diff options
Diffstat (limited to 'arch/blackfin/mach-bf537')
| -rw-r--r-- | arch/blackfin/mach-bf537/Makefile | 2 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/boards/cm_bf537.c | 58 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/boards/generic_board.c | 34 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/boards/minotaur.c | 36 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/boards/pnav10.c | 31 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/boards/stamp.c | 93 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/cpu.c | 159 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/dma.c | 5 | ||||
| -rw-r--r-- | arch/blackfin/mach-bf537/head.S | 46 |
9 files changed, 254 insertions, 210 deletions
diff --git a/arch/blackfin/mach-bf537/Makefile b/arch/blackfin/mach-bf537/Makefile index 7e7c9c8ac5b2..68e5478e95a9 100644 --- a/arch/blackfin/mach-bf537/Makefile +++ b/arch/blackfin/mach-bf537/Makefile @@ -5,5 +5,3 @@ extra-y := head.o obj-y := ints-priority.o dma.o - -obj-$(CONFIG_CPU_FREQ) += cpu.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index f7c1f964f13b..d8a23cd9b9ed 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -325,6 +325,54 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -393,6 +441,14 @@ static struct platform_device *cm_bf537_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) &bfin_sport0_uart_device, &bfin_sport1_uart_device, @@ -425,7 +481,7 @@ static struct platform_device *cm_bf537_devices[] __initdata = { static int __init cm_bf537_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index c95395ba7bfa..7d250828dad8 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -90,7 +90,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -554,6 +554,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -674,6 +700,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -690,7 +720,7 @@ static struct platform_device *stamp_devices[] __initdata = { static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index d71e0be33921..18ddf7a52005 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -8,12 +8,12 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) -#include <linux/usb_isp1362.h> +#include <linux/usb/isp1362.h> #endif #include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/usb_sl811.h> +#include <linux/usb/sl811.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/reboot.h> @@ -225,6 +225,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -284,6 +310,10 @@ static struct platform_device *minotaur_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -297,7 +327,7 @@ static struct platform_device *minotaur_devices[] __initdata = { static int __init minotaur_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(minotaur_devices, ARRAY_SIZE(minotaur_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 509a8a236fd0..51c3bab14a69 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -452,6 +452,31 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) @@ -493,11 +518,15 @@ static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif }; static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index ea83148993da..0cec14b1ef5c 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -41,6 +41,7 @@ #include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/i2c.h> #include <linux/usb/sl811.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -90,7 +91,7 @@ int __init bfin_isp1761_init(void) { unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); return platform_add_devices(bfin_isp1761_devices, num_devices); @@ -353,6 +354,7 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition stamp_partitions[] = { { .name = "Bootloader", @@ -395,6 +397,7 @@ static struct platform_device stamp_flash_device = { .num_resources = 1, .resource = &stamp_flash_resource, }; +#endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ @@ -500,6 +503,15 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif +#if defined(CONFIG_MTD_DATAFLASH) \ + || defined(CONFIG_MTD_DATAFLASH_MODULE) +/* DataFlash chip */ +static struct bfin5xx_spi_chip data_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) @@ -514,7 +526,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { .mode = SPI_MODE_3, }, #endif - +#if defined(CONFIG_MTD_DATAFLASH) \ + || defined(CONFIG_MTD_DATAFLASH_MODULE) + { /* DataFlash chip */ + .modalias = "mtd_dataflash", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .controller_data = &data_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif #if defined(CONFIG_SPI_ADC_BF533) \ || defined(CONFIG_SPI_ADC_BF533_MODULE) { @@ -676,6 +698,32 @@ static struct platform_device bfin_uart_device = { }; #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -698,6 +746,31 @@ static struct platform_device i2c_bfin_twi_device = { }; #endif +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_JOYSTICK_AD7142) || defined(CONFIG_JOYSTICK_AD7142_MODULE) + { + I2C_BOARD_INFO("ad7142_joystick", 0x2C), + .type = "ad7142_joystick", + .irq = 55, + }, +#endif +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = 72, + }, +#endif +}; +#endif + #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", @@ -800,6 +873,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_uart_device, #endif +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) &i2c_bfin_twi_device, #endif @@ -818,12 +895,21 @@ static struct platform_device *stamp_devices[] __initdata = { #endif &bfin_gpios_device, + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &stamp_flash_device, +#endif }; static int __init stamp_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, @@ -833,6 +919,7 @@ static int __init stamp_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif + return 0; } diff --git a/arch/blackfin/mach-bf537/cpu.c b/arch/blackfin/mach-bf537/cpu.c deleted file mode 100644 index 0442c4c7f723..000000000000 --- a/arch/blackfin/mach-bf537/cpu.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * File: arch/blackfin/mach-bf537/cpu.c - * Based on: - * Author: michael.kang@analog.com - * - * Created: - * Description: clock scaling for the bf537 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <asm/dpmc.h> -#include <linux/fs.h> -#include <asm/bfin-global.h> - -/* CONFIG_CLKIN_HZ=11059200 */ -#define VCO5 (CONFIG_CLKIN_HZ*45) /*497664000 */ -#define VCO4 (CONFIG_CLKIN_HZ*36) /*398131200 */ -#define VCO3 (CONFIG_CLKIN_HZ*27) /*298598400 */ -#define VCO2 (CONFIG_CLKIN_HZ*18) /*199065600 */ -#define VCO1 (CONFIG_CLKIN_HZ*9) /*99532800 */ -#define VCO(x) VCO##x - -#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)} -/* frequency */ -static struct cpufreq_frequency_table bf537_freq_table[] = { - MFREQ(1), - MFREQ(3), - {VCO4, VCO4 / 2}, {VCO4, VCO4}, - MFREQ(5), - {0, CPUFREQ_TABLE_END}, -}; - -/* - * dpmc_fops->ioctl() - * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) - */ -static int bf537_getfreq(unsigned int cpu) -{ - unsigned long cclk_mhz; - - /* The driver only support single cpu */ - if (cpu == 0) - dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz); - else - cclk_mhz = -1; - - return cclk_mhz; -} - -static int bf537_target(struct cpufreq_policy *policy, - unsigned int target_freq, unsigned int relation) -{ - unsigned long cclk_mhz; - unsigned long vco_mhz; - unsigned long flags; - unsigned int index; - struct cpufreq_freqs freqs; - - if (cpufreq_frequency_table_target(policy, bf537_freq_table, target_freq, relation, &index)) - return -EINVAL; - - cclk_mhz = bf537_freq_table[index].frequency; - vco_mhz = bf537_freq_table[index].index; - - dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz); - freqs.old = bf537_getfreq(0); - freqs.new = cclk_mhz; - freqs.cpu = 0; - - pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n", - cclk_mhz, vco_mhz, index, target_freq, freqs.old); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - local_irq_save(flags); - dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz); - local_irq_restore(flags); - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - vco_mhz = get_vco(); - cclk_mhz = get_cclk(); - return 0; -} - -/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on - * this platform, anyway. - */ -static int bf537_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, &bf537_freq_table); -} - -static int __init __bf537_cpu_init(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - policy->governor = CPUFREQ_DEFAULT_GOVERNOR; - - policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL; - /*Now ,only support one cpu */ - policy->cur = bf537_getfreq(0); - cpufreq_frequency_table_get_attr(bf537_freq_table, policy->cpu); - return cpufreq_frequency_table_cpuinfo(policy, bf537_freq_table); -} - -static struct freq_attr *bf537_freq_attr[] = { - &cpufreq_freq_attr_scaling_available_freqs, - NULL, -}; - -static struct cpufreq_driver bf537_driver = { - .verify = bf537_verify_speed, - .target = bf537_target, - .get = bf537_getfreq, - .init = __bf537_cpu_init, - .name = "bf537", - .owner = THIS_MODULE, - .attr = bf537_freq_attr, -}; - -static int __init bf537_cpu_init(void) -{ - return cpufreq_register_driver(&bf537_driver); -} - -static void __exit bf537_cpu_exit(void) -{ - cpufreq_unregister_driver(&bf537_driver); -} - -MODULE_AUTHOR("Mickael Kang"); -MODULE_DESCRIPTION("cpufreq driver for BF537 CPU"); -MODULE_LICENSE("GPL"); - -module_init(bf537_cpu_init); -module_exit(bf537_cpu_exit); diff --git a/arch/blackfin/mach-bf537/dma.c b/arch/blackfin/mach-bf537/dma.c index 706cb97b0265..4edb363ff99c 100644 --- a/arch/blackfin/mach-bf537/dma.c +++ b/arch/blackfin/mach-bf537/dma.c @@ -26,10 +26,12 @@ * to the Free Software Foundation, Inc., * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/module.h> + #include <asm/blackfin.h> #include <asm/dma.h> -struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { +struct dma_register *dma_io_base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) DMA0_NEXT_DESC_PTR, (struct dma_register *) DMA1_NEXT_DESC_PTR, (struct dma_register *) DMA2_NEXT_DESC_PTR, @@ -47,6 +49,7 @@ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = { (struct dma_register *) MDMA_D1_NEXT_DESC_PTR, (struct dma_register *) MDMA_S1_NEXT_DESC_PTR, }; +EXPORT_SYMBOL(dma_io_base_addr); int channel2irq(unsigned int channel) { diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 3014fe8dd155..48cd58a410a0 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -37,9 +37,6 @@ #include <asm/mach/mem_init.h> #endif -.global __rambase -.global __ramstart -.global __ramend .extern ___bss_stop .extern ___bss_start .extern _bf53x_relocate_l1_mem @@ -180,40 +177,28 @@ ENTRY(__start) SSYNC; #endif -#ifdef CONFIG_BF537_PORT_H - p0.h = hi(PORTH_FER); - p0.l = lo(PORTH_FER); - R0.L = W[P0]; /* Read */ - SSYNC; - R0 = 0x0000; - W[P0] = R0.L; /* Write */ - SSYNC; - W[P0] = R0.L; /* Disable peripheral function of PORTH */ - SSYNC; -#endif - /* Initialise UART - when booting from u-boot, the UART is not disabled * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART_LCR); - p0.l = lo(UART_LCR); + p0.h = hi(BFIN_UART_LCR); + p0.l = lo(BFIN_UART_LCR); r0 = 0x0(Z); w[p0] = r0.L; /* To enable DLL writes */ ssync; - p0.h = hi(UART_DLL); - p0.l = lo(UART_DLL); + p0.h = hi(BFIN_UART_DLL); + p0.l = lo(BFIN_UART_DLL); r0 = 0x0(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_DLH); - p0.l = lo(UART_DLH); + p0.h = hi(BFIN_UART_DLH); + p0.l = lo(BFIN_UART_DLH); r0 = 0x00(Z); w[p0] = r0.L; ssync; - p0.h = hi(UART_GCTL); - p0.l = lo(UART_GCTL); + p0.h = hi(BFIN_UART_GCTL); + p0.l = lo(BFIN_UART_GCTL); r0 = 0x0(Z); w[p0] = r0.L; /* To enable UART clock */ ssync; @@ -483,18 +468,3 @@ ENTRY(_start_dma_code) RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -.data - -/* - * Set up the usable of RAM stuff. Size of RAM is determined then - * an initial stack set up at the end. - */ - -.align 4 -__rambase: -.long 0 -__ramstart: -.long 0 -__ramend: -.long 0 |