diff options
Diffstat (limited to 'arch/cris/boot/compressed/head_v32.S')
-rw-r--r-- | arch/cris/boot/compressed/head_v32.S | 146 |
1 files changed, 0 insertions, 146 deletions
diff --git a/arch/cris/boot/compressed/head_v32.S b/arch/cris/boot/compressed/head_v32.S deleted file mode 100644 index a997947d31e3..000000000000 --- a/arch/cris/boot/compressed/head_v32.S +++ /dev/null @@ -1,146 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Code that sets up the DRAM registers, calls the - * decompressor to unpack the piggybacked kernel, and jumps. - * - * Copyright (C) 1999 - 2006, Axis Communications AB - */ - -#define ASSEMBLER_MACROS_ONLY -#include <hwregs/asm/reg_map_asm.h> -#include <mach/startup.inc> - -#define RAM_INIT_MAGIC 0x56902387 -#define COMMAND_LINE_MAGIC 0x87109563 - - ;; Exported symbols - - .globl input_data - - .text -start: - di - - ;; Start clocks for used blocks. - START_CLOCKS - - ;; Initialize the DRAM registers. - cmp.d RAM_INIT_MAGIC, $r8 ; Already initialized? - beq dram_init_finished - nop - -#if defined CONFIG_ETRAXFS -#include "../../arch-v32/mach-fs/dram_init.S" -#elif defined CONFIG_CRIS_MACH_ARTPEC3 -#include "../../arch-v32/mach-a3/dram_init.S" -#else -#error Only ETRAXFS and ARTPEC-3 supported! -#endif - -dram_init_finished: - - GIO_INIT - ;; Setup the stack to a suitably high address. - ;; We assume 8 MB is the minimum DRAM and put - ;; the SP at the top for now. - - move.d 0x40800000, $sp - - ;; Figure out where the compressed piggyback image is. - ;; It is either in [NOR] flash (we don't want to copy it - ;; to DRAM before unpacking), or copied to DRAM - ;; by the [NAND] flash boot loader. - ;; The piggyback image is at _edata, but relative to where the - ;; image is actually located in memory, not where it is linked - ;; (the decompressor is linked at 0x40700000+ and runs there). - ;; Use (_edata - herami) as offset to the current PC. - -hereami: - lapcq ., $r5 ; get PC - and.d 0x7fffffff, $r5 ; strip any non-cache bit - move.d $r5, $r0 ; source address of 'herami' - add.d _edata, $r5 - sub.d hereami, $r5 ; r5 = flash address of '_edata' - move.d hereami, $r1 ; destination - - ;; Copy text+data to DRAM - - move.d _edata, $r2 ; end destination -1: move.w [$r0+], $r3 ; from herami+ source - move.w $r3, [$r1+] ; to hereami+ destination (linked address) - cmp.d $r2, $r1 ; finish when destination == _edata - bcs 1b - nop - move.d input_data, $r0 ; for the decompressor - move.d $r5, [$r0] ; for the decompressor - - ;; Clear the decompressors BSS (between _edata and _end) - - moveq 0, $r0 - move.d _edata, $r1 - move.d _end, $r2 -1: move.w $r0, [$r1+] - cmp.d $r2, $r1 - bcs 1b - nop - - ;; Save command line magic and address. - move.d _cmd_line_magic, $r0 - move.d $r10, [$r0] - move.d _cmd_line_addr, $r0 - move.d $r11, [$r0] - - ;; Save boot source indicator - move.d _boot_source, $r0 - move.d $r12, [$r0] - - ;; Do the decompression and save compressed size in _inptr - - jsr decompress_kernel - nop - - ;; Restore boot source indicator - move.d _boot_source, $r12 - move.d [$r12], $r12 - - ;; Restore command line magic and address. - move.d _cmd_line_magic, $r10 - move.d [$r10], $r10 - move.d _cmd_line_addr, $r11 - move.d [$r11], $r11 - - ;; Put start address of root partition in r9 so the kernel can use it - ;; when mounting from flash - move.d input_data, $r0 - move.d [$r0], $r9 ; flash address of compressed kernel - move.d inptr, $r0 - add.d [$r0], $r9 ; size of compressed kernel - cmp.d 0x40000000, $r9 ; image in DRAM ? - blo enter_kernel ; no, must be [NOR] flash, jump - nop ; delay slot - and.d 0x001fffff, $r9 ; assume compressed kernel was < 2M - -enter_kernel: - ;; Enter the decompressed kernel - move.d RAM_INIT_MAGIC, $r8 ; Tell kernel that DRAM is initialized - jump 0x40004000 ; kernel is linked to this address - nop - - .data - -input_data: - .dword 0 ; used by the decompressor -_cmd_line_magic: - .dword 0 -_cmd_line_addr: - .dword 0 -_boot_source: - .dword 0 - -#if defined CONFIG_ETRAXFS -#include "../../arch-v32/mach-fs/hw_settings.S" -#elif defined CONFIG_CRIS_MACH_ARTPEC3 -#include "../../arch-v32/mach-a3/hw_settings.S" -#else -#error Only ETRAXFS and ARTPEC-3 supported! -#endif |