diff options
Diffstat (limited to 'arch/arm')
58 files changed, 440 insertions, 269 deletions
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 4c23a68a0917..7a6a58ef8aaf 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -106,6 +106,15 @@ ORIG_CFLAGS := $(KBUILD_CFLAGS) KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif +# -fstack-protector-strong triggers protection checks in this code, +# but it is being used too early to link to meaningful stack_chk logic. +nossp_flags := $(call cc-option, -fno-stack-protector) +CFLAGS_atags_to_fdt.o := $(nossp_flags) +CFLAGS_fdt.o := $(nossp_flags) +CFLAGS_fdt_ro.o := $(nossp_flags) +CFLAGS_fdt_rw.o := $(nossp_flags) +CFLAGS_fdt_wip.o := $(nossp_flags) + ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj) asflags-y := -DZIMAGE diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index f3db13d2d90e..0cc150b87b86 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -285,8 +285,10 @@ }; }; + +/include/ "tps65217.dtsi" + &tps { - compatible = "ti,tps65217"; /* * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only * mode") at poweroff. Most BeagleBone versions do not support RTC-only @@ -307,17 +309,12 @@ ti,pmic-shutdown-controller; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; regulator-name = "vdds_dpr"; regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -327,7 +324,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -337,25 +333,21 @@ }; ldo1_reg: regulator@3 { - reg = <3>; regulator-name = "vio,vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; regulator-name = "vdd_1v8"; regulator-always-on; }; ldo4_reg: regulator@6 { - reg = <6>; regulator-name = "vdd_3v3a"; regulator-always-on; }; diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi index fda457b07e15..857d9894103a 100644 --- a/arch/arm/boot/dts/am335x-chilisom.dtsi +++ b/arch/arm/boot/dts/am335x-chilisom.dtsi @@ -128,21 +128,16 @@ }; -&tps { - compatible = "ti,tps65217"; +/include/ "tps65217.dtsi" +&tps { regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; regulator-name = "vdds_dpr"; regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -152,7 +147,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -162,28 +156,24 @@ }; ldo1_reg: regulator@3 { - reg = <3>; regulator-name = "vio,vrtc,vdds"; regulator-boot-on; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; regulator-name = "vdd_3v3aux"; regulator-boot-on; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; regulator-name = "vdd_1v8"; regulator-boot-on; regulator-always-on; }; ldo4_reg: regulator@6 { - reg = <6>; regulator-name = "vdd_3v3d"; regulator-boot-on; regulator-always-on; diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts index 77559a1ded60..f313999c503e 100644 --- a/arch/arm/boot/dts/am335x-nano.dts +++ b/arch/arm/boot/dts/am335x-nano.dts @@ -375,15 +375,11 @@ wp-gpios = <&gpio3 18 0>; }; -&tps { - compatible = "ti,tps65217"; +#include "tps65217.dtsi" +&tps { regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* +1.5V voltage with ±4% tolerance */ regulator-min-microvolt = <1450000>; regulator-max-microvolt = <1550000>; @@ -392,7 +388,6 @@ }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.1V with ±4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <915000>; @@ -402,7 +397,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with ±4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <915000>; @@ -412,7 +406,6 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* +1.8V voltage with ±4% tolerance */ regulator-min-microvolt = <1750000>; regulator-max-microvolt = <1870000>; @@ -421,7 +414,6 @@ }; ldo2_reg: regulator@4 { - reg = <4>; /* +3.3V voltage with ±4% tolerance */ regulator-min-microvolt = <3175000>; regulator-max-microvolt = <3430000>; @@ -430,7 +422,6 @@ }; ldo3_reg: regulator@5 { - reg = <5>; /* +1.8V voltage with ±4% tolerance */ regulator-min-microvolt = <1750000>; regulator-max-microvolt = <1870000>; @@ -439,7 +430,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* +3.3V voltage with ±4% tolerance */ regulator-min-microvolt = <3175000>; regulator-max-microvolt = <3430000>; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts index 471a3a70ea1f..8867aaaec54d 100644 --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -420,9 +420,9 @@ vin-supply = <&vbat>; }; -&tps { - compatible = "ti,tps65217"; +/include/ "tps65217.dtsi" +&tps { backlight { isel = <1>; /* ISET1 */ fdim = <200>; /* TPS65217_BL_FDIM_200HZ */ @@ -430,17 +430,12 @@ }; regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* VDD_1V8 system supply */ regulator-always-on; }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -450,7 +445,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -460,21 +454,18 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* VRTC 1.8V always-on supply */ regulator-name = "vrtc,vdds"; regulator-always-on; }; ldo2_reg: regulator@4 { - reg = <4>; /* 3.3V rail */ regulator-name = "vdd_3v3aux"; regulator-always-on; }; ldo3_reg: regulator@5 { - reg = <5>; /* VDD_3V3A 3.3V rail */ regulator-name = "vdd_3v3a"; regulator-min-microvolt = <3300000>; @@ -482,7 +473,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* VDD_3V3B 3.3V rail */ regulator-name = "vdd_3v3b"; regulator-always-on; diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts index 1b5b044fcd91..865de8500f1c 100644 --- a/arch/arm/boot/dts/am335x-shc.dts +++ b/arch/arm/boot/dts/am335x-shc.dts @@ -46,7 +46,7 @@ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; linux,code = <KEY_BACK>; debounce-interval = <1000>; - gpio-key,wakeup; + wakeup-source; }; front_button { @@ -54,7 +54,7 @@ gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; linux,code = <KEY_FRONT>; debounce-interval = <1000>; - gpio-key,wakeup; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts index d38edfa53bb9..3303c281697b 100644 --- a/arch/arm/boot/dts/am335x-sl50.dts +++ b/arch/arm/boot/dts/am335x-sl50.dts @@ -375,19 +375,16 @@ pinctrl-0 = <&uart4_pins>; }; +#include "tps65217.dtsi" + &tps { - compatible = "ti,tps65217"; ti,pmic-shutdown-controller; interrupt-parent = <&intc>; interrupts = <7>; /* NNMI */ regulators { - #address-cells = <1>; - #size-cells = <0>; - dcdc1_reg: regulator@0 { - reg = <0>; /* VDDS_DDR */ regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; @@ -395,7 +392,6 @@ }; dcdc2_reg: regulator@1 { - reg = <1>; /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ regulator-name = "vdd_mpu"; regulator-min-microvolt = <925000>; @@ -405,7 +401,6 @@ }; dcdc3_reg: regulator@2 { - reg = <2>; /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ regulator-name = "vdd_core"; regulator-min-microvolt = <925000>; @@ -415,7 +410,6 @@ }; ldo1_reg: regulator@3 { - reg = <3>; /* VRTC / VIO / VDDS*/ regulator-always-on; regulator-min-microvolt = <1800000>; @@ -423,7 +417,6 @@ }; ldo2_reg: regulator@4 { - reg = <4>; /* VDD_3V3AUX */ regulator-always-on; regulator-min-microvolt = <3300000>; @@ -431,7 +424,6 @@ }; ldo3_reg: regulator@5 { - reg = <5>; /* VDD_1V8 */ regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -439,7 +431,6 @@ }; ldo4_reg: regulator@6 { - reg = <6>; /* VDD_3V3A */ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 04885f9f959e..1fafaad516ba 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -439,6 +439,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index df955ba4dc62..92068fbf8b57 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -73,7 +73,7 @@ global_timer: timer@48240200 { compatible = "arm,cortex-a9-global-timer"; reg = <0x48240200 0x100>; - interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -81,7 +81,7 @@ local_timer: timer@48240600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x48240600 0x100>; - interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gic>; clocks = <&mpu_periphclk>; }; @@ -290,6 +290,7 @@ ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; mbox_wkupm3: wkup_m3 { + ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; }; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 64d43325bcbc..ecd09ab6d581 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -590,8 +590,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; - interrupt-parent = <&gpio3>; - interrupts = <22 0>; attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; @@ -599,7 +597,7 @@ * 0x264 represents the offset of padconf register of * gpio3_22 from am43xx_pinmux base. */ - interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>, + interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>, <&am43xx_pinmux 0x264>; interrupt-names = "tsc", "wakeup"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 746fd2b17958..d580e2b70f9a 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -491,7 +491,7 @@ pinctrl-0 = <&pixcir_ts_pins>; reg = <0x5c>; interrupt-parent = <&gpio1>; - interrupts = <17 0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 36c0fa6c362a..a0986c65be0c 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -173,6 +173,8 @@ sound0_master: simple-audio-card,codec { sound-dai = <&tlv320aic3104>; + assigned-clocks = <&clkoutmux2_clk_mux>; + assigned-clock-parents = <&sys_clk2_dclk_div>; clocks = <&clkout2_clk>; }; }; @@ -796,6 +798,8 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&mcasp3_pins_default>; pinctrl-1 = <&mcasp3_pins_sleep>; + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&sys_clkin2>; status = "okay"; op-mode = <0>; /* MCASP_IIS_MODE */ diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index c53882643ae9..1c06cb76da07 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -167,7 +167,7 @@ DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */ DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */ DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */ - DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLUP | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ + DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */ >; }; @@ -492,14 +492,14 @@ pinctrl-names = "default"; pinctrl-0 = <&qspi1_pins>; - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; spi_flash: spi_flash@0 { #address-cells = <1>; #size-cells = <1>; compatible = "spansion,m25p80", "jedec,spi-nor"; reg = <0>; /* CS0 */ - spi-max-frequency = <20000000>; + spi-max-frequency = <48000000>; partition@0 { label = "uboot"; @@ -545,7 +545,7 @@ ti,debounce-tol = /bits/ 16 <10>; ti,debounce-rep = /bits/ 16 <1>; - linux,wakeup; + wakeup-source; }; }; @@ -559,13 +559,13 @@ &cpsw_emac0 { phy_id = <&davinci_mdio>, <0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <0>; }; &cpsw_emac1 { phy_id = <&davinci_mdio>, <1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-txid"; dual_emac_res_vlan = <1>; }; @@ -588,7 +588,7 @@ }; &usb2 { - dr_mode = "peripheral"; + dr_mode = "host"; }; &mcasp3 { diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts index 77bb8e17401a..988e99632d49 100644 --- a/arch/arm/boot/dts/am57xx-sbc-am57x.dts +++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts @@ -25,8 +25,8 @@ &dra7_pmx_core { uart3_pins_default: uart3_pins_default { pinctrl-single,pins = < - DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */ - DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */ + DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */ + DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */ >; }; @@ -108,9 +108,9 @@ pinctrl-0 = <&i2c5_pins_default>; clock-frequency = <400000>; - eeprom_base: atmel@50 { + eeprom_base: atmel@54 { compatible = "atmel,24c08"; - reg = <0x50>; + reg = <0x54>; pagesize = <16>; }; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 13cf69a8d0fb..fb9e1bbf2338 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -152,6 +152,7 @@ nand-on-flash-bbt; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index 77ddff036409..e683856c507c 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -114,9 +114,15 @@ macb0: ethernet@f8008000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_macb0_default>; + pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioA>; + interrupts = <73 IRQ_TYPE_LEVEL_LOW>; + }; }; pdmic@f8018000 { @@ -300,6 +306,10 @@ bias-disable; }; + pinctrl_macb0_phy_irq: macb0_phy_irq { + pinmux = <PIN_PC9__GPIO>; + }; + pinctrl_pdmic_default: pdmic_default { pinmux = <PIN_PB26__PDMIC_DAT>, <PIN_PB27__PDMIC_CLK>; diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 131614f28e75..569026e8f96c 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -86,10 +86,12 @@ macb0: ethernet@f8020000 { phy-mode = "rmii"; status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy0: ethernet-phy@1 { interrupt-parent = <&pioE>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; reg = <1>; }; }; @@ -152,6 +154,10 @@ atmel,pins = <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; }; + pinctrl_macb0_phy_irq: macb0_phy_irq_0 { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 2d4a33100af6..4e98cda97403 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -160,8 +160,15 @@ }; macb0: ethernet@f8020000 { + pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>; phy-mode = "rmii"; status = "okay"; + + ethernet-phy@1 { + reg = <0x1>; + interrupt-parent = <&pioE>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + }; }; mmc1: mmc@fc000000 { @@ -193,6 +200,10 @@ pinctrl@fc06a000 { board { + pinctrl_macb0_phy_irq: macb0_phy_irq { + atmel,pins = + <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; pinctrl_mmc0_cd: mmc0_cd { atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index ca4ddf86817a..626c67d66626 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -215,7 +215,7 @@ }; panel: panel { - compatible = "qd,qd43003c0-40", "simple-panel"; + compatible = "qiaodian,qd43003c0-40", "simple-panel"; backlight = <&backlight>; power-supply = <&panel_reg>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 4f6ae921656f..f74d3db4846d 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -896,7 +896,6 @@ #size-cells = <1>; reg = <0x2100000 0x10000>; ranges = <0 0x2100000 0x10000>; - interrupt-parent = <&intc>; clocks = <&clks IMX6QDL_CLK_CAAM_MEM>, <&clks IMX6QDL_CLK_CAAM_ACLK>, <&clks IMX6QDL_CLK_CAAM_IPG>, diff --git a/arch/arm/boot/dts/kirkwood-ds112.dts b/arch/arm/boot/dts/kirkwood-ds112.dts index bf4143c6cb8f..b84af3da8c84 100644 --- a/arch/arm/boot/dts/kirkwood-ds112.dts +++ b/arch/arm/boot/dts/kirkwood-ds112.dts @@ -14,7 +14,7 @@ #include "kirkwood-synology.dtsi" / { - model = "Synology DS111"; + model = "Synology DS112"; compatible = "synology,ds111", "marvell,kirkwood"; memory { diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts index 09eed3cea0af..36eec7392ab4 100644 --- a/arch/arm/boot/dts/kirkwood-lswvl.dts +++ b/arch/arm/boot/dts/kirkwood-lswvl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WVL/VL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio0 45 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio0 46 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; @@ -185,38 +186,38 @@ led@1 { label = "lswvl:red:alarm"; - gpios = <&gpio0 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; led@2 { label = "lswvl:red:func"; - gpios = <&gpio0 37 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; led@3 { label = "lswvl:amber:info"; - gpios = <&gpio0 38 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; led@4 { label = "lswvl:blue:func"; - gpios = <&gpio0 39 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; led@5 { label = "lswvl:blue:power"; - gpios = <&gpio0 40 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "keep"; }; led@6 { label = "lswvl:red:hdderr0"; - gpios = <&gpio0 34 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswvl:red:hdderr1"; - gpios = <&gpio0 35 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; }; }; @@ -233,7 +234,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; restart_poweroff { diff --git a/arch/arm/boot/dts/kirkwood-lswxl.dts b/arch/arm/boot/dts/kirkwood-lswxl.dts index f5db16a08597..b13ec20a7088 100644 --- a/arch/arm/boot/dts/kirkwood-lswxl.dts +++ b/arch/arm/boot/dts/kirkwood-lswxl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WXL/WSXL * - * Copyright (C) 2015, rogershimizu@gmail.com + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -156,21 +157,21 @@ button@1 { label = "Function Button"; linux,code = <KEY_OPTION>; - gpios = <&gpio1 41 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio1 42 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio1 43 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -185,12 +186,12 @@ led@1 { label = "lswxl:blue:func"; - gpios = <&gpio1 36 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; led@2 { label = "lswxl:red:alarm"; - gpios = <&gpio1 49 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; led@3 { @@ -200,23 +201,23 @@ led@4 { label = "lswxl:blue:power"; - gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; led@5 { label = "lswxl:red:func"; - gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; }; led@6 { label = "lswxl:red:hdderr0"; - gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; led@7 { label = "lswxl:red:hdderr1"; - gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; }; @@ -225,15 +226,15 @@ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; - gpios = <&gpio0 47 GPIO_ACTIVE_LOW - &gpio0 48 GPIO_ACTIVE_LOW>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW + &gpio1 15 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 3 1500 2 3250 1 5000 0>; - alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -256,7 +257,7 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>; + gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; hdd_power0: regulator@2 { compatible = "regulator-fixed"; diff --git a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts index 1db6f2c506cc..8082d64266a3 100644 --- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts @@ -131,6 +131,7 @@ chip-delay = <40>; status = "okay"; partitions { + compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi index 7fed0bd4f3de..00805322367e 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi +++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi @@ -112,14 +112,6 @@ clock-frequency = <400000>; }; -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; -}; - /* * Only found on the wireless SOM. For the SOM without wireless, the pins for * MMC3 can be routed with jumpers to the second MMC slot on the devkit and @@ -143,6 +135,7 @@ interrupt-parent = <&gpio5>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; /* gpio 152 */ ref-clock-frequency = <26000000>; + tcxo-clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi index 888412c63f97..902657d6713b 100644 --- a/arch/arm/boot/dts/omap5-board-common.dtsi +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -130,6 +130,16 @@ }; }; +&gpio8 { + /* TI trees use GPIO instead of msecure, see also muxing */ + p234 { + gpio-hog; + gpios = <10 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "gpio8_234/msecure"; + }; +}; + &omap5_pmx_core { pinctrl-names = "default"; pinctrl-0 = < @@ -213,6 +223,13 @@ >; }; + /* TI trees use GPIO mode; msecure mode does not work reliably? */ + palmas_msecure_pins: palmas_msecure_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x180, PIN_OUTPUT | MUX_MODE6) /* gpio8_234 */ + >; + }; + usbhost_pins: pinmux_usbhost_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x0c4, PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ @@ -278,6 +295,12 @@ &usbhost_wkup_pins >; + palmas_sys_nirq_pins: pinmux_palmas_sys_nirq_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x068, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq1 */ + >; + }; + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { pinctrl-single,pins = < OMAP5_IOPAD(0x05a, PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ @@ -345,6 +368,8 @@ interrupt-controller; #interrupt-cells = <2>; ti,system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&palmas_sys_nirq_pins &palmas_msecure_pins>; extcon_usb3: palmas_usb { compatible = "ti,palmas-usb-vid"; @@ -358,6 +383,14 @@ #clock-cells = <0>; }; + rtc { + compatible = "ti,palmas-rtc"; + interrupt-parent = <&palmas>; + interrupts = <8 IRQ_TYPE_NONE>; + ti,backup-battery-chargeable; + ti,backup-battery-charge-high-current; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts index 3daec912b4bf..aae8a7aceab7 100644 --- a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts @@ -1,7 +1,8 @@ /* * Device Tree file for Buffalo Linkstation LS-WTGL * - * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com> + * Copyright (C) 2015, 2016 + * Roger Shimizu <rogershimizu@gmail.com> * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual @@ -69,8 +70,6 @@ internal-regs { pinctrl: pinctrl@10000 { - pinctrl-0 = <&pmx_usb_power &pmx_power_hdd - &pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; pmx_led_power: pmx-leds { @@ -162,6 +161,7 @@ led@1 { label = "lswtgl:blue:power"; gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; led@2 { @@ -188,7 +188,7 @@ 3250 1 5000 0>; - alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; }; restart_poweroff { @@ -228,6 +228,37 @@ }; }; +&devbus_bootcs { + status = "okay"; + devbus,keep-config; + + flash@0 { + compatible = "jedec-flash"; + reg = <0 0x40000>; + bank-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + header@0 { + reg = <0 0x30000>; + read-only; + }; + + uboot@30000 { + reg = <0x30000 0xF000>; + read-only; + }; + + uboot_env@3F000 { + reg = <0x3F000 0x1000>; + }; + }; + }; +}; + &mdio { status = "okay"; diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h index 1afe24629d1f..b0c912feaa2f 100644 --- a/arch/arm/boot/dts/sama5d2-pinfunc.h +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -90,7 +90,7 @@ #define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2) #define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1) #define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2) -#define PIN_PA15 14 +#define PIN_PA15 15 #define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) #define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1) #define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1) diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index b8032bca4621..db1151c18466 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1342,7 +1342,7 @@ dbgu: serial@fc069000 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xfc069000 0x200>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>; + interrupts = <45 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&dbgu_clk>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index d0c743853318..27a333eb8987 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -127,22 +127,14 @@ }; mmcsd_default_mode: mmcsd_default { mmcsd_default_cfg1 { - /* MCCLK */ - pins = "GPIO8_B10"; - ste,output = <0>; - }; - mmcsd_default_cfg2 { - /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */ - pins = "GPIO10_C11", "GPIO15_A12", - "GPIO16_C13", "GPIO23_D15"; - ste,output = <1>; - }; - mmcsd_default_cfg3 { - /* MCCMD, MCDAT3-0, MCMSFBCLK */ - pins = "GPIO9_A10", "GPIO11_B11", - "GPIO12_A11", "GPIO13_C12", - "GPIO14_B12", "GPIO24_C15"; - ste,input = <1>; + /* + * MCCLK, MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 + * MCCMD, MCDAT3-0, MCMSFBCLK + */ + pins = "GPIO8_B10", "GPIO9_A10", "GPIO10_C11", "GPIO11_B11", + "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO15_A12", + "GPIO16_C13", "GPIO23_D15", "GPIO24_C15"; + ste,output = <2>; }; }; }; @@ -802,10 +794,21 @@ clock-names = "mclk", "apb_pclk"; interrupt-parent = <&vica>; interrupts = <22>; - max-frequency = <48000000>; + max-frequency = <400000>; bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; + full-pwr-cycle; + /* + * The STw4811 circuit used with the Nomadik strictly + * requires that all of these signal direction pins be + * routed and used for its 4-bit levelshifter. + */ + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-dir-cmd; + st,sig-pin-fbclk; pinctrl-names = "default"; pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>; vmmc-supply = <&vmmc_regulator>; diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi new file mode 100644 index 000000000000..a63272422d76 --- /dev/null +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65217.pdf + */ + +&tps { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + }; + }; +}; diff --git a/arch/arm/common/icst.c b/arch/arm/common/icst.c index 2dc6da70ae59..d7ed252708c5 100644 --- a/arch/arm/common/icst.c +++ b/arch/arm/common/icst.c @@ -16,7 +16,7 @@ */ #include <linux/module.h> #include <linux/kernel.h> - +#include <asm/div64.h> #include <asm/hardware/icst.h> /* @@ -29,7 +29,11 @@ EXPORT_SYMBOL(icst525_s2div); unsigned long icst_hz(const struct icst_params *p, struct icst_vco vco) { - return p->ref * 2 * (vco.v + 8) / ((vco.r + 2) * p->s2div[vco.s]); + u64 dividend = p->ref * 2 * (u64)(vco.v + 8); + u32 divisor = (vco.r + 2) * p->s2div[vco.s]; + + do_div(dividend, divisor); + return (unsigned long)dividend; } EXPORT_SYMBOL(icst_hz); @@ -58,6 +62,7 @@ icst_hz_to_vco(const struct icst_params *p, unsigned long freq) if (f > p->vco_min && f <= p->vco_max) break; + i++; } while (i < 8); if (i >= 8) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 314f6be2dca2..8e8b2ace9b7c 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -426,6 +426,7 @@ CONFIG_SUNXI_WATCHDOG=y CONFIG_IMX2_WDT=y CONFIG_TEGRA_WATCHDOG=m CONFIG_MESON_WATCHDOG=y +CONFIG_DW_WATCHDOG=y CONFIG_DIGICOLOR_WATCHDOG=y CONFIG_MFD_AS3711=y CONFIG_MFD_AS3722=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index c5e1943e5427..d18d6b42fcf5 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -50,6 +50,7 @@ CONFIG_SOC_AM33XX=y CONFIG_SOC_AM43XX=y CONFIG_SOC_DRA7XX=y CONFIG_ARM_THUMBEE=y +CONFIG_ARM_KERNMEM_PERMS=y CONFIG_ARM_ERRATA_411920=y CONFIG_ARM_ERRATA_430973=y CONFIG_SMP=y @@ -177,6 +178,7 @@ CONFIG_TI_CPTS=y CONFIG_AT803X_PHY=y CONFIG_SMSC_PHY=y CONFIG_USB_USBNET=m +CONFIG_USB_NET_SMSC75XX=m CONFIG_USB_NET_SMSC95XX=m CONFIG_USB_ALI_M5632=y CONFIG_USB_AN2720=y @@ -290,24 +292,23 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m -CONFIG_OMAP5_DSS_HDMI=y -CONFIG_OMAP2_DSS_SDI=y -CONFIG_OMAP2_DSS_DSI=y +CONFIG_FB_OMAP5_DSS_HDMI=y +CONFIG_FB_OMAP2_DSS_SDI=y +CONFIG_FB_OMAP2_DSS_DSI=y CONFIG_FB_OMAP2=m -CONFIG_DISPLAY_ENCODER_TFP410=m -CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m -CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m -CONFIG_DISPLAY_PANEL_DPI=m -CONFIG_DISPLAY_PANEL_DSI_CM=m -CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m -CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m -CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m -CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m -CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m -CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m +CONFIG_FB_OMAP2_ENCODER_TFP410=m +CONFIG_FB_OMAP2_ENCODER_TPD12S015=m +CONFIG_FB_OMAP2_CONNECTOR_DVI=m +CONFIG_FB_OMAP2_CONNECTOR_HDMI=m +CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m +CONFIG_FB_OMAP2_PANEL_DPI=m +CONFIG_FB_OMAP2_PANEL_DSI_CM=m +CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m +CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m +CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m +CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m +CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m +CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y @@ -354,6 +355,11 @@ CONFIG_USB_MUSB_DSPS=m CONFIG_USB_INVENTRA_DMA=y CONFIG_USB_TI_CPPI41_DMA=y CONFIG_USB_DWC3=m +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_TEST=m CONFIG_AM335X_PHY_USB=y CONFIG_USB_GADGET=m @@ -387,6 +393,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m CONFIG_LEDS_GPIO=m CONFIG_LEDS_PWM=m +CONFIG_LEDS_PCA963X=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m @@ -449,6 +456,8 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_INFO_SPLIT=y +CONFIG_DEBUG_INFO_DWARF4=y CONFIG_MAGIC_SYSRQ=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y diff --git a/arch/arm/crypto/aes-ce-glue.c b/arch/arm/crypto/aes-ce-glue.c index b445a5d56f43..89a3a3e592d6 100644 --- a/arch/arm/crypto/aes-ce-glue.c +++ b/arch/arm/crypto/aes-ce-glue.c @@ -364,7 +364,7 @@ static struct crypto_alg aes_algs[] = { { .cra_blkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ce_aes_setkey, .encrypt = ecb_encrypt, .decrypt = ecb_decrypt, @@ -441,7 +441,7 @@ static struct crypto_alg aes_algs[] = { { .cra_ablkcipher = { .min_keysize = AES_MIN_KEY_SIZE, .max_keysize = AES_MAX_KEY_SIZE, - .ivsize = AES_BLOCK_SIZE, + .ivsize = 0, .setkey = ablk_set_key, .encrypt = ablk_encrypt, .decrypt = ablk_decrypt, diff --git a/arch/arm/include/asm/arch_gicv3.h b/arch/arm/include/asm/arch_gicv3.h index 7da5503c0591..e08d15184056 100644 --- a/arch/arm/include/asm/arch_gicv3.h +++ b/arch/arm/include/asm/arch_gicv3.h @@ -117,6 +117,7 @@ static inline u32 gic_read_iar(void) u32 irqstat; asm volatile("mrc " __stringify(ICC_IAR1) : "=r" (irqstat)); + dsb(sy); return irqstat; } diff --git a/arch/arm/include/asm/xen/page-coherent.h b/arch/arm/include/asm/xen/page-coherent.h index 0375c8caa061..9408a994cc91 100644 --- a/arch/arm/include/asm/xen/page-coherent.h +++ b/arch/arm/include/asm/xen/page-coherent.h @@ -35,14 +35,21 @@ static inline void xen_dma_map_page(struct device *hwdev, struct page *page, dma_addr_t dev_addr, unsigned long offset, size_t size, enum dma_data_direction dir, struct dma_attrs *attrs) { - bool local = XEN_PFN_DOWN(dev_addr) == page_to_xen_pfn(page); + unsigned long page_pfn = page_to_xen_pfn(page); + unsigned long dev_pfn = XEN_PFN_DOWN(dev_addr); + unsigned long compound_pages = + (1<<compound_order(page)) * XEN_PFN_PER_PAGE; + bool local = (page_pfn <= dev_pfn) && + (dev_pfn - page_pfn < compound_pages); + /* - * Dom0 is mapped 1:1, while the Linux page can be spanned accross - * multiple Xen page, it's not possible to have a mix of local and - * foreign Xen page. So if the first xen_pfn == mfn the page is local - * otherwise it's a foreign page grant-mapped in dom0. If the page is - * local we can safely call the native dma_ops function, otherwise we - * call the xen specific function. + * Dom0 is mapped 1:1, while the Linux page can span across + * multiple Xen pages, it's not possible for it to contain a + * mix of local and foreign Xen pages. So if the first xen_pfn + * == mfn the page is local otherwise it's a foreign page + * grant-mapped in dom0. If the page is local we can safely + * call the native dma_ops function, otherwise we call the xen + * specific function. */ if (local) __generic_dma_ops(hwdev)->map_page(hwdev, page, offset, size, dir, attrs); diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index ede692ffa32e..5dd2528e9e45 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -417,6 +417,7 @@ #define __NR_userfaultfd (__NR_SYSCALL_BASE+388) #define __NR_membarrier (__NR_SYSCALL_BASE+389) #define __NR_mlock2 (__NR_SYSCALL_BASE+390) +#define __NR_copy_file_range (__NR_SYSCALL_BASE+391) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index ac368bb068d1..dfc7cd6851ad 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -400,6 +400,7 @@ CALL(sys_userfaultfd) CALL(sys_membarrier) CALL(sys_mlock2) + CALL(sys_copy_file_range) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kvm/mmio.c b/arch/arm/kvm/mmio.c index 7f33b2056ae6..0f6600f05137 100644 --- a/arch/arm/kvm/mmio.c +++ b/arch/arm/kvm/mmio.c @@ -206,7 +206,8 @@ int io_mem_abort(struct kvm_vcpu *vcpu, struct kvm_run *run, run->mmio.is_write = is_write; run->mmio.phys_addr = fault_ipa; run->mmio.len = len; - memcpy(run->mmio.data, data_buf, len); + if (is_write) + memcpy(run->mmio.data, data_buf, len); if (!ret) { /* We handled the access successfully in the kernel. */ diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 809827265fb3..bab814d2f37d 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -18,6 +18,7 @@ #include <asm/setup.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> #include "common.h" @@ -77,12 +78,31 @@ static const char *const n900_boards_compat[] __initconst = { NULL, }; +/* Set system_rev from atags */ +static void __init rx51_set_system_rev(const struct tag *tags) +{ + const struct tag *tag; + + if (tags->hdr.tag != ATAG_CORE) + return; + + for_each_tag(tag, tags) { + if (tag->hdr.tag == ATAG_REVISION) { + system_rev = tag->u.revision.rev; + break; + } + } +} + /* Legacy userspace on Nokia N900 needs ATAGS exported in /proc/atags, * save them while the data is still not overwritten */ static void __init rx51_reserve(void) { - save_atags((const struct tag *)(PAGE_OFFSET + 0x100)); + const struct tag *tags = (const struct tag *)(PAGE_OFFSET + 0x100); + + save_atags(tags); + rx51_set_system_rev(tags); omap_reserve(); } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 9cda974a3009..d7f1d69daf6d 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -18,7 +18,6 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/pinctrl/machine.h> -#include <linux/platform_data/mailbox-omap.h> #include <asm/mach-types.h> #include <asm/mach/map.h> @@ -66,32 +65,6 @@ static int __init omap3_l3_init(void) } omap_postcore_initcall(omap3_l3_init); -#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE) -static inline void __init omap_init_mbox(void) -{ - struct omap_hwmod *oh; - struct platform_device *pdev; - struct omap_mbox_pdata *pdata; - - oh = omap_hwmod_lookup("mailbox"); - if (!oh) { - pr_err("%s: unable to find hwmod\n", __func__); - return; - } - if (!oh->dev_attr) { - pr_err("%s: hwmod doesn't have valid attrs\n", __func__); - return; - } - - pdata = (struct omap_mbox_pdata *)oh->dev_attr; - pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata)); - WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n", - __func__, PTR_ERR(pdev)); -} -#else -static inline void omap_init_mbox(void) { } -#endif /* CONFIG_OMAP2PLUS_MBOX */ - static inline void omap_init_sti(void) {} #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE) @@ -229,7 +202,6 @@ static int __init omap2_init_devices(void) * please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - omap_init_mbox(); omap_init_mcspi(); omap_init_sham(); omap_init_aes(); diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 7b76ce01c21d..8633c703546a 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -101,10 +101,8 @@ static void omap2_onenand_set_async_mode(void __iomem *onenand_base) static void set_onenand_cfg(void __iomem *onenand_base) { - u32 reg; + u32 reg = ONENAND_SYS_CFG1_RDY | ONENAND_SYS_CFG1_INT; - reg = readw(onenand_base + ONENAND_REG_SYS_CFG1); - reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9)); reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) | ONENAND_SYS_CFG1_BL_16; if (onenand_flags & ONENAND_FLAG_SYNCREAD) @@ -123,6 +121,7 @@ static void set_onenand_cfg(void __iomem *onenand_base) reg |= ONENAND_SYS_CFG1_VHF; else reg &= ~ONENAND_SYS_CFG1_VHF; + writew(reg, onenand_base + ONENAND_REG_SYS_CFG1); } @@ -289,6 +288,7 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) } } + onenand_async.sync_write = true; omap2_onenand_calc_async_timings(&t); ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 0437537751bc..f7ff3b9dad87 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -191,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb, { struct platform_device *pdev = to_platform_device(dev); struct omap_device *od; + int err; switch (event) { case BUS_NOTIFY_DEL_DEVICE: if (pdev->archdata.od) omap_device_delete(pdev->archdata.od); break; + case BUS_NOTIFY_UNBOUND_DRIVER: + od = to_omap_device(pdev); + if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) { + dev_info(dev, "enabled after unload, idling\n"); + err = omap_device_idle(pdev); + if (err) + dev_err(dev, "failed to idle\n"); + } + break; case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) omap_device_build_from_dt(pdev); @@ -602,8 +612,10 @@ static int _od_runtime_resume(struct device *dev) int ret; ret = omap_device_enable(pdev); - if (ret) + if (ret) { + dev_err(dev, "use pm_runtime_put_sync_suspend() in driver?\n"); return ret; + } return pm_generic_runtime_resume(dev); } diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index e781e4fae13a..a935d28443da 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -23,6 +23,8 @@ #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> #include <linux/platform_data/wkup_m3.h> +#include <linux/platform_data/pwm_omap_dmtimer.h> +#include <plat/dmtimer.h> #include "common.h" #include "common-board-devices.h" @@ -449,6 +451,24 @@ void omap_auxdata_legacy_init(struct device *dev) dev->platform_data = &twl_gpio_auxdata; } +/* Dual mode timer PWM callbacks platdata */ +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) +struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = { + .request_by_node = omap_dm_timer_request_by_node, + .free = omap_dm_timer_free, + .enable = omap_dm_timer_enable, + .disable = omap_dm_timer_disable, + .get_fclk = omap_dm_timer_get_fclk, + .start = omap_dm_timer_start, + .stop = omap_dm_timer_stop, + .set_load = omap_dm_timer_set_load, + .set_match = omap_dm_timer_set_match, + .set_pwm = omap_dm_timer_set_pwm, + .set_prescaler = omap_dm_timer_set_prescaler, + .write_counter = omap_dm_timer_write_counter, +}; +#endif + /* * Few boards still need auxdata populated before we populate * the dev entries in of_platform_populate(). @@ -502,6 +522,9 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", &wkup_m3_data), #endif +#if IS_ENABLED(CONFIG_OMAP_DM_TIMER) + OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata), +#endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", &omap4_iommu_pdata), diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index eafd120b53f1..1b9f0520dea9 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -86,13 +86,18 @@ ENTRY(enable_omap3630_toggle_l2_on_restore) stmfd sp!, {lr} @ save registers on stack /* Setup so that we will disable and enable l2 */ mov r1, #0x1 - adrl r2, l2dis_3630 @ may be too distant for plain adr - str r1, [r2] + adrl r3, l2dis_3630_offset @ may be too distant for plain adr + ldr r2, [r3] @ value for offset + str r1, [r2, r3] @ write to l2dis_3630 ldmfd sp!, {pc} @ restore regs and return ENDPROC(enable_omap3630_toggle_l2_on_restore) - .text -/* Function to call rom code to save secure ram context */ +/* + * Function to call rom code to save secure ram context. This gets + * relocated to SRAM, so it can be all in .data section. Otherwise + * we need to initialize api_params separately. + */ + .data .align 3 ENTRY(save_secure_ram_context) stmfd sp!, {r4 - r11, lr} @ save registers on stack @@ -126,6 +131,8 @@ ENDPROC(save_secure_ram_context) ENTRY(save_secure_ram_context_sz) .word . - save_secure_ram_context + .text + /* * ====================== * == Idle entry point == @@ -289,12 +296,6 @@ wait_sdrc_ready: bic r5, r5, #0x40 str r5, [r4] -/* - * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a - * base instead. - * Be careful not to clobber r7 when maintaing this code. - */ - is_dll_in_lock_mode: /* Is dll in lock mode? */ ldr r4, sdrc_dlla_ctrl @@ -302,11 +303,7 @@ is_dll_in_lock_mode: tst r5, #0x4 bne exit_nonoff_modes @ Return if locked /* wait till dll locks */ - adr r7, kick_counter wait_dll_lock_timed: - ldr r4, wait_dll_lock_counter - add r4, r4, #1 - str r4, [r7, #wait_dll_lock_counter - kick_counter] ldr r4, sdrc_dlla_status /* Wait 20uS for lock */ mov r6, #8 @@ -330,9 +327,6 @@ kick_dll: orr r6, r6, #(1<<3) @ enable dll str r6, [r4] dsb - ldr r4, kick_counter - add r4, r4, #1 - str r4, [r7] @ kick_counter b wait_dll_lock_timed exit_nonoff_modes: @@ -360,15 +354,6 @@ sdrc_dlla_status: .word SDRC_DLLA_STATUS_V sdrc_dlla_ctrl: .word SDRC_DLLA_CTRL_V - /* - * When exporting to userspace while the counters are in SRAM, - * these 2 words need to be at the end to facilitate retrival! - */ -kick_counter: - .word 0 -wait_dll_lock_counter: - .word 0 - ENTRY(omap3_do_wfi_sz) .word . - omap3_do_wfi @@ -437,7 +422,9 @@ ENTRY(omap3_restore) cmp r2, #0x0 @ Check if target power state was OFF or RET bne logic_l1_restore - ldr r0, l2dis_3630 + adr r1, l2dis_3630_offset @ address for offset + ldr r0, [r1] @ value for offset + ldr r0, [r1, r0] @ value at l2dis_3630 cmp r0, #0x1 @ should we disable L2 on 3630? bne skipl2dis mrc p15, 0, r0, c1, c0, 1 @@ -449,12 +436,14 @@ skipl2dis: and r1, #0x700 cmp r1, #0x300 beq l2_inv_gp + adr r0, l2_inv_api_params_offset + ldr r3, [r0] + add r3, r3, r0 @ r3 points to dummy parameters mov r0, #40 @ set service ID for PPA mov r12, r0 @ copy secure Service ID in r12 mov r1, #0 @ set task id for ROM code in r1 mov r2, #4 @ set some flags in r2, r6 mov r6, #0xff - adr r3, l2_inv_api_params @ r3 points to dummy parameters dsb @ data write barrier dmb @ data memory barrier smc #1 @ call SMI monitor (smi #1) @@ -488,8 +477,8 @@ skipl2dis: b logic_l1_restore .align -l2_inv_api_params: - .word 0x1, 0x00 +l2_inv_api_params_offset: + .long l2_inv_api_params - . l2_inv_gp: /* Execute smi to invalidate L2 cache */ mov r12, #0x1 @ set up to invalidate L2 @@ -506,7 +495,9 @@ l2_inv_gp: mov r12, #0x2 smc #0 @ Call SMI monitor (smieq) logic_l1_restore: - ldr r1, l2dis_3630 + adr r0, l2dis_3630_offset @ adress for offset + ldr r1, [r0] @ value for offset + ldr r1, [r0, r1] @ value at l2dis_3630 cmp r1, #0x1 @ Test if L2 re-enable needed on 3630 bne skipl2reen mrc p15, 0, r1, c1, c0, 1 @@ -535,9 +526,17 @@ control_stat: .word CONTROL_STAT control_mem_rta: .word CONTROL_MEM_RTA_CTRL +l2dis_3630_offset: + .long l2dis_3630 - . + + .data l2dis_3630: .word 0 + .data +l2_inv_api_params: + .word 0x1, 0x00 + /* * Internal functions */ diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S index 9b09d85d811a..c7a3b4aab4b5 100644 --- a/arch/arm/mach-omap2/sleep44xx.S +++ b/arch/arm/mach-omap2/sleep44xx.S @@ -29,12 +29,6 @@ dsb .endm -ppa_zero_params: - .word 0x0 - -ppa_por_params: - .word 1, 0 - #ifdef CONFIG_ARCH_OMAP4 /* @@ -266,7 +260,9 @@ ENTRY(omap4_cpu_resume) beq skip_ns_smp_enable ppa_actrl_retry: mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX - adr r3, ppa_zero_params @ Pointer to parameters + adr r1, ppa_zero_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_zero_params mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag mov r6, #0xff @@ -303,7 +299,9 @@ skip_ns_smp_enable: ldr r0, =OMAP4_PPA_L2_POR_INDEX ldr r1, =OMAP44XX_SAR_RAM_BASE ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET] - adr r3, ppa_por_params + adr r1, ppa_por_params_offset + ldr r3, [r1] + add r3, r3, r1 @ Pointer to ppa_por_params str r4, [r3, #0x04] mov r1, #0x0 @ Process ID mov r2, #0x4 @ Flag @@ -328,6 +326,8 @@ skip_l2en: #endif b cpu_resume @ Jump to generic resume +ppa_por_params_offset: + .long ppa_por_params - . ENDPROC(omap4_cpu_resume) #endif /* CONFIG_ARCH_OMAP4 */ @@ -380,4 +380,13 @@ ENTRY(omap_do_wfi) nop ldmfd sp!, {pc} +ppa_zero_params_offset: + .long ppa_zero_params - . ENDPROC(omap_do_wfi) + + .data +ppa_zero_params: + .word 0 + +ppa_por_params: + .word 1, 0 diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index def40a0dd60c..70ab4a25a5f8 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -1,5 +1,6 @@ menuconfig ARCH_REALVIEW - bool "ARM Ltd. RealView family" if ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 + bool "ARM Ltd. RealView family" + depends on ARCH_MULTI_V5 || ARCH_MULTI_V6 || ARCH_MULTI_V7 select ARM_AMBA select ARM_TIMER_SP804 select COMMON_CLK_VERSATILE diff --git a/arch/arm/mach-realview/platsmp-dt.c b/arch/arm/mach-realview/platsmp-dt.c index 65585392655b..6964e8876061 100644 --- a/arch/arm/mach-realview/platsmp-dt.c +++ b/arch/arm/mach-realview/platsmp-dt.c @@ -80,7 +80,7 @@ static void __init realview_smp_prepare_cpus(unsigned int max_cpus) virt_to_phys(versatile_secondary_startup)); } -struct smp_operations realview_dt_smp_ops __initdata = { +static const struct smp_operations realview_dt_smp_ops __initconst = { .smp_prepare_cpus = realview_smp_prepare_cpus, .smp_secondary_init = versatile_secondary_init, .smp_boot_secondary = versatile_boot_secondary, diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h index 9cb11215ceba..b3a4ed5289ec 100644 --- a/arch/arm/mach-shmobile/common.h +++ b/arch/arm/mach-shmobile/common.h @@ -4,7 +4,6 @@ extern void shmobile_init_delay(void); extern void shmobile_boot_vector(void); extern unsigned long shmobile_boot_fn; -extern unsigned long shmobile_boot_arg; extern unsigned long shmobile_boot_size; extern void shmobile_smp_boot(void); extern void shmobile_smp_sleep(void); diff --git a/arch/arm/mach-shmobile/headsmp-scu.S b/arch/arm/mach-shmobile/headsmp-scu.S index fa5248c52399..5e503d91ad70 100644 --- a/arch/arm/mach-shmobile/headsmp-scu.S +++ b/arch/arm/mach-shmobile/headsmp-scu.S @@ -38,9 +38,3 @@ ENTRY(shmobile_boot_scu) b secondary_startup ENDPROC(shmobile_boot_scu) - - .text - .align 2 - .globl shmobile_scu_base -shmobile_scu_base: - .space 4 diff --git a/arch/arm/mach-shmobile/headsmp.S b/arch/arm/mach-shmobile/headsmp.S index 330c1fc63197..32e0bf6e3ccb 100644 --- a/arch/arm/mach-shmobile/headsmp.S +++ b/arch/arm/mach-shmobile/headsmp.S @@ -24,7 +24,6 @@ .arm .align 12 ENTRY(shmobile_boot_vector) - ldr r0, 2f ldr r1, 1f bx r1 @@ -34,9 +33,6 @@ ENDPROC(shmobile_boot_vector) .globl shmobile_boot_fn shmobile_boot_fn: 1: .space 4 - .globl shmobile_boot_arg -shmobile_boot_arg: -2: .space 4 .globl shmobile_boot_size shmobile_boot_size: .long . - shmobile_boot_vector @@ -46,13 +42,15 @@ shmobile_boot_size: */ ENTRY(shmobile_smp_boot) - @ r0 = MPIDR_HWID_BITMASK mrc p15, 0, r1, c0, c0, 5 @ r1 = MPIDR - and r0, r1, r0 @ r0 = cpu_logical_map() value + and r0, r1, #0xffffff @ MPIDR_HWID_BITMASK + @ r0 = cpu_logical_map() value mov r1, #0 @ r1 = CPU index - adr r5, 1f @ array of per-cpu mpidr values - adr r6, 2f @ array of per-cpu functions - adr r7, 3f @ array of per-cpu arguments + adr r2, 1f + ldmia r2, {r5, r6, r7} + add r5, r5, r2 @ array of per-cpu mpidr values + add r6, r6, r2 @ array of per-cpu functions + add r7, r7, r2 @ array of per-cpu arguments shmobile_smp_boot_find_mpidr: ldr r8, [r5, r1, lsl #2] @@ -80,12 +78,18 @@ ENTRY(shmobile_smp_sleep) b shmobile_smp_boot ENDPROC(shmobile_smp_sleep) + .align 2 +1: .long shmobile_smp_mpidr - . + .long shmobile_smp_fn - 1b + .long shmobile_smp_arg - 1b + + .bss .globl shmobile_smp_mpidr shmobile_smp_mpidr: -1: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_fn shmobile_smp_fn: -2: .space NR_CPUS * 4 + .space NR_CPUS * 4 .globl shmobile_smp_arg shmobile_smp_arg: -3: .space NR_CPUS * 4 + .space NR_CPUS * 4 diff --git a/arch/arm/mach-shmobile/platsmp-apmu.c b/arch/arm/mach-shmobile/platsmp-apmu.c index 911884f7e28b..aba75c89f9c1 100644 --- a/arch/arm/mach-shmobile/platsmp-apmu.c +++ b/arch/arm/mach-shmobile/platsmp-apmu.c @@ -123,7 +123,6 @@ void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus, { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* perform per-cpu setup */ apmu_parse_cfg(apmu_init_cpu, apmu_config, num); diff --git a/arch/arm/mach-shmobile/platsmp-scu.c b/arch/arm/mach-shmobile/platsmp-scu.c index 64663110ab6c..081a097c9219 100644 --- a/arch/arm/mach-shmobile/platsmp-scu.c +++ b/arch/arm/mach-shmobile/platsmp-scu.c @@ -17,6 +17,9 @@ #include <asm/smp_scu.h> #include "common.h" + +void __iomem *shmobile_scu_base; + static int shmobile_smp_scu_notifier_call(struct notifier_block *nfb, unsigned long action, void *hcpu) { @@ -41,7 +44,6 @@ void __init shmobile_smp_scu_prepare_cpus(unsigned int max_cpus) { /* install boot code shared by all CPUs */ shmobile_boot_fn = virt_to_phys(shmobile_smp_boot); - shmobile_boot_arg = MPIDR_HWID_BITMASK; /* enable SCU and cache coherency on booting CPU */ scu_enable(shmobile_scu_base); diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index b854fe2095ad..0b024a9dbd43 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -92,8 +92,6 @@ static void __init r8a7779_smp_prepare_cpus(unsigned int max_cpus) { /* Map the reset vector (in headsmp-scu.S, headsmp.S) */ __raw_writel(__pa(shmobile_boot_vector), AVECR); - shmobile_boot_fn = virt_to_phys(shmobile_boot_scu); - shmobile_boot_arg = (unsigned long)shmobile_scu_base; /* setup r8a7779 specific SCU bits */ shmobile_scu_base = IOMEM(R8A7779_SCU_BASE); diff --git a/arch/arm/mach-tango/Kconfig b/arch/arm/mach-tango/Kconfig index d6a3714b096e..ebe15b93bbe8 100644 --- a/arch/arm/mach-tango/Kconfig +++ b/arch/arm/mach-tango/Kconfig @@ -1,5 +1,6 @@ config ARCH_TANGO - bool "Sigma Designs Tango4 (SMP87xx)" if ARCH_MULTI_V7 + bool "Sigma Designs Tango4 (SMP87xx)" + depends on ARCH_MULTI_V7 # Cortex-A9 MPCore r3p0, PL310 r3p2 select ARCH_HAS_HOLES_MEMORYMODEL select ARM_ERRATA_754322 diff --git a/arch/arm/mach-tango/platsmp.c b/arch/arm/mach-tango/platsmp.c index a18d5a34e2f5..a21f55e000d2 100644 --- a/arch/arm/mach-tango/platsmp.c +++ b/arch/arm/mach-tango/platsmp.c @@ -9,7 +9,7 @@ static int tango_boot_secondary(unsigned int cpu, struct task_struct *idle) return 0; } -static struct smp_operations tango_smp_ops __initdata = { +static const struct smp_operations tango_smp_ops __initconst = { .smp_boot_secondary = tango_boot_secondary, }; diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c index 4b4058db0781..66353caa35b9 100644 --- a/arch/arm/mm/mmap.c +++ b/arch/arm/mm/mmap.c @@ -173,7 +173,7 @@ unsigned long arch_mmap_rnd(void) { unsigned long rnd; - rnd = (unsigned long)get_random_int() & ((1 << mmap_rnd_bits) - 1); + rnd = get_random_long() & ((1UL << mmap_rnd_bits) - 1); return rnd << PAGE_SHIFT; } |