diff options
Diffstat (limited to 'arch/arm')
206 files changed, 9519 insertions, 1572 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d45ca1bf1de0..a920f2c422e9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -523,6 +523,8 @@ config ARCH_DOVE select CPU_V7 select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI + select PINCTRL + select PINCTRL_DOVE select PLAT_ORION_LEGACY select USB_ARCH_HAS_EHCI help @@ -534,6 +536,8 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select GENERIC_CLOCKEVENTS select PCI + select PINCTRL + select PINCTRL_KIRKWOOD select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: @@ -911,6 +915,7 @@ config ARCH_DAVINCI select GENERIC_IRQ_CHIP select HAVE_IDE select NEED_MACH_GPIO_H + select USE_OF select ZONE_DMA help Support for TI's DaVinci platform. @@ -945,6 +950,7 @@ config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" select ARM_AMBA select ARM_GIC + select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS select ICST diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 5566520686a5..00e9a53888ba 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -132,6 +132,23 @@ choice their output to UART1 serial port on DaVinci TNETV107X devices. + config DEBUG_ZYNQ_UART0 + bool "Kernel low-level debugging on Xilinx Zynq using UART0" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART0 on the Zynq platform. + + config DEBUG_ZYNQ_UART1 + bool "Kernel low-level debugging on Xilinx Zynq using UART1" + depends on ARCH_ZYNQ + help + Say Y here if you want the debug print routines to direct + their output to UART1 on the Zynq platform. + + If you have a ZC702 board and want early boot messages to + appear on the USB serial adaptor, select this option. + config DEBUG_DC21285_PORT bool "Kernel low-level debugging messages via footbridge serial port" depends on FOOTBRIDGE @@ -209,20 +226,12 @@ choice Say Y here if you want kernel low-level debugging support on i.MX50 or i.MX53. - config DEBUG_IMX6Q_UART2 - bool "i.MX6Q Debug UART2" + config DEBUG_IMX6Q_UART + bool "i.MX6Q Debug UART" depends on SOC_IMX6Q help Say Y here if you want kernel low-level debugging support - on i.MX6Q UART2. This is correct for e.g. the SabreLite - board. - - config DEBUG_IMX6Q_UART4 - bool "i.MX6Q Debug UART4" - depends on SOC_IMX6Q - help - Say Y here if you want kernel low-level debugging support - on i.MX6Q UART4. + on i.MX6Q. config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" @@ -409,6 +418,15 @@ choice endchoice +config DEBUG_IMX6Q_UART_PORT + int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART + range 1 5 + default 1 + depends on SOC_IMX6Q + help + Choose UART port on which kernel low-level debug messages + should be output. + config DEBUG_LL_INCLUDE string default "debug/icedcc.S" if DEBUG_ICEDCC @@ -418,8 +436,7 @@ config DEBUG_LL_INCLUDE DEBUG_IMX31_IMX35_UART || \ DEBUG_IMX51_UART || \ DEBUG_IMX50_IMX53_UART ||\ - DEBUG_IMX6Q_UART2 || \ - DEBUG_IMX6Q_UART4 + DEBUG_IMX6Q_UART default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2458b69e2be6..89dcc14f1931 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -17,13 +17,17 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ usb_a9263.dtb \ usb_a9g20.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ + da850-evm.dtb dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ dove-dove-db.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ - exynos5250-smdk5250.dtb + exynos4412-smdk4412.dtb \ + exynos5250-smdk5250.dtb \ + exynos5250-snow.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ integratorcp.dtb @@ -36,11 +40,20 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ kirkwood-iomega_ix2_200.dtb \ + kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ + kirkwood-mplcec4.dtb \ + kirkwood-ns2.dtb \ + kirkwood-ns2lite.dtb \ + kirkwood-ns2max.dtb \ + kirkwood-ns2mini.dtb \ + kirkwood-nsa310.dtb \ + kirkwood-topkick.dtb \ kirkwood-ts219-6281.dtb \ - kirkwood-ts219-6282.dtb + kirkwood-ts219-6282.dtb \ + kirkwood-openblocks_a6.dtb dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ @@ -51,16 +64,20 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ imx53-qsb.dtb \ imx53-smd.dtb \ imx6q-arm2.dtb \ + imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx23-olinuxino.dtb \ imx23-stmp378x_devb.dtb \ + imx28-apf28.dtb \ + imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ imx28-cfa10036.dtb \ imx28-cfa10049.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ + imx28-sps1.dtb \ imx28-tx28.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-beagle.dtb \ @@ -75,8 +92,12 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ am335x-bone.dtb +dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb -dtb-$(CONFIG_ARCH_U8500) += snowball.dtb +dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \ + hrefprev60.dtb \ + hrefv60plus.dtb \ + ccu9540.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ r8a7740-armadillo800eva.dtb \ sh73a0-kzm9g.dtb @@ -105,5 +126,6 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ wm8650-mid.dtb +dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb endif diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index d410581a5a85..bfb5bb6528b5 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -246,6 +246,12 @@ trigger-external; }; }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 3e6e5c1abbf3..ff5461278c03 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -195,6 +195,12 @@ #size-cells = <0>; status = "disabled"; }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 3add030d61f8..a98c00a234eb 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -262,6 +262,12 @@ trigger-value = <0x6>; }; }; + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ccu9540.dts new file mode 100644 index 000000000000..04305463f00d --- /dev/null +++ b/arch/arm/boot/dts/ccu9540.dts @@ -0,0 +1,72 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson CCU9540 platform with Device Tree"; + compatible = "st-ericsson,ccu9540", "st-ericsson,u9540"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&gpio7 6 0x4>; // 230 + cd-inverted; + + status = "okay"; + }; + + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi new file mode 100644 index 000000000000..fddd17417433 --- /dev/null +++ b/arch/arm/boot/dts/cros5250-common.dtsi @@ -0,0 +1,184 @@ +/* + * Common device tree include for all Exynos 5250 boards based off of Daisy. + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + aliases { + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + }; + + i2c@12C60000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + gpios = <&gpb3 0 2 3 0>, + <&gpb3 1 2 3 0>; + }; + + i2c@12C70000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + gpios = <&gpb3 2 2 3 0>, + <&gpb3 3 2 3 0>; + }; + + i2c@12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + /* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ + gpios = <&gpa0 6 3 0 0>, + <&gpa0 7 3 0 0>; + + hdmiddc@50 { + compatible = "samsung,exynos5-hdmiddc"; + reg = <0x50>; + }; + }; + + i2c@12C90000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpa1 2 3 3 0>, + <&gpa1 3 3 3 0>; + }; + + i2c@12CA0000 { + status = "disabled"; + }; + + i2c@12CB0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpa2 2 3 3 0>, + <&gpa2 3 3 3 0>; + }; + + i2c@12CC0000 { + status = "disabled"; + }; + + i2c@12CD0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpb2 2 3 3 0>, + <&gpb2 3 3 3 0>; + }; + + i2c@12CE0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy@38 { + compatible = "samsung,exynos5-hdmiphy"; + reg = <0x38>; + }; + }; + + dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <8>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; + }; + }; + + dwmmc1@12210000 { + status = "disabled"; + }; + + dwmmc2@12220000 { + num-slots = <1>; + supports-highspeed; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <4>; + samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; + wp-gpios = <&gpc2 1 0 0 3>; + gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, + <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, + <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>; + }; + }; + + dwmmc3@12230000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <4>; + /* See board-specific dts files for GPIOs */ + }; + }; + + spi_0: spi@12d20000 { + status = "disabled"; + }; + + spi_1: spi@12d30000 { + gpios = <&gpa2 4 2 3 0>, + <&gpa2 6 2 3 0>, + <&gpa2 7 2 3 0>; + samsung,spi-src-clk = <0>; + num-cs = <1>; + }; + + spi_2: spi@12d40000 { + status = "disabled"; + }; + + hdmi { + hpd-gpio = <&gpx3 7 0xf 1 3>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpx1 3 0 0x10000 0>; + linux,code = <116>; /* KEY_POWER */ + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts new file mode 100644 index 000000000000..422fdb3fcfc1 --- /dev/null +++ b/arch/arm/boot/dts/da850-enbw-cmc.dts @@ -0,0 +1,30 @@ +/* + * Device Tree for AM1808 EnBW CMC board + * + * Copyright 2012 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/dts-v1/; +/include/ "da850.dtsi" + +/ { + compatible = "enbw,cmc", "ti,da850"; + model = "EnBW CMC"; + + soc { + serial0: serial@1c42000 { + status = "okay"; + }; + serial1: serial@1d0c000 { + status = "okay"; + }; + serial2: serial@1d0d000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts new file mode 100644 index 000000000000..37dc5a3243b8 --- /dev/null +++ b/arch/arm/boot/dts/da850-evm.dts @@ -0,0 +1,28 @@ +/* + * Device Tree for DA850 EVM board + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation, version 2. + */ +/dts-v1/; +/include/ "da850.dtsi" + +/ { + compatible = "ti,da850-evm", "ti,da850"; + model = "DA850/AM1808/OMAP-L138 EVM"; + + soc { + serial0: serial@1c42000 { + status = "okay"; + }; + serial1: serial@1d0c000 { + status = "okay"; + }; + serial2: serial@1d0d000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi new file mode 100644 index 000000000000..640ab75c20db --- /dev/null +++ b/arch/arm/boot/dts/da850.dtsi @@ -0,0 +1,60 @@ +/* + * Copyright 2012 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +/include/ "skeleton.dtsi" + +/ { + arm { + #address-cells = <1>; + #size-cells = <1>; + ranges; + intc: interrupt-controller { + compatible = "ti,cp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <100>; + reg = <0xfffee000 0x2000>; + }; + }; + soc { + compatible = "simple-bus"; + model = "da850"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x01c00000 0x400000>; + + serial0: serial@1c42000 { + compatible = "ns16550a"; + reg = <0x42000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <25>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + serial1: serial@1d0c000 { + compatible = "ns16550a"; + reg = <0x10c000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <53>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + serial2: serial@1d0d000 { + compatible = "ns16550a"; + reg = <0x10d000 0x100>; + clock-frequency = <150000000>; + reg-shift = <2>; + interrupts = <61>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 4b0e0ca08f40..9f553630242a 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -209,123 +209,103 @@ // DB8500_REGULATOR_VAPE db8500_vape_reg: db8500_vape { regulator-compatible = "db8500_vape"; - regulator-name = "db8500-vape"; regulator-always-on; }; // DB8500_REGULATOR_VARM db8500_varm_reg: db8500_varm { regulator-compatible = "db8500_varm"; - regulator-name = "db8500-varm"; }; // DB8500_REGULATOR_VMODEM db8500_vmodem_reg: db8500_vmodem { regulator-compatible = "db8500_vmodem"; - regulator-name = "db8500-vmodem"; }; // DB8500_REGULATOR_VPLL db8500_vpll_reg: db8500_vpll { regulator-compatible = "db8500_vpll"; - regulator-name = "db8500-vpll"; }; // DB8500_REGULATOR_VSMPS1 db8500_vsmps1_reg: db8500_vsmps1 { regulator-compatible = "db8500_vsmps1"; - regulator-name = "db8500-vsmps1"; }; // DB8500_REGULATOR_VSMPS2 db8500_vsmps2_reg: db8500_vsmps2 { regulator-compatible = "db8500_vsmps2"; - regulator-name = "db8500-vsmps2"; }; // DB8500_REGULATOR_VSMPS3 db8500_vsmps3_reg: db8500_vsmps3 { regulator-compatible = "db8500_vsmps3"; - regulator-name = "db8500-vsmps3"; }; // DB8500_REGULATOR_VRF1 db8500_vrf1_reg: db8500_vrf1 { regulator-compatible = "db8500_vrf1"; - regulator-name = "db8500-vrf1"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSP db8500_sva_mmdsp_reg: db8500_sva_mmdsp { regulator-compatible = "db8500_sva_mmdsp"; - regulator-name = "db8500-sva-mmdsp"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSPRET db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { regulator-compatible = "db8500_sva_mmdsp_ret"; - regulator-name = "db8500-sva-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SVAPIPE db8500_sva_pipe_reg: db8500_sva_pipe { regulator-compatible = "db8500_sva_pipe"; - regulator-name = "db8500_sva_pipe"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSP db8500_sia_mmdsp_reg: db8500_sia_mmdsp { regulator-compatible = "db8500_sia_mmdsp"; - regulator-name = "db8500_sia_mmdsp"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSPRET db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { - regulator-name = "db8500-sia-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SIAPIPE db8500_sia_pipe_reg: db8500_sia_pipe { regulator-compatible = "db8500_sia_pipe"; - regulator-name = "db8500-sia-pipe"; }; // DB8500_REGULATOR_SWITCH_SGA db8500_sga_reg: db8500_sga { regulator-compatible = "db8500_sga"; - regulator-name = "db8500-sga"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_B2R2_MCDE db8500_b2r2_mcde_reg: db8500_b2r2_mcde { regulator-compatible = "db8500_b2r2_mcde"; - regulator-name = "db8500-b2r2-mcde"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_ESRAM12 db8500_esram12_reg: db8500_esram12 { regulator-compatible = "db8500_esram12"; - regulator-name = "db8500-esram12"; }; // DB8500_REGULATOR_SWITCH_ESRAM12RET db8500_esram12_ret_reg: db8500_esram12_ret { regulator-compatible = "db8500_esram12_ret"; - regulator-name = "db8500-esram12-ret"; }; // DB8500_REGULATOR_SWITCH_ESRAM34 db8500_esram34_reg: db8500_esram34 { regulator-compatible = "db8500_esram34"; - regulator-name = "db8500-esram34"; }; // DB8500_REGULATOR_SWITCH_ESRAM34RET db8500_esram34_ret_reg: db8500_esram34_ret { regulator-compatible = "db8500_esram34_ret"; - regulator-name = "db8500-esram34-ret"; }; }; @@ -404,7 +384,6 @@ // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-compatible = "ab8500_ldo_aux1"; - regulator-name = "V-DISPLAY"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2900000>; regulator-boot-on; @@ -415,7 +394,6 @@ // supplies to the on-board eMMC ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { regulator-compatible = "ab8500_ldo_aux2"; - regulator-name = "V-eMMC1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; @@ -423,7 +401,6 @@ // supply for VAUX3; SDcard slots ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { regulator-compatible = "ab8500_ldo_aux3"; - regulator-name = "V-MMC-SD"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; }; @@ -431,49 +408,41 @@ // supply for v-intcore12; VINTCORE12 LDO ab8500_ldo_initcore_reg: ab8500_ldo_initcore { regulator-compatible = "ab8500_ldo_initcore"; - regulator-name = "V-INTCORE"; }; // supply for tvout; gpadc; TVOUT LDO ab8500_ldo_tvout_reg: ab8500_ldo_tvout { regulator-compatible = "ab8500_ldo_tvout"; - regulator-name = "V-TVOUT"; }; // supply for ab8500-usb; USB LDO ab8500_ldo_usb_reg: ab8500_ldo_usb { regulator-compatible = "ab8500_ldo_usb"; - regulator-name = "dummy"; }; // supply for ab8500-vaudio; VAUDIO LDO ab8500_ldo_audio_reg: ab8500_ldo_audio { regulator-compatible = "ab8500_ldo_audio"; - regulator-name = "V-AUD"; }; // supply for v-anamic1 VAMic1-LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { regulator-compatible = "ab8500_ldo_anamic1"; - regulator-name = "V-AMIC1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { regulator-compatible = "ab8500_ldo_amamic2"; - regulator-name = "V-AMIC2"; }; // supply for v-dmic; VDMIC LDO ab8500_ldo_dmic_reg: ab8500_ldo_dmic { regulator-compatible = "ab8500_ldo_dmic"; - regulator-name = "V-DMIC"; }; // supply for U8500 CSI/DSI; VANA LDO ab8500_ldo_ana_reg: ab8500_ldo_ana { regulator-compatible = "ab8500_ldo_ana"; - regulator-name = "V-CSI/DSI"; }; }; }; @@ -577,42 +546,42 @@ status = "disabled"; }; - sdi@80126000 { + sdi0_per1@80126000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80126000 0x1000>; interrupts = <0 60 0x4>; status = "disabled"; }; - sdi@80118000 { + sdi1_per2@80118000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80118000 0x1000>; interrupts = <0 50 0x4>; status = "disabled"; }; - sdi@80005000 { + sdi2_per3@80005000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80005000 0x1000>; interrupts = <0 41 0x4>; status = "disabled"; }; - sdi@80119000 { + sdi3_per2@80119000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80119000 0x1000>; interrupts = <0 59 0x4>; status = "disabled"; }; - sdi@80114000 { + sdi4_per2@80114000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80114000 0x1000>; interrupts = <0 99 0x4>; status = "disabled"; }; - sdi@80008000 { + sdi5_per3@80008000 { compatible = "arm,pl18x", "arm,primecell"; reg = <0x80008000 0x1000>; interrupts = <0 100 0x4>; @@ -660,5 +629,19 @@ ranges = <0 0x50000000 0x4000000>; status = "disabled"; }; + + vmmci: regulator-gpio { + compatible = "regulator-gpio"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + regulator-name = "mmci-reg"; + regulator-type = "voltage"; + + states = <1800000 0x1 + 2900000 0x0>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 0adbd5a38095..fed7d3f9f431 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -40,3 +40,13 @@ reg = <0>; }; }; + +&pinctrl { + pinctrl-0 = <&pmx_gpio_18>; + pinctrl-names = "default"; + + pmx_gpio_18: pmx-gpio-18 { + marvell,pins = "mpp18"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 5a00022383e7..61f391412a5a 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -4,6 +4,12 @@ compatible = "marvell,dove"; model = "Marvell Armada 88AP510 SoC"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + soc@f1000000 { compatible = "simple-bus"; #address-cells = <1>; @@ -72,7 +78,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0xd0400 0x20>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <12>, <13>, <14>, <60>; }; @@ -81,7 +88,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0xd0420 0x20>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <61>; }; @@ -90,7 +98,12 @@ #gpio-cells = <2>; gpio-controller; reg = <0xe8400 0x0c>; - ngpio = <8>; + ngpios = <8>; + }; + + pinctrl: pinctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x10>; }; spi0: spi@10600 { diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index b7354e6506de..96e50f569433 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -22,10 +22,22 @@ status = "okay"; }; + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart2: serial@fffb8000 { + status = "okay"; + }; + usb1: gadget@fffa4000 { atmel,vbus-gpio = <&pioC 5 0>; status = "okay"; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; usb0: ohci@00500000 { diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index a26c3dd58269..3428f1a94dcc 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -28,6 +28,44 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; + i2c0 = &i2c_0; + i2c1 = &i2c_1; + i2c2 = &i2c_2; + i2c3 = &i2c_3; + i2c4 = &i2c_4; + i2c5 = &i2c_5; + i2c6 = &i2c_6; + i2c7 = &i2c_7; + }; + + pd_mfc: mfc-power-domain@10023C40 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C40 0x20>; + }; + + pd_g3d: g3d-power-domain@10023C60 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C60 0x20>; + }; + + pd_lcd0: lcd0-power-domain@10023C80 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C80 0x20>; + }; + + pd_tv: tv-power-domain@10023C20 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C20 0x20>; + }; + + pd_cam: cam-power-domain@10023C00 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023C00 0x20>; + }; + + pd_gps: gps-power-domain@10023CE0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CE0 0x20>; }; gic:interrupt-controller@10490000 { @@ -121,7 +159,7 @@ status = "disabled"; }; - i2c@13860000 { + i2c_0: i2c@13860000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -130,7 +168,7 @@ status = "disabled"; }; - i2c@13870000 { + i2c_1: i2c@13870000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -139,7 +177,7 @@ status = "disabled"; }; - i2c@13880000 { + i2c_2: i2c@13880000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -148,7 +186,7 @@ status = "disabled"; }; - i2c@13890000 { + i2c_3: i2c@13890000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -157,7 +195,7 @@ status = "disabled"; }; - i2c@138A0000 { + i2c_4: i2c@138A0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -166,7 +204,7 @@ status = "disabled"; }; - i2c@138B0000 { + i2c_5: i2c@138B0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -175,7 +213,7 @@ status = "disabled"; }; - i2c@138C0000 { + i2c_6: i2c@138C0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; @@ -184,7 +222,7 @@ status = "disabled"; }; - i2c@138D0000 { + i2c_7: i2c@138D0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,s3c2440-i2c"; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 3e68f52e8454..f2710018e84e 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -22,38 +22,54 @@ compatible = "insignal,origen", "samsung,exynos4210"; memory { - reg = <0x40000000 0x40000000>; + reg = <0x40000000 0x10000000 + 0x50000000 0x10000000 + 0x60000000 0x10000000 + 0x70000000 0x10000000>; }; chosen { bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; + mmc_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpx1 1 0>; + enable-active-high; + }; + sdhci@12530000 { - samsung,sdhci-bus-width = <4>; - linux,mmc_cap_4_bit_data; - samsung,sdhci-cd-internal; - gpio-cd = <&gpk2 2 2 3 3>; - gpios = <&gpk2 0 2 0 3>, - <&gpk2 1 2 0 3>, - <&gpk2 3 2 3 3>, - <&gpk2 4 2 3 3>, - <&gpk2 5 2 3 3>, - <&gpk2 6 2 3 3>; + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; status = "okay"; }; sdhci@12510000 { - samsung,sdhci-bus-width = <4>; - linux,mmc_cap_4_bit_data; - samsung,sdhci-cd-internal; - gpio-cd = <&gpk0 2 2 3 3>; - gpios = <&gpk0 0 2 0 3>, - <&gpk0 1 2 0 3>, - <&gpk0 3 2 3 3>, - <&gpk0 4 2 3 3>, - <&gpk0 5 2 3 3>, - <&gpk0 6 2 3 3>; + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_cd>; + pinctrl-names = "default"; + vmmc-supply = <&mmc_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { status = "okay"; }; @@ -64,35 +80,35 @@ up { label = "Up"; - gpios = <&gpx2 0 0 0x10000 2>; + gpios = <&gpx2 0 1>; linux,code = <103>; gpio-key,wakeup; }; down { label = "Down"; - gpios = <&gpx2 1 0 0x10000 2>; + gpios = <&gpx2 1 1>; linux,code = <108>; gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpx1 7 0 0x10000 2>; + gpios = <&gpx1 7 1>; linux,code = <158>; gpio-key,wakeup; }; home { label = "Home"; - gpios = <&gpx1 6 0 0x10000 2>; + gpios = <&gpx1 6 1>; linux,code = <102>; gpio-key,wakeup; }; menu { label = "Menu"; - gpios = <&gpx1 5 0 0x10000 2>; + gpios = <&gpx1 5 1>; linux,code = <139>; gpio-key,wakeup; }; @@ -101,7 +117,7 @@ leds { compatible = "gpio-leds"; status { - gpios = <&gpx1 3 0 0x10000 2>; + gpios = <&gpx1 3 1>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index b12cf272ad0d..55a2efb763d1 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -16,6 +16,134 @@ / { pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe2: gpe2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe3: gpe3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe4: gpe4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + uart0_data: uart0-data { samsung,pins = "gpa0-0", "gpa0-1"; samsung,pin-function = <0x2>; @@ -205,200 +333,345 @@ }; pinctrl@11000000 { + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + sd0_clk: sd0-clk { samsung,pins = "gpk0-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_cmd: sd0-cmd { samsung,pins = "gpk0-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_cd: sd0-cd { samsung,pins = "gpk0-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_bus1: sd0-bus-width1 { samsung,pins = "gpk0-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_bus4: sd0-bus-width4 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd0_bus8: sd0-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_clk: sd4-clk { samsung,pins = "gpk0-0"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_cmd: sd4-cmd { samsung,pins = "gpk0-1"; samsung,pin-function = <3>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_cd: sd4-cd { samsung,pins = "gpk0-2"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_bus1: sd4-bus-width1 { samsung,pins = "gpk0-3"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_bus4: sd4-bus-width4 { samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <3>; samsung,pin-pud = <4>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_clk: sd1-clk { samsung,pins = "gpk1-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_cmd: sd1-cmd { samsung,pins = "gpk1-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_cd: sd1-cd { samsung,pins = "gpk1-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_bus1: sd1-bus-width1 { samsung,pins = "gpk1-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd1_bus4: sd1-bus-width4 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_clk: sd2-clk { samsung,pins = "gpk2-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_cmd: sd2-cmd { samsung,pins = "gpk2-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_cd: sd2-cd { samsung,pins = "gpk2-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_bus1: sd2-bus-width1 { samsung,pins = "gpk2-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_bus4: sd2-bus-width4 { samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd2_bus8: sd2-bus-width8 { samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; samsung,pin-function = <3>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_clk: sd3-clk { samsung,pins = "gpk3-0"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_cmd: sd3-cmd { samsung,pins = "gpk3-1"; samsung,pin-function = <2>; samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_cd: sd3-cd { samsung,pins = "gpk3-2"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_bus1: sd3-bus-width1 { samsung,pins = "gpk3-3"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; sd3_bus4: sd3-bus-width4 { samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; samsung,pin-function = <2>; samsung,pin-pud = <3>; - samsung,pin-drv = <0>; + samsung,pin-drv = <3>; }; eint0: ext-int0 { @@ -438,6 +711,11 @@ }; pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + }; + i2s0_bus: i2s0-bus { samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", "gpz-4", "gpz-5", "gpz-6"; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 63610c3ba3af..9b23a8255e39 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -43,6 +43,22 @@ status = "okay"; }; + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + keypad@100A0000 { samsung,keypad-num-rows = <2>; samsung,keypad-num-columns = <8>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index a21511c14071..c346b64dff55 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -35,24 +35,15 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 1 0 0>; + gpio = <&gpk0 2 0>; enable-active-high; }; sdhci_emmc: sdhci@12510000 { bus-width = <8>; non-removable; - broken-voltage; - gpios = <&gpk0 0 2 0 3>, - <&gpk0 1 2 0 3>, - <&gpk0 3 2 2 3>, - <&gpk0 4 2 2 3>, - <&gpk0 5 2 2 3>, - <&gpk0 6 2 2 3>, - <&gpk1 3 3 3 3>, - <&gpk1 4 3 3 3>, - <&gpk1 5 3 3 3>, - <&gpk1 6 3 3 3>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>; + pinctrl-names = "default"; vmmc-supply = <&vemmc_reg>; status = "okay"; }; @@ -73,12 +64,74 @@ status = "okay"; }; + gpio-keys { + compatible = "gpio-keys"; + + vol-down-key { + gpios = <&gpx2 1 1>; + linux,code = <114>; + label = "volume down"; + debounce-interval = <10>; + }; + + vol-up-key { + gpios = <&gpx2 0 1>; + linux,code = <115>; + label = "volume up"; + debounce-interval = <10>; + }; + + power-key { + gpios = <&gpx2 7 1>; + linux,code = <116>; + label = "power"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + + ok-key { + gpios = <&gpx3 5 1>; + linux,code = <352>; + label = "ok"; + debounce-interval = <10>; + }; + }; + + tsp_reg: voltage-regulator { + compatible = "regulator-fixed"; + regulator-name = "TSP_FIXED_VOLTAGES"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpl0 3 0>; + enable-active-high; + }; + + i2c@13890000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <400000>; + pinctrl-0 = <&i2c3_bus>; + pinctrl-names = "default"; + status = "okay"; + + mms114-touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpx0>; + interrupts = <4 2>; + x-size = <720>; + y-size = <1280>; + avdd-supply = <&tsp_reg>; + vdd-supply = <&tsp_reg>; + }; + }; + i2c@138B0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-slave-addr = <0x10>; samsung,i2c-max-bus-freq = <100000>; - gpios = <&gpb 6 3 3 0>, - <&gpb 7 3 3 0>; + pinctrl-0 = <&i2c5_bus>; + pinctrl-names = "default"; status = "okay"; max8997_pmic@66 { @@ -93,9 +146,9 @@ max8997,pmic-ignore-gpiodvs-side-effect; max8997,pmic-buck125-default-dvs-idx = <0>; - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>, - <&gpx0 6 1 0 0>, - <&gpl0 0 1 0 0>; + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, + <&gpx0 6 0>, + <&gpl0 0 0>; max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, <1250000>, <1200000>, diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 214c557eda7f..e31bfc4a6f09 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -31,6 +31,11 @@ pinctrl2 = &pinctrl_2; }; + pd_lcd1: lcd1-power-domain@10023CA0 { + compatible = "samsung,exynos4210-pd"; + reg = <0x10023CA0 0x20>; + }; + gic:interrupt-controller@10490000 { cpu-offset = <0x8000>; }; @@ -46,27 +51,17 @@ compatible = "samsung,pinctrl-exynos4210"; reg = <0x11400000 0x1000>; interrupts = <0 47 0>; - interrupt-controller; - #interrupt-cells = <2>; }; pinctrl_1: pinctrl@11000000 { compatible = "samsung,pinctrl-exynos4210"; reg = <0x11000000 0x1000>; interrupts = <0 46 0>; - interrupt-controller; - #interrupt-cells = <2>; wakup_eint: wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; interrupt-parent = <&gic>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, - <0 32 0>; + interrupts = <0 32 0>; }; }; @@ -75,232 +70,10 @@ reg = <0x03860000 0x1000>; }; - gpio-controllers { - #address-cells = <1>; - #size-cells = <1>; - gpio-controller; - ranges; - - gpa0: gpio-controller@11400000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400000 0x20>; - #gpio-cells = <4>; - }; - - gpa1: gpio-controller@11400020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400020 0x20>; - #gpio-cells = <4>; - }; - - gpb: gpio-controller@11400040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400040 0x20>; - #gpio-cells = <4>; - }; - - gpc0: gpio-controller@11400060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400060 0x20>; - #gpio-cells = <4>; - }; - - gpc1: gpio-controller@11400080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400080 0x20>; - #gpio-cells = <4>; - }; - - gpd0: gpio-controller@114000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000A0 0x20>; - #gpio-cells = <4>; - }; - - gpd1: gpio-controller@114000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000C0 0x20>; - #gpio-cells = <4>; - }; - - gpe0: gpio-controller@114000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114000E0 0x20>; - #gpio-cells = <4>; - }; - - gpe1: gpio-controller@11400100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400100 0x20>; - #gpio-cells = <4>; - }; - - gpe2: gpio-controller@11400120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400120 0x20>; - #gpio-cells = <4>; - }; - - gpe3: gpio-controller@11400140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400140 0x20>; - #gpio-cells = <4>; - }; - - gpe4: gpio-controller@11400160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400160 0x20>; - #gpio-cells = <4>; - }; - - gpf0: gpio-controller@11400180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11400180 0x20>; - #gpio-cells = <4>; - }; - - gpf1: gpio-controller@114001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001A0 0x20>; - #gpio-cells = <4>; - }; - - gpf2: gpio-controller@114001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001C0 0x20>; - #gpio-cells = <4>; - }; - - gpf3: gpio-controller@114001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x114001E0 0x20>; - #gpio-cells = <4>; - }; - - gpj0: gpio-controller@11000000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000000 0x20>; - #gpio-cells = <4>; - }; - - gpj1: gpio-controller@11000020 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000020 0x20>; - #gpio-cells = <4>; - }; - - gpk0: gpio-controller@11000040 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000040 0x20>; - #gpio-cells = <4>; - }; - - gpk1: gpio-controller@11000060 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000060 0x20>; - #gpio-cells = <4>; - }; - - gpk2: gpio-controller@11000080 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000080 0x20>; - #gpio-cells = <4>; - }; - - gpk3: gpio-controller@110000A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000A0 0x20>; - #gpio-cells = <4>; - }; - - gpl0: gpio-controller@110000C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000C0 0x20>; - #gpio-cells = <4>; - }; - - gpl1: gpio-controller@110000E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110000E0 0x20>; - #gpio-cells = <4>; - }; - - gpl2: gpio-controller@11000100 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000100 0x20>; - #gpio-cells = <4>; - }; - - gpy0: gpio-controller@11000120 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000120 0x20>; - #gpio-cells = <4>; - }; - - gpy1: gpio-controller@11000140 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000140 0x20>; - #gpio-cells = <4>; - }; - - gpy2: gpio-controller@11000160 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000160 0x20>; - #gpio-cells = <4>; - }; - - gpy3: gpio-controller@11000180 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000180 0x20>; - #gpio-cells = <4>; - }; - - gpy4: gpio-controller@110001A0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001A0 0x20>; - #gpio-cells = <4>; - }; - - gpy5: gpio-controller@110001C0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001C0 0x20>; - #gpio-cells = <4>; - }; - - gpy6: gpio-controller@110001E0 { - compatible = "samsung,exynos4-gpio"; - reg = <0x110001E0 0x20>; - #gpio-cells = <4>; - }; - - gpx0: gpio-controller@11000C00 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C00 0x20>; - #gpio-cells = <4>; - }; - - gpx1: gpio-controller@11000C20 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C20 0x20>; - #gpio-cells = <4>; - }; - - gpx2: gpio-controller@11000C40 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C40 0x20>; - #gpio-cells = <4>; - }; - - gpx3: gpio-controller@11000C60 { - compatible = "samsung,exynos4-gpio"; - reg = <0x11000C60 0x20>; - #gpio-cells = <4>; - }; - - gpz: gpio-controller@03860000 { - compatible = "samsung,exynos4-gpio"; - reg = <0x03860000 0x20>; - #gpio-cells = <4>; - }; + tmu@100C0000 { + compatible = "samsung,exynos4210-tmu"; + interrupt-parent = <&combiner>; + reg = <0x100C0000 0x100>; + interrupts = <2 4>; }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi new file mode 100644 index 000000000000..c6ae2005961f --- /dev/null +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -0,0 +1,28 @@ +/* + * Samsung's Exynos4212 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "exynos4x12.dtsi" + +/ { + compatible = "samsung,exynos4212"; + + gic:interrupt-controller@10490000 { + cpu-offset = <0x8000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts new file mode 100644 index 000000000000..f05bf575cc45 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts @@ -0,0 +1,45 @@ +/* + * Samsung's Exynos4412 based SMDK board device tree source + * + * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's SMDK4412 board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4412.dtsi" + +/ { + model = "Samsung SMDK evaluation board based on Exynos4412"; + compatible = "samsung,smdk4412", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + chosen { + bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi new file mode 100644 index 000000000000..d7dfe312772a --- /dev/null +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -0,0 +1,28 @@ +/* + * Samsung's Exynos4412 SoC device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4412 SoC device nodes are listed in this file. Exynos4412 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "exynos4x12.dtsi" + +/ { + compatible = "samsung,exynos4412"; + + gic:interrupt-controller@10490000 { + cpu-offset = <0x4000>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi new file mode 100644 index 000000000000..8e6115adcd97 --- /dev/null +++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi @@ -0,0 +1,965 @@ +/* + * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_a: uart-audio-a { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_b: uart-audio-b { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-0", "gpb-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi0_clk: mipi0-clk { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + mipi1_clk: mipi1-clk { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data16: lcd-data-width16 { + samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2", + "gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0", + "gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data18: lcd-data-width18 { + samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1", + "gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1", + "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_ldi: lcd-ldi { + samsung,pins = "gpf3-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a: cam-port-a { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3", + "gpj1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@11000000 { + gpk0: gpk0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk1: gpk1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk2: gpk2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpk3: gpk3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl0: gpl0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl1: gpl1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpl2: gpl2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm0: gpm0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm1: gpm1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm2: gpm2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm3: gpm3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpm4: gpm4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpy0: gpy0 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy1: gpy1 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy2: gpy2 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy3: gpy3 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy4: gpy4 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy5: gpy5 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpy6: gpy6 { + gpio-controller; + #gpio-cells = <2>; + }; + + gpx0: gpx0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>; + #interrupt-cells = <2>; + }; + + gpx1: gpx1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + interrupt-parent = <&gic>; + interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; + #interrupt-cells = <2>; + }; + + gpx2: gpx2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpx3: gpx3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_clk: sd4-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd4_cmd: sd4-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd4_cd: sd4-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_bus1: sd4-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_bus4: sd4-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd4_bus8: sd4-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <4>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpk3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpk3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpk3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpk3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + + keypad_col0: keypad-col0 { + samsung,pins = "gpl2-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col1: keypad-col1 { + samsung,pins = "gpl2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col2: keypad-col2 { + samsung,pins = "gpl2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col3: keypad-col3 { + samsung,pins = "gpl2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col4: keypad-col4 { + samsung,pins = "gpl2-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col5: keypad-col5 { + samsung,pins = "gpl2-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col6: keypad-col6 { + samsung,pins = "gpl2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col7: keypad-col7 { + samsung,pins = "gpl2-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_b: cam-port-b { + samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3", + "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7", + "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1", + "gpm2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + eint0: ext-int0 { + samsung,pins = "gpx0-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint8: ext-int8 { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint15: ext-int15 { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint16: ext-int16 { + samsung,pins = "gpx2-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint31: ext-int31 { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@03860000 { + gpz: gpz { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4"; + samsung,pin-function = <0x3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@106E0000 { + gpv0: gpv0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv1: gpv1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv2: gpv2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv3: gpv3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv4: gpv4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + c2c_bus: c2c-bus { + samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3", + "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7", + "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3", + "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7", + "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3", + "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7", + "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3", + "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7", + "gpv4-0", "gpv4-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi new file mode 100644 index 000000000000..179a62e46c9d --- /dev/null +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -0,0 +1,69 @@ +/* + * Samsung's Exynos4x12 SoCs device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/include/ "exynos4.dtsi" +/include/ "exynos4x12-pinctrl.dtsi" + +/ { + aliases { + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; + pinctrl3 = &pinctrl_3; + }; + + combiner:interrupt-controller@10440000 { + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, + <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>; + }; + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + }; + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupts = <0 32 0>; + }; + }; + + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x03860000 0x1000>; + interrupt-parent = <&combiner>; + interrupts = <10 0>; + }; + + pinctrl_3: pinctrl@106E0000 { + compatible = "samsung,pinctrl-exynos4x12"; + reg = <0x106E0000 0x1000>; + interrupts = <0 72 0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index a352df403b7a..942d5761ca97 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -17,10 +17,6 @@ compatible = "samsung,smdk5250", "samsung,exynos5250"; aliases { - mshc0 = &dwmmc_0; - mshc1 = &dwmmc_1; - mshc2 = &dwmmc_2; - mshc3 = &dwmmc_3; }; memory { @@ -55,8 +51,31 @@ }; }; + i2c@121D0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <40000>; + samsung,i2c-slave-addr = <0x38>; + + sata-phy { + compatible = "samsung,sata-phy"; + reg = <0x38>; + }; + }; + + sata@122F0000 { + samsung,sata-freq = <66>; + }; + i2c@12C80000 { - status = "disabled"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + gpios = <&gpa0 6 3 3 0>, + <&gpa0 7 3 3 0>; + + hdmiddc@50 { + compatible = "samsung,exynos5-hdmiddc"; + reg = <0x50>; + }; }; i2c@12C90000 { @@ -79,7 +98,17 @@ status = "disabled"; }; - dwmmc_0: dwmmc0@12200000 { + i2c@12CE0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiphy@38 { + compatible = "samsung,exynos5-hdmiphy"; + reg = <0x38>; + }; + }; + + dwmmc0@12200000 { num-slots = <1>; supports-highspeed; broken-cd; @@ -100,11 +129,11 @@ }; }; - dwmmc_1: dwmmc1@12210000 { + dwmmc1@12210000 { status = "disabled"; }; - dwmmc_2: dwmmc2@12220000 { + dwmmc2@12220000 { num-slots = <1>; supports-highspeed; fifo-depth = <0x80>; @@ -125,7 +154,7 @@ }; }; - dwmmc_3: dwmmc3@12230000 { + dwmmc3@12230000 { status = "disabled"; }; @@ -166,4 +195,13 @@ spi_2: spi@12d40000 { status = "disabled"; }; + + hdmi { + hpd-gpio = <&gpx3 7 0xf 1 3>; + }; + + codec@11000000 { + samsung,mfc-r = <0x43000000 0x800000>; + samsung,mfc-l = <0x51000000 0x800000>; + }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts new file mode 100644 index 000000000000..17dd951c1cd2 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -0,0 +1,43 @@ +/* + * Google Snow board device tree source + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos5250.dtsi" +/include/ "cros5250-common.dtsi" + +/ { + model = "Google Snow"; + compatible = "google,snow", "samsung,exynos5250"; + + gpio-keys { + compatible = "gpio-keys"; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 0 0x10000 0>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + /* + * On Snow we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ + dwmmc3@12230000 { + slot@0 { + gpios = <&gpc4 0 2 0 0>, <&gpc4 1 2 3 0>, + <&gpc4 3 2 3 0>, <&gpc4 4 2 3 0>, + <&gpc4 5 2 3 0>, <&gpc4 6 2 3 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index dddfd6e444dc..36d8246ea50e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -31,6 +31,10 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; + mshc0 = &dwmmc_0; + mshc1 = &dwmmc_1; + mshc2 = &dwmmc_2; + mshc3 = &dwmmc_3; }; gic:interrupt-controller@10481000 { @@ -62,12 +66,24 @@ interrupts = <0 42 0>; }; + codec@11000000 { + compatible = "samsung,mfc-v6"; + reg = <0x11000000 0x10000>; + interrupts = <0 96 0>; + }; + rtc { compatible = "samsung,s3c6410-rtc"; reg = <0x101E0000 0x100>; interrupts = <0 43 0>, <0 44 0>; }; + tmu@10060000 { + compatible = "samsung,exynos5250-tmu"; + reg = <0x10060000 0x100>; + interrupts = <0 65 0>; + }; + serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; @@ -92,6 +108,17 @@ interrupts = <0 54 0>; }; + sata@122F0000 { + compatible = "samsung,exynos5-sata-ahci"; + reg = <0x122F0000 0x1ff>; + interrupts = <0 115 0>; + }; + + sata-phy@12170000 { + compatible = "samsung,exynos5-sata-phy"; + reg = <0x12170000 0x1ff>; + }; + i2c@12C60000 { compatible = "samsung,s3c2440-i2c"; reg = <0x12C60000 0x100>; @@ -156,6 +183,21 @@ #size-cells = <0>; }; + i2c@12CE0000 { + compatible = "samsung,s3c2440-hdmiphy-i2c"; + reg = <0x12CE0000 0x1000>; + interrupts = <0 64 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@121D0000 { + compatible = "samsung,exynos5-sata-phy-i2c"; + reg = <0x121D0000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + }; + spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; @@ -186,7 +228,7 @@ #size-cells = <0>; }; - dwmmc0@12200000 { + dwmmc_0: dwmmc0@12200000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12200000 0x1000>; interrupts = <0 75 0>; @@ -194,7 +236,7 @@ #size-cells = <0>; }; - dwmmc1@12210000 { + dwmmc_1: dwmmc1@12210000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12210000 0x1000>; interrupts = <0 76 0>; @@ -202,7 +244,7 @@ #size-cells = <0>; }; - dwmmc2@12220000 { + dwmmc_2: dwmmc2@12220000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12220000 0x1000>; interrupts = <0 77 0>; @@ -210,7 +252,7 @@ #size-cells = <0>; }; - dwmmc3@12230000 { + dwmmc_3: dwmmc3@12230000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12230000 0x1000>; interrupts = <0 78 0>; @@ -520,4 +562,16 @@ reg = <0x13e30000 0x1000>; interrupts = <0 88 0>; }; + + hdmi { + compatible = "samsung,exynos5-hdmi"; + reg = <0x14530000 0x100000>; + interrupts = <0 95 0>; + }; + + mixer { + compatible = "samsung,exynos5-mixer"; + reg = <0x14450000 0x10000>; + interrupts = <0 94 0>; + }; }; diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi new file mode 100644 index 000000000000..592fb9dc35bd --- /dev/null +++ b/arch/arm/boot/dts/href.dtsi @@ -0,0 +1,273 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "dbx5x0.dtsi" + +/ { + memory { + reg = <0x00000000 0x20000000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + linux,code = <11>; + label = "SFH7741 Proximity Sensor"; + }; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + i2c@80004000 { + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + compatible = "lp5521"; + reg = <0x33>; + }; + + lp5521@0x34 { + compatible = "lp5521"; + reg = <0x34>; + }; + + bh1780@0x29 { + compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&tc3589x_gpio 3 0x4>; + + status = "okay"; + }; + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // PoP:ed eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; + + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts new file mode 100644 index 000000000000..eec29c4a86dc --- /dev/null +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -0,0 +1,48 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" +/include/ "href.dtsi" +/include/ "stuib.dtsi" + +/ { + model = "ST-Ericsson HREF (pre-v60) platform with Device Tree"; + compatible = "st-ericsson,mop500", "st-ericsson,u8500"; + + gpio_keys { + button@1 { + gpios = <&tc3589x_gpio 7 0x4>; + }; + }; + + soc-u9500 { + i2c@80004000 { + tps61052@33 { + compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80110000 { + bu21013_tp@0x5c { + reset-gpio = <&tc3589x_gpio 13 0x4>; + }; + }; + + vmmci: regulator-gpio { + gpios = <&tc3589x_gpio 18 0x4>; + gpio-enable = <&tc3589x_gpio 17 0x4>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts index 2131d77dc9c9..55f4191a626e 100644 --- a/arch/arm/boot/dts/hrefv60plus.dts +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -11,85 +11,200 @@ /dts-v1/; /include/ "dbx5x0.dtsi" +/include/ "href.dtsi" +/include/ "stuib.dtsi" / { - model = "ST-Ericsson HREF platform with Device Tree"; - compatible = "st-ericsson,hrefv60+"; + model = "ST-Ericsson HREF (v60+) platform with Device Tree"; + compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - memory { - reg = <0x00000000 0x20000000>; + gpio_keys { + button@1 { + gpios = <&gpio6 25 0x4>; + }; }; soc-u9500 { - uart@80120000 { + i2c@80110000 { + bu21013_tp@0x5c { + reset-gpio = <&gpio4 15 0x4>; + }; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&tc3589x_gpio 3 0x4>; + status = "okay"; }; - uart@80121000 { + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + status = "okay"; }; - uart@80007000 { + // PoP:ed eMMC + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + status = "okay"; }; - i2c@80004000 { - tc3589x@42 { - compatible = "tc3589x"; - reg = <0x42>; - interrupt-parent = <&gpio6>; - interrupts = <25 0x1>; + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; - interrupt-controller; - #interrupt-cells = <2>; + status = "okay"; + }; - tc3589x_gpio: tc3589x_gpio { - compatible = "tc3589x-gpio"; - interrupts = <0 0x1>; + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; - interrupt-controller; - #interrupt-cells = <2>; - gpio-controller; - #gpio-cells = <2>; + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; }; - }; - tps61052@33 { - compatible = "tps61052"; - reg = <0x33>; - }; - }; + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; - i2c@80128000 { - lp5521@0x33 { - compatible = "lp5521"; - reg = <0x33>; - }; + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; - lp5521@0x34 { - compatible = "lp5521"; - reg = <0x34>; - }; + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; - bh1780@0x29 { - compatible = "rohm,bh1780gli"; - reg = <0x33>; + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; }; - }; - sound { - compatible = "stericsson,snd-soc-mop500"; + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; - stericsson,cpu-dai = <&msp1 &msp3>; - stericsson,audio-codec = <&codec>; - }; + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; - msp1: msp@80124000 { - status = "okay"; - }; + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; - msp3: msp@80125000 { - status = "okay"; + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 384d8b66f337..7c43b8e70b9f 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -40,6 +40,15 @@ reg = <0>; fsl,pinmux-ids = < 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + led_pin_gpio0_17: led_gpio0_17@0 { + reg = <0>; + fsl,pinmux-ids = < 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ >; fsl,drive-strength = <0>; @@ -47,6 +56,15 @@ fsl,pull-up = <0>; }; }; + + ssp1: ssp@80034000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx23-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + }; }; apbx@80040000 { @@ -91,11 +109,12 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio0_17>; user { label = "green"; - gpios = <&gpio2 1 0>; - linux,default-trigger = "default-on"; + gpios = <&gpio2 1 1>; }; }; }; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 6d31aa383460..65415c598a5e 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -279,6 +279,19 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + spi2_pins_a: spi2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0182 /* MX23_PAD_GPMI_WRN__SSP2_SCK */ + 0x0142 /* MX23_PAD_GPMI_RDY1__SSP2_CMD */ + 0x0002 /* MX23_PAD_GPMI_D00__SSP2_DATA0 */ + 0x0032 /* MX23_PAD_GPMI_D03__SSP2_DATA3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; }; digctl@8001c000 { diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts new file mode 100644 index 000000000000..d81f8a0b9794 --- /dev/null +++ b/arch/arm/boot/dts/imx25-karo-tx25.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx25.dtsi" + +/ { + model = "Ka-Ro TX25"; + compatible = "karo,imx25-tx25", "fsl,imx25"; + + memory { + reg = <0x80000000 0x02000000 0x90000000 0x02000000>; + }; + + soc { + aips@43f00000 { + uart1: serial@43f90000 { + status = "okay"; + }; + }; + + spba@50000000 { + fec: ethernet@50038000 { + status = "okay"; + phy-mode = "rmii"; + }; + }; + + emi@80000000 { + nand@bb000000 { + nand-on-flash-bbt; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi new file mode 100644 index 000000000000..e1b13ebc96d6 --- /dev/null +++ b/arch/arm/boot/dts/imx25.dtsi @@ -0,0 +1,515 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + usb0 = &usbotg; + usb1 = &usbhost1; + }; + + asic: asic-interrupt-controller@68000000 { + compatible = "fsl,imx25-asic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x68000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc { + compatible = "fsl,imx-osc", "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&asic>; + ranges; + + aips@43f00000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x43f00000 0x100000>; + ranges; + + i2c1: i2c@43f80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f80000 0x4000>; + clocks = <&clks 48>; + clock-names = ""; + interrupts = <3>; + status = "disabled"; + }; + + i2c3: i2c@43f84000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f84000 0x4000>; + clocks = <&clks 48>; + clock-names = ""; + interrupts = <10>; + status = "disabled"; + }; + + can1: can@43f88000 { + compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + reg = <0x43f88000 0x4000>; + interrupts = <43>; + clocks = <&clks 75>, <&clks 75>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can2: can@43f8c000 { + compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan"; + reg = <0x43f8c000 0x4000>; + interrupts = <44>; + clocks = <&clks 76>, <&clks 76>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@43f90000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + clocks = <&clks 120>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart2: serial@43f94000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x43f94000 0x4000>; + interrupts = <32>; + clocks = <&clks 121>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + i2c2: i2c@43f98000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-i2c", "fsl,imx21-i2c"; + reg = <0x43f98000 0x4000>; + clocks = <&clks 48>; + clock-names = ""; + interrupts = <4>; + status = "disabled"; + }; + + owire@43f9c000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x43f9c000 0x4000>; + clocks = <&clks 51>; + clock-names = ""; + interrupts = <2>; + status = "disabled"; + }; + + spi1: cspi@43fa4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x43fa4000 0x4000>; + clocks = <&clks 62>; + clock-names = "ipg"; + interrupts = <14>; + status = "disabled"; + }; + + kpp@43fa8000 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x43fa8000 0x4000>; + clocks = <&clks 102>; + clock-names = ""; + interrupts = <24>; + status = "disabled"; + }; + + iomuxc@43fac000{ + compatible = "fsl,imx25-iomuxc"; + reg = <0x43fac000 0x4000>; + }; + + audmux@43fb0000 { + compatible = "fsl,imx25-audmux", "fsl,imx31-audmux"; + reg = <0x43fb0000 0x4000>; + status = "disabled"; + }; + }; + + spba@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x40000>; + ranges; + + spi3: cspi@50004000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x50004000 0x4000>; + interrupts = <0>; + clocks = <&clks 80>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart4: serial@50008000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x50008000 0x4000>; + interrupts = <5>; + clocks = <&clks 123>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart3: serial@5000c000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <18>; + clocks = <&clks 122>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + spi2: cspi@50010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx25-cspi", "fsl,imx35-cspi"; + reg = <0x50010000 0x4000>; + clocks = <&clks 79>; + clock-names = "ipg"; + interrupts = <13>; + status = "disabled"; + }; + + ssi2: ssi@50014000 { + compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; + reg = <0x50014000 0x4000>; + interrupts = <11>; + status = "disabled"; + }; + + esai@50018000 { + reg = <0x50018000 0x4000>; + interrupts = <7>; + }; + + uart5: serial@5002c000 { + compatible = "fsl,imx25-uart", "fsl,imx21-uart"; + reg = <0x5002c000 0x4000>; + interrupts = <40>; + clocks = <&clks 124>, <&clks 57>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + tsc: tsc@50030000 { + compatible = "fsl,imx25-adc", "fsl,imx21-tsc"; + reg = <0x50030000 0x4000>; + interrupts = <46>; + clocks = <&clks 119>; + clock-names = "ipg"; + status = "disabled"; + }; + + ssi1: ssi@50034000 { + compatible = "fsl,imx25-ssi", "fsl,imx21-ssi"; + reg = <0x50034000 0x4000>; + interrupts = <12>; + status = "disabled"; + }; + + fec: ethernet@50038000 { + compatible = "fsl,imx25-fec"; + reg = <0x50038000 0x4000>; + interrupts = <57>; + clocks = <&clks 88>, <&clks 65>; + clock-names = "ipg", "ahb"; + status = "disabled"; + }; + }; + + aips@53f00000 { /* AIPS2 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x53f00000 0x100000>; + ranges; + + clks: ccm@53f80000 { + compatible = "fsl,imx25-ccm"; + reg = <0x53f80000 0x4000>; + interrupts = <31>; + #clock-cells = <1>; + }; + + gpt4: timer@53f84000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f84000 0x4000>; + clocks = <&clks 9>, <&clks 45>; + clock-names = "ipg", "per"; + interrupts = <1>; + }; + + gpt3: timer@53f88000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f88000 0x4000>; + clocks = <&clks 9>, <&clks 47>; + clock-names = "ipg", "per"; + interrupts = <29>; + }; + + gpt2: timer@53f8c000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f8c000 0x4000>; + clocks = <&clks 9>, <&clks 47>; + clock-names = "ipg", "per"; + interrupts = <53>; + }; + + gpt1: timer@53f90000 { + compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; + reg = <0x53f90000 0x4000>; + clocks = <&clks 9>, <&clks 47>; + clock-names = "ipg", "per"; + interrupts = <54>; + }; + + epit1: timer@53f94000 { + compatible = "fsl,imx25-epit"; + reg = <0x53f94000 0x4000>; + interrupts = <28>; + }; + + epit2: timer@53f98000 { + compatible = "fsl,imx25-epit"; + reg = <0x53f98000 0x4000>; + interrupts = <27>; + }; + + gpio4: gpio@53f9c000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53f9c000 0x4000>; + interrupts = <23>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm2: pwm@53fa0000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fa0000 0x4000>; + clocks = <&clks 106>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <36>; + }; + + gpio3: gpio@53fa4000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fa4000 0x4000>; + interrupts = <16>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm3: pwm@53fa8000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fa8000 0x4000>; + clocks = <&clks 107>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <41>; + }; + + esdhc1: esdhc@53fb4000 { + compatible = "fsl,imx25-esdhc"; + reg = <0x53fb4000 0x4000>; + interrupts = <9>; + clocks = <&clks 86>, <&clks 63>, <&clks 45>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + esdhc2: esdhc@53fb8000 { + compatible = "fsl,imx25-esdhc"; + reg = <0x53fb8000 0x4000>; + interrupts = <8>; + clocks = <&clks 87>, <&clks 64>, <&clks 46>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + lcdc@53fbc000 { + reg = <0x53fbc000 0x4000>; + interrupts = <39>; + clocks = <&clks 103>, <&clks 66>, <&clks 49>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + slcdc@53fc0000 { + reg = <0x53fc0000 0x4000>; + interrupts = <38>; + status = "disabled"; + }; + + pwm4: pwm@53fc8000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + reg = <0x53fc8000 0x4000>; + clocks = <&clks 108>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <42>; + }; + + gpio1: gpio@53fcc000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fcc000 0x4000>; + interrupts = <52>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@53fd0000 { + compatible = "fsl,imx25-gpio", "fsl,imx35-gpio"; + reg = <0x53fd0000 0x4000>; + interrupts = <51>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sdma@53fd4000 { + compatible = "fsl,imx25-sdma", "fsl,imx35-sdma"; + reg = <0x53fd4000 0x4000>; + clocks = <&clks 112>, <&clks 68>; + clock-names = "ipg", "ahb"; + interrupts = <34>; + }; + + wdog@53fdc000 { + compatible = "fsl,imx25-wdt", "fsl,imx21-wdt"; + reg = <0x53fdc000 0x4000>; + clocks = <&clks 126>; + clock-names = ""; + interrupts = <55>; + }; + + pwm1: pwm@53fe0000 { + compatible = "fsl,imx25-pwm", "fsl,imx27-pwm"; + #pwm-cells = <2>; + reg = <0x53fe0000 0x4000>; + clocks = <&clks 105>, <&clks 36>; + clock-names = "ipg", "per"; + interrupts = <26>; + }; + + usbphy1: usbphy@1 { + compatible = "nop-usbphy"; + status = "disabled"; + }; + + usbphy2: usbphy@2 { + compatible = "nop-usbphy"; + status = "disabled"; + }; + + usbotg: usb@53ff4000 { + compatible = "fsl,imx25-usb", "fsl,imx27-usb"; + reg = <0x53ff4000 0x0200>; + interrupts = <37>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; + fsl,usbmisc = <&usbmisc 0>; + status = "disabled"; + }; + + usbhost1: usb@53ff4400 { + compatible = "fsl,imx25-usb", "fsl,imx27-usb"; + reg = <0x53ff4400 0x0200>; + interrupts = <35>; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbmisc: usbmisc@53ff4600 { + #index-cells = <1>; + compatible = "fsl,imx25-usbmisc"; + clocks = <&clks 9>, <&clks 70>, <&clks 8>; + clock-names = "ipg", "ahb", "per"; + reg = <0x53ff4600 0x00f>; + status = "disabled"; + }; + + dryice@53ffc000 { + compatible = "fsl,imx25-dryice", "fsl,imx25-rtc"; + reg = <0x53ffc000 0x4000>; + clocks = <&clks 81>; + clock-names = "ipg"; + interrupts = <25>; + }; + }; + + emi@80000000 { + compatible = "fsl,emi-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80000000 0x3b002000>; + ranges; + + nand@bb000000 { + #address-cells = <1>; + #size-cells = <1>; + + compatible = "fsl,imx25-nand"; + reg = <0xbb000000 0x2000>; + clocks = <&clks 50>; + clock-names = ""; + interrupts = <33>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts new file mode 100644 index 000000000000..c0327c054de2 --- /dev/null +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -0,0 +1,89 @@ +/* + * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr> + * Copyright 2012 Armadeus Systems <support@armadeus.com> + * + * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx27.dtsi" + +/ { + model = "Armadeus Systems APF27 module"; + compatible = "armadeus,imx27-apf27", "fsl,imx27"; + + memory { + reg = <0xa0000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc26m { + compatible = "fsl,imx-osc26m", "fixed-clock"; + clock-frequency = <0>; + }; + }; + + soc { + aipi@10000000 { + serial@1000a000 { + status = "okay"; + }; + + ethernet@1002b000 { + status = "okay"; + }; + }; + + nand@d8000000 { + status = "okay"; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "env2"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "firmware"; + reg = <0x200000 0x80000>; + }; + + partition@280000 { + label = "dtb"; + reg = <0x280000 0x80000>; + }; + + partition@300000 { + label = "kernel"; + reg = <0x300000 0x500000>; + }; + + partition@800000 { + label = "rootfs"; + reg = <0x800000 0xf800000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 67d672792b0d..b8d3905915ac 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -58,7 +58,7 @@ reg = <0x10000000 0x10000000>; ranges; - wdog@10002000 { + wdog: wdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x4000>; interrupts = <27>; @@ -218,7 +218,8 @@ status = "disabled"; }; }; - nand@d8000000 { + + nfc: nand@d8000000 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts new file mode 100644 index 000000000000..7eb075876c4c --- /dev/null +++ b/arch/arm/boot/dts/imx28-apf28.dts @@ -0,0 +1,85 @@ +/* + * Copyright 2012 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Armadeus Systems APF28 module"; + compatible = "armadeus,imx28-apf28", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; + + partition@300000 { + label = "env"; + reg = <0x300000 0x80000>; + }; + + partition@380000 { + label = "env2"; + reg = <0x380000 0x80000>; + }; + + partition@400000 { + label = "dtb"; + reg = <0x400000 0x80000>; + }; + + partition@480000 { + label = "splash"; + reg = <0x480000 0x80000>; + }; + + partition@500000 { + label = "kernel"; + reg = <0x500000 0x800000>; + }; + + partition@d00000 { + label = "rootfs"; + reg = <0xd00000 0xf300000>; + }; + }; + }; + + apbx@80040000 { + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio4 13 0>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts new file mode 100644 index 000000000000..6d8865bfb4b7 --- /dev/null +++ b/arch/arm/boot/dts/imx28-apf28dev.dts @@ -0,0 +1,154 @@ +/* + * Copyright 2012 Armadeus Systems - <support@armadeus.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* APF28Dev is a docking board for the APF28 SOM */ +/include/ "imx28-apf28.dts" + +/ { + model = "Armadeus Systems APF28Dev docking/development board"; + compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_apf28dev>; + + hog_pins_apf28dev: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1103 /* MX28_PAD_LCD_D16__GPIO_1_16 */ + 0x1113 /* MX28_PAD_LCD_D17__GPIO_1_17 */ + 0x1123 /* MX28_PAD_LCD_D18__GPIO_1_18 */ + 0x1133 /* MX28_PAD_LCD_D19__GPIO_1_19 */ + 0x1143 /* MX28_PAD_LCD_D20__GPIO_1_20 */ + 0x1153 /* MX28_PAD_LCD_D21__GPIO_1_21 */ + 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_apf28dev: lcdif-apf28dev@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_16bit_pins_a + &lcdif_pins_apf28dev>; + status = "okay"; + }; + }; + + apbx@80040000 { + lradc@80050000 { + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + + usb1: usb@80090000 { + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + phy-reset-gpios = <&gpio0 23 0>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 23 1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio0 21 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + + pwms = <&pwm 3 191000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index c03a577beca3..1594694532b9 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -22,6 +22,31 @@ apb@80000000 { apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_cfa10036>; + + hog_pins_cfa10036: hog-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + led_pins_cfa10036: leds-10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3043 /* MX28_PAD_AUART1_RX__GPIO_3_4 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -33,16 +58,37 @@ }; apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm4_pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_b>; status = "okay"; }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_b>; + status = "okay"; + + ssd1307: oled@3c { + compatible = "solomon,ssd1307fb-i2c"; + reg = <0x3c>; + pwms = <&pwm 4 3000>; + reset-gpios = <&gpio2 7 0>; + }; + }; }; }; leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_cfa10036>; power { gpios = <&gpio3 4 1>; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index 05c892e931e3..b222614ac9e0 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -22,6 +22,22 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10049>; + + hog_pins_cfa10049: hog-10049@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ + 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ + 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + spi3_pins_cfa10049: spi3-cfa10049@0 { reg = <0>; fsl,pinmux-ids = < @@ -29,6 +45,7 @@ 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ + 0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */ >; fsl,drive-strength = <1>; fsl,voltage = <1>; @@ -60,6 +77,11 @@ spi-max-frequency = <100000>; }; + dac0: dh2228@2 { + compatible = "rohm,dh2228fv"; + reg = <2>; + spi-max-frequency = <100000>; + }; }; }; @@ -96,4 +118,15 @@ gpio = <&gpio0 7 1>; }; }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; }; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index a0ad71ca3a44..2da316e04409 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -76,7 +76,6 @@ 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ - 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ >; @@ -85,6 +84,16 @@ fsl,pull-up = <0>; }; + led_pin_gpio3_5: led_gpio3_5@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + gpmi_pins_evk: gpmi-nand-evk@0 { reg = <0>; fsl,pinmux-ids = < @@ -288,6 +297,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio3_5>; user { label = "Heartbeat"; diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts new file mode 100644 index 000000000000..e6cde8aa7fff --- /dev/null +++ b/arch/arm/boot/dts/imx28-sps1.dts @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2012 Marek Vasut <marex@denx.de> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "SchulerControl GmbH, SC SPS 1"; + compatible = "schulercontrol,imx28-sps1", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0003 /* MX28_PAD_GPMI_D00__GPIO_0_0 */ + 0x0033 /* MX28_PAD_GPMI_D03__GPIO_0_3 */ + 0x0063 /* MX28_PAD_GPMI_D06__GPIO_0_6 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256", "mr25h256"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; + status = "okay"; + + rtc: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom: eeprom@52 { + compatible = "atmel,24c64"; + reg = <0x52>; + pagesize = <32>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy0_pins_b>; + status = "okay"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + compatible = "gpio-leds"; + status = "okay"; + + led@1 { + label = "sps1-1:yellow:user"; + gpios = <&gpio0 6 0>; + linux,default-trigger = "heartbeat"; + reg = <0>; + }; + + led@2 { + label = "sps1-2:red:user"; + gpios = <&gpio0 3 0>; + linux,default-trigger = "heartbeat"; + reg = <1>; + }; + + led@3 { + label = "sps1-3:red:user"; + gpios = <&gpio0 0 0>; + default-trigger = "heartbeat"; + reg = <2>; + }; + + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 55c57ea6169e..d7013f73f2e9 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -492,6 +492,16 @@ fsl,pull-up = <0>; }; + pwm3_pins_a: pwm3@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c0 /* MX28_PAD_PWM3__PWM_3 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + pwm4_pins_a: pwm4@0 { reg = <0>; fsl,pinmux-ids = < @@ -535,6 +545,31 @@ fsl,pull-up = <0>; }; + lcdif_16bit_pins_a: lcdif-16bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + can0_pins_a: can0@0 { reg = <0>; fsl,pinmux-ids = < diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 54aea74769a1..1fdee31b4909 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -76,17 +76,18 @@ reg = <0x70000000 0x40000>; ranges; - esdhc@70004000 { /* ESDHC1 */ + esdhc1: esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; status = "disabled"; }; - esdhc@70008000 { /* ESDHC2 */ + esdhc2: esdhc@70008000 { compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; + bus-width = <4>; status = "disabled"; }; @@ -97,7 +98,7 @@ status = "disabled"; }; - ecspi@70010000 { /* ECSPI1 */ + ecspi1: ecspi@70010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -115,43 +116,45 @@ status = "disabled"; }; - esdhc@70020000 { /* ESDHC3 */ + esdhc3: esdhc@70020000 { compatible = "fsl,imx51-esdhc"; reg = <0x70020000 0x4000>; interrupts = <3>; + bus-width = <4>; status = "disabled"; }; - esdhc@70024000 { /* ESDHC4 */ + esdhc4: esdhc@70024000 { compatible = "fsl,imx51-esdhc"; reg = <0x70024000 0x4000>; interrupts = <4>; + bus-width = <4>; status = "disabled"; }; }; - usb@73f80000 { + usbotg: usb@73f80000 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80000 0x0200>; interrupts = <18>; status = "disabled"; }; - usb@73f80200 { + usbh1: usb@73f80200 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80200 0x0200>; interrupts = <14>; status = "disabled"; }; - usb@73f80400 { + usbh2: usb@73f80400 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80400 0x0200>; interrupts = <16>; status = "disabled"; }; - usb@73f80600 { + usbh3: usb@73f80600 { compatible = "fsl,imx51-usb", "fsl,imx27-usb"; reg = <0x73f80600 0x0200>; interrupts = <17>; @@ -198,20 +201,20 @@ #interrupt-cells = <2>; }; - wdog@73f98000 { /* WDOG1 */ + wdog1: wdog@73f98000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; }; - wdog@73f9c000 { /* WDOG2 */ + wdog2: wdog@73f9c000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f9c000 0x4000>; interrupts = <59>; status = "disabled"; }; - iomuxc@73fa8000 { + iomuxc: iomuxc@73fa8000 { compatible = "fsl,imx51-iomuxc"; reg = <0x73fa8000 0x4000>; @@ -349,7 +352,7 @@ reg = <0x80000000 0x10000000>; ranges; - ecspi@83fac000 { /* ECSPI2 */ + ecspi2: ecspi@83fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-ecspi"; @@ -358,14 +361,14 @@ status = "disabled"; }; - sdma@83fb0000 { + sdma: sdma@83fb0000 { compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; - cspi@83fc0000 { + cspi: cspi@83fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-cspi", "fsl,imx35-cspi"; @@ -374,7 +377,7 @@ status = "disabled"; }; - i2c@83fc4000 { /* I2C2 */ + i2c2: i2c@83fc4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; @@ -383,7 +386,7 @@ status = "disabled"; }; - i2c@83fc8000 { /* I2C1 */ + i2c1: i2c@83fc8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx51-i2c", "fsl,imx21-i2c"; @@ -401,13 +404,13 @@ status = "disabled"; }; - audmux@83fd0000 { + audmux: audmux@83fd0000 { compatible = "fsl,imx51-audmux", "fsl,imx31-audmux"; reg = <0x83fd0000 0x4000>; status = "disabled"; }; - nand@83fdb000 { + nfc: nand@83fdb000 { compatible = "fsl,imx51-nand"; reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; interrupts = <8>; @@ -423,7 +426,7 @@ status = "disabled"; }; - ethernet@83fec000 { + fec: ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 08948af86d1a..b0075537195b 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -60,10 +60,17 @@ 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 1149 0x80000000 /* MX53_PAD_GPIO_16__GPIO7_11 */ + >; + }; + + led_pin_gpio7_7: led_gpio7_7@0 { + fsl,pins = < 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ >; }; }; + }; uart1: serial@53fbc000 { @@ -100,76 +107,93 @@ pmic: dialog@48 { compatible = "dlg,da9053-aa", "dlg,da9052"; reg = <0x48>; + interrupt-parent = <&gpio7>; + interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */ regulators { - buck0 { + buck1_reg: buck1 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <2075000>; + regulator-always-on; }; - buck1 { + buck2_reg: buck2 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <2075000>; + regulator-always-on; }; - buck2 { + buck3_reg: buck3 { regulator-min-microvolt = <925000>; regulator-max-microvolt = <2500000>; + regulator-always-on; }; - buck3 { + buck4_reg: buck4 { regulator-min-microvolt = <925000>; regulator-max-microvolt = <2500000>; + regulator-always-on; }; - ldo4 { + ldo1_reg: ldo1 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; }; - ldo5 { + ldo2_reg: ldo2 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: ldo3 { regulator-min-microvolt = <600000>; regulator-max-microvolt = <1800000>; + regulator-always-on; }; - ldo6 { + ldo4_reg: ldo4 { regulator-min-microvolt = <1725000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; - ldo7 { + ldo5_reg: ldo5 { regulator-min-microvolt = <1725000>; regulator-max-microvolt = <3300000>; + regulator-always-on; }; - ldo8 { + ldo6_reg: ldo6 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo9 { + ldo7_reg: ldo7 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo10 { + ldo8_reg: ldo8 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo11 { + ldo9_reg: ldo9 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; + regulator-always-on; }; - ldo12 { + ldo10_reg: ldo10 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3650000>; - }; - - ldo13 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <3600000>; + regulator-always-on; }; }; }; @@ -216,6 +240,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_gpio7_7>; user { label = "Heartbeat"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index caf09ff73f10..f45d4b1e21b5 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -81,17 +81,19 @@ reg = <0x50000000 0x40000>; ranges; - esdhc@50004000 { /* ESDHC1 */ + esdhc1: esdhc@50004000 { compatible = "fsl,imx53-esdhc"; reg = <0x50004000 0x4000>; interrupts = <1>; + bus-width = <4>; status = "disabled"; }; - esdhc@50008000 { /* ESDHC2 */ + esdhc2: esdhc@50008000 { compatible = "fsl,imx53-esdhc"; reg = <0x50008000 0x4000>; interrupts = <2>; + bus-width = <4>; status = "disabled"; }; @@ -102,7 +104,7 @@ status = "disabled"; }; - ecspi@50010000 { /* ECSPI1 */ + ecspi1: ecspi@50010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -120,43 +122,45 @@ status = "disabled"; }; - esdhc@50020000 { /* ESDHC3 */ + esdhc3: esdhc@50020000 { compatible = "fsl,imx53-esdhc"; reg = <0x50020000 0x4000>; interrupts = <3>; + bus-width = <4>; status = "disabled"; }; - esdhc@50024000 { /* ESDHC4 */ + esdhc4: esdhc@50024000 { compatible = "fsl,imx53-esdhc"; reg = <0x50024000 0x4000>; interrupts = <4>; + bus-width = <4>; status = "disabled"; }; }; - usb@53f80000 { + usbotg: usb@53f80000 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80000 0x0200>; interrupts = <18>; status = "disabled"; }; - usb@53f80200 { + usbh1: usb@53f80200 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80200 0x0200>; interrupts = <14>; status = "disabled"; }; - usb@53f80400 { + usbh2: usb@53f80400 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80400 0x0200>; interrupts = <16>; status = "disabled"; }; - usb@53f80600 { + usbh3: usb@53f80600 { compatible = "fsl,imx53-usb", "fsl,imx27-usb"; reg = <0x53f80600 0x0200>; interrupts = <17>; @@ -203,20 +207,20 @@ #interrupt-cells = <2>; }; - wdog@53f98000 { /* WDOG1 */ + wdog1: wdog@53f98000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; }; - wdog@53f9c000 { /* WDOG2 */ + wdog2: wdog@53f9c000 { compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f9c000 0x4000>; interrupts = <59>; status = "disabled"; }; - iomuxc@53fa8000 { + iomuxc: iomuxc@53fa8000 { compatible = "fsl,imx53-iomuxc"; reg = <0x53fa8000 0x4000>; @@ -316,6 +320,24 @@ }; }; + can1 { + pinctrl_can1_1: can1grp-1 { + fsl,pins = < + 847 0x80000000 /* MX53_PAD_PATA_INTRQ__CAN1_TXCAN */ + 853 0x80000000 /* MX53_PAD_PATA_DIOR__CAN1_RXCAN */ + >; + }; + }; + + can2 { + pinctrl_can2_1: can2grp-1 { + fsl,pins = < + 67 0x80000000 /* MX53_PAD_KEY_COL4__CAN2_TXCAN */ + 74 0x80000000 /* MX53_PAD_KEY_ROW4__CAN2_RXCAN */ + >; + }; + }; + i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = < @@ -334,6 +356,15 @@ }; }; + i2c3 { + pinctrl_i2c3_1: i2c3grp-1 { + fsl,pins = < + 1102 0xc0000000 /* MX53_PAD_GPIO_6__I2C3_SDA */ + 1130 0xc0000000 /* MX53_PAD_GPIO_5__I2C3_SCL */ + >; + }; + }; + uart1 { pinctrl_uart1_1: uart1grp-1 { fsl,pins = < @@ -369,6 +400,25 @@ >; }; }; + + uart4 { + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + 11 0x1c5 /* MX53_PAD_KEY_COL0__UART4_TXD_MUX */ + 18 0x1c5 /* MX53_PAD_KEY_ROW0__UART4_RXD_MUX */ + >; + }; + }; + + uart5 { + pinctrl_uart5_1: uart5grp-1 { + fsl,pins = < + 24 0x1c5 /* MX53_PAD_KEY_COL1__UART5_TXD_MUX */ + 31 0x1c5 /* MX53_PAD_KEY_ROW1__UART5_RXD_MUX */ + >; + }; + }; + }; uart1: serial@53fbc000 { @@ -429,7 +479,7 @@ #interrupt-cells = <2>; }; - i2c@53fec000 { /* I2C3 */ + i2c3: i2c@53fec000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; @@ -460,7 +510,7 @@ status = "disabled"; }; - ecspi@63fac000 { /* ECSPI2 */ + ecspi2: ecspi@63fac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi"; @@ -469,14 +519,14 @@ status = "disabled"; }; - sdma@63fb0000 { + sdma: sdma@63fb0000 { compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; - cspi@63fc0000 { + cspi: cspi@63fc0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-cspi", "fsl,imx35-cspi"; @@ -485,7 +535,7 @@ status = "disabled"; }; - i2c@63fc4000 { /* I2C2 */ + i2c2: i2c@63fc4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; @@ -494,7 +544,7 @@ status = "disabled"; }; - i2c@63fc8000 { /* I2C1 */ + i2c1: i2c@63fc8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx53-i2c", "fsl,imx21-i2c"; @@ -512,13 +562,13 @@ status = "disabled"; }; - audmux@63fd0000 { + audmux: audmux@63fd0000 { compatible = "fsl,imx53-audmux", "fsl,imx31-audmux"; reg = <0x63fd0000 0x4000>; status = "disabled"; }; - nand@63fdb000 { + nfc: nand@63fdb000 { compatible = "fsl,imx53-nand"; reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; interrupts = <8>; @@ -534,7 +584,7 @@ status = "disabled"; }; - ethernet@63fec000 { + fec: ethernet@63fec000 { compatible = "fsl,imx53-fec", "fsl,imx25-fec"; reg = <0x63fec000 0x4000>; interrupts = <87>; diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts new file mode 100644 index 000000000000..826e4ad1477e --- /dev/null +++ b/arch/arm/boot/dts/imx6q-sabreauto.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2011 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx6q.dtsi" + +/ { + model = "Freescale i.MX6 Quad SABRE Automotive Board"; + compatible = "fsl,imx6q-sabreauto", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; + + soc { + aips-bus@02000000 { /* AIPS1 */ + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1376 0x80000000 /* MX6Q_PAD_NANDF_CS2__GPIO_6_15 */ + 13 0x80000000 /* MX6Q_PAD_SD2_DAT2__GPIO_1_13 */ + >; + }; + }; + }; + }; + + aips-bus@02100000 { /* AIPS2 */ + uart4: serial@021f0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; + status = "okay"; + }; + + ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; + phy-mode = "rgmii"; + status = "okay"; + }; + + usdhc@02198000 { /* uSDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; + cd-gpios = <&gpio6 15 0>; + wp-gpios = <&gpio1 13 0>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index e596c28c214d..a42402562b7b 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -38,6 +38,8 @@ hog { pinctrl_hog: hoggrp { fsl,pins = < + 1004 0x80000000 /* MX6Q_PAD_GPIO_4__GPIO_1_4 */ + 1012 0x80000000 /* MX6Q_PAD_GPIO_5__GPIO_1_5 */ 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ @@ -73,4 +75,20 @@ }; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 4 0>; + linux,code = <115>; /* KEY_VOLUMEUP */ + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 5 0>; + linux,code = <114>; /* KEY_VOLUMEDOWN */ + }; + }; }; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index f604a44a5c66..6dfeaedef307 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -36,6 +36,14 @@ compatible = "arm,cortex-a9"; reg = <0>; next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + cpu0-supply = <®_cpu>; }; cpu@1 { @@ -100,7 +108,7 @@ clocks = <&clks 106>; }; - gpmi-nand@00112000 { + nfc: gpmi-nand@00112000 { compatible = "fsl,imx6q-gpmi-nand"; #address-cells = <1>; #size-cells = <1>; @@ -144,12 +152,12 @@ reg = <0x02000000 0x40000>; ranges; - spdif@02004000 { + spdif: spdif@02004000 { reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; }; - ecspi@02008000 { /* eCSPI1 */ + ecspi1: ecspi@02008000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -160,7 +168,7 @@ status = "disabled"; }; - ecspi@0200c000 { /* eCSPI2 */ + ecspi2: ecspi@0200c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -171,7 +179,7 @@ status = "disabled"; }; - ecspi@02010000 { /* eCSPI3 */ + ecspi3: ecspi@02010000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -182,7 +190,7 @@ status = "disabled"; }; - ecspi@02014000 { /* eCSPI4 */ + ecspi4: ecspi@02014000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -193,7 +201,7 @@ status = "disabled"; }; - ecspi@02018000 { /* eCSPI5 */ + ecspi5: ecspi@02018000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; @@ -213,7 +221,7 @@ status = "disabled"; }; - esai@02024000 { + esai: esai@02024000 { reg = <0x02024000 0x4000>; interrupts = <0 51 0x04>; }; @@ -248,7 +256,7 @@ status = "disabled"; }; - asrc@02034000 { + asrc: asrc@02034000 { reg = <0x02034000 0x4000>; interrupts = <0 50 0x04>; }; @@ -258,7 +266,7 @@ }; }; - vpu@02040000 { + vpu: vpu@02040000 { reg = <0x02040000 0x3c000>; interrupts = <0 3 0x04 0 12 0x04>; }; @@ -267,37 +275,37 @@ reg = <0x0207c000 0x4000>; }; - pwm@02080000 { /* PWM1 */ + pwm1: pwm@02080000 { reg = <0x02080000 0x4000>; interrupts = <0 83 0x04>; }; - pwm@02084000 { /* PWM2 */ + pwm2: pwm@02084000 { reg = <0x02084000 0x4000>; interrupts = <0 84 0x04>; }; - pwm@02088000 { /* PWM3 */ + pwm3: pwm@02088000 { reg = <0x02088000 0x4000>; interrupts = <0 85 0x04>; }; - pwm@0208c000 { /* PWM4 */ + pwm4: pwm@0208c000 { reg = <0x0208c000 0x4000>; interrupts = <0 86 0x04>; }; - flexcan@02090000 { /* CAN1 */ + can1: flexcan@02090000 { reg = <0x02090000 0x4000>; interrupts = <0 110 0x04>; }; - flexcan@02094000 { /* CAN2 */ + can2: flexcan@02094000 { reg = <0x02094000 0x4000>; interrupts = <0 111 0x04>; }; - gpt@02098000 { + gpt: gpt@02098000 { compatible = "fsl,imx6q-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 0x04>; @@ -373,19 +381,19 @@ #interrupt-cells = <2>; }; - kpp@020b8000 { + kpp: kpp@020b8000 { reg = <0x020b8000 0x4000>; interrupts = <0 82 0x04>; }; - wdog@020bc000 { /* WDOG1 */ + wdog1: wdog@020bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 0x04>; clocks = <&clks 0>; }; - wdog@020c0000 { /* WDOG2 */ + wdog2: wdog@020c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 0x04>; @@ -447,7 +455,7 @@ anatop-max-voltage = <2750000>; }; - regulator-vddcore@140 { + reg_cpu: regulator-vddcore@140 { compatible = "fsl,anatop-regulator"; regulator-name = "cpu"; regulator-min-microvolt = <725000>; @@ -505,27 +513,35 @@ }; snvs@020cc000 { - reg = <0x020cc000 0x4000>; - interrupts = <0 19 0x04 0 20 0x04>; + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <0 19 0x04 0 20 0x04>; + }; }; - epit@020d0000 { /* EPIT1 */ + epit1: epit@020d0000 { /* EPIT1 */ reg = <0x020d0000 0x4000>; interrupts = <0 56 0x04>; }; - epit@020d4000 { /* EPIT2 */ + epit2: epit@020d4000 { /* EPIT2 */ reg = <0x020d4000 0x4000>; interrupts = <0 57 0x04>; }; - src@020d8000 { + src: src@020d8000 { compatible = "fsl,imx6q-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; }; - gpc@020dc000 { + gpc: gpc@020dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupts = <0 89 0x04 0 90 0x04>; @@ -536,7 +552,7 @@ reg = <0x020e0000 0x38>; }; - iomuxc@020e0000 { + iomuxc: iomuxc@020e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; @@ -748,17 +764,17 @@ }; }; - dcic@020e4000 { /* DCIC1 */ + dcic1: dcic@020e4000 { reg = <0x020e4000 0x4000>; interrupts = <0 124 0x04>; }; - dcic@020e8000 { /* DCIC2 */ + dcic2: dcic@020e8000 { reg = <0x020e8000 0x4000>; interrupts = <0 125 0x04>; }; - sdma@020ec000 { + sdma: sdma@020ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 0x04>; @@ -784,7 +800,7 @@ reg = <0x0217c000 0x4000>; }; - usb@02184000 { /* USB OTG */ + usbotg: usb@02184000 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 0x04>; @@ -794,7 +810,7 @@ status = "disabled"; }; - usb@02184200 { /* USB1 */ + usbh1: usb@02184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 0x04>; @@ -804,7 +820,7 @@ status = "disabled"; }; - usb@02184400 { /* USB2 */ + usbh2: usb@02184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 0x04>; @@ -813,7 +829,7 @@ status = "disabled"; }; - usb@02184600 { /* USB3 */ + usbh3: usb@02184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 0x04>; @@ -822,14 +838,14 @@ status = "disabled"; }; - usbmisc: usbmisc@02184800 { + usbmisc: usbmisc: usbmisc@02184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; clocks = <&clks 162>; }; - ethernet@02188000 { + fec: ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; @@ -843,43 +859,47 @@ interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>; }; - usdhc@02190000 { /* uSDHC1 */ + usdhc1: usdhc@02190000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 0x04>; clocks = <&clks 163>, <&clks 163>, <&clks 163>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - usdhc@02194000 { /* uSDHC2 */ + usdhc2: usdhc@02194000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 0x04>; clocks = <&clks 164>, <&clks 164>, <&clks 164>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - usdhc@02198000 { /* uSDHC3 */ + usdhc3: usdhc@02198000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 0x04>; clocks = <&clks 165>, <&clks 165>, <&clks 165>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - usdhc@0219c000 { /* uSDHC4 */ + usdhc4: usdhc@0219c000 { compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 0x04>; clocks = <&clks 166>, <&clks 166>, <&clks 166>; clock-names = "ipg", "ahb", "per"; + bus-width = <4>; status = "disabled"; }; - i2c@021a0000 { /* I2C1 */ + i2c1: i2c@021a0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -889,7 +909,7 @@ status = "disabled"; }; - i2c@021a4000 { /* I2C2 */ + i2c2: i2c@021a4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -899,7 +919,7 @@ status = "disabled"; }; - i2c@021a8000 { /* I2C3 */ + i2c3: i2c@021a8000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; @@ -913,12 +933,12 @@ reg = <0x021ac000 0x4000>; }; - mmdc@021b0000 { /* MMDC0 */ + mmdc0: mmdc@021b0000 { /* MMDC0 */ compatible = "fsl,imx6q-mmdc"; reg = <0x021b0000 0x4000>; }; - mmdc@021b4000 { /* MMDC1 */ + mmdc1: mmdc@021b4000 { /* MMDC1 */ reg = <0x021b4000 0x4000>; }; @@ -946,7 +966,7 @@ interrupts = <0 109 0x04>; }; - audmux@021d8000 { + audmux: audmux@021d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; status = "disabled"; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi new file mode 100644 index 000000000000..d6c9d65cbaeb --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -0,0 +1,44 @@ +/ { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6281-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi new file mode 100644 index 000000000000..9ae2004d5675 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -0,0 +1,45 @@ +/ { + ocp@f1000000 { + + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6282-pinctrl"; + reg = <0x10000 0x20>; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + + i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + clock-frequency = <100000>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-98dx4122.dtsi b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi new file mode 100644 index 000000000000..3271e4c8ea07 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-98dx4122.dtsi @@ -0,0 +1,31 @@ +/ { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,98dx4122-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 9b32d0272825..6875ac00c174 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "D-Link DNS NASes (kirkwood-based)"; @@ -35,7 +36,116 @@ 6000 2>; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 4 0>; + }; + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart1 + &pmx_sata0 &pmx_sata1 + &pmx_led_power + &pmx_led_red_right_hdd + &pmx_led_red_left_hdd + &pmx_led_red_usb_325 + &pmx_button_power + &pmx_led_red_usb_320 + &pmx_power_off &pmx_power_back_on + &pmx_power_sata0 &pmx_power_sata1 + &pmx_present_sata0 &pmx_present_sata1 + &pmx_led_white_usb &pmx_fan_tacho + &pmx_fan_high_speed &pmx_fan_low_speed + &pmx_button_unmount &pmx_button_reset + &pmx_temp_alarm >; + pinctrl-names = "default"; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp20"; + marvell,function = "sata1"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp21"; + marvell,function = "sata0"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + pmx_led_red_right_hdd: pmx-led-red-right-hdd { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + pmx_led_red_left_hdd: pmx-led-red-left-hdd { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_led_red_usb_325: pmx-led-red-usb-325 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_button_power: pmx-button-power { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_led_red_usb_320: pmx-led-red-usb-320 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_power_off: pmx-power-off { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_power_back_on: pmx-power-back-on { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_power_sata0: pmx-power-sata0 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_power_sata1: pmx-power-sata1 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_present_sata0: pmx-present-sata0 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_present_sata1: pmx-present-sata1 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_white_usb: pmx-led-white-usb { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_fan_tacho: pmx-fan-tacho { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_fan_high_speed: pmx-fan-high-speed { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_fan_low_speed: pmx-fan-low-speed { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_button_unmount: pmx-button-unmount { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_temp_alarm: pmx-temp-alarm { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; sata@80000 { status = "okay"; nr-ports = <2>; @@ -43,6 +153,7 @@ nand@3000000 { status = "okay"; + chip-delay = <35>; partition@0 { label = "u-boot"; @@ -76,4 +187,33 @@ }; }; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sata0_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 7 0>; + }; + sata1_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 8 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 08a582414b88..2e3dd34e21a5 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Seagate FreeAgent Dockstar"; @@ -16,6 +17,25 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_usb_power_enable + &pmx_led_green &pmx_led_orange >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_green: pmx-led-green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_orange: pmx-led-orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; @@ -54,4 +74,21 @@ gpios = <&gpio1 15 1>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 26e281fbf6bc..f2d386c95b07 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Globalscale Technologies Dreamplug"; @@ -16,6 +17,26 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_spi + &pmx_led_bluetooth &pmx_led_wifi + &pmx_led_wifi_ap >; + pinctrl-names = "default"; + + pmx_led_bluetooth: pmx-led-bluetooth { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_led_wifi: pmx-led-wifi { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + pmx_led_wifi_ap: pmx-led-wifi-ap { + marvell,pins = "mpp49"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index 7c8238fbb6f9..1b133e0c566e 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Seagate GoFlex Net"; @@ -16,6 +17,61 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange + &pmx_led_left_cap_0 &pmx_led_left_cap_1 + &pmx_led_left_cap_2 &pmx_led_left_cap_3 + &pmx_led_right_cap_0 &pmx_led_right_cap_1 + &pmx_led_right_cap_2 &pmx_led_right_cap_3 + >; + pinctrl-names = "default"; + + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_0: pmx-led_right_cap_0 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_1: pmx-led_right_cap_1 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_2: pmx-led_right_cap_2 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_led_right_cap_3: pmx-led_right_cap_3 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_0: pmx-led_left_cap_0 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_1: pmx-led_left_cap_1 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_2: pmx-led_left_cap_2 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_left_cap_3: pmx-led_left_cap_3 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_green: pmx-led_green { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_led_orange: pmx-led_orange { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "ok"; @@ -96,4 +152,21 @@ gpios = <&gpio1 9 0>; }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 29 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 66794ed75ff1..71902da33d63 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)"; @@ -16,6 +17,39 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand + &pmx_led_os_red &pmx_power_off + &pmx_led_os_green &pmx_led_usb_transfer + &pmx_button_reset &pmx_button_usb_copy >; + pinctrl-names = "default"; + + pmx_led_os_red: pmx-led-os-red { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + pmx_power_off: pmx-power-off { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + pmx_led_os_green: pmx-led-os-green { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + pmx_led_usb_transfer: pmx-led-usb-transfer { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + pmx_button_usb_copy: pmx-button-usb-copy { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + }; serial@12000 { clock-frequency = <200000000>; status = "okay"; @@ -79,4 +113,10 @@ gpios = <&gpio0 27 0>; }; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 24 0>; + }; + + }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index d97cd9d4753e..504f16be8b54 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Iomega Iconnect"; @@ -18,6 +19,56 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_gpio_12 &pmx_gpio_35 + &pmx_gpio_41 &pmx_gpio_42 + &pmx_gpio_43 &pmx_gpio_44 + &pmx_gpio_45 &pmx_gpio_46 + &pmx_gpio_47 &pmx_gpio_48 >; + pinctrl-names = "default"; + + pmx_gpio_12: pmx-gpio-12 { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_gpio_35: pmx-gpio-35 { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_gpio_41: pmx-gpio-41 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_gpio_42: pmx-gpio-42 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_gpio_43: pmx-gpio-43 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_gpio_44: pmx-gpio-44 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_gpio_45: pmx-gpio-45 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_gpio_46: pmx-gpio-46 { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + pmx_gpio_47: pmx-gpio-47 { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + pmx_gpio_48: pmx-gpio-48 { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + }; i2c@11000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index 865aeec40a26..6cae4599c4b3 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { model = "Iomega StorCenter ix2-200"; @@ -16,6 +17,94 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_button_reset &pmx_button_power + &pmx_led_backup &pmx_led_power + &pmx_button_otb &pmx_led_rebuild + &pmx_led_health + &pmx_led_sata_brt_ctrl_1 + &pmx_led_sata_brt_ctrl_2 + &pmx_led_backup_brt_ctrl_1 + &pmx_led_backup_brt_ctrl_2 + &pmx_led_power_brt_ctrl_1 + &pmx_led_power_brt_ctrl_2 + &pmx_led_health_brt_ctrl_1 + &pmx_led_health_brt_ctrl_2 + &pmx_led_rebuild_brt_ctrl_1 + &pmx_led_rebuild_brt_ctrl_2 >; + pinctrl-names = "default"; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp12"; + marvell,function = "gpio"; + }; + pmx_button_power: pmx-button-power { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + pmx_led_backup: pmx-led-backup { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_button_otb: pmx-button-otb { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + pmx_led_rebuild: pmx-led-rebuild { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_health: pmx-led_health { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + }; i2c@11000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-is2.dts b/arch/arm/boot/dts/kirkwood-is2.dts new file mode 100644 index 000000000000..0bdce0ad7277 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-is2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Internet Space v2"; + compatible = "lacie,inetspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index 75bdb93fed26..8db3123ac80f 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -1,6 +1,7 @@ /dts-v1/; /include/ "kirkwood.dtsi" +/include/ "kirkwood-98dx4122.dtsi" / { model = "Keymile Kirkwood Reference Design"; @@ -16,6 +17,22 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_i2c_gpio_sda + &pmx_i2c_gpio_scl >; + pinctrl-names = "default"; + + pmx_i2c_gpio_sda: pmx-gpio-sda { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_i2c_gpio_scl: pmx-gpio-scl { + marvell,pins = "mpp9"; + marvell,function = "gpio"; + }; + }; + serial@12000 { clock-frequency = <200000000>; status = "ok"; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 8fea375c734d..37d45c4f88fb 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -1,4 +1,5 @@ /include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" / { chosen { @@ -6,6 +7,71 @@ }; ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_power_hdd &pmx_usb_vbus + &pmx_fan_low &pmx_fan_high + &pmx_led_function_red &pmx_led_alarm + &pmx_led_info &pmx_led_power + &pmx_fan_lock &pmx_button_function + &pmx_power_switch &pmx_power_auto_switch + &pmx_led_function_blue >; + pinctrl-names = "default"; + + pmx_power_hdd: pmx-power-hdd { + marvell,pins = "mpp10"; + marvell,function = "gpo"; + }; + pmx_usb_vbus: pmx-usb-vbus { + marvell,pins = "mpp11"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp18"; + marvell,function = "gpo"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp19"; + marvell,function = "gpo"; + }; + pmx_led_function_blue: pmx-led-function-blue { + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_led_alarm: pmx-led-alarm { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_led_info: pmx-led-info { + marvell,pins = "mpp38"; + marvell,function = "gpio"; + }; + pmx_led_power: pmx-led-power { + marvell,pins = "mpp39"; + marvell,function = "gpio"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + pmx_button_function: pmx-button-function { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + pmx_power_switch: pmx-power-switch { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + pmx_power_auto_switch: pmx-power-auto-switch { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_led_function_red: pmx-led-function_red { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + + }; sata@80000 { status = "okay"; nr-ports = <1>; @@ -94,4 +160,44 @@ gpios = <&gpio1 16 1>; }; }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 19 1 + &gpio0 18 1>; + gpio-fan,speed-map = <0 3 + 1500 2 + 3250 1 + 5000 0>; + alarm-gpios = <&gpio1 8 0>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb_power: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 11 0>; + }; + hdd_power: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 10 0>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts new file mode 100644 index 000000000000..262c65403760 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -0,0 +1,178 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6281.dtsi" + +/ { + model = "MPL CEC4"; + compatible = "mpl,cec4-10", "mpl,cec4", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_nand &pmx_uart0 + &pmx_led_health &pmx_sdio + &pmx_sata0 &pmx_sata1 + &pmx_led_user1o + &pmx_led_user1g &pmx_led_user0o + &pmx_led_user0g &pmx_led_misc + &pmx_sdio_cd + >; + pinctrl-names = "default"; + + pmx_led_health: pmx-led-health { + marvell,pins = "mpp7"; + marvell,function = "gpo"; + }; + + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp34"; + marvell,function = "sata1"; + }; + + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp35"; + marvell,function = "sata0"; + }; + + pmx_led_user1o: pmx-led-user1o { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + pmx_led_user1g: pmx-led-user1g { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + pmx_led_user0o: pmx-led-user0o { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + pmx_led_user0g: pmx-led-user0g { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_led_misc: pmx-led-misc { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + pmx_sdio_cd: pmx-sdio-cd { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + }; + + i2c@11000 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + eeprom@57 { + compatible = "atmel,24c02"; + reg = <0x57>; + }; + + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x100000>; + }; + + partition@100000 { + label = "env"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "fdt"; + reg = <0x180000 0x80000>; + }; + + partition@200000 { + label = "kernel"; + reg = <0x200000 0x400000>; + }; + + partition@600000 { + label = "rootfs"; + reg = <0x600000 0x1fa00000>; + }; + }; + + rtc@10300 { + status = "disabled"; + }; + + sata@80000 { + nr-ports = <2>; + status = "okay"; + + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio0 7 1>; + }; + + user1o { + label = "user1:orange"; + gpios = <&gpio1 8 1>; + default-state = "on"; + }; + + user1g { + label = "user1:green"; + gpios = <&gpio1 9 1>; + default-state = "on"; + }; + + user0o { + label = "user0:orange"; + gpios = <&gpio1 12 1>; + default-state = "on"; + }; + + user0g { + label = "user0:green"; + gpios = <&gpio1 13 1>; + default-state = "on"; + }; + + misc { + label = "status:orange:misc"; + gpios = <&gpio1 14 1>; + default-state = "on"; + }; + + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi new file mode 100644 index 000000000000..9bc6785ad228 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -0,0 +1,63 @@ +/include/ "kirkwood.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + + i2c@11000 { + status = "okay"; + + eeprom@50 { + compatible = "at,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power push button"; + linux,code = <116>; + gpios = <&gpio1 0 0>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "ns2:red:fail"; + gpios = <&gpio0 12 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2.dts b/arch/arm/boot/dts/kirkwood-ns2.dts new file mode 100644 index 000000000000..f2d36ecf36d8 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space v2"; + compatible = "lacie,netspace_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts new file mode 100644 index 000000000000..b02eb4ea1bb4 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -0,0 +1,30 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Lite v2"; + compatible = "lacie,netspace_lite_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue-sata { + label = "ns2:blue:sata"; + gpios = <&gpio0 30 1>; + linux,default-trigger = "default-on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts new file mode 100644 index 000000000000..bcec4d6cada7 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Max v2"; + compatible = "lacie,netspace_max_v2", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 1500 15 + 1700 14 + 1800 13 + 2100 12 + 3100 11 + 3300 10 + 4300 9 + 5500 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts new file mode 100644 index 000000000000..b79f5eb25589 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -0,0 +1,49 @@ +/dts-v1/; + +/include/ "kirkwood-ns2-common.dtsi" + +/ { + model = "LaCie Network Space Mini v2"; + compatible = "lacie,netspace_mini_v2", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + ocp@f1000000 { + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio0 22 1 + &gpio0 7 1 + &gpio1 1 1 + &gpio0 23 1>; + gpio-fan,speed-map = + < 0 0 + 3000 15 + 3180 14 + 4140 13 + 4570 12 + 6760 11 + 7140 10 + 7980 9 + 9200 8>; + alarm-gpios = <&gpio0 25 1>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "ns2:blue:sata"; + slow-gpio = <&gpio0 29 0>; + cmd-gpio = <&gpio0 30 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts new file mode 100644 index 000000000000..5509f9659546 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -0,0 +1,144 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "ZyXEL NSA310"; + compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + ocp@f1000000 { + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + i2c@11000 { + status = "okay"; + }; + + nand@3000000 { + status = "okay"; + chip-delay = <35>; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0x0100000>; + read-only; + }; + partition@100000 { + label = "uboot_env"; + reg = <0x0100000 0x0080000>; + }; + partition@180000 { + label = "key_store"; + reg = <0x0180000 0x0080000>; + }; + partition@200000 { + label = "info"; + reg = <0x0200000 0x0080000>; + }; + partition@280000 { + label = "etc"; + reg = <0x0280000 0x0a00000>; + }; + partition@c80000 { + label = "kernel_1"; + reg = <0x0c80000 0x0a00000>; + }; + partition@1680000 { + label = "rootfs1"; + reg = <0x1680000 0x2fc0000>; + }; + partition@4640000 { + label = "kernel_2"; + reg = <0x4640000 0x0a00000>; + }; + partition@5040000 { + label = "rootfs2"; + reg = <0x5040000 0x2fc0000>; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio1 14 0>; + }; + button@2 { + label = "Copy Button"; + linux,code = <133>; + gpios = <&gpio1 5 1>; + }; + button@3 { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio1 4 1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + green-sys { + label = "nsa310:green:sys"; + gpios = <&gpio0 28 0>; + }; + red-sys { + label = "nsa310:red:sys"; + gpios = <&gpio0 29 0>; + }; + green-hdd { + label = "nsa310:green:hdd"; + gpios = <&gpio1 9 0>; + }; + red-hdd { + label = "nsa310:red:hdd"; + gpios = <&gpio1 10 0>; + }; + green-esata { + label = "nsa310:green:esata"; + gpios = <&gpio0 12 0>; + }; + red-esata { + label = "nsa310:red:esata"; + gpios = <&gpio0 13 0>; + }; + green-usb { + label = "nsa310:green:usb"; + gpios = <&gpio0 15 0>; + }; + red-usb { + label = "nsa310:red:usb"; + gpios = <&gpio0 16 0>; + }; + green-copy { + label = "nsa310:green:copy"; + gpios = <&gpio1 7 0>; + }; + red-copy { + label = "nsa310:red:copy"; + gpios = <&gpio1 8 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts new file mode 100644 index 000000000000..49d3d74d4d38 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -0,0 +1,98 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" +/include/ "kirkwood-6282.dtsi" + +/ { + model = "Plat'Home OpenBlocksA6"; + compatible = "plathome,openblocks-a6", "marvell,kirkwood-88f6283", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + serial@12100 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + chip-delay = <25>; + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0 0x90000>; + }; + + partition@90000 { + label = "env"; + reg = <0x90000 0x44000>; + }; + + partition@d4000 { + label = "test"; + reg = <0xd4000 0x24000>; + }; + + partition@f4000 { + label = "conf"; + reg = <0xf4000 0x400000>; + }; + + partition@4f4000 { + label = "linux"; + reg = <0x4f4000 0x1d20000>; + }; + + partition@2214000 { + label = "user"; + reg = <0x2214000 0x1dec000>; + }; + }; + + sata@80000 { + nr-ports = <1>; + status = "okay"; + }; + + i2c@11100 { + status = "okay"; + + s35390a: s35390a@30 { + compatible = "s35390a"; + reg = <0x30>; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-red { + label = "obsa6:red:stat"; + gpios = <&gpio1 9 1>; + }; + + led-green { + label = "obsa6:green:stat"; + gpios = <&gpio1 10 1>; + }; + + led-yellow { + label = "obsa6:yellow:stat"; + gpios = <&gpio1 11 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts new file mode 100644 index 000000000000..c0de5a7f660d --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -0,0 +1,85 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Univeral Scientific Industrial Co. Topkick-1281P2"; + compatible = "usi,topkick-1281P2", "usi,topkick", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + }; + + partition@180000 { + label = "u-boot env"; + reg = <0x0180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "uInitrd"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "rootfs"; + reg = <0x1800000 0xe800000>; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + disk { + label = "topkick:yellow:disk"; + gpios = <&gpio0 21 1>; + linux,default-trigger = "ide-disk"; + }; + system2 { + label = "topkick:red:system"; + gpios = <&gpio1 5 1>; + }; + system { + label = "topkick:blue:system"; + gpios = <&gpio1 6 1>; + default-state = "on"; + }; + wifi { + label = "topkick:green:wifi"; + gpios = <&gpio1 7 1>; + }; + wifi2 { + label = "topkick:yellow:wifi"; + gpios = <&gpio1 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index ccbf32757800..8295c833887f 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -1,8 +1,39 @@ /dts-v1/; /include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood-6281.dtsi" / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi + &pmx_twsi0 &pmx_sata0 &pmx_sata1 + &pmx_ram_size &pmx_reset_button + &pmx_USB_copy_button &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { + /* RAM: 0: 256 MB, 1: 512 MB */ + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_USB_copy_button: pmx-USB-copy-button { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp16"; + marvell,function = "gpio"; + }; + pmx_board_id: pmx-board-id { + /* 0: TS-11x, 1: TS-21x */ + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index fbe9932161a1..df3f95dfba33 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -1,8 +1,39 @@ /dts-v1/; /include/ "kirkwood-ts219.dtsi" +/include/ "kirkwood-6282.dtsi" / { + ocp@f1000000 { + pinctrl: pinctrl@10000 { + + pinctrl-0 = < &pmx_uart0 &pmx_uart1 &pmx_spi + &pmx_twsi0 &pmx_sata0 &pmx_sata1 + &pmx_ram_size &pmx_reset_button + &pmx_USB_copy_button &pmx_board_id>; + pinctrl-names = "default"; + + pmx_ram_size: pmx-ram-size { + /* RAM: 0: 256 MB, 1: 512 MB */ + marvell,pins = "mpp36"; + marvell,function = "gpio"; + }; + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp37"; + marvell,function = "gpio"; + }; + pmx_USB_copy_button: pmx-USB-copy-button { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pmx_board_id: pmx-board-id { + /* 0: TS-11x, 1: TS-21x */ + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + }; + }; + gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 4e5b8154a5be..a990c30f0a26 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -4,6 +4,10 @@ compatible = "marvell,kirkwood"; interrupt-parent = <&intc>; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + }; intc: interrupt-controller { compatible = "marvell,orion-intc", "marvell,intc"; interrupt-controller; @@ -24,7 +28,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10100 0x40>; - ngpio = <32>; + ngpios = <32>; + interrupt-controller; interrupts = <35>, <36>, <37>, <38>; }; @@ -33,7 +38,8 @@ #gpio-cells = <2>; gpio-controller; reg = <0x10140 0x40>; - ngpio = <18>; + ngpios = <18>; + interrupt-controller; interrupts = <39>, <40>, <41>; }; @@ -77,6 +83,13 @@ status = "okay"; }; + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <19>; + status = "okay"; + }; + sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index e5ffe960dbf3..1582f484a867 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -182,6 +182,13 @@ pnx,timeout = <0x64>; }; + mpwm: mpwm@400E8000 { + compatible = "nxp,lpc3220-motor-pwm"; + reg = <0x400E8000 0x78>; + status = "disabled"; + #pwm-cells = <2>; + }; + i2cusb: i2c@31020300 { compatible = "nxp,pnx-i2c"; reg = <0x31020300 0x100>; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts new file mode 100644 index 000000000000..5a3a58b7e18f --- /dev/null +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "orion5x.dtsi" + +/ { + model = "LaCie Ethernet Disk mini V2"; + compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x"; + + memory { + reg = <0x00000000 0x4000000>; /* 64 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <166666667>; + status = "okay"; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "Power-on Switch"; + linux,code = <116>; /* KEY_POWER */ + gpios = <&gpio0 18 0>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + + led@1 { + label = "power:blue"; + gpios = <&gpio0 16 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi new file mode 100644 index 000000000000..8aad00f81ed9 --- /dev/null +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell Orion5x SoC"; + compatible = "marvell,orion5x"; + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc", "marvell,intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>; + }; + + ocp@f1000000 { + compatible = "simple-bus"; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf2200000 0xf2200000 0x0000800>; + #address-cells = <1>; + #size-cells = <1>; + + gpio0: gpio@10100 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0x10100 0x40>; + ngpio = <32>; + interrupts = <6>, <7>, <8>, <9>; + }; + + serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <3>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <4>; + /* set clock-frequency in board dts */ + status = "disabled"; + }; + + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + status = "okay"; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clock-frequency = <100000>; + status = "disabled"; + }; + + crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>, + <0xf2200000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 702c0baa6004..9e02a913eb62 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -14,7 +14,7 @@ / { model = "Calao Systems Snowball platform with device tree"; - compatible = "calaosystems,snowball-a9500"; + compatible = "calaosystems,snowball-a9500", "st-ericsson,u9500"; memory { reg = <0x00000000 0x20000000>; @@ -120,10 +120,10 @@ }; // External Micro SD slot - sdi@80126000 { + sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; - bus-width = <8>; + bus-width = <4>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; @@ -134,7 +134,7 @@ }; // On-board eMMC - sdi@80114000 { + sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; max-frequency = <50000000>; bus-width = <8>; @@ -183,5 +183,137 @@ reg = <0x33>; }; }; + + prcmu@80157000 { + db8500-prcmu-regulators { + db8500_vape_reg: db8500_vape { + regulator-name = "db8500-vape"; + }; + + db8500_varm_reg: db8500_varm { + regulator-name = "db8500-varm"; + }; + + db8500_vmodem_reg: db8500_vmodem { + regulator-name = "db8500-vmodem"; + }; + + db8500_vpll_reg: db8500_vpll { + regulator-name = "db8500-vpll"; + }; + + db8500_vsmps1_reg: db8500_vsmps1 { + regulator-name = "db8500-vsmps1"; + }; + + db8500_vsmps2_reg: db8500_vsmps2 { + regulator-name = "db8500-vsmps2"; + }; + + db8500_vsmps3_reg: db8500_vsmps3 { + regulator-name = "db8500-vsmps3"; + }; + + db8500_vrf1_reg: db8500_vrf1 { + regulator-name = "db8500-vrf1"; + }; + + db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-name = "db8500-sva-mmdsp"; + }; + + db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-name = "db8500-sva-mmdsp-ret"; + }; + + db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-name = "db8500_sva_pipe"; + }; + + db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-name = "db8500_sia_mmdsp"; + }; + + db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { + regulator-name = "db8500-sia-mmdsp-ret"; + }; + + db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-name = "db8500-sia-pipe"; + }; + + db8500_sga_reg: db8500_sga { + regulator-name = "db8500-sga"; + }; + + db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-name = "db8500-b2r2-mcde"; + }; + + db8500_esram12_reg: db8500_esram12 { + regulator-name = "db8500-esram12"; + }; + + db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-name = "db8500-esram12-ret"; + }; + + db8500_esram34_reg: db8500_esram34 { + regulator-name = "db8500-esram34"; + }; + + db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-name = "db8500-esram34-ret"; + }; + }; + + ab8500@5 { + ab8500-regulators { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-name = "dummy"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi new file mode 100644 index 000000000000..39446a247e79 --- /dev/null +++ b/arch/arm/boot/dts/stuib.dtsi @@ -0,0 +1,78 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/ { + soc-u9500 { + i2c@80004000 { + stmpe1601: stmpe1601@40 { + compatible = "st,stmpe1601"; + reg = <0x40>; + interrupts = <26 0x1>; + interrupt-parent = <&gpio6>; + interrupt-controller; + + wakeup-source; + st,autosleep-timeout = <1024>; + + stmpe_keypad { + compatible = "st,stmpe-keypad"; + + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + + linux,keymap = <0x205006b + 0x4010074 + 0x3050072 + 0x1030004 + 0x502006a + 0x500000a + 0x5008b + 0x706001c + 0x405000b + 0x6070003 + 0x3040067 + 0x303006c + 0x60400e7 + 0x602009e + 0x4020073 + 0x5050002 + 0x4030069 + 0x3020008>; + }; + }; + }; + + i2c@80110000 { + bu21013_tp@0x5c { + compatible = "rhom,bu21013_tp"; + reg = <0x5c>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rhom,touch-max-x = <384>; + rhom,touch-max-y = <704>; + rhom,flip-y; + }; + + bu21013_tp@0x5d { + compatible = "rhom,bu21013_tp"; + reg = <0x5d>; + touch-gpio = <&gpio2 20 0x4>; + avdd-supply = <&ab8500_ldo_aux1_reg>; + + rhom,touch-max-x = <384>; + rhom,touch-max-y = <704>; + rhom,flip-y; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index 74b8a47adf91..43eb72af8948 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -262,9 +274,9 @@ }; }; - i2c@7000c400 { + hdmi_ddc: i2c@7000c400 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; i2c@7000c500 { @@ -369,13 +381,13 @@ regulator-max-microvolt = <1800000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -396,6 +408,11 @@ }; }; }; + + temperature-sensor@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; }; pmc { diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 331a3ef24d59..289480026fbf 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -6,6 +6,12 @@ model = "Avionic Design Plutux board"; compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20"; + host1x { + hdmi { + status = "okay"; + }; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 33ae81358d8e..eafeca65eb21 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -561,6 +561,12 @@ status = "okay"; }; + sdhci@c8000000 { + status = "okay"; + power-gpios = <&gpio 86 0>; /* gpio PK6 */ + bus-width = <4>; + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 5b3d8b157b33..a239ccdfaa52 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -8,6 +8,16 @@ reg = <0x00000000 0x20000000>; }; + host1x { + hdmi { + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -62,10 +72,6 @@ nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc"; - nvidia,function = "i2c2"; - }; dta { nvidia,pins = "dta", "dtd"; nvidia,function = "sdio2"; @@ -91,7 +97,7 @@ nvidia,function = "pcie"; }; hdint { - nvidia,pins = "hdint", "pta"; + nvidia,pins = "hdint"; nvidia,function = "hdmi"; }; i2cp { @@ -230,6 +236,39 @@ nvidia,pull = <1>; }; }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; }; i2s@70002800 { @@ -246,6 +285,36 @@ status = "okay"; }; + i2c@7000c400 { + clock-frequency = <100000>; + status = "okay"; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + hdmi_ddc: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2c@7000d000 { clock-frequency = <400000>; status = "okay"; @@ -348,13 +417,13 @@ regulator-max-microvolt = <2850000>; }; - ldo7 { + hdmi_vdd_reg: ldo7 { regulator-name = "vdd_ldo7,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo8 { + hdmi_pll_reg: ldo8 { regulator-name = "vdd_ldo8,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -381,6 +450,11 @@ }; }; }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + }; }; pmc { diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 9aff31b0fe4a..402b21004bef 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -6,10 +6,13 @@ model = "Avionic Design Tamonten Evaluation Carrier"; compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; - i2c@7000c000 { - clock-frequency = <400000>; - status = "okay"; + host1x { + hdmi { + status = "okay"; + }; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; reg = <0x1a>; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 27fb8a67ea42..b70b4cb754c8 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x40000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -249,14 +261,24 @@ clock-frequency = <216000000>; }; - i2c@7000c000 { + dvi_ddc: i2c@7000c000 { status = "okay"; - clock-frequency = <400000>; + clock-frequency = <100000>; }; - i2c@7000c400 { + spi@7000c380 { status = "okay"; - clock-frequency = <400000>; + spi-max-frequency = <48000000>; + spi-flash@0 { + compatible = "winbond,w25q80bl"; + reg = <0>; + spi-max-frequency = <48000000>; + }; + }; + + hdmi_ddc: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; }; i2c@7000c500 { @@ -300,6 +322,30 @@ bus-width = <4>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + hdmi_vdd_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + hdmi_pll_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-trimslice"; nvidia,i2s-controller = <&tegra_i2s1>; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index 86854f1abd58..adc47547eaae 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -64,11 +64,6 @@ nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc", "owc", "spdi", "spdo", - "uac"; - nvidia,function = "rsvd2"; - }; dta { nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; nvidia,function = "vi"; @@ -98,7 +93,7 @@ nvidia,function = "pcie"; }; hdint { - nvidia,pins = "hdint", "pta"; + nvidia,pins = "hdint"; nvidia,function = "hdmi"; }; i2cp { @@ -129,6 +124,10 @@ "lspi", "lvp1", "lvs"; nvidia,function = "displaya"; }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; pmc { nvidia,pins = "pmc"; nvidia,function = "pwr_on"; @@ -237,6 +236,49 @@ "ld23_22"; nvidia,pull = <1>; }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <1>; + nvidia,low-power-mode = <3>; + nvidia,pull-down-strength = <31>; + nvidia,pull-up-strength = <31>; + nvidia,slew-rate-rising = <3>; + nvidia,slew-rate-falling = <3>; + }; + }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; }; }; @@ -281,6 +323,31 @@ clock-frequency = <400000>; }; + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; + + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + i2c@7000c500 { status = "okay"; clock-frequency = <400000>; @@ -406,6 +473,11 @@ }; }; }; + + temperature-sensor@4c { + compatible = "onnn,nct1008"; + reg = <0x4c>; + }; }; pmc { @@ -425,6 +497,12 @@ status = "okay"; }; + sdhci@c8000000 { + status = "okay"; + power-gpios = <&gpio 86 0>; /* gpio PK6 */ + bus-width = <4>; + }; + sdhci@c8000400 { status = "okay"; cd-gpios = <&gpio 69 0>; /* gpio PI5 */ diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 94a71c91beb5..20d576ecd555 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -10,6 +10,18 @@ reg = <0x00000000 0x20000000>; }; + host1x { + hdmi { + status = "okay"; + + vdd-supply = <&hdmi_vdd_reg>; + pll-supply = <&hdmi_pll_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = <&gpio 111 0>; /* PN7 */ + }; + }; + pinmux { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -246,6 +258,11 @@ clock-frequency = <216000000>; }; + hdmi_ddc: i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <100000>; @@ -356,7 +373,7 @@ regulator-always-on; }; - ldo6 { + hdmi_pll_reg: ldo6 { regulator-name = "nvvdd_ldo6,avdd_hdmi_pll"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -388,7 +405,7 @@ regulator-always-on; }; - ldo11 { + hdmi_vdd_reg: ldo11 { regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index f3a09d0d45bc..fba998e3954a 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -4,6 +4,102 @@ compatible = "nvidia,tegra20"; interrupt-parent = <&intc>; + host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe { + compatible = "nvidia,tegra20-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + }; + + vi { + compatible = "nvidia,tegra20-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + }; + + epp { + compatible = "nvidia,tegra20-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + }; + + isp { + compatible = "nvidia,tegra20-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + }; + + gr2d { + compatible = "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + }; + + gr3d { + compatible = "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + }; + + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + + rgb { + status = "disabled"; + }; + }; + + hdmi { + compatible = "nvidia,tegra20-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra20-dsi"; + reg = <0x54300000 0x00040000>; + status = "disabled"; + }; + }; + + cache-controller@50043000 { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <5 5 2>; + arm,tag-latency = <4 4 2>; + cache-unified; + cache-level = <2>; + }; + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 @@ -138,6 +234,16 @@ status = "disabled"; }; + spi@7000c380 { + compatible = "nvidia,tegra20-sflash"; + reg = <0x7000c380 0x80>; + interrupts = <0 39 0x04>; + nvidia,dma-request-selector = <&apbdma 11>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + i2c@7000c400 { compatible = "nvidia,tegra20-i2c"; reg = <0x7000c400 0x100>; @@ -165,6 +271,46 @@ status = "disabled"; }; + spi@7000d400 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000d480 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra20-slink"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pmc { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index dd4222f00eca..adc88aa50eb6 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -83,5 +83,11 @@ gpio = <&gpio 83 0>; /* GPIO PK3 */ }; }; + + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio 28 0>; /* gpio PD4 */ + bus-width = <4>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index 0828f097ca86..08163e145d57 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -95,4 +95,10 @@ gpio = <&gpio 232 0>; /* GPIO PDD0 */ }; }; + + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio 27 0>; /* gpio PD3 */ + bus-width = <4>; + }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index b1271a894327..bdb2a660f376 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -52,6 +52,22 @@ nvidia,pull = <2>; nvidia,tristate = <0>; }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4"; + nvidia,function = "sdmmc3"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", "sdmmc4_rst_n_pcc3"; @@ -81,6 +97,15 @@ nvidia,pull = <0>; nvidia,tristate = <0>; }; + sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <0>; + nvidia,pull-down-strength = <46>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = <1>; + nvidia,slew-rate-falling = <1>; + }; }; }; @@ -250,6 +275,16 @@ }; }; + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + spi-flash@1 { + compatible = "winbond,w25q32"; + reg = <1>; + spi-max-frequency = <20000000>; + }; + }; + ahub { i2s@70080400 { status = "okay"; @@ -384,6 +419,8 @@ regulator-name = "vdd_com"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; enable-active-high; gpio = <&gpio 24 0>; /* gpio PD0 */ vin-supply = <&sys_3v3_reg>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index df7f2270fc91..efa603d47a6a 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -4,6 +4,102 @@ compatible = "nvidia,tegra30"; interrupt-parent = <&intc>; + host1x { + compatible = "nvidia,tegra30-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + mpe { + compatible = "nvidia,tegra30-mpe"; + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + }; + + vi { + compatible = "nvidia,tegra30-vi"; + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + }; + + epp { + compatible = "nvidia,tegra30-epp"; + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + }; + + isp { + compatible = "nvidia,tegra30-isp"; + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + }; + + gr2d { + compatible = "nvidia,tegra30-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + }; + + gr3d { + compatible = "nvidia,tegra30-gr3d"; + reg = <0x54180000 0x00040000>; + }; + + dc@54200000 { + compatible = "nvidia,tegra30-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra30-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + + rgb { + status = "disabled"; + }; + }; + + hdmi { + compatible = "nvidia,tegra30-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra30-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra30-dsi"; + reg = <0x54300000 0x00040000>; + status = "disabled"; + }; + }; + + cache-controller@50043000 { + compatible = "arm,pl310-cache"; + reg = <0x50043000 0x1000>; + arm,data-latency = <6 6 2>; + arm,tag-latency = <5 5 2>; + cache-unified; + cache-level = <2>; + }; + intc: interrupt-controller { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 @@ -168,6 +264,66 @@ status = "disabled"; }; + spi@7000d400 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000d400 0x200>; + interrupts = <0 59 0x04>; + nvidia,dma-request-selector = <&apbdma 15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000d600 0x200>; + interrupts = <0 82 0x04>; + nvidia,dma-request-selector = <&apbdma 16>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000d480 0x200>; + interrupts = <0 83 0x04>; + nvidia,dma-request-selector = <&apbdma 17>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000da00 0x200>; + interrupts = <0 93 0x04>; + nvidia,dma-request-selector = <&apbdma 18>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000dc00 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000dc00 0x200>; + interrupts = <0 94 0x04>; + nvidia,dma-request-selector = <&apbdma 27>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi@7000de00 { + compatible = "nvidia,tegra30-slink", "nvidia,tegra20-slink"; + reg = <0x7000de00 0x200>; + interrupts = <0 79 0x04>; + nvidia,dma-request-selector = <&apbdma 28>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pmc { compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts new file mode 100644 index 000000000000..95892ec6c342 --- /dev/null +++ b/arch/arm/boot/dts/u9540.dts @@ -0,0 +1,72 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson U9540 platform with Device Tree"; + compatible = "st-ericsson,u9540"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + mmc-cap-sd-highspeed; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + + cd-gpios = <&gpio7 6 0x4>; // 230 + cd-inverted; + + status = "okay"; + }; + + + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <4>; + + status = "okay"; + }; + + // On-board eMMC + sdi4_per2@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi new file mode 100644 index 000000000000..401c1262d4ed --- /dev/null +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/include/ "skeleton.dtsi" + +/ { + compatible = "xlnx,zynq-7000"; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + ranges; + + intc: interrupt-controller@f8f01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <1>; + interrupt-controller; + reg = <0xF8F01000 0x1000>, + <0xF8F00100 0x100>; + }; + + L2: cache-controller { + compatible = "arm,pl310-cache"; + reg = <0xF8F02000 0x1000>; + arm,data-latency = <2 3 2>; + arm,tag-latency = <2 3 2>; + cache-unified; + cache-level = <2>; + }; + + uart0: uart@e0000000 { + compatible = "xlnx,xuartps"; + reg = <0xE0000000 0x1000>; + interrupts = <0 27 4>; + clock = <50000000>; + }; + + uart1: uart@e0001000 { + compatible = "xlnx,xuartps"; + reg = <0xE0001000 0x1000>; + interrupts = <0 50 4>; + clock = <50000000>; + }; + + slcr: slcr@f8000000 { + compatible = "xlnx,zynq-slcr"; + reg = <0xF8000000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ps_clk: ps_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + /* clock-frequency set in board-specific file */ + clock-output-names = "ps_clk"; + }; + armpll: armpll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x100 0x110>; + clock-output-names = "armpll"; + }; + ddrpll: ddrpll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x104 0x114>; + clock-output-names = "ddrpll"; + }; + iopll: iopll { + #clock-cells = <0>; + compatible = "xlnx,zynq-pll"; + clocks = <&ps_clk>; + reg = <0x108 0x118>; + clock-output-names = "iopll"; + }; + uart_clk: uart_clk { + #clock-cells = <1>; + compatible = "xlnx,zynq-periph-clock"; + clocks = <&iopll &armpll &ddrpll>; + reg = <0x154>; + clock-output-names = "uart0_ref_clk", + "uart1_ref_clk"; + }; + cpu_clk: cpu_clk { + #clock-cells = <1>; + compatible = "xlnx,zynq-cpu-clock"; + clocks = <&iopll &armpll &ddrpll>; + reg = <0x120 0x1C4>; + clock-output-names = "cpu_6x4x", + "cpu_3x2x", + "cpu_2x", + "cpu_1x"; + }; + }; + }; + + ttc0: ttc0@f8001000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "xlnx,ttc"; + reg = <0xF8001000 0x1000>; + clocks = <&cpu_clk 3>; + clock-names = "cpu_1x"; + clock-ranges; + + ttc0_0: ttc0.0 { + status = "disabled"; + reg = <0>; + interrupts = <0 10 4>; + }; + ttc0_1: ttc0.1 { + status = "disabled"; + reg = <1>; + interrupts = <0 11 4>; + }; + ttc0_2: ttc0.2 { + status = "disabled"; + reg = <2>; + interrupts = <0 12 4>; + }; + }; + + ttc1: ttc1@f8002000 { + #interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <0>; + compatible = "xlnx,ttc"; + reg = <0xF8002000 0x1000>; + clocks = <&cpu_clk 3>; + clock-names = "cpu_1x"; + clock-ranges; + + ttc1_0: ttc1.0 { + status = "disabled"; + reg = <0>; + interrupts = <0 37 4>; + }; + ttc1_1: ttc1.1 { + status = "disabled"; + reg = <1>; + interrupts = <0 38 4>; + }; + ttc1_2: ttc1.2 { + status = "disabled"; + reg = <2>; + interrupts = <0 39 4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts deleted file mode 100644 index 574bc044f572..000000000000 --- a/arch/arm/boot/dts/zynq-ep107.dts +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 2011 Xilinx - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/dts-v1/; -/ { - model = "Xilinx Zynq EP107"; - compatible = "xlnx,zynq-ep107"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - memory { - device_type = "memory"; - reg = <0x0 0x10000000>; - }; - - chosen { - bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk"; - linux,stdout-path = &uart0; - }; - - amba { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - intc: interrupt-controller@f8f01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <1>; - interrupt-controller; - reg = <0xF8F01000 0x1000>, - <0xF8F00100 0x100>; - }; - - L2: cache-controller { - compatible = "arm,pl310-cache"; - reg = <0xF8F02000 0x1000>; - arm,data-latency = <2 3 2>; - arm,tag-latency = <2 3 2>; - cache-unified; - cache-level = <2>; - }; - - uart0: uart@e0000000 { - compatible = "xlnx,xuartps"; - reg = <0xE0000000 0x1000>; - interrupts = <0 27 4>; - clock = <50000000>; - }; - }; -}; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts new file mode 100644 index 000000000000..c772942a399a --- /dev/null +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2011 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Zynq ZC702 Development Board"; + compatible = "xlnx,zynq-zc702", "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS1,115200 earlyprintk"; + }; + +}; + +&ps_clk { + clock-frequency = <33333330>; +}; + +&ttc0_0 { + status = "ok"; + compatible = "xlnx,ttc-counter-clocksource"; +}; + +&ttc0_1 { + status = "ok"; + compatible = "xlnx,ttc-counter-clockevent"; +}; diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig index 40db34cf2771..0b7ee92c5713 100644 --- a/arch/arm/configs/dove_defconfig +++ b/arch/arm/configs/dove_defconfig @@ -8,11 +8,19 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_DOVE=y CONFIG_MACH_DOVE_DB=y +CONFIG_MACH_CM_A510=y +CONFIG_MACH_DOVE_DT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_HIGHMEM=y +CONFIG_USE_OF=y +CONFIG_ATAGS=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -62,6 +70,9 @@ CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -74,6 +85,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_IO_ACCESSORS=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_DOVE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MV=y CONFIG_DMADEVICES=y @@ -122,6 +145,7 @@ CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_MV_CESA=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index 74eee0c78f28..93f3794ba5cb 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -27,6 +27,14 @@ CONFIG_MACH_GOFLEXNET_DT=y CONFIG_MACH_LSXL_DT=y CONFIG_MACH_IOMEGA_IX2_200_DT=y CONFIG_MACH_KM_KIRKWOOD_DT=y +CONFIG_MACH_INETSPACE_V2_DT=y +CONFIG_MACH_MPLCEC4_DT=y +CONFIG_MACH_NETSPACE_V2_DT=y +CONFIG_MACH_NETSPACE_MAX_V2_DT=y +CONFIG_MACH_NETSPACE_LITE_V2_DT=y +CONFIG_MACH_NETSPACE_MINI_V2_DT=y +CONFIG_MACH_OPENBLOCKS_A6_DT=y +CONFIG_MACH_TOPKICK_DT=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y CONFIG_MACH_DOCKSTAR=y @@ -40,6 +48,7 @@ CONFIG_MACH_D2NET_V2=y CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y +CONFIG_MACH_NSA310_DT=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 048aaca60814..7bf535104e26 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -61,6 +61,8 @@ CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_ENC28J60=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC95XX=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set @@ -158,6 +160,10 @@ CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_15=y CONFIG_PRINTK_TIME=y CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index cd5e6ba9a54d..952430d9e2d9 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,8 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set CONFIG_PROFILING=y @@ -10,6 +11,8 @@ CONFIG_KPROBES=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_BSD_DISKLABEL=y CONFIG_ARCH_ORION5X=y CONFIG_MACH_DB88F5281=y CONFIG_MACH_RD88F5182=y @@ -24,7 +27,7 @@ CONFIG_MACH_TS409=y CONFIG_MACH_WRT350N_V2=y CONFIG_MACH_TS78XX=y CONFIG_MACH_MV2120=y -CONFIG_MACH_EDMINI_V2=y +CONFIG_MACH_EDMINI_V2_DT=y CONFIG_MACH_D2NET=y CONFIG_MACH_BIGDISK=y CONFIG_MACH_NET2BIG=y @@ -33,17 +36,13 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y CONFIG_FPE_NWFPE=y CONFIG_VFP=y -# CONFIG_SUSPEND is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -54,13 +53,10 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6131=y -CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_PKTGEN=m CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -82,12 +78,11 @@ CONFIG_CHR_DEV_SG=m CONFIG_ATA=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NET_PCI=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set +CONFIG_MARVELL_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -95,11 +90,12 @@ CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set # CONFIG_VT is not set +CONFIG_LEGACY_PTY_COUNT=16 CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -109,10 +105,8 @@ CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_LM75=y # CONFIG_VGA_ARB is not set CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_PRINTER=y CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y @@ -140,7 +134,6 @@ CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set CONFIG_EXT4_FS=m -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -150,25 +143,18 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_ECB=m diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index da6845493caa..6fe7ede6f0c2 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -76,6 +76,7 @@ CONFIG_AB8500_CORE=y CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y # CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y CONFIG_AB8500_USB=y diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S index 0b65d792f664..0c4e17d4d359 100644 --- a/arch/arm/include/debug/imx.S +++ b/arch/arm/include/debug/imx.S @@ -10,6 +10,20 @@ * published by the Free Software Foundation. * */ +#define IMX6Q_UART1_BASE_ADDR 0x02020000 +#define IMX6Q_UART2_BASE_ADDR 0x021e8000 +#define IMX6Q_UART3_BASE_ADDR 0x021ec000 +#define IMX6Q_UART4_BASE_ADDR 0x021f0000 +#define IMX6Q_UART5_BASE_ADDR 0x021f4000 + +/* + * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion + * of IMX6Q_UART##n##_BASE_ADDR. + */ +#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR +#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n) +#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT) + #ifdef CONFIG_DEBUG_IMX1_UART #define UART_PADDR 0x00206000 #elif defined (CONFIG_DEBUG_IMX25_UART) @@ -22,10 +36,8 @@ #define UART_PADDR 0x73fbc000 #elif defined (CONFIG_DEBUG_IMX50_IMX53_UART) #define UART_PADDR 0x53fbc000 -#elif defined (CONFIG_DEBUG_IMX6Q_UART2) -#define UART_PADDR 0x021e8000 -#elif defined (CONFIG_DEBUG_IMX6Q_UART4) -#define UART_PADDR 0x021f0000 +#elif defined (CONFIG_DEBUG_IMX6Q_UART) +#define UART_PADDR IMX6Q_DEBUG_UART_BASE #endif /* diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index f8eecb959413..0153950f6068 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -58,6 +58,14 @@ config ARCH_DAVINCI_TNETV107X comment "DaVinci Board Type" +config MACH_DA8XX_DT + bool "Support DA8XX platforms using device tree" + default y + depends on ARCH_DAVINCI_DA8XX + help + Say y here to include support for TI DaVinci DA850 based using + Flattened Device Tree. More information at Documentation/devicetree + config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2227effcb0e9..fb5c1aa98a63 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -22,6 +22,7 @@ obj-$(CONFIG_AINTC) += irq.o obj-$(CONFIG_CP_INTC) += cp_intc.o # Board specific +obj-$(CONFIG_MACH_DA8XX_DT) += da8xx-dt.o obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o obj-$(CONFIG_MACH_NEUROS_OSD2) += board-neuros-osd2.o diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 88ebea89abdf..cdf8d0746e79 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -324,7 +324,7 @@ static __init void dm355_evm_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 2f88103c6459..d41954507fc2 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -246,7 +246,7 @@ static __init void dm355_leopard_init(void) if (IS_ERR(aemif)) WARN("%s: unable to get AEMIF clock\n", __func__); else - clk_enable(aemif); + clk_prepare_enable(aemif); platform_add_devices(davinci_leopard_devices, ARRAY_SIZE(davinci_leopard_devices)); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1b4a8adcfdc9..5d49c75388ca 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -478,7 +478,7 @@ static void __init evm_init_cpld(void) aemif_clk = clk_get(NULL, "aemif"); if (IS_ERR(aemif_clk)) return; - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (request_mem_region(DM365_ASYNC_EMIF_DATA_CE1_BASE, SECTION_SIZE, "cpld") == NULL) @@ -489,7 +489,7 @@ static void __init evm_init_cpld(void) SECTION_SIZE); fail: pr_err("ERROR: can't map CPLD\n"); - clk_disable(aemif_clk); + clk_disable_unprepare(aemif_clk); return; } diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index f22572cee49d..a84dfcbc1154 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -776,7 +776,7 @@ static __init void davinci_evm_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND || HAS_NOR) diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 144bf31d68dd..3e3e3afebf88 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -188,7 +188,7 @@ static __init void davinci_ntosd2_init(void) struct davinci_soc_info *soc_info = &davinci_soc_info; aemif_clk = clk_get(NULL, "aemif"); - clk_enable(aemif_clk); + clk_prepare_enable(aemif_clk); if (HAS_ATA) { if (HAS_NAND) diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b90c172d5541..68c5fe01857c 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -212,6 +212,12 @@ static struct clk tptc2_clk = { .flags = ALWAYS_ENABLED, }; +static struct clk pruss_clk = { + .name = "pruss", + .parent = &pll0_sysclk2, + .lpsc = DA8XX_LPSC0_PRUSS, +}; + static struct clk uart0_clk = { .name = "uart0", .parent = &pll0_sysclk2, @@ -385,6 +391,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "tptc1", &tptc1_clk), CLK(NULL, "tpcc1", &tpcc1_clk), CLK(NULL, "tptc2", &tptc2_clk), + CLK("pruss_uio", "pruss", &pruss_clk), CLK(NULL, "uart0", &uart0_clk), CLK(NULL, "uart1", &uart1_clk), CLK(NULL, "uart2", &uart2_clk), @@ -781,12 +788,6 @@ static struct map_desc da850_io_desc[] = { .length = DA8XX_CP_INTC_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(DA8XX_ARM_RAM_BASE), - .length = SZ_8K, - .type = MT_DEVICE - }, }; static u32 da850_psc_bases[] = { DA8XX_PSC0_BASE, DA8XX_PSC1_BASE }; @@ -1239,8 +1240,8 @@ static struct davinci_soc_info davinci_soc_info_da850 = { .gpio_irq = IRQ_DA8XX_GPIO0, .serial_dev = &da8xx_serial_device, .emac_pdata = &da8xx_emac_pdata, - .sram_dma = DA8XX_ARM_RAM_BASE, - .sram_len = SZ_8K, + .sram_dma = DA8XX_SHARED_RAM_BASE, + .sram_len = SZ_128K, }; void __init da850_init(void) diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c new file mode 100644 index 000000000000..37c27af18fa0 --- /dev/null +++ b/arch/arm/mach-davinci/da8xx-dt.c @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * Modified from mach-omap/omap2/board-generic.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/io.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/irqdomain.h> + +#include <asm/mach/arch.h> + +#include <mach/common.h> +#include <mach/cp_intc.h> +#include <mach/da8xx.h> + +#define DA8XX_NUM_UARTS 3 + +void __init da8xx_uart_clk_enable(void) +{ + int i; + for (i = 0; i < DA8XX_NUM_UARTS; i++) + davinci_serial_setup_clk(i, NULL); +} + +static struct of_device_id da8xx_irq_match[] __initdata = { + { .compatible = "ti,cp-intc", .data = cp_intc_of_init, }, + { } +}; + +static void __init da8xx_init_irq(void) +{ + of_irq_init(da8xx_irq_match); +} + +#ifdef CONFIG_ARCH_DAVINCI_DA850 + +static void __init da850_init_machine(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + + da8xx_uart_clk_enable(); +} + +static const char *da850_boards_compat[] __initdata = { + "enbw,cmc", + "ti,da850-evm", + "ti,da850", + NULL, +}; + +DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x") + .map_io = da850_init, + .init_irq = da8xx_init_irq, + .timer = &davinci_timer, + .init_machine = da850_init_machine, + .dt_compat = da850_boards_compat, + .init_late = davinci_init_late, + .restart = da8xx_restart, +MACHINE_END + +#endif diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index bd2f72b414bc..46c9a0c09ae5 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -22,6 +22,7 @@ #include <mach/time.h> #include <mach/da8xx.h> #include <mach/cpuidle.h> +#include <mach/sram.h> #include "clock.h" #include "asp.h" @@ -32,6 +33,7 @@ #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 #define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_PRUSS_MEM_BASE 0x01c30000 #define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 @@ -518,6 +520,75 @@ void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) } } +static struct resource da8xx_pruss_resources[] = { + { + .start = DA8XX_PRUSS_MEM_BASE, + .end = DA8XX_PRUSS_MEM_BASE + 0xFFFF, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA8XX_EVTOUT0, + .end = IRQ_DA8XX_EVTOUT0, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT1, + .end = IRQ_DA8XX_EVTOUT1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT2, + .end = IRQ_DA8XX_EVTOUT2, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT3, + .end = IRQ_DA8XX_EVTOUT3, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT4, + .end = IRQ_DA8XX_EVTOUT4, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT5, + .end = IRQ_DA8XX_EVTOUT5, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT6, + .end = IRQ_DA8XX_EVTOUT6, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA8XX_EVTOUT7, + .end = IRQ_DA8XX_EVTOUT7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct uio_pruss_pdata da8xx_uio_pruss_pdata = { + .pintc_base = 0x4000, +}; + +static struct platform_device da8xx_uio_pruss_dev = { + .name = "pruss_uio", + .id = -1, + .num_resources = ARRAY_SIZE(da8xx_pruss_resources), + .resource = da8xx_pruss_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &da8xx_uio_pruss_pdata, + } +}; + +int __init da8xx_register_uio_pruss(void) +{ + da8xx_uio_pruss_pdata.sram_pool = sram_get_gen_pool(); + return platform_device_register(&da8xx_uio_pruss_dev); +} + static const struct display_panel disp_panel = { QVGA, 16, @@ -900,7 +971,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) if (IS_ERR(da850_sata_clk)) return PTR_ERR(da850_sata_clk); - ret = clk_enable(da850_sata_clk); + ret = clk_prepare_enable(da850_sata_clk); if (ret) goto err0; @@ -931,7 +1002,7 @@ static int da850_sata_init(struct device *dev, void __iomem *addr) return 0; err1: - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); err0: clk_put(da850_sata_clk); return ret; @@ -939,7 +1010,7 @@ err0: static void da850_sata_exit(struct device *dev) { - clk_disable(da850_sata_clk); + clk_disable_unprepare(da850_sata_clk); clk_put(da850_sata_clk); } diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index a255434908db..b49c3b77d55e 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -758,12 +758,6 @@ static struct map_desc dm355_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index b680c832e0ba..6c3980540be0 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -985,12 +985,6 @@ static struct map_desc dm365_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; static struct resource dm365_ks_resources[] = { diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index 14e9947bad6e..11c79a3362ef 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -785,12 +785,6 @@ static struct map_desc dm644x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00008000), - .length = SZ_16K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 97c0f8e555bd..ac7b431c4c8e 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -756,12 +756,6 @@ static struct map_desc dm646x_io_desc[] = { .length = IO_SIZE, .type = MT_DEVICE }, - { - .virtual = SRAM_VIRT, - .pfn = __phys_to_pfn(0x00010000), - .length = SZ_32K, - .type = MT_MEMORY_NONCACHED, - }, }; /* Contents of JTAG ID register used to identify exact cpu type */ diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h index bdc4aa8e672a..046c7238a3d6 100644 --- a/arch/arm/mach-davinci/include/mach/common.h +++ b/arch/arm/mach-davinci/include/mach/common.h @@ -104,8 +104,6 @@ int davinci_pm_init(void); static inline int davinci_pm_init(void) { return 0; } #endif -/* standard place to map on-chip SRAMs; they *may* support DMA */ -#define SRAM_VIRT 0xfffe0000 #define SRAM_SIZE SZ_128K #endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */ diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index aaccdc4528fc..700d311c6854 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -26,6 +26,7 @@ #include <linux/platform_data/mmc-davinci.h> #include <linux/platform_data/usb-davinci.h> #include <linux/platform_data/spi-davinci.h> +#include <linux/platform_data/uio_pruss.h> #include <media/davinci/vpif_types.h> @@ -72,6 +73,7 @@ extern unsigned int da850_max_speed; #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 +#define DA8XX_SHARED_RAM_BASE 0x80000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); @@ -86,6 +88,7 @@ int da8xx_register_watchdog(void); int da8xx_register_usb20(unsigned mA, unsigned potpgt); int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata); int da8xx_register_emac(void); +int da8xx_register_uio_pruss(void); int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata); int da8xx_register_mmcsd0(struct davinci_mmc_config *config); int da850_register_mmcsd1(struct davinci_mmc_config *config); diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h index 46b3cd11c3c2..2d9d921e8b01 100644 --- a/arch/arm/mach-davinci/include/mach/serial.h +++ b/arch/arm/mach-davinci/include/mach/serial.h @@ -43,6 +43,7 @@ struct davinci_uart_config { }; extern int davinci_serial_init(struct davinci_uart_config *); +extern int davinci_serial_setup_clk(unsigned instance, unsigned int *rate); #endif #endif /* __ASM_ARCH_SERIAL_H */ diff --git a/arch/arm/mach-davinci/include/mach/sram.h b/arch/arm/mach-davinci/include/mach/sram.h index 111f7cc71e07..4e5db56218b8 100644 --- a/arch/arm/mach-davinci/include/mach/sram.h +++ b/arch/arm/mach-davinci/include/mach/sram.h @@ -24,4 +24,7 @@ extern void *sram_alloc(size_t len, dma_addr_t *dma); extern void sram_free(void *addr, size_t len); +/* Get the struct gen_pool * for use in platform data */ +extern struct gen_pool *sram_get_gen_pool(void); + #endif /* __MACH_SRAM_H */ diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c index 1875740fe27c..f2625814c3c9 100644 --- a/arch/arm/mach-davinci/serial.c +++ b/arch/arm/mach-davinci/serial.c @@ -70,11 +70,33 @@ static void __init davinci_serial_reset(struct plat_serial8250_port *p) UART_DM646X_SCR_TX_WATERMARK); } -int __init davinci_serial_init(struct davinci_uart_config *info) +/* Enable UART clock and obtain its rate */ +int __init davinci_serial_setup_clk(unsigned instance, unsigned int *rate) { - int i; char name[16]; - struct clk *uart_clk; + struct clk *clk; + struct davinci_soc_info *soc_info = &davinci_soc_info; + struct device *dev = &soc_info->serial_dev->dev; + + sprintf(name, "uart%d", instance); + clk = clk_get(dev, name); + if (IS_ERR(clk)) { + pr_err("%s:%d: failed to get UART%d clock\n", + __func__, __LINE__, instance); + return PTR_ERR(clk); + } + + clk_prepare_enable(clk); + + if (rate) + *rate = clk_get_rate(clk); + + return 0; +} + +int __init davinci_serial_init(struct davinci_uart_config *info) +{ + int i, ret; struct davinci_soc_info *soc_info = &davinci_soc_info; struct device *dev = &soc_info->serial_dev->dev; struct plat_serial8250_port *p = dev->platform_data; @@ -87,16 +109,9 @@ int __init davinci_serial_init(struct davinci_uart_config *info) if (!(info->enabled_uarts & (1 << i))) continue; - sprintf(name, "uart%d", i); - uart_clk = clk_get(dev, name); - if (IS_ERR(uart_clk)) { - printk(KERN_ERR "%s:%d: failed to get UART%d clock\n", - __func__, __LINE__, i); + ret = davinci_serial_setup_clk(i, &p->uartclk); + if (ret) continue; - } - - clk_enable(uart_clk); - p->uartclk = clk_get_rate(uart_clk); if (!p->membase && p->mapbase) { p->membase = ioremap(p->mapbase, SZ_4K); diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c index db0f7787faf1..c5f7ee5cc80a 100644 --- a/arch/arm/mach-davinci/sram.c +++ b/arch/arm/mach-davinci/sram.c @@ -10,6 +10,7 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/genalloc.h> #include <mach/common.h> @@ -17,6 +18,11 @@ static struct gen_pool *sram_pool; +struct gen_pool *sram_get_gen_pool(void) +{ + return sram_pool; +} + void *sram_alloc(size_t len, dma_addr_t *dma) { unsigned long vaddr; @@ -32,7 +38,7 @@ void *sram_alloc(size_t len, dma_addr_t *dma) return NULL; if (dma) - *dma = dma_base + (vaddr - SRAM_VIRT); + *dma = gen_pool_virt_to_phys(sram_pool, vaddr); return (void *)vaddr; } @@ -53,8 +59,10 @@ EXPORT_SYMBOL(sram_free); */ static int __init sram_init(void) { + phys_addr_t phys = davinci_soc_info.sram_dma; unsigned len = davinci_soc_info.sram_len; int status = 0; + void *addr; if (len) { len = min_t(unsigned, len, SRAM_SIZE); @@ -62,8 +70,17 @@ static int __init sram_init(void) if (!sram_pool) status = -ENOMEM; } - if (sram_pool) - status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1); + + if (sram_pool) { + addr = ioremap(phys, len); + if (!addr) + return -ENOMEM; + status = gen_pool_add_virt(sram_pool, (unsigned)addr, + phys, len, -1); + if (status < 0) + iounmap(addr); + } + WARN_ON(status < 0); return status; } diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 75da315b6587..9847938785ca 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -379,7 +379,7 @@ static void __init davinci_timer_init(void) timer_clk = clk_get(NULL, "timer0"); BUG_ON(IS_ERR(timer_clk)); - clk_enable(timer_clk); + clk_prepare_enable(timer_clk); /* init timer hw */ timer_init(); @@ -429,7 +429,7 @@ void davinci_watchdog_reset(struct platform_device *pdev) wd_clk = clk_get(&pdev->dev, NULL); if (WARN_ON(IS_ERR(wd_clk))) return; - clk_enable(wd_clk); + clk_prepare_enable(wd_clk); /* disable, internal clock source */ __raw_writel(0, base + TCR); diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index da55107033dd..bb3b09aa9183 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -63,6 +63,7 @@ config SOC_EXYNOS5250 depends on ARCH_EXYNOS5 select S5P_PM if PM select S5P_SLEEP if PM + select S5P_DEV_MFC select SAMSUNG_DMADEV help Enable EXYNOS5250 SoC support diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile index 9b58024f7d43..1797dee88a0d 100644 --- a/arch/arm/mach-exynos/Makefile +++ b/arch/arm/mach-exynos/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o -obj-$(CONFIG_EXYNOS_DEV_DRM) += dev-drm.o obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index fa8a13405c94..efead60b9436 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -576,6 +576,10 @@ static struct clk exynos4_init_clocks_off[] = { .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 15), }, { + .name = "tmu_apbif", + .enable = exynos4_clk_ip_perir_ctrl, + .ctrlbit = (1 << 17), + }, { .name = "keypad", .enable = exynos4_clk_ip_perir_ctrl, .ctrlbit = (1 << 16), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index 4478757b9301..7652f5d78a56 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -196,6 +196,11 @@ static int exynos5_clk_ip_isp1_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ISP1, clk, enable); } +static int exynos5_clk_hdmiphy_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); +} + /* Core list of CMU_CPU side */ static struct clksrc_clk exynos5_clk_mout_apll = { @@ -616,6 +621,11 @@ static struct clk exynos5_init_clocks_off[] = { .enable = exynos5_clk_ip_peric_ctrl, .ctrlbit = (1 << 24), }, { + .name = "tmu_apbif", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peris_ctrl, + .ctrlbit = (1 << 21), + }, { .name = "rtc", .parent = &exynos5_clk_aclk_66.clk, .enable = exynos5_clk_ip_peris_ctrl, @@ -664,17 +674,22 @@ static struct clk exynos5_init_clocks_off[] = { .ctrlbit = (1 << 25), }, { .name = "mfc", - .devname = "s5p-mfc", + .devname = "s5p-mfc-v6", .enable = exynos5_clk_ip_mfc_ctrl, .ctrlbit = (1 << 0), }, { .name = "hdmi", - .devname = "exynos4-hdmi", + .devname = "exynos5-hdmi", .enable = exynos5_clk_ip_disp1_ctrl, .ctrlbit = (1 << 6), }, { + .name = "hdmiphy", + .devname = "exynos5-hdmi", + .enable = exynos5_clk_hdmiphy_ctrl, + .ctrlbit = (1 << 0), + }, { .name = "mixer", - .devname = "s5p-mixer", + .devname = "exynos5-mixer", .enable = exynos5_clk_ip_disp1_ctrl, .ctrlbit = (1 << 5), }, { diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 0dbee7fef9bd..4e1dd8d1eda8 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -955,11 +955,14 @@ static int __init exynos_init_irq_eint(void) * platforms switch over to using the pinctrl driver, the wakeup * interrupt support code here can be completely removed. */ + static const struct of_device_id exynos_pinctrl_ids[] = { + { .compatible = "samsung,pinctrl-exynos4210", }, + { .compatible = "samsung,pinctrl-exynos4x12", }, + }; struct device_node *pctrl_np, *wkup_np; - const char *pctrl_compat = "samsung,pinctrl-exynos4210"; const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; - for_each_compatible_node(pctrl_np, NULL, pctrl_compat) { + for_each_matching_node(pctrl_np, exynos_pinctrl_ids) { if (of_device_is_available(pctrl_np)) { wkup_np = of_find_compatible_node(pctrl_np, NULL, wkup_compat); diff --git a/arch/arm/mach-exynos/dev-drm.c b/arch/arm/mach-exynos/dev-drm.c deleted file mode 100644 index 17c9c6ecc2e0..000000000000 --- a/arch/arm/mach-exynos/dev-drm.c +++ /dev/null @@ -1,29 +0,0 @@ -/* - * linux/arch/arm/mach-exynos/dev-drm.c - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - core DRM device - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <plat/devs.h> - -static u64 exynos_drm_dma_mask = DMA_BIT_MASK(32); - -struct platform_device exynos_device_drm = { - .name = "exynos-drm", - .dev = { - .dma_mask = &exynos_drm_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - } -}; diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 6da31152de3a..5d44616c2014 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -136,6 +136,9 @@ #define EXYNOS4_IRQ_TSI IRQ_SPI(115) #define EXYNOS4_IRQ_SATA IRQ_SPI(116) +#define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4) +#define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4) + #define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) #define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1) #define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2) diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 872840b2ff45..9f180aa3a848 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -88,6 +88,8 @@ #define EXYNOS4_PA_TWD 0x10500600 #define EXYNOS4_PA_L2CC 0x10502000 +#define EXYNOS4_PA_TMU 0x100C0000 + #define EXYNOS4_PA_MDMA0 0x10810000 #define EXYNOS4_PA_MDMA1 0x12850000 #define EXYNOS4_PA_S_MDMA1 0x12840000 diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index eadf4b59e7d2..8858068d2b6a 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -77,6 +77,8 @@ static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-tmu", EXYNOS4_PA_TMU, + "exynos-tmu", NULL), {}, }; @@ -94,6 +96,8 @@ static void __init exynos4_dt_machine_init(void) static char const *exynos4_dt_compat[] __initdata = { "samsung,exynos4210", + "samsung,exynos4212", + "samsung,exynos4412", NULL }; diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index db1cd8eacf28..25f464cf7979 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -11,6 +11,8 @@ #include <linux/of_platform.h> #include <linux/serial_core.h> +#include <linux/memblock.h> +#include <linux/of_fdt.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> @@ -18,6 +20,7 @@ #include <plat/cpu.h> #include <plat/regs-serial.h> +#include <plat/mfc.h> #include "common.h" @@ -47,6 +50,20 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "s3c2440-i2c.0", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1), "s3c2440-i2c.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(2), + "s3c2440-i2c.2", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(3), + "s3c2440-i2c.3", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(4), + "s3c2440-i2c.4", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(5), + "s3c2440-i2c.5", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(6), + "s3c2440-i2c.6", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(7), + "s3c2440-i2c.7", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-hdmiphy-i2c", EXYNOS5_PA_IIC(8), + "s3c2440-hdmiphy-i2c", NULL), OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0, "dw_mmc.0", NULL), OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1, @@ -61,6 +78,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos4210-spi.1", NULL), OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2, "exynos4210-spi.2", NULL), + OF_DEV_AUXDATA("samsung,exynos5-sata-ahci", 0x122F0000, + "exynos5-sata", NULL), + OF_DEV_AUXDATA("samsung,exynos5-sata-phy", 0x12170000, + "exynos5-sata-phy", NULL), + OF_DEV_AUXDATA("samsung,exynos5-sata-phy-i2c", 0x121D0000, + "exynos5-sata-phy-i2c", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), @@ -72,6 +95,13 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos-gsc.2", NULL), OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3, "exynos-gsc.3", NULL), + OF_DEV_AUXDATA("samsung,exynos5-hdmi", 0x14530000, + "exynos5-hdmi", NULL), + OF_DEV_AUXDATA("samsung,exynos5-mixer", 0x14450000, + "exynos5-mixer", NULL), + OF_DEV_AUXDATA("samsung,mfc-v6", 0x11000000, "s5p-mfc-v6", NULL), + OF_DEV_AUXDATA("samsung,exynos5250-tmu", 0x10060000, + "exynos-tmu", NULL), {}, }; @@ -92,6 +122,17 @@ static char const *exynos5250_dt_compat[] __initdata = { NULL }; +static void __init exynos5_reserve(void) +{ + struct s5p_mfc_dt_meminfo mfc_mem; + + /* Reserve memory for MFC only if it's available */ + mfc_mem.compatible = "samsung,mfc-v6"; + if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem)) + s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff, + mfc_mem.lsize); +} + DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ .init_irq = exynos5_init_irq, @@ -103,4 +144,5 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") .timer = &exynos4_timer, .dt_compat = exynos5250_dt_compat, .restart = exynos5_restart, + .reserve = exynos5_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 69359a0c8a1c..27d4ed8b116e 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -1326,9 +1326,6 @@ static struct platform_device *nuri_devices[] __initdata = { &cam_vdda_fixed_rdev, &cam_8m_12v_fixed_rdev, &exynos4_bus_devfreq, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif }; static void __init nuri_map_io(void) diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 485ce6c477f9..c931ce15a966 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -709,9 +709,6 @@ static struct platform_device *origen_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &s5p_device_mixer, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif &exynos4_device_ohci, &origen_device_gpiokeys, &origen_lcd_hv070wsa, diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index ddb92631252d..a1555a73c7af 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -317,9 +317,6 @@ static struct platform_device *smdk4x12_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif &samsung_device_keypad, }; diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 8dd6a1e8030d..063cb94b934d 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -300,9 +300,6 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s5p_device_fimc_md, &s5p_device_g2d, &s5p_device_jpeg, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif &exynos4_device_ac97, &exynos4_device_i2s0, &exynos4_device_ohci, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 2d6bc83d5c99..9e3340f18950 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -1080,9 +1080,6 @@ static struct platform_device *universal_devices[] __initdata = { &s5p_device_onenand, &s5p_device_fimd0, &s5p_device_jpeg, -#ifdef CONFIG_DRM_EXYNOS - &exynos_device_drm, -#endif &s3c_device_usb_hsotg, &s5p_device_mfc, &s5p_device_mfc_l, diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index c0bc83a7663e..9f1351de52f7 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -19,6 +19,8 @@ #include <linux/pm_domain.h> #include <linux/delay.h> #include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/sched.h> #include <mach/regs-pmu.h> #include <plat/devs.h> @@ -83,12 +85,88 @@ static struct exynos_pm_domain PD = { \ } #ifdef CONFIG_OF +static void exynos_add_device_to_domain(struct exynos_pm_domain *pd, + struct device *dev) +{ + int ret; + + dev_dbg(dev, "adding to power domain %s\n", pd->pd.name); + + while (1) { + ret = pm_genpd_add_device(&pd->pd, dev); + if (ret != -EAGAIN) + break; + cond_resched(); + } + + pm_genpd_dev_need_restore(dev, true); +} + +static void exynos_remove_device_from_domain(struct device *dev) +{ + struct generic_pm_domain *genpd = dev_to_genpd(dev); + int ret; + + dev_dbg(dev, "removing from power domain %s\n", genpd->name); + + while (1) { + ret = pm_genpd_remove_device(genpd, dev); + if (ret != -EAGAIN) + break; + cond_resched(); + } +} + +static void exynos_read_domain_from_dt(struct device *dev) +{ + struct platform_device *pd_pdev; + struct exynos_pm_domain *pd; + struct device_node *node; + + node = of_parse_phandle(dev->of_node, "samsung,power-domain", 0); + if (!node) + return; + pd_pdev = of_find_device_by_node(node); + if (!pd_pdev) + return; + pd = platform_get_drvdata(pd_pdev); + exynos_add_device_to_domain(pd, dev); +} + +static int exynos_pm_notifier_call(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct device *dev = data; + + switch (event) { + case BUS_NOTIFY_BIND_DRIVER: + if (dev->of_node) + exynos_read_domain_from_dt(dev); + + break; + + case BUS_NOTIFY_UNBOUND_DRIVER: + exynos_remove_device_from_domain(dev); + + break; + } + return NOTIFY_DONE; +} + +static struct notifier_block platform_nb = { + .notifier_call = exynos_pm_notifier_call, +}; + static __init int exynos_pm_dt_parse_domains(void) { + struct platform_device *pdev; struct device_node *np; for_each_compatible_node(np, NULL, "samsung,exynos4210-pd") { struct exynos_pm_domain *pd; + int on; + + pdev = of_find_device_by_node(np); pd = kzalloc(sizeof(*pd), GFP_KERNEL); if (!pd) { @@ -97,15 +175,22 @@ static __init int exynos_pm_dt_parse_domains(void) return -ENOMEM; } - if (of_get_property(np, "samsung,exynos4210-pd-off", NULL)) - pd->is_off = true; - pd->name = np->name; + pd->pd.name = kstrdup(np->name, GFP_KERNEL); + pd->name = pd->pd.name; pd->base = of_iomap(np, 0); pd->pd.power_off = exynos_pd_power_off; pd->pd.power_on = exynos_pd_power_on; pd->pd.of_node = np; - pm_genpd_init(&pd->pd, NULL, false); + + platform_set_drvdata(pdev, pd); + + on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; + + pm_genpd_init(&pd->pd, NULL, !on); } + + bus_register_notifier(&platform_bus_type, &platform_nb); + return 0; } #else diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index f1bf610e2900..b09924112f99 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -272,6 +272,13 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD endchoice +config MACH_IMX25_DT + bool "Support i.MX25 platforms from device tree" + select SOC_IMX25 + help + Include support for Freescale i.MX25 based platforms + using the device tree for discovery + comment "MX27 platforms:" config MACH_MX27ADS @@ -829,7 +836,14 @@ config SOC_IMX53 config SOC_IMX6Q bool "i.MX6 Quad support" + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARM_CPU_SUSPEND if PM + select ARM_ERRATA_743622 + select ARM_ERRATA_751472 + select ARM_ERRATA_754322 + select ARM_ERRATA_764369 if SMP + select ARM_ERRATA_775420 select ARM_GIC select COMMON_CLK select CPU_V7 @@ -841,6 +855,10 @@ config SOC_IMX6Q select MFD_SYSCON select PINCTRL select PINCTRL_IMX6Q + select PL310_ERRATA_588369 if CACHE_PL310 + select PL310_ERRATA_727915 if CACHE_PL310 + select PL310_ERRATA_769419 if CACHE_PL310 + select PM_OPP if PM help This enables support for Freescale i.MX6 Quad processor. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index fe47b71469c9..0634b3152c24 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -50,6 +50,7 @@ obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o +obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o # i.MX27 based machines obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index bc885801cd68..b197aa73dc4b 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -23,6 +23,9 @@ #include <linux/io.h> #include <linux/clkdev.h> #include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include "clk.h" #include "common.h" @@ -55,6 +58,8 @@ #define ccm(x) (CRM_BASE + (x)) +static struct clk_onecell_data clk_data; + static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", }; static const char *per_sel_clks[] = { "ahb", "upll", }; @@ -64,24 +69,30 @@ enum mx25_clks { per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel, per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5, per6, per7, per8, per9, per10, per11, per12, per13, per14, per15, - csi_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, gpt_ipg_per, i2c_ipg_per, - lcdc_ipg_per, nfc_ipg_per, ssi1_ipg_per, ssi2_ipg_per, uart_ipg_per, - csi_ahb, esdhc1_ahb, esdhc2_ahb, fec_ahb, lcdc_ahb, sdma_ahb, - usbotg_ahb, can1_ipg, can2_ipg, csi_ipg, cspi1_ipg, cspi2_ipg, - cspi3_ipg, dryice_ipg, esdhc1_ipg, esdhc2_ipg, fec_ipg, iim_ipg, - kpp_ipg, lcdc_ipg, pwm1_ipg, pwm2_ipg, pwm3_ipg, pwm4_ipg, sdma_ipg, - ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg, - uart4_ipg, uart5_ipg, wdt_ipg, clk_max + csi_ipg_per, epit_ipg_per, esai_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, + gpt_ipg_per, i2c_ipg_per, lcdc_ipg_per, nfc_ipg_per, owire_ipg_per, + pwm_ipg_per, sim1_ipg_per, sim2_ipg_per, ssi1_ipg_per, ssi2_ipg_per, + uart_ipg_per, ata_ahb, reserved1, csi_ahb, emi_ahb, esai_ahb, esdhc1_ahb, + esdhc2_ahb, fec_ahb, lcdc_ahb, rtic_ahb, sdma_ahb, slcdc_ahb, usbotg_ahb, + reserved2, reserved3, reserved4, reserved5, can1_ipg, can2_ipg, csi_ipg, + cspi1_ipg, cspi2_ipg, cspi3_ipg, dryice_ipg, ect_ipg, epit1_ipg, epit2_ipg, + reserved6, esdhc1_ipg, esdhc2_ipg, fec_ipg, reserved7, reserved8, reserved9, + gpt1_ipg, gpt2_ipg, gpt3_ipg, gpt4_ipg, reserved10, reserved11, reserved12, + iim_ipg, reserved13, reserved14, kpp_ipg, lcdc_ipg, reserved15, pwm1_ipg, + pwm2_ipg, pwm3_ipg, pwm4_ipg, rngb_ipg, reserved16, scc_ipg, sdma_ipg, + sim1_ipg, sim2_ipg, slcdc_ipg, spba_ipg, ssi1_ipg, ssi2_ipg, tsc_ipg, + uart1_ipg, uart2_ipg, uart3_ipg, uart4_ipg, uart5_ipg, reserved17, + wdt_ipg, clk_max }; static struct clk *clk[clk_max]; -int __init mx25_clocks_init(void) +static int __init __mx25_clocks_init(unsigned long osc_rate) { int i; clk[dummy] = imx_clk_fixed("dummy", 0); - clk[osc] = imx_clk_fixed("osc", 24000000); + clk[osc] = imx_clk_fixed("osc", osc_rate); clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL)); clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL)); clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4); @@ -123,22 +134,36 @@ int __init mx25_clocks_init(void) clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6); clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6); clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0); + clk[epit_ipg_per] = imx_clk_gate("epit_ipg_per", "per1", ccm(CCM_CGCR0), 1); + clk[esai_ipg_per] = imx_clk_gate("esai_ipg_per", "per2", ccm(CCM_CGCR0), 2); clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3); clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4); clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5); clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6); clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7); clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8); + clk[owire_ipg_per] = imx_clk_gate("owire_ipg_per", "per9", ccm(CCM_CGCR0), 9); + clk[pwm_ipg_per] = imx_clk_gate("pwm_ipg_per", "per10", ccm(CCM_CGCR0), 10); + clk[sim1_ipg_per] = imx_clk_gate("sim1_ipg_per", "per11", ccm(CCM_CGCR0), 11); + clk[sim2_ipg_per] = imx_clk_gate("sim2_ipg_per", "per12", ccm(CCM_CGCR0), 12); clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13); clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14); clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15); + clk[ata_ahb] = imx_clk_gate("ata_ahb", "ahb", ccm(CCM_CGCR0), 16); + /* CCM_CGCR0(17): reserved */ clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18); + clk[emi_ahb] = imx_clk_gate("emi_ahb", "ahb", ccm(CCM_CGCR0), 19); + clk[esai_ahb] = imx_clk_gate("esai_ahb", "ahb", ccm(CCM_CGCR0), 20); clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21); clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22); clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23); clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24); + clk[rtic_ahb] = imx_clk_gate("rtic_ahb", "ahb", ccm(CCM_CGCR0), 25); clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26); + clk[slcdc_ahb] = imx_clk_gate("slcdc_ahb", "ahb", ccm(CCM_CGCR0), 27); clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28); + /* CCM_CGCR0(29-31): reserved */ + /* CCM_CGCR1(0): reserved in datasheet, used as audmux in FSL kernel */ clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2); clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3); clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4); @@ -146,17 +171,41 @@ int __init mx25_clocks_init(void) clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6); clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7); clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8); + clk[ect_ipg] = imx_clk_gate("ect_ipg", "ipg", ccm(CCM_CGCR1), 9); + clk[epit1_ipg] = imx_clk_gate("epit1_ipg", "ipg", ccm(CCM_CGCR1), 10); + clk[epit2_ipg] = imx_clk_gate("epit2_ipg", "ipg", ccm(CCM_CGCR1), 11); + /* CCM_CGCR1(12): reserved in datasheet, used as esai in FSL kernel */ clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13); clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14); clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15); + /* CCM_CGCR1(16): reserved in datasheet, used as gpio1 in FSL kernel */ + /* CCM_CGCR1(17): reserved in datasheet, used as gpio2 in FSL kernel */ + /* CCM_CGCR1(18): reserved in datasheet, used as gpio3 in FSL kernel */ + clk[gpt1_ipg] = imx_clk_gate("gpt1_ipg", "ipg", ccm(CCM_CGCR1), 19); + clk[gpt2_ipg] = imx_clk_gate("gpt2_ipg", "ipg", ccm(CCM_CGCR1), 20); + clk[gpt3_ipg] = imx_clk_gate("gpt3_ipg", "ipg", ccm(CCM_CGCR1), 21); + clk[gpt4_ipg] = imx_clk_gate("gpt4_ipg", "ipg", ccm(CCM_CGCR1), 22); + /* CCM_CGCR1(23): reserved in datasheet, used as i2c1 in FSL kernel */ + /* CCM_CGCR1(24): reserved in datasheet, used as i2c2 in FSL kernel */ + /* CCM_CGCR1(25): reserved in datasheet, used as i2c3 in FSL kernel */ clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26); + /* CCM_CGCR1(27): reserved in datasheet, used as iomuxc in FSL kernel */ + /* CCM_CGCR1(28): reserved in datasheet, used as kpp in FSL kernel */ clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28); clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29); + /* CCM_CGCR1(30): reserved in datasheet, used as owire in FSL kernel */ clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31); clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0); clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1); clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2); + clk[rngb_ipg] = imx_clk_gate("rngb_ipg", "ipg", ccm(CCM_CGCR2), 3); + /* CCM_CGCR2(4): reserved in datasheet, used as rtic in FSL kernel */ + clk[scc_ipg] = imx_clk_gate("scc_ipg", "ipg", ccm(CCM_CGCR2), 5); clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6); + clk[sim1_ipg] = imx_clk_gate("sim1_ipg", "ipg", ccm(CCM_CGCR2), 7); + clk[sim2_ipg] = imx_clk_gate("sim2_ipg", "ipg", ccm(CCM_CGCR2), 8); + clk[slcdc_ipg] = imx_clk_gate("slcdc_ipg", "ipg", ccm(CCM_CGCR2), 9); + clk[spba_ipg] = imx_clk_gate("spba_ipg", "ipg", ccm(CCM_CGCR2), 10); clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11); clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12); clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13); @@ -165,6 +214,7 @@ int __init mx25_clocks_init(void) clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16); clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17); clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18); + /* CCM_CGCR2(19): reserved in datasheet, but used as wdt in FSL kernel */ clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19); for (i = 0; i < ARRAY_SIZE(clk); i++) @@ -172,6 +222,18 @@ int __init mx25_clocks_init(void) pr_err("i.MX25 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + clk_prepare_enable(clk[emi_ahb]); + + clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); + clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); + + return 0; +} + +int __init mx25_clocks_init(void) +{ + __mx25_clocks_init(24000000); + /* i.mx25 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0"); clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0"); @@ -183,8 +245,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3"); clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4"); clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4"); - clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0"); - clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0"); clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0"); clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0"); @@ -242,5 +302,40 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[iim_ipg], "iim", NULL); mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); + + return 0; +} + +int __init mx25_clocks_init_dt(void) +{ + struct device_node *np; + void __iomem *base; + int irq; + unsigned long osc_rate = 24000000; + + /* retrieve the freqency of fixed clocks from device tree */ + for_each_compatible_node(np, NULL, "fixed-clock") { + u32 rate; + if (of_property_read_u32(np, "clock-frequency", &rate)) + continue; + + if (of_device_is_compatible(np, "fsl,imx-osc")) + osc_rate = rate; + } + + np = of_find_compatible_node(NULL, NULL, "fsl,imx25-ccm"); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + + __mx25_clocks_init(osc_rate); + + np = of_find_compatible_node(NULL, NULL, "fsl,imx25-gpt"); + base = of_iomap(np, 0); + WARN_ON(!base); + irq = irq_of_parse_and_map(np, 0); + + mxc_timer_init(base, irq); + return 0; } diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index e5a82bb95b52..5f9f5919dd74 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -406,6 +406,7 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); + clk_register_clkdev(clk[arm], NULL, "cpu0"); /* * The gpmi needs 100MHz frequency in the EDO/Sync mode, diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index ef8db6b34841..7191ab4434e5 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -66,6 +66,7 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); +extern int mx25_clocks_init_dt(void); extern int mx27_clocks_init_dt(void); extern int mx31_clocks_init_dt(void); extern int mx51_clocks_init_dt(void); diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c new file mode 100644 index 000000000000..e17dfbc42192 --- /dev/null +++ b/arch/arm/mach-imx/imx25-dt.c @@ -0,0 +1,48 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/irq.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include "common.h" +#include "mx25.h" + +static void __init imx25_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); +} + +static void __init imx25_timer_init(void) +{ + mx25_clocks_init_dt(); +} + +static struct sys_timer imx25_timer = { + .init = imx25_timer_init, +}; + +static const char * const imx25_dt_board_compat[] __initconst = { + "fsl,imx25", + NULL +}; + +DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)") + .map_io = mx25_map_io, + .init_early = imx25_init_early, + .init_irq = mx25_init_irq, + .handle_irq = imx25_handle_irq, + .timer = &imx25_timer, + .init_machine = imx25_dt_init, + .dt_compat = imx25_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c index 5f1510363ee7..2fdc9bf2fb5e 100644 --- a/arch/arm/mach-imx/lluart.c +++ b/arch/arm/mach-imx/lluart.c @@ -17,17 +17,25 @@ #include "hardware.h" +#define IMX6Q_UART1_BASE_ADDR 0x02020000 +#define IMX6Q_UART2_BASE_ADDR 0x021e8000 +#define IMX6Q_UART3_BASE_ADDR 0x021ec000 +#define IMX6Q_UART4_BASE_ADDR 0x021f0000 +#define IMX6Q_UART5_BASE_ADDR 0x021f4000 + +/* + * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion + * of IMX6Q_UART##n##_BASE_ADDR. + */ +#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR +#define IMX6Q_UART_BASE(n) IMX6Q_UART_BASE_ADDR(n) +#define IMX6Q_DEBUG_UART_BASE IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT) + static struct map_desc imx_lluart_desc = { -#ifdef CONFIG_DEBUG_IMX6Q_UART2 - .virtual = MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR), - .pfn = __phys_to_pfn(MX6Q_UART2_BASE_ADDR), - .length = MX6Q_UART2_SIZE, - .type = MT_DEVICE, -#endif -#ifdef CONFIG_DEBUG_IMX6Q_UART4 - .virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR), - .pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR), - .length = MX6Q_UART4_SIZE, +#ifdef CONFIG_DEBUG_IMX6Q_UART + .virtual = IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE), + .pfn = __phys_to_pfn(IMX6Q_DEBUG_UART_BASE), + .length = 0x4000, .type = MT_DEVICE, #endif }; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 978b6dd00de4..9511142d436c 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -38,6 +38,40 @@ #include "cpuidle.h" #include "hardware.h" +#define IMX6Q_ANALOG_DIGPROG 0x260 + +static int imx6q_revision(void) +{ + struct device_node *np; + void __iomem *base; + static u32 rev; + + if (!rev) { + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); + if (!np) + return IMX_CHIP_REVISION_UNKNOWN; + base = of_iomap(np, 0); + if (!base) { + of_node_put(np); + return IMX_CHIP_REVISION_UNKNOWN; + } + rev = readl_relaxed(base + IMX6Q_ANALOG_DIGPROG); + iounmap(base); + of_node_put(np); + } + + switch (rev & 0xff) { + case 0: + return IMX_CHIP_REVISION_1_0; + case 1: + return IMX_CHIP_REVISION_1_1; + case 2: + return IMX_CHIP_REVISION_1_2; + default: + return IMX_CHIP_REVISION_UNKNOWN; + } +} + void imx6q_restart(char mode, const char *cmd) { struct device_node *np; @@ -192,6 +226,7 @@ static void __init imx6q_timer_init(void) { mx6q_clocks_init(); twd_local_timer_of_register(); + imx_print_silicon_rev("i.MX6Q", imx6q_revision()); } static struct sys_timer imx6q_timer = { diff --git a/arch/arm/mach-imx/mx6q.h b/arch/arm/mach-imx/mx6q.h index f7e7dbac8f4b..19d3f54db5af 100644 --- a/arch/arm/mach-imx/mx6q.h +++ b/arch/arm/mach-imx/mx6q.h @@ -27,9 +27,5 @@ #define MX6Q_CCM_SIZE 0x4000 #define MX6Q_ANATOP_BASE_ADDR 0x020c8000 #define MX6Q_ANATOP_SIZE 0x1000 -#define MX6Q_UART2_BASE_ADDR 0x021e8000 -#define MX6Q_UART2_SIZE 0x4000 -#define MX6Q_UART4_BASE_ADDR 0x021f0000 -#define MX6Q_UART4_SIZE 0x4000 #endif /* __MACH_MX6Q_H__ */ diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig index 50bca5032b7e..503d7dd944ff 100644 --- a/arch/arm/mach-kirkwood/Kconfig +++ b/arch/arm/mach-kirkwood/Kconfig @@ -46,6 +46,11 @@ config MACH_GURUPLUG config ARCH_KIRKWOOD_DT bool "Marvell Kirkwood Flattened Device Tree" + select POWER_SUPPLY + select POWER_RESET + select POWER_RESET_GPIO + select REGULATOR + select REGULATOR_FIXED_VOLTAGE select USE_OF help Say 'Y' here if you want your kernel to support the @@ -130,6 +135,63 @@ config MACH_KM_KIRKWOOD_DT Say 'Y' here if you want your kernel to support the Keymile Kirkwood Reference Desgin, using Flattened Device Tree. +config MACH_INETSPACE_V2_DT + bool "LaCie Internet Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Internet Space v2 NAS, using Flattened Device Tree. + +config MACH_MPLCEC4_DT + bool "MPL CEC4 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + MPL CEC4 (Flattened Device Tree). + +config MACH_NETSPACE_V2_DT + bool "LaCie Network Space v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MAX_V2_DT + bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Max v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_LITE_V2_DT + bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Lite v2 NAS, using Flattened Device Tree. + +config MACH_NETSPACE_MINI_V2_DT + bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the LaCie + Network Space Mini v2 NAS (aka SafeBox), using Flattened + Device Tree. + +config MACH_OPENBLOCKS_A6_DT + bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + Plat'Home OpenBlocks A6 (Flattened Device Tree). + +config MACH_TOPKICK_DT + bool "USI Topkick (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + help + Say 'Y' here if you want your kernel to support the + USI Topkick, using Flattened Device Tree + config MACH_TS219 bool "QNAP TS-110, TS-119, TS-119P+, TS-210, TS-219, TS-219P and TS-219P+ Turbo NAS" help @@ -216,6 +278,14 @@ config MACH_T5325 Say 'Y' here if you want your kernel to support the HP t5325 Thin Client. +config MACH_NSA310_DT + bool "ZyXEL NSA-310 (Flattened Device Tree)" + select ARCH_KIRKWOOD_DT + select ARM_ATAG_DTB_COMPAT + help + Say 'Y' here if you want your kernel to support the + ZyXEL NSA-310 board (Flattened Device Tree). + endmenu endif diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index 294779f892d9..8d2e5a96247c 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -31,3 +31,12 @@ obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o +obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_MPLCEC4_DT) += board-mplcec4.o +obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT) += board-ns2.o +obj-$(CONFIG_MACH_NSA310_DT) += board-nsa310.o +obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT) += board-openblocks_a6.o +obj-$(CONFIG_MACH_TOPKICK_DT) += board-usi_topkick.o diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c index 43d16d6714b8..a1aa87f09180 100644 --- a/arch/arm/mach-kirkwood/board-dnskw.c +++ b/arch/arm/mach-kirkwood/board-dnskw.c @@ -17,51 +17,11 @@ #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data dnskw_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int dnskw_mpp_config[] __initdata = { - MPP13_UART1_TXD, /* Custom ... */ - MPP14_UART1_RXD, /* ... Controller (DNS-320 only) */ - MPP20_SATA1_ACTn, /* LED: White Right HDD */ - MPP21_SATA0_ACTn, /* LED: White Left HDD */ - MPP24_GPIO, - MPP25_GPIO, - MPP26_GPIO, /* LED: Power */ - MPP27_GPIO, /* LED: Red Right HDD */ - MPP28_GPIO, /* LED: Red Left HDD */ - MPP29_GPIO, /* LED: Red USB (DNS-325 only) */ - MPP30_GPIO, - MPP31_GPIO, - MPP32_GPIO, - MPP33_GPO, - MPP34_GPIO, /* Button: Front power */ - MPP35_GPIO, /* LED: Red USB (DNS-320 only) */ - MPP36_GPIO, /* Power: Turn off board */ - MPP37_GPIO, /* Power: Turn back on after power failure */ - MPP38_GPIO, - MPP39_GPIO, /* Power: SATA0 */ - MPP40_GPIO, /* Power: SATA1 */ - MPP41_GPIO, /* SATA0 present */ - MPP42_GPIO, /* SATA1 present */ - MPP43_GPIO, /* LED: White USB */ - MPP44_GPIO, /* Fan: Tachometer Pin */ - MPP45_GPIO, /* Fan: high speed */ - MPP46_GPIO, /* Fan: low speed */ - MPP47_GPIO, /* Button: Back unmount */ - MPP48_GPIO, /* Button: Back reset */ - MPP49_GPIO, /* Temp Alarm (DNS-325) Pin of U5 (DNS-320) */ - 0 -}; - -static void dnskw_power_off(void) -{ - gpio_set_value(36, 1); -} - /* Register any GPIO for output and set the value */ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) { @@ -76,22 +36,8 @@ static void __init dnskw_gpio_register(unsigned gpio, char *name, int def) void __init dnskw_init(void) { - kirkwood_mpp_conf(dnskw_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&dnskw_ge00_data); - /* Register power-off GPIO. */ - if (gpio_request(36, "dnskw:power:off") == 0 - && gpio_direction_output(36, 0) == 0) - pm_power_off = dnskw_power_off; - else - pr_err("dnskw: failed to configure power-off GPIO\n"); - - /* Ensure power is supplied to both HDDs */ - dnskw_gpio_register(39, "dnskw:power:sata0", 1); - dnskw_gpio_register(40, "dnskw:power:sata1", 1); - /* Set NAS to turn back on after a power failure */ dnskw_gpio_register(37, "dnskw:power:recover", 1); } diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c index 6912882b0aa9..d7196db33984 100644 --- a/arch/arm/mach-kirkwood/board-dockstar.c +++ b/arch/arm/mach-kirkwood/board-dockstar.c @@ -17,32 +17,16 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data dockstar_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int dockstar_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP46_GPIO, /* LED green */ - MPP47_GPIO, /* LED orange */ - 0 -}; - void __init dockstar_dt_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(dockstar_mpp_config); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't setup GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - kirkwood_ge00_init(&dockstar_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c index 8a8ebe09e512..08248e24ffcd 100644 --- a/arch/arm/mach-kirkwood/board-dreamplug.c +++ b/arch/arm/mach-kirkwood/board-dreamplug.c @@ -17,7 +17,6 @@ #include <linux/gpio.h> #include <linux/platform_data/mmc-mvsdio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data dreamplug_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), @@ -31,25 +30,11 @@ static struct mvsdio_platform_data dreamplug_mvsdio_data = { /* unfortunately the CD signal has not been connected */ }; -static unsigned int dreamplug_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP47_GPIO, /* Bluetooth LED */ - MPP48_GPIO, /* Wifi LED */ - MPP49_GPIO, /* Wifi AP LED */ - 0 -}; - void __init dreamplug_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(dreamplug_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&dreamplug_ge00_data); kirkwood_ge01_init(&dreamplug_ge01_data); kirkwood_sdio_init(&dreamplug_mvsdio_data); diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c index e75fbdb533de..375f7d88551c 100644 --- a/arch/arm/mach-kirkwood/board-dt.c +++ b/arch/arm/mach-kirkwood/board-dt.c @@ -30,6 +30,8 @@ static struct of_dev_auxdata kirkwood_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011100, "mv64xxx_i2c.1", + NULL), OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), OF_DEV_AUXDATA("marvell,orion-nand", 0xf4000000, "orion_nand", NULL), @@ -94,6 +96,25 @@ static void __init kirkwood_dt_init(void) if (of_machine_is_compatible("keymile,km_kirkwood")) km_kirkwood_init(); + if (of_machine_is_compatible("lacie,inetspace_v2") || + of_machine_is_compatible("lacie,netspace_v2") || + of_machine_is_compatible("lacie,netspace_max_v2") || + of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_init(); + + if (of_machine_is_compatible("mpl,cec4")) + mplcec4_init(); + + if (of_machine_is_compatible("plathome,openblocks-a6")) + openblocks_a6_init(); + + if (of_machine_is_compatible("usi,topkick")) + usi_topkick_init(); + + if (of_machine_is_compatible("zyxel,nsa310")) + nsa310_init(); + of_platform_populate(NULL, kirkwood_dt_match_table, kirkwood_auxdata_lookup, NULL); } @@ -110,6 +131,15 @@ static const char * const kirkwood_dt_board_compat[] = { "buffalo,lsxl", "iom,ix2-200", "keymile,km_kirkwood", + "lacie,inetspace_v2", + "lacie,netspace_max_v2", + "lacie,netspace_v2", + "lacie,netspace_lite_v2", + "lacie,netspace_mini_v2", + "mpl,cec4", + "plathome,openblocks-a6", + "usi,topkick", + "zyxel,nsa310", NULL }; diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c index 5dcd0d62aa42..9db979aec82e 100644 --- a/arch/arm/mach-kirkwood/board-goflexnet.c +++ b/arch/arm/mach-kirkwood/board-goflexnet.c @@ -19,40 +19,16 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data goflexnet_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int goflexnet_mpp_config[] __initdata = { - MPP29_GPIO, /* USB Power Enable */ - MPP47_GPIO, /* LED Orange */ - MPP46_GPIO, /* LED Green */ - MPP45_GPIO, /* LED Left Capacity 3 */ - MPP44_GPIO, /* LED Left Capacity 2 */ - MPP43_GPIO, /* LED Left Capacity 1 */ - MPP42_GPIO, /* LED Left Capacity 0 */ - MPP41_GPIO, /* LED Right Capacity 3 */ - MPP40_GPIO, /* LED Right Capacity 2 */ - MPP39_GPIO, /* LED Right Capacity 1 */ - MPP38_GPIO, /* LED Right Capacity 0 */ - 0 -}; - void __init goflexnet_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(goflexnet_mpp_config); - - if (gpio_request(29, "USB Power Enable") != 0 || - gpio_direction_output(29, 1) != 0) - pr_err("can't setup GPIO 29 (USB Power Enable)\n"); - kirkwood_ehci_init(); - kirkwood_ge00_init(&goflexnet_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index 6d3a56421142..9f6f496380d8 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -14,52 +14,17 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> #include <linux/input.h> #include "common.h" -#include "mpp.h" - -#define IB62X0_GPIO_POWER_OFF 24 static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int ib62x0_mpp_config[] __initdata = { - MPP0_NF_IO2, - MPP1_NF_IO3, - MPP2_NF_IO4, - MPP3_NF_IO5, - MPP4_NF_IO6, - MPP5_NF_IO7, - MPP18_NF_IO0, - MPP19_NF_IO1, - MPP22_GPIO, /* OS LED red */ - MPP24_GPIO, /* Power off device */ - MPP25_GPIO, /* OS LED green */ - MPP27_GPIO, /* USB transfer LED */ - MPP28_GPIO, /* Reset button */ - MPP29_GPIO, /* USB Copy button */ - 0 -}; - -static void ib62x0_power_off(void) -{ - gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); -} - void __init ib62x0_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(ib62x0_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&ib62x0_ge00_data); - if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && - gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) - pm_power_off = ib62x0_power_off; - else - pr_err("board-ib62x0: failed to configure power-off GPIO\n"); } diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index 24f5aa7f698b..c8ebde4919e2 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -13,31 +13,13 @@ #include <linux/of.h> #include <linux/mv643xx_eth.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data iconnect_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(11), }; -static unsigned int iconnect_mpp_config[] __initdata = { - MPP12_GPIO, - MPP35_GPIO, - MPP41_GPIO, - MPP42_GPIO, - MPP43_GPIO, - MPP44_GPIO, - MPP45_GPIO, - MPP46_GPIO, - MPP47_GPIO, - MPP48_GPIO, - 0 -}; - void __init iconnect_init(void) { - kirkwood_mpp_conf(iconnect_mpp_config); - - kirkwood_ehci_init(); kirkwood_ge00_init(&iconnect_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c index e4ed62c28f54..f655b2637b0e 100644 --- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c +++ b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c @@ -13,7 +13,6 @@ #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { .phy_addr = MV643XX_ETH_PHY_NONE, @@ -21,35 +20,10 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = { .duplex = DUPLEX_FULL, }; -static unsigned int iomega_ix2_200_mpp_config[] __initdata = { - MPP12_GPIO, /* Reset Button */ - MPP14_GPIO, /* Power Button */ - MPP15_GPIO, /* Backup LED (blue) */ - MPP16_GPIO, /* Power LED (white) */ - MPP35_GPIO, /* OTB Button */ - MPP36_GPIO, /* Rebuild LED (white) */ - MPP37_GPIO, /* Health LED (red) */ - MPP38_GPIO, /* SATA LED brightness control 1 */ - MPP39_GPIO, /* SATA LED brightness control 2 */ - MPP40_GPIO, /* Backup LED brightness control 1 */ - MPP41_GPIO, /* Backup LED brightness control 2 */ - MPP42_GPIO, /* Power LED brightness control 1 */ - MPP43_GPIO, /* Power LED brightness control 2 */ - MPP44_GPIO, /* Health LED brightness control 1 */ - MPP45_GPIO, /* Health LED brightness control 2 */ - MPP46_GPIO, /* Rebuild LED brightness control 1 */ - MPP47_GPIO, /* Rebuild LED brightness control 2 */ - 0 -}; - void __init iomega_ix2_200_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(iomega_ix2_200_mpp_config); - - kirkwood_ehci_init(); - kirkwood_ge01_init(&iomega_ix2_200_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c index f7d32834b757..44e4605ba0bf 100644 --- a/arch/arm/mach-kirkwood/board-km_kirkwood.c +++ b/arch/arm/mach-kirkwood/board-km_kirkwood.c @@ -18,27 +18,15 @@ #include <linux/clk.h> #include <linux/clk-private.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), }; -static unsigned int km_kirkwood_mpp_config[] __initdata = { - MPP8_GPIO, /* I2C SDA */ - MPP9_GPIO, /* I2C SCL */ - 0 -}; - void __init km_kirkwood_init(void) { struct clk *sata_clk; /* - * Basic setup. Needs to be called early. - */ - kirkwood_mpp_conf(km_kirkwood_mpp_config); - - /* * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing * SATA bits (14-15) of the Clock Gating Control Register. Since these * devices are also not present in this variant, their clocks get @@ -52,6 +40,5 @@ void __init km_kirkwood_init(void) if (!IS_ERR(sata_clk)) sata_clk->flags |= CLK_IGNORE_UNUSED; - kirkwood_ehci_init(); kirkwood_ge00_init(&km_kirkwood_ge00_data); } diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c index 64e5cc6b6d5f..4ec8b7ae784a 100644 --- a/arch/arm/mach-kirkwood/board-lsxl.c +++ b/arch/arm/mach-kirkwood/board-lsxl.c @@ -15,10 +15,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/mv643xx_eth.h> -#include <linux/gpio.h> -#include <linux/gpio-fan.h> #include "common.h" -#include "mpp.h" static struct mv643xx_eth_platform_data lsxl_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(0), @@ -28,68 +25,6 @@ static struct mv643xx_eth_platform_data lsxl_ge01_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int lsxl_mpp_config[] __initdata = { - MPP10_GPO, /* HDD Power Enable */ - MPP11_GPIO, /* USB Vbus Enable */ - MPP18_GPO, /* FAN High Enable# */ - MPP19_GPO, /* FAN Low Enable# */ - MPP36_GPIO, /* Function Blue LED */ - MPP37_GPIO, /* Alarm LED */ - MPP38_GPIO, /* Info LED */ - MPP39_GPIO, /* Power LED */ - MPP40_GPIO, /* Fan Lock */ - MPP41_GPIO, /* Function Button */ - MPP42_GPIO, /* Power Switch */ - MPP43_GPIO, /* Power Auto Switch */ - MPP48_GPIO, /* Function Red LED */ - 0 -}; - -#define LSXL_GPIO_FAN_HIGH 18 -#define LSXL_GPIO_FAN_LOW 19 -#define LSXL_GPIO_FAN_LOCK 40 - -static struct gpio_fan_alarm lsxl_alarm = { - .gpio = LSXL_GPIO_FAN_LOCK, -}; - -static struct gpio_fan_speed lsxl_speeds[] = { - { - .rpm = 0, - .ctrl_val = 3, - }, { - .rpm = 1500, - .ctrl_val = 1, - }, { - .rpm = 3250, - .ctrl_val = 2, - }, { - .rpm = 5000, - .ctrl_val = 0, - } -}; - -static int lsxl_gpio_list[] = { - LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW, -}; - -static struct gpio_fan_platform_data lsxl_fan_data = { - .num_ctrl = ARRAY_SIZE(lsxl_gpio_list), - .ctrl = lsxl_gpio_list, - .alarm = &lsxl_alarm, - .num_speed = ARRAY_SIZE(lsxl_speeds), - .speed = lsxl_speeds, -}; - -static struct platform_device lsxl_fan_device = { - .name = "gpio-fan", - .id = -1, - .num_resources = 0, - .dev = { - .platform_data = &lsxl_fan_data, - }, -}; - /* * On the LS-XHL/LS-CHLv2, the shutdown process is following: * - Userland monitors key events until the power switch goes to off position @@ -103,24 +38,14 @@ static void lsxl_power_off(void) kirkwood_restart('h', NULL); } -#define LSXL_GPIO_HDD_POWER 10 -#define LSXL_GPIO_USB_POWER 11 - void __init lsxl_init(void) { /* * Basic setup. Needs to be called early. */ - kirkwood_mpp_conf(lsxl_mpp_config); - - /* usb and sata power on */ - gpio_set_value(LSXL_GPIO_USB_POWER, 1); - gpio_set_value(LSXL_GPIO_HDD_POWER, 1); - kirkwood_ehci_init(); kirkwood_ge00_init(&lsxl_ge00_data); kirkwood_ge01_init(&lsxl_ge01_data); - platform_device_register(&lsxl_fan_device); /* register power-off method */ pm_power_off = lsxl_power_off; diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c new file mode 100644 index 000000000000..56bfe5a1605a --- /dev/null +++ b/arch/arm/mach-kirkwood/board-mplcec4.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 MPL AG, Switzerland + * Stefan Peter <s.peter@mpl.ch> + * + * arch/arm/mach-kirkwood/board-mplcec4.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data mplcec4_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(1), +}; + +static struct mv643xx_eth_platform_data mplcec4_ge01_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(2), +}; + +static struct mvsdio_platform_data mplcec4_mvsdio_data = { + .gpio_card_detect = 47, /* MPP47 used as SD card detect */ +}; + + +void __init mplcec4_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_ge00_init(&mplcec4_ge00_data); + kirkwood_ge01_init(&mplcec4_ge01_data); + kirkwood_sdio_init(&mplcec4_mvsdio_data); + kirkwood_pcie_init(KW_PCIE0); +} + + + diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c new file mode 100644 index 000000000000..8821720ab5a4 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-ns2.c @@ -0,0 +1,86 @@ +/* + * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org> + * + * arch/arm/mach-kirkwood/board-ns2.c + * + * LaCie Network Space v2 board (and parents) initialization for drivers + * not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data ns2_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(8), +}; + +static unsigned int ns2_mpp_config[] __initdata = { + MPP0_SPI_SCn, + MPP1_SPI_MOSI, + MPP2_SPI_SCK, + MPP3_SPI_MISO, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW0_SDA, + MPP9_TW0_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP12_GPO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_SATA1_ACTn, + MPP21_SATA0_ACTn, + MPP22_GPIO, /* Fan speed (bit 0) */ + MPP23_GPIO, /* Fan power */ + MPP24_GPIO, /* USB mode select */ + MPP25_GPIO, /* Fan rotation fail */ + MPP26_GPIO, /* USB device vbus */ + MPP28_GPIO, /* USB enable host vbus */ + MPP29_GPIO, /* Blue led (slow register) */ + MPP30_GPIO, /* Blue led (command register) */ + MPP31_GPIO, /* Board power off */ + MPP32_GPIO, /* Power button (0 = Released, 1 = Pushed) */ + MPP33_GPO, /* Fan speed (bit 2) */ + 0 +}; + +#define NS2_GPIO_POWER_OFF 31 + +static void ns2_power_off(void) +{ + gpio_set_value(NS2_GPIO_POWER_OFF, 1); +} + +void __init ns2_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(ns2_mpp_config); + + if (of_machine_is_compatible("lacie,netspace_lite_v2") || + of_machine_is_compatible("lacie,netspace_mini_v2")) + ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); + kirkwood_ge00_init(&ns2_ge00_data); + + if (gpio_request(NS2_GPIO_POWER_OFF, "power-off") == 0 && + gpio_direction_output(NS2_GPIO_POWER_OFF, 0) == 0) + pm_power_off = ns2_power_off; + else + pr_err("ns2: failed to configure power-off GPIO\n"); +} diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c new file mode 100644 index 000000000000..f58d2e1a4042 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-nsa310.c @@ -0,0 +1,101 @@ +/* + * arch/arm/mach-kirkwood/nsa-310-setup.c + * + * ZyXEL NSA-310 Setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <mach/kirkwood.h> +#include "common.h" +#include "mpp.h" + +#define NSA310_GPIO_USB_POWER_OFF 21 +#define NSA310_GPIO_POWER_OFF 48 + +static unsigned int nsa310_mpp_config[] __initdata = { + MPP12_GPIO, /* led esata green */ + MPP13_GPIO, /* led esata red */ + MPP15_GPIO, /* led usb green */ + MPP16_GPIO, /* led usb red */ + MPP21_GPIO, /* control usb power off */ + MPP28_GPIO, /* led sys green */ + MPP29_GPIO, /* led sys red */ + MPP36_GPIO, /* key reset */ + MPP37_GPIO, /* key copy */ + MPP39_GPIO, /* led copy green */ + MPP40_GPIO, /* led copy red */ + MPP41_GPIO, /* led hdd green */ + MPP42_GPIO, /* led hdd red */ + MPP44_GPIO, /* ?? */ + MPP46_GPIO, /* key power */ + MPP48_GPIO, /* control power off */ + 0 +}; + +static struct i2c_board_info __initdata nsa310_i2c_info[] = { + { I2C_BOARD_INFO("adt7476", 0x2e) }, +}; + +static void nsa310_power_off(void) +{ + gpio_set_value(NSA310_GPIO_POWER_OFF, 1); +} + +static int __init nsa310_gpio_request(unsigned int gpio, unsigned long flags, + const char *label) +{ + int err; + + err = gpio_request_one(gpio, flags, label); + if (err) + pr_err("NSA-310: can't setup GPIO%u (%s), err=%d\n", + gpio, label, err); + + return err; +} + +static void __init nsa310_gpio_init(void) +{ + int err; + + err = nsa310_gpio_request(NSA310_GPIO_POWER_OFF, GPIOF_OUT_INIT_LOW, + "Power Off"); + if (!err) + pm_power_off = nsa310_power_off; + + nsa310_gpio_request(NSA310_GPIO_USB_POWER_OFF, GPIOF_OUT_INIT_LOW, + "USB Power Off"); +} + +void __init nsa310_init(void) +{ + u32 dev, rev; + + kirkwood_mpp_conf(nsa310_mpp_config); + + nsa310_gpio_init(); + + kirkwood_pcie_id(&dev, &rev); + + i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info)); +} + +static int __init nsa310_pci_init(void) +{ + if (of_machine_is_compatible("zyxel,nsa310")) + kirkwood_pcie_init(KW_PCIE0); + + return 0; +} + +subsys_initcall(nsa310_pci_init); diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c new file mode 100644 index 000000000000..815fc6451d52 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-openblocks_a6.c @@ -0,0 +1,70 @@ +/* + * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> + * + * arch/arm/mach-kirkwood/board-openblocks_a6.c + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/clk.h> +#include <linux/clk-private.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data openblocks_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static unsigned int openblocks_a6_mpp_config[] __initdata = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP8_UART1_RTS, + MPP9_UART1_CTS, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_UART1_TXD, + MPP14_UART1_RXD, + MPP15_UART0_RTS, + MPP16_UART0_CTS, + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GPIO, /* DIP SW0 */ + MPP21_GPIO, /* DIP SW1 */ + MPP22_GPIO, /* DIP SW2 */ + MPP23_GPIO, /* DIP SW3 */ + MPP24_GPIO, /* GPIO 0 */ + MPP25_GPIO, /* GPIO 1 */ + MPP26_GPIO, /* GPIO 2 */ + MPP27_GPIO, /* GPIO 3 */ + MPP28_GPIO, /* GPIO 4 */ + MPP29_GPIO, /* GPIO 5 */ + MPP30_GPIO, /* GPIO 6 */ + MPP31_GPIO, /* GPIO 7 */ + MPP36_TW1_SDA, + MPP37_TW1_SCK, + MPP38_GPIO, /* INIT */ + MPP39_GPIO, /* USB OC */ + MPP41_GPIO, /* LED: Red */ + MPP42_GPIO, /* LED: Green */ + MPP43_GPIO, /* LED: Yellow */ + 0, +}; + +void __init openblocks_a6_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(openblocks_a6_mpp_config); + kirkwood_ge00_init(&openblocks_ge00_data); +} diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c index f3bfedae3a20..acb0187c7ee1 100644 --- a/arch/arm/mach-kirkwood/board-ts219.c +++ b/arch/arm/mach-kirkwood/board-ts219.c @@ -23,47 +23,21 @@ #include <asm/mach/arch.h> #include <mach/kirkwood.h> #include "common.h" -#include "mpp.h" #include "tsx1x-common.h" static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; -static unsigned int qnap_ts219_mpp_config[] __initdata = { - MPP0_SPI_SCn, - MPP1_SPI_MOSI, - MPP2_SPI_SCK, - MPP3_SPI_MISO, - MPP4_SATA1_ACTn, - MPP5_SATA0_ACTn, - MPP8_TW0_SDA, - MPP9_TW0_SCK, - MPP10_UART0_TXD, - MPP11_UART0_RXD, - MPP13_UART1_TXD, /* PIC controller */ - MPP14_UART1_RXD, /* PIC controller */ - MPP15_GPIO, /* USB Copy button (on devices with 88F6281) */ - MPP16_GPIO, /* Reset button (on devices with 88F6281) */ - MPP36_GPIO, /* RAM: 0: 256 MB, 1: 512 MB */ - MPP37_GPIO, /* Reset button (on devices with 88F6282) */ - MPP43_GPIO, /* USB Copy button (on devices with 88F6282) */ - MPP44_GPIO, /* Board ID: 0: TS-11x, 1: TS-21x */ - 0 -}; - void __init qnap_dt_ts219_init(void) { u32 dev, rev; - kirkwood_mpp_conf(qnap_ts219_mpp_config); - kirkwood_pcie_id(&dev, &rev); if (dev == MV88F6282_DEV_ID) qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0); kirkwood_ge00_init(&qnap_ts219_ge00_data); - kirkwood_ehci_init(); pm_power_off = qnap_tsx1x_power_off; } diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c new file mode 100644 index 000000000000..15e69fcde9f4 --- /dev/null +++ b/arch/arm/mach-kirkwood/board-usi_topkick.c @@ -0,0 +1,81 @@ +/* + * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net> + * + * arch/arm/mach-kirkwood/board-usi_topkick.c + * + * USI Topkick Init for drivers not converted to flattened device tree yet. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mv643xx_eth.h> +#include <linux/gpio.h> +#include <linux/platform_data/mmc-mvsdio.h> +#include "common.h" +#include "mpp.h" + +static struct mv643xx_eth_platform_data topkick_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR(0), +}; + +static struct mvsdio_platform_data topkick_mvsdio_data = { + /* unfortunately the CD signal has not been connected */ +}; + +/* + * GPIO LED layout + * + * /-SYS_LED(2) + * | + * | /-DISK_LED + * | | + * | | /-WLAN_LED(2) + * | | | + * [SW] [*] [*] [*] + */ + +/* + * Switch positions + * + * /-SW_LEFT + * | + * | /-SW_IDLE + * | | + * | | /-SW_RIGHT + * | | | + * PS [L] [I] [R] LEDS + */ + +static unsigned int topkick_mpp_config[] __initdata = { + MPP21_GPIO, /* DISK_LED (low active) - yellow */ + MPP36_GPIO, /* SATA0 power enable (high active) */ + MPP37_GPIO, /* SYS_LED2 (low active) - red */ + MPP38_GPIO, /* SYS_LED (low active) - blue */ + MPP39_GPIO, /* WLAN_LED (low active) - green */ + MPP43_GPIO, /* SW_LEFT (low active) */ + MPP44_GPIO, /* SW_RIGHT (low active) */ + MPP45_GPIO, /* SW_IDLE (low active) */ + MPP46_GPIO, /* SW_LEFT (low active) */ + MPP48_GPIO, /* WLAN_LED2 (low active) - yellow */ + 0 +}; + +#define TOPKICK_SATA0_PWR_ENABLE 36 + +void __init usi_topkick_init(void) +{ + /* + * Basic setup. Needs to be called early. + */ + kirkwood_mpp_conf(topkick_mpp_config); + + /* SATA0 power enable */ + gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1); + + kirkwood_ge00_init(&topkick_ge00_data); + kirkwood_sdio_init(&topkick_mvsdio_data); +} diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index f0fc25bd3ffe..5303be62b311 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -266,6 +266,7 @@ void __init kirkwood_clk_init(void) orion_clkdev_add("1", "pcie", pex1); orion_clkdev_add(NULL, "kirkwood-i2s", audio); orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".0", runit); + orion_clkdev_add(NULL, MV64XXX_I2C_CTLR_NAME ".1", runit); /* Marvell says runit is used by SPI, UART, NAND, TWSI, ..., * so should never be gated. diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 6088e9227889..5ffa57f08c80 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -113,6 +113,40 @@ void km_kirkwood_init(void); static inline void km_kirkwood_init(void) {}; #endif +#ifdef CONFIG_MACH_MPLCEC4_DT +void mplcec4_init(void); +#else +static inline void mplcec4_init(void) {}; +#endif + +#if defined(CONFIG_MACH_INETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MAX_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_LITE_V2_DT) || \ + defined(CONFIG_MACH_NETSPACE_MINI_V2_DT) +void ns2_init(void); +#else +static inline void ns2_init(void) {}; +#endif + +#ifdef CONFIG_MACH_NSA310_DT +void nsa310_init(void); +#else +static inline void nsa310_init(void) {}; +#endif + +#ifdef CONFIG_MACH_OPENBLOCKS_A6_DT +void openblocks_a6_init(void); +#else +static inline void openblocks_a6_init(void) {}; +#endif + +#ifdef CONFIG_MACH_TOPKICK_DT +void usi_topkick_init(void); +#else +static inline void usi_topkick_init(void) {}; +#endif + /* early init functions not converted to fdt yet */ char *kirkwood_id(void); void kirkwood_l2_init(void); diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 4748ec551a68..98070370d602 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -100,6 +100,25 @@ static struct fb_videomode apx4devkit_video_modes[] = { }, }; +static struct fb_videomode apf28dev_video_modes[] = { + { + .name = "LW700", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 30303, /* picosecond */ + .left_margin = 96, + .right_margin = 96, /* at least 3 & 1 */ + .upper_margin = 0x14, + .lower_margin = 0x15, + .hsync_len = 64, + .vsync_len = 4, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT | + FB_SYNC_DATA_ENABLE_HIGH_ACT | + FB_SYNC_DOTCLK_FAILING_ACT, + }, +}; + static struct mxsfb_platform_data mxsfb_pdata __initdata; /* @@ -160,6 +179,7 @@ static struct sys_timer imx28_timer = { enum mac_oui { OUI_FSL, OUI_DENX, + OUI_CRYSTALFONTZ, }; static void __init update_fec_mac_prop(enum mac_oui oui) @@ -175,8 +195,12 @@ static void __init update_fec_mac_prop(enum mac_oui oui) np = of_find_compatible_node(from, NULL, "fsl,imx28-fec"); if (!np) return; + from = np; + if (of_get_property(np, "local-mac-address", NULL)) + continue; + newmac = kzalloc(sizeof(*newmac) + 6, GFP_KERNEL); if (!newmac) return; @@ -205,6 +229,11 @@ static void __init update_fec_mac_prop(enum mac_oui oui) macaddr[1] = 0xe5; macaddr[2] = 0x4e; break; + case OUI_CRYSTALFONTZ: + macaddr[0] = 0x58; + macaddr[1] = 0xb9; + macaddr[2] = 0xe1; + break; } val = ocotp[i]; macaddr[3] = (val >> 16) & 0xff; @@ -261,6 +290,11 @@ static void __init m28evk_init(void) mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT; } +static void __init sc_sps1_init(void) +{ + enable_clk_enet_out(); +} + static int apx4devkit_phy_fixup(struct phy_device *phy) { phy->dev_flags |= MICREL_PHY_50MHZ_CLK; @@ -355,6 +389,22 @@ static void __init tx28_post_init(void) pinctrl_put(pctl); } +static void __init cfa10049_init(void) +{ + enable_clk_enet_out(); + update_fec_mac_prop(OUI_CRYSTALFONTZ); +} + +static void __init apf28_init(void) +{ + enable_clk_enet_out(); + + mxsfb_pdata.mode_list = apf28dev_video_modes; + mxsfb_pdata.mode_count = ARRAY_SIZE(apf28dev_video_modes); + mxsfb_pdata.default_bpp = 16; + mxsfb_pdata.ld_intf_width = STMLCDIF_16BIT; +} + static void __init mxs_machine_init(void) { if (of_machine_is_compatible("fsl,imx28-evk")) @@ -365,6 +415,12 @@ static void __init mxs_machine_init(void) m28evk_init(); else if (of_machine_is_compatible("bluegiga,apx4devkit")) apx4devkit_init(); + else if (of_machine_is_compatible("crystalfontz,cfa10049")) + cfa10049_init(); + else if (of_machine_is_compatible("armadeus,imx28-apf28")) + apf28_init(); + else if (of_machine_is_compatible("schulercontrol,imx28-sps1")) + sc_sps1_init(); of_platform_populate(NULL, of_default_bus_match_table, mxs_auxdata_lookup, NULL); diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c index 7c3792613392..856f4c796061 100644 --- a/arch/arm/mach-mxs/timer.c +++ b/arch/arm/mach-mxs/timer.c @@ -29,6 +29,7 @@ #include <linux/of_irq.h> #include <asm/mach/time.h> +#include <asm/sched_clock.h> #include <mach/mxs.h> #include <mach/common.h> @@ -233,15 +234,22 @@ static struct clocksource clocksource_mxs = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static u32 notrace mxs_read_sched_clock_v2(void) +{ + return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); +} + static int __init mxs_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); if (timrot_is_v1()) clocksource_register_hz(&clocksource_mxs, c); - else + else { clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); + setup_sched_clock(mxs_read_sched_clock_v2, 32, c); + } return 0; } diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index aa6e4a19dd90..f0715a369c44 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -112,7 +112,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)") .init_machine = omap_generic_init, .timer = &omap3_secure_timer, .dt_compat = omap3_gp_boards_compat, - .restart = omap_prcm_restart, + .restart = omap3xxx_restart, MACHINE_END #endif diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 0673f0c10432..2cb2f06c20f5 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -2,6 +2,13 @@ if ARCH_ORION5X menu "Orion Implementations" +config ARCH_ORION5X_DT + bool "Marvell Orion5x Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Orion5x using flattened device tree. + config MACH_DB88F5281 bool "Marvell Orion-2 Development Board" select I2C_BOARDINFO @@ -96,12 +103,13 @@ config MACH_MV2120 Say 'Y' here if you want your kernel to support the HP Media Vault mv2120 or mv5100. -config MACH_EDMINI_V2 - bool "LaCie Ethernet Disk mini V2" +config MACH_EDMINI_V2_DT + bool "LaCie Ethernet Disk mini V2 (Flattened Device Tree)" select I2C_BOARDINFO + select ARCH_ORION5X_DT help Say 'Y' here if you want your kernel to support the - LaCie Ethernet Disk mini V2. + LaCie Ethernet Disk mini V2 (Flattened Device Tree). config MACH_D2NET bool "LaCie d2 Network" diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 7f18cdacd487..9e809a7c05c0 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_MACH_TS409) += ts409-setup.o tsx09-common.o obj-$(CONFIG_MACH_WRT350N_V2) += wrt350n-v2-setup.o obj-$(CONFIG_MACH_TS78XX) += ts78xx-setup.o obj-$(CONFIG_MACH_MV2120) += mv2120-setup.o -obj-$(CONFIG_MACH_EDMINI_V2) += edmini_v2-setup.o obj-$(CONFIG_MACH_D2NET) += d2net-setup.o obj-$(CONFIG_MACH_BIGDISK) += d2net-setup.o obj-$(CONFIG_MACH_NET2BIG) += net2big-setup.o @@ -22,3 +21,6 @@ obj-$(CONFIG_MACH_RD88F5181L_GE) += rd88f5181l-ge-setup.o obj-$(CONFIG_MACH_RD88F5181L_FXO) += rd88f5181l-fxo-setup.o obj-$(CONFIG_MACH_RD88F6183AP_GE) += rd88f6183ap-ge-setup.o obj-$(CONFIG_MACH_LINKSTATION_LSCHL) += ls-chl-setup.o + +obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o +obj-$(CONFIG_MACH_EDMINI_V2_DT) += edmini_v2-setup.o diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c new file mode 100644 index 000000000000..32e5c211a89b --- /dev/null +++ b/arch/arm/mach-orion5x/board-dt.c @@ -0,0 +1,79 @@ +/* + * Copyright 2012 (C), Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * arch/arm/mach-orion5x/board-dt.c + * + * Flattened Device Tree board initialization + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <asm/system_misc.h> +#include <asm/mach/arch.h> +#include <mach/orion5x.h> +#include <plat/irq.h> +#include "common.h" + +struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1090000, "mv_crypto", NULL), + {}, +}; + +static void __init orion5x_dt_init(void) +{ + char *dev_name; + u32 dev, rev; + + orion5x_id(&dev, &rev, &dev_name); + printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk); + + /* + * Setup Orion address map + */ + orion5x_setup_cpu_mbus_bridge(); + + /* Setup root of clk tree */ + clk_init(); + + /* + * Don't issue "Wait for Interrupt" instruction if we are + * running on D0 5281 silicon. + */ + if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { + printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); + disable_hlt(); + } + + if (of_machine_is_compatible("lacie,ethernet-disk-mini-v2")) + edmini_v2_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + orion5x_auxdata_lookup, NULL); +} + +static const char *orion5x_dt_compat[] = { + "marvell,orion5x", + NULL, +}; + +DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)") + /* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */ + .map_io = orion5x_map_io, + .init_early = orion5x_init_early, + .init_irq = orion_dt_init_irq, + .timer = &orion5x_timer, + .init_machine = orion5x_dt_init, + .restart = orion5x_restart, + .dt_compat = orion5x_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index b3eb3da01160..550f92320afb 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -65,7 +65,7 @@ void __init orion5x_map_io(void) ****************************************************************************/ static struct clk *tclk; -static void __init clk_init(void) +void __init clk_init(void) { tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, orion5x_tclk); @@ -236,7 +236,7 @@ struct sys_timer orion5x_timer = { /* * Identify device ID and rev from PCIe configuration header space '0'. */ -static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) +void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) { orion5x_pcie_id(dev, rev); diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 31bab92ce038..7db5cdd9c4b7 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -12,6 +12,8 @@ void orion5x_map_io(void); void orion5x_init_early(void); void orion5x_init_irq(void); void orion5x_init(void); +void orion5x_id(u32 *dev, u32 *rev, char **dev_name); +void clk_init(void); extern int orion5x_tclk; extern struct sys_timer orion5x_timer; @@ -54,6 +56,13 @@ int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); +/* board init functions for boards not fully converted to fdt */ +#ifdef CONFIG_MACH_EDMINI_V2_DT +void edmini_v2_init(void); +#else +static inline void edmini_v2_init(void) {}; +#endif + struct meminfo; struct tag; extern void __init tag_fixup_mem32(struct tag *, char **, struct meminfo *); diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c index 355e962137c7..d675e727803d 100644 --- a/arch/arm/mach-orion5x/edmini_v2-setup.c +++ b/arch/arm/mach-orion5x/edmini_v2-setup.c @@ -115,69 +115,6 @@ static struct i2c_board_info __initdata edmini_v2_i2c_rtc = { }; /***************************************************************************** - * Sata - ****************************************************************************/ - -static struct mv_sata_platform_data edmini_v2_sata_data = { - .n_ports = 2, -}; - -/***************************************************************************** - * GPIO LED (simple - doesn't use hardware blinking support) - ****************************************************************************/ - -#define EDMINI_V2_GPIO_LED_POWER 16 - -static struct gpio_led edmini_v2_leds[] = { - { - .name = "power:blue", - .gpio = EDMINI_V2_GPIO_LED_POWER, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data edmini_v2_led_data = { - .num_leds = ARRAY_SIZE(edmini_v2_leds), - .leds = edmini_v2_leds, -}; - -static struct platform_device edmini_v2_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &edmini_v2_led_data, - }, -}; - -/**************************************************************************** - * GPIO key - ****************************************************************************/ - -#define EDMINI_V2_GPIO_KEY_POWER 18 - -static struct gpio_keys_button edmini_v2_buttons[] = { - { - .code = KEY_POWER, - .gpio = EDMINI_V2_GPIO_KEY_POWER, - .desc = "Power Button", - .active_low = 0, - }, -}; - -static struct gpio_keys_platform_data edmini_v2_button_data = { - .buttons = edmini_v2_buttons, - .nbuttons = ARRAY_SIZE(edmini_v2_buttons), -}; - -static struct platform_device edmini_v2_gpio_buttons = { - .name = "gpio-keys", - .id = -1, - .dev = { - .platform_data = &edmini_v2_button_data, - }, -}; - -/***************************************************************************** * General Setup ****************************************************************************/ static unsigned int edminiv2_mpp_modes[] __initdata = { @@ -207,13 +144,8 @@ static unsigned int edminiv2_mpp_modes[] __initdata = { 0, }; -static void __init edmini_v2_init(void) +void __init edmini_v2_init(void) { - /* - * Setup basic Orion functions. Need to be called early. - */ - orion5x_init(); - orion5x_mpp_conf(edminiv2_mpp_modes); /* @@ -221,15 +153,10 @@ static void __init edmini_v2_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&edmini_v2_eth_data); - orion5x_i2c_init(); - orion5x_sata_init(&edmini_v2_sata_data); - orion5x_uart0_init(); orion5x_setup_dev_boot_win(EDMINI_V2_NOR_BOOT_BASE, EDMINI_V2_NOR_BOOT_SIZE); platform_device_register(&edmini_v2_nor_flash); - platform_device_register(&edmini_v2_gpio_leds); - platform_device_register(&edmini_v2_gpio_buttons); pr_notice("edmini_v2: USB device port, flash write and power-off " "are not yet supported.\n"); @@ -247,16 +174,3 @@ static void __init edmini_v2_init(void) i2c_register_board_info(0, &edmini_v2_i2c_rtc, 1); } - -/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */ -MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2") - /* Maintainer: Christopher Moore <moore@free.fr> */ - .atag_offset = 0x100, - .init_machine = edmini_v2_init, - .map_io = orion5x_map_io, - .init_early = orion5x_init_early, - .init_irq = orion5x_init_irq, - .timer = &orion5x_timer, - .fixup = tag_fixup_mem32, - .restart = orion5x_restart, -MACHINE_END diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 9aa653b3eb32..6cc23cc83509 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -12,10 +12,12 @@ obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_CPU_IDLE) += sleep.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_clocks_data.o +obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20_speedo.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += sleep-t20.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks_data.o +obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_speedo.o obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += sleep-t30.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_SMP) += reset.o diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c index 71569c01afd2..734d9cc87f2e 100644 --- a/arch/arm/mach-tegra/board-dt-tegra20.c +++ b/arch/arm/mach-tegra/board-dt-tegra20.c @@ -89,6 +89,17 @@ struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { &tegra_ehci3_pdata), OF_DEV_AUXDATA("nvidia,tegra20-apbdma", TEGRA_APB_DMA_BASE, "tegra-apbdma", NULL), OF_DEV_AUXDATA("nvidia,tegra20-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sflash", 0x7000c380, "spi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D400, "spi_tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D600, "spi_tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000D800, "spi_tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-slink", 0x7000DA00, "spi_tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-host1x", 0x50000000, "host1x", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54200000, "tegradc.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dc", 0x54240000, "tegradc.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-hdmi", 0x54280000, "hdmi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-dsi", 0x54300000, "dsi", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-tvo", 0x542c0000, "tvo", NULL), {} }; @@ -102,8 +113,20 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "pll_a", "pll_p_out1", 56448000, true }, { "pll_a_out0", "pll_a", 11289600, true }, { "cdev1", NULL, 0, true }, + { "blink", "clk_32k", 32768, true }, { "i2s1", "pll_a_out0", 11289600, false}, { "i2s2", "pll_a_out0", 11289600, false}, + { "sdmmc1", "pll_p", 48000000, false}, + { "sdmmc3", "pll_p", 48000000, false}, + { "sdmmc4", "pll_p", 48000000, false}, + { "spi", "pll_p", 20000000, false }, + { "sbc1", "pll_p", 100000000, false }, + { "sbc2", "pll_p", 100000000, false }, + { "sbc3", "pll_p", 100000000, false }, + { "sbc4", "pll_p", 100000000, false }, + { "host1x", "pll_c", 150000000, false }, + { "disp1", "pll_p", 600000000, false }, + { "disp2", "pll_p", 600000000, false }, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c index e56170393a5b..6497d1236b08 100644 --- a/arch/arm/mach-tegra/board-dt-tegra30.c +++ b/arch/arm/mach-tegra/board-dt-tegra30.c @@ -51,6 +51,18 @@ struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("nvidia,tegra30-ahub", 0x70080000, "tegra30-ahub", NULL), OF_DEV_AUXDATA("nvidia,tegra30-apbdma", 0x6000a000, "tegra-apbdma", NULL), OF_DEV_AUXDATA("nvidia,tegra30-pwm", TEGRA_PWFM_BASE, "tegra-pwm", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D400, "spi_tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D600, "spi_tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000D800, "spi_tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DA00, "spi_tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DC00, "spi_tegra.4", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-slink", 0x7000DE00, "spi_tegra.5", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-host1x", 0x50000000, "host1x", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54200000, "tegradc.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dc", 0x54240000, "tegradc.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-hdmi", 0x54280000, "hdmi", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-dsi", 0x54300000, "dsi", NULL), + OF_DEV_AUXDATA("nvidia,tegra30-tvo", 0x542c0000, "tvo", NULL), {} }; @@ -61,11 +73,24 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { { "pll_a_out0", "pll_a", 11289600, true }, { "extern1", "pll_a_out0", 0, true }, { "clk_out_1", "extern1", 0, true }, + { "blink", "clk_32k", 32768, true }, { "i2s0", "pll_a_out0", 11289600, false}, { "i2s1", "pll_a_out0", 11289600, false}, { "i2s2", "pll_a_out0", 11289600, false}, { "i2s3", "pll_a_out0", 11289600, false}, { "i2s4", "pll_a_out0", 11289600, false}, + { "sdmmc1", "pll_p", 48000000, false}, + { "sdmmc3", "pll_p", 48000000, false}, + { "sdmmc4", "pll_p", 48000000, false}, + { "sbc1", "pll_p", 100000000, false}, + { "sbc2", "pll_p", 100000000, false}, + { "sbc3", "pll_p", 100000000, false}, + { "sbc4", "pll_p", 100000000, false}, + { "sbc5", "pll_p", 100000000, false}, + { "sbc6", "pll_p", 100000000, false}, + { "host1x", "pll_c", 150000000, false}, + { "disp1", "pll_p", 600000000, false}, + { "disp2", "pll_p", 600000000, false}, { NULL, NULL, 0, 0}, }; diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c index f688daa74978..3e03e5f15c14 100644 --- a/arch/arm/mach-tegra/common.c +++ b/arch/arm/mach-tegra/common.c @@ -104,25 +104,26 @@ static __initdata struct tegra_clk_init_table tegra30_clk_init_table[] = { { "clk_m", NULL, 0, true }, { "pll_p", "clk_m", 408000000, true }, { "pll_p_out1", "pll_p", 9600000, true }, + { "pll_p_out4", "pll_p", 102000000, true }, + { "sclk", "pll_p_out4", 102000000, true }, + { "hclk", "sclk", 102000000, true }, + { "pclk", "hclk", 51000000, true }, { NULL, NULL, 0, 0}, }; #endif -static void __init tegra_init_cache(u32 tag_latency, u32 data_latency) +static void __init tegra_init_cache(void) { #ifdef CONFIG_CACHE_L2X0 void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000; u32 aux_ctrl, cache_type; - writel_relaxed(tag_latency, p + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(data_latency, p + L2X0_DATA_LATENCY_CTRL); - cache_type = readl(p + L2X0_CACHE_TYPE); aux_ctrl = (cache_type & 0x700) << (17-8); - aux_ctrl |= 0x6C000001; + aux_ctrl |= 0x7C400001; - l2x0_init(p, aux_ctrl, 0x8200c3fe); + l2x0_of_init(aux_ctrl, 0x8200c3fe); #endif } @@ -134,7 +135,7 @@ void __init tegra20_init_early(void) tegra_init_fuse(); tegra2_init_clocks(); tegra_clk_init_from_table(tegra20_clk_init_table); - tegra_init_cache(0x331, 0x441); + tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); tegra20_hotplug_init(); @@ -147,7 +148,7 @@ void __init tegra30_init_early(void) tegra_init_fuse(); tegra30_init_clocks(); tegra_clk_init_from_table(tegra30_clk_init_table); - tegra_init_cache(0x441, 0x551); + tegra_init_cache(); tegra_pmc_init(); tegra_powergate_init(); tegra30_hotplug_init(); diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c index 6c752e8f1f06..8121742711fe 100644 --- a/arch/arm/mach-tegra/fuse.c +++ b/arch/arm/mach-tegra/fuse.c @@ -28,14 +28,21 @@ #define FUSE_UID_LOW 0x108 #define FUSE_UID_HIGH 0x10c #define FUSE_SKU_INFO 0x110 -#define FUSE_SPARE_BIT 0x200 + +#define TEGRA20_FUSE_SPARE_BIT 0x200 +#define TEGRA30_FUSE_SPARE_BIT 0x244 int tegra_sku_id; int tegra_cpu_process_id; int tegra_core_process_id; int tegra_chip_id; +int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */ +int tegra_soc_speedo_id; enum tegra_revision tegra_revision; +static int tegra_fuse_spare_bit; +static void (*tegra_init_speedo_data)(void); + /* The BCT to use at boot is specified by board straps that can be read * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs. */ @@ -56,14 +63,14 @@ static const char *tegra_revision_name[TEGRA_REVISION_MAX] = { [TEGRA_REVISION_A04] = "A04", }; -static inline u32 tegra_fuse_readl(unsigned long offset) +u32 tegra_fuse_readl(unsigned long offset) { return tegra_apb_readl(TEGRA_FUSE_BASE + offset); } -static inline bool get_spare_fuse(int bit) +bool tegra_spare_fuse(int bit) { - return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4); + return tegra_fuse_readl(tegra_fuse_spare_bit + bit * 4); } static enum tegra_revision tegra_get_revision(u32 id) @@ -77,7 +84,7 @@ static enum tegra_revision tegra_get_revision(u32 id) return TEGRA_REVISION_A02; case 3: if (tegra_chip_id == TEGRA20 && - (get_spare_fuse(18) || get_spare_fuse(19))) + (tegra_spare_fuse(18) || tegra_spare_fuse(19))) return TEGRA_REVISION_A03p; else return TEGRA_REVISION_A03; @@ -88,6 +95,16 @@ static enum tegra_revision tegra_get_revision(u32 id) } } +static void tegra_get_process_id(void) +{ + u32 reg; + + reg = tegra_fuse_readl(tegra_fuse_spare_bit); + tegra_cpu_process_id = (reg >> 6) & 3; + reg = tegra_fuse_readl(tegra_fuse_spare_bit); + tegra_core_process_id = (reg >> 12) & 3; +} + void tegra_init_fuse(void) { u32 id; @@ -99,19 +116,29 @@ void tegra_init_fuse(void) reg = tegra_fuse_readl(FUSE_SKU_INFO); tegra_sku_id = reg & 0xFF; - reg = tegra_fuse_readl(FUSE_SPARE_BIT); - tegra_cpu_process_id = (reg >> 6) & 3; - - reg = tegra_fuse_readl(FUSE_SPARE_BIT); - tegra_core_process_id = (reg >> 12) & 3; - reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT); tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT; id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804); tegra_chip_id = (id >> 8) & 0xff; + switch (tegra_chip_id) { + case TEGRA20: + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra20_init_speedo_data; + break; + case TEGRA30: + tegra_fuse_spare_bit = TEGRA30_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra30_init_speedo_data; + break; + default: + pr_warn("Tegra: unknown chip id %d\n", tegra_chip_id); + tegra_fuse_spare_bit = TEGRA20_FUSE_SPARE_BIT; + tegra_init_speedo_data = &tegra_get_process_id; + } + tegra_revision = tegra_get_revision(id); + tegra_init_speedo_data(); pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", tegra_revision_name[tegra_revision], diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h index d2107b2cb85a..ff1383dd61a7 100644 --- a/arch/arm/mach-tegra/fuse.h +++ b/arch/arm/mach-tegra/fuse.h @@ -42,11 +42,27 @@ extern int tegra_sku_id; extern int tegra_cpu_process_id; extern int tegra_core_process_id; extern int tegra_chip_id; +extern int tegra_cpu_speedo_id; /* only exist in Tegra30 and later */ +extern int tegra_soc_speedo_id; extern enum tegra_revision tegra_revision; extern int tegra_bct_strapping; unsigned long long tegra_chip_uid(void); void tegra_init_fuse(void); +bool tegra_spare_fuse(int bit); +u32 tegra_fuse_readl(unsigned long offset); + +#ifdef CONFIG_ARCH_TEGRA_2x_SOC +void tegra20_init_speedo_data(void); +#else +static inline void tegra20_init_speedo_data(void) {} +#endif + +#ifdef CONFIG_ARCH_TEGRA_3x_SOC +void tegra30_init_speedo_data(void); +#else +static inline void tegra30_init_speedo_data(void) {} +#endif #endif diff --git a/arch/arm/mach-tegra/tegra20_clocks_data.c b/arch/arm/mach-tegra/tegra20_clocks_data.c index 9615ee39c353..a23a0734e352 100644 --- a/arch/arm/mach-tegra/tegra20_clocks_data.c +++ b/arch/arm/mach-tegra/tegra20_clocks_data.c @@ -246,11 +246,16 @@ static struct clk_pll_freq_table tegra_pll_d_freq_table[] = { { 19200000, 216000000, 135, 12, 1, 3}, { 26000000, 216000000, 216, 26, 1, 4}, + { 12000000, 297000000, 99, 4, 1, 4 }, + { 12000000, 339000000, 113, 4, 1, 4 }, + { 12000000, 594000000, 594, 12, 1, 8}, { 13000000, 594000000, 594, 13, 1, 8}, { 19200000, 594000000, 495, 16, 1, 8}, { 26000000, 594000000, 594, 26, 1, 8}, + { 12000000, 616000000, 616, 12, 1, 8}, + { 12000000, 1000000000, 1000, 12, 1, 12}, { 13000000, 1000000000, 1000, 13, 1, 12}, { 19200000, 1000000000, 625, 12, 1, 8}, @@ -1036,9 +1041,6 @@ static struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), - CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), - CLK_DUPLICATE("host1x", "tegra_grhost", "host1x"), CLK_DUPLICATE("2d", "tegra_grhost", "gr2d"), CLK_DUPLICATE("3d", "tegra_grhost", "gr3d"), CLK_DUPLICATE("epp", "tegra_grhost", "epp"), @@ -1051,6 +1053,9 @@ static struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("pll_p_out3", "tegra-i2c.1", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), + CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), + CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), + CLK_DUPLICATE("pll_d_out0", "hdmi", "parent"), }; #define CLK(dev, con, ck) \ diff --git a/arch/arm/mach-tegra/tegra20_speedo.c b/arch/arm/mach-tegra/tegra20_speedo.c new file mode 100644 index 000000000000..fa6eb570623f --- /dev/null +++ b/arch/arm/mach-tegra/tegra20_speedo.c @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/bug.h> + +#include "fuse.h" + +#define CPU_SPEEDO_LSBIT 20 +#define CPU_SPEEDO_MSBIT 29 +#define CPU_SPEEDO_REDUND_LSBIT 30 +#define CPU_SPEEDO_REDUND_MSBIT 39 +#define CPU_SPEEDO_REDUND_OFFS (CPU_SPEEDO_REDUND_MSBIT - CPU_SPEEDO_MSBIT) + +#define CORE_SPEEDO_LSBIT 40 +#define CORE_SPEEDO_MSBIT 47 +#define CORE_SPEEDO_REDUND_LSBIT 48 +#define CORE_SPEEDO_REDUND_MSBIT 55 +#define CORE_SPEEDO_REDUND_OFFS (CORE_SPEEDO_REDUND_MSBIT - CORE_SPEEDO_MSBIT) + +#define SPEEDO_MULT 4 + +#define PROCESS_CORNERS_NUM 4 + +#define SPEEDO_ID_SELECT_0(rev) ((rev) <= 2) +#define SPEEDO_ID_SELECT_1(sku) \ + (((sku) != 20) && ((sku) != 23) && ((sku) != 24) && \ + ((sku) != 27) && ((sku) != 28)) + +enum { + SPEEDO_ID_0, + SPEEDO_ID_1, + SPEEDO_ID_2, + SPEEDO_ID_COUNT, +}; + +static const u32 cpu_process_speedos[][PROCESS_CORNERS_NUM] = { + {315, 366, 420, UINT_MAX}, + {303, 368, 419, UINT_MAX}, + {316, 331, 383, UINT_MAX}, +}; + +static const u32 core_process_speedos[][PROCESS_CORNERS_NUM] = { + {165, 195, 224, UINT_MAX}, + {165, 195, 224, UINT_MAX}, + {165, 195, 224, UINT_MAX}, +}; + +void tegra20_init_speedo_data(void) +{ + u32 reg; + u32 val; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != SPEEDO_ID_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != SPEEDO_ID_COUNT); + + if (SPEEDO_ID_SELECT_0(tegra_revision)) + tegra_soc_speedo_id = SPEEDO_ID_0; + else if (SPEEDO_ID_SELECT_1(tegra_sku_id)) + tegra_soc_speedo_id = SPEEDO_ID_1; + else + tegra_soc_speedo_id = SPEEDO_ID_2; + + val = 0; + for (i = CPU_SPEEDO_MSBIT; i >= CPU_SPEEDO_LSBIT; i--) { + reg = tegra_spare_fuse(i) | + tegra_spare_fuse(i + CPU_SPEEDO_REDUND_OFFS); + val = (val << 1) | (reg & 0x1); + } + val = val * SPEEDO_MULT; + pr_debug("%s CPU speedo value %u\n", __func__, val); + + for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) { + if (val <= cpu_process_speedos[tegra_soc_speedo_id][i]) + break; + } + tegra_cpu_process_id = i; + + val = 0; + for (i = CORE_SPEEDO_MSBIT; i >= CORE_SPEEDO_LSBIT; i--) { + reg = tegra_spare_fuse(i) | + tegra_spare_fuse(i + CORE_SPEEDO_REDUND_OFFS); + val = (val << 1) | (reg & 0x1); + } + val = val * SPEEDO_MULT; + pr_debug("%s Core speedo value %u\n", __func__, val); + + for (i = 0; i < (PROCESS_CORNERS_NUM - 1); i++) { + if (val <= core_process_speedos[tegra_soc_speedo_id][i]) + break; + } + tegra_core_process_id = i; + + pr_info("Tegra20 Soc Speedo ID %d", tegra_soc_speedo_id); +} diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c index 000239d68393..f5b453f4bf4d 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.c +++ b/arch/arm/mach-tegra/tegra30_clocks.c @@ -791,6 +791,112 @@ struct clk_ops tegra30_twd_ops = { .recalc_rate = tegra30_twd_clk_recalc_rate, }; +/* bus clock functions */ +static int tegra30_bus_clk_is_enabled(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val = clk_readl(c->reg); + + c->state = ((val >> c->reg_shift) & BUS_CLK_DISABLE) ? OFF : ON; + return c->state; +} + +static int tegra30_bus_clk_enable(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val; + + val = clk_readl(c->reg); + val &= ~(BUS_CLK_DISABLE << c->reg_shift); + clk_writel(val, c->reg); + + return 0; +} + +static void tegra30_bus_clk_disable(struct clk_hw *hw) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val; + + val = clk_readl(c->reg); + val |= BUS_CLK_DISABLE << c->reg_shift; + clk_writel(val, c->reg); +} + +static unsigned long tegra30_bus_clk_recalc_rate(struct clk_hw *hw, + unsigned long prate) +{ + struct clk_tegra *c = to_clk_tegra(hw); + u32 val = clk_readl(c->reg); + u64 rate = prate; + + c->div = ((val >> c->reg_shift) & BUS_CLK_DIV_MASK) + 1; + c->mul = 1; + + if (c->mul != 0 && c->div != 0) { + rate *= c->mul; + rate += c->div - 1; /* round up */ + do_div(rate, c->div); + } + return rate; +} + +static int tegra30_bus_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_tegra *c = to_clk_tegra(hw); + int ret = -EINVAL; + u32 val; + int i; + + val = clk_readl(c->reg); + for (i = 1; i <= 4; i++) { + if (rate == parent_rate / i) { + val &= ~(BUS_CLK_DIV_MASK << c->reg_shift); + val |= (i - 1) << c->reg_shift; + clk_writel(val, c->reg); + c->div = i; + c->mul = 1; + ret = 0; + break; + } + } + + return ret; +} + +static long tegra30_bus_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long parent_rate = *prate; + s64 divider; + + if (rate >= parent_rate) + return parent_rate; + + divider = parent_rate; + divider += rate - 1; + do_div(divider, rate); + + if (divider < 0) + return divider; + + if (divider > 4) + divider = 4; + do_div(parent_rate, divider); + + return parent_rate; +} + +struct clk_ops tegra30_bus_ops = { + .is_enabled = tegra30_bus_clk_is_enabled, + .enable = tegra30_bus_clk_enable, + .disable = tegra30_bus_clk_disable, + .set_rate = tegra30_bus_clk_set_rate, + .round_rate = tegra30_bus_clk_round_rate, + .recalc_rate = tegra30_bus_clk_recalc_rate, +}; + /* Blink output functions */ static int tegra30_blink_clk_is_enabled(struct clk_hw *hw) { diff --git a/arch/arm/mach-tegra/tegra30_clocks.h b/arch/arm/mach-tegra/tegra30_clocks.h index f2f88fef6b8b..7a34adb2f72d 100644 --- a/arch/arm/mach-tegra/tegra30_clocks.h +++ b/arch/arm/mach-tegra/tegra30_clocks.h @@ -34,6 +34,7 @@ extern struct clk_ops tegra_clk_out_ops; extern struct clk_ops tegra30_super_ops; extern struct clk_ops tegra30_blink_clk_ops; extern struct clk_ops tegra30_twd_ops; +extern struct clk_ops tegra30_bus_ops; extern struct clk_ops tegra30_periph_clk_ops; extern struct clk_ops tegra30_dsib_clk_ops; extern struct clk_ops tegra_nand_clk_ops; diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c index 3d2e5532a9ea..6942c7add3bb 100644 --- a/arch/arm/mach-tegra/tegra30_clocks_data.c +++ b/arch/arm/mach-tegra/tegra30_clocks_data.c @@ -711,6 +711,50 @@ static struct clk tegra_clk_sclk = { .num_parents = ARRAY_SIZE(mux_sclk), }; +static const char *tegra_hclk_parent_names[] = { + "tegra_sclk", +}; + +static struct clk *tegra_hclk_parents[] = { + &tegra_clk_sclk, +}; + +static struct clk tegra_hclk; +static struct clk_tegra tegra_hclk_hw = { + .hw = { + .clk = &tegra_hclk, + }, + .flags = DIV_BUS, + .reg = 0x30, + .reg_shift = 4, + .max_rate = 378000000, + .min_rate = 12000000, +}; +DEFINE_CLK_TEGRA(hclk, 0, &tegra30_bus_ops, 0, tegra_hclk_parent_names, + tegra_hclk_parents, &tegra_clk_sclk); + +static const char *tegra_pclk_parent_names[] = { + "tegra_hclk", +}; + +static struct clk *tegra_pclk_parents[] = { + &tegra_hclk, +}; + +static struct clk tegra_pclk; +static struct clk_tegra tegra_pclk_hw = { + .hw = { + .clk = &tegra_pclk, + }, + .flags = DIV_BUS, + .reg = 0x30, + .reg_shift = 0, + .max_rate = 167000000, + .min_rate = 12000000, +}; +DEFINE_CLK_TEGRA(pclk, 0, &tegra30_bus_ops, 0, tegra_pclk_parent_names, + tegra_pclk_parents, &tegra_hclk); + static const char *mux_blink[] = { "clk_32k", }; @@ -1254,8 +1298,6 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("usbd", "utmip-pad", NULL), CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL), CLK_DUPLICATE("usbd", "tegra-otg", NULL), - CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"), - CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"), CLK_DUPLICATE("dsib", "tegradc.0", "dsib"), CLK_DUPLICATE("dsia", "tegradc.1", "dsia"), CLK_DUPLICATE("bsev", "tegra-avp", "bsev"), @@ -1293,6 +1335,9 @@ struct clk_duplicate tegra_clk_duplicates[] = { CLK_DUPLICATE("pll_p_out3", "tegra-i2c.2", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.3", "fast-clk"), CLK_DUPLICATE("pll_p_out3", "tegra-i2c.4", "fast-clk"), + CLK_DUPLICATE("pll_p", "tegradc.0", "parent"), + CLK_DUPLICATE("pll_p", "tegradc.1", "parent"), + CLK_DUPLICATE("pll_d2_out0", "hdmi", "parent"), }; struct clk *tegra_ptr_clks[] = { @@ -1325,6 +1370,8 @@ struct clk *tegra_ptr_clks[] = { &tegra_cml1, &tegra_pciex, &tegra_clk_sclk, + &tegra_hclk, + &tegra_pclk, &tegra_clk_blink, &tegra30_clk_twd, }; diff --git a/arch/arm/mach-tegra/tegra30_speedo.c b/arch/arm/mach-tegra/tegra30_speedo.c new file mode 100644 index 000000000000..125cb16424a6 --- /dev/null +++ b/arch/arm/mach-tegra/tegra30_speedo.c @@ -0,0 +1,292 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/kernel.h> +#include <linux/bug.h> + +#include "fuse.h" + +#define CORE_PROCESS_CORNERS_NUM 1 +#define CPU_PROCESS_CORNERS_NUM 6 + +#define FUSE_SPEEDO_CALIB_0 0x114 +#define FUSE_PACKAGE_INFO 0X1FC +#define FUSE_TEST_PROG_VER 0X128 + +#define G_SPEEDO_BIT_MINUS1 58 +#define G_SPEEDO_BIT_MINUS1_R 59 +#define G_SPEEDO_BIT_MINUS2 60 +#define G_SPEEDO_BIT_MINUS2_R 61 +#define LP_SPEEDO_BIT_MINUS1 62 +#define LP_SPEEDO_BIT_MINUS1_R 63 +#define LP_SPEEDO_BIT_MINUS2 64 +#define LP_SPEEDO_BIT_MINUS2_R 65 + +enum { + THRESHOLD_INDEX_0, + THRESHOLD_INDEX_1, + THRESHOLD_INDEX_2, + THRESHOLD_INDEX_3, + THRESHOLD_INDEX_4, + THRESHOLD_INDEX_5, + THRESHOLD_INDEX_6, + THRESHOLD_INDEX_7, + THRESHOLD_INDEX_8, + THRESHOLD_INDEX_9, + THRESHOLD_INDEX_10, + THRESHOLD_INDEX_11, + THRESHOLD_INDEX_COUNT, +}; + +static const u32 core_process_speedos[][CORE_PROCESS_CORNERS_NUM] = { + {180}, + {170}, + {195}, + {180}, + {168}, + {192}, + {180}, + {170}, + {195}, + {180}, + {180}, + {180}, +}; + +static const u32 cpu_process_speedos[][CPU_PROCESS_CORNERS_NUM] = { + {306, 338, 360, 376, UINT_MAX}, + {295, 336, 358, 375, UINT_MAX}, + {325, 325, 358, 375, UINT_MAX}, + {325, 325, 358, 375, UINT_MAX}, + {292, 324, 348, 364, UINT_MAX}, + {324, 324, 348, 364, UINT_MAX}, + {324, 324, 348, 364, UINT_MAX}, + {295, 336, 358, 375, UINT_MAX}, + {358, 358, 358, 358, 397, UINT_MAX}, + {364, 364, 364, 364, 397, UINT_MAX}, + {295, 336, 358, 375, 391, UINT_MAX}, + {295, 336, 358, 375, 391, UINT_MAX}, +}; + +static int threshold_index; +static int package_id; + +static void fuse_speedo_calib(u32 *speedo_g, u32 *speedo_lp) +{ + u32 reg; + int ate_ver; + int bit_minus1; + int bit_minus2; + + reg = tegra_fuse_readl(FUSE_SPEEDO_CALIB_0); + + *speedo_lp = (reg & 0xFFFF) * 4; + *speedo_g = ((reg >> 16) & 0xFFFF) * 4; + + ate_ver = tegra_fuse_readl(FUSE_TEST_PROG_VER); + pr_info("%s: ATE prog ver %d.%d\n", __func__, ate_ver/10, ate_ver%10); + + if (ate_ver >= 26) { + bit_minus1 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1); + bit_minus1 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS1_R); + bit_minus2 = tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2); + bit_minus2 |= tegra_spare_fuse(LP_SPEEDO_BIT_MINUS2_R); + *speedo_lp |= (bit_minus1 << 1) | bit_minus2; + + bit_minus1 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS1); + bit_minus1 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS1_R); + bit_minus2 = tegra_spare_fuse(G_SPEEDO_BIT_MINUS2); + bit_minus2 |= tegra_spare_fuse(G_SPEEDO_BIT_MINUS2_R); + *speedo_g |= (bit_minus1 << 1) | bit_minus2; + } else { + *speedo_lp |= 0x3; + *speedo_g |= 0x3; + } +} + +static void rev_sku_to_speedo_ids(int rev, int sku) +{ + switch (rev) { + case TEGRA_REVISION_A01: + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + case TEGRA_REVISION_A02: + case TEGRA_REVISION_A03: + switch (sku) { + case 0x87: + case 0x82: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_1; + break; + case 0x81: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_2; + break; + case 2: + tegra_cpu_speedo_id = 4; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_7; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x80: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 5; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_8; + break; + case 2: + tegra_cpu_speedo_id = 6; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_9; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x83: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 7; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_10; + break; + case 2: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_3; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + case 0x8F: + tegra_cpu_speedo_id = 8; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_11; + break; + case 0x08: + tegra_cpu_speedo_id = 1; + tegra_soc_speedo_id = 1; + threshold_index = THRESHOLD_INDEX_4; + break; + case 0x02: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_5; + break; + case 0x04: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_6; + break; + case 0: + switch (package_id) { + case 1: + tegra_cpu_speedo_id = 2; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_2; + break; + case 2: + tegra_cpu_speedo_id = 3; + tegra_soc_speedo_id = 2; + threshold_index = THRESHOLD_INDEX_3; + break; + default: + pr_err("Tegra30: Unknown pkg %d\n", package_id); + BUG(); + break; + } + break; + default: + pr_warn("Tegra30: Unknown SKU %d\n", sku); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + } + break; + default: + pr_warn("Tegra30: Unknown chip rev %d\n", rev); + tegra_cpu_speedo_id = 0; + tegra_soc_speedo_id = 0; + threshold_index = THRESHOLD_INDEX_0; + break; + } +} + +void tegra30_init_speedo_data(void) +{ + u32 cpu_speedo_val; + u32 core_speedo_val; + int i; + + BUILD_BUG_ON(ARRAY_SIZE(cpu_process_speedos) != + THRESHOLD_INDEX_COUNT); + BUILD_BUG_ON(ARRAY_SIZE(core_process_speedos) != + THRESHOLD_INDEX_COUNT); + + package_id = tegra_fuse_readl(FUSE_PACKAGE_INFO) & 0x0F; + + rev_sku_to_speedo_ids(tegra_revision, tegra_sku_id); + fuse_speedo_calib(&cpu_speedo_val, &core_speedo_val); + pr_debug("%s CPU speedo value %u\n", __func__, cpu_speedo_val); + pr_debug("%s Core speedo value %u\n", __func__, core_speedo_val); + + for (i = 0; i < CPU_PROCESS_CORNERS_NUM; i++) { + if (cpu_speedo_val < cpu_process_speedos[threshold_index][i]) + break; + } + tegra_cpu_process_id = i - 1; + + if (tegra_cpu_process_id == -1) { + pr_warn("Tegra30: CPU speedo value %3d out of range", + cpu_speedo_val); + tegra_cpu_process_id = 0; + tegra_cpu_speedo_id = 1; + } + + for (i = 0; i < CORE_PROCESS_CORNERS_NUM; i++) { + if (core_speedo_val < core_process_speedos[threshold_index][i]) + break; + } + tegra_core_process_id = i - 1; + + if (tegra_core_process_id == -1) { + pr_warn("Tegra30: CORE speedo value %3d out of range", + core_speedo_val); + tegra_core_process_id = 0; + tegra_soc_speedo_id = 1; + } + + pr_info("Tegra30: CPU Speedo ID %d, Soc Speedo ID %d", + tegra_cpu_speedo_id, tegra_soc_speedo_id); +} diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 070629a95625..7adbed5df8a1 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -150,15 +150,6 @@ static struct platform_device snd_soc_mop500 = { }, }; -/* Platform device for Ux500-PCM */ -static struct platform_device ux500_pcm = { - .name = "ux500-pcm", - .id = 0, - .dev = { - .platform_data = NULL, - }, -}; - struct msp_i2s_platform_data msp2_platform_data = { .id = MSP_I2S_2, .msp_i2s_dma_rx = &msp2_dma_rx, @@ -186,10 +177,3 @@ void mop500_audio_init(struct device *parent) db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, &msp3_platform_data); } - -/* Due for removal once the MSP driver has been fully DT:ed. */ -void mop500_of_audio_init(struct device *parent) -{ - pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__); - platform_device_register(&ux500_pcm); -} diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c index 8c979770d872..564f57d5d8a7 100644 --- a/arch/arm/mach-ux500/board-mop500-stuib.c +++ b/arch/arm/mach-ux500/board-mop500-stuib.c @@ -162,18 +162,6 @@ static struct bu21013_platform_device tsc_plat_device = { .y_flip = true, }; -static struct bu21013_platform_device tsc_plat2_device = { - .cs_en = bu21013_gpio_board_init, - .cs_dis = bu21013_gpio_board_exit, - .irq_read_val = bu21013_read_pin_val, - .irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN), - .touch_x_max = TOUCH_XMAX, - .touch_y_max = TOUCH_YMAX, - .ext_clk = false, - .x_flip = false, - .y_flip = true, -}; - static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { { I2C_BOARD_INFO("bu21013_tp", 0x5C), @@ -181,21 +169,17 @@ static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = { }, { I2C_BOARD_INFO("bu21013_tp", 0x5D), - .platform_data = &tsc_plat2_device, + .platform_data = &tsc_plat_device, }, }; void __init mop500_stuib_init(void) { - if (machine_is_hrefv60()) { + if (machine_is_hrefv60()) tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO; - tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO; - } else { + else tsc_plat_device.cs_pin = GPIO_BU21013_CS; - tsc_plat2_device.cs_pin = GPIO_BU21013_CS; - - } mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib, ARRAY_SIZE(mop500_i2c0_devices_stuib)); diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 416d436111f2..daa4237ac0dc 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -33,8 +33,6 @@ #include <linux/smsc911x.h> #include <linux/gpio_keys.h> #include <linux/delay.h> -#include <linux/of.h> -#include <linux/of_platform.h> #include <linux/leds.h> #include <linux/pinctrl/consumer.h> @@ -464,7 +462,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { }; #endif -static struct pl022_ssp_controller ssp0_plat = { +struct pl022_ssp_controller ssp0_plat = { .bus_id = 0, #ifdef CONFIG_STE_DMA40 .enable_dma = 1, @@ -541,7 +539,7 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = { }; #endif -static struct amba_pl011_data uart0_plat = { +struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, @@ -549,7 +547,7 @@ static struct amba_pl011_data uart0_plat = { #endif }; -static struct amba_pl011_data uart1_plat = { +struct amba_pl011_data uart1_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart1_dma_cfg_rx, @@ -557,7 +555,7 @@ static struct amba_pl011_data uart1_plat = { #endif }; -static struct amba_pl011_data uart2_plat = { +struct amba_pl011_data uart2_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart2_dma_cfg_rx, @@ -618,8 +616,6 @@ static void __init mop500_init_machine(void) /* This board has full regulator constraints */ regulator_has_full_constraints(); - - mop500_uib_init(); } static void __init snowball_init_machine(void) @@ -684,8 +680,6 @@ static void __init hrefv60_init_machine(void) /* This board has full regulator constraints */ regulator_has_full_constraints(); - - mop500_uib_init(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") @@ -721,135 +715,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") .timer = &ux500_timer, .handle_irq = gic_handle_irq, .init_machine = snowball_init_machine, - .init_late = ux500_init_late, -MACHINE_END - -#ifdef CONFIG_MACH_UX500_DT - -struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { - /* Requires call-back bindings. */ - OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), - /* Requires DMA and call-back bindings. */ - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), - /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), - OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), - OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), - /* Requires clock name bindings. */ - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), - OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), - OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), - /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), - /* Requires clock name and DMA bindings. */ - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, - "ux500-msp-i2s.0", &msp0_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, - "ux500-msp-i2s.1", &msp1_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, - "ux500-msp-i2s.2", &msp2_platform_data), - OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, - "ux500-msp-i2s.3", &msp3_platform_data), - {}, -}; - -static const struct of_device_id u8500_local_bus_nodes[] = { - /* only create devices below soc node */ - { .compatible = "stericsson,db8500", }, - { .compatible = "stericsson,db8500-prcmu", }, - { .compatible = "simple-bus"}, - { }, -}; - -static void __init u8500_init_machine(void) -{ - struct device *parent = NULL; - int i2c0_devs; - int i; - - /* Pinmaps must be in place before devices register */ - if (of_machine_is_compatible("st-ericsson,mop500")) - mop500_pinmaps_init(); - else if (of_machine_is_compatible("calaosystems,snowball-a9500")) - snowball_pinmaps_init(); - else if (of_machine_is_compatible("st-ericsson,hrefv60+")) - hrefv60_pinmaps_init(); - - parent = u8500_of_init_devices(); - - for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++) - mop500_platform_devs[i]->dev.parent = parent; - - /* automatically probe child nodes of db8500 device */ - of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); - - if (of_machine_is_compatible("st-ericsson,mop500")) { - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; - - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_sdi_init(parent); - mop500_audio_init(parent); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); - i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); - i2c_register_board_info(2, mop500_i2c2_devices, - ARRAY_SIZE(mop500_i2c2_devices)); - - mop500_uib_init(); - - } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) { - mop500_of_audio_init(parent); - } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) { - /* - * The HREFv60 board removed a GPIO expander and routed - * all these GPIO pins to the internal GPIO controller - * instead. - */ - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - platform_add_devices(mop500_platform_devs, - ARRAY_SIZE(mop500_platform_devs)); - - mop500_uib_init(); - } - - /* This board has full regulator constraints */ - regulator_has_full_constraints(); -} - -static const char * u8500_dt_board_compat[] = { - "calaosystems,snowball-a9500", - "st-ericsson,hrefv60+", - "st-ericsson,u8500", - "st-ericsson,mop500", - NULL, -}; - - -DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)") - .smp = smp_ops(ux500_smp_ops), - .map_io = u8500_map_io, - .init_irq = ux500_init_irq, - /* we re-use nomadik timer here */ - .timer = &ux500_timer, - .handle_irq = gic_handle_irq, - .init_machine = u8500_init_machine, - .init_late = ux500_init_late, - .dt_compat = u8500_dt_board_compat, + .init_late = NULL, MACHINE_END -#endif diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index aca39a68712a..eaa605f5d90d 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -89,6 +89,10 @@ extern struct msp_i2s_platform_data msp1_platform_data; extern struct msp_i2s_platform_data msp2_platform_data; extern struct msp_i2s_platform_data msp3_platform_data; extern struct arm_pmu_platdata db8500_pmu_platdata; +extern struct amba_pl011_data uart0_plat; +extern struct amba_pl011_data uart1_plat; +extern struct amba_pl011_data uart2_plat; +extern struct pl022_ssp_controller ssp0_plat; extern void mop500_sdi_init(struct device *parent); extern void snowball_sdi_init(struct device *parent); @@ -100,14 +104,8 @@ void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); void __init hrefv60_pinmaps_init(void); void mop500_audio_init(struct device *parent); -/* Due for removal once the MSP driver has been fully DT:ed. */ -void mop500_of_audio_init(struct device *parent); int __init mop500_uib_init(void); void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info, unsigned n); - -/* TODO: Once all pieces are DT:ed, remove completely. */ -struct device * __init u8500_of_init_devices(void); - #endif diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index bcdfe6b1d453..4c6ce012daef 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -17,9 +17,15 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/dbx500-prcmu.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/regulator/machine.h> #include <asm/pmu.h> #include <asm/mach/map.h> +#include <asm/mach/arch.h> +#include <asm/hardware/gic.h> #include <plat/gpio-nomadik.h> #include <mach/hardware.h> #include <mach/setup.h> @@ -29,6 +35,7 @@ #include "devices-db8500.h" #include "ste-dma40-db8500.h" +#include "board-mop500.h" /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { @@ -215,7 +222,7 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); + "cpufreq-ux500", -1, NULL, 0); for (i = 0; i < ARRAY_SIZE(platform_devs); i++) platform_devs[i]->dev.parent = parent; @@ -227,17 +234,17 @@ struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500) return parent; } +#ifdef CONFIG_MACH_UX500_DT + /* TODO: Once all pieces are DT:ed, remove completely. */ -struct device * __init u8500_of_init_devices(void) +static struct device * __init u8500_of_init_devices(void) { - struct device *parent; - - parent = db8500_soc_device_init(); + struct device *parent = db8500_soc_device_init(); db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); platform_device_register_data(parent, - "cpufreq-u8500", -1, NULL, 0); + "cpufreq-ux500", -1, NULL, 0); u8500_dma40_device.dev.parent = parent; @@ -251,3 +258,95 @@ struct device * __init u8500_of_init_devices(void) return parent; } + +static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { + /* Requires call-back bindings. */ + OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata), + /* Requires DMA bindings. */ + OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat), + OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat), + OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat), + OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data), + OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data), + /* Requires clock name bindings. */ + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), + OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), + OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), + /* Requires device name bindings. */ + OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), + /* Requires clock name and DMA bindings. */ + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, + "ux500-msp-i2s.0", &msp0_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000, + "ux500-msp-i2s.1", &msp1_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000, + "ux500-msp-i2s.2", &msp2_platform_data), + OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000, + "ux500-msp-i2s.3", &msp3_platform_data), + {}, +}; + +static const struct of_device_id u8500_local_bus_nodes[] = { + /* only create devices below soc node */ + { .compatible = "stericsson,db8500", }, + { .compatible = "stericsson,db8500-prcmu", }, + { .compatible = "simple-bus"}, + { }, +}; + +static void __init u8500_init_machine(void) +{ + struct device *parent = NULL; + + /* Pinmaps must be in place before devices register */ + if (of_machine_is_compatible("st-ericsson,mop500")) + mop500_pinmaps_init(); + else if (of_machine_is_compatible("calaosystems,snowball-a9500")) + snowball_pinmaps_init(); + else if (of_machine_is_compatible("st-ericsson,hrefv60+")) + hrefv60_pinmaps_init(); + else if (of_machine_is_compatible("st-ericsson,ccu9540")) {} + /* TODO: Add pinmaps for ccu9540 board. */ + + /* TODO: Export SoC, USB, cpu-freq and DMA40 */ + parent = u8500_of_init_devices(); + + /* automatically probe child nodes of db8500 device */ + of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent); +} + +static const char * stericsson_dt_platform_compat[] = { + "st-ericsson,u8500", + "st-ericsson,u8540", + "st-ericsson,u9500", + "st-ericsson,u9540", + NULL, +}; + +DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)") + .smp = smp_ops(ux500_smp_ops), + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .handle_irq = gic_handle_irq, + .init_machine = u8500_init_machine, + .init_late = NULL, + .dt_compat = stericsson_dt_platform_compat, +MACHINE_END + +#endif diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 1f3fbc2bb776..721e7b4275f3 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -26,6 +26,8 @@ #include <mach/setup.h> #include <mach/devices.h> +#include "board-mop500.h" + void __iomem *_PRCMU_BASE; /* @@ -82,6 +84,7 @@ void __init ux500_init_irq(void) void __init ux500_init_late(void) { + mop500_uib_init(); } static const char * __init ux500_get_machine(void) diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index ba8d14f78d4d..79bf5fb4dad3 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -19,12 +19,15 @@ #include <linux/cpumask.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/clk/zynq.h> +#include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> #include <linux/of.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> #include <asm/mach-types.h> #include <asm/page.h> #include <asm/hardware/gic.h> @@ -84,15 +87,36 @@ static struct map_desc io_desc[] __initdata = { #ifdef CONFIG_DEBUG_LL { - .virtual = UART0_VIRT, - .pfn = __phys_to_pfn(UART0_PHYS), - .length = UART0_SIZE, + .virtual = LL_UART_VADDR, + .pfn = __phys_to_pfn(LL_UART_PADDR), + .length = UART_SIZE, .type = MT_DEVICE, }, #endif }; +static void __init xilinx_zynq_timer_init(void) +{ + struct device_node *np; + void __iomem *slcr; + + np = of_find_compatible_node(NULL, NULL, "xlnx,zynq-slcr"); + slcr = of_iomap(np, 0); + WARN_ON(!slcr); + + xilinx_zynq_clocks_init(slcr); + + xttcpss_timer_init(); +} + +/* + * Instantiate and initialize the system timer structure + */ +static struct sys_timer xttcpss_sys_timer = { + .init = xilinx_zynq_timer_init, +}; + /** * xilinx_map_io() - Create memory mappings needed for early I/O. */ @@ -102,7 +126,8 @@ static void __init xilinx_map_io(void) } static const char *xilinx_dt_match[] = { - "xlnx,zynq-ep107", + "xlnx,zynq-zc702", + "xlnx,zynq-7000", NULL }; diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h index a009644a1555..954b91c13c91 100644 --- a/arch/arm/mach-zynq/common.h +++ b/arch/arm/mach-zynq/common.h @@ -17,8 +17,6 @@ #ifndef __MACH_ZYNQ_COMMON_H__ #define __MACH_ZYNQ_COMMON_H__ -#include <asm/mach/time.h> - -extern struct sys_timer xttcpss_sys_timer; +void __init xttcpss_timer_init(void); #endif diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h index 1b8bf0ecbcb0..5ebbd8e6eeee 100644 --- a/arch/arm/mach-zynq/include/mach/zynq_soc.h +++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h @@ -25,8 +25,9 @@ * address that is known to work. */ #define UART0_PHYS 0xE0000000 -#define UART0_SIZE SZ_4K -#define UART0_VIRT 0xF0001000 +#define UART1_PHYS 0xE0001000 +#define UART_SIZE SZ_4K +#define UART_VIRT 0xF0001000 #define TTC0_PHYS 0xF8001000 #define TTC0_SIZE SZ_4K @@ -36,12 +37,17 @@ #define SCU_PERIPH_SIZE SZ_8K #define SCU_PERIPH_VIRT (TTC0_VIRT - SCU_PERIPH_SIZE) +#if IS_ENABLED(CONFIG_DEBUG_ZYNQ_UART1) +# define LL_UART_PADDR UART1_PHYS +#else +# define LL_UART_PADDR UART0_PHYS +#endif + +#define LL_UART_VADDR UART_VIRT + /* The following are intended for the devices that are mapped early */ #define TTC0_BASE IOMEM(TTC0_VIRT) #define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT) -#define LL_UART_PADDR UART0_PHYS -#define LL_UART_VADDR UART0_VIRT - #endif diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c index c2c96cc7d6e7..9662306aa12f 100644 --- a/arch/arm/mach-zynq/timer.c +++ b/arch/arm/mach-zynq/timer.c @@ -23,32 +23,15 @@ #include <linux/clocksource.h> #include <linux/clockchips.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/slab.h> +#include <linux/clk-provider.h> -#include <asm/mach/time.h> #include <mach/zynq_soc.h> #include "common.h" -#define IRQ_TIMERCOUNTER0 42 - -/* - * This driver configures the 2 16-bit count-up timers as follows: - * - * T1: Timer 1, clocksource for generic timekeeping - * T2: Timer 2, clockevent source for hrtimers - * T3: Timer 3, <unused> - * - * The input frequency to the timer module for emulation is 2.5MHz which is - * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32, - * the timers are clocked at 78.125KHz (12.8 us resolution). - * - * The input frequency to the timer module in silicon will be 200MHz. With the - * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution). - */ -#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */ -#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */ - -#define XTTCPSS_TIMER_BASE TTC0_BASE -#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1) /* * Timer Register Offset Definitions of Timer 1, Increment base address by 4 * and use same offsets for Timer 2 @@ -65,9 +48,14 @@ #define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1 -/* Setup the timers to use pre-scaling */ - -#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32) +/* Setup the timers to use pre-scaling, using a fixed value for now that will + * work across most input frequency, but it may need to be more dynamic + */ +#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ +#define PRESCALE 2048 /* The exponent must match this */ +#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1) +#define CLK_CNTRL_PRESCALE_EN 1 +#define CNT_CNTRL_RESET (1<<4) /** * struct xttcpss_timer - This definition defines local timer structure @@ -75,11 +63,25 @@ * @base_addr: Base address of timer **/ struct xttcpss_timer { - void __iomem *base_addr; + void __iomem *base_addr; }; -static struct xttcpss_timer timers[2]; -static struct clock_event_device xttcpss_clockevent; +struct xttcpss_timer_clocksource { + struct xttcpss_timer xttc; + struct clocksource cs; +}; + +#define to_xttcpss_timer_clksrc(x) \ + container_of(x, struct xttcpss_timer_clocksource, cs) + +struct xttcpss_timer_clockevent { + struct xttcpss_timer xttc; + struct clock_event_device ce; + struct clk *clk; +}; + +#define to_xttcpss_timer_clkevent(x) \ + container_of(x, struct xttcpss_timer_clockevent, ce) /** * xttcpss_set_interval - Set the timer interval value @@ -101,7 +103,7 @@ static void xttcpss_set_interval(struct xttcpss_timer *timer, /* Reset the counter (0x10) so that it starts from 0, one-shot mode makes this needed for timing to be right. */ - ctrl_reg |= 0x10; + ctrl_reg |= CNT_CNTRL_RESET; ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); } @@ -116,90 +118,31 @@ static void xttcpss_set_interval(struct xttcpss_timer *timer, **/ static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id) { - struct clock_event_device *evt = &xttcpss_clockevent; - struct xttcpss_timer *timer = dev_id; + struct xttcpss_timer_clockevent *xttce = dev_id; + struct xttcpss_timer *timer = &xttce->xttc; /* Acknowledge the interrupt and call event handler */ __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET), timer->base_addr + XTTCPSS_ISR_OFFSET); - evt->event_handler(evt); + xttce->ce.event_handler(&xttce->ce); return IRQ_HANDLED; } -static struct irqaction event_timer_irq = { - .name = "xttcpss clockevent", - .flags = IRQF_DISABLED | IRQF_TIMER, - .handler = xttcpss_clock_event_interrupt, -}; - /** - * xttcpss_timer_hardware_init - Initialize the timer hardware - * - * Initialize the hardware to start the clock source, get the clock - * event timer ready to use, and hook up the interrupt. - **/ -static void __init xttcpss_timer_hardware_init(void) -{ - /* Setup the clock source counter to be an incrementing counter - * with no interrupt and it rolls over at 0xFFFF. Pre-scale - it by 32 also. Let it start running now. - */ - timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE; - - __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr + - XTTCPSS_IER_OFFSET); - __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr + - XTTCPSS_CLK_CNTRL_OFFSET); - __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - - /* Setup the clock event timer to be an interval timer which - * is prescaled by 32 using the interval interrupt. Leave it - * disabled for now. - */ - - timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4; - - __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr + - XTTCPSS_CNT_CNTRL_OFFSET); - __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr + - XTTCPSS_CLK_CNTRL_OFFSET); - __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr + - XTTCPSS_IER_OFFSET); - - /* Setup IRQ the clock event timer */ - event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT]; - setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq); -} - -/** - * __raw_readl_cycles - Reads the timer counter register + * __xttc_clocksource_read - Reads the timer counter register * * returns: Current timer counter register value **/ -static cycle_t __raw_readl_cycles(struct clocksource *cs) +static cycle_t __xttc_clocksource_read(struct clocksource *cs) { - struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE]; + struct xttcpss_timer *timer = &to_xttcpss_timer_clksrc(cs)->xttc; return (cycle_t)__raw_readl(timer->base_addr + XTTCPSS_COUNT_VAL_OFFSET); } - -/* - * Instantiate and initialize the clock source structure - */ -static struct clocksource clocksource_xttcpss = { - .name = "xttcpss_timer1", - .rating = 200, /* Reasonable clock source */ - .read = __raw_readl_cycles, - .mask = CLOCKSOURCE_MASK(16), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - - /** * xttcpss_set_next_event - Sets the time interval for next event * @@ -211,7 +154,8 @@ static struct clocksource clocksource_xttcpss = { static int xttcpss_set_next_event(unsigned long cycles, struct clock_event_device *evt) { - struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt); + struct xttcpss_timer *timer = &xttce->xttc; xttcpss_set_interval(timer, cycles); return 0; @@ -226,12 +170,15 @@ static int xttcpss_set_next_event(unsigned long cycles, static void xttcpss_set_mode(enum clock_event_mode mode, struct clock_event_device *evt) { - struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt); + struct xttcpss_timer *timer = &xttce->xttc; u32 ctrl_reg; switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - xttcpss_set_interval(timer, TIMER_RATE / HZ); + xttcpss_set_interval(timer, + DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk), + PRESCALE * HZ)); break; case CLOCK_EVT_MODE_ONESHOT: case CLOCK_EVT_MODE_UNUSED: @@ -252,15 +199,106 @@ static void xttcpss_set_mode(enum clock_event_mode mode, } } -/* - * Instantiate and initialize the clock event structure - */ -static struct clock_event_device xttcpss_clockevent = { - .name = "xttcpss_timer2", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = xttcpss_set_next_event, - .set_mode = xttcpss_set_mode, - .rating = 200, +static void __init zynq_ttc_setup_clocksource(struct device_node *np, + void __iomem *base) +{ + struct xttcpss_timer_clocksource *ttccs; + struct clk *clk; + int err; + u32 reg; + + ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL); + if (WARN_ON(!ttccs)) + return; + + err = of_property_read_u32(np, "reg", ®); + if (WARN_ON(err)) + return; + + clk = of_clk_get_by_name(np, "cpu_1x"); + if (WARN_ON(IS_ERR(clk))) + return; + + err = clk_prepare_enable(clk); + if (WARN_ON(err)) + return; + + ttccs->xttc.base_addr = base + reg * 4; + + ttccs->cs.name = np->name; + ttccs->cs.rating = 200; + ttccs->cs.read = __xttc_clocksource_read; + ttccs->cs.mask = CLOCKSOURCE_MASK(16); + ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; + + __raw_writel(0x0, ttccs->xttc.base_addr + XTTCPSS_IER_OFFSET); + __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttccs->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(CNT_CNTRL_RESET, + ttccs->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + + err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE); + if (WARN_ON(err)) + return; +} + +static void __init zynq_ttc_setup_clockevent(struct device_node *np, + void __iomem *base) +{ + struct xttcpss_timer_clockevent *ttcce; + int err, irq; + u32 reg; + + ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL); + if (WARN_ON(!ttcce)) + return; + + err = of_property_read_u32(np, "reg", ®); + if (WARN_ON(err)) + return; + + ttcce->xttc.base_addr = base + reg * 4; + + ttcce->clk = of_clk_get_by_name(np, "cpu_1x"); + if (WARN_ON(IS_ERR(ttcce->clk))) + return; + + err = clk_prepare_enable(ttcce->clk); + if (WARN_ON(err)) + return; + + irq = irq_of_parse_and_map(np, 0); + if (WARN_ON(!irq)) + return; + + ttcce->ce.name = np->name; + ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + ttcce->ce.set_next_event = xttcpss_set_next_event; + ttcce->ce.set_mode = xttcpss_set_mode; + ttcce->ce.rating = 200; + ttcce->ce.irq = irq; + + __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttcce->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(0x1, ttcce->xttc.base_addr + XTTCPSS_IER_OFFSET); + + err = request_irq(irq, xttcpss_clock_event_interrupt, IRQF_TIMER, + np->name, ttcce); + if (WARN_ON(err)) + return; + + clockevents_config_and_register(&ttcce->ce, + clk_get_rate(ttcce->clk) / PRESCALE, + 1, 0xfffe); +} + +static const __initconst struct of_device_id zynq_ttc_match[] = { + { .compatible = "xlnx,ttc-counter-clocksource", + .data = zynq_ttc_setup_clocksource, }, + { .compatible = "xlnx,ttc-counter-clockevent", + .data = zynq_ttc_setup_clockevent, }, + {} }; /** @@ -269,30 +307,27 @@ static struct clock_event_device xttcpss_clockevent = { * Initializes the timer hardware and register the clock source and clock event * timers with Linux kernal timer framework **/ -static void __init xttcpss_timer_init(void) +void __init xttcpss_timer_init(void) { - xttcpss_timer_hardware_init(); - clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE); - - /* Calculate the parameters to allow the clockevent to operate using - integer math - */ - clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4); - - xttcpss_clockevent.max_delta_ns = - clockevent_delta2ns(0xfffe, &xttcpss_clockevent); - xttcpss_clockevent.min_delta_ns = - clockevent_delta2ns(1, &xttcpss_clockevent); - - /* Indicate that clock event is on 1st CPU as SMP boot needs it */ - - xttcpss_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&xttcpss_clockevent); + struct device_node *np; + + for_each_compatible_node(np, NULL, "xlnx,ttc") { + struct device_node *np_chld; + void __iomem *base; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + for_each_available_child_of_node(np, np_chld) { + int (*cb)(struct device_node *np, void __iomem *base); + const struct of_device_id *match; + + match = of_match_node(zynq_ttc_match, np_chld); + if (match) { + cb = match->data; + cb(np_chld, base); + } + } + } } - -/* - * Instantiate and initialize the system timer structure - */ -struct sys_timer xttcpss_sys_timer = { - .init = xttcpss_timer_init, -}; diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index 1867944415ca..8db0b981ca64 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -41,7 +41,7 @@ void __init orion_irq_init(unsigned int irq_start, void __iomem *maskaddr) static int __init orion_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - int i = 0, irq_gpio; + int i = 0; void __iomem *base; do { @@ -54,10 +54,6 @@ static int __init orion_add_irq_domain(struct device_node *np, irq_domain_add_legacy(np, i * 32, 0, 0, &irq_domain_simple_ops, NULL); - - irq_gpio = i * 32; - orion_gpio_of_init(irq_gpio); - return 0; } diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index a17d7b3e3725..bc50b20a8ffc 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -929,6 +929,7 @@ struct platform_device s5p_device_mfc_r = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; + #endif /* CONFIG_S5P_DEV_MFC */ /* MIPI CSIS */ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 5da4b4f38f40..133e3e4170fb 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -133,8 +133,6 @@ extern struct platform_device exynos4_device_pcm1; extern struct platform_device exynos4_device_pcm2; extern struct platform_device exynos4_device_spdif; -extern struct platform_device exynos_device_drm; - extern struct platform_device samsung_asoc_dma; extern struct platform_device samsung_asoc_idma; extern struct platform_device samsung_device_keypad; diff --git a/arch/arm/plat-samsung/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h index ac13227272f0..e6d7c42d68b6 100644 --- a/arch/arm/plat-samsung/include/plat/mfc.h +++ b/arch/arm/plat-samsung/include/plat/mfc.h @@ -10,6 +10,14 @@ #ifndef __PLAT_SAMSUNG_MFC_H #define __PLAT_SAMSUNG_MFC_H __FILE__ +struct s5p_mfc_dt_meminfo { + unsigned long loff; + unsigned long lsize; + unsigned long roff; + unsigned long rsize; + char *compatible; +}; + /** * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver * @rbase: base address for MFC 'right' memory interface @@ -24,4 +32,7 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, phys_addr_t lbase, unsigned int lsize); +int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname, + int depth, void *data); + #endif /* __PLAT_SAMSUNG_MFC_H */ diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c index ad6089465e2a..5ec104b5408b 100644 --- a/arch/arm/plat-samsung/s5p-dev-mfc.c +++ b/arch/arm/plat-samsung/s5p-dev-mfc.c @@ -14,6 +14,8 @@ #include <linux/dma-mapping.h> #include <linux/memblock.h> #include <linux/ioport.h> +#include <linux/of_fdt.h> +#include <linux/of.h> #include <mach/map.h> #include <plat/devs.h> @@ -69,3 +71,35 @@ static int __init s5p_mfc_memory_init(void) return 0; } device_initcall(s5p_mfc_memory_init); + +#ifdef CONFIG_OF +int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname, + int depth, void *data) +{ + __be32 *prop; + unsigned long len; + struct s5p_mfc_dt_meminfo *mfc_mem = data; + + if (!data) + return 0; + + if (!of_flat_dt_is_compatible(node, mfc_mem->compatible)) + return 0; + + prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len); + if (!prop || (len != 2 * sizeof(unsigned long))) + return 0; + + mfc_mem->loff = be32_to_cpu(prop[0]); + mfc_mem->lsize = be32_to_cpu(prop[1]); + + prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len); + if (!prop || (len != 2 * sizeof(unsigned long))) + return 0; + + mfc_mem->roff = be32_to_cpu(prop[0]); + mfc_mem->rsize = be32_to_cpu(prop[1]); + + return 1; +} +#endif |