diff options
Diffstat (limited to 'arch/blackfin/include/asm')
27 files changed, 2057 insertions, 66 deletions
diff --git a/arch/blackfin/include/asm/bfin-global.h b/arch/blackfin/include/asm/bfin-global.h index 17bcbf60bcae..608be5e6d25c 100644 --- a/arch/blackfin/include/asm/bfin-global.h +++ b/arch/blackfin/include/asm/bfin-global.h @@ -35,6 +35,11 @@ extern void bfin_setup_cpudata(unsigned int cpu); extern unsigned long get_cclk(void); extern unsigned long get_sclk(void); +#ifdef CONFIG_BF60x +extern unsigned long get_sclk0(void); +extern unsigned long get_sclk1(void); +extern unsigned long get_dclk(void); +#endif extern unsigned long sclk_to_usecs(unsigned long sclk); extern unsigned long usecs_to_sclk(unsigned long usecs); diff --git a/arch/blackfin/include/asm/bfin6xx_spi.h b/arch/blackfin/include/asm/bfin6xx_spi.h new file mode 100644 index 000000000000..89370b653dcd --- /dev/null +++ b/arch/blackfin/include/asm/bfin6xx_spi.h @@ -0,0 +1,258 @@ +/* + * Analog Devices SPI3 controller driver + * + * Copyright (c) 2011 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _SPI_CHANNEL_H_ +#define _SPI_CHANNEL_H_ + +#include <linux/types.h> + +/* SPI_CONTROL */ +#define SPI_CTL_EN 0x00000001 /* Enable */ +#define SPI_CTL_MSTR 0x00000002 /* Master/Slave */ +#define SPI_CTL_PSSE 0x00000004 /* controls modf error in master mode */ +#define SPI_CTL_ODM 0x00000008 /* Open Drain Mode */ +#define SPI_CTL_CPHA 0x00000010 /* Clock Phase */ +#define SPI_CTL_CPOL 0x00000020 /* Clock Polarity */ +#define SPI_CTL_ASSEL 0x00000040 /* Slave Select Pin Control */ +#define SPI_CTL_SELST 0x00000080 /* Slave Select Polarity in-between transfers */ +#define SPI_CTL_EMISO 0x00000100 /* Enable MISO */ +#define SPI_CTL_SIZE 0x00000600 /* Word Transfer Size */ +#define SPI_CTL_SIZE08 0x00000000 /* SIZE: 8 bits */ +#define SPI_CTL_SIZE16 0x00000200 /* SIZE: 16 bits */ +#define SPI_CTL_SIZE32 0x00000400 /* SIZE: 32 bits */ +#define SPI_CTL_LSBF 0x00001000 /* LSB First */ +#define SPI_CTL_FCEN 0x00002000 /* Flow-Control Enable */ +#define SPI_CTL_FCCH 0x00004000 /* Flow-Control Channel Selection */ +#define SPI_CTL_FCPL 0x00008000 /* Flow-Control Polarity */ +#define SPI_CTL_FCWM 0x00030000 /* Flow-Control Water-Mark */ +#define SPI_CTL_FIFO0 0x00000000 /* FCWM: TFIFO empty or RFIFO Full */ +#define SPI_CTL_FIFO1 0x00010000 /* FCWM: TFIFO 75% or more empty or RFIFO 75% or more full */ +#define SPI_CTL_FIFO2 0x00020000 /* FCWM: TFIFO 50% or more empty or RFIFO 50% or more full */ +#define SPI_CTL_FMODE 0x00040000 /* Fast-mode Enable */ +#define SPI_CTL_MIOM 0x00300000 /* Multiple I/O Mode */ +#define SPI_CTL_MIO_DIS 0x00000000 /* MIOM: Disable */ +#define SPI_CTL_MIO_DUAL 0x00100000 /* MIOM: Enable DIOM (Dual I/O Mode) */ +#define SPI_CTL_MIO_QUAD 0x00200000 /* MIOM: Enable QUAD (Quad SPI Mode) */ +#define SPI_CTL_SOSI 0x00400000 /* Start on MOSI */ +/* SPI_RX_CONTROL */ +#define SPI_RXCTL_REN 0x00000001 /* Receive Channel Enable */ +#define SPI_RXCTL_RTI 0x00000004 /* Receive Transfer Initiate */ +#define SPI_RXCTL_RWCEN 0x00000008 /* Receive Word Counter Enable */ +#define SPI_RXCTL_RDR 0x00000070 /* Receive Data Request */ +#define SPI_RXCTL_RDR_DIS 0x00000000 /* RDR: Disabled */ +#define SPI_RXCTL_RDR_NE 0x00000010 /* RDR: RFIFO not empty */ +#define SPI_RXCTL_RDR_25 0x00000020 /* RDR: RFIFO 25% full */ +#define SPI_RXCTL_RDR_50 0x00000030 /* RDR: RFIFO 50% full */ +#define SPI_RXCTL_RDR_75 0x00000040 /* RDR: RFIFO 75% full */ +#define SPI_RXCTL_RDR_FULL 0x00000050 /* RDR: RFIFO full */ +#define SPI_RXCTL_RDO 0x00000100 /* Receive Data Over-Run */ +#define SPI_RXCTL_RRWM 0x00003000 /* FIFO Regular Water-Mark */ +#define SPI_RXCTL_RWM_0 0x00000000 /* RRWM: RFIFO Empty */ +#define SPI_RXCTL_RWM_25 0x00001000 /* RRWM: RFIFO 25% full */ +#define SPI_RXCTL_RWM_50 0x00002000 /* RRWM: RFIFO 50% full */ +#define SPI_RXCTL_RWM_75 0x00003000 /* RRWM: RFIFO 75% full */ +#define SPI_RXCTL_RUWM 0x00070000 /* FIFO Urgent Water-Mark */ +#define SPI_RXCTL_UWM_DIS 0x00000000 /* RUWM: Disabled */ +#define SPI_RXCTL_UWM_25 0x00010000 /* RUWM: RFIFO 25% full */ +#define SPI_RXCTL_UWM_50 0x00020000 /* RUWM: RFIFO 50% full */ +#define SPI_RXCTL_UWM_75 0x00030000 /* RUWM: RFIFO 75% full */ +#define SPI_RXCTL_UWM_FULL 0x00040000 /* RUWM: RFIFO full */ +/* SPI_TX_CONTROL */ +#define SPI_TXCTL_TEN 0x00000001 /* Transmit Channel Enable */ +#define SPI_TXCTL_TTI 0x00000004 /* Transmit Transfer Initiate */ +#define SPI_TXCTL_TWCEN 0x00000008 /* Transmit Word Counter Enable */ +#define SPI_TXCTL_TDR 0x00000070 /* Transmit Data Request */ +#define SPI_TXCTL_TDR_DIS 0x00000000 /* TDR: Disabled */ +#define SPI_TXCTL_TDR_NF 0x00000010 /* TDR: TFIFO not full */ +#define SPI_TXCTL_TDR_25 0x00000020 /* TDR: TFIFO 25% empty */ +#define SPI_TXCTL_TDR_50 0x00000030 /* TDR: TFIFO 50% empty */ +#define SPI_TXCTL_TDR_75 0x00000040 /* TDR: TFIFO 75% empty */ +#define SPI_TXCTL_TDR_EMPTY 0x00000050 /* TDR: TFIFO empty */ +#define SPI_TXCTL_TDU 0x00000100 /* Transmit Data Under-Run */ +#define SPI_TXCTL_TRWM 0x00003000 /* FIFO Regular Water-Mark */ +#define SPI_TXCTL_RWM_FULL 0x00000000 /* TRWM: TFIFO full */ +#define SPI_TXCTL_RWM_25 0x00001000 /* TRWM: TFIFO 25% empty */ +#define SPI_TXCTL_RWM_50 0x00002000 /* TRWM: TFIFO 50% empty */ +#define SPI_TXCTL_RWM_75 0x00003000 /* TRWM: TFIFO 75% empty */ +#define SPI_TXCTL_TUWM 0x00070000 /* FIFO Urgent Water-Mark */ +#define SPI_TXCTL_UWM_DIS 0x00000000 /* TUWM: Disabled */ +#define SPI_TXCTL_UWM_25 0x00010000 /* TUWM: TFIFO 25% empty */ +#define SPI_TXCTL_UWM_50 0x00020000 /* TUWM: TFIFO 50% empty */ +#define SPI_TXCTL_UWM_75 0x00030000 /* TUWM: TFIFO 75% empty */ +#define SPI_TXCTL_UWM_EMPTY 0x00040000 /* TUWM: TFIFO empty */ +/* SPI_CLOCK */ +#define SPI_CLK_BAUD 0x0000FFFF /* Baud Rate */ +/* SPI_DELAY */ +#define SPI_DLY_STOP 0x000000FF /* Transfer delay time in multiples of SCK period */ +#define SPI_DLY_LEADX 0x00000100 /* Extended (1 SCK) LEAD Control */ +#define SPI_DLY_LAGX 0x00000200 /* Extended (1 SCK) LAG control */ +/* SPI_SSEL */ +#define SPI_SLVSEL_SSE1 0x00000002 /* SPISSEL1 Enable */ +#define SPI_SLVSEL_SSE2 0x00000004 /* SPISSEL2 Enable */ +#define SPI_SLVSEL_SSE3 0x00000008 /* SPISSEL3 Enable */ +#define SPI_SLVSEL_SSE4 0x00000010 /* SPISSEL4 Enable */ +#define SPI_SLVSEL_SSE5 0x00000020 /* SPISSEL5 Enable */ +#define SPI_SLVSEL_SSE6 0x00000040 /* SPISSEL6 Enable */ +#define SPI_SLVSEL_SSE7 0x00000080 /* SPISSEL7 Enable */ +#define SPI_SLVSEL_SSEL1 0x00000200 /* SPISSEL1 Value */ +#define SPI_SLVSEL_SSEL2 0x00000400 /* SPISSEL2 Value */ +#define SPI_SLVSEL_SSEL3 0x00000800 /* SPISSEL3 Value */ +#define SPI_SLVSEL_SSEL4 0x00001000 /* SPISSEL4 Value */ +#define SPI_SLVSEL_SSEL5 0x00002000 /* SPISSEL5 Value */ +#define SPI_SLVSEL_SSEL6 0x00004000 /* SPISSEL6 Value */ +#define SPI_SLVSEL_SSEL7 0x00008000 /* SPISSEL7 Value */ +/* SPI_RWC */ +#define SPI_RWC_VALUE 0x0000FFFF /* Received Word-Count */ +/* SPI_RWCR */ +#define SPI_RWCR_VALUE 0x0000FFFF /* Received Word-Count Reload */ +/* SPI_TWC */ +#define SPI_TWC_VALUE 0x0000FFFF /* Transmitted Word-Count */ +/* SPI_TWCR */ +#define SPI_TWCR_VALUE 0x0000FFFF /* Transmitted Word-Count Reload */ +/* SPI_IMASK */ +#define SPI_IMSK_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_IMASKCL */ +#define SPI_IMSK_CLR_RUW 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_CLR_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_CLR_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_CLR_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_CLR_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_CLR_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_CLR_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_CLR_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_CLR_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_IMASKST */ +#define SPI_IMSK_SET_RUWM 0x00000002 /* Receive Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_TUWM 0x00000004 /* Transmit Urgent Water-Mark Interrupt Mask */ +#define SPI_IMSK_SET_ROM 0x00000010 /* Receive Over-Run Error Interrupt Mask */ +#define SPI_IMSK_SET_TUM 0x00000020 /* Transmit Under-Run Error Interrupt Mask */ +#define SPI_IMSK_SET_TCM 0x00000040 /* Transmit Collision Error Interrupt Mask */ +#define SPI_IMSK_SET_MFM 0x00000080 /* Mode Fault Error Interrupt Mask */ +#define SPI_IMSK_SET_RSM 0x00000100 /* Receive Start Interrupt Mask */ +#define SPI_IMSK_SET_TSM 0x00000200 /* Transmit Start Interrupt Mask */ +#define SPI_IMSK_SET_RFM 0x00000400 /* Receive Finish Interrupt Mask */ +#define SPI_IMSK_SET_TFM 0x00000800 /* Transmit Finish Interrupt Mask */ +/* SPI_STATUS */ +#define SPI_STAT_SPIF 0x00000001 /* SPI Finished */ +#define SPI_STAT_RUWM 0x00000002 /* Receive Urgent Water-Mark Breached */ +#define SPI_STAT_TUWM 0x00000004 /* Transmit Urgent Water-Mark Breached */ +#define SPI_STAT_ROE 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_STAT_TUE 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_STAT_TCE 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_STAT_MODF 0x00000080 /* Mode Fault Error Indication */ +#define SPI_STAT_RS 0x00000100 /* Receive Start Indication */ +#define SPI_STAT_TS 0x00000200 /* Transmit Start Indication */ +#define SPI_STAT_RF 0x00000400 /* Receive Finish Indication */ +#define SPI_STAT_TF 0x00000800 /* Transmit Finish Indication */ +#define SPI_STAT_RFS 0x00007000 /* SPI_RFIFO status */ +#define SPI_STAT_RFIFO_EMPTY 0x00000000 /* RFS: RFIFO Empty */ +#define SPI_STAT_RFIFO_25 0x00001000 /* RFS: RFIFO 25% Full */ +#define SPI_STAT_RFIFO_50 0x00002000 /* RFS: RFIFO 50% Full */ +#define SPI_STAT_RFIFO_75 0x00003000 /* RFS: RFIFO 75% Full */ +#define SPI_STAT_RFIFO_FULL 0x00004000 /* RFS: RFIFO Full */ +#define SPI_STAT_TFS 0x00070000 /* SPI_TFIFO status */ +#define SPI_STAT_TFIFO_FULL 0x00000000 /* TFS: TFIFO full */ +#define SPI_STAT_TFIFO_25 0x00010000 /* TFS: TFIFO 25% empty */ +#define SPI_STAT_TFIFO_50 0x00020000 /* TFS: TFIFO 50% empty */ +#define SPI_STAT_TFIFO_75 0x00030000 /* TFS: TFIFO 75% empty */ +#define SPI_STAT_TFIFO_EMPTY 0x00040000 /* TFS: TFIFO empty */ +#define SPI_STAT_FCS 0x00100000 /* Flow-Control Stall Indication */ +#define SPI_STAT_RFE 0x00400000 /* SPI_RFIFO Empty */ +#define SPI_STAT_TFF 0x00800000 /* SPI_TFIFO Full */ +/* SPI_ILAT */ +#define SPI_ILAT_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ +#define SPI_ILAT_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ +#define SPI_ILAT_ROI 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_ILAT_TUI 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_ILAT_TCI 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_ILAT_MFI 0x00000080 /* Mode Fault Error Indication */ +#define SPI_ILAT_RSI 0x00000100 /* Receive Start Indication */ +#define SPI_ILAT_TSI 0x00000200 /* Transmit Start Indication */ +#define SPI_ILAT_RFI 0x00000400 /* Receive Finish Indication */ +#define SPI_ILAT_TFI 0x00000800 /* Transmit Finish Indication */ +/* SPI_ILATCL */ +#define SPI_ILAT_CLR_RUWMI 0x00000002 /* Receive Urgent Water Mark Interrupt */ +#define SPI_ILAT_CLR_TUWMI 0x00000004 /* Transmit Urgent Water Mark Interrupt */ +#define SPI_ILAT_CLR_ROI 0x00000010 /* Receive Over-Run Error Indication */ +#define SPI_ILAT_CLR_TUI 0x00000020 /* Transmit Under-Run Error Indication */ +#define SPI_ILAT_CLR_TCI 0x00000040 /* Transmit Collision Error Indication */ +#define SPI_ILAT_CLR_MFI 0x00000080 /* Mode Fault Error Indication */ +#define SPI_ILAT_CLR_RSI 0x00000100 /* Receive Start Indication */ +#define SPI_ILAT_CLR_TSI 0x00000200 /* Transmit Start Indication */ +#define SPI_ILAT_CLR_RFI 0x00000400 /* Receive Finish Indication */ +#define SPI_ILAT_CLR_TFI 0x00000800 /* Transmit Finish Indication */ + +/* + * bfin spi3 registers layout + */ +struct bfin_spi_regs { + u32 revid; + u32 control; + u32 rx_control; + u32 tx_control; + u32 clock; + u32 delay; + u32 ssel; + u32 rwc; + u32 rwcr; + u32 twc; + u32 twcr; + u32 reserved0; + u32 emask; + u32 emaskcl; + u32 emaskst; + u32 reserved1; + u32 status; + u32 elat; + u32 elatcl; + u32 reserved2; + u32 rfifo; + u32 reserved3; + u32 tfifo; +}; + +#define MAX_CTRL_CS 8 /* cs in spi controller */ + +/* device.platform_data for SSP controller devices */ +struct bfin6xx_spi_master { + u16 num_chipselect; + u16 pin_req[7]; +}; + +/* spi_board_info.controller_data for SPI slave devices, + * copied to spi_device.platform_data ... mostly for dma tuning + */ +struct bfin6xx_spi_chip { + u32 control; + u16 cs_chg_udelay; /* Some devices require 16-bit delays */ + u32 tx_dummy_val; /* tx value for rx only transfer */ + bool enable_dma; +}; + +#endif /* _SPI_CHANNEL_H_ */ diff --git a/arch/blackfin/include/asm/bfin_crc.h b/arch/blackfin/include/asm/bfin_crc.h new file mode 100644 index 000000000000..3deb4452ceed --- /dev/null +++ b/arch/blackfin/include/asm/bfin_crc.h @@ -0,0 +1,139 @@ +/* + * bfin_crc.h - interface to Blackfin CRC controllers + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __BFIN_CRC_H__ +#define __BFIN_CRC_H__ + +/* Function driver which use hardware crc must initialize the structure */ +struct crc_info { + /* Input data address */ + unsigned char *in_addr; + /* Output data address */ + unsigned char *out_addr; + /* Input or output bytes */ + unsigned long datasize; + union { + /* CRC to compare with that of input buffer */ + unsigned long crc_compare; + /* Value to compare with input data */ + unsigned long val_verify; + /* Value to fill */ + unsigned long val_fill; + }; + /* Value to program the 32b CRC Polynomial */ + unsigned long crc_poly; + union { + /* CRC calculated from the input data */ + unsigned long crc_result; + /* First failed position to verify input data */ + unsigned long pos_verify; + }; + /* CRC mirror flags */ + unsigned int bitmirr:1; + unsigned int bytmirr:1; + unsigned int w16swp:1; + unsigned int fdsel:1; + unsigned int rsltmirr:1; + unsigned int polymirr:1; + unsigned int cmpmirr:1; +}; + +/* Userspace interface */ +#define CRC_IOC_MAGIC 'C' +#define CRC_IOC_CALC_CRC _IOWR('C', 0x01, unsigned int) +#define CRC_IOC_MEMCPY_CRC _IOWR('C', 0x02, unsigned int) +#define CRC_IOC_VERIFY_VAL _IOWR('C', 0x03, unsigned int) +#define CRC_IOC_FILL_VAL _IOWR('C', 0x04, unsigned int) + + +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/miscdevice.h> + +struct crc_register { + u32 control; + u32 datacnt; + u32 datacntrld; + u32 __pad_1[2]; + u32 compare; + u32 fillval; + u32 datafifo; + u32 intren; + u32 intrenset; + u32 intrenclr; + u32 poly; + u32 __pad_2[4]; + u32 status; + u32 datacntcap; + u32 __pad_3; + u32 result; + u32 curresult; + u32 __pad_4[3]; + u32 revid; +}; + +struct bfin_crc { + struct miscdevice mdev; + struct list_head list; + int irq; + int dma_ch_src; + int dma_ch_dest; + volatile struct crc_register *regs; + struct crc_info *info; + struct mutex mutex; + struct completion c; + unsigned short opmode; + char name[20]; +}; + +/* CRC_STATUS Masks */ +#define CMPERR 0x00000002 /* Compare error */ +#define DCNTEXP 0x00000010 /* datacnt register expired */ +#define IBR 0x00010000 /* Input buffer ready */ +#define OBR 0x00020000 /* Output buffer ready */ +#define IRR 0x00040000 /* Immediate result readt */ +#define LUTDONE 0x00080000 /* Look-up table generation done */ +#define FSTAT 0x00700000 /* FIFO status */ +#define MAX_FIFO 4 /* Max fifo size */ + +/* CRC_CONTROL Masks */ +#define BLKEN 0x00000001 /* Block enable */ +#define OPMODE 0x000000F0 /* Operation mode */ +#define OPMODE_OFFSET 4 /* Operation mode mask offset*/ +#define MODE_DMACPY_CRC 1 /* MTM CRC compute and compare */ +#define MODE_DATA_FILL 2 /* MTM data fill */ +#define MODE_CALC_CRC 3 /* MSM CRC compute and compare */ +#define MODE_DATA_VERIFY 4 /* MSM data verify */ +#define AUTOCLRZ 0x00000100 /* Auto clear to zero */ +#define AUTOCLRF 0x00000200 /* Auto clear to one */ +#define OBRSTALL 0x00001000 /* Stall on output buffer ready */ +#define IRRSTALL 0x00002000 /* Stall on immediate result ready */ +#define BITMIRR 0x00010000 /* Mirror bits within each byte of 32-bit input data */ +#define BITMIRR_OFFSET 16 /* Mirror bits offset */ +#define BYTMIRR 0x00020000 /* Mirror bytes of 32-bit input data */ +#define BYTMIRR_OFFSET 17 /* Mirror bytes offset */ +#define W16SWP 0x00040000 /* Mirror uppper and lower 16-bit word of 32-bit input data */ +#define W16SWP_OFFSET 18 /* Mirror 16-bit word offset */ +#define FDSEL 0x00080000 /* FIFO is written after input data is mirrored */ +#define FDSEL_OFFSET 19 /* Mirror FIFO offset */ +#define RSLTMIRR 0x00100000 /* CRC result registers are mirrored. */ +#define RSLTMIRR_OFFSET 20 /* Mirror CRC result offset. */ +#define POLYMIRR 0x00200000 /* CRC poly register is mirrored. */ +#define POLYMIRR_OFFSET 21 /* Mirror CRC poly offset. */ +#define CMPMIRR 0x00400000 /* CRC compare register is mirrored. */ +#define CMPMIRR_OFFSET 22 /* Mirror CRC compare offset. */ + +/* CRC_INTREN Masks */ +#define CMPERRI 0x02 /* CRC_ERROR_INTR */ +#define DCNTEXPI 0x10 /* CRC_STATUS_INTR */ + +#endif + +#endif diff --git a/arch/blackfin/include/asm/bfin_dma.h b/arch/blackfin/include/asm/bfin_dma.h index d51120744148..6319f4e49083 100644 --- a/arch/blackfin/include/asm/bfin_dma.h +++ b/arch/blackfin/include/asm/bfin_dma.h @@ -15,12 +15,55 @@ #define DMAEN 0x0001 /* DMA Channel Enable */ #define WNR 0x0002 /* Channel Direction (W/R*) */ #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ +#define PSIZE_8 0x00000000 /* Transfer Word Size = 16 */ + +#ifdef CONFIG_BF60x + +#define PSIZE_16 0x00000010 /* Transfer Word Size = 16 */ +#define PSIZE_32 0x00000020 /* Transfer Word Size = 32 */ +#define PSIZE_64 0x00000030 /* Transfer Word Size = 32 */ +#define WDSIZE_16 0x00000100 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x00000200 /* Transfer Word Size = 32 */ +#define WDSIZE_64 0x00000300 /* Transfer Word Size = 32 */ +#define WDSIZE_128 0x00000400 /* Transfer Word Size = 32 */ +#define WDSIZE_256 0x00000500 /* Transfer Word Size = 32 */ +#define DMA2D 0x04000000 /* DMA Mode (2D/1D*) */ +#define RESTART 0x00000004 /* DMA Buffer Clear SYNC */ +#define DI_EN_X 0x00100000 /* Data Interrupt Enable in X count */ +#define DI_EN_Y 0x00200000 /* Data Interrupt Enable in Y count */ +#define DI_EN_P 0x00300000 /* Data Interrupt Enable in Peripheral */ +#define DI_EN DI_EN_X /* Data Interrupt Enable */ +#define NDSIZE_0 0x00000000 /* Next Descriptor Size = 1 */ +#define NDSIZE_1 0x00010000 /* Next Descriptor Size = 2 */ +#define NDSIZE_2 0x00020000 /* Next Descriptor Size = 3 */ +#define NDSIZE_3 0x00030000 /* Next Descriptor Size = 4 */ +#define NDSIZE_4 0x00040000 /* Next Descriptor Size = 5 */ +#define NDSIZE_5 0x00050000 /* Next Descriptor Size = 6 */ +#define NDSIZE_6 0x00060000 /* Next Descriptor Size = 7 */ +#define NDSIZE 0x00070000 /* Next Descriptor Size */ +#define NDSIZE_OFFSET 16 /* Next Descriptor Size Offset */ +#define DMAFLOW_LIST 0x00004000 /* Descriptor List Mode */ +#define DMAFLOW_LARGE DMAFLOW_LIST +#define DMAFLOW_ARRAY 0x00005000 /* Descriptor Array Mode */ +#define DMAFLOW_LIST_DEMAND 0x00006000 /* Descriptor Demand List Mode */ +#define DMAFLOW_ARRAY_DEMAND 0x00007000 /* Descriptor Demand Array Mode */ +#define DMA_RUN_DFETCH 0x00000100 /* DMA Channel Running Indicator (DFETCH) */ +#define DMA_RUN 0x00000200 /* DMA Channel Running Indicator */ +#define DMA_RUN_WAIT_TRIG 0x00000300 /* DMA Channel Running Indicator (WAIT TRIG) */ +#define DMA_RUN_WAIT_ACK 0x00000400 /* DMA Channel Running Indicator (WAIT ACK) */ + +#else + +#define PSIZE_16 0x0000 /* Transfer Word Size = 16 */ +#define PSIZE_32 0x0000 /* Transfer Word Size = 32 */ #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ #define RESTART 0x0020 /* DMA Buffer Clear */ #define DI_SEL 0x0040 /* Data Interrupt Timing Select */ #define DI_EN 0x0080 /* Data Interrupt Enable */ +#define DI_EN_X 0x00C0 /* Data Interrupt Enable in X count*/ +#define DI_EN_Y 0x0080 /* Data Interrupt Enable in Y count*/ #define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ @@ -32,18 +75,26 @@ #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ #define NDSIZE 0x0f00 /* Next Descriptor Size */ -#define DMAFLOW 0x7000 /* Flow Control */ -#define DMAFLOW_STOP 0x0000 /* Stop Mode */ -#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ +#define NDSIZE_OFFSET 8 /* Next Descriptor Size Offset */ #define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */ #define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ #define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ +#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ +#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ + +#endif +#define DMAFLOW 0x7000 /* Flow Control */ +#define DMAFLOW_STOP 0x0000 /* Stop Mode */ +#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */ /* DMA_IRQ_STATUS Masks */ #define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */ #define DMA_ERR 0x0002 /* DMA Error Interrupt Status */ -#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ -#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ +#ifdef CONFIG_BF60x +#define DMA_PIRQ 0x0004 /* DMA Peripheral Error Interrupt Status */ +#else +#define DMA_PIRQ 0 +#endif /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -57,6 +108,26 @@ struct bfin_dma_regs { u32 next_desc_ptr; u32 start_addr; +#ifdef CONFIG_BF60x + u32 cfg; + u32 x_count; + u32 x_modify; + u32 y_count; + u32 y_modify; + u32 pad1; + u32 pad2; + u32 curr_desc_ptr; + u32 prev_desc_ptr; + u32 curr_addr; + u32 irq_status; + u32 curr_x_count; + u32 curr_y_count; + u32 pad3; + u32 bw_limit_count; + u32 curr_bw_limit_count; + u32 bw_monitor_count; + u32 curr_bw_monitor_count; +#else __BFP(config); u32 __pad0; __BFP(x_count); @@ -71,8 +142,10 @@ struct bfin_dma_regs { u32 __pad1; __BFP(curr_y_count); u32 __pad2; +#endif }; +#ifndef CONFIG_BF60x /* * bfin handshake mdma registers layout */ @@ -85,6 +158,7 @@ struct bfin_hmdma_regs { __BFP(ecount); __BFP(bcount); }; +#endif #undef __BFP diff --git a/arch/blackfin/include/asm/bfin_pfmon.h b/arch/blackfin/include/asm/bfin_pfmon.h index accd47e2db40..bf52e1f32257 100644 --- a/arch/blackfin/include/asm/bfin_pfmon.h +++ b/arch/blackfin/include/asm/bfin_pfmon.h @@ -3,7 +3,7 @@ * * Copyright 2005-2011 Analog Devices Inc. * - * Licensed under the ADI BSD license or GPL-2 (or later). + * Licensed under the Clear BSD license or GPL-2 (or later). */ #ifndef __ASM_BFIN_PFMON_H__ diff --git a/arch/blackfin/include/asm/bfin_ppi.h b/arch/blackfin/include/asm/bfin_ppi.h index 3be05faa2c65..a4e872e16e75 100644 --- a/arch/blackfin/include/asm/bfin_ppi.h +++ b/arch/blackfin/include/asm/bfin_ppi.h @@ -10,6 +10,7 @@ #define __ASM_BFIN_PPI_H__ #include <linux/types.h> +#include <asm/blackfin.h> /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -48,6 +49,133 @@ struct bfin_eppi_regs { u32 clip; }; +/* + * bfin eppi3 registers layout + */ +struct bfin_eppi3_regs { + u32 stat; + u32 hcnt; + u32 hdly; + u32 vcnt; + u32 vdly; + u32 frame; + u32 line; + u32 clkdiv; + u32 ctl; + u32 fs1_wlhb; + u32 fs1_paspl; + u32 fs2_wlvb; + u32 fs2_palpf; + u32 imsk; + u32 oddclip; + u32 evenclip; + u32 fs1_dly; + u32 fs2_dly; + u32 ctl2; +}; + #undef __BFP +#ifdef EPPI0_CTL2 +#define EPPI_STAT_CFIFOERR 0x00000001 /* Chroma FIFO Error */ +#define EPPI_STAT_YFIFOERR 0x00000002 /* Luma FIFO Error */ +#define EPPI_STAT_LTERROVR 0x00000004 /* Line Track Overflow */ +#define EPPI_STAT_LTERRUNDR 0x00000008 /* Line Track Underflow */ +#define EPPI_STAT_FTERROVR 0x00000010 /* Frame Track Overflow */ +#define EPPI_STAT_FTERRUNDR 0x00000020 /* Frame Track Underflow */ +#define EPPI_STAT_ERRNCOR 0x00000040 /* Preamble Error Not Corrected */ +#define EPPI_STAT_PXPERR 0x00000080 /* PxP Ready Error */ +#define EPPI_STAT_ERRDET 0x00004000 /* Preamble Error Detected */ +#define EPPI_STAT_FLD 0x00008000 /* Current Field Received by EPPI */ + +#define EPPI_HCNT_VALUE 0x0000FFFF /* Holds the number of samples to read in or write out per line, after PPIx_HDLY number of cycles have expired since the last assertion of PPIx_FS1 */ + +#define EPPI_HDLY_VALUE 0x0000FFFF /* Number of PPIx_CLK cycles to delay after assertion of PPIx_FS1 before starting to read or write data */ + +#define EPPI_VCNT_VALUE 0x0000FFFF /* Holds the number of lines to read in or write out, after PPIx_VDLY number of lines from the start of frame */ + +#define EPPI_VDLY_VALUE 0x0000FFFF /* Number of lines to wait after the start of a new frame before starting to read/transmit data */ + +#define EPPI_FRAME_VALUE 0x0000FFFF /* Holds the number of lines expected per frame of data */ + +#define EPPI_LINE_VALUE 0x0000FFFF /* Holds the number of samples expected per line */ + +#define EPPI_CLKDIV_VALUE 0x0000FFFF /* Internal clock divider */ + +#define EPPI_CTL_EN 0x00000001 /* PPI Enable */ +#define EPPI_CTL_DIR 0x00000002 /* PPI Direction */ +#define EPPI_CTL_XFRTYPE 0x0000000C /* PPI Operating Mode */ +#define EPPI_CTL_ACTIVE656 0x00000000 /* XFRTYPE: ITU656 Active Video Only Mode */ +#define EPPI_CTL_ENTIRE656 0x00000004 /* XFRTYPE: ITU656 Entire Field Mode */ +#define EPPI_CTL_VERT656 0x00000008 /* XFRTYPE: ITU656 Vertical Blanking Only Mode */ +#define EPPI_CTL_NON656 0x0000000C /* XFRTYPE: Non-ITU656 Mode (GP Mode) */ +#define EPPI_CTL_FSCFG 0x00000030 /* Frame Sync Configuration */ +#define EPPI_CTL_SYNC0 0x00000000 /* FSCFG: Sync Mode 0 */ +#define EPPI_CTL_SYNC1 0x00000010 /* FSCFG: Sync Mode 1 */ +#define EPPI_CTL_SYNC2 0x00000020 /* FSCFG: Sync Mode 2 */ +#define EPPI_CTL_SYNC3 0x00000030 /* FSCFG: Sync Mode 3 */ +#define EPPI_CTL_FLDSEL 0x00000040 /* Field Select/Trigger */ +#define EPPI_CTL_ITUTYPE 0x00000080 /* ITU Interlace or Progressive */ +#define EPPI_CTL_BLANKGEN 0x00000100 /* ITU Output Mode with Internal Blanking Generation */ +#define EPPI_CTL_ICLKGEN 0x00000200 /* Internal Clock Generation */ +#define EPPI_CTL_IFSGEN 0x00000400 /* Internal Frame Sync Generation */ +#define EPPI_CTL_SIGNEXT 0x00000800 /* Sign Extension */ +#define EPPI_CTL_POLC 0x00003000 /* Frame Sync and Data Driving and Sampling Edges */ +#define EPPI_CTL_POLC0 0x00000000 /* POLC: Clock/Sync polarity mode 0 */ +#define EPPI_CTL_POLC1 0x00001000 /* POLC: Clock/Sync polarity mode 1 */ +#define EPPI_CTL_POLC2 0x00002000 /* POLC: Clock/Sync polarity mode 2 */ +#define EPPI_CTL_POLC3 0x00003000 /* POLC: Clock/Sync polarity mode 3 */ +#define EPPI_CTL_POLS 0x0000C000 /* Frame Sync Polarity */ +#define EPPI_CTL_FS1HI_FS2HI 0x00000000 /* POLS: FS1 and FS2 are active high */ +#define EPPI_CTL_FS1LO_FS2HI 0x00004000 /* POLS: FS1 is active low. FS2 is active high */ +#define EPPI_CTL_FS1HI_FS2LO 0x00008000 /* POLS: FS1 is active high. FS2 is active low */ +#define EPPI_CTL_FS1LO_FS2LO 0x0000C000 /* POLS: FS1 and FS2 are active low */ +#define EPPI_CTL_DLEN 0x00070000 /* Data Length */ +#define EPPI_CTL_DLEN08 0x00000000 /* DLEN: 8 bits */ +#define EPPI_CTL_DLEN10 0x00010000 /* DLEN: 10 bits */ +#define EPPI_CTL_DLEN12 0x00020000 /* DLEN: 12 bits */ +#define EPPI_CTL_DLEN14 0x00030000 /* DLEN: 14 bits */ +#define EPPI_CTL_DLEN16 0x00040000 /* DLEN: 16 bits */ +#define EPPI_CTL_DLEN18 0x00050000 /* DLEN: 18 bits */ +#define EPPI_CTL_DLEN20 0x00060000 /* DLEN: 20 bits */ +#define EPPI_CTL_DLEN24 0x00070000 /* DLEN: 24 bits */ +#define EPPI_CTL_DMIRR 0x00080000 /* Data Mirroring */ +#define EPPI_CTL_SKIPEN 0x00100000 /* Skip Enable */ +#define EPPI_CTL_SKIPEO 0x00200000 /* Skip Even or Odd */ +#define EPPI_CTL_PACKEN 0x00400000 /* Pack/Unpack Enable */ +#define EPPI_CTL_SWAPEN 0x00800000 /* Swap Enable */ +#define EPPI_CTL_SPLTEO 0x01000000 /* Split Even and Odd Data Samples */ +#define EPPI_CTL_SUBSPLTODD 0x02000000 /* Sub-Split Odd Samples */ +#define EPPI_CTL_SPLTWRD 0x04000000 /* Split Word */ +#define EPPI_CTL_RGBFMTEN 0x08000000 /* RGB Formatting Enable */ +#define EPPI_CTL_DMACFG 0x10000000 /* One or Two DMA Channels Mode */ +#define EPPI_CTL_DMAFINEN 0x20000000 /* DMA Finish Enable */ +#define EPPI_CTL_MUXSEL 0x40000000 /* MUX Select */ +#define EPPI_CTL_CLKGATEN 0x80000000 /* Clock Gating Enable */ + +#define EPPI_FS2_WLVB_F2VBAD 0xFF000000 /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking after field 2 */ +#define EPPI_FS2_WLVB_F2VBBD 0x00FF0000 /* In GP transmit mode with BLANKGEN = 1, contains number of lines of vertical blanking before field 2 */ +#define EPPI_FS2_WLVB_F1VBAD 0x0000FF00 /* In GP transmit mode with, BLANKGEN = 1, contains number of lines of vertical blanking after field 1 */ +#define EPPI_FS2_WLVB_F1VBBD 0x000000FF /* In GP 2, or 3 FS modes used to generate PPIx_FS2 width (32-bit). In GP Transmit mode, with BLANKGEN=1, contains the number of lines of Vertical blanking before field 1. */ + +#define EPPI_FS2_PALPF_F2ACT 0xFFFF0000 /* Number of lines of Active Data in Field 2 */ +#define EPPI_FS2_PALPF_F1ACT 0x0000FFFF /* Number of lines of Active Data in Field 1 */ + +#define EPPI_IMSK_CFIFOERR 0x00000001 /* Mask CFIFO Underflow or Overflow Error Interrupt */ +#define EPPI_IMSK_YFIFOERR 0x00000002 /* Mask YFIFO Underflow or Overflow Error Interrupt */ +#define EPPI_IMSK_LTERROVR 0x00000004 /* Mask Line Track Overflow Error Interrupt */ +#define EPPI_IMSK_LTERRUNDR 0x00000008 /* Mask Line Track Underflow Error Interrupt */ +#define EPPI_IMSK_FTERROVR 0x00000010 /* Mask Frame Track Overflow Error Interrupt */ +#define EPPI_IMSK_FTERRUNDR 0x00000020 /* Mask Frame Track Underflow Error Interrupt */ +#define EPPI_IMSK_ERRNCOR 0x00000040 /* Mask ITU Preamble Error Not Corrected Interrupt */ +#define EPPI_IMSK_PXPERR 0x00000080 /* Mask PxP Ready Error Interrupt */ + +#define EPPI_ODDCLIP_HIGHODD 0xFFFF0000 +#define EPPI_ODDCLIP_LOWODD 0x0000FFFF + +#define EPPI_EVENCLIP_HIGHEVEN 0xFFFF0000 +#define EPPI_EVENCLIP_LOWEVEN 0x0000FFFF + +#define EPPI_CTL2_FS1FINEN 0x00000002 /* HSYNC Finish Enable */ +#endif #endif diff --git a/arch/blackfin/include/asm/bfin_rotary.h b/arch/blackfin/include/asm/bfin_rotary.h index 0b6910bdc57f..8895a750c70c 100644 --- a/arch/blackfin/include/asm/bfin_rotary.h +++ b/arch/blackfin/include/asm/bfin_rotary.h @@ -39,6 +39,7 @@ struct bfin_rotary_platform_data { unsigned int rotary_rel_code; unsigned short debounce; /* 0..17 */ unsigned short mode; + unsigned short pm_wakeup; }; /* CNT_CONFIG bitmasks */ diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index 68bcc3d119b6..8597158010b5 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -18,7 +18,7 @@ defined(CONFIG_BFIN_UART1_CTSRTS) || \ defined(CONFIG_BFIN_UART2_CTSRTS) || \ defined(CONFIG_BFIN_UART3_CTSRTS) -# ifdef BFIN_UART_BF54X_STYLE +# if defined(BFIN_UART_BF54X_STYLE) || defined(BFIN_UART_BF60X_STYLE) # define CONFIG_SERIAL_BFIN_HARD_CTSRTS # else # define CONFIG_SERIAL_BFIN_CTSRTS @@ -58,14 +58,69 @@ struct bfin_serial_port { #endif }; +#ifdef BFIN_UART_BF60X_STYLE + +/* UART_CTL Masks */ +#define UCEN 0x1 /* Enable UARTx Clocks */ +#define LOOP_ENA 0x2 /* Loopback Mode Enable */ +#define UMOD_MDB 0x10 /* Enable MDB Mode */ +#define UMOD_IRDA 0x20 /* Enable IrDA Mode */ +#define UMOD_MASK 0x30 /* Uart Mode Mask */ +#define WLS(x) (((x-5) & 0x03) << 8) /* Word Length Select */ +#define WLS_MASK 0x300 /* Word length Select Mask */ +#define WLS_OFFSET 8 /* Word length Select Offset */ +#define STB 0x1000 /* Stop Bits */ +#define STBH 0x2000 /* Half Stop Bits */ +#define PEN 0x4000 /* Parity Enable */ +#define EPS 0x8000 /* Even Parity Select */ +#define STP 0x10000 /* Stick Parity */ +#define FPE 0x20000 /* Force Parity Error On Transmit */ +#define FFE 0x40000 /* Force Framing Error On Transmit */ +#define SB 0x80000 /* Set Break */ +#define LCR_MASK (SB | STP | EPS | PEN | STB | WLS_MASK) +#define FCPOL 0x400000 /* Flow Control Pin Polarity */ +#define RPOLC 0x800000 /* IrDA RX Polarity Change */ +#define TPOLC 0x1000000 /* IrDA TX Polarity Change */ +#define MRTS 0x2000000 /* Manual Request To Send */ +#define XOFF 0x4000000 /* Transmitter Off */ +#define ARTS 0x8000000 /* Automatic Request To Send */ +#define ACTS 0x10000000 /* Automatic Clear To Send */ +#define RFIT 0x20000000 /* Receive FIFO IRQ Threshold */ +#define RFRT 0x40000000 /* Receive FIFO RTS Threshold */ + +/* UART_STAT Masks */ +#define DR 0x01 /* Data Ready */ +#define OE 0x02 /* Overrun Error */ +#define PE 0x04 /* Parity Error */ +#define FE 0x08 /* Framing Error */ +#define BI 0x10 /* Break Interrupt */ +#define THRE 0x20 /* THR Empty */ +#define TEMT 0x80 /* TSR and UART_THR Empty */ +#define TFI 0x100 /* Transmission Finished Indicator */ + +#define ASTKY 0x200 /* Address Sticky */ +#define ADDR 0x400 /* Address bit status */ +#define RO 0x800 /* Reception Ongoing */ +#define SCTS 0x1000 /* Sticky CTS */ +#define CTS 0x10000 /* Clear To Send */ +#define RFCS 0x20000 /* Receive FIFO Count Status */ + +/* UART_CLOCK Masks */ +#define EDBO 0x80000000 /* Enable Devide by One */ + +#else /* BFIN_UART_BF60X_STYLE */ + /* UART_LCR Masks */ #define WLS(x) (((x)-5) & 0x03) /* Word Length Select */ +#define WLS_MASK 0x03 /* Word length Select Mask */ +#define WLS_OFFSET 0 /* Word length Select Offset */ #define STB 0x04 /* Stop Bits */ #define PEN 0x08 /* Parity Enable */ #define EPS 0x10 /* Even Parity Select */ #define STP 0x20 /* Stick Parity */ #define SB 0x40 /* Set Break */ #define DLAB 0x80 /* Divisor Latch Access */ +#define LCR_MASK (SB | STP | EPS | PEN | STB | WLS_MASK) /* UART_LSR Masks */ #define DR 0x01 /* Data Ready */ @@ -77,15 +132,6 @@ struct bfin_serial_port { #define TEMT 0x40 /* TSR and UART_THR Empty */ #define TFI 0x80 /* Transmission Finished Indicator */ -/* UART_IER Masks */ -#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ -#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ -#define ELSI 0x04 /* Enable RX Status Interrupt */ -#define EDSSI 0x08 /* Enable Modem Status Interrupt */ -#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ -#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ -#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ - /* UART_MCR Masks */ #define XOFF 0x01 /* Transmitter Off */ #define MRTS 0x02 /* Manual Request To Send */ @@ -103,13 +149,36 @@ struct bfin_serial_port { /* UART_GCTL Masks */ #define UCEN 0x01 /* Enable UARTx Clocks */ -#define IREN 0x02 /* Enable IrDA Mode */ +#define UMOD_IRDA 0x02 /* Enable IrDA Mode */ +#define UMOD_MASK 0x02 /* Uart Mode Mask */ #define TPOLC 0x04 /* IrDA TX Polarity Change */ #define RPOLC 0x08 /* IrDA RX Polarity Change */ #define FPE 0x10 /* Force Parity Error On Transmit */ #define FFE 0x20 /* Force Framing Error On Transmit */ -#ifdef BFIN_UART_BF54X_STYLE +#endif /* BFIN_UART_BF60X_STYLE */ + +/* UART_IER Masks */ +#define ERBFI 0x01 /* Enable Receive Buffer Full Interrupt */ +#define ETBEI 0x02 /* Enable Transmit Buffer Empty Interrupt */ +#define ELSI 0x04 /* Enable RX Status Interrupt */ +#define EDSSI 0x08 /* Enable Modem Status Interrupt */ +#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */ +#define ETFI 0x20 /* Enable Transmission Finished Interrupt */ +#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */ + +#if defined(BFIN_UART_BF60X_STYLE) +# define OFFSET_REDIV 0x00 /* Version ID Register */ +# define OFFSET_CTL 0x04 /* Control Register */ +# define OFFSET_STAT 0x08 /* Status Register */ +# define OFFSET_SCR 0x0C /* SCR Scratch Register */ +# define OFFSET_CLK 0x10 /* Clock Rate Register */ +# define OFFSET_IER 0x14 /* Interrupt Enable Register */ +# define OFFSET_IER_SET 0x18 /* Set Interrupt Enable Register */ +# define OFFSET_IER_CLEAR 0x1C /* Clear Interrupt Enable Register */ +# define OFFSET_RBR 0x20 /* Receive Buffer register */ +# define OFFSET_THR 0x24 /* Transmit Holding register */ +#elif defined(BFIN_UART_BF54X_STYLE) # define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */ # define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */ # define OFFSET_GCTL 0x08 /* Global Control Register */ @@ -145,7 +214,23 @@ struct bfin_serial_port { */ #define __BFP(m) u16 m; u16 __pad_##m struct bfin_uart_regs { -#ifdef BFIN_UART_BF54X_STYLE +#if defined(BFIN_UART_BF60X_STYLE) + u32 revid; + u32 ctl; + u32 stat; + u32 scr; + u32 clk; + u32 ier; + u32 ier_set; + u32 ier_clear; + u32 rbr; + u32 thr; + u32 taip; + u32 tsr; + u32 rsr; + u32 txdiv; + u32 rxdiv; +#elif defined(BFIN_UART_BF54X_STYLE) __BFP(dll); __BFP(dlh); __BFP(gctl); @@ -182,13 +267,70 @@ struct bfin_uart_regs { }; #undef __BFP +#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) + +/* #ifndef port_membase # define port_membase(p) 0 #endif +*/ +#ifdef BFIN_UART_BF60X_STYLE + +#define UART_GET_CHAR(p) bfin_read32(port_membase(p) + OFFSET_RBR) +#define UART_GET_CLK(p) bfin_read32(port_membase(p) + OFFSET_CLK) +#define UART_GET_CTL(p) bfin_read32(port_membase(p) + OFFSET_CTL) +#define UART_GET_GCTL(p) UART_GET_CTL(p) +#define UART_GET_LCR(p) UART_GET_CTL(p) +#define UART_GET_MCR(p) UART_GET_CTL(p) +#if ANOMALY_05001001 +#define UART_GET_STAT(p) \ +({ \ + u32 __ret; \ + unsigned long flags; \ + flags = hard_local_irq_save(); \ + __ret = bfin_read32(port_membase(p) + OFFSET_STAT); \ + hard_local_irq_restore(flags); \ + __ret; \ +}) +#else +#define UART_GET_STAT(p) bfin_read32(port_membase(p) + OFFSET_STAT) +#endif +#define UART_GET_MSR(p) UART_GET_STAT(p) + +#define UART_PUT_CHAR(p, v) bfin_write32(port_membase(p) + OFFSET_THR, v) +#define UART_PUT_CLK(p, v) bfin_write32(port_membase(p) + OFFSET_CLK, v) +#define UART_PUT_CTL(p, v) bfin_write32(port_membase(p) + OFFSET_CTL, v) +#define UART_PUT_GCTL(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_LCR(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_MCR(p, v) UART_PUT_CTL(p, v) +#define UART_PUT_STAT(p, v) bfin_write32(port_membase(p) + OFFSET_STAT, v) + +#define UART_CLEAR_IER(p, v) bfin_write32(port_membase(p) + OFFSET_IER_CLEAR, v) +#define UART_GET_IER(p) bfin_read32(port_membase(p) + OFFSET_IER) +#define UART_SET_IER(p, v) bfin_write32(port_membase(p) + OFFSET_IER_SET, v) + +#define UART_CLEAR_DLAB(p) /* MMRs not muxed on BF60x */ +#define UART_SET_DLAB(p) /* MMRs not muxed on BF60x */ + +#define UART_CLEAR_LSR(p) UART_PUT_STAT(p, -1) +#define UART_GET_LSR(p) UART_GET_STAT(p) +#define UART_PUT_LSR(p, v) UART_PUT_STAT(p, v) + +/* This handles hard CTS/RTS */ +#define BFIN_UART_CTSRTS_HARD +#define UART_CLEAR_SCTS(p) UART_PUT_STAT(p, SCTS) +#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) +#define UART_DISABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) & ~(ARTS | MRTS)) +#define UART_ENABLE_RTS(x) UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS | ARTS) +#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) +#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) + +#else /* BFIN_UART_BF60X_STYLE */ #define UART_GET_CHAR(p) bfin_read16(port_membase(p) + OFFSET_RBR) #define UART_GET_DLL(p) bfin_read16(port_membase(p) + OFFSET_DLL) #define UART_GET_DLH(p) bfin_read16(port_membase(p) + OFFSET_DLH) +#define UART_GET_CLK(p) ((UART_GET_DLH(p) << 8) | UART_GET_DLL(p)) #define UART_GET_GCTL(p) bfin_read16(port_membase(p) + OFFSET_GCTL) #define UART_GET_LCR(p) bfin_read16(port_membase(p) + OFFSET_LCR) #define UART_GET_MCR(p) bfin_read16(port_membase(p) + OFFSET_MCR) @@ -197,6 +339,11 @@ struct bfin_uart_regs { #define UART_PUT_CHAR(p, v) bfin_write16(port_membase(p) + OFFSET_THR, v) #define UART_PUT_DLL(p, v) bfin_write16(port_membase(p) + OFFSET_DLL, v) #define UART_PUT_DLH(p, v) bfin_write16(port_membase(p) + OFFSET_DLH, v) +#define UART_PUT_CLK(p, v) do \ +{\ +UART_PUT_DLL(p, v & 0xFF); \ +UART_PUT_DLH(p, (v >> 8) & 0xFF); } while (0); + #define UART_PUT_GCTL(p, v) bfin_write16(port_membase(p) + OFFSET_GCTL, v) #define UART_PUT_LCR(p, v) bfin_write16(port_membase(p) + OFFSET_LCR, v) #define UART_PUT_MCR(p, v) bfin_write16(port_membase(p) + OFFSET_MCR, v) @@ -233,12 +380,17 @@ struct bfin_uart_regs { #define UART_CLEAR_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) & ~DLAB); SSYNC(); } while (0) #define UART_SET_DLAB(p) do { UART_PUT_LCR(p, UART_GET_LCR(p) | DLAB); SSYNC(); } while (0) +#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) +#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) + +/* #ifndef put_lsr_cache # define put_lsr_cache(p, v) #endif #ifndef get_lsr_cache # define get_lsr_cache(p) 0 #endif +*/ /* The hardware clears the LSR bits upon read, so we need to cache * some of the more fun bits in software so they don't get lost @@ -267,7 +419,9 @@ static inline void UART_PUT_LSR(void *p, uint16_t val) #define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) #define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) -#endif +#endif /* BFIN_UART_BF54X_STYLE */ + +#endif /* BFIN_UART_BF60X_STYLE */ #ifndef BFIN_UART_TX_FIFO_SIZE # define BFIN_UART_TX_FIFO_SIZE 2 diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index 0afcfbd54a82..f8907ea6b5b6 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -24,6 +24,7 @@ struct sport_config { /* TDM (multichannels), I2S or other mode */ unsigned int mode:3; + unsigned int polled; /* use poll instead of irq when set */ /* if TDM mode is selected, channels must be set */ int channels; /* Must be in 8 units */ diff --git a/arch/blackfin/include/asm/bfin_sport3.h b/arch/blackfin/include/asm/bfin_sport3.h new file mode 100644 index 000000000000..03c00220d69b --- /dev/null +++ b/arch/blackfin/include/asm/bfin_sport3.h @@ -0,0 +1,107 @@ +/* + * bfin_sport - Analog Devices BF6XX SPORT registers + * + * Copyright (c) 2012 Analog Devices Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _BFIN_SPORT3_H_ +#define _BFIN_SPORT3_H_ + +#include <linux/types.h> + +#define SPORT_CTL_SPENPRI 0x00000001 /* Enable Primary Channel */ +#define SPORT_CTL_DTYPE 0x00000006 /* Data type select */ +#define SPORT_CTL_RJUSTIFY_ZFILL 0x00000000 /* DTYPE: MCM mode: Right-justify, zero-fill unused MSBs */ +#define SPORT_CTL_RJUSTIFY_SFILL 0x00000002 /* DTYPE: MCM mode: Right-justify, sign-extend unused MSBs */ +#define SPORT_CTL_USE_U_LAW 0x00000004 /* DTYPE: MCM mode: Compand using u-law */ +#define SPORT_CTL_USE_A_LAW 0x00000006 /* DTYPE: MCM mode: Compand using A-law */ +#define SPORT_CTL_LSBF 0x00000008 /* Serial bit endian select */ +#define SPORT_CTL_SLEN 0x000001F0 /* Serial Word length select */ +#define SPORT_CTL_PACK 0x00000200 /* 16-bit to 32-bit packing enable */ +#define SPORT_CTL_ICLK 0x00000400 /* Internal Clock Select */ +#define SPORT_CTL_OPMODE 0x00000800 /* Operation mode */ +#define SPORT_CTL_CKRE 0x00001000 /* Clock rising edge select */ +#define SPORT_CTL_FSR 0x00002000 /* Frame Sync required */ +#define SPORT_CTL_IFS 0x00004000 /* Internal Frame Sync select */ +#define SPORT_CTL_DIFS 0x00008000 /* Data-independent frame sync select */ +#define SPORT_CTL_LFS 0x00010000 /* Active low frame sync select */ +#define SPORT_CTL_LAFS 0x00020000 /* Late Transmit frame select */ +#define SPORT_CTL_RJUST 0x00040000 /* Right Justified mode select */ +#define SPORT_CTL_FSED 0x00080000 /* External frame sync edge select */ +#define SPORT_CTL_TFIEN 0x00100000 /* Transmit finish interrrupt enable select */ +#define SPORT_CTL_GCLKEN 0x00200000 /* Gated clock mode select */ +#define SPORT_CTL_SPENSEC 0x01000000 /* Enable secondary channel */ +#define SPORT_CTL_SPTRAN 0x02000000 /* Data direction control */ +#define SPORT_CTL_DERRSEC 0x04000000 /* Secondary channel error status */ +#define SPORT_CTL_DXSSEC 0x18000000 /* Secondary channel data buffer status */ +#define SPORT_CTL_SEC_EMPTY 0x00000000 /* DXSSEC: Empty */ +#define SPORT_CTL_SEC_PART_FULL 0x10000000 /* DXSSEC: Partially full */ +#define SPORT_CTL_SEC_FULL 0x18000000 /* DXSSEC: Full */ +#define SPORT_CTL_DERRPRI 0x20000000 /* Primary channel error status */ +#define SPORT_CTL_DXSPRI 0xC0000000 /* Primary channel data buffer status */ +#define SPORT_CTL_PRM_EMPTY 0x00000000 /* DXSPRI: Empty */ +#define SPORT_CTL_PRM_PART_FULL 0x80000000 /* DXSPRI: Partially full */ +#define SPORT_CTL_PRM_FULL 0xC0000000 /* DXSPRI: Full */ + +#define SPORT_DIV_CLKDIV 0x0000FFFF /* Clock divisor */ +#define SPORT_DIV_FSDIV 0xFFFF0000 /* Frame sync divisor */ + +#define SPORT_MCTL_MCE 0x00000001 /* Multichannel enable */ +#define SPORT_MCTL_MCPDE 0x00000004 /* Multichannel data packing select */ +#define SPORT_MCTL_MFD 0x000000F0 /* Multichannel frame delay */ +#define SPORT_MCTL_WSIZE 0x00007F00 /* Number of multichannel slots */ +#define SPORT_MCTL_WOFFSET 0x03FF0000 /* Window offset size */ + +#define SPORT_CNT_CLKCNT 0x0000FFFF /* Current state of clk div counter */ +#define SPORT_CNT_FSDIVCNT 0xFFFF0000 /* Current state of frame div counter */ + +#define SPORT_ERR_DERRPMSK 0x00000001 /* Primary channel data error interrupt enable */ +#define SPORT_ERR_DERRSMSK 0x00000002 /* Secondary channel data error interrupt enable */ +#define SPORT_ERR_FSERRMSK 0x00000004 /* Frame sync error interrupt enable */ +#define SPORT_ERR_DERRPSTAT 0x00000010 /* Primary channel data error status */ +#define SPORT_ERR_DERRSSTAT 0x00000020 /* Secondary channel data error status */ +#define SPORT_ERR_FSERRSTAT 0x00000040 /* Frame sync error status */ + +#define SPORT_MSTAT_CURCHAN 0x000003FF /* Channel which is being serviced in the multichannel operation */ + +#define SPORT_CTL2_FSMUXSEL 0x00000001 /* Frame Sync MUX Select */ +#define SPORT_CTL2_CKMUXSEL 0x00000002 /* Clock MUX Select */ +#define SPORT_CTL2_LBSEL 0x00000004 /* Loopback Select */ + +struct sport_register { + u32 spctl; + u32 div; + u32 spmctl; + u32 spcs0; + u32 spcs1; + u32 spcs2; + u32 spcs3; + u32 spcnt; + u32 sperrctl; + u32 spmstat; + u32 spctl2; + u32 txa; + u32 rxa; + u32 txb; + u32 rxb; + u32 revid; +}; + +struct bfin_snd_platform_data { + const unsigned short *pin_req; +}; + +#endif diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h index e767d649dfc4..2f3339a47626 100644 --- a/arch/blackfin/include/asm/bfin_twi.h +++ b/arch/blackfin/include/asm/bfin_twi.h @@ -10,6 +10,7 @@ #define __ASM_BFIN_TWI_H__ #include <linux/types.h> +#include <linux/i2c.h> /* * All Blackfin system MMRs are padded to 32bits even if the register @@ -42,4 +43,145 @@ struct bfin_twi_regs { #undef __BFP +struct bfin_twi_iface { + int irq; + spinlock_t lock; + char read_write; + u8 command; + u8 *transPtr; + int readNum; + int writeNum; + int cur_mode; + int manual_stop; + int result; + struct i2c_adapter adap; + struct completion complete; + struct i2c_msg *pmsg; + int msg_num; + int cur_msg; + u16 saved_clkdiv; + u16 saved_control; + struct bfin_twi_regs *regs_base; +}; + +#define DEFINE_TWI_REG(reg_name, reg) \ +static inline u16 read_##reg_name(struct bfin_twi_iface *iface) \ + { return iface->regs_base->reg; } \ +static inline void write_##reg_name(struct bfin_twi_iface *iface, u16 v) \ + { iface->regs_base->reg = v; } + +DEFINE_TWI_REG(CLKDIV, clkdiv) +DEFINE_TWI_REG(CONTROL, control) +DEFINE_TWI_REG(SLAVE_CTL, slave_ctl) +DEFINE_TWI_REG(SLAVE_STAT, slave_stat) +DEFINE_TWI_REG(SLAVE_ADDR, slave_addr) +DEFINE_TWI_REG(MASTER_CTL, master_ctl) +DEFINE_TWI_REG(MASTER_STAT, master_stat) +DEFINE_TWI_REG(MASTER_ADDR, master_addr) +DEFINE_TWI_REG(INT_STAT, int_stat) +DEFINE_TWI_REG(INT_MASK, int_mask) +DEFINE_TWI_REG(FIFO_CTL, fifo_ctl) +DEFINE_TWI_REG(FIFO_STAT, fifo_stat) +DEFINE_TWI_REG(XMT_DATA8, xmt_data8) +DEFINE_TWI_REG(XMT_DATA16, xmt_data16) +#if !ANOMALY_05001001 +DEFINE_TWI_REG(RCV_DATA8, rcv_data8) +DEFINE_TWI_REG(RCV_DATA16, rcv_data16) +#else +static inline u16 read_RCV_DATA8(struct bfin_twi_iface *iface) +{ + u16 ret; + unsigned long flags; + + flags = hard_local_irq_save(); + ret = iface->regs_base->rcv_data8; + hard_local_irq_restore(flags); + + return ret; +} + +static inline u16 read_RCV_DATA16(struct bfin_twi_iface *iface) +{ + u16 ret; + unsigned long flags; + + flags = hard_local_irq_save(); + ret = iface->regs_base->rcv_data16; + hard_local_irq_restore(flags); + + return ret; +} +#endif + + +/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ***********************/ +/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ +#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ +#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ + +/* TWI_PRESCALE Masks */ +#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ +#define TWI_ENA 0x0080 /* TWI Enable */ +#define SCCB 0x0200 /* SCCB Compatibility Enable */ + +/* TWI_SLAVE_CTL Masks */ +#define SEN 0x0001 /* Slave Enable */ +#define SADD_LEN 0x0002 /* Slave Address Length */ +#define STDVAL 0x0004 /* Slave Transmit Data Valid */ +#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */ +#define GEN 0x0010 /* General Call Address Matching Enabled */ + +/* TWI_SLAVE_STAT Masks */ +#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive*) */ +#define GCALL 0x0002 /* General Call Indicator */ + +/* TWI_MASTER_CTL Masks */ +#define MEN 0x0001 /* Master Mode Enable */ +#define MADD_LEN 0x0002 /* Master Address Length */ +#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ +#define FAST 0x0008 /* Use Fast Mode Timing Specs */ +#define STOP 0x0010 /* Issue Stop Condition */ +#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ +#define DCNT 0x3FC0 /* Data Bytes To Transfer */ +#define SDAOVR 0x4000 /* Serial Data Override */ +#define SCLOVR 0x8000 /* Serial Clock Override */ + +/* TWI_MASTER_STAT Masks */ +#define MPROG 0x0001 /* Master Transfer In Progress */ +#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ +#define ANAK 0x0004 /* Address Not Acknowledged */ +#define DNAK 0x0008 /* Data Not Acknowledged */ +#define BUFRDERR 0x0010 /* Buffer Read Error */ +#define BUFWRERR 0x0020 /* Buffer Write Error */ +#define SDASEN 0x0040 /* Serial Data Sense */ +#define SCLSEN 0x0080 /* Serial Clock Sense */ +#define BUSBUSY 0x0100 /* Bus Busy Indicator */ + +/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ +#define SINIT 0x0001 /* Slave Transfer Initiated */ +#define SCOMP 0x0002 /* Slave Transfer Complete */ +#define SERR 0x0004 /* Slave Transfer Error */ +#define SOVF 0x0008 /* Slave Overflow */ +#define MCOMP 0x0010 /* Master Transfer Complete */ +#define MERR 0x0020 /* Master Transfer Error */ +#define XMTSERV 0x0040 /* Transmit FIFO Service */ +#define RCVSERV 0x0080 /* Receive FIFO Service */ + +/* TWI_FIFO_CTRL Masks */ +#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ +#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ +#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ +#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ + +/* TWI_FIFO_STAT Masks */ +#define XMTSTAT 0x0003 /* Transmit FIFO Status */ +#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ +#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ +#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ + +#define RCVSTAT 0x000C /* Receive FIFO Status */ +#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ +#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ +#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ + #endif diff --git a/arch/blackfin/include/asm/blackfin.h b/arch/blackfin/include/asm/blackfin.h index 7be5368c0512..f111f366d758 100644 --- a/arch/blackfin/include/asm/blackfin.h +++ b/arch/blackfin/include/asm/blackfin.h @@ -63,20 +63,16 @@ static inline void CSYNC(void) #if ANOMALY_05000312 || ANOMALY_05000244 #define SSYNC(scratch) \ -do { \ cli scratch; \ nop; nop; nop; \ SSYNC; \ - sti scratch; \ -} while (0) + sti scratch; #define CSYNC(scratch) \ -do { \ cli scratch; \ nop; nop; nop; \ CSYNC; \ - sti scratch; \ -} while (0) + sti scratch; #else #define SSYNC(scratch) SSYNC; diff --git a/arch/blackfin/include/asm/clkdev.h b/arch/blackfin/include/asm/clkdev.h new file mode 100644 index 000000000000..9053beda8c50 --- /dev/null +++ b/arch/blackfin/include/asm/clkdev.h @@ -0,0 +1,14 @@ +#ifndef __ASM_CLKDEV__H_ +#define __ASM_CLKDEV__H_ + +#include <linux/slab.h> + +static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) +{ + return kzalloc(size, GFP_KERNEL); +} + +#define __clk_put(clk) +#define __clk_get(clk) ({ 1; }) + +#endif diff --git a/arch/blackfin/include/asm/clocks.h b/arch/blackfin/include/asm/clocks.h index 6f0b61852f58..9b3c85b3c288 100644 --- a/arch/blackfin/include/asm/clocks.h +++ b/arch/blackfin/include/asm/clocks.h @@ -48,4 +48,27 @@ # define CONFIG_VCO_MULT 0 #endif +#include <linux/clk.h> + +struct clk_ops { + unsigned long (*get_rate)(struct clk *clk); + unsigned long (*round_rate)(struct clk *clk, unsigned long rate); + int (*set_rate)(struct clk *clk, unsigned long rate); + int (*enable)(struct clk *clk); + int (*disable)(struct clk *clk); +}; + +struct clk { + struct clk *parent; + const char *name; + unsigned long rate; + spinlock_t lock; + u32 flags; + const struct clk_ops *ops; + void __iomem *reg; + u32 mask; + u32 shift; +}; + +int clk_init(void); #endif diff --git a/arch/blackfin/include/asm/cplb.h b/arch/blackfin/include/asm/cplb.h index fda96261ed62..5c37f620c4b3 100644 --- a/arch/blackfin/include/asm/cplb.h +++ b/arch/blackfin/include/asm/cplb.h @@ -62,6 +62,10 @@ #define SIZE_4K 0x00001000 /* 4K */ #define SIZE_1M 0x00100000 /* 1M */ #define SIZE_4M 0x00400000 /* 4M */ +#define SIZE_16K 0x00004000 /* 16K */ +#define SIZE_64K 0x00010000 /* 64K */ +#define SIZE_16M 0x01000000 /* 16M */ +#define SIZE_64M 0x04000000 /* 64M */ #define MAX_CPLBS 16 diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h index 823679011457..fe0ca03a1cb2 100644 --- a/arch/blackfin/include/asm/def_LPBlackfin.h +++ b/arch/blackfin/include/asm/def_LPBlackfin.h @@ -3,7 +3,7 @@ * * Copyright 2005-2008 Analog Devices Inc. * - * Licensed under the ADI BSD license or GPL-2 (or later). + * Licensed under the Clear BSD license or GPL-2 (or later). */ #ifndef _DEF_LPBLACKFIN_H @@ -622,6 +622,10 @@ do { \ #define PAGE_SIZE_4KB 0x00010000 /* 4 KB page size */ #define PAGE_SIZE_1MB 0x00020000 /* 1 MB page size */ #define PAGE_SIZE_4MB 0x00030000 /* 4 MB page size */ +#define PAGE_SIZE_16KB 0x00040000 /* 16 KB page size */ +#define PAGE_SIZE_64KB 0x00050000 /* 64 KB page size */ +#define PAGE_SIZE_16MB 0x00060000 /* 16 MB page size */ +#define PAGE_SIZE_64MB 0x00070000 /* 64 MB page size */ #define CPLB_L1SRAM 0x00000020 /* 0=SRAM mapped in L1, 0=SRAM not * mapped to L1 */ diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index dac0c97242bb..40e9c2bbc6e3 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -22,12 +22,22 @@ #define DATA_SIZE_8 0 #define DATA_SIZE_16 1 #define DATA_SIZE_32 2 +#ifdef CONFIG_BF60x +#define DATA_SIZE_64 3 +#endif #define DMA_FLOW_STOP 0 #define DMA_FLOW_AUTO 1 +#ifdef CONFIG_BF60x +#define DMA_FLOW_LIST 4 +#define DMA_FLOW_ARRAY 5 +#define DMA_FLOW_LIST_DEMAND 6 +#define DMA_FLOW_ARRAY_DEMAND 7 +#else #define DMA_FLOW_ARRAY 4 #define DMA_FLOW_SMALL 6 #define DMA_FLOW_LARGE 7 +#endif #define DIMENSION_LINEAR 0 #define DIMENSION_2D 1 @@ -36,26 +46,80 @@ #define DIR_WRITE 1 #define INTR_DISABLE 0 +#ifdef CONFIG_BF60x +#define INTR_ON_PERI 1 +#endif #define INTR_ON_BUF 2 #define INTR_ON_ROW 3 #define DMA_NOSYNC_KEEP_DMA_BUF 0 #define DMA_SYNC_RESTART 1 +#ifdef DMA_MMR_SIZE_32 +#define DMA_MMR_SIZE_TYPE long +#define DMA_MMR_READ bfin_read32 +#define DMA_MMR_WRITE bfin_write32 +#else +#define DMA_MMR_SIZE_TYPE short +#define DMA_MMR_READ bfin_read16 +#define DMA_MMR_WRITE bfin_write16 +#endif + +struct dma_desc_array { + unsigned long start_addr; + unsigned DMA_MMR_SIZE_TYPE cfg; + unsigned DMA_MMR_SIZE_TYPE x_count; + DMA_MMR_SIZE_TYPE x_modify; +} __attribute__((packed)); + struct dmasg { void *next_desc_addr; unsigned long start_addr; - unsigned short cfg; - unsigned short x_count; - short x_modify; - unsigned short y_count; - short y_modify; + unsigned DMA_MMR_SIZE_TYPE cfg; + unsigned DMA_MMR_SIZE_TYPE x_count; + DMA_MMR_SIZE_TYPE x_modify; + unsigned DMA_MMR_SIZE_TYPE y_count; + DMA_MMR_SIZE_TYPE y_modify; } __attribute__((packed)); struct dma_register { void *next_desc_ptr; /* DMA Next Descriptor Pointer register */ unsigned long start_addr; /* DMA Start address register */ +#ifdef CONFIG_BF60x + unsigned long cfg; /* DMA Configuration register */ + unsigned long x_count; /* DMA x_count register */ + + long x_modify; /* DMA x_modify register */ + + unsigned long y_count; /* DMA y_count register */ + + long y_modify; /* DMA y_modify register */ + + unsigned long reserved; + unsigned long reserved2; + + void *curr_desc_ptr; /* DMA Current Descriptor Pointer + register */ + void *prev_desc_ptr; /* DMA previous initial Descriptor Pointer + register */ + unsigned long curr_addr_ptr; /* DMA Current Address Pointer + register */ + unsigned long irq_status; /* DMA irq status register */ + + unsigned long curr_x_count; /* DMA Current x-count register */ + + unsigned long curr_y_count; /* DMA Current y-count register */ + + unsigned long reserved3; + + unsigned long bw_limit_count; /* DMA band width limit count register */ + unsigned long curr_bw_limit_count; /* DMA Current band width limit + count register */ + unsigned long bw_monitor_count; /* DMA band width limit count register */ + unsigned long curr_bw_monitor_count; /* DMA Current band width limit + count register */ +#else unsigned short cfg; /* DMA Configuration register */ unsigned short dummy1; /* DMA Configuration register */ @@ -92,6 +156,7 @@ struct dma_register { unsigned short dummy9; unsigned long reserved3; +#endif }; @@ -131,23 +196,23 @@ static inline void set_dma_curr_desc_addr(unsigned int channel, void *addr) { dma_ch[channel].regs->curr_desc_ptr = addr; } -static inline void set_dma_x_count(unsigned int channel, unsigned short x_count) +static inline void set_dma_x_count(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE x_count) { dma_ch[channel].regs->x_count = x_count; } -static inline void set_dma_y_count(unsigned int channel, unsigned short y_count) +static inline void set_dma_y_count(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE y_count) { dma_ch[channel].regs->y_count = y_count; } -static inline void set_dma_x_modify(unsigned int channel, short x_modify) +static inline void set_dma_x_modify(unsigned int channel, DMA_MMR_SIZE_TYPE x_modify) { dma_ch[channel].regs->x_modify = x_modify; } -static inline void set_dma_y_modify(unsigned int channel, short y_modify) +static inline void set_dma_y_modify(unsigned int channel, DMA_MMR_SIZE_TYPE y_modify) { dma_ch[channel].regs->y_modify = y_modify; } -static inline void set_dma_config(unsigned int channel, unsigned short config) +static inline void set_dma_config(unsigned int channel, unsigned DMA_MMR_SIZE_TYPE config) { dma_ch[channel].regs->cfg = config; } @@ -156,23 +221,55 @@ static inline void set_dma_curr_addr(unsigned int channel, unsigned long addr) dma_ch[channel].regs->curr_addr_ptr = addr; } -static inline unsigned short +#ifdef CONFIG_BF60x +static inline unsigned long +set_bfin_dma_config2(char direction, char flow_mode, char intr_mode, + char dma_mode, char mem_width, char syncmode, char peri_width) +{ + unsigned long config = 0; + + switch (intr_mode) { + case INTR_ON_BUF: + if (dma_mode == DIMENSION_2D) + config = DI_EN_Y; + else + config = DI_EN_X; + break; + case INTR_ON_ROW: + config = DI_EN_X; + break; + case INTR_ON_PERI: + config = DI_EN_P; + break; + }; + + return config | (direction << 1) | (mem_width << 8) | (dma_mode << 26) | + (flow_mode << 12) | (syncmode << 2) | (peri_width << 4); +} +#endif + +static inline unsigned DMA_MMR_SIZE_TYPE set_bfin_dma_config(char direction, char flow_mode, - char intr_mode, char dma_mode, char width, char syncmode) + char intr_mode, char dma_mode, char mem_width, char syncmode) { - return (direction << 1) | (width << 2) | (dma_mode << 4) | +#ifdef CONFIG_BF60x + return set_bfin_dma_config2(direction, flow_mode, intr_mode, dma_mode, + mem_width, syncmode, mem_width); +#else + return (direction << 1) | (mem_width << 2) | (dma_mode << 4) | (intr_mode << 6) | (flow_mode << 12) | (syncmode << 5); +#endif } -static inline unsigned short get_dma_curr_irqstat(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_irqstat(unsigned int channel) { return dma_ch[channel].regs->irq_status; } -static inline unsigned short get_dma_curr_xcount(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_xcount(unsigned int channel) { return dma_ch[channel].regs->curr_x_count; } -static inline unsigned short get_dma_curr_ycount(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_curr_ycount(unsigned int channel) { return dma_ch[channel].regs->curr_y_count; } @@ -184,7 +281,7 @@ static inline void *get_dma_curr_desc_ptr(unsigned int channel) { return dma_ch[channel].regs->curr_desc_ptr; } -static inline unsigned short get_dma_config(unsigned int channel) +static inline unsigned DMA_MMR_SIZE_TYPE get_dma_config(unsigned int channel) { return dma_ch[channel].regs->cfg; } @@ -203,8 +300,8 @@ static inline void set_dma_sg(unsigned int channel, struct dmasg *sg, int ndsize dma_ch[channel].regs->next_desc_ptr = sg; dma_ch[channel].regs->cfg = - (dma_ch[channel].regs->cfg & ~(0xf << 8)) | - ((ndsize & 0xf) << 8); + (dma_ch[channel].regs->cfg & ~NDSIZE) | + ((ndsize << NDSIZE_OFFSET) & NDSIZE); } static inline int dma_channel_active(unsigned int channel) @@ -239,7 +336,7 @@ static inline void dma_enable_irq(unsigned int channel) } static inline void clear_dma_irqstat(unsigned int channel) { - dma_ch[channel].regs->irq_status = DMA_DONE | DMA_ERR; + dma_ch[channel].regs->irq_status = DMA_DONE | DMA_ERR | DMA_PIRQ; } void *dma_memcpy(void *dest, const void *src, size_t count); diff --git a/arch/blackfin/include/asm/dpmc.h b/arch/blackfin/include/asm/dpmc.h index c4ec959dad78..e91eae8330a6 100644 --- a/arch/blackfin/include/asm/dpmc.h +++ b/arch/blackfin/include/asm/dpmc.h @@ -9,6 +9,651 @@ #ifndef _BLACKFIN_DPMC_H_ #define _BLACKFIN_DPMC_H_ +#ifdef __ASSEMBLY__ +#define PM_REG0 R7 +#define PM_REG1 R6 +#define PM_REG2 R5 +#define PM_REG3 R4 +#define PM_REG4 R3 +#define PM_REG5 R2 +#define PM_REG6 R1 +#define PM_REG7 R0 +#define PM_REG8 P5 +#define PM_REG9 P4 +#define PM_REG10 P3 +#define PM_REG11 P2 +#define PM_REG12 P1 +#define PM_REG13 P0 + +#define PM_REGSET0 R7:7 +#define PM_REGSET1 R7:6 +#define PM_REGSET2 R7:5 +#define PM_REGSET3 R7:4 +#define PM_REGSET4 R7:3 +#define PM_REGSET5 R7:2 +#define PM_REGSET6 R7:1 +#define PM_REGSET7 R7:0 +#define PM_REGSET8 R7:0, P5:5 +#define PM_REGSET9 R7:0, P5:4 +#define PM_REGSET10 R7:0, P5:3 +#define PM_REGSET11 R7:0, P5:2 +#define PM_REGSET12 R7:0, P5:1 +#define PM_REGSET13 R7:0, P5:0 + +#define _PM_PUSH(n, x, w, base) PM_REG##n = w[FP + ((x) - (base))]; +#define _PM_POP(n, x, w, base) w[FP + ((x) - (base))] = PM_REG##n; +#define PM_PUSH_SYNC(n) [--sp] = (PM_REGSET##n); +#define PM_POP_SYNC(n) (PM_REGSET##n) = [sp++]; +#define PM_PUSH(n, x) PM_REG##n = [FP++]; +#define PM_POP(n, x) [FP--] = PM_REG##n; +#define PM_CORE_PUSH(n, x) _PM_PUSH(n, x, , COREMMR_BASE) +#define PM_CORE_POP(n, x) _PM_POP(n, x, , COREMMR_BASE) +#define PM_SYS_PUSH(n, x) _PM_PUSH(n, x, , SYSMMR_BASE) +#define PM_SYS_POP(n, x) _PM_POP(n, x, , SYSMMR_BASE) +#define PM_SYS_PUSH16(n, x) _PM_PUSH(n, x, w, SYSMMR_BASE) +#define PM_SYS_POP16(n, x) _PM_POP(n, x, w, SYSMMR_BASE) + + .macro bfin_init_pm_bench_cycles +#ifdef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH + R4 = 0; + CYCLES = R4; + CYCLES2 = R4; + R4 = SYSCFG; + BITSET(R4, 1); + SYSCFG = R4; +#endif + .endm + + .macro bfin_cpu_reg_save + /* + * Save the core regs early so we can blow them away when + * saving/restoring MMR states + */ + [--sp] = (R7:0, P5:0); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + /* We can't push RETI directly as that'll change IPEND[4] */ + r7 = RETI; + [--sp] = RETS; + [--sp] = ASTAT; +#ifndef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH + [--sp] = CYCLES; + [--sp] = CYCLES2; +#endif + [--sp] = SYSCFG; + [--sp] = RETX; + [--sp] = SEQSTAT; + [--sp] = r7; + + /* Save first func arg in M3 */ + M3 = R0; + .endm + + .macro bfin_cpu_reg_restore + /* Restore Core Registers */ + RETI = [sp++]; + SEQSTAT = [sp++]; + RETX = [sp++]; + SYSCFG = [sp++]; +#ifndef CONFIG_BFIN_PM_WAKEUP_TIME_BENCH + CYCLES2 = [sp++]; + CYCLES = [sp++]; +#endif + ASTAT = [sp++]; + RETS = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + usp = [sp++]; + fp = [sp++]; + (R7:0, P5:0) = [sp++]; + + .endm + + .macro bfin_sys_mmr_save + /* Save system MMRs */ + FP.H = hi(SYSMMR_BASE); + FP.L = lo(SYSMMR_BASE); +#ifdef SIC_IMASK0 + PM_SYS_PUSH(0, SIC_IMASK0) + PM_SYS_PUSH(1, SIC_IMASK1) +# ifdef SIC_IMASK2 + PM_SYS_PUSH(2, SIC_IMASK2) +# endif +#else +# ifdef SIC_IMASK + PM_SYS_PUSH(0, SIC_IMASK) +# endif +#endif + +#ifdef SIC_IAR0 + PM_SYS_PUSH(3, SIC_IAR0) + PM_SYS_PUSH(4, SIC_IAR1) + PM_SYS_PUSH(5, SIC_IAR2) +#endif +#ifdef SIC_IAR3 + PM_SYS_PUSH(6, SIC_IAR3) +#endif +#ifdef SIC_IAR4 + PM_SYS_PUSH(7, SIC_IAR4) + PM_SYS_PUSH(8, SIC_IAR5) + PM_SYS_PUSH(9, SIC_IAR6) +#endif +#ifdef SIC_IAR7 + PM_SYS_PUSH(10, SIC_IAR7) +#endif +#ifdef SIC_IAR8 + PM_SYS_PUSH(11, SIC_IAR8) + PM_SYS_PUSH(12, SIC_IAR9) + PM_SYS_PUSH(13, SIC_IAR10) +#endif + PM_PUSH_SYNC(13) +#ifdef SIC_IAR11 + PM_SYS_PUSH(0, SIC_IAR11) +#endif + +#ifdef SIC_IWR + PM_SYS_PUSH(1, SIC_IWR) +#endif +#ifdef SIC_IWR0 + PM_SYS_PUSH(1, SIC_IWR0) +#endif +#ifdef SIC_IWR1 + PM_SYS_PUSH(2, SIC_IWR1) +#endif +#ifdef SIC_IWR2 + PM_SYS_PUSH(3, SIC_IWR2) +#endif + +#ifdef PINT0_ASSIGN + PM_SYS_PUSH(4, PINT0_MASK_SET) + PM_SYS_PUSH(5, PINT1_MASK_SET) + PM_SYS_PUSH(6, PINT2_MASK_SET) + PM_SYS_PUSH(7, PINT3_MASK_SET) + PM_SYS_PUSH(8, PINT0_ASSIGN) + PM_SYS_PUSH(9, PINT1_ASSIGN) + PM_SYS_PUSH(10, PINT2_ASSIGN) + PM_SYS_PUSH(11, PINT3_ASSIGN) + PM_SYS_PUSH(12, PINT0_INVERT_SET) + PM_SYS_PUSH(13, PINT1_INVERT_SET) + PM_PUSH_SYNC(13) + PM_SYS_PUSH(0, PINT2_INVERT_SET) + PM_SYS_PUSH(1, PINT3_INVERT_SET) + PM_SYS_PUSH(2, PINT0_EDGE_SET) + PM_SYS_PUSH(3, PINT1_EDGE_SET) + PM_SYS_PUSH(4, PINT2_EDGE_SET) + PM_SYS_PUSH(5, PINT3_EDGE_SET) +#endif + +#ifdef SYSCR + PM_SYS_PUSH16(6, SYSCR) +#endif + +#ifdef EBIU_AMGCTL + PM_SYS_PUSH16(7, EBIU_AMGCTL) + PM_SYS_PUSH(8, EBIU_AMBCTL0) + PM_SYS_PUSH(9, EBIU_AMBCTL1) +#endif +#ifdef EBIU_FCTL + PM_SYS_PUSH(10, EBIU_MBSCTL) + PM_SYS_PUSH(11, EBIU_MODE) + PM_SYS_PUSH(12, EBIU_FCTL) + PM_PUSH_SYNC(12) +#else + PM_PUSH_SYNC(9) +#endif + .endm + + + .macro bfin_sys_mmr_restore +/* Restore System MMRs */ + FP.H = hi(SYSMMR_BASE); + FP.L = lo(SYSMMR_BASE); + +#ifdef EBIU_FCTL + PM_POP_SYNC(12) + PM_SYS_POP(12, EBIU_FCTL) + PM_SYS_POP(11, EBIU_MODE) + PM_SYS_POP(10, EBIU_MBSCTL) +#else + PM_POP_SYNC(9) +#endif + +#ifdef EBIU_AMBCTL + PM_SYS_POP(9, EBIU_AMBCTL1) + PM_SYS_POP(8, EBIU_AMBCTL0) + PM_SYS_POP16(7, EBIU_AMGCTL) +#endif + +#ifdef SYSCR + PM_SYS_POP16(6, SYSCR) +#endif + +#ifdef PINT0_ASSIGN + PM_SYS_POP(5, PINT3_EDGE_SET) + PM_SYS_POP(4, PINT2_EDGE_SET) + PM_SYS_POP(3, PINT1_EDGE_SET) + PM_SYS_POP(2, PINT0_EDGE_SET) + PM_SYS_POP(1, PINT3_INVERT_SET) + PM_SYS_POP(0, PINT2_INVERT_SET) + PM_POP_SYNC(13) + PM_SYS_POP(13, PINT1_INVERT_SET) + PM_SYS_POP(12, PINT0_INVERT_SET) + PM_SYS_POP(11, PINT3_ASSIGN) + PM_SYS_POP(10, PINT2_ASSIGN) + PM_SYS_POP(9, PINT1_ASSIGN) + PM_SYS_POP(8, PINT0_ASSIGN) + PM_SYS_POP(7, PINT3_MASK_SET) + PM_SYS_POP(6, PINT2_MASK_SET) + PM_SYS_POP(5, PINT1_MASK_SET) + PM_SYS_POP(4, PINT0_MASK_SET) +#endif + +#ifdef SIC_IWR2 + PM_SYS_POP(3, SIC_IWR2) +#endif +#ifdef SIC_IWR1 + PM_SYS_POP(2, SIC_IWR1) +#endif +#ifdef SIC_IWR0 + PM_SYS_POP(1, SIC_IWR0) +#endif +#ifdef SIC_IWR + PM_SYS_POP(1, SIC_IWR) +#endif + +#ifdef SIC_IAR11 + PM_SYS_POP(0, SIC_IAR11) +#endif + PM_POP_SYNC(13) +#ifdef SIC_IAR8 + PM_SYS_POP(13, SIC_IAR10) + PM_SYS_POP(12, SIC_IAR9) + PM_SYS_POP(11, SIC_IAR8) +#endif +#ifdef SIC_IAR7 + PM_SYS_POP(10, SIC_IAR7) +#endif +#ifdef SIC_IAR6 + PM_SYS_POP(9, SIC_IAR6) + PM_SYS_POP(8, SIC_IAR5) + PM_SYS_POP(7, SIC_IAR4) +#endif +#ifdef SIC_IAR3 + PM_SYS_POP(6, SIC_IAR3) +#endif +#ifdef SIC_IAR0 + PM_SYS_POP(5, SIC_IAR2) + PM_SYS_POP(4, SIC_IAR1) + PM_SYS_POP(3, SIC_IAR0) +#endif +#ifdef SIC_IMASK0 +# ifdef SIC_IMASK2 + PM_SYS_POP(2, SIC_IMASK2) +# endif + PM_SYS_POP(1, SIC_IMASK1) + PM_SYS_POP(0, SIC_IMASK0) +#else +# ifdef SIC_IMASK + PM_SYS_POP(0, SIC_IMASK) +# endif +#endif + .endm + + .macro bfin_core_mmr_save + /* Save Core MMRs */ + I0.H = hi(COREMMR_BASE); + I0.L = lo(COREMMR_BASE); + I1 = I0; + I2 = I0; + I3 = I0; + B0 = I0; + B1 = I0; + B2 = I0; + B3 = I0; + I1.L = lo(DCPLB_ADDR0); + I2.L = lo(DCPLB_DATA0); + I3.L = lo(ICPLB_ADDR0); + B0.L = lo(ICPLB_DATA0); + B1.L = lo(EVT2); + B2.L = lo(IMASK); + B3.L = lo(TCNTL); + + /* Event Vectors */ + FP = B1; + PM_PUSH(0, EVT2) + PM_PUSH(1, EVT3) + FP += 4; /* EVT4 */ + PM_PUSH(2, EVT5) + PM_PUSH(3, EVT6) + PM_PUSH(4, EVT7) + PM_PUSH(5, EVT8) + PM_PUSH_SYNC(5) + + PM_PUSH(0, EVT9) + PM_PUSH(1, EVT10) + PM_PUSH(2, EVT11) + PM_PUSH(3, EVT12) + PM_PUSH(4, EVT13) + PM_PUSH(5, EVT14) + PM_PUSH(6, EVT15) + + /* CEC */ + FP = B2; + PM_PUSH(7, IMASK) + FP += 4; /* IPEND */ + PM_PUSH(8, ILAT) + PM_PUSH(9, IPRIO) + + /* Core Timer */ + FP = B3; + PM_PUSH(10, TCNTL) + PM_PUSH(11, TPERIOD) + PM_PUSH(12, TSCALE) + PM_PUSH(13, TCOUNT) + PM_PUSH_SYNC(13) + + /* Misc non-contiguous registers */ + FP = I0; + PM_CORE_PUSH(0, DMEM_CONTROL); + PM_CORE_PUSH(1, IMEM_CONTROL); + PM_CORE_PUSH(2, TBUFCTL); + PM_PUSH_SYNC(2) + + /* DCPLB Addr */ + FP = I1; + PM_PUSH(0, DCPLB_ADDR0) + PM_PUSH(1, DCPLB_ADDR1) + PM_PUSH(2, DCPLB_ADDR2) + PM_PUSH(3, DCPLB_ADDR3) + PM_PUSH(4, DCPLB_ADDR4) + PM_PUSH(5, DCPLB_ADDR5) + PM_PUSH(6, DCPLB_ADDR6) + PM_PUSH(7, DCPLB_ADDR7) + PM_PUSH(8, DCPLB_ADDR8) + PM_PUSH(9, DCPLB_ADDR9) + PM_PUSH(10, DCPLB_ADDR10) + PM_PUSH(11, DCPLB_ADDR11) + PM_PUSH(12, DCPLB_ADDR12) + PM_PUSH(13, DCPLB_ADDR13) + PM_PUSH_SYNC(13) + PM_PUSH(0, DCPLB_ADDR14) + PM_PUSH(1, DCPLB_ADDR15) + + /* DCPLB Data */ + FP = I2; + PM_PUSH(2, DCPLB_DATA0) + PM_PUSH(3, DCPLB_DATA1) + PM_PUSH(4, DCPLB_DATA2) + PM_PUSH(5, DCPLB_DATA3) + PM_PUSH(6, DCPLB_DATA4) + PM_PUSH(7, DCPLB_DATA5) + PM_PUSH(8, DCPLB_DATA6) + PM_PUSH(9, DCPLB_DATA7) + PM_PUSH(10, DCPLB_DATA8) + PM_PUSH(11, DCPLB_DATA9) + PM_PUSH(12, DCPLB_DATA10) + PM_PUSH(13, DCPLB_DATA11) + PM_PUSH_SYNC(13) + PM_PUSH(0, DCPLB_DATA12) + PM_PUSH(1, DCPLB_DATA13) + PM_PUSH(2, DCPLB_DATA14) + PM_PUSH(3, DCPLB_DATA15) + + /* ICPLB Addr */ + FP = I3; + PM_PUSH(4, ICPLB_ADDR0) + PM_PUSH(5, ICPLB_ADDR1) + PM_PUSH(6, ICPLB_ADDR2) + PM_PUSH(7, ICPLB_ADDR3) + PM_PUSH(8, ICPLB_ADDR4) + PM_PUSH(9, ICPLB_ADDR5) + PM_PUSH(10, ICPLB_ADDR6) + PM_PUSH(11, ICPLB_ADDR7) + PM_PUSH(12, ICPLB_ADDR8) + PM_PUSH(13, ICPLB_ADDR9) + PM_PUSH_SYNC(13) + PM_PUSH(0, ICPLB_ADDR10) + PM_PUSH(1, ICPLB_ADDR11) + PM_PUSH(2, ICPLB_ADDR12) + PM_PUSH(3, ICPLB_ADDR13) + PM_PUSH(4, ICPLB_ADDR14) + PM_PUSH(5, ICPLB_ADDR15) + + /* ICPLB Data */ + FP = B0; + PM_PUSH(6, ICPLB_DATA0) + PM_PUSH(7, ICPLB_DATA1) + PM_PUSH(8, ICPLB_DATA2) + PM_PUSH(9, ICPLB_DATA3) + PM_PUSH(10, ICPLB_DATA4) + PM_PUSH(11, ICPLB_DATA5) + PM_PUSH(12, ICPLB_DATA6) + PM_PUSH(13, ICPLB_DATA7) + PM_PUSH_SYNC(13) + PM_PUSH(0, ICPLB_DATA8) + PM_PUSH(1, ICPLB_DATA9) + PM_PUSH(2, ICPLB_DATA10) + PM_PUSH(3, ICPLB_DATA11) + PM_PUSH(4, ICPLB_DATA12) + PM_PUSH(5, ICPLB_DATA13) + PM_PUSH(6, ICPLB_DATA14) + PM_PUSH(7, ICPLB_DATA15) + PM_PUSH_SYNC(7) + .endm + + .macro bfin_core_mmr_restore + /* Restore Core MMRs */ + I0.H = hi(COREMMR_BASE); + I0.L = lo(COREMMR_BASE); + I1 = I0; + I2 = I0; + I3 = I0; + B0 = I0; + B1 = I0; + B2 = I0; + B3 = I0; + I1.L = lo(DCPLB_ADDR15); + I2.L = lo(DCPLB_DATA15); + I3.L = lo(ICPLB_ADDR15); + B0.L = lo(ICPLB_DATA15); + B1.L = lo(EVT15); + B2.L = lo(IPRIO); + B3.L = lo(TCOUNT); + + /* ICPLB Data */ + FP = B0; + PM_POP_SYNC(7) + PM_POP(7, ICPLB_DATA15) + PM_POP(6, ICPLB_DATA14) + PM_POP(5, ICPLB_DATA13) + PM_POP(4, ICPLB_DATA12) + PM_POP(3, ICPLB_DATA11) + PM_POP(2, ICPLB_DATA10) + PM_POP(1, ICPLB_DATA9) + PM_POP(0, ICPLB_DATA8) + PM_POP_SYNC(13) + PM_POP(13, ICPLB_DATA7) + PM_POP(12, ICPLB_DATA6) + PM_POP(11, ICPLB_DATA5) + PM_POP(10, ICPLB_DATA4) + PM_POP(9, ICPLB_DATA3) + PM_POP(8, ICPLB_DATA2) + PM_POP(7, ICPLB_DATA1) + PM_POP(6, ICPLB_DATA0) + + /* ICPLB Addr */ + FP = I3; + PM_POP(5, ICPLB_ADDR15) + PM_POP(4, ICPLB_ADDR14) + PM_POP(3, ICPLB_ADDR13) + PM_POP(2, ICPLB_ADDR12) + PM_POP(1, ICPLB_ADDR11) + PM_POP(0, ICPLB_ADDR10) + PM_POP_SYNC(13) + PM_POP(13, ICPLB_ADDR9) + PM_POP(12, ICPLB_ADDR8) + PM_POP(11, ICPLB_ADDR7) + PM_POP(10, ICPLB_ADDR6) + PM_POP(9, ICPLB_ADDR5) + PM_POP(8, ICPLB_ADDR4) + PM_POP(7, ICPLB_ADDR3) + PM_POP(6, ICPLB_ADDR2) + PM_POP(5, ICPLB_ADDR1) + PM_POP(4, ICPLB_ADDR0) + + /* DCPLB Data */ + FP = I2; + PM_POP(3, DCPLB_DATA15) + PM_POP(2, DCPLB_DATA14) + PM_POP(1, DCPLB_DATA13) + PM_POP(0, DCPLB_DATA12) + PM_POP_SYNC(13) + PM_POP(13, DCPLB_DATA11) + PM_POP(12, DCPLB_DATA10) + PM_POP(11, DCPLB_DATA9) + PM_POP(10, DCPLB_DATA8) + PM_POP(9, DCPLB_DATA7) + PM_POP(8, DCPLB_DATA6) + PM_POP(7, DCPLB_DATA5) + PM_POP(6, DCPLB_DATA4) + PM_POP(5, DCPLB_DATA3) + PM_POP(4, DCPLB_DATA2) + PM_POP(3, DCPLB_DATA1) + PM_POP(2, DCPLB_DATA0) + + /* DCPLB Addr */ + FP = I1; + PM_POP(1, DCPLB_ADDR15) + PM_POP(0, DCPLB_ADDR14) + PM_POP_SYNC(13) + PM_POP(13, DCPLB_ADDR13) + PM_POP(12, DCPLB_ADDR12) + PM_POP(11, DCPLB_ADDR11) + PM_POP(10, DCPLB_ADDR10) + PM_POP(9, DCPLB_ADDR9) + PM_POP(8, DCPLB_ADDR8) + PM_POP(7, DCPLB_ADDR7) + PM_POP(6, DCPLB_ADDR6) + PM_POP(5, DCPLB_ADDR5) + PM_POP(4, DCPLB_ADDR4) + PM_POP(3, DCPLB_ADDR3) + PM_POP(2, DCPLB_ADDR2) + PM_POP(1, DCPLB_ADDR1) + PM_POP(0, DCPLB_ADDR0) + + + /* Misc non-contiguous registers */ + + /* icache & dcache will enable later + drop IMEM_CONTROL, DMEM_CONTROL pop + */ + FP = I0; + PM_POP_SYNC(2) + PM_CORE_POP(2, TBUFCTL) + PM_CORE_POP(1, IMEM_CONTROL) + PM_CORE_POP(0, DMEM_CONTROL) + + /* Core Timer */ + FP = B3; + R0 = 0x1; + [FP - 0xC] = R0; + + PM_POP_SYNC(13) + FP = B3; + PM_POP(13, TCOUNT) + PM_POP(12, TSCALE) + PM_POP(11, TPERIOD) + PM_POP(10, TCNTL) + + /* CEC */ + FP = B2; + PM_POP(9, IPRIO) + PM_POP(8, ILAT) + FP += -4; /* IPEND */ + PM_POP(7, IMASK) + + /* Event Vectors */ + FP = B1; + PM_POP(6, EVT15) + PM_POP(5, EVT14) + PM_POP(4, EVT13) + PM_POP(3, EVT12) + PM_POP(2, EVT11) + PM_POP(1, EVT10) + PM_POP(0, EVT9) + PM_POP_SYNC(5) + PM_POP(5, EVT8) + PM_POP(4, EVT7) + PM_POP(3, EVT6) + PM_POP(2, EVT5) + FP += -4; /* EVT4 */ + PM_POP(1, EVT3) + PM_POP(0, EVT2) + .endm +#endif + #include <mach/pll.h> /* PLL_CTL Masks */ @@ -98,6 +743,16 @@ #define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */ #endif +#ifdef CONFIG_BF60x +#define PA15WE 0x00000001 /* Allow Wake-Up from PA15 */ +#define PB15WE 0x00000002 /* Allow Wake-Up from PB15 */ +#define PC15WE 0x00000004 /* Allow Wake-Up from PC15 */ +#define PD06WE 0x00000008 /* Allow Wake-Up from PD06(ETH0_PHYINT) */ +#define PE12WE 0x00000010 /* Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON) */ +#define PG04WE 0x00000020 /* Allow Wake-Up from PG04(CAN0_RX) */ +#define PG13WE 0x00000040 /* Allow Wake-Up from PG13 */ +#define USBWE 0x00000080 /* Allow Wake-Up from (USB) */ +#else #define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */ #define CANWE 0x0200 /* Enable CAN Wakeup From Hibernate */ #define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */ @@ -113,6 +768,7 @@ #else #define USBWE 0x0800 /* Enable USB Wakeup From Hibernate */ #endif +#endif #ifndef __ASSEMBLY__ diff --git a/arch/blackfin/include/asm/fixed_code.h b/arch/blackfin/include/asm/fixed_code.h index 73fe53e7fd24..5395088b2d0e 100644 --- a/arch/blackfin/include/asm/fixed_code.h +++ b/arch/blackfin/include/asm/fixed_code.h @@ -29,24 +29,28 @@ extern void sigreturn_stub(void); #endif #endif -#define FIXED_CODE_START 0x400 +#ifndef CONFIG_PHY_RAM_BASE_ADDRESS +#define CONFIG_PHY_RAM_BASE_ADDRESS 0x0 +#endif + +#define FIXED_CODE_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) -#define SIGRETURN_STUB 0x400 +#define SIGRETURN_STUB (CONFIG_PHY_RAM_BASE_ADDRESS + 0x400) -#define ATOMIC_SEQS_START 0x410 +#define ATOMIC_SEQS_START (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) -#define ATOMIC_XCHG32 0x410 -#define ATOMIC_CAS32 0x420 -#define ATOMIC_ADD32 0x430 -#define ATOMIC_SUB32 0x440 -#define ATOMIC_IOR32 0x450 -#define ATOMIC_AND32 0x460 -#define ATOMIC_XOR32 0x470 +#define ATOMIC_XCHG32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x410) +#define ATOMIC_CAS32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x420) +#define ATOMIC_ADD32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x430) +#define ATOMIC_SUB32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x440) +#define ATOMIC_IOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x450) +#define ATOMIC_AND32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x460) +#define ATOMIC_XOR32 (CONFIG_PHY_RAM_BASE_ADDRESS + 0x470) -#define ATOMIC_SEQS_END 0x480 +#define ATOMIC_SEQS_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) -#define SAFE_USER_INSTRUCTION 0x480 +#define SAFE_USER_INSTRUCTION (CONFIG_PHY_RAM_BASE_ADDRESS + 0x480) -#define FIXED_CODE_END 0x490 +#define FIXED_CODE_END (CONFIG_PHY_RAM_BASE_ADDRESS + 0x490) #endif diff --git a/arch/blackfin/include/asm/gpio.h b/arch/blackfin/include/asm/gpio.h index 12d3571b5232..3d84d96f7c2c 100644 --- a/arch/blackfin/include/asm/gpio.h +++ b/arch/blackfin/include/asm/gpio.h @@ -26,6 +26,7 @@ #ifndef __ASSEMBLY__ #include <linux/compiler.h> +#include <linux/gpio.h> /*********************************************************** * @@ -244,6 +245,49 @@ static inline int gpio_set_debounce(unsigned gpio, unsigned debounce) return -EINVAL; } +static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label) +{ + int err; + + err = bfin_gpio_request(gpio, label); + if (err) + return err; + + if (flags & GPIOF_DIR_IN) + err = bfin_gpio_direction_input(gpio); + else + err = bfin_gpio_direction_output(gpio, + (flags & GPIOF_INIT_HIGH) ? 1 : 0); + + if (err) + bfin_gpio_free(gpio); + + return err; +} + +static inline int gpio_request_array(const struct gpio *array, size_t num) +{ + int i, err; + + for (i = 0; i < num; i++, array++) { + err = gpio_request_one(array->gpio, array->flags, array->label); + if (err) + goto err_free; + } + return 0; + +err_free: + while (i--) + bfin_gpio_free((--array)->gpio); + return err; +} + +static inline void gpio_free_array(const struct gpio *array, size_t num) +{ + while (num--) + bfin_gpio_free((array++)->gpio); +} + static inline int __gpio_get_value(unsigned gpio) { return bfin_gpio_get_value(gpio); diff --git a/arch/blackfin/include/asm/gptimers.h b/arch/blackfin/include/asm/gptimers.h index 38bddcb190c8..381e3d621a4c 100644 --- a/arch/blackfin/include/asm/gptimers.h +++ b/arch/blackfin/include/asm/gptimers.h @@ -44,6 +44,13 @@ # define TIMER_GROUP2 1 #endif /* + * BF609: 8 timers: + */ +#if defined(CONFIG_BF60x) +# define MAX_BLACKFIN_GPTIMERS 8 +# define TIMER0_GROUP_REG TIMER_RUN +#endif +/* * All others: 3 timers: */ #define TIMER_GROUP1 0 @@ -104,6 +111,72 @@ # define FS2_TIMER_BIT TIMER1bit #endif +#ifdef CONFIG_BF60x +/* + * Timer Configuration Register Bits + */ +#define TIMER_EMU_RUN 0x8000 +#define TIMER_BPER_EN 0x4000 +#define TIMER_BWID_EN 0x2000 +#define TIMER_BDLY_EN 0x1000 +#define TIMER_OUT_DIS 0x0800 +#define TIMER_TIN_SEL 0x0400 +#define TIMER_CLK_SEL 0x0300 +#define TIMER_CLK_SCLK 0x0000 +#define TIMER_CLK_ALT_CLK0 0x0100 +#define TIMER_CLK_ALT_CLK1 0x0300 +#define TIMER_PULSE_HI 0x0080 +#define TIMER_SLAVE_TRIG 0x0040 +#define TIMER_IRQ_MODE 0x0030 +#define TIMER_IRQ_ACT_EDGE 0x0000 +#define TIMER_IRQ_DLY 0x0010 +#define TIMER_IRQ_WID_DLY 0x0020 +#define TIMER_IRQ_PER 0x0030 +#define TIMER_MODE 0x000f +#define TIMER_MODE_WDOG_P 0x0008 +#define TIMER_MODE_WDOG_W 0x0009 +#define TIMER_MODE_PWM_CONT 0x000c +#define TIMER_MODE_PWM 0x000d +#define TIMER_MODE_WDTH 0x000a +#define TIMER_MODE_WDTH_D 0x000b +#define TIMER_MODE_EXT_CLK 0x000e +#define TIMER_MODE_PININT 0x000f + +/* + * Timer Status Register Bits + */ +#define TIMER_STATUS_TIMIL0 0x0001 +#define TIMER_STATUS_TIMIL1 0x0002 +#define TIMER_STATUS_TIMIL2 0x0004 +#define TIMER_STATUS_TIMIL3 0x0008 +#define TIMER_STATUS_TIMIL4 0x0010 +#define TIMER_STATUS_TIMIL5 0x0020 +#define TIMER_STATUS_TIMIL6 0x0040 +#define TIMER_STATUS_TIMIL7 0x0080 + +#define TIMER_STATUS_TOVF0 0x0001 /* timer 0 overflow error */ +#define TIMER_STATUS_TOVF1 0x0002 +#define TIMER_STATUS_TOVF2 0x0004 +#define TIMER_STATUS_TOVF3 0x0008 +#define TIMER_STATUS_TOVF4 0x0010 +#define TIMER_STATUS_TOVF5 0x0020 +#define TIMER_STATUS_TOVF6 0x0040 +#define TIMER_STATUS_TOVF7 0x0080 + +/* + * Timer Slave Enable Status : write 1 to clear + */ +#define TIMER_STATUS_TRUN0 0x0001 +#define TIMER_STATUS_TRUN1 0x0002 +#define TIMER_STATUS_TRUN2 0x0004 +#define TIMER_STATUS_TRUN3 0x0008 +#define TIMER_STATUS_TRUN4 0x0010 +#define TIMER_STATUS_TRUN5 0x0020 +#define TIMER_STATUS_TRUN6 0x0040 +#define TIMER_STATUS_TRUN7 0x0080 + +#else + /* * Timer Configuration Register Bits */ @@ -170,12 +243,18 @@ #define TIMER_STATUS_TRUN10 0x4000 #define TIMER_STATUS_TRUN11 0x8000 +#endif + /* The actual gptimer API */ void set_gptimer_pwidth(unsigned int timer_id, uint32_t width); uint32_t get_gptimer_pwidth(unsigned int timer_id); void set_gptimer_period(unsigned int timer_id, uint32_t period); uint32_t get_gptimer_period(unsigned int timer_id); +#ifdef CONFIG_BF60x +void set_gptimer_delay(unsigned int timer_id, uint32_t delay); +uint32_t get_gptimer_delay(unsigned int timer_id); +#endif uint32_t get_gptimer_count(unsigned int timer_id); int get_gptimer_intr(unsigned int timer_id); void clear_gptimer_intr(unsigned int timer_id); @@ -217,16 +296,41 @@ struct bfin_gptimer_regs { u32 counter; u32 period; u32 width; +#ifdef CONFIG_BF60x + u32 delay; +#endif }; /* * bfin group timer registers layout */ +#ifndef CONFIG_BF60x struct bfin_gptimer_group_regs { __BFP(enable); __BFP(disable); u32 status; }; +#else +struct bfin_gptimer_group_regs { + __BFP(run); + __BFP(enable); + __BFP(disable); + __BFP(stop_cfg); + __BFP(stop_cfg_set); + __BFP(stop_cfg_clr); + __BFP(data_imsk); + __BFP(stat_imsk); + __BFP(tr_msk); + __BFP(tr_ie); + __BFP(data_ilat); + __BFP(stat_ilat); + __BFP(err_status); + __BFP(bcast_per); + __BFP(bcast_wid); + __BFP(bcast_dly); + +}; +#endif #undef __BFP diff --git a/arch/blackfin/include/asm/irqflags.h b/arch/blackfin/include/asm/irqflags.h index 43eb4749de3d..07aff230a812 100644 --- a/arch/blackfin/include/asm/irqflags.h +++ b/arch/blackfin/include/asm/irqflags.h @@ -67,7 +67,11 @@ static inline notrace unsigned long __hard_local_irq_save(void) static inline notrace int hard_irqs_disabled_flags(unsigned long flags) { +#ifdef CONFIG_BF60x + return (flags & IMASK_IVG11) == 0; +#else return (flags & ~0x3f) == 0; +#endif } static inline notrace int hard_irqs_disabled(void) @@ -224,7 +228,7 @@ static inline notrace void hard_local_irq_restore(unsigned long flags) * Direct interface to linux/irqflags.h. */ #define arch_local_save_flags() hard_local_save_flags() -#define arch_local_irq_save(flags) __hard_local_irq_save() +#define arch_local_irq_save() __hard_local_irq_save() #define arch_local_irq_restore(flags) __hard_local_irq_restore(flags) #define arch_local_irq_enable() __hard_local_irq_enable() #define arch_local_irq_disable() __hard_local_irq_disable() diff --git a/arch/blackfin/include/asm/page.h b/arch/blackfin/include/asm/page.h index 7202404966f6..b93474d5be75 100644 --- a/arch/blackfin/include/asm/page.h +++ b/arch/blackfin/include/asm/page.h @@ -7,14 +7,15 @@ #ifndef _BLACKFIN_PAGE_H #define _BLACKFIN_PAGE_H -#include <asm-generic/page.h> -#define MAP_NR(addr) (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT) +#define ARCH_PFN_OFFSET (CONFIG_PHY_RAM_BASE_ADDRESS >> PAGE_SHIFT) +#define MAP_NR(addr) ((unsigned long)(addr) >> PAGE_SHIFT) #define VM_DATA_DEFAULT_FLAGS \ (VM_READ | VM_WRITE | \ ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0 ) | \ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) +#include <asm-generic/page.h> #include <asm-generic/memory_model.h> #include <asm-generic/getorder.h> diff --git a/arch/blackfin/include/asm/pda.h b/arch/blackfin/include/asm/pda.h index 28c2498c9c98..68d6f6618f2a 100644 --- a/arch/blackfin/include/asm/pda.h +++ b/arch/blackfin/include/asm/pda.h @@ -13,7 +13,9 @@ #ifndef __ASSEMBLY__ struct blackfin_pda { /* Per-processor Data Area */ +#ifdef CONFIG_SMP struct blackfin_pda *next; +#endif unsigned long syscfg; #ifdef CONFIG_SMP diff --git a/arch/blackfin/include/asm/pm.h b/arch/blackfin/include/asm/pm.h new file mode 100644 index 000000000000..f72239bf3638 --- /dev/null +++ b/arch/blackfin/include/asm/pm.h @@ -0,0 +1,31 @@ +/* + * Blackfin bf609 power management + * + * Copyright 2011 Analog Devices Inc. + * + * Licensed under the GPL-2 + */ + +#ifndef __PM_H__ +#define __PM_H__ + +#include <linux/suspend.h> + +struct bfin_cpu_pm_fns { + void (*save)(unsigned long *); + void (*restore)(unsigned long *); + int (*valid)(suspend_state_t state); + void (*enter)(suspend_state_t state); + int (*prepare)(void); + void (*finish)(void); +}; + +extern struct bfin_cpu_pm_fns *bfin_cpu_pm; + +# ifdef CONFIG_BFIN_COREB +void bfin_coreb_start(void); +void bfin_coreb_stop(void); +void bfin_coreb_reset(void); +# endif + +#endif diff --git a/arch/blackfin/include/asm/processor.h b/arch/blackfin/include/asm/processor.h index 8af7772e84cc..4ef7cfe43ceb 100644 --- a/arch/blackfin/include/asm/processor.h +++ b/arch/blackfin/include/asm/processor.h @@ -75,8 +75,6 @@ static inline void release_thread(struct task_struct *dead_task) { } -#define prepare_to_copy(tsk) do { } while (0) - extern int kernel_thread(int (*fn) (void *), void *arg, unsigned long flags); /* diff --git a/arch/blackfin/include/asm/unistd.h b/arch/blackfin/include/asm/unistd.h index 75ec9df5318b..3287222cba34 100644 --- a/arch/blackfin/include/asm/unistd.h +++ b/arch/blackfin/include/asm/unistd.h @@ -11,7 +11,7 @@ */ #define __NR_restart_syscall 0 #define __NR_exit 1 -#define __NR_fork 2 + /* 2 __NR_fork not supported on nommu */ #define __NR_read 3 #define __NR_write 4 #define __NR_open 5 |