summaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf537/head.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf537/head.S')
-rw-r--r--arch/blackfin/mach-bf537/head.S338
1 files changed, 7 insertions, 331 deletions
diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S
index 48cd58a410a0..f5c94bf80e3b 100644
--- a/arch/blackfin/mach-bf537/head.S
+++ b/arch/blackfin/mach-bf537/head.S
@@ -30,327 +30,13 @@
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
-#include <asm/trace.h>
-
-#if CONFIG_BFIN_KERNEL_CLOCK
-#include <asm/mach-common/clocks.h>
-#include <asm/mach/mem_init.h>
-#endif
-
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK 0xFFB01000
-
-__INIT
-
-ENTRY(__start)
- /* R0: argument of command line string, passed from uboot, save it */
- R7 = R0;
- /* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
- R0 = SYSCFG_SNEN;
-#else
- R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
- SYSCFG = R0;
- R0 = 0;
-
- /* Clear Out All the data and pointer Registers */
- R1 = R0;
- R2 = R0;
- R3 = R0;
- R4 = R0;
- R5 = R0;
- R6 = R0;
-
- P0 = R0;
- P1 = R0;
- P2 = R0;
- P3 = R0;
- P4 = R0;
- P5 = R0;
-
- LC0 = r0;
- LC1 = r0;
- L0 = r0;
- L1 = r0;
- L2 = r0;
- L3 = r0;
-
- /* Clear Out All the DAG Registers */
- B0 = r0;
- B1 = r0;
- B2 = r0;
- B3 = r0;
-
- I0 = r0;
- I1 = r0;
- I2 = r0;
- I3 = r0;
-
- M0 = r0;
- M1 = r0;
- M2 = r0;
- M3 = r0;
-
- trace_buffer_init(p0,r0);
- P0 = R1;
- R0 = R1;
-
- /* Turn off the icache */
- p0.l = LO(IMEM_CONTROL);
- p0.h = HI(IMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENICPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Turn off the dcache */
- p0.l = LO(DMEM_CONTROL);
- p0.h = HI(DMEM_CONTROL);
- R1 = [p0];
- R0 = ~ENDCPLB;
- R0 = R0 & R1;
-
- /* Anomaly 05000125 */
-#if ANOMALY_05000125
- CLI R2;
- SSYNC;
-#endif
- [p0] = R0;
- SSYNC;
-#if ANOMALY_05000125
- STI R2;
-#endif
-
- /* Initialise General-Purpose I/O Modules on BF537 */
- /* Rev 0.0 Anomaly 05000212 - PORTx_FER,
- * PORT_MUX Registers Do Not accept "writes" correctly:
- */
- p0.h = hi(BFIN_PORT_MUX);
- p0.l = lo(BFIN_PORT_MUX);
-#if ANOMALY_05000212
- R0.L = W[P0]; /* Read */
- SSYNC;
-#endif
- R0 = (PGDE_UART | PFTE_UART)(Z);
-#if ANOMALY_05000212
- W[P0] = R0.L; /* Write */
- SSYNC;
-#endif
- W[P0] = R0.L; /* Enable both UARTS */
- SSYNC;
-
- p0.h = hi(PORTF_FER);
- p0.l = lo(PORTF_FER);
-#if ANOMALY_05000212
- R0.L = W[P0]; /* Read */
- SSYNC;
-#endif
- R0 = 0x000F(Z);
-#if ANOMALY_05000212
- W[P0] = R0.L; /* Write */
- SSYNC;
-#endif
- /* Enable peripheral function of PORTF for UART0 and UART1 */
- W[P0] = R0.L;
- SSYNC;
-
-#if !defined(CONFIG_BF534)
- p0.h = hi(EMAC_SYSTAT);
- p0.l = lo(EMAC_SYSTAT);
- R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */
- R0.l = 0xFFFF;
- [P0] = R0;
- SSYNC;
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/clocks.h>
+#include <mach/mem_init.h>
#endif
- /* Initialise UART - when booting from u-boot, the UART is not disabled
- * so if we dont initalize here, our serial console gets hosed */
- p0.h = hi(BFIN_UART_LCR);
- p0.l = lo(BFIN_UART_LCR);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable DLL writes */
- ssync;
-
- p0.h = hi(BFIN_UART_DLL);
- p0.l = lo(BFIN_UART_DLL);
- r0 = 0x0(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_DLH);
- p0.l = lo(BFIN_UART_DLH);
- r0 = 0x00(Z);
- w[p0] = r0.L;
- ssync;
-
- p0.h = hi(BFIN_UART_GCTL);
- p0.l = lo(BFIN_UART_GCTL);
- r0 = 0x0(Z);
- w[p0] = r0.L; /* To enable UART clock */
- ssync;
-
- /* Initialize stack pointer */
- sp.l = lo(INITIAL_STACK);
- sp.h = hi(INITIAL_STACK);
- fp = sp;
- usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
- SP += -12;
- call _init_early_exception_vectors;
- SP += 12;
-#endif
-
- /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
- call _bf53x_relocate_l1_mem;
-#if CONFIG_BFIN_KERNEL_CLOCK
- call _start_dma_code;
-#endif
-
- /* Code for initializing Async memory banks */
-
- p2.h = hi(EBIU_AMBCTL1);
- p2.l = lo(EBIU_AMBCTL1);
- r0.h = hi(AMBCTL1VAL);
- r0.l = lo(AMBCTL1VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMBCTL0);
- p2.l = lo(EBIU_AMBCTL0);
- r0.h = hi(AMBCTL0VAL);
- r0.l = lo(AMBCTL0VAL);
- [p2] = r0;
- ssync;
-
- p2.h = hi(EBIU_AMGCTL);
- p2.l = lo(EBIU_AMGCTL);
- r0 = AMGCTLVAL;
- w[p2] = r0;
- ssync;
-
- /* This section keeps the processor in supervisor mode
- * during kernel boot. Switches to user mode at end of boot.
- * See page 3-9 of Hardware Reference manual for documentation.
- */
-
- /* EVT15 = _real_start */
-
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _real_start;
- p1.h = _real_start;
- [p0] = p1;
- csync;
-
- p0.l = lo(IMASK);
- p0.h = hi(IMASK);
- p1.l = IMASK_IVG15;
- p1.h = 0x0;
- [p0] = p1;
- csync;
-
- raise 15;
- p0.l = .LWAIT_HERE;
- p0.h = .LWAIT_HERE;
- reti = p0;
-#if ANOMALY_05000281
- nop; nop; nop;
-#endif
- rti;
-
-.LWAIT_HERE:
- jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
- [ -- sp ] = reti;
- p0.l = lo(WDOG_CTL);
- p0.h = hi(WDOG_CTL);
- r0 = 0xAD6(z);
- w[p0] = r0; /* watchdog off for now */
- ssync;
-
- /* Code update for BSS size == 0
- * Zero out the bss region.
- */
-
- p1.l = ___bss_start;
- p1.h = ___bss_start;
- p2.l = ___bss_stop;
- p2.h = ___bss_stop;
- r0 = 0;
- p2 -= p1;
- lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
- B[p1++] = r0;
-
- /* In case there is a NULL pointer reference
- * Zero out region before stext
- */
-
- p1.l = 0x0;
- p1.h = 0x0;
- r0.l = __stext;
- r0.h = __stext;
- r0 = r0 >> 1;
- p2 = r0;
- r0 = 0;
- lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
- W[p1++] = r0;
-
- /* pass the uboot arguments to the global value command line */
- R0 = R7;
- call _cmdline_init;
-
- p1.l = __rambase;
- p1.h = __rambase;
- r0.l = __sdata;
- r0.h = __sdata;
- [p1] = r0;
-
- p1.l = __ramstart;
- p1.h = __ramstart;
- p3.l = ___bss_stop;
- p3.h = ___bss_stop;
-
- r1 = p3;
- [p1] = r1;
-
- /*
- * load the current thread pointer and stack
- */
- r1.l = _init_thread_union;
- r1.h = _init_thread_union;
-
- r2.l = 0x2000;
- r2.h = 0x0000;
- r1 = r1 + r2;
- sp = r1;
- usp = sp;
- fp = sp;
- jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
.section .l1.text
-#if CONFIG_BFIN_KERNEL_CLOCK
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
ENTRY(_start_dma_code)
/* Enable PHY CLK buffer output */
@@ -401,6 +87,9 @@ ENTRY(_start_dma_code)
r1 = PLL_BYPASS; /* Bypass the PLL? */
r1 = r1 << 8; /* Shift it over */
r0 = r1 | r0; /* add them all together */
+#ifdef ANOMALY_05000265
+ BITSET(r0, 15); /* Add 250 mV of hysteresis to SPORT input pins */
+#endif
p0.h = hi(PLL_CTL);
p0.l = lo(PLL_CTL); /* Load the address */
@@ -430,12 +119,6 @@ ENTRY(_start_dma_code)
w[p0] = r0.l;
ssync;
- p0.l = LO(EBIU_SDBCTL);
- p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */
- r0 = mem_SDBCTL;
- w[p0] = r0.l;
- ssync;
-
P2.H = hi(EBIU_SDGCTL);
P2.L = lo(EBIU_SDGCTL);
R0 = [P2];
@@ -458,13 +141,6 @@ ENTRY(_start_dma_code)
[P2] = R1;
SSYNC;
- p0.h = hi(SIC_IWR);
- p0.l = lo(SIC_IWR);
- r0.l = lo(IWR_ENABLE_ALL);
- r0.h = hi(IWR_ENABLE_ALL);
- [p0] = r0;
- SSYNC;
-
RTS;
ENDPROC(_start_dma_code)
#endif /* CONFIG_BFIN_KERNEL_CLOCK */
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 03:55:02 +0300