,#2,0b - bralr - - # do halfword by halfword copy -memcpy_2: - setlos #2,gr11 - sub.p gr8,gr11,gr3 - sub gr9,gr11,gr9 -0: lduhu.p @(gr9,gr11),gr4 - subicc gr10,#2,gr10,icc0 - sthu.p gr4,@(gr3,gr11) - bne icc0,#2,0b - bralr - - # do word by word copy -memcpy_4: - setlos #4,gr11 - sub.p gr8,gr11,gr3 - sub gr9,gr11,gr9 -0: ldu.p @(gr9,gr11),gr4 - subicc gr10,#4,gr10,icc0 - stu.p gr4,@(gr3,gr11) - bne icc0,#2,0b - bralr - - # do double-word by double-word copy -memcpy_8: - sub.p gr8,gr11,gr3 - sub gr9,gr11,gr9 -0: lddu.p @(gr9,gr11),gr4 - subicc gr10,#8,gr10,icc0 - stdu.p gr4,@(gr3,gr11) - bne icc0,#2,0b - bralr - - # do quad-word by quad-word copy -memcpy_16: - sub.p gr8,gr11,gr3 - sub gr9,gr11,gr9 -0: lddu @(gr9,gr11),gr4 - lddu.p @(gr9,gr11),gr6 - subicc gr10,#16,gr10,icc0 - stdu gr4,@(gr3,gr11) - stdu.p gr6,@(gr3,gr11) - bne icc0,#2,0b - bralr -__memcpy_end: - - .size memcpy, __memcpy_end-memcpy - -############################################################################### -# -# copy to/from userspace -# - return the number of bytes that could not be copied (0 on complete success) -# -# long __memcpy_user(void *dst, const void *src, size_t count) -# -############################################################################### - .globl __memcpy_user, __memcpy_user_error_lr, __memcpy_user_error_handler - .type __memcpy_user,@function -__memcpy_user: - movsg lr,gr7 - subi.p sp,#8,sp - add gr8,gr10,gr6 ; calculate expected end address - stdi gr6,@(sp,#0) - - # abuse memcpy to do the dirty work - call memcpy -__memcpy_user_error_lr: - ldi.p @(sp,#4),gr7 - setlos #0,gr8 - jmpl.p @(gr7,gr0) - addi sp,#8,sp - - # deal any exception generated by memcpy - # GR8 - memcpy's current dest address - # GR11 - memset's step value (index register for store insns) -__memcpy_user_error_handler: - lddi.p @(sp,#0),gr4 ; load GR4 with dst+count, GR5 with ret addr - add gr11,gr3,gr7 - sub.p gr4,gr7,gr8 - - addi sp,#8,sp - jmpl @(gr5,gr0) - - .size __memcpy_user, .-__memcpy_user diff --git a/arch/frv/lib/memset.S b/arch/frv/lib/memset.S deleted file mode 100644 index 55a35263cbe3..000000000000 --- a/arch/frv/lib/memset.S +++ /dev/null @@ -1,182 +0,0 @@ -/* memset.S: optimised assembly memset - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - - .text - .p2align 4 - -############################################################################### -# -# void *memset(void *p, char ch, size_t count) -# -# - NOTE: must not use any stack. exception detection performs function return -# to caller's fixup routine, aborting the remainder of the set -# GR4, GR7, GR8, and GR11 must be managed -# -############################################################################### - .globl memset,__memset_end - .type memset,@function -memset: - orcc.p gr10,gr0,gr5,icc3 ; GR5 = count - andi gr9,#0xff,gr9 - or.p gr8,gr0,gr4 ; GR4 = address - beqlr icc3,#0 - - # conditionally write a byte to 2b-align the address - setlos.p #1,gr6 - andicc gr4,#1,gr0,icc0 - ckne icc0,cc7 - cstb.p gr9,@(gr4,gr0) ,cc7,#1 - csubcc gr5,gr6,gr5 ,cc7,#1 ; also set ICC3 - cadd.p gr4,gr6,gr4 ,cc7,#1 - beqlr icc3,#0 - - # conditionally write a word to 4b-align the address - andicc.p gr4,#2,gr0,icc0 - subicc gr5,#2,gr0,icc1 - setlos.p #2,gr6 - ckne icc0,cc7 - slli.p gr9,#8,gr12 ; need to double up the pattern - cknc icc1,cc5 - or.p gr9,gr12,gr12 - andcr cc7,cc5,cc7 - - csth.p gr12,@(gr4,gr0) ,cc7,#1 - csubcc gr5,gr6,gr5 ,cc7,#1 ; also set ICC3 - cadd.p gr4,gr6,gr4 ,cc7,#1 - beqlr icc3,#0 - - # conditionally write a dword to 8b-align the address - andicc.p gr4,#4,gr0,icc0 - subicc gr5,#4,gr0,icc1 - setlos.p #4,gr6 - ckne icc0,cc7 - slli.p gr12,#16,gr13 ; need to quadruple-up the pattern - cknc icc1,cc5 - or.p gr13,gr12,gr12 - andcr cc7,cc5,cc7 - - cst.p gr12,@(gr4,gr0) ,cc7,#1 - csubcc gr5,gr6,gr5 ,cc7,#1 ; also set ICC3 - cadd.p gr4,gr6,gr4 ,cc7,#1 - beqlr icc3,#0 - - or.p gr12,gr12,gr13 ; need to octuple-up the pattern - - # the address is now 8b-aligned - loop around writing 64b chunks - setlos #8,gr7 - subi.p gr4,#8,gr4 ; store with update index does weird stuff - setlos #64,gr6 - - subicc gr5,#64,gr0,icc0 -0: cknc icc0,cc7 - cstdu gr12,@(gr4,gr7) ,cc7,#1 - cstdu gr12,@(gr4,gr7) ,cc7,#1 - cstdu gr12,@(gr4,gr7) ,cc7,#1 - cstdu gr12,@(gr4,gr7) ,cc7,#1 - cstdu gr12,@(gr4,gr7) ,cc7,#1 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - csubcc gr5,gr6,gr5 ,cc7,#1 ; also set ICC3 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - subicc gr5,#64,gr0,icc0 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - beqlr icc3,#0 - bnc icc0,#2,0b - - # now do 32-byte remnant - subicc.p gr5,#32,gr0,icc0 - setlos #32,gr6 - cknc icc0,cc7 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - csubcc gr5,gr6,gr5 ,cc7,#1 ; also set ICC3 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - setlos #16,gr6 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - subicc gr5,#16,gr0,icc0 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - beqlr icc3,#0 - - # now do 16-byte remnant - cknc icc0,cc7 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - csubcc gr5,gr6,gr5 ,cc7,#1 ; also set ICC3 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - beqlr icc3,#0 - - # now do 8-byte remnant - subicc gr5,#8,gr0,icc1 - cknc icc1,cc7 - cstdu.p gr12,@(gr4,gr7) ,cc7,#1 - csubcc gr5,gr7,gr5 ,cc7,#1 ; also set ICC3 - setlos.p #4,gr7 - beqlr icc3,#0 - - # now do 4-byte remnant - subicc gr5,#4,gr0,icc0 - addi.p gr4,#4,gr4 - cknc icc0,cc7 - cstu.p gr12,@(gr4,gr7) ,cc7,#1 - csubcc gr5,gr7,gr5 ,cc7,#1 ; also set ICC3 - subicc.p gr5,#2,gr0,icc1 - beqlr icc3,#0 - - # now do 2-byte remnant - setlos #2,gr7 - addi.p gr4,#2,gr4 - cknc icc1,cc7 - csthu.p gr12,@(gr4,gr7) ,cc7,#1 - csubcc gr5,gr7,gr5 ,cc7,#1 ; also set ICC3 - subicc.p gr5,#1,gr0,icc0 - beqlr icc3,#0 - - # now do 1-byte remnant - setlos #0,gr7 - addi.p gr4,#2,gr4 - cknc icc0,cc7 - cstb.p gr12,@(gr4,gr0) ,cc7,#1 - bralr -__memset_end: - - .size memset, __memset_end-memset - -############################################################################### -# -# clear memory in userspace -# - return the number of bytes that could not be cleared (0 on complete success) -# -# long __memset_user(void *p, size_t count) -# -############################################################################### - .globl __memset_user, __memset_user_error_lr, __memset_user_error_handler - .type __memset_user,@function -__memset_user: - movsg lr,gr11 - - # abuse memset to do the dirty work - or.p gr9,gr9,gr10 - setlos #0,gr9 - call memset -__memset_user_error_lr: - jmpl.p @(gr11,gr0) - setlos #0,gr8 - - # deal any exception generated by memset - # GR4 - memset's address tracking pointer - # GR7 - memset's step value (index register for store insns) - # GR8 - memset's original start address - # GR10 - memset's original count -__memset_user_error_handler: - add.p gr4,gr7,gr4 - add gr8,gr10,gr8 - jmpl.p @(gr11,gr0) - sub gr8,gr4,gr8 ; we return the amount left uncleared - - .size __memset_user, .-__memset_user diff --git a/arch/frv/lib/outsl_ns.S b/arch/frv/lib/outsl_ns.S deleted file mode 100644 index 4cd4c46a6966..000000000000 --- a/arch/frv/lib/outsl_ns.S +++ /dev/null @@ -1,59 +0,0 @@ -/* outsl_ns.S: output array of 4b words to device without byte swapping - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - - .text - .p2align 4 - -############################################################################### -# -# void __outsl_ns(unsigned int port, const void *buf, int n) -# -############################################################################### - .globl __outsl_ns - .type __outsl_ns,@function -__outsl_ns: - andicc.p gr9,#3,gr0,icc0 - setlos #4,gr4 - bne icc0,#0,__outsl_ns_misaligned - subi gr9,#4,gr9 -0: - ldu.p @(gr9,gr4),gr5 - subicc gr10,#1,gr10,icc0 - sti.p gr5,@(gr8,#0) - bhi icc0,#2,0b - - membar - bralr - -__outsl_ns_misaligned: - subi.p gr9,#1,gr9 - setlos #1,gr4 -0: - ldubu @(gr9,gr4),gr5 - ldubu.p @(gr9,gr4),gr6 - slli gr5,#8,gr5 - ldubu.p @(gr9,gr4),gr7 - or gr5,gr6,gr5 - ldubu.p @(gr9,gr4),gr6 - slli gr5,#16,gr5 - slli.p gr7,#8,gr7 - or gr5,gr6,gr5 - subicc.p gr10,#1,gr10,icc0 - or gr5,gr7,gr5 - - sti.p gr5,@(gr8,#0) - bhi icc0,#2,0b - - membar - bralr - - .size __outsl_ns, .-__outsl_ns diff --git a/arch/frv/lib/outsl_sw.S b/arch/frv/lib/outsl_sw.S deleted file mode 100644 index 7eb56d35a956..000000000000 --- a/arch/frv/lib/outsl_sw.S +++ /dev/null @@ -1,45 +0,0 @@ -/* outsl_ns.S: output array of 4b words to device with byte swapping - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - - - .text - .p2align 4 - -############################################################################### -# -# void __outsl_sw(unsigned int port, const void *buf, int n) -# -############################################################################### - .globl __outsl_sw - .type __outsl_sw,@function -__outsl_sw: - subi.p gr9,#1,gr9 - setlos #1,gr4 -0: - ldubu @(gr9,gr4),gr5 - ldubu @(gr9,gr4),gr6 - slli gr6,#8,gr6 - ldubu.p @(gr9,gr4),gr7 - or gr5,gr6,gr5 - ldubu.p @(gr9,gr4),gr6 - slli gr7,#16,gr7 - slli.p gr6,#24,gr6 - or gr5,gr7,gr5 - subicc.p gr10,#1,gr10,icc0 - or gr5,gr6,gr5 - - sti.p gr5,@(gr8,#0) - bhi icc0,#2,0b - - membar - bralr - - .size __outsl_sw, .-__outsl_sw diff --git a/arch/frv/mb93090-mb00/Makefile b/arch/frv/mb93090-mb00/Makefile deleted file mode 100644 index bcb03ebb3583..000000000000 --- a/arch/frv/mb93090-mb00/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the MB93090-MB00 motherboard stuff -# - -ifeq "$(CONFIG_PCI)" "y" -obj-y := pci-frv.o pci-irq.o pci-vdk.o - -ifeq "$(CONFIG_MMU)" "y" -obj-y += pci-dma.o -else -obj-y += pci-dma-nommu.o -endif -endif - -obj-$(CONFIG_MTD) += flash.o diff --git a/arch/frv/mb93090-mb00/flash.c b/arch/frv/mb93090-mb00/flash.c deleted file mode 100644 index e1cf802d1639..000000000000 --- a/arch/frv/mb93090-mb00/flash.c +++ /dev/null @@ -1,90 +0,0 @@ -/* Flash mappings for the MB93090-MB00 motherboard - * - * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public Licence - * as published by the Free Software Foundation; either version - * 2 of the Licence, or (at your option) any later version. - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> - -#define MB93090_BOOTROM_ADDR 0xFF000000 /* Boot ROM */ -#define MB93090_BOOTROM_SIZE (2 * 1024 * 1024) -#define MB93090_USERROM_ADDR 0xFF200000 /* User ROM */ -#define MB93090_USERROM_SIZE (2 * 1024 * 1024) - -/* - * default MTD partition table for both main flash devices, expected to be - * overridden by RedBoot - */ -static struct mtd_partition mb93090_partitions[] = { - { - .name = "Filesystem", - .size = MTDPART_SIZ_FULL, - .offset = 0, - } -}; - -/* - * Definition of the MB93090 Boot ROM (on the CPU card) - */ -static struct physmap_flash_data mb93090_bootrom_data = { - .width = 2, - .nr_parts = 2, - .parts = mb93090_partitions, -}; - -static struct resource mb93090_bootrom_resource = { - .start = MB93090_BOOTROM_ADDR, - .end = MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mb93090_bootrom = { - .name = "physmap-flash", - .id = 0, - .dev.platform_data = &mb93090_bootrom_data, - .num_resources = 1, - .resource = &mb93090_bootrom_resource, -}; - -/* - * Definition of the MB93090 User ROM definition (on the motherboard) - */ -static struct physmap_flash_data mb93090_userrom_data = { - .width = 2, - .nr_parts = 2, - .parts = mb93090_partitions, -}; - -static struct resource mb93090_userrom_resource = { - .start = MB93090_USERROM_ADDR, - .end = MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device mb93090_userrom = { - .name = "physmap-flash", - .id = 1, - .dev.platform_data = &mb93090_userrom_data, - .num_resources = 1, - .resource = &mb93090_userrom_resource, -}; - -/* - * register the MB93090 flashes - */ -static int __init mb93090_mtd_init(void) -{ - platform_device_register(&mb93090_bootrom); - platform_device_register(&mb93090_userrom); - return 0; -} - -module_init(mb93090_mtd_init); diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c deleted file mode 100644 index 4a96de7f0af4..000000000000 --- a/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ /dev/null @@ -1,176 +0,0 @@ -/* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@infradead.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/export.h> -#include <linux/dma-mapping.h> -#include <linux/list.h> -#include <linux/pci.h> -#include <asm/io.h> - -#if 1 -#define DMA_SRAM_START dma_coherent_mem_start -#define DMA_SRAM_END dma_coherent_mem_end -#else // Use video RAM on Matrox -#define DMA_SRAM_START 0xe8900000 -#define DMA_SRAM_END 0xe8a00000 -#endif - -struct dma_alloc_record { - struct list_head list; - unsigned long ofs; - unsigned long len; -}; - -static DEFINE_SPINLOCK(dma_alloc_lock); -static LIST_HEAD(dma_alloc_list); - -static void *frv_dma_alloc(struct device *hwdev, size_t size, dma_addr_t *dma_handle, - gfp_t gfp, unsigned long attrs) -{ - struct dma_alloc_record *new; - struct list_head *this = &dma_alloc_list; - unsigned long flags; - unsigned long start = DMA_SRAM_START; - unsigned long end; - - if (!DMA_SRAM_START) { - printk("%s called without any DMA area reserved!\n", __func__); - return NULL; - } - - new = kmalloc(sizeof (*new), GFP_ATOMIC); - if (!new) - return NULL; - - /* Round up to a reasonable alignment */ - new->len = (size + 31) & ~31; - - spin_lock_irqsave(&dma_alloc_lock, flags); - - list_for_each (this, &dma_alloc_list) { - struct dma_alloc_record *this_r = list_entry(this, struct dma_alloc_record, list); - end = this_r->ofs; - - if (end - start >= size) - goto gotone; - - start = this_r->ofs + this_r->len; - } - /* Reached end of list. */ - end = DMA_SRAM_END; - this = &dma_alloc_list; - - if (end - start >= size) { - gotone: - new->ofs = start; - list_add_tail(&new->list, this); - spin_unlock_irqrestore(&dma_alloc_lock, flags); - - *dma_handle = start; - return (void *)start; - } - - kfree(new); - spin_unlock_irqrestore(&dma_alloc_lock, flags); - return NULL; -} - -static void frv_dma_free(struct device *hwdev, size_t size, void *vaddr, - dma_addr_t dma_handle, unsigned long attrs) -{ - struct dma_alloc_record *rec; - unsigned long flags; - - spin_lock_irqsave(&dma_alloc_lock, flags); - - list_for_each_entry(rec, &dma_alloc_list, list) { - if (rec->ofs == dma_handle) { - list_del(&rec->list); - kfree(rec); - spin_unlock_irqrestore(&dma_alloc_lock, flags); - return; - } - } - spin_unlock_irqrestore(&dma_alloc_lock, flags); - BUG(); -} - -static int frv_dma_map_sg(struct device *dev, struct scatterlist *sglist, - int nents, enum dma_data_direction direction, - unsigned long attrs) -{ - struct scatterlist *sg; - int i; - - BUG_ON(direction == DMA_NONE); - - if (attrs & DMA_ATTR_SKIP_CPU_SYNC) - return nents; - - for_each_sg(sglist, sg, nents, i) { - frv_cache_wback_inv(sg_dma_address(sg), - sg_dma_address(sg) + sg_dma_len(sg)); - } - - return nents; -} - -static dma_addr_t frv_dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, unsigned long attrs) -{ - BUG_ON(direction == DMA_NONE); - - if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - flush_dcache_page(page); - - return (dma_addr_t) page_to_phys(page) + offset; -} - -static void frv_dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -static void frv_dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - - -static int frv_dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - return 1; -} - -const struct dma_map_ops frv_dma_ops = { - .alloc = frv_dma_alloc, - .free = frv_dma_free, - .map_page = frv_dma_map_page, - .map_sg = frv_dma_map_sg, - .sync_single_for_device = frv_dma_sync_single_for_device, - .sync_sg_for_device = frv_dma_sync_sg_for_device, - .dma_supported = frv_dma_supported, -}; -EXPORT_SYMBOL(frv_dma_ops); diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c deleted file mode 100644 index e7130abc0dae..000000000000 --- a/arch/frv/mb93090-mb00/pci-dma.c +++ /dev/null @@ -1,118 +0,0 @@ -/* pci-dma.c: Dynamic DMA mapping support for the FRV CPUs that have MMUs - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/types.h> -#include <linux/dma-mapping.h> -#include <linux/list.h> -#include <linux/pci.h> -#include <linux/export.h> -#include <linux/highmem.h> -#include <linux/scatterlist.h> -#include <asm/io.h> - -static void *frv_dma_alloc(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs) -{ - void *ret; - - ret = consistent_alloc(gfp, size, dma_handle); - if (ret) - memset(ret, 0, size); - - return ret; -} - -static void frv_dma_free(struct device *hwdev, size_t size, void *vaddr, - dma_addr_t dma_handle, unsigned long attrs) -{ - consistent_free(vaddr); -} - -static int frv_dma_map_sg(struct device *dev, struct scatterlist *sglist, - int nents, enum dma_data_direction direction, - unsigned long attrs) -{ - struct scatterlist *sg; - unsigned long dampr2; - void *vaddr; - int i; - - BUG_ON(direction == DMA_NONE); - - if (attrs & DMA_ATTR_SKIP_CPU_SYNC) - return nents; - - dampr2 = __get_DAMPR(2); - - for_each_sg(sglist, sg, nents, i) { - vaddr = kmap_atomic_primary(sg_page(sg)); - - frv_dcache_writeback((unsigned long) vaddr, - (unsigned long) vaddr + PAGE_SIZE); - - } - - kunmap_atomic_primary(vaddr); - if (dampr2) { - __set_DAMPR(2, dampr2); - __set_IAMPR(2, dampr2); - } - - return nents; -} - -static dma_addr_t frv_dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction, unsigned long attrs) -{ - if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC)) - flush_dcache_page(page); - - return (dma_addr_t) page_to_phys(page) + offset; -} - -static void frv_dma_sync_single_for_device(struct device *dev, - dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - -static void frv_dma_sync_sg_for_device(struct device *dev, - struct scatterlist *sg, int nelems, - enum dma_data_direction direction) -{ - flush_write_buffers(); -} - - -static int frv_dma_supported(struct device *dev, u64 mask) -{ - /* - * we fall back to GFP_DMA when the mask isn't all 1s, - * so we can't guarantee allocations that must be - * within a tighter range than GFP_DMA.. - */ - if (mask < 0x00ffffff) - return 0; - return 1; -} - -const struct dma_map_ops frv_dma_ops = { - .alloc = frv_dma_alloc, - .free = frv_dma_free, - .map_page = frv_dma_map_page, - .map_sg = frv_dma_map_sg, - .sync_single_for_device = frv_dma_sync_single_for_device, - .sync_sg_for_device = frv_dma_sync_sg_for_device, - .dma_supported = frv_dma_supported, -}; -EXPORT_SYMBOL(frv_dma_ops); diff --git a/arch/frv/mb93090-mb00/pci-frv.c b/arch/frv/mb93090-mb00/pci-frv.c deleted file mode 100644 index c452ddb5620f..000000000000 --- a/arch/frv/mb93090-mb00/pci-frv.c +++ /dev/null @@ -1,193 +0,0 @@ -/* pci-frv.c: low-level PCI access routines - * - * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from the i386 equivalent stuff - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/errno.h> - -#include "pci-frv.h" - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - * - * Why? Because some silly external IO cards only decode - * the low 10 bits of the IO address. The 0x00-0xff region - * is reserved for motherboard devices that decode all 16 - * bits, so it's ok to allocate at, say, 0x2800-0x28ff, - * but we want to try to avoid allocating at 0x2900-0x2bff - * which might have be mirrored at 0x0100-0x03ff.. - */ -resource_size_t -pcibios_align_resource(void *data, const struct resource *res, - resource_size_t size, resource_size_t align) -{ - resource_size_t start = res->start; - - if ((res->flags & IORESOURCE_IO) && (start & 0x300)) - start = (start + 0x3ff) & ~0x3ff; - - return start; -} - - -/* - * Handle resources of PCI devices. If the world were perfect, we could - * just allocate all the resource regions and do nothing more. It isn't. - * On the other hand, we cannot just re-allocate all devices, as it would - * require us to know lots of host bridge internals. So we attempt to - * keep as much of the original configuration as possible, but tweak it - * when it's found to be wrong. - * - * Known BIOS problems we have to work around: - * - I/O or memory regions not configured - * - regions configured, but not enabled in the command register - * - bogus I/O addresses above 64K used - * - expansion ROMs left enabled (this may sound harmless, but given - * the fact the PCI specs explicitly allow address decoders to be - * shared between expansion ROMs and other resource regions, it's - * at least dangerous) - * - * Our solution: - * (1) Allocate resources for all buses behind PCI-to-PCI bridges. - * This gives us fixed barriers on where we can allocate. - * (2) Allocate resources for all enabled devices. If there is - * a collision, just mark the resource as unallocated. Also - * disable expansion ROMs during this step. - * (3) Try to allocate resources for disabled devices. If the - * resources were assigned correctly, everything goes well, - * if they weren't, they won't disturb allocation of other - * resources. - * (4) Assign new addresses to resources which were either - * not configured at all or misconfigured. If explicitly - * requested by the user, configure expansion ROM address - * as well. - */ - -static void __init pcibios_allocate_bus_resources(struct list_head *bus_list) -{ - struct list_head *ln; - struct pci_bus *bus; - struct pci_dev *dev; - int idx; - struct resource *r; - - /* Depth-First Search on bus tree */ - for (ln=bus_list->next; ln != bus_list; ln=ln->next) { - bus = list_entry(ln, struct pci_bus, node); - if ((dev = bus->self)) { - for (idx = PCI_BRIDGE_RESOURCES; idx < PCI_NUM_RESOURCES; idx++) { - r = &dev->resource[idx]; - if (!r->start) - continue; - pci_claim_bridge_resource(dev, idx); - } - } - pcibios_allocate_bus_resources(&bus->children); - } -} - -static void __init pcibios_allocate_resources(int pass) -{ - struct pci_dev *dev = NULL; - int idx, disabled; - u16 command; - struct resource *r; - - for_each_pci_dev(dev) { - pci_read_config_word(dev, PCI_COMMAND, &command); - for(idx = 0; idx < 6; idx++) { - r = &dev->resource[idx]; - if (r->parent) /* Already allocated */ - continue; - if (!r->start) /* Address not assigned at all */ - continue; - if (r->flags & IORESOURCE_IO) - disabled = !(command & PCI_COMMAND_IO); - else - disabled = !(command & PCI_COMMAND_MEMORY); - if (pass == disabled) { - DBG("PCI: Resource %08lx-%08lx (f=%lx, d=%d, p=%d)\n", - r->start, r->end, r->flags, disabled, pass); - if (pci_claim_resource(dev, idx) < 0) { - /* We'll assign a new address later */ - r->end -= r->start; - r->start = 0; - } - } - } - if (!pass) { - r = &dev->resource[PCI_ROM_RESOURCE]; - if (r->flags & IORESOURCE_ROM_ENABLE) { - /* Turn the ROM off, leave the resource region, but keep it unregistered. */ - u32 reg; - DBG("PCI: Switching off ROM of %s\n", pci_name(dev)); - r->flags &= ~IORESOURCE_ROM_ENABLE; - pci_read_config_dword(dev, dev->rom_base_reg, ®); - pci_write_config_dword(dev, dev->rom_base_reg, reg & ~PCI_ROM_ADDRESS_ENABLE); - } - } - } -} - -static void __init pcibios_assign_resources(void) -{ - struct pci_dev *dev = NULL; - int idx, err; - struct resource *r; - - for_each_pci_dev(dev) { - int class = dev->class >> 8; - - /* Don't touch classless devices and host bridges */ - if (!class || class == PCI_CLASS_BRIDGE_HOST) - continue; - - for(idx=0; idx<6; idx++) { - r = &dev->resource[idx]; - - /* - * Don't touch IDE controllers and I/O ports of video cards! - */ - if ((class == PCI_CLASS_STORAGE_IDE && idx < 4) || - (class == PCI_CLASS_DISPLAY_VGA && (r->flags & IORESOURCE_IO))) - continue; - - /* - * We shall assign a new address to this resource, either because - * the BIOS forgot to do so or because we have decided the old - * address was unusable for some reason. - */ - if (!r->start && r->end) { - err = pci_assign_resource(dev, idx); - if (err) - dev_err(&dev->dev, - "Failed to assign new address to %d\n", - idx); - } - } - } -} - -void __init pcibios_resource_survey(void) -{ - DBG("PCI: Allocating resources\n"); - pcibios_allocate_bus_resources(&pci_root_buses); - pcibios_allocate_resources(0); - pcibios_allocate_resources(1); - pcibios_assign_resources(); -} diff --git a/arch/frv/mb93090-mb00/pci-frv.h b/arch/frv/mb93090-mb00/pci-frv.h deleted file mode 100644 index 41fbb6bae558..000000000000 --- a/arch/frv/mb93090-mb00/pci-frv.h +++ /dev/null @@ -1,33 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Low-Level PCI Access for FRV machines. - * - * (c) 1999 Martin Mares <mj@ucw.cz> - */ - -#include <asm/sections.h> - -#undef DEBUG - -#ifdef DEBUG -#define DBG(x...) printk(x) -#else -#define DBG(x...) -#endif - -extern unsigned int __nongpreldata pci_probe; - -/* pci-frv.c */ - -void pcibios_resource_survey(void); - -/* pci-vdk.c */ - -extern struct pci_ops *__nongpreldata pci_root_ops; - -/* pci-irq.c */ -extern unsigned int pcibios_irq_mask; - -void pcibios_irq_init(void); -void pcibios_fixup_irqs(void); -void pcibios_enable_irq(struct pci_dev *dev); diff --git a/arch/frv/mb93090-mb00/pci-irq.c b/arch/frv/mb93090-mb00/pci-irq.c deleted file mode 100644 index a40aa8663056..000000000000 --- a/arch/frv/mb93090-mb00/pci-irq.c +++ /dev/null @@ -1,62 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* pci-irq.c: PCI IRQ routing on the FRV motherboard - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * derived from: arch/i386/kernel/pci-irq.c: (c) 1999--2000 Martin Mares <mj@suse.cz> - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> - -#include <asm/io.h> -#include <asm/smp.h> - -#include "pci-frv.h" - -/* - * DEVICE DEVNO INT#A INT#B INT#C INT#D - * ======= ======= ======= ======= ======= ======= - * MB86943 0 fpga.10 - - - - * RTL8029 16 fpga.12 - - - - * SLOT 1 19 fpga.6 fpga.5 fpga.4 fpga.3 - * SLOT 2 18 fpga.5 fpga.4 fpga.3 fpga.6 - * SLOT 3 17 fpga.4 fpga.3 fpga.6 fpga.5 - * - */ - -static const uint8_t __initconst pci_bus0_irq_routing[32][4] = { - [0 ] = { IRQ_FPGA_MB86943_PCI_INTA }, - [16] = { IRQ_FPGA_RTL8029_INTA }, - [17] = { IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB }, - [18] = { IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD, IRQ_FPGA_PCI_INTA }, - [19] = { IRQ_FPGA_PCI_INTA, IRQ_FPGA_PCI_INTB, IRQ_FPGA_PCI_INTC, IRQ_FPGA_PCI_INTD }, -}; - -void __init pcibios_irq_init(void) -{ -} - -void __init pcibios_fixup_irqs(void) -{ - struct pci_dev *dev = NULL; - uint8_t line, pin; - - for_each_pci_dev(dev) { - pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); - if (pin) { - dev->irq = pci_bus0_irq_routing[PCI_SLOT(dev->devfn)][pin - 1]; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line); - } -} - -void pcibios_enable_irq(struct pci_dev *dev) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); -} diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c deleted file mode 100644 index f211839e2cae..000000000000 --- a/arch/frv/mb93090-mb00/pci-vdk.c +++ /dev/null @@ -1,419 +0,0 @@ -/* pci-vdk.c: MB93090-MB00 (VDK) PCI support - * - * Copyright (C) 2003, 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/delay.h> - -#include <asm/segment.h> -#include <asm/io.h> -#include <asm/mb-regs.h> -#include <asm/mb86943a.h> -#include "pci-frv.h" - -unsigned int __nongpreldata pci_probe = 1; - -struct pci_ops *__nongpreldata pci_root_ops; - -/* - * The accessible PCI window does not cover the entire CPU address space, but - * there are devices we want to access outside of that window, so we need to - * insert specific PCI bus resources instead of using the platform-level bus - * resources directly for the PCI root bus. - * - * These are configured and inserted by pcibios_init() and are attached to the - * root bus by pcibios_fixup_bus(). - */ -static struct resource pci_ioport_resource = { - .name = "PCI IO", - .start = 0, - .end = IO_SPACE_LIMIT, - .flags = IORESOURCE_IO, -}; - -static struct resource pci_iomem_resource = { - .name = "PCI mem", - .start = 0, - .end = -1, - .flags = IORESOURCE_MEM, -}; - -/* - * Functions for accessing PCI configuration space - */ - -#define CONFIG_CMD(bus, dev, where) \ - (0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3)) - -#define __set_PciCfgAddr(A) writel((A), (volatile void __iomem *) __region_CS1 + 0x80) - -#define __get_PciCfgDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 3)) -#define __get_PciCfgDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x88 + ((A) & 2)) -#define __get_PciCfgDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x88) - -#define __set_PciCfgDataB(A,V) \ - writeb((V), (volatile void __iomem *) __region_CS1 + 0x88 + (3 - ((A) & 3))) - -#define __set_PciCfgDataW(A,V) \ - writew((V), (volatile void __iomem *) __region_CS1 + 0x88 + (2 - ((A) & 2))) - -#define __set_PciCfgDataL(A,V) \ - writel((V), (volatile void __iomem *) __region_CS1 + 0x88) - -#define __get_PciBridgeDataB(A) readb((volatile void __iomem *) __region_CS1 + 0x800 + (A)) -#define __get_PciBridgeDataW(A) readw((volatile void __iomem *) __region_CS1 + 0x800 + (A)) -#define __get_PciBridgeDataL(A) readl((volatile void __iomem *) __region_CS1 + 0x800 + (A)) - -#define __set_PciBridgeDataB(A,V) writeb((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A)) -#define __set_PciBridgeDataW(A,V) writew((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A)) -#define __set_PciBridgeDataL(A,V) writel((V), (volatile void __iomem *) __region_CS1 + 0x800 + (A)) - -static inline int __query(const struct pci_dev *dev) -{ -// return dev->bus->number==0 && (dev->devfn==PCI_DEVFN(0,0)); -// return dev->bus->number==1; -// return dev->bus->number==0 && -// (dev->devfn==PCI_DEVFN(2,0) || dev->devfn==PCI_DEVFN(3,0)); - return 0; -} - -/*****************************************************************************/ -/* - * - */ -static int pci_frv_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, - u32 *val) -{ - u32 _value; - - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - _value = __get_PciBridgeDataL(where & ~3); - } - else { - __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where)); - _value = __get_PciCfgDataL(where & ~3); - } - - switch (size) { - case 1: - _value = _value >> ((where & 3) * 8); - break; - - case 2: - _value = _value >> ((where & 2) * 8); - break; - - case 4: - break; - - default: - BUG(); - } - - *val = _value; - return PCIBIOS_SUCCESSFUL; -} - -static int pci_frv_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, - u32 value) -{ - switch (size) { - case 1: - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - __set_PciBridgeDataB(where, value); - } - else { - __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where)); - __set_PciCfgDataB(where, value); - } - break; - - case 2: - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - __set_PciBridgeDataW(where, value); - } - else { - __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where)); - __set_PciCfgDataW(where, value); - } - break; - - case 4: - if (bus->number == 0 && devfn == PCI_DEVFN(0, 0)) { - __set_PciBridgeDataL(where, value); - } - else { - __set_PciCfgAddr(CONFIG_CMD(bus, devfn, where)); - __set_PciCfgDataL(where, value); - } - break; - - default: - BUG(); - } - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops pci_direct_frv = { - .read = pci_frv_read_config, - .write = pci_frv_write_config, -}; - -/* - * Before we decide to use direct hardware access mechanisms, we try to do some - * trivial checks to ensure it at least _seems_ to be working -- we just test - * whether bus 00 contains a host bridge (this is similar to checking - * techniques used in XFree86, but ours should be more reliable since we - * attempt to make use of direct access hints provided by the PCI BIOS). - * - * This should be close to trivial, but it isn't, because there are buggy - * chipsets (yes, you guessed it, by Intel and Compaq) that have no class ID. - */ -static int __init pci_sanity_check(struct pci_ops *o) -{ - struct pci_bus bus; /* Fake bus and device */ - u32 id; - - bus.number = 0; - - if (o->read(&bus, 0, PCI_VENDOR_ID, 4, &id) == PCIBIOS_SUCCESSFUL) { - printk("PCI: VDK Bridge device:vendor: %08x\n", id); - if (id == 0x200e10cf) - return 1; - } - - printk("PCI: VDK Bridge: Sanity check failed\n"); - return 0; -} - -static struct pci_ops * __init pci_check_direct(void) -{ - unsigned long flags; - - local_irq_save(flags); - - /* check if access works */ - if (pci_sanity_check(&pci_direct_frv)) { - local_irq_restore(flags); - printk("PCI: Using configuration frv\n"); -// request_mem_region(0xBE040000, 256, "FRV bridge"); -// request_mem_region(0xBFFFFFF4, 12, "PCI frv"); - return &pci_direct_frv; - } - - local_irq_restore(flags); - return NULL; -} - -/* - * Exceptions for specific devices. Usually work-arounds for fatal design flaws. - */ - -static void __init pci_fixup_umc_ide(struct pci_dev *d) -{ - /* - * UM8886BF IDE controller sets region type bits incorrectly, - * therefore they look like memory despite of them being I/O. - */ - int i; - - printk("PCI: Fixing base address flags for device %s\n", pci_name(d)); - for(i=0; i<4; i++) - d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; -} - -static void pci_fixup_ide_bases(struct pci_dev *d) -{ - int i; - - /* - * PCI IDE controllers use non-standard I/O port decoding, respect it. - */ - if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) - return; - printk("PCI: IDE base address fixup for %s\n", pci_name(d)); - for(i=0; i<4; i++) { - struct resource *r = &d->resource[i]; - if ((r->start & ~0x80) == 0x374) { - r->start |= 2; - r->end = r->start; - } - } -} - -static void pci_fixup_ide_trash(struct pci_dev *d) -{ - int i; - - /* - * There exist PCI IDE controllers which have utter garbage - * in first four base registers. Ignore that. - */ - printk("PCI: IDE base address trash cleared for %s\n", pci_name(d)); - for(i=0; i<4; i++) - d->resource[i].start = d->resource[i].end = d->resource[i].flags = 0; -} - -static void pci_fixup_latency(struct pci_dev *d) -{ - /* - * SiS 5597 and 5598 chipsets require latency timer set to - * at most 32 to avoid lockups. - */ - DBG("PCI: Setting max latency to 32\n"); - pcibios_max_latency = 32; -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5513, pci_fixup_ide_trash); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency); -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); - -/* - * Called after each bus is probed, but before its children - * are examined. - */ - -void pcibios_fixup_bus(struct pci_bus *bus) -{ -#if 0 - printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number); -#endif - - pci_read_bridge_bases(bus); - - if (bus->number == 0) { - struct pci_dev *dev; - list_for_each_entry(dev, &bus->devices, bus_list) { - if (dev->devfn == 0) { - dev->resource[0].start = 0; - dev->resource[0].end = 0; - } - } - } -} - -/* - * Initialization. Try all known PCI access methods. Note that we support - * using both PCI BIOS and direct access: in such cases, we use I/O ports - * to access config space, but we still keep BIOS order of cards to be - * compatible with 2.0.X. This should go away some day. - */ - -int __init pcibios_init(void) -{ - struct pci_bus *bus; - struct pci_ops *dir = NULL; - LIST_HEAD(resources); - - if (!mb93090_mb00_detected) - return -ENXIO; - - __reg_MB86943_sl_ctl |= MB86943_SL_CTL_DRCT_MASTER_SWAP | MB86943_SL_CTL_DRCT_SLAVE_SWAP; - - __reg_MB86943_ecs_base(1) = ((__region_CS2 + 0x01000000) >> 9) | 0x08000000; - __reg_MB86943_ecs_base(2) = ((__region_CS2 + 0x00000000) >> 9) | 0x08000000; - - *(volatile uint32_t *) (__region_CS1 + 0x848) = 0xe0000000; - *(volatile uint32_t *) (__region_CS1 + 0x8b8) = 0x00000000; - - __reg_MB86943_sl_pci_io_base = (__region_CS2 + 0x04000000) >> 9; - __reg_MB86943_sl_pci_mem_base = (__region_CS2 + 0x08000000) >> 9; - __reg_MB86943_pci_sl_io_base = __region_CS2 + 0x04000000; - __reg_MB86943_pci_sl_mem_base = __region_CS2 + 0x08000000; - mb(); - - /* enable PCI arbitration */ - __reg_MB86943_pci_arbiter = MB86943_PCIARB_EN; - - pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00; - pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff; - pci_ioport_resource.end += pci_ioport_resource.start; - - printk("PCI IO window: %08llx-%08llx\n", - (unsigned long long) pci_ioport_resource.start, - (unsigned long long) pci_ioport_resource.end); - - pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00; - pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff; - pci_iomem_resource.end += pci_iomem_resource.start; - - /* Reserve somewhere to write to flush posted writes. This is used by - * __flush_PCI_writes() from asm/io.h to force the write FIFO in the - * CPU-PCI bridge to flush as this doesn't happen automatically when a - * read is performed on the MB93090 development kit motherboard. - */ - pci_iomem_resource.start += 0x400; - - printk("PCI MEM window: %08llx-%08llx\n", - (unsigned long long) pci_iomem_resource.start, - (unsigned long long) pci_iomem_resource.end); - printk("PCI DMA memory: %08lx-%08lx\n", - dma_coherent_mem_start, dma_coherent_mem_end); - - if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0) - panic("Unable to insert PCI IOMEM resource\n"); - if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0) - panic("Unable to insert PCI IOPORT resource\n"); - - if (!pci_probe) - return -ENXIO; - - dir = pci_check_direct(); - if (dir) - pci_root_ops = dir; - else { - printk("PCI: No PCI bus detected\n"); - return -ENXIO; - } - - printk("PCI: Probing PCI hardware\n"); - pci_add_resource(&resources, &pci_ioport_resource); - pci_add_resource(&resources, &pci_iomem_resource); - bus = pci_scan_root_bus(NULL, 0, pci_root_ops, NULL, &resources); - - pcibios_irq_init(); - pcibios_fixup_irqs(); - pcibios_resource_survey(); - if (!bus) - return 0; - - pci_bus_add_devices(bus); - return 0; -} - -arch_initcall(pcibios_init); - -char * __init pcibios_setup(char *str) -{ - if (!strcmp(str, "off")) { - pci_probe = 0; - return NULL; - } - return str; -} - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - int err; - - if ((err = pci_enable_resources(dev, mask)) < 0) - return err; - if (!dev->msi_enabled) - pcibios_enable_irq(dev); - return 0; -} diff --git a/arch/frv/mm/Makefile b/arch/frv/mm/Makefile deleted file mode 100644 index 1bca5ab8a6ab..000000000000 --- a/arch/frv/mm/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for the arch-specific parts of the memory manager. -# - -obj-y := init.o kmap.o - -obj-$(CONFIG_MMU) += \ - pgalloc.o highmem.o fault.o extable.o cache-page.o tlb-flush.o tlb-miss.o \ - mmu-context.o dma-alloc.o elf-fdpic.o diff --git a/arch/frv/mm/cache-page.c b/arch/frv/mm/cache-page.c deleted file mode 100644 index 8e09dae0ec3f..000000000000 --- a/arch/frv/mm/cache-page.c +++ /dev/null @@ -1,71 +0,0 @@ -/* cache-page.c: whole-page cache wrangling functions for MMU linux - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/highmem.h> -#include <linux/module.h> -#include <asm/pgalloc.h> - -/*****************************************************************************/ -/* - * DCF takes a virtual address and the page may not currently have one - * - temporarily hijack a kmap_atomic() slot and attach the page to it - */ -void flush_dcache_page(struct page *page) -{ - unsigned long dampr2; - void *vaddr; - - dampr2 = __get_DAMPR(2); - - vaddr = kmap_atomic_primary(page); - - frv_dcache_writeback((unsigned long) vaddr, (unsigned long) vaddr + PAGE_SIZE); - - kunmap_atomic_primary(vaddr); - - if (dampr2) { - __set_DAMPR(2, dampr2); - __set_IAMPR(2, dampr2); - } - -} /* end flush_dcache_page() */ - -EXPORT_SYMBOL(flush_dcache_page); - -/*****************************************************************************/ -/* - * ICI takes a virtual address and the page may not currently have one - * - so we temporarily attach the page to a bit of virtual space so that is can be flushed - */ -void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, - unsigned long start, unsigned long len) -{ - unsigned long dampr2; - void *vaddr; - - dampr2 = __get_DAMPR(2); - - vaddr = kmap_atomic_primary(page); - - start = (start & ~PAGE_MASK) | (unsigned long) vaddr; - frv_cache_wback_inv(start, start + len); - - kunmap_atomic_primary(vaddr); - - if (dampr2) { - __set_DAMPR(2, dampr2); - __set_IAMPR(2, dampr2); - } - -} /* end flush_icache_user_range() */ - -EXPORT_SYMBOL(flush_icache_user_range); diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c deleted file mode 100644 index e701aa9e6a14..000000000000 --- a/arch/frv/mm/dma-alloc.c +++ /dev/null @@ -1,183 +0,0 @@ -/* dma-alloc.c: consistent DMA memory allocation - * - * Derived from arch/ppc/mm/cachemap.c - * - * PowerPC version derived from arch/arm/mm/consistent.c - * Copyright (C) 2001 Dan Malek (dmalek@jlc.net) - * - * linux/arch/arm/mm/consistent.c - * - * Copyright (C) 2000 Russell King - * - * Consistent memory allocators. Used for DMA devices that want to - * share uncached memory with the processor core. The function return - * is the virtual address and 'dma_handle' is the physical address. - * Mostly stolen from the ARM port, with some changes for PowerPC. - * -- Dan - * Modified for 36-bit support. -Matt - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/stddef.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/hardirq.h> -#include <linux/gfp.h> - -#include <asm/pgalloc.h> -#include <asm/io.h> -#include <asm/mmu_context.h> -#include <asm/pgtable.h> -#include <asm/mmu.h> -#include <linux/uaccess.h> -#include <asm/smp.h> - -static int map_page(unsigned long va, unsigned long pa, pgprot_t prot) -{ - pgd_t *pge; - pud_t *pue; - pmd_t *pme; - pte_t *pte; - int err = -ENOMEM; - - /* Use upper 10 bits of VA to index the first level map */ - pge = pgd_offset_k(va); - pue = pud_offset(pge, va); - pme = pmd_offset(pue, va); - - /* Use middle 10 bits of VA to index the second-level map */ - pte = pte_alloc_kernel(pme, va); - if (pte != 0) { - err = 0; - set_pte(pte, mk_pte_phys(pa & PAGE_MASK, prot)); - } - - return err; -} - -/* - * This function will allocate the requested contiguous pages and - * map them into the kernel's vmalloc() space. This is done so we - * get unique mapping for these pages, outside of the kernel's 1:1 - * virtual:physical mapping. This is necessary so we can cover large - * portions of the kernel with single large page TLB entries, and - * still get unique uncached pages for consistent DMA. - */ -void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle) -{ - struct vm_struct *area; - unsigned long page, va, pa; - void *ret; - int order, err, i; - - if (in_interrupt()) - BUG(); - - /* only allocate page size areas */ - size = PAGE_ALIGN(size); - order = get_order(size); - - page = __get_free_pages(gfp, order); - if (!page) { - BUG(); - return NULL; - } - - /* allocate some common virtual space to map the new pages */ - area = get_vm_area(size, VM_ALLOC); - if (area == 0) { - free_pages(page, order); - return NULL; - } - va = VMALLOC_VMADDR(area->addr); - ret = (void *) va; - - /* this gives us the real physical address of the first page */ - *dma_handle = pa = virt_to_bus((void *) page); - - /* set refcount=1 on all pages in an order>0 allocation so that vfree() will actually free - * all pages that were allocated. - */ - if (order > 0) { - struct page *rpage = virt_to_page(page); - split_page(rpage, order); - } - - err = 0; - for (i = 0; i < size && err == 0; i += PAGE_SIZE) - err = map_page(va + i, pa + i, PAGE_KERNEL_NOCACHE); - - if (err) { - vfree((void *) va); - return NULL; - } - - /* we need to ensure that there are no cachelines in use, or worse dirty in this area - * - can't do until after virtual address mappings are created - */ - frv_cache_invalidate(va, va + size); - - return ret; -} - -/* - * free page(s) as defined by the above mapping. - */ -void consistent_free(void *vaddr) -{ - if (in_interrupt()) - BUG(); - vfree(vaddr); -} - -/* - * make an area consistent. - */ -void consistent_sync(void *vaddr, size_t size, int direction) -{ - unsigned long start = (unsigned long) vaddr; - unsigned long end = start + size; - - switch (direction) { - case PCI_DMA_NONE: - BUG(); - case PCI_DMA_FROMDEVICE: /* invalidate only */ - frv_cache_invalidate(start, end); - break; - case PCI_DMA_TODEVICE: /* writeback only */ - frv_dcache_writeback(start, end); - break; - case PCI_DMA_BIDIRECTIONAL: /* writeback and invalidate */ - frv_dcache_writeback(start, end); - break; - } -} - -/* - * consistent_sync_page make a page are consistent. identical - * to consistent_sync, but takes a struct page instead of a virtual address - */ - -void consistent_sync_page(struct page *page, unsigned long offset, - size_t size, int direction) -{ - void *start; - - start = page_address(page) + offset; - consistent_sync(start, size, direction); -} diff --git a/arch/frv/mm/elf-fdpic.c b/arch/frv/mm/elf-fdpic.c deleted file mode 100644 index 46aa289c5102..000000000000 --- a/arch/frv/mm/elf-fdpic.c +++ /dev/null @@ -1,114 +0,0 @@ -/* elf-fdpic.c: ELF FDPIC memory layout management - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/sched.h> -#include <linux/sched/mm.h> -#include <linux/mm.h> -#include <linux/fs.h> -#include <linux/elf-fdpic.h> -#include <asm/mman.h> - -/*****************************************************************************/ -/* - * lay out the userspace VM according to our grand design - */ -#ifdef CONFIG_MMU -void elf_fdpic_arch_lay_out_mm(struct elf_fdpic_params *exec_params, - struct elf_fdpic_params *interp_params, - unsigned long *start_stack, - unsigned long *start_brk) -{ - *start_stack = 0x02200000UL; - - /* if the only executable is a shared object, assume that it is an interpreter rather than - * a true executable, and map it such that "ld.so --list" comes out right - */ - if (!(interp_params->flags & ELF_FDPIC_FLAG_PRESENT) && - exec_params->hdr.e_type != ET_EXEC - ) { - exec_params->load_addr = PAGE_SIZE; - - *start_brk = 0x80000000UL; - } - else { - exec_params->load_addr = 0x02200000UL; - - if ((exec_params->flags & ELF_FDPIC_FLAG_ARRANGEMENT) == - ELF_FDPIC_FLAG_INDEPENDENT - ) { - exec_params->flags &= ~ELF_FDPIC_FLAG_ARRANGEMENT; - exec_params->flags |= ELF_FDPIC_FLAG_CONSTDISP; - } - } - -} /* end elf_fdpic_arch_lay_out_mm() */ -#endif - -/*****************************************************************************/ -/* - * place non-fixed mmaps firstly in the bottom part of memory, working up, and then in the top part - * of memory, working down - */ -unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsigned long len, - unsigned long pgoff, unsigned long flags) -{ - struct vm_area_struct *vma; - struct vm_unmapped_area_info info; - - if (len > TASK_SIZE) - return -ENOMEM; - - /* handle MAP_FIXED */ - if (flags & MAP_FIXED) - return addr; - - /* only honour a hint if we're not going to clobber something doing so */ - if (addr) { - addr = PAGE_ALIGN(addr); - vma = find_vma(current->mm, addr); - if (TASK_SIZE - len >= addr && - (!vma || addr + len <= vm_start_gap(vma))) - goto success; - } - - /* search between the bottom of user VM and the stack grow area */ - info.flags = 0; - info.length = len; - info.low_limit = PAGE_SIZE; - info.high_limit = (current->mm->start_stack - 0x00200000); - info.align_mask = 0; - info.align_offset = 0; - addr = vm_unmapped_area(&info); - if (!(addr & ~PAGE_MASK)) - goto success; - VM_BUG_ON(addr != -ENOMEM); - - /* search from just above the WorkRAM area to the top of memory */ - info.low_limit = PAGE_ALIGN(0x80000000); - info.high_limit = TASK_SIZE; - addr = vm_unmapped_area(&info); - if (!(addr & ~PAGE_MASK)) - goto success; - VM_BUG_ON(addr != -ENOMEM); - -#if 0 - printk("[area] l=%lx (ENOMEM) f='%s'\n", - len, filp ? filp->f_path.dentry->d_name.name : ""); -#endif - return -ENOMEM; - - success: -#if 0 - printk("[area] l=%lx ad=%lx f='%s'\n", - len, addr, filp ? filp->f_path.dentry->d_name.name : ""); -#endif - return addr; -} /* end arch_get_unmapped_area() */ diff --git a/arch/frv/mm/extable.c b/arch/frv/mm/extable.c deleted file mode 100644 index 77c0c5ba88bc..000000000000 --- a/arch/frv/mm/extable.c +++ /dev/null @@ -1,49 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/frv/mm/extable.c - */ - -#include <linux/extable.h> -#include <linux/spinlock.h> -#include <linux/uaccess.h> - -extern const void __memset_end, __memset_user_error_lr, __memset_user_error_handler; -extern const void __memcpy_end, __memcpy_user_error_lr, __memcpy_user_error_handler; -extern spinlock_t modlist_lock; - -int fixup_exception(struct pt_regs *regs) -{ - const struct exception_table_entry *extab; - unsigned long pc = regs->pc; - - /* determine if the fault lay during a memcpy_user or a memset_user */ - if (regs->lr == (unsigned long) &__memset_user_error_lr && - (unsigned long) &memset <= pc && pc < (unsigned long) &__memset_end - ) { - /* the fault occurred in a protected memset - * - we search for the return address (in LR) instead of the program counter - * - it was probably during a clear_user() - */ - regs->pc = (unsigned long) &__memset_user_error_handler; - return 1; - } - - if (regs->lr == (unsigned long) &__memcpy_user_error_lr && - (unsigned long) &memcpy <= pc && pc < (unsigned long) &__memcpy_end - ) { - /* the fault occurred in a protected memset - * - we search for the return address (in LR) instead of the program counter - * - it was probably during a copy_to/from_user() - */ - regs->pc = (unsigned long) &__memcpy_user_error_handler; - return 1; - } - - extab = search_exception_tables(pc); - if (extab) { - regs->pc = extab->fixup; - return 1; - } - - return 0; -} diff --git a/arch/frv/mm/fault.c b/arch/frv/mm/fault.c deleted file mode 100644 index cbe7aec863e3..000000000000 --- a/arch/frv/mm/fault.c +++ /dev/null @@ -1,328 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/frv/mm/fault.c - * - * Copyright (C) 2003 Red Hat, Inc. All Rights Reserved. - * - Written by David Howells (dhowells@redhat.com) - * - Derived from arch/m68knommu/mm/fault.c - * - Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, - * - Copyright (C) 2000 Lineo, Inc. (www.lineo.com) - * - * Based on: - * - * linux/arch/m68k/mm/fault.c - * - * Copyright (C) 1995 Hamish Macdonald - */ - -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/ptrace.h> -#include <linux/hardirq.h> -#include <linux/uaccess.h> - -#include <asm/pgtable.h> -#include <asm/gdb-stub.h> - -/*****************************************************************************/ -/* - * This routine handles page faults. It determines the problem, and - * then passes it off to one of the appropriate routines. - */ -asmlinkage void do_page_fault(int datammu, unsigned long esr0, unsigned long ear0) -{ - struct vm_area_struct *vma; - struct mm_struct *mm; - unsigned long _pme, lrai, lrad; - unsigned long flags = 0; - siginfo_t info; - pgd_t *pge; - pud_t *pue; - pte_t *pte; - int fault; - -#if 0 - const char *atxc[16] = { - [0x0] = "mmu-miss", [0x8] = "multi-dat", [0x9] = "multi-sat", - [0xa] = "tlb-miss", [0xc] = "privilege", [0xd] = "write-prot", - }; - - printk("do_page_fault(%d,%lx [%s],%lx)\n", - datammu, esr0, atxc[esr0 >> 20 & 0xf], ear0); -#endif - - mm = current->mm; - - /* - * We fault-in kernel-space virtual memory on-demand. The - * 'reference' page table is init_mm.pgd. - * - * NOTE! We MUST NOT take any locks for this case. We may - * be in an interrupt or a critical region, and should - * only copy the information from the master page table, - * nothing more. - * - * This verifies that the fault happens in kernel space - * and that the fault was a page not present (invalid) error - */ - if (!user_mode(__frame) && (esr0 & ESR0_ATXC) == ESR0_ATXC_AMRTLB_MISS) { - if (ear0 >= VMALLOC_START && ear0 < VMALLOC_END) - goto kernel_pte_fault; - if (ear0 >= PKMAP_BASE && ear0 < PKMAP_END) - goto kernel_pte_fault; - } - - info.si_code = SEGV_MAPERR; - - /* - * If we're in an interrupt or have no user - * context, we must not take the fault.. - */ - if (faulthandler_disabled() || !mm) - goto no_context; - - if (user_mode(__frame)) - flags |= FAULT_FLAG_USER; - - down_read(&mm->mmap_sem); - - vma = find_vma(mm, ear0); - if (!vma) - goto bad_area; - if (vma->vm_start <= ear0) - goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) - goto bad_area; - - if (user_mode(__frame)) { - /* - * accessing the stack below %esp is always a bug. - * The "+ 32" is there due to some instructions (like - * pusha) doing post-decrement on the stack and that - * doesn't show up until later.. - */ - if ((ear0 & PAGE_MASK) + 2 * PAGE_SIZE < __frame->sp) { -#if 0 - printk("[%d] ### Access below stack @%lx (sp=%lx)\n", - current->pid, ear0, __frame->sp); - show_registers(__frame); - printk("[%d] ### Code: [%08lx] %02x %02x %02x %02x %02x %02x %02x %02x\n", - current->pid, - __frame->pc, - ((u8*)__frame->pc)[0], - ((u8*)__frame->pc)[1], - ((u8*)__frame->pc)[2], - ((u8*)__frame->pc)[3], - ((u8*)__frame->pc)[4], - ((u8*)__frame->pc)[5], - ((u8*)__frame->pc)[6], - ((u8*)__frame->pc)[7] - ); -#endif - goto bad_area; - } - } - - if (expand_stack(vma, ear0)) - goto bad_area; - -/* - * Ok, we have a good vm_area for this memory access, so - * we can handle it.. - */ - good_area: - info.si_code = SEGV_ACCERR; - switch (esr0 & ESR0_ATXC) { - default: - /* handle write to write protected page */ - case ESR0_ATXC_WP_EXCEP: -#ifdef TEST_VERIFY_AREA - if (!(user_mode(__frame))) - printk("WP fault at %08lx\n", __frame->pc); -#endif - if (!(vma->vm_flags & VM_WRITE)) - goto bad_area; - flags |= FAULT_FLAG_WRITE; - break; - - /* handle read from protected page */ - case ESR0_ATXC_PRIV_EXCEP: - goto bad_area; - - /* handle read, write or exec on absent page - * - can't support write without permitting read - * - don't support execute without permitting read and vice-versa - */ - case ESR0_ATXC_AMRTLB_MISS: - if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))) - goto bad_area; - break; - } - - /* - * If for any reason at all we couldn't handle the fault, - * make sure we exit gracefully rather than endlessly redo - * the fault. - */ - fault = handle_mm_fault(vma, ear0, flags); - if (unlikely(fault & VM_FAULT_ERROR)) { - if (fault & VM_FAULT_OOM) - goto out_of_memory; - else if (fault & VM_FAULT_SIGSEGV) - goto bad_area; - else if (fault & VM_FAULT_SIGBUS) - goto do_sigbus; - BUG(); - } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; - - up_read(&mm->mmap_sem); - return; - -/* - * Something tried to access memory that isn't in our memory map.. - * Fix it, but check if it's kernel or user first.. - */ - bad_area: - up_read(&mm->mmap_sem); - - /* User mode accesses just cause a SIGSEGV */ - if (user_mode(__frame)) { - info.si_signo = SIGSEGV; - info.si_errno = 0; - /* info.si_code has been set above */ - info.si_addr = (void *) ear0; - force_sig_info(SIGSEGV, &info, current); - return; - } - - no_context: - /* are we prepared to handle this kernel fault? */ - if (fixup_exception(__frame)) - return; - -/* - * Oops. The kernel tried to access some bad page. We'll have to - * terminate things with extreme prejudice. - */ - - bust_spinlocks(1); - - if (ear0 < PAGE_SIZE) - printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); - else - printk(KERN_ALERT "Unable to handle kernel paging request"); - printk(" at virtual addr %08lx\n", ear0); - printk(" PC : %08lx\n", __frame->pc); - printk(" EXC : esr0=%08lx ear0=%08lx\n", esr0, ear0); - - asm("lrai %1,%0,#1,#0,#0" : "=&r"(lrai) : "r"(ear0)); - asm("lrad %1,%0,#1,#0,#0" : "=&r"(lrad) : "r"(ear0)); - - printk(KERN_ALERT " LRAI: %08lx\n", lrai); - printk(KERN_ALERT " LRAD: %08lx\n", lrad); - - __break_hijack_kernel_event(); - - pge = pgd_offset(current->mm, ear0); - pue = pud_offset(pge, ear0); - _pme = pue->pue[0].ste[0]; - - printk(KERN_ALERT " PGE : %8p { PME %08lx }\n", pge, _pme); - - if (_pme & xAMPRx_V) { - unsigned long dampr, damlr, val; - - asm volatile("movsg dampr2,%0 ! movgs %2,dampr2 ! movsg damlr2,%1" - : "=&r"(dampr), "=r"(damlr) - : "r" (_pme | xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V) - ); - - pte = (pte_t *) damlr + __pte_index(ear0); - val = pte_val(*pte); - - asm volatile("movgs %0,dampr2" :: "r" (dampr)); - - printk(KERN_ALERT " PTE : %8p { %08lx }\n", pte, val); - } - - die_if_kernel("Oops\n"); - do_exit(SIGKILL); - -/* - * We ran out of memory, or some other thing happened to us that made - * us unable to handle the page fault gracefully. - */ - out_of_memory: - up_read(&mm->mmap_sem); - if (!user_mode(__frame)) - goto no_context; - pagefault_out_of_memory(); - return; - - do_sigbus: - up_read(&mm->mmap_sem); - - /* - * Send a sigbus, regardless of whether we were in kernel - * or user mode. - */ - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_ADRERR; - info.si_addr = (void *) ear0; - force_sig_info(SIGBUS, &info, current); - - /* Kernel mode? Handle exceptions or die */ - if (!user_mode(__frame)) - goto no_context; - return; - -/* - * The fault was caused by a kernel PTE (such as installed by vmalloc or kmap) - */ - kernel_pte_fault: - { - /* - * Synchronize this task's top level page-table - * with the 'reference' page table. - * - * Do _not_ use "tsk" here. We might be inside - * an interrupt in the middle of a task switch.. - */ - int index = pgd_index(ear0); - pgd_t *pgd, *pgd_k; - pud_t *pud, *pud_k; - pmd_t *pmd, *pmd_k; - pte_t *pte_k; - - pgd = (pgd_t *) __get_TTBR(); - pgd = (pgd_t *)__va(pgd) + index; - pgd_k = ((pgd_t *)(init_mm.pgd)) + index; - - if (!pgd_present(*pgd_k)) - goto no_context; - //set_pgd(pgd, *pgd_k); /////// gcc ICE's on this line - - pud_k = pud_offset(pgd_k, ear0); - if (!pud_present(*pud_k)) - goto no_context; - - pmd_k = pmd_offset(pud_k, ear0); - if (!pmd_present(*pmd_k)) - goto no_context; - - pud = pud_offset(pgd, ear0); - pmd = pmd_offset(pud, ear0); - set_pmd(pmd, *pmd_k); - - pte_k = pte_offset_kernel(pmd_k, ear0); - if (!pte_present(*pte_k)) - goto no_context; - return; - } -} /* end do_page_fault() */ diff --git a/arch/frv/mm/highmem.c b/arch/frv/mm/highmem.c deleted file mode 100644 index 45750fb65c49..000000000000 --- a/arch/frv/mm/highmem.c +++ /dev/null @@ -1,86 +0,0 @@ -/* highmem.c: arch-specific highmem stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/highmem.h> -#include <linux/module.h> - -void *kmap(struct page *page) -{ - might_sleep(); - if (!PageHighMem(page)) - return page_address(page); - return kmap_high(page); -} - -EXPORT_SYMBOL(kmap); - -void kunmap(struct page *page) -{ - if (in_interrupt()) - BUG(); - if (!PageHighMem(page)) - return; - kunmap_high(page); -} - -EXPORT_SYMBOL(kunmap); - -void *kmap_atomic(struct page *page) -{ - unsigned long paddr; - int type; - - preempt_disable(); - pagefault_disable(); - type = kmap_atomic_idx_push(); - paddr = page_to_phys(page); - - switch (type) { - /* - * The first 4 primary maps are reserved for architecture code - */ - case 0: return __kmap_atomic_primary(0, paddr, 6); - case 1: return __kmap_atomic_primary(0, paddr, 7); - case 2: return __kmap_atomic_primary(0, paddr, 8); - case 3: return __kmap_atomic_primary(0, paddr, 9); - case 4: return __kmap_atomic_primary(0, paddr, 10); - - case 5 ... 5 + NR_TLB_LINES - 1: - return __kmap_atomic_secondary(type - 5, paddr); - - default: - BUG(); - return NULL; - } -} -EXPORT_SYMBOL(kmap_atomic); - -void __kunmap_atomic(void *kvaddr) -{ - int type = kmap_atomic_idx(); - switch (type) { - case 0: __kunmap_atomic_primary(0, 6); break; - case 1: __kunmap_atomic_primary(0, 7); break; - case 2: __kunmap_atomic_primary(0, 8); break; - case 3: __kunmap_atomic_primary(0, 9); break; - case 4: __kunmap_atomic_primary(0, 10); break; - - case 5 ... 5 + NR_TLB_LINES - 1: - __kunmap_atomic_secondary(type - 5, kvaddr); - break; - - default: - BUG(); - } - kmap_atomic_idx_pop(); - pagefault_enable(); - preempt_enable(); -} -EXPORT_SYMBOL(__kunmap_atomic); diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c deleted file mode 100644 index cf464100e838..000000000000 --- a/arch/frv/mm/init.c +++ /dev/null @@ -1,144 +0,0 @@ -/* init.c: memory initialisation for FRV - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Derived from: - * - linux/arch/m68knommu/mm/init.c - * - Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, Kenneth Albanowski <kjahds@kjahds.com>, - * - Copyright (C) 2000 Lineo, Inc. (www.lineo.com) - * - linux/arch/m68k/mm/init.c - * - Copyright (C) 1995 Hamish Macdonald - */ - -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/sched/task.h> -#include <linux/pagemap.h> -#include <linux/gfp.h> -#include <linux/swap.h> -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/bootmem.h> -#include <linux/highmem.h> -#include <linux/module.h> - -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/mmu_context.h> -#include <asm/virtconvert.h> -#include <asm/sections.h> -#include <asm/tlb.h> - -#undef DEBUG - -/* - * ZERO_PAGE is a special page that is used for zero-initialized - * data and COW. - */ -unsigned long empty_zero_page; -EXPORT_SYMBOL(empty_zero_page); - -/*****************************************************************************/ -/* - * paging_init() continues the virtual memory environment setup which - * was begun by the code in arch/head.S. - * The parameters are pointers to where to stick the starting and ending - * addresses of available kernel virtual memory. - */ -void __init paging_init(void) -{ - unsigned long zones_size[MAX_NR_ZONES] = {0, }; - - /* allocate some pages for kernel housekeeping tasks */ - empty_zero_page = (unsigned long) alloc_bootmem_pages(PAGE_SIZE); - - memset((void *) empty_zero_page, 0, PAGE_SIZE); - -#ifdef CONFIG_HIGHMEM - if (get_num_physpages() - num_mappedpages) { - pgd_t *pge; - pud_t *pue; - pmd_t *pme; - - pkmap_page_table = alloc_bootmem_pages(PAGE_SIZE); - - pge = swapper_pg_dir + pgd_index_k(PKMAP_BASE); - pue = pud_offset(pge, PKMAP_BASE); - pme = pmd_offset(pue, PKMAP_BASE); - __set_pmd(pme, virt_to_phys(pkmap_page_table) | _PAGE_TABLE); - } -#endif - - /* distribute the allocatable pages across the various zones and pass them to the allocator - */ - zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; -#ifdef CONFIG_HIGHMEM - zones_size[ZONE_HIGHMEM] = get_num_physpages() - num_mappedpages; -#endif - - free_area_init(zones_size); - -#ifdef CONFIG_MMU - /* initialise init's MMU context */ - init_new_context(&init_task, &init_mm); -#endif - -} /* end paging_init() */ - -/*****************************************************************************/ -/* - * - */ -void __init mem_init(void) -{ - unsigned long code_size = _etext - _stext; - - /* this will put all low memory onto the freelists */ - free_all_bootmem(); -#if defined(CONFIG_MMU) && defined(CONFIG_HIGHMEM) - { - unsigned long pfn; - - for (pfn = get_num_physpages() - 1; - pfn >= num_mappedpages; pfn--) - free_highmem_page(&mem_map[pfn]); - } -#endif - - mem_init_print_info(NULL); - if (rom_length > 0 && rom_length >= code_size) - printk("Memory available: %luKiB/%luKiB ROM\n", - (rom_length - code_size) >> 10, rom_length >> 10); -} /* end mem_init() */ - -/*****************************************************************************/ -/* - * free the memory that was only required for initialisation - */ -void free_initmem(void) -{ -#if defined(CONFIG_RAMKERNEL) && !defined(CONFIG_PROTECT_KERNEL) - free_initmem_default(-1); -#endif -} /* end free_initmem() */ - -/*****************************************************************************/ -/* - * free the initial ramdisk memory - */ -#ifdef CONFIG_BLK_DEV_INITRD -void __init free_initrd_mem(unsigned long start, unsigned long end) -{ - free_reserved_area((void *)start, (void *)end, -1, "initrd"); -} /* end free_initrd_mem() */ -#endif diff --git a/arch/frv/mm/kmap.c b/arch/frv/mm/kmap.c deleted file mode 100644 index e9217e605aa8..000000000000 --- a/arch/frv/mm/kmap.c +++ /dev/null @@ -1,51 +0,0 @@ -/* kmap.c: ioremapping handlers - * - * Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - Derived from arch/m68k/mm/kmap.c - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/mm.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/vmalloc.h> - -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/page.h> -#include <asm/pgalloc.h> -#include <asm/io.h> - -#undef DEBUG - -/*****************************************************************************/ -/* - * Map some physical address range into the kernel address space. - */ - -void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag) -{ - return (void __iomem *)physaddr; -} - -/* - * Unmap a ioremap()ed region again - */ -void iounmap(void volatile __iomem *addr) -{ -} - -/* - * Set new cache mode for some kernel address space. - * The caller must push data for that range itself, if such data may already - * be in the cache. - */ -void kernel_set_cachemode(void *addr, unsigned long size, int cmode) -{ -} diff --git a/arch/frv/mm/mmu-context.c b/arch/frv/mm/mmu-context.c deleted file mode 100644 index 16946a58f64d..000000000000 --- a/arch/frv/mm/mmu-context.c +++ /dev/null @@ -1,210 +0,0 @@ -/* mmu-context.c: MMU context allocation and management - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/sched.h> -#include <linux/sched/mm.h> -#include <linux/sched/task.h> -#include <linux/mm.h> -#include <asm/tlbflush.h> - -#define NR_CXN 4096 - -static unsigned long cxn_bitmap[NR_CXN / (sizeof(unsigned long) * 8)]; -static LIST_HEAD(cxn_owners_lru); -static DEFINE_SPINLOCK(cxn_owners_lock); - -int __nongpreldata cxn_pinned = -1; - - -/*****************************************************************************/ -/* - * initialise a new context - */ -int init_new_context(struct task_struct *tsk, struct mm_struct *mm) -{ - memset(&mm->context, 0, sizeof(mm->context)); - INIT_LIST_HEAD(&mm->context.id_link); - mm->context.itlb_cached_pge = 0xffffffffUL; - mm->context.dtlb_cached_pge = 0xffffffffUL; - - return 0; -} /* end init_new_context() */ - -/*****************************************************************************/ -/* - * make sure a kernel MMU context has a CPU context number - * - call with cxn_owners_lock held - */ -static unsigned get_cxn(mm_context_t *ctx) -{ - struct list_head *_p; - mm_context_t *p; - unsigned cxn; - - if (!list_empty(&ctx->id_link)) { - list_move_tail(&ctx->id_link, &cxn_owners_lru); - } - else { - /* find the first unallocated context number - * - 0 is reserved for the kernel - */ - cxn = find_next_zero_bit(cxn_bitmap, NR_CXN, 1); - if (cxn < NR_CXN) { - set_bit(cxn, cxn_bitmap); - } - else { - /* none remaining - need to steal someone else's cxn */ - p = NULL; - list_for_each(_p, &cxn_owners_lru) { - p = list_entry(_p, mm_context_t, id_link); - if (!p->id_busy && p->id != cxn_pinned) - break; - } - - BUG_ON(_p == &cxn_owners_lru); - - cxn = p->id; - p->id = 0; - list_del_init(&p->id_link); - __flush_tlb_mm(cxn); - } - - ctx->id = cxn; - list_add_tail(&ctx->id_link, &cxn_owners_lru); - } - - return ctx->id; -} /* end get_cxn() */ - -/*****************************************************************************/ -/* - * restore the current TLB miss handler mapped page tables into the MMU context and set up a - * mapping for the page directory - */ -void change_mm_context(mm_context_t *old, mm_context_t *ctx, pgd_t *pgd) -{ - unsigned long _pgd; - - _pgd = virt_to_phys(pgd); - - /* save the state of the outgoing MMU context */ - old->id_busy = 0; - - asm volatile("movsg scr0,%0" : "=r"(old->itlb_cached_pge)); - asm volatile("movsg dampr4,%0" : "=r"(old->itlb_ptd_mapping)); - asm volatile("movsg scr1,%0" : "=r"(old->dtlb_cached_pge)); - asm volatile("movsg dampr5,%0" : "=r"(old->dtlb_ptd_mapping)); - - /* select an MMU context number */ - spin_lock(&cxn_owners_lock); - get_cxn(ctx); - ctx->id_busy = 1; - spin_unlock(&cxn_owners_lock); - - asm volatile("movgs %0,cxnr" : : "r"(ctx->id)); - - /* restore the state of the incoming MMU context */ - asm volatile("movgs %0,scr0" : : "r"(ctx->itlb_cached_pge)); - asm volatile("movgs %0,dampr4" : : "r"(ctx->itlb_ptd_mapping)); - asm volatile("movgs %0,scr1" : : "r"(ctx->dtlb_cached_pge)); - asm volatile("movgs %0,dampr5" : : "r"(ctx->dtlb_ptd_mapping)); - - /* map the PGD into uncached virtual memory */ - asm volatile("movgs %0,ttbr" : : "r"(_pgd)); - asm volatile("movgs %0,dampr3" - :: "r"(_pgd | xAMPRx_L | xAMPRx_M | xAMPRx_SS_16Kb | - xAMPRx_S | xAMPRx_C | xAMPRx_V)); - -} /* end change_mm_context() */ - -/*****************************************************************************/ -/* - * finished with an MMU context number - */ -void destroy_context(struct mm_struct *mm) -{ - mm_context_t *ctx = &mm->context; - - spin_lock(&cxn_owners_lock); - - if (!list_empty(&ctx->id_link)) { - if (ctx->id == cxn_pinned) - cxn_pinned = -1; - - list_del_init(&ctx->id_link); - clear_bit(ctx->id, cxn_bitmap); - __flush_tlb_mm(ctx->id); - ctx->id = 0; - } - - spin_unlock(&cxn_owners_lock); -} /* end destroy_context() */ - -/*****************************************************************************/ -/* - * display the MMU context currently a process is currently using - */ -#ifdef CONFIG_PROC_FS -char *proc_pid_status_frv_cxnr(struct mm_struct *mm, char *buffer) -{ - spin_lock(&cxn_owners_lock); - buffer += sprintf(buffer, "CXNR: %u\n", mm->context.id); - spin_unlock(&cxn_owners_lock); - - return buffer; -} /* end proc_pid_status_frv_cxnr() */ -#endif - -/*****************************************************************************/ -/* - * (un)pin a process's mm_struct's MMU context ID - */ -int cxn_pin_by_pid(pid_t pid) -{ - struct task_struct *tsk; - struct mm_struct *mm = NULL; - int ret; - - /* unpin if pid is zero */ - if (pid == 0) { - cxn_pinned = -1; - return 0; - } - - ret = -ESRCH; - - /* get a handle on the mm_struct */ - read_lock(&tasklist_lock); - tsk = find_task_by_vpid(pid); - if (tsk) { - ret = -EINVAL; - - task_lock(tsk); - if (tsk->mm) { - mm = tsk->mm; - mmget(mm); - ret = 0; - } - task_unlock(tsk); - } - read_unlock(&tasklist_lock); - - if (ret < 0) - return ret; - - /* make sure it has a CXN and pin it */ - spin_lock(&cxn_owners_lock); - cxn_pinned = get_cxn(&mm->context); - spin_unlock(&cxn_owners_lock); - - mmput(mm); - return 0; -} /* end cxn_pin_by_pid() */ diff --git a/arch/frv/mm/pgalloc.c b/arch/frv/mm/pgalloc.c deleted file mode 100644 index c9ed14f6c67d..000000000000 --- a/arch/frv/mm/pgalloc.c +++ /dev/null @@ -1,157 +0,0 @@ -/* pgalloc.c: page directory & page table allocation - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/sched.h> -#include <linux/gfp.h> -#include <linux/mm.h> -#include <linux/highmem.h> -#include <linux/quicklist.h> -#include <asm/pgalloc.h> -#include <asm/page.h> -#include <asm/cacheflush.h> - -pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((aligned(PAGE_SIZE))); - -pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address) -{ - pte_t *pte = (pte_t *)__get_free_page(GFP_KERNEL); - if (pte) - clear_page(pte); - return pte; -} - -pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address) -{ - struct page *page; - -#ifdef CONFIG_HIGHPTE - page = alloc_pages(GFP_KERNEL|__GFP_HIGHMEM, 0); -#else - page = alloc_pages(GFP_KERNEL, 0); -#endif - if (!page) - return NULL; - - clear_highpage(page); - if (!pgtable_page_ctor(page)) { - __free_page(page); - return NULL; - } - flush_dcache_page(page); - return page; -} - -void __set_pmd(pmd_t *pmdptr, unsigned long pmd) -{ - unsigned long *__ste_p = pmdptr->ste; - int loop; - - if (!pmd) { - memset(__ste_p, 0, PME_SIZE); - } - else { - BUG_ON(pmd & (0x3f00 | xAMPRx_SS | 0xe)); - - for (loop = PME_SIZE; loop > 0; loop -= 4) { - *__ste_p++ = pmd; - pmd += __frv_PT_SIZE; - } - } - - frv_dcache_writeback((unsigned long) pmdptr, (unsigned long) (pmdptr + 1)); -} - -/* - * List of all pgd's needed for non-PAE so it can invalidate entries - * in both cached and uncached pgd's; not needed for PAE since the - * kernel pmd is shared. If PAE were not to share the pmd a similar - * tactic would be needed. This is essentially codepath-based locking - * against pageattr.c; it is the unique case in which a valid change - * of kernel pagetables can't be lazily synchronized by vmalloc faults. - * vmalloc faults work because attached pagetables are never freed. - * If the locking proves to be non-performant, a ticketing scheme with - * checks at dup_mmap(), exec(), and other mmlist addition points - * could be used. The locking scheme was chosen on the basis of - * manfred's recommendations and having no core impact whatsoever. - * -- nyc - */ -DEFINE_SPINLOCK(pgd_lock); -struct page *pgd_list; - -static inline void pgd_list_add(pgd_t *pgd) -{ - struct page *page = virt_to_page(pgd); - page->index = (unsigned long) pgd_list; - if (pgd_list) - set_page_private(pgd_list, (unsigned long) &page->index); - pgd_list = page; - set_page_private(page, (unsigned long)&pgd_list); -} - -static inline void pgd_list_del(pgd_t *pgd) -{ - struct page *next, **pprev, *page = virt_to_page(pgd); - next = (struct page *) page->index; - pprev = (struct page **) page_private(page); - *pprev = next; - if (next) - set_page_private(next, (unsigned long) pprev); -} - -void pgd_ctor(void *pgd) -{ - unsigned long flags; - - if (PTRS_PER_PMD == 1) - spin_lock_irqsave(&pgd_lock, flags); - - memcpy((pgd_t *) pgd + USER_PGDS_IN_LAST_PML4, - swapper_pg_dir + USER_PGDS_IN_LAST_PML4, - (PTRS_PER_PGD - USER_PGDS_IN_LAST_PML4) * sizeof(pgd_t)); - - if (PTRS_PER_PMD > 1) - return; - - pgd_list_add(pgd); - spin_unlock_irqrestore(&pgd_lock, flags); - memset(pgd, 0, USER_PGDS_IN_LAST_PML4 * sizeof(pgd_t)); -} - -/* never called when PTRS_PER_PMD > 1 */ -void pgd_dtor(void *pgd) -{ - unsigned long flags; /* can be called from interrupt context */ - - spin_lock_irqsave(&pgd_lock, flags); - pgd_list_del(pgd); - spin_unlock_irqrestore(&pgd_lock, flags); -} - -pgd_t *pgd_alloc(struct mm_struct *mm) -{ - return quicklist_alloc(0, GFP_KERNEL, pgd_ctor); -} - -void pgd_free(struct mm_struct *mm, pgd_t *pgd) -{ - /* in the non-PAE case, clear_page_tables() clears user pgd entries */ - quicklist_free(0, pgd_dtor, pgd); -} - -void __init pgtable_cache_init(void) -{ -} - -void check_pgt_cache(void) -{ - quicklist_trim(0, pgd_dtor, 25, 16); -} - diff --git a/arch/frv/mm/tlb-flush.S b/arch/frv/mm/tlb-flush.S deleted file mode 100644 index 79b3c70910ac..000000000000 --- a/arch/frv/mm/tlb-flush.S +++ /dev/null @@ -1,184 +0,0 @@ -/* tlb-flush.S: TLB flushing routines - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/sys.h> -#include <linux/linkage.h> -#include <asm/page.h> -#include <asm/ptrace.h> -#include <asm/spr-regs.h> - -.macro DEBUG ch -# sethi.p %hi(0xfeff9c00),gr4 -# setlo %lo(0xfeff9c00),gr4 -# setlos #\ch,gr5 -# stbi gr5,@(gr4,#0) -# membar -.endm - - .section .rodata - - # sizes corresponding to TPXR.LMAX - .balign 1 -__tlb_lmax_sizes: - .byte 0, 64, 0, 0 - .byte 0, 0, 0, 0 - .byte 0, 0, 0, 0 - .byte 0, 0, 0, 0 - - .section .text - .balign 4 - -############################################################################### -# -# flush everything -# - void __flush_tlb_all(void) -# -############################################################################### - .globl __flush_tlb_all - .type __flush_tlb_all,@function -__flush_tlb_all: - DEBUG 'A' - - # kill cached PGE value - setlos #0xffffffff,gr4 - movgs gr4,scr0 - movgs gr4,scr1 - - # kill AMPR-cached TLB values - movgs gr0,iamlr1 - movgs gr0,iampr1 - movgs gr0,damlr1 - movgs gr0,dampr1 - - # find out how many lines there are - movsg tpxr,gr5 - sethi.p %hi(__tlb_lmax_sizes),gr4 - srli gr5,#TPXR_LMAX_SHIFT,gr5 - setlo.p %lo(__tlb_lmax_sizes),gr4 - andi gr5,#TPXR_LMAX_SMASK,gr5 - ldub @(gr4,gr5),gr4 - - # now, we assume that the TLB line step is page size in size - setlos.p #PAGE_SIZE,gr5 - setlos #0,gr6 -1: - tlbpr gr6,gr0,#6,#0 - subicc.p gr4,#1,gr4,icc0 - add gr6,gr5,gr6 - bne icc0,#2,1b - - DEBUG 'B' - bralr - - .size __flush_tlb_all, .-__flush_tlb_all - -############################################################################### -# -# flush everything to do with one context -# - void __flush_tlb_mm(unsigned long contextid [GR8]) -# -############################################################################### - .globl __flush_tlb_mm - .type __flush_tlb_mm,@function -__flush_tlb_mm: - DEBUG 'M' - - # kill cached PGE value - setlos #0xffffffff,gr4 - movgs gr4,scr0 - movgs gr4,scr1 - - # specify the context we want to flush - movgs gr8,tplr - - # find out how many lines there are - movsg tpxr,gr5 - sethi.p %hi(__tlb_lmax_sizes),gr4 - srli gr5,#TPXR_LMAX_SHIFT,gr5 - setlo.p %lo(__tlb_lmax_sizes),gr4 - andi gr5,#TPXR_LMAX_SMASK,gr5 - ldub @(gr4,gr5),gr4 - - # now, we assume that the TLB line step is page size in size - setlos.p #PAGE_SIZE,gr5 - setlos #0,gr6 -0: - tlbpr gr6,gr0,#5,#0 - subicc.p gr4,#1,gr4,icc0 - add gr6,gr5,gr6 - bne icc0,#2,0b - - DEBUG 'N' - bralr - - .size __flush_tlb_mm, .-__flush_tlb_mm - -############################################################################### -# -# flush a range of addresses from the TLB -# - void __flush_tlb_page(unsigned long contextid [GR8], -# unsigned long start [GR9]) -# -############################################################################### - .globl __flush_tlb_page - .type __flush_tlb_page,@function -__flush_tlb_page: - # kill cached PGE value - setlos #0xffffffff,gr4 - movgs gr4,scr0 - movgs gr4,scr1 - - # specify the context we want to flush - movgs gr8,tplr - - # zap the matching TLB line and AMR values - setlos #~(PAGE_SIZE-1),gr5 - and gr9,gr5,gr9 - tlbpr gr9,gr0,#5,#0 - - bralr - - .size __flush_tlb_page, .-__flush_tlb_page - -############################################################################### -# -# flush a range of addresses from the TLB -# - void __flush_tlb_range(unsigned long contextid [GR8], -# unsigned long start [GR9], -# unsigned long end [GR10]) -# -############################################################################### - .globl __flush_tlb_range - .type __flush_tlb_range,@function -__flush_tlb_range: - # kill cached PGE value - setlos #0xffffffff,gr4 - movgs gr4,scr0 - movgs gr4,scr1 - - # specify the context we want to flush - movgs gr8,tplr - - # round the start down to beginning of TLB line and end up to beginning of next TLB line - setlos.p #~(PAGE_SIZE-1),gr5 - setlos #PAGE_SIZE,gr6 - subi.p gr10,#1,gr10 - and gr9,gr5,gr9 - and gr10,gr5,gr10 -2: - tlbpr gr9,gr0,#5,#0 - subcc.p gr9,gr10,gr0,icc0 - add gr9,gr6,gr9 - bne icc0,#0,2b ; most likely a 1-page flush - - bralr - - .size __flush_tlb_range, .-__flush_tlb_range diff --git a/arch/frv/mm/tlb-miss.S b/arch/frv/mm/tlb-miss.S deleted file mode 100644 index f3ac019bb18b..000000000000 --- a/arch/frv/mm/tlb-miss.S +++ /dev/null @@ -1,629 +0,0 @@ -/* tlb-miss.S: TLB miss handlers - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/sys.h> -#include <linux/linkage.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/spr-regs.h> - - .section .text..tlbmiss - .balign 4 - - .globl __entry_insn_mmu_miss -__entry_insn_mmu_miss: - break - nop - - .globl __entry_insn_mmu_exception -__entry_insn_mmu_exception: - break - nop - - .globl __entry_data_mmu_miss -__entry_data_mmu_miss: - break - nop - - .globl __entry_data_mmu_exception -__entry_data_mmu_exception: - break - nop - -############################################################################### -# -# handle a lookup failure of one sort or another in a kernel TLB handler -# On entry: -# GR29 - faulting address -# SCR2 - saved CCR -# -############################################################################### - .type __tlb_kernel_fault,@function -__tlb_kernel_fault: - # see if we're supposed to re-enable single-step mode upon return - sethi.p %hi(__break_tlb_miss_return_break),gr30 - setlo %lo(__break_tlb_miss_return_break),gr30 - movsg pcsr,gr31 - - subcc gr31,gr30,gr0,icc0 - beq icc0,#0,__tlb_kernel_fault_sstep - - movsg scr2,gr30 - movgs gr30,ccr - movgs gr29,scr2 /* save EAR0 value */ - sethi.p %hi(__kernel_current_task),gr29 - setlo %lo(__kernel_current_task),gr29 - ldi.p @(gr29,#0),gr29 /* restore GR29 */ - - bra __entry_kernel_handle_mmu_fault - - # we've got to re-enable single-stepping -__tlb_kernel_fault_sstep: - sethi.p %hi(__break_tlb_miss_real_return_info),gr30 - setlo %lo(__break_tlb_miss_real_return_info),gr30 - lddi @(gr30,0),gr30 - movgs gr30,pcsr - movgs gr31,psr - - movsg scr2,gr30 - movgs gr30,ccr - movgs gr29,scr2 /* save EAR0 value */ - sethi.p %hi(__kernel_current_task),gr29 - setlo %lo(__kernel_current_task),gr29 - ldi.p @(gr29,#0),gr29 /* restore GR29 */ - bra __entry_kernel_handle_mmu_fault_sstep - - .size __tlb_kernel_fault, .-__tlb_kernel_fault - -############################################################################### -# -# handle a lookup failure of one sort or another in a user TLB handler -# On entry: -# GR28 - faulting address -# SCR2 - saved CCR -# -############################################################################### - .type __tlb_user_fault,@function -__tlb_user_fault: - # see if we're supposed to re-enable single-step mode upon return - sethi.p %hi(__break_tlb_miss_return_break),gr30 - setlo %lo(__break_tlb_miss_return_break),gr30 - movsg pcsr,gr31 - subcc gr31,gr30,gr0,icc0 - beq icc0,#0,__tlb_user_fault_sstep - - movsg scr2,gr30 - movgs gr30,ccr - bra __entry_uspace_handle_mmu_fault - - # we've got to re-enable single-stepping -__tlb_user_fault_sstep: - sethi.p %hi(__break_tlb_miss_real_return_info),gr30 - setlo %lo(__break_tlb_miss_real_return_info),gr30 - lddi @(gr30,0),gr30 - movgs gr30,pcsr - movgs gr31,psr - movsg scr2,gr30 - movgs gr30,ccr - bra __entry_uspace_handle_mmu_fault_sstep - - .size __tlb_user_fault, .-__tlb_user_fault - -############################################################################### -# -# Kernel instruction TLB miss handler -# On entry: -# GR1 - kernel stack pointer -# GR28 - saved exception frame pointer -# GR29 - faulting address -# GR31 - EAR0 ^ SCR0 -# SCR0 - base of virtual range covered by cached PGE from last ITLB miss (or 0xffffffff) -# DAMR3 - mapped page directory -# DAMR4 - mapped page table as matched by SCR0 -# -############################################################################### - .globl __entry_kernel_insn_tlb_miss - .type __entry_kernel_insn_tlb_miss,@function -__entry_kernel_insn_tlb_miss: -#if 0 - sethi.p %hi(0xe1200004),gr30 - setlo %lo(0xe1200004),gr30 - st gr0,@(gr30,gr0) - sethi.p %hi(0xffc00100),gr30 - setlo %lo(0xffc00100),gr30 - sth gr30,@(gr30,gr0) - membar -#endif - - movsg ccr,gr30 /* save CCR */ - movgs gr30,scr2 - - # see if the cached page table mapping is appropriate - srlicc.p gr31,#26,gr0,icc0 - setlos 0x3ffc,gr30 - srli.p gr29,#12,gr31 /* use EAR0[25:14] as PTE index */ - bne icc0,#0,__itlb_k_PTD_miss - -__itlb_k_PTD_mapped: - # access the PTD with EAR0[25:14] - # - DAMLR4 points to the virtual address of the appropriate page table - # - the PTD holds 4096 PTEs - # - the PTD must be accessed uncached - # - the PTE must be marked accessed if it was valid - # - and gr31,gr30,gr31 - movsg damlr4,gr30 - add gr30,gr31,gr31 - ldi @(gr31,#0),gr30 /* fetch the PTE */ - andicc gr30,#_PAGE_PRESENT,gr0,icc0 - ori.p gr30,#_PAGE_ACCESSED,gr30 - beq icc0,#0,__tlb_kernel_fault /* jump if PTE invalid */ - sti.p gr30,@(gr31,#0) /* update the PTE */ - andi gr30,#~_PAGE_ACCESSED,gr30 - - # we're using IAMR1 as an extra TLB entry - # - punt the entry here (if valid) to the real TLB and then replace with the new PTE - # - need to check DAMR1 lest we cause an multiple-DAT-hit exception - # - IAMPR1 has no WP bit, and we mustn't lose WP information - movsg iampr1,gr31 - andicc gr31,#xAMPRx_V,gr0,icc0 - setlos.p 0xfffff000,gr31 - beq icc0,#0,__itlb_k_nopunt /* punt not required */ - - movsg iamlr1,gr31 - movgs gr31,tplr /* set TPLR.CXN */ - tlbpr gr31,gr0,#4,#0 /* delete matches from TLB, IAMR1, DAMR1 */ - - movsg dampr1,gr31 - ori gr31,#xAMPRx_V,gr31 /* entry was invalidated by tlbpr #4 */ - movgs gr31,tppr - movsg iamlr1,gr31 /* set TPLR.CXN */ - movgs gr31,tplr - tlbpr gr31,gr0,#2,#0 /* save to the TLB */ - movsg tpxr,gr31 /* check the TLB write error flag */ - andicc.p gr31,#TPXR_E,gr0,icc0 - setlos #0xfffff000,gr31 - bne icc0,#0,__tlb_kernel_fault - -__itlb_k_nopunt: - - # assemble the new TLB entry - and gr29,gr31,gr29 - movsg cxnr,gr31 - or gr29,gr31,gr29 - movgs gr29,iamlr1 /* xAMLR = address | context number */ - movgs gr30,iampr1 - movgs gr29,damlr1 - movgs gr30,dampr1 - - # return, restoring registers - movsg scr2,gr30 - movgs gr30,ccr - sethi.p %hi(__kernel_current_task),gr29 - setlo %lo(__kernel_current_task),gr29 - ldi @(gr29,#0),gr29 - rett #0 - beq icc0,#3,0 /* prevent icache prefetch */ - - # the PTE we want wasn't in the PTD we have mapped, so we need to go looking for a more - # appropriate page table and map that instead - # - access the PGD with EAR0[31:26] - # - DAMLR3 points to the virtual address of the page directory - # - the PGD holds 64 PGEs and each PGE/PME points to a set of page tables -__itlb_k_PTD_miss: - srli gr29,#26,gr31 /* calculate PGE offset */ - slli gr31,#8,gr31 /* and clear bottom bits */ - - movsg damlr3,gr30 - ld @(gr31,gr30),gr30 /* access the PGE */ - - andicc.p gr30,#_PAGE_PRESENT,gr0,icc0 - andicc gr30,#xAMPRx_SS,gr0,icc1 - - # map this PTD instead and record coverage address - ori.p gr30,#xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr30 - beq icc0,#0,__tlb_kernel_fault /* jump if PGE not present */ - slli.p gr31,#18,gr31 - bne icc1,#0,__itlb_k_bigpage - movgs gr30,dampr4 - movgs gr31,scr0 - - # we can now resume normal service - setlos 0x3ffc,gr30 - srli.p gr29,#12,gr31 /* use EAR0[25:14] as PTE index */ - bra __itlb_k_PTD_mapped - -__itlb_k_bigpage: - break - nop - - .size __entry_kernel_insn_tlb_miss, .-__entry_kernel_insn_tlb_miss - -############################################################################### -# -# Kernel data TLB miss handler -# On entry: -# GR1 - kernel stack pointer -# GR28 - saved exception frame pointer -# GR29 - faulting address -# GR31 - EAR0 ^ SCR1 -# SCR1 - base of virtual range covered by cached PGE from last DTLB miss (or 0xffffffff) -# DAMR3 - mapped page directory -# DAMR5 - mapped page table as matched by SCR1 -# -############################################################################### - .globl __entry_kernel_data_tlb_miss - .type __entry_kernel_data_tlb_miss,@function -__entry_kernel_data_tlb_miss: -#if 0 - sethi.p %hi(0xe1200004),gr30 - setlo %lo(0xe1200004),gr30 - st gr0,@(gr30,gr0) - sethi.p %hi(0xffc00100),gr30 - setlo %lo(0xffc00100),gr30 - sth gr30,@(gr30,gr0) - membar -#endif - - movsg ccr,gr30 /* save CCR */ - movgs gr30,scr2 - - # see if the cached page table mapping is appropriate - srlicc.p gr31,#26,gr0,icc0 - setlos 0x3ffc,gr30 - srli.p gr29,#12,gr31 /* use EAR0[25:14] as PTE index */ - bne icc0,#0,__dtlb_k_PTD_miss - -__dtlb_k_PTD_mapped: - # access the PTD with EAR0[25:14] - # - DAMLR5 points to the virtual address of the appropriate page table - # - the PTD holds 4096 PTEs - # - the PTD must be accessed uncached - # - the PTE must be marked accessed if it was valid - # - and gr31,gr30,gr31 - movsg damlr5,gr30 - add gr30,gr31,gr31 - ldi @(gr31,#0),gr30 /* fetch the PTE */ - andicc gr30,#_PAGE_PRESENT,gr0,icc0 - ori.p gr30,#_PAGE_ACCESSED,gr30 - beq icc0,#0,__tlb_kernel_fault /* jump if PTE invalid */ - sti.p gr30,@(gr31,#0) /* update the PTE */ - andi gr30,#~_PAGE_ACCESSED,gr30 - - # we're using DAMR1 as an extra TLB entry - # - punt the entry here (if valid) to the real TLB and then replace with the new PTE - # - need to check IAMR1 lest we cause an multiple-DAT-hit exception - movsg dampr1,gr31 - andicc gr31,#xAMPRx_V,gr0,icc0 - setlos.p 0xfffff000,gr31 - beq icc0,#0,__dtlb_k_nopunt /* punt not required */ - - movsg damlr1,gr31 - movgs gr31,tplr /* set TPLR.CXN */ - tlbpr gr31,gr0,#4,#0 /* delete matches from TLB, IAMR1, DAMR1 */ - - movsg dampr1,gr31 - ori gr31,#xAMPRx_V,gr31 /* entry was invalidated by tlbpr #4 */ - movgs gr31,tppr - movsg damlr1,gr31 /* set TPLR.CXN */ - movgs gr31,tplr - tlbpr gr31,gr0,#2,#0 /* save to the TLB */ - movsg tpxr,gr31 /* check the TLB write error flag */ - andicc.p gr31,#TPXR_E,gr0,icc0 - setlos #0xfffff000,gr31 - bne icc0,#0,__tlb_kernel_fault - -__dtlb_k_nopunt: - - # assemble the new TLB entry - and gr29,gr31,gr29 - movsg cxnr,gr31 - or gr29,gr31,gr29 - movgs gr29,iamlr1 /* xAMLR = address | context number */ - movgs gr30,iampr1 - movgs gr29,damlr1 - movgs gr30,dampr1 - - # return, restoring registers - movsg scr2,gr30 - movgs gr30,ccr - sethi.p %hi(__kernel_current_task),gr29 - setlo %lo(__kernel_current_task),gr29 - ldi @(gr29,#0),gr29 - rett #0 - beq icc0,#3,0 /* prevent icache prefetch */ - - # the PTE we want wasn't in the PTD we have mapped, so we need to go looking for a more - # appropriate page table and map that instead - # - access the PGD with EAR0[31:26] - # - DAMLR3 points to the virtual address of the page directory - # - the PGD holds 64 PGEs and each PGE/PME points to a set of page tables -__dtlb_k_PTD_miss: - srli gr29,#26,gr31 /* calculate PGE offset */ - slli gr31,#8,gr31 /* and clear bottom bits */ - - movsg damlr3,gr30 - ld @(gr31,gr30),gr30 /* access the PGE */ - - andicc.p gr30,#_PAGE_PRESENT,gr0,icc0 - andicc gr30,#xAMPRx_SS,gr0,icc1 - - # map this PTD instead and record coverage address - ori.p gr30,#xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr30 - beq icc0,#0,__tlb_kernel_fault /* jump if PGE not present */ - slli.p gr31,#18,gr31 - bne icc1,#0,__dtlb_k_bigpage - movgs gr30,dampr5 - movgs gr31,scr1 - - # we can now resume normal service - setlos 0x3ffc,gr30 - srli.p gr29,#12,gr31 /* use EAR0[25:14] as PTE index */ - bra __dtlb_k_PTD_mapped - -__dtlb_k_bigpage: - break - nop - - .size __entry_kernel_data_tlb_miss, .-__entry_kernel_data_tlb_miss - -############################################################################### -# -# Userspace instruction TLB miss handler (with PGE prediction) -# On entry: -# GR28 - faulting address -# GR31 - EAR0 ^ SCR0 -# SCR0 - base of virtual range covered by cached PGE from last ITLB miss (or 0xffffffff) -# DAMR3 - mapped page directory -# DAMR4 - mapped page table as matched by SCR0 -# -############################################################################### - .globl __entry_user_insn_tlb_miss - .type __entry_user_insn_tlb_miss,@function -__entry_user_insn_tlb_miss: -#if 0 - sethi.p %hi(0xe1200004),gr30 - setlo %lo(0xe1200004),gr30 - st gr0,@(gr30,gr0) - sethi.p %hi(0xffc00100),gr30 - setlo %lo(0xffc00100),gr30 - sth gr30,@(gr30,gr0) - membar -#endif - - movsg ccr,gr30 /* save CCR */ - movgs gr30,scr2 - - # see if the cached page table mapping is appropriate - srlicc.p gr31,#26,gr0,icc0 - setlos 0x3ffc,gr30 - srli.p gr28,#12,gr31 /* use EAR0[25:14] as PTE index */ - bne icc0,#0,__itlb_u_PTD_miss - -__itlb_u_PTD_mapped: - # access the PTD with EAR0[25:14] - # - DAMLR4 points to the virtual address of the appropriate page table - # - the PTD holds 4096 PTEs - # - the PTD must be accessed uncached - # - the PTE must be marked accessed if it was valid - # - and gr31,gr30,gr31 - movsg damlr4,gr30 - add gr30,gr31,gr31 - ldi @(gr31,#0),gr30 /* fetch the PTE */ - andicc gr30,#_PAGE_PRESENT,gr0,icc0 - ori.p gr30,#_PAGE_ACCESSED,gr30 - beq icc0,#0,__tlb_user_fault /* jump if PTE invalid */ - sti.p gr30,@(gr31,#0) /* update the PTE */ - andi gr30,#~_PAGE_ACCESSED,gr30 - - # we're using IAMR1/DAMR1 as an extra TLB entry - # - punt the entry here (if valid) to the real TLB and then replace with the new PTE - movsg dampr1,gr31 - andicc gr31,#xAMPRx_V,gr0,icc0 - setlos.p 0xfffff000,gr31 - beq icc0,#0,__itlb_u_nopunt /* punt not required */ - - movsg dampr1,gr31 - movgs gr31,tppr - movsg damlr1,gr31 /* set TPLR.CXN */ - movgs gr31,tplr - tlbpr gr31,gr0,#2,#0 /* save to the TLB */ - movsg tpxr,gr31 /* check the TLB write error flag */ - andicc.p gr31,#TPXR_E,gr0,icc0 - setlos #0xfffff000,gr31 - bne icc0,#0,__tlb_user_fault - -__itlb_u_nopunt: - - # assemble the new TLB entry - and gr28,gr31,gr28 - movsg cxnr,gr31 - or gr28,gr31,gr28 - movgs gr28,iamlr1 /* xAMLR = address | context number */ - movgs gr30,iampr1 - movgs gr28,damlr1 - movgs gr30,dampr1 - - # return, restoring registers - movsg scr2,gr30 - movgs gr30,ccr - rett #0 - beq icc0,#3,0 /* prevent icache prefetch */ - - # the PTE we want wasn't in the PTD we have mapped, so we need to go looking for a more - # appropriate page table and map that instead - # - access the PGD with EAR0[31:26] - # - DAMLR3 points to the virtual address of the page directory - # - the PGD holds 64 PGEs and each PGE/PME points to a set of page tables -__itlb_u_PTD_miss: - srli gr28,#26,gr31 /* calculate PGE offset */ - slli gr31,#8,gr31 /* and clear bottom bits */ - - movsg damlr3,gr30 - ld @(gr31,gr30),gr30 /* access the PGE */ - - andicc.p gr30,#_PAGE_PRESENT,gr0,icc0 - andicc gr30,#xAMPRx_SS,gr0,icc1 - - # map this PTD instead and record coverage address - ori.p gr30,#xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr30 - beq icc0,#0,__tlb_user_fault /* jump if PGE not present */ - slli.p gr31,#18,gr31 - bne icc1,#0,__itlb_u_bigpage - movgs gr30,dampr4 - movgs gr31,scr0 - - # we can now resume normal service - setlos 0x3ffc,gr30 - srli.p gr28,#12,gr31 /* use EAR0[25:14] as PTE index */ - bra __itlb_u_PTD_mapped - -__itlb_u_bigpage: - break - nop - - .size __entry_user_insn_tlb_miss, .-__entry_user_insn_tlb_miss - -############################################################################### -# -# Userspace data TLB miss handler -# On entry: -# GR28 - faulting address -# GR31 - EAR0 ^ SCR1 -# SCR1 - base of virtual range covered by cached PGE from last DTLB miss (or 0xffffffff) -# DAMR3 - mapped page directory -# DAMR5 - mapped page table as matched by SCR1 -# -############################################################################### - .globl __entry_user_data_tlb_miss - .type __entry_user_data_tlb_miss,@function -__entry_user_data_tlb_miss: -#if 0 - sethi.p %hi(0xe1200004),gr30 - setlo %lo(0xe1200004),gr30 - st gr0,@(gr30,gr0) - sethi.p %hi(0xffc00100),gr30 - setlo %lo(0xffc00100),gr30 - sth gr30,@(gr30,gr0) - membar -#endif - - movsg ccr,gr30 /* save CCR */ - movgs gr30,scr2 - - # see if the cached page table mapping is appropriate - srlicc.p gr31,#26,gr0,icc0 - setlos 0x3ffc,gr30 - srli.p gr28,#12,gr31 /* use EAR0[25:14] as PTE index */ - bne icc0,#0,__dtlb_u_PTD_miss - -__dtlb_u_PTD_mapped: - # access the PTD with EAR0[25:14] - # - DAMLR5 points to the virtual address of the appropriate page table - # - the PTD holds 4096 PTEs - # - the PTD must be accessed uncached - # - the PTE must be marked accessed if it was valid - # - and gr31,gr30,gr31 - movsg damlr5,gr30 - -__dtlb_u_using_iPTD: - add gr30,gr31,gr31 - ldi @(gr31,#0),gr30 /* fetch the PTE */ - andicc gr30,#_PAGE_PRESENT,gr0,icc0 - ori.p gr30,#_PAGE_ACCESSED,gr30 - beq icc0,#0,__tlb_user_fault /* jump if PTE invalid */ - sti.p gr30,@(gr31,#0) /* update the PTE */ - andi gr30,#~_PAGE_ACCESSED,gr30 - - # we're using DAMR1 as an extra TLB entry - # - punt the entry here (if valid) to the real TLB and then replace with the new PTE - movsg dampr1,gr31 - andicc gr31,#xAMPRx_V,gr0,icc0 - setlos.p 0xfffff000,gr31 - beq icc0,#0,__dtlb_u_nopunt /* punt not required */ - - movsg dampr1,gr31 - movgs gr31,tppr - movsg damlr1,gr31 /* set TPLR.CXN */ - movgs gr31,tplr - tlbpr gr31,gr0,#2,#0 /* save to the TLB */ - movsg tpxr,gr31 /* check the TLB write error flag */ - andicc.p gr31,#TPXR_E,gr0,icc0 - setlos #0xfffff000,gr31 - bne icc0,#0,__tlb_user_fault - -__dtlb_u_nopunt: - - # assemble the new TLB entry - and gr28,gr31,gr28 - movsg cxnr,gr31 - or gr28,gr31,gr28 - movgs gr28,iamlr1 /* xAMLR = address | context number */ - movgs gr30,iampr1 - movgs gr28,damlr1 - movgs gr30,dampr1 - - # return, restoring registers - movsg scr2,gr30 - movgs gr30,ccr - rett #0 - beq icc0,#3,0 /* prevent icache prefetch */ - - # the PTE we want wasn't in the PTD we have mapped, so we need to go looking for a more - # appropriate page table and map that instead - # - first of all, check the insn PGE cache - we may well get a hit there - # - access the PGD with EAR0[31:26] - # - DAMLR3 points to the virtual address of the page directory - # - the PGD holds 64 PGEs and each PGE/PME points to a set of page tables -__dtlb_u_PTD_miss: - movsg scr0,gr31 /* consult the insn-PGE-cache key */ - xor gr28,gr31,gr31 - srlicc gr31,#26,gr0,icc0 - srli gr28,#12,gr31 /* use EAR0[25:14] as PTE index */ - bne icc0,#0,__dtlb_u_iPGE_miss - - # what we're looking for is covered by the insn-PGE-cache - setlos 0x3ffc,gr30 - and gr31,gr30,gr31 - movsg damlr4,gr30 - bra __dtlb_u_using_iPTD - -__dtlb_u_iPGE_miss: - srli gr28,#26,gr31 /* calculate PGE offset */ - slli gr31,#8,gr31 /* and clear bottom bits */ - - movsg damlr3,gr30 - ld @(gr31,gr30),gr30 /* access the PGE */ - - andicc.p gr30,#_PAGE_PRESENT,gr0,icc0 - andicc gr30,#xAMPRx_SS,gr0,icc1 - - # map this PTD instead and record coverage address - ori.p gr30,#xAMPRx_L|xAMPRx_SS_16Kb|xAMPRx_S|xAMPRx_C|xAMPRx_V,gr30 - beq icc0,#0,__tlb_user_fault /* jump if PGE not present */ - slli.p gr31,#18,gr31 - bne icc1,#0,__dtlb_u_bigpage - movgs gr30,dampr5 - movgs gr31,scr1 - - # we can now resume normal service - setlos 0x3ffc,gr30 - srli.p gr28,#12,gr31 /* use EAR0[25:14] as PTE index */ - bra __dtlb_u_PTD_mapped - -__dtlb_u_bigpage: - break - nop - - .size __entry_user_data_tlb_miss, .-__entry_user_data_tlb_miss |