diff options
Diffstat (limited to 'arch/blackfin/mach-bf561/include/mach/defBF561.h')
| -rw-r--r-- | arch/blackfin/mach-bf561/include/mach/defBF561.h | 94 |
1 files changed, 17 insertions, 77 deletions
diff --git a/arch/blackfin/mach-bf561/include/mach/defBF561.h b/arch/blackfin/mach-bf561/include/mach/defBF561.h index 2674f0097576..79e048d452e0 100644 --- a/arch/blackfin/mach-bf561/include/mach/defBF561.h +++ b/arch/blackfin/mach-bf561/include/mach/defBF561.h @@ -28,32 +28,29 @@ #define CHIPID 0xFFC00014 /* Chip ID Register */ /* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */ -#define SWRST SICA_SWRST -#define SYSCR SICA_SYSCR #define DOUBLE_FAULT (DOUBLE_FAULT_B|DOUBLE_FAULT_A) #define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A) #define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A) #define RESET_SOFTWARE (SWRST_OCCURRED) /* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */ -#define SICA_SWRST 0xFFC00100 /* Software Reset register */ -#define SICA_SYSCR 0xFFC00104 /* System Reset Configuration register */ -#define SICA_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ -#define SICA_IMASK 0xFFC0010C /* SIC Interrupt Mask register 0 - hack to fix old tests */ -#define SICA_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */ -#define SICA_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */ -#define SICA_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ -#define SICA_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ -#define SICA_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ -#define SICA_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */ -#define SICA_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */ -#define SICA_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */ -#define SICA_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */ -#define SICA_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */ -#define SICA_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */ -#define SICA_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */ -#define SICA_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ -#define SICA_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */ +#define SWRST 0xFFC00100 /* Software Reset register */ +#define SYSCR 0xFFC00104 /* System Reset Configuration register */ +#define SIC_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */ +#define SIC_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */ +#define SIC_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */ +#define SIC_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */ +#define SIC_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */ +#define SIC_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */ +#define SIC_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */ +#define SIC_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */ +#define SIC_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */ +#define SIC_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */ +#define SIC_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */ +#define SIC_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */ +#define SIC_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */ +#define SIC_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */ +#define SIC_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */ /* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */ #define SICB_SWRST 0xFFC01100 /* reserved */ @@ -1271,63 +1268,6 @@ #define PF14_P 14 #define PF15_P 15 -/* *********** SERIAL PERIPHERAL INTERFACE (SPI) MASKS **************** */ - -/* SPI_CTL Masks */ -#define TIMOD 0x00000003 /* Transfer initiation mode and interrupt generation */ -#define SZ 0x00000004 /* Send Zero (=0) or last (=1) word when TDBR empty. */ -#define GM 0x00000008 /* When RDBR full, get more (=1) data or discard (=0) incoming Data */ -#define PSSE 0x00000010 /* Enable (=1) Slave-Select input for Master. */ -#define EMISO 0x00000020 /* Enable (=1) MISO pin as an output. */ -#define SIZE 0x00000100 /* Word length (0 => 8 bits, 1 => 16 bits) */ -#define LSBF 0x00000200 /* Data format (0 => MSB sent/received first 1 => LSB sent/received first) */ -#define CPHA 0x00000400 /* Clock phase (0 => SPICLK starts toggling in middle of xfer, 1 => SPICLK toggles at the beginning of xfer. */ -#define CPOL 0x00000800 /* Clock polarity (0 => active-high, 1 => active-low) */ -#define MSTR 0x00001000 /* Configures SPI as master (=1) or slave (=0) */ -#define WOM 0x00002000 /* Open drain (=1) data output enable (for MOSI and MISO) */ -#define SPE 0x00004000 /* SPI module enable (=1), disable (=0) */ - -/* SPI_FLG Masks */ -#define FLS1 0x00000002 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLS2 0x00000004 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLS3 0x00000008 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLS4 0x00000010 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLS5 0x00000020 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLS6 0x00000040 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLS7 0x00000080 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ -#define FLG1 0x00000200 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLG2 0x00000400 /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLG3 0x00000800 /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLG4 0x00001000 /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLG5 0x00002000 /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLG6 0x00004000 /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLG7 0x00008000 /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ - -/* SPI_FLG Bit Positions */ -#define FLS1_P 0x00000001 /* Enables (=1) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLS2_P 0x00000002 /* Enables (=1) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLS3_P 0x00000003 /* Enables (=1) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLS4_P 0x00000004 /* Enables (=1) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLS5_P 0x00000005 /* Enables (=1) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLS6_P 0x00000006 /* Enables (=1) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLS7_P 0x00000007 /* Enables (=1) SPI_FLOUT7 as flag output for SPI Slave-select */ -#define FLG1_P 0x00000009 /* Activates (=0) SPI_FLOUT1 as flag output for SPI Slave-select */ -#define FLG2_P 0x0000000A /* Activates (=0) SPI_FLOUT2 as flag output for SPI Slave-select */ -#define FLG3_P 0x0000000B /* Activates (=0) SPI_FLOUT3 as flag output for SPI Slave-select */ -#define FLG4_P 0x0000000C /* Activates (=0) SPI_FLOUT4 as flag output for SPI Slave-select */ -#define FLG5_P 0x0000000D /* Activates (=0) SPI_FLOUT5 as flag output for SPI Slave-select */ -#define FLG6_P 0x0000000E /* Activates (=0) SPI_FLOUT6 as flag output for SPI Slave-select */ -#define FLG7_P 0x0000000F /* Activates (=0) SPI_FLOUT7 as flag output for SPI Slave-select */ - -/* SPI_STAT Masks */ -#define SPIF 0x00000001 /* Set (=1) when SPI single-word transfer complete */ -#define MODF 0x00000002 /* Set (=1) in a master device when some other device tries to become master */ -#define TXE 0x00000004 /* Set (=1) when transmission occurs with no new data in SPI_TDBR */ -#define TXS 0x00000008 /* SPI_TDBR Data Buffer Status (0=Empty, 1=Full) */ -#define RBSY 0x00000010 /* Set (=1) when data is received with RDBR full */ -#define RXS 0x00000020 /* SPI_RDBR Data Buffer Status (0=Empty, 1=Full) */ -#define TXCOL 0x00000040 /* When set (=1), corrupt data may have been transmitted */ - /* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */ /* AMGCTL Masks */ |