diff options
Diffstat (limited to 'arch/blackfin/mach-bf527/Kconfig')
| -rw-r--r-- | arch/blackfin/mach-bf527/Kconfig | 325 |
1 files changed, 0 insertions, 325 deletions
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig deleted file mode 100644 index 6df20f9c7bd4..000000000000 --- a/arch/blackfin/mach-bf527/Kconfig +++ /dev/null @@ -1,325 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -config BF52x - def_bool y - depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527) - -if (BF52x) - -source "arch/blackfin/mach-bf527/boards/Kconfig" - -menu "BF527 Specific Configuration" - -comment "Alternative Multiplexing Scheme" - -choice - prompt "SPORT0" - default BF527_SPORT0_PORTG - help - Select PORT used for SPORT0. See Hardware Reference Manual - -config BF527_SPORT0_PORTF - bool "PORT F" - help - PORT F - -config BF527_SPORT0_PORTG - bool "PORT G" - help - PORT G -endchoice - -choice - prompt "SPORT0 TSCLK Location" - depends on BF527_SPORT0_PORTG - default BF527_SPORT0_TSCLK_PG10 - help - Select PIN used for SPORT0_TSCLK. See Hardware Reference Manual - -config BF527_SPORT0_TSCLK_PG10 - bool "PORT PG10" - help - PORT PG10 - -config BF527_SPORT0_TSCLK_PG14 - bool "PORT PG14" - help - PORT PG14 -endchoice - -choice - prompt "UART1" - default BF527_UART1_PORTF - help - Select PORT used for UART1. See Hardware Reference Manual - -config BF527_UART1_PORTF - bool "PORT F" - help - PORT F - -config BF527_UART1_PORTG - bool "PORT G" - help - PORT G -endchoice - -choice - prompt "NAND (NFC) Data" - default BF527_NAND_D_PORTH - help - Select PORT used for NAND Data Bus. See Hardware Reference Manual - -config BF527_NAND_D_PORTF - bool "PORT F" - help - PORT F - -config BF527_NAND_D_PORTH - bool "PORT H" - help - PORT H -endchoice - -comment "Hysteresis/Schmitt Trigger Control" -config BFIN_HYSTERESIS_CONTROL - bool "Enable Hysteresis Control" - help - The ADSP-BF52x allows to control input hysteresis for Port F, - Port G and Port H and other processor signal inputs. - The Schmitt trigger enables can be set only for pin groups. - Saying Y will overwrite the default reset or boot loader - initialization. - -menu "PORT F" - depends on BFIN_HYSTERESIS_CONTROL -config GPIO_HYST_PORTF_0_7 - bool "Enable Hysteresis on PORTF {0...7}" -config GPIO_HYST_PORTF_8_9 - bool "Enable Hysteresis on PORTF {8, 9}" -config GPIO_HYST_PORTF_10 - bool "Enable Hysteresis on PORTF 10" -config GPIO_HYST_PORTF_11 - bool "Enable Hysteresis on PORTF 11" -config GPIO_HYST_PORTF_12_13 - bool "Enable Hysteresis on PORTF {12, 13}" -config GPIO_HYST_PORTF_14_15 - bool "Enable Hysteresis on PORTF {14, 15}" -endmenu - -menu "PORT G" - depends on BFIN_HYSTERESIS_CONTROL -config GPIO_HYST_PORTG_0 - bool "Enable Hysteresis on PORTG 0" -config GPIO_HYST_PORTG_1_4 - bool "Enable Hysteresis on PORTG {1...4}" -config GPIO_HYST_PORTG_5_6 - bool "Enable Hysteresis on PORTG {5, 6}" -config GPIO_HYST_PORTG_7_8 - bool "Enable Hysteresis on PORTG {7, 8}" -config GPIO_HYST_PORTG_9 - bool "Enable Hysteresis on PORTG 9" -config GPIO_HYST_PORTG_10 - bool "Enable Hysteresis on PORTG 10" -config GPIO_HYST_PORTG_11_13 - bool "Enable Hysteresis on PORTG {11...13}" -config GPIO_HYST_PORTG_14_15 - bool "Enable Hysteresis on PORTG {14, 15}" -endmenu - -menu "PORT H" - depends on BFIN_HYSTERESIS_CONTROL -config GPIO_HYST_PORTH_0_7 - bool "Enable Hysteresis on PORTH {0...7}" -config GPIO_HYST_PORTH_8 - bool "Enable Hysteresis on PORTH 8" -config GPIO_HYST_PORTH_9_15 - bool "Enable Hysteresis on PORTH {9...15}" -endmenu - -menu "None-GPIO" - depends on BFIN_HYSTERESIS_CONTROL -config NONEGPIO_HYST_TMR0_FS1_PPICLK - bool "Enable Hysteresis on {TMR0, PPI_FS1, PPI_CLK}" -config NONEGPIO_HYST_NMI_RST_BMODE - bool "Enable Hysteresis on {NMI, RESET, BMODE}" -config NONEGPIO_HYST_JTAG - bool "Enable Hysteresis on JTAG" -endmenu - -comment "Interrupt Priority Assignment" -menu "Priority" - -config IRQ_PLL_WAKEUP - int "IRQ_PLL_WAKEUP" - default 7 -config IRQ_DMA0_ERROR - int "IRQ_DMA0_ERROR" - default 7 -config IRQ_DMAR0_BLK - int "IRQ_DMAR0_BLK" - default 7 -config IRQ_DMAR1_BLK - int "IRQ_DMAR1_BLK" - default 7 -config IRQ_DMAR0_OVR - int "IRQ_DMAR0_OVR" - default 7 -config IRQ_DMAR1_OVR - int "IRQ_DMAR1_OVR" - default 7 -config IRQ_PPI_ERROR - int "IRQ_PPI_ERROR" - default 7 -config IRQ_MAC_ERROR - int "IRQ_MAC_ERROR" - default 7 -config IRQ_SPORT0_ERROR - int "IRQ_SPORT0_ERROR" - default 7 -config IRQ_SPORT1_ERROR - int "IRQ_SPORT1_ERROR" - default 7 -config IRQ_UART0_ERROR - int "IRQ_UART0_ERROR" - default 7 -config IRQ_UART1_ERROR - int "IRQ_UART1_ERROR" - default 7 -config IRQ_RTC - int "IRQ_RTC" - default 8 -config IRQ_PPI - int "IRQ_PPI" - default 8 -config IRQ_SPORT0_RX - int "IRQ_SPORT0_RX" - default 9 -config IRQ_SPORT0_TX - int "IRQ_SPORT0_TX" - default 9 -config IRQ_SPORT1_RX - int "IRQ_SPORT1_RX" - default 9 -config IRQ_SPORT1_TX - int "IRQ_SPORT1_TX" - default 9 -config IRQ_TWI - int "IRQ_TWI" - default 10 -config IRQ_SPI - int "IRQ_SPI" - default 10 -config IRQ_UART0_RX - int "IRQ_UART0_RX" - default 10 -config IRQ_UART0_TX - int "IRQ_UART0_TX" - default 10 -config IRQ_UART1_RX - int "IRQ_UART1_RX" - default 10 -config IRQ_UART1_TX - int "IRQ_UART1_TX" - default 10 -config IRQ_OPTSEC - int "IRQ_OPTSEC" - default 11 -config IRQ_CNT - int "IRQ_CNT" - default 11 -config IRQ_MAC_RX - int "IRQ_MAC_RX" - default 11 -config IRQ_PORTH_INTA - int "IRQ_PORTH_INTA" - default 11 -config IRQ_MAC_TX - int "IRQ_MAC_TX/NFC" - default 11 -config IRQ_PORTH_INTB - int "IRQ_PORTH_INTB" - default 11 -config IRQ_TIMER0 - int "IRQ_TIMER0" - default 7 if TICKSOURCE_GPTMR0 - default 8 -config IRQ_TIMER1 - int "IRQ_TIMER1" - default 12 -config IRQ_TIMER2 - int "IRQ_TIMER2" - default 12 -config IRQ_TIMER3 - int "IRQ_TIMER3" - default 12 -config IRQ_TIMER4 - int "IRQ_TIMER4" - default 12 -config IRQ_TIMER5 - int "IRQ_TIMER5" - default 12 -config IRQ_TIMER6 - int "IRQ_TIMER6" - default 12 -config IRQ_TIMER7 - int "IRQ_TIMER7" - default 12 -config IRQ_PORTG_INTA - int "IRQ_PORTG_INTA" - default 12 -config IRQ_PORTG_INTB - int "IRQ_PORTG_INTB" - default 12 -config IRQ_MEM_DMA0 - int "IRQ_MEM_DMA0" - default 13 -config IRQ_MEM_DMA1 - int "IRQ_MEM_DMA1" - default 13 -config IRQ_WATCH - int "IRQ_WATCH" - default 13 -config IRQ_PORTF_INTA - int "IRQ_PORTF_INTA" - default 13 -config IRQ_PORTF_INTB - int "IRQ_PORTF_INTB" - default 13 -config IRQ_SPI_ERROR - int "IRQ_SPI_ERROR" - default 7 -config IRQ_NFC_ERROR - int "IRQ_NFC_ERROR" - default 7 -config IRQ_HDMA_ERROR - int "IRQ_HDMA_ERROR" - default 7 -config IRQ_HDMA - int "IRQ_HDMA" - default 7 -config IRQ_USB_EINT - int "IRQ_USB_EINT" - default 10 -config IRQ_USB_INT0 - int "IRQ_USB_INT0" - default 10 -config IRQ_USB_INT1 - int "IRQ_USB_INT1" - default 10 -config IRQ_USB_INT2 - int "IRQ_USB_INT2" - default 10 -config IRQ_USB_DMA - int "IRQ_USB_DMA" - default 10 - - help - Enter the priority numbers between 7-13 ONLY. Others are Reserved. - This applies to all the above. It is not recommended to assign the - highest priority number 7 to UART or any other device. - -endmenu - -endmenu - -endif |